2 * ar8216.c: AR8216 switch driver
4 * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version 2
9 * of the License, or (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/list.h>
21 #include <linux/if_ether.h>
22 #include <linux/skbuff.h>
23 #include <linux/netdevice.h>
24 #include <linux/netlink.h>
25 #include <linux/bitops.h>
26 #include <net/genetlink.h>
27 #include <linux/switch.h>
28 #include <linux/delay.h>
29 #include <linux/phy.h>
30 #include <linux/netdevice.h>
31 #include <linux/etherdevice.h>
34 /* size of the vlan table */
35 #define AR8X16_MAX_VLANS 128
36 #define AR8X16_PROBE_RETRIES 10
39 struct switch_dev dev
;
40 struct phy_device
*phy
;
41 u32 (*read
)(struct ar8216_priv
*priv
, int reg
);
42 void (*write
)(struct ar8216_priv
*priv
, int reg
, u32 val
);
43 const struct net_device_ops
*ndo_old
;
44 struct net_device_ops ndo
;
45 struct mutex reg_mutex
;
53 /* all fields below are cleared on reset */
55 u16 vlan_id
[AR8X16_MAX_VLANS
];
56 u8 vlan_table
[AR8X16_MAX_VLANS
];
58 u16 pvid
[AR8216_NUM_PORTS
];
61 #define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
64 split_addr(u32 regaddr
, u16
*r1
, u16
*r2
, u16
*page
)
73 *page
= regaddr
& 0x1ff;
77 ar8216_mii_read(struct ar8216_priv
*priv
, int reg
)
79 struct phy_device
*phy
= priv
->phy
;
80 struct mii_bus
*bus
= phy
->bus
;
84 split_addr((u32
) reg
, &r1
, &r2
, &page
);
86 mutex_lock(&bus
->mdio_lock
);
88 bus
->write(bus
, 0x18, 0, page
);
89 msleep(1); /* wait for the page switch to propagate */
90 lo
= bus
->read(bus
, 0x10 | r2
, r1
);
91 hi
= bus
->read(bus
, 0x10 | r2
, r1
+ 1);
93 mutex_unlock(&bus
->mdio_lock
);
95 return (hi
<< 16) | lo
;
99 ar8216_mii_write(struct ar8216_priv
*priv
, int reg
, u32 val
)
101 struct phy_device
*phy
= priv
->phy
;
102 struct mii_bus
*bus
= phy
->bus
;
106 split_addr((u32
) reg
, &r1
, &r2
, &r3
);
108 hi
= (u16
) (val
>> 16);
110 mutex_lock(&bus
->mdio_lock
);
112 bus
->write(bus
, 0x18, 0, r3
);
113 msleep(1); /* wait for the page switch to propagate */
114 bus
->write(bus
, 0x10 | r2
, r1
+ 1, hi
);
115 bus
->write(bus
, 0x10 | r2
, r1
, lo
);
117 mutex_unlock(&bus
->mdio_lock
);
121 ar8216_rmw(struct ar8216_priv
*priv
, int reg
, u32 mask
, u32 val
)
125 v
= priv
->read(priv
, reg
);
128 priv
->write(priv
, reg
, v
);
134 ar8216_id_chip(struct ar8216_priv
*priv
)
140 priv
->chip
= UNKNOWN
;
142 val
= ar8216_mii_read(priv
, AR8216_REG_CTRL
);
146 id
= val
& (AR8216_CTRL_REVISION
| AR8216_CTRL_VERSION
