3 Driver for the Marvell 8385 based compact flash WLAN cards.
5 (C) 2007 by Holger Schurig <hs4233@mail.mn-solutions.de>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; see the file COPYING. If not, write to
19 the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
20 Boston, MA 02110-1301, USA.
24 #include <linux/module.h>
25 #include <linux/delay.h>
26 #include <linux/moduleparam.h>
27 #include <linux/firmware.h>
28 #include <linux/netdevice.h>
30 #include <pcmcia/cs_types.h>
31 #include <pcmcia/cs.h>
32 #include <pcmcia/cistpl.h>
33 #include <pcmcia/ds.h>
37 #define DRV_NAME "libertas_cs"
44 /********************************************************************/
46 /********************************************************************/
48 MODULE_AUTHOR("Holger Schurig <hs4233@mail.mn-solutions.de>");
49 MODULE_DESCRIPTION("Driver for Marvell 83xx compact flash WLAN cards");
50 MODULE_LICENSE("GPL");
54 /********************************************************************/
56 /********************************************************************/
59 struct pcmcia_device
*p_dev
;
60 struct lbs_private
*priv
;
66 /********************************************************************/
68 /********************************************************************/
70 /* This define enables wrapper functions which allow you
71 to dump all register accesses. You normally won't this,
72 except for development */
73 /* #define DEBUG_IO */
76 static int debug_output
= 0;
78 /* This way the compiler optimizes the printk's away */
79 #define debug_output 0
82 static inline unsigned int if_cs_read8(struct if_cs_card
*card
, uint reg
)
84 unsigned int val
= ioread8(card
->iobase
+ reg
);
86 printk(KERN_INFO
"##inb %08x<%02x\n", reg
, val
);
89 static inline unsigned int if_cs_read16(struct if_cs_card
*card
, uint reg
)
91 unsigned int val
= ioread16(card
->iobase
+ reg
);
93 printk(KERN_INFO
"##inw %08x<%04x\n", reg
, val
);
96 static inline void if_cs_read16_rep(
97 struct if_cs_card
*card
,
103 printk(KERN_INFO
"##insw %08x<(0x%lx words)\n",
105 ioread16_rep(card
->iobase
+ reg
, buf
, count
);
108 static inline void if_cs_write8(struct if_cs_card
*card
, uint reg
, u8 val
)
111 printk(KERN_INFO
"##outb %08x>%02x\n", reg
, val
);
112 iowrite8(val
, card
->iobase
+ reg
);
115 static inline void if_cs_write16(struct if_cs_card
*card
, uint reg
, u16 val
)
118 printk(KERN_INFO
"##outw %08x>%04x\n", reg
, val
);
119 iowrite16(val
, card
->iobase
+ reg
);
122 static inline void if_cs_write16_rep(
123 struct if_cs_card
*card
,
129 printk(KERN_INFO
"##outsw %08x>(0x%lx words)\n",
131 iowrite16_rep(card
->iobase
+ reg
, buf
, count
);
136 * I know that polling/delaying is frowned upon. However, this procedure
137 * with polling is needed while downloading the firmware. At this stage,
138 * the hardware does unfortunately not create any interrupts.
140 * Fortunately, this function is never used once the firmware is in
143 * As a reference, see the "Firmware Specification v5.1", page 18
144 * and 19. I did not follow their suggested timing to the word,
145 * but this works nice & fast anyway.
