[s3c24xx] Add 2.6.31 patches
[openwrt.git] / target / linux / s3c24xx / files-2.6.31 / drivers / ar6000 / include / ieee80211_ioctl.h
1 /*
2 * Copyright (c) 2004-2005 Atheros Communications Inc.
3 * All rights reserved.
4 *
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation;
9 *
10 * Software distributed under the License is distributed on an "AS
11 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
12 * implied. See the License for the specific language governing
13 * rights and limitations under the License.
14 *
15 *
16 *
17 *
18 * $Id: //depot/sw/releases/olca2.0-GPL/host/os/linux/include/ieee80211_ioctl.h#1 $
19 */
20
21 #ifndef _IEEE80211_IOCTL_H_
22 #define _IEEE80211_IOCTL_H_
23
24 #ifdef __cplusplus
25 extern "C" {
26 #endif
27
28 /*
29 * Extracted from the MADWIFI net80211/ieee80211_ioctl.h
30 */
31
32 /*
33 * WPA/RSN get/set key request. Specify the key/cipher
34 * type and whether the key is to be used for sending and/or
35 * receiving. The key index should be set only when working
36 * with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
37 * Otherwise a unicast/pairwise key is specified by the bssid
38 * (on a station) or mac address (on an ap). They key length
39 * must include any MIC key data; otherwise it should be no
40 more than IEEE80211_KEYBUF_SIZE.
41 */
42 struct ieee80211req_key {
43 u_int8_t ik_type; /* key/cipher type */
44 u_int8_t ik_pad;
45 u_int16_t ik_keyix; /* key index */
46 u_int8_t ik_keylen; /* key length in bytes */
47 u_int8_t ik_flags;
48 #define IEEE80211_KEY_XMIT 0x01
49 #define IEEE80211_KEY_RECV 0x02
50 #define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */
51 u_int8_t ik_macaddr[IEEE80211_ADDR_LEN];
52 u_int64_t ik_keyrsc; /* key receive sequence counter */
53 u_int64_t ik_keytsc; /* key transmit sequence counter */
54 u_int8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
55 };
56 /*
57 * Delete a key either by index or address. Set the index
58 * to IEEE80211_KEYIX_NONE when deleting a unicast key.
59 */
60 struct ieee80211req_del_key {
61 u_int8_t idk_keyix; /* key index */
62 u_int8_t idk_macaddr[IEEE80211_ADDR_LEN];
63 };
64 /*
65 * MLME state manipulation request. IEEE80211_MLME_ASSOC
66 * only makes sense when operating as a station. The other
67 * requests can be used when operating as a station or an
68 * ap (to effect a station).
69 */
70 struct ieee80211req_mlme {
71 u_int8_t im_op; /* operation to perform */
72 #define IEEE80211_MLME_ASSOC 1 /* associate station */
73 #define IEEE80211_MLME_DISASSOC 2 /* disassociate station */
74 #define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */
75 #define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */
76 #define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */
77 u_int16_t im_reason; /* 802.11 reason code */
78 u_int8_t im_macaddr[IEEE80211_ADDR_LEN];
79 };
80
81 struct ieee80211req_addpmkid {
82 u_int8_t pi_bssid[IEEE80211_ADDR_LEN];
83 u_int8_t pi_enable;
84 u_int8_t pi_pmkid[16];
85 };
86
87 #define AUTH_ALG_OPEN_SYSTEM 0x01
88 #define AUTH_ALG_SHARED_KEY 0x02
89 #define AUTH_ALG_LEAP 0x04
90
91 struct ieee80211req_authalg {
92 u_int8_t auth_alg;
93 };
94
95 /*
96 * Request to add an IE to a Management Frame
97 */
98 enum{
99 IEEE80211_APPIE_FRAME_BEACON = 0,
100 IEEE80211_APPIE_FRAME_PROBE_REQ = 1,
101 IEEE80211_APPIE_FRAME_PROBE_RESP = 2,
102 IEEE80211_APPIE_FRAME_ASSOC_REQ = 3,
103 IEEE80211_APPIE_FRAME_ASSOC_RESP = 4,
104 IEEE80211_APPIE_NUM_OF_FRAME = 5
105 };
106
107 /*
108 * The Maximum length of the IE that can be added to a Management frame
109 */
110 #define IEEE80211_APPIE_FRAME_MAX_LEN 78
111
112 struct ieee80211req_getset_appiebuf {
113 u_int32_t app_frmtype; /* management frame type for which buffer is added */
114 u_int32_t app_buflen; /*application supplied buffer length */
115 u_int8_t app_buf[];
116 };
117
118 /*
119 * The following definitions are used by an application to set filter
120 * for receiving management frames
121 */
122 enum {
123 IEEE80211_FILTER_TYPE_BEACON = 0x1,
124 IEEE80211_FILTER_TYPE_PROBE_REQ = 0x2,
125 IEEE80211_FILTER_TYPE_PROBE_RESP = 0x4,
126 IEEE80211_FILTER_TYPE_ASSOC_REQ = 0x8,
127 IEEE80211_FILTER_TYPE_ASSOC_RESP = 0x10,
128 IEEE80211_FILTER_TYPE_AUTH = 0x20,
129 IEEE80211_FILTER_TYPE_DEAUTH = 0x40,
130 IEEE80211_FILTER_TYPE_DISASSOC = 0x80,
131 IEEE80211_FILTER_TYPE_ALL = 0xFF /* used to check the valid filter bits */
132 };
133
134 struct ieee80211req_set_filter {
135 u_int32_t app_filterype; /* management frame filter type */
136 };
137
138 enum {
139 IEEE80211_PARAM_AUTHMODE = 3, /* Authentication Mode */
140 IEEE80211_PARAM_MCASTCIPHER = 5,
141 IEEE80211_PARAM_MCASTKEYLEN = 6, /* multicast key length */
142 IEEE80211_PARAM_UCASTCIPHER = 8,
143 IEEE80211_PARAM_UCASTKEYLEN = 9, /* unicast key length */
144 IEEE80211_PARAM_WPA = 10, /* WPA mode (0,1,2) */
145 IEEE80211_PARAM_ROAMING = 12, /* roaming mode */
146 IEEE80211_PARAM_PRIVACY = 13, /* privacy invoked */
147 IEEE80211_PARAM_COUNTERMEASURES = 14, /* WPA/TKIP countermeasures */
148 IEEE80211_PARAM_DROPUNENCRYPTED = 15, /* discard unencrypted frames */
149 };
150
151 /*
152 * Values for IEEE80211_PARAM_WPA
153 */
154 #define WPA_MODE_WPA1 1
155 #define WPA_MODE_WPA2 2
156 #define WPA_MODE_AUTO 3
157 #define WPA_MODE_NONE 4
158
159 #ifdef __cplusplus
160 }
161 #endif
162
163 #endif /* _IEEE80211_IOCTL_H_ */
This page took 0.048236 seconds and 5 git commands to generate.