);
147 for (i
= 0; i
< AR8X16_PROBE_RETRIES
; i
++) {
150 val
= ar8216_mii_read(priv
, AR8216_REG_CTRL
);
154 t
= val
& (AR8216_CTRL_REVISION
| AR8216_CTRL_VERSION
);
172 "ar8216: Unknown Atheros device [ver=%d, rev=%d, phy_id=%04x%04x]\n",
173 (int)(id
>> AR8216_CTRL_VERSION_S
),
174 (int)(id
& AR8216_CTRL_REVISION
),
175 mdiobus_read(priv
->phy
->bus
, priv
->phy
->addr
, 2),
176 mdiobus_read(priv
->phy
->bus
, priv
->phy
->addr
, 3));
185 ar8216_read_port_link(struct ar8216_priv
*priv
, int port
,
186 struct switch_port_link
*link
)
191 memset(link
, '\0', sizeof(*link
));
193 status
= priv
->read(priv
, AR8216_REG_PORT_STATUS(port
));
195 link
->aneg
= !!(status
& AR8216_PORT_STATUS_LINK_AUTO
);
197 link
->link
= !!(status
& AR8216_PORT_STATUS_LINK_UP
);
204 link
->duplex
= !!(status
& AR8216_PORT_STATUS_DUPLEX
);
205 link
->tx_flow
= !!(status
& AR8216_PORT_STATUS_TXFLOW
);
206 link
->rx_flow
= !!(status
& AR8216_PORT_STATUS_RXFLOW
);
208 speed
= (status
& AR8216_PORT_STATUS_SPEED
) >>
209 AR8216_PORT_STATUS_SPEED_S
;
212 case AR8216_PORT_SPEED_10M
:
213 link
->speed
= SWITCH_PORT_SPEED_10
;
215 case AR8216_PORT_SPEED_100M
:
216 link
->speed
= SWITCH_PORT_SPEED_100
;
218 case AR8216_PORT_SPEED_1000M
:
219 link
->speed
= SWITCH_PORT_SPEED_1000
;
222 link
->speed
= SWITCH_PORT_SPEED_UNKNOWN
;
228 ar8216_set_vlan(struct switch_dev
*dev
, const struct switch_attr
*attr
,
229 struct switch_val
*val
)
231 struct ar8216_priv
*priv
= to_ar8216(dev
);
232 priv
->vlan
= !!val
->value
.i
;
237 ar8216_get_vlan(struct switch_dev
*dev
, const struct switch_attr
*attr
,
238 struct switch_val
*val
)
240 struct ar8216_priv
*priv
= to_ar8216(dev
);
241 val
->value
.i
= priv
->vlan
;
247 ar8216_set_pvid(struct switch_dev
*dev
, int port
, int vlan
)
249 struct ar8216_priv
*priv
= to_ar8216(dev
);
251 /* make sure no invalid PVIDs get set */
253 if (vlan
>= dev
->vlans
)
256 priv
->pvid
[port
] = vlan
;
261 ar8216_get_pvid(struct switch_dev
*dev
, int port
, int *vlan
)
263 struct ar8216_priv
*priv
= to_ar8216(dev
);
264 *vlan
= priv
->pvid
[port
];
269 ar8216_set_vid(struct switch_dev
*dev
, const struct switch_attr
*attr
,
270 struct switch_val
*val
)
272 struct ar8216_priv
*priv
= to_ar8216(dev
);
273 priv
->vlan_id
[val
->port_vlan
] = val
->value
.i
;
278 ar8216_get_vid(struct switch_dev
*dev
, const struct switch_attr
*attr
,
279 struct switch_val
*val
)
281 struct ar8216_priv
*priv
= to_ar8216(dev
);
282 val
->value
.i
