+--- linux-atm-2.4.1.orig/Makefile.in
++++ linux-atm-2.4.1/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -100,14 +100,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -225,7 +225,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -274,6 +274,11 @@
+ -rm -rf $(distdir)
+ mkdir $(distdir)
+ -chmod 777 $(distdir)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/aclocal.m4
++++ linux-atm-2.4.1/aclocal.m4
+@@ -1,4 +1,4 @@
+-dnl aclocal.m4 generated automatically by aclocal 1.4-p5
++dnl aclocal.m4 generated automatically by aclocal 1.4-p6
+
+ dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ dnl This file is free software; the Free Software Foundation
+@@ -43,7 +43,8 @@
+ dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+ AC_DEFUN([AM_INIT_AUTOMAKE],
+-[AC_REQUIRE([AC_PROG_INSTALL])
++[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
++AC_REQUIRE([AC_PROG_INSTALL])
+ PACKAGE=[$1]
+ AC_SUBST(PACKAGE)
+ VERSION=[$2]
+@@ -59,13 +60,42 @@
+ AC_REQUIRE([AC_ARG_PROGRAM])
+ dnl FIXME This is truly gross.
+ missing_dir=`cd $ac_aux_dir && pwd`
+-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}, $missing_dir)
+ AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}, $missing_dir)
+ AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+ AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+ AC_REQUIRE([AC_PROG_MAKE_SET])])
+
++# Copyright 2002 Free Software Foundation, Inc.
++
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2, or (at your option)
++# any later version.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
++
++# AM_AUTOMAKE_VERSION(VERSION)
++# ----------------------------
++# Automake X.Y traces this macro to ensure aclocal.m4 has been
++# generated from the m4 files accompanying Automake X.Y.
++AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.4"])
++
++# AM_SET_CURRENT_AUTOMAKE_VERSION
++# -------------------------------
++# Call AM_AUTOMAKE_VERSION so it can be traced.
++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
++ [AM_AUTOMAKE_VERSION([1.4-p6])])
++
+ #
+ # Check to make sure that the build environment is sane.
+ #
+@@ -130,13 +160,14 @@
+ dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT
+ AC_DEFUN([AM_PROG_LEX],
+ [missing_dir=ifelse([$1],,`cd $ac_aux_dir && pwd`,$1)
+-AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex")
++AC_CHECK_PROGS(LEX, flex lex, $missing_dir/missing flex)
+ AC_PROG_LEX
+ AC_DECL_YYTEXT])
+
+ # libtool.m4 - Configure libtool for the host system. -*-Shell-script-*-
+
+ # serial 46 AC_PROG_LIBTOOL
++
+ AC_DEFUN([AC_PROG_LIBTOOL],
+ [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+
+@@ -162,6 +193,8 @@
+ AC_REQUIRE([AC_PROG_LD])dnl
+ AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+ AC_REQUIRE([AC_PROG_NM])dnl
++AC_REQUIRE([LT_AC_PROG_SED])dnl
++
+ AC_REQUIRE([AC_PROG_LN_S])dnl
+ AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+ AC_REQUIRE([AC_OBJEXT])dnl
+@@ -262,9 +295,30 @@
+
+ ])
+
++# AC_LIBTOOL_HEADER_ASSERT
++# ------------------------
++AC_DEFUN([AC_LIBTOOL_HEADER_ASSERT],
++[AC_CACHE_CHECK([whether $CC supports assert without backlinking],
++ [lt_cv_func_assert_works],
++ [case $host in
++ *-*-solaris*)
++ if test "$GCC" = yes && test "$with_gnu_ld" != yes; then
++ case `$CC --version 2>/dev/null` in
++ [[12]].*) lt_cv_func_assert_works=no ;;
++ *) lt_cv_func_assert_works=yes ;;
++ esac
++ fi
++ ;;
++ esac])
++
++if test "x$lt_cv_func_assert_works" = xyes; then
++ AC_CHECK_HEADERS(assert.h)
++fi
++])# AC_LIBTOOL_HEADER_ASSERT
++
+ # _LT_AC_CHECK_DLFCN
+ # --------------------
+-AC_DEFUN(_LT_AC_CHECK_DLFCN,
++AC_DEFUN([_LT_AC_CHECK_DLFCN],
+ [AC_CHECK_HEADERS(dlfcn.h)
+ ])# _LT_AC_CHECK_DLFCN
+
+@@ -282,10 +336,10 @@
+ # [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+ # Character class describing NM global symbol codes.
+-[symcode='[BCDEGRST]']
++symcode='[[BCDEGRST]]'
+
+ # Regexp to match symbols that can be accessed directly from C.
+-[sympat='\([_A-Za-z][_A-Za-z0-9]*\)']
++sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+ # Transform the above into a raw symbol and a C symbol.
+ symxfrm='\1 \2\3 \3'
+@@ -293,25 +347,32 @@
+ # Transform an extracted symbol line into a proper C declaration
+ lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
++# Transform an extracted symbol line into symbol name and symbol address
++lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
++
+ # Define system-specific variables.
+ case $host_os in
+ aix*)
+- [symcode='[BCDT]']
++ symcode='[[BCDT]]'
+ ;;
+ cygwin* | mingw* | pw32*)
+- [symcode='[ABCDGISTW]']
++ symcode='[[ABCDGISTW]]'
+ ;;
+ hpux*) # Its linker distinguishes data from code symbols
+ lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++ lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
++ ;;
++irix* | nonstopux*)
++ symcode='[[BCDEGRST]]'
+ ;;
+-irix*)
+- [symcode='[BCDEGRST]']
++osf*)
++ symcode='[[BCDEGQRST]]'
+ ;;
+ solaris* | sysv5*)
+- [symcode='[BDT]']
++ symcode='[[BDT]]'
+ ;;
+ sysv4)
+- [symcode='[DFNSTU]']
++ symcode='[[DFNSTU]]'
+ ;;
+ esac
+
+@@ -325,14 +386,14 @@
+
+ # If we're using GNU nm, then use its standard symbol codes.
+ if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
+- [symcode='[ABCDGISTW]']
++ symcode='[[ABCDGISTW]]'
+ fi
+
+ # Try without a prefix undercore, then with it.
+ for ac_symprfx in "" "_"; do
+
+ # Write the raw and C identifiers.
+-[lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"]
++lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+@@ -374,23 +435,23 @@
+
+ cat <<EOF >> conftest.$ac_ext
+ #if defined (__STDC__) && __STDC__
+-# define lt_ptr_t void *
++# define lt_ptr void *
+ #else
+-# define lt_ptr_t char *
++# define lt_ptr char *
+ # define const
+ #endif
+
+ /* The mapping between symbol names and symbols. */
+ const struct {
+ const char *name;
+- lt_ptr_t address;
++ lt_ptr address;
+ }
+-[lt_preloaded_symbols[] =]
++lt_preloaded_symbols[[]] =
+ {
+ EOF
+- sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
++ sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
+ cat <<\EOF >> conftest.$ac_ext
+- {0, (lt_ptr_t) 0}
++ {0, (lt_ptr) 0}
+ };
+
+ #ifdef __cplusplus
+@@ -403,7 +464,7 @@
+ save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$no_builtin_flag"
+- if AC_TRY_EVAL(ac_link) && test -s conftest; then
++ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
+ pipe_works=yes
+ fi
+ LIBS="$save_LIBS"
+@@ -434,10 +495,13 @@
+ global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
+ if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ global_symbol_to_cdecl=
++ global_symbol_to_c_name_address=
+ else
+ global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
++ global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
+ fi
+-if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
++if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
++then
+ AC_MSG_RESULT(failed)
+ else
+ AC_MSG_RESULT(ok)
+@@ -455,16 +519,17 @@
+ *-DOS) lt_cv_sys_path_separator=';' ;;
+ *) lt_cv_sys_path_separator=':' ;;
+ esac
++ PATH_SEPARATOR=$lt_cv_sys_path_separator
+ fi
+ ])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+
+ # _LT_AC_PROG_ECHO_BACKSLASH
+ # --------------------------
+ # Add some code to the start of the generated configure script which
+-# will find an echo command which doesn;t interpret backslashes.
++# will find an echo command which doesn't interpret backslashes.
+ AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+ [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+- [AC_DIVERT_PUSH(NOTICE)])
++ [AC_DIVERT_PUSH(NOTICE)])
+ _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR
+
+ # Check that we are running under the correct shell.
+@@ -530,7 +595,7 @@
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+@@ -619,7 +684,7 @@
+ # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+ # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+ # ------------------------------------------------------------------
+-AC_DEFUN(_LT_AC_TRY_DLOPEN_SELF,
++AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+ [if test "$cross_compiling" = yes; then :
+ [$4]
+ else
+@@ -706,7 +771,7 @@
+
+ # AC_LIBTOOL_DLOPEN_SELF
+ # -------------------
+-AC_DEFUN(AC_LIBTOOL_DLOPEN_SELF,
++AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+ [if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+@@ -728,16 +793,22 @@
+ ;;
+
+ *)
+- AC_CHECK_LIB(dl, dlopen, [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+- [AC_CHECK_FUNC(dlopen, lt_cv_dlopen="dlopen",
+- [AC_CHECK_FUNC(shl_load, lt_cv_dlopen="shl_load",
+- [AC_CHECK_LIB(svld, dlopen,
+- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+- [AC_CHECK_LIB(dld, shl_load,
+- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
++ AC_CHECK_FUNC([shl_load],
++ [lt_cv_dlopen="shl_load"],
++ [AC_CHECK_LIB([dld], [shl_load],
++ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
++ [AC_CHECK_FUNC([dlopen],
++ [lt_cv_dlopen="dlopen"],
++ [AC_CHECK_LIB([dl], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
++ [AC_CHECK_LIB([svld], [dlopen],
++ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
++ [AC_CHECK_LIB([dld], [dld_link],
++ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
++ ])
+ ])
+- ])
+- ])
++ ])
++ ])
+ ])
+ ;;
+ esac
+@@ -800,10 +871,10 @@
+ # Sed substitution that helps us do robust quoting. It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+ Xsed='sed -e s/^X//'
+-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
++sed_quote_subst='s/\([[\\"\\`$\\\\]]\)/\\\1/g'
+
+ # Same as above, but do not quote variable references.
+-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
++double_quote_subst='s/\([[\\"\\`\\\\]]\)/\\\1/g'
+
+ # Sed substitution to delay expansion of an escaped shell variable in a
+ # double_quote_subst'ed string.
+@@ -872,8 +943,15 @@
+ old_postuninstall_cmds=
+
+ if test -n "$RANLIB"; then
++ case $host_os in
++ openbsd*)
++ old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
++ ;;
++ *)
++ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
++ ;;
++ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+ fi
+
+ # Allow CC to be a program name with arguments.
+@@ -893,7 +971,7 @@
+ AC_MSG_RESULT($objdir)
+
+
+-AC_ARG_WITH(pic,
++AC_ARG_WITH(pic,
+ [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
+ pic_mode="$withval", pic_mode=default)
+ test -z "$pic_mode" && pic_mode=default
+@@ -921,7 +999,7 @@
+ # libC (AIX C++ library), which obviously doesn't included in libraries
+ # list by gcc. This cause undefined symbols with -static flags.
+ # This hack allows C programs to be linked with "-static -ldl", but
+- # we not sure about C++ programs.
++ # not sure about C++ programs.
+ lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
+ ;;
+ amigaos*)
+@@ -930,7 +1008,7 @@
+ # like `-m68040'.
+ lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+- beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ darwin* | rhapsody*)
+@@ -956,13 +1034,13 @@
+ # PORTME Check for PIC flags for the system compiler.
+ case $host_os in
+ aix3* | aix4* | aix5*)
++ lt_cv_prog_cc_wl='-Wl,'
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- lt_cv_prog_cc_static='-Bstatic'
+- lt_cv_prog_cc_wl='-Wl,'
++ # AIX 5 now supports IA64 processor
++ lt_cv_prog_cc_static='-Bstatic'
+ else
+- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
++ lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+@@ -973,7 +1051,7 @@
+ lt_cv_prog_cc_pic='+Z'
+ ;;
+
+- irix5* | irix6*)
++ irix5* | irix6* | nonstopux*)
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static='-non_shared'
+ # PIC (with -KPIC) is the default.
+@@ -1017,11 +1095,7 @@
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ lt_cv_prog_cc_pic='-KPIC'
+ lt_cv_prog_cc_static='-Bstatic'
+- if test "x$host_vendor" = xsni; then
+- lt_cv_prog_cc_wl='-LD'
+- else
+- lt_cv_prog_cc_wl='-Wl,'
+- fi
++ lt_cv_prog_cc_wl='-Wl,'
+ ;;
+
+ uts4*)
+@@ -1087,7 +1161,7 @@
+ # Check for any special shared library compilation flags.
+ if test -n "$lt_cv_prog_cc_shlib"; then
+ AC_MSG_WARN([\`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries])
+- if echo "$old_CC $old_CFLAGS " | [egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]"] >/dev/null; then :
++ if echo "$old_CC $old_CFLAGS " | egrep -e "[[ ]]$lt_cv_prog_cc_shlib[[ ]]" >/dev/null; then :
+ else
+ AC_MSG_WARN([add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure])
+ lt_cv_prog_cc_can_build_shared=no
+@@ -1163,6 +1237,8 @@
+ lt_cv_compiler_o_lo=no
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -c -o conftest.lo"
++ save_objext="$ac_objext"
++ ac_objext=lo
+ AC_TRY_COMPILE([], [int some_variable = 0;], [dnl
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+@@ -1172,6 +1248,7 @@
+ lt_cv_compiler_o_lo=yes
+ fi
+ ])
++ ac_objext="$save_objext"
+ CFLAGS="$save_CFLAGS"
+ ])
+ compiler_o_lo=$lt_cv_compiler_o_lo
+@@ -1268,7 +1345,7 @@
+ extract_expsyms_cmds=
+
+ case $host_os in
+-cygwin* | mingw* | pw32* )
++cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+@@ -1276,7 +1353,9 @@
+ with_gnu_ld=no
+ fi
+ ;;
+-
++openbsd*)
++ with_gnu_ld=no
++ ;;
+ esac
+
+ ld_shlibs=yes
+@@ -1363,7 +1442,7 @@
+ # can override, but on older systems we have to supply one (in ltdll.c)
+ if test "x$lt_cv_need_dllmain" = "xyes"; then
+ ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
+- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~
++ ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
+ test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+ else
+ ltdll_obj=
+@@ -1376,24 +1455,25 @@
+ # Be careful not to strip the DATA tag left be newer dlltools.
+ export_symbols_cmds="$ltdll_cmds"'
+ $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~
+- [sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//"] < $output_objdir/$soname-def > $export_symbols'
++ sed -e "1,/EXPORTS/d" -e "s/ @ [[0-9]]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols'
+
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is.
+ # If DATA tags from a recent dlltool are present, honour them!
+- archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname-def;
++ archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname-def;
+ else
+- echo EXPORTS > $output_objdir/$soname-def;
+- _lt_hint=1;
+- cat $export_symbols | while read symbol; do
+- set dummy \$symbol;
+- case \[$]# in
+- 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+- *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
+- esac;
+- _lt_hint=`expr 1 + \$_lt_hint`;
+- done;
++ echo EXPORTS > $output_objdir/$soname-def;
++ _lt_hint=1;
++ cat $export_symbols | while read symbol; do
++ set dummy \$symbol;
++ case \[$]# in
++ 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
++ 4) echo " \[$]2 \[$]3 \[$]4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
++ *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;;
++ esac;
++ _lt_hint=`expr 1 + \$_lt_hint`;
++ done;
+ fi~
+ '"$ltdll_cmds"'
+ $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+@@ -1488,80 +1568,98 @@
+ ;;
+
+ aix4* | aix5*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ exp_sym_flag='-Bexport'
++ no_entry_flag=""
++ else
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
++ for ld_flag in $LDFLAGS; do
++ case $ld_flag in
++ *-brtl*)
++ aix_use_runtimelinking=yes
++ break
++ ;;
++ esac
++ done
++ esac
++
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
++
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
++ hardcode_direct=yes
+ archive_cmds=''
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" && \
+- strings "$collect2name" | grep resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- hardcode_direct=yes
+- else
+- # We have old collect2
+- hardcode_direct=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- hardcode_minus_L=yes
+- hardcode_libdir_flag_spec='-L$libdir'
+- hardcode_libdir_separator=
+- fi
++ case $host_os in aix4.[[012]]|aix4.[[012]].*)
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" && \
++ strings "$collect2name" | grep resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ hardcode_direct=yes
++ else
++ # We have old collect2
++ hardcode_direct=unsupported
++ # It fails to find uninstalled libraries when the uninstalled
++ # path is not listed in the libpath. Setting hardcode_minus_L
++ # to unsupported forces relinking
++ hardcode_minus_L=yes
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_libdir_separator=
++ fi
++ esac
++
+ shared_flag='-shared'
+ else
++ # not using gcc
+ if test "$host_cpu" = ia64; then
+- shared_flag='-G'
++ shared_flag='${wl}-G'
+ else
+- shared_flag='${wl}-bM:SRE'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
++ else
++ shared_flag='${wl}-bM:SRE'
++ fi
+ fi
+- hardcode_direct=yes
+ fi
+
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- # Test if we are trying to use run time linking, or normal AIX style linking.
+- # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
+- aix_use_runtimelinking=no
+- for ld_flag in $LDFLAGS; do
+- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
+- aix_use_runtimelinking=yes
+- break
+- fi
+- done
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
+ # It seems that -bexpall can do strange things, so it is better to
+ # generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
++ # Warning - without using the other runtime loading flags (-brtl),
++ # -berok will link without error, but may produce a broken library.
++ allow_undefined_flag='-berok'
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+- allow_undefined_flag=' -Wl,-G'
+- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
++ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+- allow_undefined_flag="-znodefs"
+- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
++ allow_undefined_flag="-z nodefs"
++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+- hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+- # Warning - without using the other run time loading flags, -berok will
+- # link without error, but may produce a broken library.
+- allow_undefined_flag='${wl}-berok'
+- # This is a bit strange, but is similar to how AIX traditionally builds
+- # it's shared libraries.
+- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
++ hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
++ # Warning - without using the other run time loading flags,
++ # -berok will link without error, but may produce a broken library.
++ allow_undefined_flag='${wl}-berok'
++ # This is a bit strange, but is similar to how AIX traditionally builds
++ # it's shared libraries.
++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+@@ -1593,11 +1691,19 @@
+ ;;
+
+ darwin* | rhapsody*)
+- allow_undefined_flag='-undefined suppress'
++ case "$host_os" in
++ rhapsody* | darwin1.[[012]])
++ allow_undefined_flag='-undefined suppress'
++ ;;
++ *) # Darwin 1.3 on
++ allow_undefined_flag='-flat_namespace -undefined suppress'
++ ;;
++ esac
+ # FIXME: Relying on posixy $() will cause problems for
+ # cross-compilation, but unfortunately the echo tests do not
+- # yet detect zsh echo's removal of \ escapes.
+- archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)'
++ # yet detect zsh echo's removal of \ escapes. Also zsh mangles
++ # `"' quotes if we put them in here... so don't!
++ archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
+ # We need to add '_' to the symbols in $export_symbols first
+ #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
+ hardcode_direct=yes
+@@ -1649,13 +1755,14 @@
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+- irix5* | irix6*)
++ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ link_all_deplibs=yes
+ ;;
+@@ -1672,7 +1779,7 @@
+ ;;
+
+ newsos6)
+- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+@@ -1680,10 +1787,24 @@
+ ;;
+
+ openbsd*)
+- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ export_dynamic_flag_spec='${wl}-E'
++ else
++ case "$host_os" in
++ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_libdir_flag_spec='-R$libdir'
++ ;;
++ *)
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ ;;
++ esac
++ fi
+ ;;
+
+ os2*)
+@@ -1728,10 +1849,39 @@
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
++ export_dynamic_flag_spec='${wl}-Bexport'
+ ;;
+
+ solaris*)
++ # gcc --version < 3.0 without binutils cannot create self contained
++ # shared libraries reliably, requiring libgcc.a to resolve some of
++ # the object symbols generated in some cases. Libraries that use
++ # assert need libgcc.a to resolve __eprintf, for example. Linking
++ # a copy of libgcc.a into every shared library to guarantee resolving
++ # such symbols causes other problems: According to Tim Van Holder
++ # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
++ # (to the application) exception stack for one thing.
+ no_undefined_flag=' -z defs'
++ if test "$GCC" = yes; then
++ case `$CC --version 2>/dev/null` in
++ [[12]].*)
++ cat <<EOF 1>&2
++
++*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
++*** create self contained shared libraries on Solaris systems, without
++*** introducing a dependency on libgcc.a. Therefore, libtool is disabling
++*** -no-undefined support, which will at least allow you to build shared
++*** libraries. However, you may find that when you link such libraries
++*** into an application without using GCC, you have to manually add
++*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
++*** upgrade to a newer version of GCC. Another option is to rebuild your
++*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
++
++EOF
++ no_undefined_flag=
++ ;;
++ esac
++ fi
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+@@ -1740,7 +1890,7 @@
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+- [solaris2.[0-5] | solaris2.[0-5].*]) ;;
++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *) # Supported since Solaris 2.6 (maybe 2.5.1?)
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ esac
+@@ -1762,13 +1912,23 @@
+ ;;
+
+ sysv4)
+- if test "x$host_vendor" = xsno; then
+- archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts'
+- hardcode_direct=yes # is this really true???
+- else
+- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+- fi
++ case $host_vendor in
++ sni)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_direct=yes # is this really true???
++ ;;
++ siemens)
++ ## LD is ld it makes a PLAMLIB
++ ## CC just makes a GrossModule.
++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++ reload_cmds='$CC -r -o $output$reload_objs'
++ hardcode_direct=no
++ ;;
++ motorola)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
++ ;;
++ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+@@ -1909,6 +2069,9 @@
+
+ aix4* | aix5*)
+ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
+@@ -1920,22 +2083,24 @@
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+- [ aix4 | aix4.[01] | aix4.[01].*)]
+- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+- echo ' yes '
+- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+- :
+- else
+- can_build_shared=no
+- fi
+- ;;
++ aix4 | aix4.[[01]] | aix4.[[01]].*)
++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++ echo ' yes '
++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
++ :
++ else
++ can_build_shared=no
++ fi
++ ;;
+ esac
+- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+- # soname into executable. Probably we can add versioning support to
+- # collect2, so additional links can be useful in future.
++ # AIX (on Power*) has no versioning support, so currently we can
++ # not hardcode correct soname into executable. Probably we can
++ # add versioning support to collect2, so additional links can
++ # be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+- # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
+- # lib<name>.a to let people know that these are not typical AIX shared libraries.
++ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++ # instead of lib<name>.a to let people know that these are not
++ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+@@ -1944,14 +2109,14 @@
+ soname_spec='${libname}${release}.so$major'
+ fi
+ shlibpath_var=LIBPATH
+- deplibs_check_method=pass_all
+ fi
++ hardcode_into_libs=yes
+ ;;
+
+ amigaos*)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | [$Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\'']`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
+ ;;
+
+ beos*)
+@@ -1982,7 +2147,7 @@
+ case $GCC,$host_os in
+ yes,cygwin*)
+ library_names_spec='$libname.dll.a'
+- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
+ postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+@@ -1992,14 +2157,14 @@
+ $rm \$dlpath'
+ ;;
+ yes,mingw*)
+- library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll'
+- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
++ library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll'
++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
+ ;;
+ yes,pw32*)
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+ ;;
+ *)
+- library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll $libname.lib'
++ library_names_spec='${libname}`echo ${release} | sed -e 's/[[.]]/-/g'`${versuffix}.dll $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+@@ -2025,6 +2190,18 @@
+ dynamic_linker=no
+ ;;
+
++freebsd*-gnu*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
++ soname_spec='${libname}${release}.so$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='GNU/FreeBSD ld.so'
++ ;;
++
+ freebsd*)
+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+ version_type=freebsd-$objformat
+@@ -2076,14 +2253,17 @@
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+-irix5* | irix6*)
+- version_type=irix
++irix5* | irix6* | nonstopux*)
++ case $host_os in
++ nonstopux*) version_type=nonstopux ;;
++ *) version_type=irix ;;
++ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+ case $host_os in
+- irix5*)
++ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+@@ -2157,9 +2337,19 @@
+
+ openbsd*)
+ version_type=sunos
+- if test "$with_gnu_ld" = yes; then
+- need_lib_prefix=no
+- need_version=no
++ need_lib_prefix=no
++ need_version=no
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ case "$host_os" in
++ openbsd2.[[89]] | openbsd2.[[89]].*)
++ shlibpath_overrides_runpath=no
++ ;;
++ *)
++ shlibpath_overrides_runpath=yes
++ ;;
++ esac
++ else
++ shlibpath_overrides_runpath=yes
+ fi
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+@@ -2177,11 +2367,13 @@
+ osf3* | osf4* | osf5*)
+ version_type=osf
+ need_version=no
+- soname_spec='${libname}${release}.so'
+- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
++ need_lib_prefix=no
++ soname_spec='${libname}${release}.so$major'
++ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++ hardcode_into_libs=yes
+ ;;
+
+ sco3.2v5*)
+@@ -2224,6 +2416,12 @@
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
++ need_lib_prefix=no
++ export_dynamic_flag_spec='${wl}-Blargedynsym'
++ runpath_var=LD_RUN_PATH
++ ;;
++ siemens)
++ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+@@ -2270,6 +2468,33 @@
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
++AC_MSG_CHECKING([whether to build shared libraries])
++test "$can_build_shared" = "no" && enable_shared=no
++
++# On AIX, shared libraries and static libraries use the same namespace, and
++# are all built from PIC.
++case "$host_os" in
++aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
++
++aix4*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++esac
++AC_MSG_RESULT([$enable_shared])
++
++AC_MSG_CHECKING([whether to build static libraries])
++# Make sure either enable_shared or enable_static is yes.
++test "$enable_shared" = yes || enable_static=yes
++AC_MSG_RESULT([$enable_static])
++
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ enable_fast_install=no
+@@ -2351,7 +2576,7 @@
+ # Now quote all the things that may contain metacharacters while being
+ # careful not to overquote the AC_SUBSTed values. We take copies of the
+ # variables and quote the copies for generation of the libtool script.
+- for var in echo old_CC old_CFLAGS \
++ for var in echo old_CC old_CFLAGS SED \
+ AR AR_FLAGS CC LD LN_S NM SHELL \
+ reload_flag reload_cmds wl \
+ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+@@ -2363,6 +2588,7 @@
+ old_striplib striplib file_magic_cmd export_symbols_cmds \
+ deplibs_check_method allow_undefined_flag no_undefined_flag \
+ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
++ global_symbol_to_c_name_address \
+ hardcode_libdir_flag_spec hardcode_libdir_separator \
+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+ compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+@@ -2412,8 +2638,11 @@
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
++# A sed that does not truncate output.
++SED=$lt_SED
++
+ # Sed that helps us avoid accidentally triggering echo(1) options like -n.
+-Xsed="sed -e s/^X//"
++Xsed="${SED} -e s/^X//"
+
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+ # if CDPATH is set.
+@@ -2429,12 +2658,12 @@
+ # Whether or not to build shared libraries.
+ build_libtool_libs=$enable_shared
+
+-# Whether or not to add -lc for building shared libraries.
+-build_libtool_need_lc=$need_lc
+-
+ # Whether or not to build static libraries.
+ build_old_libs=$enable_static
+
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$need_lc
++
+ # Whether or not to optimize for fast installation.
+ fast_install=$enable_fast_install
+
+@@ -2600,6 +2829,9 @@
+ # Transform the output of nm in a proper C declaration
+ global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+
++# Transform the output of nm in a C name address pair
++global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
++
+ # This is the shared library runtime path variable.
+ runpath_var=$runpath_var
+
+@@ -2722,9 +2954,9 @@
+ # return TRUE;
+ # }
+ # /* ltdll.c ends here */
+- # This is a source program that is used to create import libraries
+- # on Windows for dlls which lack them. Don't remove nor modify the
+- # starting and closing comments
++ # This is a source program that is used to create import libraries
++ # on Windows for dlls which lack them. Don't remove nor modify the
++ # starting and closing comments
+ # /* impgen.c starts here */
+ # /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
+ #
+@@ -3079,6 +3311,7 @@
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+ AC_REQUIRE([AC_CANONICAL_BUILD])dnl
++AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
+ ac_prog=ld
+ if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+@@ -3092,8 +3325,8 @@
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+- [[\\/]* | [A-Za-z]:[\\/]*)]
+- [re_direlt='/[^/][^/]*/\.\./']
++ [[\\/]]* | [[A-Za-z]]:[[\\/]]*)
++ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+@@ -3117,7 +3350,7 @@
+ fi
+ AC_CACHE_VAL(lt_cv_path_LD,
+ [if test -z "$LD"; then
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+@@ -3170,7 +3403,7 @@
+ # AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
+ # -- PORTME fill in with the dynamic library characteristics
+ AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+-[AC_CACHE_CHECK([how to recognise dependant libraries],
++[AC_CACHE_CHECK([how to recognise dependent libraries],
+ lt_cv_deplibs_check_method,
+ [lt_cv_file_magic_cmd='$MAGIC_CMD'
+ lt_cv_file_magic_test_file=
+@@ -3181,7 +3414,7 @@
+ # `unknown' -- same as none, but documents that we really don't know.
+ # 'pass_all' -- all dependencies passed with no checks.
+ # 'test_compile' -- check by making test program.
+-# ['file_magic [regex]'] -- check by looking for files in library path
++# 'file_magic [[regex]]' -- check by looking for files in library path
+ # which responds to the $file_magic_cmd with a given egrep regex.
+ # If you have `file' or equivalent on your system and you're not sure
+ # whether `pass_all' will *always* work, you probably want this one.
+@@ -3196,7 +3429,7 @@
+ ;;
+
+ bsdi4*)
+- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)']
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+@@ -3210,7 +3443,7 @@
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+- rhapsody* | darwin1.[012])
++ rhapsody* | darwin1.[[012]])
+ lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+ ;;
+ *) # Darwin 1.3 on
+@@ -3225,7 +3458,7 @@
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+- [lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library']
++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+@@ -3240,14 +3473,14 @@
+ ;;
+
+ hpux10.20*|hpux11*)
+- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library']
++ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+-irix5* | irix6*)
++irix5* | irix6* | nonstopux*)
+ case $host_os in
+- irix5*)
++ irix5* | nonstopux*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+@@ -3259,7 +3492,7 @@
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+- [lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"]
++ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[[1234]] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+@@ -3269,29 +3502,39 @@
+ # This must be Linux ELF.
+ linux-gnu*)
+ case $host_cpu in
+- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
++ alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | arm* | m68k)
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;]
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$']
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so\.[[0-9]]+\.[[0-9]]+$'
+ else
+- [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$']
++ lt_cv_deplibs_check_method='match_pattern /lib[[^/\.]]+\.so$'
+ fi
+ ;;
+
+ newos6*)
+- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)']
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
++openbsd*)
++ lt_cv_file_magic_cmd=/usr/bin/file
++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
++ else
++ lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
++ fi
++ ;;
++
+ osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+@@ -3308,14 +3551,14 @@
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+-[sysv5uw[78]* | sysv4*uw2*)]
++sysv5uw[[78]]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ motorola)
+- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]']
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+@@ -3323,13 +3566,16 @@
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+- [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )']
++ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+- [lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"]
++ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
++ siemens)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
+ esac
+ ;;
+ esac
+@@ -3341,13 +3587,14 @@
+
+ # AC_PROG_NM - find the path to a BSD-compatible name lister
+ AC_DEFUN([AC_PROG_NM],
+-[AC_MSG_CHECKING([for BSD-compatible nm])
++[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl
++AC_MSG_CHECKING([for BSD-compatible nm])
+ AC_CACHE_VAL(lt_cv_path_NM,
+ [if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+@@ -3394,12 +3641,12 @@
+ ])
+
+ # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
+-# the libltdl convenience library and INCLTDL to the include flags for
++# the libltdl convenience library and LTDLINCL to the include flags for
+ # the libltdl header and adds --enable-ltdl-convenience to the
+-# configure arguments. Note that LIBLTDL and INCLTDL are not
++# configure arguments. Note that LIBLTDL and LTDLINCL are not
+ # AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
+ # provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
+-# with '${top_builddir}/' and INCLTDL will be prefixed with
++# with '${top_builddir}/' and LTDLINCL will be prefixed with
+ # '${top_srcdir}/' (note the single quotes!). If your package is not
+ # flat and you're not using automake, define top_builddir and
+ # top_srcdir appropriately in the Makefiles.
+@@ -3411,16 +3658,18 @@
+ ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+ esac
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
++ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
++ # For backwards non-gettext consistent compatibility...
++ INCLTDL="$LTDLINCL"
+ ])
+
+ # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
+-# the libltdl installable library and INCLTDL to the include flags for
++# the libltdl installable library and LTDLINCL to the include flags for
+ # the libltdl header and adds --enable-ltdl-install to the configure
+-# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
++# arguments. Note that LIBLTDL and LTDLINCL are not AC_SUBSTed, nor is
+ # AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
+ # libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
+-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
++# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed
+ # with '${top_srcdir}/' (note the single quotes!). If your package is
+ # not flat and you're not using automake, define top_builddir and
+ # top_srcdir appropriately in the Makefiles.
+@@ -3438,12 +3687,14 @@
+ if test x"$enable_ltdl_install" = x"yes"; then
+ ac_configure_args="$ac_configure_args --enable-ltdl-install"
+ LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
++ LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+ else
+ ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+ LIBLTDL="-lltdl"
+- INCLTDL=
++ LTDLINCL=
+ fi
++ # For backwards non-gettext consistent compatibility...
++ INCLTDL="$LTDLINCL"
+ ])
+
+ # old names
+@@ -3458,3 +3709,92 @@
+ # This is just to silence aclocal about the macro not being used
+ ifelse([AC_DISABLE_FAST_INSTALL])
+
++# NOTE: This macro has been submitted for inclusion into #
++# GNU Autoconf as AC_PROG_SED. When it is available in #
++# a released version of Autoconf we should remove this #
++# macro and use it instead. #
++# LT_AC_PROG_SED
++# --------------
++# Check for a fully-functional sed program, that truncates
++# as few characters as possible. Prefer GNU sed if found.
++AC_DEFUN([LT_AC_PROG_SED],
++[AC_MSG_CHECKING([for a sed that does not truncate output])
++AC_CACHE_VAL(lt_cv_path_SED,
++[# Loop through the user's path and test for sed and gsed.
++# Then use that list of sed's as ones to test for truncation.
++as_executable_p="test -f"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in sed gsed; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
++ _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
++ fi
++ done
++ done
++done
++
++ # Create a temporary directory, and hook for its removal unless debugging.
++$debug ||
++{
++ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
++ trap '{ (exit 1); exit 1; }' 1 2 13 15
++}
++
++# Create a (secure) tmp directory for tmp files.
++: ${TMPDIR=/tmp}
++{
++ tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
++ test -n "$tmp" && test -d "$tmp"
++} ||
++{
++ tmp=$TMPDIR/sed$$-$RANDOM
++ (umask 077 && mkdir $tmp)
++} ||
++{
++ echo "$me: cannot create a temporary directory in $TMPDIR" >&2
++ { (exit 1); exit 1; }
++}
++ _max=0
++ _count=0
++ # Add /usr/xpg4/bin/sed as it is typically found on Solaris
++ # along with /bin/sed that truncates output.
++ for _sed in $_sed_list /usr/xpg4/bin/sed; do
++ test ! -f ${_sed} && break
++ cat /dev/null > "$tmp/sed.in"
++ _count=0
++ echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
++ # Check for GNU sed and select it if it is found.
++ if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
++ lt_cv_path_SED=${_sed}
++ break
++ fi
++ while true; do
++ cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
++ mv "$tmp/sed.tmp" "$tmp/sed.in"
++ cp "$tmp/sed.in" "$tmp/sed.nl"
++ echo >>"$tmp/sed.nl"
++ ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
++ cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
++ # 40000 chars as input seems more than enough
++ test $_count -gt 10 && break
++ _count=`expr $_count + 1`
++ if test $_count -gt $_max; then
++ _max=$_count
++ lt_cv_path_SED=$_sed
++ fi
++ done
++ done
++ rm -rf "$tmp"
++])
++if test "X$SED" != "X"; then
++ lt_cv_path_SED=$SED
++else
++ SED=$lt_cv_path_SED
++fi
++AC_MSG_RESULT([$SED])
++])
++
+--- linux-atm-2.4.1.orig/config.guess
++++ linux-atm-2.4.1/config.guess
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Attempt to guess a canonical system name.
+-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+-# Free Software Foundation, Inc.
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+-timestamp='2001-04-20'
++timestamp='2003-05-19'
+
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+@@ -24,8 +24,9 @@
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
+-# Written by Per Bothner <bothner@cygnus.com>.
+-# Please send patches to <config-patches@gnu.org>.
++# Originally written by Per Bothner <per@bothner.com>.
++# Please send patches to <config-patches@gnu.org>. Submit a context
++# diff and a properly formatted ChangeLog entry.
+ #
+ # This script attempts to guess a canonical system name similar to
+ # config.sub. If it succeeds, it prints the system name on stdout, and
+@@ -52,7 +53,7 @@
+ GNU config.guess ($timestamp)
+
+ Originally written by Per Bothner.
+-Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+ Free Software Foundation, Inc.
+
+ This is free software; see the source for copying conditions. There is NO
+@@ -87,33 +88,44 @@
+ exit 1
+ fi
+
++trap 'exit 1' 1 2 15
+
+-dummy=dummy-$$
+-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
+
+-# CC_FOR_BUILD -- compiler used by this script.
+ # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+ # use `HOST_CC' if defined, but it is deprecated.
+
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+ case $CC_FOR_BUILD,$HOST_CC,$CC in
+- ,,) echo "int dummy(){}" > $dummy.c
+- for c in cc gcc c89 ; do
+- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1
+- if test $? = 0 ; then
+- CC_FOR_BUILD="$c"; break
+- fi
+- done
+- rm -f $dummy.c $dummy.o $dummy.rel
++ ,,) echo "int x;" > $dummy.c ;
++ for c in cc gcc c89 c99 ; do
++ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
++ CC_FOR_BUILD="$c"; break ;
++ fi ;
++ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+- CC_FOR_BUILD=no_compiler_found
++ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+-esac
++esac ;'
+
+ # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+-# (ghazi@noc.rutgers.edu 8/24/94.)
++# (ghazi@noc.rutgers.edu 1994-08-24)
+ if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+ fi
+@@ -127,29 +139,31 @@
+
+ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+- # Netbsd (nbsd) targets should (where applicable) match one or
++ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+- # Determine the machine/vendor (is the vendor relevant).
+- case "${UNAME_MACHINE}" in
+- amiga) machine=m68k-unknown ;;
+- arm32) machine=arm-unknown ;;
+- atari*) machine=m68k-atari ;;
+- sun3*) machine=m68k-sun ;;
+- mac68k) machine=m68k-apple ;;
+- macppc) machine=powerpc-apple ;;
+- hp3[0-9][05]) machine=m68k-hp ;;
+- ibmrt|romp-ibm) machine=romp-ibm ;;
+- *) machine=${UNAME_MACHINE}-unknown ;;
++ #
++ # Note: NetBSD doesn't particularly care about the vendor
++ # portion of the name. We always set it to "unknown".
++ sysctl="sysctl -n hw.machine_arch"
++ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
++ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
++ case "${UNAME_MACHINE_ARCH}" in
++ armeb) machine=armeb-unknown ;;
++ arm*) machine=arm-unknown ;;
++ sh3el) machine=shl-unknown ;;
++ sh3eb) machine=sh-unknown ;;
++ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+- case "${UNAME_MACHINE}" in
+- i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
++ case "${UNAME_MACHINE_ARCH}" in
++ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
++ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep __ELF__ >/dev/null
+ then
+@@ -165,69 +179,107 @@
+ ;;
+ esac
+ # The OS release
+- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ # Debian GNU/NetBSD machines have a different userland, and
++ # thus, need a distinct triplet. However, they do not need
++ # kernel version information, so it can be replaced with a
++ # suitable tag, in the style of linux-gnu.
++ case "${UNAME_VERSION}" in
++ Debian*)
++ release='-gnu'
++ ;;
++ *)
++ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ ;;
++ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit 0 ;;
++ amiga:OpenBSD:*:*)
++ echo m68k-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ arc:OpenBSD:*:*)
++ echo mipsel-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ hp300:OpenBSD:*:*)
++ echo m68k-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ mac68k:OpenBSD:*:*)
++ echo m68k-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ macppc:OpenBSD:*:*)
++ echo powerpc-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ mvme68k:OpenBSD:*:*)
++ echo m68k-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ mvme88k:OpenBSD:*:*)
++ echo m88k-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ mvmeppc:OpenBSD:*:*)
++ echo powerpc-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ pmax:OpenBSD:*:*)
++ echo mipsel-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ sgi:OpenBSD:*:*)
++ echo mipseb-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ sun3:OpenBSD:*:*)
++ echo m68k-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ wgrisc:OpenBSD:*:*)
++ echo mipsel-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
++ *:OpenBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
+ alpha:OSF1:*:*)
+ if test $UNAME_RELEASE = "V4.0"; then
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ fi
++ # According to Compaq, /usr/sbin/psrinfo has been available on
++ # OSF/1 and Tru64 systems produced since 1995. I hope that
++ # covers most systems running today. This code pipes the CPU
++ # types through head -n 1, so we only detect the type of CPU 0.
++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++ case "$ALPHA_CPU_TYPE" in
++ "EV4 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "EV4.5 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "LCA4 (21066/21068)")
++ UNAME_MACHINE="alpha" ;;
++ "EV5 (21164)")
++ UNAME_MACHINE="alphaev5" ;;
++ "EV5.6 (21164A)")
++ UNAME_MACHINE="alphaev56" ;;
++ "EV5.6 (21164PC)")
++ UNAME_MACHINE="alphapca56" ;;
++ "EV5.7 (21164PC)")
++ UNAME_MACHINE="alphapca57" ;;
++ "EV6 (21264)")
++ UNAME_MACHINE="alphaev6" ;;
++ "EV6.7 (21264A)")
++ UNAME_MACHINE="alphaev67" ;;
++ "EV6.8CB (21264C)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8AL (21264B)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8CX (21264D)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.9A (21264/EV69A)")
++ UNAME_MACHINE="alphaev69" ;;
++ "EV7 (21364)")
++ UNAME_MACHINE="alphaev7" ;;
++ "EV7.9 (21364A)")
++ UNAME_MACHINE="alphaev79" ;;
++ esac
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+- cat <<EOF >$dummy.s
+- .data
+-\$Lformat:
+- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+-
+- .text
+- .globl main
+- .align 4
+- .ent main
+-main:
+- .frame \$30,16,\$26,0
+- ldgp \$29,0(\$27)
+- .prologue 1
+- .long 0x47e03d80 # implver \$0
+- lda \$2,-1
+- .long 0x47e20c21 # amask \$2,\$1
+- lda \$16,\$Lformat
+- mov \$0,\$17
+- not \$1,\$18
+- jsr \$26,printf
+- ldgp \$29,0(\$26)
+- mov 0,\$16
+- jsr \$26,exit
+- .end main
+-EOF
+- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+- if test "$?" = 0 ; then
+- case `./$dummy` in
+- 0-0)
+- UNAME_MACHINE="alpha"
+- ;;
+- 1-0)
+- UNAME_MACHINE="alphaev5"
+- ;;
+- 1-1)
+- UNAME_MACHINE="alphaev56"
+- ;;
+- 1-101)
+- UNAME_MACHINE="alphapca56"
+- ;;
+- 2-303)
+- UNAME_MACHINE="alphaev6"
+- ;;
+- 2-307)
+- UNAME_MACHINE="alphaev67"
+- ;;
+- esac
+- fi
+- rm -f $dummy.s $dummy
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit 0 ;;
+ Alpha\ *:Windows_NT*:*)
+@@ -242,29 +294,11 @@
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit 0;;
+- amiga:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit 0 ;;
+- arc64:OpenBSD:*:*)
+- echo mips64el-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- arc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- hkmips:OpenBSD:*:*)
+- echo mips-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- pmax:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- sgi:OpenBSD:*:*)
+- echo mips-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- wgrisc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
++ *:[Mm]orph[Oo][Ss]:*:*)
++ echo ${UNAME_MACHINE}-unknown-morphos
+ exit 0 ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+@@ -286,6 +320,10 @@
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit 0 ;;
++ DRS?6000:UNIX_SV:4.2*:7*)
++ case `/usr/bin/uname -p` in
++ sparc) echo sparc-icl-nx7 && exit 0 ;;
++ esac ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+@@ -314,7 +352,7 @@
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ sun*:*:4.2BSD:*)
+- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+@@ -328,9 +366,6 @@
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit 0 ;;
+- atari*:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+@@ -357,18 +392,6 @@
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
+- sun3*:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mac68k:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvme68k:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+- mvme88k:OpenBSD:*:*)
+- echo m88k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
+@@ -385,6 +408,7 @@
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit 0 ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
++ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __cplusplus
+ #include <stdio.h> /* for printf() prototype */
+@@ -406,15 +430,20 @@
+ exit (-1);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy \
+- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+- && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ $CC_FOR_BUILD -o $dummy $dummy.c \
++ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
++ && exit 0
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit 0 ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit 0 ;;
++ Motorola:*:4.3:PL8-*)
++ echo powerpc-harris-powermax
++ exit 0 ;;
++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++ echo powerpc-harris-powermax
++ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
+@@ -475,6 +504,7 @@
+ exit 0 ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
++ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+@@ -486,8 +516,7 @@
+ exit(0);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ echo rs6000-ibm-aix3.2.5
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+@@ -496,7 +525,7 @@
+ fi
+ exit 0 ;;
+ *:AIX:*:[45])
+- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+@@ -536,10 +565,8 @@
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+- case "${HPUX_REV}" in
+- 11.[0-9][0-9])
+- if [ -x /usr/bin/getconf ]; then
+- sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
++ if [ -x /usr/bin/getconf ]; then
++ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+@@ -548,12 +575,13 @@
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
++ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+- fi ;;
+- esac
+- if [ "${HP_ARCH}" = "" ]; then
+- sed 's/^ //' << EOF >$dummy.c
++ fi
++ if [ "${HP_ARCH}" = "" ]; then
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+@@ -586,11 +614,21 @@
+ exit (0);
+ }
+ EOF
+- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+- rm -f $dummy.c $dummy
+- fi ;;
++ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
++ test -z "$HP_ARCH" && HP_ARCH=hppa
++ fi ;;
+ esac
++ if [ ${HP_ARCH} = "hppa2.0w" ]
++ then
++ # avoid double evaluation of $set_cc_for_build
++ test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
++ then
++ HP_ARCH="hppa2.0w"
++ else
++ HP_ARCH="hppa64"
++ fi
++ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ ia64:HP-UX:*:*)
+@@ -598,6 +636,7 @@
+ echo ia64-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ 3050*:HI-UX:*:*)
++ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+@@ -623,8 +662,7 @@
+ exit (0);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ echo unknown-hitachi-hiuxwe2
+ exit 0 ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+@@ -633,7 +671,7 @@
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit 0 ;;
+- *9??*:MPE/iX:*:*)
++ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit 0 ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+@@ -652,9 +690,6 @@
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit 0 ;;
+- hppa*:OpenBSD:*:*)
+- echo hppa-unknown-openbsd
+- exit 0 ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit 0 ;;
+@@ -673,41 +708,33 @@
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit 0 ;;
+- CRAY*X-MP:*:*:*)
+- echo xmp-cray-unicos
+- exit 0 ;;
+ CRAY*Y-MP:*:*:*)
+- echo ymp-cray-unicos${UNAME_RELEASE}
++ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
++ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
++ -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+- CRAY*T3D:*:*:*)
+- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+- CRAY-2:*:*:*)
+- echo cray2-cray-unicos
+- exit 0 ;;
++ *:UNICOS/mp:*:*)
++ echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit 0 ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
+- hp300:OpenBSD:*:*)
+- echo m68k-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+@@ -717,11 +744,19 @@
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+- *:FreeBSD:*:*)
+- echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+- exit 0 ;;
+- *:OpenBSD:*:*)
+- echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
++ # Determine whether the default compiler uses glibc.
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #include <features.h>
++ #if __GLIBC__ >= 2
++ LIBC=gnu
++ #else
++ LIBC=
++ #endif
++EOF
++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
++ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
+ exit 0 ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+@@ -732,11 +767,17 @@
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit 0 ;;
++ x86:Interix*:3*)
++ echo i586-pc-interix3
++ exit 0 ;;
++ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
++ echo i${UNAME_MACHINE}-pc-mks
++ exit 0 ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+- echo i386-pc-interix
++ echo i586-pc-interix
+ exit 0 ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+@@ -756,104 +797,71 @@
+ arm*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
++ cris:Linux:*:*)
++ echo cris-axis-linux-gnu
++ exit 0 ;;
+ ia64:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ mips:Linux:*:*)
+- cat >$dummy.c <<EOF
+-#ifdef __cplusplus
+-#include <stdio.h> /* for printf() prototype */
+-int main (int argc, char *argv[]) {
+-#else
+-int main (argc, argv) int argc; char *argv[]; {
+-#endif
+-#ifdef __MIPSEB__
+- printf ("%s-unknown-linux-gnu\n", argv[1]);
+-#endif
+-#ifdef __MIPSEL__
+- printf ("%sel-unknown-linux-gnu\n", argv[1]);
+-#endif
+- return 0;
+-}
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #undef CPU
++ #undef mips
++ #undef mipsel
++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++ CPU=mipsel
++ #else
++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++ CPU=mips
++ #else
++ CPU=
++ #endif
++ #endif
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
++ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+- ppc:Linux:*:*)
+- # Determine Lib Version
+- cat >$dummy.c <<EOF
+-#include <features.h>
+-#if defined(__GLIBC__)
+-extern char __libc_version[];
+-extern char __libc_release[];
+-#endif
+-main(argc, argv)
+- int argc;
+- char *argv[];
+-{
+-#if defined(__GLIBC__)
+- printf("%s %s\n", __libc_version, __libc_release);
+-#else
+- printf("unknown\n");
+-#endif
+- return 0;
+-}
++ mips64:Linux:*:*)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #undef CPU
++ #undef mips64
++ #undef mips64el
++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++ CPU=mips64el
++ #else
++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++ CPU=mips64
++ #else
++ CPU=
++ #endif
++ #endif
+ EOF
+- LIBC=""
+- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
+- if test "$?" = 0 ; then
+- ./$dummy | grep 1\.99 > /dev/null
+- if test "$?" = 0 ; then LIBC="libc1" ; fi
+- fi
+- rm -f $dummy.c $dummy
+- echo powerpc-unknown-linux-gnu${LIBC}
++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
++ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
++ ;;
++ ppc:Linux:*:*)
++ echo powerpc-unknown-linux-gnu
++ exit 0 ;;
++ ppc64:Linux:*:*)
++ echo powerpc64-unknown-linux-gnu
+ exit 0 ;;
+ alpha:Linux:*:*)
+- cat <<EOF >$dummy.s
+- .data
+- \$Lformat:
+- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+- .text
+- .globl main
+- .align 4
+- .ent main
+- main:
+- .frame \$30,16,\$26,0
+- ldgp \$29,0(\$27)
+- .prologue 1
+- .long 0x47e03d80 # implver \$0
+- lda \$2,-1
+- .long 0x47e20c21 # amask \$2,\$1
+- lda \$16,\$Lformat
+- mov \$0,\$17
+- not \$1,\$18
+- jsr \$26,printf
+- ldgp \$29,0(\$26)
+- mov 0,\$16
+- jsr \$26,exit
+- .end main
+-EOF
+- LIBC=""
+- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+- if test "$?" = 0 ; then
+- case `./$dummy` in
+- 0-0) UNAME_MACHINE="alpha" ;;
+- 1-0) UNAME_MACHINE="alphaev5" ;;
+- 1-1) UNAME_MACHINE="alphaev56" ;;
+- 1-101) UNAME_MACHINE="alphapca56" ;;
+- 2-303) UNAME_MACHINE="alphaev6" ;;
+- 2-307) UNAME_MACHINE="alphaev67" ;;
+- esac
+- objdump --private-headers $dummy | \
+- grep ld.so.1 > /dev/null
+- if test "$?" = 0 ; then
+- LIBC="libc1"
+- fi
+- fi
+- rm -f $dummy.s $dummy
++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
++ EV5) UNAME_MACHINE=alphaev5 ;;
++ EV56) UNAME_MACHINE=alphaev56 ;;
++ PCA56) UNAME_MACHINE=alphapca56 ;;
++ PCA57) UNAME_MACHINE=alphapca56 ;;
++ EV6) UNAME_MACHINE=alphaev6 ;;
++ EV67) UNAME_MACHINE=alphaev67 ;;
++ EV68*) UNAME_MACHINE=alphaev68 ;;
++ esac
++ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
++ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit 0 ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+@@ -883,71 +891,59 @@
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+- ld_supported_emulations=`cd /; ld --help 2>&1 \
+- | sed -ne '/supported emulations:/!d
++ # Set LC_ALL=C to ensure ld outputs messages in English.
++ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
++ | sed -ne '/supported targets:/!d
+ s/[ ][ ]*/ /g
+- s/.*supported emulations: *//
++ s/.*supported targets: *//
+ s/ .*//
+ p'`
+- case "$ld_supported_emulations" in
+- i*86linux)
+- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+- exit 0
+- ;;
+- elf_i*86)
++ case "$ld_supported_targets" in
++ elf32-i386)
+ TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+ ;;
+- i*86coff)
++ a.out-i386-linux)
++ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
++ exit 0 ;;
++ coff-i386)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+- exit 0
+- ;;
+- esac
+- # Either a pre-BFD a.out linker (linux-gnuoldld)
+- # or one that does not give us useful --help.
+- # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+- # If ld does not provide *any* "supported emulations:"
+- # that means it is gnuoldld.
+- test -z "$ld_supported_emulations" && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+- case "${UNAME_MACHINE}" in
+- i*86)
+- VENDOR=pc;
+- ;;
+- *)
+- VENDOR=unknown;
+- ;;
++ exit 0 ;;
++ "")
++ # Either a pre-BFD a.out linker (linux-gnuoldld) or
++ # one that does not give us useful --help.
++ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
++ exit 0 ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+- cat >$dummy.c <<EOF
+-#include <features.h>
+-#ifdef __cplusplus
+-#include <stdio.h> /* for printf() prototype */
+- int main (int argc, char *argv[]) {
+-#else
+- int main (argc, argv) int argc; char *argv[]; {
+-#endif
+-#ifdef __ELF__
+-# ifdef __GLIBC__
+-# if __GLIBC__ >= 2
+- printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+-# else
+- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+-# endif
+-# else
+- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+-# endif
+-#else
+- printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+-#endif
+- return 0;
+-}
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #include <features.h>
++ #ifdef __ELF__
++ # ifdef __GLIBC__
++ # if __GLIBC__ >= 2
++ LIBC=gnu
++ # else
++ LIBC=gnulibc1
++ # endif
++ # else
++ LIBC=gnulibc1
++ # endif
++ #else
++ #ifdef __INTEL_COMPILER
++ LIBC=gnu
++ #else
++ LIBC=gnuaout
++ #endif
++ #endif
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
++ test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
+ test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ ;;
+-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
+-# are messed up and put the nodename in both sysname and nodename.
+ i*86:DYNIX/ptx:4*:*)
++ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
++ # earlier versions are messed up and put the nodename in both
++ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit 0 ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+@@ -958,6 +954,23 @@
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit 0 ;;
++ i*86:OS/2:*:*)
++ # If we were able to find `uname', then EMX Unix compatibility
++ # is probably installed.
++ echo ${UNAME_MACHINE}-pc-os2-emx
++ exit 0 ;;
++ i*86:XTS-300:*:STOP)
++ echo ${UNAME_MACHINE}-unknown-stop
++ exit 0 ;;
++ i*86:atheos:*:*)
++ echo ${UNAME_MACHINE}-unknown-atheos
++ exit 0 ;;
++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
++ echo i386-unknown-lynxos${UNAME_RELEASE}
++ exit 0 ;;
++ i*86:*DOS:*:*)
++ echo ${UNAME_MACHINE}-pc-msdosdjgpp
++ exit 0 ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+@@ -966,36 +979,32 @@
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit 0 ;;
+- i*86:*:5:7*)
+- # Fixed at (any) Pentium or better
+- UNAME_MACHINE=i586
+- if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
+- echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
+- else
+- echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+- fi
++ i*86:*:5:[78]*)
++ case `/bin/uname -X | grep "^Machine"` in
++ *486*) UNAME_MACHINE=i486 ;;
++ *Pentium) UNAME_MACHINE=i586 ;;
++ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
++ esac
++ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit 0 ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit 0 ;;
+- i*86:*DOS:*:*)
+- echo ${UNAME_MACHINE}-pc-msdosdjgpp
+- exit 0 ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+@@ -1019,9 +1028,15 @@
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit 0 ;;
++ mc68k:UNIX:SYSTEM5:3.51m)
++ echo m68k-convergent-sysv
++ exit 0 ;;
++ M680?0:D-NIX:5.3:*)
++ echo m68k-diab-dnix
++ exit 0 ;;
+ M68*:*:R3V[567]*:*)
+ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
++ 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+@@ -1038,9 +1053,6 @@
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit 0 ;;
+- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+- echo i386-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+@@ -1067,8 +1079,8 @@
+ echo ns32k-sni-sysv
+ fi
+ exit 0 ;;
+- PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+- # says <Richard.M.Bartel@ccMail.Census.GOV>
++ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
++ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit 0 ;;
+ *:UNIX_System_V:4*:FTX*)
+@@ -1080,6 +1092,10 @@
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit 0 ;;
++ *:VOS:*:*)
++ # From Paul.Green@stratus.com.
++ echo hppa1.1-stratus-vos
++ exit 0 ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit 0 ;;
+@@ -1108,6 +1124,9 @@
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
++ SX-6:SUPER-UX:*:*)
++ echo sx6-nec-superux${UNAME_RELEASE}
++ exit 0 ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+@@ -1115,18 +1134,24 @@
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Darwin:*:*)
+- echo `uname -p`-apple-darwin${UNAME_RELEASE}
++ case `uname -p` in
++ *86) UNAME_PROCESSOR=i686 ;;
++ powerpc) UNAME_PROCESSOR=powerpc ;;
++ esac
++ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit 0 ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+- if test "${UNAME_MACHINE}" = "x86pc"; then
++ UNAME_PROCESSOR=`uname -p`
++ if test "$UNAME_PROCESSOR" = "x86"; then
++ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+- echo `uname -p`-${UNAME_MACHINE}-nto-qnx
++ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit 0 ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit 0 ;;
+- NSR-[KW]:NONSTOP_KERNEL:*:*)
++ NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit 0 ;;
+ *:NonStop-UX:*:*)
+@@ -1149,11 +1174,6 @@
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit 0 ;;
+- i*86:OS/2:*:*)
+- # If we were able to find `uname', then EMX Unix compatibility
+- # is probably installed.
+- echo ${UNAME_MACHINE}-pc-os2-emx
+- exit 0 ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit 0 ;;
+@@ -1177,6 +1197,7 @@
+ #echo '(No uname command or uname output not recognized.)' 1>&2
+ #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
++eval $set_cc_for_build
+ cat >$dummy.c <<EOF
+ #ifdef _SEQUENT_
+ # include <sys/types.h>
+@@ -1291,8 +1312,7 @@
+ }
+ EOF
+
+-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
+-rm -f $dummy.c $dummy
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+
+ # Apollos put the system type in the environment.
+
+--- linux-atm-2.4.1.orig/config.h.in
++++ linux-atm-2.4.1/config.h.in
+@@ -1,4 +1,4 @@
+-/* config.h.in. Generated automatically from configure.in by autoheader. */
++/* config.h.in. Generated automatically from configure.in by autoheader 2.13. */
+ #ifndef _ATM_CONFIG_H
+ #define _ATM_CONFIG_H
+
+--- linux-atm-2.4.1.orig/config.sub
++++ linux-atm-2.4.1/config.sub
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Configuration validation subroutine script.
+-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+-# Free Software Foundation, Inc.
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+
+-timestamp='2001-04-20'
++timestamp='2003-05-09'
+
+ # This file is (in principle) common to ALL GNU software.
+ # The presence of a machine in this file suggests that SOME GNU software
+@@ -29,7 +29,8 @@
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
+-# Please send patches to <config-patches@gnu.org>.
++# Please send patches to <config-patches@gnu.org>. Submit a context
++# diff and a properly formatted ChangeLog entry.
+ #
+ # Configuration subroutine to validate and canonicalize a configuration type.
+ # Supply the specified configuration type as an argument.
+@@ -117,7 +118,7 @@
+ # Here we must recognize all the valid KERNEL-OS combinations.
+ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+ case $maybe_os in
+- nto-qnx* | linux-gnu* | storm-chaos* | os2-emx*)
++ nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+@@ -157,6 +158,14 @@
+ os=-vxworks
+ basic_machine=$1
+ ;;
++ -chorusos*)
++ os=-chorusos
++ basic_machine=$1
++ ;;
++ -chorusrdb)
++ os=-chorusrdb
++ basic_machine=$1
++ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+@@ -215,26 +224,48 @@
+ case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+- tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \
+- | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \
+- | pyramid | mn10200 | mn10300 | tron | a29k \
+- | 580 | i960 | h8300 \
+- | x86 | ppcbe | mipsbe | mipsle | shbe | shle \
+- | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
+- | hppa64 \
+- | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \
+- | alphaev6[78] \
+- | we32k | ns16k | clipper | i370 | sh | sh[34] \
+- | powerpc | powerpcle \
+- | 1750a | dsp16xx | pdp10 | pdp11 \
+- | mips16 | mips64 | mipsel | mips64el \
+- | mips64orion | mips64orionel | mipstx39 | mipstx39el \
+- | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
+- | mips64vr5000 | miprs64vr5000el | mcore | s390 | s390x \
+- | sparc | sparclet | sparclite | sparc64 | sparcv9 | sparcv9b \
+- | v850 | c4x \
+- | thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \
+- | pj | pjl | h8500)
++ 1750a | 580 \
++ | a29k \
++ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
++ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
++ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
++ | clipper \
++ | d10v | d30v | dlx | dsp16xx \
++ | fr30 | frv \
++ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
++ | i370 | i860 | i960 | ia64 \
++ | ip2k \
++ | m32r | m68000 | m68k | m88k | mcore \
++ | mips | mipsbe | mipseb | mipsel | mipsle \
++ | mips16 \
++ | mips64 | mips64el \
++ | mips64vr | mips64vrel \
++ | mips64orion | mips64orionel \
++ | mips64vr4100 | mips64vr4100el \
++ | mips64vr4300 | mips64vr4300el \
++ | mips64vr5000 | mips64vr5000el \
++ | mipsisa32 | mipsisa32el \
++ | mipsisa32r2 | mipsisa32r2el \
++ | mipsisa64 | mipsisa64el \
++ | mipsisa64sb1 | mipsisa64sb1el \
++ | mipsisa64sr71k | mipsisa64sr71kel \
++ | mipstx39 | mipstx39el \
++ | mn10200 | mn10300 \
++ | msp430 \
++ | ns16k | ns32k \
++ | openrisc | or32 \
++ | pdp10 | pdp11 | pj | pjl \
++ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
++ | pyramid \
++ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
++ | sh64 | sh64le \
++ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
++ | strongarm \
++ | tahoe | thumb | tic80 | tron \
++ | v850 | v850e \
++ | we32k \
++ | x86 | xscale | xstormy16 | xtensa \
++ | z8k)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12)
+@@ -242,7 +273,7 @@
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | w65)
++ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+
+ # We use `pc' rather than `unknown'
+@@ -257,31 +288,60 @@
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+- # FIXME: clean up the formatting here.
+- vax-* | tahoe-* | i*86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \
+- | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \
+- | arm-* | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \
+- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
+- | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
+- | xmp-* | ymp-* \
+- | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \
+- | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
+- | hppa2.0n-* | hppa64-* \
+- | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \
+- | alphaev6[78]-* \
+- | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
+- | clipper-* | orion-* \
+- | sparclite-* | pdp10-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
+- | sparc64-* | sparcv9-* | sparcv9b-* | sparc86x-* \
+- | mips16-* | mips64-* | mipsel-* \
+- | mips64el-* | mips64orion-* | mips64orionel-* \
+- | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
+- | mipstx39-* | mipstx39el-* | mcore-* \
+- | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \
+- | [cjt]90-* \
+- | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
+- | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \
+- | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*)
++ 580-* \
++ | a29k-* \
++ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
++ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
++ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
++ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
++ | avr-* \
++ | bs2000-* \
++ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
++ | clipper-* | cydra-* \
++ | d10v-* | d30v-* | dlx-* \
++ | elxsi-* \
++ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
++ | h8300-* | h8500-* \
++ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
++ | i*86-* | i860-* | i960-* | ia64-* \
++ | ip2k-* \
++ | m32r-* \
++ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
++ | m88110-* | m88k-* | mcore-* \
++ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
++ | mips16-* \
++ | mips64-* | mips64el-* \
++ | mips64vr-* | mips64vrel-* \
++ | mips64orion-* | mips64orionel-* \
++ | mips64vr4100-* | mips64vr4100el-* \
++ | mips64vr4300-* | mips64vr4300el-* \
++ | mips64vr5000-* | mips64vr5000el-* \
++ | mipsisa32-* | mipsisa32el-* \
++ | mipsisa32r2-* | mipsisa32r2el-* \
++ | mipsisa64-* | mipsisa64el-* \
++ | mipsisa64sb1-* | mipsisa64sb1el-* \
++ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
++ | mipstx39-* | mipstx39el-* \
++ | msp430-* \
++ | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
++ | orion-* \
++ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
++ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
++ | pyramid-* \
++ | romp-* | rs6000-* \
++ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
++ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
++ | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
++ | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
++ | tahoe-* | thumb-* \
++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
++ | tron-* \
++ | v850-* | v850e-* | vax-* \
++ | we32k-* \
++ | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
++ | xtensa-* \
++ | ymp-* \
++ | z8k-*)
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+@@ -313,6 +373,9 @@
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
++ amd64)
++ basic_machine=x86_64-pc
++ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+@@ -344,6 +407,10 @@
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
++ c90)
++ basic_machine=c90-cray
++ os=-unicos
++ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+@@ -364,16 +431,8 @@
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+- cray | ymp)
+- basic_machine=ymp-cray
+- os=-unicos
+- ;;
+- cray2)
+- basic_machine=cray2-cray
+- os=-unicos
+- ;;
+- [cjt]90)
+- basic_machine=${basic_machine}-cray
++ cray | j90)
++ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ crds | unos)
+@@ -388,6 +447,14 @@
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
++ decsystem10* | dec10*)
++ basic_machine=pdp10-dec
++ os=-tops10
++ ;;
++ decsystem20* | dec20*)
++ basic_machine=pdp10-dec
++ os=-tops20
++ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+@@ -568,14 +635,6 @@
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+- mipsel*-linux*)
+- basic_machine=mipsel-unknown
+- os=-linux-gnu
+- ;;
+- mips*-linux*)
+- basic_machine=mips-unknown
+- os=-linux-gnu
+- ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+@@ -590,6 +649,10 @@
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
++ morphos)
++ basic_machine=powerpc-unknown
++ os=-morphos
++ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+@@ -662,6 +725,10 @@
+ np1)
+ basic_machine=np1-gould
+ ;;
++ nv1)
++ basic_machine=nv1-cray
++ os=-unicosmp
++ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+@@ -669,6 +736,10 @@
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
++ or32 | or32-*)
++ basic_machine=or32-unknown
++ os=-coff
++ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+@@ -691,19 +762,19 @@
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+- pc532 | pc532-*)
++ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+- pentium | p5 | k5 | k6 | nexgen)
++ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+- pentiumpro | p6 | 6x86 | athlon)
++ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2)
+ basic_machine=i686-pc
+ ;;
+- pentium-* | p5-* | k5-* | k6-* | nexgen-*)
++ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+@@ -718,15 +789,25 @@
+ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+- ;;
++ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+- ;;
++ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
++ ppc64) basic_machine=powerpc64-unknown
++ ;;
++ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
++ basic_machine=powerpc64le-unknown
++ ;;
++ ppc64le-* | powerpc64little-*)
++ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+@@ -744,10 +825,22 @@
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
++ s390 | s390-*)
++ basic_machine=s390-ibm
++ ;;
++ s390x | s390x-*)
++ basic_machine=s390x-ibm
++ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
++ sb1)
++ basic_machine=mipsisa64sb1-unknown
++ ;;
++ sb1el)
++ basic_machine=mipsisa64sb1el-unknown
++ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+@@ -755,7 +848,7 @@
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+- sparclite-wrs)
++ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+@@ -822,19 +915,39 @@
+ os=-dynix
+ ;;
+ t3e)
+- basic_machine=t3e-cray
++ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
++ t90)
++ basic_machine=t90-cray
++ os=-unicos
++ ;;
++ tic4x | c4x*)
++ basic_machine=tic4x-unknown
++ os=-coff
++ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
++ tic55x | c55x*)
++ basic_machine=tic55x-unknown
++ os=-coff
++ ;;
++ tic6x | c6x*)
++ basic_machine=tic6x-unknown
++ os=-coff
++ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
++ toad1)
++ basic_machine=pdp10-xkl
++ os=-tops20
++ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+@@ -859,8 +972,8 @@
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+- basic_machine=f301-fujitsu
+- ;;
++ basic_machine=f301-fujitsu
++ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+@@ -881,13 +994,13 @@
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+- xmp)
+- basic_machine=xmp-cray
+- os=-unicos
+- ;;
+- xps | xps100)
++ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
++ ymp)
++ basic_machine=ymp-cray
++ os=-unicos
++ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+@@ -908,13 +1021,6 @@
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+- mips)
+- if [ x$os = x-linux-gnu ]; then
+- basic_machine=mips-unknown
+- else
+- basic_machine=mips-mips
+- fi
+- ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+@@ -934,13 +1040,16 @@
+ we32k)
+ basic_machine=we32k-att
+ ;;
+- sh3 | sh4)
++ sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
++ sh64)
++ basic_machine=sh64-unknown
++ ;;
+ sparc | sparcv9 | sparcv9b)
+ basic_machine=sparc-sun
+ ;;
+- cydra)
++ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+@@ -955,10 +1064,6 @@
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+- c4x*)
+- basic_machine=c4x-none
+- os=-coff
+- ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+@@ -1018,11 +1123,15 @@
+ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
++ | -chorusos* | -chorusrdb* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
++ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+- | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*)
++ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
++ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
++ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
++ | -powermax* | -dnix*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+@@ -1034,8 +1143,10 @@
+ ;;
+ esac
+ ;;
++ -nto-qnx*)
++ ;;
+ -nto*)
+- os=-nto-qnx
++ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+@@ -1074,14 +1185,20 @@
+ -acis*)
+ os=-aos
+ ;;
++ -atheos*)
++ os=-atheos
++ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
++ -nova*)
++ os=-rtmk-nova
++ ;;
+ -ns2 )
+- os=-nextstep2
++ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+@@ -1120,8 +1237,14 @@
+ -xenix)
+ os=-xenix
+ ;;
+- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+- os=-mint
++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++ os=-mint
++ ;;
++ -aros*)
++ os=-aros
++ ;;
++ -kaos*)
++ os=-kaos
+ ;;
+ -none)
+ ;;
+@@ -1154,10 +1277,11 @@
+ arm*-semi)
+ os=-aout
+ ;;
++ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+- pdp11-*)
++ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+@@ -1184,6 +1308,9 @@
+ mips*-*)
+ os=-elf
+ ;;
++ or32-*)
++ os=-coff
++ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+@@ -1247,19 +1374,19 @@
+ *-next)
+ os=-nextstep3
+ ;;
+- *-gould)
++ *-gould)
+ os=-sysv
+ ;;
+- *-highlevel)
++ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+- *-sgi)
++ *-sgi)
+ os=-irix
+ ;;
+- *-siemens)
++ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+@@ -1331,7 +1458,7 @@
+ -ptx*)
+ vendor=sequent
+ ;;
+- -vxsim* | -vxworks*)
++ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+@@ -1346,6 +1473,9 @@
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
++ -vos*)
++ vendor=stratus
++ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+--- linux-atm-2.4.1.orig/configure
++++ linux-atm-2.4.1/configure
+@@ -1,24 +1,244 @@
+ #! /bin/sh
+-
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated automatically using autoconf version 2.13
+-# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
++# Generated by GNU Autoconf 2.57.
+ #
++# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
++# Free Software Foundation, Inc.
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
++## --------------------- ##
++## M4sh Initialization. ##
++## --------------------- ##
++
++# Be Bourne compatible
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
++ set -o posix
++fi
++
++# Support unset when possible.
++if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
++ as_unset=unset
++else
++ as_unset=false
++fi
++
++
++# Work around bugs in pre-3.0 UWIN ksh.
++$as_unset ENV MAIL MAILPATH
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++for as_var in \
++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
++ LC_TELEPHONE LC_TIME
++do
++ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
++ eval $as_var=C; export $as_var
++ else
++ $as_unset $as_var
++ fi
++done
++
++# Required to use basename.
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++
++# Name of the executable.
++as_me=`$as_basename "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)$' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
++ /^X\/\(\/\/\)$/{ s//\1/; q; }
++ /^X\/\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++
++
++# PATH needs CR, and LINENO needs CR and PATH.
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ echo "#! /bin/sh" >conf$$.sh
++ echo "exit 0" >>conf$$.sh
++ chmod +x conf$$.sh
++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
++ PATH_SEPARATOR=';'
++ else
++ PATH_SEPARATOR=:
++ fi
++ rm -f conf$$.sh
++fi
++
++
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x$as_lineno_3" = "x$as_lineno_2" || {
++ # Find who we are. Look in the path if we contain no path at all
++ # relative or not.
++ case $0 in
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++done
++
++ ;;
++ esac
++ # We did not find ourselves, most probably we were run as `sh COMMAND'
++ # in which case we are not to be found in the path.
++ if test "x$as_myself" = x; then
++ as_myself=$0
++ fi
++ if test ! -f "$as_myself"; then
++ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
++ { (exit 1); exit 1; }; }
++ fi
++ case $CONFIG_SHELL in
++ '')
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for as_base in sh bash ksh sh5; do
++ case $as_dir in
++ /*)
++ if ("$as_dir/$as_base" -c '
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
++ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
++ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
++ CONFIG_SHELL=$as_dir/$as_base
++ export CONFIG_SHELL
++ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
++ fi;;
++ esac
++ done
++done
++;;
++ esac
++
++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
++ # uniformly replaced by the line number. The first 'sed' inserts a
++ # line-number line before each line; the second 'sed' does the real
++ # work. The second script uses 'N' to pair each line-number line
++ # with the numbered line, and appends trailing '-' during
++ # substitution so that $LINENO is not a special case at line end.
++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
++ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
++ sed '=' <$as_myself |
++ sed '
++ N
++ s,$,-,
++ : loop
++ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
++ t loop
++ s,-$,,
++ s,^['$as_cr_digits']*\n,,
++ ' >$as_me.lineno &&
++ chmod +x $as_me.lineno ||
++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
++ { (exit 1); exit 1; }; }
++
++ # Don't try to exec as it changes $[0], causing all sort of problems
++ # (the dirname of $[0] is not the place where we might find the
++ # original and so on. Autoconf is especially sensible to this).
++ . ./$as_me.lineno
++ # Exit status is that of the last command.
++ exit
++}
++
++
++case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
++ *c*,-n*) ECHO_N= ECHO_C='
++' ECHO_T=' ' ;;
++ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
++ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
++esac
++
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++rm -f conf$$ conf$$.exe conf$$.file
++echo >conf$$.file
++if ln -s conf$$.file conf$$ 2>/dev/null; then
++ # We could just check for DJGPP; but this test a) works b) is more generic
++ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
++ if test -f conf$$.exe; then
++ # Don't use ln at all; we don't have any links
++ as_ln_s='cp -p'
++ else
++ as_ln_s='ln -s'
++ fi
++elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.file
++
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p=:
++else
++ as_mkdir_p=false
++fi
++
++as_executable_p="test -f"
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
++
++
++# IFS
++# We need space, tab and new line, in precisely that order.
++as_nl='
++'
++IFS=" $as_nl"
++
++# CDPATH.
++$as_unset CDPATH
+
+-# Defaults:
+-ac_help=
+-ac_default_prefix=/usr/local
+-# Any additions from configure.in:
+-ac_help="$ac_help
+- --enable-shared[=PKGS] build shared libraries [default=yes]"
+-ac_help="$ac_help
+- --enable-static[=PKGS] build static libraries [default=yes]"
+-ac_help="$ac_help
+- --enable-fast-install[=PKGS] optimize for fast installation [default=yes]"
+-ac_help="$ac_help
+- --with-gnu-ld assume the C compiler uses GNU ld [default=no]"
+
+ # Find the correct PATH separator. Usually this is `:', but
+ # DJGPP uses `;' like DOS.
+@@ -28,6 +248,7 @@
+ *-DOS) lt_cv_sys_path_separator=';' ;;
+ *) lt_cv_sys_path_separator=':' ;;
+ esac
++ PATH_SEPARATOR=$lt_cv_sys_path_separator
+ fi
+
+
+@@ -94,7 +315,7 @@
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+@@ -177,34 +398,86 @@
+ fi
+
+
+-ac_help="$ac_help
+- --disable-libtool-lock avoid locking (might break parallel builds)"
+-ac_help="$ac_help
+- --with-pic try to use only PIC/non-PIC objects [default=use both]"
+-ac_help="$ac_help
+- --with-uni=VERSION UNI version to use (3.0,3.1,4.0) [default=dynamic]"
+-ac_help="$ac_help
+- --enable-allow_uni30 Allow UNI 3.0 backwards-compatible extensions (if using UNI 3.1)"
+-ac_help="$ac_help
+- --enable-q2963_1 Enable peak cell rate modification as specified in Q.2963.1 (if using UNI 4.0)"
+-ac_help="$ac_help
+- --enable-cisco Enable work around for point-to-multipoint signaling bug in Cisco LS100 or LS7010 switches"
+-ac_help="$ac_help
+- --enable-thomflex Some versions of the Thomson Thomflex 5000 won't do any signaling before they get a RESTART. Enable sending of a RESTART whenever SAAL comes up."
+-ac_help="$ac_help
+- --enable-mpoa_1_1 Enable proposed MPOA 1.1 features"
+-ac_help="$ac_help
+- --enable-mpr Enable memory debugging (if MPR is installed)"
++
++# Name of the host.
++# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
++# so uname gets run too.
++ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
++
++exec 6>&1
++
++#
++# Initializations.
++#
++ac_default_prefix=/usr/local
++ac_config_libobj_dir=.
++cross_compiling=no
++subdirs=
++MFLAGS=
++MAKEFLAGS=
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++# Maximum number of lines to put in a shell here document.
++# This variable seems obsolete. It should probably be removed, and
++# only ac_max_sed_lines should be used.
++: ${ac_max_here_lines=38}
++
++# Identity of this package.
++PACKAGE_NAME=
++PACKAGE_TARNAME=
++PACKAGE_VERSION=
++PACKAGE_STRING=
++PACKAGE_BUGREPORT=
++
++ac_unique_file="src/include/atm.h"
++# Factoring default headers for most tests.
++ac_includes_default="\
++#include <stdio.h>
++#if HAVE_SYS_TYPES_H
++# include <sys/types.h>
++#endif
++#if HAVE_SYS_STAT_H
++# include <sys/stat.h>
++#endif
++#if STDC_HEADERS
++# include <stdlib.h>
++# include <stddef.h>
++#else
++# if HAVE_STDLIB_H
++# include <stdlib.h>
++# endif
++#endif
++#if HAVE_STRING_H
++# if !STDC_HEADERS && HAVE_MEMORY_H
++# include <memory.h>
++# endif
++# include <string.h>
++#endif
++#if HAVE_STRINGS_H
++# include <strings.h>
++#endif
++#if HAVE_INTTYPES_H
++# include <inttypes.h>
++#else
++# if HAVE_STDINT_H
++# include <stdint.h>
++# endif
++#endif
++#if HAVE_UNISTD_H
++# include <unistd.h>
++#endif"
++
++ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE LIBVER_CURRENT LIBVER_REVISION LIBVER_AGE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT LEX LEXLIB LEX_OUTPUT_ROOT YACC LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP EGREP LIBTOOL LIBTOOL_DEPS PERL LIBOBJS LTLIBOBJS'
++ac_subst_files=''
+
+ # Initialize some variables set by options.
++ac_init_help=
++ac_init_version=false
+ # The variables have the same names as the options, with
+ # dashes changed to underlines.
+-build=NONE
+-cache_file=./config.cache
++cache_file=/dev/null
+ exec_prefix=NONE
+-host=NONE
+ no_create=
+-nonopt=NONE
+ no_recursion=
+ prefix=NONE
+ program_prefix=NONE
+@@ -213,10 +486,15 @@
+ silent=
+ site=
+ srcdir=
+-target=NONE
+ verbose=
+ x_includes=NONE
+ x_libraries=NONE
++
++# Installation directory options.
++# These are left unexpanded so users can "make install exec_prefix=/foo"
++# and all the variables that are supposed to be based on exec_prefix
++# by default will actually change.
++# Use braces instead of parens because sh, perl, etc. also accept them.
+ bindir='${exec_prefix}/bin'
+ sbindir='${exec_prefix}/sbin'
+ libexecdir='${exec_prefix}/libexec'
+@@ -230,17 +508,9 @@
+ infodir='${prefix}/info'
+ mandir='${prefix}/man'
+
+-# Initialize some other variables.
+-subdirs=
+-MFLAGS= MAKEFLAGS=
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-# Maximum number of lines to put in a shell here document.
+-ac_max_here_lines=12
+-
+ ac_prev=
+ for ac_option
+ do
+-
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+@@ -248,59 +518,59 @@
+ continue
+ fi
+
+- case "$ac_option" in
+- -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+- *) ac_optarg= ;;
+- esac
++ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+- case "$ac_option" in
++ case $ac_option in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+- bindir="$ac_optarg" ;;
++ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+- ac_prev=build ;;
++ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+- build="$ac_optarg" ;;
++ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+- cache_file="$ac_optarg" ;;
++ cache_file=$ac_optarg ;;
++
++ --config-cache | -C)
++ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+- datadir="$ac_optarg" ;;
++ datadir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+- ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
++ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+- fi
+- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+- eval "enable_${ac_feature}=no" ;;
++ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
++ { (exit 1); exit 1; }; }
++ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
++ eval "enable_$ac_feature=no" ;;
+
+ -enable-* | --enable-*)
+- ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
++ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+- { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+- fi
+- ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+- case "$ac_option" in
+- *=*) ;;
++ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
++ { (exit 1); exit 1; }; }
++ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
++ case $ac_option in
++ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+- eval "enable_${ac_feature}='$ac_optarg'" ;;
++ eval "enable_$ac_feature='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+@@ -309,95 +579,47 @@
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+- exec_prefix="$ac_optarg" ;;
++ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+- -help | --help | --hel | --he)
+- # Omit some internal or obsolete options to make the list less imposing.
+- # This message is too long to be a string in the A/UX 3.1 sh.
+- cat << EOF
+-Usage: configure [options] [host]
+-Options: [defaults in brackets after descriptions]
+-Configuration:
+- --cache-file=FILE cache test results in FILE
+- --help print this message
+- --no-create do not create output files
+- --quiet, --silent do not print \`checking...' messages
+- --version print the version of autoconf that created configure
+-Directory and file names:
+- --prefix=PREFIX install architecture-independent files in PREFIX
+- [$ac_default_prefix]
+- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+- [same as prefix]
+- --bindir=DIR user executables in DIR [EPREFIX/bin]
+- --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+- --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+- --datadir=DIR read-only architecture-independent data in DIR
+- [PREFIX/share]
+- --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+- --sharedstatedir=DIR modifiable architecture-independent data in DIR
+- [PREFIX/com]
+- --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+- --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+- --includedir=DIR C header files in DIR [PREFIX/include]
+- --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+- --infodir=DIR info documentation in DIR [PREFIX/info]
+- --mandir=DIR man documentation in DIR [PREFIX/man]
+- --srcdir=DIR find the sources in DIR [configure dir or ..]
+- --program-prefix=PREFIX prepend PREFIX to installed program names
+- --program-suffix=SUFFIX append SUFFIX to installed program names
+- --program-transform-name=PROGRAM
+- run sed PROGRAM on installed program names
+-EOF
+- cat << EOF
+-Host type:
+- --build=BUILD configure for building on BUILD [BUILD=HOST]
+- --host=HOST configure for HOST [guessed]
+- --target=TARGET configure for TARGET [TARGET=HOST]
+-Features and packages:
+- --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+- --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+- --x-includes=DIR X include files are in DIR
+- --x-libraries=DIR X library files are in DIR
+-EOF
+- if test -n "$ac_help"; then
+- echo "--enable and --with options recognized:$ac_help"
+- fi
+- exit 0 ;;
++ -help | --help | --hel | --he | -h)
++ ac_init_help=long ;;
++ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
++ ac_init_help=recursive ;;
++ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
++ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+- ac_prev=host ;;
++ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+- host="$ac_optarg" ;;
++ host_alias=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+- includedir="$ac_optarg" ;;
++ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+- infodir="$ac_optarg" ;;
++ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+- libdir="$ac_optarg" ;;
++ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+- libexecdir="$ac_optarg" ;;
++ libexecdir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+@@ -406,19 +628,19 @@
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+- localstatedir="$ac_optarg" ;;
++ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+- mandir="$ac_optarg" ;;
++ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+- | --no-cr | --no-c)
++ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+@@ -432,26 +654,26 @@
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+- oldincludedir="$ac_optarg" ;;
++ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+- prefix="$ac_optarg" ;;
++ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+- program_prefix="$ac_optarg" ;;
++ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+- program_suffix="$ac_optarg" ;;
++ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+@@ -468,7 +690,7 @@
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+- program_transform_name="$ac_optarg" ;;
++ program_transform_name=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+@@ -478,7 +700,7 @@
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+- sbindir="$ac_optarg" ;;
++ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+@@ -489,58 +711,57 @@
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+- sharedstatedir="$ac_optarg" ;;
++ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+- site="$ac_optarg" ;;
++ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+- srcdir="$ac_optarg" ;;
++ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+- sysconfdir="$ac_optarg" ;;
++ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+- ac_prev=target ;;
++ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+- target="$ac_optarg" ;;
++ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+- -version | --version | --versio | --versi | --vers)
+- echo "configure generated by autoconf version 2.13"
+- exit 0 ;;
++ -version | --version | --versio | --versi | --vers | -V)
++ ac_init_version=: ;;
+
+ -with-* | --with-*)
+- ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
++ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+- fi
++ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid package name: $ac_package" >&2
++ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+- case "$ac_option" in
+- *=*) ;;
++ case $ac_option in
++ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+- eval "with_${ac_package}='$ac_optarg'" ;;
++ eval "with_$ac_package='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+- ac_package=`echo $ac_option|sed -e 's/-*without-//'`
++ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+- if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+- { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+- fi
+- ac_package=`echo $ac_package| sed 's/-/_/g'`
+- eval "with_${ac_package}=no" ;;
++ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid package name: $ac_package" >&2
++ { (exit 1); exit 1; }; }
++ ac_package=`echo $ac_package | sed 's/-/_/g'`
++ eval "with_$ac_package=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+@@ -551,99 +772,110 @@
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+- x_includes="$ac_optarg" ;;
++ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+- x_libraries="$ac_optarg" ;;
++ x_libraries=$ac_optarg ;;
+
+- -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
++ -*) { echo "$as_me: error: unrecognized option: $ac_option
++Try \`$0 --help' for more information." >&2
++ { (exit 1); exit 1; }; }
+ ;;
+
++ *=*)
++ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
++ # Reject names that are not valid shell variable names.
++ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
++ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
++ { (exit 1); exit 1; }; }
++ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
++ eval "$ac_envvar='$ac_optarg'"
++ export $ac_envvar ;;
++
+ *)
+- if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+- echo "configure: warning: $ac_option: invalid host type" 1>&2
+- fi
+- if test "x$nonopt" != xNONE; then
+- { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+- fi
+- nonopt="$ac_option"
++ # FIXME: should be removed in autoconf 3.0.
++ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
++ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
++ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
++ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+ done
+
+ if test -n "$ac_prev"; then
+- { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+-fi
+-
+-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+-
+-# File descriptor usage:
+-# 0 standard input
+-# 1 file creation
+-# 2 errors and warnings
+-# 3 some systems may open it to /dev/tty
+-# 4 used on the Kubota Titan
+-# 6 checking for... messages and results
+-# 5 compiler messages saved in config.log
+-if test "$silent" = yes; then
+- exec 6>/dev/null
+-else
+- exec 6>&1
++ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
++ { echo "$as_me: error: missing argument to $ac_option" >&2
++ { (exit 1); exit 1; }; }
+ fi
+-exec 5>./config.log
+
+-echo "\
+-This file contains any messages produced by compilers while
+-running configure, to aid debugging if configure makes a mistake.
+-" 1>&5
++# Be sure to have absolute paths.
++for ac_var in exec_prefix prefix
++do
++ eval ac_val=$`echo $ac_var`
++ case $ac_val in
++ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
++ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
++ { (exit 1); exit 1; }; };;
++ esac
++done
+
+-# Strip out --no-create and --no-recursion so they do not pile up.
+-# Also quote any args containing shell metacharacters.
+-ac_configure_args=
+-for ac_arg
++# Be sure to have absolute paths.