147 static int if_cs_poll_while_fw_download(struct if_cs_card
*card
, uint addr
, u8 reg
)
151 for (i
= 0; i
< 1000; i
++) {
152 u8 val
= if_cs_read8(card
, addr
);
162 /* Host control registers and their bit definitions */
164 #define IF_CS_H_STATUS 0x00000000
165 #define IF_CS_H_STATUS_TX_OVER 0x0001
166 #define IF_CS_H_STATUS_RX_OVER 0x0002
167 #define IF_CS_H_STATUS_DNLD_OVER 0x0004
169 #define IF_CS_H_INT_CAUSE 0x00000002
170 #define IF_CS_H_IC_TX_OVER 0x0001
171 #define IF_CS_H_IC_RX_OVER 0x0002
172 #define IF_CS_H_IC_DNLD_OVER 0x0004
173 #define IF_CS_H_IC_POWER_DOWN 0x0008
174 #define IF_CS_H_IC_HOST_EVENT 0x0010
175 #define IF_CS_H_IC_MASK 0x001f
177 #define IF_CS_H_INT_MASK 0x00000004
178 #define IF_CS_H_IM_MASK 0x001f
180 #define IF_CS_H_WRITE_LEN 0x00000014
182 #define IF_CS_H_WRITE 0x00000016
184 #define IF_CS_H_CMD_LEN 0x00000018
186 #define IF_CS_H_CMD 0x0000001A
188 #define IF_CS_C_READ_LEN 0x00000024
190 #define IF_CS_H_READ 0x00000010
192 /* Card control registers and their bit definitions */
194 #define IF_CS_C_STATUS 0x00000020
195 #define IF_CS_C_S_TX_DNLD_RDY 0x0001
196 #define IF_CS_C_S_RX_UPLD_RDY 0x0002
197 #define IF_CS_C_S_CMD_DNLD_RDY 0x0004
198 #define IF_CS_C_S_CMD_UPLD_RDY 0x0008
199 #define IF_CS_C_S_CARDEVENT 0x0010
200 #define IF_CS_C_S_MASK 0x001f
201 #define IF_CS_C_S_STATUS_MASK 0x7f00
202 /* The following definitions should be the same as the MRVDRV_ ones */
204 #if MRVDRV_CMD_DNLD_RDY != IF_CS_C_S_CMD_DNLD_RDY
205 #error MRVDRV_CMD_DNLD_RDY and IF_CS_C_S_CMD_DNLD_RDY not in sync
207 #if MRVDRV_CMD_UPLD_RDY != IF_CS_C_S_CMD_UPLD_RDY
208 #error MRVDRV_CMD_UPLD_RDY and IF_CS_C_S_CMD_UPLD_RDY not in sync
210 #if MRVDRV_CARDEVENT != IF_CS_C_S_CARDEVENT
211 #error MRVDRV_CARDEVENT and IF_CS_C_S_CARDEVENT not in sync
214 #define IF_CS_C_INT_CAUSE 0x00000022
215 #define IF_CS_C_IC_MASK 0x001f
217 #define IF_CS_C_SQ_READ_LOW 0x00000028
218 #define IF_CS_C_SQ_HELPER_OK 0x10
220 #define IF_CS_C_CMD_LEN 0x00000030
222 #define IF_CS_C_CMD 0x00000012
224 #define IF_CS_SCRATCH 0x0000003F
228 /********************************************************************/
230 /********************************************************************/
232 static inline void if_cs_enable_ints(struct if_cs_card
*card
)
234 lbs_deb_enter(LBS_DEB_CS
);
235 if_cs_write16(card
, IF_CS_H_INT_MASK
, 0);
238 static inline void if_cs_disable_ints(struct if_cs_card
*card
)
240 lbs_deb_enter(LBS_DEB_CS
);
241 if_cs_write16(card
, IF_CS_H_INT_MASK
, IF_CS_H_IM_MASK
);
244 static irqreturn_t
if_cs_interrupt(int irq
, void *data
)
246 struct if_cs_card
*card
= data
;
249 lbs_deb_enter(LBS_DEB_CS
);
251 int_cause
= if_cs_read16(card
, IF_CS_C_INT_CAUSE
);
252 if(int_cause
== 0x0) {
256 } else if (int_cause
== 0xffff) {
257 /* Read in junk, the card has probably been removed */
258 card
->priv
->surpriseremoved
= 1;
261 if (int_cause
& IF_CS_H_IC_TX_OVER
)
262 lbs_host_to_card_done(card
->priv
);
264 /* clear interrupt */
265 if_cs_write16(card
, IF_CS_C_INT_CAUSE
, int_cause
& IF_CS_C_IC_MASK
);
267 spin_lock(&card
->priv
->driver_lock
);
268 lbs_interrupt(card
->priv
);
269 spin_unlock(&card
->priv
->driver_lock
);
277 /********************************************************************/
279 /********************************************************************/
282 * Called from if_cs_host_to_card to send a command to the hardware
284 static int if_cs_send_cmd(struct lbs_private
*priv
, u8
*buf
, u16 nb
)
286 struct if_cs_card
*card
= (struct if_cs_card
*)priv
->card
;
290 lbs_deb_enter(LBS_DEB_CS
);