= priv
->vlan_id
[val
->port_vlan
];
287 ar8216_get_port_link(struct switch_dev
*dev
, int port
,
288 struct switch_port_link
*link
)
290 struct ar8216_priv
*priv
= to_ar8216(dev
);
292 ar8216_read_port_link(priv
, port
, link
);
297 ar8216_mangle_tx(struct sk_buff
*skb
, struct net_device
*dev
)
299 struct ar8216_priv
*priv
= dev
->phy_ptr
;
308 if (unlikely(skb_headroom(skb
) < 2)) {
309 if (pskb_expand_head(skb
, 2, 0, GFP_ATOMIC
) < 0)
313 buf
= skb_push(skb
, 2);
318 return priv
->ndo_old
->ndo_start_xmit(skb
, dev
);
321 dev_kfree_skb_any(skb
);
326 ar8216_mangle_rx(struct sk_buff
*skb
, int napi
)
328 struct ar8216_priv
*priv
;
329 struct net_device
*dev
;
341 /* don't strip the header if vlan mode is disabled */
345 /* strip header, get vlan id */
349 /* check for vlan header presence */
350 if ((buf
[12 + 2] != 0x81) || (buf
[13 + 2] != 0x00))
355 /* no need to fix up packets coming from a tagged source */
356 if (priv
->vlan_tagged
& (1 << port
))
359 /* lookup port vid from local table, the switch passes an invalid vlan id */
360 vlan
= priv
->vlan_id
[priv
->pvid
[port
]];
363 buf
[14 + 2] |= vlan
>> 8;
364 buf
[15 + 2] = vlan
& 0xff;
367 skb
->protocol
= eth_type_trans(skb
, skb
->dev
);
370 return netif_receive_skb(skb
);
372 return netif_rx(skb
);
375 /* no vlan? eat the packet! */
376 dev_kfree_skb_any(skb
);
381 ar8216_netif_rx(struct sk_buff
*skb
)
383 return ar8216_mangle_rx(skb
, 0);
387 ar8216_netif_receive_skb(struct sk_buff
*skb
)
389 return ar8216_mangle_rx(skb
, 1);
393 static struct switch_attr ar8216_globals
[] = {
395 .type
= SWITCH_TYPE_INT
,
396 .name
= "enable_vlan",
397 .description
= "Enable VLAN mode",
398 .set
= ar8216_set_vlan
,
399 .get
= ar8216_get_vlan
,
404 static struct switch_attr ar8216_port
[] = {
407 static struct switch_attr ar8216_vlan
[] = {
409 .type
= SWITCH_TYPE_INT
,
411 .description
= "VLAN ID (0-4094)",
412 .set
= ar8216_set_vid
,
413 .get
= ar8216_get_vid
,
420 ar8216_get_ports(struct switch_dev
*dev
, struct switch_val
*val
)
422 struct ar8216_priv
*priv
= to_ar8216(dev
);
423 u8 ports
= priv
->vlan_table
[val
->port_vlan
];
427 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++) {
428 struct switch_port
*p
;
430 if (!(ports
& (1 << i
)))
433 p
= &val
->value
.ports
[val
->len
++];
435 if (priv
->vlan_tagged
& (1 << i
))
436 p
->flags
= (1 << SWITCH_PORT_FLAG_TAGGED
);
444 ar8216_set_ports(struct switch_dev
*dev
, struct switch_val
*val
)
446 struct ar8216_priv