++for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
++ localstatedir libdir includedir oldincludedir infodir mandir
+ do
+- case "$ac_arg" in
+- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+- | --no-cr | --no-c) ;;
+- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+- ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+- *) ac_configure_args="$ac_configure_args $ac_arg" ;;
++ eval ac_val=$`echo $ac_var`
++ case $ac_val in
++ [\\/$]* | ?:[\\/]* ) ;;
++ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
++ { (exit 1); exit 1; }; };;
+ esac
+ done
+
+-# NLS nuisances.
+-# Only set these to C if already set. These must not be set unconditionally
+-# because not all systems understand e.g. LANG=C (notably SCO).
+-# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+-# Non-C LC_CTYPE values break the ctype check.
+-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+-if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+-if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
++# There might be people who depend on the old broken behavior: `$host'
++# used to hold the argument of --host etc.
++# FIXME: To remove some day.
++build=$build_alias
++host=$host_alias
++target=$target_alias
++
++# FIXME: To remove some day.
++if test "x$host_alias" != x; then
++ if test "x$build_alias" = x; then
++ cross_compiling=maybe
++ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
++ If a cross compiler is detected then cross compile mode will be used." >&2
++ elif test "x$build_alias" != "x$host_alias"; then
++ cross_compiling=yes
++ fi
++fi
+
+-# confdefs.h avoids OS command line length limits that DEFS can exceed.
+-rm -rf conftest* confdefs.h
+-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+-echo > confdefs.h
++ac_tool_prefix=
++test -n "$host_alias" && ac_tool_prefix=$host_alias-
++
++test "$silent" = yes && exec 6>/dev/null
+
+-# A filename unique to this package, relative to the directory that
+-# configure is in, which we can look for to find out if srcdir is correct.
+-ac_unique_file=src/include/atm.h
+
+ # Find the source files, if location was not specified.
+ if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+- ac_prog=$0
+- ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+- test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
++ ac_confdir=`(dirname "$0") 2>/dev/null ||
++$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$0" : 'X\(//\)[^/]' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$0" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+@@ -653,13 +885,453 @@
+ fi
+ if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
++ { (exit 1); exit 1; }; }
+ else
+- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
++ { (exit 1); exit 1; }; }
+ fi
+ fi
+-srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
++(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
++ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
++ { (exit 1); exit 1; }; }
++srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
++ac_env_build_alias_set=${build_alias+set}
++ac_env_build_alias_value=$build_alias
++ac_cv_env_build_alias_set=${build_alias+set}
++ac_cv_env_build_alias_value=$build_alias
++ac_env_host_alias_set=${host_alias+set}
++ac_env_host_alias_value=$host_alias
++ac_cv_env_host_alias_set=${host_alias+set}
++ac_cv_env_host_alias_value=$host_alias
++ac_env_target_alias_set=${target_alias+set}
++ac_env_target_alias_value=$target_alias
++ac_cv_env_target_alias_set=${target_alias+set}
++ac_cv_env_target_alias_value=$target_alias
++ac_env_CC_set=${CC+set}
++ac_env_CC_value=$CC
++ac_cv_env_CC_set=${CC+set}
++ac_cv_env_CC_value=$CC
++ac_env_CFLAGS_set=${CFLAGS+set}
++ac_env_CFLAGS_value=$CFLAGS
++ac_cv_env_CFLAGS_set=${CFLAGS+set}
++ac_cv_env_CFLAGS_value=$CFLAGS
++ac_env_LDFLAGS_set=${LDFLAGS+set}
++ac_env_LDFLAGS_value=$LDFLAGS
++ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
++ac_cv_env_LDFLAGS_value=$LDFLAGS
++ac_env_CPPFLAGS_set=${CPPFLAGS+set}
++ac_env_CPPFLAGS_value=$CPPFLAGS
++ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
++ac_cv_env_CPPFLAGS_value=$CPPFLAGS
++ac_env_CPP_set=${CPP+set}
++ac_env_CPP_value=$CPP
++ac_cv_env_CPP_set=${CPP+set}
++ac_cv_env_CPP_value=$CPP
++
++#
++# Report the --help message.
++#
++if test "$ac_init_help" = "long"; then
++ # Omit some internal or obsolete options to make the list less imposing.
++ # This message is too long to be a string in the A/UX 3.1 sh.
++ cat <<_ACEOF
++\`configure' configures this package to adapt to many kinds of systems.
++
++Usage: $0 [OPTION]... [VAR=VALUE]...
++
++To assign environment variables (e.g., CC, CFLAGS...), specify them as
++VAR=VALUE. See below for descriptions of some of the useful variables.
++
++Defaults for the options are specified in brackets.
++
++Configuration:
++ -h, --help display this help and exit
++ --help=short display options specific to this package
++ --help=recursive display the short help of all the included packages
++ -V, --version display version information and exit
++ -q, --quiet, --silent do not print \`checking...' messages
++ --cache-file=FILE cache test results in FILE [disabled]
++ -C, --config-cache alias for \`--cache-file=config.cache'
++ -n, --no-create do not create output files
++ --srcdir=DIR find the sources in DIR [configure dir or \`..']
++
++_ACEOF
++
++ cat <<_ACEOF
++Installation directories:
++ --prefix=PREFIX install architecture-independent files in PREFIX
++ [$ac_default_prefix]
++ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
++ [PREFIX]
++
++By default, \`make install' will install all the files in
++\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
++an installation prefix other than \`$ac_default_prefix' using \`--prefix',
++for instance \`--prefix=\$HOME'.
++
++For better control, use the options below.
++
++Fine tuning of the installation directories:
++ --bindir=DIR user executables [EPREFIX/bin]
++ --sbindir=DIR system admin executables [EPREFIX/sbin]
++ --libexecdir=DIR program executables [EPREFIX/libexec]
++ --datadir=DIR read-only architecture-independent data [PREFIX/share]
++ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
++ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
++ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
++ --libdir=DIR object code libraries [EPREFIX/lib]
++ --includedir=DIR C header files [PREFIX/include]
++ --oldincludedir=DIR C header files for non-gcc [/usr/include]
++ --infodir=DIR info documentation [PREFIX/info]
++ --mandir=DIR man documentation [PREFIX/man]
++_ACEOF
++
++ cat <<\_ACEOF
++
++Program names:
++ --program-prefix=PREFIX prepend PREFIX to installed program names
++ --program-suffix=SUFFIX append SUFFIX to installed program names
++ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
++
++System types:
++ --build=BUILD configure for building on BUILD [guessed]
++ --host=HOST cross-compile to build programs to run on HOST [BUILD]
++ --target=TARGET configure for building compilers for TARGET [HOST]
++_ACEOF
++fi
++
++if test -n "$ac_init_help"; then
++
++ cat <<\_ACEOF
++
++Optional Features:
++ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
++ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
++ --enable-shared=PKGS build shared libraries default=yes
++ --enable-static=PKGS build static libraries default=yes
++ --enable-fast-install=PKGS optimize for fast installation default=yes
++ --disable-libtool-lock avoid locking (might break parallel builds)
++ --enable-allow_uni30 Allow UNI 3.0 backwards-compatible extensions (if using UNI 3.1)
++ --enable-q2963_1 Enable peak cell rate modification as specified in Q.2963.1 (if using UNI 4.0)
++ --enable-cisco Enable work around for point-to-multipoint signaling bug in Cisco LS100 or LS7010 switches
++ --enable-thomflex Some versions of the Thomson Thomflex 5000 won't do any signaling before they get a RESTART. Enable sending of a RESTART whenever SAAL comes up.
++ --enable-mpoa_1_1 Enable proposed MPOA 1.1 features
++ --enable-mpr Enable memory debugging (if MPR is installed)
++
++Optional Packages:
++ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
++ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
++ --with-gnu-ld assume the C compiler uses GNU ld default=no
++ --with-pic try to use only PIC/non-PIC objects default=use both
++ --with-uni=VERSION UNI version to use (3.0,3.1,4.0) default=dynamic
++
++Some influential environment variables:
++ CC C compiler command
++ CFLAGS C compiler flags
++ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
++ nonstandard directory <lib dir>
++ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
++ headers in a nonstandard directory <include dir>
++ CPP C preprocessor
++
++Use these variables to override the choices made by `configure' or to help
++it to find libraries and programs with nonstandard names/locations.
++
++_ACEOF
++fi
++
++if test "$ac_init_help" = "recursive"; then
++ # If there are subdirs, report their specific --help.
++ ac_popdir=`pwd`
++ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
++ test -d $ac_dir || continue
++ ac_builddir=.
++
++if test "$ac_dir" != .; then
++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
++ # A "../" for each directory in $ac_dir_suffix.
++ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
++else
++ ac_dir_suffix= ac_top_builddir=
++fi
++
++case $srcdir in
++ .) # No --srcdir option. We are building in place.
++ ac_srcdir=.
++ if test -z "$ac_top_builddir"; then
++ ac_top_srcdir=.
++ else
++ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
++ fi ;;
++ [\\/]* | ?:[\\/]* ) # Absolute path.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir ;;
++ *) # Relative path.
++ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_builddir$srcdir ;;
++esac
++# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
++# absolute.
++ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
++ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
++ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
++ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
++
++ cd $ac_dir
++ # Check for guested configure; otherwise get Cygnus style configure.
++ if test -f $ac_srcdir/configure.gnu; then
++ echo
++ $SHELL $ac_srcdir/configure.gnu --help=recursive
++ elif test -f $ac_srcdir/configure; then
++ echo
++ $SHELL $ac_srcdir/configure --help=recursive
++ elif test -f $ac_srcdir/configure.ac ||
++ test -f $ac_srcdir/configure.in; then
++ echo
++ $ac_configure --help
++ else
++ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
++ fi
++ cd $ac_popdir
++ done
++fi
++
++test -n "$ac_init_help" && exit 0
++if $ac_init_version; then
++ cat <<\_ACEOF
++
++Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
++Free Software Foundation, Inc.
++This configure script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it.
++_ACEOF
++ exit 0
++fi
++exec 5>config.log
++cat >&5 <<_ACEOF
++This file contains any messages produced by compilers while
++running configure, to aid debugging if configure makes a mistake.
++
++It was created by $as_me, which was
++generated by GNU Autoconf 2.57. Invocation command line was
++
++ $ $0 $@
++
++_ACEOF
++{
++cat <<_ASUNAME
++## --------- ##
++## Platform. ##
++## --------- ##
++
++hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
++
++/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
++hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
++/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
++/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
++
++_ASUNAME
++
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ echo "PATH: $as_dir"
++done
++
++} >&5
++
++cat >&5 <<_ACEOF
++
++
++## ----------- ##
++## Core tests. ##
++## ----------- ##
++
++_ACEOF
++
++
++# Keep a trace of the command line.
++# Strip out --no-create and --no-recursion so they do not pile up.
++# Strip out --silent because we don't want to record it for future runs.
++# Also quote any args containing shell meta-characters.
++# Make two passes to allow for proper duplicate-argument suppression.
++ac_configure_args=
++ac_configure_args0=
++ac_configure_args1=
++ac_sep=
++ac_must_keep_next=false
++for ac_pass in 1 2
++do
++ for ac_arg
++ do
++ case $ac_arg in
++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil)
++ continue ;;
++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ case $ac_pass in
++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
++ 2)
++ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
++ if test $ac_must_keep_next = true; then
++ ac_must_keep_next=false # Got value, back to normal.
++ else
++ case $ac_arg in
++ *=* | --config-cache | -C | -disable-* | --disable-* \
++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
++ | -with-* | --with-* | -without-* | --without-* | --x)
++ case "$ac_configure_args0 " in
++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
++ esac
++ ;;
++ -* ) ac_must_keep_next=true ;;
++ esac
++ fi
++ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
++ # Get rid of the leading space.
++ ac_sep=" "
++ ;;
++ esac
++ done
++done
++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
++
++# When interrupted or exit'd, cleanup temporary files, and complete
++# config.log. We remove comments because anyway the quotes in there
++# would cause problems or look ugly.
++# WARNING: Be sure not to use single quotes in there, as some shells,
++# such as our DU 5.0 friend, will then `close' the trap.
++trap 'exit_status=$?
++ # Save into config.log some information that might help in debugging.
++ {
++ echo
++
++ cat <<\_ASBOX
++## ---------------- ##
++## Cache variables. ##
++## ---------------- ##
++_ASBOX
++ echo
++ # The following way of writing the cache mishandles newlines in values,
++{
++ (set) 2>&1 |
++ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
++ *ac_space=\ *)
++ sed -n \
++ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
++ ;;
++ *)
++ sed -n \
++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
++ ;;
++ esac;
++}
++ echo
++
++ cat <<\_ASBOX
++## ----------------- ##
++## Output variables. ##
++## ----------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_vars
++ do
++ eval ac_val=$`echo $ac_var`
++ echo "$ac_var='"'"'$ac_val'"'"'"
++ done | sort
++ echo
++
++ if test -n "$ac_subst_files"; then
++ cat <<\_ASBOX
++## ------------- ##
++## Output files. ##
++## ------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_files
++ do
++ eval ac_val=$`echo $ac_var`
++ echo "$ac_var='"'"'$ac_val'"'"'"
++ done | sort
++ echo
++ fi
++
++ if test -s confdefs.h; then
++ cat <<\_ASBOX
++## ----------- ##
++## confdefs.h. ##
++## ----------- ##
++_ASBOX
++ echo
++ sed "/^$/d" confdefs.h | sort
++ echo
++ fi
++ test "$ac_signal" != 0 &&
++ echo "$as_me: caught signal $ac_signal"
++ echo "$as_me: exit $exit_status"
++ } >&5
++ rm -f core *.core &&
++ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
++ exit $exit_status
++ ' 0
++for ac_signal in 1 2 13 15; do
++ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
++done
++ac_signal=0
++
++# confdefs.h avoids OS command line length limits that DEFS can exceed.
++rm -rf conftest* confdefs.h
++# AIX cpp loses on an empty file, so make sure it contains at least a newline.
++echo >confdefs.h
++
++# Predefined preprocessor variables.
+
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_NAME "$PACKAGE_NAME"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_VERSION "$PACKAGE_VERSION"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_STRING "$PACKAGE_STRING"
++_ACEOF
++
++
++cat >>confdefs.h <<_ACEOF
++#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
++_ACEOF
++
++
++# Let the site file select an alternate cache file if it wants to.
+ # Prefer explicitly selected file to automatically selected ones.
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+@@ -670,45 +1342,111 @@
+ fi
+ for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+- echo "loading site script $ac_site_file"
++ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
++echo "$as_me: loading site script $ac_site_file" >&6;}
++ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+ done
+
+ if test -r "$cache_file"; then
+- echo "loading cache $cache_file"
+- . $cache_file
++ # Some versions of bash will fail to source /dev/null (special
++ # files actually), so we avoid doing that.
++ if test -f "$cache_file"; then
++ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
++echo "$as_me: loading cache $cache_file" >&6;}
++ case $cache_file in
++ [\\/]* | ?:[\\/]* ) . $cache_file;;
++ *) . ./$cache_file;;
++ esac
++ fi
+ else
+- echo "creating cache $cache_file"
+- > $cache_file
++ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
++echo "$as_me: creating cache $cache_file" >&6;}
++ >$cache_file
++fi
++
++# Check that the precious variables saved in the cache have kept the same
++# value.
++ac_cache_corrupted=false
++for ac_var in `(set) 2>&1 |
++ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
++ eval ac_old_set=\$ac_cv_env_${ac_var}_set
++ eval ac_new_set=\$ac_env_${ac_var}_set
++ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
++ eval ac_new_val="\$ac_env_${ac_var}_value"
++ case $ac_old_set,$ac_new_set in
++ set,)
++ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
++echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,set)
++ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
++echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
++ ac_cache_corrupted=: ;;
++ ,);;
++ *)
++ if test "x$ac_old_val" != "x$ac_new_val"; then
++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
++echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
++echo "$as_me: former value: $ac_old_val" >&2;}
++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
++echo "$as_me: current value: $ac_new_val" >&2;}
++ ac_cache_corrupted=:
++ fi;;
++ esac
++ # Pass precious variables to config.status.
++ if test "$ac_new_set" = set; then
++ case $ac_new_val in
++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
++ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
++ *) ac_arg=$ac_var=$ac_new_val ;;
++ esac
++ case " $ac_configure_args " in
++ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
++ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
++ esac
++ fi
++done
++if $ac_cache_corrupted; then
++ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
++echo "$as_me: error: changes in the environment can compromise the build" >&2;}
++ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
++echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+ ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
+-
+-ac_exeext=
+-ac_objext=o
+-if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+- # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+- if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+- ac_n= ac_c='
+-' ac_t=' '
+- else
+- ac_n=-n ac_c= ac_t=
+- fi
+-else
+- ac_n= ac_c='\c' ac_t=
+-fi
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++
++
++
++
++
++
++
++
+
+
+
+
+
+
++
++
++
++
++ ac_config_headers="$ac_config_headers config.h"
++
++ ac_config_commands="$ac_config_commands default-1"
++
++
+ ac_aux_dir=
+ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+@@ -719,105 +1457,105 @@
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
++ elif test -f $ac_dir/shtool; then
++ ac_aux_dir=$ac_dir
++ ac_install_sh="$ac_aux_dir/shtool install -c"
++ break
+ fi
+ done
+ if test -z "$ac_aux_dir"; then
+- { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+-fi
+-ac_config_guess=$ac_aux_dir/config.guess
+-ac_config_sub=$ac_aux_dir/config.sub
+-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+-
+-
+-# Do some error checking and defaulting for the host and target type.
+-# The inputs are:
+-# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+-#
+-# The rules are:
+-# 1. You are not allowed to specify --host, --target, and nonopt at the
+-# same time.
+-# 2. Host defaults to nonopt.
+-# 3. If nonopt is not specified, then host defaults to the current host,
+-# as determined by config.guess.
+-# 4. Target and build default to nonopt.
+-# 5. If nonopt is not specified, then target and build default to host.
+-
+-# The aliases save the names the user supplied, while $host etc.
+-# will get canonicalized.
+-case $host---$target---$nonopt in
+-NONE---*---* | *---NONE---* | *---*---NONE) ;;
+-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+-esac
+-
++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5
++echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;}
++ { (exit 1); exit 1; }; }
++fi
++ac_config_guess="$SHELL $ac_aux_dir/config.guess"
++ac_config_sub="$SHELL $ac_aux_dir/config.sub"
++ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+ # Make sure we can run config.sub.
+-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+-fi
++$ac_config_sub sun4 >/dev/null 2>&1 ||
++ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
++echo "$as_me: error: cannot run $ac_config_sub" >&2;}
++ { (exit 1); exit 1; }; }
++
++echo "$as_me:$LINENO: checking build system type" >&5
++echo $ECHO_N "checking build system type... $ECHO_C" >&6
++if test "${ac_cv_build+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_build_alias=$build_alias
++test -z "$ac_cv_build_alias" &&
++ ac_cv_build_alias=`$ac_config_guess`
++test -z "$ac_cv_build_alias" &&
++ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
++echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
++ { (exit 1); exit 1; }; }
++ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
++ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
++echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
++ { (exit 1); exit 1; }; }
++
++fi
++echo "$as_me:$LINENO: result: $ac_cv_build" >&5
++echo "${ECHO_T}$ac_cv_build" >&6
++build=$ac_cv_build
++build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
++build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
++build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
++
++
++echo "$as_me:$LINENO: checking host system type" >&5
++echo $ECHO_N "checking host system type... $ECHO_C" >&6
++if test "${ac_cv_host+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_host_alias=$host_alias
++test -z "$ac_cv_host_alias" &&
++ ac_cv_host_alias=$ac_cv_build_alias
++ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
++ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
++echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
++ { (exit 1); exit 1; }; }
++
++fi
++echo "$as_me:$LINENO: result: $ac_cv_host" >&5
++echo "${ECHO_T}$ac_cv_host" >&6
++host=$ac_cv_host
++host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
++host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
++host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
++
++
++echo "$as_me:$LINENO: checking target system type" >&5
++echo $ECHO_N "checking target system type... $ECHO_C" >&6
++if test "${ac_cv_target+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_target_alias=$target_alias
++test "x$ac_cv_target_alias" = "x" &&
++ ac_cv_target_alias=$ac_cv_host_alias
++ac_cv_target=`$ac_config_sub $ac_cv_target_alias` ||
++ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5
++echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;}
++ { (exit 1); exit 1; }; }
++
++fi
++echo "$as_me:$LINENO: result: $ac_cv_target" >&5
++echo "${ECHO_T}$ac_cv_target" >&6
++target=$ac_cv_target
++target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
++target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
++target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+-echo $ac_n "checking host system type""... $ac_c" 1>&6
+-echo "configure:760: checking host system type" >&5
+
+-host_alias=$host
+-case "$host_alias" in
+-NONE)
+- case $nonopt in
+- NONE)
+- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+- fi ;;
+- *) host_alias=$nonopt ;;
+- esac ;;
+-esac
+-
+-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+-echo "$ac_t""$host" 1>&6
+-
+-echo $ac_n "checking target system type""... $ac_c" 1>&6
+-echo "configure:781: checking target system type" >&5
+-
+-target_alias=$target
+-case "$target_alias" in
+-NONE)
+- case $nonopt in
+- NONE) target_alias=$host_alias ;;
+- *) target_alias=$nonopt ;;
+- esac ;;
+-esac
+-
+-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+-echo "$ac_t""$target" 1>&6
+-
+-echo $ac_n "checking build system type""... $ac_c" 1>&6
+-echo "configure:799: checking build system type" >&5
+-
+-build_alias=$build
+-case "$build_alias" in
+-NONE)
+- case $nonopt in
+- NONE) build_alias=$host_alias ;;
+- *) build_alias=$nonopt ;;
+- esac ;;
+-esac
+-
+-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+-echo "$ac_t""$build" 1>&6
+-
+-test "$host_alias" != "$target_alias" &&
++# The aliases save the names the user supplied, while $host etc.
++# will get canonicalized.
++test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+-
++am__api_version="1.4"
+ # Find a good install program. We prefer a C program (faster),
+ # so one script is as good as another. But avoid the broken or
+ # incompatible versions:
+@@ -825,65 +1563,78 @@
+ # SunOS /usr/etc/install
+ # IRIX /sbin/install
+ # AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
+ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+ # ./install, which can be erroneously created by make from ./install.sh.
+-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+-echo "configure:834: checking for a BSD compatible install" >&5
++echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+ if test -z "$INSTALL"; then
+-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test "${ac_cv_path_install+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+- for ac_dir in $PATH; do
+- # Account for people who put trailing slashes in PATH elements.
+- case "$ac_dir/" in
+- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+- *)
+- # OSF1 and SCO ODT 3.0 have their own names for install.
+- # Don't use installbsd from OSF since it installs stuff as root
+- # by default.
+- for ac_prog in ginstall scoinst install; do
+- if test -f $ac_dir/$ac_prog; then
+- if test $ac_prog = install &&
+- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+- # AIX install. It has an incompatible calling convention.
+- :
+- else
+- ac_cv_path_install="$ac_dir/$ac_prog -c"
+- break 2
+- fi
+- fi
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ # Account for people who put trailing slashes in PATH elements.
++case $as_dir/ in
++ ./ | .// | /cC/* | \
++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++ /usr/ucb/* ) ;;
++ *)
++ # OSF1 and SCO ODT 3.0 have their own names for install.
++ # Don't use installbsd from OSF since it installs stuff as root
++ # by default.
++ for ac_prog in ginstall scoinst install; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
++ if test $ac_prog = install &&
++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # AIX install. It has an incompatible calling convention.
++ :
++ elif test $ac_prog = install &&
++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
++ else
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
++ fi
++ fi
+ done
+- ;;
+- esac
+- done
+- IFS="$ac_save_IFS"
++ done
++ ;;
++esac
++done
++
+
+ fi
+ if test "${ac_cv_path_install+set}" = set; then
+- INSTALL="$ac_cv_path_install"
++ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+- INSTALL="$ac_install_sh"
++ INSTALL=$ac_install_sh
+ fi
+ fi
+-echo "$ac_t""$INSTALL" 1>&6
++echo "$as_me:$LINENO: result: $INSTALL" >&5
++echo "${ECHO_T}$INSTALL" >&6
+
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+ # It thinks the first close brace ends the variable substitution.
+ test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+-echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+-echo "configure:887: checking whether build environment is sane" >&5
++echo "$as_me:$LINENO: checking whether build environment is sane" >&5
++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+ # Just in case
+ sleep 1
+ echo timestamp > conftestfile
+@@ -905,8 +1656,11 @@
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+- { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+-alias in your environment" 1>&2; exit 1; }
++ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken
++alias in your environment" >&5
++echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
++alias in your environment" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+ test "$2" = conftestfile
+@@ -915,54 +1669,54 @@
+ # Ok.
+ :
+ else
+- { echo "configure: error: newly created file is older than distributed files!
+-Check your system clock" 1>&2; exit 1; }
++ { { echo "$as_me:$LINENO: error: newly created file is older than distributed files!
++Check your system clock" >&5
++echo "$as_me: error: newly created file is older than distributed files!
++Check your system clock" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+ rm -f conftest*
+-echo "$ac_t""yes" 1>&6
+-if test "$program_transform_name" = s,x,x,; then
+- program_transform_name=
+-else
+- # Double any \ or $. echo might interpret backslashes.
+- cat <<\EOF_SED > conftestsed
+-s,\\,\\\\,g; s,\$,$$,g
+-EOF_SED
+- program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+- rm -f conftestsed
+-fi
++echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
+ test "$program_prefix" != NONE &&
+- program_transform_name="s,^,${program_prefix},; $program_transform_name"
++ program_transform_name="s,^,$program_prefix,;$program_transform_name"
+ # Use a double $ so make ignores it.
+ test "$program_suffix" != NONE &&
+- program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+-
+-# sed with no file args requires a program.
+-test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+-
+-echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+-echo "configure:944: checking whether ${MAKE-make} sets \${MAKE}" >&5
+-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
++# Double any \ or $. echo might interpret backslashes.
++# By default was `s,x,x', remove it if useless.
++cat <<\_ACEOF >conftest.sed
++s/[\\$]/&&/g;s/;s,x,x,$//
++_ACEOF
++program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
++rm conftest.sed
++
++echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
++set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
++if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- cat > conftestmake <<\EOF
++ cat >conftest.make <<\_ACEOF
+ all:
+- @echo 'ac_maketemp="${MAKE}"'
+-EOF
++ @echo 'ac_maketemp="$(MAKE)"'
++_ACEOF
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+-eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
++eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+ if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+ else
+ eval ac_cv_prog_make_${ac_make}_set=no
+ fi
+-rm -f conftestmake
++rm -f conftest.make
+ fi
+ if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++ echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+ fi
+
+@@ -972,82 +1726,96 @@
+ VERSION=2.4.1
+
+ if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+- { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
++ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
++echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+-cat >> confdefs.h <<EOF
++
++cat >>confdefs.h <<_ACEOF
+ #define PACKAGE "$PACKAGE"
+-EOF
++_ACEOF
+
+-cat >> confdefs.h <<EOF
++
++cat >>confdefs.h <<_ACEOF
+ #define VERSION "$VERSION"
+-EOF
++_ACEOF
+
+
+
+ missing_dir=`cd $ac_aux_dir && pwd`
+-echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+-echo "configure:990: checking for working aclocal" >&5
++echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
++echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6
+ # Run test in a subshell; some versions of sh will print an error if
+ # an executable is not found, even if stderr is redirected.
+ # Redirect stdin to placate older versions of autoconf. Sigh.
+-if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+- ACLOCAL=aclocal
+- echo "$ac_t""found" 1>&6
+-else
+- ACLOCAL="$missing_dir/missing aclocal"
+- echo "$ac_t""missing" 1>&6
++if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
++ ACLOCAL=aclocal-${am__api_version}
++ echo "$as_me:$LINENO: result: found" >&5
++echo "${ECHO_T}found" >&6
++else
++ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
++ echo "$as_me:$LINENO: result: missing" >&5
++echo "${ECHO_T}missing" >&6
+ fi
+
+-echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+-echo "configure:1003: checking for working autoconf" >&5
++echo "$as_me:$LINENO: checking for working autoconf" >&5
++echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6
+ # Run test in a subshell; some versions of sh will print an error if
+ # an executable is not found, even if stderr is redirected.
+ # Redirect stdin to placate older versions of autoconf. Sigh.
+ if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+- echo "$ac_t""found" 1>&6
++ echo "$as_me:$LINENO: result: found" >&5
++echo "${ECHO_T}found" >&6
+ else
+ AUTOCONF="$missing_dir/missing autoconf"
+- echo "$ac_t""missing" 1>&6
++ echo "$as_me:$LINENO: result: missing" >&5
++echo "${ECHO_T}missing" >&6
+ fi
+
+-echo $ac_n "checking for working automake""... $ac_c" 1>&6
+-echo "configure:1016: checking for working automake" >&5
++echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
++echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6
+ # Run test in a subshell; some versions of sh will print an error if
+ # an executable is not found, even if stderr is redirected.
+ # Redirect stdin to placate older versions of autoconf. Sigh.
+-if (automake --version) < /dev/null > /dev/null 2>&1; then
+- AUTOMAKE=automake
+- echo "$ac_t""found" 1>&6
+-else
+- AUTOMAKE="$missing_dir/missing automake"
+- echo "$ac_t""missing" 1>&6
++if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
++ AUTOMAKE=automake-${am__api_version}
++ echo "$as_me:$LINENO: result: found" >&5
++echo "${ECHO_T}found" >&6
++else
++ AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
++ echo "$as_me:$LINENO: result: missing" >&5
++echo "${ECHO_T}missing" >&6
+ fi
+
+-echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+-echo "configure:1029: checking for working autoheader" >&5
++echo "$as_me:$LINENO: checking for working autoheader" >&5
++echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6
+ # Run test in a subshell; some versions of sh will print an error if
+ # an executable is not found, even if stderr is redirected.
+ # Redirect stdin to placate older versions of autoconf. Sigh.
+ if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+- echo "$ac_t""found" 1>&6
++ echo "$as_me:$LINENO: result: found" >&5
++echo "${ECHO_T}found" >&6
+ else
+ AUTOHEADER="$missing_dir/missing autoheader"
+- echo "$ac_t""missing" 1>&6
++ echo "$as_me:$LINENO: result: missing" >&5
++echo "${ECHO_T}missing" >&6
+ fi
+
+-echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+-echo "configure:1042: checking for working makeinfo" >&5
++echo "$as_me:$LINENO: checking for working makeinfo" >&5
++echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6
+ # Run test in a subshell; some versions of sh will print an error if
+ # an executable is not found, even if stderr is redirected.
+ # Redirect stdin to placate older versions of autoconf. Sigh.
+ if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+- echo "$ac_t""found" 1>&6
++ echo "$as_me:$LINENO: result: found" >&5
++echo "${ECHO_T}found" >&6
+ else
+ MAKEINFO="$missing_dir/missing makeinfo"
+- echo "$ac_t""missing" 1>&6
++ echo "$as_me:$LINENO: result: missing" >&5
++echo "${ECHO_T}missing" >&6
+ fi
+
+
+@@ -1059,214 +1827,643 @@
+
+
+
+-# Extract the first word of "gcc", so it can be a program name with args.
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}gcc; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$CC"; then
++ ac_cv_prog_CC="$CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_CC="${ac_tool_prefix}gcc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++CC=$ac_cv_prog_CC
++if test -n "$CC"; then
++ echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_CC"; then
++ ac_ct_CC=$CC
++ # Extract the first word of "gcc", so it can be a program name with args.
+ set dummy gcc; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1066: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_CC="gcc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ CC=$ac_ct_CC
++else
++ CC="$ac_cv_prog_CC"
++fi
++
++if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
++set dummy ${ac_tool_prefix}cc; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_CC="gcc"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_CC="${ac_tool_prefix}cc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
+ fi
+ fi
+-CC="$ac_cv_prog_CC"
++CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- echo "$ac_t""$CC" 1>&6
++ echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++fi
++if test -z "$ac_cv_prog_CC"; then
++ ac_ct_CC=$CC
++ # Extract the first word of "cc", so it can be a program name with args.
++set dummy cc; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_CC="cc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
++ CC=$ac_ct_CC
++else
++ CC="$ac_cv_prog_CC"
++fi
++
++fi
+ if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+ set dummy cc; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1096: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+- ac_prog_rejected=yes
+- continue
+- fi
+- ac_cv_prog_CC="cc"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
++ ac_prog_rejected=yes
++ continue
++ fi
++ ac_cv_prog_CC="cc"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
+ if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+- if test $# -gt 0; then
++ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+- set dummy "$ac_dir/$ac_word" "$@"
+- shift
+- ac_cv_prog_CC="$@"
++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+ fi
+ fi
+ fi
+-CC="$ac_cv_prog_CC"
++CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- echo "$ac_t""$CC" 1>&6
++ echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+- if test -z "$CC"; then
+- case "`uname -s`" in
+- *win32* | *WIN32*)
+- # Extract the first word of "cl", so it can be a program name with args.
+-set dummy cl; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1147: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++fi
++if test -z "$CC"; then
++ if test -n "$ac_tool_prefix"; then
++ for ac_prog in cl
++ do
++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
++set dummy $ac_tool_prefix$ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_CC="cl"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
+ fi
+ fi
+-CC="$ac_cv_prog_CC"
++CC=$ac_cv_prog_CC
+ if test -n "$CC"; then
+- echo "$ac_t""$CC" 1>&6
++ echo "$as_me:$LINENO: result: $CC" >&5
++echo "${ECHO_T}$CC" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+- ;;
+- esac
++
++ test -n "$CC" && break
++ done
++fi
++if test -z "$CC"; then
++ ac_ct_CC=$CC
++ for ac_prog in cl
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if test -n "$ac_ct_CC"; then
++ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
++else
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_CC="$ac_prog"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
+ fi
+- test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
++done
++done
++
+ fi
++fi
++ac_ct_CC=$ac_cv_prog_ac_ct_CC
++if test -n "$ac_ct_CC"; then
++ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
++echo "${ECHO_T}$ac_ct_CC" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ test -n "$ac_ct_CC" && break
++done
+
+-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+-echo "configure:1179: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
++ CC=$ac_ct_CC
++fi
+
+-ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
++fi
+
+-cat > conftest.$ac_ext << EOF
+
+-#line 1190 "configure"
+-#include "confdefs.h"
++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
++See \`config.log' for more details." >&5
++echo "$as_me: error: no acceptable C compiler found in \$PATH
++See \`config.log' for more details." >&2;}
++ { (exit 1); exit 1; }; }
++
++# Provide some information about the compiler.
++echo "$as_me:$LINENO:" \
++ "checking for C compiler version" >&5
++ac_compiler=`set X $ac_compile; echo $2`
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
++ (eval $ac_compiler --version </dev/null >&5) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
++ (eval $ac_compiler -v </dev/null >&5) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }
++{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
++ (eval $ac_compiler -V </dev/null >&5) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }
++
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-main(){return(0);}
+-EOF
+-if { (eval echo configure:1195: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- ac_cv_prog_cc_works=yes
+- # If we can't run a trivial program, we are probably using a cross compiler.
+- if (./conftest; exit) 2>/dev/null; then
+- ac_cv_prog_cc_cross=no
+- else
+- ac_cv_prog_cc_cross=yes
+- fi
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files a.out a.exe b.out"
++# Try to create an executable without -o first, disregard a.out.
++# It will help us diagnose broken compilers, and finding out an intuition
++# of exeext.
++echo "$as_me:$LINENO: checking for C compiler default output" >&5
++echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
++ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
++if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
++ (eval $ac_link_default) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ # Find the output, starting from the most likely. This scheme is
++# not robust to junk in `.', hence go to wildcards (a.*) only as a last
++# resort.
++
++# Be careful to initialize this variable, since it used to be cached.
++# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
++ac_cv_exeext=
++# b.out is created by i960 compilers.
++for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
++do
++ test -f "$ac_file" || continue
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
++ ;;
++ conftest.$ac_ext )
++ # This is the source file.
++ ;;
++ [ab].out )
++ # We found the default executable, but exeext='' is most
++ # certainly right.
++ break;;
++ *.* )
++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ # FIXME: I believe we export ac_cv_exeext for Libtool,
++ # but it would be cool to find out if it's true. Does anybody
++ # maintain Libtool? --akim.
++ export ac_cv_exeext
++ break;;
++ * )
++ break;;
++ esac
++done
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- ac_cv_prog_cc_works=no
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
++See \`config.log' for more details." >&5
++echo "$as_me: error: C compiler cannot create executables
++See \`config.log' for more details." >&2;}
++ { (exit 77); exit 77; }; }
++fi
++
++ac_exeext=$ac_cv_exeext
++echo "$as_me:$LINENO: result: $ac_file" >&5
++echo "${ECHO_T}$ac_file" >&6
++
++# Check the compiler produces executables we can run. If not, either
++# the compiler is broken, or we cross compile.
++echo "$as_me:$LINENO: checking whether the C compiler works" >&5
++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
++# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
++# If not cross compiling, check that we can run a simple program.
++if test "$cross_compiling" != yes; then
++ if { ac_try='./$ac_file'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ cross_compiling=no
++ else
++ if test "$cross_compiling" = maybe; then
++ cross_compiling=yes
++ else
++ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot run C compiled programs.
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details." >&2;}
++ { (exit 1); exit 1; }; }
++ fi
++ fi
+ fi
+-rm -fr conftest*
+-ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+-ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
+-
+-echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+-if test $ac_cv_prog_cc_works = no; then
+- { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+-fi
+-echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+-echo "configure:1221: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+-echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+-cross_compiling=$ac_cv_prog_cc_cross
+-
+-echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+-echo "configure:1226: checking whether we are using GNU C" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.c <<EOF
+-#ifdef __GNUC__
+- yes;
+-#endif
+-EOF
+-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+- ac_cv_prog_gcc=yes
++echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
++
++rm -f a.out a.exe conftest$ac_cv_exeext b.out
++ac_clean_files=$ac_clean_files_save
++# Check the compiler produces executables we can run. If not, either
++# the compiler is broken, or we cross compile.
++echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
++echo "$as_me:$LINENO: result: $cross_compiling" >&5
++echo "${ECHO_T}$cross_compiling" >&6
++
++echo "$as_me:$LINENO: checking for suffix of executables" >&5
++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ # If both `conftest.exe' and `conftest' are `present' (well, observable)
++# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
++# work properly (i.e., refer to `conftest.exe'), while it won't with
++# `rm'.
++for ac_file in conftest.exe conftest conftest.*; do
++ test -f "$ac_file" || continue
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
++ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ export ac_cv_exeext
++ break;;
++ * ) break;;
++ esac
++done
+ else
+- ac_cv_prog_gcc=no
+-fi
++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details." >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+-echo "$ac_t""$ac_cv_prog_gcc" 1>&6
++rm -f conftest$ac_cv_exeext
++echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
++echo "${ECHO_T}$ac_cv_exeext" >&6
++
++rm -f conftest.$ac_ext
++EXEEXT=$ac_cv_exeext
++ac_exeext=$EXEEXT
++echo "$as_me:$LINENO: checking for suffix of object files" >&5
++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
++if test "${ac_cv_objext+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++int
++main ()
++{
+
+-if test $ac_cv_prog_gcc = yes; then
+- GCC=yes
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.o conftest.obj
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
++ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
++ case $ac_file in
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
++ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
++ break;;
++ esac
++done
+ else
+- GCC=
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute suffix of object files: cannot compile
++See \`config.log' for more details." >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+
+-ac_test_CFLAGS="${CFLAGS+set}"
+-ac_save_CFLAGS="$CFLAGS"
+-CFLAGS=
+-echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+-echo "configure:1254: checking whether ${CC-cc} accepts -g" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- echo 'void f(){}' > conftest.c
+-if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
++rm -f conftest.$ac_cv_objext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
++echo "${ECHO_T}$ac_cv_objext" >&6
++OBJEXT=$ac_cv_objext
++ac_objext=$OBJEXT
++echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
++if test "${ac_cv_c_compiler_gnu+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++int
++main ()
++{
++#ifndef __GNUC__
++ choke me
++#endif
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_compiler_gnu=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_compiler_gnu=no
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++ac_cv_c_compiler_gnu=$ac_compiler_gnu
++
++fi
++echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
++GCC=`test $ac_compiler_gnu = yes && echo yes`
++ac_test_CFLAGS=${CFLAGS+set}
++ac_save_CFLAGS=$CFLAGS
++CFLAGS="-g"
++echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
++if test "${ac_cv_prog_cc_g+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+ else
+- ac_cv_prog_cc_g=no
+-fi
+-rm -f conftest*
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
++ac_cv_prog_cc_g=no
+ fi
+-
+-echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
++rm -f conftest.$ac_objext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+ if test "$ac_test_CFLAGS" = set; then
+- CFLAGS="$ac_save_CFLAGS"
++ CFLAGS=$ac_save_CFLAGS
+ elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+@@ -1280,295 +2477,548 @@
+ CFLAGS=
+ fi
+ fi
++echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
++echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
++if test "${ac_cv_prog_cc_stdc+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_prog_cc_stdc=no
++ac_save_CC=$CC
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <stdarg.h>
++#include <stdio.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
++struct buf { int x; };
++FILE * (*rcsopen) (struct buf *, struct stat *, int);
++static char *e (p, i)
++ char **p;
++ int i;
++{
++ return p[i];
++}
++static char *f (char * (*g) (char **, int), char **p, ...)
++{
++ char *s;
++ va_list v;
++ va_start (v,p);
++ s = g (p, va_arg (v,int));
++ va_end (v);
++ return s;
++}
++int test (int i, double x);
++struct s1 {int (*f) (int a);};
++struct s2 {int (*f) (double a);};
++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
++int argc;
++char **argv;
++int
++main ()
++{
++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
++ ;
++ return 0;
++}
++_ACEOF
++# Don't try gcc -ansi; that turns off useful extensions and
++# breaks some systems' header files.
++# AIX -qlanglvl=ansi
++# Ultrix and OSF/1 -std1
++# HP-UX 10.20 and later -Ae
++# HP-UX older versions -Aa -D_HPUX_SOURCE
++# SVR4 -Xc -D__EXTENSIONS__
++for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
++do
++ CC="$ac_save_CC $ac_arg"
++ rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_prog_cc_stdc=$ac_arg
++break
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.$ac_objext
++done
++rm -f conftest.$ac_ext conftest.$ac_objext
++CC=$ac_save_CC
+
+-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+-echo "configure:1286: checking how to run the C preprocessor" >&5
+-# On Suns, sometimes $CPP names a directory.
+-if test -n "$CPP" && test -d "$CPP"; then
+- CPP=
+ fi
+-if test -z "$CPP"; then
+-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- # This must be in double quotes, not single quotes, because CPP may get
+- # substituted into the Makefile and "${CC-cc}" will confuse make.
+- CPP="${CC-cc} -E"
+- # On the NeXT, cc -E runs the code through the compiler's parser,
+- # not just through cpp.
+- cat > conftest.$ac_ext <<EOF
+-#line 1301 "configure"
+-#include "confdefs.h"
+-#include <assert.h>
+-Syntax Error
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1307: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
+- :
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- CPP="${CC-cc} -E -traditional-cpp"
+- cat > conftest.$ac_ext <<EOF
+-#line 1318 "configure"
+-#include "confdefs.h"
+-#include <assert.h>
+-Syntax Error
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1324: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
+- :
+-else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- CPP="${CC-cc} -nologo -E"
+- cat > conftest.$ac_ext <<EOF
+-#line 1335 "configure"
+-#include "confdefs.h"
+-#include <assert.h>
+-Syntax Error
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:1341: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
++
++case "x$ac_cv_prog_cc_stdc" in
++ x|xno)
++ echo "$as_me:$LINENO: result: none needed" >&5
++echo "${ECHO_T}none needed" >&6 ;;
++ *)
++ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
++echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
++ CC="$CC $ac_cv_prog_cc_stdc" ;;
++esac
++
++# Some people use a C++ compiler to compile C. Since we use `exit',
++# in C++ we need to declare it. In case someone uses the same compiler
++# for both compiling C and C++ we need to have the C++ compiler decide
++# the declaration of exit, since it's the most demanding environment.
++cat >conftest.$ac_ext <<_ACEOF
++#ifndef __cplusplus
++ choke me
++#endif
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ for ac_declaration in \
++ '' \
++ 'extern "C" void std::exit (int) throw (); using std::exit;' \
++ 'extern "C" void std::exit (int); using std::exit;' \
++ 'extern "C" void exit (int) throw ();' \
++ 'extern "C" void exit (int);' \
++ 'void exit (int);'
++do
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++$ac_declaration
++#include <stdlib.h>
++int
++main ()
++{
++exit (42);
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ :
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- CPP=/lib/cpp
+-fi
+-rm -f conftest*
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++continue
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest.$ac_ext
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++$ac_declaration
++int
++main ()
++{
++exit (42);
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ break
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++done
+ rm -f conftest*
+- ac_cv_prog_CPP="$CPP"
++if test -n "$ac_declaration"; then
++ echo '#ifdef __cplusplus' >>confdefs.h
++ echo $ac_declaration >>confdefs.h
++ echo '#endif' >>confdefs.h
+ fi
+- CPP="$ac_cv_prog_CPP"
++
+ else
+- ac_cv_prog_CPP="$CPP"
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-echo "$ac_t""$CPP" 1>&6
++rm -f conftest.$ac_objext conftest.$ac_ext
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
+
+ missing_dir=`cd $ac_aux_dir && pwd`
+ for ac_prog in flex lex
+ do
+-# Extract the first word of "$ac_prog", so it can be a program name with args.
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1371: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_LEX+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_LEX="$ac_prog"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_LEX="$ac_prog"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
+ fi
+ fi
+-LEX="$ac_cv_prog_LEX"
++LEX=$ac_cv_prog_LEX
+ if test -n "$LEX"; then
+- echo "$ac_t""$LEX" 1>&6
++ echo "$as_me:$LINENO: result: $LEX" >&5
++echo "${ECHO_T}$LEX" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+-test -n "$LEX" && break
++ test -n "$LEX" && break
+ done
+-test -n "$LEX" || LEX=""$missing_dir/missing flex""
++test -n "$LEX" || LEX="$missing_dir/missing flex"
+
+-# Extract the first word of "flex", so it can be a program name with args.
+-set dummy flex; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1404: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++for ac_prog in flex lex
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_LEX+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_LEX="flex"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_LEX="$ac_prog"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
+ fi
+ fi
+-LEX="$ac_cv_prog_LEX"
++LEX=$ac_cv_prog_LEX
+ if test -n "$LEX"; then
+- echo "$ac_t""$LEX" 1>&6
++ echo "$as_me:$LINENO: result: $LEX" >&5
++echo "${ECHO_T}$LEX" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
++ test -n "$LEX" && break
++done
++test -n "$LEX" || LEX=":"
++
+ if test -z "$LEXLIB"
+ then
+- case "$LEX" in
+- flex*) ac_lib=fl ;;
+- *) ac_lib=l ;;
+- esac
+- echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
+-echo "configure:1438: checking for yywrap in -l$ac_lib" >&5
+-ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- ac_save_LIBS="$LIBS"
+-LIBS="-l$ac_lib $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 1446 "configure"
+-#include "confdefs.h"
++ echo "$as_me:$LINENO: checking for yywrap in -lfl" >&5
++echo $ECHO_N "checking for yywrap in -lfl... $ECHO_C" >&6
++if test "${ac_cv_lib_fl_yywrap+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-lfl $LIBS"
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char yywrap();
++ builtin and then its argument prototype would still apply. */
++char yywrap ();
++int
++main ()
++{
++yywrap ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_fl_yywrap=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_fl_yywrap=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_fl_yywrap" >&5
++echo "${ECHO_T}$ac_cv_lib_fl_yywrap" >&6
++if test $ac_cv_lib_fl_yywrap = yes; then
++ LEXLIB="-lfl"
++else
++ echo "$as_me:$LINENO: checking for yywrap in -ll" >&5
++echo $ECHO_N "checking for yywrap in -ll... $ECHO_C" >&6
++if test "${ac_cv_lib_l_yywrap+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ll $LIBS"
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-int main() {
+-yywrap()
+-; return 0; }
+-EOF
+-if { (eval echo configure:1457: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
++/* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
++/* We use char because int might match the return type of a gcc2
++ builtin and then its argument prototype would still apply. */
++char yywrap ();
++int
++main ()
++{
++yywrap ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_l_yywrap=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
++ac_cv_lib_l_yywrap=no
+ fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- LEXLIB="-l$ac_lib"
+-else
+- echo "$ac_t""no" 1>&6
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_l_yywrap" >&5
++echo "${ECHO_T}$ac_cv_lib_l_yywrap" >&6
++if test $ac_cv_lib_l_yywrap = yes; then
++ LEXLIB="-ll"
++fi
++
+ fi
+
+ fi
+
+-echo $ac_n "checking lex output file root""... $ac_c" 1>&6
+-echo "configure:1480: checking lex output file root" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test "x$LEX" != "x:"; then
++ echo "$as_me:$LINENO: checking lex output file root" >&5
++echo $ECHO_N "checking lex output file root... $ECHO_C" >&6
++if test "${ac_cv_prog_lex_root+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # The minimal lex program is just a single line: %%. But some broken lexes
+ # (Solaris, I think it was) want two %% lines, so accommodate them.
+-echo '%%
+-%%' | $LEX
++cat >conftest.l <<_ACEOF
++%%
++%%
++_ACEOF
++{ (eval echo "$as_me:$LINENO: \"$LEX conftest.l\"") >&5
++ (eval $LEX conftest.l) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }
+ if test -f lex.yy.c; then
+ ac_cv_prog_lex_root=lex.yy
+ elif test -f lexyy.c; then
+ ac_cv_prog_lex_root=lexyy
+ else
+- { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; }
++ { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5
++echo "$as_me: error: cannot find output from $LEX; giving up" >&2;}
++ { (exit 1); exit 1; }; }
+ fi
+ fi
+-
+-echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
++echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5
++echo "${ECHO_T}$ac_cv_prog_lex_root" >&6
++rm -f conftest.l
+ LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+-echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
+-echo "configure:1501: checking whether yytext is a pointer" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5
++echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6
++if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # POSIX says lex can declare yytext either as a pointer or an array; the
+ # default is implementation-dependent. Figure out which it is, since
+ # not all implementations provide the %pointer and %array declarations.
+ ac_cv_prog_lex_yytext_pointer=no
+ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
+-ac_save_LIBS="$LIBS"
++ac_save_LIBS=$LIBS
+ LIBS="$LIBS $LEXLIB"
+-cat > conftest.$ac_ext <<EOF
+-#line 1513 "configure"
+-#include "confdefs.h"
++cat >conftest.$ac_ext <<_ACEOF
+ `cat $LEX_OUTPUT_ROOT.c`
+-int main() {
+-
+-; return 0; }
+-EOF
+-if { (eval echo configure:1520: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ ac_cv_prog_lex_yytext_pointer=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_save_LIBS
+ rm -f "${LEX_OUTPUT_ROOT}.c"
+
+ fi
+-
+-echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6
++echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5
++echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6
+ if test $ac_cv_prog_lex_yytext_pointer = yes; then
+- cat >> confdefs.h <<\EOF
++
++cat >>confdefs.h <<\_ACEOF
+ #define YYTEXT_POINTER 1
+-EOF
++_ACEOF
++
++fi
+
+ fi
+
+ for ac_prog in 'bison -y' byacc
+ do
+-# Extract the first word of "$ac_prog", so it can be a program name with args.
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
+ set dummy $ac_prog; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:1546: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_YACC+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_YACC="$ac_prog"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_YACC="$ac_prog"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
+ fi
+ fi
+-YACC="$ac_cv_prog_YACC"
++YACC=$ac_cv_prog_YACC
+ if test -n "$YACC"; then
+- echo "$ac_t""$YACC" 1>&6
++ echo "$as_me:$LINENO: result: $YACC" >&5
++echo "${ECHO_T}$YACC" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+-test -n "$YACC" && break
++ test -n "$YACC" && break
+ done
+ test -n "$YACC" || YACC="yacc"
+
+@@ -1579,126 +3029,77 @@
+ # SunOS /usr/etc/install
+ # IRIX /sbin/install
+ # AIX /bin/install
++# AmigaOS /C/install, which installs bootblocks on floppy discs
+ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+ # ./install, which can be erroneously created by make from ./install.sh.
+-echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+-echo "configure:1588: checking for a BSD compatible install" >&5
++echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+ if test -z "$INSTALL"; then
+-if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test "${ac_cv_path_install+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+- for ac_dir in $PATH; do
+- # Account for people who put trailing slashes in PATH elements.
+- case "$ac_dir/" in
+- /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+- *)
+- # OSF1 and SCO ODT 3.0 have their own names for install.
+- # Don't use installbsd from OSF since it installs stuff as root
+- # by default.
+- for ac_prog in ginstall scoinst install; do
+- if test -f $ac_dir/$ac_prog; then
+- if test $ac_prog = install &&
+- grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+- # AIX install. It has an incompatible calling convention.
+- :
+- else
+- ac_cv_path_install="$ac_dir/$ac_prog -c"
+- break 2
+- fi
+- fi
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ # Account for people who put trailing slashes in PATH elements.
++case $as_dir/ in
++ ./ | .// | /cC/* | \
++ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++ /usr/ucb/* ) ;;
++ *)
++ # OSF1 and SCO ODT 3.0 have their own names for install.
++ # Don't use installbsd from OSF since it installs stuff as root
++ # by default.
++ for ac_prog in ginstall scoinst install; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
++ if test $ac_prog = install &&
++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # AIX install. It has an incompatible calling convention.
++ :
++ elif test $ac_prog = install &&
++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
++ else
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
++ fi
++ fi
+ done
+- ;;
+- esac
+- done
+- IFS="$ac_save_IFS"
++ done
++ ;;
++esac
++done
++
+
+ fi
+ if test "${ac_cv_path_install+set}" = set; then
+- INSTALL="$ac_cv_path_install"
++ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+- INSTALL="$ac_install_sh"
++ INSTALL=$ac_install_sh
+ fi
+ fi
+-echo "$ac_t""$INSTALL" 1>&6
++echo "$as_me:$LINENO: result: $INSTALL" >&5
++echo "${ECHO_T}$INSTALL" >&6
+
+ # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+ # It thinks the first close brace ends the variable substitution.
+ test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
++test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+-echo "configure:1642: checking for Cygwin environment" >&5
+-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1647 "configure"
+-#include "confdefs.h"
+-
+-int main() {
+-
+-#ifndef __CYGWIN__
+-#define __CYGWIN__ __CYGWIN32__
+-#endif
+-return __CYGWIN__;
+-; return 0; }
+-EOF
+-if { (eval echo configure:1658: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
+- ac_cv_cygwin=yes
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- ac_cv_cygwin=no
+-fi
+-rm -f conftest*
+-rm -f conftest*
+-fi
+-
+-echo "$ac_t""$ac_cv_cygwin" 1>&6
+-CYGWIN=
+-test "$ac_cv_cygwin" = yes && CYGWIN=yes
+-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+-echo "configure:1675: checking for mingw32 environment" >&5
+-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 1680 "configure"
+-#include "confdefs.h"
+-
+-int main() {
+-return __MINGW32__;
+-; return 0; }
+-EOF
+-if { (eval echo configure:1687: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
+- ac_cv_mingw32=yes
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- ac_cv_mingw32=no
+-fi
+-rm -f conftest*
+-rm -f conftest*
+-fi
+-
+-echo "$ac_t""$ac_cv_mingw32" 1>&6
+-MINGW32=
+-test "$ac_cv_mingw32" = yes && MINGW32=yes
+ # Check whether --enable-shared or --disable-shared was given.
+ if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+@@ -1720,8 +3121,7 @@
+ esac
+ else
+ enable_shared=yes
+-fi
+-
++fi;
+ # Check whether --enable-static or --disable-static was given.
+ if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+@@ -1743,8 +3143,7 @@
+ esac
+ else
+ enable_static=yes
+-fi
+-
++fi;
+ # Check whether --enable-fast-install or --disable-fast-install was given.
+ if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+@@ -1766,21 +3165,31 @@
+ esac
+ else
+ enable_fast_install=yes
++fi;
++# Find the correct PATH separator. Usually this is `:', but
++# DJGPP uses `;' like DOS.
++if test "X${PATH_SEPARATOR+set}" != Xset; then
++ UNAME=${UNAME-`uname 2>/dev/null`}
++ case X$UNAME in
++ *-DOS) lt_cv_sys_path_separator=';' ;;
++ *) lt_cv_sys_path_separator=':' ;;
++ esac
++ PATH_SEPARATOR=$lt_cv_sys_path_separator
+ fi
+
++
+ # Check whether --with-gnu-ld or --without-gnu-ld was given.
+ if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+ else
+ with_gnu_ld=no
+-fi
+-
++fi;
+ ac_prog=ld
+ if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+- echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
+-echo "configure:1784: checking for ld used by GCC" >&5
++ echo "$as_me:$LINENO: checking for ld used by GCC" >&5
++echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+@@ -1809,17 +3218,17 @@
+ ;;
+ esac
+ elif test "$with_gnu_ld" = yes; then
+- echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
+-echo "configure:1814: checking for GNU ld" >&5
++ echo "$as_me:$LINENO: checking for GNU ld" >&5
++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+ else
+- echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
+-echo "configure:1817: checking for non-GNU ld" >&5
++ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+ fi
+-if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test "${lt_cv_path_LD+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -z "$LD"; then
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+@@ -1842,15 +3251,19 @@
+
+ LD="$lt_cv_path_LD"
+ if test -n "$LD"; then
+- echo "$ac_t""$LD" 1>&6
++ echo "$as_me:$LINENO: result: $LD" >&5
++echo "${ECHO_T}$LD" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+-test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
+-echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
+-echo "configure:1852: checking if the linker ($LD) is GNU ld" >&5
+-if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
++ { (exit 1); exit 1; }; }
++echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
++if test "${lt_cv_prog_gnu_ld+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+ if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
+@@ -1859,33 +3272,33 @@
+ lt_cv_prog_gnu_ld=no
+ fi
+ fi
+-
+-echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
++echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+ with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+-echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+-echo "configure:1869: checking for $LD option to reload object files" >&5
+-if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
++if test "${lt_cv_ld_reload_flag+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_ld_reload_flag='-r'
+ fi
+-
+-echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
++echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+ reload_flag=$lt_cv_ld_reload_flag
+ test -n "$reload_flag" && reload_flag=" $reload_flag"
+
+-echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
+-echo "configure:1881: checking for BSD-compatible nm" >&5
+-if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
++echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
++if test "${lt_cv_path_NM+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+@@ -1912,33 +3325,109 @@
+ fi
+
+ NM="$lt_cv_path_NM"
+-echo "$ac_t""$NM" 1>&6
++echo "$as_me:$LINENO: result: $NM" >&5
++echo "${ECHO_T}$NM" >&6
++
++echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
++if test "${lt_cv_path_SED+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ # Loop through the user's path and test for sed and gsed.
++# Then use that list of sed's as ones to test for truncation.
++as_executable_p="test -f"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_prog in sed gsed; do
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
++ _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext"
++ fi
++ done
++ done
++done
++
++ # Create a temporary directory, and hook for its removal unless debugging.
++$debug ||
++{
++ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
++ trap '{ (exit 1); exit 1; }' 1 2 13 15
++}
++
++# Create a (secure) tmp directory for tmp files.
++: ${TMPDIR=/tmp}
++{
++ tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` &&
++ test -n "$tmp" && test -d "$tmp"
++} ||
++{
++ tmp=$TMPDIR/sed$$-$RANDOM
++ (umask 077 && mkdir $tmp)
++} ||
++{
++ echo "$me: cannot create a temporary directory in $TMPDIR" >&2
++ { (exit 1); exit 1; }
++}
++ _max=0
++ _count=0
++ # Add /usr/xpg4/bin/sed as it is typically found on Solaris
++ # along with /bin/sed that truncates output.
++ for _sed in $_sed_list /usr/xpg4/bin/sed; do
++ test ! -f ${_sed} && break
++ cat /dev/null > "$tmp/sed.in"
++ _count=0
++ echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in"
++ # Check for GNU sed and select it if it is found.
++ if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then
++ lt_cv_path_SED=${_sed}
++ break
++ fi
++ while true; do
++ cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp"
++ mv "$tmp/sed.tmp" "$tmp/sed.in"
++ cp "$tmp/sed.in" "$tmp/sed.nl"
++ echo >>"$tmp/sed.nl"
++ ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break
++ cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break
++ # 40000 chars as input seems more than enough
++ test $_count -gt 10 && break
++ _count=`expr $_count + 1`
++ if test $_count -gt $_max; then
++ _max=$_count
++ lt_cv_path_SED=$_sed
++ fi
++ done
++ done
++ rm -rf "$tmp"
+
+-echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
+-echo "configure:1919: checking whether ln -s works" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- rm -f conftestdata
+-if ln -s X conftestdata 2>/dev/null
+-then
+- rm -f conftestdata
+- ac_cv_prog_LN_S="ln -s"
+-else
+- ac_cv_prog_LN_S=ln
+ fi
++
++if test "X$SED" != "X"; then
++ lt_cv_path_SED=$SED
++else
++ SED=$lt_cv_path_SED
+ fi
+-LN_S="$ac_cv_prog_LN_S"
+-if test "$ac_cv_prog_LN_S" = "ln -s"; then
+- echo "$ac_t""yes" 1>&6
++echo "$as_me:$LINENO: result: $SED" >&5
++echo "${ECHO_T}$SED" >&6
++
++echo "$as_me:$LINENO: checking whether ln -s works" >&5
++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
++LN_S=$as_ln_s
++if test "$LN_S" = "ln -s"; then
++ echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
++echo "${ECHO_T}no, using $LN_S" >&6
+ fi
+
+-echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+-echo "configure:1940: checking how to recognise dependant libraries" >&5
+-if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
++echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
++if test "${lt_cv_deplibs_check_method+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+ lt_cv_file_magic_test_file=
+@@ -1949,7 +3438,7 @@
+ # `unknown' -- same as none, but documents that we really don't know.
+ # 'pass_all' -- all dependencies passed with no checks.
+ # 'test_compile' -- check by making test program.
+-# ['file_magic [regex]'] -- check by looking for files in library path
++# 'file_magic [[regex]]' -- check by looking for files in library path
+ # which responds to the $file_magic_cmd with a given egrep regex.
+ # If you have `file' or equivalent on your system and you're not sure
+ # whether `pass_all' will *always* work, you probably want this one.
+@@ -1978,7 +3467,7 @@
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+- rhapsody* | darwin1.012)
++ rhapsody* | darwin1.[012])
+ lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1`
+ ;;
+ *) # Darwin 1.3 on
+@@ -2013,9 +3502,9 @@
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+-irix5* | irix6*)
++irix5* | irix6* | nonstopux*)
+ case $host_os in
+- irix5*)
++ irix5* | nonstopux*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+@@ -2037,7 +3526,7 @@
+ # This must be Linux ELF.
+ linux-gnu*)
+ case $host_cpu in
+- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* | s390* )
++ alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | arm* | m68k)
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+@@ -2060,6 +3549,16 @@
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
++openbsd*)
++ lt_cv_file_magic_cmd=/usr/bin/file
++ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
++ else
++ lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
++ fi
++ ;;
++
+ osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+@@ -2098,89 +3597,32 @@
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
++ siemens)
++ lt_cv_deplibs_check_method=pass_all
++ ;;
+ esac
+ ;;
+ esac
+
+ fi
+-
+-echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
++echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+ file_magic_cmd=$lt_cv_file_magic_cmd
+ deplibs_check_method=$lt_cv_deplibs_check_method
+
+-echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+-echo "configure:2113: checking for object suffix" >&5
+-if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- rm -f conftest*
+-echo 'int i = 1;' > conftest.$ac_ext
+-if { (eval echo configure:2119: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- for ac_file in conftest.*; do
+- case $ac_file in
+- *.c) ;;
+- *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+- esac
+- done
+-else
+- { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+-fi
+-rm -f conftest*
+-fi
+-
+-echo "$ac_t""$ac_cv_objext" 1>&6
+-OBJEXT=$ac_cv_objext
+-ac_objext=$ac_cv_objext
+-
+-
+-
+-echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+-echo "configure:2139: checking for executable suffix" >&5
+-if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+- ac_cv_exeext=.exe
+-else
+- rm -f conftest*
+- echo 'int main () { return 0; }' > conftest.$ac_ext
+- ac_cv_exeext=
+- if { (eval echo configure:2149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+- for file in conftest.*; do
+- case $file in
+- *.c | *.o | *.obj) ;;
+- *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+- esac
+- done
+- else
+- { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+- fi
+- rm -f conftest*
+- test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+-fi
+-fi
+
+-EXEEXT=""
+-test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+-echo "$ac_t""${ac_cv_exeext}" 1>&6
+-ac_exeext=$EXEEXT
+
+-if test $host != $build; then
+- ac_tool_prefix=${host_alias}-
+-else
+- ac_tool_prefix=
+-fi
+
+
+
+
+ # Check for command to grab the raw symbol name followed by C symbol from nm.
+-echo $ac_n "checking command to parse $NM output""... $ac_c" 1>&6
+-echo "configure:2180: checking command to parse $NM output" >&5
+-if eval "test \"`echo '$''{'lt_cv_sys_global_symbol_pipe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking command to parse $NM output" >&5
++echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6
++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-
++
+ # These are sane defaults that work on at least a few old systems.
+ # [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+@@ -2196,6 +3638,9 @@
+ # Transform an extracted symbol line into a proper C declaration
+ lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
+
++# Transform an extracted symbol line into symbol name and symbol address
++lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
++
+ # Define system-specific variables.
+ case $host_os in
+ aix*)
+@@ -2206,10 +3651,14 @@
+ ;;
+ hpux*) # Its linker distinguishes data from code symbols
+ lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
++ lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+ ;;
+-irix*)
++irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
++osf*)
++ symcode='[BCDEGQRST]'
++ ;;
+ solaris* | sysv5*)
+ symcode='[BDT]'
+ ;;
+@@ -2252,10 +3701,18 @@
+ int main(){nm_test_var='a';nm_test_func();return(0);}
+ EOF
+
+- if { (eval echo configure:2256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+- if { (eval echo configure:2259: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\") 1>&5; (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5; } && test -s "$nlist"; then
++ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
++ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+@@ -2277,23 +3734,23 @@
+
+ cat <<EOF >> conftest.$ac_ext
+ #if defined (__STDC__) && __STDC__
+-# define lt_ptr_t void *
++# define lt_ptr void *
+ #else
+-# define lt_ptr_t char *
++# define lt_ptr char *
+ # define const
+ #endif
+
+ /* The mapping between symbol names and symbols. */
+ const struct {
+ const char *name;
+- lt_ptr_t address;
++ lt_ptr address;
+ }
+ lt_preloaded_symbols[] =
+ {
+ EOF
+- sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext
++ sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext
+ cat <<\EOF >> conftest.$ac_ext
+- {0, (lt_ptr_t) 0}
++ {0, (lt_ptr) 0}
+ };
+
+ #ifdef __cplusplus
+@@ -2306,7 +3763,11 @@
+ save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$no_builtin_flag"
+- if { (eval echo configure:2310: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && test -s conftest$ac_exeext; then
+ pipe_works=yes
+ fi
+ LIBS="$save_LIBS"
+@@ -2339,84 +3800,665 @@
+ global_symbol_pipe="$lt_cv_sys_global_symbol_pipe"
+ if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ global_symbol_to_cdecl=
++ global_symbol_to_c_name_address=
+ else
+ global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl"
++ global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address"
+ fi
+-if test -z "$global_symbol_pipe$global_symbol_to_cdecl"; then
+- echo "$ac_t""failed" 1>&6
++if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address";
++then
++ echo "$as_me:$LINENO: result: failed" >&5
++echo "${ECHO_T}failed" >&6
+ else
+- echo "$ac_t""ok" 1>&6
++ echo "$as_me:$LINENO: result: ok" >&5
++echo "${ECHO_T}ok" >&6
+ fi
+
+-for ac_hdr in dlfcn.h
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
++# On Suns, sometimes $CPP names a directory.
++if test -n "$CPP" && test -d "$CPP"; then
++ CPP=
++fi
++if test -z "$CPP"; then
++ if test "${ac_cv_prog_CPP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ # Double quotes because CPP needs to be expanded
++ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
++ do
++ ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
+ do
+-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+-echo "configure:2356: checking for $ac_hdr" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ # Use a header file that comes with gcc, so configuring glibc
++ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
++ # On the NeXT, cc -E runs the code through the compiler's parser,
++ # not just through cpp. "Syntax error" is here to catch this case.
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 2361 "configure"
+-#include "confdefs.h"
+-#include <$ac_hdr>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:2366: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
++ ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++ :
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ # Broken: fails on valid input.
++continue
+ fi
+-rm -f conftest*
++rm -f conftest.err conftest.$ac_ext
++
++ # OK, works on sane cases. Now check whether non-existent headers
++ # can be detected and how.
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <ac_nonexistent.h>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
++else
++ ac_cpp_err=yes
+ fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_hdr 1
+-EOF
+-
++if test -z "$ac_cpp_err"; then
++ # Broken: success on invalid input.
++continue
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ # Passes both tests.
++ac_preproc_ok=:
++break
+ fi
++rm -f conftest.err conftest.$ac_ext
++
+ done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then
++ break
++fi
+
++ done
++ ac_cv_prog_CPP=$CPP
++
++fi
++ CPP=$ac_cv_prog_CPP
++else
++ ac_cv_prog_CPP=$CPP
++fi
++echo "$as_me:$LINENO: result: $CPP" >&5
++echo "${ECHO_T}$CPP" >&6
++ac_preproc_ok=false
++for ac_c_preproc_warn_flag in '' yes
++do
++ # Use a header file that comes with gcc, so configuring glibc
++ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
++ # On the NeXT, cc -E runs the code through the compiler's parser,
++ # not just through cpp. "Syntax error" is here to catch this case.
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
++else
++ ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++ :
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
++ # Broken: fails on valid input.
++continue
++fi
++rm -f conftest.err conftest.$ac_ext
+
++ # OK, works on sane cases. Now check whether non-existent headers
++ # can be detected and how.
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <ac_nonexistent.h>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
++else
++ ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++ # Broken: success on invalid input.
++continue
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
++ # Passes both tests.
++ac_preproc_ok=:
++break
++fi
++rm -f conftest.err conftest.$ac_ext
+
+-# Only perform the check for file, if the check method requires it
+-case $deplibs_check_method in
+-file_magic*)
+- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+- echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+-echo "configure:2401: checking for ${ac_tool_prefix}file" >&5
+-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++done
++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
++rm -f conftest.err conftest.$ac_ext
++if $ac_preproc_ok; then
++ :
+ else
+- case $MAGIC_CMD in
+- /*)
+- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+- ;;
+- ?:/*)
+- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+- ;;
+- *)
+- ac_save_MAGIC_CMD="$MAGIC_CMD"
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="/usr/bin:$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/${ac_tool_prefix}file; then
+- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+- if test -n "$file_magic_test_file"; then
++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details." >&5
++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details." >&2;}
++ { (exit 1); exit 1; }; }
++fi
++
++ac_ext=c
++ac_cpp='$CPP $CPPFLAGS'
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++
++echo "$as_me:$LINENO: checking for egrep" >&5
++echo $ECHO_N "checking for egrep... $ECHO_C" >&6
++if test "${ac_cv_prog_egrep+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
++ then ac_cv_prog_egrep='grep -E'
++ else ac_cv_prog_egrep='egrep'
++ fi
++fi
++echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
++echo "${ECHO_T}$ac_cv_prog_egrep" >&6
++ EGREP=$ac_cv_prog_egrep
++
++
++echo "$as_me:$LINENO: checking for ANSI C header files" >&5
++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
++if test "${ac_cv_header_stdc+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <stdlib.h>
++#include <stdarg.h>
++#include <string.h>
++#include <float.h>
++
++int
++main ()
++{
++
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_header_stdc=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_header_stdc=no
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++
++if test $ac_cv_header_stdc = yes; then
++ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <string.h>
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++ $EGREP "memchr" >/dev/null 2>&1; then
++ :
++else
++ ac_cv_header_stdc=no
++fi
++rm -f conftest*
++
++fi
++
++if test $ac_cv_header_stdc = yes; then
++ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <stdlib.h>
++
++_ACEOF
++if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
++ $EGREP "free" >/dev/null 2>&1; then
++ :
++else
++ ac_cv_header_stdc=no
++fi
++rm -f conftest*
++
++fi
++
++if test $ac_cv_header_stdc = yes; then
++ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
++ if test "$cross_compiling" = yes; then
++ :
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <ctype.h>
++#if ((' ' & 0x0FF) == 0x020)
++# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
++# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
++#else
++# define ISLOWER(c) \
++ (('a' <= (c) && (c) <= 'i') \
++ || ('j' <= (c) && (c) <= 'r') \
++ || ('s' <= (c) && (c) <= 'z'))
++# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
++#endif
++
++#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
++int
++main ()
++{
++ int i;
++ for (i = 0; i < 256; i++)
++ if (XOR (islower (i), ISLOWER (i))
++ || toupper (i) != TOUPPER (i))
++ exit(2);
++ exit (0);
++}
++_ACEOF
++rm -f conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ :
++else
++ echo "$as_me: program exited with status $ac_status" >&5
++echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++( exit $ac_status )
++ac_cv_header_stdc=no
++fi
++rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++fi
++fi
++fi
++echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
++echo "${ECHO_T}$ac_cv_header_stdc" >&6
++if test $ac_cv_header_stdc = yes; then
++
++cat >>confdefs.h <<\_ACEOF
++#define STDC_HEADERS 1
++_ACEOF
++
++fi
++
++# On IRIX 5.3, sys/types and inttypes.h are conflicting.
++
++
++
++
++
++
++
++
++
++for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
++ inttypes.h stdint.h unistd.h
++do
++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
++echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++$ac_includes_default
++
++#include <$ac_header>
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ eval "$as_ac_Header=yes"
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++eval "$as_ac_Header=no"
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
++if test `eval echo '${'$as_ac_Header'}'` = yes; then
++ cat >>confdefs.h <<_ACEOF
++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
++fi
++
++done
++
++
++
++for ac_header in dlfcn.h
++do
++as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++ echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++fi
++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
++else
++ # Is the header compilable?
++echo "$as_me:$LINENO: checking $ac_header usability" >&5
++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++$ac_includes_default
++#include <$ac_header>
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_header_compiler=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_header_compiler=no
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
++echo "${ECHO_T}$ac_header_compiler" >&6
++
++# Is the header present?
++echo "$as_me:$LINENO: checking $ac_header presence" >&5
++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <$ac_header>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
++else
++ ac_cpp_err=yes
++fi
++if test -z "$ac_cpp_err"; then
++ ac_header_preproc=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_header_preproc=no
++fi
++rm -f conftest.err conftest.$ac_ext
++echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
++echo "${ECHO_T}$ac_header_preproc" >&6
++
++# So? What about this header?
++case $ac_header_compiler:$ac_header_preproc in
++ yes:no )
++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
++ (
++ cat <<\_ASBOX
++## ------------------------------------ ##
++## Report this to bug-autoconf@gnu.org. ##
++## ------------------------------------ ##
++_ASBOX
++ ) |
++ sed "s/^/$as_me: WARNING: /" >&2
++ ;;
++ no:yes )
++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
++ (
++ cat <<\_ASBOX
++## ------------------------------------ ##
++## Report this to bug-autoconf@gnu.org. ##
++## ------------------------------------ ##
++_ASBOX
++ ) |
++ sed "s/^/$as_me: WARNING: /" >&2
++ ;;
++esac
++echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ eval "$as_ac_Header=$ac_header_preproc"
++fi
++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
++
++fi
++if test `eval echo '${'$as_ac_Header'}'` = yes; then
++ cat >>confdefs.h <<_ACEOF
++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
++fi
++
++done
++
++
++
++
++
++
++# Only perform the check for file, if the check method requires it
++case $deplibs_check_method in
++file_magic*)
++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
++ echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ case $MAGIC_CMD in
++ /*)
++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
++ ;;
++ ?:/*)
++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
++ ;;
++ *)
++ ac_save_MAGIC_CMD="$MAGIC_CMD"
++ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
++ ac_dummy="/usr/bin:$PATH"
++ for ac_dir in $ac_dummy; do
++ test -z "$ac_dir" && ac_dir=.
++ if test -f $ac_dir/${ac_tool_prefix}file; then
++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
++ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+@@ -2451,17 +4493,19 @@
+
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+- echo "$ac_t""$MAGIC_CMD" 1>&6
++ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
++echo "${ECHO_T}$MAGIC_CMD" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+ if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+- echo $ac_n "checking for file""... $ac_c" 1>&6
+-echo "configure:2463: checking for file" >&5
+-if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking for file" >&5
++echo $ECHO_N "checking for file... $ECHO_C" >&6
++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ case $MAGIC_CMD in
+ /*)
+@@ -2513,9 +4557,11 @@
+
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if test -n "$MAGIC_CMD"; then
+- echo "$ac_t""$MAGIC_CMD" 1>&6
++ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
++echo "${ECHO_T}$MAGIC_CMD" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+ else
+@@ -2527,138 +4573,164 @@
+ ;;
+ esac
+
+-# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:2534: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_RANLIB+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
+ fi
+ fi
+-RANLIB="$ac_cv_prog_RANLIB"
++RANLIB=$ac_cv_prog_RANLIB
+ if test -n "$RANLIB"; then
+- echo "$ac_t""$RANLIB" 1>&6
++ echo "$as_me:$LINENO: result: $RANLIB" >&5
++echo "${ECHO_T}$RANLIB" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+-
++fi
+ if test -z "$ac_cv_prog_RANLIB"; then
+-if test -n "$ac_tool_prefix"; then
++ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+ set dummy ranlib; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:2566: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- if test -n "$RANLIB"; then
+- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
++ if test -n "$ac_ct_RANLIB"; then
++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_RANLIB="ranlib"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_RANLIB="ranlib"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+ fi
+ fi
+-RANLIB="$ac_cv_prog_RANLIB"
+-if test -n "$RANLIB"; then
+- echo "$ac_t""$RANLIB" 1>&6
++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
++if test -n "$ac_ct_RANLIB"; then
++ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
++echo "${ECHO_T}$ac_ct_RANLIB" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
++ RANLIB=$ac_ct_RANLIB
+ else
+- RANLIB=":"
+-fi
++ RANLIB="$ac_cv_prog_RANLIB"
+ fi
+
+-# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
++if test -n "$ac_tool_prefix"; then
++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+ set dummy ${ac_tool_prefix}strip; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:2601: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_STRIP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
+ fi
+ fi
+-STRIP="$ac_cv_prog_STRIP"
++STRIP=$ac_cv_prog_STRIP
+ if test -n "$STRIP"; then
+- echo "$ac_t""$STRIP" 1>&6
++ echo "$as_me:$LINENO: result: $STRIP" >&5
++echo "${ECHO_T}$STRIP" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+-
++fi
+ if test -z "$ac_cv_prog_STRIP"; then
+-if test -n "$ac_tool_prefix"; then
++ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+ set dummy strip; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:2633: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- if test -n "$STRIP"; then
+- ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
++ if test -n "$ac_ct_STRIP"; then
++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+ else
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_prog_STRIP="strip"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
+- test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_prog_ac_ct_STRIP="strip"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+ fi
+ fi
+-STRIP="$ac_cv_prog_STRIP"
+-if test -n "$STRIP"; then
+- echo "$ac_t""$STRIP" 1>&6
++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
++if test -n "$ac_ct_STRIP"; then
++ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
++echo "${ECHO_T}$ac_ct_STRIP" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
++ STRIP=$ac_ct_STRIP
+ else
+- STRIP=":"
+-fi
++ STRIP="$ac_cv_prog_STRIP"
+ fi
+
+
+@@ -2668,9 +4740,8 @@
+ # Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+ if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+- :
+-fi
+
++fi;
+ test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+ # Some flags need to be propagated to the compiler or linker for good
+@@ -2678,8 +4749,12 @@
+ case $host in
+ *-*-irix6*)
+ # Find out which ABI we are using.
+- echo '#line 2682 "configure"' > conftest.$ac_ext
+- if { (eval echo configure:2683: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
++ echo '#line 4752 "configure"' > conftest.$ac_ext
++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+@@ -2699,47 +4774,64 @@
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+- echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
+-echo "configure:2704: checking whether the C compiler needs -belf" >&5
+-if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
++if test "${lt_cv_cc_needs_belf+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-
++
++
+ ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
++
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+- cat > conftest.$ac_ext <<EOF
+-#line 2717 "configure"
+-#include "confdefs.h"
+-
+-int main() {
++int
++main ()
++{
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:2724: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ lt_cv_cc_needs_belf=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- lt_cv_cc_needs_belf=no
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++lt_cv_cc_needs_belf=no
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+-# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ ac_cpp='$CPP $CPPFLAGS'
+-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+-ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+-cross_compiling=$ac_cv_prog_cc_cross
++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
++ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ fi
+-
+-echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
++echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+@@ -2824,16 +4916,23 @@
+ old_postuninstall_cmds=
+
+ if test -n "$RANLIB"; then
++ case $host_os in
++ openbsd*)
++ old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
++ ;;
++ *)
++ old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
++ ;;
++ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+ fi
+
+ # Allow CC to be a program name with arguments.
+ set dummy $CC
+ compiler="$2"
+
+-echo $ac_n "checking for objdir""... $ac_c" 1>&6
+-echo "configure:2837: checking for objdir" >&5
++echo "$as_me:$LINENO: checking for objdir" >&5
++echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+ rm -f .libs 2>/dev/null
+ mkdir .libs 2>/dev/null
+ if test -d .libs; then
+@@ -2843,7 +4942,9 @@
+ objdir=_libs
+ fi
+ rmdir .libs 2>/dev/null
+-echo "$ac_t""$objdir" 1>&6
++echo "$as_me:$LINENO: result: $objdir" >&5
++echo "${ECHO_T}$objdir" >&6
++
+
+
+ # Check whether --with-pic or --without-pic was given.
+@@ -2852,17 +4953,16 @@
+ pic_mode="$withval"
+ else
+ pic_mode=default
+-fi
+-
++fi;
+ test -z "$pic_mode" && pic_mode=default
+
+ # We assume here that the value for lt_cv_prog_cc_pic will not be cached
+ # in isolation, and that seeing it set (from the cache) indicates that
+ # the associated values are set (in the cache) correctly too.
+-echo $ac_n "checking for $compiler option to produce PIC""... $ac_c" 1>&6
+-echo "configure:2864: checking for $compiler option to produce PIC" >&5
+-if eval "test \"`echo '$''{'lt_cv_prog_cc_pic'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
++if test "${lt_cv_prog_cc_pic+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_cc_pic=
+ lt_cv_prog_cc_shlib=
+@@ -2882,7 +4982,7 @@
+ # libC (AIX C++ library), which obviously doesn't included in libraries
+ # list by gcc. This cause undefined symbols with -static flags.
+ # This hack allows C programs to be linked with "-static -ldl", but
+- # we not sure about C++ programs.
++ # not sure about C++ programs.
+ lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC"
+ ;;
+ amigaos*)
+@@ -2891,7 +4991,7 @@
+ # like `-m68040'.
+ lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+- beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
++ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ darwin* | rhapsody*)
+@@ -2917,13 +5017,13 @@
+ # PORTME Check for PIC flags for the system compiler.
+ case $host_os in
+ aix3* | aix4* | aix5*)
++ lt_cv_prog_cc_wl='-Wl,'
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+- # AIX 5 now supports IA64 processor
+- lt_cv_prog_cc_static='-Bstatic'
+- lt_cv_prog_cc_wl='-Wl,'
++ # AIX 5 now supports IA64 processor
++ lt_cv_prog_cc_static='-Bstatic'
+ else
+- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
++ lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+@@ -2934,7 +5034,7 @@
+ lt_cv_prog_cc_pic='+Z'
+ ;;
+
+- irix5* | irix6*)
++ irix5* | irix6* | nonstopux*)
+ lt_cv_prog_cc_wl='-Wl,'
+ lt_cv_prog_cc_static='-non_shared'
+ # PIC (with -KPIC) is the default.
+@@ -2978,11 +5078,7 @@
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ lt_cv_prog_cc_pic='-KPIC'
+ lt_cv_prog_cc_static='-Bstatic'
+- if test "x$host_vendor" = xsni; then
+- lt_cv_prog_cc_wl='-LD'
+- else
+- lt_cv_prog_cc_wl='-Wl,'
+- fi
++ lt_cv_prog_cc_wl='-Wl,'
+ ;;
+
+ uts4*)
+@@ -3006,28 +5102,48 @@
+ fi
+
+ if test -z "$lt_cv_prog_cc_pic"; then
+- echo "$ac_t""none" 1>&6
++ echo "$as_me:$LINENO: result: none" >&5
++echo "${ECHO_T}none" >&6
+ else
+- echo "$ac_t""$lt_cv_prog_cc_pic" 1>&6
++ echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5
++echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6
+
+ # Check to make sure the pic_flag actually works.
+- echo $ac_n "checking if $compiler PIC flag $lt_cv_prog_cc_pic works""... $ac_c" 1>&6
+-echo "configure:3016: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
+- if eval "test \"`echo '$''{'lt_cv_prog_cc_pic_works'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5
++echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6
++ if test "${lt_cv_prog_cc_pic_works+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
+- cat > conftest.$ac_ext <<EOF
+-#line 3023 "configure"
+-#include "confdefs.h"
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-int main() {
++int
++main ()
++{
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:3030: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ case $host_os in
+ hpux9* | hpux10* | hpux11*)
+ # On HP-UX, both CC and GCC only warn that PIC is supported... then
+@@ -3043,17 +5159,17 @@
+ lt_cv_prog_cc_pic_works=yes
+ ;;
+ esac
+-
++
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- lt_cv_prog_cc_pic_works=no
+-
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ lt_cv_prog_cc_pic_works=no
++
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$save_CFLAGS"
+-
++
+ fi
+
+
+@@ -3064,43 +5180,65 @@
+ lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic"
+ fi
+
+- echo "$ac_t""$lt_cv_prog_cc_pic_works" 1>&6
++ echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5
++echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6
+ fi
+
+ # Check for any special shared library compilation flags.
+ if test -n "$lt_cv_prog_cc_shlib"; then
+- echo "configure: warning: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" 1>&2
++ { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5
++echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;}
+ if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then :
+ else
+- echo "configure: warning: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" 1>&2
++ { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
++echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
+ lt_cv_prog_cc_can_build_shared=no
+ fi
+ fi
+
+-echo $ac_n "checking if $compiler static flag $lt_cv_prog_cc_static works""... $ac_c" 1>&6
+-echo "configure:3082: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
+-if eval "test \"`echo '$''{'lt_cv_prog_cc_static_works'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5
++echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6
++if test "${lt_cv_prog_cc_static_works+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ lt_cv_prog_cc_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
+- cat > conftest.$ac_ext <<EOF
+-#line 3090 "configure"
+-#include "confdefs.h"
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-int main() {
++int
++main ()
++{
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:3097: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ lt_cv_prog_cc_static_works=yes
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+@@ -3108,7 +5246,8 @@
+
+ # Belt *and* braces to stop my trousers falling down:
+ test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static=
+-echo "$ac_t""$lt_cv_prog_cc_static_works" 1>&6
++echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5
++echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6
+
+ pic_flag="$lt_cv_prog_cc_pic"
+ special_shlib_compile_flags="$lt_cv_prog_cc_shlib"
+@@ -3119,12 +5258,12 @@
+
+
+ # Check to see if options -o and -c are simultaneously supported by compiler
+-echo $ac_n "checking if $compiler supports -c -o file.$ac_objext""... $ac_c" 1>&6
+-echo "configure:3124: checking if $compiler supports -c -o file.$ac_objext" >&5
+-if eval "test \"`echo '$''{'lt_cv_compiler_c_o'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
++if test "${lt_cv_compiler_c_o+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-
++
+ $rm -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+@@ -3139,7 +5278,7 @@
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
+ compiler_c_o=no
+-if { (eval echo configure:3143: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
++if { (eval echo configure:5281: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s out/conftest.err; then
+@@ -3163,29 +5302,50 @@
+ fi
+
+ compiler_c_o=$lt_cv_compiler_c_o
+-echo "$ac_t""$compiler_c_o" 1>&6
++echo "$as_me:$LINENO: result: $compiler_c_o" >&5
++echo "${ECHO_T}$compiler_c_o" >&6
+
+ if test x"$compiler_c_o" = x"yes"; then
+ # Check to see if we can write to a .lo
+- echo $ac_n "checking if $compiler supports -c -o file.lo""... $ac_c" 1>&6
+-echo "configure:3172: checking if $compiler supports -c -o file.lo" >&5
+- if eval "test \"`echo '$''{'lt_cv_compiler_o_lo'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5
++echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6
++ if test "${lt_cv_compiler_o_lo+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+-
++
+ lt_cv_compiler_o_lo=no
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -c -o conftest.lo"
+- cat > conftest.$ac_ext <<EOF
+-#line 3181 "configure"
+-#include "confdefs.h"
++ save_objext="$ac_objext"
++ ac_objext=lo
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-int main() {
++int
++main ()
++{
+ int some_variable = 0;
+-; return 0; }
+-EOF
+-if { (eval echo configure:3188: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+@@ -3193,18 +5353,21 @@
+ else
+ lt_cv_compiler_o_lo=yes
+ fi
+-
++
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest.$ac_ext
++ ac_objext="$save_objext"
+ CFLAGS="$save_CFLAGS"
+-
++
+ fi
+
+ compiler_o_lo=$lt_cv_compiler_o_lo
+- echo "$ac_t""$compiler_o_lo" 1>&6
++ echo "$as_me:$LINENO: result: $compiler_o_lo" >&5
++echo "${ECHO_T}$compiler_o_lo" >&6
+ else
+ compiler_o_lo=no
+ fi
+@@ -3213,17 +5376,19 @@
+ hard_links="nottested"
+ if test "$compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+- echo $ac_n "checking if we can lock with hard links""... $ac_c" 1>&6
+-echo "configure:3218: checking if we can lock with hard links" >&5
++ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+- echo "$ac_t""$hard_links" 1>&6
++ echo "$as_me:$LINENO: result: $hard_links" >&5
++echo "${ECHO_T}$hard_links" >&6
+ if test "$hard_links" = no; then
+- echo "configure: warning: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" 1>&2
++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+ else
+@@ -3232,22 +5397,40 @@
+
+ if test "$GCC" = yes; then
+ # Check to see if options -fno-rtti -fno-exceptions are supported by compiler
+- echo $ac_n "checking if $compiler supports -fno-rtti -fno-exceptions""... $ac_c" 1>&6
+-echo "configure:3237: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+ compiler_rtti_exceptions=no
+- cat > conftest.$ac_ext <<EOF
+-#line 3243 "configure"
+-#include "confdefs.h"
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-int main() {
++int
++main ()
++{
+ int some_variable = 0;
+-; return 0; }
+-EOF
+-if { (eval echo configure:3250: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+- rm -rf conftest*
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+@@ -3255,14 +5438,16 @@
+ else
+ compiler_rtti_exceptions=yes
+ fi
+-
++
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest*
++rm -f conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$save_CFLAGS"
+- echo "$ac_t""$compiler_rtti_exceptions" 1>&6
++ echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5
++echo "${ECHO_T}$compiler_rtti_exceptions" >&6
+
+ if test "$compiler_rtti_exceptions" = "yes"; then
+ no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions'
+@@ -3272,8 +5457,8 @@
+ fi
+
+ # See if the linker supports building shared libraries.
