Add the RDC PCI ids for a fancier PCI device table.Return the system name on boot.
[openwrt.git] / target / linux / amcc / patches / 100-taishan_emac.patch
1 diff -Nur linux-2.6.21/drivers/net/ibm_emac/ibm_emac_phy.c linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_phy.c
2 --- linux-2.6.21/drivers/net/ibm_emac/ibm_emac_phy.c 2007-04-27 23:49:26.000000000 +0200
3 +++ linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_phy.c 2007-05-28 16:27:15.000000000 +0200
4 @@ -299,11 +299,50 @@
5 .ops = &cis8201_phy_ops
6 };
7
8 +#if defined(CONFIG_TAISHAN)
9 +static int et1011c_init(struct mii_phy *phy)
10 +{
11 + u16 reg_short;
12 +
13 + reg_short = (u16)(phy_read(phy,0x16));
14 + reg_short &= ~(0x7);
15 + reg_short |= 0x6; /* RGMII Trace Delay*/
16 + phy_write(phy, 0x16, reg_short);
17 +
18 + reg_short = (u16)(phy_read(phy, 0x17));
19 + reg_short &= ~(0x40);
20 + phy_write(phy, 0x17, reg_short);
21 +
22 + phy_write(phy,0x1c,0x74f0);
23 + return 0;
24 +}
25 +
26 +static struct mii_phy_ops et1011c_phy_ops = {
27 + .init = et1011c_init,
28 + .setup_aneg = genmii_setup_aneg,
29 + .setup_forced = genmii_setup_forced,
30 + .poll_link = genmii_poll_link,
31 + .read_link = genmii_read_link
32 +};
33 +
34 +static struct mii_phy_def et1011c_phy_def = {
35 + .phy_id = 0x0282f000,
36 + .phy_id_mask = 0x0fffff00,
37 + .name = "ET1011C Gigabit Ethernet",
38 + .ops = &et1011c_phy_ops
39 +};
40 +
41 +static struct mii_phy_def *mii_phy_table[] = {
42 + &et1011c_phy_def,
43 + NULL
44 +};
45 +#else
46 static struct mii_phy_def *mii_phy_table[] = {
47 &cis8201_phy_def,
48 &genmii_phy_def,
49 NULL
50 };
51 +#endif
52
53 int mii_phy_probe(struct mii_phy *phy, int address)
54 {
55 diff -Nur linux-2.6.21/drivers/net/ibm_emac/ibm_emac_zmii.c linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_zmii.c
56 --- linux-2.6.21/drivers/net/ibm_emac/ibm_emac_zmii.c 2007-04-27 23:49:26.000000000 +0200
57 +++ linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_zmii.c 2007-05-28 16:26:48.000000000 +0200
58 @@ -170,6 +170,13 @@
59 struct ocp_func_emac_data *emacdata = dev->def->additions;
60
61 if (emacdata->zmii_idx >= 0) {
62 +#if defined(CONFIG_TAISHAN)
63 + /* don't attach emac0 and emac1 */
64 + if( dev->def->index < 2 )
65 + {
66 + return -ENODEV;
67 + }
68 +#endif
69 dev->zmii_input = emacdata->zmii_mux;
70 dev->zmii_dev =
71 ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII,
This page took 0.04237 seconds and 5 git commands to generate.