*priv
= to_ar8216(dev
);
447 u8
*vt
= &priv
->vlan_table
[val
->port_vlan
];
451 for (i
= 0; i
< val
->len
; i
++) {
452 struct switch_port
*p
= &val
->value
.ports
[i
];
454 if (p
->flags
& (1 << SWITCH_PORT_FLAG_TAGGED
))
455 priv
->vlan_tagged
|= (1 << p
->id
);
457 priv
->vlan_tagged
&= ~(1 << p
->id
);
458 priv
->pvid
[p
->id
] = val
->port_vlan
;
460 /* make sure that an untagged port does not
461 * appear in other vlans */
462 for (j
= 0; j
< AR8X16_MAX_VLANS
; j
++) {
463 if (j
== val
->port_vlan
)
465 priv
->vlan_table
[j
] &= ~(1 << p
->id
);
475 ar8216_wait_bit(struct ar8216_priv
*priv
, int reg
, u32 mask
, u32 val
)
481 t
= priv
->read(priv
, reg
);
482 if ((t
& mask
) == val
)
491 pr_err("ar8216: timeout on reg %08x: %08x & %08x != %08x\n",
492 (unsigned int) reg
, t
, mask
, val
);
497 ar8216_vtu_op(struct ar8216_priv
*priv
, u32 op
, u32 val
)
499 if (ar8216_wait_bit(priv
, AR8216_REG_VTU
, AR8216_VTU_ACTIVE
, 0))
501 if ((op
& AR8216_VTU_OP
) == AR8216_VTU_OP_LOAD
) {
502 val
&= AR8216_VTUDATA_MEMBER
;
503 val
|= AR8216_VTUDATA_VALID
;
504 priv
->write(priv
, AR8216_REG_VTU_DATA
, val
);
506 op
|= AR8216_VTU_ACTIVE
;
507 priv
->write(priv
, AR8216_REG_VTU
, op
);
511 ar8216_setup_port(struct ar8216_priv
*priv
, int port
, u32 egress
, u32 ingress
,
512 u32 members
, u32 pvid
)
516 if (priv
->vlan
&& port
== AR8216_PORT_CPU
&& priv
->chip
== AR8216
)
517 header
= AR8216_PORT_CTRL_HEADER
;
521 ar8216_rmw(priv
, AR8216_REG_PORT_CTRL(port
),
522 AR8216_PORT_CTRL_LEARN
| AR8216_PORT_CTRL_VLAN_MODE
|
523 AR8216_PORT_CTRL_SINGLE_VLAN
| AR8216_PORT_CTRL_STATE
|
524 AR8216_PORT_CTRL_HEADER
| AR8216_PORT_CTRL_LEARN_LOCK
,
525 AR8216_PORT_CTRL_LEARN
| header
|
526 (egress
<< AR8216_PORT_CTRL_VLAN_MODE_S
) |
527 (AR8216_PORT_STATE_FORWARD
<< AR8216_PORT_CTRL_STATE_S
));
529 ar8216_rmw(priv
, AR8216_REG_PORT_VLAN(port
),
530 AR8216_PORT_VLAN_DEST_PORTS
| AR8216_PORT_VLAN_MODE
|
531 AR8216_PORT_VLAN_DEFAULT_ID
,
532 (members
<< AR8216_PORT_VLAN_DEST_PORTS_S
) |
533 (ingress
<< AR8216_PORT_VLAN_MODE_S
) |
534 (pvid
<< AR8216_PORT_VLAN_DEFAULT_ID_S
));
538 ar8236_setup_port(struct ar8216_priv
*priv
, int port
, u32 egress
, u32 ingress
,
539 u32 members
, u32 pvid
)
541 ar8216_rmw(priv
, AR8216_REG_PORT_CTRL(port
),
542 AR8216_PORT_CTRL_LEARN
| AR8216_PORT_CTRL_VLAN_MODE
|
543 AR8216_PORT_CTRL_SINGLE_VLAN
| AR8216_PORT_CTRL_STATE
|
544 AR8216_PORT_CTRL_HEADER
| AR8216_PORT_CTRL_LEARN_LOCK
,
545 AR8216_PORT_CTRL_LEARN