+-echo $ac_n "checking whether the linker ($LD) supports shared libraries""... $ac_c" 1>&6
+-echo "configure:3277: checking whether the linker ($LD) supports shared libraries" >&5
++echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5
++echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+ allow_undefined_flag=
+ no_undefined_flag=
+@@ -3314,7 +5499,7 @@
+ extract_expsyms_cmds=
+
+ case $host_os in
+-cygwin* | mingw* | pw32* )
++cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+@@ -3322,7 +5507,9 @@
+ with_gnu_ld=no
+ fi
+ ;;
+-
++openbsd*)
++ with_gnu_ld=no
++ ;;
+ esac
+
+ ld_shlibs=yes
+@@ -3409,7 +5596,7 @@
+ # can override, but on older systems we have to supply one (in ltdll.c)
+ if test "x$lt_cv_need_dllmain" = "xyes"; then
+ ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext "
+- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < [$]0 > $output_objdir/$soname-ltdll.c~
++ ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~
+ test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~'
+ else
+ ltdll_obj=
+@@ -3427,19 +5614,20 @@
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is.
+ # If DATA tags from a recent dlltool are present, honour them!
+- archive_expsym_cmds='if test "x`head -1 $export_symbols`" = xEXPORTS; then
+- cp $export_symbols $output_objdir/$soname-def;
++ archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then
++ cp $export_symbols $output_objdir/$soname-def;
+ else
+- echo EXPORTS > $output_objdir/$soname-def;
+- _lt_hint=1;
+- cat $export_symbols | while read symbol; do
+- set dummy \$symbol;
+- case \$# in
+- 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
+- *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
+- esac;
+- _lt_hint=`expr 1 + \$_lt_hint`;
+- done;
++ echo EXPORTS > $output_objdir/$soname-def;
++ _lt_hint=1;
++ cat $export_symbols | while read symbol; do
++ set dummy \$symbol;
++ case \$# in
++ 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;;
++ 4) echo " \$2 \$3 \$4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;;
++ *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;;
++ esac;
++ _lt_hint=`expr 1 + \$_lt_hint`;
++ done;
+ fi~
+ '"$ltdll_cmds"'
+ $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~
+@@ -3534,80 +5722,98 @@
+ ;;
+
+ aix4* | aix5*)
++ if test "$host_cpu" = ia64; then
++ # On IA64, the linker does run time linking by default, so we don't
++ # have to do anything special.
++ aix_use_runtimelinking=no
++ exp_sym_flag='-Bexport'
++ no_entry_flag=""
++ else
++ aix_use_runtimelinking=no
++
++ # Test if we are trying to use run time linking or normal
++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
++ # need to do runtime linking.
++ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
++ for ld_flag in $LDFLAGS; do
++ case $ld_flag in
++ *-brtl*)
++ aix_use_runtimelinking=yes
++ break
++ ;;
++ esac
++ done
++ esac
++
++ exp_sym_flag='-bexport'
++ no_entry_flag='-bnoentry'
++ fi
++
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
++ hardcode_direct=yes
+ archive_cmds=''
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+- collect2name=`${CC} -print-prog-name=collect2`
+- if test -f "$collect2name" && \
+- strings "$collect2name" | grep resolve_lib_name >/dev/null
+- then
+- # We have reworked collect2
+- hardcode_direct=yes
+- else
+- # We have old collect2
+- hardcode_direct=unsupported
+- # It fails to find uninstalled libraries when the uninstalled
+- # path is not listed in the libpath. Setting hardcode_minus_L
+- # to unsupported forces relinking
+- hardcode_minus_L=yes
+- hardcode_libdir_flag_spec='-L$libdir'
+- hardcode_libdir_separator=
+- fi
+- shared_flag='-shared'
+- else
++ case $host_os in aix4.[012]|aix4.[012].*)
++ collect2name=`${CC} -print-prog-name=collect2`
++ if test -f "$collect2name" && \
++ strings "$collect2name" | grep resolve_lib_name >/dev/null
++ then
++ # We have reworked collect2
++ hardcode_direct=yes
++ else
++ # We have old collect2
++ hardcode_direct=unsupported
++ # It fails to find uninstalled libraries when the uninstalled
++ # path is not listed in the libpath. Setting hardcode_minus_L
++ # to unsupported forces relinking
++ hardcode_minus_L=yes
++ hardcode_libdir_flag_spec='-L$libdir'
++ hardcode_libdir_separator=
++ fi
++ esac
++
++ shared_flag='-shared'
++ else
++ # not using gcc
+ if test "$host_cpu" = ia64; then
+- shared_flag='-G'
++ shared_flag='${wl}-G'
+ else
+- shared_flag='${wl}-bM:SRE'
++ if test "$aix_use_runtimelinking" = yes; then
++ shared_flag='${wl}-G'
++ else
++ shared_flag='${wl}-bM:SRE'
++ fi
+ fi
+- hardcode_direct=yes
+ fi
+
+- if test "$host_cpu" = ia64; then
+- # On IA64, the linker does run time linking by default, so we don't
+- # have to do anything special.
+- aix_use_runtimelinking=no
+- exp_sym_flag='-Bexport'
+- no_entry_flag=""
+- else
+- # Test if we are trying to use run time linking, or normal AIX style linking.
+- # If -brtl is somewhere in LDFLAGS, we need to do run time linking.
+- aix_use_runtimelinking=no
+- for ld_flag in $LDFLAGS; do
+- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl" ); then
+- aix_use_runtimelinking=yes
+- break
+- fi
+- done
+- exp_sym_flag='-bexport'
+- no_entry_flag='-bnoentry'
+- fi
+ # It seems that -bexpall can do strange things, so it is better to
+ # generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
++ # Warning - without using the other runtime loading flags (-brtl),
++ # -berok will link without error, but may produce a broken library.
++ allow_undefined_flag='-berok'
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib'
+- allow_undefined_flag=' -Wl,-G'
+- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
++ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+- allow_undefined_flag="-znodefs"
+- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
++ allow_undefined_flag="-z nodefs"
++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+ else
+- hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
+- # Warning - without using the other run time loading flags, -berok will
+- # link without error, but may produce a broken library.
+- allow_undefined_flag='${wl}-berok'
+- # This is a bit strange, but is similar to how AIX traditionally builds
+- # it's shared libraries.
+- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $objdir/$libname$release.a $objdir/$soname'
++ hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib'
++ # Warning - without using the other run time loading flags,
++ # -berok will link without error, but may produce a broken library.
++ allow_undefined_flag='${wl}-berok'
++ # This is a bit strange, but is similar to how AIX traditionally builds
++ # it's shared libraries.
++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+@@ -3639,11 +5845,19 @@
+ ;;
+
+ darwin* | rhapsody*)
+- allow_undefined_flag='-undefined suppress'
++ case "$host_os" in
++ rhapsody* | darwin1.[012])
++ allow_undefined_flag='-undefined suppress'
++ ;;
++ *) # Darwin 1.3 on
++ allow_undefined_flag='-flat_namespace -undefined suppress'
++ ;;
++ esac
+ # FIXME: Relying on posixy $() will cause problems for
+ # cross-compilation, but unfortunately the echo tests do not
+- # yet detect zsh echo's removal of \ escapes.
+- archive_cmds='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)'
++ # yet detect zsh echo's removal of \ escapes. Also zsh mangles
++ # `"' quotes if we put them in here... so don't!
++ archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)'
+ # We need to add '_' to the symbols in $export_symbols first
+ #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols'
+ hardcode_direct=yes
+@@ -3695,13 +5909,14 @@
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+- irix5* | irix6*)
++ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
++ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ link_all_deplibs=yes
+ ;;
+@@ -3718,7 +5933,7 @@
+ ;;
+
+ newsos6)
+- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+@@ -3726,10 +5941,24 @@
+ ;;
+
+ openbsd*)
+- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+- hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ export_dynamic_flag_spec='${wl}-E'
++ else
++ case "$host_os" in
++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_libdir_flag_spec='-R$libdir'
++ ;;
++ *)
++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
++ ;;
++ esac
++ fi
+ ;;
+
+ os2*)
+@@ -3774,10 +6003,39 @@
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
++ export_dynamic_flag_spec='${wl}-Bexport'
+ ;;
+
+ solaris*)
++ # gcc --version < 3.0 without binutils cannot create self contained
++ # shared libraries reliably, requiring libgcc.a to resolve some of
++ # the object symbols generated in some cases. Libraries that use
++ # assert need libgcc.a to resolve __eprintf, for example. Linking
++ # a copy of libgcc.a into every shared library to guarantee resolving
++ # such symbols causes other problems: According to Tim Van Holder
++ # <tim.van.holder@pandora.be>, C++ libraries end up with a separate
++ # (to the application) exception stack for one thing.
+ no_undefined_flag=' -z defs'
++ if test "$GCC" = yes; then
++ case `$CC --version 2>/dev/null` in
++ [12].*)
++ cat <<EOF 1>&2
++
++*** Warning: Releases of GCC earlier than version 3.0 cannot reliably
++*** create self contained shared libraries on Solaris systems, without
++*** introducing a dependency on libgcc.a. Therefore, libtool is disabling
++*** -no-undefined support, which will at least allow you to build shared
++*** libraries. However, you may find that when you link such libraries
++*** into an application without using GCC, you have to manually add
++*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to
++*** upgrade to a newer version of GCC. Another option is to rebuild your
++*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer.
++
++EOF
++ no_undefined_flag=
++ ;;
++ esac
++ fi
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+@@ -3808,13 +6066,23 @@
+ ;;
+
+ sysv4)
+- if test "x$host_vendor" = xsno; then
+- archive_cmds='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts'
+- hardcode_direct=yes # is this really true???
+- else
+- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+- hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+- fi
++ case $host_vendor in
++ sni)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_direct=yes # is this really true???
++ ;;
++ siemens)
++ ## LD is ld it makes a PLAMLIB
++ ## CC just makes a GrossModule.
++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
++ reload_cmds='$CC -r -o $output$reload_objs'
++ hardcode_direct=no
++ ;;
++ motorola)
++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
++ ;;
++ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+@@ -3884,12 +6152,13 @@
+ ;;
+ esac
+ fi
+-echo "$ac_t""$ld_shlibs" 1>&6
++echo "$as_me:$LINENO: result: $ld_shlibs" >&5
++echo "${ECHO_T}$ld_shlibs" >&6
+ test "$ld_shlibs" = no && can_build_shared=no
+
+ # Check hardcoding attributes.
+-echo $ac_n "checking how to hardcode library paths into programs""... $ac_c" 1>&6
+-echo "configure:3893: checking how to hardcode library paths into programs" >&5
++echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+ hardcode_action=
+ if test -n "$hardcode_libdir_flag_spec" || \
+ test -n "$runpath_var"; then
+@@ -3912,26 +6181,29 @@
+ # directories.
+ hardcode_action=unsupported
+ fi
+-echo "$ac_t""$hardcode_action" 1>&6
++echo "$as_me:$LINENO: result: $hardcode_action" >&5
++echo "${ECHO_T}$hardcode_action" >&6
+
+ striplib=
+ old_striplib=
+-echo $ac_n "checking whether stripping libraries is possible""... $ac_c" 1>&6
+-echo "configure:3921: checking whether stripping libraries is possible" >&5
++echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+ if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+- echo "$ac_t""yes" 1>&6
++ echo "$as_me:$LINENO: result: yes" >&5
++echo "${ECHO_T}yes" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+ # PORTME Fill in your ld.so characteristics
+-echo $ac_n "checking dynamic linker characteristics""... $ac_c" 1>&6
+-echo "configure:3935: checking dynamic linker characteristics" >&5
++echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+ library_names_spec=
+ libname_spec='lib$name'
+ soname_spec=
+@@ -3958,6 +6230,9 @@
+
+ aix4* | aix5*)
+ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so'
+@@ -3969,22 +6244,24 @@
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+- aix4 | aix4.[01] | aix4.[01].*)
+- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+- echo ' yes '
+- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+- :
+- else
+- can_build_shared=no
+- fi
+- ;;
++ aix4 | aix4.[01] | aix4.[01].*)
++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
++ echo ' yes '
++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
++ :
++ else
++ can_build_shared=no
++ fi
++ ;;
+ esac
+- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+- # soname into executable. Probably we can add versioning support to
+- # collect2, so additional links can be useful in future.
++ # AIX (on Power*) has no versioning support, so currently we can
++ # not hardcode correct soname into executable. Probably we can
++ # add versioning support to collect2, so additional links can
++ # be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+- # If using run time linking (on AIX 4.2 or later) use lib<name>.so instead of
+- # lib<name>.a to let people know that these are not typical AIX shared libraries.
++ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
++ # instead of lib<name>.a to let people know that these are not
++ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+@@ -3993,8 +6270,8 @@
+ soname_spec='${libname}${release}.so$major'
+ fi
+ shlibpath_var=LIBPATH
+- deplibs_check_method=pass_all
+ fi
++ hardcode_into_libs=yes
+ ;;
+
+ amigaos*)
+@@ -4042,7 +6319,7 @@
+ ;;
+ yes,mingw*)
+ library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll'
+- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g"`
++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"`
+ ;;
+ yes,pw32*)
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll'
+@@ -4074,6 +6351,18 @@
+ dynamic_linker=no
+ ;;
+
++freebsd*-gnu*)
++ version_type=linux
++ need_lib_prefix=no
++ need_version=no
++ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
++ soname_spec='${libname}${release}.so$major'
++ shlibpath_var=LD_LIBRARY_PATH
++ shlibpath_overrides_runpath=no
++ hardcode_into_libs=yes
++ dynamic_linker='GNU/FreeBSD ld.so'
++ ;;
++
+ freebsd*)
+ objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+ version_type=freebsd-$objformat
+@@ -4125,14 +6414,17 @@
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+-irix5* | irix6*)
+- version_type=irix
++irix5* | irix6* | nonstopux*)
++ case $host_os in
++ nonstopux*) version_type=nonstopux ;;
++ *) version_type=irix ;;
++ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}.so$major'
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so'
+ case $host_os in
+- irix5*)
++ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+@@ -4206,9 +6498,19 @@
+
+ openbsd*)
+ version_type=sunos
+- if test "$with_gnu_ld" = yes; then
+- need_lib_prefix=no
+- need_version=no
++ need_lib_prefix=no
++ need_version=no
++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
++ case "$host_os" in
++ openbsd2.[89] | openbsd2.[89].*)
++ shlibpath_overrides_runpath=no
++ ;;
++ *)
++ shlibpath_overrides_runpath=yes
++ ;;
++ esac
++ else
++ shlibpath_overrides_runpath=yes
+ fi
+ library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+@@ -4226,11 +6528,13 @@
+ osf3* | osf4* | osf5*)
+ version_type=osf
+ need_version=no
+- soname_spec='${libname}${release}.so'
+- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so'
++ need_lib_prefix=no
++ soname_spec='${libname}${release}.so$major'
++ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
++ hardcode_into_libs=yes
+ ;;
+
+ sco3.2v5*)
+@@ -4273,6 +6577,12 @@
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
++ need_lib_prefix=no
++ export_dynamic_flag_spec='${wl}-Blargedynsym'
++ runpath_var=LD_RUN_PATH
++ ;;
++ siemens)
++ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+@@ -4312,13 +6622,46 @@
+ dynamic_linker=no
+ ;;
+ esac
+-echo "$ac_t""$dynamic_linker" 1>&6
++echo "$as_me:$LINENO: result: $dynamic_linker" >&5
++echo "${ECHO_T}$dynamic_linker" >&6
+ test "$dynamic_linker" = no && can_build_shared=no
+
+ # Report the final consequences.
+-echo $ac_n "checking if libtool supports shared libraries""... $ac_c" 1>&6
+-echo "configure:4321: checking if libtool supports shared libraries" >&5
+-echo "$ac_t""$can_build_shared" 1>&6
++echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
++echo "$as_me:$LINENO: result: $can_build_shared" >&5
++echo "${ECHO_T}$can_build_shared" >&6
++
++echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
++test "$can_build_shared" = "no" && enable_shared=no
++
++# On AIX, shared libraries and static libraries use the same namespace, and
++# are all built from PIC.
++case "$host_os" in
++aix3*)
++ test "$enable_shared" = yes && enable_static=no
++ if test -n "$RANLIB"; then
++ archive_cmds="$archive_cmds~\$RANLIB \$lib"
++ postinstall_cmds='$RANLIB $lib'
++ fi
++ ;;
++
++aix4*)
++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
++ test "$enable_shared" = yes && enable_static=no
++ fi
++ ;;
++esac
++echo "$as_me:$LINENO: result: $enable_shared" >&5
++echo "${ECHO_T}$enable_shared" >&6
++
++echo "$as_me:$LINENO: checking whether to build static libraries" >&5
++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
++# Make sure either enable_shared or enable_static is yes.
++test "$enable_shared" = yes || enable_static=yes
++echo "$as_me:$LINENO: result: $enable_static" >&5
++echo "${ECHO_T}$enable_static" >&6
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+@@ -4355,224 +6698,398 @@
+ ;;
+
+ *)
+- echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+-echo "configure:4360: checking for dlopen in -ldl" >&5
+-ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- ac_save_LIBS="$LIBS"
+-LIBS="-ldl $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 4368 "configure"
+-#include "confdefs.h"
+-/* Override any gcc2 internal prototype to avoid an error. */
+-/* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char dlopen();
+-
+-int main() {
+-dlopen()
+-; return 0; }
+-EOF
+-if { (eval echo configure:4379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+-
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+-else
+- echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for dlopen""... $ac_c" 1>&6
+-echo "configure:4398: checking for dlopen" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 4403 "configure"
+-#include "confdefs.h"
++ echo "$as_me:$LINENO: checking for shl_load" >&5
++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
++if test "${ac_cv_func_shl_load+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ /* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char dlopen(); below. */
+-#include <assert.h>
++ which can conflict with char shl_load (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++{
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char dlopen();
+-
+-int main() {
+-
++ builtin and then its argument prototype would still apply. */
++char shl_load ();
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+-#if defined (__stub_dlopen) || defined (__stub___dlopen)
++#if defined (__stub_shl_load) || defined (__stub___shl_load)
+ choke me
+ #else
+-dlopen();
++char (*f) () = shl_load;
++#endif
++#ifdef __cplusplus
++}
+ #endif
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:4426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_func_dlopen=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_dlopen=no"
+-fi
+-rm -f conftest*
+-fi
+-
+-if eval "test \"`echo '$ac_cv_func_'dlopen`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- lt_cv_dlopen="dlopen"
++int
++main ()
++{
++return f != shl_load;
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_func_shl_load=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_func_shl_load=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
++echo "${ECHO_T}$ac_cv_func_shl_load" >&6
++if test $ac_cv_func_shl_load = yes; then
++ lt_cv_dlopen="shl_load"
+ else
+- echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for shl_load""... $ac_c" 1>&6
+-echo "configure:4444: checking for shl_load" >&5
+-if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
++if test "${ac_cv_lib_dld_shl_load+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 4449 "configure"
+-#include "confdefs.h"
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldld $LIBS"
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
++/* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
++/* We use char because int might match the return type of a gcc2
++ builtin and then its argument prototype would still apply. */
++char shl_load ();
++int
++main ()
++{
++shl_load ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_dld_shl_load=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_dld_shl_load=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
++if test $ac_cv_lib_dld_shl_load = yes; then
++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
++else
++ echo "$as_me:$LINENO: checking for dlopen" >&5
++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
++if test "${ac_cv_func_dlopen+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ /* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char shl_load(); below. */
+-#include <assert.h>
++ which can conflict with char dlopen (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++{
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char shl_load();
+-
+-int main() {
+-
++ builtin and then its argument prototype would still apply. */
++char dlopen ();
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+-#if defined (__stub_shl_load) || defined (__stub___shl_load)
++#if defined (__stub_dlopen) || defined (__stub___dlopen)
+ choke me
+ #else
+-shl_load();
++char (*f) () = dlopen;
++#endif
++#ifdef __cplusplus
++}
+ #endif
+
+-; return 0; }
+-EOF
+-if { (eval echo configure:4472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_func_shl_load=yes"
++int
++main ()
++{
++return f != dlopen;
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_func_dlopen=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_func_dlopen=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++fi
++echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
++echo "${ECHO_T}$ac_cv_func_dlopen" >&6
++if test $ac_cv_func_dlopen = yes; then
++ lt_cv_dlopen="dlopen"
+ else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_func_shl_load=no"
+-fi
+-rm -f conftest*
+-fi
++ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
++if test "${ac_cv_lib_dl_dlopen+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_check_lib_save_LIBS=$LIBS
++LIBS="-ldl $LIBS"
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-if eval "test \"`echo '$ac_cv_func_'shl_load`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- lt_cv_dlopen="shl_load"
++/* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
++/* We use char because int might match the return type of a gcc2
++ builtin and then its argument prototype would still apply. */
++char dlopen ();
++int
++main ()
++{
++dlopen ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_dl_dlopen=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_dl_dlopen=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
++if test $ac_cv_lib_dl_dlopen = yes; then
++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ else
+- echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for dlopen in -lsvld""... $ac_c" 1>&6
+-echo "configure:4490: checking for dlopen in -lsvld" >&5
+-ac_lib_var=`echo svld'_'dlopen | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
++if test "${ac_cv_lib_svld_dlopen+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lsvld $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 4498 "configure"
+-#include "confdefs.h"
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char dlopen();
+-
+-int main() {
+-dlopen()
+-; return 0; }
+-EOF
+-if { (eval echo configure:4509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+-
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++ builtin and then its argument prototype would still apply. */
++char dlopen ();
++int
++main ()
++{
++dlopen ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_svld_dlopen=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_svld_dlopen=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
++if test $ac_cv_lib_svld_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+ else
+- echo "$ac_t""no" 1>&6
+-echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
+-echo "configure:4528: checking for shl_load in -ldld" >&5
+-ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
++if test "${ac_cv_lib_dld_dld_link+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-ldld $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 4536 "configure"
+-#include "confdefs.h"
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++
+ /* Override any gcc2 internal prototype to avoid an error. */
++#ifdef __cplusplus
++extern "C"
++#endif
+ /* We use char because int might match the return type of a gcc2
+- builtin and then its argument prototype would still apply. */
+-char shl_load();
+-
+-int main() {
+-shl_load()
+-; return 0; }
+-EOF
+-if { (eval echo configure:4547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
++ builtin and then its argument prototype would still apply. */
++char dld_link ();
++int
++main ()
++{
++dld_link ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_dld_dld_link=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_dld_dld_link=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
++if test $ac_cv_lib_dld_dld_link = yes; then
++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+ fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+-else
+- echo "$ac_t""no" 1>&6
++
+ fi
+
+-
++
+ fi
+
+-
++
+ fi
+
+-
++
+ fi
+
+-
++
+ fi
+
+ ;;
+@@ -4595,10 +7112,10 @@
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+- echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
+-echo "configure:4600: checking whether a program can dlopen itself" >&5
+-if eval "test \"`echo '$''{'lt_cv_dlopen_self'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
++if test "${lt_cv_dlopen_self+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+@@ -4606,7 +7123,7 @@
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+-#line 4610 "configure"
++#line 7126 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -4667,7 +7184,11 @@
+ exit (status);
+ }
+ EOF
+- if { (eval echo configure:4671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+@@ -4682,17 +7203,17 @@
+ fi
+ rm -fr conftest*
+
+-
+-fi
+
+-echo "$ac_t""$lt_cv_dlopen_self" 1>&6
++fi
++echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
++echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ LDFLAGS="$LDFLAGS $link_static_flag"
+- echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
+-echo "configure:4694: checking whether a statically linked program can dlopen itself" >&5
+-if eval "test \"`echo '$''{'lt_cv_dlopen_self_static'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
++if test "${lt_cv_dlopen_self_static+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+@@ -4700,7 +7221,7 @@
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+-#line 4704 "configure"
++#line 7224 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -4761,7 +7282,11 @@
+ exit (status);
+ }
+ EOF
+- if { (eval echo configure:4765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} 2>/dev/null; then
++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+@@ -4776,10 +7301,10 @@
+ fi
+ rm -fr conftest*
+
+-
+-fi
+
+-echo "$ac_t""$lt_cv_dlopen_self_static" 1>&6
++fi
++echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+@@ -4809,15 +7334,19 @@
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+- echo $ac_n "checking whether -lc should be explicitly linked in""... $ac_c" 1>&6
+-echo "configure:4814: checking whether -lc should be explicitly linked in" >&5
+- if eval "test \"`echo '$''{'lt_cv_archive_cmds_need_lc'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
++ if test "${lt_cv_archive_cmds_need_lc+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ $rm conftest*
+ echo 'static int dummy;' > conftest.$ac_ext
+
+- if { (eval echo configure:4821: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+@@ -4830,7 +7359,11 @@
+ libname=conftest
+ save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+- if { (eval echo configure:4834: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\") 1>&5; (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5; }
++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
++ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+@@ -4842,7 +7375,8 @@
+ fi
+ fi
+
+- echo "$ac_t""$lt_cv_archive_cmds_need_lc" 1>&6
++ echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5
++echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6
+ ;;
+ esac
+ fi
+@@ -4870,7 +7404,7 @@
+ # Now quote all the things that may contain metacharacters while being
+ # careful not to overquote the AC_SUBSTed values. We take copies of the
+ # variables and quote the copies for generation of the libtool script.
+- for var in echo old_CC old_CFLAGS \
++ for var in echo old_CC old_CFLAGS SED \
+ AR AR_FLAGS CC LD LN_S NM SHELL \
+ reload_flag reload_cmds wl \
+ pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \
+@@ -4882,6 +7416,7 @@
+ old_striplib striplib file_magic_cmd export_symbols_cmds \
+ deplibs_check_method allow_undefined_flag no_undefined_flag \
+ finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \
++ global_symbol_to_c_name_address \
+ hardcode_libdir_flag_spec hardcode_libdir_separator \
+ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+ compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do
+@@ -4931,8 +7466,11 @@
+ # configuration script generated by Autoconf, you may include it under
+ # the same distribution terms that you use for the rest of that program.
+
++# A sed that does not truncate output.
++SED=$lt_SED
++
+ # Sed that helps us avoid accidentally triggering echo(1) options like -n.
+-Xsed="sed -e s/^X//"
++Xsed="${SED} -e s/^X//"
+
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+ # if CDPATH is set.
+@@ -4948,12 +7486,12 @@
+ # Whether or not to build shared libraries.
+ build_libtool_libs=$enable_shared
+
+-# Whether or not to add -lc for building shared libraries.
+-build_libtool_need_lc=$need_lc
+-
+ # Whether or not to build static libraries.
+ build_old_libs=$enable_static
+
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=$need_lc
++
+ # Whether or not to optimize for fast installation.
+ fast_install=$enable_fast_install
+
+@@ -5119,6 +7657,9 @@
+ # Transform the output of nm in a proper C declaration
+ global_symbol_to_cdecl=$lt_global_symbol_to_cdecl
+
++# Transform the output of nm in a C name address pair
++global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address
++
+ # This is the shared library runtime path variable.
+ runpath_var=$runpath_var
+
+@@ -5241,9 +7782,9 @@
+ # return TRUE;
+ # }
+ # /* ltdll.c ends here */
+- # This is a source program that is used to create import libraries
+- # on Windows for dlls which lack them. Don't remove nor modify the
+- # starting and closing comments
++ # This is a source program that is used to create import libraries
++ # on Windows for dlls which lack them. Don't remove nor modify the
++ # starting and closing comments
+ # /* impgen.c starts here */
+ # /* Copyright (C) 1999-2000 Free Software Foundation, Inc.
+ #
+@@ -5411,156 +7952,386 @@
+
+ # Extract the first word of "perl", so it can be a program name with args.
+ set dummy perl; ac_word=$2
+-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+-echo "configure:5416: checking for $ac_word" >&5
+-if eval "test \"`echo '$''{'ac_cv_path_PERL'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_path_PERL+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- case "$PERL" in
+- /*)
++ case $PERL in
++ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PERL="$PERL" # Let the user override the test with a path.
+ ;;
+- ?:/*)
+- ac_cv_path_PERL="$PERL" # Let the user override the test with a dos path.
+- ;;
+ *)
+- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+- ac_dummy="$PATH"
+- for ac_dir in $ac_dummy; do
+- test -z "$ac_dir" && ac_dir=.
+- if test -f $ac_dir/$ac_word; then
+- ac_cv_path_PERL="$ac_dir/$ac_word"
+- break
+- fi
+- done
+- IFS="$ac_save_ifs"
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
+ ;;
+ esac
+ fi
+-PERL="$ac_cv_path_PERL"
++PERL=$ac_cv_path_PERL
++
+ if test -n "$PERL"; then
+- echo "$ac_t""$PERL" 1>&6
++ echo "$as_me:$LINENO: result: $PERL" >&5
++echo "${ECHO_T}$PERL" >&6
+ else
+- echo "$ac_t""no" 1>&6
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
+ fi
+
+
+
+
+-ac_safe=`echo "asm/errno.h" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for asm/errno.h""... $ac_c" 1>&6
+-echo "configure:5453: checking for asm/errno.h" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++if test "${ac_cv_header_asm_errno_h+set}" = set; then
++ echo "$as_me:$LINENO: checking for asm/errno.h" >&5
++echo $ECHO_N "checking for asm/errno.h... $ECHO_C" >&6
++if test "${ac_cv_header_asm_errno_h+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++fi
++echo "$as_me:$LINENO: result: $ac_cv_header_asm_errno_h" >&5
++echo "${ECHO_T}$ac_cv_header_asm_errno_h" >&6
+ else
+- cat > conftest.$ac_ext <<EOF
+-#line 5458 "configure"
+-#include "confdefs.h"
++ # Is the header compilable?
++echo "$as_me:$LINENO: checking asm/errno.h usability" >&5
++echo $ECHO_N "checking asm/errno.h usability... $ECHO_C" >&6
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++$ac_includes_default
+ #include <asm/errno.h>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:5463: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_header_compiler=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_header_compiler=no
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
++echo "${ECHO_T}$ac_header_compiler" >&6
++
++# Is the header present?
++echo "$as_me:$LINENO: checking asm/errno.h presence" >&5
++echo $ECHO_N "checking asm/errno.h presence... $ECHO_C" >&6
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <asm/errno.h>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
++ ac_cpp_err=yes
+ fi
+-rm -f conftest*
++if test -z "$ac_cpp_err"; then
++ ac_header_preproc=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_header_preproc=no
++fi
++rm -f conftest.err conftest.$ac_ext
++echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
++echo "${ECHO_T}$ac_header_preproc" >&6
++
++# So? What about this header?
++case $ac_header_compiler:$ac_header_preproc in
++ yes:no )
++ { echo "$as_me:$LINENO: WARNING: asm/errno.h: accepted by the compiler, rejected by the preprocessor!" >&5
++echo "$as_me: WARNING: asm/errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
++ { echo "$as_me:$LINENO: WARNING: asm/errno.h: proceeding with the preprocessor's result" >&5
++echo "$as_me: WARNING: asm/errno.h: proceeding with the preprocessor's result" >&2;}
++ (
++ cat <<\_ASBOX
++## ------------------------------------ ##
++## Report this to bug-autoconf@gnu.org. ##
++## ------------------------------------ ##
++_ASBOX
++ ) |
++ sed "s/^/$as_me: WARNING: /" >&2
++ ;;
++ no:yes )
++ { echo "$as_me:$LINENO: WARNING: asm/errno.h: present but cannot be compiled" >&5
++echo "$as_me: WARNING: asm/errno.h: present but cannot be compiled" >&2;}
++ { echo "$as_me:$LINENO: WARNING: asm/errno.h: check for missing prerequisite headers?" >&5
++echo "$as_me: WARNING: asm/errno.h: check for missing prerequisite headers?" >&2;}
++ { echo "$as_me:$LINENO: WARNING: asm/errno.h: proceeding with the preprocessor's result" >&5
++echo "$as_me: WARNING: asm/errno.h: proceeding with the preprocessor's result" >&2;}
++ (
++ cat <<\_ASBOX
++## ------------------------------------ ##
++## Report this to bug-autoconf@gnu.org. ##
++## ------------------------------------ ##
++_ASBOX
++ ) |
++ sed "s/^/$as_me: WARNING: /" >&2
++ ;;
++esac
++echo "$as_me:$LINENO: checking for asm/errno.h" >&5
++echo $ECHO_N "checking for asm/errno.h... $ECHO_C" >&6
++if test "${ac_cv_header_asm_errno_h+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_header_asm_errno_h=$ac_header_preproc
++fi
++echo "$as_me:$LINENO: result: $ac_cv_header_asm_errno_h" >&5
++echo "${ECHO_T}$ac_cv_header_asm_errno_h" >&6
++
+ fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++if test $ac_cv_header_asm_errno_h = yes; then
+ :
+ else
+- echo "$ac_t""no" 1>&6
+-{ echo "configure: error: *** Unable to find asm/errno.h!!!" 1>&2; exit 1; }
++ { { echo "$as_me:$LINENO: error: *** Unable to find asm/errno.h!!!" >&5
++echo "$as_me: error: *** Unable to find asm/errno.h!!!" >&2;}
++ { (exit 1); exit 1; }; }
+
+ fi
+
+
+-ac_safe=`echo "linux/atmsap.h" | sed 'y%./+-%__p_%'`
+-echo $ac_n "checking for linux/atmsap.h""... $ac_c" 1>&6
+-echo "configure:5489: checking for linux/atmsap.h" >&5
+-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
+-else
+- cat > conftest.$ac_ext <<EOF
+-#line 5494 "configure"
+-#include "confdefs.h"
++
++if test "${ac_cv_header_linux_atmsap_h+set}" = set; then
++ echo "$as_me:$LINENO: checking for linux/atmsap.h" >&5
++echo $ECHO_N "checking for linux/atmsap.h... $ECHO_C" >&6
++if test "${ac_cv_header_linux_atmsap_h+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++fi
++echo "$as_me:$LINENO: result: $ac_cv_header_linux_atmsap_h" >&5
++echo "${ECHO_T}$ac_cv_header_linux_atmsap_h" >&6
++else
++ # Is the header compilable?
++echo "$as_me:$LINENO: checking linux/atmsap.h usability" >&5
++echo $ECHO_N "checking linux/atmsap.h usability... $ECHO_C" >&6
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++$ac_includes_default
+ #include <linux/atmsap.h>
+-EOF
+-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+-{ (eval echo configure:5499: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+-if test -z "$ac_err"; then
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=yes"
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_header_compiler=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_header_compiler=no
++fi
++rm -f conftest.$ac_objext conftest.$ac_ext
++echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
++echo "${ECHO_T}$ac_header_compiler" >&6
++
++# Is the header present?
++echo "$as_me:$LINENO: checking linux/atmsap.h presence" >&5
++echo $ECHO_N "checking linux/atmsap.h presence... $ECHO_C" >&6
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <linux/atmsap.h>
++_ACEOF
++if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
++ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ else
++ ac_cpp_err=
++ fi
+ else
+- echo "$ac_err" >&5
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_header_$ac_safe=no"
++ ac_cpp_err=yes
+ fi
+-rm -f conftest*
++if test -z "$ac_cpp_err"; then
++ ac_header_preproc=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ ac_header_preproc=no
++fi
++rm -f conftest.err conftest.$ac_ext
++echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
++echo "${ECHO_T}$ac_header_preproc" >&6
++
++# So? What about this header?
++case $ac_header_compiler:$ac_header_preproc in
++ yes:no )
++ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: accepted by the compiler, rejected by the preprocessor!" >&5
++echo "$as_me: WARNING: linux/atmsap.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
++ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: proceeding with the preprocessor's result" >&5
++echo "$as_me: WARNING: linux/atmsap.h: proceeding with the preprocessor's result" >&2;}
++ (
++ cat <<\_ASBOX
++## ------------------------------------ ##
++## Report this to bug-autoconf@gnu.org. ##
++## ------------------------------------ ##
++_ASBOX
++ ) |
++ sed "s/^/$as_me: WARNING: /" >&2
++ ;;
++ no:yes )
++ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: present but cannot be compiled" >&5
++echo "$as_me: WARNING: linux/atmsap.h: present but cannot be compiled" >&2;}
++ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: check for missing prerequisite headers?" >&5
++echo "$as_me: WARNING: linux/atmsap.h: check for missing prerequisite headers?" >&2;}
++ { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: proceeding with the preprocessor's result" >&5
++echo "$as_me: WARNING: linux/atmsap.h: proceeding with the preprocessor's result" >&2;}
++ (
++ cat <<\_ASBOX
++## ------------------------------------ ##
++## Report this to bug-autoconf@gnu.org. ##
++## ------------------------------------ ##
++_ASBOX
++ ) |
++ sed "s/^/$as_me: WARNING: /" >&2
++ ;;
++esac
++echo "$as_me:$LINENO: checking for linux/atmsap.h" >&5
++echo $ECHO_N "checking for linux/atmsap.h... $ECHO_C" >&6
++if test "${ac_cv_header_linux_atmsap_h+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_header_linux_atmsap_h=$ac_header_preproc
+ fi
+-if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
++echo "$as_me:$LINENO: result: $ac_cv_header_linux_atmsap_h" >&5
++echo "${ECHO_T}$ac_cv_header_linux_atmsap_h" >&6
++
++fi
++if test $ac_cv_header_linux_atmsap_h = yes; then
+ :
+ else
+- echo "$ac_t""no" 1>&6
+-{ echo "configure: error: *** Unable to find linux/atmsap.h!!!" 1>&2; exit 1; }
++ { { echo "$as_me:$LINENO: error: *** Unable to find linux/atmsap.h!!!" >&5
++echo "$as_me: error: *** Unable to find linux/atmsap.h!!!" >&2;}
++ { (exit 1); exit 1; }; }
+
+ fi
+
+
+-echo $ac_n "checking for main in -lresolv""... $ac_c" 1>&6
+-echo "configure:5524: checking for main in -lresolv" >&5
+-ac_lib_var=`echo resolv'_'main | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++
++
++echo "$as_me:$LINENO: checking for main in -lresolv" >&5
++echo $ECHO_N "checking for main in -lresolv... $ECHO_C" >&6
++if test "${ac_cv_lib_resolv_main+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lresolv $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 5532 "configure"
+-#include "confdefs.h"
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-int main() {
+-main()
+-; return 0; }
+-EOF
+-if { (eval echo configure:5539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_lib=HAVE_LIB`echo resolv | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_lib 1
+-EOF
++int
++main ()
++{
++main ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_resolv_main=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_resolv_main=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_main" >&5
++echo "${ECHO_T}$ac_cv_lib_resolv_main" >&6
++if test $ac_cv_lib_resolv_main = yes; then
++ cat >>confdefs.h <<_ACEOF
++#define HAVE_LIBRESOLV 1
++_ACEOF
+
+ LIBS="-lresolv $LIBS"
+
+ else
+- echo "$ac_t""no" 1>&6
+-{ echo "configure: error: *** Unable to find libresolv!!!" 1>&2; exit 1; }
++ { { echo "$as_me:$LINENO: error: *** Unable to find libresolv!!!" >&5
++echo "$as_me: error: *** Unable to find libresolv!!!" >&2;}
++ { (exit 1); exit 1; }; }
+
+ fi
+
+@@ -5571,639 +8342,1417 @@
+ CFLAGS="$INCLUDES $CFLAGS -Wall -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes"
+ YACC="$YACC -d"
+
+-cat >> confdefs.h <<\EOF
++cat >>confdefs.h <<\_ACEOF
+ #define YY_USE_CONST 1
+-EOF
++_ACEOF
+
+
+ atmsigd_conf_dir=` test "x$exec_prefix" = xNONE && exec_prefix=$ac_default_prefix
+ test "x$prefix" = xNONE && prefix=${exec_prefix}
+ eval echo "$sysconfdir"`
+-cat >> confdefs.h <<EOF
++cat >>confdefs.h <<_ACEOF
+ #define ATMSIGD_CONF "$atmsigd_conf_dir/atmsigd.conf"
+-EOF
++_ACEOF
++
+
+
+ # Check whether --with-uni or --without-uni was given.
+ if test "${with_uni+set}" = set; then
+ withval="$with_uni"
+-
++
+ case "$with_uni" in
+- "3.0" ) cat >> confdefs.h <<\EOF
++ "3.0" ) cat >>confdefs.h <<\_ACEOF
+ #define UNI30 1
+-EOF
++_ACEOF
+
+ ;;
+- "3.1" ) cat >> confdefs.h <<\EOF
++ "3.1" ) cat >>confdefs.h <<\_ACEOF
+ #define UNI31 1
+-EOF
++_ACEOF
+
+ ;;
+- "4.0" ) cat >> confdefs.h <<\EOF
++ "4.0" ) cat >>confdefs.h <<\_ACEOF
+ #define UNI40 1
+-EOF
++_ACEOF
+
+ ;;
+ *)
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\_ACEOF
+ #define DYNAMIC_UNI 1
+-EOF
++_ACEOF
+
+- echo "configure: warning: *** UNI version not specified correctly. Defaulting to dynamic UNI." 1>&2
++ { echo "$as_me:$LINENO: WARNING: *** UNI version not specified correctly. Defaulting to dynamic UNI." >&5
++echo "$as_me: WARNING: *** UNI version not specified correctly. Defaulting to dynamic UNI." >&2;}
+ esac
+-
++
+ else
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\_ACEOF
+ #define DYNAMIC_UNI 1
+-EOF
++_ACEOF
+
+
+-fi
+-
++fi;
+
+ # Check whether --enable-allow_uni30 or --disable-allow_uni30 was given.
+ if test "${enable_allow_uni30+set}" = set; then
+ enableval="$enable_allow_uni30"
+-
++
+ if test "$with_uni" = "3.1" ; then
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\_ACEOF
+ #define ALLOW_UNI30 1
+-EOF
++_ACEOF
+
+ else
+- echo "configure: warning: *** Allow UNI 3.0 was not enabled. It is only valid when UNI 3.1 is specified as the default via --with-uni." 1>&2
++ { echo "$as_me:$LINENO: WARNING: *** Allow UNI 3.0 was not enabled. It is only valid when UNI 3.1 is specified as the default via --with-uni." >&5
++echo "$as_me: WARNING: *** Allow UNI 3.0 was not enabled. It is only valid when UNI 3.1 is specified as the default via --with-uni." >&2;}
+ fi
+-
+
+-fi
+
++fi;
+
+ # Check whether --enable-q2963_1 or --disable-q2963_1 was given.
+ if test "${enable_q2963_1+set}" = set; then
+ enableval="$enable_q2963_1"
+-
++
+ if test "$with_uni" = "4.0" ; then
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\_ACEOF
+ #define Q2963_1 1
+-EOF
++_ACEOF
+
+ else
+- echo "configure: warning: *** Q.2963.1 was not enabled. It is only valid when UNI 4.0 is specified as the default via --with-uni." 1>&2
++ { echo "$as_me:$LINENO: WARNING: *** Q.2963.1 was not enabled. It is only valid when UNI 4.0 is specified as the default via --with-uni." >&5
++echo "$as_me: WARNING: *** Q.2963.1 was not enabled. It is only valid when UNI 4.0 is specified as the default via --with-uni." >&2;}
+ fi
+-
+
+-fi
+
++fi;
+
+ # Check whether --enable-cisco or --disable-cisco was given.
+ if test "${enable_cisco+set}" = set; then
+ enableval="$enable_cisco"
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\_ACEOF
+ #define CISCO 1
+-EOF
++_ACEOF
+
+
+-fi
+-
++fi;
+
+ # Check whether --enable-thomflex or --disable-thomflex was given.
+ if test "${enable_thomflex+set}" = set; then
+ enableval="$enable_thomflex"
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\_ACEOF
+ #define THOMFLEX 1
+-EOF
+-
++_ACEOF
+
+-fi
+
++fi;
+
+-cat >> confdefs.h <<\EOF
++cat >>confdefs.h <<\_ACEOF
+ #define BROKEN_POLL 1
+-EOF
++_ACEOF
+
+
+ # Check whether --enable-mpoa_1_1 or --disable-mpoa_1_1 was given.
+ if test "${enable_mpoa_1_1+set}" = set; then
+ enableval="$enable_mpoa_1_1"
+- cat >> confdefs.h <<\EOF
++ cat >>confdefs.h <<\_ACEOF
+ #define MPOA_1_1 1
+-EOF
+-
++_ACEOF
+
+-fi
+
++fi;
+
+ # Check whether --enable-mpr or --disable-mpr was given.
+ if test "${enable_mpr+set}" = set; then
+ enableval="$enable_mpr"
+-
++
+ case "$enable_mpr" in
+ "" | y | ye | yes | Y | YE | YES )
+- echo $ac_n "checking for main in -lmpr""... $ac_c" 1>&6
+-echo "configure:5704: checking for main in -lmpr" >&5
+-ac_lib_var=`echo mpr'_'main | sed 'y%./+-%__p_%'`
+-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+- echo $ac_n "(cached) $ac_c" 1>&6
++
++echo "$as_me:$LINENO: checking for main in -lmpr" >&5
++echo $ECHO_N "checking for main in -lmpr... $ECHO_C" >&6
++if test "${ac_cv_lib_mpr_main+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- ac_save_LIBS="$LIBS"
++ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lmpr $LIBS"
+-cat > conftest.$ac_ext <<EOF
+-#line 5712 "configure"
+-#include "confdefs.h"
++cat >conftest.$ac_ext <<_ACEOF
++#line $LINENO "configure"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-int main() {
+-main()
+-; return 0; }
+-EOF
+-if { (eval echo configure:5719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=yes"
+-else
+- echo "configure: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- rm -rf conftest*
+- eval "ac_cv_lib_$ac_lib_var=no"
+-fi
+-rm -f conftest*
+-LIBS="$ac_save_LIBS"
+
+-fi
+-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+- echo "$ac_t""yes" 1>&6
+- ac_tr_lib=HAVE_LIB`echo mpr | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+- -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+- cat >> confdefs.h <<EOF
+-#define $ac_tr_lib 1
+-EOF
++int
++main ()
++{
++main ();
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext conftest$ac_exeext
++if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
++ (eval $ac_link) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -s conftest$ac_exeext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_lib_mpr_main=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_lib_mpr_main=no
++fi
++rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++LIBS=$ac_check_lib_save_LIBS
++fi
++echo "$as_me:$LINENO: result: $ac_cv_lib_mpr_main" >&5
++echo "${ECHO_T}$ac_cv_lib_mpr_main" >&6
++if test $ac_cv_lib_mpr_main = yes; then
++ cat >>confdefs.h <<_ACEOF
++#define HAVE_LIBMPR 1
++_ACEOF
+
+ LIBS="-lmpr $LIBS"
+
+ else
+- echo "$ac_t""no" 1>&6
+
+- echo "configure: warning: *** Could not find libmpr! Is MPR installed?" 1>&2
+-
+-
++ { echo "$as_me:$LINENO: WARNING: *** Could not find libmpr! Is MPR installed?" >&5
++echo "$as_me: WARNING: *** Could not find libmpr! Is MPR installed?" >&2;}
++
++
+ fi
+
+ ;;
+ esac
+-
+
+-fi
+
++fi;
+
+
+-trap '' 1 2 15
+-cat > confcache <<\EOF
++ ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/test/Makefile src/debug/Makefile src/qgen/Makefile src/saal/Makefile src/sigd/Makefile src/maint/Makefile src/arpd/Makefile src/ilmid/Makefile src/ilmid/asn1/Makefile src/man/Makefile src/led/Makefile src/lane/Makefile src/mpoad/Makefile src/switch/Makefile src/switch/debug/Makefile src/switch/tcp/Makefile src/config/Makefile src/config/init-redhat/Makefile src/extra/Makefile src/extra/linux-atm.spec src/extra/ANS/Makefile"
++cat >confcache <<\_ACEOF
+ # This file is a shell script that caches the results of configure
+ # tests run on this system so they can be shared between configure
+-# scripts and configure runs. It is not useful on other systems.
+-# If it contains results you don't want to keep, you may remove or edit it.
++# scripts and configure runs, see configure's option --config-cache.
++# It is not useful on other systems. If it contains results you don't
++# want to keep, you may remove or edit it.
+ #
+-# By default, configure uses ./config.cache as the cache file,
+-# creating it if it does not exist already. You can give configure
+-# the --cache-file=FILE option to use a different cache file; that is
+-# what configure does when it calls configure scripts in
+-# subdirectories, so they share the cache.
+-# Giving --cache-file=/dev/null disables caching, for debugging configure.
+-# config.status only pays attention to the cache file if you give it the
+-# --recheck option to rerun configure.
++# config.status only pays attention to the cache file if you give it
++# the --recheck option to rerun configure.
+ #
+-EOF
++# `ac_cv_env_foo' variables (set or unset) will be overridden when
++# loading this file, other *unset* `ac_cv_foo' will be assigned the
++# following values.
++
++_ACEOF
++
+ # The following way of writing the cache mishandles newlines in values,
+ # but we know of no workaround that is simple, portable, and efficient.
+ # So, don't put newlines in cache variables' values.
+ # Ultrix sh set writes to stderr and can't be redirected directly,
+ # and sets the high bit in the cache file unless we assign to the vars.
+-(set) 2>&1 |
+- case `(ac_space=' '; set | grep ac_space) 2>&1` in
+- *ac_space=\ *)
+- # `set' does not quote correctly, so add quotes (double-quote substitution
+- # turns \\\\ into \\, and sed turns \\ into \).
+- sed -n \
+- -e "s/'/'\\\\''/g" \
+- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+- ;;
+- *)
+- # `set' quotes correctly as required by POSIX, so do not add quotes.
+- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+- ;;
+- esac >> confcache
+-if cmp -s $cache_file confcache; then
+- :
+-else
++{
++ (set) 2>&1 |
++ case `(ac_space=' '; set | grep ac_space) 2>&1` in
++ *ac_space=\ *)
++ # `set' does not quote correctly, so add quotes (double-quote
++ # substitution turns \\\\ into \\, and sed turns \\ into \).
++ sed -n \
++ "s/'/'\\\\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
++ ;;
++ *)
++ # `set' quotes correctly as required by POSIX, so do not add quotes.
++ sed -n \
++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
++ ;;
++ esac;
++} |
++ sed '
++ t clear
++ : clear
++ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
++ t end
++ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
++ : end' >>confcache
++if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+- echo "updating cache $cache_file"
+- cat confcache > $cache_file
++ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
++ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+ fi
+ rm -f confcache
+
+-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+-
+ test "x$prefix" = xNONE && prefix=$ac_default_prefix
+ # Let make expand exec_prefix.
+ test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+-# Any assignment to VPATH causes Sun make to only execute
+-# the first set of double-colon rules, so remove it if not needed.
+-# If there is a colon in the path, we need to keep it.
++# VPATH may cause trouble with some makes, so we remove $(srcdir),
++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
++# trailing colons and then remove the whole line if VPATH becomes empty
++# (actually we leave an empty line to preserve line numbers).
+ if test "x$srcdir" = x.; then
+- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
++ ac_vpsub='/^[ ]*VPATH[ ]*=/{
++s/:*\$(srcdir):*/:/;
++s/:*\${srcdir}:*/:/;
++s/:*@srcdir@:*/:/;
++s/^\([^=]*=[ ]*\):*/\1/;
++s/:*$//;
++s/^[^=]*=[ ]*$//;
++}'
+ fi
+
+-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+-
+ DEFS=-DHAVE_CONFIG_H
+
+-# Without the "./", some shells look in PATH for config.status.
+-: ${CONFIG_STATUS=./config.status}
++ac_libobjs=
++ac_ltlibobjs=
++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
++ # 1. Remove the extension, and $U if already installed.
++ ac_i=`echo "$ac_i" |
++ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
++ # 2. Add them.
++ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
++ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
++done
++LIBOBJS=$ac_libobjs
+
+-echo creating $CONFIG_STATUS
+-rm -f $CONFIG_STATUS
+-cat > $CONFIG_STATUS <<EOF
+-#! /bin/sh
+-# Generated automatically by configure.
++LTLIBOBJS=$ac_ltlibobjs
++
++
++
++: ${CONFIG_STATUS=./config.status}
++ac_clean_files_save=$ac_clean_files
++ac_clean_files="$ac_clean_files $CONFIG_STATUS"
++{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
++echo "$as_me: creating $CONFIG_STATUS" >&6;}
++cat >$CONFIG_STATUS <<_ACEOF
++#! $SHELL
++# Generated by $as_me.
+ # Run this file to recreate the current configuration.
+-# This directory was configured as follows,
+-# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+-#
+-# $0 $ac_configure_args
+-#
+ # Compiler output produced by configure, useful for debugging
+-# configure, is in ./config.log if it exists.
++# configure, is in config.log if it exists.
+
+-ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+-for ac_option
++debug=false
++ac_cs_recheck=false
++ac_cs_silent=false
++SHELL=\${CONFIG_SHELL-$SHELL}
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++## --------------------- ##
++## M4sh Initialization. ##
++## --------------------- ##
++
++# Be Bourne compatible
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++ emulate sh
++ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
++elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
++ set -o posix
++fi
++
++# Support unset when possible.
++if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
++ as_unset=unset
++else
++ as_unset=false
++fi
++
++
++# Work around bugs in pre-3.0 UWIN ksh.
++$as_unset ENV MAIL MAILPATH
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++for as_var in \
++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
++ LC_TELEPHONE LC_TIME
+ do
+- case "\$ac_option" in
+- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+- echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+- exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+- -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+- echo "$CONFIG_STATUS generated by autoconf version 2.13"
+- exit 0 ;;
+- -help | --help | --hel | --he | --h)
+- echo "\$ac_cs_usage"; exit 0 ;;
+- *) echo "\$ac_cs_usage"; exit 1 ;;
++ if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
++ eval $as_var=C; export $as_var
++ else
++ $as_unset $as_var
++ fi
++done
++
++# Required to use basename.
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
++
++
++# Name of the executable.
++as_me=`$as_basename "$0" ||
++$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)$' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X/"$0" |
++ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
++ /^X\/\(\/\/\)$/{ s//\1/; q; }
++ /^X\/\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++
++
++# PATH needs CR, and LINENO needs CR and PATH.
++# Avoid depending upon Character Ranges.
++as_cr_letters='abcdefghijklmnopqrstuvwxyz'
++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
++as_cr_Letters=$as_cr_letters$as_cr_LETTERS
++as_cr_digits='0123456789'
++as_cr_alnum=$as_cr_Letters$as_cr_digits
++
++# The user is always right.
++if test "${PATH_SEPARATOR+set}" != set; then
++ echo "#! /bin/sh" >conf$$.sh
++ echo "exit 0" >>conf$$.sh
++ chmod +x conf$$.sh
++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
++ PATH_SEPARATOR=';'
++ else
++ PATH_SEPARATOR=:
++ fi
++ rm -f conf$$.sh
++fi
++
++
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x$as_lineno_3" = "x$as_lineno_2" || {
++ # Find who we are. Look in the path if we contain no path at all
++ # relative or not.
++ case $0 in
++ *[\\/]* ) as_myself=$0 ;;
++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
++done
++
++ ;;
+ esac
++ # We did not find ourselves, most probably we were run as `sh COMMAND'
++ # in which case we are not to be found in the path.
++ if test "x$as_myself" = x; then
++ as_myself=$0
++ fi
++ if test ! -f "$as_myself"; then
++ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
++echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
++ { (exit 1); exit 1; }; }
++ fi
++ case $CONFIG_SHELL in
++ '')
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for as_base in sh bash ksh sh5; do
++ case $as_dir in
++ /*)
++ if ("$as_dir/$as_base" -c '
++ as_lineno_1=$LINENO
++ as_lineno_2=$LINENO
++ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
++ test "x$as_lineno_1" != "x$as_lineno_2" &&
++ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
++ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
++ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
++ CONFIG_SHELL=$as_dir/$as_base
++ export CONFIG_SHELL
++ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
++ fi;;
++ esac
++ done
+ done
++;;
++ esac
+
+-ac_given_srcdir=$srcdir
+-ac_given_INSTALL="$INSTALL"
+-
+-trap 'rm -fr `echo "Makefile \
+- doc/Makefile \
+- m4/Makefile \
+- src/Makefile \
+- src/include/Makefile \
+- src/lib/Makefile \
+- src/test/Makefile \
+- src/debug/Makefile \
+- src/qgen/Makefile \
+- src/saal/Makefile \
+- src/sigd/Makefile \
+- src/maint/Makefile \
+- src/arpd/Makefile \
+- src/ilmid/Makefile \
+- src/ilmid/asn1/Makefile \
+- src/man/Makefile \
+- src/led/Makefile \
+- src/lane/Makefile \
+- src/mpoad/Makefile \
+- src/switch/Makefile \
+- src/switch/debug/Makefile \
+- src/switch/tcp/Makefile \
+- src/config/Makefile \
+- src/config/init-redhat/Makefile \
+- src/extra/Makefile \
+- src/extra/linux-atm.spec \
+- src/extra/ANS/Makefile
+- config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+-EOF
+-cat >> $CONFIG_STATUS <<EOF
++ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
++ # uniformly replaced by the line number. The first 'sed' inserts a
++ # line-number line before each line; the second 'sed' does the real
++ # work. The second script uses 'N' to pair each line-number line
++ # with the numbered line, and appends trailing '-' during
++ # substitution so that $LINENO is not a special case at line end.
++ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
++ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
++ sed '=' <$as_myself |
++ sed '
++ N
++ s,$,-,
++ : loop
++ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
++ t loop
++ s,-$,,
++ s,^['$as_cr_digits']*\n,,
++ ' >$as_me.lineno &&
++ chmod +x $as_me.lineno ||
++ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
++echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
++ { (exit 1); exit 1; }; }
++
++ # Don't try to exec as it changes $[0], causing all sort of problems
++ # (the dirname of $[0] is not the place where we might find the
++ # original and so on. Autoconf is especially sensible to this).
++ . ./$as_me.lineno
++ # Exit status is that of the last command.
++ exit
++}
+
+-# Protect against being on the right side of a sed subst in config.status.
+-sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+- s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+-$ac_vpsub
+-$extrasub
+-s%@SHELL@%$SHELL%g
+-s%@CFLAGS@%$CFLAGS%g
+-s%@CPPFLAGS@%$CPPFLAGS%g
+-s%@CXXFLAGS@%$CXXFLAGS%g
+-s%@FFLAGS@%$FFLAGS%g
+-s%@DEFS@%$DEFS%g
+-s%@LDFLAGS@%$LDFLAGS%g
+-s%@LIBS@%$LIBS%g
+-s%@exec_prefix@%$exec_prefix%g
+-s%@prefix@%$prefix%g
+-s%@program_transform_name@%$program_transform_name%g
+-s%@bindir@%$bindir%g
+-s%@sbindir@%$sbindir%g
+-s%@libexecdir@%$libexecdir%g
+-s%@datadir@%$datadir%g
+-s%@sysconfdir@%$sysconfdir%g
+-s%@sharedstatedir@%$sharedstatedir%g
+-s%@localstatedir@%$localstatedir%g
+-s%@libdir@%$libdir%g
+-s%@includedir@%$includedir%g
+-s%@oldincludedir@%$oldincludedir%g
+-s%@infodir@%$infodir%g
+-s%@mandir@%$mandir%g
+-s%@host@%$host%g
+-s%@host_alias@%$host_alias%g
+-s%@host_cpu@%$host_cpu%g
+-s%@host_vendor@%$host_vendor%g
+-s%@host_os@%$host_os%g
+-s%@target@%$target%g
+-s%@target_alias@%$target_alias%g
+-s%@target_cpu@%$target_cpu%g
+-s%@target_vendor@%$target_vendor%g
+-s%@target_os@%$target_os%g
+-s%@build@%$build%g
+-s%@build_alias@%$build_alias%g
+-s%@build_cpu@%$build_cpu%g
+-s%@build_vendor@%$build_vendor%g
+-s%@build_os@%$build_os%g
+-s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+-s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+-s%@INSTALL_DATA@%$INSTALL_DATA%g
+-s%@PACKAGE@%$PACKAGE%g
+-s%@VERSION@%$VERSION%g
+-s%@ACLOCAL@%$ACLOCAL%g
+-s%@AUTOCONF@%$AUTOCONF%g
+-s%@AUTOMAKE@%$AUTOMAKE%g
+-s%@AUTOHEADER@%$AUTOHEADER%g
+-s%@MAKEINFO@%$MAKEINFO%g
+-s%@SET_MAKE@%$SET_MAKE%g
+-s%@LIBVER_CURRENT@%$LIBVER_CURRENT%g
+-s%@LIBVER_REVISION@%$LIBVER_REVISION%g
+-s%@LIBVER_AGE@%$LIBVER_AGE%g
+-s%@CC@%$CC%g
+-s%@LEX@%$LEX%g
+-s%@LEXLIB@%$LEXLIB%g
+-s%@CPP@%$CPP%g
+-s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g
+-s%@YACC@%$YACC%g
+-s%@LN_S@%$LN_S%g
+-s%@OBJEXT@%$OBJEXT%g
+-s%@EXEEXT@%$EXEEXT%g
+-s%@ECHO@%$ECHO%g
+-s%@RANLIB@%$RANLIB%g
+-s%@STRIP@%$STRIP%g
+-s%@LIBTOOL@%$LIBTOOL%g
+-s%@LIBTOOL_DEPS@%$LIBTOOL_DEPS%g
+-s%@PERL@%$PERL%g
+
+-CEOF
+-EOF
++case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
++ *c*,-n*) ECHO_N= ECHO_C='
++' ECHO_T=' ' ;;
++ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
++ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
++esac
+
+-cat >> $CONFIG_STATUS <<\EOF
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
+
+-# Split the substitutions into bite-sized pieces for seds with
+-# small command number limits, like on Digital OSF/1 and HP-UX.
+-ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+-ac_file=1 # Number of current file.
+-ac_beg=1 # First line for current file.
+-ac_end=$ac_max_sed_cmds # Line after last line for current file.
+-ac_more_lines=:
+-ac_sed_cmds=""
+-while $ac_more_lines; do
+- if test $ac_beg -gt 1; then
+- sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+- else
+- sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+- fi
+- if test ! -s conftest.s$ac_file; then
+- ac_more_lines=false
+- rm -f conftest.s$ac_file
++rm -f conf$$ conf$$.exe conf$$.file
++echo >conf$$.file
++if ln -s conf$$.file conf$$ 2>/dev/null; then
++ # We could just check for DJGPP; but this test a) works b) is more generic
++ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
++ if test -f conf$$.exe; then
++ # Don't use ln at all; we don't have any links
++ as_ln_s='cp -p'
+ else
+- if test -z "$ac_sed_cmds"; then
+- ac_sed_cmds="sed -f conftest.s$ac_file"
+- else
+- ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+- fi
+- ac_file=`expr $ac_file + 1`
+- ac_beg=$ac_end
+- ac_end=`expr $ac_end + $ac_max_sed_cmds`
++ as_ln_s='ln -s'
+ fi
++elif ln conf$$.file conf$$ 2>/dev/null; then
++ as_ln_s=ln
++else
++ as_ln_s='cp -p'
++fi
++rm -f conf$$ conf$$.exe conf$$.file
++
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p=:
++else
++ as_mkdir_p=false
++fi
++
++as_executable_p="test -f"
++
++# Sed expression to map a string onto a valid CPP name.
++as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
++
++# Sed expression to map a string onto a valid variable name.
++as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
++
++
++# IFS
++# We need space, tab and new line, in precisely that order.
++as_nl='
++'
++IFS=" $as_nl"
++
++# CDPATH.
++$as_unset CDPATH
++
++exec 6>&1
++
++# Open the log real soon, to keep \$[0] and so on meaningful, and to
++# report actual input values of CONFIG_FILES etc. instead of their
++# values after options handling. Logging --version etc. is OK.
++exec 5>>config.log
++{
++ echo
++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
++## Running $as_me. ##
++_ASBOX
++} >&5
++cat >&5 <<_CSEOF
++
++This file was extended by $as_me, which was
++generated by GNU Autoconf 2.57. Invocation command line was
++
++ CONFIG_FILES = $CONFIG_FILES
++ CONFIG_HEADERS = $CONFIG_HEADERS
++ CONFIG_LINKS = $CONFIG_LINKS
++ CONFIG_COMMANDS = $CONFIG_COMMANDS
++ $ $0 $@
++
++_CSEOF
++echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
++echo >&5
++_ACEOF
++
++# Files that config.status was made for.
++if test -n "$ac_config_files"; then
++ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
++fi
++
++if test -n "$ac_config_headers"; then
++ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
++fi
++
++if test -n "$ac_config_links"; then
++ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
++fi
++
++if test -n "$ac_config_commands"; then
++ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
++fi
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++
++ac_cs_usage="\
++\`$as_me' instantiates files from templates according to the
++current configuration.
++
++Usage: $0 [OPTIONS] [FILE]...
++
++ -h, --help print this help, then exit
++ -V, --version print version number, then exit
++ -q, --quiet do not print progress messages
++ -d, --debug don't remove temporary files
++ --recheck update $as_me by reconfiguring in the same conditions
++ --file=FILE[:TEMPLATE]
++ instantiate the configuration file FILE
++ --header=FILE[:TEMPLATE]
++ instantiate the configuration header FILE
++
++Configuration files:
++$config_files
++
++Configuration headers:
++$config_headers
++
++Configuration commands:
++$config_commands
++
++Report bugs to <bug-autoconf@gnu.org>."
++_ACEOF
++
++cat >>$CONFIG_STATUS <<_ACEOF
++ac_cs_version="\\
++config.status
++configured by $0, generated by GNU Autoconf 2.57,
++ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
++
++Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
++Free Software Foundation, Inc.
++This config.status script is free software; the Free Software Foundation
++gives unlimited permission to copy, distribute and modify it."
++srcdir=$srcdir
++INSTALL="$INSTALL"
++_ACEOF
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++# If no file are specified by the user, then we need to provide default
++# value. By we need to know if files were specified by the user.
++ac_need_defaults=:
++while test $# != 0
++do
++ case $1 in
++ --*=*)
++ ac_option=`expr "x$1" : 'x\([^=]*\)='`
++ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
++ ac_shift=:
++ ;;
++ -*)
++ ac_option=$1
++ ac_optarg=$2
++ ac_shift=shift
++ ;;
++ *) # This is not an option, so the user has probably given explicit
++ # arguments.
++ ac_option=$1
++ ac_need_defaults=false;;
++ esac
++
++ case $ac_option in
++ # Handling of the options.
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
++ ac_cs_recheck=: ;;
++ --version | --vers* | -V )
++ echo "$ac_cs_version"; exit 0 ;;
++ --he | --h)
++ # Conflict between --help and --header
++ { { echo "$as_me:$LINENO: error: ambiguous option: $1
++Try \`$0 --help' for more information." >&5
++echo "$as_me: error: ambiguous option: $1
++Try \`$0 --help' for more information." >&2;}
++ { (exit 1); exit 1; }; };;
++ --help | --hel | -h )
++ echo "$ac_cs_usage"; exit 0 ;;
++ --debug | --d* | -d )
++ debug=: ;;
++ --file | --fil | --fi | --f )
++ $ac_shift
++ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
++ ac_need_defaults=false;;
++ --header | --heade | --head | --hea )
++ $ac_shift
++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
++ ac_need_defaults=false;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil | --si | --s)
++ ac_cs_silent=: ;;
++
++ # This is an error.
++ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
++Try \`$0 --help' for more information." >&5
++echo "$as_me: error: unrecognized option: $1
++Try \`$0 --help' for more information." >&2;}
++ { (exit 1); exit 1; }; } ;;
++
++ *) ac_config_targets="$ac_config_targets $1" ;;
++
++ esac
++ shift
++done
++
++ac_configure_extra_args=
++
++if $ac_cs_silent; then
++ exec 6>/dev/null
++ ac_configure_extra_args="$ac_configure_extra_args --silent"
++fi
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF
++if \$ac_cs_recheck; then
++ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
++ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
++fi
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<_ACEOF
++#
++# INIT-COMMANDS section.
++#
++
++
++
++_ACEOF
++
++
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++for ac_config_target in $ac_config_targets
++do
++ case "$ac_config_target" in
++ # Handling of arguments.
++ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
++ "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
++ "m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
++ "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
++ "src/include/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/include/Makefile" ;;
++ "src/lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;;
++ "src/test/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/test/Makefile" ;;
++ "src/debug/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/debug/Makefile" ;;
++ "src/qgen/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/qgen/Makefile" ;;
++ "src/saal/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/saal/Makefile" ;;
++ "src/sigd/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/sigd/Makefile" ;;
++ "src/maint/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/maint/Makefile" ;;
++ "src/arpd/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/arpd/Makefile" ;;
++ "src/ilmid/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/ilmid/Makefile" ;;
++ "src/ilmid/asn1/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/ilmid/asn1/Makefile" ;;
++ "src/man/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/man/Makefile" ;;
++ "src/led/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/led/Makefile" ;;
++ "src/lane/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/lane/Makefile" ;;
++ "src/mpoad/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/mpoad/Makefile" ;;
++ "src/switch/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/switch/Makefile" ;;
++ "src/switch/debug/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/switch/debug/Makefile" ;;
++ "src/switch/tcp/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/switch/tcp/Makefile" ;;
++ "src/config/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/config/Makefile" ;;
++ "src/config/init-redhat/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/config/init-redhat/Makefile" ;;
++ "src/extra/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/Makefile" ;;
++ "src/extra/linux-atm.spec" ) CONFIG_FILES="$CONFIG_FILES src/extra/linux-atm.spec" ;;
++ "src/extra/ANS/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/extra/ANS/Makefile" ;;
++ "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
++ "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
++ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
++echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
++ { (exit 1); exit 1; }; };;
++ esac
+ done
+-if test -z "$ac_sed_cmds"; then
+- ac_sed_cmds=cat
++
++# If the user did not use the arguments to specify the items to instantiate,
++# then the envvar interface is used. Set only those that are not.
++# We use the long form for the default assignment because of an extremely
++# bizarre bug on SunOS 4.1.3.
++if $ac_need_defaults; then
++ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
++ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
++ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+ fi
+-EOF
+
+-cat >> $CONFIG_STATUS <<EOF
++# Have a temporary directory for convenience. Make it in the build tree
++# simply because there is no reason to put it here, and in addition,
++# creating and moving files from /tmp can sometimes cause problems.
++# Create a temporary directory, and hook for its removal unless debugging.
++$debug ||
++{
++ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
++ trap '{ (exit 1); exit 1; }' 1 2 13 15
++}
+
+-CONFIG_FILES=\${CONFIG_FILES-"Makefile \
+- doc/Makefile \
+- m4/Makefile \
+- src/Makefile \
+- src/include/Makefile \
+- src/lib/Makefile \
+- src/test/Makefile \
+- src/debug/Makefile \
+- src/qgen/Makefile \
+- src/saal/Makefile \
+- src/sigd/Makefile \
+- src/maint/Makefile \
+- src/arpd/Makefile \
+- src/ilmid/Makefile \
+- src/ilmid/asn1/Makefile \
+- src/man/Makefile \
+- src/led/Makefile \
+- src/lane/Makefile \
+- src/mpoad/Makefile \
+- src/switch/Makefile \
+- src/switch/debug/Makefile \
+- src/switch/tcp/Makefile \
+- src/config/Makefile \
+- src/config/init-redhat/Makefile \
+- src/extra/Makefile \
+- src/extra/linux-atm.spec \
+- src/extra/ANS/Makefile
+- "}
+-EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
++# Create a (secure) tmp directory for tmp files.
++
++{
++ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
++ test -n "$tmp" && test -d "$tmp"
++} ||
++{
++ tmp=./confstat$$-$RANDOM
++ (umask 077 && mkdir $tmp)
++} ||
++{
++ echo "$me: cannot create a temporary directory in ." >&2
++ { (exit 1); exit 1; }
++}
++
++_ACEOF
++
++cat >>$CONFIG_STATUS <<_ACEOF
++
++#
++# CONFIG_FILES section.
++#
++
++# No need to generate the scripts if there are no CONFIG_FILES.
++# This happens for instance when ./config.status config.h
++if test -n "\$CONFIG_FILES"; then
++ # Protect against being on the right side of a sed subst in config.status.
++ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
++ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
++s,@SHELL@,$SHELL,;t t
++s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
++s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
++s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
++s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
++s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
++s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
++s,@exec_prefix@,$exec_prefix,;t t
++s,@prefix@,$prefix,;t t
++s,@program_transform_name@,$program_transform_name,;t t
++s,@bindir@,$bindir,;t t
++s,@sbindir@,$sbindir,;t t
++s,@libexecdir@,$libexecdir,;t t
++s,@datadir@,$datadir,;t t
++s,@sysconfdir@,$sysconfdir,;t t
++s,@sharedstatedir@,$sharedstatedir,;t t
++s,@localstatedir@,$localstatedir,;t t
++s,@libdir@,$libdir,;t t
++s,@includedir@,$includedir,;t t
++s,@oldincludedir@,$oldincludedir,;t t
++s,@infodir@,$infodir,;t t
++s,@mandir@,$mandir,;t t
++s,@build_alias@,$build_alias,;t t
++s,@host_alias@,$host_alias,;t t
++s,@target_alias@,$target_alias,;t t
++s,@DEFS@,$DEFS,;t t
++s,@ECHO_C@,$ECHO_C,;t t
++s,@ECHO_N@,$ECHO_N,;t t
++s,@ECHO_T@,$ECHO_T,;t t
++s,@LIBS@,$LIBS,;t t
++s,@build@,$build,;t t
++s,@build_cpu@,$build_cpu,;t t
++s,@build_vendor@,$build_vendor,;t t
++s,@build_os@,$build_os,;t t
++s,@host@,$host,;t t
++s,@host_cpu@,$host_cpu,;t t
++s,@host_vendor@,$host_vendor,;t t
++s,@host_os@,$host_os,;t t
++s,@target@,$target,;t t
++s,@target_cpu@,$target_cpu,;t t
++s,@target_vendor@,$target_vendor,;t t
++s,@target_os@,$target_os,;t t
++s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
++s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
++s,@INSTALL_DATA@,$INSTALL_DATA,;t t
++s,@PACKAGE@,$PACKAGE,;t t
++s,@VERSION@,$VERSION,;t t
++s,@ACLOCAL@,$ACLOCAL,;t t
++s,@AUTOCONF@,$AUTOCONF,;t t
++s,@AUTOMAKE@,$AUTOMAKE,;t t
++s,@AUTOHEADER@,$AUTOHEADER,;t t
++s,@MAKEINFO@,$MAKEINFO,;t t
++s,@SET_MAKE@,$SET_MAKE,;t t
++s,@LIBVER_CURRENT@,$LIBVER_CURRENT,;t t
++s,@LIBVER_REVISION@,$LIBVER_REVISION,;t t
++s,@LIBVER_AGE@,$LIBVER_AGE,;t t
++s,@CC@,$CC,;t t
++s,@CFLAGS@,$CFLAGS,;t t
++s,@LDFLAGS@,$LDFLAGS,;t t
++s,@CPPFLAGS@,$CPPFLAGS,;t t
++s,@ac_ct_CC@,$ac_ct_CC,;t t
++s,@EXEEXT@,$EXEEXT,;t t
++s,@OBJEXT@,$OBJEXT,;t t
++s,@LEX@,$LEX,;t t
++s,@LEXLIB@,$LEXLIB,;t t
++s,@LEX_OUTPUT_ROOT@,$LEX_OUTPUT_ROOT,;t t
++s,@YACC@,$YACC,;t t
++s,@LN_S@,$LN_S,;t t
++s,@ECHO@,$ECHO,;t t
++s,@RANLIB@,$RANLIB,;t t
++s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
++s,@STRIP@,$STRIP,;t t
++s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
++s,@CPP@,$CPP,;t t
++s,@EGREP@,$EGREP,;t t
++s,@LIBTOOL@,$LIBTOOL,;t t
++s,@LIBTOOL_DEPS@,$LIBTOOL_DEPS,;t t
++s,@PERL@,$PERL,;t t
++s,@LIBOBJS@,$LIBOBJS,;t t
++s,@LTLIBOBJS@,$LTLIBOBJS,;t t
++CEOF
++
++_ACEOF
++
++ cat >>$CONFIG_STATUS <<\_ACEOF
++ # Split the substitutions into bite-sized pieces for seds with
++ # small command number limits, like on Digital OSF/1 and HP-UX.
++ ac_max_sed_lines=48
++ ac_sed_frag=1 # Number of current file.
++ ac_beg=1 # First line for current file.
++ ac_end=$ac_max_sed_lines # Line after last line for current file.
++ ac_more_lines=:
++ ac_sed_cmds=
++ while $ac_more_lines; do
++ if test $ac_beg -gt 1; then
++ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
++ else
++ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
++ fi
++ if test ! -s $tmp/subs.frag; then
++ ac_more_lines=false
++ else
++ # The purpose of the label and of the branching condition is to
++ # speed up the sed processing (if there are no `@' at all, there
++ # is no need to browse any of the substitutions).
++ # These are the two extra sed commands mentioned above.
++ (echo ':t
++ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
++ if test -z "$ac_sed_cmds"; then
++ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
++ else
++ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
++ fi
++ ac_sed_frag=`expr $ac_sed_frag + 1`
++ ac_beg=$ac_end
++ ac_end=`expr $ac_end + $ac_max_sed_lines`
++ fi
++ done
++ if test -z "$ac_sed_cmds"; then
++ ac_sed_cmds=cat
++ fi
++fi # test -n "$CONFIG_FILES"
++
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+- case "$ac_file" in
+- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+- *) ac_file_in="${ac_file}.in" ;;
+- esac
+-
+- # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+-
+- # Remove last slash and all that follows it. Not all systems have dirname.
+- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+- # The file is in a subdirectory.
+- test ! -d "$ac_dir" && mkdir "$ac_dir"
+- ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+- # A "../" for each directory in $ac_dir_suffix.
+- ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+- else
+- ac_dir_suffix= ac_dots=
+- fi
+-
+- case "$ac_given_srcdir" in
+- .) srcdir=.
+- if test -z "$ac_dots"; then top_srcdir=.
+- else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+- /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
++ case $ac_file in
++ - | *:- | *:-:* ) # input from stdin
++ cat >$tmp/stdin
++ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ * ) ac_file_in=$ac_file.in ;;
++ esac
++
++ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
++ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_file" : 'X\(//\)[^/]' \| \
++ X"$ac_file" : 'X\(//\)$' \| \
++ X"$ac_file" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$ac_file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ { if $as_mkdir_p; then
++ mkdir -p "$ac_dir"
++ else
++ as_dir="$ac_dir"
++ as_dirs=
++ while test ! -d "$as_dir"; do
++ as_dirs="$as_dir $as_dirs"
++ as_dir=`(dirname "$as_dir") 2>/dev/null ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ done
++ test ! -n "$as_dirs" || mkdir $as_dirs
++ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
++echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
++ { (exit 1); exit 1; }; }; }
++
++ ac_builddir=.
++
++if test "$ac_dir" != .; then
++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
++ # A "../" for each directory in $ac_dir_suffix.
++ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
++else
++ ac_dir_suffix= ac_top_builddir=
++fi
++
++case $srcdir in
++ .) # No --srcdir option. We are building in place.
++ ac_srcdir=.
++ if test -z "$ac_top_builddir"; then
++ ac_top_srcdir=.
++ else
++ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
++ fi ;;
++ [\\/]* | ?:[\\/]* ) # Absolute path.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+- srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+- top_srcdir="$ac_dots$ac_given_srcdir" ;;
++ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_builddir$srcdir ;;
++esac
++# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
++# absolute.
++ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
++ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
++ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
++ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
++
++
++ case $INSTALL in
++ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
++ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+- case "$ac_given_INSTALL" in
+- [/$]*) INSTALL="$ac_given_INSTALL" ;;
+- *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+- esac
+-
+- echo creating "$ac_file"
+- rm -f "$ac_file"
+- configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+- case "$ac_file" in
+- *Makefile*) ac_comsub="1i\\
+-# $configure_input" ;;
+- *) ac_comsub= ;;
+- esac
+-
+- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+- sed -e "$ac_comsub
+-s%@configure_input@%$configure_input%g
+-s%@srcdir@%$srcdir%g
+-s%@top_srcdir@%$top_srcdir%g
+-s%@INSTALL@%$INSTALL%g
+-" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+-fi; done
+-rm -f conftest.s*
++ if test x"$ac_file" != x-; then
++ { echo "$as_me:$LINENO: creating $ac_file" >&5
++echo "$as_me: creating $ac_file" >&6;}
++ rm -f "$ac_file"
++ fi
++ # Let's still pretend it is `configure' which instantiates (i.e., don't
++ # use $as_me), people would be surprised to read:
++ # /* config.h. Generated by config.status. */
++ if test x"$ac_file" = x-; then
++ configure_input=
++ else
++ configure_input="$ac_file. "
++ fi
++ configure_input=$configure_input"Generated from `echo $ac_file_in |
++ sed 's,.*/,,'` by configure."
++
++ # First look for the input files in the build tree, otherwise in the
++ # src tree.
++ ac_file_inputs=`IFS=:
++ for f in $ac_file_in; do
++ case $f in
++ -) echo $tmp/stdin ;;
++ [\\/$]*)
++ # Absolute (can't be DOS-style, as IFS=:)
++ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ echo $f;;
++ *) # Relative
++ if test -f "$f"; then
++ # Build tree
++ echo $f
++ elif test -f "$srcdir/$f"; then
++ # Source tree
++ echo $srcdir/$f
++ else
++ # /dev/null tree
++ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ fi;;
++ esac
++ done` || { (exit 1); exit 1; }
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF
++ sed "$ac_vpsub
++$extrasub
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++:t
++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
++s,@configure_input@,$configure_input,;t t
++s,@srcdir@,$ac_srcdir,;t t
++s,@abs_srcdir@,$ac_abs_srcdir,;t t
++s,@top_srcdir@,$ac_top_srcdir,;t t
++s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
++s,@builddir@,$ac_builddir,;t t
++s,@abs_builddir@,$ac_abs_builddir,;t t
++s,@top_builddir@,$ac_top_builddir,;t t
++s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
++s,@INSTALL@,$ac_INSTALL,;t t
++" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
++ rm -f $tmp/stdin
++ if test x"$ac_file" != x-; then
++ mv $tmp/out $ac_file
++ else
++ cat $tmp/out
++ rm -f $tmp/out
++ fi
++
++done
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++
++#
++# CONFIG_HEADER section.
++#
+
+ # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
+ # NAME is the cpp macro being defined and VALUE is the value it is being given.
+ #
+ # ac_d sets the value in "#define NAME VALUE" lines.
+-ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
+-ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
+-ac_dC='\3'
+-ac_dD='%g'
+-# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
+-ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+-ac_uB='\([ ]\)%\1#\2define\3'
++ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)'
++ac_dB='[ ].*$,\1#\2'
++ac_dC=' '
++ac_dD=',;t'
++# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
++ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
++ac_uB='$,\1#\2define\3'
+ ac_uC=' '
+-ac_uD='\4%g'
+-# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
+-ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
+-ac_eB='$%\1#\2define\3'
+-ac_eC=' '
+-ac_eD='%g'
++ac_uD=',;t'
+
+-if test "${CONFIG_HEADERS+set}" != set; then
+-EOF
+-cat >> $CONFIG_STATUS <<EOF
+- CONFIG_HEADERS="config.h"
+-EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-fi
+-for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
++for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+- case "$ac_file" in
+- *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+- ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+- *) ac_file_in="${ac_file}.in" ;;
++ case $ac_file in
++ - | *:- | *:-:* ) # input from stdin
++ cat >$tmp/stdin
++ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+- echo creating $ac_file
+-
+- rm -f conftest.frag conftest.in conftest.out
+- ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+- cat $ac_file_inputs > conftest.in
+-
+-EOF
++ test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
++echo "$as_me: creating $ac_file" >&6;}
+
+-# Transform confdefs.h into a sed script conftest.vals that substitutes
+-# the proper values into config.h.in to produce config.h. And first:
+-# Protect against being on the right side of a sed subst in config.status.
+-# Protect against being in an unquoted here document in config.status.
+-rm -f conftest.vals
+-cat > conftest.hdr <<\EOF
+-s/[\\&%]/\\&/g
+-s%[\\$`]%\\&%g
+-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
+-s%ac_d%ac_u%gp
+-s%ac_u%ac_e%gp
+-EOF
+-sed -n -f conftest.hdr confdefs.h > conftest.vals
+-rm -f conftest.hdr
++ # First look for the input files in the build tree, otherwise in the
++ # src tree.
++ ac_file_inputs=`IFS=:
++ for f in $ac_file_in; do
++ case $f in
++ -) echo $tmp/stdin ;;
++ [\\/$]*)
++ # Absolute (can't be DOS-style, as IFS=:)
++ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ echo $f;;
++ *) # Relative
++ if test -f "$f"; then
++ # Build tree
++ echo $f
++ elif test -f "$srcdir/$f"; then
++ # Source tree
++ echo $srcdir/$f
++ else
++ # /dev/null tree
++ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
++echo "$as_me: error: cannot find input file: $f" >&2;}
++ { (exit 1); exit 1; }; }
++ fi;;
++ esac
++ done` || { (exit 1); exit 1; }
++ # Remove the trailing spaces.
++ sed 's/[ ]*$//' $ac_file_inputs >$tmp/in
++
++_ACEOF
++
++# Transform confdefs.h into two sed scripts, `conftest.defines' and
++# `conftest.undefs', that substitutes the proper values into
++# config.h.in to produce config.h. The first handles `#define'
++# templates, and the second `#undef' templates.
++# And first: Protect against being on the right side of a sed subst in
++# config.status. Protect against being in an unquoted here document
++# in config.status.
++rm -f conftest.defines conftest.undefs
++# Using a here document instead of a string reduces the quoting nightmare.
++# Putting comments in sed scripts is not portable.
++#
++# `end' is used to avoid that the second main sed command (meant for
++# 0-ary CPP macros) applies to n-ary macro definitions.
++# See the Autoconf documentation for `clear'.
++cat >confdef2sed.sed <<\_ACEOF
++s/[\\&,]/\\&/g
++s,[\\$`],\\&,g
++t clear
++: clear
++s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
++t end
++s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
++: end
++_ACEOF
++# If some macros were called several times there might be several times
++# the same #defines, which is useless. Nevertheless, we may not want to
++# sort them, since we want the *last* AC-DEFINE to be honored.
++uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
++sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
++rm -f confdef2sed.sed
+
+ # This sed command replaces #undef with comments. This is necessary, for
+ # example, in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+-cat >> conftest.vals <<\EOF
+-s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
+-EOF
+-
+-# Break up conftest.vals because some shells have a limit on
+-# the size of here documents, and old seds have small limits too.
+-
++cat >>conftest.undefs <<\_ACEOF
++s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
++_ACEOF
++
++# Break up conftest.defines because some shells have a limit on the size
++# of here documents, and old seds have small limits too (100 cmds).
++echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
++echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
++echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
++echo ' :' >>$CONFIG_STATUS
++rm -f conftest.tail
++while grep . conftest.defines >/dev/null
++do
++ # Write a limited-size here document to $tmp/defines.sed.
++ echo ' cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
++ # Speed up: don't consider the non `#define' lines.
++ echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS
++ # Work around the forget-to-reset-the-flag bug.
++ echo 't clr' >>$CONFIG_STATUS
++ echo ': clr' >>$CONFIG_STATUS
++ sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
++ echo 'CEOF
++ sed -f $tmp/defines.sed $tmp/in >$tmp/out
++ rm -f $tmp/in
++ mv $tmp/out $tmp/in
++' >>$CONFIG_STATUS
++ sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
++ rm -f conftest.defines
++ mv conftest.tail conftest.defines
++done
++rm -f conftest.defines
++echo ' fi # grep' >>$CONFIG_STATUS
++echo >>$CONFIG_STATUS
++
++# Break up conftest.undefs because some shells have a limit on the size
++# of here documents, and old seds have small limits too (100 cmds).
