PKG_NAME:=mac80211
-PKG_VERSION:=2011-02-07
+PKG_VERSION:=2011-02-25
PKG_RELEASE:=1
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
-PKG_MD5SUM:=a194610426c81ed5ad71ee83330c9669
+PKG_MD5SUM:=c0242cc152a157902ff60fe05d1773b2
PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
--- a/config.mk
+++ b/config.mk
-@@ -311,8 +311,8 @@ endif #CONFIG_SSB
+@@ -316,8 +316,8 @@ endif #CONFIG_SSB
CONFIG_P54_PCI=m
ifeq ($(CONFIG_MAC80211),y)
$(error "ERROR: you have MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If you are using Fedora upgrade your kernel as later version should this set as modular. For further information on Fedora see https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using your own kernel recompile it and make mac80211 modular")
-@@ -613,10 +613,10 @@ endif #CONFIG_COMPAT_KERNEL_27
+@@ -623,10 +623,10 @@ endif #CONFIG_COMPAT_KERNEL_27
# We need the backported rfkill module on kernel < 2.6.31.
# In more recent kernel versions use the in kernel rfkill module.
ifdef CONFIG_COMPAT_KERNEL_31
else
include $(KLIB_BUILD)/.config
endif
-@@ -295,19 +294,18 @@ CONFIG_IPW2200_QOS=y
+@@ -300,19 +299,18 @@ CONFIG_IPW2200_QOS=y
# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
endif #CONFIG_WIRELESS_EXT
CONFIG_P54_PCI=m
-@@ -505,7 +503,6 @@ endif #CONFIG_SPI_MASTER end of SPI driv
+@@ -514,7 +512,6 @@ endif #CONFIG_SPI_MASTER end of SPI driv
ifdef CONFIG_MMC
--- a/config.mk
+++ b/config.mk
-@@ -202,7 +202,7 @@ $(warning "WARNING: CONFIG_CFG80211_WEXT
+@@ -204,7 +204,7 @@ $(warning "WARNING: CONFIG_CFG80211_WEXT
endif #CONFIG_WIRELESS_EXT
ifneq ($(CONFIG_STAGING),)