|
546 (egress
<< AR8216_PORT_CTRL_VLAN_MODE_S
) |
547 (AR8216_PORT_STATE_FORWARD
<< AR8216_PORT_CTRL_STATE_S
));
549 ar8216_rmw(priv
, AR8236_REG_PORT_VLAN(port
),
550 AR8236_PORT_VLAN_DEFAULT_ID
,
551 (pvid
<< AR8236_PORT_VLAN_DEFAULT_ID_S
));
553 ar8216_rmw(priv
, AR8236_REG_PORT_VLAN2(port
),
554 AR8236_PORT_VLAN2_VLAN_MODE
|
555 AR8236_PORT_VLAN2_MEMBER
,
556 (ingress
<< AR8236_PORT_VLAN2_VLAN_MODE_S
) |
557 (members
<< AR8236_PORT_VLAN2_MEMBER_S
));
561 ar8216_hw_apply(struct switch_dev
*dev
)
563 struct ar8216_priv
*priv
= to_ar8216(dev
);
564 u8 portmask
[AR8216_NUM_PORTS
];
567 mutex_lock(&priv
->reg_mutex
);
568 /* flush all vlan translation unit entries */
569 ar8216_vtu_op(priv
, AR8216_VTU_OP_FLUSH
, 0);
571 memset(portmask
, 0, sizeof(portmask
));
573 /* calculate the port destination masks and load vlans
574 * into the vlan translation unit */
575 for (j
= 0; j
< AR8X16_MAX_VLANS
; j
++) {
576 u8 vp
= priv
->vlan_table
[j
];
581 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++) {
584 portmask
[i
] |= vp
& ~mask
;
589 (priv
->vlan_id
[j
] << AR8216_VTU_VID_S
),
590 priv
->vlan_table
[j
]);
594 * isolate all ports, but connect them to the cpu port */
595 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++) {
596 if (i
== AR8216_PORT_CPU
)
599 portmask
[i
] = 1 << AR8216_PORT_CPU
;
600 portmask
[AR8216_PORT_CPU
] |= (1 << i
);
604 /* update the port destination mask registers and tag settings */
605 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++) {
610 pvid
= priv
->vlan_id
[priv
->pvid
[i
]];
616 if (priv
->vlan_tagged
& (1 << i
))
617 egress
= AR8216_OUT_ADD_VLAN
;
619 egress
= AR8216_OUT_STRIP_VLAN
;
621 egress
= AR8216_OUT_KEEP
;
624 ingress
= AR8216_IN_SECURE
;
626 ingress
= AR8216_IN_PORT_ONLY
;
629 if (priv
->chip
== AR8236
)
630 ar8236_setup_port(priv
, i
, egress
, ingress
, portmask
[i
],
633 ar8216_setup_port(priv
, i
, egress
, ingress
, portmask
[i
],
636 mutex_unlock(&priv
->reg_mutex
);
641 ar8216_hw_init(struct ar8216_priv
*priv
)
643 /* XXX: undocumented magic from atheros, required! */
644 priv
->write(priv
, 0x38, 0xc000050e);
646 ar8216_rmw(priv
, AR8216_REG_GLOBAL_CTRL
,
647 AR8216_GCTRL_MTU
, 1518 + 8 + 2);
652 ar8236_hw_init(struct ar8216_priv
*priv
) {
653 static int initialized
;
660 /* Initialize the PHYs */
661 bus
= priv
->phy
->bus
;
662 for (i
= 0; i
< 5; i
++) {
663 mdiobus_write(bus
, i
, MII_ADVERTISE
,
664 ADVERTISE_ALL
| ADVERTISE_PAUSE_CAP
|