292 /* Is hardware ready? */
294 u16 val
= if_cs_read16(card
, IF_CS_C_STATUS
);
295 if (val
& IF_CS_C_S_CMD_DNLD_RDY
)
298 lbs_pr_err("card not ready for commands\n");
304 if_cs_write16(card
, IF_CS_H_CMD_LEN
, nb
);
306 if_cs_write16_rep(card
, IF_CS_H_CMD
, buf
, nb
/ 2);
307 /* Are we supposed to transfer an odd amount of bytes? */
309 if_cs_write8(card
, IF_CS_H_CMD
, buf
[nb
-1]);
311 /* "Assert the download over interrupt command in the Host
312 * status register" */
313 if_cs_write16(card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_DNLD_OVER
);
315 /* "Assert the download over interrupt command in the Card
316 * interrupt case register" */
317 if_cs_write16(card
, IF_CS_H_INT_CAUSE
, IF_CS_H_IC_DNLD_OVER
);
321 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
327 * Called from if_cs_host_to_card to send a data to the hardware
329 static void if_cs_send_data(struct lbs_private
*priv
, u8
*buf
, u16 nb
)
331 struct if_cs_card
*card
= (struct if_cs_card
*)priv
->card
;
333 lbs_deb_enter(LBS_DEB_CS
);
335 if_cs_write16(card
, IF_CS_H_WRITE_LEN
, nb
);
337 /* write even number of bytes, then odd byte if necessary */
338 if_cs_write16_rep(card
, IF_CS_H_WRITE
, buf
, nb
/ 2);
340 if_cs_write8(card
, IF_CS_H_WRITE
, buf
[nb
-1]);
342 if_cs_write16(card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_TX_OVER
);
343 if_cs_write16(card
, IF_CS_H_INT_CAUSE
, IF_CS_H_STATUS_TX_OVER
);
345 lbs_deb_leave(LBS_DEB_CS
);
350 * Get the command result out of the card.
352 static int if_cs_receive_cmdres(struct lbs_private
*priv
, u8
*data
, u32
*len
)
357 lbs_deb_enter(LBS_DEB_CS
);
359 /* is hardware ready? */
360 val
= if_cs_read16(priv
->card
, IF_CS_C_STATUS
);
361 if ((val
& IF_CS_C_S_CMD_UPLD_RDY
) == 0) {
362 lbs_pr_err("card not ready for CMD\n");
366 *len
= if_cs_read16(priv
->card
, IF_CS_C_CMD_LEN
);
367 if ((*len
== 0) || (*len
> LBS_CMD_BUFFER_SIZE
)) {
368 lbs_pr_err("card cmd buffer has invalid # of bytes (%d)\n", *len
);
372 /* read even number of bytes, then odd byte if necessary */
373 if_cs_read16_rep(priv
->card
, IF_CS_C_CMD
, data
, *len
/sizeof(u16
));
375 data
[*len
-1] = if_cs_read8(priv
->card
, IF_CS_C_CMD
);
377 /* This is a workaround for a firmware that reports too much
382 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d, len %d", ret
, *len
);
387 static struct sk_buff
*if_cs_receive_data(struct lbs_private
*priv
)
389 struct sk_buff
*skb
= NULL
;
393 lbs_deb_enter(LBS_DEB_CS
);
395 len
= if_cs_read16(priv
->card
, IF_CS_C_READ_LEN
);
396 if (len
== 0 || len
> MRVDRV_ETH_RX_PACKET_BUFFER_SIZE
) {
397 lbs_pr_err("card data buffer has invalid # of bytes (%d)\n", len
);
398 priv
->stats
.rx_dropped
++;
399 printk(KERN_INFO
"##HS %s:%d TODO\n", __FUNCTION__
, __LINE__
);
403 //TODO: skb = dev_alloc_skb(len+ETH_FRAME_LEN+MRVDRV_SNAP_HEADER_LEN+EXTRA_LEN);
404 skb
= dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE
+ 2);
408 skb_reserve(skb
, 2);/* 16 byte align */
411 /* read even number of bytes, then odd byte if necessary */
412 if_cs_read16_rep(priv
->card
, IF_CS_H_READ
, data
, len
/sizeof(u16
));
414 data
[len
-1] = if_cs_read8(priv
->card
, IF_CS_H_READ
);
417 if_cs_write16(priv
->card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_RX_OVER
);
418 if_cs_write16(priv
->card
, IF_CS_H_INT_CAUSE
, IF_CS_H_IC_RX_OVER
);
421 lbs_deb_leave_args(LBS_DEB_CS
, "ret %p", skb
);
427 /********************************************************************/
429 /********************************************************************/
432 * Tries to program the helper firmware.
