port more modules over to the new system

[openwrt.git] / target / linux / Config.in

diff --git a/target/linux/Config.in b/target/linux/Config.in
index bcb8179..a6153ce 100644 (file)
--- a/target/linux/Config.in
+++ b/target/linux/Config.in
@@ -1,259 +1,177 @@
+menu "Kernel Configuration / Device Support"

 
 

-config BR2_LINUX_2_4
-       bool "Linux 2.4"
-       default y
+comment "Kernel modules"

 
 

-config BR2_LINUX_2_4_BRCM
-       bool "Support for Broadcom based routers"
-       default y
-       help
-         Build firmware images for Broadcom based routers
-         (e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G)
-         
-         This one builds the generic .trx images, activate one of the
-         options below for creating device specific files for use 
-         with TFTP client too. 
-
-       config BR2_TARGET_WRT54G
-               default y
-               depends BR2_LINUX_2_4_BRCM
-               bool "Linksys WRT54G"
-
-       config BR2_TARGET_WRT54GS
-               default y
-               depends BR2_LINUX_2_4_BRCM
-               bool "Linksys WRT54GS"
-       
-       config BR2_TARGET_MOTOROLA
-               default y
-               depends BR2_LINUX_2_4_BRCM
-               bool "Motorola WR850G"
-
-config BR2_LINUX_2_4_AR7
-       bool "Support for TI AR7 based devices"
-       default n
-       help
-         Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2)
-
-comment "Kernel Modules"
+menu "Multimedia devices support"

 
 

-config BR2_PACKAGE_KMOD_DIAG
-       tristate "Router LED/Button Driver"
-       default y
-       help
-         Driver for the LEDs on Wireless Routers (diag)
-
-config BR2_PACKAGE_KMOD_BRCM_WL
-       tristate "Broadcom Wireless Network Driver"
-       depends BR2_LINUX_2_4_BRCM
-       default y
-       help
-         Proprietary driver for Broadcom Wireless chipsets
-
-config BR2_PACKAGE_KMOD_BRCM_ET
-       tristate "Broadcom Ethernet Driver"
-       depends BR2_LINUX_2_4_BRCM
-       default y
-       help
-         Proprietary driver for Broadcom Ethernet chipsets
-
-config BR2_PACKAGE_KMOD_B44
-       tristate "Broadcom 44XX, 47XX ethernet driver"
+config PACKAGE_KMOD_PWC
+       prompt "kmod-pwc.......................... Kernel driver for USB Philips Cameras"
+       tristate
+       depends PACKAGE_kmod-usb-core

        default m
        default m

-       help
-         Free driver for Broadcom Ethernet chipsets (without switch support)

 
 

-config BR2_PACKAGE_KMOD_ARPT
-       tristate "ARP firewalling support"
+config PACKAGE_KMOD_VIDEODEV
+       prompt "kmod-videodev..................... Video (For Linux) kernel support"
+       tristate

        default m
        default m

-       help
-         Kernel modules for ARP firewalling

 
 

-config BR2_PACKAGE_KMOD_EBT
-       tristate "Ethernet Bridge firewalling support"
-       default m
-       help
-         Kernel modules for bridge firewalling
+endmenu

 
 

-config BR2_PACKAGE_KMOD_IPTABLES_V4
-       tristate "Basic set of kernel modules for iptables"
-       default y
-       help
-         Kernel modules for IPv4 firewalling

 
 

-config BR2_PACKAGE_KMOD_IPTABLES_V4_EXTRA
-       tristate "Extra modules for iptables"
-       default m
-       help
-         Extra kernel modules for IPv4 firewalling
+menu "Network devices support"
+       depends LINUX_2_4_X86 || LINUX_2_6_X86

 
 

-config BR2_PACKAGE_KMOD_IPV6
-       tristate "IPv6 support"
+config PACKAGE_KMOD_NET_AIRO
+       prompt "kmod-net-airo..................... Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support"
+       tristate
+       depends LINUX_2_4_X86 || LINUX_2_6_X86

        default m
        help
        default m
        help

-         Kernel modules for IPv6 protocol support
+         This is the standard Linux driver to support Cisco/Aironet ISA and 
+         PCI 802.11 wireless cards.
+         It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 
+         - with or without encryption) as well as card before the Cisco 
+         acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).

          
          

-config BR2_PACKAGE_KMOD_IPTABLES_V6
-       tristate "Kernel modules for ip6tables"
-       default m
-       depends BR2_PACKAGE_KMOD_IPV6
-       help
-         IPv6 firewalling support
+         This driver support both the standard Linux Wireless Extensions 
+         and Cisco proprietary API, so both the Linux Wireless Tools and the 
+         Cisco Linux utilities can be used to configure the card.