++echo ' # Handle all the #undef templates' >>$CONFIG_STATUS
+ rm -f conftest.tail
+-while :
++while grep . conftest.undefs >/dev/null
+ do
+- ac_lines=`grep -c . conftest.vals`
+- # grep -c gives empty output for an empty file on some AIX systems.
+- if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
+- # Write a limited-size here document to conftest.frag.
+- echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
+- sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
++ # Write a limited-size here document to $tmp/undefs.sed.
++ echo ' cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
++ # Speed up: don't consider the non `#undef'
++ echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS
++ # Work around the forget-to-reset-the-flag bug.
++ echo 't clr' >>$CONFIG_STATUS
++ echo ': clr' >>$CONFIG_STATUS
++ sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
+ echo 'CEOF
+- sed -f conftest.frag conftest.in > conftest.out
+- rm -f conftest.in
+- mv conftest.out conftest.in
+-' >> $CONFIG_STATUS
+- sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
+- rm -f conftest.vals
+- mv conftest.tail conftest.vals
+-done
+-rm -f conftest.vals
+-
+-cat >> $CONFIG_STATUS <<\EOF
+- rm -f conftest.frag conftest.h
+- echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
+- cat conftest.in >> conftest.h
+- rm -f conftest.in
+- if cmp -s $ac_file conftest.h 2>/dev/null; then
+- echo "$ac_file is unchanged"
+- rm -f conftest.h
+- else
+- # Remove last slash and all that follows it. Not all systems have dirname.
+- ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+- if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+- # The file is in a subdirectory.
+- test ! -d "$ac_dir" && mkdir "$ac_dir"
++ sed -f $tmp/undefs.sed $tmp/in >$tmp/out
++ rm -f $tmp/in
++ mv $tmp/out $tmp/in
++' >>$CONFIG_STATUS
++ sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
++ rm -f conftest.undefs
++ mv conftest.tail conftest.undefs
++done
++rm -f conftest.undefs
++
++cat >>$CONFIG_STATUS <<\_ACEOF
++ # Let's still pretend it is `configure' which instantiates (i.e., don't
++ # use $as_me), people would be surprised to read:
++ # /* config.h. Generated by config.status. */
++ if test x"$ac_file" = x-; then
++ echo "/* Generated by configure. */" >$tmp/config.h
++ else
++ echo "/* $ac_file. Generated by configure. */" >$tmp/config.h
++ fi
++ cat $tmp/in >>$tmp/config.h
++ rm -f $tmp/in
++ if test x"$ac_file" != x-; then
++ if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
++ { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
++echo "$as_me: $ac_file is unchanged" >&6;}
++ else
++ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
++$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_file" : 'X\(//\)[^/]' \| \
++ X"$ac_file" : 'X\(//\)$' \| \
++ X"$ac_file" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$ac_file" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ { if $as_mkdir_p; then
++ mkdir -p "$ac_dir"
++ else
++ as_dir="$ac_dir"
++ as_dirs=
++ while test ! -d "$as_dir"; do
++ as_dirs="$as_dir $as_dirs"
++ as_dir=`(dirname "$as_dir") 2>/dev/null ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ done
++ test ! -n "$as_dirs" || mkdir $as_dirs
++ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
++echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
++ { (exit 1); exit 1; }; }; }
++
++ rm -f $ac_file
++ mv $tmp/config.h $ac_file
+ fi
+- rm -f $ac_file
+- mv conftest.h $ac_file
++ else
++ cat $tmp/config.h
++ rm -f $tmp/config.h
+ fi
+-fi; done
++done
++_ACEOF
++cat >>$CONFIG_STATUS <<\_ACEOF
+
+-EOF
+-cat >> $CONFIG_STATUS <<EOF
++#
++# CONFIG_COMMANDS section.
++#
++for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
++ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
++ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
++$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$ac_dest" : 'X\(//\)[^/]' \| \
++ X"$ac_dest" : 'X\(//\)$' \| \
++ X"$ac_dest" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$ac_dest" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ ac_builddir=.
++
++if test "$ac_dir" != .; then
++ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
++ # A "../" for each directory in $ac_dir_suffix.
++ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
++else
++ ac_dir_suffix= ac_top_builddir=
++fi
++
++case $srcdir in
++ .) # No --srcdir option. We are building in place.
++ ac_srcdir=.
++ if test -z "$ac_top_builddir"; then
++ ac_top_srcdir=.
++ else
++ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
++ fi ;;
++ [\\/]* | ?:[\\/]* ) # Absolute path.
++ ac_srcdir=$srcdir$ac_dir_suffix;
++ ac_top_srcdir=$srcdir ;;
++ *) # Relative path.
++ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
++ ac_top_srcdir=$ac_top_builddir$srcdir ;;
++esac
++# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
++# absolute.
++ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
++ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
++ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
++ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
+
+
+-EOF
+-cat >> $CONFIG_STATUS <<\EOF
+-test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
++ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
++echo "$as_me: executing $ac_dest commands" >&6;}
++ case $ac_dest in
++ default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;;
++ esac
++done
++_ACEOF
+
+-exit 0
+-EOF
++cat >>$CONFIG_STATUS <<\_ACEOF
++
++{ (exit 0); exit 0; }
++_ACEOF
+ chmod +x $CONFIG_STATUS
+-rm -fr confdefs* $ac_clean_files
+-test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
++ac_clean_files=$ac_clean_files_save
++
++
++# configure is writing to config.log, and then calls config.status.
++# config.status does its own redirection, appending to config.log.
++# Unfortunately, on DOS this fails, as config.log is still kept open
++# by configure, so config.status won't be able to write to it; its
++# output is simply discarded. So we exec the FD to /dev/null,
++# effectively closing config.log, so it can be properly (re)opened and
++# appended to by config.status. When coming back to configure, we
++# need to make the FD available again.
++if test "$no_create" != yes; then
++ ac_cs_success=:
++ ac_config_status_args=
++ test "$silent" = yes &&
++ ac_config_status_args="$ac_config_status_args --quiet"
++ exec 5>/dev/null
++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
++ exec 5>>config.log
++ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
++ # would make configure fail if this is the last instruction.
++ $ac_cs_success || { (exit 1); exit 1; }
++fi
+
+
+--- linux-atm-2.4.1.orig/ltmain.sh
++++ linux-atm-2.4.1/ltmain.sh
+@@ -49,14 +49,14 @@
+ fi
+
+ # The name of this program.
+-progname=`$echo "$0" | sed 's%^.*/%%'`
++progname=`$echo "$0" | ${SED} 's%^.*/%%'`
+ modename="$progname"
+
+ # Constants.
+ PROGRAM=ltmain.sh
+ PACKAGE=libtool
+-VERSION=1.4
+-TIMESTAMP=" (1.920 2001/04/24 23:26:18)"
++VERSION=1.4.3
++TIMESTAMP=" (1.922.2.111 2002/10/23 02:54:36)"
+
+ default_mode=
+ help="Try \`$progname --help' for more information."
+@@ -67,10 +67,19 @@
+
+ # Sed substitution that helps us do robust quoting. It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e 1s/^X//'
++Xsed="${SED}"' -e 1s/^X//'
+ sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+-SP2NL='tr \040 \012'
+-NL2SP='tr \015\012 \040\040'
++# test EBCDIC or ASCII
++case `echo A|od -x` in
++ *[Cc]1*) # EBCDIC based system
++ SP2NL="tr '\100' '\n'"
++ NL2SP="tr '\r\n' '\100\100'"
++ ;;
++ *) # Assume ASCII based system
++ SP2NL="tr '\040' '\012'"
++ NL2SP="tr '\015\012' '\040\040'"
++ ;;
++esac
+
+ # NLS nuisances.
+ # Only set LANG and LC_ALL to C if already set.
+@@ -84,6 +93,9 @@
+ save_LANG="$LANG"; LANG=C; export LANG
+ fi
+
++# Make sure IFS has a sensible default
++: ${IFS=" "}
++
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ echo "$modename: not configured to build any kind of library" 1>&2
+ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
+@@ -141,7 +153,7 @@
+ ;;
+
+ --config)
+- sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
++ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+ exit 0
+ ;;
+
+@@ -174,6 +186,8 @@
+ --mode) prevopt="--mode" prev=mode ;;
+ --mode=*) mode="$optarg" ;;
+
++ --preserve-dup-deps) duplicate_deps="yes" ;;
++
+ --quiet | --silent)
+ show=:
+ ;;
+@@ -202,12 +216,17 @@
+ exit 1
+ fi
+
++# If this variable is set in any of the actions, the command in it
++# will be execed at the end. This prevents here-documents from being
++# left over by shells.
++exec_cmd=
++
+ if test -z "$show_help"; then
+
+ # Infer the operation mode.
+ if test -z "$mode"; then
+ case $nonopt in
+- *cc | *++ | gcc* | *-gcc*)
++ *cc | *++ | gcc* | *-gcc* | g++* | xlc*)
+ mode=link
+ for arg
+ do
+@@ -329,7 +348,7 @@
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+ lastarg=
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
++ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+
+@@ -615,6 +634,10 @@
+ # Now arrange that obj and lo_libobj become the same file
+ $show "(cd $xdir && $LN_S $baseobj $libobj)"
+ if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
++ # Unlock the critical section if it was locked
++ if test "$need_locks" != no; then
++ $run $rm "$lockfile"
++ fi
+ exit 0
+ else
+ error=$?
+@@ -745,6 +768,7 @@
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
++ inst_prefix_dir=
+
+ avoid_version=no
+ dlfiles=
+@@ -875,6 +899,11 @@
+ prev=
+ continue
+ ;;
++ inst_prefix)
++ inst_prefix_dir="$arg"
++ prev=
++ continue
++ ;;
+ release)
+ release="-$arg"
+ prev=
+@@ -976,11 +1005,16 @@
+ continue
+ ;;
+
++ -inst-prefix-dir)
++ prev=inst_prefix
++ continue
++ ;;
++
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+- no/*-*-irix*)
++ no/*-*-irix* | no/*-*-nonstopux*)
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ ;;
+@@ -1031,6 +1065,17 @@
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
++ *-*-openbsd* | *-*-freebsd*)
++ # Do not include libc due to us having libc/libc_r.
++ test "X$arg" = "X-lc" && continue
++ ;;
++ esac
++ elif test "X$arg" = "X-lc_r"; then
++ case $host in
++ *-*-openbsd* | *-*-freebsd*)
++ # Do not include libc_r directly, use -pthread flag.
++ continue
++ ;;
+ esac
+ fi
+ deplibs="$deplibs $arg"
+@@ -1122,7 +1167,7 @@
+ -Wc,*)
+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+ arg=
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
++ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ case $flag in
+@@ -1140,7 +1185,7 @@
+ -Wl,*)
+ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+ arg=
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
++ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ case $flag in
+@@ -1307,9 +1352,11 @@
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+- case "$libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
++ if test "X$duplicate_deps" = "Xyes" ; then
++ case "$libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ fi
+ libs="$libs $deplib"
+ done
+ deplibs=
+@@ -1343,7 +1390,7 @@
+ ;;
+ esac
+ for pass in $passes; do
+- if test "$linkmode" = prog; then
++ if test $linkmode = prog; then
+ # Determine which files to process
+ case $pass in
+ dlopen)
+@@ -1360,11 +1407,11 @@
+ found=no
+ case $deplib in
+ -l*)
+- if test "$linkmode" = oldlib && test "$linkmode" = obj; then
++ if test $linkmode = oldlib && test $linkmode = obj; then
+ $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
+ continue
+ fi
+- if test "$pass" = conv; then
++ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+@@ -1384,7 +1431,7 @@
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++ test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+@@ -1393,16 +1440,16 @@
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+- test "$pass" = conv && continue
++ test $pass = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ ;;
+ prog)
+- if test "$pass" = conv; then
++ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+- if test "$pass" = scan; then
++ if test $pass = scan; then
+ deplibs="$deplib $deplibs"
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+ else
+@@ -1417,7 +1464,7 @@
+ continue
+ ;; # -L
+ -R*)
+- if test "$pass" = link; then
++ if test $pass = link; then
+ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+@@ -1430,7 +1477,7 @@
+ ;;
+ *.la) lib="$deplib" ;;
+ *.$libext)
+- if test "$pass" = conv; then
++ if test $pass = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+@@ -1438,10 +1485,12 @@
+ lib)
+ if test "$deplibs_check_method" != pass_all; then
+ echo
+- echo "*** Warning: This library needs some functionality provided by $deplib."
++ echo "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have."
++ echo "*** shared version of the library, which you do not appear to have"
++ echo "*** because the file extensions .$libext of this argument makes me believe"
++ echo "*** that it is just a static archive that I should not used here."
+ else
+ echo
+ echo "*** Warning: Linking the shared library $output against the"
+@@ -1451,7 +1500,7 @@
+ continue
+ ;;
+ prog)
+- if test "$pass" != link; then
++ if test $pass != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+@@ -1462,7 +1511,7 @@
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ newdlprefiles="$newdlprefiles $deplib"
+@@ -1485,7 +1534,7 @@
+ fi
+
+ # Check to see that this really is a libtool archive.
+- if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit 1
+@@ -1512,13 +1561,13 @@
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+- { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then
++ { test $linkmode = oldlib && test $linkmode = obj; }; then
+ # Add dl[pre]opened files of deplib
+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ fi
+
+- if test "$pass" = conv; then
++ if test $pass = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+@@ -1532,12 +1581,14 @@
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
++ if test "X$duplicate_deps" = "Xyes" ; then
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ fi
+ tmp_libs="$tmp_libs $deplib"
+ done
+- elif test "$linkmode" != prog && test "$linkmode" != lib; then
++ elif test $linkmode != prog && test $linkmode != lib; then
+ $echo "$modename: \`$lib' is not a convenience library" 1>&2
+ exit 1
+ fi
+@@ -1555,7 +1606,7 @@
+ fi
+
+ # This library was specified with -dlopen.
+- if test "$pass" = dlopen; then
++ if test $pass = dlopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+ exit 1
+@@ -1604,7 +1655,7 @@
+ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+ # This library was specified with -dlpreopen.
+- if test "$pass" = dlpreopen; then
++ if test $pass = dlpreopen; then
+ if test -z "$libdir"; then
+ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+ exit 1
+@@ -1623,7 +1674,7 @@
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+- if test "$linkmode" = lib; then
++ if test $linkmode = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+@@ -1634,7 +1685,7 @@
+ continue
+ fi
+
+- if test "$linkmode" = prog && test "$pass" != link; then
++ if test $linkmode = prog && test $pass != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+
+@@ -1657,9 +1708,11 @@
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
++ if test "X$duplicate_deps" = "Xyes" ; then
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ fi
+ tmp_libs="$tmp_libs $deplib"
+ done # for deplib
+ continue
+@@ -1671,7 +1724,7 @@
+ # Link against this shared library
+
+ if test "$linkmode,$pass" = "prog,link" ||
+- { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then
++ { test $linkmode = lib && test $hardcode_into_libs = yes; }; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+@@ -1693,7 +1746,7 @@
+ esac
+ ;;
+ esac
+- if test "$linkmode" = prog; then
++ if test $linkmode = prog; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var"; then
+ # Make sure the rpath contains only unique directories.
+@@ -1743,14 +1796,14 @@
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+- soname=`echo $soroot | sed -e 's/^.*\///'`
+- newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
++ soname=`echo $soroot | ${SED} -e 's/^.*\///'`
++ newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ $show "extracting exported symbol list from \`$soname'"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ eval cmds=\"$extract_expsyms_cmds\"
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+@@ -1763,7 +1816,7 @@
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ $show "generating import library for \`$soname'"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ eval cmds=\"$old_archive_from_expsyms_cmds\"
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+@@ -1777,7 +1830,7 @@
+ linklib=$newlib
+ fi # test -n $old_archive_from_expsyms_cmds
+
+- if test "$linkmode" = prog || test "$mode" != relink; then
++ if test $linkmode = prog || test "$mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+@@ -1804,6 +1857,14 @@
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
++ # Try looking first in the location we're being installed to.
++ if test -n "$inst_prefix_dir"; then
++ case "$libdir" in
++ [\/]*)
++ add_dir="-L$inst_prefix_dir$libdir $add_dir"
++ ;;
++ esac
++ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+@@ -1826,7 +1887,7 @@
+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ esac
+ fi
+- if test "$linkmode" = prog; then
++ if test $linkmode = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+@@ -1843,7 +1904,7 @@
+ fi
+ fi
+
+- if test "$linkmode" = prog || test "$mode" = relink; then
++ if test $linkmode = prog || test "$mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+@@ -1862,10 +1923,18 @@
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
++ # Try looking first in the location we're being installed to.
++ if test -n "$inst_prefix_dir"; then
++ case "$libdir" in
++ [\/]*)
++ add_dir="-L$inst_prefix_dir$libdir $add_dir"
++ ;;
++ esac
++ fi
+ add="-l$name"
+ fi
+
+- if test "$linkmode" = prog; then
++ if test $linkmode = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+@@ -1873,7 +1942,7 @@
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+- elif test "$linkmode" = prog; then
++ elif test $linkmode = prog; then
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+@@ -1903,25 +1972,26 @@
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+- echo "*** Warning: This library needs some functionality provided by $lib."
++ echo "*** Warning: This system can not link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+- echo "*** Therefore, libtool will create a static module, that should work "
+- echo "*** as long as the dlopening application is linked with the -dlopen flag."
++ echo "*** But as you try to build a module library, libtool will still create "
++ echo "*** a static module, that should work as long as the dlopening application"
++ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+- echo
+- echo "*** However, this would only work if libtool was able to extract symbol"
+- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+- echo "*** not find such a program. So, this module is probably useless."
+- echo "*** \`nm' from GNU binutils and a full rebuild may help."
++ echo
++ echo "*** However, this would only work if libtool was able to extract symbol"
++ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++ echo "*** not find such a program. So, this module is probably useless."
++ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+- build_libtool_libs=module
+- build_old_libs=yes
++ build_libtool_libs=module
++ build_old_libs=yes
+ else
+- build_libtool_libs=no
++ build_libtool_libs=no
+ fi
+ fi
+ else
+@@ -1932,9 +2002,9 @@
+ fi
+ fi # link shared/static library?
+
+- if test "$linkmode" = lib; then
++ if test $linkmode = lib; then
+ if test -n "$dependency_libs" &&
+- { test "$hardcode_into_libs" != yes || test $build_old_libs = yes ||
++ { test $hardcode_into_libs != yes || test $build_old_libs = yes ||
+ test $link_static = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+@@ -1958,13 +2028,15 @@
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+- case "$tmp_libs " in
+- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+- esac
++ if test "X$duplicate_deps" = "Xyes" ; then
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ fi
+ tmp_libs="$tmp_libs $deplib"
+ done
+
+- if test "$link_all_deplibs" != no; then
++ if test $link_all_deplibs != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ case $deplib in
+@@ -1986,7 +2058,7 @@
+ if grep "^installed=no" $deplib > /dev/null; then
+ path="-L$absdir/$objdir"
+ else
+- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+ exit 1
+@@ -2007,15 +2079,15 @@
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+- if test "$pass" = dlpreopen; then
++ if test $pass = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+- if test "$pass" != dlopen; then
+- test "$pass" != scan && dependency_libs="$newdependency_libs"
+- if test "$pass" != conv; then
++ if test $pass != dlopen; then
++ test $pass != scan && dependency_libs="$newdependency_libs"
++ if test $pass != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+@@ -2073,7 +2145,7 @@
+ deplibs=
+ fi
+ done # for pass
+- if test "$linkmode" = prog; then
++ if test $linkmode = prog; then
+ dlfiles="$newdlfiles"
+ dlprefiles="$newdlprefiles"
+ fi
+@@ -2175,7 +2247,7 @@
+ else
+
+ # Parse the version information argument.
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
++ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ IFS="$save_ifs"
+
+@@ -2250,16 +2322,21 @@
+ versuffix=".$current";
+ ;;
+
+- irix)
++ irix | nonstopux)
+ major=`expr $current - $age + 1`
+- verstring="sgi$major.$revision"
++
++ case $version_type in
++ nonstopux) verstring_prefix=nonstopux ;;
++ *) verstring_prefix=sgi ;;
++ esac
++ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test $loop != 0; do
+ iface=`expr $revision - $loop`
+ loop=`expr $loop - 1`
+- verstring="sgi$major.$iface:$verstring"
++ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+@@ -2273,7 +2350,7 @@
+ ;;
+
+ osf)
+- major=`expr $current - $age`
++ major=.`expr $current - $age`
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+@@ -2312,6 +2389,16 @@
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ verstring="0.0"
++ case $version_type in
++ darwin)
++ # we can't check for "0.0" in archive_cmds due to quoting
++ # problems, so we reset it completely
++ verstring=""
++ ;;
++ *)
++ verstring="0.0"
++ ;;
++ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+@@ -2355,9 +2442,9 @@
+
+ # Eliminate all temporary directories.
+ for path in $notinst_path; do
+- lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
+- deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
+- dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
++ lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
++ deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
++ dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
+ done
+
+ if test -n "$xrpath"; then
+@@ -2408,9 +2495,12 @@
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
++ *-*-openbsd* | *-*-freebsd*)
++ # Do not include libc due to us having libc/libc_r.
++ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+- if test "$build_libtool_need_lc" = "yes"; then
++ if test $build_libtool_need_lc = "yes"; then
+ deplibs="$deplibs -lc"
+ fi
+ ;;
+@@ -2466,18 +2556,20 @@
+ else
+ droppeddeps=yes
+ echo
+- echo "*** Warning: This library needs some functionality provided by $i."
++ echo "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have."
++ echo "*** shared version of the library, which I believe you do not have"
++ echo "*** because a test_compile did reveal that the linker did not use it for"
++ echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ else
+ newdeplibs="$newdeplibs $i"
+ fi
+ done
+ else
+- # Error occured in the first compile. Let's try to salvage the situation:
+- # Compile a seperate program for each library.
++ # Error occured in the first compile. Let's try to salvage
++ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ name="`expr $i : '-l\(.*\)'`"
+ # If $name is empty we are operating on a -L argument.
+@@ -2496,10 +2588,12 @@
+ else
+ droppeddeps=yes
+ echo
+- echo "*** Warning: This library needs some functionality provided by $i."
++ echo "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have."
++ echo "*** shared version of the library, which you do not appear to have"
++ echo "*** because a test_compile did reveal that the linker did not use this one"
++ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ else
+ droppeddeps=yes
+@@ -2538,14 +2632,14 @@
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+- potliblink=`ls -ld $potlib | sed 's/.* -> //'`
++ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+- | sed 10q \
++ | ${SED} 10q \
+ | egrep "$file_magic_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+@@ -2556,10 +2650,17 @@
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+- echo "*** Warning: This library needs some functionality provided by $a_deplib."
++ echo "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have."
++ echo "*** shared version of the library, which you do not appear to have"
++ echo "*** because I did check the linker path looking for a file starting"
++ if test -z "$potlib" ; then
++ echo "*** with $libname but no candidates were found. (...for file magic test)"
++ else
++ echo "*** with $libname and none of the candidates passed a file format test"
++ echo "*** using a file magic. Last file checked: $potlib"
++ fi
+ fi
+ else
+ # Add a -L argument.
+@@ -2578,8 +2679,9 @@
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
++ potlib="$potent_lib" # see symlink-check below in file_magic test
+ if eval echo \"$potent_lib\" 2>/dev/null \
+- | sed 10q \
++ | ${SED} 10q \
+ | egrep "$match_pattern_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+@@ -2590,10 +2692,17 @@
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+- echo "*** Warning: This library needs some functionality provided by $a_deplib."
++ echo "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+- echo "*** shared version of the library, which you do not appear to have."
++ echo "*** shared version of the library, which you do not appear to have"
++ echo "*** because I did check the linker path looking for a file starting"
++ if test -z "$potlib" ; then
++ echo "*** with $libname but no candidates were found. (...for regex pattern test)"
++ else
++ echo "*** with $libname and none of the candidates passed a file format test"
++ echo "*** using a regex pattern. Last file checked: $potlib"
++ fi
+ fi
+ else
+ # Add a -L argument.
+@@ -2683,7 +2792,7 @@
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+- if test "$hardcode_into_libs" = yes; then
++ if test $hardcode_into_libs = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+@@ -2784,7 +2893,7 @@
+ export_symbols="$output_objdir/$libname.exp"
+ $run $rm $export_symbols
+ eval cmds=\"$export_symbols_cmds\"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -2858,9 +2967,20 @@
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval cmds=\"$archive_expsym_cmds\"
+ else
++ save_deplibs="$deplibs"
++ for conv in $convenience; do
++ tmp_deplibs=
++ for test_deplib in $deplibs; do
++ if test "$test_deplib" != "$conv"; then
++ tmp_deplibs="$tmp_deplibs $test_deplib"
++ fi
++ done
++ deplibs="$tmp_deplibs"
++ done
+ eval cmds=\"$archive_cmds\"
++ deplibs="$save_deplibs"
+ fi
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -2988,7 +3108,7 @@
+
+ output="$obj"
+ eval cmds=\"$reload_cmds\"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -3024,7 +3144,7 @@
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ eval cmds=\"$reload_cmds\"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -3057,7 +3177,7 @@
+
+ prog)
+ case $host in
+- *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
++ *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+ esac
+ if test -n "$vinfo"; then
+ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+@@ -3079,6 +3199,13 @@
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ case $host in
++ *darwin*)
++ # Don't allow lazy linking, it breaks C++ global constructors
++ compile_command="$compile_command ${wl}-bind_at_load"
++ finalize_command="$finalize_command ${wl}-bind_at_load"
++ ;;
++ esac
+ ;;
+ esac
+
+@@ -3245,9 +3372,9 @@
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$output.exp"
+ $run $rm $export_symbols
+- $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++ $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ else
+- $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
++ $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
+ $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+ $run eval 'mv "$nlist"T "$nlist"'
+ fi
+@@ -3255,7 +3382,7 @@
+
+ for arg in $dlprefiles; do
+ $show "extracting global C symbols from \`$arg'"
+- name=`echo "$arg" | sed -e 's%^.*/%%'`
++ name=`echo "$arg" | ${SED} -e 's%^.*/%%'`
+ $run eval 'echo ": $name " >> "$nlist"'
+ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+ done
+@@ -3270,7 +3397,13 @@
+ fi
+
+ # Try sorting and uniquifying the output.
+- if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
++ if grep -v "^: " < "$nlist" |
++ if sort -k 3 </dev/null >/dev/null 2>&1; then
++ sort -k 3
++ else
++ sort +2
++ fi |
++ uniq > "$nlist"S; then
+ :
+ else
+ grep -v "^: " < "$nlist" > "$nlist"S
+@@ -3287,27 +3420,25 @@
+ #undef lt_preloaded_symbols
+
+ #if defined (__STDC__) && __STDC__
+-# define lt_ptr_t void *
++# define lt_ptr void *
+ #else
+-# define lt_ptr_t char *
++# define lt_ptr char *
+ # define const
+ #endif
+
+ /* The mapping between symbol names and symbols. */
+ const struct {
+ const char *name;
+- lt_ptr_t address;
++ lt_ptr address;
+ }
+ lt_preloaded_symbols[] =
+ {\
+ "
+
+- sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
+- -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
+- < "$nlist" >> "$output_objdir/$dlsyms"
++ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+
+ $echo >> "$output_objdir/$dlsyms" "\
+- {0, (lt_ptr_t) 0}
++ {0, (lt_ptr) 0}
+ };
+
+ /* This works around a problem in FreeBSD linker */
+@@ -3494,7 +3625,7 @@
+ relink_command="$var=\"$var_value\"; export $var; $relink_command"
+ fi
+ done
+- relink_command="cd `pwd`; $relink_command"
++ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+@@ -3514,7 +3645,7 @@
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+- *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
++ *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+@@ -3538,7 +3669,7 @@
+
+ # Sed substitution that helps us do robust quoting. It backslashifies
+ # metacharacters that are still active within double-quoted strings.
+-Xsed='sed -e 1s/^X//'
++Xsed="${SED}"' -e 1s/^X//'
+ sed_quote_subst='$sed_quote_subst'
+
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+@@ -3576,7 +3707,7 @@
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+- file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
++ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+@@ -3589,7 +3720,7 @@
+ fi
+
+ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+- file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
++ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+ done
+
+ # Try to get the absolute directory name.
+@@ -3603,7 +3734,7 @@
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" || \\
+- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+@@ -3618,8 +3749,9 @@
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+- if (eval \$relink_command); then :
++ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
++ $echo \"\$relink_command_output\" >&2
+ $rm \"\$progdir/\$file\"
+ exit 1
+ fi
+@@ -3648,7 +3780,7 @@
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+- # The second colon is a workaround for a bug in BeOS R4 sed
++ # The second colon is a workaround for a bug in BeOS R4 ${SED}
+ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+ export $shlibpath_var
+@@ -3790,7 +3922,7 @@
+
+ eval cmds=\"$old_archive_cmds\"
+ fi
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -3823,7 +3955,7 @@
+ fi
+ done
+ # Quote the link command for shipping.
+- relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
++ relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+
+ # Only create the output if not a dry run.
+@@ -3840,7 +3972,7 @@
+ case $deplib in
+ *.la)
+ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+ exit 1
+@@ -3854,7 +3986,7 @@
+ newdlfiles=
+ for lib in $dlfiles; do
+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit 1
+@@ -3865,7 +3997,7 @@
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+- eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ if test -z "$libdir"; then
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ exit 1
+@@ -4089,7 +4221,7 @@
+
+ *.la)
+ # Check to see that this really is a libtool archive.
+- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+@@ -4124,12 +4256,30 @@
+ dir="$dir$objdir"
+
+ if test -n "$relink_command"; then
++ # Determine the prefix the user has applied to our future dir.
++ inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"`
++
++ # Don't allow the user to place us outside of our expected
++ # location b/c this prevents finding dependent libraries that
++ # are installed to the same prefix.
++ if test "$inst_prefix_dir" = "$destdir"; then
++ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
++ exit 1
++ fi
++
++ if test -n "$inst_prefix_dir"; then
++ # Stick the inst_prefix_dir data into the link command.
++ relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++ else
++ relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"`
++ fi
++
+ $echo "$modename: warning: relinking \`$file'" 1>&2
+ $show "$relink_command"
+ if $run eval "$relink_command"; then :
+ else
+ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+- continue
++ exit 1
+ fi
+ fi
+
+@@ -4165,7 +4315,7 @@
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ eval cmds=\"$postinstall_cmds\"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -4238,19 +4388,27 @@
+ fi
+
+ # Do a test to see if this is really a libtool program.
+- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ case $host in
++ *cygwin*|*mingw*)
++ wrapper=`echo $file | ${SED} -e 's,.exe$,,'`
++ ;;
++ *)
++ wrapper=$file
++ ;;
++ esac
++ if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+ notinst_deplibs=
+ relink_command=
+
+ # If there is no directory component, then add one.
+ case $file in
+- */* | *\\*) . $file ;;
+- *) . ./$file ;;
++ */* | *\\*) . $wrapper ;;
++ *) . ./$wrapper ;;
+ esac
+
+ # Check the variables that should have been set.
+ if test -z "$notinst_deplibs"; then
+- $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
++ $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+ exit 1
+ fi
+
+@@ -4275,8 +4433,8 @@
+ relink_command=
+ # If there is no directory component, then add one.
+ case $file in
+- */* | *\\*) . $file ;;
+- *) . ./$file ;;
++ */* | *\\*) . $wrapper ;;
++ *) . ./$wrapper ;;
+ esac
+
+ outputname=
+@@ -4324,7 +4482,7 @@
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+- destfile=`echo $destfile | sed -e 's,.exe$,,'`
++ destfile=`echo $destfile | ${SED} -e 's,.exe$,,'`
+ ;;
+ esac
+ ;;
+@@ -4352,7 +4510,7 @@
+
+ # Do each command in the postinstall commands.
+ eval cmds=\"$old_postinstall_cmds\"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -4368,11 +4526,10 @@
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ test -n "$run" && current_libdirs=" -n$current_libdirs"
+- exec $SHELL $0 --finish$current_libdirs
+- exit 1
++ exec_cmd='$SHELL $0 --finish$current_libdirs'
++ else
++ exit 0
+ fi
+-
+- exit 0
+ ;;
+
+ # libtool finish mode
+@@ -4391,7 +4548,7 @@
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ eval cmds=\"$finish_cmds\"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -4473,7 +4630,7 @@
+ case $file in
+ *.la)
+ # Check to see that this really is a libtool archive.
+- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+ else
+ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+ $echo "$help" 1>&2
+@@ -4544,7 +4701,7 @@
+ -*) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+- if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ # If there is no directory component, then add one.
+ case $file in
+ */* | *\\*) . $file ;;
+@@ -4575,11 +4732,8 @@
+ LANG="$save_LANG"; export LANG
+ fi
+
+- # Now actually exec the command.
+- eval "exec \$cmd$args"
+-
+- $echo "$modename: cannot exec \$cmd$args"
+- exit 1
++ # Now prepare to actually exec the command.
++ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+@@ -4641,14 +4795,14 @@
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if (test -L "$file") >/dev/null 2>&1 \
+- || (test -h "$file") >/dev/null 2>&1 \
++ || (test -h "$file") >/dev/null 2>&1 \
+ || test -f "$file"; then
+- :
++ :
+ elif test -d "$file"; then
+- exit_status=1
++ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+- continue
++ continue
+ fi
+
+ rmfiles="$file"
+@@ -4656,7 +4810,7 @@
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+- if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ . $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+@@ -4670,7 +4824,7 @@
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ eval cmds=\"$postuninstall_cmds\"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -4685,7 +4839,7 @@
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ eval cmds=\"$old_postuninstall_cmds\"
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ $show "$cmd"
+@@ -4711,7 +4865,7 @@
+ *)
+ # Do a test to see if this is a libtool program.
+ if test $mode = clean &&
+- (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+ relink_command=
+ . $dir/$file
+
+@@ -4744,11 +4898,18 @@
+ ;;
+ esac
+
+- $echo "$modename: invalid operation mode \`$mode'" 1>&2
+- $echo "$generic_help" 1>&2
+- exit 1
++ if test -z "$exec_cmd"; then
++ $echo "$modename: invalid operation mode \`$mode'" 1>&2
++ $echo "$generic_help" 1>&2
++ exit 1
++ fi
+ fi # test -z "$show_help"
+
++if test -n "$exec_cmd"; then
++ eval exec $exec_cmd
++ exit 1
++fi
++
+ # We need to display help for each of the modes.
+ case $mode in
+ "") $echo \
+--- linux-atm-2.4.1.orig/m4/Makefile.in
++++ linux-atm-2.4.1/m4/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -92,14 +92,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps m4/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -112,6 +112,11 @@
+ subdir = m4
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu m4/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/src/Makefile.in
++++ linux-atm-2.4.1/src/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -85,8 +85,7 @@
+ VERSION = @VERSION@
+ YACC = @YACC@
+
+-SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
+- mpoad switch config extra
++SUBDIRS = include lib
+
+ mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+ CONFIG_HEADER = ../config.h
+@@ -96,14 +95,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -186,7 +185,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -202,6 +201,11 @@
+ subdir = src
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/src/include/Makefile.in
++++ linux-atm-2.4.1/src/include/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -97,14 +97,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/include/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/include/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -142,7 +142,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -158,6 +158,11 @@
+ subdir = src/include
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/include/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/src/include/atmd.h
++++ linux-atm-2.4.1/src/include/atmd.h
+@@ -24,6 +24,10 @@
+ (i)->prev = (b)->prev; if ((b)->prev) (b)->prev->next = i; else r = i; \
+ (b)->prev = i; } else { (i)->next = r; (i)->prev = NULL; \
+ if (r) (r)->prev = i; r = i; } })
++#define Q_INSERT_BEFORE_TYPED(r,t,i,b) ({ if (b) { (i)->next = b; \
++ (i)->prev = (b)->prev; if ((b)->prev) (b)->prev->next = i; else r = i; \
++ (b)->prev = i; } else { (i)->next = t r; (i)->prev = NULL; \
++ if (t r) (t r)->prev = i; r = i; } })
+ #define Q_REMOVE(r,i) ({ if ((i)->next) (i)->next->prev = (i)->prev; \
+ if ((i)->prev) (i)->prev->next = (i)->next; else r = (i)->next; })
+
+--- linux-atm-2.4.1.orig/src/lib/Makefile.in
++++ linux-atm-2.4.1/src/lib/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -92,16 +92,10 @@
+ # ATMLIBS_VERSION comes from configure.in in the toplevel directory
+ LDFLAGS = -version-info @LIBVER_CURRENT@:@LIBVER_REVISION@:@LIBVER_AGE@
+
+-libatm_la_SOURCES = text2atm.c atm2text.c atmequal.c sdu2cell.c text2qos.c \
+- qos2text.c qosequal.c sap2text.c text2sap.c sapequal.c \
+- misc.c atmres.h ans.c \
+- common.c diag.c kptr.c text2ip.c timer.c unix.c
++libatm_la_SOURCES = text2atm.c atm2text.c atmequal.c sdu2cell.c text2qos.c qos2text.c qosequal.c sap2text.c text2sap.c sapequal.c misc.c atmres.h ans.c common.c diag.c kptr.c text2ip.c timer.c unix.c
+
+ libatm_la_LIBADD = -lresolv
+-libatm_la_DEPENDENCIES = $(top_builddir)/src/include/atm.h \
+- $(top_builddir)/src/include/atmsap.h \
+- $(top_builddir)/src/include/stdint.h \
+- $(top_builddir)/src/include/atmd.h
++libatm_la_DEPENDENCIES = $(top_builddir)/src/include/atm.h $(top_builddir)/src/include/atmsap.h $(top_builddir)/src/include/stdint.h $(top_builddir)/src/include/atmd.h
+
+ mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+ CONFIG_HEADER = ../../config.h
+@@ -126,8 +120,13 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/ans.P .deps/atm2text.P .deps/atmequal.P \
++.deps/common.P .deps/diag.P .deps/kptr.P .deps/misc.P .deps/qos2text.P \
++.deps/qosequal.P .deps/sap2text.P .deps/sapequal.P .deps/sdu2cell.P \
++.deps/text2atm.P .deps/text2ip.P .deps/text2qos.P .deps/text2sap.P \
++.deps/timer.P .deps/unix.P
+ SOURCES = $(libatm_la_SOURCES)
+ OBJECTS = $(libatm_la_OBJECTS)
+
+@@ -135,9 +134,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/lib/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/lib/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -167,9 +166,6 @@
+ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -192,9 +188,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -232,7 +225,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -248,6 +241,11 @@
+ subdir = src/lib
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/lib/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -258,48 +256,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-ans.lo ans.o : ans.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h atmres.h
+-atm2text.lo atm2text.o : atm2text.c ../../config.h \
+- ../../src/include/atm.h ../../src/include/stdint.h atmres.h
+-atmequal.lo atmequal.o : atmequal.c ../../config.h \
+- ../../src/include/atm.h ../../src/include/stdint.h
+-common.lo common.o : common.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atmd.h ../../src/include/atm.h
+-diag.lo diag.o : diag.c ../../config.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h
+-kptr.lo kptr.o : kptr.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h
+-misc.lo misc.o : misc.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h ../../src/include/atmsap.h
+-qos2text.lo qos2text.o : qos2text.c ../../config.h \
+- ../../src/include/atm.h ../../src/include/stdint.h
+-qosequal.lo qosequal.o : qosequal.c ../../config.h \
+- ../../src/include/atm.h ../../src/include/stdint.h
+-sap2text.lo sap2text.o : sap2text.c ../../config.h \
+- ../../src/include/atmsap.h ../../src/include/stdint.h \
+- ../../src/include/atm.h
+-sapequal.lo sapequal.o : sapequal.c ../../config.h \
+- ../../src/include/atm.h ../../src/include/stdint.h \
+- ../../src/include/atmsap.h
+-sdu2cell.lo sdu2cell.o : sdu2cell.c ../../config.h \
+- ../../src/include/atm.h ../../src/include/stdint.h
+-text2atm.lo text2atm.o : text2atm.c ../../config.h \
+- ../../src/include/atm.h ../../src/include/stdint.h \
+- ../../src/include/atmsap.h atmres.h
+-text2ip.lo text2ip.o : text2ip.c ../../config.h \
+- ../../src/include/stdint.h ../../src/include/atm.h \
+- ../../src/include/atmd.h
+-text2qos.lo text2qos.o : text2qos.c ../../config.h \
+- ../../src/include/atm.h ../../src/include/stdint.h
+-text2sap.lo text2sap.o : text2sap.c ../../config.h \
+- ../../src/include/atmsap.h ../../src/include/stdint.h \
+- ../../src/include/atm.h
+-timer.lo timer.o : timer.c ../../config.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h
+-unix.lo unix.o : unix.c ../../config.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -337,27 +325,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-libLTLIBRARIES distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-libLTLIBRARIES \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -369,12 +357,13 @@
+ distclean-compile clean-compile maintainer-clean-compile \
+ mostlyclean-libtool distclean-libtool clean-libtool \
+ maintainer-clean-libtool tags mostlyclean-tags distclean-tags \
+-clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
+-check-am installcheck-am installcheck install-exec-am install-exec \
+-install-data-am install-data install-am install uninstall-am uninstall \
+-all-redirect all-am all installdirs mostlyclean-generic \
+-distclean-generic clean-generic maintainer-clean-generic clean \
+-mostlyclean distclean maintainer-clean
++clean-tags maintainer-clean-tags distdir mostlyclean-depend \
++distclean-depend clean-depend maintainer-clean-depend info-am info \
++dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
++install-exec install-data-am install-data install-am install \
++uninstall-am uninstall all-redirect all-am all installdirs \
++mostlyclean-generic distclean-generic clean-generic \
++maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+ #libatm_la_SOURCES = text2atm.c atm2text.c atmequal.c sdu2cell.c text2qos.c \
+--- linux-atm-2.4.1.orig/src/lib/sapequal.c
++++ linux-atm-2.4.1/src/lib/sapequal.c
+@@ -65,6 +65,7 @@
+ CHECK(l2.itu.window,a.l2.itu.window > b.l2.itu.window);
+ break;
+ default:
++ break;
+ }
+ switch (a.l3_proto) {
+ case ATM_L3_X25:
+@@ -83,6 +84,7 @@
+ if (a.l3.user != b.l3.user) return 0;
+ break;
+ default:
++ break;
+ }
+ return 1;
+ }
+--- linux-atm-2.4.1.orig/src/test/Makefile.in
++++ linux-atm-2.4.1/src/test/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -168,8 +168,11 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/align.P .deps/aping.P .deps/aread.P .deps/awrite.P \
++.deps/br.P .deps/bw.P .deps/isp.P .deps/ispl_l.P .deps/ispl_y.P \
++.deps/ttcp.P .deps/window.P
+ SOURCES = $(aread_SOURCES) $(awrite_SOURCES) $(ttcp_atm_SOURCES) $(align_SOURCES) $(aping_SOURCES) $(br_SOURCES) $(bw_SOURCES) $(isp_SOURCES) $(window_SOURCES)
+ OBJECTS = $(aread_OBJECTS) $(awrite_OBJECTS) $(ttcp_atm_OBJECTS) $(align_OBJECTS) $(aping_OBJECTS) $(br_OBJECTS) $(bw_OBJECTS) $(isp_OBJECTS) $(window_OBJECTS)
+
+@@ -177,9 +180,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .l .lo .o .obj .s .y
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/test/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/test/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -218,9 +221,6 @@
+
+ maintainer-clean-noinstPROGRAMS:
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -243,9 +243,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -325,7 +322,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -341,6 +338,11 @@
+ subdir = src/test
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/test/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -351,30 +353,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-align.o: align.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-aping.o: aping.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-aread.o: aread.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-awrite.o: awrite.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-br.o: br.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-bw.o: bw.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-isp.o: isp.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h isp.h \
+- errnos.inc
+-ispl_l.o: ispl_l.c ../../config.h ../../src/include/stdint.h isp.h \
+- ../../src/include/atm.h ispl_y.h
+-ispl_y.o: ispl_y.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h isp.h
+-ttcp.o: ttcp.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h ../../src/include/atmsap.h
+-window.o: window.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -412,21 +422,22 @@
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+ maintainer-clean-generic:
+- -test -z "ispl_llispl_yhispl_yc" || rm -f ispl_ll ispl_yh ispl_yc
++ -test -z "ispl_lcispl_yhispl_yc" || rm -f ispl_lc ispl_yh ispl_yc
+ mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-noinstPROGRAMS \
+ mostlyclean-compile mostlyclean-libtool \
+- mostlyclean-tags mostlyclean-generic
++ mostlyclean-tags mostlyclean-depend mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-binPROGRAMS clean-noinstPROGRAMS clean-compile \
+- clean-libtool clean-tags clean-generic mostlyclean-am
++ clean-libtool clean-tags clean-depend clean-generic \
++ mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-binPROGRAMS distclean-noinstPROGRAMS \
+ distclean-compile distclean-libtool distclean-tags \
+- distclean-generic clean-am
++ distclean-depend distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+@@ -434,8 +445,8 @@
+ maintainer-clean-am: maintainer-clean-binPROGRAMS \
+ maintainer-clean-noinstPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -448,19 +459,22 @@
+ mostlyclean-compile distclean-compile clean-compile \
+ maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+ clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ isp.o: errnos.inc
+
+ errnos.inc: mkerrnos.pl
+- @PERL@ ./mkerrnos.pl </usr/include/asm/errno.h \
+- >errnos.inc || { rm -f errnos.inc; exit 1; }
++ cpp -I/usr/include/ -dM /usr/include/asm/errno.h | grep "^#define E" \
++ | @PERL@ ./mkerrnos.pl | grep -v EMAXERRNO >errnos.inc \
++ || { rm -f errnos.inc; exit 1; }
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+--- linux-atm-2.4.1.orig/src/test/Makefile.am
++++ linux-atm-2.4.1/src/test/Makefile.am
+@@ -26,6 +26,7 @@
+ isp.o: errnos.inc
+
+ errnos.inc: mkerrnos.pl
+- @PERL@ ./mkerrnos.pl </usr/include/asm/errno.h \
+- >errnos.inc || { rm -f errnos.inc; exit 1; }
+-
++ cpp -I/usr/include/ -dM /usr/include/asm/errno.h | grep "^#define E" \
++ | @PERL@ ./mkerrnos.pl | grep -v EMAXERRNO >errnos.inc \
++ || { rm -f errnos.inc; exit 1; }
++
+--- linux-atm-2.4.1.orig/src/test/ttcp.c
++++ linux-atm-2.4.1/src/test/ttcp.c
+@@ -55,6 +55,8 @@
+ /* #define SYSV */ /* required on SGI IRIX releases before 3.3 */
+
+ #include <stdio.h>
++#include <stdlib.h>
++#include <string.h>
+ #include <signal.h>
+ #include <ctype.h>
+ #include <errno.h>
+@@ -67,6 +69,7 @@
+ #include <sys/time.h> /* struct timeval */
+ #include <atm.h>
+ #include <atmsap.h>
++#include <unistd.h>
+
+ #if defined(SYSV)
+ #include <sys/times.h>
+@@ -85,7 +88,8 @@
+ struct sockaddr_atmsvc satm;
+ struct atm_qos qos;
+
+-int domain, fromlen;
++int domain;
++socklen_t fromlen;
+ int fd; /* fd of network socket */
+
+ int buflen = 8 * 1024; /* length of buffer */
+@@ -120,7 +124,6 @@
+ static struct rusage ru0; /* Resource utilization at the start */
+
+ struct hostent *addr;
+-extern int errno;
+ extern int optind;
+ extern char *optarg;
+
+@@ -158,23 +161,21 @@
+ unsigned long numCalls; /* # of I/O system calls */
+ double cput, realt; /* user, real time (seconds) */
+
+-void err();
+-void mes();
+-int pattern();
+-void prep_timer();
+-double read_timer();
+-int Nread();
+-int Nwrite();
+-void delay();
+-int mread();
+-char *outfmt();
+-static void prusage();
+-static void tvadd();
+-static void tvsub();
+-static void psecs();
++void err(const char *s);
++void mes(const char *s);
++void prep_timer(void);
++void pattern(char *cp, int cnt);
++int Nread(int nfd, char *Nbuf, int count);
++int Nwrite(int nfd, char *Nbuf, int count);
++void delay(int us);
++int mread(int mfd, char *bufp, unsigned n);
++char *outfmt(double b);
++static void prusage(struct rusage *r0, struct rusage *r1, struct timeval *e, struct timeval *b, char *outp);
++static void tvadd(struct timeval *tsum, struct timeval *t0, struct timeval *t1);
++static void tvsub(struct timeval *tdiff, struct timeval *t1, struct timeval *t0);
++static void psecs(long l, char *cp);
+
+-void
+-sigpipe()
++void sigpipe(int unused)
+ {
+ }
+
+@@ -183,16 +184,14 @@
+ * main -
+ *-------------------------------------------------------------------------
+ */
+-main(argc,argv)
+-int argc;
+-char **argv;
++int main(int argc,char **argv)
+ {
+ struct timeval td;
+ unsigned long addr_tmp;
+ const char *port_name = NULL,*tos = NULL;
+ int c;
+ double mbps;
+-int no_check = 0;
++ int no_check = 0;
+
+ if (argc < 2) goto usage;
+
+@@ -275,7 +274,7 @@
+ }
+ }
+
+- if (port_name)
++ if (port_name) {
+ if (atm) goto usage;
+ else {
+ struct servent *se;
+@@ -283,13 +282,13 @@
+ se = getservbyname(port_name,udp ? "udp" : "tcp");
+ if (se) port = ntohs(se->s_port);
+ else {
+- const char *end;
++ char *end;
+
+ port = strtoul(port_name,&end,0);
+ if (*end) goto usage;
+ }
+ }
+-
++ }
+ host = argv[optind];
+
+ if (atm) {
+@@ -435,9 +434,9 @@
+ #endif
+
+ if (!atm || satm.sas_family == AF_ATMPVC || !trans)
+- if (bind(fd, atm ? &satm : &sinme, atm ? satm.sas_family == AF_ATMPVC ?
+- sizeof(struct sockaddr_atmpvc) : sizeof(struct sockaddr_atmsvc) :
+- sizeof(sinme)) < 0)
++ if (bind(fd, atm ?
++ (struct sockaddr *)&satm : (struct sockaddr *)&sinme,
++ atm ? satm.sas_family == AF_ATMPVC ? sizeof(struct sockaddr_atmpvc) : sizeof(struct sockaddr_atmsvc) : sizeof(sinme)) < 0)
+ err("bind");
+
+ if (!udp || (atm && satm.sas_family == AF_ATMSVC)) {
+@@ -453,8 +452,8 @@
+ err("setsockopt");
+ }
+
+- if (connect(fd, atm ? &satm : &sinhim, atm ? sizeof(satm) :
+- sizeof(sinhim)) < 0)
++ if (connect(fd,
++ atm ? (struct sockaddr *)&satm : (struct sockaddr *)&sinhim, atm ? sizeof(satm) : sizeof(sinhim)) < 0)
+ err("connect");
+
+ mes("connect");
+@@ -482,13 +481,13 @@
+ fromlen = sizeof(frominet);
+ domain = AF_INET;
+
+- if ((fd=accept(fd, &frominet, &fromlen) ) < 0)
++ if ((fd=accept(fd, (struct sockaddr *)&frominet, &fromlen) ) < 0)
+ err("accept");
+
+ {
+ struct sockaddr_atmsvc peer;
+ int peerlen = sizeof(peer);
+- if (getpeername(fd, (struct sockaddr_in *) &peer,
++ if (getpeername(fd, (struct sockaddr *) &peer,
+ &peerlen) < 0) {
+ err("getpeername");
+ }
+@@ -638,13 +637,13 @@
+ nbytes, cput, outfmt((double)nbytes/cput));
+
+ fprintf(stdout,
+- "ttcp%s: %d I/O calls, msec/call = %.2f, calls/sec = %.2f\n",
++ "ttcp%s: %lu I/O calls, msec/call = %.2f, calls/sec = %.2f\n",
+ trans?"-t":"-r",
+ numCalls,
+ 1000.0 * realt/((double)numCalls),
+ ((double)numCalls)/realt);
+ fprintf(stdout,
+- "ttcp%s: buffer address %#x\n",
++ "ttcp%s: buffer address %p\n",
+ trans?"-t":"-r",
+ buf);
+ }
+@@ -656,8 +655,7 @@
+ }
+
+ void
+-err(s)
+-char *s;
++err(const char *s)
+ {
+ int en = errno;
+
+@@ -670,8 +668,7 @@
+ }
+
+ void
+-mes(s)
+-char *s;
++mes(const char *s)
+ {
+ fprintf(stderr,"ttcp%s: %s\n", trans?"-t":"-r", s);
+ }
+@@ -681,9 +678,7 @@
+ * pattern -
+ *-------------------------------------------------------------------------
+ */
+-pattern(cp, cnt)
+-register char *cp;
+-register int cnt;
++void pattern(char *cp, int cnt)
+ {
+ register char c;
+ c = 0;
+@@ -694,9 +689,7 @@
+ }
+
+
+-char *
+-outfmt(b)
+-double b;
++char *outfmt(double b)
+ {
+ static char obuf[50];
+ switch (fmt) {
+@@ -758,7 +751,7 @@
+ * P R E P _ T I M E R
+ */
+ void
+-prep_timer()
++prep_timer(void)
+ {
+ gettimeofday(&start_time, (struct timezone *)0);
+ getrusage(RUSAGE_SELF, &ru0);
+@@ -768,8 +761,7 @@
+ * read_timer -
+ *-------------------------------------------------------------------------
+ */
+-double read_timer(str,len)
+-char *str;
++double read_timer(char *str,int len)
+ {
+ struct rusage ru1;
+ struct timeval tend, tstart, td;
+@@ -788,15 +780,11 @@
+ return( cput );
+ }
+
+-static void
+-prusage(r0, r1, e, b, outp)
+- register struct rusage *r0, *r1;
+- struct timeval *e, *b;
+- char *outp;
++static void prusage(struct rusage *r0, struct rusage *r1, struct timeval *e, struct timeval *b, char *outp)
+ {
+ struct timeval tdiff;
+ register time_t t;
+- register char *cp;
++ register const char *cp;
+ register int i;
+ int ms;
+
+@@ -823,13 +811,13 @@
+
+ case 'U':
+ tvsub(&tdiff, &r1->ru_utime, &r0->ru_utime);
+- sprintf(outp,"%d.%01d", tdiff.tv_sec, tdiff.tv_usec/100000);
++ sprintf(outp,"%ld.%01ld", tdiff.tv_sec, tdiff.tv_usec/100000);
+ END(outp);
+ break;
+
+ case 'S':
+ tvsub(&tdiff, &r1->ru_stime, &r0->ru_stime);
+- sprintf(outp,"%d.%01d", tdiff.tv_sec, tdiff.tv_usec/100000);
++ sprintf(outp,"%ld.%01ld", tdiff.tv_sec, tdiff.tv_usec/100000);
+ END(outp);
+ break;
+
+@@ -851,49 +839,49 @@
+ break;
+
+ case 'X':
+- sprintf(outp,"%d", t == 0 ? 0 : (r1->ru_ixrss-r0->ru_ixrss)/t);
++ sprintf(outp,"%ld", t == 0 ? 0 : (r1->ru_ixrss-r0->ru_ixrss)/t);
+ END(outp);
+ break;
+
+ case 'D':
+- sprintf(outp,"%d", t == 0 ? 0 :
++ sprintf(outp,"%ld", t == 0 ? 0 :
+ (r1->ru_idrss+r1->ru_isrss-(r0->ru_idrss+r0->ru_isrss))/t);
+ END(outp);
+ break;
+
+ case 'K':
+- sprintf(outp,"%d", t == 0 ? 0 :
++ sprintf(outp,"%ld", t == 0 ? 0 :
+ ((r1->ru_ixrss+r1->ru_isrss+r1->ru_idrss) -
+ (r0->ru_ixrss+r0->ru_idrss+r0->ru_isrss))/t);
+ END(outp);
+ break;
+
+ case 'M':
+- sprintf(outp,"%d", r1->ru_maxrss/2);
++ sprintf(outp,"%ld", r1->ru_maxrss/2);
+ END(outp);
+ break;
+
+ case 'F':
+- sprintf(outp,"%d", r1->ru_majflt-r0->ru_majflt);
++ sprintf(outp,"%ld", r1->ru_majflt-r0->ru_majflt);
+ END(outp);
+ break;
+
+ case 'R':
+- sprintf(outp,"%d", r1->ru_minflt-r0->ru_minflt);
++ sprintf(outp,"%ld", r1->ru_minflt-r0->ru_minflt);
+ END(outp);
+ break;
+
+ case 'I':
+- sprintf(outp,"%d", r1->ru_inblock-r0->ru_inblock);
++ sprintf(outp,"%ld", r1->ru_inblock-r0->ru_inblock);
+ END(outp);
+ break;
+
+ case 'O':
+- sprintf(outp,"%d", r1->ru_oublock-r0->ru_oublock);
++ sprintf(outp,"%ld", r1->ru_oublock-r0->ru_oublock);
+ END(outp);
+ break;
+ case 'C':
+- sprintf(outp,"%d+%d", r1->ru_nvcsw-r0->ru_nvcsw,
++ sprintf(outp,"%ld+%ld", r1->ru_nvcsw-r0->ru_nvcsw,
+ r1->ru_nivcsw-r0->ru_nivcsw );
+ END(outp);
+ break;
+@@ -903,9 +891,7 @@
+ *outp = '\0';
+ }
+
+-static void
+-tvadd(tsum, t0, t1)
+- struct timeval *tsum, *t0, *t1;
++static void tvadd(struct timeval *tsum, struct timeval *t0, struct timeval *t1)
+ {
+
+ tsum->tv_sec = t0->tv_sec + t1->tv_sec;
+@@ -919,8 +905,7 @@
+ * tvsub - tdiff = t1 - t0
+ *-------------------------------------------------------------------------
+ */
+-static void tvsub(tdiff, t1, t0)
+- struct timeval *tdiff, *t1, *t0;
++static void tvsub(struct timeval *tdiff, struct timeval *t1, struct timeval *t0)
+ {
+
+ tdiff->tv_sec = t1->tv_sec - t0->tv_sec;
+@@ -931,10 +916,7 @@
+ }
+ }
+
+-static void
+-psecs(l,cp)
+-long l;
+-register char *cp;
++static void psecs(long l, char *cp)
+ {
+ register int i;
+
+@@ -958,26 +940,23 @@
+ /*
+ * N R E A D
+ */
+-Nread( fd, buf, count )
+-int fd;
+-char *buf;
+-int count;
++int Nread( int nfd, char *Nbuf, int count )
+ {
+ struct sockaddr_in from;
+ int len = sizeof(from);
+ register int cnt;
+ if( udp ) {
+ #if 0
+- cnt = recvfrom( fd, buf, count, 0, &from, &len );
++ cnt = recvfrom( nfd, Nbuf, count, 0, &from, &len );
+ #else
+- cnt = recv( fd, buf, count, 0);
++ cnt = recv( nfd, Nbuf, count, 0);
+ #endif
+ numCalls++;
+ } else {
+ if( b_flag )
+- cnt = mread( fd, buf, count ); /* fill buf */
++ cnt = mread( nfd, Nbuf, count ); /* fill buf */
+ else {
+- cnt = read( fd, buf, count );
++ cnt = read( nfd, Nbuf, count );
+ numCalls++;
+ }
+ if (touchdata && cnt > 0) {
+@@ -994,17 +973,15 @@
+ * Nwrite -
+ *-------------------------------------------------------------------------
+ */
+-Nwrite(fd, buf, count)
+-int fd;
+-char *buf;
+-int count;
++int Nwrite(int nfd, char *Nbuf, int count)
+ {
+ register int cnt;
+
+ if (udp) {
+ again:
+- if (atm) cnt = write(fd, buf, count);
+- else cnt = sendto(fd, buf, count, 0, &sinhim, sizeof(sinhim));
++ if (atm) cnt = write(nfd, Nbuf, count);
++ else cnt = sendto(nfd, Nbuf, count, 0, (struct sockaddr *)&sinhim,
++ sizeof(sinhim));
+ numCalls++;
+ if ( cnt<0 && errno == ENOBUFS ) {
+ delay(18000);
+@@ -1012,7 +989,7 @@
+ goto again;
+ }
+ } else {
+- cnt = write(fd, buf, count);
++ cnt = write(nfd, Nbuf, count);
+ numCalls++;
+ }
+ if (cnt < 0) perror("WA:write");
+@@ -1020,13 +997,13 @@
+ }
+
+ void
+-delay(us)
++delay(int us)
+ {
+ struct timeval tv;
+
+ tv.tv_sec = 0;
+ tv.tv_usec = us;
+- (void)select( 1, (char *)0, (char *)0, (char *)0, &tv );
++ (void)select( 1, NULL, NULL, NULL, &tv );
+ }
+
+ /*
+@@ -1038,17 +1015,13 @@
+ * network connections don't deliver data with the same
+ * grouping as it is written with. Written by Robert S. Miles, BRL.
+ */
+-int
+-mread(fd, bufp, n)
+-int fd;
+-register char *bufp;
+-unsigned n;
++int mread(int mfd, char *bufp, unsigned n)
+ {
+ register unsigned count = 0;
+ register int nread;
+
+ do {
+- nread = read(fd, bufp, n-count);
++ nread = read(mfd, bufp, n-count);
+ numCalls++;
+ if(nread < 0) {
+ perror("ttcp_mread");
+--- linux-atm-2.4.1.orig/src/debug/Makefile.in
++++ linux-atm-2.4.1/src/debug/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -129,8 +129,9 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/delay.P .deps/svctor.P
+ SOURCES = $(delay_SOURCES) $(svctor_SOURCES)
+ OBJECTS = $(delay_OBJECTS) $(svctor_OBJECTS)
+
+@@ -138,9 +139,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/debug/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/debug/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -154,9 +155,6 @@
+
+ maintainer-clean-noinstPROGRAMS:
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -179,9 +177,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -224,7 +219,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -240,6 +235,11 @@
+ subdir = src/debug
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/debug/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -250,11 +250,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-delay.o: delay.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-svctor.o: svctor.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -291,27 +318,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-noinstPROGRAMS distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-noinstPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -322,12 +349,14 @@
+ mostlyclean-compile distclean-compile clean-compile \
+ maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+ clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/qgen/Makefile.in
++++ linux-atm-2.4.1/src/qgen/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -88,8 +88,7 @@
+ noinst_PROGRAMS = qgen q.dump # q40.out.o
+ check_PROGRAMS = q.test
+
+-qgen_SOURCES = common.c common.h file.c file.h first.c ql_y.y ql_l.l qgen.c \
+- qgen.h second.c third.c
++qgen_SOURCES = common.c common.h file.c file.h first.c ql_y.y ql_l.l qgen.c qgen.h second.c third.c
+
+ qgen_LDADD = -lfl
+
+@@ -108,17 +107,10 @@
+
+ EXTRA_DIST = ql_y.h incl.pl mknl.pl msg.fmt TODO
+
+-CLEANFILES = q.out.h q.out.c q.test.c qd.out.h qd.out.c qd.dump.c qd.test.c \
+- default.nl # q40.out.h q40.out.c q40.test.c
++CLEANFILES = q.out.h q.out.c q.test.c qd.out.h qd.out.c qd.dump.c qd.test.c default.nl # q40.out.h q40.out.c q40.test.c
+
+
+-NLS = atm_ai_msg atm_ai_ie atm_loc atm_cv atm_pu atm_na atm_cond atm_ie \
+- atm_msg atm_np atm_ton atm_sat atm_prs atm_scrn atm_vpa atm_poe \
+- q2931_cs atm_td atm_bc atm_tc atm_stc atm_upcc q2931_proto atm_flag \
+- atm_aalp atm_fd atm_tag atm_l2 atm_l3 atm_tt atm_mc atm_hl atm_imd \
+- atm_tdl atm_tni atm_nip atm_shi atm_oci atm_unfm atm_ofi atm_irs \
+- atm_it atm_lit atm_lsi atm_tcs atm_css atm_eqo atm_eqp atm_aap \
+- atm_asp atm_tor
++NLS = atm_ai_msg atm_ai_ie atm_loc atm_cv atm_pu atm_na atm_cond atm_ie atm_msg atm_np atm_ton atm_sat atm_prs atm_scrn atm_vpa atm_poe q2931_cs atm_td atm_bc atm_tc atm_stc atm_upcc q2931_proto atm_flag atm_aalp atm_fd atm_tag atm_l2 atm_l3 atm_tt atm_mc atm_hl atm_imd atm_tdl atm_tni atm_nip atm_shi atm_oci atm_unfm atm_ofi atm_irs atm_it atm_lit atm_lsi atm_tcs atm_css atm_eqo atm_eqp atm_aap atm_asp atm_tor
+
+ SYMFILES = uni.h $(shell @PERL@ incl.pl $(CFLAGS) linux/atmsap.h)
+ mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+@@ -155,8 +147,11 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/common.P .deps/file.P .deps/first.P .deps/qgen.P \
++.deps/ql_l.P .deps/ql_y.P .deps/qlib.P .deps/qtest.P .deps/second.P \
++.deps/third.P
+ SOURCES = $(q_test_SOURCES) $(qgen_SOURCES) $(q_dump_SOURCES) $(EXTRA_q_dump_SOURCES)
+ OBJECTS = $(q_test_OBJECTS) $(qgen_OBJECTS) $(q_dump_OBJECTS)
+
+@@ -164,9 +159,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .l .lo .o .obj .s .y
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/qgen/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/qgen/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -189,9 +184,6 @@
+
+ maintainer-clean-noinstPROGRAMS:
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -214,9 +206,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -272,7 +261,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -288,6 +277,11 @@
+ subdir = src/qgen
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/qgen/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -298,15 +292,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-common.o: common.c ../../config.h common.h
+-file.o: file.c ../../config.h common.h file.h
+-first.o: first.c ../../config.h common.h qgen.h file.h
+-qgen.o: qgen.c ../../config.h common.h file.h qgen.h
+-ql_l.o: ql_l.c ../../config.h common.h qgen.h ql_y.h
+-ql_y.o: ql_y.c ../../config.h common.h qgen.h file.h
+-second.o: second.c ../../config.h common.h qgen.h file.h
+-third.o: third.c ../../config.h common.h qgen.h file.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -344,21 +361,22 @@
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+ maintainer-clean-generic:
+- -test -z "ql_llql_yhql_yc" || rm -f ql_ll ql_yh ql_yc
++ -test -z "ql_lcql_yhql_yc" || rm -f ql_lc ql_yh ql_yc
+ mostlyclean-am: mostlyclean-checkPROGRAMS mostlyclean-noinstPROGRAMS \
+ mostlyclean-compile mostlyclean-libtool \
+- mostlyclean-tags mostlyclean-generic
++ mostlyclean-tags mostlyclean-depend mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-checkPROGRAMS clean-noinstPROGRAMS clean-compile \
+- clean-libtool clean-tags clean-generic mostlyclean-am
++ clean-libtool clean-tags clean-depend clean-generic \
++ mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-checkPROGRAMS distclean-noinstPROGRAMS \
+ distclean-compile distclean-libtool distclean-tags \
+- distclean-generic clean-am
++ distclean-depend distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+@@ -366,8 +384,8 @@
+ maintainer-clean-am: maintainer-clean-checkPROGRAMS \
+ maintainer-clean-noinstPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -380,12 +398,14 @@
+ mostlyclean-compile distclean-compile clean-compile \
+ maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+ clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ default.nl: mknl.pl $(SYMFILES)
+--- linux-atm-2.4.1.orig/src/qgen/ql_l.c
++++ linux-atm-2.4.1/src/qgen/ql_l.c
+@@ -1,32 +1,85 @@
+-/* A lexical scanner generated by flex */
+
+-/* Scanner skeleton version:
+- * $Header: /home/daffy/u0/vern/flex/RCS/flex.skl,v 2.91 96/09/10 16:58:48 vern Exp $
+- */
++#line 3 "lex.yy.c"
++
++#define YY_INT_ALIGNED short int
++
++/* A lexical scanner generated by flex */
+
+ #define FLEX_SCANNER
+ #define YY_FLEX_MAJOR_VERSION 2
+ #define YY_FLEX_MINOR_VERSION 5
++#define YY_FLEX_SUBMINOR_VERSION 31
++#if YY_FLEX_SUBMINOR_VERSION > 0
++#define FLEX_BETA
++#endif
+
++/* First, we deal with platform-specific or compiler-specific issues. */
++
++/* begin standard C headers. */
+ #include <stdio.h>
+-#include <unistd.h>
++#include <string.h>
++#include <errno.h>
++#include <stdlib.h>
+
++/* end standard C headers. */
+
+-/* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */
+-#ifdef c_plusplus
+-#ifndef __cplusplus
+-#define __cplusplus
++/* flex integer type definitions */
++
++#ifndef FLEXINT_H
++#define FLEXINT_H
++
++/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
++
++#if defined __STDC_VERSION__ && __STDC_VERSION__ >= 199901L
++#include <inttypes.h>
++typedef int8_t flex_int8_t;
++typedef uint8_t flex_uint8_t;
++typedef int16_t flex_int16_t;
++typedef uint16_t flex_uint16_t;
++typedef int32_t flex_int32_t;
++typedef uint32_t flex_uint32_t;
++#else
++typedef signed char flex_int8_t;
++typedef short int flex_int16_t;
++typedef int flex_int32_t;
++typedef unsigned char flex_uint8_t;
++typedef unsigned short int flex_uint16_t;
++typedef unsigned int flex_uint32_t;
++#endif /* ! C99 */
++
++/* Limits of integral types. */
++#ifndef INT8_MIN
++#define INT8_MIN (-128)
++#endif
++#ifndef INT16_MIN
++#define INT16_MIN (-32767-1)
++#endif
++#ifndef INT32_MIN
++#define INT32_MIN (-2147483647-1)
+ #endif
++#ifndef INT8_MAX
++#define INT8_MAX (127)
++#endif
++#ifndef INT16_MAX
++#define INT16_MAX (32767)
++#endif
++#ifndef INT32_MAX
++#define INT32_MAX (2147483647)
++#endif
++#ifndef UINT8_MAX
++#define UINT8_MAX (255U)
++#endif
++#ifndef UINT16_MAX
++#define UINT16_MAX (65535U)
++#endif
++#ifndef UINT32_MAX
++#define UINT32_MAX (4294967295U)
+ #endif
+
++#endif /* ! FLEXINT_H */
+
+ #ifdef __cplusplus
+
+-#include <stdlib.h>
+-
+-/* Use prototypes in function declarations. */
+-#define YY_USE_PROTOS
+-
+ /* The "const" storage-class-modifier is valid. */
+ #define YY_USE_CONST
+
+@@ -34,34 +87,17 @@
+
+ #if __STDC__
+
+-#define YY_USE_PROTOS
+ #define YY_USE_CONST
+
+ #endif /* __STDC__ */
+ #endif /* ! __cplusplus */
+
+-#ifdef __TURBOC__
+- #pragma warn -rch
+- #pragma warn -use
+-#include <io.h>
+-#include <stdlib.h>
+-#define YY_USE_CONST
+-#define YY_USE_PROTOS
+-#endif
+-
+ #ifdef YY_USE_CONST
+ #define yyconst const
+ #else
+ #define yyconst
+ #endif
+
+-
+-#ifdef YY_USE_PROTOS
+-#define YY_PROTO(proto) proto
+-#else
+-#define YY_PROTO(proto) ()
+-#endif
+-
+ /* Returned upon end-of-file. */
+ #define YY_NULL 0
+
+@@ -76,71 +112,71 @@
+ * but we do it the disgusting crufty way forced on us by the ()-less
+ * definition of BEGIN.
+ */
+-#define BEGIN yy_start = 1 + 2 *
++#define BEGIN (yy_start) = 1 + 2 *
+
+ /* Translate the current start state into a value that can be later handed
+ * to BEGIN to return to the state. The YYSTATE alias is for lex
+ * compatibility.
+ */
+-#define YY_START ((yy_start - 1) / 2)
++#define YY_START (((yy_start) - 1) / 2)
+ #define YYSTATE YY_START
+
+ /* Action number for EOF rule of a given start state. */
+ #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
+
+ /* Special action meaning "start processing a new file". */
+-#define YY_NEW_FILE yyrestart( yyin )
++#define YY_NEW_FILE yyrestart(yyin )
+
+ #define YY_END_OF_BUFFER_CHAR 0
+
+ /* Size of default input buffer. */
++#ifndef YY_BUF_SIZE
+ #define YY_BUF_SIZE 16384
++#endif
+
++#ifndef YY_TYPEDEF_YY_BUFFER_STATE
++#define YY_TYPEDEF_YY_BUFFER_STATE
+ typedef struct yy_buffer_state *YY_BUFFER_STATE;
++#endif
+
+ extern int yyleng;
++
+ extern FILE *yyin, *yyout;
+
+ #define EOB_ACT_CONTINUE_SCAN 0
+ #define EOB_ACT_END_OF_FILE 1
+ #define EOB_ACT_LAST_MATCH 2
+
+-/* The funky do-while in the following #define is used to turn the definition
+- * int a single C statement (which needs a semi-colon terminator). This
+- * avoids problems with code like:
+- *
+- * if ( condition_holds )
+- * yyless( 5 );
+- * else
+- * do_something_else();
+- *
+- * Prior to using the do-while the compiler would get upset at the
+- * "else" because it interpreted the "if" statement as being all
+- * done when it reached the ';' after the yyless() call.
+- */
+-
+-/* Return all but the first 'n' matched characters back to the input stream. */
+-
++ #define YY_LESS_LINENO(n)
++
++/* Return all but the first "n" matched characters back to the input stream. */
+ #define yyless(n) \
+ do \
+ { \
+ /* Undo effects of setting up yytext. */ \
+- *yy_cp = yy_hold_char; \
++ int yyless_macro_arg = (n); \
++ YY_LESS_LINENO(yyless_macro_arg);\
++ *yy_cp = (yy_hold_char); \
+ YY_RESTORE_YY_MORE_OFFSET \
+- yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \
++ (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
+ YY_DO_BEFORE_ACTION; /* set up yytext again */ \
+ } \
+ while ( 0 )
+
+-#define unput(c) yyunput( c, yytext_ptr )
++#define unput(c) yyunput( c, (yytext_ptr) )
+
+ /* The following is because we cannot portably get our hands on size_t
+ * (without autoconf's help, which isn't available because we want
+ * flex-generated scanners to compile on their own).
+ */
+-typedef unsigned int yy_size_t;
+
++#ifndef YY_TYPEDEF_YY_SIZE_T
++#define YY_TYPEDEF_YY_SIZE_T
++typedef unsigned int yy_size_t;
++#endif
+
++#ifndef YY_STRUCT_YY_BUFFER_STATE
++#define YY_STRUCT_YY_BUFFER_STATE
+ struct yy_buffer_state
+ {
+ FILE *yy_input_file;
+@@ -177,12 +213,16 @@
+ */
+ int yy_at_bol;
+
++ int yy_bs_lineno; /**< The line count. */
++ int yy_bs_column; /**< The column count. */
++
+ /* Whether to try to fill the input buffer when we reach the
+ * end of it.
+ */
+ int yy_fill_buffer;
+
+ int yy_buffer_status;
++
+ #define YY_BUFFER_NEW 0
+ #define YY_BUFFER_NORMAL 1
+ /* When an EOF's been seen but there's still some text to process
+@@ -196,23 +236,33 @@
+ * just pointing yyin at a new input file.
+ */
+ #define YY_BUFFER_EOF_PENDING 2
++
+ };
++#endif /* !YY_STRUCT_YY_BUFFER_STATE */
+
+-static YY_BUFFER_STATE yy_current_buffer = 0;
++/* Stack of input buffers. */
++static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */
++static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */
++static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */
+
+ /* We provide macros for accessing buffer states in case in the
+ * future we want to put the buffer states in a more general
+ * "scanner state".
++ *
++ * Returns the top of the stack, or NULL.
+ */
+-#define YY_CURRENT_BUFFER yy_current_buffer
++#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \
++ ? (yy_buffer_stack)[(yy_buffer_stack_top)] \
++ : NULL)
+
++/* Same as previous macro, but useful when we know that the buffer stack is not
++ * NULL or when we need an lvalue. For internal use only.
++ */
++#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)]
+
+ /* yy_hold_char holds the character lost when yytext is formed. */
+ static char yy_hold_char;
+-
+ static int yy_n_chars; /* number of characters read into yy_ch_buf */
+-
+-
+ int yyleng;
+
+ /* Points to current character in buffer. */
+@@ -225,66 +275,92 @@
+ */
+ static int yy_did_buffer_switch_on_eof;
+
+-void yyrestart YY_PROTO(( FILE *input_file ));
+-
+-void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer ));
+-void yy_load_buffer_state YY_PROTO(( void ));
+-YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size ));
+-void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b ));
+-void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file ));
+-void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b ));
+-#define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer )
+-
+-YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size ));
+-YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str ));
+-YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len ));
+-
+-static void *yy_flex_alloc YY_PROTO(( yy_size_t ));
+-static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t ));
+-static void yy_flex_free YY_PROTO(( void * ));
++void yyrestart (FILE *input_file );
++void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer );
++YY_BUFFER_STATE yy_create_buffer (FILE *file,int size );
++void yy_delete_buffer (YY_BUFFER_STATE b );
++void yy_flush_buffer (YY_BUFFER_STATE b );
++void yypush_buffer_state (YY_BUFFER_STATE new_buffer );
++void yypop_buffer_state (void );
++
++static void yyensure_buffer_stack (void );
++static void yy_load_buffer_state (void );
++static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file );
++
++#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER )
++
++YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size );
++YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str );
++YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,int len );
++
++void *yyalloc (yy_size_t );
++void *yyrealloc (void *,yy_size_t );
++void yyfree (void * );
+
+ #define yy_new_buffer yy_create_buffer
+
+ #define yy_set_interactive(is_interactive) \
+ { \
+- if ( ! yy_current_buffer ) \
+- yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
+- yy_current_buffer->yy_is_interactive = is_interactive; \
++ if ( ! YY_CURRENT_BUFFER ){ \
++ yyensure_buffer_stack (); \
++ YY_CURRENT_BUFFER_LVALUE = \
++ yy_create_buffer(yyin,YY_BUF_SIZE ); \
++ } \
++ YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
+ }
+
+ #define yy_set_bol(at_bol) \
+ { \
+- if ( ! yy_current_buffer ) \
+- yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \
+- yy_current_buffer->yy_at_bol = at_bol; \
++ if ( ! YY_CURRENT_BUFFER ){\
++ yyensure_buffer_stack (); \
++ YY_CURRENT_BUFFER_LVALUE = \
++ yy_create_buffer(yyin,YY_BUF_SIZE ); \
++ } \
++ YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
+ }
+
+-#define YY_AT_BOL() (yy_current_buffer->yy_at_bol)
++#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
++
++/* Begin user sect3 */
+
+ typedef unsigned char YY_CHAR;
++
+ FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0;
++
+ typedef int yy_state_type;
++
++extern int yylineno;
++
++int yylineno = 1;
++
+ extern char *yytext;
+ #define yytext_ptr yytext
+
+-static yy_state_type yy_get_previous_state YY_PROTO(( void ));
+-static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state ));
+-static int yy_get_next_buffer YY_PROTO(( void ));
+-static void yy_fatal_error YY_PROTO(( yyconst char msg[] ));
++static yy_state_type yy_get_previous_state (void );
++static yy_state_type yy_try_NUL_trans (yy_state_type current_state );
++static int yy_get_next_buffer (void );
++static void yy_fatal_error (yyconst char msg[] );
+
+ /* Done after the current pattern has been matched and before the
+ * corresponding action - sets up yytext.
+ */
+ #define YY_DO_BEFORE_ACTION \
+- yytext_ptr = yy_bp; \
+- yyleng = (int) (yy_cp - yy_bp); \
+- yy_hold_char = *yy_cp; \
++ (yytext_ptr) = yy_bp; \
++ yyleng = (size_t) (yy_cp - yy_bp); \
++ (yy_hold_char) = *yy_cp; \
+ *yy_cp = '\0'; \
+- yy_c_buf_p = yy_cp;
++ (yy_c_buf_p) = yy_cp;
+
+ #define YY_NUM_RULES 16
+ #define YY_END_OF_BUFFER 17
+-static yyconst short int yy_accept[70] =
++/* This struct is not used in this scanner,
++ but its presence is necessary. */
++struct yy_trans_info
++ {
++ flex_int32_t yy_verify;
++ flex_int32_t yy_nxt;
++ };
++static yyconst flex_int16_t yy_accept[70] =
+ { 0,
+ 10, 10, 17, 15, 10, 10, 15, 15, 9, 9,
+ 9, 9, 9, 9, 9, 9, 9, 10, 0, 0,
+@@ -295,7 +371,7 @@
+ 7, 0, 0, 0, 0, 0, 11, 12, 0
+ } ;
+
+-static yyconst int yy_ec[256] =
++static yyconst flex_int32_t yy_ec[256] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 1, 2, 3,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+@@ -327,14 +403,14 @@
+ 1, 1, 1, 1, 1
+ } ;
+
+-static yyconst int yy_meta[29] =
++static yyconst flex_int32_t yy_meta[29] =
+ { 0,
+ 1, 2, 2, 1, 3, 1, 4, 5, 5, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+ 4, 4, 4, 4, 4, 4, 4, 4
+ } ;
+
+-static yyconst short int yy_base[75] =
++static yyconst flex_int16_t yy_base[75] =
+ { 0,
+ 0, 0, 99, 100, 27, 28, 0, 95, 0, 86,
+ 72, 85, 80, 71, 78, 64, 76, 31, 84, 85,
+@@ -346,7 +422,7 @@
+ 48, 34, 53, 58
+ } ;
+
+-static yyconst short int yy_def[75] =
++static yyconst flex_int16_t yy_def[75] =
+ { 0,
+ 69, 1, 69, 69, 69, 69, 70, 71, 72, 72,
+ 72, 72, 72, 72, 72, 72, 72, 69, 70, 71,
+@@ -358,7 +434,7 @@
+ 69, 69, 69, 69
+ } ;
+
+-static yyconst short int yy_nxt[129] =
++static yyconst flex_int16_t yy_nxt[129] =
+ { 0,
+ 4, 5, 6, 5, 7, 8, 9, 4, 4, 10,
+ 11, 12, 13, 9, 9, 9, 9, 14, 9, 15,
+@@ -376,7 +452,7 @@
+ 69, 69, 69, 69, 69, 69, 69, 69
+ } ;
+
+-static yyconst short int yy_chk[129] =
++static yyconst flex_int16_t yy_chk[129] =
+ { 0,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+@@ -397,6 +473,9 @@
+ static yy_state_type yy_last_accepting_state;
+ static char *yy_last_accepting_cpos;
+
++extern int yy_flex_debug;
++int yy_flex_debug = 0;
++
+ /* The intent behind this definition is that it'll catch
+ * any uses of REJECT which flex missed.
+ */
+@@ -406,7 +485,6 @@
+ #define YY_RESTORE_YY_MORE_OFFSET
+ char *yytext;
+ #line 1 "ql_l.l"
+-#define INITIAL 0
+ #line 2 "ql_l.l"
+ /* ql.l - Q.2931 data structures description language */
+
+@@ -451,7 +529,21 @@
+ return (*walk)->str;
+ }
+
+-#line 455 "lex.yy.c"
++#line 533 "lex.yy.c"
++
++#define INITIAL 0
++
++#ifndef YY_NO_UNISTD_H
++/* Special case for "unistd.h", since it is non-ANSI. We include it way
++ * down here because we want the user's section 1 to have been scanned first.
++ * The user has a chance to override it with an option.
++ */
++#include <unistd.h>
++#endif
++
++#ifndef YY_EXTRA_TYPE
++#define YY_EXTRA_TYPE void *
++#endif
+
+ /* Macros after this point can all be overridden by user definitions in
+ * section 1.
+@@ -459,65 +551,30 @@
+
+ #ifndef YY_SKIP_YYWRAP
+ #ifdef __cplusplus
+-extern "C" int yywrap YY_PROTO(( void ));
++extern "C" int yywrap (void );
+ #else
+-extern int yywrap YY_PROTO(( void ));
++extern int yywrap (void );
+ #endif
+ #endif
+
+-#ifndef YY_NO_UNPUT
+-static void yyunput YY_PROTO(( int c, char *buf_ptr ));
+-#endif
+-
++ static void yyunput (int c,char *buf_ptr );
++
+ #ifndef yytext_ptr
+-static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int ));
++static void yy_flex_strncpy (char *,yyconst char *,int );
+ #endif
+
+ #ifdef YY_NEED_STRLEN
+-static int yy_flex_strlen YY_PROTO(( yyconst char * ));
++static int yy_flex_strlen (yyconst char * );
+ #endif
+
+ #ifndef YY_NO_INPUT
++
+ #ifdef __cplusplus
+-static int yyinput YY_PROTO(( void ));
++static int yyinput (void );
+ #else
+-static int input YY_PROTO(( void ));
+-#endif
+-#endif
+-
+-#if YY_STACK_USED
+-static int yy_start_stack_ptr = 0;
+-static int yy_start_stack_depth = 0;
+-static int *yy_start_stack = 0;
+-#ifndef YY_NO_PUSH_STATE
+-static void yy_push_state YY_PROTO(( int new_state ));
+-#endif
+-#ifndef YY_NO_POP_STATE
+-static void yy_pop_state YY_PROTO(( void ));
+-#endif
+-#ifndef YY_NO_TOP_STATE
+-static int yy_top_state YY_PROTO(( void ));
++static int input (void );
+ #endif
+
+-#else
+-#define YY_NO_PUSH_STATE 1
+-#define YY_NO_POP_STATE 1
+-#define YY_NO_TOP_STATE 1
+-#endif
+-
+-#ifdef YY_MALLOC_DECL
+-YY_MALLOC_DECL
+-#else
+-#if __STDC__
+-#ifndef __cplusplus
+-#include <stdlib.h>
+-#endif
+-#else
+-/* Just try to get by without declaring the routines. This will fail
+- * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int)
+- * or sizeof(void*) != sizeof(int).
+- */
+-#endif
+ #endif
+
+ /* Amount of stuff to slurp up with each read. */
+@@ -526,7 +583,6 @@
+ #endif
+
+ /* Copy whatever the last rule matched to the standard output. */
+-
+ #ifndef ECHO
+ /* This used to be an fputs(), but since the string might contain NUL's,
+ * we now use fwrite().
+@@ -539,9 +595,10 @@
+ */
+ #ifndef YY_INPUT
+ #define YY_INPUT(buf,result,max_size) \
+- if ( yy_current_buffer->yy_is_interactive ) \
++ if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
+ { \
+- int c = '*', n; \
++ int c = '*'; \
++ size_t n; \
+ for ( n = 0; n < max_size && \
+ (c = getc( yyin )) != EOF && c != '\n'; ++n ) \
+ buf[n] = (char) c; \
+@@ -551,9 +608,22 @@
+ YY_FATAL_ERROR( "input in flex scanner failed" ); \
+ result = n; \
+ } \
+- else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \
+- && ferror( yyin ) ) \
+- YY_FATAL_ERROR( "input in flex scanner failed" );
++ else \
++ { \
++ errno=0; \
++ while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
++ { \
++ if( errno != EINTR) \
++ { \
++ YY_FATAL_ERROR( "input in flex scanner failed" ); \
++ break; \
++ } \
++ errno=0; \
++ clearerr(yyin); \
++ } \
++ }\
++\
++
+ #endif
+
+ /* No semi-colon after return; correct usage is to write "yyterminate();" -
+@@ -574,12 +644,18 @@
+ #define YY_FATAL_ERROR(msg) yy_fatal_error( msg )
+ #endif
+
++/* end tables serialization structures and prototypes */
++
+ /* Default declaration of generated scanner - a define so the user can
+ * easily add parameters.
+ */
+ #ifndef YY_DECL
+-#define YY_DECL int yylex YY_PROTO(( void ))
+-#endif
++#define YY_DECL_IS_OURS 1
++
++extern int yylex (void);
++
++#define YY_DECL int yylex (void)
++#endif /* !YY_DECL */
+
+ /* Code executed at the beginning of each rule, after yytext and yyleng
+ * have been set up.
+@@ -596,27 +672,29 @@
+ #define YY_RULE_SETUP \
+ YY_USER_ACTION
+
++/** The main scanner function which does all the work.