endif
# mac80211 test driver
-@@ -336,13 +336,13 @@ endif #CONFIG_CRC_ITU_T
+@@ -342,13 +342,13 @@ endif #CONFIG_CRC_ITU_T
CONFIG_MWL8K=m
# Ethernet drivers go here
endif #CONFIG_COMPAT_KERNEL_27
ifdef CONFIG_WIRELESS_EXT
-@@ -396,21 +396,21 @@ CONFIG_ZD1211RW=m
+@@ -403,21 +403,21 @@ endif #CONFIG_COMPAT_KERNEL_29
# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
ifdef CONFIG_COMPAT_KERNEL_29
else
include $(KLIB_BUILD)/.config
endif
-@@ -229,7 +229,7 @@ CONFIG_B43=m
+@@ -234,7 +234,7 @@ CONFIG_B43=m
CONFIG_B43_HWRNG=y
CONFIG_B43_PCI_AUTOSELECT=y
ifdef CONFIG_PCMCIA
--- a/config.mk
+++ b/config.mk
-@@ -486,7 +486,7 @@ endif #CONFIG_SPI_MASTER end of SPI driv
+@@ -495,7 +495,7 @@ endif #CONFIG_SPI_MASTER end of SPI driv
ifdef CONFIG_MMC
--- a/config.mk
+++ b/config.mk
-@@ -235,7 +235,7 @@ ifdef CONFIG_MAC80211_LEDS
+@@ -240,7 +240,7 @@ ifdef CONFIG_MAC80211_LEDS
CONFIG_B43_LEDS=y
endif #CONFIG_MAC80211_LEDS
CONFIG_B43_PHY_LP=y
--- a/config.mk
+++ b/config.mk
-@@ -299,7 +299,7 @@ CONFIG_RTL8180=m
+@@ -304,7 +304,7 @@ CONFIG_RTL8180=m
CONFIG_ADM8211=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
ifdef CONFIG_CRC_CCITT
-@@ -437,7 +437,7 @@ CONFIG_RT2800USB=m
+@@ -444,7 +444,7 @@ CONFIG_RT2800USB=m
# CONFIG_RT2800USB_RT35XX=y
CONFIG_RT2800USB_UNKNOWN=y
endif #CONFIG_CRC_CCITT
--- a/config.mk
+++ b/config.mk
-@@ -212,7 +212,7 @@ CONFIG_ATH9K_COMMON=m
+@@ -207,7 +207,7 @@ CONFIG_ATH9K_COMMON=m
# as default once we get minstrel properly tested and blessed by
# our systems engineering team. CCK rates also need to be used
# for long range considerations.
-CONFIG_ATH9K_RATE_CONTROL=y
+# CONFIG_ATH9K_RATE_CONTROL=y
-
- CONFIG_COMPAT_IWLWIFI=m
+ # PCI Drivers
+ ifdef CONFIG_PCI
--- a/config.mk
+++ b/config.mk
-@@ -195,7 +195,7 @@ CONFIG_MAC80211_HWSIM=m
+@@ -212,7 +212,7 @@ CONFIG_ATH9K_COMMON=m
+ # PCI Drivers
ifdef CONFIG_PCI
- CONFIG_ATH5K=m
-CONFIG_ATH5K_PCI=y
+# CONFIG_ATH5K_PCI=y
- # CONFIG_ATH5K_DEBUG=y
- # CONFIG_ATH5K_AHB=y
- CONFIG_ATH9K_HW=m
+ CONFIG_ATH9K=m
+
+ CONFIG_IWLAGN=m
--- a/include/linux/compat-2.6.36.h
+++ b/include/linux/compat-2.6.36.h
-@@ -101,6 +101,8 @@ int no_printk(const char *s, ...) { retu
+@@ -102,6 +102,8 @@ int no_printk(const char *s, ...) { retu
#define alloc_workqueue(name, flags, max_active) __create_workqueue(name, flags, max_active, 0)
#endif
+#define PCI_EEPROM_WIDTH_93C86 8
+
- #endif /* (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36)) */
+ #define EXTPROC 0200000
+ #define TIOCPKT_IOCTL 64
- #endif /* LINUX_26_36_COMPAT_H */
--- /dev/null
+--- a/compat/compat-2.6.39.c
++++ b/compat/compat-2.6.39.c
+@@ -10,6 +10,7 @@
+
+ #include <linux/compat.h>
+ #include <linux/tty.h>
++#include <linux/sched.h>
+
+ /*
+ * Termios Helper Methods
#endif
--- a/config.mk
+++ b/config.mk
-@@ -424,7 +424,7 @@ endif #CONFIG_COMPAT_KERNEL_29
+@@ -431,7 +431,7 @@ endif #CONFIG_COMPAT_KERNEL_29
# This activates a threading fix for usb urb.
# this is mainline commit: b3e670443b7fb8a2d29831b62b44a039c283e351
# This fix will be included in some stable releases.
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
---- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
-+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
+--- a/drivers/net/wireless/iwlegacy/iwl3945-base.c
++++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -27,6 +27,7 @@
*
*****************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
+--- a/drivers/net/wireless/iwlegacy/iwl4965-base.c
++++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c
+@@ -27,6 +27,7 @@
+ *
+ *****************************************************************************/
+
++#undef pr_fmt
+ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+ #include <linux/kernel.h>
struct ar5416IniArray iniCommon;
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1213,6 +1213,20 @@ static bool ath9k_hw_channel_change(stru
+@@ -1212,6 +1212,20 @@ static bool ath9k_hw_channel_change(stru
return true;
}
bool ath9k_hw_check_alive(struct ath_hw *ah)
{
int count = 50;
-@@ -1501,6 +1515,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -1500,6 +1514,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
if (AR_SREV_9300_20_OR_LATER(ah))
ar9003_hw_bb_watchdog_config(ah);
#include "ath9k.h"
-@@ -526,6 +527,7 @@ static void ath9k_init_misc(struct ath_s
+@@ -522,6 +523,7 @@ static void ath9k_init_misc(struct ath_s
static int ath9k_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
const struct ath_bus_ops *bus_ops)
{
struct ath_hw *ah = NULL;
struct ath_common *common;
int ret = 0, i;
-@@ -540,7 +542,7 @@ static int ath9k_init_softc(u16 devid, s
+@@ -536,7 +538,7 @@ static int ath9k_init_softc(u16 devid, s
ah->hw_version.subsysid = subsysid;
sc->sc_ah = ah;
ah->ah_flags |= AH_USE_EEPROM;
common = ath9k_hw_common(ah);