 
 

-config BR2_PACKAGE_KMOD_NFS
-       tristate "NFS support"
-       default m
-       help
-         Kernel modules for NFS support
-         Includes lockd, nfs and sunrpc

 
 

-config BR2_PACKAGE_KMOD_CIFS
-       tristate "CIFS support"
+config PACKAGE_KMOD_NET_HERMES
+       prompt "kmod-net-hermes................... Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support"
+       tristate
+       depends LINUX_2_4_X86 || LINUX_2_6_X86

        default m
        help
        default m
        help

-         Kernel modules for CIFS support
+         A driver for 802.11b wireless cards based based on the "Hermes" or 
+         Intersil HFA384x (Prism 2) MAC controller.  This includes the vast 
+         majority of the PCMCIA 802.11b cards (which are nearly all rebadges) 
+         - except for the Cisco/Aironet cards.  Cards supported include the 
+         Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, 
+         Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, 
+         IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear 
+         MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel 
+         PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.

 
 

-config BR2_PACKAGE_KMOD_USB
-       tristate "USB support"
-       default m
-
-config BR2_PACKAGE_KMOD_USB_CONTROLLER
+config PACKAGE_KMOD_NET_HERMES_PCI
+       prompt   "kmod-net-hermes-pci............. Intersil Prism 2.5 PCI 802.11b adaptor support"

        tristate
        tristate

-       depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI
-       default n
-
-config BR2_PACKAGE_KMOD_USB_UHCI
-       tristate "Support for UHCI controllers"
-       default m
-       depends BR2_PACKAGE_KMOD_USB
-       select BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_OHCI
-       tristate "Support for OHCI controllers"
-       default m
-       depends BR2_PACKAGE_KMOD_USB
-       select BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB2
-       tristate "Support for USB 2.0 controllers"
-       default m
-       depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_STORAGE
-       tristate "Support for USB storage devices"
-       default m
-       depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_PRINTER
-       tristate "Support for USB printers"
-       default m
-       depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_USB_ACM
-       tristate "Support for USB modems/isdn controllers"
-       default m
-       depends BR2_PACKAGE_KMOD_USB_CONTROLLER
-
-config BR2_PACKAGE_KMOD_IDE
-       tristate "IDE support"

        default m
        default m

+       depends PACKAGE_KMOD_NET_HERMES

        help
        help

-         Kernel modules for IDE support
-         useful for usb mass storage devices (e.g. on WL-HDD)
+         Enable support for PCI and mini-PCI 802.11b wireless NICs based on 
+         the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b 
+         PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also 
+         common.  Some of the built-in wireless adaptors in laptops are of 
+         this variety.

 
 

-config BR2_PACKAGE_KMOD_VFAT
-       tristate "VFAT filesystem support"
+config PACKAGE_KMOD_NET_HERMES_PLX
+       prompt   "kmod-net-hermes-plx............. Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support"
+       tristate

        default m
        default m

+       depends PACKAGE_KMOD_NET_HERMES

        help
        help

-         Kernel modules for VFAT filesystem support
-         useful for usb mass storage devices
+         Enable support for PCMCIA cards supported by the "Hermes" (aka 
+         orinoco_cs) driver when used in PLX9052 based PCI adaptors.  These 
+         adaptors are not a full PCMCIA controller but act as a more limited 
+         PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that 
+         802.11b PCMCIA cards can be used in desktop machines.  The Netgear 
+         MA301 is such an adaptor.

 
 

-config BR2_PACKAGE_KMOD_EXT2
-       tristate "EXT2 filesystem support"
-       default m
-       help
-         Kernel modules for EXT2 filesystem support

 
 

-config BR2_PACKAGE_KMOD_EXT3
-       tristate "EXT3 filesystem support"
-       default m
-       help
-         Kernel modules for EXT3 filesystem support

 
 

-config BR2_PACKAGE_KMOD_XFS
-       tristate "XFS filesystem support"
+config PACKAGE_KMOD_NET_PRISM54
+       prompt "kmod-net-prism54.................. Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support"
+       tristate
+       depends LINUX_2_4_X86 || LINUX_2_6_X86 || LINUX_2_4_BRCM || LINUX_2_6_BRCM