434 * Return 0 on success
436 static int if_cs_prog_helper(struct if_cs_card
*card
)
441 const struct firmware
*fw
;
443 lbs_deb_enter(LBS_DEB_CS
);
445 scratch
= if_cs_read8(card
, IF_CS_SCRATCH
);
447 /* "If the value is 0x5a, the firmware is already
448 * downloaded successfully"
453 /* "If the value is != 00, it is invalid value of register */
454 if (scratch
!= 0x00) {
459 /* TODO: make firmware file configurable */
460 ret
= request_firmware(&fw
, "libertas_cs_helper.fw",
461 &handle_to_dev(card
->p_dev
));
463 lbs_pr_err("can't load helper firmware\n");
467 lbs_deb_cs("helper size %td\n", fw
->size
);
469 /* "Set the 5 bytes of the helper image to 0" */
470 /* Not needed, this contains an ARM branch instruction */
473 /* "the number of bytes to send is 256" */
475 int remain
= fw
->size
- sent
;
479 /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n",
480 __LINE__, sent, fw->size); */
482 /* "write the number of bytes to be sent to the I/O Command
483 * write length register" */
484 if_cs_write16(card
, IF_CS_H_CMD_LEN
, count
);
486 /* "write this to I/O Command port register as 16 bit writes */
488 if_cs_write16_rep(card
, IF_CS_H_CMD
,
492 /* "Assert the download over interrupt command in the Host
493 * status register" */
494 if_cs_write8(card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_DNLD_OVER
);
496 /* "Assert the download over interrupt command in the Card
497 * interrupt case register" */
498 if_cs_write16(card
, IF_CS_H_INT_CAUSE
, IF_CS_H_IC_DNLD_OVER
);
500 /* "The host polls the Card Status register ... for 50 ms before
501 declaring a failure */
502 ret
= if_cs_poll_while_fw_download(card
, IF_CS_C_STATUS
,
503 IF_CS_C_S_CMD_DNLD_RDY
);
505 lbs_pr_err("can't download helper at 0x%x, ret %d\n",
516 release_firmware(fw
);
520 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
525 static int if_cs_prog_real(struct if_cs_card
*card
)
527 const struct firmware
*fw
;
533 lbs_deb_enter(LBS_DEB_CS
);
535 /* TODO: make firmware file configurable */
536 ret
= request_firmware(&fw
, "libertas_cs.fw",
537 &handle_to_dev(card
->p_dev
));
539 lbs_pr_err("can't load firmware\n");
543 lbs_deb_cs("fw size %td\n", fw
->size
);
545 ret
= if_cs_poll_while_fw_download(card
, IF_CS_C_SQ_READ_LOW
, IF_CS_C_SQ_HELPER_OK
);
548 lbs_pr_err("helper firmware doesn't answer\n");
549 for (i
= 0; i
< 0x50; i
+= 2)
550 printk(KERN_INFO
"## HS %02x: %04x\n",
551 i
, if_cs_read16(card
, i
));
555 for (sent
= 0; sent
< fw
->size
; sent
+= len
) {
556 len
= if_cs_read16(card
, IF_CS_C_SQ_READ_LOW
);
557 /* printk(KERN_INFO "//HS %d loading %d of %d bytes\n",
558 __LINE__, sent, fw->size); */
561 lbs_pr_info("odd, need to retry this firmware block\n");
567 lbs_pr_err("could not download firmware\n");
576 if_cs_write16(card
, IF_CS_H_CMD_LEN
, len
);
578 if_cs_write16_rep(card
, IF_CS_H_CMD
,
581 if_cs_write8(card
, IF_CS_H_STATUS
, IF_CS_H_STATUS_DNLD_OVER
);
582 if_cs_write16(card
, IF_CS_H_INT_CAUSE
, IF_CS_H_IC_DNLD_OVER