++ */
+ YY_DECL
+- {
++{
+ register yy_state_type yy_current_state;
+- register char *yy_cp = NULL, *yy_bp = NULL;
++ register char *yy_cp, *yy_bp;
+ register int yy_act;
+-
++
+ #line 47 "ql_l.l"
+
+
+-#line 609 "lex.yy.c"
++#line 687 "lex.yy.c"
+
+- if ( yy_init )
++ if ( (yy_init) )
+ {
+- yy_init = 0;
++ (yy_init) = 0;
+
+ #ifdef YY_USER_INIT
+ YY_USER_INIT;
+ #endif
+
+- if ( ! yy_start )
+- yy_start = 1; /* first start state */
++ if ( ! (yy_start) )
++ (yy_start) = 1; /* first start state */
+
+ if ( ! yyin )
+ yyin = stdin;
+@@ -624,34 +702,36 @@
+ if ( ! yyout )
+ yyout = stdout;
+
+- if ( ! yy_current_buffer )
+- yy_current_buffer =
+- yy_create_buffer( yyin, YY_BUF_SIZE );
++ if ( ! YY_CURRENT_BUFFER ) {
++ yyensure_buffer_stack ();
++ YY_CURRENT_BUFFER_LVALUE =
++ yy_create_buffer(yyin,YY_BUF_SIZE );
++ }
+
+- yy_load_buffer_state();
++ yy_load_buffer_state( );
+ }
+
+ while ( 1 ) /* loops until end-of-file is reached */
+ {
+- yy_cp = yy_c_buf_p;
++ yy_cp = (yy_c_buf_p);
+
+ /* Support of yytext. */
+- *yy_cp = yy_hold_char;
++ *yy_cp = (yy_hold_char);
+
+ /* yy_bp points to the position in yy_ch_buf of the start of
+ * the current run.
+ */
+ yy_bp = yy_cp;
+
+- yy_current_state = yy_start;
++ yy_current_state = (yy_start);
+ yy_match:
+ do
+ {
+ register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
+ if ( yy_accept[yy_current_state] )
+ {
+- yy_last_accepting_state = yy_current_state;
+- yy_last_accepting_cpos = yy_cp;
++ (yy_last_accepting_state) = yy_current_state;
++ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+@@ -668,24 +748,22 @@
+ yy_act = yy_accept[yy_current_state];
+ if ( yy_act == 0 )
+ { /* have to back up */
+- yy_cp = yy_last_accepting_cpos;
+- yy_current_state = yy_last_accepting_state;
++ yy_cp = (yy_last_accepting_cpos);
++ yy_current_state = (yy_last_accepting_state);
+ yy_act = yy_accept[yy_current_state];
+ }
+
+ YY_DO_BEFORE_ACTION;
+
+-
+ do_action: /* This label is used only to access EOF actions. */
+
+-
+ switch ( yy_act )
+ { /* beginning of action switch */
+ case 0: /* must back up */
+ /* undo the effects of YY_DO_BEFORE_ACTION */
+- *yy_cp = yy_hold_char;
+- yy_cp = yy_last_accepting_cpos;
+- yy_current_state = yy_last_accepting_state;
++ *yy_cp = (yy_hold_char);
++ yy_cp = (yy_last_accepting_cpos);
++ yy_current_state = (yy_last_accepting_state);
+ goto yy_find_action;
+
+ case 1:
+@@ -735,6 +813,7 @@
+ return TOK_ID; }
+ YY_BREAK
+ case 10:
++/* rule 10 can match eol */
+ YY_RULE_SETUP
+ #line 59 "ql_l.l"
+ lineno += *yytext == '\n';
+@@ -755,6 +834,7 @@
+ return TOK_STRING; }
+ YY_BREAK
+ case 14:
++/* rule 14 can match eol */
+ YY_RULE_SETUP
+ #line 66 "ql_l.l"
+ lineno++;
+@@ -769,33 +849,33 @@
+ #line 69 "ql_l.l"
+ ECHO;
+ YY_BREAK
+-#line 773 "lex.yy.c"
++#line 853 "lex.yy.c"
+ case YY_STATE_EOF(INITIAL):
+ yyterminate();
+
+ case YY_END_OF_BUFFER:
+ {
+ /* Amount of text matched not including the EOB char. */
+- int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1;
++ int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1;
+
+ /* Undo the effects of YY_DO_BEFORE_ACTION. */
+- *yy_cp = yy_hold_char;
++ *yy_cp = (yy_hold_char);
+ YY_RESTORE_YY_MORE_OFFSET
+
+- if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW )
++ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
+ {
+ /* We're scanning a new file or input source. It's
+ * possible that this happened because the user
+ * just pointed yyin at a new source and called
+ * yylex(). If so, then we have to assure
+- * consistency between yy_current_buffer and our
++ * consistency between YY_CURRENT_BUFFER and our
+ * globals. Here is the right place to do so, because
+ * this is the first action (other than possibly a
+ * back-up) that will match for the new input source.
+ */
+- yy_n_chars = yy_current_buffer->yy_n_chars;
+- yy_current_buffer->yy_input_file = yyin;
+- yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL;
++ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
++ YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
++ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
+ }
+
+ /* Note that here we test for yy_c_buf_p "<=" to the position
+@@ -805,13 +885,13 @@
+ * end-of-buffer state). Contrast this with the test
+ * in input().
+ */
+- if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] )
++ if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ { /* This was really a NUL. */
+ yy_state_type yy_next_state;
+
+- yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text;
++ (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text;
+
+- yy_current_state = yy_get_previous_state();
++ yy_current_state = yy_get_previous_state( );
+
+ /* Okay, we're now positioned to make the NUL
+ * transition. We couldn't have
+@@ -824,30 +904,30 @@
+
+ yy_next_state = yy_try_NUL_trans( yy_current_state );
+
+- yy_bp = yytext_ptr + YY_MORE_ADJ;
++ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+
+ if ( yy_next_state )
+ {
+ /* Consume the NUL. */
+- yy_cp = ++yy_c_buf_p;
++ yy_cp = ++(yy_c_buf_p);
+ yy_current_state = yy_next_state;
+ goto yy_match;
+ }
+
+ else
+ {
+- yy_cp = yy_c_buf_p;
++ yy_cp = (yy_c_buf_p);
+ goto yy_find_action;
+ }
+ }
+
+- else switch ( yy_get_next_buffer() )
++ else switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_END_OF_FILE:
+ {
+- yy_did_buffer_switch_on_eof = 0;
++ (yy_did_buffer_switch_on_eof) = 0;
+
+- if ( yywrap() )
++ if ( yywrap( ) )
+ {
+ /* Note: because we've taken care in
+ * yy_get_next_buffer() to have set up
+@@ -858,7 +938,7 @@
+ * YY_NULL, it'll still work - another
+ * YY_NULL will get returned.
+ */
+- yy_c_buf_p = yytext_ptr + YY_MORE_ADJ;
++ (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ;
+
+ yy_act = YY_STATE_EOF(YY_START);
+ goto do_action;
+@@ -866,30 +946,30 @@
+
+ else
+ {
+- if ( ! yy_did_buffer_switch_on_eof )
++ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+ }
+ break;
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+- yy_c_buf_p =
+- yytext_ptr + yy_amount_of_matched_text;
++ (yy_c_buf_p) =
++ (yytext_ptr) + yy_amount_of_matched_text;
+
+- yy_current_state = yy_get_previous_state();
++ yy_current_state = yy_get_previous_state( );
+
+- yy_cp = yy_c_buf_p;
+- yy_bp = yytext_ptr + YY_MORE_ADJ;
++ yy_cp = (yy_c_buf_p);
++ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_match;
+
+ case EOB_ACT_LAST_MATCH:
+- yy_c_buf_p =
+- &yy_current_buffer->yy_ch_buf[yy_n_chars];
++ (yy_c_buf_p) =
++ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)];
+
+- yy_current_state = yy_get_previous_state();
++ yy_current_state = yy_get_previous_state( );
+
+- yy_cp = yy_c_buf_p;
+- yy_bp = yytext_ptr + YY_MORE_ADJ;
++ yy_cp = (yy_c_buf_p);
++ yy_bp = (yytext_ptr) + YY_MORE_ADJ;
+ goto yy_find_action;
+ }
+ break;
+@@ -900,8 +980,7 @@
+ "fatal flex scanner internal error--no action found" );
+ } /* end of action switch */
+ } /* end of scanning one token */
+- } /* end of yylex */
+-
++} /* end of yylex */
+
+ /* yy_get_next_buffer - try to read in a new buffer
+ *
+@@ -910,21 +989,20 @@
+ * EOB_ACT_CONTINUE_SCAN - continue scanning from current position
+ * EOB_ACT_END_OF_FILE - end of file
+ */
+-
+-static int yy_get_next_buffer()
+- {
+- register char *dest = yy_current_buffer->yy_ch_buf;
+- register char *source = yytext_ptr;
++static int yy_get_next_buffer (void)
++{
++ register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
++ register char *source = (yytext_ptr);
+ register int number_to_move, i;
+ int ret_val;
+
+- if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] )
++ if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] )
+ YY_FATAL_ERROR(
+ "fatal flex scanner internal error--end of buffer missed" );
+
+- if ( yy_current_buffer->yy_fill_buffer == 0 )
++ if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
+ { /* Don't try to fill the buffer, so this is an EOF. */
+- if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 )
++ if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 )
+ {
+ /* We matched a single character, the EOB, so
+ * treat this as a final EOF.
+@@ -944,34 +1022,30 @@
+ /* Try to read more data. */
+
+ /* First move last chars to start of buffer. */
+- number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1;
++ number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1;
+
+ for ( i = 0; i < number_to_move; ++i )
+ *(dest++) = *(source++);
+
+- if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING )
++ if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
+ /* don't do the read, it's not guaranteed to return an EOF,
+ * just force an EOF
+ */
+- yy_current_buffer->yy_n_chars = yy_n_chars = 0;
++ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0;
+
+ else
+ {
+- int num_to_read =
+- yy_current_buffer->yy_buf_size - number_to_move - 1;
++ size_t num_to_read =
++ YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
+
+ while ( num_to_read <= 0 )
+ { /* Not enough room in the buffer - grow it. */
+-#ifdef YY_USES_REJECT
+- YY_FATAL_ERROR(
+-"input buffer overflow, can't enlarge buffer because scanner uses REJECT" );
+-#else
+
+ /* just a shorter name for the current buffer */
+- YY_BUFFER_STATE b = yy_current_buffer;
++ YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
+
+ int yy_c_buf_p_offset =
+- (int) (yy_c_buf_p - b->yy_ch_buf);
++ (int) ((yy_c_buf_p) - b->yy_ch_buf);
+
+ if ( b->yy_is_our_buffer )
+ {
+@@ -984,8 +1058,7 @@
+
+ b->yy_ch_buf = (char *)
+ /* Include room in for 2 EOB chars. */
+- yy_flex_realloc( (void *) b->yy_ch_buf,
+- b->yy_buf_size + 2 );
++ yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 );
+ }
+ else
+ /* Can't grow it, we don't own it. */
+@@ -995,35 +1068,35 @@
+ YY_FATAL_ERROR(
+ "fatal error - scanner input buffer overflow" );
+
+- yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];
++ (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset];
+
+- num_to_read = yy_current_buffer->yy_buf_size -
++ num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
+ number_to_move - 1;
+-#endif
++
+ }
+
+ if ( num_to_read > YY_READ_BUF_SIZE )
+ num_to_read = YY_READ_BUF_SIZE;
+
+ /* Read in more data. */
+- YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]),
+- yy_n_chars, num_to_read );
++ YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
++ (yy_n_chars), num_to_read );
+
+- yy_current_buffer->yy_n_chars = yy_n_chars;
++ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+- if ( yy_n_chars == 0 )
++ if ( (yy_n_chars) == 0 )
+ {
+ if ( number_to_move == YY_MORE_ADJ )
+ {
+ ret_val = EOB_ACT_END_OF_FILE;
+- yyrestart( yyin );
++ yyrestart(yyin );
+ }
+
+ else
+ {
+ ret_val = EOB_ACT_LAST_MATCH;
+- yy_current_buffer->yy_buffer_status =
++ YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
+ YY_BUFFER_EOF_PENDING;
+ }
+ }
+@@ -1031,32 +1104,31 @@
+ else
+ ret_val = EOB_ACT_CONTINUE_SCAN;
+
+- yy_n_chars += number_to_move;
+- yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR;
+- yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
++ (yy_n_chars) += number_to_move;
++ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR;
++ YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR;
+
+- yytext_ptr = &yy_current_buffer->yy_ch_buf[0];
++ (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
+
+ return ret_val;
+- }
+-
++}
+
+ /* yy_get_previous_state - get the state just before the EOB char was reached */
+
+-static yy_state_type yy_get_previous_state()
+- {
++ static yy_state_type yy_get_previous_state (void)
++{
+ register yy_state_type yy_current_state;
+ register char *yy_cp;
++
++ yy_current_state = (yy_start);
+
+- yy_current_state = yy_start;
+-
+- for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp )
++ for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp )
+ {
+ register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
+ if ( yy_accept[yy_current_state] )
+ {
+- yy_last_accepting_state = yy_current_state;
+- yy_last_accepting_cpos = yy_cp;
++ (yy_last_accepting_state) = yy_current_state;
++ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+@@ -1068,30 +1140,23 @@
+ }
+
+ return yy_current_state;
+- }
+-
++}
+
+ /* yy_try_NUL_trans - try to make a transition on the NUL character
+ *
+ * synopsis
+ * next_state = yy_try_NUL_trans( current_state );
+ */
+-
+-#ifdef YY_USE_PROTOS
+-static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state )
+-#else
+-static yy_state_type yy_try_NUL_trans( yy_current_state )
+-yy_state_type yy_current_state;
+-#endif
+- {
++ static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state )
++{
+ register int yy_is_jam;
+- register char *yy_cp = yy_c_buf_p;
++ register char *yy_cp = (yy_c_buf_p);
+
+ register YY_CHAR yy_c = 1;
+ if ( yy_accept[yy_current_state] )
+ {
+- yy_last_accepting_state = yy_current_state;
+- yy_last_accepting_cpos = yy_cp;
++ (yy_last_accepting_state) = yy_current_state;
++ (yy_last_accepting_cpos) = yy_cp;
+ }
+ while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
+ {
+@@ -1103,80 +1168,73 @@
+ yy_is_jam = (yy_current_state == 69);
+
+ return yy_is_jam ? 0 : yy_current_state;
+- }
+-
++}
+
+-#ifndef YY_NO_UNPUT
+-#ifdef YY_USE_PROTOS
+-static void yyunput( int c, register char *yy_bp )
+-#else
+-static void yyunput( c, yy_bp )
+-int c;
+-register char *yy_bp;
+-#endif
+- {
+- register char *yy_cp = yy_c_buf_p;
++ static void yyunput (int c, register char * yy_bp )
++{
++ register char *yy_cp;
++
++ yy_cp = (yy_c_buf_p);
+
+ /* undo effects of setting up yytext */
+- *yy_cp = yy_hold_char;
++ *yy_cp = (yy_hold_char);
+
+- if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
++ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
+ { /* need to shift things up to make room */
+ /* +2 for EOB chars. */
+- register int number_to_move = yy_n_chars + 2;
+- register char *dest = &yy_current_buffer->yy_ch_buf[
+- yy_current_buffer->yy_buf_size + 2];
++ register int number_to_move = (yy_n_chars) + 2;
++ register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[
++ YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2];
+ register char *source =
+- &yy_current_buffer->yy_ch_buf[number_to_move];
++ &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move];
+
+- while ( source > yy_current_buffer->yy_ch_buf )
++ while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
+ *--dest = *--source;
+
+ yy_cp += (int) (dest - source);
+ yy_bp += (int) (dest - source);
+- yy_current_buffer->yy_n_chars =
+- yy_n_chars = yy_current_buffer->yy_buf_size;
++ YY_CURRENT_BUFFER_LVALUE->yy_n_chars =
++ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size;
+
+- if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 )
++ if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 )
+ YY_FATAL_ERROR( "flex scanner push-back overflow" );
+ }
+
+ *--yy_cp = (char) c;
+
++ (yytext_ptr) = yy_bp;
++ (yy_hold_char) = *yy_cp;
++ (yy_c_buf_p) = yy_cp;
++}
+
+- yytext_ptr = yy_bp;
+- yy_hold_char = *yy_cp;
+- yy_c_buf_p = yy_cp;
+- }
+-#endif /* ifndef YY_NO_UNPUT */
+-
+-
++#ifndef YY_NO_INPUT
+ #ifdef __cplusplus
+-static int yyinput()
++ static int yyinput (void)
+ #else
+-static int input()
++ static int input (void)
+ #endif
+- {
+- int c;
+
+- *yy_c_buf_p = yy_hold_char;
++{
++ int c;
++
++ *(yy_c_buf_p) = (yy_hold_char);
+
+- if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
++ if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR )
+ {
+ /* yy_c_buf_p now points to the character we want to return.
+ * If this occurs *before* the EOB characters, then it's a
+ * valid NUL; if not, then we've hit the end of the buffer.
+ */
+- if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] )
++ if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] )
+ /* This was really a NUL. */
+- *yy_c_buf_p = '\0';
++ *(yy_c_buf_p) = '\0';
+
+ else
+ { /* need more input */
+- int offset = yy_c_buf_p - yytext_ptr;
+- ++yy_c_buf_p;
++ int offset = (yy_c_buf_p) - (yytext_ptr);
++ ++(yy_c_buf_p);
+
+- switch ( yy_get_next_buffer() )
++ switch ( yy_get_next_buffer( ) )
+ {
+ case EOB_ACT_LAST_MATCH:
+ /* This happens because yy_g_n_b()
+@@ -1190,16 +1248,16 @@
+ */
+
+ /* Reset buffer status. */
+- yyrestart( yyin );
++ yyrestart(yyin );
+
+- /* fall through */
++ /*FALLTHROUGH*/
+
+ case EOB_ACT_END_OF_FILE:
+ {
+- if ( yywrap() )
++ if ( yywrap( ) )
+ return EOF;
+
+- if ( ! yy_did_buffer_switch_on_eof )
++ if ( ! (yy_did_buffer_switch_on_eof) )
+ YY_NEW_FILE;
+ #ifdef __cplusplus
+ return yyinput();
+@@ -1209,90 +1267,92 @@
+ }
+
+ case EOB_ACT_CONTINUE_SCAN:
+- yy_c_buf_p = yytext_ptr + offset;
++ (yy_c_buf_p) = (yytext_ptr) + offset;
+ break;
+ }
+ }
+ }
+
+- c = *(unsigned char *) yy_c_buf_p; /* cast for 8-bit char's */
+- *yy_c_buf_p = '\0'; /* preserve yytext */
+- yy_hold_char = *++yy_c_buf_p;
+-
++ c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */
++ *(yy_c_buf_p) = '\0'; /* preserve yytext */
++ (yy_hold_char) = *++(yy_c_buf_p);
+
+ return c;
+- }
+-
+-
+-#ifdef YY_USE_PROTOS
+-void yyrestart( FILE *input_file )
+-#else
+-void yyrestart( input_file )
+-FILE *input_file;
+-#endif
+- {
+- if ( ! yy_current_buffer )
+- yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE );
++}
++#endif /* ifndef YY_NO_INPUT */
+
+- yy_init_buffer( yy_current_buffer, input_file );
+- yy_load_buffer_state();
++/** Immediately switch to a different input stream.
++ * @param input_file A readable stream.
++ *
++ * @note This function does not reset the start condition to @c INITIAL .
++ */
++ void yyrestart (FILE * input_file )
++{
++
++ if ( ! YY_CURRENT_BUFFER ){
++ yyensure_buffer_stack ();
++ YY_CURRENT_BUFFER_LVALUE =
++ yy_create_buffer(yyin,YY_BUF_SIZE );
+ }
+
++ yy_init_buffer(YY_CURRENT_BUFFER,input_file );
++ yy_load_buffer_state( );
++}
+
+-#ifdef YY_USE_PROTOS
+-void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer )
+-#else
+-void yy_switch_to_buffer( new_buffer )
+-YY_BUFFER_STATE new_buffer;
+-#endif
+- {
+- if ( yy_current_buffer == new_buffer )
++/** Switch to a different input buffer.
++ * @param new_buffer The new input buffer.
++ *
++ */
++ void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer )
++{
++
++ /* TODO. We should be able to replace this entire function body
++ * with
++ * yypop_buffer_state();
++ * yypush_buffer_state(new_buffer);
++ */
++ yyensure_buffer_stack ();
++ if ( YY_CURRENT_BUFFER == new_buffer )
+ return;
+
+- if ( yy_current_buffer )
++ if ( YY_CURRENT_BUFFER )
+ {
+ /* Flush out information for old buffer. */
+- *yy_c_buf_p = yy_hold_char;
+- yy_current_buffer->yy_buf_pos = yy_c_buf_p;
+- yy_current_buffer->yy_n_chars = yy_n_chars;
++ *(yy_c_buf_p) = (yy_hold_char);
++ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
++ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
+ }
+
+- yy_current_buffer = new_buffer;
+- yy_load_buffer_state();
++ YY_CURRENT_BUFFER_LVALUE = new_buffer;
++ yy_load_buffer_state( );
+
+ /* We don't actually know whether we did this switch during
+ * EOF (yywrap()) processing, but the only time this flag
+ * is looked at is after yywrap() is called, so it's safe
+ * to go ahead and always set it.
+ */
+- yy_did_buffer_switch_on_eof = 1;
+- }
+-
+-
+-#ifdef YY_USE_PROTOS
+-void yy_load_buffer_state( void )
+-#else
+-void yy_load_buffer_state()
+-#endif
+- {
+- yy_n_chars = yy_current_buffer->yy_n_chars;
+- yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos;
+- yyin = yy_current_buffer->yy_input_file;
+- yy_hold_char = *yy_c_buf_p;
+- }
++ (yy_did_buffer_switch_on_eof) = 1;
++}
+
++static void yy_load_buffer_state (void)
++{
++ (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
++ (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
++ yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
++ (yy_hold_char) = *(yy_c_buf_p);
++}
+
+-#ifdef YY_USE_PROTOS
+-YY_BUFFER_STATE yy_create_buffer( FILE *file, int size )
+-#else
+-YY_BUFFER_STATE yy_create_buffer( file, size )
+-FILE *file;
+-int size;
+-#endif
+- {
++/** Allocate and initialize an input buffer state.
++ * @param file A readable stream.
++ * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
++ *
++ * @return the allocated buffer state.
++ */
++ YY_BUFFER_STATE yy_create_buffer (FILE * file, int size )
++{
+ YY_BUFFER_STATE b;
+-
+- b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
++
++ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+@@ -1301,75 +1361,75 @@
+ /* yy_ch_buf has to be 2 characters longer than the size given because
+ * we need to put in 2 end-of-buffer characters.
+ */
+- b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 );
++ b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 );
+ if ( ! b->yy_ch_buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" );
+
+ b->yy_is_our_buffer = 1;
+
+- yy_init_buffer( b, file );
++ yy_init_buffer(b,file );
+
+ return b;
+- }
+-
++}
+
+-#ifdef YY_USE_PROTOS
+-void yy_delete_buffer( YY_BUFFER_STATE b )
+-#else
+-void yy_delete_buffer( b )
+-YY_BUFFER_STATE b;
+-#endif
+- {
++/** Destroy the buffer.
++ * @param b a buffer created with yy_create_buffer()
++ *
++ */
++ void yy_delete_buffer (YY_BUFFER_STATE b )
++{
++
+ if ( ! b )
+ return;
+
+- if ( b == yy_current_buffer )
+- yy_current_buffer = (YY_BUFFER_STATE) 0;
++ if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
++ YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
+
+ if ( b->yy_is_our_buffer )
+- yy_flex_free( (void *) b->yy_ch_buf );
++ yyfree((void *) b->yy_ch_buf );
+
+- yy_flex_free( (void *) b );
+- }
+-
+-
+-
+-#ifdef YY_USE_PROTOS
+-void yy_init_buffer( YY_BUFFER_STATE b, FILE *file )
+-#else
+-void yy_init_buffer( b, file )
+-YY_BUFFER_STATE b;
+-FILE *file;
+-#endif
++ yyfree((void *) b );
++}
+
++#ifndef __cplusplus
++extern int isatty (int );
++#endif /* __cplusplus */
++
++/* Initializes or reinitializes a buffer.
++ * This function is sometimes called more than once on the same buffer,
++ * such as during a yyrestart() or at EOF.
++ */
++ static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file )
+
+- {
+- yy_flush_buffer( b );
++{
++ int oerrno = errno;
++
++ yy_flush_buffer(b );
+
+ b->yy_input_file = file;
+ b->yy_fill_buffer = 1;
+
+-#if YY_ALWAYS_INTERACTIVE
+- b->yy_is_interactive = 1;
+-#else
+-#if YY_NEVER_INTERACTIVE
+- b->yy_is_interactive = 0;
+-#else
+- b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
+-#endif
+-#endif
+- }
+-
++ /* If b is the current buffer, then yy_init_buffer was _probably_
++ * called from yyrestart() or through yy_get_next_buffer.
++ * In that case, we don't want to reset the lineno or column.
++ */
++ if (b != YY_CURRENT_BUFFER){
++ b->yy_bs_lineno = 1;
++ b->yy_bs_column = 0;
++ }
+
+-#ifdef YY_USE_PROTOS
+-void yy_flush_buffer( YY_BUFFER_STATE b )
+-#else
+-void yy_flush_buffer( b )
+-YY_BUFFER_STATE b;
+-#endif
++ b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
++
++ errno = oerrno;
++}
+
+- {
+- if ( ! b )
++/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
++ * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
++ *
++ */
++ void yy_flush_buffer (YY_BUFFER_STATE b )
++{
++ if ( ! b )
+ return;
+
+ b->yy_n_chars = 0;
+@@ -1386,29 +1446,121 @@
+ b->yy_at_bol = 1;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+- if ( b == yy_current_buffer )
+- yy_load_buffer_state();
++ if ( b == YY_CURRENT_BUFFER )
++ yy_load_buffer_state( );
++}
++
++/** Pushes the new state onto the stack. The new state becomes
++ * the current state. This function will allocate the stack
++ * if necessary.
++ * @param new_buffer The new state.
++ *
++ */
++void yypush_buffer_state (YY_BUFFER_STATE new_buffer )
++{
++ if (new_buffer == NULL)
++ return;
++
++ yyensure_buffer_stack();
++
++ /* This block is copied from yy_switch_to_buffer. */
++ if ( YY_CURRENT_BUFFER )
++ {
++ /* Flush out information for old buffer. */
++ *(yy_c_buf_p) = (yy_hold_char);
++ YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p);
++ YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars);
++ }
++
++ /* Only push if top exists. Otherwise, replace top. */
++ if (YY_CURRENT_BUFFER)
++ (yy_buffer_stack_top)++;
++ YY_CURRENT_BUFFER_LVALUE = new_buffer;
++
++ /* copied from yy_switch_to_buffer. */
++ yy_load_buffer_state( );
++ (yy_did_buffer_switch_on_eof) = 1;
++}
++
++/** Removes and deletes the top of the stack, if present.
++ * The next element becomes the new top.
++ *
++ */
++void yypop_buffer_state (void)
++{
++ if (!YY_CURRENT_BUFFER)
++ return;
++
++ yy_delete_buffer(YY_CURRENT_BUFFER );
++ YY_CURRENT_BUFFER_LVALUE = NULL;
++ if ((yy_buffer_stack_top) > 0)
++ --(yy_buffer_stack_top);
++
++ if (YY_CURRENT_BUFFER) {
++ yy_load_buffer_state( );
++ (yy_did_buffer_switch_on_eof) = 1;
+ }
++}
+
++/* Allocates the stack if it does not exist.
++ * Guarantees space for at least one push.
++ */
++static void yyensure_buffer_stack (void)
++{
++ int num_to_alloc;
++
++ if (!(yy_buffer_stack)) {
++
++ /* First allocation is just for 2 elements, since we don't know if this
++ * scanner will even need a stack. We use 2 instead of 1 to avoid an
++ * immediate realloc on the next call.
++ */
++ num_to_alloc = 1;
++ (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc
++ (num_to_alloc * sizeof(struct yy_buffer_state*)
++ );
++
++ memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*));
++
++ (yy_buffer_stack_max) = num_to_alloc;
++ (yy_buffer_stack_top) = 0;
++ return;
++ }
+
+-#ifndef YY_NO_SCAN_BUFFER
+-#ifdef YY_USE_PROTOS
+-YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size )
+-#else
+-YY_BUFFER_STATE yy_scan_buffer( base, size )
+-char *base;
+-yy_size_t size;
+-#endif
+- {
+- YY_BUFFER_STATE b;
++ if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){
++
++ /* Increase the buffer to prepare for a possible push. */
++ int grow_size = 8 /* arbitrary grow size */;
+
++ num_to_alloc = (yy_buffer_stack_max) + grow_size;
++ (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc
++ ((yy_buffer_stack),
++ num_to_alloc * sizeof(struct yy_buffer_state*)
++ );
++
++ /* zero only the new slots.*/
++ memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*));
++ (yy_buffer_stack_max) = num_to_alloc;
++ }
++}
++
++/** Setup the input buffer state to scan directly from a user-specified character buffer.
++ * @param base the character buffer
++ * @param size the size in bytes of the character buffer
++ *
++ * @return the newly allocated buffer state object.
++ */
++YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size )
++{
++ YY_BUFFER_STATE b;
++
+ if ( size < 2 ||
+ base[size-2] != YY_END_OF_BUFFER_CHAR ||
+ base[size-1] != YY_END_OF_BUFFER_CHAR )
+ /* They forgot to leave room for the EOB's. */
+ return 0;
+
+- b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) );
++ b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) );
+ if ( ! b )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" );
+
+@@ -1422,47 +1574,42 @@
+ b->yy_fill_buffer = 0;
+ b->yy_buffer_status = YY_BUFFER_NEW;
+
+- yy_switch_to_buffer( b );
++ yy_switch_to_buffer(b );
+
+ return b;
+- }
+-#endif
+-
+-
+-#ifndef YY_NO_SCAN_STRING
+-#ifdef YY_USE_PROTOS
+-YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str )
+-#else
+-YY_BUFFER_STATE yy_scan_string( yy_str )
+-yyconst char *yy_str;
+-#endif
+- {
+- int len;
+- for ( len = 0; yy_str[len]; ++len )
+- ;
+-
+- return yy_scan_bytes( yy_str, len );
+- }
+-#endif
++}
+
++/** Setup the input buffer state to scan a string. The next call to yylex() will
++ * scan from a @e copy of @a str.
++ * @param str a NUL-terminated string to scan
++ *
++ * @return the newly allocated buffer state object.
++ * @note If you want to scan bytes that may contain NUL values, then use
++ * yy_scan_bytes() instead.
++ */
++YY_BUFFER_STATE yy_scan_string (yyconst char * yy_str )
++{
++
++ return yy_scan_bytes(yy_str,strlen(yy_str) );
++}
+
+-#ifndef YY_NO_SCAN_BYTES
+-#ifdef YY_USE_PROTOS
+-YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len )
+-#else
+-YY_BUFFER_STATE yy_scan_bytes( bytes, len )
+-yyconst char *bytes;
+-int len;
+-#endif
+- {
++/** Setup the input buffer state to scan the given bytes. The next call to yylex() will
++ * scan from a @e copy of @a bytes.
++ * @param bytes the byte buffer to scan
++ * @param len the number of bytes in the buffer pointed to by @a bytes.
++ *
++ * @return the newly allocated buffer state object.
++ */
++YY_BUFFER_STATE yy_scan_bytes (yyconst char * bytes, int len )
++{
+ YY_BUFFER_STATE b;
+ char *buf;
+ yy_size_t n;
+ int i;
+-
++
+ /* Get memory for full buffer, including space for trailing EOB's. */
+ n = len + 2;
+- buf = (char *) yy_flex_alloc( n );
++ buf = (char *) yyalloc(n );
+ if ( ! buf )
+ YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" );
+
+@@ -1471,7 +1618,7 @@
+
+ buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR;
+
+- b = yy_scan_buffer( buf, n );
++ b = yy_scan_buffer(buf,n );
+ if ( ! b )
+ YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" );
+
+@@ -1481,148 +1628,164 @@
+ b->yy_is_our_buffer = 1;
+
+ return b;
+- }
+-#endif
+-
++}
+
+-#ifndef YY_NO_PUSH_STATE
+-#ifdef YY_USE_PROTOS
+-static void yy_push_state( int new_state )
+-#else
+-static void yy_push_state( new_state )
+-int new_state;
++#ifndef YY_EXIT_FAILURE
++#define YY_EXIT_FAILURE 2
+ #endif
+- {
+- if ( yy_start_stack_ptr >= yy_start_stack_depth )
+- {
+- yy_size_t new_size;
+
+- yy_start_stack_depth += YY_START_STACK_INCR;
+- new_size = yy_start_stack_depth * sizeof( int );
++static void yy_fatal_error (yyconst char* msg )
++{
++ (void) fprintf( stderr, "%s\n", msg );
++ exit( YY_EXIT_FAILURE );
++}
+
+- if ( ! yy_start_stack )
+- yy_start_stack = (int *) yy_flex_alloc( new_size );
++/* Redefine yyless() so it works in section 3 code. */
+
+- else
+- yy_start_stack = (int *) yy_flex_realloc(
+- (void *) yy_start_stack, new_size );
++#undef yyless
++#define yyless(n) \
++ do \
++ { \
++ /* Undo effects of setting up yytext. */ \
++ int yyless_macro_arg = (n); \
++ YY_LESS_LINENO(yyless_macro_arg);\
++ yytext[yyleng] = (yy_hold_char); \
++ (yy_c_buf_p) = yytext + yyless_macro_arg; \
++ (yy_hold_char) = *(yy_c_buf_p); \
++ *(yy_c_buf_p) = '\0'; \
++ yyleng = yyless_macro_arg; \
++ } \
++ while ( 0 )
+
+- if ( ! yy_start_stack )
+- YY_FATAL_ERROR(
+- "out of memory expanding start-condition stack" );
+- }
++/* Accessor methods (get/set functions) to struct members. */
+
+- yy_start_stack[yy_start_stack_ptr++] = YY_START;
++/** Get the current line number.
++ *
++ */
++int yyget_lineno (void)
++{
++
++ return yylineno;
++}
+
+- BEGIN(new_state);
+- }
+-#endif
++/** Get the input stream.
++ *
++ */
++FILE *yyget_in (void)
++{
++ return yyin;
++}
+
++/** Get the output stream.
++ *
++ */
++FILE *yyget_out (void)
++{
++ return yyout;
++}
+
+-#ifndef YY_NO_POP_STATE
+-static void yy_pop_state()
+- {
+- if ( --yy_start_stack_ptr < 0 )
+- YY_FATAL_ERROR( "start-condition stack underflow" );
++/** Get the length of the current token.
++ *
++ */
++int yyget_leng (void)
++{
++ return yyleng;
++}
+
+- BEGIN(yy_start_stack[yy_start_stack_ptr]);
+- }
+-#endif
++/** Get the current token.
++ *
++ */
+
++char *yyget_text (void)
++{
++ return yytext;
++}
+
+-#ifndef YY_NO_TOP_STATE
+-static int yy_top_state()
+- {
+- return yy_start_stack[yy_start_stack_ptr - 1];
+- }
+-#endif
++/** Set the current line number.
++ * @param line_number
++ *
++ */
++void yyset_lineno (int line_number )
++{
++
++ yylineno = line_number;
++}
+
+-#ifndef YY_EXIT_FAILURE
+-#define YY_EXIT_FAILURE 2
+-#endif
++/** Set the input stream. This does not discard the current
++ * input buffer.
++ * @param in_str A readable stream.
++ *
++ * @see yy_switch_to_buffer
++ */
++void yyset_in (FILE * in_str )
++{
++ yyin = in_str ;
++}
+
+-#ifdef YY_USE_PROTOS
+-static void yy_fatal_error( yyconst char msg[] )
+-#else
+-static void yy_fatal_error( msg )
+-char msg[];
+-#endif
+- {
+- (void) fprintf( stderr, "%s\n", msg );
+- exit( YY_EXIT_FAILURE );
+- }
++void yyset_out (FILE * out_str )
++{
++ yyout = out_str ;
++}
+
++int yyget_debug (void)
++{
++ return yy_flex_debug;
++}
+
++void yyset_debug (int bdebug )
++{
++ yy_flex_debug = bdebug ;
++}
+
+-/* Redefine yyless() so it works in section 3 code. */
++/* yylex_destroy is for both reentrant and non-reentrant scanners. */
++int yylex_destroy (void)
++{
++
++ /* Pop the buffer stack, destroying each element. */
++ while(YY_CURRENT_BUFFER){
++ yy_delete_buffer(YY_CURRENT_BUFFER );
++ YY_CURRENT_BUFFER_LVALUE = NULL;
++ yypop_buffer_state();
++ }
+
+-#undef yyless
+-#define yyless(n) \
+- do \
+- { \
+- /* Undo effects of setting up yytext. */ \
+- yytext[yyleng] = yy_hold_char; \
+- yy_c_buf_p = yytext + n; \
+- yy_hold_char = *yy_c_buf_p; \
+- *yy_c_buf_p = '\0'; \
+- yyleng = n; \
+- } \
+- while ( 0 )
++ /* Destroy the stack itself. */
++ yyfree((yy_buffer_stack) );
++ (yy_buffer_stack) = NULL;
+
++ return 0;
++}
+
+-/* Internal utility routines. */
++/*
++ * Internal utility routines.
++ */
+
+ #ifndef yytext_ptr
+-#ifdef YY_USE_PROTOS
+-static void yy_flex_strncpy( char *s1, yyconst char *s2, int n )
+-#else
+-static void yy_flex_strncpy( s1, s2, n )
+-char *s1;
+-yyconst char *s2;
+-int n;
+-#endif
+- {
++static void yy_flex_strncpy (char* s1, yyconst char * s2, int n )
++{
+ register int i;
+- for ( i = 0; i < n; ++i )
++ for ( i = 0; i < n; ++i )
+ s1[i] = s2[i];
+- }
++}
+ #endif
+
+ #ifdef YY_NEED_STRLEN
+-#ifdef YY_USE_PROTOS
+-static int yy_flex_strlen( yyconst char *s )
+-#else
+-static int yy_flex_strlen( s )
+-yyconst char *s;
+-#endif
+- {
++static int yy_flex_strlen (yyconst char * s )
++{
+ register int n;
+- for ( n = 0; s[n]; ++n )
++ for ( n = 0; s[n]; ++n )
+ ;
+
+ return n;
+- }
++}
+ #endif
+
+-
+-#ifdef YY_USE_PROTOS
+-static void *yy_flex_alloc( yy_size_t size )
+-#else
+-static void *yy_flex_alloc( size )
+-yy_size_t size;
+-#endif
+- {
++void *yyalloc (yy_size_t size )
++{
+ return (void *) malloc( size );
+- }
++}
+
+-#ifdef YY_USE_PROTOS
+-static void *yy_flex_realloc( void *ptr, yy_size_t size )
+-#else
+-static void *yy_flex_realloc( ptr, size )
+-void *ptr;
+-yy_size_t size;
+-#endif
+- {
++void *yyrealloc (void * ptr, yy_size_t size )
++{
+ /* The cast to (char *) in the following accommodates both
+ * implementations that use char* generic pointers, and those
+ * that use void* generic pointers. It works with the latter
+@@ -1631,30 +1794,34 @@
+ * as though doing an assignment.
+ */
+ return (void *) realloc( (char *) ptr, size );
+- }
++}
+
+-#ifdef YY_USE_PROTOS
+-static void yy_flex_free( void *ptr )
+-#else
+-static void yy_flex_free( ptr )
+-void *ptr;
+-#endif
+- {
+- free( ptr );
+- }
++void yyfree (void * ptr )
++{
++ free( (char *) ptr ); /* see yyrealloc() for (char *) cast */
++}
+
+-#if YY_MAIN
+-int main()
+- {
+- yylex();
+- return 0;
+- }
++#define YYTABLES_NAME "yytables"
++
++#undef YY_NEW_FILE
++#undef YY_FLUSH_BUFFER
++#undef yy_set_bol
++#undef yy_new_buffer
++#undef yy_set_interactive
++#undef yytext_ptr
++#undef YY_DO_BEFORE_ACTION
++
++#ifdef YY_DECL_IS_OURS
++#undef YY_DECL_IS_OURS
++#undef YY_DECL
+ #endif
+ #line 69 "ql_l.l"
+
+
+-void yyerror(char *s)
++
++void yyerror(const char *s)
+ {
+ fprintf(stderr,"line %d: %s near \"%s\"\n",lineno,s,yytext);
+ exit(1);
+ }
++
+--- linux-atm-2.4.1.orig/src/qgen/ql_y.c
++++ linux-atm-2.4.1/src/qgen/ql_y.c
+@@ -1,21 +1,87 @@
++/* A Bison parser, made by GNU Bison 1.875d. */
+
+-/* A Bison parser, made from ql_y.y
+- by GNU Bison version 1.28 */
++/* Skeleton parser for Yacc-like parsing with Bison,
++ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+
+-#define YYBISON 1 /* Identify Bison output. */
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2, or (at your option)
++ any later version.
+
+-#define TOK_BREAK 257
+-#define TOK_CASE 258
+-#define TOK_DEF 259
+-#define TOK_DEFAULT 260
+-#define TOK_LENGTH 261
+-#define TOK_MULTI 262
+-#define TOK_RECOVER 263
+-#define TOK_ABORT 264
+-#define TOK_ID 265
+-#define TOK_INCLUDE 266
+-#define TOK_STRING 267
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
+
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place - Suite 330,
++ Boston, MA 02111-1307, USA. */
++
++/* As a special exception, when this file is copied by Bison into a
++ Bison output file, you may use that output file without restriction.
++ This special exception was added by the Free Software Foundation
++ in version 1.24 of Bison. */
++
++/* Written by Richard Stallman by simplifying the original so called
++ ``semantic'' parser. */
++
++/* All symbols defined below should begin with yy or YY, to avoid
++ infringing on user name space. This should be done even for local
++ variables, as they might otherwise be expanded by user macros.
++ There are some unavoidable exceptions within include files to
++ define necessary library symbols; they are noted "INFRINGES ON
++ USER NAME SPACE" below. */
++
++/* Identify Bison output. */
++#define YYBISON 1
++
++/* Skeleton name. */
++#define YYSKELETON_NAME "yacc.c"
++
++/* Pure parsers. */
++#define YYPURE 0
++
++/* Using locations. */
++#define YYLSP_NEEDED 0
++
++
++
++/* Tokens. */
++#ifndef YYTOKENTYPE
++# define YYTOKENTYPE
++ /* Put the tokens into the symbol table, so that GDB and other debuggers
++ know about them. */
++ enum yytokentype {
++ TOK_BREAK = 258,
++ TOK_CASE = 259,
++ TOK_DEF = 260,
++ TOK_DEFAULT = 261,
++ TOK_LENGTH = 262,
++ TOK_MULTI = 263,
++ TOK_RECOVER = 264,
++ TOK_ABORT = 265,
++ TOK_ID = 266,
++ TOK_INCLUDE = 267,
++ TOK_STRING = 268
++ };
++#endif
++#define TOK_BREAK 258
++#define TOK_CASE 259
++#define TOK_DEF 260
++#define TOK_DEFAULT 261
++#define TOK_LENGTH 262
++#define TOK_MULTI 263
++#define TOK_RECOVER 264
++#define TOK_ABORT 265
++#define TOK_ID 266
++#define TOK_INCLUDE 267
++#define TOK_STRING 268
++
++
++
++
++/* Copy the first part of user declarations. */
+ #line 1 "ql_y.y"
+
+ /* ql.y - Q.2931 data structures description language */
+@@ -36,6 +102,8 @@
+ #include "qgen.h"
+ #include "file.h"
+
++extern void yyerror(const char *s);
++
+
+ #define MAX_TOKEN 256
+ #define DEFAULT_NAMELIST_FILE "default.nl"
+@@ -77,9 +145,10 @@
+ for (walk = strchr(start,0)-1; walk > start && isspace(*walk); walk--)
+ *walk = 0;
+ if (*start == ':') {
+- if (!(searching = strcmp(start+1,name)))
++ if (!(searching = strcmp(start+1,name))) {
+ if (found) yyerror("multiple entries");
+ else found = 1;
++ }
+ continue;
+ }
+ if (searching) continue;
+@@ -154,8 +223,23 @@
+
+
+
+-#line 139 "ql_y.y"
+-typedef union {
++
++/* Enabling traces. */
++#ifndef YYDEBUG
++# define YYDEBUG 0
++#endif
++
++/* Enabling verbose error messages. */
++#ifdef YYERROR_VERBOSE
++# undef YYERROR_VERBOSE
++# define YYERROR_VERBOSE 1
++#else
++# define YYERROR_VERBOSE 0
++#endif
++
++#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
++#line 142 "ql_y.y"
++typedef union YYSTYPE {
+ const char *str;
+ int num;
+ FIELD *field;
+@@ -164,470 +248,762 @@
+ TAG *tag;
+ NAME_LIST *nlist;
+ } YYSTYPE;
+-#include <stdio.h>
++/* Line 191 of yacc.c. */
++#line 253 "y.tab.c"
++# define yystype YYSTYPE /* obsolescent; will be withdrawn */
++# define YYSTYPE_IS_DECLARED 1
++# define YYSTYPE_IS_TRIVIAL 1
++#endif
++
++
++
++/* Copy the second part of user declarations. */
++
++
++/* Line 214 of yacc.c. */
++#line 265 "y.tab.c"
++
++#if ! defined (yyoverflow) || YYERROR_VERBOSE
++
++# ifndef YYFREE
++# define YYFREE free
++# endif
++# ifndef YYMALLOC
++# define YYMALLOC malloc
++# endif
++
++/* The parser invokes alloca or malloc; define the necessary symbols. */
++
++# ifdef YYSTACK_USE_ALLOCA
++# if YYSTACK_USE_ALLOCA
++# define YYSTACK_ALLOC alloca
++# endif
++# else
++# if defined (alloca) || defined (_ALLOCA_H)
++# define YYSTACK_ALLOC alloca
++# else
++# ifdef __GNUC__
++# define YYSTACK_ALLOC __builtin_alloca
++# endif
++# endif
++# endif
++
++# ifdef YYSTACK_ALLOC
++ /* Pacify GCC's `empty if-body' warning. */
++# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
++# else
++# if defined (__STDC__) || defined (__cplusplus)
++# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
++# define YYSIZE_T size_t
++# endif
++# define YYSTACK_ALLOC YYMALLOC
++# define YYSTACK_FREE YYFREE
++# endif
++#endif /* ! defined (yyoverflow) || YYERROR_VERBOSE */
++
++
++#if (! defined (yyoverflow) \
++ && (! defined (__cplusplus) \
++ || (defined (YYSTYPE_IS_TRIVIAL) && YYSTYPE_IS_TRIVIAL)))
++
++/* A type that is properly aligned for any stack member. */
++union yyalloc
++{
++ short int yyss;
++ YYSTYPE yyvs;
++ };
++
++/* The size of the maximum gap between one aligned stack and the next. */
++# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
++
++/* The size of an array large to enough to hold all stacks, each with
++ N elements. */
++# define YYSTACK_BYTES(N) \
++ ((N) * (sizeof (short int) + sizeof (YYSTYPE)) \
++ + YYSTACK_GAP_MAXIMUM)
++
++/* Copy COUNT objects from FROM to TO. The source and destination do
++ not overlap. */
++# ifndef YYCOPY
++# if defined (__GNUC__) && 1 < __GNUC__
++# define YYCOPY(To, From, Count) \
++ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
++# else
++# define YYCOPY(To, From, Count) \
++ do \
++ { \
++ register YYSIZE_T yyi; \
++ for (yyi = 0; yyi < (Count); yyi++) \
++ (To)[yyi] = (From)[yyi]; \
++ } \
++ while (0)
++# endif
++# endif
++
++/* Relocate STACK from its old location to the new one. The
++ local variables YYSIZE and YYSTACKSIZE give the old and new number of
++ elements in the stack, and YYPTR gives the new location of the
++ stack. Advance YYPTR to a properly aligned location for the next
++ stack. */
++# define YYSTACK_RELOCATE(Stack) \
++ do \
++ { \
++ YYSIZE_T yynewbytes; \
++ YYCOPY (&yyptr->Stack, Stack, yysize); \
++ Stack = &yyptr->Stack; \
++ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
++ yyptr += yynewbytes / sizeof (*yyptr); \
++ } \
++ while (0)
+
+-#ifndef __cplusplus
+-#ifndef __STDC__
+-#define const
+-#endif
+ #endif
+
++#if defined (__STDC__) || defined (__cplusplus)
++ typedef signed char yysigned_char;
++#else
++ typedef short int yysigned_char;
++#endif
+
+-
+-#define YYFINAL 86
+-#define YYFLAG -32768
+-#define YYNTBASE 23
+-
+-#define YYTRANSLATE(x) ((unsigned)(x) <= 267 ? yytranslate[x] : 47)
+-
+-static const char yytranslate[] = { 0,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 21, 18, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 22, 2, 17,
+- 14, 19, 2, 20, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 15, 2, 16, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 1, 3, 4, 5, 6,
+- 7, 8, 9, 10, 11, 12, 13
++/* YYFINAL -- State number of the termination state. */
++#define YYFINAL 5
++/* YYLAST -- Last index in YYTABLE. */
++#define YYLAST 65
++
++/* YYNTOKENS -- Number of terminals. */
++#define YYNTOKENS 23
++/* YYNNTS -- Number of nonterminals. */
++#define YYNNTS 25
++/* YYNRULES -- Number of rules. */
++#define YYNRULES 46
++/* YYNRULES -- Number of states. */
++#define YYNSTATES 86
++
++/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
++#define YYUNDEFTOK 2
++#define YYMAXUTOK 268
++
++#define YYTRANSLATE(YYX) \
++ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
++
++/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
++static const unsigned char yytranslate[] =
++{
++ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 21, 18, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 22, 2,
++ 17, 14, 19, 2, 20, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 15, 2, 16, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
++ 5, 6, 7, 8, 9, 10, 11, 12, 13
+ };
+
+-#if YYDEBUG != 0
+-static const short yyprhs[] = { 0,
+- 0, 4, 5, 8, 9, 12, 17, 18, 21, 23,
+- 27, 30, 31, 34, 40, 41, 43, 47, 53, 54,
+- 57, 59, 60, 63, 64, 67, 69, 74, 79, 83,
+- 84, 87, 88, 90, 91, 97, 98, 105, 106, 112,
+- 113, 120, 121, 124, 125
++#if YYDEBUG
++/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
++ YYRHS. */
++static const unsigned char yyprhs[] =
++{
++ 0, 0, 3, 7, 8, 11, 12, 15, 20, 21,
++ 24, 26, 30, 33, 34, 37, 43, 44, 46, 50,
++ 56, 57, 60, 62, 63, 66, 67, 70, 72, 77,
++ 82, 86, 87, 90, 91, 93, 94, 100, 101, 108,
++ 109, 115, 116, 123, 124, 127, 128
+ };
+
+-static const short yyrhs[] = { 24,
+- 25, 29, 0, 0, 12, 24, 0, 0, 25, 26,
+- 0, 5, 11, 14, 29, 0, 0, 28, 29, 0,
+- 11, 0, 15, 30, 16, 0, 10, 11, 0, 0,
+- 31, 30, 0, 32, 11, 40, 17, 33, 0, 0,
+- 3, 0, 18, 35, 19, 0, 35, 34, 36, 19,
+- 37, 0, 0, 20, 35, 0, 11, 0, 0, 21,
+- 11, 0, 0, 14, 38, 0, 11, 0, 4, 15,
+- 41, 16, 0, 8, 15, 43, 16, 0, 39, 7,
+- 29, 0, 0, 9, 11, 0, 0, 13, 0, 0,
+- 6, 11, 45, 46, 29, 0, 0, 11, 45, 46,
+- 29, 42, 41, 0, 0, 6, 11, 45, 46, 27,
+- 0, 0, 11, 45, 46, 27, 44, 43, 0, 0,
+- 22, 11, 0, 0, 21, 11, 46, 0
++/* YYRHS -- A `-1'-separated list of the rules' RHS. */
++static const yysigned_char yyrhs[] =
++{
++ 24, 0, -1, 25, 26, 30, -1, -1, 12, 25,
++ -1, -1, 26, 27, -1, 5, 11, 14, 30, -1,
++ -1, 29, 30, -1, 11, -1, 15, 31, 16, -1,
++ 10, 11, -1, -1, 32, 31, -1, 33, 11, 41,
++ 17, 34, -1, -1, 3, -1, 18, 36, 19, -1,
++ 36, 35, 37, 19, 38, -1, -1, 20, 36, -1,
++ 11, -1, -1, 21, 11, -1, -1, 14, 39, -1,
++ 11, -1, 4, 15, 42, 16, -1, 8, 15, 44,
++ 16, -1, 40, 7, 30, -1, -1, 9, 11, -1,
++ -1, 13, -1, -1, 6, 11, 46, 47, 30, -1,
++ -1, 11, 46, 47, 30, 43, 42, -1, -1, 6,
++ 11, 46, 47, 28, -1, -1, 11, 46, 47, 28,
++ 45, 44, -1, -1, 22, 11, -1, -1, 21, 11,
++ 47, -1
+ };
+
+-#endif
+-
+-#if YYDEBUG != 0
+-static const short yyrline[] = { 0,
+- 163, 175, 176, 184, 185, 188, 202, 207, 212, 231,
+- 236, 243, 247, 254, 278, 282, 288, 301, 318, 322,
+- 329, 339, 343, 350, 354, 360, 367, 374, 380, 390,
+- 394, 400, 404, 410, 414, 431, 437, 454, 458, 474,
+- 480, 497, 501, 507, 511
++/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
++static const unsigned short int yyrline[] =
++{
++ 0, 167, 167, 178, 179, 187, 188, 192, 206, 206,
++ 216, 234, 239, 247, 250, 258, 282, 285, 292, 304,
++ 323, 326, 334, 344, 347, 355, 358, 365, 371, 378,
++ 384, 395, 398, 405, 408, 415, 418, 436, 435, 459,
++ 462, 479, 478, 502, 505, 512, 515
+ };
+ #endif
+
+-
+-#if YYDEBUG != 0 || defined (YYERROR_VERBOSE)
+-
+-static const char * const yytname[] = { "$","error","$undefined.","TOK_BREAK",
+-"TOK_CASE","TOK_DEF","TOK_DEFAULT","TOK_LENGTH","TOK_MULTI","TOK_RECOVER","TOK_ABORT",
+-"TOK_ID","TOK_INCLUDE","TOK_STRING","'='","'{'","'}'","'<'","'-'","'>'","'@'",
+-"','","':'","all","includes","structures","structure","rep_block","@1","block",
+-"fields","field","opt_break","field_cont","opt_pos","decimal","opt_more","opt_val",
+-"value","opt_recover","opt_name_list","tags","@2","rep_tags","@3","opt_id","list", NULL
++#if YYDEBUG || YYERROR_VERBOSE
++/* YYTNME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
++ First, the terminals, then, starting at YYNTOKENS, nonterminals. */
++static const char *const yytname[] =
++{
++ "$end", "error", "$undefined", "TOK_BREAK", "TOK_CASE", "TOK_DEF",
++ "TOK_DEFAULT", "TOK_LENGTH", "TOK_MULTI", "TOK_RECOVER", "TOK_ABORT",
++ "TOK_ID", "TOK_INCLUDE", "TOK_STRING", "'='", "'{'", "'}'", "'<'", "'-'",
++ "'>'", "'@'", "','", "':'", "$accept", "all", "includes", "structures",
++ "structure", "rep_block", "@1", "block", "fields", "field", "opt_break",
++ "field_cont", "opt_pos", "decimal", "opt_more", "opt_val", "value",
++ "opt_recover", "opt_name_list", "tags", "@2", "rep_tags", "@3", "opt_id",
++ "list", 0
+ };
+ #endif
+
+-static const short yyr1[] = { 0,
+- 23, 24, 24, 25, 25, 26, 28, 27, 29, 29,
+- 29, 30, 30, 31, 32, 32, 33, 33, 34, 34,
+- 35, 36, 36, 37, 37, 38, 38, 38, 38, 39,
+- 39, 40, 40, 41, 41, 42, 41, 43, 43, 44,
+- 43, 45, 45, 46, 46
++# ifdef YYPRINT
++/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
++ token YYLEX-NUM. */
++static const unsigned short int yytoknum[] =
++{
++ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
++ 265, 266, 267, 268, 61, 123, 125, 60, 45, 62,
++ 64, 44, 58
+ };
++# endif
+
+-static const short yyr2[] = { 0,
+- 3, 0, 2, 0, 2, 4, 0, 2, 1, 3,
+- 2, 0, 2, 5, 0, 1, 3, 5, 0, 2,
+- 1, 0, 2, 0, 2, 1, 4, 4, 3, 0,
+- 2, 0, 1, 0, 5, 0, 6, 0, 5, 0,
+- 6, 0, 2, 0, 3
++/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
++static const unsigned char yyr1[] =
++{
++ 0, 23, 24, 25, 25, 26, 26, 27, 29, 28,
++ 30, 30, 30, 31, 31, 32, 33, 33, 34, 34,
++ 35, 35, 36, 37, 37, 38, 38, 39, 39, 39,
++ 39, 40, 40, 41, 41, 42, 42, 43, 42, 44,
++ 44, 45, 44, 46, 46, 47, 47
+ };
+
+-static const short yydefact[] = { 2,
+- 2, 4, 3, 0, 0, 0, 9, 12, 5, 1,
+- 0, 11, 16, 0, 12, 0, 0, 10, 13, 32,
+- 6, 33, 0, 0, 21, 0, 14, 19, 0, 0,
+- 22, 17, 20, 0, 0, 23, 24, 30, 18, 0,
+- 0, 0, 26, 25, 0, 34, 38, 31, 0, 0,
+- 42, 0, 0, 42, 0, 29, 42, 0, 44, 27,
+- 42, 44, 28, 44, 43, 0, 0, 44, 7, 0,
+- 44, 36, 7, 40, 0, 35, 45, 34, 39, 38,
+- 8, 37, 41, 0, 0, 0
++/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
++static const unsigned char yyr2[] =
++{
++ 0, 2, 3, 0, 2, 0, 2, 4, 0, 2,
++ 1, 3, 2, 0, 2, 5, 0, 1, 3, 5,
++ 0, 2, 1, 0, 2, 0, 2, 1, 4, 4,
++ 3, 0, 2, 0, 1, 0, 5, 0, 6, 0,
++ 5, 0, 6, 0, 2, 0, 3
+ };
+
+-static const short yydefgoto[] = { 84,
+- 2, 4, 9, 74, 75, 10, 14, 15, 16, 27,
+- 31, 28, 35, 39, 44, 45, 23, 52, 78, 55,
+- 80, 59, 67
++/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
++ STATE-NUM when YYTABLE doesn't specify something else to do. Zero
++ means the default is an error. */
++static const unsigned char yydefact[] =
++{
++ 3, 3, 0, 5, 4, 1, 0, 0, 0, 10,
++ 13, 6, 2, 0, 12, 17, 0, 13, 0, 0,
++ 11, 14, 33, 7, 34, 0, 0, 22, 0, 15,
++ 20, 0, 0, 23, 18, 21, 0, 0, 24, 25,
++ 31, 19, 0, 0, 0, 27, 26, 0, 35, 39,
++ 32, 0, 0, 43, 0, 0, 43, 0, 30, 43,
++ 0, 45, 28, 43, 45, 29, 45, 44, 0, 0,
++ 45, 8, 0, 45, 37, 8, 41, 0, 36, 46,
++ 35, 40, 39, 9, 38, 42
+ };
+
+-static const short yypact[] = { -8,
+- -8,-32768,-32768, -4, 3, 17,-32768, -1,-32768,-32768,
+- 20,-32768,-32768, 21, -1, 22, 11,-32768,-32768, 23,
+--32768,-32768, 24, -3,-32768, 27,-32768, 15, 25, 27,
+- 26,-32768,-32768, 28, 29,-32768, 31, 9,-32768, 34,
+- 36, 32,-32768,-32768, 33, 18, 19,-32768, 11, 35,
+- 30, 38, 44, 30, 40,-32768, 30, 46, 39,-32768,
+- 30, 39,-32768, 39,-32768, 48, 11, 39,-32768, 11,
+- 39,-32768,-32768,-32768, 11,-32768,-32768, 18,-32768, 19,
+--32768,-32768,-32768, 42, 61,-32768
++/* YYDEFGOTO[NTERM-NUM]. */
++static const yysigned_char yydefgoto[] =
++{
++ -1, 2, 3, 6, 11, 76, 77, 12, 16, 17,
++ 18, 29, 33, 30, 37, 41, 46, 47, 25, 54,
++ 80, 57, 82, 61, 69
+ };
+
+-static const short yypgoto[] = {-32768,
+- 62,-32768,-32768, -11,-32768, -17, 49,-32768,-32768,-32768,
+--32768, 1,-32768,-32768,-32768,-32768,-32768, -13,-32768, -14,
+--32768, -38, -59
++/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
++ STATE-NUM. */
++#define YYPACT_NINF -62
++static const yysigned_char yypact[] =
++{
++ -8, -8, 14, -62, -62, -62, -4, 16, 17, -62,
++ -1, -62, -62, 20, -62, -62, 21, -1, 22, 11,
++ -62, -62, 23, -62, -62, 24, -3, -62, 27, -62,
++ 25, 28, 27, 30, -62, -62, 29, 33, -62, 32,
++ 9, -62, 34, 39, 31, -62, -62, 36, 18, 19,
++ -62, 11, 37, 35, 40, 44, 35, 43, -62, 35,
++ 49, 41, -62, 35, 41, -62, 41, -62, 50, 11,
++ 41, -62, 11, 41, -62, -62, -62, 11, -62, -62,
++ 18, -62, 19, -62, -62, -62
+ };
+
+-
+-#define YYLAST 66
+-
+-
+-static const short yytable[] = { 21,
+- 5, 13, 69, 1, 70, 6, 7, 25, 73, -15,
+- 8, 77, 40, 11, 26, 62, 41, 42, 64, 43,
+- 6, 7, 68, 50, 53, 8, 29, 12, 51, 54,
+- 33, 56, 20, 17, 30, 22, 18, 25, 36, 49,
+- 24, 85, 48, 32, 38, 57, 34, 37, 46, 72,
+- 47, 58, 76, 60, 61, 63, 65, 81, 71, 66,
+- 86, 79, 3, 19, 82, 83
++/* YYPGOTO[NTERM-NUM]. */
++static const yysigned_char yypgoto[] =
++{
++ -62, -62, 38, -62, -62, -31, -62, -19, 46, -62,
++ -62, -62, -62, 3, -62, -62, -62, -62, -62, -16,
++ -62, -17, -62, -40, -61
+ };
+
+-static const short yycheck[] = { 17,
+- 5, 3, 62, 12, 64, 10, 11, 11, 68, 11,
+- 15, 71, 4, 11, 18, 54, 8, 9, 57, 11,
+- 10, 11, 61, 6, 6, 15, 26, 11, 11, 11,
+- 30, 49, 11, 14, 20, 13, 16, 11, 11, 7,
+- 17, 0, 11, 19, 14, 11, 21, 19, 15, 67,
+- 15, 22, 70, 16, 11, 16, 11, 75, 11, 21,
+- 0, 73, 1, 15, 78, 80
++/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
++ positive, shift that token. If negative, reduce the rule which
++ number is the opposite. If zero, do what YYDEFACT says.
++ If YYTABLE_NINF, syntax error. */
++#define YYTABLE_NINF -17
++static const yysigned_char yytable[] =
++{
++ 23, 7, 15, 71, 1, 72, 8, 9, 27, 75,
++ -16, 10, 79, 42, 5, 28, 64, 43, 44, 66,
++ 45, 8, 9, 70, 52, 55, 10, 13, 14, 53,
++ 56, 31, 58, 22, 19, 35, 24, 20, 27, 4,
++ 38, 26, 50, 51, 81, 32, 40, 34, 59, 48,
++ 74, 36, 39, 78, 49, 63, 62, 60, 83, 65,
++ 67, 73, 68, 21, 84, 85
+ };
+-/* -*-C-*- Note some compilers choke on comments on `#line' lines. */
+-#line 3 "/usr/lib/bison.simple"
+-/* This file comes from bison-1.28. */
+
+-/* Skeleton output parser for bison,
+- Copyright (C) 1984, 1989, 1990 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+-
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software
+- Foundation, Inc., 59 Temple Place - Suite 330,
+- Boston, MA 02111-1307, USA. */
+-
+-/* As a special exception, when this file is copied by Bison into a
+- Bison output file, you may use that output file without restriction.
+- This special exception was added by the Free Software Foundation
+- in version 1.24 of Bison. */
++static const unsigned char yycheck[] =
++{
++ 19, 5, 3, 64, 12, 66, 10, 11, 11, 70,
++ 11, 15, 73, 4, 0, 18, 56, 8, 9, 59,
++ 11, 10, 11, 63, 6, 6, 15, 11, 11, 11,
++ 11, 28, 51, 11, 14, 32, 13, 16, 11, 1,
++ 11, 17, 11, 7, 75, 20, 14, 19, 11, 15,
++ 69, 21, 19, 72, 15, 11, 16, 22, 77, 16,
++ 11, 11, 21, 17, 80, 82
++};
+
+-/* This is the parser code that is written into each bison parser
+- when the %semantic_parser declaration is not specified in the grammar.
+- It was written by Richard Stallman by simplifying the hairy parser
+- used when %semantic_parser is specified. */
+-
+-#ifndef YYSTACK_USE_ALLOCA
+-#ifdef alloca
+-#define YYSTACK_USE_ALLOCA
+-#else /* alloca not defined */
+-#ifdef __GNUC__
+-#define YYSTACK_USE_ALLOCA
+-#define alloca __builtin_alloca
+-#else /* not GNU C. */
+-#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi) || (defined (__sun) && defined (__i386))
+-#define YYSTACK_USE_ALLOCA
+-#include <alloca.h>
+-#else /* not sparc */
+-/* We think this test detects Watcom and Microsoft C. */
+-/* This used to test MSDOS, but that is a bad idea
+- since that symbol is in the user namespace. */
+-#if (defined (_MSDOS) || defined (_MSDOS_)) && !defined (__TURBOC__)
+-#if 0 /* No need for malloc.h, which pollutes the namespace;
+- instead, just don't use alloca. */
+-#include <malloc.h>
+-#endif
+-#else /* not MSDOS, or __TURBOC__ */
+-#if defined(_AIX)
+-/* I don't know what this was needed for, but it pollutes the namespace.
+- So I turned it off. rms, 2 May 1997. */
+-/* #include <malloc.h> */
+- #pragma alloca
+-#define YYSTACK_USE_ALLOCA
+-#else /* not MSDOS, or __TURBOC__, or _AIX */
+-#if 0
+-#ifdef __hpux /* haible@ilog.fr says this works for HPUX 9.05 and up,
+- and on HPUX 10. Eventually we can turn this on. */
+-#define YYSTACK_USE_ALLOCA
+-#define alloca __builtin_alloca
+-#endif /* __hpux */
+-#endif
+-#endif /* not _AIX */
+-#endif /* not MSDOS, or __TURBOC__ */
+-#endif /* not sparc */
+-#endif /* not GNU C */
+-#endif /* alloca not defined */
+-#endif /* YYSTACK_USE_ALLOCA not defined */
++/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
++ symbol of state STATE-NUM. */
++static const unsigned char yystos[] =
++{
++ 0, 12, 24, 25, 25, 0, 26, 5, 10, 11,
++ 15, 27, 30, 11, 11, 3, 31, 32, 33, 14,
++ 16, 31, 11, 30, 13, 41, 17, 11, 18, 34,
++ 36, 36, 20, 35, 19, 36, 21, 37, 11, 19,
++ 14, 38, 4, 8, 9, 11, 39, 40, 15, 15,
++ 11, 7, 6, 11, 42, 6, 11, 44, 30, 11,
++ 22, 46, 16, 11, 46, 16, 46, 11, 21, 47,
++ 46, 47, 47, 11, 30, 47, 28, 29, 30, 47,
++ 43, 28, 45, 30, 42, 44
++};
+
+-#ifdef YYSTACK_USE_ALLOCA
+-#define YYSTACK_ALLOC alloca
+-#else
+-#define YYSTACK_ALLOC malloc
++#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__)
++# define YYSIZE_T __SIZE_TYPE__
++#endif
++#if ! defined (YYSIZE_T) && defined (size_t)
++# define YYSIZE_T size_t
++#endif
++#if ! defined (YYSIZE_T)
++# if defined (__STDC__) || defined (__cplusplus)
++# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
++# define YYSIZE_T size_t
++# endif
++#endif
++#if ! defined (YYSIZE_T)
++# define YYSIZE_T unsigned int
+ #endif
+-
+-/* Note: there must be only one dollar sign in this file.
+- It is replaced by the list of actions, each action
+- as one case of the switch. */
+
+ #define yyerrok (yyerrstatus = 0)
+ #define yyclearin (yychar = YYEMPTY)
+-#define YYEMPTY -2
++#define YYEMPTY (-2)
+ #define YYEOF 0
++
+ #define YYACCEPT goto yyacceptlab
+-#define YYABORT goto yyabortlab
+-#define YYERROR goto yyerrlab1
+-/* Like YYERROR except do call yyerror.
+- This remains here temporarily to ease the
+- transition to the new meaning of YYERROR, for GCC.
++#define YYABORT goto yyabortlab
++#define YYERROR goto yyerrorlab
++
++
++/* Like YYERROR except do call yyerror. This remains here temporarily
++ to ease the transition to the new meaning of YYERROR, for GCC.
+ Once GCC version 2 has supplanted version 1, this can go. */
++
+ #define YYFAIL goto yyerrlab
++
+ #define YYRECOVERING() (!!yyerrstatus)
+-#define YYBACKUP(token, value) \
++
++#define YYBACKUP(Token, Value) \
+ do \
+ if (yychar == YYEMPTY && yylen == 1) \
+- { yychar = (token), yylval = (value); \
+- yychar1 = YYTRANSLATE (yychar); \
++ { \
++ yychar = (Token); \
++ yylval = (Value); \
++ yytoken = YYTRANSLATE (yychar); \
+ YYPOPSTACK; \
+ goto yybackup; \
+ } \
+ else \
+- { yyerror ("syntax error: cannot back up"); YYERROR; } \
++ { \
++ yyerror ("syntax error: cannot back up");\
++ YYERROR; \
++ } \
+ while (0)
+
+ #define YYTERROR 1
+ #define YYERRCODE 256
+
+-#ifndef YYPURE
+-#define YYLEX yylex()
+-#endif
++/* YYLLOC_DEFAULT -- Compute the default location (before the actions
++ are run). */
+
+-#ifdef YYPURE
+-#ifdef YYLSP_NEEDED
+-#ifdef YYLEX_PARAM
+-#define YYLEX yylex(&yylval, &yylloc, YYLEX_PARAM)
+-#else
+-#define YYLEX yylex(&yylval, &yylloc)
++#ifndef YYLLOC_DEFAULT
++# define YYLLOC_DEFAULT(Current, Rhs, N) \
++ ((Current).first_line = (Rhs)[1].first_line, \
++ (Current).first_column = (Rhs)[1].first_column, \
++ (Current).last_line = (Rhs)[N].last_line, \
++ (Current).last_column = (Rhs)[N].last_column)
+ #endif
+-#else /* not YYLSP_NEEDED */
++
++/* YYLEX -- calling `yylex' with the right arguments. */
++
+ #ifdef YYLEX_PARAM
+-#define YYLEX yylex(&yylval, YYLEX_PARAM)
++# define YYLEX yylex (YYLEX_PARAM)
+ #else
+-#define YYLEX yylex(&yylval)
+-#endif
+-#endif /* not YYLSP_NEEDED */
++# define YYLEX yylex ()
+ #endif
+
+-/* If nonreentrant, generate the variables here */
++/* Enable debugging if requested. */
++#if YYDEBUG
+
+-#ifndef YYPURE
++# ifndef YYFPRINTF
++# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
++# define YYFPRINTF fprintf
++# endif
++
++# define YYDPRINTF(Args) \
++do { \
++ if (yydebug) \
++ YYFPRINTF Args; \
++} while (0)
++
++# define YYDSYMPRINT(Args) \
++do { \
++ if (yydebug) \
++ yysymprint Args; \
++} while (0)
++
++# define YYDSYMPRINTF(Title, Token, Value, Location) \
++do { \
++ if (yydebug) \
++ { \
++ YYFPRINTF (stderr, "%s ", Title); \
++ yysymprint (stderr, \
++ Token, Value); \
++ YYFPRINTF (stderr, "\n"); \
++ } \
++} while (0)
+
+-int yychar; /* the lookahead symbol */
+-YYSTYPE yylval; /* the semantic value of the */
+- /* lookahead symbol */
++/*------------------------------------------------------------------.
++| yy_stack_print -- Print the state stack from its BOTTOM up to its |
++| TOP (included). |
++`------------------------------------------------------------------*/
+
+-#ifdef YYLSP_NEEDED
+-YYLTYPE yylloc; /* location data for the lookahead */
+- /* symbol */
++#if defined (__STDC__) || defined (__cplusplus)
++static void
++yy_stack_print (short int *bottom, short int *top)
++#else
++static void
++yy_stack_print (bottom, top)
++ short int *bottom;
++ short int *top;
+ #endif
++{
++ YYFPRINTF (stderr, "Stack now");
++ for (/* Nothing. */; bottom <= top; ++bottom)
++ YYFPRINTF (stderr, " %d", *bottom);
++ YYFPRINTF (stderr, "\n");
++}
+
+-int yynerrs; /* number of parse errors so far */
+-#endif /* not YYPURE */
++# define YY_STACK_PRINT(Bottom, Top) \
++do { \
++ if (yydebug) \
++ yy_stack_print ((Bottom), (Top)); \
++} while (0)
+
+-#if YYDEBUG != 0
+-int yydebug; /* nonzero means print parse trace */
+-/* Since this is uninitialized, it does not stop multiple parsers
+- from coexisting. */
++
++/*------------------------------------------------.
++| Report that the YYRULE is going to be reduced. |
++`------------------------------------------------*/
++
++#if defined (__STDC__) || defined (__cplusplus)
++static void
++yy_reduce_print (int yyrule)
++#else
++static void
++yy_reduce_print (yyrule)
++ int yyrule;
+ #endif
++{
++ int yyi;
++ unsigned int yylno = yyrline[yyrule];
++ YYFPRINTF (stderr, "Reducing stack by rule %d (line %u), ",
++ yyrule - 1, yylno);
++ /* Print the symbols being reduced, and their result. */
++ for (yyi = yyprhs[yyrule]; 0 <= yyrhs[yyi]; yyi++)
++ YYFPRINTF (stderr, "%s ", yytname [yyrhs[yyi]]);
++ YYFPRINTF (stderr, "-> %s\n", yytname [yyr1[yyrule]]);
++}
+
+-/* YYINITDEPTH indicates the initial size of the parser's stacks */
++# define YY_REDUCE_PRINT(Rule) \
++do { \
++ if (yydebug) \
++ yy_reduce_print (Rule); \
++} while (0)
++
++/* Nonzero means print parse trace. It is left uninitialized so that
++ multiple parsers can coexist. */
++int yydebug;
++#else /* !YYDEBUG */
++# define YYDPRINTF(Args)
++# define YYDSYMPRINT(Args)
++# define YYDSYMPRINTF(Title, Token, Value, Location)
++# define YY_STACK_PRINT(Bottom, Top)
++# define YY_REDUCE_PRINT(Rule)
++#endif /* !YYDEBUG */
+
++
++/* YYINITDEPTH -- initial size of the parser's stacks. */
+ #ifndef YYINITDEPTH
+-#define YYINITDEPTH 200
++# define YYINITDEPTH 200
+ #endif
+
+-/* YYMAXDEPTH is the maximum size the stacks can grow to
+- (effective only if the built-in stack extension method is used). */
++/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
++ if the built-in stack extension method is used).
++
++ Do not make this value too large; the results are undefined if
++ SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH)
++ evaluated with infinite-precision integer arithmetic. */
+
+-#if YYMAXDEPTH == 0
+-#undef YYMAXDEPTH
++#if defined (YYMAXDEPTH) && YYMAXDEPTH == 0
++# undef YYMAXDEPTH
+ #endif
+
+ #ifndef YYMAXDEPTH
+-#define YYMAXDEPTH 10000
++# define YYMAXDEPTH 10000
+ #endif
++
+ \f
+-/* Define __yy_memcpy. Note that the size argument
+- should be passed with type unsigned int, because that is what the non-GCC
+- definitions require. With GCC, __builtin_memcpy takes an arg
+- of type size_t, but it can handle unsigned int. */
+-
+-#if __GNUC__ > 1 /* GNU C and GNU C++ define this. */
+-#define __yy_memcpy(TO,FROM,COUNT) __builtin_memcpy(TO,FROM,COUNT)
+-#else /* not GNU C or C++ */
+-#ifndef __cplusplus
+
+-/* This is the most reliable way to avoid incompatibilities
+- in available built-in functions on various systems. */
+-static void
+-__yy_memcpy (to, from, count)
+- char *to;
+- char *from;
+- unsigned int count;
+-{
+- register char *f = from;
+- register char *t = to;
+- register int i = count;
++#if YYERROR_VERBOSE
++
++# ifndef yystrlen
++# if defined (__GLIBC__) && defined (_STRING_H)
++# define yystrlen strlen
++# else
++/* Return the length of YYSTR. */
++static YYSIZE_T
++# if defined (__STDC__) || defined (__cplusplus)
++yystrlen (const char *yystr)
++# else
++yystrlen (yystr)
++ const char *yystr;
++# endif
++{
++ register const char *yys = yystr;
++
++ while (*yys++ != '\0')
++ continue;
+
+- while (i-- > 0)
+- *t++ = *f++;
++ return yys - yystr - 1;
+ }
++# endif
++# endif
+
+-#else /* __cplusplus */
++# ifndef yystpcpy
++# if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE)
++# define yystpcpy stpcpy
++# else
++/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
++ YYDEST. */
++static char *
++# if defined (__STDC__) || defined (__cplusplus)
++yystpcpy (char *yydest, const char *yysrc)
++# else
++yystpcpy (yydest, yysrc)
++ char *yydest;
++ const char *yysrc;
++# endif
++{
++ register char *yyd = yydest;
++ register const char *yys = yysrc;
++
++ while ((*yyd++ = *yys++) != '\0')
++ continue;
++
++ return yyd - 1;
++}
++# endif
++# endif
++
++#endif /* !YYERROR_VERBOSE */
++
++\f
++
++#if YYDEBUG
++/*--------------------------------.
++| Print this symbol on YYOUTPUT. |
++`--------------------------------*/
+
+-/* This is the most reliable way to avoid incompatibilities
+- in available built-in functions on various systems. */
++#if defined (__STDC__) || defined (__cplusplus)
+ static void
+-__yy_memcpy (char *to, char *from, unsigned int count)
++yysymprint (FILE *yyoutput, int yytype, YYSTYPE *yyvaluep)
++#else
++static void
++yysymprint (yyoutput, yytype, yyvaluep)
++ FILE *yyoutput;
++ int yytype;
++ YYSTYPE *yyvaluep;
++#endif
+ {
+- register char *t = to;
+- register char *f = from;
+- register int i = count;
++ /* Pacify ``unused variable'' warnings. */
++ (void) yyvaluep;
++
++ if (yytype < YYNTOKENS)
++ {
++ YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
++# ifdef YYPRINT
++ YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
++# endif
++ }
++ else
++ YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
+
+- while (i-- > 0)
+- *t++ = *f++;
++ switch (yytype)
++ {
++ default:
++ break;
++ }
++ YYFPRINTF (yyoutput, ")");
+ }
+
++#endif /* ! YYDEBUG */
++/*-----------------------------------------------.
++| Release the memory associated to this symbol. |
++`-----------------------------------------------*/
++
++#if defined (__STDC__) || defined (__cplusplus)
++static void
++yydestruct (int yytype, YYSTYPE *yyvaluep)
++#else
++static void
++yydestruct (yytype, yyvaluep)
++ int yytype;
++ YYSTYPE *yyvaluep;
+ #endif
+-#endif
++{
++ /* Pacify ``unused variable'' warnings. */
++ (void) yyvaluep;
++
++ switch (yytype)
++ {
++
++ default:
++ break;
++ }
++}
+ \f
+-#line 217 "/usr/lib/bison.simple"
+
+-/* The user can define YYPARSE_PARAM as the name of an argument to be passed
+- into yyparse. The argument should have type void *.
+- It should actually point to an object.
+- Grammar actions can access the variable by casting it
+- to the proper pointer type. */
++/* Prevent warnings from -Wmissing-prototypes. */
+
+ #ifdef YYPARSE_PARAM
+-#ifdef __cplusplus
+-#define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
+-#define YYPARSE_PARAM_DECL
+-#else /* not __cplusplus */
+-#define YYPARSE_PARAM_ARG YYPARSE_PARAM
+-#define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
+-#endif /* not __cplusplus */
+-#else /* not YYPARSE_PARAM */
+-#define YYPARSE_PARAM_ARG
+-#define YYPARSE_PARAM_DECL
+-#endif /* not YYPARSE_PARAM */
++# if defined (__STDC__) || defined (__cplusplus)
++int yyparse (void *YYPARSE_PARAM);
++# else
++int yyparse ();
++# endif
++#else /* ! YYPARSE_PARAM */
++#if defined (__STDC__) || defined (__cplusplus)
++int yyparse (void);
++#else
++int yyparse ();
++#endif
++#endif /* ! YYPARSE_PARAM */
++
++
++
++/* The lookahead symbol. */
++int yychar;
++
++/* The semantic value of the lookahead symbol. */
++YYSTYPE yylval;
++
++/* Number of syntax errors so far. */
++int yynerrs;
++
++
++
++/*----------.
++| yyparse. |
++`----------*/
+
+-/* Prevent warning if -Wstrict-prototypes. */
+-#ifdef __GNUC__
+ #ifdef YYPARSE_PARAM
+-int yyparse (void *);
++# if defined (__STDC__) || defined (__cplusplus)
++int yyparse (void *YYPARSE_PARAM)
++# else
++int yyparse (YYPARSE_PARAM)
++ void *YYPARSE_PARAM;
++# endif
++#else /* ! YYPARSE_PARAM */
++#if defined (__STDC__) || defined (__cplusplus)
++int
++yyparse (void)
+ #else
+-int yyparse (void);
++int
++yyparse ()
++
+ #endif
+ #endif
+-
+-int
+-yyparse(YYPARSE_PARAM_ARG)
+- YYPARSE_PARAM_DECL
+ {
++
+ register int yystate;
+ register int yyn;
+- register short *yyssp;
++ int yyresult;
++ /* Number of tokens to shift before error messages enabled. */
++ int yyerrstatus;
++ /* Lookahead token as an internal (translated) token number. */
++ int yytoken = 0;
++
++ /* Three stacks and their tools:
++ `yyss': related to states,
++ `yyvs': related to semantic values,
++ `yyls': related to locations.
++
++ Refer to the stacks thru separate pointers, to allow yyoverflow
++ to reallocate them elsewhere. */
++
++ /* The state stack. */
++ short int yyssa[YYINITDEPTH];
++ short int *yyss = yyssa;
++ register short int *yyssp;
++
++ /* The semantic value stack. */
++ YYSTYPE yyvsa[YYINITDEPTH];
++ YYSTYPE *yyvs = yyvsa;
+ register YYSTYPE *yyvsp;
+- int yyerrstatus; /* number of tokens to shift before error messages enabled */
+- int yychar1 = 0; /* lookahead token as an internal (translated) token number */
+
+- short yyssa[YYINITDEPTH]; /* the state stack */
+- YYSTYPE yyvsa[YYINITDEPTH]; /* the semantic value stack */
+
+- short *yyss = yyssa; /* refer to the stacks thru separate pointers */
+- YYSTYPE *yyvs = yyvsa; /* to allow yyoverflow to reallocate them elsewhere */
+
+-#ifdef YYLSP_NEEDED
+- YYLTYPE yylsa[YYINITDEPTH]; /* the location stack */
+- YYLTYPE *yyls = yylsa;
+- YYLTYPE *yylsp;
+-
+-#define YYPOPSTACK (yyvsp--, yyssp--, yylsp--)
+-#else
+ #define YYPOPSTACK (yyvsp--, yyssp--)
+-#endif
+
+- int yystacksize = YYINITDEPTH;
+- int yyfree_stacks = 0;
++ YYSIZE_T yystacksize = YYINITDEPTH;
+
+-#ifdef YYPURE
+- int yychar;
+- YYSTYPE yylval;
+- int yynerrs;
+-#ifdef YYLSP_NEEDED
+- YYLTYPE yylloc;
+-#endif
+-#endif
++ /* The variables used to return semantic value and location from the
++ action routines. */
++ YYSTYPE yyval;
+
+- YYSTYPE yyval; /* the variable used to return */
+- /* semantic values from the action */
+- /* routines */
+
++ /* When reducing, the number of symbols on the RHS of the reduced
++ rule. */
+ int yylen;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Starting parse\n");
+-#endif
++ YYDPRINTF ((stderr, "Starting parse\n"));
+
+ yystate = 0;
+ yyerrstatus = 0;
+@@ -639,110 +1015,97 @@
+ so that they stay on the same level as the state stack.
+ The wasted elements are never initialized. */
+
+- yyssp = yyss - 1;
++ yyssp = yyss;
+ yyvsp = yyvs;
+-#ifdef YYLSP_NEEDED
+- yylsp = yyls;
+-#endif
+
+-/* Push a new state, which is found in yystate . */
+-/* In all cases, when you get here, the value and location stacks
+- have just been pushed. so pushing a state here evens the stacks. */
+-yynewstate:
+
+- *++yyssp = yystate;
++ goto yysetstate;
+
+- if (yyssp >= yyss + yystacksize - 1)
+- {
+- /* Give user a chance to reallocate the stack */
+- /* Use copies of these so that the &'s don't force the real ones into memory. */
+- YYSTYPE *yyvs1 = yyvs;
+- short *yyss1 = yyss;
+-#ifdef YYLSP_NEEDED
+- YYLTYPE *yyls1 = yyls;
+-#endif
++/*------------------------------------------------------------.
++| yynewstate -- Push a new state, which is found in yystate. |
++`------------------------------------------------------------*/
++ yynewstate:
++ /* In all cases, when you get here, the value and location stacks
++ have just been pushed. so pushing a state here evens the stacks.
++ */
++ yyssp++;
+
++ yysetstate:
++ *yyssp = yystate;
++
++ if (yyss + yystacksize - 1 <= yyssp)
++ {
+ /* Get the current used size of the three stacks, in elements. */
+- int size = yyssp - yyss + 1;
++ YYSIZE_T yysize = yyssp - yyss + 1;
+
+ #ifdef yyoverflow
+- /* Each stack pointer address is followed by the size of
+- the data in use in that stack, in bytes. */
+-#ifdef YYLSP_NEEDED
+- /* This used to be a conditional around just the two extra args,
+- but that might be undefined if yyoverflow is a macro. */
+- yyoverflow("parser stack overflow",
+- &yyss1, size * sizeof (*yyssp),
+- &yyvs1, size * sizeof (*yyvsp),
+- &yyls1, size * sizeof (*yylsp),
+- &yystacksize);
+-#else
+- yyoverflow("parser stack overflow",
+- &yyss1, size * sizeof (*yyssp),
+- &yyvs1, size * sizeof (*yyvsp),
+- &yystacksize);
+-#endif
+-
+- yyss = yyss1; yyvs = yyvs1;
+-#ifdef YYLSP_NEEDED
+- yyls = yyls1;
+-#endif
++ {
++ /* Give user a chance to reallocate the stack. Use copies of
++ these so that the &'s don't force the real ones into
++ memory. */
++ YYSTYPE *yyvs1 = yyvs;
++ short int *yyss1 = yyss;
++
++
++ /* Each stack pointer address is followed by the size of the
++ data in use in that stack, in bytes. This used to be a
++ conditional around just the two extra args, but that might
++ be undefined if yyoverflow is a macro. */
++ yyoverflow ("parser stack overflow",
++ &yyss1, yysize * sizeof (*yyssp),
++ &yyvs1, yysize * sizeof (*yyvsp),
++
++ &yystacksize);
++
++ yyss = yyss1;
++ yyvs = yyvs1;
++ }
+ #else /* no yyoverflow */
++# ifndef YYSTACK_RELOCATE
++ goto yyoverflowlab;
++# else
+ /* Extend the stack our own way. */
+- if (yystacksize >= YYMAXDEPTH)
+- {
+- yyerror("parser stack overflow");
+- if (yyfree_stacks)
+- {
+- free (yyss);
+- free (yyvs);
+-#ifdef YYLSP_NEEDED
+- free (yyls);
+-#endif
+- }
+- return 2;
+- }
++ if (YYMAXDEPTH <= yystacksize)
++ goto yyoverflowlab;
+ yystacksize *= 2;
+- if (yystacksize > YYMAXDEPTH)
++ if (YYMAXDEPTH < yystacksize)
+ yystacksize = YYMAXDEPTH;
+-#ifndef YYSTACK_USE_ALLOCA
+- yyfree_stacks = 1;
+-#endif
+- yyss = (short *) YYSTACK_ALLOC (yystacksize * sizeof (*yyssp));
+- __yy_memcpy ((char *)yyss, (char *)yyss1,
+- size * (unsigned int) sizeof (*yyssp));
+- yyvs = (YYSTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yyvsp));
+- __yy_memcpy ((char *)yyvs, (char *)yyvs1,
+- size * (unsigned int) sizeof (*yyvsp));
+-#ifdef YYLSP_NEEDED
+- yyls = (YYLTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yylsp));
+- __yy_memcpy ((char *)yyls, (char *)yyls1,
+- size * (unsigned int) sizeof (*yylsp));
+-#endif
++
++ {
++ short int *yyss1 = yyss;
++ union yyalloc *yyptr =
++ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
++ if (! yyptr)
++ goto yyoverflowlab;
++ YYSTACK_RELOCATE (yyss);
++ YYSTACK_RELOCATE (yyvs);
++
++# undef YYSTACK_RELOCATE
++ if (yyss1 != yyssa)
++ YYSTACK_FREE (yyss1);
++ }
++# endif
+ #endif /* no yyoverflow */
+
+- yyssp = yyss + size - 1;
+- yyvsp = yyvs + size - 1;
+-#ifdef YYLSP_NEEDED
+- yylsp = yyls + size - 1;
+-#endif
++ yyssp = yyss + yysize - 1;
++ yyvsp = yyvs + yysize - 1;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Stack size increased to %d\n", yystacksize);
+-#endif
+
+- if (yyssp >= yyss + yystacksize - 1)
++ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
++ (unsigned long int) yystacksize));
++
++ if (yyss + yystacksize - 1 <= yyssp)
+ YYABORT;
+ }
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Entering state %d\n", yystate);
+-#endif
++ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+
+ goto yybackup;
+- yybackup:
++
++/*-----------.
