2 * TP-LINK TL-WR1043ND board support
4 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
14 #include <asm/mips_machine.h>
15 #include <asm/mach-ar71xx/ar71xx.h>
18 #include "dev-m25p80.h"
19 #include "dev-ar913x-wmac.h"
20 #include "dev-gpio-buttons.h"
21 #include "dev-leds-gpio.h"
23 #define TL_WR1043ND_GPIO_LED_USB 1
24 #define TL_WR1043ND_GPIO_LED_SYSTEM 2
25 #define TL_WR1043ND_GPIO_LED_QSS 5
26 #define TL_WR1043ND_GPIO_LED_WLAN 9
28 #define TL_WR1043ND_GPIO_BTN_RESET 3
29 #define TL_WR1043ND_GPIO_BTN_QSS 7
31 #define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20
33 #ifdef CONFIG_MTD_PARTITIONS
34 static struct mtd_partition tl_wr1043nd_partitions
[] = {
39 .mask_flags
= MTD_WRITEABLE
,
52 .mask_flags
= MTD_WRITEABLE
,
59 #endif /* CONFIG_MTD_PARTITIONS */
61 static struct flash_platform_data tl_wr1043nd_flash_data
= {
62 #ifdef CONFIG_MTD_PARTITIONS
63 .parts
= tl_wr1043nd_partitions
,
64 .nr_parts
= ARRAY_SIZE(tl_wr1043nd_partitions
),
68 static struct gpio_led tl_wr1043nd_leds_gpio
[] __initdata
= {
70 .name
= "tl-wr1043nd:green:usb",
71 .gpio
= TL_WR1043ND_GPIO_LED_USB
,
74 .name
= "tl-wr1043nd:green:system",
75 .gpio
= TL_WR1043ND_GPIO_LED_SYSTEM
,
78 .name
= "tl-wr1043nd:green:qss",
79 .gpio
= TL_WR1043ND_GPIO_LED_QSS
,
82 .name
= "tl-wr1043nd:green:wlan",
83 .gpio
= TL_WR1043ND_GPIO_LED_WLAN
,
88 static struct gpio_button tl_wr1043nd_gpio_buttons
[] __initdata
= {
94 .gpio
= TL_WR1043ND_GPIO_BTN_RESET
,
101 .gpio
= TL_WR1043ND_GPIO_BTN_QSS
,
106 static void __init
tl_wr1043nd_setup(void)
108 u8
*mac
= (u8
*) KSEG1ADDR(0x1f01fc00);
110 ar71xx_set_mac_base(mac
);
112 ar71xx_add_device_mdio(0x0);
114 ar71xx_eth0_data
.phy_if_mode
= PHY_INTERFACE_MODE_RGMII
;
115 ar71xx_eth0_data
.phy_mask
= 0x0;
116 ar71xx_eth0_data
.speed
= SPEED_1000
;
117 ar71xx_eth0_data
.duplex
= DUPLEX_FULL
;
119 ar71xx_add_device_eth(0);
121 ar71xx_add_device_usb();
123 ar71xx_add_device_m25p80(&tl_wr1043nd_flash_data
);
125 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio
),
126 tl_wr1043nd_leds_gpio
);
128 ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL
,
129 ARRAY_SIZE(tl_wr1043nd_gpio_buttons
),
130 tl_wr1043nd_gpio_buttons
);
131 ar913x_add_device_wmac();
134 MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND
, "TP-LINK TL-WR1043ND", tl_wr1043nd_setup
);