);
584 ret
= if_cs_poll_while_fw_download(card
, IF_CS_C_STATUS
,
585 IF_CS_C_S_CMD_DNLD_RDY
);
587 lbs_pr_err("can't download firmware at 0x%x\n", sent
);
592 ret
= if_cs_poll_while_fw_download(card
, IF_CS_SCRATCH
, 0x5a);
594 lbs_pr_err("firmware download failed\n");
603 release_firmware(fw
);
606 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
612 /********************************************************************/
613 /* Callback functions for libertas.ko */
614 /********************************************************************/
616 /* Send commands or data packets to the card */
617 static int if_cs_host_to_card(struct lbs_private
*priv
,
624 lbs_deb_enter_args(LBS_DEB_CS
, "type %d, bytes %d", type
, nb
);
628 priv
->dnld_sent
= DNLD_DATA_SENT
;
629 if_cs_send_data(priv
, buf
, nb
);
633 priv
->dnld_sent
= DNLD_CMD_SENT
;
634 ret
= if_cs_send_cmd(priv
, buf
, nb
);
637 lbs_pr_err("%s: unsupported type %d\n", __FUNCTION__
, type
);
640 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
645 static int if_cs_get_int_status(struct lbs_private
*priv
, u8
*ireg
)
647 struct if_cs_card
*card
= (struct if_cs_card
*)priv
->card
;
653 lbs_deb_enter(LBS_DEB_CS
);
655 if (priv
->surpriseremoved
)
658 int_cause
= if_cs_read16(card
, IF_CS_C_INT_CAUSE
) & IF_CS_C_IC_MASK
;
659 if_cs_write16(card
, IF_CS_C_INT_CAUSE
, int_cause
);
661 *ireg
= if_cs_read16(card
, IF_CS_C_STATUS
) & IF_CS_C_S_MASK
;
664 goto sbi_get_int_status_exit
;
666 sbi_get_int_status_exit
:
668 /* is there a data packet for us? */
669 if (*ireg
& IF_CS_C_S_RX_UPLD_RDY
) {
670 struct sk_buff
*skb
= if_cs_receive_data(priv
);
671 lbs_process_rxed_packet(priv
, skb
);
672 *ireg
&= ~IF_CS_C_S_RX_UPLD_RDY
;
675 if (*ireg
& IF_CS_C_S_TX_DNLD_RDY
) {
676 priv
->dnld_sent
= DNLD_RES_RECEIVED
;
679 /* Card has a command result for us */
680 if (*ireg
& IF_CS_C_S_CMD_UPLD_RDY
) {
681 spin_lock(&priv
->driver_lock
);
682 if (!priv
->cur_cmd
) {
683 cmdbuf
= priv
->upld_buf
;
684 priv
->hisregcpy
&= ~IF_CS_C_S_RX_UPLD_RDY
;
686 cmdbuf
= (u8
*) priv
->cur_cmd
->cmdbuf
;
689 ret
= if_cs_receive_cmdres(priv
, cmdbuf
, &priv
->upld_len
);
690 spin_unlock(&priv
->driver_lock
);
692 lbs_pr_err("could not receive cmd from card\n");
696 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d, ireg 0x%x, hisregcpy 0x%x", ret
, *ireg
, priv
->hisregcpy
);
701 static int if_cs_read_event_cause(struct lbs_private
*priv
)
703 lbs_deb_enter(LBS_DEB_CS
);
705 priv
->eventcause
= (if_cs_read16(priv
->card
, IF_CS_C_STATUS
) & IF_CS_C_S_STATUS_MASK
) >> 5;
706 if_cs_write16(priv
->card
, IF_CS_H_INT_CAUSE
, IF_CS_H_IC_HOST_EVENT
);
713 /********************************************************************/
715 /********************************************************************/
718 * After a card is removed, if_cs_release() will unregister the
719 * device, and release the PCMCIA configuration. If the device is
720 * still open, this will be postponed until it is closed.