++| yybackup. |
++`-----------*/
++yybackup:
+
+ /* Do appropriate processing given the current state. */
+ /* Read a lookahead token if we need one and don't already have one. */
+@@ -751,154 +1114,120 @@
+ /* First try to decide what to do without reference to lookahead token. */
+
+ yyn = yypact[yystate];
+- if (yyn == YYFLAG)
++ if (yyn == YYPACT_NINF)
+ goto yydefault;
+
+ /* Not known => get a lookahead token if don't already have one. */
+
+- /* yychar is either YYEMPTY or YYEOF
+- or a valid token in external form. */
+-
++ /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
+ if (yychar == YYEMPTY)
+ {
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Reading a token: ");
+-#endif
++ YYDPRINTF ((stderr, "Reading a token: "));
+ yychar = YYLEX;
+ }
+
+- /* Convert token to internal form (in yychar1) for indexing tables with */
+-
+- if (yychar <= 0) /* This means end of input. */
++ if (yychar <= YYEOF)
+ {
+- yychar1 = 0;
+- yychar = YYEOF; /* Don't call YYLEX any more */
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Now at end of input.\n");
+-#endif
++ yychar = yytoken = YYEOF;
++ YYDPRINTF ((stderr, "Now at end of input.\n"));
+ }
+ else
+ {
+- yychar1 = YYTRANSLATE(yychar);
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- fprintf (stderr, "Next token is %d (%s", yychar, yytname[yychar1]);
+- /* Give the individual parser a way to print the precise meaning
+- of a token, for further debugging info. */
+-#ifdef YYPRINT
+- YYPRINT (stderr, yychar, yylval);
+-#endif
+- fprintf (stderr, ")\n");
+- }
+-#endif
++ yytoken = YYTRANSLATE (yychar);
++ YYDSYMPRINTF ("Next token is", yytoken, &yylval, &yylloc);
+ }
+
+- yyn += yychar1;
+- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
++ /* If the proper action on seeing token YYTOKEN is to reduce or to
++ detect an error, take that action. */
++ yyn += yytoken;
++ if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
+ goto yydefault;
+-
+ yyn = yytable[yyn];
+-
+- /* yyn is what to do for this token type in this state.
+- Negative => reduce, -yyn is rule number.
+- Positive => shift, yyn is new state.
+- New state is final state => don't bother to shift,
+- just return success.
+- 0, or most negative number => error. */
+-
+- if (yyn < 0)
++ if (yyn <= 0)
+ {
+- if (yyn == YYFLAG)
++ if (yyn == 0 || yyn == YYTABLE_NINF)
+ goto yyerrlab;
+ yyn = -yyn;
+ goto yyreduce;
+ }
+- else if (yyn == 0)
+- goto yyerrlab;
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ /* Shift the lookahead token. */
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]);
+-#endif
++ YYDPRINTF ((stderr, "Shifting token %s, ", yytname[yytoken]));
+
+ /* Discard the token being shifted unless it is eof. */
+ if (yychar != YYEOF)
+ yychar = YYEMPTY;
+
+ *++yyvsp = yylval;
+-#ifdef YYLSP_NEEDED
+- *++yylsp = yylloc;
+-#endif
+
+- /* count tokens shifted since error; after three, turn off error status. */
+- if (yyerrstatus) yyerrstatus--;
++
++ /* Count tokens shifted since error; after three, turn off error
++ status. */
++ if (yyerrstatus)
++ yyerrstatus--;
+
+ yystate = yyn;
+ goto yynewstate;
+
+-/* Do the default action for the current state. */
+-yydefault:
+
++/*-----------------------------------------------------------.
++| yydefault -- do the default action for the current state. |
++`-----------------------------------------------------------*/
++yydefault:
+ yyn = yydefact[yystate];
+ if (yyn == 0)
+ goto yyerrlab;
++ goto yyreduce;
+
+-/* Do a reduction. yyn is the number of a rule to reduce with. */
++
++/*-----------------------------.
++| yyreduce -- Do a reduction. |
++`-----------------------------*/
+ yyreduce:
++ /* yyn is the number of a rule to reduce with. */
+ yylen = yyr2[yyn];
+- if (yylen > 0)
+- yyval = yyvsp[1-yylen]; /* implement default value of the action */
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- int i;
++ /* If YYLEN is nonzero, implement the default value of the action:
++ `$$ = $1'.
+
+- fprintf (stderr, "Reducing via rule %d (line %d), ",
+- yyn, yyrline[yyn]);
++ Otherwise, the following line sets YYVAL to garbage.
++ This behavior is undocumented and Bison
++ users should not rely upon it. Assigning to YYVAL
++ unconditionally makes the parser a bit smaller, and it avoids a
++ GCC warning that YYVAL may be used uninitialized. */
++ yyval = yyvsp[1-yylen];
+
+- /* Print the symbols being reduced, and their result. */
+- for (i = yyprhs[yyn]; yyrhs[i] > 0; i++)
+- fprintf (stderr, "%s ", yytname[yyrhs[i]]);
+- fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]);
+- }
+-#endif
+
+-
+- switch (yyn) {
+-
+-case 1:
+-#line 165 "ql_y.y"
+-{
++ YY_REDUCE_PRINT (yyn);
++ switch (yyn)
++ {
++ case 2:
++#line 168 "ql_y.y"
++ {
+ STRUCTURE *walk;
+
+ def = yyvsp[0].field;
+ for (walk = structures; walk; walk = walk->next)
+ if (!walk->instances)
+ fprintf(stderr,"unused structure: %s\n",walk->id);
+- ;
+- break;}
+-case 3:
+-#line 177 "ql_y.y"
+-{
++ }
++ break;
++
++ case 4:
++#line 180 "ql_y.y"
++ {
+ to_c("#%s\n",yyvsp[-1].str);
+ to_test("#%s\n",yyvsp[-1].str);
+ if (dump) to_dump("#%s\n",yyvsp[-1].str);
+- ;
+- break;}
+-case 6:
+-#line 190 "ql_y.y"
+-{
++ }
++ break;
++
++ case 7:
++#line 193 "ql_y.y"
++ {
+ STRUCTURE *n;
+
+ n = alloc_t(STRUCTURE);
+@@ -907,23 +1236,26 @@
+ n->instances = 0;
+ n->next = structures;
+ structures = n;
+- ;
+- break;}
+-case 7:
+-#line 203 "ql_y.y"
+-{
++ }
++ break;
++
++ case 8:
++#line 206 "ql_y.y"
++ {
+ abort_id = NULL;
+- ;
+- break;}
+-case 8:
+-#line 207 "ql_y.y"
+-{
++ }
++ break;
++
++ case 9:
++#line 210 "ql_y.y"
++ {
+ yyval.field = yyvsp[0].field;
+- ;
+- break;}
+-case 9:
+-#line 214 "ql_y.y"
+-{
++ }
++ break;
++
++ case 10:
++#line 217 "ql_y.y"
++ {
+ STRUCTURE *walk;
+
+ for (walk = structures; walk; walk = walk->next)
+@@ -939,38 +1271,43 @@
+ yyval.field->my_block = copy_block(walk->block);
+ yyval.field->next = NULL;
+ abort_id = NULL;
+- ;
+- break;}
+-case 10:
+-#line 232 "ql_y.y"
+-{
++ }
++ break;
++
++ case 11:
++#line 235 "ql_y.y"
++ {
+ yyval.field = yyvsp[-1].field;
+ abort_id = NULL;
+- ;
+- break;}
+-case 11:
+-#line 237 "ql_y.y"
+-{
++ }
++ break;
++
++ case 12:
++#line 240 "ql_y.y"
++ {
+ yyval.field = NULL;
+ abort_id = yyvsp[0].str;
+- ;
+- break;}
+-case 12:
+-#line 244 "ql_y.y"
+-{
++ }
++ break;
++
++ case 13:
++#line 247 "ql_y.y"
++ {
+ yyval.field = NULL;
+- ;
+- break;}
+-case 13:
+-#line 248 "ql_y.y"
+-{
++ }
++ break;
++
++ case 14:
++#line 251 "ql_y.y"
++ {
+ yyval.field = yyvsp[-1].field;
+ yyvsp[-1].field->next = yyvsp[0].field;
+- ;
+- break;}
+-case 14:
+-#line 256 "ql_y.y"
+-{
++ }
++ break;
++
++ case 15:
++#line 259 "ql_y.y"
++ {
+ TAG *walk;
+
+ yyval.field = yyvsp[0].field;
+@@ -989,23 +1326,26 @@
+ "selections");
+ if (*yyval.field->id != '_' && yyval.field->value && yyval.field->value->type == vt_multi)
+ yyerror("multi selectors must be unnamed");
+- ;
+- break;}
+-case 15:
+-#line 279 "ql_y.y"
+-{
++ }
++ break;
++
++ case 16:
++#line 282 "ql_y.y"
++ {
+ yyval.num = 0;
+- ;
+- break;}
+-case 16:
+-#line 283 "ql_y.y"
+-{
++ }
++ break;
++
++ case 17:
++#line 286 "ql_y.y"
++ {
+ yyval.num = 1;
+- ;
+- break;}
+-case 17:
+-#line 290 "ql_y.y"
+-{
++ }
++ break;
++
++ case 18:
++#line 293 "ql_y.y"
++ {
+ yyval.field = alloc_t(FIELD);
+ yyval.field->size = yyvsp[-1].num;
+ yyval.field->var_len = -2; /* hack */
+@@ -1015,140 +1355,159 @@
+ yyval.field->value = NULL;
+ yyval.field->structure = NULL;
+ yyval.field->next = NULL;
+- ;
+- break;}
+-case 18:
+-#line 302 "ql_y.y"
+-{
++ }
++ break;
++
++ case 19:
++#line 305 "ql_y.y"
++ {
+ yyval.field = alloc_t(FIELD);
+ yyval.field->size = yyvsp[-4].num;
+ yyval.field->var_len = -1;
+ yyval.field->pos = yyvsp[-3].num;
+ yyval.field->flush = !yyvsp[-2].num;
+- if (yyval.field->pos == -1)
++ if (yyval.field->pos == -1) {
+ if (yyval.field->size & 7)
+ yyerror("position required for small fields");
+ else yyval.field->pos = 0;
++ }
+ yyval.field->value = yyvsp[0].value;
+ yyval.field->structure = NULL;
+ yyval.field->next = NULL;
+- ;
+- break;}
+-case 19:
+-#line 319 "ql_y.y"
+-{
+- yyval.num = -1;
+- ;
+- break;}
+-case 20:
++ }
++ break;
++
++ case 20:
+ #line 323 "ql_y.y"
+-{
++ {
++ yyval.num = -1;
++ }
++ break;
++
++ case 21:
++#line 327 "ql_y.y"
++ {
+ yyval.num = yyvsp[0].num-1;
+ if (yyval.num < 0 || yyval.num > 7) yyerror("invalid position");
+- ;
+- break;}
+-case 21:
+-#line 331 "ql_y.y"
+-{
++ }
++ break;
++
++ case 22:
++#line 335 "ql_y.y"
++ {
+ char *end;
+
+ yyval.num = strtoul(yyvsp[0].str,&end,10);
+ if (*end) yyerror("no a decimal number");
+- ;
+- break;}
+-case 22:
+-#line 340 "ql_y.y"
+-{
+- yyval.num = 0;
+- ;
+- break;}
+-case 23:
++ }
++ break;
++
++ case 23:
+ #line 344 "ql_y.y"
+-{
++ {
++ yyval.num = 0;
++ }
++ break;
++
++ case 24:
++#line 348 "ql_y.y"
++ {
+ if (strcmp(yyvsp[0].str,"more")) yyerror("\"more\" expected");
+ yyval.num = 1;
+- ;
+- break;}
+-case 24:
+-#line 351 "ql_y.y"
+-{
+- yyval.value = NULL;
+- ;
+- break;}
+-case 25:
++ }
++ break;
++
++ case 25:
+ #line 355 "ql_y.y"
+-{
++ {
++ yyval.value = NULL;
++ }
++ break;
++
++ case 26:
++#line 359 "ql_y.y"
++ {
+ yyval.value = yyvsp[0].value;
+- ;
+- break;}
+-case 26:
+-#line 362 "ql_y.y"
+-{
++ }
++ break;
++
++ case 27:
++#line 366 "ql_y.y"
++ {
+ yyval.value = alloc_t(VALUE);
+ yyval.value->type = vt_id;
+ yyval.value->id = yyvsp[0].str;
+- ;
+- break;}
+-case 27:
+-#line 368 "ql_y.y"
+-{
++ }
++ break;
++
++ case 28:
++#line 372 "ql_y.y"
++ {
+ yyval.value = alloc_t(VALUE);
+ yyval.value->type = vt_case;
+ yyval.value->id = NULL;
+ yyval.value->tags = yyvsp[-1].tag;
+- ;
+- break;}
+-case 28:
+-#line 375 "ql_y.y"
+-{
++ }
++ break;
++
++ case 29:
++#line 379 "ql_y.y"
++ {
+ yyval.value = alloc_t(VALUE);
+ yyval.value->type = vt_multi;
+ yyval.value->tags = yyvsp[-1].tag;
+- ;
+- break;}
+-case 29:
+-#line 381 "ql_y.y"
+-{
++ }
++ break;
++
++ case 30:
++#line 385 "ql_y.y"
++ {
+ yyval.value = alloc_t(VALUE);
+ yyval.value->type = vt_length;
+ yyval.value->recovery = yyvsp[-2].str;
+ yyval.value->block = yyvsp[0].field;
+ yyval.value->abort_id = abort_id;
+- ;
+- break;}
+-case 30:
+-#line 391 "ql_y.y"
+-{
+- yyval.str = NULL;
+- ;
+- break;}
+-case 31:
++ }
++ break;
++
++ case 31:
+ #line 395 "ql_y.y"
+-{
++ {
++ yyval.str = NULL;
++ }
++ break;
++
++ case 32:
++#line 399 "ql_y.y"
++ {
+ yyval.str = yyvsp[0].str;
+- ;
+- break;}
+-case 32:
+-#line 401 "ql_y.y"
+-{
+- yyval.nlist = NULL;
+- ;
+- break;}
+-case 33:
++ }
++ break;
++
++ case 33:
+ #line 405 "ql_y.y"
+-{
++ {
++ yyval.nlist = NULL;
++ }
++ break;
++
++ case 34:
++#line 409 "ql_y.y"
++ {
+ yyval.nlist = get_name_list(yyvsp[0].str);
+- ;
+- break;}
+-case 34:
+-#line 411 "ql_y.y"
+-{
+- yyval.tag = NULL;
+- ;
+- break;}
+-case 35:
++ }
++ break;
++
++ case 35:
+ #line 415 "ql_y.y"
+-{
++ {
++ yyval.tag = NULL;
++ }
++ break;
++
++ case 36:
++#line 419 "ql_y.y"
++ {
+ yyval.tag = alloc_t(TAG);
+ yyval.tag->deflt = 1;
+ if (yyvsp[-2].str) {
+@@ -1163,18 +1522,20 @@
+ yyval.tag->block = yyvsp[0].field;
+ yyval.tag->next = NULL;
+ yyval.tag->abort_id = abort_id;
+- ;
+- break;}
+-case 36:
+-#line 432 "ql_y.y"
+-{
++ }
++ break;
++
++ case 37:
++#line 436 "ql_y.y"
++ {
+ yyval.tag = alloc_t(TAG);
+ yyval.tag->abort_id = abort_id;
+- ;
+- break;}
+-case 37:
+-#line 437 "ql_y.y"
+-{
++ }
++ break;
++
++ case 38:
++#line 441 "ql_y.y"
++ {
+ yyval.tag = yyvsp[-1].tag;
+ yyval.tag->deflt = 0;
+ if (yyvsp[-4].str) {
+@@ -1188,17 +1549,19 @@
+ yyval.tag->more = yyvsp[-3].list;
+ yyval.tag->block = yyvsp[-2].field;
+ yyval.tag->next = yyvsp[0].tag;
+- ;
+- break;}
+-case 38:
+-#line 455 "ql_y.y"
+-{
+- yyval.tag = NULL;
+- ;
+- break;}
+-case 39:
++ }
++ break;
++
++ case 39:
+ #line 459 "ql_y.y"
+-{
++ {
++ yyval.tag = NULL;
++ }
++ break;
++
++ case 40:
++#line 463 "ql_y.y"
++ {
+ yyval.tag = alloc_t(TAG);
+ yyval.tag->deflt = 1;
+ if (yyvsp[-2].str) {
+@@ -1212,18 +1575,20 @@
+ yyval.tag->more = yyvsp[-1].list;
+ yyval.tag->block = yyvsp[0].field;
+ yyval.tag->next = NULL;
+- ;
+- break;}
+-case 40:
+-#line 475 "ql_y.y"
+-{
++ }
++ break;
++
++ case 41:
++#line 479 "ql_y.y"
++ {
+ yyval.tag = alloc_t(TAG);
+ yyval.tag->abort_id = abort_id;
+- ;
+- break;}
+-case 41:
+-#line 480 "ql_y.y"
+-{
++ }
++ break;
++
++ case 42:
++#line 484 "ql_y.y"
++ {
+ yyval.tag = yyvsp[-1].tag;
+ yyval.tag->deflt = 0;
+ if (yyvsp[-4].str) {
+@@ -1237,254 +1602,266 @@
+ yyval.tag->more = yyvsp[-3].list;
+ yyval.tag->block = yyvsp[-2].field;
+ yyval.tag->next = yyvsp[0].tag;
+- ;
+- break;}
+-case 42:
+-#line 498 "ql_y.y"
+-{
+- yyval.str = NULL;
+- ;
+- break;}
+-case 43:
++ }
++ break;
++
++ case 43:
+ #line 502 "ql_y.y"
+-{
++ {
++ yyval.str = NULL;
++ }
++ break;
++
++ case 44:
++#line 506 "ql_y.y"
++ {
+ yyval.str = yyvsp[0].str;
+- ;
+- break;}
+-case 44:
+-#line 508 "ql_y.y"
+-{
+- yyval.list = NULL;
+- ;
+- break;}
+-case 45:
++ }
++ break;
++
++ case 45:
+ #line 512 "ql_y.y"
+-{
++ {
++ yyval.list = NULL;
++ }
++ break;
++
++ case 46:
++#line 516 "ql_y.y"
++ {
+ yyval.list = alloc_t(VALUE_LIST);
+ yyval.list->value = yyvsp[-1].str;
+ yyval.list->next = yyvsp[0].list;
+- ;
+- break;}
+-}
+- /* the action file gets copied in in place of this dollarsign */
+-#line 543 "/usr/lib/bison.simple"
++ }
++ break;
++
++
++ }
++
++/* Line 1010 of yacc.c. */
++#line 1643 "y.tab.c"
+ \f
+ yyvsp -= yylen;
+ yyssp -= yylen;
+-#ifdef YYLSP_NEEDED
+- yylsp -= yylen;
+-#endif
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- short *ssp1 = yyss - 1;
+- fprintf (stderr, "state stack now");
+- while (ssp1 != yyssp)
+- fprintf (stderr, " %d", *++ssp1);
+- fprintf (stderr, "\n");
+- }
+-#endif
++
++ YY_STACK_PRINT (yyss, yyssp);
+
+ *++yyvsp = yyval;
+
+-#ifdef YYLSP_NEEDED
+- yylsp++;
+- if (yylen == 0)
+- {
+- yylsp->first_line = yylloc.first_line;
+- yylsp->first_column = yylloc.first_column;
+- yylsp->last_line = (yylsp-1)->last_line;
+- yylsp->last_column = (yylsp-1)->last_column;
+- yylsp->text = 0;
+- }
+- else
+- {
+- yylsp->last_line = (yylsp+yylen-1)->last_line;
+- yylsp->last_column = (yylsp+yylen-1)->last_column;
+- }
+-#endif
+
+- /* Now "shift" the result of the reduction.
+- Determine what state that goes to,
+- based on the state we popped back to
+- and the rule number reduced by. */
++ /* Now `shift' the result of the reduction. Determine what state
++ that goes to, based on the state we popped back to and the rule
++ number reduced by. */
+
+ yyn = yyr1[yyn];
+
+- yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
+- if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
++ yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
++ if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
+ yystate = yytable[yystate];
+ else
+- yystate = yydefgoto[yyn - YYNTBASE];
++ yystate = yydefgoto[yyn - YYNTOKENS];
+
+ goto yynewstate;
+
+-yyerrlab: /* here on detecting error */
+
+- if (! yyerrstatus)
+- /* If not already recovering from an error, report this error. */
++/*------------------------------------.
++| yyerrlab -- here on detecting error |
++`------------------------------------*/
++yyerrlab:
++ /* If not already recovering from an error, report this error. */
++ if (!yyerrstatus)
+ {
+ ++yynerrs;
+-
+-#ifdef YYERROR_VERBOSE
++#if YYERROR_VERBOSE
+ yyn = yypact[yystate];
+
+- if (yyn > YYFLAG && yyn < YYLAST)
++ if (YYPACT_NINF < yyn && yyn < YYLAST)
+ {
+- int size = 0;
+- char *msg;
+- int x, count;
+-
+- count = 0;
+- /* Start X at -yyn if nec to avoid negative indexes in yycheck. */
+- for (x = (yyn < 0 ? -yyn : 0);
+- x < (sizeof(yytname) / sizeof(char *)); x++)
+- if (yycheck[x + yyn] == x)
+- size += strlen(yytname[x]) + 15, count++;
+- msg = (char *) malloc(size + 15);
+- if (msg != 0)
++ YYSIZE_T yysize = 0;
++ int yytype = YYTRANSLATE (yychar);
++ const char* yyprefix;
++ char *yymsg;
++ int yyx;
++
++ /* Start YYX at -YYN if negative to avoid negative indexes in
++ YYCHECK. */
++ int yyxbegin = yyn < 0 ? -yyn : 0;
++
++ /* Stay within bounds of both yycheck and yytname. */
++ int yychecklim = YYLAST - yyn;
++ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
++ int yycount = 0;
++
++ yyprefix = ", expecting ";
++ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
++ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
++ {
++ yysize += yystrlen (yyprefix) + yystrlen (yytname [yyx]);
++ yycount += 1;
++ if (yycount == 5)
++ {
++ yysize = 0;
++ break;
++ }
++ }
++ yysize += (sizeof ("syntax error, unexpected ")
++ + yystrlen (yytname[yytype]));
++ yymsg = (char *) YYSTACK_ALLOC (yysize);
++ if (yymsg != 0)
+ {
+- strcpy(msg, "parse error");
++ char *yyp = yystpcpy (yymsg, "syntax error, unexpected ");
++ yyp = yystpcpy (yyp, yytname[yytype]);
+
+- if (count < 5)
++ if (yycount < 5)
+ {
+- count = 0;
+- for (x = (yyn < 0 ? -yyn : 0);
+- x < (sizeof(yytname) / sizeof(char *)); x++)
+- if (yycheck[x + yyn] == x)
++ yyprefix = ", expecting ";
++ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
++ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
+ {
+- strcat(msg, count == 0 ? ", expecting `" : " or `");
+- strcat(msg, yytname[x]);
+- strcat(msg, "'");
+- count++;
++ yyp = yystpcpy (yyp, yyprefix);
++ yyp = yystpcpy (yyp, yytname[yyx]);
++ yyprefix = " or ";
+ }
+ }
+- yyerror(msg);
+- free(msg);
++ yyerror (yymsg);
++ YYSTACK_FREE (yymsg);
+ }
+ else
+- yyerror ("parse error; also virtual memory exceeded");
++ yyerror ("syntax error; also virtual memory exhausted");
+ }
+ else
+ #endif /* YYERROR_VERBOSE */
+- yyerror("parse error");
++ yyerror ("syntax error");
+ }
+
+- goto yyerrlab1;
+-yyerrlab1: /* here on error raised explicitly by an action */
++
+
+ if (yyerrstatus == 3)
+ {
+- /* if just tried and failed to reuse lookahead token after an error, discard it. */
++ /* If just tried and failed to reuse lookahead token after an
++ error, discard it. */
+
+- /* return failure if at end of input */
+- if (yychar == YYEOF)
+- YYABORT;
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]);
+-#endif
++ if (yychar <= YYEOF)
++ {
++ /* If at end of input, pop the error token,
++ then the rest of the stack, then return failure. */
++ if (yychar == YYEOF)
++ for (;;)
++ {
++ YYPOPSTACK;
++ if (yyssp == yyss)
++ YYABORT;
++ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
++ yydestruct (yystos[*yyssp], yyvsp);
++ }
++ }
++ else
++ {
++ YYDSYMPRINTF ("Error: discarding", yytoken, &yylval, &yylloc);
++ yydestruct (yytoken, &yylval);
++ yychar = YYEMPTY;
+
+- yychar = YYEMPTY;
++ }
+ }
+
+- /* Else will try to reuse lookahead token
+- after shifting the error token. */
+-
+- yyerrstatus = 3; /* Each real token shifted decrements this */
++ /* Else will try to reuse lookahead token after shifting the error
++ token. */
++ goto yyerrlab1;
+
+- goto yyerrhandle;
+
+-yyerrdefault: /* current state does not do anything special for the error token. */
++/*---------------------------------------------------.
++| yyerrorlab -- error raised explicitly by YYERROR. |
++`---------------------------------------------------*/
++yyerrorlab:
+
+-#if 0
+- /* This is wrong; only states that explicitly want error tokens
+- should shift them. */
+- yyn = yydefact[yystate]; /* If its default is to accept any token, ok. Otherwise pop it.*/
+- if (yyn) goto yydefault;
++#ifdef __GNUC__
++ /* Pacify GCC when the user code never invokes YYERROR and the label
++ yyerrorlab therefore never appears in user code. */
++ if (0)
++ goto yyerrorlab;
+ #endif
+
+-yyerrpop: /* pop the current state because it cannot handle the error token */
+-
+- if (yyssp == yyss) YYABORT;
+- yyvsp--;
+- yystate = *--yyssp;
+-#ifdef YYLSP_NEEDED
+- yylsp--;
+-#endif
++ yyvsp -= yylen;
++ yyssp -= yylen;
++ yystate = *yyssp;
++ goto yyerrlab1;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- short *ssp1 = yyss - 1;
+- fprintf (stderr, "Error: state stack now");
+- while (ssp1 != yyssp)
+- fprintf (stderr, " %d", *++ssp1);
+- fprintf (stderr, "\n");
+- }
+-#endif
+
+-yyerrhandle:
++/*-------------------------------------------------------------.
++| yyerrlab1 -- common code for both syntax error and YYERROR. |
++`-------------------------------------------------------------*/
++yyerrlab1:
++ yyerrstatus = 3; /* Each real token shifted decrements this. */
+
+- yyn = yypact[yystate];
+- if (yyn == YYFLAG)
+- goto yyerrdefault;
++ for (;;)
++ {
++ yyn = yypact[yystate];
++ if (yyn != YYPACT_NINF)
++ {
++ yyn += YYTERROR;
++ if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
++ {
++ yyn = yytable[yyn];
++ if (0 < yyn)
++ break;
++ }
++ }
+
+- yyn += YYTERROR;
+- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
+- goto yyerrdefault;
++ /* Pop the current state because it cannot handle the error token. */
++ if (yyssp == yyss)
++ YYABORT;
+
+- yyn = yytable[yyn];
+- if (yyn < 0)
+- {
+- if (yyn == YYFLAG)
+- goto yyerrpop;
+- yyn = -yyn;
+- goto yyreduce;
++ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
++ yydestruct (yystos[yystate], yyvsp);
++ YYPOPSTACK;
++ yystate = *yyssp;
++ YY_STACK_PRINT (yyss, yyssp);
+ }
+- else if (yyn == 0)
+- goto yyerrpop;
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Shifting error token, ");
+-#endif
++ YYDPRINTF ((stderr, "Shifting error token, "));
+
+ *++yyvsp = yylval;
+-#ifdef YYLSP_NEEDED
+- *++yylsp = yylloc;
+-#endif
++
+
+ yystate = yyn;
+ goto yynewstate;
+
+- yyacceptlab:
+- /* YYACCEPT comes here. */
+- if (yyfree_stacks)
+- {
+- free (yyss);
+- free (yyvs);
+-#ifdef YYLSP_NEEDED
+- free (yyls);
+-#endif
+- }
+- return 0;
+
+- yyabortlab:
+- /* YYABORT comes here. */
+- if (yyfree_stacks)
+- {
+- free (yyss);
+- free (yyvs);
+-#ifdef YYLSP_NEEDED
+- free (yyls);
++/*-------------------------------------.
++| yyacceptlab -- YYACCEPT comes here. |
++`-------------------------------------*/
++yyacceptlab:
++ yyresult = 0;
++ goto yyreturn;
++
++/*-----------------------------------.
++| yyabortlab -- YYABORT comes here. |
++`-----------------------------------*/
++yyabortlab:
++ yyresult = 1;
++ goto yyreturn;
++
++#ifndef yyoverflow
++/*----------------------------------------------.
++| yyoverflowlab -- parser overflow comes here. |
++`----------------------------------------------*/
++yyoverflowlab:
++ yyerror ("parser stack overflow");
++ yyresult = 2;
++ /* Fall through. */
++#endif
++
++yyreturn:
++#ifndef yyoverflow
++ if (yyss != yyssa)
++ YYSTACK_FREE (yyss);
+ #endif
+- }
+- return 1;
++ return yyresult;
+ }
+-#line 518 "ql_y.y"
++
++
++
+--- linux-atm-2.4.1.orig/src/qgen/ql_y.y
++++ linux-atm-2.4.1/src/qgen/ql_y.y
+@@ -17,6 +17,8 @@
+ #include "qgen.h"
+ #include "file.h"
+
++extern void yyerror(const char *s);
++
+
+ #define MAX_TOKEN 256
+ #define DEFAULT_NAMELIST_FILE "default.nl"
+@@ -58,9 +60,10 @@
+ for (walk = strchr(start,0)-1; walk > start && isspace(*walk); walk--)
+ *walk = 0;
+ if (*start == ':') {
+- if (!(searching = strcmp(start+1,name)))
++ if (!(searching = strcmp(start+1,name))) {
+ if (found) yyerror("multiple entries");
+ else found = 1;
++ }
+ continue;
+ }
+ if (searching) continue;
+@@ -305,10 +308,11 @@
+ $$->var_len = -1;
+ $$->pos = $2;
+ $$->flush = !$3;
+- if ($$->pos == -1)
++ if ($$->pos == -1) {
+ if ($$->size & 7)
+ yyerror("position required for small fields");
+ else $$->pos = 0;
++ }
+ $$->value = $5;
+ $$->structure = NULL;
+ $$->next = NULL;
+--- linux-atm-2.4.1.orig/src/qgen/ql_l.l
++++ linux-atm-2.4.1/src/qgen/ql_l.l
+@@ -68,7 +68,7 @@
+
+ %%
+
+-void yyerror(char *s)
++void yyerror(const char *s)
+ {
+ fprintf(stderr,"line %d: %s near \"%s\"\n",lineno,s,yytext);
+ exit(1);
+--- linux-atm-2.4.1.orig/src/qgen/qlib.c
++++ linux-atm-2.4.1/src/qgen/qlib.c
+@@ -26,14 +26,14 @@
+ #include "op.h"
+
+
+-static int debug = 0;
++static int q_debug = 0;
+
+
+ void PREFIX(report)(int severity,const char *msg,...)
+ {
+ va_list ap;
+
+- if (!debug && severity > Q_ERROR) return;
++ if (!q_debug && severity > Q_ERROR) return;
+ va_start(ap,msg);
+ vprintf(msg,ap);
+ printf("\n");
+@@ -836,7 +836,7 @@
+ Q_DSC dsc;
+ int len,c;
+
+- debug = argc != 1;
++ q_debug = argc != 1;
+ len = 0;
+ while (scanf("%x",&c) == 1) msg[len++] = c;
+ qd_start();
+--- linux-atm-2.4.1.orig/src/qgen/qlib.h
++++ linux-atm-2.4.1/src/qgen/qlib.h
+@@ -23,7 +23,9 @@
+ #define Q_FATAL -1
+
+
++#ifndef DUMP_MODE
+ extern int q_dump;
++#endif
+ extern void q_report(int severity,const char *msg,...);
+
+ #ifdef DUMP_MODE
+--- linux-atm-2.4.1.orig/src/qgen/ql_y.h
++++ linux-atm-2.4.1/src/qgen/ql_y.h
+@@ -1,4 +1,65 @@
+-typedef union {
++/* A Bison parser, made by GNU Bison 1.875d. */
++
++/* Skeleton parser for Yacc-like parsing with Bison,
++ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2, or (at your option)
++ any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place - Suite 330,
++ Boston, MA 02111-1307, USA. */
++
++/* As a special exception, when this file is copied by Bison into a
++ Bison output file, you may use that output file without restriction.
++ This special exception was added by the Free Software Foundation
++ in version 1.24 of Bison. */
++
++/* Tokens. */
++#ifndef YYTOKENTYPE
++# define YYTOKENTYPE
++ /* Put the tokens into the symbol table, so that GDB and other debuggers
++ know about them. */
++ enum yytokentype {
++ TOK_BREAK = 258,
++ TOK_CASE = 259,
++ TOK_DEF = 260,
++ TOK_DEFAULT = 261,
++ TOK_LENGTH = 262,
++ TOK_MULTI = 263,
++ TOK_RECOVER = 264,
++ TOK_ABORT = 265,
++ TOK_ID = 266,
++ TOK_INCLUDE = 267,
++ TOK_STRING = 268
++ };
++#endif
++#define TOK_BREAK 258
++#define TOK_CASE 259
++#define TOK_DEF 260
++#define TOK_DEFAULT 261
++#define TOK_LENGTH 262
++#define TOK_MULTI 263
++#define TOK_RECOVER 264
++#define TOK_ABORT 265
++#define TOK_ID 266
++#define TOK_INCLUDE 267
++#define TOK_STRING 268
++
++
++
++
++#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
++#line 142 "ql_y.y"
++typedef union YYSTYPE {
+ const char *str;
+ int num;
+ FIELD *field;
+@@ -7,17 +68,14 @@
+ TAG *tag;
+ NAME_LIST *nlist;
+ } YYSTYPE;
+-#define TOK_BREAK 257
+-#define TOK_CASE 258
+-#define TOK_DEF 259
+-#define TOK_DEFAULT 260
+-#define TOK_LENGTH 261
+-#define TOK_MULTI 262
+-#define TOK_RECOVER 263
+-#define TOK_ABORT 264
+-#define TOK_ID 265
+-#define TOK_INCLUDE 266
+-#define TOK_STRING 267
+-
++/* Line 1285 of yacc.c. */
++#line 73 "y.tab.h"
++# define yystype YYSTYPE /* obsolescent; will be withdrawn */
++# define YYSTYPE_IS_DECLARED 1
++# define YYSTYPE_IS_TRIVIAL 1
++#endif
+
+ extern YYSTYPE yylval;
++
++
++
+--- linux-atm-2.4.1.orig/src/qgen/incl.pl
++++ linux-atm-2.4.1/src/qgen/incl.pl
+@@ -24,7 +24,7 @@
+ }
+ die "no include file specified" unless defined $last;
+ for (@STD,@USR) {
+- next unless defined stat $_."/".$last;
++ next unless -e "$_/$last";
+ print $_."/".$last."\n" || die "print STDOUT: $!";
+ exit 0;
+ }
+--- linux-atm-2.4.1.orig/src/qgen/msg.fmt
++++ linux-atm-2.4.1/src/qgen/msg.fmt
+@@ -53,7 +53,7 @@
+ ATM_TD_FW_PCR_0 { p##fw_pcr_0 <24> } \
+ ATM_TD_BW_PCR_0 { p##bw_pcr_0 <24> } \
+ ATM_TD_FW_PCR_01 { p##fw_pcr_01 <24> } \
+- ATM_TD_BW_PCR_01 { p##bw_pcr_01 <24> } \
++ ATM_TD_BW_PCR_01 { p##bw_pcr_01 <24> }
+
+ #define TRAFFIC_DESCRIPTOR_VBR(p) \
+ ATM_TD_FW_SCR_0 { p##fw_scr_0 <24> } \
+@@ -63,15 +63,15 @@
+ ATM_TD_FW_MBS_0 { p##fw_mbs_0 <24> } \
+ ATM_TD_BW_MBS_0 { p##bw_mbs_0 <24> } \
+ ATM_TD_FW_MBS_01 { p##fw_mbs_01 <24> } \
+- ATM_TD_BW_MBS_01 { p##bw_mbs_01 <24> } \
++ ATM_TD_BW_MBS_01 { p##bw_mbs_01 <24> }
+
+ #define TRAFFIC_DESCRIPTOR_BE(p) \
+- ATM_TD_BEST_EFFORT { p##best_effort <0> } \
++ ATM_TD_BEST_EFFORT { p##best_effort <0> }
+
+ #if defined(UNI40) || defined(DYNAMIC_UNI)
+ #define TRAFFIC_DESCRIPTOR_ABR(p) \
+ ATM_TD_FW_MCR_01 { p##fw_mcr_01 <24> } \
+- ATM_TD_BW_MCR_01 { p##bw_mcr_01 <24> } \
++ ATM_TD_BW_MCR_01 { p##bw_mcr_01 <24> }
+
+ #else
+ #define TRAFFIC_DESCRIPTOR_ABR(p) /* not yet */
+--- linux-atm-2.4.1.orig/src/qgen/output
++++ linux-atm-2.4.1/src/qgen/output
+@@ -0,0 +1,704 @@
++# 1 "<stdin>"
++# 1 "<built-in>"
++# 1 "<command line>"
++# 1 "<stdin>"
++
++
++
++
++
++# 1 "../../config.h" 1
++# 7 "<stdin>" 2
++
++
++
++
++include "atmsap.h"
++include "uni.h"
++# 26 "<stdin>"
++def ie_aal = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ aal_type <8> = case {
++ 5 {
++ _id "atm_aalp" <8> = multi {
++ ATM_AALP_FW_MAX_SDU {
++ fw_max_sdu <16>
++ }
++ ATM_AALP_BW_MAX_SDU {
++ bw_max_sdu <16>
++ }
++
++ ATM_AALP_AAL_MODE {
++ aal_mode <8> # UNI 3.0 only
++ }
++
++ ATM_AALP_SSCS {
++ sscs_type <8>
++ }
++ }
++ }
++ }
++ }
++}
++# 90 "<stdin>"
++def ie_td = { # UNI 3.0 calls this "User Cell Rate"
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _id "atm_td" <8> = multi {
++ ATM_TD_FW_PCR_0 { _dummy <0> = length {}fw_pcr_0 <24> } ATM_TD_BW_PCR_0 { _dummy <0> = length {}bw_pcr_0 <24> } ATM_TD_FW_PCR_01 { _dummy <0> = length {}fw_pcr_01 <24> } ATM_TD_BW_PCR_01 { _dummy <0> = length {}bw_pcr_01 <24> } ATM_TD_FW_SCR_0 { _dummy <0> = length {}fw_scr_0 <24> } ATM_TD_BW_SCR_0 { _dummy <0> = length {}bw_scr_0 <24> } ATM_TD_FW_SCR_01 { _dummy <0> = length {}fw_scr_01 <24> } ATM_TD_BW_SCR_01 { _dummy <0> = length {}bw_scr_01 <24> } ATM_TD_FW_MBS_0 { _dummy <0> = length {}fw_mbs_0 <24> } ATM_TD_BW_MBS_0 { _dummy <0> = length {}bw_mbs_0 <24> } ATM_TD_FW_MBS_01 { _dummy <0> = length {}fw_mbs_01 <24> } ATM_TD_BW_MBS_01 { _dummy <0> = length {}bw_mbs_01 <24> } ATM_TD_BEST_EFFORT { _dummy <0> = length {}best_effort <0> }
++# 104 "<stdin>"
++ ATM_TD_TM_OPT { # @@@ should this also go into the TD macro ?
++
++ fw_fdisc "atm_fd" <1@8,more> = ATM_FD_NO
++ bw_fdisc "atm_fd" <1@7,more> = ATM_FD_NO
++
++ bw_tag "atm_tag" <1@2,more> = ATM_TAG_NO
++ fw_tag "atm_tag" <1@1> = ATM_TAG_NO
++ }
++ }
++ }
++}
++
++
++def ie_bbcap = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ bearer_class "atm_bc" <5@1,more>
++ _ext <1@8> = case {
++ 0 {
++ _ext <1@8,more> = 1
++ trans_cap "atm_tc" <7@1>
++ }
++ default 1 {}
++ }
++ _ext <1@8,more> = 1
++ susc_clip "atm_stc" <2@6,more> = ATM_STC_NO
++ upcc "atm_upcc" <2@1> = ATM_UPCC_P2P
++ }
++}
++
++
++def ie_bhli = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++ hli_type <7@1> = case {
++
++
++ 0 { # ISO
++ iso_hli <-64>
++ }
++ 1 { # User Specific
++ user_hli <-64>
++ }
++
++ 2 { # High layer profile - UNI 3.0 only
++ hlp <32>
++ }
++
++ 3 { # Vendor-Specific Application identifier
++ hli_oui <24>
++ app_id <32>
++ }
++
++ 4 { # Reference to ITU-T SG 1 B-ISDN Teleservice Recommendation
++ tobedefined <8>
++ }
++
++ }
++ }
++}
++
++
++def ie_blli = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _lid <2@6,more> = multi {
++ 1 {
++ _ext <1@8,more> = 1
++ uil1_proto <5@1>
++ }
++ 2 {
++ uil2_proto "atm_l2" <5@1,more> = case {
++ ATM_L2_X25_LL,ATM_L2_X25_ML,ATM_L2_HDLC_ARM,
++ ATM_L2_HDLC_NRM,ATM_L2_HDLC_ABM,ATM_L2_Q922,
++ ATM_L2_ISO7776 { # CCITT encoding
++ _ext <1@8> = case {
++ 0 {
++ l2_mode "atm_imd" <2@6,more> = ATM_IMD_NORMAL
++ q933 <2@1,more> = 0
++ _ext <1@8> = case {
++ 0 {
++ window_size <7@1,more>
++ _ext <1@8> = 1
++ }
++ default 1 {}
++ }
++ }
++ default 1 {}
++ }
++ }
++ ATM_L2_USER { # User specified
++ _ext <1@8> = 0
++ user_l2 <7@1,more>
++ _ext <1@8> = 1
++ }
++ default ATM_L2_ISO1745,ATM_L2_Q291,ATM_L2_LAPB,
++ ATM_L2_ISO8802,ATM_L2_X75 { # No additional data
++ _ext <1@8> = 1
++ }
++ }
++ }
++ 3 {
++ uil3_proto "atm_l3" <5@1,more> = case {
++ ATM_L3_X25,ATM_L3_ISO8208,ATM_L3_X223 { # CCITT coding
++ _ext <1@8> = case {
++ 0 {
++ l3_mode "atm_imd" <2@6,more> = ATM_IMD_NORMAL
++ _ext <1@8> = case {
++ 0 {
++ def_pck_size <4@1,more>
++ _ext <1@8> = case {
++ 0 {
++ _ext <1@8> = 1
++ pck_win_size <7@1>
++ }
++ default 1 {}
++ }
++ }
++ default 1 {}
++ }
++ }
++ default 1 {}
++ }
++ }
++
++ ATM_L3_H310 { # ITU-T Rec. H.310
++ _ext <1@8> = case {
++ 0 {
++ term_type "atm_tt" <4@1,more> = ATM_TT_RXTX
++ _ext <1@8> = case {
++ 0 {
++ _ext <1@8,more> = 1
++ fw_mpx_cap "atm_mc" <3@4,more> =
++ ATM_MC_NONE
++ bw_mpx_cap "atm_mc" <3@1> = ATM_MC_NONE
++ }
++ default 1 {}
++ }
++ }
++ default 1 {}
++ }
++ }
++
++ ATM_L3_TR9577 { # ISO/IEC TR9577
++ _ext <1@8> = case {
++ 0 {
++ _ext <1@8,more> = 0
++ ipi_high <7@1> = case {
++ 0x40 { # SNAP hack
++ _ext <1@8,more> = 1
++ _ipi_low <1@7> = case { # ugly
++ 0 {
++ _ext <1@8,more> = 1
++ _snap_id <2@6> = 0
++ oui <24>
++ pid <16>
++ }
++ default 1 {}
++ }
++ }
++ default 0x0 { # ugly
++ _ext <1@8,more> = 1
++ ipi_low <1@7>
++ }
++ }
++ }
++ default 1 {}
++ }
++ }
++ ATM_L3_USER { # User specified
++ _ext <1@8> = 0
++ user_l3 <7@1,more>
++ _ext <1@8> = 1
++ }
++ }
++ }
++ }
++ }
++}
++
++
++def ie_call_state = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ call_state <6@1>
++ }
++}
++
++
++def ie_cdpn = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++ _plan "atm_np" <4@1,more> = case {
++ ATM_NP_E164 {
++ _type "atm_ton" <3@5> = ATM_TON_INTRNTNL
++ cdpn_e164 <-96>
++ }
++ ATM_NP_AEA { # ATM Endsystem Address
++ _type "atm_ton" <3@5> = ATM_TON_UNKNOWN
++ cdpn_esa <-160>
++ }
++ }
++ }
++}
++
++
++def ie_cdps = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++
++
++
++
++ cdps_type "atm_sat" <3@5,more> = ATM_SAT_AEA
++
++ _oddeven <1@4> = 0
++ cdps <-160>
++ }
++}
++
++
++def ie_cgpn = { # @@@ extend language to allow same trick as for cdpn
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ cgpn_plan "atm_np" <4@1,more>
++ cgpn_type "atm_ton" <3@5,more>
++ _ext <1@8> = case {
++ 0 {
++ _ext <1@8,more> = 1
++ pres_ind "atm_prs" <2@6,more> = ATM_PRS_ALLOW
++ scr_ind "atm_scrn" <2@1> = ATM_SCRN_UP_NS
++ }
++ default 1 {}
++ }
++ cgpn <-160>
++ }
++}
++
++
++def ie_cgps = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++
++
++
++
++ cgps_type "atm_sat" <3@5,more> = ATM_SAT_AEA
++
++ _oddeven <1@4> = 0
++ cgps <-160>
++ }
++}
++
++
++def ie_cause = {
++ _ext <1@8,more> = 1 cause_cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++ location "atm_loc" <4@1> = ATM_LOC_USER
++ _ext <1@8,more> = 1
++ cause "atm_cv" <7@1> = case {
++ ATM_CV_UNALLOC,ATM_CV_NO_ROUTE_DEST,ATM_CV_QOS_UNAVAIL { # Note 2
++ break
++ _ext <1@8,more> = 1
++ pu "atm_pu" <1@4,more> = ATM_PU_USER
++ na "atm_na" <1@3,more> = ATM_NA_NORMAL
++ cond2 "atm_cond" <2@1> = ATM_COND_UNKNOWN
++ }
++ ATM_CV_CALL_REJ { # Note 3
++ break
++ _ext <1@8,more> = 1
++ cond3 "atm_cond" <2@1,more> = ATM_COND_UNKNOWN
++ reason <5@3> = case {
++ ATM_RSN_USER {
++ user_diag <-216>
++ }
++ ATM_RSN_IE_MISS,ATM_RSN_IE_INSUFF {
++ ie_id3 "atm_ie" <8>
++ }
++ }
++ }
++ ATM_CV_NUM_CHANGED { # Note 4
++ break
++ new_dest <-224> # good luck ...
++ }
++ ATM_CV_REJ_CLIR { # Note 5
++ break
++ invalid <8> # not supported
++ }
++ ATM_CV_ACC_INF_DISC,ATM_CV_INCOMP_DEST,ATM_CV_MAND_IE_MISSING,
++ ATM_CV_UNKNOWN_IE,ATM_CV_INVALID_IE { # Note 6
++ break
++ ie_id6 <-224>
++ }
++
++ ATM_CV_UCR_UNAVAIL_OLD,ATM_CV_UCR_UNAVAIL_NEW { # Note 8
++
++
++
++
++
++
++
++ break
++ ucr_id <-224>
++ }
++ ATM_CV_NO_SUCH_CHAN { # Note 9
++ break
++ unav_vpci <16>
++ unav_vci <16>
++ }
++ ATM_CV_UNKNOWN_MSG_TYPE,ATM_CV_INCOMP_MSG { # Note 10
++ break
++ bad_msg_type "atm_msg" <8>
++ }
++ ATM_CV_TIMER_EXP { # Note 11
++ break
++ timer <24>
++ }
++ default 0 {}
++ }
++ }
++}
++
++
++def ie_conn_id = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++ _vp_ass "atm_vpa" <2@4,more> = ATM_VPA_EXPL
++ _pref_exc "atm_poe" <3@1> = 0
++ vpi <16>
++ vci <16>
++ }
++}
++
++
++
++
++def ie_e2e_tdl = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _id "atm_tdl" <8> = multi {
++ ATM_TDL_CUM {
++ cum_delay <16>
++ }
++ ATM_TDL_E2EMAX {
++ max_delay <16>
++ }
++ ATM_TDL_NGI {}
++ }
++
++ }
++}
++
++
++
++
++def ie_qos = {
++# 467 "<stdin>"
++ _ext <1@8,more> = 1 qos_cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++
++ qos_fw <8> = 0
++ qos_bw <8> = 0
++ }
++}
++
++
++def ie_bbrep = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++ rep_ind <4@1> = 2
++ }
++}
++
++
++def ie_restart = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++ rst_class <3@1>
++ }
++}
++
++
++def ie_bbs_comp = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++ bbsc_ind <7@1> = 0x21
++ }
++}
++
++
++def ie_tns = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++ _net_type "atm_tni" <3@5,more> = ATM_TNI_NNI
++ _carrier_id "atm_nip" <4@1> = ATM_NIP_CARRIER
++ net_id <-32>
++ }
++}
++
++
++
++
++def ie_notify = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ notification <-32> # @@@ how many actually ?
++ }
++}
++
++
++def ie_oam_td = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ext <1@8,more> = 1
++ shaping "atm_shi" <2@6,more> = ATM_SHI_NONE
++ compliance "atm_oci" <1@5,more> = ATM_OCI_OPT
++ fault "atm_unfm" <3@1> = ATM_UNFM_NONE
++ _ext <1@8,more> = 1
++ fwd_ofi "atm_ofi" <3@5,more> = ATM_OFI_0_0
++ bwd_ofi "atm_ofi" <3@1> = ATM_OFI_0_0
++ }
++}
++
++
++def ie_git = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
++ _dummy <1@8> = 0 # bit is "spare", although not indicated in spec
++ id_std_app "atm_irs" <7@1> = case {
++ ATM_IRS_DSMCC,ATM_IRS_H245 {
++ _type "atm_it" <8> = ATM_IT_SESSION
++ _length <8> = length {
++ session_id <-160>
++ }
++ _type "atm_it" <8> = ATM_IT_RESOURCE
++ _length <8> = length {
++ resource_id <-32>
++ }
++ }
++ default 0 {
++ unrecognized_git_identifiers <-224> # 33-5 bytes
++ }
++ }
++ }
++}
++
++
++def ie_lij_id = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
++ _ext <1@8,more> = 1
++ lij_id_type "atm_lit" <7@1> = ATM_LIT_ROOT
++ lij_id <32>
++ }
++}
++
++
++def ie_lij_prm = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
++ _ext <1@8,more> = 1
++ lij_scr_ind "atm_lsi" <2@1>
++ }
++}
++
++
++def ie_leaf_sn = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
++ leaf_sn <32>
++ }
++}
++
++
++def ie_scope_sel = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
++ _ext <1@8,more> = 1
++ scope_type "atm_tcs" <4@1> = ATM_TCS_ORGANIZATIONAL
++ scope_sel "atm_css" <8>
++ }
++}
++
++
++def ie_alt_td = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _id "atm_td" <8> = multi {
++ ATM_TD_FW_PCR_0 { altfw_pcr_0 <24> } ATM_TD_BW_PCR_0 { altbw_pcr_0 <24> } ATM_TD_FW_PCR_01 { altfw_pcr_01 <24> } ATM_TD_BW_PCR_01 { altbw_pcr_01 <24> } ATM_TD_FW_SCR_0 { altfw_scr_0 <24> } ATM_TD_BW_SCR_0 { altbw_scr_0 <24> } ATM_TD_FW_SCR_01 { altfw_scr_01 <24> } ATM_TD_BW_SCR_01 { altbw_scr_01 <24> } ATM_TD_FW_MBS_0 { altfw_mbs_0 <24> } ATM_TD_BW_MBS_0 { altbw_mbs_0 <24> } ATM_TD_FW_MBS_01 { altfw_mbs_01 <24> } ATM_TD_BW_MBS_01 { altbw_mbs_01 <24> } ATM_TD_BEST_EFFORT { altbest_effort <0> }
++ }
++ }
++}
++
++
++def ie_min_td = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
++ _id "atm_td" <8> = multi {
++ ATM_TD_FW_PCR_0 { minfw_pcr_0 <24> } ATM_TD_BW_PCR_0 { minbw_pcr_0 <24> } ATM_TD_FW_PCR_01 { minfw_pcr_01 <24> } ATM_TD_BW_PCR_01 { minbw_pcr_01 <24> }
++ ATM_TD_FW_MCR_01 { minfw_mcr_01 <24> } ATM_TD_BW_MCR_01 { minbw_mcr_01 <24> }
++ }
++ }
++}
++
++
++def ie_eqos = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ eqos_origin "atm_eqo" <8>
++ _id "atm_eqp" <8> = multi {
++ ATM_EQP_ACC_FW_CDV {
++ acc_fw_cdv <24>
++ }
++ ATM_EQP_ACC_BW_CDV {
++ acc_bw_cdv <24>
++ }
++ ATM_EQP_CUM_FW_CDV {
++ cum_fw_cdv <24>
++ }
++ ATM_EQP_CUM_BW_CDV {
++ cum_bw_cdv <24>
++ }
++ ATM_EQP_ACC_FW_CLR {
++ acc_fw_clr <8>
++ }
++ ATM_EQP_ACC_BW_CLR {
++ acc_bw_clr <8>
++ }
++ }
++ }
++}
++
++
++def ie_abr_add_prm = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _id "atm_aap" <8> = multi {
++ ATM_AAP_FW_REC {
++ abr_fw_add_rec <32>
++ }
++ ATM_AAP_BW_REC {
++ abr_bw_add_rec <32>
++ }
++ }
++ }
++}
++
++
++def ie_abr_set_prm = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_NET _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length { # @@@ UNI 4.0 does not specify the coding
++ _id "atm_asp" <8> = multi {
++ ATM_ASP_FW_ICR {
++ abr_fw_icr <24>
++ }
++ ATM_ASP_BW_ICR {
++ abr_bw_icr <24>
++ }
++ ATM_ASP_FW_TBE {
++ abr_fw_tbe <24>
++ }
++ ATM_ASP_BW_TBE {
++ abr_bw_tbe <24>
++ }
++ ATM_ASP_CRF_RTT {
++ atm_crf_rtt <24>
++ }
++ ATM_ASP_FW_RIF {
++ atm_fw_rif <8>
++ }
++ ATM_ASP_BW_RIF {
++ atm_bw_rif <8>
++ }
++ ATM_ASP_FW_RDF {
++ atm_fw_rdf <8>
++ }
++ ATM_ASP_BW_RDF {
++ atm_bw_rdf <8>
++ }
++ }
++ }
++}
++
++
++
++
++def ie_ep_ref = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ _ep_type <8> = 0
++ ep_ref <16>
++ }
++}
++
++
++def ie_ep_state = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ ep_state <6@1>
++ }
++}
++
++
++
++
++def ie_bbrt = {
++ _ext <1@8,more> = 1 _cs "q2931_cs" <2@6,more> = Q2931_CS_ITU _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length {
++ type_of_report "atm_tor" <8>
++ }
++}
++
++
++
++
++{
++ _pdsc "q2931_proto" <8> = Q2931_PROTO_DSC
++ _cr_len <8> = 3
++ call_ref <24>
++ msg_type "atm_msg" <8>
++ _ext <1@8,more> = 1
++ _flag "atm_flag" <1@5,more> = ATM_FLAG_NO
++ _action_ind "atm_ai_msg" <2@1> = 0
++ msg_len <16> = length {
++ _ie_id "atm_ie" <8> = multi {
++ aal: ATM_IE_AAL ie_aal
++ td: ATM_IE_TD ie_td
++ bbcap: ATM_IE_BBCAP ie_bbcap
++ bhli: ATM_IE_BHLI ie_bhli
++ blli1: ATM_IE_BLLI ie_blli
++ blli2: ATM_IE_BLLI ie_blli
++ blli3: ATM_IE_BLLI ie_blli
++ call_state: ATM_IE_CALL_STATE ie_call_state
++ cdpn: ATM_IE_CDPN ie_cdpn
++ cdps: ATM_IE_CDPS ie_cdps
++ cgpn: ATM_IE_CGPN ie_cgpn
++ cgps: ATM_IE_CGPS ie_cgps
++ cause: ATM_IE_CAUSE ie_cause
++ cause2: ATM_IE_CAUSE ie_cause
++ conn_id: ATM_IE_CONN_ID ie_conn_id
++
++ e2e_tdl: ATM_IE_E2E_TDL ie_e2e_tdl
++
++ qos: ATM_IE_QOS ie_qos
++ bbrep: ATM_IE_BBREP ie_bbrep
++ restart: ATM_IE_RESTART ie_restart
++ bbs_comp: ATM_IE_BBS_COMP ie_bbs_comp
++ tns: ATM_IE_TNS ie_tns
++
++ notify: ATM_IE_NOTIFY ie_notify
++ oam_td: ATM_IE_OAM_TD ie_oam_td
++ git: ATM_IE_GIT ie_git
++ git2: ATM_IE_GIT ie_git
++ git3: ATM_IE_GIT ie_git
++ lij_id: ATM_IE_LIJ_ID ie_lij_id
++ lij_prm: ATM_IE_LIJ_PRM ie_lij_prm
++ leaf_sn: ATM_IE_LEAF_SN ie_leaf_sn
++ scope_sel: ATM_IE_SCOPE_SEL ie_scope_sel
++ alt_td: ATM_IE_ALT_TD ie_alt_td
++ min_td: ATM_IE_MIN_TD ie_min_td
++ eqos: ATM_IE_EQOS ie_eqos
++ abr_add_prm:ATM_IE_ABR_ADD_PRM ie_abr_add_prm
++ abr_set_prm:ATM_IE_ABR_SET_PRM ie_abr_set_prm
++
++ ep_ref: ATM_IE_EPR ie_ep_ref
++ ep_state: ATM_IE_EP_STATE ie_ep_state
++
++ bbrt: ATM_IE_BBRT ie_bbrt
++
++ default 0 {
++ _ext <1@8,more> = 1 __cs "q2931_cs" <2@6,more> = 0 _flag "atm_flag" <1@5,more> = ATM_FLAG_NO _action_ind "atm_ai_ie" <3@1> = 0 _ie_len <16> = recover RECOV_IND_IE length
++ abort RECOV_ASE_UNKNOWN_IE
++ }
++ }
++ }
++}
+--- linux-atm-2.4.1.orig/src/saal/Makefile.in
++++ linux-atm-2.4.1/src/saal/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -87,8 +87,7 @@
+
+ noinst_LIBRARIES = libsaal.a
+
+-libsaal_a_SOURCES = pdu.h queue.h saal.h sscf.h sscop.h pdu.c queue.c saal.c \
+- sscf.c sscop.c
++libsaal_a_SOURCES = pdu.h queue.h saal.h sscf.h sscop.h pdu.c queue.c saal.c sscf.c sscop.c
+
+ mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+ CONFIG_HEADER = ../../config.h
+@@ -114,8 +113,10 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/pdu.P .deps/queue.P .deps/saal.P .deps/sscf.P \
++.deps/sscop.P
+ SOURCES = $(libsaal_a_SOURCES)
+ OBJECTS = $(libsaal_a_OBJECTS)
+
+@@ -123,9 +124,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/saal/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/saal/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -139,9 +140,6 @@
+
+ maintainer-clean-noinstLIBRARIES:
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -164,9 +162,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -206,7 +201,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -222,6 +217,11 @@
+ subdir = src/saal
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/saal/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -232,20 +232,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-pdu.o: pdu.c ../../config.h ../../src/include/stdint.h pdu.h \
+- ../../src/include/atmd.h ../../src/include/atm.h
+-queue.o: queue.c ../../config.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h queue.h
+-saal.o: saal.c ../../config.h sscop.h ../../src/include/stdint.h \
+- ../../src/include/atmd.h ../../src/include/atm.h queue.h saal.h \
+- sscf.h
+-sscf.o: sscf.c ../../config.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h sscop.h \
+- queue.h sscf.h
+-sscop.o: sscop.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atmd.h ../../src/include/atm.h sscop.h \
+- queue.h pdu.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -282,27 +300,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-noinstLIBRARIES clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-noinstLIBRARIES distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -313,12 +331,14 @@
+ mostlyclean-compile distclean-compile clean-compile \
+ maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+ clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/sigd/Makefile.in
++++ linux-atm-2.4.1/src/sigd/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -88,14 +88,9 @@
+ INCLUDES = -I$(top_builddir)/src/qgen -I$(top_builddir)/src/saal -I.
+
+ sbin_PROGRAMS = atmsigd
+-atmsigd_SOURCES = atmsigd.c io.c io.h kernel.c proto.c proto.h uni.c \
+- sap.c sap.h timeout.c timeout.h trace.c trace.h \
+- policy.c policy.h cfg_y.y cfg_l.l
+-
+-atmsigd_XTRAS = mess.o $(top_builddir)/src/qgen/q.out.o \
+- $(top_builddir)/src/qgen/qd.dump.o \
+- $(top_builddir)/src/lib/libatm.la \
+- $(top_builddir)/src/saal/libsaal.a
++atmsigd_SOURCES = atmsigd.c io.c io.h kernel.c proto.c proto.h uni.c sap.c sap.h timeout.c timeout.h trace.c trace.h policy.c policy.h cfg_y.y cfg_l.l
++
++atmsigd_XTRAS = mess.o $(top_builddir)/src/qgen/q.out.o $(top_builddir)/src/qgen/qd.dump.o $(top_builddir)/src/lib/libatm.la $(top_builddir)/src/saal/libsaal.a
+
+ atmsigd_LDADD = $(atmsigd_XTRAS) -lfl
+ atmsigd_DEPENDENCIES = mess.c $(atmsigd_XTRAS)
+@@ -140,8 +135,11 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/atmsigd.P .deps/cfg_l.P .deps/cfg_y.P .deps/io.P \
++.deps/kernel.P .deps/policy.P .deps/proto.P .deps/sap.P .deps/timeout.P \
++.deps/trace.P .deps/uni.P
+ SOURCES = $(atmsigd_SOURCES)
+ OBJECTS = $(atmsigd_OBJECTS)
+
+@@ -149,9 +147,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .l .lo .o .obj .s .y
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/sigd/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/sigd/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -181,9 +179,6 @@
+ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -206,9 +201,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -347,7 +339,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -363,6 +355,11 @@
+ subdir = src/sigd
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/sigd/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -373,69 +370,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-atmsigd.o: atmsigd.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h \
+- ../../src/qgen/qlib.h io.h proto.h ../../src/include/atmsap.h \
+- ../../src/saal/saal.h ../../src/saal/sscf.h \
+- ../../src/saal/sscop.h ../../src/saal/queue.h trace.h
+-cfg_l.o: cfg_l.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h cfg_y.h
+-cfg_y.o: cfg_y.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h proto.h \
+- ../../src/include/atmsap.h ../../src/saal/saal.h \
+- ../../src/saal/sscf.h ../../src/saal/sscop.h \
+- ../../src/saal/queue.h io.h trace.h policy.h
+-io.o: io.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h \
+- ../../src/qgen/uni.h ../../src/saal/pdu.h proto.h \
+- ../../src/include/atmsap.h ../../src/saal/saal.h \
+- ../../src/saal/sscf.h ../../src/saal/sscop.h \
+- ../../src/saal/queue.h io.h trace.h
+-kernel.o: kernel.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h \
+- ../../src/qgen/uni.h ../../src/qgen/qlib.h \
+- ../../src/qgen/q.out.h proto.h ../../src/include/atmsap.h \
+- ../../src/saal/saal.h ../../src/saal/sscf.h \
+- ../../src/saal/sscop.h ../../src/saal/queue.h sap.h io.h \
+- policy.h timeout.h
+-mess.o: mess.c ../../config.h
+-policy.o: policy.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h proto.h \
+- ../../src/include/atmsap.h ../../src/saal/saal.h \
+- ../../src/saal/sscf.h ../../src/saal/sscop.h \
+- ../../src/saal/queue.h policy.h
+-proto.o: proto.c ../../config.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h \
+- ../../src/qgen/uni.h ../../src/qgen/qlib.h \
+- ../../src/qgen/q.out.h io.h proto.h ../../src/include/atmsap.h \
+- ../../src/saal/saal.h ../../src/saal/sscf.h \
+- ../../src/saal/sscop.h ../../src/saal/queue.h sap.h
+-sap.o: sap.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h \
+- ../../src/qgen/uni.h ../../src/qgen/qlib.h \
+- ../../src/qgen/q.out.h ../../src/qgen/common.h proto.h \
+- ../../src/include/atmsap.h ../../src/saal/saal.h \
+- ../../src/saal/sscf.h ../../src/saal/sscop.h \
+- ../../src/saal/queue.h sap.h
+-timeout.o: timeout.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h \
+- ../../src/qgen/uni.h proto.h ../../src/include/atmsap.h \
+- ../../src/saal/saal.h ../../src/saal/sscf.h \
+- ../../src/saal/sscop.h ../../src/saal/queue.h timeout.h
+-trace.o: trace.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h \
+- ../../src/include/atmsap.h trace.h proto.h \
+- ../../src/saal/saal.h ../../src/saal/sscf.h \
+- ../../src/saal/sscop.h ../../src/saal/queue.h \
+- ../../src/qgen/qlib.h
+-uni.o: uni.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h \
+- ../../src/qgen/uni.h ../../src/qgen/qlib.h \
+- ../../src/qgen/q.out.h proto.h ../../src/include/atmsap.h \
+- ../../src/saal/saal.h ../../src/saal/sscf.h \
+- ../../src/saal/sscop.h ../../src/saal/queue.h sap.h io.h \
+- policy.h timeout.h trace.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -474,29 +440,29 @@
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+ maintainer-clean-generic:
+- -test -z "cfg_llcfg_yhcfg_yc" || rm -f cfg_ll cfg_yh cfg_yc
++ -test -z "cfg_lccfg_yhcfg_yc" || rm -f cfg_lc cfg_yh cfg_yc
+ mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-sbinPROGRAMS distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -509,12 +475,14 @@
+ distclean-libtool clean-libtool maintainer-clean-libtool install-man4 \
+ uninstall-man4 install-man8 uninstall-man8 install-man uninstall-man \
+ uninstall-sysconfDATA install-sysconfDATA tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ mess.c: $(top_builddir)/src/qgen/uni.h mkmess.pl
+--- linux-atm-2.4.1.orig/src/sigd/cfg_y.c
++++ linux-atm-2.4.1/src/sigd/cfg_y.c
+@@ -1,46 +1,137 @@
++/* A Bison parser, made by GNU Bison 1.875d. */
+
+-/* A Bison parser, made from cfg_y.y
+- by GNU Bison version 1.28 */
++/* Skeleton parser for Yacc-like parsing with Bison,
++ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+
+-#define YYBISON 1 /* Identify Bison output. */
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2, or (at your option)
++ any later version.
+
+-#define TOK_LEVEL 257
+-#define TOK_DEBUG 258
+-#define TOK_INFO 259
+-#define TOK_WARN 260
+-#define TOK_ERROR 261
+-#define TOK_FATAL 262
+-#define TOK_SIG 263
+-#define TOK_UNI30 264
+-#define TOK_UNI31 265
+-#define TOK_UNI40 266
+-#define TOK_Q2963_1 267
+-#define TOK_SAAL 268
+-#define TOK_VC 269
+-#define TOK_IO 270
+-#define TOK_MODE 271
+-#define TOK_USER 272
+-#define TOK_NET 273
+-#define TOK_SWITCH 274
+-#define TOK_VPCI 275
+-#define TOK_ITF 276
+-#define TOK_PCR 277
+-#define TOK_TRACE 278
+-#define TOK_POLICY 279
+-#define TOK_ALLOW 280
+-#define TOK_REJECT 281
+-#define TOK_ENTITY 282
+-#define TOK_DEFAULT 283
+-#define TOK_NUMBER 284
+-#define TOK_MAX_RATE 285
+-#define TOK_DUMP_DIR 286
+-#define TOK_LOGFILE 287
+-#define TOK_QOS 288
+-#define TOK_FROM 289
+-#define TOK_TO 290
+-#define TOK_ROUTE 291
+-#define TOK_PVC 292
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
+
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place - Suite 330,
++ Boston, MA 02111-1307, USA. */
++
++/* As a special exception, when this file is copied by Bison into a
++ Bison output file, you may use that output file without restriction.
++ This special exception was added by the Free Software Foundation
++ in version 1.24 of Bison. */
++
++/* Written by Richard Stallman by simplifying the original so called
++ ``semantic'' parser. */
++
++/* All symbols defined below should begin with yy or YY, to avoid
++ infringing on user name space. This should be done even for local
++ variables, as they might otherwise be expanded by user macros.
++ There are some unavoidable exceptions within include files to
++ define necessary library symbols; they are noted "INFRINGES ON
++ USER NAME SPACE" below. */
++
++/* Identify Bison output. */
++#define YYBISON 1
++
++/* Skeleton name. */
++#define YYSKELETON_NAME "yacc.c"
++
++/* Pure parsers. */
++#define YYPURE 0
++
++/* Using locations. */
++#define YYLSP_NEEDED 0
++
++
++
++/* Tokens. */
++#ifndef YYTOKENTYPE
++# define YYTOKENTYPE
++ /* Put the tokens into the symbol table, so that GDB and other debuggers
++ know about them. */
++ enum yytokentype {
++ TOK_LEVEL = 258,
++ TOK_DEBUG = 259,
++ TOK_INFO = 260,
++ TOK_WARN = 261,
++ TOK_ERROR = 262,
++ TOK_FATAL = 263,
++ TOK_SIG = 264,
++ TOK_UNI30 = 265,
++ TOK_UNI31 = 266,
++ TOK_UNI40 = 267,
++ TOK_Q2963_1 = 268,
++ TOK_SAAL = 269,
++ TOK_VC = 270,
++ TOK_IO = 271,
++ TOK_MODE = 272,
++ TOK_USER = 273,
++ TOK_NET = 274,
++ TOK_SWITCH = 275,
++ TOK_VPCI = 276,
++ TOK_ITF = 277,
++ TOK_PCR = 278,
++ TOK_TRACE = 279,
++ TOK_POLICY = 280,
++ TOK_ALLOW = 281,
++ TOK_REJECT = 282,
++ TOK_ENTITY = 283,
++ TOK_DEFAULT = 284,
++ TOK_NUMBER = 285,
++ TOK_MAX_RATE = 286,
++ TOK_DUMP_DIR = 287,
++ TOK_LOGFILE = 288,
++ TOK_QOS = 289,
++ TOK_FROM = 290,
++ TOK_TO = 291,
++ TOK_ROUTE = 292,
++ TOK_PVC = 293
++ };
++#endif
++#define TOK_LEVEL 258
++#define TOK_DEBUG 259
++#define TOK_INFO 260
++#define TOK_WARN 261
++#define TOK_ERROR 262
++#define TOK_FATAL 263
++#define TOK_SIG 264
++#define TOK_UNI30 265
++#define TOK_UNI31 266
++#define TOK_UNI40 267
++#define TOK_Q2963_1 268
++#define TOK_SAAL 269
++#define TOK_VC 270
++#define TOK_IO 271
++#define TOK_MODE 272
++#define TOK_USER 273
++#define TOK_NET 274
++#define TOK_SWITCH 275
++#define TOK_VPCI 276
++#define TOK_ITF 277
++#define TOK_PCR 278
++#define TOK_TRACE 279
++#define TOK_POLICY 280
++#define TOK_ALLOW 281
++#define TOK_REJECT 282
++#define TOK_ENTITY 283
++#define TOK_DEFAULT 284
++#define TOK_NUMBER 285
++#define TOK_MAX_RATE 286
++#define TOK_DUMP_DIR 287
++#define TOK_LOGFILE 288
++#define TOK_QOS 289
++#define TOK_FROM 290
++#define TOK_TO 291
++#define TOK_ROUTE 292
++#define TOK_PVC 293
++
++
++
++
++/* Copy the first part of user declarations. */
+ #line 1 "cfg_y.y"
+
+ /* cfg.y - configuration language */
+@@ -51,6 +142,7 @@
+ #include <config.h>
+ #endif
+
++#include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
+ #include <limits.h>
+@@ -63,6 +155,8 @@
+ #include "trace.h"
+ #include "policy.h"
+
++extern void yywarn(const char *s);
++extern void yyerror(const char *s);
+
+ static RULE *rule;
+ static SIG_ENTITY *curr_sig = &_entity;
+@@ -93,516 +187,830 @@
+ }
+
+
+-#line 53 "cfg_y.y"
+-typedef union {
++
++/* Enabling traces. */
++#ifndef YYDEBUG
++# define YYDEBUG 0
++#endif
++
++/* Enabling verbose error messages. */
++#ifdef YYERROR_VERBOSE
++# undef YYERROR_VERBOSE
++# define YYERROR_VERBOSE 1
++#else
++# define YYERROR_VERBOSE 0
++#endif
++
++#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
++#line 56 "cfg_y.y"
++typedef union YYSTYPE {
+ int num;
+ char *str;
+ struct sockaddr_atmpvc pvc;
+ } YYSTYPE;
+-#include <stdio.h>
++/* Line 191 of yacc.c. */
++#line 213 "y.tab.c"
++# define yystype YYSTYPE /* obsolescent; will be withdrawn */
++# define YYSTYPE_IS_DECLARED 1
++# define YYSTYPE_IS_TRIVIAL 1
++#endif
++
++
++
++/* Copy the second part of user declarations. */
++
++
++/* Line 214 of yacc.c. */
++#line 225 "y.tab.c"
++
++#if ! defined (yyoverflow) || YYERROR_VERBOSE
++
++# ifndef YYFREE
++# define YYFREE free
++# endif
++# ifndef YYMALLOC
++# define YYMALLOC malloc
++# endif
++
++/* The parser invokes alloca or malloc; define the necessary symbols. */
++
++# ifdef YYSTACK_USE_ALLOCA
++# if YYSTACK_USE_ALLOCA
++# define YYSTACK_ALLOC alloca
++# endif
++# else
++# if defined (alloca) || defined (_ALLOCA_H)
++# define YYSTACK_ALLOC alloca
++# else
++# ifdef __GNUC__
++# define YYSTACK_ALLOC __builtin_alloca
++# endif
++# endif
++# endif
++
++# ifdef YYSTACK_ALLOC
++ /* Pacify GCC's `empty if-body' warning. */
++# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
++# else
++# if defined (__STDC__) || defined (__cplusplus)
++# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
++# define YYSIZE_T size_t
++# endif
++# define YYSTACK_ALLOC YYMALLOC
++# define YYSTACK_FREE YYFREE
++# endif
++#endif /* ! defined (yyoverflow) || YYERROR_VERBOSE */
++
++
++#if (! defined (yyoverflow) \
++ && (! defined (__cplusplus) \
++ || (defined (YYSTYPE_IS_TRIVIAL) && YYSTYPE_IS_TRIVIAL)))
++
++/* A type that is properly aligned for any stack member. */
++union yyalloc
++{
++ short int yyss;
++ YYSTYPE yyvs;
++ };
++
++/* The size of the maximum gap between one aligned stack and the next. */
++# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
++
++/* The size of an array large to enough to hold all stacks, each with
++ N elements. */
++# define YYSTACK_BYTES(N) \
++ ((N) * (sizeof (short int) + sizeof (YYSTYPE)) \
++ + YYSTACK_GAP_MAXIMUM)
++
++/* Copy COUNT objects from FROM to TO. The source and destination do
++ not overlap. */
++# ifndef YYCOPY
++# if defined (__GNUC__) && 1 < __GNUC__
++# define YYCOPY(To, From, Count) \
++ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
++# else
++# define YYCOPY(To, From, Count) \
++ do \
++ { \
++ register YYSIZE_T yyi; \
++ for (yyi = 0; yyi < (Count); yyi++) \
++ (To)[yyi] = (From)[yyi]; \
++ } \
++ while (0)
++# endif
++# endif
++
++/* Relocate STACK from its old location to the new one. The
++ local variables YYSIZE and YYSTACKSIZE give the old and new number of
++ elements in the stack, and YYPTR gives the new location of the
++ stack. Advance YYPTR to a properly aligned location for the next
++ stack. */
++# define YYSTACK_RELOCATE(Stack) \
++ do \
++ { \
++ YYSIZE_T yynewbytes; \
++ YYCOPY (&yyptr->Stack, Stack, yysize); \
++ Stack = &yyptr->Stack; \
++ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
++ yyptr += yynewbytes / sizeof (*yyptr); \
++ } \
++ while (0)
+
+-#ifndef __cplusplus
+-#ifndef __STDC__
+-#define const
+-#endif
+ #endif
+
++#if defined (__STDC__) || defined (__cplusplus)
++ typedef signed char yysigned_char;
++#else
++ typedef short int yysigned_char;
++#endif
+
+-
+-#define YYFINAL 117
+-#define YYFLAG -32768
+-#define YYNTBASE 41
+-
+-#define YYTRANSLATE(x) ((unsigned)(x) <= 292 ? yytranslate[x] : 71)
+-
+-static const char yytranslate[] = { 0,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 39, 2, 40, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 1, 3, 4, 5, 6,
+- 7, 8, 9, 10, 11, 12, 13, 14, 15, 16,
+- 17, 18, 19, 20, 21, 22, 23, 24, 25, 26,
+- 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,
+- 37, 38
++/* YYFINAL -- State number of the termination state. */
++#define YYFINAL 53
++/* YYLAST -- Last index in YYTABLE. */
++#define YYLAST 108
++
++/* YYNTOKENS -- Number of terminals. */
++#define YYNTOKENS 41
++/* YYNNTS -- Number of nonterminals. */
++#define YYNNTS 31
++/* YYNRULES -- Number of rules. */
++#define YYNRULES 79
++/* YYNRULES -- Number of states. */
++#define YYNSTATES 117
++
++/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
++#define YYUNDEFTOK 2
++#define YYMAXUTOK 293
++
++#define YYTRANSLATE(YYX) \
++ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
++
++/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
++static const unsigned char yytranslate[] =
++{
++ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 39, 2, 40, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
++ 5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
++ 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
++ 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
++ 35, 36, 37, 38
+ };
+
+-#if YYDEBUG != 0
+-static const short yyprhs[] = { 0,
+- 0, 3, 4, 7, 8, 11, 14, 17, 20, 23,
+- 26, 29, 30, 35, 36, 40, 41, 44, 49, 52,
+- 54, 56, 58, 60, 62, 66, 67, 70, 72, 76,
+- 77, 80, 82, 86, 87, 90, 92, 96, 97, 100,
+- 102, 106, 107, 110, 113, 118, 120, 122, 124, 126,
+- 128, 131, 134, 137, 140, 143, 145, 147, 150, 152,
+- 154, 157, 158, 160, 162, 164, 166, 168, 170, 172,
+- 174, 176, 179, 180, 184, 186, 188, 190
++#if YYDEBUG
++/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
++ YYRHS. */
++static const unsigned char yyprhs[] =
++{
++ 0, 0, 3, 6, 7, 10, 11, 14, 17, 20,
++ 23, 26, 29, 32, 33, 38, 39, 43, 44, 47,
++ 52, 55, 57, 59, 61, 63, 65, 69, 70, 73,
++ 75, 79, 80, 83, 85, 89, 90, 93, 95, 99,
++ 100, 103, 105, 109, 110, 113, 116, 121, 123, 125,
++ 127, 129, 131, 134, 137, 140, 143, 146, 148, 150,
++ 153, 155, 157, 160, 161, 163, 165, 167, 169, 171,
++ 173, 175, 177, 179, 182, 183, 187, 189, 191, 193
+ };
+
+-static const short yyrhs[] = { 42,
+- 43, 0, 0, 44, 42, 0, 0, 45, 43, 0,
+- 3, 65, 0, 9, 50, 0, 14, 52, 0, 16,
+- 54, 0, 4, 56, 0, 25, 58, 0, 0, 28,
+- 38, 46, 47, 0, 0, 39, 48, 40, 0, 0,
+- 49, 48, 0, 21, 30, 22, 30, 0, 17, 66,
+- 0, 34, 0, 31, 0, 37, 0, 29, 0, 60,
+- 0, 39, 51, 40, 0, 0, 60, 51, 0, 61,
+- 0, 39, 53, 40, 0, 0, 61, 53, 0, 62,
+- 0, 39, 55, 40, 0, 0, 62, 55, 0, 63,
+- 0, 39, 57, 40, 0, 0, 63, 57, 0, 67,
+- 0, 39, 59, 40, 0, 0, 67, 59, 0, 3,
+- 65, 0, 21, 30, 22, 30, 0, 10, 0, 11,
+- 0, 12, 0, 13, 0, 19, 0, 17, 66, 0,
+- 3, 65, 0, 3, 65, 0, 15, 38, 0, 23,
+- 30, 0, 34, 0, 31, 0, 3, 65, 0, 32,
+- 0, 33, 0, 24, 64, 0, 0, 30, 0, 4,
+- 0, 5, 0, 6, 0, 7, 0, 8, 0, 18,
+- 0, 19, 0, 20, 0, 3, 65, 0, 0, 69,
+- 68, 70, 0, 26, 0, 27, 0, 35, 0, 36,
+- 0
++/* YYRHS -- A `-1'-separated list of the rules' RHS. */
++static const yysigned_char yyrhs[] =
++{
++ 42, 0, -1, 43, 44, -1, -1, 45, 43, -1,
++ -1, 46, 44, -1, 3, 66, -1, 9, 51, -1,
++ 14, 53, -1, 16, 55, -1, 4, 57, -1, 25,
++ 59, -1, -1, 28, 38, 47, 48, -1, -1, 39,
++ 49, 40, -1, -1, 50, 49, -1, 21, 30, 22,
++ 30, -1, 17, 67, -1, 34, -1, 31, -1, 37,
++ -1, 29, -1, 61, -1, 39, 52, 40, -1, -1,
++ 61, 52, -1, 62, -1, 39, 54, 40, -1, -1,
++ 62, 54, -1, 63, -1, 39, 56, 40, -1, -1,
++ 63, 56, -1, 64, -1, 39, 58, 40, -1, -1,
++ 64, 58, -1, 68, -1, 39, 60, 40, -1, -1,
++ 68, 60, -1, 3, 66, -1, 21, 30, 22, 30,
++ -1, 10, -1, 11, -1, 12, -1, 13, -1, 19,
++ -1, 17, 67, -1, 3, 66, -1, 3, 66, -1,
++ 15, 38, -1, 23, 30, -1, 34, -1, 31, -1,
++ 3, 66, -1, 32, -1, 33, -1, 24, 65, -1,
++ -1, 30, -1, 4, -1, 5, -1, 6, -1, 7,
++ -1, 8, -1, 18, -1, 19, -1, 20, -1, 3,
++ 66, -1, -1, 70, 69, 71, -1, 26, -1, 27,
++ -1, 35, -1, 36, -1
+ };
+
+-#endif
+-
+-#if YYDEBUG != 0
+-static const short yyrline[] = { 0,
+- 73, 77, 78, 81, 82, 105, 110, 111, 112, 113,
+- 114, 117, 138, 140, 141, 144, 145, 148, 153, 154,
+- 158, 162, 176, 182, 184, 187, 188, 191, 193, 196,
+- 197, 200, 202, 205, 206, 209, 211, 214, 215, 218,
+- 220, 223, 224, 227, 234, 238, 247, 256, 265, 274,
+- 279, 282, 290, 295, 299, 304, 308, 314, 319, 324,
+- 328, 334, 338, 344, 349, 353, 357, 361, 367, 372,
+- 376, 382, 387, 393, 395, 400, 406, 412
++/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
++static const unsigned short int yyrline[] =
++{
++ 0, 77, 77, 80, 81, 84, 85, 109, 113, 114,
++ 115, 116, 117, 122, 121, 151, 152, 155, 156, 160,
++ 164, 165, 169, 173, 187, 194, 195, 198, 199, 203,
++ 204, 207, 208, 212, 213, 216, 217, 221, 222, 225,
++ 226, 230, 231, 234, 235, 239, 245, 249, 258, 267,
++ 276, 285, 290, 294, 302, 306, 310, 315, 319, 326,
++ 330, 335, 339, 346, 349, 356, 360, 364, 368, 372,
++ 379, 383, 387, 394, 399, 398, 407, 411, 418, 423
+ };
+ #endif
+
+-
+-#if YYDEBUG != 0 || defined (YYERROR_VERBOSE)
+-
+-static const char * const yytname[] = { "$","error","$undefined.","TOK_LEVEL",
+-"TOK_DEBUG","TOK_INFO","TOK_WARN","TOK_ERROR","TOK_FATAL","TOK_SIG","TOK_UNI30",
+-"TOK_UNI31","TOK_UNI40","TOK_Q2963_1","TOK_SAAL","TOK_VC","TOK_IO","TOK_MODE",
+-"TOK_USER","TOK_NET","TOK_SWITCH","TOK_VPCI","TOK_ITF","TOK_PCR","TOK_TRACE",
+-"TOK_POLICY","TOK_ALLOW","TOK_REJECT","TOK_ENTITY","TOK_DEFAULT","TOK_NUMBER",
+-"TOK_MAX_RATE","TOK_DUMP_DIR","TOK_LOGFILE","TOK_QOS","TOK_FROM","TOK_TO","TOK_ROUTE",
+-"TOK_PVC","'{'","'}'","all","global","local","item","entity","@1","opt_options",
+-"options","option","sig","sig_items","saal","saal_items","io","io_items","debug",
+-"debug_items","policy","policy_items","sig_item","saal_item","io_item","debug_item",
+-"opt_trace_size","level","mode","policy_item","@2","action","direction", NULL
++#if YYDEBUG || YYERROR_VERBOSE
++/* YYTNME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
++ First, the terminals, then, starting at YYNTOKENS, nonterminals. */
++static const char *const yytname[] =
++{
++ "$end", "error", "$undefined", "TOK_LEVEL", "TOK_DEBUG", "TOK_INFO",
++ "TOK_WARN", "TOK_ERROR", "TOK_FATAL", "TOK_SIG", "TOK_UNI30",
++ "TOK_UNI31", "TOK_UNI40", "TOK_Q2963_1", "TOK_SAAL", "TOK_VC", "TOK_IO",
++ "TOK_MODE", "TOK_USER", "TOK_NET", "TOK_SWITCH", "TOK_VPCI", "TOK_ITF",
++ "TOK_PCR", "TOK_TRACE", "TOK_POLICY", "TOK_ALLOW", "TOK_REJECT",
++ "TOK_ENTITY", "TOK_DEFAULT", "TOK_NUMBER", "TOK_MAX_RATE",
++ "TOK_DUMP_DIR", "TOK_LOGFILE", "TOK_QOS", "TOK_FROM", "TOK_TO",
++ "TOK_ROUTE", "TOK_PVC", "'{'", "'}'", "$accept", "all", "global",
++ "local", "item", "entity", "@1", "opt_options", "options", "option",
++ "sig", "sig_items", "saal", "saal_items", "io", "io_items", "debug",
++ "debug_items", "policy", "policy_items", "sig_item", "saal_item",
++ "io_item", "debug_item", "opt_trace_size", "level", "mode",
++ "policy_item", "@2", "action", "direction", 0
+ };
+ #endif
+
+-static const short yyr1[] = { 0,
+- 41, 42, 42, 43, 43, 44, 44, 44, 44, 44,
+- 44, 46, 45, 47, 47, 48, 48, 49, 49, 49,
+- 49, 49, 49, 50, 50, 51, 51, 52, 52, 53,
+- 53, 54, 54, 55, 55, 56, 56, 57, 57, 58,
+- 58, 59, 59, 60, 60, 60, 60, 60, 60, 60,
+- 60, 61, 62, 62, 62, 62, 62, 63, 63, 63,
+- 63, 64, 64, 65, 65, 65, 65, 65, 66, 66,
+- 66, 67, 68, 67, 69, 69, 70, 70
++# ifdef YYPRINT
++/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
++ token YYLEX-NUM. */
++static const unsigned short int yytoknum[] =
++{
++ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
++ 265, 266, 267, 268, 269, 270, 271, 272, 273, 274,
++ 275, 276, 277, 278, 279, 280, 281, 282, 283, 284,
++ 285, 286, 287, 288, 289, 290, 291, 292, 293, 123,
++ 125
+ };
++# endif
+
+-static const short yyr2[] = { 0,
+- 2, 0, 2, 0, 2, 2, 2, 2, 2, 2,
+- 2, 0, 4, 0, 3, 0, 2, 4, 2, 1,
+- 1, 1, 1, 1, 3, 0, 2, 1, 3, 0,
+- 2, 1, 3, 0, 2, 1, 3, 0, 2, 1,
+- 3, 0, 2, 2, 4, 1, 1, 1, 1, 1,
+- 2, 2, 2, 2, 2, 1, 1, 2, 1, 1,
+- 2, 0, 1, 1, 1, 1, 1, 1, 1, 1,
+- 1, 2, 0, 3, 1, 1, 1, 1
++/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
++static const unsigned char yyr1[] =
++{
++ 0, 41, 42, 43, 43, 44, 44, 45, 45, 45,
++ 45, 45, 45, 47, 46, 48, 48, 49, 49, 50,
++ 50, 50, 50, 50, 50, 51, 51, 52, 52, 53,
++ 53, 54, 54, 55, 55, 56, 56, 57, 57, 58,
++ 58, 59, 59, 60, 60, 61, 61, 61, 61, 61,
++ 61, 61, 61, 62, 63, 63, 63, 63, 63, 64,
++ 64, 64, 64, 65, 65, 66, 66, 66, 66, 66,
++ 67, 67, 67, 68, 69, 68, 70, 70, 71, 71
+ };
+
+-static const short yydefact[] = { 2,
+- 0, 0, 0, 0, 0, 0, 4, 2, 64, 65,
+- 66, 67, 68, 6, 0, 62, 59, 60, 38, 10,
+- 36, 0, 46, 47, 48, 49, 0, 50, 0, 26,
+- 7, 24, 0, 30, 8, 28, 0, 0, 0, 57,
+- 56, 34, 9, 32, 0, 75, 76, 42, 11, 40,
+- 73, 0, 1, 4, 3, 58, 63, 61, 0, 38,
+- 44, 69, 70, 71, 51, 0, 0, 26, 52, 0,
+- 30, 53, 54, 55, 0, 34, 72, 0, 42, 0,
+- 12, 5, 37, 39, 0, 25, 27, 29, 31, 33,
+- 35, 41, 43, 77, 78, 74, 14, 45, 16, 13,
+- 0, 0, 23, 21, 20, 22, 0, 16, 19, 0,
+- 15, 17, 0, 18, 0, 0, 0
++/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
++static const unsigned char yyr2[] =
++{
++ 0, 2, 2, 0, 2, 0, 2, 2, 2, 2,
++ 2, 2, 2, 0, 4, 0, 3, 0, 2, 4,
++ 2, 1, 1, 1, 1, 1, 3, 0, 2, 1,
++ 3, 0, 2, 1, 3, 0, 2, 1, 3, 0,
++ 2, 1, 3, 0, 2, 2, 4, 1, 1, 1,
++ 1, 1, 2, 2, 2, 2, 2, 1, 1, 2,
++ 1, 1, 2, 0, 1, 1, 1, 1, 1, 1,
++ 1, 1, 1, 2, 0, 3, 1, 1, 1, 1
+ };
+
+-static const short yydefgoto[] = { 115,
+- 7, 53, 8, 54, 97, 100, 107, 108, 31, 67,
+- 35, 70, 43, 75, 20, 59, 49, 78, 68, 71,
+- 76, 60, 58, 14, 65, 79, 80, 51, 96
++/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
++ STATE-NUM when YYTABLE doesn't specify something else to do. Zero
++ means the default is an error. */
++static const unsigned char yydefact[] =
++{
++ 3, 0, 0, 0, 0, 0, 0, 0, 5, 3,
++ 65, 66, 67, 68, 69, 7, 0, 63, 60, 61,
++ 39, 11, 37, 0, 47, 48, 49, 50, 0, 51,
++ 0, 27, 8, 25, 0, 31, 9, 29, 0, 0,
++ 0, 58, 57, 35, 10, 33, 0, 76, 77, 43,
++ 12, 41, 74, 1, 0, 2, 5, 4, 59, 64,
++ 62, 0, 39, 45, 70, 71, 72, 52, 0, 0,
++ 27, 53, 0, 31, 54, 55, 56, 0, 35, 73,
++ 0, 43, 0, 13, 6, 38, 40, 0, 26, 28,
++ 30, 32, 34, 36, 42, 44, 78, 79, 75, 15,
++ 46, 17, 14, 0, 0, 24, 22, 21, 23, 0,
++ 17, 20, 0, 16, 18, 0, 19
+ };
+
+-static const short yypact[] = { 52,
+- 100, 1, -3, -1, -2, 0, -17, 52,-32768,-32768,
+--32768,-32768,-32768,-32768, 100, -18,-32768,-32768, 25,-32768,
+--32768, 100,-32768,-32768,-32768,-32768, 60,-32768, -15, 82,
+--32768,-32768, 100, 14,-32768,-32768, 100, -19, -10,-32768,
+--32768, 20,-32768,-32768, 100,-32768,-32768, 19,-32768,-32768,
+--32768, -14,-32768, -17,-32768,-32768,-32768,-32768, -9, 25,
+--32768,-32768,-32768,-32768,-32768, 8, 2, 82,-32768, 4,
+- 14,-32768,-32768,-32768, 7, 20,-32768, 10, 19, -30,
+--32768,-32768,-32768,-32768, 22,-32768,-32768,-32768,-32768,-32768,
+--32768,-32768,-32768,-32768,-32768,-32768, 21,-32768, 53,-32768,
+- 60, 23,-32768,-32768,-32768,-32768, 24, 53,-32768, 40,
+--32768,-32768, 35,-32768, 67, 69,-32768
++/* YYDEFGOTO[NTERM-NUM]. */
++static const yysigned_char yydefgoto[] =
++{
++ -1, 7, 8, 55, 9, 56, 99, 102, 109, 110,
++ 32, 69, 36, 72, 44, 77, 21, 61, 50, 80,
++ 70, 73, 78, 62, 60, 15, 67, 81, 82, 52,
++ 98
+ };
+
+-static const short yypgoto[] = {-32768,
+- 64, 27,-32768,-32768,-32768,-32768, -35,-32768,-32768, 15,
+--32768, 5,-32768, 12,-32768, 29,-32768, -4, 83, 87,
+- 91, 95,-32768, 26, 9, 92,-32768,-32768,-32768
++/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
++ STATE-NUM. */
++#define YYPACT_NINF -31
++static const yysigned_char yypact[] =
++{
++ 53, 69, 1, -3, -1, -2, 0, 11, -16, 53,
++ -31, -31, -31, -31, -31, -31, 69, -15, -31, -31,
++ 28, -31, -31, 69, -31, -31, -31, -31, 46, -31,
++ -13, 80, -31, -31, 69, 16, -31, -31, 69, -18,
++ -6, -31, -31, 20, -31, -31, 69, -31, -31, 19,
++ -31, -31, -31, -31, -10, -31, -16, -31, -31, -31,
++ -31, 2, 28, -31, -31, -31, -31, -31, 8, 4,
++ 80, -31, 7, 16, -31, -31, -31, 9, 20, -31,
++ 10, 19, -30, -31, -31, -31, -31, 23, -31, -31,
++ -31, -31, -31, -31, -31, -31, -31, -31, -31, 31,
++ -31, 51, -31, 46, 49, -31, -31, -31, -31, 15,
++ 51, -31, 36, -31, -31, 54, -31
+ };
+
+-
+-#define YYLAST 110
+-
+-
+-static const short yytable[] = { 22,
+- 37, 33, 45, 15, 94, 95, 23, 24, 25, 26,
+- 52, 57, 38, 27, 66, 28, 33, 29, 73, 74,
+- 39, 45, 37, 81, 16, 46, 47, 15, 40, 85,
+- 83, 41, 17, 18, 38, 30, 42, 34, 48, 19,
+- 56, 86, 39, 88, 46, 47, 90, 61, 16, 92,
+- 40, 98, 110, 41, 1, 2, 17, 18, 69, 99,
+- 3, 113, 72, 111, 114, 4, 116, 5, 117, 101,
+- 77, 55, 112, 102, 93, 89, 6, 62, 63, 64,
+- 82, 103, 87, 104, 22, 32, 105, 91, 84, 106,
+- 36, 23, 24, 25, 26, 44, 21, 50, 27, 0,
+- 28, 0, 29, 9, 10, 11, 12, 13, 0, 109
++/* YYPGOTO[NTERM-NUM]. */
++static const yysigned_char yypgoto[] =
++{
++ -31, -31, 72, 30, -31, -31, -31, -31, -23, -31,
++ -31, 24, -31, 22, -31, 18, -31, 27, -31, 17,
++ 97, 98, 99, 101, -31, 25, 3, 102, -31, -31,
++ -31
+ };
+
+-static const short yycheck[] = { 3,
+- 3, 3, 3, 3, 35, 36, 10, 11, 12, 13,
+- 28, 30, 15, 17, 30, 19, 3, 21, 38, 30,
+- 23, 3, 3, 38, 24, 26, 27, 3, 31, 22,
+- 40, 34, 32, 33, 15, 39, 39, 39, 39, 39,
+- 15, 40, 23, 40, 26, 27, 40, 22, 24, 40,
+- 31, 30, 30, 34, 3, 4, 32, 33, 33, 39,
+- 9, 22, 37, 40, 30, 14, 0, 16, 0, 17,
+- 45, 8, 108, 21, 79, 71, 25, 18, 19, 20,
+- 54, 29, 68, 31, 3, 3, 34, 76, 60, 37,
+- 4, 10, 11, 12, 13, 5, 2, 6, 17, -1,
+- 19, -1, 21, 4, 5, 6, 7, 8, -1, 101
++/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
++ positive, shift that token. If negative, reduce the rule which
++ number is the opposite. If zero, do what YYDEFACT says.