665 ADVERTISE_PAUSE_ASYM
);
666 mdiobus_write(bus
, i
, MII_BMCR
, BMCR_RESET
| BMCR_ANENABLE
);
670 /* enable jumbo frames */
671 ar8216_rmw(priv
, AR8216_REG_GLOBAL_CTRL
,
672 AR8316_GCTRL_MTU
, 9018 + 8 + 2);
679 ar8316_hw_init(struct ar8216_priv
*priv
) {
684 val
= priv
->read(priv
, 0x8);
686 if (priv
->phy
->interface
== PHY_INTERFACE_MODE_RGMII
) {
687 if (priv
->port4_phy
) {
688 /* value taken from Ubiquiti RouterStation Pro */
690 printk(KERN_INFO
"ar8316: Using port 4 as PHY\n");
693 printk(KERN_INFO
"ar8316: Using port 4 as switch port\n");
695 } else if (priv
->phy
->interface
== PHY_INTERFACE_MODE_GMII
) {
696 /* value taken from AVM Fritz!Box 7390 sources */
699 /* no known value for phy interface */
700 printk(KERN_ERR
"ar8316: unsupported mii mode: %d.\n",
701 priv
->phy
->interface
);
708 priv
->write(priv
, 0x8, newval
);
710 /* standard atheros magic */
711 priv
->write(priv
, 0x38, 0xc000050e);
713 /* Initialize the ports */
714 bus
= priv
->phy
->bus
;
715 for (i
= 0; i
< 5; i
++) {
716 if ((i
== 4) && priv
->port4_phy
&&
717 priv
->phy
->interface
== PHY_INTERFACE_MODE_RGMII
) {
718 /* work around for phy4 rgmii mode */
719 mdiobus_write(bus
, i
, MII_ATH_DBG_ADDR
, 0x12);
720 mdiobus_write(bus
, i
, MII_ATH_DBG_DATA
, 0x480c);
722 mdiobus_write(bus
, i
, MII_ATH_DBG_ADDR
, 0x0);
723 mdiobus_write(bus
, i
, MII_ATH_DBG_DATA
, 0x824e);
725 mdiobus_write(bus
, i
, MII_ATH_DBG_ADDR
, 0x5);
726 mdiobus_write(bus
, i
, MII_ATH_DBG_DATA
, 0x3d47);
730 /* initialize the port itself */
731 mdiobus_write(bus
, i
, MII_ADVERTISE
,
732 ADVERTISE_ALL
| ADVERTISE_PAUSE_CAP
| ADVERTISE_PAUSE_ASYM
);
733 mdiobus_write(bus
, i
, MII_CTRL1000
, ADVERTISE_1000FULL
);
734 mdiobus_write(bus
, i
, MII_BMCR
, BMCR_RESET
| BMCR_ANENABLE
);
738 /* enable jumbo frames */
739 ar8216_rmw(priv
, AR8216_REG_GLOBAL_CTRL
,
740 AR8316_GCTRL_MTU
, 9018 + 8 + 2);
742 /* enable cpu port to receive multicast and broadcast frames */
743 priv
->write(priv
, AR8216_REG_FLOOD_MASK
, 0x003f003f);
746 priv
->initialized
= true;
751 ar8216_init_port(struct ar8216_priv
*priv
, int port
)
753 /* Enable port learning and tx */
754 priv
->write(priv
, AR8216_REG_PORT_CTRL(port
),
755 AR8216_PORT_CTRL_LEARN
|
756 (4 << AR8216_PORT_CTRL_STATE_S
));
758 priv
->write(priv
, AR8216_REG_PORT_VLAN(port
), 0);
760 if (port
== AR8216_PORT_CPU
) {
761 priv
->write(priv
, AR8216_REG_PORT_STATUS(port
),
762 AR8216_PORT_STATUS_LINK_UP
|
763 ((priv
->chip
== AR8316
) ?