722 static void if_cs_release(struct pcmcia_device
*p_dev
)
724 struct if_cs_card
*card
= p_dev
->priv
;
726 lbs_deb_enter(LBS_DEB_CS
);
728 pcmcia_disable_device(p_dev
);
729 free_irq(p_dev
->irq
.AssignedIRQ
, card
);
731 ioport_unmap(card
->iobase
);
733 lbs_deb_leave(LBS_DEB_CS
);
738 * This creates an "instance" of the driver, allocating local data
739 * structures for one device. The device is registered with Card
742 * The dev_link structure is initialized, but we don't actually
743 * configure the card at this point -- we wait until we receive a card
746 static int if_cs_probe(struct pcmcia_device
*p_dev
)
749 struct lbs_private
*priv
;
750 struct if_cs_card
*card
;
754 cistpl_cftable_entry_t
*cfg
= &parse
.cftable_entry
;
755 cistpl_io_t
*io
= &cfg
->io
;
758 lbs_deb_enter(LBS_DEB_CS
);
760 card
= kzalloc(sizeof(struct if_cs_card
), GFP_KERNEL
);
762 lbs_pr_err("error in kzalloc\n");
768 p_dev
->irq
.Attributes
= IRQ_TYPE_DYNAMIC_SHARING
;
769 p_dev
->irq
.Handler
= NULL
;
770 p_dev
->irq
.IRQInfo1
= IRQ_INFO2_VALID
| IRQ_LEVEL_ID
;
772 p_dev
->conf
.Attributes
= 0;
773 p_dev
->conf
.IntType
= INT_MEMORY_AND_IO
;
775 tuple
.Attributes
= 0;
776 tuple
.TupleData
= buf
;
777 tuple
.TupleDataMax
= sizeof(buf
);
778 tuple
.TupleOffset
= 0;
780 tuple
.DesiredTuple
= CISTPL_CFTABLE_ENTRY
;
781 if ((ret
= pcmcia_get_first_tuple(p_dev
, &tuple
)) != 0 ||
782 (ret
= pcmcia_get_tuple_data(p_dev
, &tuple
)) != 0 ||
783 (ret
= pcmcia_parse_tuple(p_dev
, &tuple
, &parse
)) != 0)
785 lbs_pr_err("error in pcmcia_get_first_tuple etc\n");
789 p_dev
->conf
.ConfigIndex
= cfg
->index
;
791 /* Do we need to allocate an interrupt? */
792 if (cfg
->irq
.IRQInfo1
) {
793 p_dev
->conf
.Attributes
|= CONF_ENABLE_IRQ
;
796 /* IO window settings */
797 if (cfg
->io
.nwin
!= 1) {
798 lbs_pr_err("wrong CIS (check number of IO windows)\n");
802 p_dev
->io
.Attributes1
= IO_DATA_PATH_WIDTH_AUTO
;
803 p_dev
->io
.BasePort1
= io
->win
[0].base
;
804 p_dev
->io
.NumPorts1
= io
->win
[0].len
;
806 /* This reserves IO space but doesn't actually enable it */
807 ret
= pcmcia_request_io(p_dev
, &p_dev
->io
);
809 lbs_pr_err("error in pcmcia_request_io\n");
814 * Allocate an interrupt line. Note that this does not assign
815 * a handler to the interrupt, unless the 'Handler' member of
816 * the irq structure is initialized.