++ If YYTABLE_NINF, syntax error. */
++#define YYTABLE_NINF -1
++static const unsigned char yytable[] =
++{
++ 23, 38, 34, 46, 16, 96, 97, 24, 25, 26,
++ 27, 53, 54, 39, 28, 59, 29, 68, 30, 34,
++ 75, 40, 46, 38, 76, 17, 47, 48, 83, 41,
++ 87, 16, 42, 18, 19, 39, 31, 43, 35, 49,
++ 20, 58, 85, 40, 88, 47, 48, 90, 63, 92,
++ 94, 41, 17, 100, 42, 113, 1, 2, 115, 71,
++ 18, 19, 3, 74, 64, 65, 66, 4, 103, 5,
++ 101, 79, 104, 10, 11, 12, 13, 14, 6, 112,
++ 105, 57, 106, 23, 116, 107, 84, 114, 108, 86,
++ 24, 25, 26, 27, 89, 91, 93, 28, 95, 29,
++ 33, 30, 37, 22, 45, 0, 111, 0, 51
+ };
+-/* -*-C-*- Note some compilers choke on comments on `#line' lines. */
+-#line 3 "/usr/lib/bison.simple"
+-/* This file comes from bison-1.28. */
+-
+-/* Skeleton output parser for bison,
+- Copyright (C) 1984, 1989, 1990 Free Software Foundation, Inc.
+-
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
+
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
+-
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software
+- Foundation, Inc., 59 Temple Place - Suite 330,
+- Boston, MA 02111-1307, USA. */
+-
+-/* As a special exception, when this file is copied by Bison into a
+- Bison output file, you may use that output file without restriction.
+- This special exception was added by the Free Software Foundation
+- in version 1.24 of Bison. */
++static const yysigned_char yycheck[] =
++{
++ 3, 3, 3, 3, 3, 35, 36, 10, 11, 12,
++ 13, 0, 28, 15, 17, 30, 19, 30, 21, 3,
++ 38, 23, 3, 3, 30, 24, 26, 27, 38, 31,
++ 22, 3, 34, 32, 33, 15, 39, 39, 39, 39,
++ 39, 16, 40, 23, 40, 26, 27, 40, 23, 40,
++ 40, 31, 24, 30, 34, 40, 3, 4, 22, 34,
++ 32, 33, 9, 38, 18, 19, 20, 14, 17, 16,
++ 39, 46, 21, 4, 5, 6, 7, 8, 25, 30,
++ 29, 9, 31, 3, 30, 34, 56, 110, 37, 62,
++ 10, 11, 12, 13, 70, 73, 78, 17, 81, 19,
++ 3, 21, 4, 2, 5, -1, 103, -1, 6
++};
+
+-/* This is the parser code that is written into each bison parser
+- when the %semantic_parser declaration is not specified in the grammar.
+- It was written by Richard Stallman by simplifying the hairy parser
+- used when %semantic_parser is specified. */
+-
+-#ifndef YYSTACK_USE_ALLOCA
+-#ifdef alloca
+-#define YYSTACK_USE_ALLOCA
+-#else /* alloca not defined */
+-#ifdef __GNUC__
+-#define YYSTACK_USE_ALLOCA
+-#define alloca __builtin_alloca
+-#else /* not GNU C. */
+-#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi) || (defined (__sun) && defined (__i386))
+-#define YYSTACK_USE_ALLOCA
+-#include <alloca.h>
+-#else /* not sparc */
+-/* We think this test detects Watcom and Microsoft C. */
+-/* This used to test MSDOS, but that is a bad idea
+- since that symbol is in the user namespace. */
+-#if (defined (_MSDOS) || defined (_MSDOS_)) && !defined (__TURBOC__)
+-#if 0 /* No need for malloc.h, which pollutes the namespace;
+- instead, just don't use alloca. */
+-#include <malloc.h>
+-#endif
+-#else /* not MSDOS, or __TURBOC__ */
+-#if defined(_AIX)
+-/* I don't know what this was needed for, but it pollutes the namespace.
+- So I turned it off. rms, 2 May 1997. */
+-/* #include <malloc.h> */
+- #pragma alloca
+-#define YYSTACK_USE_ALLOCA
+-#else /* not MSDOS, or __TURBOC__, or _AIX */
+-#if 0
+-#ifdef __hpux /* haible@ilog.fr says this works for HPUX 9.05 and up,
+- and on HPUX 10. Eventually we can turn this on. */
+-#define YYSTACK_USE_ALLOCA
+-#define alloca __builtin_alloca
+-#endif /* __hpux */
+-#endif
+-#endif /* not _AIX */
+-#endif /* not MSDOS, or __TURBOC__ */
+-#endif /* not sparc */
+-#endif /* not GNU C */
+-#endif /* alloca not defined */
+-#endif /* YYSTACK_USE_ALLOCA not defined */
++/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
++ symbol of state STATE-NUM. */
++static const unsigned char yystos[] =
++{
++ 0, 3, 4, 9, 14, 16, 25, 42, 43, 45,
++ 4, 5, 6, 7, 8, 66, 3, 24, 32, 33,
++ 39, 57, 64, 3, 10, 11, 12, 13, 17, 19,
++ 21, 39, 51, 61, 3, 39, 53, 62, 3, 15,
++ 23, 31, 34, 39, 55, 63, 3, 26, 27, 39,
++ 59, 68, 70, 0, 28, 44, 46, 43, 66, 30,
++ 65, 58, 64, 66, 18, 19, 20, 67, 30, 52,
++ 61, 66, 54, 62, 66, 38, 30, 56, 63, 66,
++ 60, 68, 69, 38, 44, 40, 58, 22, 40, 52,
++ 40, 54, 40, 56, 40, 60, 35, 36, 71, 47,
++ 30, 39, 48, 17, 21, 29, 31, 34, 37, 49,
++ 50, 67, 30, 40, 49, 22, 30
++};
+
+-#ifdef YYSTACK_USE_ALLOCA
+-#define YYSTACK_ALLOC alloca
+-#else
+-#define YYSTACK_ALLOC malloc
++#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__)
++# define YYSIZE_T __SIZE_TYPE__
++#endif
++#if ! defined (YYSIZE_T) && defined (size_t)
++# define YYSIZE_T size_t
++#endif
++#if ! defined (YYSIZE_T)
++# if defined (__STDC__) || defined (__cplusplus)
++# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
++# define YYSIZE_T size_t
++# endif
++#endif
++#if ! defined (YYSIZE_T)
++# define YYSIZE_T unsigned int
+ #endif
+-
+-/* Note: there must be only one dollar sign in this file.
+- It is replaced by the list of actions, each action
+- as one case of the switch. */
+
+ #define yyerrok (yyerrstatus = 0)
+ #define yyclearin (yychar = YYEMPTY)
+-#define YYEMPTY -2
++#define YYEMPTY (-2)
+ #define YYEOF 0
++
+ #define YYACCEPT goto yyacceptlab
+-#define YYABORT goto yyabortlab
+-#define YYERROR goto yyerrlab1
+-/* Like YYERROR except do call yyerror.
+- This remains here temporarily to ease the
+- transition to the new meaning of YYERROR, for GCC.
++#define YYABORT goto yyabortlab
++#define YYERROR goto yyerrorlab
++
++
++/* Like YYERROR except do call yyerror. This remains here temporarily
++ to ease the transition to the new meaning of YYERROR, for GCC.
+ Once GCC version 2 has supplanted version 1, this can go. */
++
+ #define YYFAIL goto yyerrlab
++
+ #define YYRECOVERING() (!!yyerrstatus)
+-#define YYBACKUP(token, value) \
++
++#define YYBACKUP(Token, Value) \
+ do \
+ if (yychar == YYEMPTY && yylen == 1) \
+- { yychar = (token), yylval = (value); \
+- yychar1 = YYTRANSLATE (yychar); \
++ { \
++ yychar = (Token); \
++ yylval = (Value); \
++ yytoken = YYTRANSLATE (yychar); \
+ YYPOPSTACK; \
+ goto yybackup; \
+ } \
+ else \
+- { yyerror ("syntax error: cannot back up"); YYERROR; } \
++ { \
++ yyerror ("syntax error: cannot back up");\
++ YYERROR; \
++ } \
+ while (0)
+
+ #define YYTERROR 1
+ #define YYERRCODE 256
+
+-#ifndef YYPURE
+-#define YYLEX yylex()
+-#endif
++/* YYLLOC_DEFAULT -- Compute the default location (before the actions
++ are run). */
+
+-#ifdef YYPURE
+-#ifdef YYLSP_NEEDED
+-#ifdef YYLEX_PARAM
+-#define YYLEX yylex(&yylval, &yylloc, YYLEX_PARAM)
+-#else
+-#define YYLEX yylex(&yylval, &yylloc)
++#ifndef YYLLOC_DEFAULT
++# define YYLLOC_DEFAULT(Current, Rhs, N) \
++ ((Current).first_line = (Rhs)[1].first_line, \
++ (Current).first_column = (Rhs)[1].first_column, \
++ (Current).last_line = (Rhs)[N].last_line, \
++ (Current).last_column = (Rhs)[N].last_column)
+ #endif
+-#else /* not YYLSP_NEEDED */
++
++/* YYLEX -- calling `yylex' with the right arguments. */
++
+ #ifdef YYLEX_PARAM
+-#define YYLEX yylex(&yylval, YYLEX_PARAM)
++# define YYLEX yylex (YYLEX_PARAM)
+ #else
+-#define YYLEX yylex(&yylval)
+-#endif
+-#endif /* not YYLSP_NEEDED */
++# define YYLEX yylex ()
+ #endif
+
+-/* If nonreentrant, generate the variables here */
++/* Enable debugging if requested. */
++#if YYDEBUG
+
+-#ifndef YYPURE
++# ifndef YYFPRINTF
++# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
++# define YYFPRINTF fprintf
++# endif
++
++# define YYDPRINTF(Args) \
++do { \
++ if (yydebug) \
++ YYFPRINTF Args; \
++} while (0)
++
++# define YYDSYMPRINT(Args) \
++do { \
++ if (yydebug) \
++ yysymprint Args; \
++} while (0)
++
++# define YYDSYMPRINTF(Title, Token, Value, Location) \
++do { \
++ if (yydebug) \
++ { \
++ YYFPRINTF (stderr, "%s ", Title); \
++ yysymprint (stderr, \
++ Token, Value); \
++ YYFPRINTF (stderr, "\n"); \
++ } \
++} while (0)
+
+-int yychar; /* the lookahead symbol */
+-YYSTYPE yylval; /* the semantic value of the */
+- /* lookahead symbol */
++/*------------------------------------------------------------------.
++| yy_stack_print -- Print the state stack from its BOTTOM up to its |
++| TOP (included). |
++`------------------------------------------------------------------*/
+
+-#ifdef YYLSP_NEEDED
+-YYLTYPE yylloc; /* location data for the lookahead */
+- /* symbol */
++#if defined (__STDC__) || defined (__cplusplus)
++static void
++yy_stack_print (short int *bottom, short int *top)
++#else
++static void
++yy_stack_print (bottom, top)
++ short int *bottom;
++ short int *top;
+ #endif
++{
++ YYFPRINTF (stderr, "Stack now");
++ for (/* Nothing. */; bottom <= top; ++bottom)
++ YYFPRINTF (stderr, " %d", *bottom);
++ YYFPRINTF (stderr, "\n");
++}
++
++# define YY_STACK_PRINT(Bottom, Top) \
++do { \
++ if (yydebug) \
++ yy_stack_print ((Bottom), (Top)); \
++} while (0)
+
+-int yynerrs; /* number of parse errors so far */
+-#endif /* not YYPURE */
+
+-#if YYDEBUG != 0
+-int yydebug; /* nonzero means print parse trace */
+-/* Since this is uninitialized, it does not stop multiple parsers
+- from coexisting. */
++/*------------------------------------------------.
++| Report that the YYRULE is going to be reduced. |
++`------------------------------------------------*/
++
++#if defined (__STDC__) || defined (__cplusplus)
++static void
++yy_reduce_print (int yyrule)
++#else
++static void
++yy_reduce_print (yyrule)
++ int yyrule;
+ #endif
++{
++ int yyi;
++ unsigned int yylno = yyrline[yyrule];
++ YYFPRINTF (stderr, "Reducing stack by rule %d (line %u), ",
++ yyrule - 1, yylno);
++ /* Print the symbols being reduced, and their result. */
++ for (yyi = yyprhs[yyrule]; 0 <= yyrhs[yyi]; yyi++)
++ YYFPRINTF (stderr, "%s ", yytname [yyrhs[yyi]]);
++ YYFPRINTF (stderr, "-> %s\n", yytname [yyr1[yyrule]]);
++}
++
++# define YY_REDUCE_PRINT(Rule) \
++do { \
++ if (yydebug) \
++ yy_reduce_print (Rule); \
++} while (0)
++
++/* Nonzero means print parse trace. It is left uninitialized so that
++ multiple parsers can coexist. */
++int yydebug;
++#else /* !YYDEBUG */
++# define YYDPRINTF(Args)
++# define YYDSYMPRINT(Args)
++# define YYDSYMPRINTF(Title, Token, Value, Location)
++# define YY_STACK_PRINT(Bottom, Top)
++# define YY_REDUCE_PRINT(Rule)
++#endif /* !YYDEBUG */
+
+-/* YYINITDEPTH indicates the initial size of the parser's stacks */
+
++/* YYINITDEPTH -- initial size of the parser's stacks. */
+ #ifndef YYINITDEPTH
+-#define YYINITDEPTH 200
++# define YYINITDEPTH 200
+ #endif
+
+-/* YYMAXDEPTH is the maximum size the stacks can grow to
+- (effective only if the built-in stack extension method is used). */
++/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
++ if the built-in stack extension method is used).
+
+-#if YYMAXDEPTH == 0
+-#undef YYMAXDEPTH
++ Do not make this value too large; the results are undefined if
++ SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH)
++ evaluated with infinite-precision integer arithmetic. */
++
++#if defined (YYMAXDEPTH) && YYMAXDEPTH == 0
++# undef YYMAXDEPTH
+ #endif
+
+ #ifndef YYMAXDEPTH
+-#define YYMAXDEPTH 10000
++# define YYMAXDEPTH 10000
+ #endif
++
+ \f
+-/* Define __yy_memcpy. Note that the size argument
+- should be passed with type unsigned int, because that is what the non-GCC
+- definitions require. With GCC, __builtin_memcpy takes an arg
+- of type size_t, but it can handle unsigned int. */
+-
+-#if __GNUC__ > 1 /* GNU C and GNU C++ define this. */
+-#define __yy_memcpy(TO,FROM,COUNT) __builtin_memcpy(TO,FROM,COUNT)
+-#else /* not GNU C or C++ */
+-#ifndef __cplusplus
+
+-/* This is the most reliable way to avoid incompatibilities
+- in available built-in functions on various systems. */
+-static void
+-__yy_memcpy (to, from, count)
+- char *to;
+- char *from;
+- unsigned int count;
+-{
+- register char *f = from;
+- register char *t = to;
+- register int i = count;
++#if YYERROR_VERBOSE
+
+- while (i-- > 0)
+- *t++ = *f++;
++# ifndef yystrlen
++# if defined (__GLIBC__) && defined (_STRING_H)
++# define yystrlen strlen
++# else
++/* Return the length of YYSTR. */
++static YYSIZE_T
++# if defined (__STDC__) || defined (__cplusplus)
++yystrlen (const char *yystr)
++# else
++yystrlen (yystr)
++ const char *yystr;
++# endif
++{
++ register const char *yys = yystr;
++
++ while (*yys++ != '\0')
++ continue;
++
++ return yys - yystr - 1;
+ }
++# endif
++# endif
+
+-#else /* __cplusplus */
++# ifndef yystpcpy
++# if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE)
++# define yystpcpy stpcpy
++# else
++/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
++ YYDEST. */
++static char *
++# if defined (__STDC__) || defined (__cplusplus)
++yystpcpy (char *yydest, const char *yysrc)
++# else
++yystpcpy (yydest, yysrc)
++ char *yydest;
++ const char *yysrc;
++# endif
++{
++ register char *yyd = yydest;
++ register const char *yys = yysrc;
++
++ while ((*yyd++ = *yys++) != '\0')
++ continue;
++
++ return yyd - 1;
++}
++# endif
++# endif
+
+-/* This is the most reliable way to avoid incompatibilities
+- in available built-in functions on various systems. */
++#endif /* !YYERROR_VERBOSE */
++
++\f
++
++#if YYDEBUG
++/*--------------------------------.
++| Print this symbol on YYOUTPUT. |
++`--------------------------------*/
++
++#if defined (__STDC__) || defined (__cplusplus)
+ static void
+-__yy_memcpy (char *to, char *from, unsigned int count)
++yysymprint (FILE *yyoutput, int yytype, YYSTYPE *yyvaluep)
++#else
++static void
++yysymprint (yyoutput, yytype, yyvaluep)
++ FILE *yyoutput;
++ int yytype;
++ YYSTYPE *yyvaluep;
++#endif
+ {
+- register char *t = to;
+- register char *f = from;
+- register int i = count;
++ /* Pacify ``unused variable'' warnings. */
++ (void) yyvaluep;
+
+- while (i-- > 0)
+- *t++ = *f++;
++ if (yytype < YYNTOKENS)
++ {
++ YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
++# ifdef YYPRINT
++ YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
++# endif
++ }
++ else
++ YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
++
++ switch (yytype)
++ {
++ default:
++ break;
++ }
++ YYFPRINTF (yyoutput, ")");
+ }
+
++#endif /* ! YYDEBUG */
++/*-----------------------------------------------.
++| Release the memory associated to this symbol. |
++`-----------------------------------------------*/
++
++#if defined (__STDC__) || defined (__cplusplus)
++static void
++yydestruct (int yytype, YYSTYPE *yyvaluep)
++#else
++static void
++yydestruct (yytype, yyvaluep)
++ int yytype;
++ YYSTYPE *yyvaluep;
+ #endif
+-#endif
++{
++ /* Pacify ``unused variable'' warnings. */
++ (void) yyvaluep;
++
++ switch (yytype)
++ {
++
++ default:
++ break;
++ }
++}
+ \f
+-#line 217 "/usr/lib/bison.simple"
+
+-/* The user can define YYPARSE_PARAM as the name of an argument to be passed
+- into yyparse. The argument should have type void *.
+- It should actually point to an object.
+- Grammar actions can access the variable by casting it
+- to the proper pointer type. */
++/* Prevent warnings from -Wmissing-prototypes. */
+
+ #ifdef YYPARSE_PARAM
+-#ifdef __cplusplus
+-#define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
+-#define YYPARSE_PARAM_DECL
+-#else /* not __cplusplus */
+-#define YYPARSE_PARAM_ARG YYPARSE_PARAM
+-#define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
+-#endif /* not __cplusplus */
+-#else /* not YYPARSE_PARAM */
+-#define YYPARSE_PARAM_ARG
+-#define YYPARSE_PARAM_DECL
+-#endif /* not YYPARSE_PARAM */
++# if defined (__STDC__) || defined (__cplusplus)
++int yyparse (void *YYPARSE_PARAM);
++# else
++int yyparse ();
++# endif
++#else /* ! YYPARSE_PARAM */
++#if defined (__STDC__) || defined (__cplusplus)
++int yyparse (void);
++#else
++int yyparse ();
++#endif
++#endif /* ! YYPARSE_PARAM */
++
++
++
++/* The lookahead symbol. */
++int yychar;
++
++/* The semantic value of the lookahead symbol. */
++YYSTYPE yylval;
++
++/* Number of syntax errors so far. */
++int yynerrs;
++
++
++
++/*----------.
++| yyparse. |
++`----------*/
+
+-/* Prevent warning if -Wstrict-prototypes. */
+-#ifdef __GNUC__
+ #ifdef YYPARSE_PARAM
+-int yyparse (void *);
++# if defined (__STDC__) || defined (__cplusplus)
++int yyparse (void *YYPARSE_PARAM)
++# else
++int yyparse (YYPARSE_PARAM)
++ void *YYPARSE_PARAM;
++# endif
++#else /* ! YYPARSE_PARAM */
++#if defined (__STDC__) || defined (__cplusplus)
++int
++yyparse (void)
+ #else
+-int yyparse (void);
++int
++yyparse ()
++
+ #endif
+ #endif
+-
+-int
+-yyparse(YYPARSE_PARAM_ARG)
+- YYPARSE_PARAM_DECL
+ {
++
+ register int yystate;
+ register int yyn;
+- register short *yyssp;
++ int yyresult;
++ /* Number of tokens to shift before error messages enabled. */
++ int yyerrstatus;
++ /* Lookahead token as an internal (translated) token number. */
++ int yytoken = 0;
++
++ /* Three stacks and their tools:
++ `yyss': related to states,
++ `yyvs': related to semantic values,
++ `yyls': related to locations.
++
++ Refer to the stacks thru separate pointers, to allow yyoverflow
++ to reallocate them elsewhere. */
++
++ /* The state stack. */
++ short int yyssa[YYINITDEPTH];
++ short int *yyss = yyssa;
++ register short int *yyssp;
++
++ /* The semantic value stack. */
++ YYSTYPE yyvsa[YYINITDEPTH];
++ YYSTYPE *yyvs = yyvsa;
+ register YYSTYPE *yyvsp;
+- int yyerrstatus; /* number of tokens to shift before error messages enabled */
+- int yychar1 = 0; /* lookahead token as an internal (translated) token number */
+
+- short yyssa[YYINITDEPTH]; /* the state stack */
+- YYSTYPE yyvsa[YYINITDEPTH]; /* the semantic value stack */
+
+- short *yyss = yyssa; /* refer to the stacks thru separate pointers */
+- YYSTYPE *yyvs = yyvsa; /* to allow yyoverflow to reallocate them elsewhere */
+
+-#ifdef YYLSP_NEEDED
+- YYLTYPE yylsa[YYINITDEPTH]; /* the location stack */
+- YYLTYPE *yyls = yylsa;
+- YYLTYPE *yylsp;
+-
+-#define YYPOPSTACK (yyvsp--, yyssp--, yylsp--)
+-#else
+ #define YYPOPSTACK (yyvsp--, yyssp--)
+-#endif
+
+- int yystacksize = YYINITDEPTH;
+- int yyfree_stacks = 0;
++ YYSIZE_T yystacksize = YYINITDEPTH;
+
+-#ifdef YYPURE
+- int yychar;
+- YYSTYPE yylval;
+- int yynerrs;
+-#ifdef YYLSP_NEEDED
+- YYLTYPE yylloc;
+-#endif
+-#endif
++ /* The variables used to return semantic value and location from the
++ action routines. */
++ YYSTYPE yyval;
+
+- YYSTYPE yyval; /* the variable used to return */
+- /* semantic values from the action */
+- /* routines */
+
++ /* When reducing, the number of symbols on the RHS of the reduced
++ rule. */
+ int yylen;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Starting parse\n");
+-#endif
++ YYDPRINTF ((stderr, "Starting parse\n"));
+
+ yystate = 0;
+ yyerrstatus = 0;
+@@ -614,110 +1022,97 @@
+ so that they stay on the same level as the state stack.
+ The wasted elements are never initialized. */
+
+- yyssp = yyss - 1;
++ yyssp = yyss;
+ yyvsp = yyvs;
+-#ifdef YYLSP_NEEDED
+- yylsp = yyls;
+-#endif
+
+-/* Push a new state, which is found in yystate . */
+-/* In all cases, when you get here, the value and location stacks
+- have just been pushed. so pushing a state here evens the stacks. */
+-yynewstate:
+
+- *++yyssp = yystate;
++ goto yysetstate;
+
+- if (yyssp >= yyss + yystacksize - 1)
+- {
+- /* Give user a chance to reallocate the stack */
+- /* Use copies of these so that the &'s don't force the real ones into memory. */
+- YYSTYPE *yyvs1 = yyvs;
+- short *yyss1 = yyss;
+-#ifdef YYLSP_NEEDED
+- YYLTYPE *yyls1 = yyls;
+-#endif
++/*------------------------------------------------------------.
++| yynewstate -- Push a new state, which is found in yystate. |
++`------------------------------------------------------------*/
++ yynewstate:
++ /* In all cases, when you get here, the value and location stacks
++ have just been pushed. so pushing a state here evens the stacks.
++ */
++ yyssp++;
+
++ yysetstate:
++ *yyssp = yystate;
++
++ if (yyss + yystacksize - 1 <= yyssp)
++ {
+ /* Get the current used size of the three stacks, in elements. */
+- int size = yyssp - yyss + 1;
++ YYSIZE_T yysize = yyssp - yyss + 1;
+
+ #ifdef yyoverflow
+- /* Each stack pointer address is followed by the size of
+- the data in use in that stack, in bytes. */
+-#ifdef YYLSP_NEEDED
+- /* This used to be a conditional around just the two extra args,
+- but that might be undefined if yyoverflow is a macro. */
+- yyoverflow("parser stack overflow",
+- &yyss1, size * sizeof (*yyssp),
+- &yyvs1, size * sizeof (*yyvsp),
+- &yyls1, size * sizeof (*yylsp),
+- &yystacksize);
+-#else
+- yyoverflow("parser stack overflow",
+- &yyss1, size * sizeof (*yyssp),
+- &yyvs1, size * sizeof (*yyvsp),
+- &yystacksize);
+-#endif
+-
+- yyss = yyss1; yyvs = yyvs1;
+-#ifdef YYLSP_NEEDED
+- yyls = yyls1;
+-#endif
++ {
++ /* Give user a chance to reallocate the stack. Use copies of
++ these so that the &'s don't force the real ones into
++ memory. */
++ YYSTYPE *yyvs1 = yyvs;
++ short int *yyss1 = yyss;
++
++
++ /* Each stack pointer address is followed by the size of the
++ data in use in that stack, in bytes. This used to be a
++ conditional around just the two extra args, but that might
++ be undefined if yyoverflow is a macro. */
++ yyoverflow ("parser stack overflow",
++ &yyss1, yysize * sizeof (*yyssp),
++ &yyvs1, yysize * sizeof (*yyvsp),
++
++ &yystacksize);
++
++ yyss = yyss1;
++ yyvs = yyvs1;
++ }
+ #else /* no yyoverflow */
++# ifndef YYSTACK_RELOCATE
++ goto yyoverflowlab;
++# else
+ /* Extend the stack our own way. */
+- if (yystacksize >= YYMAXDEPTH)
+- {
+- yyerror("parser stack overflow");
+- if (yyfree_stacks)
+- {
+- free (yyss);
+- free (yyvs);
+-#ifdef YYLSP_NEEDED
+- free (yyls);
+-#endif
+- }
+- return 2;
+- }
++ if (YYMAXDEPTH <= yystacksize)
++ goto yyoverflowlab;
+ yystacksize *= 2;
+- if (yystacksize > YYMAXDEPTH)
++ if (YYMAXDEPTH < yystacksize)
+ yystacksize = YYMAXDEPTH;
+-#ifndef YYSTACK_USE_ALLOCA
+- yyfree_stacks = 1;
+-#endif
+- yyss = (short *) YYSTACK_ALLOC (yystacksize * sizeof (*yyssp));
+- __yy_memcpy ((char *)yyss, (char *)yyss1,
+- size * (unsigned int) sizeof (*yyssp));
+- yyvs = (YYSTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yyvsp));
+- __yy_memcpy ((char *)yyvs, (char *)yyvs1,
+- size * (unsigned int) sizeof (*yyvsp));
+-#ifdef YYLSP_NEEDED
+- yyls = (YYLTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yylsp));
+- __yy_memcpy ((char *)yyls, (char *)yyls1,
+- size * (unsigned int) sizeof (*yylsp));
+-#endif
++
++ {
++ short int *yyss1 = yyss;
++ union yyalloc *yyptr =
++ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
++ if (! yyptr)
++ goto yyoverflowlab;
++ YYSTACK_RELOCATE (yyss);
++ YYSTACK_RELOCATE (yyvs);
++
++# undef YYSTACK_RELOCATE
++ if (yyss1 != yyssa)
++ YYSTACK_FREE (yyss1);
++ }
++# endif
+ #endif /* no yyoverflow */
+
+- yyssp = yyss + size - 1;
+- yyvsp = yyvs + size - 1;
+-#ifdef YYLSP_NEEDED
+- yylsp = yyls + size - 1;
+-#endif
++ yyssp = yyss + yysize - 1;
++ yyvsp = yyvs + yysize - 1;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Stack size increased to %d\n", yystacksize);
+-#endif
+
+- if (yyssp >= yyss + yystacksize - 1)
++ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
++ (unsigned long int) yystacksize));
++
++ if (yyss + yystacksize - 1 <= yyssp)
+ YYABORT;
+ }
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Entering state %d\n", yystate);
+-#endif
++ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+
+ goto yybackup;
+- yybackup:
++
++/*-----------.
++| yybackup. |
++`-----------*/
++yybackup:
+
+ /* Do appropriate processing given the current state. */
+ /* Read a lookahead token if we need one and don't already have one. */
+@@ -726,135 +1121,99 @@
+ /* First try to decide what to do without reference to lookahead token. */
+
+ yyn = yypact[yystate];
+- if (yyn == YYFLAG)
++ if (yyn == YYPACT_NINF)
+ goto yydefault;
+
+ /* Not known => get a lookahead token if don't already have one. */
+
+- /* yychar is either YYEMPTY or YYEOF
+- or a valid token in external form. */
+-
++ /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
+ if (yychar == YYEMPTY)
+ {
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Reading a token: ");
+-#endif
++ YYDPRINTF ((stderr, "Reading a token: "));
+ yychar = YYLEX;
+ }
+
+- /* Convert token to internal form (in yychar1) for indexing tables with */
+-
+- if (yychar <= 0) /* This means end of input. */
++ if (yychar <= YYEOF)
+ {
+- yychar1 = 0;
+- yychar = YYEOF; /* Don't call YYLEX any more */
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Now at end of input.\n");
+-#endif
++ yychar = yytoken = YYEOF;
++ YYDPRINTF ((stderr, "Now at end of input.\n"));
+ }
+ else
+ {
+- yychar1 = YYTRANSLATE(yychar);
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- fprintf (stderr, "Next token is %d (%s", yychar, yytname[yychar1]);
+- /* Give the individual parser a way to print the precise meaning
+- of a token, for further debugging info. */
+-#ifdef YYPRINT
+- YYPRINT (stderr, yychar, yylval);
+-#endif
+- fprintf (stderr, ")\n");
+- }
+-#endif
++ yytoken = YYTRANSLATE (yychar);
++ YYDSYMPRINTF ("Next token is", yytoken, &yylval, &yylloc);
+ }
+
+- yyn += yychar1;
+- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
++ /* If the proper action on seeing token YYTOKEN is to reduce or to
++ detect an error, take that action. */
++ yyn += yytoken;
++ if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
+ goto yydefault;
+-
+ yyn = yytable[yyn];
+-
+- /* yyn is what to do for this token type in this state.
+- Negative => reduce, -yyn is rule number.
+- Positive => shift, yyn is new state.
+- New state is final state => don't bother to shift,
+- just return success.
+- 0, or most negative number => error. */
+-
+- if (yyn < 0)
++ if (yyn <= 0)
+ {
+- if (yyn == YYFLAG)
++ if (yyn == 0 || yyn == YYTABLE_NINF)
+ goto yyerrlab;
+ yyn = -yyn;
+ goto yyreduce;
+ }
+- else if (yyn == 0)
+- goto yyerrlab;
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ /* Shift the lookahead token. */
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]);
+-#endif
++ YYDPRINTF ((stderr, "Shifting token %s, ", yytname[yytoken]));
+
+ /* Discard the token being shifted unless it is eof. */
+ if (yychar != YYEOF)
+ yychar = YYEMPTY;
+
+ *++yyvsp = yylval;
+-#ifdef YYLSP_NEEDED
+- *++yylsp = yylloc;
+-#endif
+
+- /* count tokens shifted since error; after three, turn off error status. */
+- if (yyerrstatus) yyerrstatus--;
++
++ /* Count tokens shifted since error; after three, turn off error
++ status. */
++ if (yyerrstatus)
++ yyerrstatus--;
+
+ yystate = yyn;
+ goto yynewstate;
+
+-/* Do the default action for the current state. */
+-yydefault:
+
++/*-----------------------------------------------------------.
++| yydefault -- do the default action for the current state. |
++`-----------------------------------------------------------*/
++yydefault:
+ yyn = yydefact[yystate];
+ if (yyn == 0)
+ goto yyerrlab;
++ goto yyreduce;
++
+
+-/* Do a reduction. yyn is the number of a rule to reduce with. */
++/*-----------------------------.
++| yyreduce -- Do a reduction. |
++`-----------------------------*/
+ yyreduce:
++ /* yyn is the number of a rule to reduce with. */
+ yylen = yyr2[yyn];
+- if (yylen > 0)
+- yyval = yyvsp[1-yylen]; /* implement default value of the action */
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- int i;
+-
+- fprintf (stderr, "Reducing via rule %d (line %d), ",
+- yyn, yyrline[yyn]);
++ /* If YYLEN is nonzero, implement the default value of the action:
++ `$$ = $1'.
+
+- /* Print the symbols being reduced, and their result. */
+- for (i = yyprhs[yyn]; yyrhs[i] > 0; i++)
+- fprintf (stderr, "%s ", yytname[yyrhs[i]]);
+- fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]);
+- }
+-#endif
++ Otherwise, the following line sets YYVAL to garbage.
++ This behavior is undocumented and Bison
++ users should not rely upon it. Assigning to YYVAL
++ unconditionally makes the parser a bit smaller, and it avoids a
++ GCC warning that YYVAL may be used uninitialized. */
++ yyval = yyvsp[1-yylen];
+
+
+- switch (yyn) {
+-
+-case 5:
+-#line 83 "cfg_y.y"
+-{
++ YY_REDUCE_PRINT (yyn);
++ switch (yyn)
++ {
++ case 6:
++#line 86 "cfg_y.y"
++ {
+ if (!curr_sig->uni)
+ curr_sig->uni =
+ #if defined(UNI30) || defined(DYNAMIC_UNI)
+@@ -873,17 +1232,19 @@
+ #endif
+ #endif
+ ;
+- ;
+- break;}
+-case 6:
+-#line 107 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 7:
++#line 110 "cfg_y.y"
++ {
+ set_verbosity(NULL,yyvsp[0].num);
+- ;
+- break;}
+-case 12:
+-#line 119 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 13:
++#line 122 "cfg_y.y"
++ {
+ SIG_ENTITY *sig,**walk;
+
+ if (atmpvc_addr_in_use(_entity.signaling_pvc))
+@@ -892,37 +1253,49 @@
+ if (entities == &_entity) entities = NULL;
+ for (sig = entities; sig; sig = sig->next)
+ if (atm_equal((struct sockaddr *) &sig->signaling_pvc,
+- (struct sockaddr *) &yyvsp[0].pvc,0,0))
+- yyerror("duplicate PVC address %d.%d.%d",S_PVC(sig));
++ (struct sockaddr *) &yyvsp[0].pvc,0,0)) {
++ const char *err;
++ asprintf(&err,"duplicate PVC address %d.%d.%d",S_PVC(sig));
++ if(err) {
++ yyerror(err);
++ free(err);
++ }
++ else
++ yyerror("duplicate PVC address");
++ }
+ curr_sig = alloc_t(SIG_ENTITY);
+ *curr_sig = _entity;
+ curr_sig->signaling_pvc = yyvsp[0].pvc;
+ curr_sig->next = NULL;
+ for (walk = &entities; *walk; walk = &(*walk)->next);
+ *walk = curr_sig;
+- ;
+- break;}
+-case 18:
+-#line 150 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 19:
++#line 161 "cfg_y.y"
++ {
+ enter_vpci(curr_sig,yyvsp[-2].num,yyvsp[0].num);
+- ;
+- break;}
+-case 20:
+-#line 155 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 21:
++#line 166 "cfg_y.y"
++ {
+ curr_sig->sig_qos = yyvsp[0].str;
+- ;
+- break;}
+-case 21:
+-#line 159 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 22:
++#line 170 "cfg_y.y"
++ {
+ curr_sig->max_rate = yyvsp[0].num;
+- ;
+- break;}
+-case 22:
+-#line 163 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 23:
++#line 174 "cfg_y.y"
++ {
+ struct sockaddr_atmsvc addr;
+ char *mask;
+
+@@ -931,464 +1304,506 @@
+ if (text2atm(yyvsp[0].str,(struct sockaddr *) &addr,sizeof(addr),
+ T2A_SVC | T2A_WILDCARD | T2A_NAME | T2A_LOCAL) < 0) {
+ yyerror("invalid address");
+- return;
++ return 0;
+ }
+ add_route(curr_sig,&addr,mask ? strtol(mask,NULL,10) : INT_MAX);
+- ;
+- break;}
+-case 23:
+-#line 177 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 24:
++#line 188 "cfg_y.y"
++ {
+ add_route(curr_sig,NULL,0);
+- ;
+- break;}
+-case 44:
+-#line 229 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 45:
++#line 240 "cfg_y.y"
++ {
+ set_verbosity("UNI",yyvsp[0].num);
+ set_verbosity("KERNEL",yyvsp[0].num);
+ set_verbosity("SAP",yyvsp[0].num);
+- ;
+- break;}
+-case 45:
+-#line 235 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 46:
++#line 246 "cfg_y.y"
++ {
+ enter_vpci(curr_sig,yyvsp[-2].num,yyvsp[0].num);
+- ;
+- break;}
+-case 46:
+-#line 239 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 47:
++#line 250 "cfg_y.y"
++ {
+ #if defined(UNI30) || defined(ALLOW_UNI30) || defined(DYNAMIC_UNI)
+ if (curr_sig->uni & ~S_UNI31) yyerror("UNI mode is already set");
+ curr_sig->uni |= S_UNI30;
+ #else
+ yyerror("Sorry, not supported yet");
+ #endif
+- ;
+- break;}
+-case 47:
+-#line 248 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 48:
++#line 259 "cfg_y.y"
++ {
+ #if defined(UNI31) || defined(ALLOW_UNI30) || defined(DYNAMIC_UNI)
+ if (curr_sig->uni & ~S_UNI30) yyerror("UNI mode is already set");
+ curr_sig->uni |= S_UNI31;
+ #else
+ yyerror("Sorry, not supported yet");
+ #endif
+- ;
+- break;}
+-case 48:
+-#line 257 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 49:
++#line 268 "cfg_y.y"
++ {
+ #if defined(UNI40) || defined(DYNAMIC_UNI)
+ if (curr_sig->uni) yyerror("UNI mode is already set");
+ curr_sig->uni = S_UNI40;
+ #else
+ yyerror("Sorry, not supported yet");
+ #endif
+- ;
+- break;}
+-case 49:
+-#line 266 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 50:
++#line 277 "cfg_y.y"
++ {
+ #if defined(Q2963_1) || defined(DYNAMIC_UNI)
+ if (!(curr_sig->uni & S_UNI40)) yyerror("Incompatible UNI mode");
+ curr_sig->uni |= S_Q2963_1;
+ #else
+ yyerror("Sorry, not supported yet");
+ #endif
+- ;
+- break;}
+-case 50:
+-#line 275 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 51:
++#line 286 "cfg_y.y"
++ {
+ yywarn("sig net is obsolete, please use sig mode net instead");
+ curr_sig->mode = sm_net;
+- ;
+- break;}
+-case 52:
+-#line 284 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 53:
++#line 295 "cfg_y.y"
++ {
+ set_verbosity("SSCF",yyvsp[0].num);
+ set_verbosity("SSCOP",yyvsp[0].num);
+- ;
+- break;}
+-case 53:
+-#line 292 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 54:
++#line 303 "cfg_y.y"
++ {
+ set_verbosity("IO",yyvsp[0].num);
+- ;
+- break;}
+-case 54:
+-#line 296 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 55:
++#line 307 "cfg_y.y"
++ {
+ curr_sig->signaling_pvc = yyvsp[0].pvc;
+- ;
+- break;}
+-case 55:
+-#line 300 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 56:
++#line 311 "cfg_y.y"
++ {
+ yywarn("io pcr is obsolete, please use io qos instead");
+ curr_sig->sig_pcr = yyvsp[0].num;
+- ;
+- break;}
+-case 56:
+-#line 305 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 57:
++#line 316 "cfg_y.y"
++ {
+ curr_sig->sig_qos = yyvsp[0].str;
+- ;
+- break;}
+-case 57:
+-#line 309 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 58:
++#line 320 "cfg_y.y"
++ {
+ curr_sig->max_rate = yyvsp[0].num;
+- ;
+- break;}
+-case 58:
+-#line 316 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 59:
++#line 327 "cfg_y.y"
++ {
+ set_verbosity(NULL,yyvsp[0].num);
+- ;
+- break;}
+-case 59:
+-#line 320 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 60:
++#line 331 "cfg_y.y"
++ {
+ dump_dir = yyvsp[0].str;
+ if (!trace_size) trace_size = DEFAULT_TRACE_SIZE;
+- ;
+- break;}
+-case 60:
+-#line 325 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 61:
++#line 336 "cfg_y.y"
++ {
+ set_logfile(yyvsp[0].str);
+- ;
+- break;}
+-case 61:
+-#line 329 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 62:
++#line 340 "cfg_y.y"
++ {
+ trace_size = yyvsp[0].num;
+- ;
+- break;}
+-case 62:
+-#line 335 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 63:
++#line 346 "cfg_y.y"
++ {
+ yyval.num = DEFAULT_TRACE_SIZE;
+- ;
+- break;}
+-case 63:
+-#line 339 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 64:
++#line 350 "cfg_y.y"
++ {
+ yyval.num = yyvsp[0].num;
+- ;
+- break;}
+-case 64:
+-#line 346 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 65:
++#line 357 "cfg_y.y"
++ {
+ yyval.num = DIAG_DEBUG;
+- ;
+- break;}
+-case 65:
+-#line 350 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 66:
++#line 361 "cfg_y.y"
++ {
+ yyval.num = DIAG_INFO;
+- ;
+- break;}
+-case 66:
+-#line 354 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 67:
++#line 365 "cfg_y.y"
++ {
+ yyval.num = DIAG_WARN;
+- ;
+- break;}
+-case 67:
+-#line 358 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 68:
++#line 369 "cfg_y.y"
++ {
+ yyval.num = DIAG_ERROR;
+- ;
+- break;}
+-case 68:
+-#line 362 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 69:
++#line 373 "cfg_y.y"
++ {
+ yyval.num = DIAG_FATAL;
+- ;
+- break;}
+-case 69:
+-#line 369 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 70:
++#line 380 "cfg_y.y"
++ {
+ curr_sig->mode = sm_user;
+- ;
+- break;}
+-case 70:
+-#line 373 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 71:
++#line 384 "cfg_y.y"
++ {
+ curr_sig->mode = sm_net;
+- ;
+- break;}
+-case 71:
+-#line 377 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 72:
++#line 388 "cfg_y.y"
++ {
+ curr_sig->mode = sm_switch;
+- ;
+- break;}
+-case 72:
+-#line 384 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 73:
++#line 395 "cfg_y.y"
++ {
+ set_verbosity("POLICY",yyvsp[0].num);
+- ;
+- break;}
+-case 73:
+-#line 388 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 74:
++#line 399 "cfg_y.y"
++ {
+ rule = alloc_t(RULE);
+ rule->type = yyvsp[0].num;
+- ;
+- break;}
+-case 75:
+-#line 397 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 76:
++#line 408 "cfg_y.y"
++ {
+ yyval.num = ACL_ALLOW;
+- ;
+- break;}
+-case 76:
+-#line 401 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 77:
++#line 412 "cfg_y.y"
++ {
+ yyval.num = ACL_REJECT;
+- ;
+- break;}
+-case 77:
+-#line 408 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 78:
++#line 419 "cfg_y.y"
++ {
+ rule->type |= ACL_IN;
+ put_address(yyvsp[0].str);
+- ;
+- break;}
+-case 78:
+-#line 413 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 79:
++#line 424 "cfg_y.y"
++ {
+ rule->type |= ACL_OUT;
+ put_address(yyvsp[0].str);
+- ;
+- break;}
+-}
+- /* the action file gets copied in in place of this dollarsign */
+-#line 543 "/usr/lib/bison.simple"
++ }
++ break;
++
++
++ }
++
++/* Line 1010 of yacc.c. */
++#line 1585 "y.tab.c"
+ \f
+ yyvsp -= yylen;
+ yyssp -= yylen;
+-#ifdef YYLSP_NEEDED
+- yylsp -= yylen;
+-#endif
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- short *ssp1 = yyss - 1;
+- fprintf (stderr, "state stack now");
+- while (ssp1 != yyssp)
+- fprintf (stderr, " %d", *++ssp1);
+- fprintf (stderr, "\n");
+- }
+-#endif
++
++ YY_STACK_PRINT (yyss, yyssp);
+
+ *++yyvsp = yyval;
+
+-#ifdef YYLSP_NEEDED
+- yylsp++;
+- if (yylen == 0)
+- {
+- yylsp->first_line = yylloc.first_line;
+- yylsp->first_column = yylloc.first_column;
+- yylsp->last_line = (yylsp-1)->last_line;
+- yylsp->last_column = (yylsp-1)->last_column;
+- yylsp->text = 0;
+- }
+- else
+- {
+- yylsp->last_line = (yylsp+yylen-1)->last_line;
+- yylsp->last_column = (yylsp+yylen-1)->last_column;
+- }
+-#endif
+
+- /* Now "shift" the result of the reduction.
+- Determine what state that goes to,
+- based on the state we popped back to
+- and the rule number reduced by. */
++ /* Now `shift' the result of the reduction. Determine what state
++ that goes to, based on the state we popped back to and the rule
++ number reduced by. */
+
+ yyn = yyr1[yyn];
+
+- yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
+- if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
++ yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
++ if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
+ yystate = yytable[yystate];
+ else
+- yystate = yydefgoto[yyn - YYNTBASE];
++ yystate = yydefgoto[yyn - YYNTOKENS];
+
+ goto yynewstate;
+
+-yyerrlab: /* here on detecting error */
+
+- if (! yyerrstatus)
+- /* If not already recovering from an error, report this error. */
++/*------------------------------------.
++| yyerrlab -- here on detecting error |
++`------------------------------------*/
++yyerrlab:
++ /* If not already recovering from an error, report this error. */
++ if (!yyerrstatus)
+ {
+ ++yynerrs;
+-
+-#ifdef YYERROR_VERBOSE
++#if YYERROR_VERBOSE
+ yyn = yypact[yystate];
+
+- if (yyn > YYFLAG && yyn < YYLAST)
++ if (YYPACT_NINF < yyn && yyn < YYLAST)
+ {
+- int size = 0;
+- char *msg;
+- int x, count;
+-
+- count = 0;
+- /* Start X at -yyn if nec to avoid negative indexes in yycheck. */
+- for (x = (yyn < 0 ? -yyn : 0);
+- x < (sizeof(yytname) / sizeof(char *)); x++)
+- if (yycheck[x + yyn] == x)
+- size += strlen(yytname[x]) + 15, count++;
+- msg = (char *) malloc(size + 15);
+- if (msg != 0)
++ YYSIZE_T yysize = 0;
++ int yytype = YYTRANSLATE (yychar);
++ const char* yyprefix;
++ char *yymsg;
++ int yyx;
++
++ /* Start YYX at -YYN if negative to avoid negative indexes in
++ YYCHECK. */
++ int yyxbegin = yyn < 0 ? -yyn : 0;
++
++ /* Stay within bounds of both yycheck and yytname. */
++ int yychecklim = YYLAST - yyn;
++ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
++ int yycount = 0;
++
++ yyprefix = ", expecting ";
++ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
++ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
++ {
++ yysize += yystrlen (yyprefix) + yystrlen (yytname [yyx]);
++ yycount += 1;
++ if (yycount == 5)
++ {
++ yysize = 0;
++ break;
++ }
++ }
++ yysize += (sizeof ("syntax error, unexpected ")
++ + yystrlen (yytname[yytype]));
++ yymsg = (char *) YYSTACK_ALLOC (yysize);
++ if (yymsg != 0)
+ {
+- strcpy(msg, "parse error");
++ char *yyp = yystpcpy (yymsg, "syntax error, unexpected ");
++ yyp = yystpcpy (yyp, yytname[yytype]);
+
+- if (count < 5)
++ if (yycount < 5)
+ {
+- count = 0;
+- for (x = (yyn < 0 ? -yyn : 0);
+- x < (sizeof(yytname) / sizeof(char *)); x++)
+- if (yycheck[x + yyn] == x)
++ yyprefix = ", expecting ";
++ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
++ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
+ {
+- strcat(msg, count == 0 ? ", expecting `" : " or `");
+- strcat(msg, yytname[x]);
+- strcat(msg, "'");
+- count++;
++ yyp = yystpcpy (yyp, yyprefix);
++ yyp = yystpcpy (yyp, yytname[yyx]);
++ yyprefix = " or ";
+ }
+ }
+- yyerror(msg);
+- free(msg);
++ yyerror (yymsg);
++ YYSTACK_FREE (yymsg);
+ }
+ else
+- yyerror ("parse error; also virtual memory exceeded");
++ yyerror ("syntax error; also virtual memory exhausted");
+ }
+ else
+ #endif /* YYERROR_VERBOSE */
+- yyerror("parse error");
++ yyerror ("syntax error");
+ }
+
+- goto yyerrlab1;
+-yyerrlab1: /* here on error raised explicitly by an action */
++
+
+ if (yyerrstatus == 3)
+ {
+- /* if just tried and failed to reuse lookahead token after an error, discard it. */
++ /* If just tried and failed to reuse lookahead token after an
++ error, discard it. */
+
+- /* return failure if at end of input */
+- if (yychar == YYEOF)
+- YYABORT;
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]);
+-#endif
++ if (yychar <= YYEOF)
++ {
++ /* If at end of input, pop the error token,
++ then the rest of the stack, then return failure. */
++ if (yychar == YYEOF)
++ for (;;)
++ {
++ YYPOPSTACK;
++ if (yyssp == yyss)
++ YYABORT;
++ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
++ yydestruct (yystos[*yyssp], yyvsp);
++ }
++ }
++ else
++ {
++ YYDSYMPRINTF ("Error: discarding", yytoken, &yylval, &yylloc);
++ yydestruct (yytoken, &yylval);
++ yychar = YYEMPTY;
+
+- yychar = YYEMPTY;
++ }
+ }
+
+- /* Else will try to reuse lookahead token
+- after shifting the error token. */
+-
+- yyerrstatus = 3; /* Each real token shifted decrements this */
++ /* Else will try to reuse lookahead token after shifting the error
++ token. */
++ goto yyerrlab1;
+
+- goto yyerrhandle;
+
+-yyerrdefault: /* current state does not do anything special for the error token. */
++/*---------------------------------------------------.
++| yyerrorlab -- error raised explicitly by YYERROR. |
++`---------------------------------------------------*/
++yyerrorlab:
+
+-#if 0
+- /* This is wrong; only states that explicitly want error tokens
+- should shift them. */
+- yyn = yydefact[yystate]; /* If its default is to accept any token, ok. Otherwise pop it.*/
+- if (yyn) goto yydefault;
++#ifdef __GNUC__
++ /* Pacify GCC when the user code never invokes YYERROR and the label
++ yyerrorlab therefore never appears in user code. */
++ if (0)
++ goto yyerrorlab;
+ #endif
+
+-yyerrpop: /* pop the current state because it cannot handle the error token */
+-
+- if (yyssp == yyss) YYABORT;
+- yyvsp--;
+- yystate = *--yyssp;
+-#ifdef YYLSP_NEEDED
+- yylsp--;
+-#endif
++ yyvsp -= yylen;
++ yyssp -= yylen;
++ yystate = *yyssp;
++ goto yyerrlab1;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- short *ssp1 = yyss - 1;
+- fprintf (stderr, "Error: state stack now");
+- while (ssp1 != yyssp)
+- fprintf (stderr, " %d", *++ssp1);
+- fprintf (stderr, "\n");
+- }
+-#endif
+
+-yyerrhandle:
++/*-------------------------------------------------------------.
++| yyerrlab1 -- common code for both syntax error and YYERROR. |
++`-------------------------------------------------------------*/
++yyerrlab1:
++ yyerrstatus = 3; /* Each real token shifted decrements this. */
+
+- yyn = yypact[yystate];
+- if (yyn == YYFLAG)
+- goto yyerrdefault;
++ for (;;)
++ {
++ yyn = yypact[yystate];
++ if (yyn != YYPACT_NINF)
++ {
++ yyn += YYTERROR;
++ if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
++ {
++ yyn = yytable[yyn];
++ if (0 < yyn)
++ break;
++ }
++ }
+
+- yyn += YYTERROR;
+- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
+- goto yyerrdefault;
++ /* Pop the current state because it cannot handle the error token. */
++ if (yyssp == yyss)
++ YYABORT;
+
+- yyn = yytable[yyn];
+- if (yyn < 0)
+- {
+- if (yyn == YYFLAG)
+- goto yyerrpop;
+- yyn = -yyn;
+- goto yyreduce;
++ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
++ yydestruct (yystos[yystate], yyvsp);
++ YYPOPSTACK;
++ yystate = *yyssp;
++ YY_STACK_PRINT (yyss, yyssp);
+ }
+- else if (yyn == 0)
+- goto yyerrpop;
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Shifting error token, ");
+-#endif
++ YYDPRINTF ((stderr, "Shifting error token, "));
+
+ *++yyvsp = yylval;
+-#ifdef YYLSP_NEEDED
+- *++yylsp = yylloc;
+-#endif
++
+
+ yystate = yyn;
+ goto yynewstate;
+
+- yyacceptlab:
+- /* YYACCEPT comes here. */
+- if (yyfree_stacks)
+- {
+- free (yyss);
+- free (yyvs);
+-#ifdef YYLSP_NEEDED
+- free (yyls);
+-#endif
+- }
+- return 0;
+
+- yyabortlab:
+- /* YYABORT comes here. */
+- if (yyfree_stacks)
+- {
+- free (yyss);
+- free (yyvs);
+-#ifdef YYLSP_NEEDED
+- free (yyls);
++/*-------------------------------------.
++| yyacceptlab -- YYACCEPT comes here. |
++`-------------------------------------*/
++yyacceptlab:
++ yyresult = 0;
++ goto yyreturn;
++
++/*-----------------------------------.
++| yyabortlab -- YYABORT comes here. |
++`-----------------------------------*/
++yyabortlab:
++ yyresult = 1;
++ goto yyreturn;
++
++#ifndef yyoverflow
++/*----------------------------------------------.
++| yyoverflowlab -- parser overflow comes here. |
++`----------------------------------------------*/
++yyoverflowlab:
++ yyerror ("parser stack overflow");
++ yyresult = 2;
++ /* Fall through. */
++#endif
++
++yyreturn:
++#ifndef yyoverflow
++ if (yyss != yyssa)
++ YYSTACK_FREE (yyss);
+ #endif
+- }
+- return 1;
++ return yyresult;
+ }
+-#line 418 "cfg_y.y"
++
++
++
+--- linux-atm-2.4.1.orig/src/sigd/proto.c
++++ linux-atm-2.4.1/src/sigd/proto.c
+@@ -259,6 +259,7 @@
+ break;
+ }
+ default:
++ break;
+ }
+ va_end(ap);
+ if ((size = q_close(&dsc)) >= 0) to_signaling(sock->sig,q_buffer,size);
+@@ -288,6 +289,7 @@
+ }
+ break;
+ default:
++ break;
+ }
+ va_end(ap);
+ }
+--- linux-atm-2.4.1.orig/src/sigd/cfg_y.y
++++ linux-atm-2.4.1/src/sigd/cfg_y.y
+@@ -7,6 +7,7 @@
+ #include <config.h>
+ #endif
+
++#include <stdlib.h>
+ #include <string.h>
+ #include <ctype.h>
+ #include <limits.h>
+@@ -19,6 +20,8 @@
+ #include "trace.h"
+ #include "policy.h"
+
++extern void yywarn(const char *s);
++extern void yyerror(const char *s);
+
+ static RULE *rule;
+ static SIG_ENTITY *curr_sig = &_entity;
+@@ -125,8 +128,16 @@
+ if (entities == &_entity) entities = NULL;
+ for (sig = entities; sig; sig = sig->next)
+ if (atm_equal((struct sockaddr *) &sig->signaling_pvc,
+- (struct sockaddr *) &$2,0,0))
+- yyerror("duplicate PVC address %d.%d.%d",S_PVC(sig));
++ (struct sockaddr *) &$2,0,0)) {
++ const char *err;
++ asprintf(&err,"duplicate PVC address %d.%d.%d",S_PVC(sig));
++ if(err) {
++ yyerror(err);
++ free(err);
++ }
++ else
++ yyerror("duplicate PVC address");
++ }
+ curr_sig = alloc_t(SIG_ENTITY);
+ *curr_sig = _entity;
+ curr_sig->signaling_pvc = $2;
+@@ -169,7 +180,7 @@
+ if (text2atm($1,(struct sockaddr *) &addr,sizeof(addr),
+ T2A_SVC | T2A_WILDCARD | T2A_NAME | T2A_LOCAL) < 0) {
+ yyerror("invalid address");
+- return;
++ return 0;
+ }
+ add_route(curr_sig,&addr,mask ? strtol(mask,NULL,10) : INT_MAX);
+ }
+--- linux-atm-2.4.1.orig/src/sigd/cfg_y.h
++++ linux-atm-2.4.1/src/sigd/cfg_y.h
+@@ -1,44 +1,127 @@
+-typedef union {
++/* A Bison parser, made by GNU Bison 1.875d. */
++
++/* Skeleton parser for Yacc-like parsing with Bison,
++ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2, or (at your option)
++ any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place - Suite 330,
++ Boston, MA 02111-1307, USA. */
++
++/* As a special exception, when this file is copied by Bison into a
++ Bison output file, you may use that output file without restriction.