-@@ -576,6 +578,9 @@ static int ath9k_init_softc(u16 devid, s
+@@ -572,6 +574,9 @@ static int ath9k_init_softc(u16 devid, s
if (ret)
goto err_hw;
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -542,8 +542,14 @@ static int ath9k_init_softc(u16 devid, s
+@@ -538,8 +538,14 @@ static int ath9k_init_softc(u16 devid, s
ah->hw_version.subsysid = subsysid;
sc->sc_ah = ah;
/* Rfkill */
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -1204,9 +1204,6 @@ static void ath9k_stop(struct ieee80211_
+@@ -1216,9 +1216,6 @@ static void ath9k_stop(struct ieee80211_
mutex_lock(&sc->mutex);
cancel_work_sync(&sc->paprd_work);
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
-@@ -145,6 +145,21 @@ static struct ieee80211_rate ath9k_legac
+@@ -141,6 +141,21 @@ static struct ieee80211_rate ath9k_legac
RATE(540, 0x0c, 0),
};
static void ath9k_deinit_softc(struct ath_softc *sc);
/*
-@@ -746,6 +761,13 @@ int ath9k_init_device(u16 devid, struct
+@@ -742,6 +757,13 @@ int ath9k_init_device(u16 devid, struct
ath9k_init_txpower_limits(sc);
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
-@@ -1467,8 +1467,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
+@@ -1466,8 +1466,8 @@ int ath9k_hw_reset(struct ath_hw *ah, st
REG_WRITE(ah, AR_OBS, 8);
if (ah->config.rx_intr_mitigation) {
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
-@@ -2198,6 +2198,20 @@ static inline int ieee80211_sta_ps_trans
+@@ -2209,6 +2209,20 @@ static inline int ieee80211_sta_ps_trans
#define IEEE80211_TX_STATUS_HEADROOM 13
/**
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -205,6 +205,7 @@ struct ath_atx_ac {
+@@ -203,6 +203,7 @@ struct ath_atx_ac {
int sched;
struct list_head list;
struct list_head tid_q;
};
struct ath_frame_info {
-@@ -262,6 +263,8 @@ struct ath_node {
+@@ -260,6 +261,8 @@ struct ath_node {
struct ath_atx_ac ac[WME_NUM_AC];
u16 maxampdu;
u8 mpdudensity;
};
#define AGGR_CLEANUP BIT(1)
-@@ -343,6 +346,9 @@ int ath_tx_aggr_start(struct ath_softc *
+@@ -341,6 +344,9 @@ int ath_tx_aggr_start(struct ath_softc *
void ath_tx_aggr_stop(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid);
static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
const struct ieee80211_tx_queue_params *params)
{
-@@ -2130,6 +2151,7 @@ struct ieee80211_ops ath9k_ops = {
+@@ -2191,6 +2212,7 @@ struct ieee80211_ops ath9k_ops = {
.configure_filter = ath9k_configure_filter,
.sta_add = ath9k_sta_add,
.sta_remove = ath9k_sta_remove,
void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid)
{
struct ath_atx_tid *txtid;
-@@ -1492,7 +1569,6 @@ static int setup_tx_flags(struct sk_buff
+@@ -1493,7 +1570,6 @@ static int setup_tx_flags(struct sk_buff
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
int flags = 0;
flags |= ATH9K_TXDESC_INTREQ;
if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
-@@ -1755,6 +1831,9 @@ static void ath_tx_start_dma(struct ath_
+@@ -1756,6 +1832,9 @@ static void ath_tx_start_dma(struct ath_
if (txctl->paprd)
bf->bf_state.bfs_paprd_timestamp = jiffies;
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
-@@ -2223,33 +2223,6 @@ static void ath_tx_complete_poll_work(st
+@@ -2226,33 +2226,6 @@ static void ath_tx_complete_poll_work(st
} else {
txq->axq_tx_inprogress = true;
}
/*
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
-@@ -1166,14 +1166,23 @@ ieee80211_rx_h_sta_process(struct ieee80
+@@ -1156,14 +1156,23 @@ ieee80211_rx_h_sta_process(struct ieee80
if (rx->sdata->vif.type == NL80211_IFTYPE_ADHOC) {
u8 *bssid = ieee80211_get_bssid(hdr, rx->skb->len,
NL80211_IFTYPE_ADHOC);
+++ /dev/null
---- a/drivers/net/wireless/ath/ath9k/mac.c
-+++ b/drivers/net/wireless/ath/ath9k/mac.c
-@@ -891,7 +891,7 @@ void ath9k_hw_set_interrupts(struct ath_
- struct ath_common *common = ath9k_hw_common(ah);
-
- if (!(ints & ATH9K_INT_GLOBAL))
-- ath9k_hw_enable_interrupts(ah);
-+ ath9k_hw_disable_interrupts(ah);
-
- ath_dbg(common, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints);
-
-@@ -969,7 +969,8 @@ void ath9k_hw_set_interrupts(struct ath_
- REG_CLR_BIT(ah, AR_IMR_S5, AR_IMR_S5_TIM_TIMER);
- }
-
-- ath9k_hw_enable_interrupts(ah);
-+ if (ints & ATH9K_INT_GLOBAL)
-+ ath9k_hw_enable_interrupts(ah);
-
- return;
- }
--- a/drivers/net/wireless/mwl8k.c
+++ b/drivers/net/wireless/mwl8k.c
-@@ -4484,6 +4484,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
+@@ -4502,6 +4502,7 @@ MODULE_FIRMWARE("mwl8k/fmimage_8366.fw")
MODULE_FIRMWARE(MWL8K_8366_AP_FW(MWL8K_8366_AP_FW_API));
static DEFINE_PCI_DEVICE_TABLE(mwl8k_pci_id_table) = {
if (dev->dev->bus->chip_id == 0x4301) {
mask |= 0x0060;
set |= 0x0060;
-@@ -5102,10 +5107,10 @@ static void b43_print_driverinfo(void)
+@@ -5100,10 +5105,10 @@ static void b43_print_driverinfo(void)
feat_sdio = "S";
#endif
printk(KERN_INFO "Broadcom 43xx driver loaded "