        default m
        help
        default m
        help

-         Kernel modules for XFS filesystem support
+         Enable PCI and Cardbus support for the following chipset based cards: 
+         
+          * ISL3880 - Prism GT       802.11 b/g
+          * ISL3877 - Prism Indigo   802.11 a
+          * ISL3890 - Prism Duette   802.11 a/b/g
+         
+         For a complete list of supported cards visit <http://prism54.org>.
+         Here is the latest confirmed list of supported cards: 
+         
+          * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+          * Allnet ALL0271 PCI Card
+          * Compex WL54G Cardbus Card
+          * Corega CG-WLCB54GT Cardbus Card
+          * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+          * I-O Data WN-G54/CB Cardbus Card
+          * Kobishi XG-300 aka Z-Com Cardbus Card
+          * Netgear WG511 Cardbus Card
+          * Ovislink WL-5400PCI PCI Card
+          * Peabird WLG-PCI PCI Card
+          * Sitecom WL-100i Cardbus Card
+          * Sitecom WL-110i PCI Card
+          * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+          * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+          * Z-Com XG-900 PCI Card
+          * Zyxel G-100 Cardbus Card
+         
+         If you enable this, you require a firmware file as well.
+         You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+         You can get this non-GPL'd firmware file from the Prism54 project page: 
+         <http://prism54.org>.
+         
+         Note: You need a motherboard with DMA support to use any of these cards.

 
 

-config BR2_PACKAGE_KMOD_HFSPLUS
-       tristate "HFS+ filesystem support"
-       default m
-       help
-         Kernel modules for HFS+ filesystem support
+endmenu

 
 

-config BR2_PACKAGE_KMOD_LOOP
-       tristate "loop mount support"
-       default m
-       help
-         Kernel module for loop mount support
+menu "PCMCIA/CardBus support"
+       depends PCMCIA_SUPPORT

 
 

-config BR2_PACKAGE_KMOD_NBD
-       tristate "network block device"
+config PACKAGE_KMOD_PCMCIA_CORE
+       prompt "kmod-pcmcia-core.................. PCMCIA/CardBus support"
+       tristate

        default m
        default m

-       help
-         Kernel module for network block device

 
 

-config BR2_PACKAGE_KMOD_LP
-       tristate "parallel port and lp support"
+config PACKAGE_KMOD_PCMCIA_SERIAL
+       prompt   "kmod-pcmcia-serial.............. PCMCIA/CardBus serial device support"
+       tristate

        default m
        default m

-       help
-         Kernel modules for line printer and parallel port support
+       depends PACKAGE_KMOD_PCMCIA_CORE

 
 

-config BR2_PACKAGE_KMOD_CRYPTO
-       tristate "CryptoAPI modules"
-       default m
-       select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
-       help
-         Kernel modules for cryptographic algorithms
+endmenu

 
 

-config BR2_PACKAGE_KMOD_PPP
-       tristate "PPP support"
-       default m
-       help
-         Kernel support for PPP

 
 

-config BR2_PACKAGE_KMOD_MPPE
-       tristate "PPP MPPE/MPPC module"
-       default m
-       select BR2_PACKAGE_KMOD_CRYPTO
-       depends BR2_PACKAGE_KMOD_PPP
-       help
-         Support for Microsoft PPP Encryption/Compression
+menu "Misc. devices support"

 
 

-config BR2_PACKAGE_KMOD_PPPOE
-       tristate "PPPoE modules"
+config PACKAGE_KMOD_AX25
+       prompt "kmod-ax25......................... AX25 support"
+       tristate

        default m
        default m

-       depends BR2_PACKAGE_KMOD_PPP

        help
        help

-         Support for PPP over Ethernet
+         Kernel modules for AX25 protocol family
+         
+         This package contains both the AX25 layer 2 support (ax25) and AX25 KISS driver (mkiss)

 
 

-config BR2_PACKAGE_KMOD_TUN
-       tristate "Universal TUN/TAP driver"
+config PACKAGE_KMOD_BLUETOOTH
+       prompt "kmod-bluetooth.................... Bluetooth drivers and network stack"
+       tristate
+       depends PCI_SUPPORT || USB_SUPPORT

        default m
        help
        default m
        help

-         Kernel support for the TUN/TAP tunneling device
+         Bluetooth drivers and network stack

 
 

-config BR2_PACKAGE_KMOD_GRE
-       tristate "GRE tunneling driver"
+config PACKAGE_KMOD_LP
+       prompt "kmod-lp........................... Parallel port and lp support"
+       tristate

        default m
        help
        default m
        help

-         Kernel support for GRE tunnels
+         Kernel modules for line printer and parallel port support

 
 

-config BR2_PACKAGE_KMOD_SCHED
-       tristate "Traffic schedulers"
+config PACKAGE_KMOD_SOFTDOG
+       prompt "kmod-softdog...................... Software watchdog"
+       tristate

        default m
        help
        default m
        help

-         Kernel schedulers for IP traffic
+         Kernel modules for software watchdog driver
+
+endmenu

 
 

-source "target/linux/package/Config.in"
+endmenu