818 if (p_dev
->conf
.Attributes
& CONF_ENABLE_IRQ
) {
819 ret
= pcmcia_request_irq(p_dev
, &p_dev
->irq
);
821 lbs_pr_err("error in pcmcia_request_irq\n");
826 /* Initialize io access */
827 card
->iobase
= ioport_map(p_dev
->io
.BasePort1
, p_dev
->io
.NumPorts1
);
829 lbs_pr_err("error in ioport_map\n");
835 * This actually configures the PCMCIA socket -- setting up
836 * the I/O windows and the interrupt mapping, and putting the
837 * card and host interface into "Memory and IO" mode.
839 ret
= pcmcia_request_configuration(p_dev
, &p_dev
->conf
);
841 lbs_pr_err("error in pcmcia_request_configuration\n");
845 /* Finally, report what we've done */
846 lbs_deb_cs("irq %d, io 0x%04x-0x%04x\n",
847 p_dev
->irq
.AssignedIRQ
, p_dev
->io
.BasePort1
,
848 p_dev
->io
.BasePort1
+ p_dev
->io
.NumPorts1
- 1);
851 /* Load the firmware early, before calling into libertas.ko */
852 ret
= if_cs_prog_helper(card
);
854 ret
= if_cs_prog_real(card
);
858 /* Make this card known to the libertas driver */
859 priv
= lbs_add_card(card
, &p_dev
->dev
);
865 /* Store pointers to our call-back functions */
868 priv
->hw_host_to_card
= if_cs_host_to_card
;
869 priv
->hw_get_int_status
= if_cs_get_int_status
;
870 priv
->hw_read_event_cause
= if_cs_read_event_cause
;
874 /* Now actually get the IRQ */
875 ret
= request_irq(p_dev
->irq
.AssignedIRQ
, if_cs_interrupt
,
876 IRQF_SHARED
, DRV_NAME
, card
);
878 lbs_pr_err("error in request_irq\n");
882 /* Clear any interrupt cause that happend while sending
883 * firmware/initializing card */
884 if_cs_write16(card
, IF_CS_C_INT_CAUSE
, IF_CS_C_IC_MASK
);
885 if_cs_enable_ints(card
);
887 /* And finally bring the card up */
888 if (lbs_start_card(priv
) != 0) {
889 lbs_pr_err("could not activate card\n");
897 lbs_remove_card(priv
);
899 ioport_unmap(card
->iobase
);
901 pcmcia_disable_device(p_dev
);
903 lbs_deb_leave_args(LBS_DEB_CS
, "ret %d", ret
);
909 * This deletes a driver "instance". The device is de-registered with
910 * Card Services. If it has been released, all local data structures
911 * are freed. Otherwise, the structures will be freed when the device
914 static void if_cs_detach(struct pcmcia_device
*p_dev
)
916 struct if_cs_card
*card
= p_dev
->priv
;
918 lbs_deb_enter(LBS_DEB_CS
);
920 lbs_stop_card(card
->priv
);
921 lbs_remove_card(card
->priv
);
922 if_cs_disable_ints(card
);
923 if_cs_release(p_dev
);
926 lbs_deb_leave(LBS_DEB_CS
);
931 /********************************************************************/
932 /* Module initialization */
933 /********************************************************************/
935 static struct pcmcia_device_id if_cs_ids
[] = {
936 PCMCIA_DEVICE_MANF_CARD(0x02df, 0x8103),
939 MODULE_DEVICE_TABLE(pcmcia
, if_cs_ids
);
942 static struct pcmcia_driver lbs_driver
= {
943 .owner
= THIS_MODULE
,
947 .probe
= if_cs_probe
,
948 .remove
= if_cs_detach
,
949 .id_table
= if_cs_ids
,
953 static int __init
if_cs_init(void)
957 lbs_deb_enter(LBS_DEB_CS
);
958 ret
= pcmcia_register_driver(&lbs_driver
);
959 lbs_deb_leave(LBS_DEB_CS
);
964 static void __exit
if_cs_exit(void)
966 lbs_deb_enter(LBS_DEB_CS
);
967 pcmcia_unregister_driver(&lbs_driver
);
968 lbs_deb_leave(LBS_DEB_CS
);
972 module_init(if_cs_init
);
973 module_exit(if_cs_exit
);