764 AR8216_PORT_SPEED_1000M
: AR8216_PORT_SPEED_100M
) |
765 AR8216_PORT_STATUS_TXMAC
|
766 AR8216_PORT_STATUS_RXMAC
|
767 ((priv
->chip
== AR8316
) ? AR8216_PORT_STATUS_RXFLOW
: 0) |
768 ((priv
->chip
== AR8316
) ? AR8216_PORT_STATUS_TXFLOW
: 0) |
769 AR8216_PORT_STATUS_DUPLEX
);
771 priv
->write(priv
, AR8216_REG_PORT_STATUS(port
),
772 AR8216_PORT_STATUS_LINK_AUTO
);
777 ar8216_reset_switch(struct switch_dev
*dev
)
779 struct ar8216_priv
*priv
= to_ar8216(dev
);
782 mutex_lock(&priv
->reg_mutex
);
783 memset(&priv
->vlan
, 0, sizeof(struct ar8216_priv
) -
784 offsetof(struct ar8216_priv
, vlan
));
785 for (i
= 0; i
< AR8X16_MAX_VLANS
; i
++) {
786 priv
->vlan_id
[i
] = i
;
789 /* Configure all ports */
790 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++)
791 ar8216_init_port(priv
, i
);
793 mutex_unlock(&priv
->reg_mutex
);
794 return ar8216_hw_apply(dev
);
798 static const struct switch_dev_ops ar8216_ops
= {
800 .attr
= ar8216_globals
,
801 .n_attr
= ARRAY_SIZE(ar8216_globals
),
805 .n_attr
= ARRAY_SIZE(ar8216_port
),
809 .n_attr
= ARRAY_SIZE(ar8216_vlan
),
811 .get_port_pvid
= ar8216_get_pvid
,
812 .set_port_pvid
= ar8216_set_pvid
,
813 .get_vlan_ports
= ar8216_get_ports
,
814 .set_vlan_ports
= ar8216_set_ports
,
815 .apply_config
= ar8216_hw_apply
,
816 .reset_switch
= ar8216_reset_switch
,
817 .get_port_link
= ar8216_get_port_link
,
821 ar8216_config_init(struct phy_device
*pdev
)
823 struct ar8216_priv
*priv
= pdev
->priv
;
824 struct net_device
*dev
= pdev
->attached_dev
;
825 struct switch_dev
*swdev
;
829 priv
= kzalloc(sizeof(struct ar8216_priv
), GFP_KERNEL
);
836 ret
= ar8216_id_chip(priv
);
840 if (pdev
->addr
!= 0) {
841 if (priv
->chip
== AR8316
) {
842 pdev
->supported
|= SUPPORTED_1000baseT_Full
;
843 pdev
->advertising
|= ADVERTISED_1000baseT_Full
;
845 /* check if we're attaching to the switch twice */
846 pdev
= pdev
->bus
->phy_map
[0];
852 /* switch device has not been initialized, reuse priv */
854 priv
->port4_phy
= true;
861 /* switch device has been initialized, reinit */
863 priv
->dev
.ports
= (AR8216_NUM_PORTS
- 1);
864 priv
->initialized
= false;
865 priv
->port4_phy
= true;
866 ar8316_hw_init(priv
);
874 printk(KERN_INFO
"%s: AR%d switch driver attached.\n",
875 pdev
->attached_dev
->name
, priv
->chip
);
877 pdev
->supported
= priv
->chip
== AR8316
?
878 SUPPORTED_1000baseT_Full
: SUPPORTED_100baseT_Full
;
879 pdev
->advertising
= pdev
->supported
;
881 mutex_init(&priv
->reg_mutex
);
882 priv
->read
= ar8216_mii_read
;
883 priv
->write
= ar8216_mii_write
;
888 swdev
->cpu_port
= AR8216_PORT_CPU
;
889 swdev
->ops
= &ar8216_ops
;
890 swdev
->ports
= AR8216_NUM_PORTS
;
892 if (priv
->chip
== AR8316
) {
893 swdev
->name
= "Atheros AR8316";
894 swdev
->vlans
= AR8X16_MAX_VLANS
;
896 if (priv
->port4_phy
) {
897 /* port 5 connected to the other mac, therefore unusable */
898 swdev
->ports
= (AR8216_NUM_PORTS
- 1);
900 } else if (priv
->chip
== AR8236
) {
901 swdev
->name
= "Atheros AR8236";
902 swdev
->vlans
= AR8216_NUM_VLANS
;
903 swdev
->ports
= AR8216_NUM_PORTS
;
905 swdev
->name
= "Atheros AR8216";
906 swdev
->vlans
= AR8216_NUM_VLANS
;
909 ret
= register_switch(&priv
->dev
, pdev
->attached_dev
);
916 if (priv
->chip
== AR8216
)
917 ret
= ar8216_hw_init(priv
);
918 else if (priv
->chip
== AR8236
)
919 ret
= ar8236_hw_init(priv
);
920 else if (priv
->chip
== AR8316
)
921 ret
= ar8316_hw_init(priv
);
926 ret
= ar8216_reset_switch(&priv
->dev
);
932 /* VID fixup only needed on ar8216 */
933 if (pdev
->addr
== 0 && priv
->chip
== AR8216
) {
935 pdev
->netif_receive_skb
= ar8216_netif_receive_skb
;
936 pdev
->netif_rx
= ar8216_netif_rx
;
937 priv
->ndo_old
= dev
->netdev_ops
;
938 memcpy(&priv
->ndo
, priv
->ndo_old
, sizeof(struct net_device_ops
));
939 priv
->ndo
.ndo_start_xmit
= ar8216_mangle_tx
;
940 dev
->netdev_ops
= &priv
->ndo
;
953 ar8216_read_status(struct phy_device
*phydev
)
955 struct ar8216_priv
*priv
= phydev
->priv
;
956 struct switch_port_link link
;
958 if (phydev
->addr
!= 0) {
959 return genphy_read_status(phydev
);
962 ar8216_read_port_link(priv
, phydev
->addr
, &link
);
963 phydev
->link
= !!link
.link
;
967 switch (link
.speed
) {
968 case SWITCH_PORT_SPEED_10
:
969 phydev
->speed
= SPEED_10
;
971 case SWITCH_PORT_SPEED_100
:
972 phydev
->speed
= SPEED_100
;
974 case SWITCH_PORT_SPEED_1000
:
975 phydev
->speed
= SPEED_1000
;
980 phydev
->duplex
= link
.duplex
? DUPLEX_FULL
: DUPLEX_HALF
;
982 /* flush the address translation unit */
983 mutex_lock(&priv
->reg_mutex
);
984 ret
= ar8216_wait_bit(priv
, AR8216_REG_ATU
, AR8216_ATU_ACTIVE
, 0);
986 priv
->write(priv
, AR8216_REG_ATU
, AR8216_ATU_OP_FLUSH
);
987 mutex_unlock(&priv
->reg_mutex
);
989 phydev
->state
= PHY_RUNNING
;
990 netif_carrier_on(phydev
->attached_dev
);
991 phydev
->adjust_link(phydev
->attached_dev
);
997 ar8216_config_aneg(struct phy_device
*phydev
)
999 if (phydev
->addr
== 0)
1002 return genphy_config_aneg(phydev
);
1006 ar8216_probe(struct phy_device
*pdev
)
1008 struct ar8216_priv priv
;
1011 return ar8216_id_chip(&priv
);
1015 ar8216_remove(struct phy_device
*pdev
)
1017 struct ar8216_priv
*priv
= pdev
->priv
;
1018 struct net_device
*dev
= pdev
->attached_dev
;
1023 if (priv
->ndo_old
&& dev
)
1024 dev
->netdev_ops
= priv
->ndo_old
;
1025 if (pdev
->addr
== 0)
1026 unregister_switch(&priv
->dev
);
1030 static struct phy_driver ar8216_driver
= {
1031 .phy_id
= 0x004d0000,
1032 .name
= "Atheros AR8216/AR8236/AR8316",
1033 .phy_id_mask
= 0xffff0000,
1034 .features
= PHY_BASIC_FEATURES
,
1035 .probe
= ar8216_probe
,
1036 .remove
= ar8216_remove
,
1037 .config_init
= &ar8216_config_init
,
1038 .config_aneg
= &ar8216_config_aneg
,
1039 .read_status
= &ar8216_read_status
,
1040 .driver
= { .owner
= THIS_MODULE
},
1046 return phy_driver_register(&ar8216_driver
);
1052 phy_driver_unregister(&ar8216_driver
);
1055 module_init(ar8216_init
);
1056 module_exit(ar8216_exit
);
1057 MODULE_LICENSE("GPL");