++ This special exception was added by the Free Software Foundation
++ in version 1.24 of Bison. */
++
++/* Tokens. */
++#ifndef YYTOKENTYPE
++# define YYTOKENTYPE
++ /* Put the tokens into the symbol table, so that GDB and other debuggers
++ know about them. */
++ enum yytokentype {
++ TOK_LEVEL = 258,
++ TOK_DEBUG = 259,
++ TOK_INFO = 260,
++ TOK_WARN = 261,
++ TOK_ERROR = 262,
++ TOK_FATAL = 263,
++ TOK_SIG = 264,
++ TOK_UNI30 = 265,
++ TOK_UNI31 = 266,
++ TOK_UNI40 = 267,
++ TOK_Q2963_1 = 268,
++ TOK_SAAL = 269,
++ TOK_VC = 270,
++ TOK_IO = 271,
++ TOK_MODE = 272,
++ TOK_USER = 273,
++ TOK_NET = 274,
++ TOK_SWITCH = 275,
++ TOK_VPCI = 276,
++ TOK_ITF = 277,
++ TOK_PCR = 278,
++ TOK_TRACE = 279,
++ TOK_POLICY = 280,
++ TOK_ALLOW = 281,
++ TOK_REJECT = 282,
++ TOK_ENTITY = 283,
++ TOK_DEFAULT = 284,
++ TOK_NUMBER = 285,
++ TOK_MAX_RATE = 286,
++ TOK_DUMP_DIR = 287,
++ TOK_LOGFILE = 288,
++ TOK_QOS = 289,
++ TOK_FROM = 290,
++ TOK_TO = 291,
++ TOK_ROUTE = 292,
++ TOK_PVC = 293
++ };
++#endif
++#define TOK_LEVEL 258
++#define TOK_DEBUG 259
++#define TOK_INFO 260
++#define TOK_WARN 261
++#define TOK_ERROR 262
++#define TOK_FATAL 263
++#define TOK_SIG 264
++#define TOK_UNI30 265
++#define TOK_UNI31 266
++#define TOK_UNI40 267
++#define TOK_Q2963_1 268
++#define TOK_SAAL 269
++#define TOK_VC 270
++#define TOK_IO 271
++#define TOK_MODE 272
++#define TOK_USER 273
++#define TOK_NET 274
++#define TOK_SWITCH 275
++#define TOK_VPCI 276
++#define TOK_ITF 277
++#define TOK_PCR 278
++#define TOK_TRACE 279
++#define TOK_POLICY 280
++#define TOK_ALLOW 281
++#define TOK_REJECT 282
++#define TOK_ENTITY 283
++#define TOK_DEFAULT 284
++#define TOK_NUMBER 285
++#define TOK_MAX_RATE 286
++#define TOK_DUMP_DIR 287
++#define TOK_LOGFILE 288
++#define TOK_QOS 289
++#define TOK_FROM 290
++#define TOK_TO 291
++#define TOK_ROUTE 292
++#define TOK_PVC 293
++
++
++
++
++#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
++#line 56 "cfg_y.y"
++typedef union YYSTYPE {
+ int num;
+ char *str;
+ struct sockaddr_atmpvc pvc;
+ } YYSTYPE;
+-#define TOK_LEVEL 257
+-#define TOK_DEBUG 258
+-#define TOK_INFO 259
+-#define TOK_WARN 260
+-#define TOK_ERROR 261
+-#define TOK_FATAL 262
+-#define TOK_SIG 263
+-#define TOK_UNI30 264
+-#define TOK_UNI31 265
+-#define TOK_UNI40 266
+-#define TOK_Q2963_1 267
+-#define TOK_SAAL 268
+-#define TOK_VC 269
+-#define TOK_IO 270
+-#define TOK_MODE 271
+-#define TOK_USER 272
+-#define TOK_NET 273
+-#define TOK_SWITCH 274
+-#define TOK_VPCI 275
+-#define TOK_ITF 276
+-#define TOK_PCR 277
+-#define TOK_TRACE 278
+-#define TOK_POLICY 279
+-#define TOK_ALLOW 280
+-#define TOK_REJECT 281
+-#define TOK_ENTITY 282
+-#define TOK_DEFAULT 283
+-#define TOK_NUMBER 284
+-#define TOK_MAX_RATE 285
+-#define TOK_DUMP_DIR 286
+-#define TOK_LOGFILE 287
+-#define TOK_QOS 288
+-#define TOK_FROM 289
+-#define TOK_TO 290
+-#define TOK_ROUTE 291
+-#define TOK_PVC 292
+-
++/* Line 1285 of yacc.c. */
++#line 119 "y.tab.h"
++# define yystype YYSTYPE /* obsolescent; will be withdrawn */
++# define YYSTYPE_IS_DECLARED 1
++# define YYSTYPE_IS_TRIVIAL 1
++#endif
+
+ extern YYSTYPE yylval;
++
++
++
+--- linux-atm-2.4.1.orig/src/maint/Makefile.in
++++ linux-atm-2.4.1/src/maint/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -181,8 +181,11 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/atmaddr.P .deps/atmdiag.P .deps/atmdump.P \
++.deps/atmloop.P .deps/atmtcp.P .deps/enitune.P .deps/esi.P \
++.deps/saaldump.P .deps/sonetdiag.P .deps/zntune.P
+ SOURCES = $(atmdiag_SOURCES) $(atmdump_SOURCES) $(sonetdiag_SOURCES) $(saaldump_SOURCES) $(atmaddr_SOURCES) $(esi_SOURCES) $(atmloop_SOURCES) $(atmtcp_SOURCES) $(enitune_SOURCES) $(zntune_SOURCES)
+ OBJECTS = $(atmdiag_OBJECTS) $(atmdump_OBJECTS) $(sonetdiag_OBJECTS) $(saaldump_OBJECTS) $(atmaddr_OBJECTS) $(esi_OBJECTS) $(atmloop_OBJECTS) $(atmtcp_OBJECTS) $(enitune_OBJECTS) $(zntune_OBJECTS)
+
+@@ -190,9 +193,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/maint/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/maint/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -247,9 +250,6 @@
+ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -272,9 +272,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -388,7 +385,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -404,6 +401,11 @@
+ subdir = src/maint
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/maint/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -414,28 +416,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-atmaddr.o: atmaddr.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-atmdiag.o: atmdiag.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-atmdump.o: atmdump.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h
+-atmloop.o: atmloop.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-atmtcp.o: atmtcp.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h ../../src/include/atmd.h
+-enitune.o: enitune.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-esi.o: esi.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-saaldump.o: saaldump.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/saal/pdu.h \
+- ../../src/include/atmd.h ../../src/qgen/qlib.h
+-sonetdiag.o: sonetdiag.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+-zntune.o: zntune.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -475,18 +487,19 @@
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-sbinPROGRAMS \
+ mostlyclean-compile mostlyclean-libtool \
+- mostlyclean-tags mostlyclean-generic
++ mostlyclean-tags mostlyclean-depend mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-binPROGRAMS clean-sbinPROGRAMS clean-compile \
+- clean-libtool clean-tags clean-generic mostlyclean-am
++ clean-libtool clean-tags clean-depend clean-generic \
++ mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-binPROGRAMS distclean-sbinPROGRAMS \
+ distclean-compile distclean-libtool distclean-tags \
+- distclean-generic clean-am
++ distclean-depend distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+@@ -494,7 +507,8 @@
+ maintainer-clean-am: maintainer-clean-binPROGRAMS \
+ maintainer-clean-sbinPROGRAMS maintainer-clean-compile \
+ maintainer-clean-libtool maintainer-clean-tags \
+- maintainer-clean-generic distclean-am
++ maintainer-clean-depend maintainer-clean-generic \
++ distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -508,12 +522,14 @@
+ clean-compile maintainer-clean-compile mostlyclean-libtool \
+ distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
+ uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/maint/atmtcp.c
++++ linux-atm-2.4.1/src/maint/atmtcp.c
+@@ -60,7 +60,7 @@
+ static IN *inputs = NULL;
+ static fd_set in_set;
+ static int fds = 0;
+-static int debug = 0;
++static int atmtcp_debug = 0;
+ static int links = 0;
+
+
+@@ -86,7 +86,7 @@
+ {
+ OUT *out;
+
+- if (debug)
++ if (atmtcp_debug)
+ fprintf(stderr,"Emit: %d.%d, %d bytes\n",ntohs(hdr->vpi),
+ ntohs(hdr->vci),(int) ntohl(hdr->length));
+ for (out = outputs; out; out = out->next)
+@@ -99,7 +99,7 @@
+ OUT *out;
+ int changed = 0;
+
+- if (debug)
++ if (atmtcp_debug)
+ fprintf(stderr,"Control: (%d.%d) %s %d.%d, vcc %s\n",
+ ntohs(msg->hdr.vpi),ntohs(msg->hdr.vci),
+ msg->type == ATMTCP_CTRL_OPEN ? "OPEN" :
+@@ -295,19 +295,19 @@
+ }
+ if ((s = socket(PF_ATMPVC,SOCK_DGRAM,0)) < 0) {
+ msg->result = -errno;
+- if (debug) perror("socket");
++ if (atmtcp_debug) perror("socket");
+ return 1;
+ }
+ if (setsockopt(s,SOL_ATM,SO_ATMQOS,&msg->qos,sizeof(msg->qos)) < 0) {
+ msg->result = -errno;
+- if (debug) perror("setsockopt SO_ATMQOS");
++ if (atmtcp_debug) perror("setsockopt SO_ATMQOS");
+ return 1;
+ }
+ msg->addr.sap_addr.itf = data->itf;
+ if (connect(s,(struct sockaddr *) &msg->addr,
+ sizeof(struct sockaddr_atmpvc)) < 0) {
+ msg->result = -errno;
+- if (debug) perror("connect");
++ if (atmtcp_debug) perror("connect");
+ return 1;
+ }
+ (*vcc) = alloc_t(VCC);
+@@ -333,7 +333,7 @@
+ addr.sap_addr.vci = ntohs(hdr->vci);
+ vcc = real_lookup(data,&addr);
+ if (!*vcc) {
+- if (debug)
++ if (atmtcp_debug)
+ fprintf(stderr,"VCC %d.%d not found\n",addr.sap_addr.vpi,
+ addr.sap_addr.vci);
+ return;
+@@ -430,7 +430,7 @@
+ exit(1);
+ }
+ if (in->bytes < sizeof(*hdr)+ntohl(hdr->length)) return;
+- if (debug)
++ if (atmtcp_debug)
+ fprintf(stderr,"TCP %d.%d, %d bytes\n",ntohs(hdr->vpi),
+ ntohs(hdr->vci),(unsigned int) ntohl(hdr->length));
+ in->bytes = 0;
+@@ -447,7 +447,7 @@
+ fprintf(stderr,"unrecognized control message \"%s\"\n",msg);
+ return;
+ }
+- if (debug) fprintf(stderr,"received control \"%s\"\n",msg);
++ if (atmtcp_debug) fprintf(stderr,"received control \"%s\"\n",msg);
+ ctl.hdr.vpi = htons(vpi);
+ ctl.hdr.vci = htons(vci);
+ ctl.hdr.length = htonl(ATMTCP_HDR_MAGIC);
+@@ -508,7 +508,7 @@
+ }
+ hdr->vpi = hdr->vci = htons(0);
+ hdr->length = htonl(pos-start);
+- if (debug) fprintf(stderr,"sending control \"%s\"\n",start);
++ if (atmtcp_debug) fprintf(stderr,"sending control \"%s\"\n",start);
+ tcp_do_send(*(int *) out->user,buf,pos-buf);
+ return 0;
+ }
+@@ -555,7 +555,7 @@
+ exit(1);
+ }
+ if (in->bytes < sizeof(int)+sizeof(*hdr)+ntohl(hdr->length)) return;
+- if (debug)
++ if (atmtcp_debug)
+ fprintf(stderr,"File %d.%d, %d bytes\n",ntohs(hdr->vpi),
+ ntohs(hdr->vci),(unsigned int) ntohl(hdr->length));
+ }
+@@ -708,7 +708,7 @@
+ while ((c = getopt(argc,argv,"dvV")) != EOF)
+ switch (c) {
+ case 'd':
+- debug = 1;
++ atmtcp_debug = 1;
+ break;
+ case 'v':
+ verbose = 1;
+@@ -817,7 +817,8 @@
+ }
+ else if (!strcmp(ARG,"listen") ||
+ (do_background = !strcmp(ARG,"listen-bg"))) {
+- int fd,port,addr_len;
++ int fd,port;
++ size_t addr_len;
+ int *fd2 = alloc_t(int);
+
+ if ((fd = socket(PF_INET,SOCK_STREAM,0)) < 0) {
+--- linux-atm-2.4.1.orig/src/maint/enitune.c
++++ linux-atm-2.4.1/src/maint/enitune.c
+@@ -44,6 +44,7 @@
+ if (*end || mult.rx <= 100) usage(name);
+ break;
+ default:
++ break;
+ }
+ if (argc != optind+1) usage(name);
+ sioc.number = strtol(argv[optind],&end,0);
+--- linux-atm-2.4.1.orig/src/arpd/Makefile.in
++++ linux-atm-2.4.1/src/arpd/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -90,8 +90,7 @@
+ sbin_PROGRAMS = atmarp atmarpd
+
+ atmarp_SOURCES = atmarp.c atmarp.h atmarpd.h
+-atmarpd_SOURCES = atmarpd.c atmarpd.h arp.c arp.h io.c io.h itf.c itf.h \
+- table.c table.h atmarp.h
++atmarpd_SOURCES = atmarpd.c atmarpd.h arp.c arp.h io.c io.h itf.c itf.h table.c table.h atmarp.h
+
+
+ include_HEADERS = atmarp.h atmarpd.h
+@@ -135,8 +134,10 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/arp.P .deps/atmarp.P .deps/atmarpd.P .deps/io.P \
++.deps/itf.P .deps/table.P
+ SOURCES = $(atmarp_SOURCES) $(atmarpd_SOURCES)
+ OBJECTS = $(atmarp_OBJECTS) $(atmarpd_OBJECTS)
+
+@@ -144,9 +145,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/arpd/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/arpd/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -176,9 +177,6 @@
+ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -201,9 +199,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -300,7 +295,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -316,6 +311,11 @@
+ subdir = src/arpd
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/arpd/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -326,24 +326,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-arp.o: arp.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h ../../src/include/atmd.h atmarp.h \
+- atmarpd.h table.h itf.h io.h arp.h
+-atmarp.o: atmarp.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h ../../src/include/atmd.h atmarpd.h
+-atmarpd.o: atmarpd.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h atmarpd.h \
+- io.h table.h
+-io.o: io.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h ../../src/include/atmd.h atmarpd.h \
+- table.h arp.h atmarp.h itf.h io.h
+-itf.o: itf.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atmd.h ../../src/include/atm.h table.h io.h \
+- itf.h arp.h atmarp.h atmarpd.h
+-table.o: table.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h ../../src/include/atmd.h atmarpd.h \
+- table.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -383,27 +397,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-sbinPROGRAMS distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -416,8 +430,9 @@
+ distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
+ uninstall-man8 install-man uninstall-man uninstall-includeHEADERS \
+ install-includeHEADERS tags mostlyclean-tags distclean-tags clean-tags \
+-maintainer-clean-tags distdir info-am info dvi-am dvi check check-am \
+-installcheck-am installcheck install-exec-am install-exec \
++maintainer-clean-tags distdir mostlyclean-depend distclean-depend \
++clean-depend maintainer-clean-depend info-am info dvi-am dvi check \
++check-am installcheck-am installcheck install-exec-am install-exec \
+ install-data-am install-data install-am install uninstall-am uninstall \
+ all-redirect all-am all installdirs mostlyclean-generic \
+ distclean-generic clean-generic maintainer-clean-generic clean \
+--- linux-atm-2.4.1.orig/src/arpd/atmarp.c
++++ linux-atm-2.4.1/src/arpd/atmarp.c
+@@ -92,7 +92,7 @@
+ perror("read " ATMARP_DUMP_DIR "/" ATMARP_DUMP_FILE);
+ return 1;
+ }
+- if (write(0,buffer,size) < 0) {
++ if (write(1,buffer,size) < 0) {
+ perror("write stdout");
+ return 1;
+ }
+--- linux-atm-2.4.1.orig/src/ilmid/Makefile.in
++++ linux-atm-2.4.1/src/ilmid/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -91,13 +91,9 @@
+
+ sbin_PROGRAMS = ilmid
+
+-ilmid_SOURCES = rfc1157_snmp.c rfc1157_snmp.h rfc1155_smi.c rfc1155_smi.h \
+- util.c util.h io.c io.h message.c message.h \
+- atmf_uni.c atmf_uni.h mib.c mib.h \
+- sysgroup.c sysgroup.h ilmid.c
++ilmid_SOURCES = rfc1157_snmp.c rfc1157_snmp.h rfc1155_smi.c rfc1155_smi.h util.c util.h io.c io.h message.c message.h atmf_uni.c atmf_uni.h mib.c mib.h sysgroup.c sysgroup.h ilmid.c
+
+-ilmid_LDADD = $(top_builddir)/src/lib/libatm.la \
+- $(top_builddir)/src/ilmid/asn1/libasn1.a
++ilmid_LDADD = $(top_builddir)/src/lib/libatm.la $(top_builddir)/src/ilmid/asn1/libasn1.a
+
+ ilmid_DEPENDENCIES = $(ilmid_LDADD)
+
+@@ -127,8 +123,11 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/atmf_uni.P .deps/ilmid.P .deps/io.P .deps/message.P \
++.deps/mib.P .deps/rfc1155_smi.P .deps/rfc1157_snmp.P .deps/sysgroup.P \
++.deps/util.P
+ SOURCES = $(ilmid_SOURCES)
+ OBJECTS = $(ilmid_OBJECTS)
+
+@@ -136,9 +135,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/ilmid/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/ilmid/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -168,9 +167,6 @@
+ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -193,9 +189,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -294,7 +287,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -310,6 +303,11 @@
+ subdir = src/ilmid
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/ilmid/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -330,62 +328,38 @@
+ || exit 1; \
+ fi; \
+ done
+-atmf_uni.o: atmf_uni.c ../../config.h atmf_uni.h asn1/asn_incl.h \
+- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
+- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
+- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
+- rfc1155_smi.h rfc1157_snmp.h mib.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h util.h
+-ilmid.o: ilmid.c ../../config.h asn1/asn_incl.h asn1/asn_config.h \
+- asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h asn1/asn_len.h \
+- asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h asn1/asn_bits.h \
+- asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h rfc1155_smi.h \
+- rfc1157_snmp.h message.h util.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h io.h mib.h \
+- atmf_uni.h sysgroup.h
+-io.o: io.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h io.h asn1/asn_incl.h asn1/asn_config.h \
+- asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h asn1/asn_len.h \
+- asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h asn1/asn_bits.h \
+- asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h rfc1155_smi.h \
+- rfc1157_snmp.h ../../src/include/atmd.h atmf_uni.h mib.h
+-message.o: message.c ../../config.h message.h asn1/asn_incl.h \
+- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
+- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
+- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
+- rfc1155_smi.h rfc1157_snmp.h atmf_uni.h mib.h \
+- ../../src/include/atmd.h ../../src/include/stdint.h \
+- ../../src/include/atm.h util.h
+-mib.o: mib.c ../../config.h mib.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h \
+- asn1/asn_incl.h asn1/asn_config.h asn1/nibble_alloc.h \
+- asn1/sbuf.h asn1/print.h asn1/asn_len.h asn1/asn_tag.h \
+- asn1/asn_int.h asn1/asn_octs.h asn1/asn_bits.h asn1/asn_oid.h \
+- asn1/asn_null.h asn1/asn_list.h rfc1155_smi.h rfc1157_snmp.h \
+- sysgroup.h atmf_uni.h util.h
+-rfc1155_smi.o: rfc1155_smi.c ../../config.h asn1/asn_incl.h \
+- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
+- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
+- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
+- rfc1155_smi.h rfc1157_snmp.h
+-rfc1157_snmp.o: rfc1157_snmp.c ../../config.h asn1/asn_incl.h \
+- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
+- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
+- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
+- rfc1155_smi.h rfc1157_snmp.h
+-sysgroup.o: sysgroup.c ../../config.h sysgroup.h asn1/asn_incl.h \
+- asn1/asn_config.h asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h \
+- asn1/asn_len.h asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h \
+- asn1/asn_bits.h asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h \
+- rfc1155_smi.h rfc1157_snmp.h mib.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h
+-util.o: util.c ../../config.h util.h asn1/asn_incl.h asn1/asn_config.h \
+- asn1/nibble_alloc.h asn1/sbuf.h asn1/print.h asn1/asn_len.h \
+- asn1/asn_tag.h asn1/asn_int.h asn1/asn_octs.h asn1/asn_bits.h \
+- asn1/asn_oid.h asn1/asn_null.h asn1/asn_list.h rfc1155_smi.h \
+- rfc1157_snmp.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-recursive
+ dvi-am:
+@@ -424,27 +398,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-recursive
+
+ clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-recursive
+
+ distclean-am: distclean-sbinPROGRAMS distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-recursive
+
+ maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -460,12 +434,14 @@
+ all-recursive check-recursive installcheck-recursive info-recursive \
+ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs-am \
+-installdirs mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/ilmid/io.c
++++ linux-atm-2.4.1/src/ilmid/io.c
+@@ -32,6 +32,7 @@
+ #include <net/if.h>
+ #include <atm.h>
+ #include <linux/atmdev.h>
++#include <unistd.h>
+ #include "io.h"
+ #include "atmd.h"
+ #include "atmf_uni.h"
+@@ -299,4 +300,5 @@
+ diag(COMPONENT,DIAG_ERROR,"ioctl ATM_GETCIRANGE: %s",strerror(errno));
+ return error;
+ }
++ return 0;
+ }
+--- linux-atm-2.4.1.orig/src/ilmid/atmf_uni.c
++++ linux-atm-2.4.1/src/ilmid/atmf_uni.c
+@@ -187,7 +187,7 @@
+ newPrefix->name = alloc_t(AsnOid);
+ newPrefix->name->octs = alloc(varBindName->octetLen);
+ AsnOidCopy(newPrefix->name, varBindName);
+- Q_INSERT_BEFORE((NetPrefixNode *) var->value, newPrefix, prefix);
++ Q_INSERT_BEFORE_TYPED(var->value,(NetPrefixNode *), newPrefix, prefix);
+ if(atmNetPrefix.octs == NULL)
+ {
+ atmNetPrefix.octetLen = varBindName->octetLen - NETPREFIX_LEN - 2;
+@@ -197,7 +197,7 @@
+ }
+ else if (varbind->value->a.simple->a.number == INVALID && cmp == AsnOidEqual)
+ {
+- Q_REMOVE((NetPrefixNode *) var->value, prefix);
++ Q_REMOVE(var->value, prefix);
+ }
+
+ return NOERROR;
+--- linux-atm-2.4.1.orig/src/ilmid/mib.c
++++ linux-atm-2.4.1/src/ilmid/mib.c
+@@ -58,13 +58,13 @@
+ { NULL }
+ };
+
+-void MIBget(VarBindList *list, PDUInt *status, AsnInt *index)
++void MIBget(VarBindList *list, PDUInt *status, AsnInt *Mindex)
+ {
+ VarBind *varbind;
+ Variable *var;
+ AsnOidResult result;
+
+- *index = 1;
++ *Mindex = 1;
+ FOR_EACH_LIST_ELMT(varbind, list)
+ {
+ /* Find the first MIB object not lexigraphically less than the *
+@@ -91,20 +91,20 @@
+ if(*status != NOERROR)
+ return;
+
+- (*index)++;
++ (*Mindex)++;
+ }
+- *index = 0;
++ *Mindex = 0;
+ return;
+ }
+
+
+-void MIBgetnext(VarBindList *list, PDUInt *status, AsnInt *index)
++void MIBgetnext(VarBindList *list, PDUInt *status, AsnInt *Mindex)
+ {
+ VarBind *varbind;
+ Variable *var;
+ AsnOidResult result;
+
+- *index = 1;
++ *Mindex = 1;
+ FOR_EACH_LIST_ELMT(varbind, list)
+ {
+ /* Find the first complex MIB object not lexigraphically less than *
+@@ -139,19 +139,19 @@
+ if(*status != NOERROR)
+ return;
+
+- (*index)++;
++ (*Mindex)++;
+ }
+- *index = 0;
++ *Mindex = 0;
+ return;
+ }
+
+-void MIBset(VarBindList *list, PDUInt *status, AsnInt *index)
++void MIBset(VarBindList *list, PDUInt *status, AsnInt *Mindex)
+ {
+ VarBind *varbind;
+ Variable *var;
+ AsnOidResult result;
+
+- *index = 1;
++ *Mindex = 1;
+ FOR_EACH_LIST_ELMT(varbind, list)
+ {
+ /* Find the first MIB object not lexigraphically less than the *
+@@ -182,9 +182,9 @@
+ if(*status != NOERROR)
+ return;
+
+- (*index)++;
++ (*Mindex)++;
+ }
+- *index = 0;
++ *Mindex = 0;
+ return;
+ }
+
+--- linux-atm-2.4.1.orig/src/ilmid/mib.h
++++ linux-atm-2.4.1/src/ilmid/mib.h
+@@ -39,9 +39,9 @@
+ void *value;
+ } Variable;
+
+-void MIBget(VarBindList *list, PDUInt *status, AsnInt *index);
+-void MIBgetnext(VarBindList *list, PDUInt *status, AsnInt *index);
+-void MIBset(VarBindList *list, PDUInt *status, AsnInt *index);
++void MIBget(VarBindList *list, PDUInt *status, AsnInt *Mindex);
++void MIBgetnext(VarBindList *list, PDUInt *status, AsnInt *Mindex);
++void MIBset(VarBindList *list, PDUInt *status, AsnInt *Mindex);
+ void *MIBdelete(AsnOid *oid);
+
+ AsnInt getString(VarBind *varbind, Variable *var);
+--- linux-atm-2.4.1.orig/src/ilmid/ilmid.c
++++ linux-atm-2.4.1/src/ilmid/ilmid.c
+@@ -33,6 +33,7 @@
+ #include <config.h>
+ #endif
+
++#include <stdlib.h>
+ #include <unistd.h>
+ #include <sys/time.h>
+ #include <errno.h>
+--- linux-atm-2.4.1.orig/src/ilmid/asn1/Makefile.in
++++ linux-atm-2.4.1/src/ilmid/asn1/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -87,13 +87,7 @@
+
+ noinst_LIBRARIES = libasn1.a
+
+-libasn1_a_SOURCES = asn_len.c asn_len.h asn_tag.c asn_tag.h \
+- asn_int.c asn_int.h asn_octs.c asn_octs.h \
+- asn_bits.c asn_bits.h str_stk.c str_stk.h \
+- asn_oid.c asn_oid.h asn_null.c asn_null.h \
+- asn_list.c asn_list.h nibble_alloc.c nibble_alloc.h \
+- print.c print.h \
+- asn_config.h min_buf.h sbuf.h exp_buf.h
++libasn1_a_SOURCES = asn_len.c asn_len.h asn_tag.c asn_tag.h asn_int.c asn_int.h asn_octs.c asn_octs.h asn_bits.c asn_bits.h str_stk.c str_stk.h asn_oid.c asn_oid.h asn_null.c asn_null.h asn_list.c asn_list.h nibble_alloc.c nibble_alloc.h print.c print.h asn_config.h min_buf.h sbuf.h exp_buf.h
+
+
+ EXTRA_libasn1_a_SOURCES = asn_incl.h exp_buf.c
+@@ -125,8 +119,12 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/asn_bits.P .deps/asn_int.P .deps/asn_len.P \
++.deps/asn_list.P .deps/asn_null.P .deps/asn_octs.P .deps/asn_oid.P \
++.deps/asn_tag.P .deps/exp_buf.P .deps/nibble_alloc.P .deps/print.P \
++.deps/str_stk.P
+ SOURCES = $(libasn1_a_SOURCES) $(EXTRA_libasn1_a_SOURCES)
+ OBJECTS = $(libasn1_a_OBJECTS)
+
+@@ -134,9 +132,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/ilmid/asn1/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/ilmid/asn1/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -150,9 +148,6 @@
+
+ maintainer-clean-noinstLIBRARIES:
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -175,9 +170,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -217,7 +209,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -233,6 +225,11 @@
+ subdir = src/ilmid/asn1
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/ilmid/asn1/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -243,30 +240,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-asn_bits.o: asn_bits.c ../../../config.h asn_config.h nibble_alloc.h \
+- sbuf.h print.h asn_len.h asn_tag.h str_stk.h asn_bits.h
+-asn_int.o: asn_int.c ../../../config.h asn_config.h nibble_alloc.h \
+- sbuf.h print.h asn_len.h asn_tag.h asn_int.h
+-asn_len.o: asn_len.c ../../../config.h asn_config.h nibble_alloc.h \
+- sbuf.h print.h asn_len.h
+-asn_list.o: asn_list.c ../../../config.h asn_config.h nibble_alloc.h \
+- sbuf.h print.h asn_list.h
+-asn_null.o: asn_null.c ../../../config.h asn_config.h nibble_alloc.h \
+- sbuf.h print.h asn_len.h asn_tag.h asn_null.h
+-asn_octs.o: asn_octs.c ../../../config.h asn_config.h nibble_alloc.h \
+- sbuf.h print.h asn_len.h asn_tag.h str_stk.h asn_bits.h \
+- asn_octs.h
+-asn_oid.o: asn_oid.c ../../../config.h asn_config.h nibble_alloc.h \
+- sbuf.h print.h asn_len.h asn_tag.h asn_octs.h asn_oid.h
+-asn_tag.o: asn_tag.c ../../../config.h asn_config.h nibble_alloc.h \
+- sbuf.h print.h asn_len.h asn_tag.h
+-nibble_alloc.o: nibble_alloc.c ../../../config.h asn_config.h \
+- nibble_alloc.h sbuf.h print.h
+-print.o: print.c ../../../config.h asn_config.h nibble_alloc.h sbuf.h \
+- print.h
+-str_stk.o: str_stk.c ../../../config.h asn_config.h nibble_alloc.h \
+- sbuf.h print.h str_stk.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -303,27 +308,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-noinstLIBRARIES clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-noinstLIBRARIES distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -334,12 +339,14 @@
+ mostlyclean-compile distclean-compile clean-compile \
+ maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+ clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_int.c
++++ linux-atm-2.4.1/src/ilmid/asn1/asn_int.c
+@@ -185,7 +185,7 @@
+ AsnInt* v _AND_
+ unsigned short int indent)
+ {
+- fprintf(f,"%d", *v);
++ fprintf(f,"%ld", *v);
+ }
+
+
+@@ -252,7 +252,6 @@
+ UAsnInt* data)
+ {
+ int len;
+- int retLen;
+ int i;
+ unsigned long int mask;
+ unsigned long int dataCpy;
+@@ -370,5 +369,5 @@
+ UAsnInt* v _AND_
+ unsigned short int indent)
+ {
+- fprintf(f,"%u", *v);
++ fprintf(f,"%lu", *v);
+ }
+--- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_octs.c
++++ linux-atm-2.4.1/src/ilmid/asn1/asn_octs.c
+@@ -21,6 +21,9 @@
+ #include <config.h>
+ #endif
+
++#include <stdlib.h>
++#include <string.h>
++
+ #include "asn_config.h"
+ #include "asn_len.h"
+ #include "asn_tag.h"
+--- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_bits.c
++++ linux-atm-2.4.1/src/ilmid/asn1/asn_bits.c
+@@ -21,6 +21,9 @@
+ #include <config.h>
+ #endif
+
++#include <stdlib.h>
++#include <string.h>
++
+ #include "asn_config.h"
+ #include "asn_len.h"
+ #include "asn_tag.h"
+--- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_oid.c
++++ linux-atm-2.4.1/src/ilmid/asn1/asn_oid.c
+@@ -21,6 +21,9 @@
+ #include <config.h>
+ #endif
+
++#include <stdlib.h>
++#include <string.h>
++
+ #include "asn_config.h"
+ #include "asn_len.h"
+ #include "asn_tag.h"
+@@ -125,7 +128,7 @@
+ if (firstArcNum > 2)
+ firstArcNum = 2;
+
+- fprintf(f,"%u %u", firstArcNum, arcNum - (firstArcNum * 40));
++ fprintf(f,"%d %lu", firstArcNum, arcNum - (firstArcNum * 40));
+
+ for (; i < v->octetLen ; )
+ {
+@@ -134,7 +137,7 @@
+
+ arcNum = (arcNum << 7) + (v->octs[i] & 0x7f);
+ i++;
+- fprintf(f," %u", arcNum);
++ fprintf(f," %lu", arcNum);
+ }
+ fprintf(f,"}");
+
+--- linux-atm-2.4.1.orig/src/ilmid/asn1/asn_list.c
++++ linux-atm-2.4.1/src/ilmid/asn1/asn_list.c
+@@ -20,6 +20,8 @@
+ #include <config.h>
+ #endif
+
++#include <stdlib.h>
++
+ #include "asn_config.h"
+ #include "asn_list.h"
+
+--- linux-atm-2.4.1.orig/src/ilmid/asn1/nibble_alloc.c
++++ linux-atm-2.4.1/src/ilmid/asn1/nibble_alloc.c
+@@ -20,7 +20,9 @@
+ #include <config.h>
+ #endif
+
++#include <string.h>
+ #include <memory.h>
++#include <stdlib.h>
+ #include "asn_config.h"
+ #include "nibble_alloc.h"
+
+--- linux-atm-2.4.1.orig/src/ilmid/asn1/nibble_alloc.h
++++ linux-atm-2.4.1/src/ilmid/asn1/nibble_alloc.h
+@@ -39,13 +39,13 @@
+ void InitNibbleMem PROTO((unsigned long int initialSize,
+ unsigned long int incrementSize));
+
+-void ShutdownNibbleMem();
++void ShutdownNibbleMem(void);
+
+ void ServiceNibbleFault PROTO((unsigned long int size));
+
+ void* NibbleAlloc PROTO((unsigned long int size));
+
+-void ResetNibbleMem();
++void ResetNibbleMem(void);
+
+
+ #endif /* conditional include */
+--- linux-atm-2.4.1.orig/src/man/Makefile.in
++++ linux-atm-2.4.1/src/man/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -100,14 +100,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/man/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/man/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -159,6 +159,11 @@
+ subdir = src/man
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/man/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/src/led/Makefile.in
++++ linux-atm-2.4.1/src/led/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -87,9 +87,7 @@
+
+ sbin_PROGRAMS = zeppelin
+
+-zeppelin_SOURCES = join.c join.h conn.c conn.h main.c address.c address.h \
+- frames.c frames.h display.c display.h \
+- kernel.c kernel.h frame_defs.h lec.h
++zeppelin_SOURCES = join.c join.h conn.c conn.h main.c address.c address.h frames.c frames.h display.c display.h kernel.c kernel.h frame_defs.h lec.h
+
+ zeppelin_LDADD = $(top_builddir)/src/lib/libatm.la
+ zeppelin_DEPENDENCIES = $(zeppelin_LDADD)
+@@ -125,8 +123,10 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/address.P .deps/conn.P .deps/display.P .deps/frames.P \
++.deps/join.P .deps/kernel.P .deps/main.P
+ SOURCES = $(zeppelin_SOURCES)
+ OBJECTS = $(zeppelin_OBJECTS)
+
+@@ -134,9 +134,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/led/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/led/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -166,9 +166,6 @@
+ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -191,9 +188,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -271,7 +265,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -287,6 +281,11 @@
+ subdir = src/led
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/led/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -297,28 +296,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-address.o: address.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h address.h
+-conn.o: conn.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmsap.h \
+- ../../src/include/atmd.h conn.h display.h lec.h frames.h \
+- frame_defs.h kernel.h
+-display.o: display.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h display.h \
+- frame_defs.h
+-frames.o: frames.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h conn.h \
+- lec.h frames.h frame_defs.h display.h kernel.h
+-join.o: join.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h conn.h \
+- lec.h join.h frames.h frame_defs.h display.h
+-kernel.o: kernel.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h kernel.h \
+- lec.h conn.h frames.h frame_defs.h
+-main.o: main.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h join.h \
+- lec.h conn.h address.h display.h kernel.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -356,27 +365,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-sbinPROGRAMS distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -388,12 +397,14 @@
+ clean-compile maintainer-clean-compile mostlyclean-libtool \
+ distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
+ uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/lane/Makefile.in
++++ linux-atm-2.4.1/src/lane/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -89,14 +89,11 @@
+
+ LDADD = $(top_builddir)/src/lib/libatm.la
+
+-LES_BUS_SRCS = mem.c mem.h load.c load.h units.c units.h load_lex.l load_lex.h \
+- timers.c timers.h dump.c dump.h lane_atm.c lane_atm.h \
+- events.c events.h lane.c lane.h
++LES_BUS_SRCS = mem.c mem.h load.c load.h units.c units.h load_lex.l load_lex.h timers.c timers.h dump.c dump.h lane_atm.c lane_atm.h events.c events.h lane.c lane.h
+
+ les_SOURCES = $(LES_BUS_SRCS) packet.c packet.h connect.c connect.h db.c db.h
+ bus_SOURCES = $(LES_BUS_SRCS) connect_bus.c
+-lecs_SOURCES = lecs_db.l lecs_db.h lecs_load.c lecs_load.h lecs.c lecs.h \
+- ldb.c ldb.h mem_lecs.c mem_lecs.h atm_lecs.c atm_lecs.h
++lecs_SOURCES = lecs_db.l lecs_db.h lecs_load.c lecs_load.h lecs.c lecs.h ldb.c ldb.h mem_lecs.c mem_lecs.h atm_lecs.c atm_lecs.h
+
+
+ man_MANS = les.8 lecs.8 bus.8
+@@ -148,8 +145,13 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/atm_lecs.P .deps/connect.P .deps/connect_bus.P \
++.deps/db.P .deps/dump.P .deps/events.P .deps/lane.P .deps/lane_atm.P \
++.deps/ldb.P .deps/lecs.P .deps/lecs_db.P .deps/lecs_load.P .deps/load.P \
++.deps/load_lex.P .deps/mem.P .deps/mem_lecs.P .deps/packet.P \
++.deps/timers.P .deps/units.P
+ SOURCES = $(les_SOURCES) $(bus_SOURCES) $(lecs_SOURCES)
+ OBJECTS = $(les_OBJECTS) $(bus_OBJECTS) $(lecs_OBJECTS)
+
+@@ -157,9 +159,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .l .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/lane/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/lane/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -189,9 +191,6 @@
+ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -214,9 +213,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -304,7 +300,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -320,6 +316,11 @@
+ subdir = src/lane
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/lane/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -330,62 +331,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-atm_lecs.o: atm_lecs.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmsap.h \
+- atm_lecs.h
+-connect.o: connect.c ../../config.h ../../src/include/stdint.h mem.h \
+- units.h lane.h dump.h ../../src/include/atm.h \
+- ../../src/include/atmsap.h load.h connect.h timers.h events.h \
+- db.h packet.h lane_atm.h
+-connect_bus.o: connect_bus.c ../../config.h ../../src/include/stdint.h \
+- mem.h units.h lane.h dump.h ../../src/include/atm.h \
+- ../../src/include/atmsap.h load.h connect.h timers.h events.h \
+- lane_atm.h
+-db.o: db.c ../../config.h ../../src/include/stdint.h mem.h units.h \
+- lane.h dump.h ../../src/include/atm.h \
+- ../../src/include/atmsap.h load.h connect.h timers.h events.h \
+- db.h
+-dump.o: dump.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h ../../src/include/atmsap.h dump.h \
+- units.h lane.h load.h
+-events.o: events.c ../../config.h events.h units.h load.h lane.h dump.h \
+- ../../src/include/atm.h ../../src/include/stdint.h \
+- ../../src/include/atmsap.h mem.h timers.h connect.h
+-lane.o: lane.c ../../config.h units.h load.h lane.h dump.h \
+- ../../src/include/atm.h ../../src/include/stdint.h \
+- ../../src/include/atmsap.h mem.h connect.h timers.h events.h
+-lane_atm.o: lane_atm.c ../../config.h lane_atm.h units.h lane.h \
+- connect.h timers.h load.h events.h ../../src/include/atmsap.h \
+- ../../src/include/stdint.h dump.h ../../src/include/atm.h mem.h
+-ldb.o: ldb.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h lecs.h ldb.h mem_lecs.h
+-lecs.o: lecs.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h lecs_load.h ldb.h mem_lecs.h lecs.h \
+- atm_lecs.h
+-lecs_db.o: lecs_db.c ../../config.h lecs_load.h lecs_db.h
+-lecs_load.o: lecs_load.c ../../config.h lecs_load.h lecs_db.h ldb.h \
+- lecs.h
+-load.o: load.c ../../config.h load.h units.h lane.h dump.h \
+- ../../src/include/atm.h ../../src/include/stdint.h \
+- ../../src/include/atmsap.h mem.h load_lex.h
+-load_lex.o: load_lex.c ../../config.h ../../src/include/stdint.h \
+- load_lex.h lane.h units.h load.h mem.h
+-mem.o: mem.c ../../config.h mem.h units.h dump.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmsap.h lane.h \
+- load.h
+-mem_lecs.o: mem_lecs.c ../../config.h mem_lecs.h
+-packet.o: packet.c ../../config.h ../../src/include/stdint.h mem.h \
+- units.h lane.h dump.h ../../src/include/atm.h \
+- ../../src/include/atmsap.h load.h connect.h timers.h events.h \
+- db.h packet.h
+-timers.o: timers.c ../../config.h timers.h units.h load.h lane.h dump.h \
+- ../../src/include/atm.h ../../src/include/stdint.h \
+- ../../src/include/atmsap.h mem.h
+-units.o: units.c ../../config.h units.h mem.h lane.h load.h dump.h \
+- ../../src/include/atm.h ../../src/include/stdint.h \
+- ../../src/include/atmsap.h connect.h timers.h events.h \
+- lane_atm.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -422,29 +399,29 @@
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+ maintainer-clean-generic:
+- -test -z "lecs_dblload_lexl" || rm -f lecs_dbl load_lexl
++ -test -z "lecs_dbcload_lexc" || rm -f lecs_dbc load_lexc
+ mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-sbinPROGRAMS distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -456,12 +433,14 @@
+ clean-compile maintainer-clean-compile mostlyclean-libtool \
+ distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
+ uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/mpoad/Makefile.in
++++ linux-atm-2.4.1/src/mpoad/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -89,9 +89,7 @@
+
+ LDADD = $(top_builddir)/src/lib/libatm.la
+
+-mpcd_SOURCES = get_vars.c get_vars.h io.c io.h k_interf.c k_interf.h main.c \
+- p_factory.c p_recogn.c id_list.c tag_list.c \
+- poll2select.c poll2select.h lecs.c lecs.h packets.h
++mpcd_SOURCES = get_vars.c get_vars.h io.c io.h k_interf.c k_interf.h main.c p_factory.c p_recogn.c id_list.c tag_list.c poll2select.c poll2select.h lecs.c lecs.h packets.h
+
+
+ man_MANS = mpcd.8
+@@ -128,8 +126,11 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/get_vars.P .deps/id_list.P .deps/io.P \
++.deps/k_interf.P .deps/lecs.P .deps/main.P .deps/p_factory.P \
++.deps/p_recogn.P .deps/poll2select.P .deps/tag_list.P
+ SOURCES = $(mpcd_SOURCES)
+ OBJECTS = $(mpcd_OBJECTS)
+
+@@ -137,9 +138,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/mpoad/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/mpoad/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -169,9 +170,6 @@
+ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
+ done
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -194,9 +192,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -274,7 +269,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -290,6 +285,11 @@
+ subdir = src/mpoad
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/mpoad/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -300,29 +300,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-get_vars.o: get_vars.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h packets.h get_vars.h io.h
+-id_list.o: id_list.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h packets.h
+-io.o: io.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h packets.h k_interf.h io.h get_vars.h \
+- poll2select.h
+-k_interf.o: k_interf.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h k_interf.h packets.h io.h get_vars.h
+-lecs.o: lecs.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h ../../src/include/atmsap.h lecs.h \
+- k_interf.h
+-main.o: main.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h packets.h io.h k_interf.h get_vars.h \
+- lecs.h
+-p_factory.o: p_factory.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atm.h packets.h get_vars.h io.h
+-p_recogn.o: p_recogn.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h io.h k_interf.h packets.h
+-poll2select.o: poll2select.c ../../config.h
+-tag_list.o: tag_list.c ../../config.h packets.h ../../src/include/atm.h \
+- ../../src/include/stdint.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -360,27 +369,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-sbinPROGRAMS distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -392,12 +401,14 @@
+ clean-compile maintainer-clean-compile mostlyclean-libtool \
+ distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
+ uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/mpoad/p_factory.c
++++ linux-atm-2.4.1/src/mpoad/p_factory.c
+@@ -34,7 +34,7 @@
+
+ while( count > 1 ) {
+ /* This is the inner loop */
+- sum += * ((uint16_t *) addr)++;
++ sum += * ((uint16_t *) addr); addr += sizeof(uint16_t);
+ count -= 2;
+ }
+
+--- linux-atm-2.4.1.orig/src/switch/Makefile.in
++++ linux-atm-2.4.1/src/switch/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -92,11 +92,9 @@
+
+ swc_SOURCES = swc.c swc.h
+ swc_LDADD = $(top_builddir)/src/lib/libatm.la
+-swc_DEPENDENCIES = $(swc_LDADD) $(top_builddir)/src/include/atm.h \
+- $(top_builddir)/src/include/atmd.h
++swc_DEPENDENCIES = $(swc_LDADD) $(top_builddir)/src/include/atm.h $(top_builddir)/src/include/atmd.h
+
+-libsw_a_SOURCES = control.c dispatch.c dispatch.h proto.c proto.h relay.c \
+- route.c route.h sig.c sig.h cfg_y.y cfg_l.l fab.h
++libsw_a_SOURCES = control.c dispatch.c dispatch.h proto.c proto.h relay.c route.c route.h sig.c sig.h cfg_y.y cfg_l.l fab.h
+
+
+ EXTRA_DIST = cfg_y.h README
+@@ -132,8 +130,11 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/cfg_l.P .deps/cfg_y.P .deps/control.P \
++.deps/dispatch.P .deps/proto.P .deps/relay.P .deps/route.P .deps/sig.P \
++.deps/swc.P
+ SOURCES = $(libsw_a_SOURCES) $(swc_SOURCES)
+ OBJECTS = $(libsw_a_OBJECTS) $(swc_OBJECTS)
+
+@@ -141,9 +142,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .l .lo .o .obj .s .y
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/switch/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/switch/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -157,9 +158,6 @@
+
+ maintainer-clean-noinstLIBRARIES:
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -182,9 +180,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -306,7 +301,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -322,6 +317,11 @@
+ subdir = src/switch
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/switch/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -342,32 +342,38 @@
+ || exit 1; \
+ fi; \
+ done
+-cfg_l.o: cfg_l.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h cfg_y.h
+-cfg_y.o: cfg_y.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h fab.h proto.h \
+- ../../src/include/atmsap.h ../../src/include/atmd.h sig.h \
+- route.h swc.h
+-control.o: control.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h fab.h \
+- proto.h ../../src/include/atmsap.h sig.h dispatch.h swc.h
+-dispatch.o: dispatch.c ../../config.h ../../src/include/atmd.h \
+- ../../src/include/stdint.h ../../src/include/atm.h dispatch.h
+-proto.o: proto.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h sig.h fab.h \
+- proto.h ../../src/include/atmsap.h
+-relay.o: relay.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h fab.h \
+- proto.h ../../src/include/atmsap.h sig.h dispatch.h route.h
+-route.o: route.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h route.h \
+- sig.h
+-sig.o: sig.c ../../config.h ../../src/include/stdint.h \
+- ../../src/include/atmd.h ../../src/include/atm.h dispatch.h \
+- proto.h ../../src/include/atmsap.h sig.h route.h fab.h
+-swc.o: swc.c ../../config.h ../../src/include/atm.h \
+- ../../src/include/stdint.h ../../src/include/atmd.h swc.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-recursive
+ dvi-am:
+@@ -404,22 +410,23 @@
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+ maintainer-clean-generic:
+- -test -z "cfg_llcfg_yhcfg_yc" || rm -f cfg_ll cfg_yh cfg_yc
++ -test -z "cfg_lccfg_yhcfg_yc" || rm -f cfg_lc cfg_yh cfg_yc
+ mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
+ mostlyclean-libtool mostlyclean-noinstPROGRAMS \
+- mostlyclean-tags mostlyclean-generic
++ mostlyclean-tags mostlyclean-depend mostlyclean-generic
+
+ mostlyclean: mostlyclean-recursive
+
+ clean-am: clean-noinstLIBRARIES clean-compile clean-libtool \
+- clean-noinstPROGRAMS clean-tags clean-generic \
+- mostlyclean-am
++ clean-noinstPROGRAMS clean-tags clean-depend \
++ clean-generic mostlyclean-am
+
+ clean: clean-recursive
+
+ distclean-am: distclean-noinstLIBRARIES distclean-compile \
+ distclean-libtool distclean-noinstPROGRAMS \
+- distclean-tags distclean-generic clean-am
++ distclean-tags distclean-depend distclean-generic \
++ clean-am
+ -rm -f libtool
+
+ distclean: distclean-recursive
+@@ -427,7 +434,8 @@
+ maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
+ maintainer-clean-compile maintainer-clean-libtool \
+ maintainer-clean-noinstPROGRAMS maintainer-clean-tags \
+- maintainer-clean-generic distclean-am
++ maintainer-clean-depend maintainer-clean-generic \
++ distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -445,12 +453,14 @@
+ all-recursive check-recursive installcheck-recursive info-recursive \
+ dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+ maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs-am \
+-installdirs mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/switch/cfg_y.c
++++ linux-atm-2.4.1/src/switch/cfg_y.c
+@@ -1,21 +1,87 @@
++/* A Bison parser, made by GNU Bison 1.875d. */
+
+-/* A Bison parser, made from cfg_y.y
+- by GNU Bison version 1.28 */
++/* Skeleton parser for Yacc-like parsing with Bison,
++ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+
+-#define YYBISON 1 /* Identify Bison output. */
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2, or (at your option)
++ any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place - Suite 330,
++ Boston, MA 02111-1307, USA. */
++
++/* As a special exception, when this file is copied by Bison into a
++ Bison output file, you may use that output file without restriction.
++ This special exception was added by the Free Software Foundation
++ in version 1.24 of Bison. */
++
++/* Written by Richard Stallman by simplifying the original so called
++ ``semantic'' parser. */
++
++/* All symbols defined below should begin with yy or YY, to avoid
++ infringing on user name space. This should be done even for local
++ variables, as they might otherwise be expanded by user macros.
++ There are some unavoidable exceptions within include files to
++ define necessary library symbols; they are noted "INFRINGES ON
++ USER NAME SPACE" below. */
++
++/* Identify Bison output. */
++#define YYBISON 1
++
++/* Skeleton name. */
++#define YYSKELETON_NAME "yacc.c"
++
++/* Pure parsers. */
++#define YYPURE 0
++
++/* Using locations. */
++#define YYLSP_NEEDED 0
+
+-#define TOK_COMMAND 257
+-#define TOK_VPCI 258
+-#define TOK_ITF 259
+-#define TOK_DEFAULT 260
+-#define TOK_ROUTE 261
+-#define TOK_STR 262
+-#define TOK_SOCKET 263
+-#define TOK_OPTION 264
+-#define TOK_CONTROL 265
+-#define TOK_NUM 266
+-#define TOK_PVC 267
+
++
++/* Tokens. */
++#ifndef YYTOKENTYPE
++# define YYTOKENTYPE
++ /* Put the tokens into the symbol table, so that GDB and other debuggers
++ know about them. */
++ enum yytokentype {
++ TOK_COMMAND = 258,
++ TOK_VPCI = 259,
++ TOK_ITF = 260,
++ TOK_DEFAULT = 261,
++ TOK_ROUTE = 262,
++ TOK_STR = 263,
++ TOK_SOCKET = 264,
++ TOK_OPTION = 265,
++ TOK_CONTROL = 266,
++ TOK_NUM = 267,
++ TOK_PVC = 268
++ };
++#endif
++#define TOK_COMMAND 258
++#define TOK_VPCI 259
++#define TOK_ITF 260
++#define TOK_DEFAULT 261
++#define TOK_ROUTE 262
++#define TOK_STR 263
++#define TOK_SOCKET 264
++#define TOK_OPTION 265
++#define TOK_CONTROL 266
++#define TOK_NUM 267
++#define TOK_PVC 268
++
++
++
++
++/* Copy the first part of user declarations. */
+ #line 1 "cfg_y.y"
+
+ /* cfg.y - switch configuration language */
+@@ -29,6 +95,7 @@
+ #include <string.h>
+ #include <errno.h>
+ #include <limits.h>
++#include <stdlib.h>
+
+ #include "atm.h"
+
+@@ -38,436 +105,743 @@
+ #include "swc.h"
+
+
++extern void yyerror(const char *s);
++
+ static int itf;
+ static SIGNALING_ENTITY *sig;
+
+
+-#line 27 "cfg_y.y"
+-typedef union {
++
++/* Enabling traces. */
++#ifndef YYDEBUG
++# define YYDEBUG 0
++#endif
++
++/* Enabling verbose error messages. */
++#ifdef YYERROR_VERBOSE
++# undef YYERROR_VERBOSE
++# define YYERROR_VERBOSE 1
++#else
++# define YYERROR_VERBOSE 0
++#endif
++
++#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
++#line 30 "cfg_y.y"
++typedef union YYSTYPE {
+ int num;
+ char *str;
+ struct sockaddr_atmpvc pvc;
+ } YYSTYPE;
+-#include <stdio.h>
+-
+-#ifndef __cplusplus
+-#ifndef __STDC__
+-#define const
+-#endif
++/* Line 191 of yacc.c. */
++#line 137 "y.tab.c"
++# define yystype YYSTYPE /* obsolescent; will be withdrawn */
++# define YYSTYPE_IS_DECLARED 1
++# define YYSTYPE_IS_TRIVIAL 1
+ #endif
+
+
+
+-#define YYFINAL 31
+-#define YYFLAG -32768
+-#define YYNTBASE 16
+-
+-#define YYTRANSLATE(x) ((unsigned)(x) <= 267 ? yytranslate[x] : 27)
+-
+-static const char yytranslate[] = { 0,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 14, 2, 15, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+- 2, 2, 2, 2, 2, 1, 3, 4, 5, 6,
+- 7, 8, 9, 10, 11, 12, 13
+-};
+-
+-#if YYDEBUG != 0
+-static const short yyprhs[] = { 0,
+- 0, 1, 4, 7, 10, 13, 14, 15, 25, 26,
+- 29, 30, 33, 34, 36, 37, 40, 41, 45
+-};
++/* Copy the second part of user declarations. */
++
++
++/* Line 214 of yacc.c. */
++#line 149 "y.tab.c"
++
++#if ! defined (yyoverflow) || YYERROR_VERBOSE
++
++# ifndef YYFREE
++# define YYFREE free
++# endif
++# ifndef YYMALLOC
++# define YYMALLOC malloc
++# endif
++
++/* The parser invokes alloca or malloc; define the necessary symbols. */
++
++# ifdef YYSTACK_USE_ALLOCA
++# if YYSTACK_USE_ALLOCA
++# define YYSTACK_ALLOC alloca
++# endif
++# else
++# if defined (alloca) || defined (_ALLOCA_H)
++# define YYSTACK_ALLOC alloca
++# else
++# ifdef __GNUC__
++# define YYSTACK_ALLOC __builtin_alloca
++# endif
++# endif
++# endif
++
++# ifdef YYSTACK_ALLOC
++ /* Pacify GCC's `empty if-body' warning. */
++# define YYSTACK_FREE(Ptr) do { /* empty */; } while (0)
++# else
++# if defined (__STDC__) || defined (__cplusplus)
++# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */
++# define YYSIZE_T size_t
++# endif
++# define YYSTACK_ALLOC YYMALLOC
++# define YYSTACK_FREE YYFREE
++# endif
++#endif /* ! defined (yyoverflow) || YYERROR_VERBOSE */
++
++
++#if (! defined (yyoverflow) \
++ && (! defined (__cplusplus) \
++ || (defined (YYSTYPE_IS_TRIVIAL) && YYSTYPE_IS_TRIVIAL)))
+
+-static const short yyrhs[] = { -1,
+- 17, 16, 0, 18, 16, 0, 11, 16, 0, 10,
+- 8, 0, 0, 0, 21, 9, 14, 19, 22, 20,
+- 23, 24, 15, 0, 0, 3, 8, 0, 0, 5,
+- 12, 0, 0, 13, 0, 0, 26, 24, 0, 0,
+- 6, 25, 24, 0, 7, 0
+-};
++/* A type that is properly aligned for any stack member. */
++union yyalloc
++{
++ short int yyss;
++ YYSTYPE yyvs;
++ };
++
++/* The size of the maximum gap between one aligned stack and the next. */
++# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1)
++
++/* The size of an array large to enough to hold all stacks, each with
++ N elements. */
++# define YYSTACK_BYTES(N) \
++ ((N) * (sizeof (short int) + sizeof (YYSTYPE)) \
++ + YYSTACK_GAP_MAXIMUM)
++
++/* Copy COUNT objects from FROM to TO. The source and destination do
++ not overlap. */
++# ifndef YYCOPY
++# if defined (__GNUC__) && 1 < __GNUC__
++# define YYCOPY(To, From, Count) \
++ __builtin_memcpy (To, From, (Count) * sizeof (*(From)))
++# else
++# define YYCOPY(To, From, Count) \
++ do \
++ { \
++ register YYSIZE_T yyi; \
++ for (yyi = 0; yyi < (Count); yyi++) \
++ (To)[yyi] = (From)[yyi]; \
++ } \
++ while (0)
++# endif
++# endif
++
++/* Relocate STACK from its old location to the new one. The
++ local variables YYSIZE and YYSTACKSIZE give the old and new number of
++ elements in the stack, and YYPTR gives the new location of the
++ stack. Advance YYPTR to a properly aligned location for the next
++ stack. */
++# define YYSTACK_RELOCATE(Stack) \
++ do \
++ { \
++ YYSIZE_T yynewbytes; \
++ YYCOPY (&yyptr->Stack, Stack, yysize); \
++ Stack = &yyptr->Stack; \
++ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
++ yyptr += yynewbytes / sizeof (*yyptr); \
++ } \
++ while (0)
+
+ #endif
+
+-#if YYDEBUG != 0
+-static const short yyrline[] = { 0,
+- 43, 44, 45, 46, 52, 59, 65, 73, 76, 80,
+- 87, 88, 94, 95, 101, 102, 103, 108, 110
+-};
++#if defined (__STDC__) || defined (__cplusplus)
++ typedef signed char yysigned_char;
++#else
++ typedef short int yysigned_char;
+ #endif
+
++/* YYFINAL -- State number of the termination state. */
++#define YYFINAL 11
++/* YYLAST -- Last index in YYTABLE. */
++#define YYLAST 22
++
++/* YYNTOKENS -- Number of terminals. */
++#define YYNTOKENS 16
++/* YYNNTS -- Number of nonterminals. */
++#define YYNNTS 12
++/* YYNRULES -- Number of rules. */
++#define YYNRULES 20
++/* YYNRULES -- Number of states. */
++#define YYNSTATES 31
++
++/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
++#define YYUNDEFTOK 2
++#define YYMAXUTOK 268
+
+-#if YYDEBUG != 0 || defined (YYERROR_VERBOSE)
++#define YYTRANSLATE(YYX) \
++ ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
+
+-static const char * const yytname[] = { "$","error","$undefined.","TOK_COMMAND",
+-"TOK_VPCI","TOK_ITF","TOK_DEFAULT","TOK_ROUTE","TOK_STR","TOK_SOCKET","TOK_OPTION",
+-"TOK_CONTROL","TOK_NUM","TOK_PVC","'{'","'}'","all","option","sig","@1","@2",
+-"opt_command","opt_itf","opt_via","routes","@3","route", NULL
++/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */
++static const unsigned char yytranslate[] =
++{
++ 0, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 14, 2, 15, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
++ 2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
++ 5, 6, 7, 8, 9, 10, 11, 12, 13
+ };
+-#endif
+
+-static const short yyr1[] = { 0,
+- 16, 16, 16, 16, 17, 19, 20, 18, 21, 21,
+- 22, 22, 23, 23, 24, 24, 25, 24, 26
++#if YYDEBUG
++/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in
++ YYRHS. */
++static const unsigned char yyprhs[] =
++{
++ 0, 0, 3, 4, 7, 10, 13, 16, 17, 18,
++ 28, 29, 32, 33, 36, 37, 39, 40, 43, 44,
++ 48
+ };
+
+-static const short yyr2[] = { 0,
+- 0, 2, 2, 2, 2, 0, 0, 9, 0, 2,
+- 0, 2, 0, 1, 0, 2, 0, 3, 1
++/* YYRHS -- A `-1'-separated list of the rules' RHS. */
++static const yysigned_char yyrhs[] =
++{
++ 17, 0, -1, -1, 18, 17, -1, 19, 17, -1,
++ 11, 17, -1, 10, 8, -1, -1, -1, 22, 9,
++ 14, 20, 23, 21, 24, 25, 15, -1, -1, 3,
++ 8, -1, -1, 5, 12, -1, -1, 13, -1, -1,
++ 27, 25, -1, -1, 6, 26, 25, -1, 7, -1
+ };
+
+-static const short yydefact[] = { 1,
+- 0, 0, 1, 1, 1, 0, 10, 5, 4, 2,
+- 3, 0, 6, 11, 0, 7, 12, 13, 14, 15,
+- 17, 19, 0, 15, 15, 8, 16, 18, 0, 0,
+- 0
++/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
++static const unsigned char yyrline[] =
++{
++ 0, 46, 46, 47, 48, 49, 56, 64, 68, 63,
++ 80, 83, 90, 91, 97, 98, 104, 105, 107, 106,
++ 114
+ };
++#endif
+
+-static const short yydefgoto[] = { 9,
+- 4, 5, 14, 18, 6, 16, 20, 23, 25, 24
++#if YYDEBUG || YYERROR_VERBOSE
++/* YYTNME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM.
++ First, the terminals, then, starting at YYNTOKENS, nonterminals. */
++static const char *const yytname[] =
++{
++ "$end", "error", "$undefined", "TOK_COMMAND", "TOK_VPCI", "TOK_ITF",
++ "TOK_DEFAULT", "TOK_ROUTE", "TOK_STR", "TOK_SOCKET", "TOK_OPTION",
++ "TOK_CONTROL", "TOK_NUM", "TOK_PVC", "'{'", "'}'", "$accept", "all",
++ "option", "sig", "@1", "@2", "opt_command", "opt_itf", "opt_via",
++ "routes", "@3", "route", 0
+ };
++#endif
+
+-static const short yypact[] = { -3,
+- 3, 4, -3, -3, -3, 6,-32768,-32768,-32768,-32768,
+--32768, -1,-32768, 9, 7,-32768,-32768, 8,-32768, -5,
+--32768,-32768, 1, -5, -5,-32768,-32768,-32768, 17, 18,
+--32768
++# ifdef YYPRINT
++/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to
++ token YYLEX-NUM. */
++static const unsigned short int yytoknum[] =
++{
++ 0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
++ 265, 266, 267, 268, 123, 125
+ };
++# endif
+
+-static const short yypgoto[] = { 5,
+--32768,-32768,-32768,-32768,-32768,-32768,-32768, -21,-32768,-32768
++/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
++static const unsigned char yyr1[] =
++{
++ 0, 16, 17, 17, 17, 17, 18, 20, 21, 19,
++ 22, 22, 23, 23, 24, 24, 25, 25, 26, 25,
++ 27
+ };
+
+-
+-#define YYLAST 21
+-
+-
+-static const short yytable[] = { 1,
+- 21, 22, 27, 28, 29, -9, 2, 3, 10, 11,
+- 7, 8, 13, 15, 12, 26, 30, 31, 17, 0,
+- 19
++/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
++static const unsigned char yyr2[] =
++{
++ 0, 2, 0, 2, 2, 2, 2, 0, 0, 9,
++ 0, 2, 0, 2, 0, 1, 0, 2, 0, 3,
++ 1
+ };
+
+-static const short yycheck[] = { 3,
+- 6, 7, 24, 25, 0, 9, 10, 11, 4, 5,
+- 8, 8, 14, 5, 9, 15, 0, 0, 12, -1,
+- 13
++/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
++ STATE-NUM when YYTABLE doesn't specify something else to do. Zero
++ means the default is an error. */
++static const unsigned char yydefact[] =
++{
++ 2, 0, 0, 2, 0, 2, 2, 0, 11, 6,
++ 5, 1, 3, 4, 0, 7, 12, 0, 8, 13,
++ 14, 15, 16, 18, 20, 0, 16, 16, 9, 17,
++ 19
+ };
+-/* -*-C-*- Note some compilers choke on comments on `#line' lines. */
+-#line 3 "/usr/lib/bison.simple"
+-/* This file comes from bison-1.28. */
+
+-/* Skeleton output parser for bison,
+- Copyright (C) 1984, 1989, 1990 Free Software Foundation, Inc.
++/* YYDEFGOTO[NTERM-NUM]. */
++static const yysigned_char yydefgoto[] =
++{
++ -1, 4, 5, 6, 16, 20, 7, 18, 22, 25,
++ 27, 26
++};
+
+- This program is free software; you can redistribute it and/or modify
+- it under the terms of the GNU General Public License as published by
+- the Free Software Foundation; either version 2, or (at your option)
+- any later version.
++/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
++ STATE-NUM. */
++#define YYPACT_NINF -16
++static const yysigned_char yypact[] =
++{
++ -3, -6, 5, -3, 14, -3, -3, -4, -16, -16,
++ -16, -16, -16, -16, 1, -16, 11, 6, -16, -16,
++ 4, -16, 3, -16, -16, 7, 3, 3, -16, -16,
++ -16
++};
+
+- This program is distributed in the hope that it will be useful,
+- but WITHOUT ANY WARRANTY; without even the implied warranty of
+- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- GNU General Public License for more details.
++/* YYPGOTO[NTERM-NUM]. */
++static const yysigned_char yypgoto[] =
++{
++ -16, -2, -16, -16, -16, -16, -16, -16, -16, -15,
++ -16, -16
++};
+
+- You should have received a copy of the GNU General Public License
+- along with this program; if not, write to the Free Software
+- Foundation, Inc., 59 Temple Place - Suite 330,
+- Boston, MA 02111-1307, USA. */
++/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
++ positive, shift that token. If negative, reduce the rule which
++ number is the opposite. If zero, do what YYDEFACT says.
++ If YYTABLE_NINF, syntax error. */
++#define YYTABLE_NINF -11
++static const yysigned_char yytable[] =
++{
++ 1, 10, 8, 12, 13, 14, -10, 2, 3, 23,
++ 24, 29, 30, 9, 11, 15, 17, 21, 19, 0,
++ 0, 0, 28
++};
+
+-/* As a special exception, when this file is copied by Bison into a
+- Bison output file, you may use that output file without restriction.
+- This special exception was added by the Free Software Foundation
+- in version 1.24 of Bison. */
++static const yysigned_char yycheck[] =
++{
++ 3, 3, 8, 5, 6, 9, 9, 10, 11, 6,
++ 7, 26, 27, 8, 0, 14, 5, 13, 12, -1,
++ -1, -1, 15
++};
+
+-/* This is the parser code that is written into each bison parser
+- when the %semantic_parser declaration is not specified in the grammar.
+- It was written by Richard Stallman by simplifying the hairy parser
+- used when %semantic_parser is specified. */
+-
+-#ifndef YYSTACK_USE_ALLOCA
+-#ifdef alloca
+-#define YYSTACK_USE_ALLOCA
+-#else /* alloca not defined */
+-#ifdef __GNUC__
+-#define YYSTACK_USE_ALLOCA
+-#define alloca __builtin_alloca
+-#else /* not GNU C. */
+-#if (!defined (__STDC__) && defined (sparc)) || defined (__sparc__) || defined (__sparc) || defined (__sgi) || (defined (__sun) && defined (__i386))
+-#define YYSTACK_USE_ALLOCA
+-#include <alloca.h>
+-#else /* not sparc */
+-/* We think this test detects Watcom and Microsoft C. */
+-/* This used to test MSDOS, but that is a bad idea
+- since that symbol is in the user namespace. */
+-#if (defined (_MSDOS) || defined (_MSDOS_)) && !defined (__TURBOC__)
+-#if 0 /* No need for malloc.h, which pollutes the namespace;
+- instead, just don't use alloca. */
+-#include <malloc.h>
+-#endif
+-#else /* not MSDOS, or __TURBOC__ */
+-#if defined(_AIX)
+-/* I don't know what this was needed for, but it pollutes the namespace.
+- So I turned it off. rms, 2 May 1997. */
+-/* #include <malloc.h> */
+- #pragma alloca
+-#define YYSTACK_USE_ALLOCA
+-#else /* not MSDOS, or __TURBOC__, or _AIX */
+-#if 0
+-#ifdef __hpux /* haible@ilog.fr says this works for HPUX 9.05 and up,
+- and on HPUX 10. Eventually we can turn this on. */
+-#define YYSTACK_USE_ALLOCA
+-#define alloca __builtin_alloca
+-#endif /* __hpux */
+-#endif
+-#endif /* not _AIX */
+-#endif /* not MSDOS, or __TURBOC__ */
+-#endif /* not sparc */
+-#endif /* not GNU C */
+-#endif /* alloca not defined */
+-#endif /* YYSTACK_USE_ALLOCA not defined */
++/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
++ symbol of state STATE-NUM. */
++static const unsigned char yystos[] =
++{
++ 0, 3, 10, 11, 17, 18, 19, 22, 8, 8,
++ 17, 0, 17, 17, 9, 14, 20, 5, 23, 12,
++ 21, 13, 24, 6, 7, 25, 27, 26, 15, 25,
++ 25
++};
+
+-#ifdef YYSTACK_USE_ALLOCA
+-#define YYSTACK_ALLOC alloca
+-#else
+-#define YYSTACK_ALLOC malloc
++#if ! defined (YYSIZE_T) && defined (__SIZE_TYPE__)
++# define YYSIZE_T __SIZE_TYPE__
++#endif
++#if ! defined (YYSIZE_T) && defined (size_t)
++# define YYSIZE_T size_t
++#endif
++#if ! defined (YYSIZE_T)
++# if defined (__STDC__) || defined (__cplusplus)
++# include <stddef.h> /* INFRINGES ON USER NAME SPACE */
++# define YYSIZE_T size_t
++# endif
++#endif
++#if ! defined (YYSIZE_T)
++# define YYSIZE_T unsigned int
+ #endif
+-
+-/* Note: there must be only one dollar sign in this file.
+- It is replaced by the list of actions, each action
+- as one case of the switch. */
+
+ #define yyerrok (yyerrstatus = 0)
+ #define yyclearin (yychar = YYEMPTY)
+-#define YYEMPTY -2
++#define YYEMPTY (-2)
+ #define YYEOF 0
++
+ #define YYACCEPT goto yyacceptlab
+-#define YYABORT goto yyabortlab
+-#define YYERROR goto yyerrlab1
+-/* Like YYERROR except do call yyerror.
+- This remains here temporarily to ease the
+- transition to the new meaning of YYERROR, for GCC.
++#define YYABORT goto yyabortlab
++#define YYERROR goto yyerrorlab
++
++
++/* Like YYERROR except do call yyerror. This remains here temporarily
++ to ease the transition to the new meaning of YYERROR, for GCC.
+ Once GCC version 2 has supplanted version 1, this can go. */
++
+ #define YYFAIL goto yyerrlab
++
+ #define YYRECOVERING() (!!yyerrstatus)
+-#define YYBACKUP(token, value) \
++
++#define YYBACKUP(Token, Value) \
+ do \
+ if (yychar == YYEMPTY && yylen == 1) \
+- { yychar = (token), yylval = (value); \
+- yychar1 = YYTRANSLATE (yychar); \
++ { \
++ yychar = (Token); \
++ yylval = (Value); \
++ yytoken = YYTRANSLATE (yychar); \
+ YYPOPSTACK; \
+ goto yybackup; \
+ } \
+ else \
+- { yyerror ("syntax error: cannot back up"); YYERROR; } \
++ { \
++ yyerror ("syntax error: cannot back up");\
++ YYERROR; \
++ } \
+ while (0)
+
+ #define YYTERROR 1
+ #define YYERRCODE 256
+
+-#ifndef YYPURE
+-#define YYLEX yylex()
+-#endif
++/* YYLLOC_DEFAULT -- Compute the default location (before the actions
++ are run). */
+
+-#ifdef YYPURE
+-#ifdef YYLSP_NEEDED
+-#ifdef YYLEX_PARAM
+-#define YYLEX yylex(&yylval, &yylloc, YYLEX_PARAM)
+-#else
+-#define YYLEX yylex(&yylval, &yylloc)
++#ifndef YYLLOC_DEFAULT
++# define YYLLOC_DEFAULT(Current, Rhs, N) \
++ ((Current).first_line = (Rhs)[1].first_line, \
++ (Current).first_column = (Rhs)[1].first_column, \
++ (Current).last_line = (Rhs)[N].last_line, \
++ (Current).last_column = (Rhs)[N].last_column)
+ #endif
+-#else /* not YYLSP_NEEDED */
++
++/* YYLEX -- calling `yylex' with the right arguments. */
++
+ #ifdef YYLEX_PARAM
+-#define YYLEX yylex(&yylval, YYLEX_PARAM)
++# define YYLEX yylex (YYLEX_PARAM)
+ #else
+-#define YYLEX yylex(&yylval)
+-#endif
+-#endif /* not YYLSP_NEEDED */
++# define YYLEX yylex ()
+ #endif
+
+-/* If nonreentrant, generate the variables here */
++/* Enable debugging if requested. */
++#if YYDEBUG
+
+-#ifndef YYPURE
++# ifndef YYFPRINTF
++# include <stdio.h> /* INFRINGES ON USER NAME SPACE */
++# define YYFPRINTF fprintf
++# endif
++
++# define YYDPRINTF(Args) \
++do { \
++ if (yydebug) \
++ YYFPRINTF Args; \
++} while (0)
++
++# define YYDSYMPRINT(Args) \
++do { \
++ if (yydebug) \
++ yysymprint Args; \
++} while (0)
++
++# define YYDSYMPRINTF(Title, Token, Value, Location) \
++do { \
++ if (yydebug) \
++ { \
++ YYFPRINTF (stderr, "%s ", Title); \
++ yysymprint (stderr, \
++ Token, Value); \
++ YYFPRINTF (stderr, "\n"); \
++ } \
++} while (0)
+
+-int yychar; /* the lookahead symbol */
+-YYSTYPE yylval; /* the semantic value of the */
+- /* lookahead symbol */
++/*------------------------------------------------------------------.
++| yy_stack_print -- Print the state stack from its BOTTOM up to its |
++| TOP (included). |
++`------------------------------------------------------------------*/
+
+-#ifdef YYLSP_NEEDED
+-YYLTYPE yylloc; /* location data for the lookahead */
+- /* symbol */
++#if defined (__STDC__) || defined (__cplusplus)
++static void
++yy_stack_print (short int *bottom, short int *top)
++#else
++static void
++yy_stack_print (bottom, top)
++ short int *bottom;
++ short int *top;
+ #endif
++{
++ YYFPRINTF (stderr, "Stack now");
++ for (/* Nothing. */; bottom <= top; ++bottom)
++ YYFPRINTF (stderr, " %d", *bottom);
++ YYFPRINTF (stderr, "\n");
++}
+
+-int yynerrs; /* number of parse errors so far */
+-#endif /* not YYPURE */
++# define YY_STACK_PRINT(Bottom, Top) \
++do { \
++ if (yydebug) \
++ yy_stack_print ((Bottom), (Top)); \
++} while (0)
+
+-#if YYDEBUG != 0
+-int yydebug; /* nonzero means print parse trace */
+-/* Since this is uninitialized, it does not stop multiple parsers
+- from coexisting. */
++
++/*------------------------------------------------.
++| Report that the YYRULE is going to be reduced. |
++`------------------------------------------------*/
++
++#if defined (__STDC__) || defined (__cplusplus)
++static void
++yy_reduce_print (int yyrule)
++#else
++static void
++yy_reduce_print (yyrule)
++ int yyrule;
+ #endif
++{
++ int yyi;
++ unsigned int yylno = yyrline[yyrule];
++ YYFPRINTF (stderr, "Reducing stack by rule %d (line %u), ",
++ yyrule - 1, yylno);
++ /* Print the symbols being reduced, and their result. */
++ for (yyi = yyprhs[yyrule]; 0 <= yyrhs[yyi]; yyi++)
++ YYFPRINTF (stderr, "%s ", yytname [yyrhs[yyi]]);
++ YYFPRINTF (stderr, "-> %s\n", yytname [yyr1[yyrule]]);
++}
++
++# define YY_REDUCE_PRINT(Rule) \
++do { \
++ if (yydebug) \
++ yy_reduce_print (Rule); \
++} while (0)
++
++/* Nonzero means print parse trace. It is left uninitialized so that
++ multiple parsers can coexist. */
++int yydebug;
++#else /* !YYDEBUG */
++# define YYDPRINTF(Args)
++# define YYDSYMPRINT(Args)
++# define YYDSYMPRINTF(Title, Token, Value, Location)
++# define YY_STACK_PRINT(Bottom, Top)
++# define YY_REDUCE_PRINT(Rule)
++#endif /* !YYDEBUG */
+
+-/* YYINITDEPTH indicates the initial size of the parser's stacks */
+
++/* YYINITDEPTH -- initial size of the parser's stacks. */
+ #ifndef YYINITDEPTH
+-#define YYINITDEPTH 200
++# define YYINITDEPTH 200
+ #endif
+
+-/* YYMAXDEPTH is the maximum size the stacks can grow to
+- (effective only if the built-in stack extension method is used). */
++/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only
++ if the built-in stack extension method is used).
+
+-#if YYMAXDEPTH == 0
+-#undef YYMAXDEPTH
++ Do not make this value too large; the results are undefined if
++ SIZE_MAX < YYSTACK_BYTES (YYMAXDEPTH)
++ evaluated with infinite-precision integer arithmetic. */
++
++#if defined (YYMAXDEPTH) && YYMAXDEPTH == 0
++# undef YYMAXDEPTH
+ #endif
+
+ #ifndef YYMAXDEPTH
+-#define YYMAXDEPTH 10000
++# define YYMAXDEPTH 10000
+ #endif
++
+ \f
+-/* Define __yy_memcpy. Note that the size argument
+- should be passed with type unsigned int, because that is what the non-GCC
+- definitions require. With GCC, __builtin_memcpy takes an arg
+- of type size_t, but it can handle unsigned int. */
+-
+-#if __GNUC__ > 1 /* GNU C and GNU C++ define this. */
+-#define __yy_memcpy(TO,FROM,COUNT) __builtin_memcpy(TO,FROM,COUNT)
+-#else /* not GNU C or C++ */
+-#ifndef __cplusplus
+
+-/* This is the most reliable way to avoid incompatibilities
+- in available built-in functions on various systems. */
+-static void
+-__yy_memcpy (to, from, count)
+- char *to;
+- char *from;
+- unsigned int count;
+-{
+- register char *f = from;
+- register char *t = to;
+- register int i = count;
++#if YYERROR_VERBOSE
++
++# ifndef yystrlen
++# if defined (__GLIBC__) && defined (_STRING_H)
++# define yystrlen strlen
++# else
++/* Return the length of YYSTR. */
++static YYSIZE_T
++# if defined (__STDC__) || defined (__cplusplus)
++yystrlen (const char *yystr)
++# else
++yystrlen (yystr)
++ const char *yystr;
++# endif
++{
++ register const char *yys = yystr;
++
++ while (*yys++ != '\0')
++ continue;
++
++ return yys - yystr - 1;
++}
++# endif
++# endif
++
++# ifndef yystpcpy
++# if defined (__GLIBC__) && defined (_STRING_H) && defined (_GNU_SOURCE)
++# define yystpcpy stpcpy
++# else
++/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in
++ YYDEST. */
++static char *
++# if defined (__STDC__) || defined (__cplusplus)
++yystpcpy (char *yydest, const char *yysrc)
++# else
++yystpcpy (yydest, yysrc)
++ char *yydest;
++ const char *yysrc;
++# endif
++{
++ register char *yyd = yydest;
++ register const char *yys = yysrc;
+
+- while (i-- > 0)
+- *t++ = *f++;
++ while ((*yyd++ = *yys++) != '\0')
++ continue;
++
++ return yyd - 1;
+ }
++# endif
++# endif
++
++#endif /* !YYERROR_VERBOSE */
+
+-#else /* __cplusplus */
++\f
++
++#if YYDEBUG
++/*--------------------------------.
++| Print this symbol on YYOUTPUT. |
++`--------------------------------*/
+
+-/* This is the most reliable way to avoid incompatibilities
+- in available built-in functions on various systems. */
++#if defined (__STDC__) || defined (__cplusplus)
+ static void
+-__yy_memcpy (char *to, char *from, unsigned int count)
++yysymprint (FILE *yyoutput, int yytype, YYSTYPE *yyvaluep)
++#else
++static void
++yysymprint (yyoutput, yytype, yyvaluep)
++ FILE *yyoutput;
++ int yytype;
++ YYSTYPE *yyvaluep;
++#endif
+ {
+- register char *t = to;
+- register char *f = from;
+- register int i = count;
++ /* Pacify ``unused variable'' warnings. */
++ (void) yyvaluep;
+
+- while (i-- > 0)
+- *t++ = *f++;
++ if (yytype < YYNTOKENS)
++ {
++ YYFPRINTF (yyoutput, "token %s (", yytname[yytype]);
++# ifdef YYPRINT
++ YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
++# endif
++ }
++ else
++ YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
++
++ switch (yytype)
++ {
++ default:
++ break;
++ }
++ YYFPRINTF (yyoutput, ")");
+ }
+
++#endif /* ! YYDEBUG */
++/*-----------------------------------------------.
++| Release the memory associated to this symbol. |
++`-----------------------------------------------*/
++
++#if defined (__STDC__) || defined (__cplusplus)
++static void
++yydestruct (int yytype, YYSTYPE *yyvaluep)
++#else
++static void
++yydestruct (yytype, yyvaluep)
++ int yytype;
++ YYSTYPE *yyvaluep;
+ #endif
+-#endif
++{
++ /* Pacify ``unused variable'' warnings. */
++ (void) yyvaluep;
++
++ switch (yytype)
++ {
++
++ default:
++ break;
++ }
++}
+ \f
+-#line 217 "/usr/lib/bison.simple"
+
+-/* The user can define YYPARSE_PARAM as the name of an argument to be passed
+- into yyparse. The argument should have type void *.
+- It should actually point to an object.
+- Grammar actions can access the variable by casting it
+- to the proper pointer type. */
++/* Prevent warnings from -Wmissing-prototypes. */
+
+ #ifdef YYPARSE_PARAM
+-#ifdef __cplusplus
+-#define YYPARSE_PARAM_ARG void *YYPARSE_PARAM
+-#define YYPARSE_PARAM_DECL
+-#else /* not __cplusplus */
+-#define YYPARSE_PARAM_ARG YYPARSE_PARAM
+-#define YYPARSE_PARAM_DECL void *YYPARSE_PARAM;
+-#endif /* not __cplusplus */
+-#else /* not YYPARSE_PARAM */
+-#define YYPARSE_PARAM_ARG
+-#define YYPARSE_PARAM_DECL
+-#endif /* not YYPARSE_PARAM */
++# if defined (__STDC__) || defined (__cplusplus)
++int yyparse (void *YYPARSE_PARAM);
++# else
++int yyparse ();
++# endif
++#else /* ! YYPARSE_PARAM */
++#if defined (__STDC__) || defined (__cplusplus)
++int yyparse (void);
++#else
++int yyparse ();
++#endif
++#endif /* ! YYPARSE_PARAM */
++
++
++
++/* The lookahead symbol. */
++int yychar;
++
++/* The semantic value of the lookahead symbol. */
++YYSTYPE yylval;
++
++/* Number of syntax errors so far. */
++int yynerrs;
++
++
++
++/*----------.
++| yyparse. |
++`----------*/
+
+-/* Prevent warning if -Wstrict-prototypes. */
+-#ifdef __GNUC__
+ #ifdef YYPARSE_PARAM
+-int yyparse (void *);
++# if defined (__STDC__) || defined (__cplusplus)
++int yyparse (void *YYPARSE_PARAM)
++# else
++int yyparse (YYPARSE_PARAM)
++ void *YYPARSE_PARAM;
++# endif
++#else /* ! YYPARSE_PARAM */
++#if defined (__STDC__) || defined (__cplusplus)
++int
++yyparse (void)
+ #else
+-int yyparse (void);
++int
++yyparse ()
++
+ #endif
+ #endif
+-
+-int
+-yyparse(YYPARSE_PARAM_ARG)
+- YYPARSE_PARAM_DECL
+ {
++
+ register int yystate;
+ register int yyn;
+- register short *yyssp;
++ int yyresult;
++ /* Number of tokens to shift before error messages enabled. */
++ int yyerrstatus;
++ /* Lookahead token as an internal (translated) token number. */
++ int yytoken = 0;
++
++ /* Three stacks and their tools:
++ `yyss': related to states,
++ `yyvs': related to semantic values,
++ `yyls': related to locations.
++
++ Refer to the stacks thru separate pointers, to allow yyoverflow
++ to reallocate them elsewhere. */
++
++ /* The state stack. */
++ short int yyssa[YYINITDEPTH];
++ short int *yyss = yyssa;
++ register short int *yyssp;
++
++ /* The semantic value stack. */
++ YYSTYPE yyvsa[YYINITDEPTH];
++ YYSTYPE *yyvs = yyvsa;
+ register YYSTYPE *yyvsp;
+- int yyerrstatus; /* number of tokens to shift before error messages enabled */
+- int yychar1 = 0; /* lookahead token as an internal (translated) token number */
+-
+- short yyssa[YYINITDEPTH]; /* the state stack */
+- YYSTYPE yyvsa[YYINITDEPTH]; /* the semantic value stack */
+
+- short *yyss = yyssa; /* refer to the stacks thru separate pointers */
+- YYSTYPE *yyvs = yyvsa; /* to allow yyoverflow to reallocate them elsewhere */
+
+-#ifdef YYLSP_NEEDED
+- YYLTYPE yylsa[YYINITDEPTH]; /* the location stack */
+- YYLTYPE *yyls = yylsa;
+- YYLTYPE *yylsp;
+
+-#define YYPOPSTACK (yyvsp--, yyssp--, yylsp--)
+-#else
+ #define YYPOPSTACK (yyvsp--, yyssp--)
+-#endif
+
+- int yystacksize = YYINITDEPTH;
+- int yyfree_stacks = 0;
++ YYSIZE_T yystacksize = YYINITDEPTH;
+
+-#ifdef YYPURE
+- int yychar;
+- YYSTYPE yylval;
+- int yynerrs;
+-#ifdef YYLSP_NEEDED
+- YYLTYPE yylloc;
+-#endif
+-#endif
++ /* The variables used to return semantic value and location from the
++ action routines. */
++ YYSTYPE yyval;
+
+- YYSTYPE yyval; /* the variable used to return */
+- /* semantic values from the action */
+- /* routines */
+
++ /* When reducing, the number of symbols on the RHS of the reduced
++ rule. */
+ int yylen;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Starting parse\n");
+-#endif
++ YYDPRINTF ((stderr, "Starting parse\n"));
+
+ yystate = 0;
+ yyerrstatus = 0;
+@@ -479,110 +853,97 @@
+ so that they stay on the same level as the state stack.
+ The wasted elements are never initialized. */
+
+- yyssp = yyss - 1;
++ yyssp = yyss;
+ yyvsp = yyvs;
+-#ifdef YYLSP_NEEDED
+- yylsp = yyls;
+-#endif
+
+-/* Push a new state, which is found in yystate . */
+-/* In all cases, when you get here, the value and location stacks
+- have just been pushed. so pushing a state here evens the stacks. */
+-yynewstate:
+
+- *++yyssp = yystate;
++ goto yysetstate;
+
+- if (yyssp >= yyss + yystacksize - 1)
+- {
+- /* Give user a chance to reallocate the stack */
+- /* Use copies of these so that the &'s don't force the real ones into memory. */
+- YYSTYPE *yyvs1 = yyvs;
+- short *yyss1 = yyss;
+-#ifdef YYLSP_NEEDED
+- YYLTYPE *yyls1 = yyls;
+-#endif
++/*------------------------------------------------------------.
++| yynewstate -- Push a new state, which is found in yystate. |
++`------------------------------------------------------------*/
++ yynewstate:
++ /* In all cases, when you get here, the value and location stacks
++ have just been pushed. so pushing a state here evens the stacks.
++ */
++ yyssp++;
+
++ yysetstate:
++ *yyssp = yystate;
++
++ if (yyss + yystacksize - 1 <= yyssp)
++ {
+ /* Get the current used size of the three stacks, in elements. */
+- int size = yyssp - yyss + 1;
++ YYSIZE_T yysize = yyssp - yyss + 1;
+
+ #ifdef yyoverflow
+- /* Each stack pointer address is followed by the size of
+- the data in use in that stack, in bytes. */
+-#ifdef YYLSP_NEEDED
+- /* This used to be a conditional around just the two extra args,
+- but that might be undefined if yyoverflow is a macro. */
+- yyoverflow("parser stack overflow",
+- &yyss1, size * sizeof (*yyssp),
+- &yyvs1, size * sizeof (*yyvsp),
+- &yyls1, size * sizeof (*yylsp),
+- &yystacksize);
+-#else
+- yyoverflow("parser stack overflow",
+- &yyss1, size * sizeof (*yyssp),
+- &yyvs1, size * sizeof (*yyvsp),
+- &yystacksize);
+-#endif
+-
+- yyss = yyss1; yyvs = yyvs1;
+-#ifdef YYLSP_NEEDED
+- yyls = yyls1;
+-#endif
++ {
++ /* Give user a chance to reallocate the stack. Use copies of
++ these so that the &'s don't force the real ones into
++ memory. */
++ YYSTYPE *yyvs1 = yyvs;
++ short int *yyss1 = yyss;
++
++
++ /* Each stack pointer address is followed by the size of the
++ data in use in that stack, in bytes. This used to be a
++ conditional around just the two extra args, but that might
++ be undefined if yyoverflow is a macro. */
++ yyoverflow ("parser stack overflow",
++ &yyss1, yysize * sizeof (*yyssp),
++ &yyvs1, yysize * sizeof (*yyvsp),
++
++ &yystacksize);
++
++ yyss = yyss1;
++ yyvs = yyvs1;
++ }
+ #else /* no yyoverflow */
++# ifndef YYSTACK_RELOCATE
++ goto yyoverflowlab;
++# else
+ /* Extend the stack our own way. */
+- if (yystacksize >= YYMAXDEPTH)
+- {
+- yyerror("parser stack overflow");
+- if (yyfree_stacks)
+- {
+- free (yyss);
+- free (yyvs);
+-#ifdef YYLSP_NEEDED
+- free (yyls);
+-#endif
+- }
+- return 2;
+- }
++ if (YYMAXDEPTH <= yystacksize)
++ goto yyoverflowlab;
+ yystacksize *= 2;
+- if (yystacksize > YYMAXDEPTH)
++ if (YYMAXDEPTH < yystacksize)
+ yystacksize = YYMAXDEPTH;
+-#ifndef YYSTACK_USE_ALLOCA
+- yyfree_stacks = 1;
+-#endif
+- yyss = (short *) YYSTACK_ALLOC (yystacksize * sizeof (*yyssp));
+- __yy_memcpy ((char *)yyss, (char *)yyss1,
+- size * (unsigned int) sizeof (*yyssp));
+- yyvs = (YYSTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yyvsp));
+- __yy_memcpy ((char *)yyvs, (char *)yyvs1,
+- size * (unsigned int) sizeof (*yyvsp));
+-#ifdef YYLSP_NEEDED
+- yyls = (YYLTYPE *) YYSTACK_ALLOC (yystacksize * sizeof (*yylsp));
+- __yy_memcpy ((char *)yyls, (char *)yyls1,
+- size * (unsigned int) sizeof (*yylsp));
+-#endif
++
++ {
++ short int *yyss1 = yyss;
++ union yyalloc *yyptr =
++ (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
++ if (! yyptr)
++ goto yyoverflowlab;
++ YYSTACK_RELOCATE (yyss);
++ YYSTACK_RELOCATE (yyvs);
++
++# undef YYSTACK_RELOCATE
++ if (yyss1 != yyssa)
++ YYSTACK_FREE (yyss1);
++ }
++# endif
+ #endif /* no yyoverflow */
+
+- yyssp = yyss + size - 1;
+- yyvsp = yyvs + size - 1;
+-#ifdef YYLSP_NEEDED
+- yylsp = yyls + size - 1;
+-#endif
++ yyssp = yyss + yysize - 1;
++ yyvsp = yyvs + yysize - 1;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Stack size increased to %d\n", yystacksize);
+-#endif
+
+- if (yyssp >= yyss + yystacksize - 1)
++ YYDPRINTF ((stderr, "Stack size increased to %lu\n",
++ (unsigned long int) yystacksize));
++
++ if (yyss + yystacksize - 1 <= yyssp)
+ YYABORT;
+ }
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Entering state %d\n", yystate);
+-#endif
++ YYDPRINTF ((stderr, "Entering state %d\n", yystate));
+
+ goto yybackup;
+- yybackup:
++
++/*-----------.
++| yybackup. |
++`-----------*/
++yybackup:
+
+ /* Do appropriate processing given the current state. */
+ /* Read a lookahead token if we need one and don't already have one. */
+@@ -591,194 +952,167 @@
+ /* First try to decide what to do without reference to lookahead token. */
+
+ yyn = yypact[yystate];
+- if (yyn == YYFLAG)
++ if (yyn == YYPACT_NINF)
+ goto yydefault;
+
+ /* Not known => get a lookahead token if don't already have one. */
+
+- /* yychar is either YYEMPTY or YYEOF
+- or a valid token in external form. */
+-
++ /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */
+ if (yychar == YYEMPTY)
+ {
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Reading a token: ");
+-#endif
++ YYDPRINTF ((stderr, "Reading a token: "));
+ yychar = YYLEX;
+ }
+
+- /* Convert token to internal form (in yychar1) for indexing tables with */
+-
+- if (yychar <= 0) /* This means end of input. */
++ if (yychar <= YYEOF)
+ {
+- yychar1 = 0;
+- yychar = YYEOF; /* Don't call YYLEX any more */
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Now at end of input.\n");
+-#endif
++ yychar = yytoken = YYEOF;
++ YYDPRINTF ((stderr, "Now at end of input.\n"));
+ }
+ else
+ {
+- yychar1 = YYTRANSLATE(yychar);
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- fprintf (stderr, "Next token is %d (%s", yychar, yytname[yychar1]);
+- /* Give the individual parser a way to print the precise meaning
+- of a token, for further debugging info. */
+-#ifdef YYPRINT
+- YYPRINT (stderr, yychar, yylval);
+-#endif
+- fprintf (stderr, ")\n");
+- }
+-#endif
++ yytoken = YYTRANSLATE (yychar);
++ YYDSYMPRINTF ("Next token is", yytoken, &yylval, &yylloc);
+ }
+
+- yyn += yychar1;
+- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != yychar1)
++ /* If the proper action on seeing token YYTOKEN is to reduce or to
++ detect an error, take that action. */
++ yyn += yytoken;
++ if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken)
+ goto yydefault;
+-
+ yyn = yytable[yyn];
+-
+- /* yyn is what to do for this token type in this state.
+- Negative => reduce, -yyn is rule number.
+- Positive => shift, yyn is new state.
+- New state is final state => don't bother to shift,
+- just return success.
+- 0, or most negative number => error. */
+-
+- if (yyn < 0)
++ if (yyn <= 0)
+ {
+- if (yyn == YYFLAG)
++ if (yyn == 0 || yyn == YYTABLE_NINF)
+ goto yyerrlab;
+ yyn = -yyn;
+ goto yyreduce;
+ }
+- else if (yyn == 0)
+- goto yyerrlab;
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+ /* Shift the lookahead token. */
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Shifting token %d (%s), ", yychar, yytname[yychar1]);
+-#endif
++ YYDPRINTF ((stderr, "Shifting token %s, ", yytname[yytoken]));
+
+ /* Discard the token being shifted unless it is eof. */
+ if (yychar != YYEOF)
+ yychar = YYEMPTY;
+
+ *++yyvsp = yylval;
+-#ifdef YYLSP_NEEDED
+- *++yylsp = yylloc;
+-#endif
+
+- /* count tokens shifted since error; after three, turn off error status. */
+- if (yyerrstatus) yyerrstatus--;
++
++ /* Count tokens shifted since error; after three, turn off error
++ status. */
++ if (yyerrstatus)
++ yyerrstatus--;
+
+ yystate = yyn;
+ goto yynewstate;
+
+-/* Do the default action for the current state. */
+-yydefault:
+
++/*-----------------------------------------------------------.
++| yydefault -- do the default action for the current state. |
++`-----------------------------------------------------------*/
++yydefault:
+ yyn = yydefact[yystate];
+ if (yyn == 0)
+ goto yyerrlab;
++ goto yyreduce;
++
+
+-/* Do a reduction. yyn is the number of a rule to reduce with. */
++/*-----------------------------.
++| yyreduce -- Do a reduction. |
++`-----------------------------*/
+ yyreduce:
++ /* yyn is the number of a rule to reduce with. */
+ yylen = yyr2[yyn];
+- if (yylen > 0)
+- yyval = yyvsp[1-yylen]; /* implement default value of the action */
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- int i;
++ /* If YYLEN is nonzero, implement the default value of the action:
++ `$$ = $1'.
+
+- fprintf (stderr, "Reducing via rule %d (line %d), ",
+- yyn, yyrline[yyn]);
++ Otherwise, the following line sets YYVAL to garbage.
++ This behavior is undocumented and Bison
++ users should not rely upon it. Assigning to YYVAL
++ unconditionally makes the parser a bit smaller, and it avoids a
++ GCC warning that YYVAL may be used uninitialized. */
++ yyval = yyvsp[1-yylen];
+
+- /* Print the symbols being reduced, and their result. */
+- for (i = yyprhs[yyn]; yyrhs[i] > 0; i++)
+- fprintf (stderr, "%s ", yytname[yyrhs[i]]);
+- fprintf (stderr, " -> %s\n", yytname[yyr1[yyn]]);
+- }
+-#endif
+
+-
+- switch (yyn) {
+-
+-case 4:
+-#line 47 "cfg_y.y"
+-{
++ YY_REDUCE_PRINT (yyn);
++ switch (yyn)
++ {
++ case 5:
++#line 50 "cfg_y.y"
++ {
+ control_init(yyvsp[-1].str);
+- ;
+- break;}
+-case 5:
+-#line 54 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 6:
++#line 57 "cfg_y.y"
++ {
+ fab_option(yyvsp[-1].str,yyvsp[0].str);
+- ;
+- break;}
+-case 6:
+-#line 61 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 7:
++#line 64 "cfg_y.y"
++ {
+ itf = 0;
+- ;
+- break;}
+-case 7:
+-#line 65 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 8:
++#line 68 "cfg_y.y"
++ {
+ char *tmp;
+
+ tmp = strdup(yyvsp[-3].str);
+ if (!tmp) yyerror(strerror(errno));
+ sig = sig_vc(yyvsp[-4].str,tmp,itf);
+- ;
+- break;}
+-case 9:
+-#line 77 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 10:
++#line 80 "cfg_y.y"
++ {
+ yyval.str = NULL;
+- ;
+- break;}
+-case 10:
+-#line 81 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 11:
++#line 84 "cfg_y.y"
++ {
+ yyval.str = strdup(yyvsp[0].str);
+ if (!yyval.str) yyerror(strerror(errno));
+- ;
+- break;}
+-case 12:
+-#line 89 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 13:
++#line 92 "cfg_y.y"
++ {
+ itf = yyvsp[0].num;
+- ;
+- break;}
+-case 14:
+-#line 96 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 15:
++#line 99 "cfg_y.y"
++ {
+ sig->pvc = yyvsp[0].pvc;
+- ;
+- break;}
+-case 17:
+-#line 104 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 18:
++#line 107 "cfg_y.y"
++ {
+ put_route(NULL,0,sig);
+- ;
+- break;}
+-case 19:
+-#line 112 "cfg_y.y"
+-{
++ }
++ break;
++
++ case 20:
++#line 115 "cfg_y.y"
++ {
+ struct sockaddr_atmsvc addr;
+ char *mask;
+
+@@ -790,228 +1124,236 @@
+ return;
+ }
+ put_route(&addr,mask ? strtol(mask,NULL,10) : INT_MAX,sig);
+- ;
+- break;}
+-}
+- /* the action file gets copied in in place of this dollarsign */
+-#line 543 "/usr/lib/bison.simple"
++ }
++ break;
++
++
++ }
++
++/* Line 1010 of yacc.c. */
++#line 1135 "y.tab.c"
+ \f
+ yyvsp -= yylen;
+ yyssp -= yylen;
+-#ifdef YYLSP_NEEDED
+- yylsp -= yylen;
+-#endif
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- short *ssp1 = yyss - 1;
+- fprintf (stderr, "state stack now");
+- while (ssp1 != yyssp)
+- fprintf (stderr, " %d", *++ssp1);
+- fprintf (stderr, "\n");
+- }
+-#endif
++
++ YY_STACK_PRINT (yyss, yyssp);
+
+ *++yyvsp = yyval;
+
+-#ifdef YYLSP_NEEDED
+- yylsp++;
+- if (yylen == 0)
+- {
+- yylsp->first_line = yylloc.first_line;
+- yylsp->first_column = yylloc.first_column;
+- yylsp->last_line = (yylsp-1)->last_line;
+- yylsp->last_column = (yylsp-1)->last_column;
+- yylsp->text = 0;
+- }
+- else
+- {
+- yylsp->last_line = (yylsp+yylen-1)->last_line;
+- yylsp->last_column = (yylsp+yylen-1)->last_column;
+- }
+-#endif
+
+- /* Now "shift" the result of the reduction.
+- Determine what state that goes to,
+- based on the state we popped back to
+- and the rule number reduced by. */
++ /* Now `shift' the result of the reduction. Determine what state
++ that goes to, based on the state we popped back to and the rule
++ number reduced by. */
+
+ yyn = yyr1[yyn];
+
+- yystate = yypgoto[yyn - YYNTBASE] + *yyssp;
+- if (yystate >= 0 && yystate <= YYLAST && yycheck[yystate] == *yyssp)
++ yystate = yypgoto[yyn - YYNTOKENS] + *yyssp;
++ if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp)
+ yystate = yytable[yystate];
+ else
+- yystate = yydefgoto[yyn - YYNTBASE];
++ yystate = yydefgoto[yyn - YYNTOKENS];
+
+ goto yynewstate;
+
+-yyerrlab: /* here on detecting error */
+
+- if (! yyerrstatus)
+- /* If not already recovering from an error, report this error. */
++/*------------------------------------.
++| yyerrlab -- here on detecting error |
++`------------------------------------*/
++yyerrlab:
++ /* If not already recovering from an error, report this error. */
++ if (!yyerrstatus)
+ {
+ ++yynerrs;
+-
+-#ifdef YYERROR_VERBOSE
++#if YYERROR_VERBOSE
+ yyn = yypact[yystate];
+
+- if (yyn > YYFLAG && yyn < YYLAST)
++ if (YYPACT_NINF < yyn && yyn < YYLAST)
+ {
+- int size = 0;
+- char *msg;
+- int x, count;
+-
+- count = 0;
+- /* Start X at -yyn if nec to avoid negative indexes in yycheck. */
+- for (x = (yyn < 0 ? -yyn : 0);
+- x < (sizeof(yytname) / sizeof(char *)); x++)
+- if (yycheck[x + yyn] == x)
+- size += strlen(yytname[x]) + 15, count++;
+- msg = (char *) malloc(size + 15);
+- if (msg != 0)
++ YYSIZE_T yysize = 0;
++ int yytype = YYTRANSLATE (yychar);
++ const char* yyprefix;
++ char *yymsg;
++ int yyx;
++
++ /* Start YYX at -YYN if negative to avoid negative indexes in
++ YYCHECK. */
++ int yyxbegin = yyn < 0 ? -yyn : 0;
++
++ /* Stay within bounds of both yycheck and yytname. */
++ int yychecklim = YYLAST - yyn;
++ int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS;
++ int yycount = 0;
++
++ yyprefix = ", expecting ";
++ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
++ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
++ {
++ yysize += yystrlen (yyprefix) + yystrlen (yytname [yyx]);
++ yycount += 1;
++ if (yycount == 5)
++ {
++ yysize = 0;
++ break;
++ }
++ }
++ yysize += (sizeof ("syntax error, unexpected ")
++ + yystrlen (yytname[yytype]));
++ yymsg = (char *) YYSTACK_ALLOC (yysize);
++ if (yymsg != 0)
+ {
+- strcpy(msg, "parse error");
++ char *yyp = yystpcpy (yymsg, "syntax error, unexpected ");
++ yyp = yystpcpy (yyp, yytname[yytype]);
+
+- if (count < 5)
++ if (yycount < 5)
+ {
+- count = 0;
+- for (x = (yyn < 0 ? -yyn : 0);
+- x < (sizeof(yytname) / sizeof(char *)); x++)
+- if (yycheck[x + yyn] == x)
++ yyprefix = ", expecting ";
++ for (yyx = yyxbegin; yyx < yyxend; ++yyx)
++ if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR)
+ {
+- strcat(msg, count == 0 ? ", expecting `" : " or `");
+- strcat(msg, yytname[x]);
+- strcat(msg, "'");
+- count++;
++ yyp = yystpcpy (yyp, yyprefix);
++ yyp = yystpcpy (yyp, yytname[yyx]);
++ yyprefix = " or ";
+ }
+ }
+- yyerror(msg);
+- free(msg);
++ yyerror (yymsg);
++ YYSTACK_FREE (yymsg);
+ }
+ else
+- yyerror ("parse error; also virtual memory exceeded");
++ yyerror ("syntax error; also virtual memory exhausted");
+ }
+ else
+ #endif /* YYERROR_VERBOSE */
+- yyerror("parse error");
++ yyerror ("syntax error");
+ }
+
+- goto yyerrlab1;
+-yyerrlab1: /* here on error raised explicitly by an action */
++
+
+ if (yyerrstatus == 3)
+ {
+- /* if just tried and failed to reuse lookahead token after an error, discard it. */
++ /* If just tried and failed to reuse lookahead token after an
++ error, discard it. */
+
+- /* return failure if at end of input */
+- if (yychar == YYEOF)
+- YYABORT;
+-
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Discarding token %d (%s).\n", yychar, yytname[yychar1]);
+-#endif
++ if (yychar <= YYEOF)
++ {
++ /* If at end of input, pop the error token,
++ then the rest of the stack, then return failure. */
++ if (yychar == YYEOF)
++ for (;;)
++ {
++ YYPOPSTACK;
++ if (yyssp == yyss)
++ YYABORT;
++ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
++ yydestruct (yystos[*yyssp], yyvsp);
++ }
++ }
++ else
++ {
++ YYDSYMPRINTF ("Error: discarding", yytoken, &yylval, &yylloc);
++ yydestruct (yytoken, &yylval);
++ yychar = YYEMPTY;
+
+- yychar = YYEMPTY;
++ }
+ }
+
+- /* Else will try to reuse lookahead token
+- after shifting the error token. */
+-
+- yyerrstatus = 3; /* Each real token shifted decrements this */
++ /* Else will try to reuse lookahead token after shifting the error
++ token. */
++ goto yyerrlab1;
+
+- goto yyerrhandle;
+
+-yyerrdefault: /* current state does not do anything special for the error token. */
++/*---------------------------------------------------.
++| yyerrorlab -- error raised explicitly by YYERROR. |
++`---------------------------------------------------*/
++yyerrorlab:
+
+-#if 0
+- /* This is wrong; only states that explicitly want error tokens
+- should shift them. */
+- yyn = yydefact[yystate]; /* If its default is to accept any token, ok. Otherwise pop it.*/
+- if (yyn) goto yydefault;
++#ifdef __GNUC__
++ /* Pacify GCC when the user code never invokes YYERROR and the label
++ yyerrorlab therefore never appears in user code. */
++ if (0)
++ goto yyerrorlab;
+ #endif
+
+-yyerrpop: /* pop the current state because it cannot handle the error token */
+-
+- if (yyssp == yyss) YYABORT;
+- yyvsp--;
+- yystate = *--yyssp;
+-#ifdef YYLSP_NEEDED
+- yylsp--;
+-#endif
++ yyvsp -= yylen;
++ yyssp -= yylen;
++ yystate = *yyssp;
++ goto yyerrlab1;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- {
+- short *ssp1 = yyss - 1;
+- fprintf (stderr, "Error: state stack now");
+- while (ssp1 != yyssp)
+- fprintf (stderr, " %d", *++ssp1);
+- fprintf (stderr, "\n");
+- }
+-#endif
+
+-yyerrhandle:
++/*-------------------------------------------------------------.
++| yyerrlab1 -- common code for both syntax error and YYERROR. |
++`-------------------------------------------------------------*/
++yyerrlab1:
++ yyerrstatus = 3; /* Each real token shifted decrements this. */
+
+- yyn = yypact[yystate];
+- if (yyn == YYFLAG)
+- goto yyerrdefault;
++ for (;;)
++ {
++ yyn = yypact[yystate];
++ if (yyn != YYPACT_NINF)
++ {
++ yyn += YYTERROR;
++ if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR)
++ {
++ yyn = yytable[yyn];
++ if (0 < yyn)
++ break;
++ }
++ }
+
+- yyn += YYTERROR;
+- if (yyn < 0 || yyn > YYLAST || yycheck[yyn] != YYTERROR)
+- goto yyerrdefault;
++ /* Pop the current state because it cannot handle the error token. */
++ if (yyssp == yyss)
++ YYABORT;
+
+- yyn = yytable[yyn];
+- if (yyn < 0)
+- {
+- if (yyn == YYFLAG)
+- goto yyerrpop;
+- yyn = -yyn;
+- goto yyreduce;
++ YYDSYMPRINTF ("Error: popping", yystos[*yyssp], yyvsp, yylsp);
++ yydestruct (yystos[yystate], yyvsp);
++ YYPOPSTACK;
++ yystate = *yyssp;
++ YY_STACK_PRINT (yyss, yyssp);
+ }
+- else if (yyn == 0)
+- goto yyerrpop;
+
+ if (yyn == YYFINAL)
+ YYACCEPT;
+
+-#if YYDEBUG != 0
+- if (yydebug)
+- fprintf(stderr, "Shifting error token, ");
+-#endif
++ YYDPRINTF ((stderr, "Shifting error token, "));
+
+ *++yyvsp = yylval;
+-#ifdef YYLSP_NEEDED
+- *++yylsp = yylloc;
+-#endif
++
+
+ yystate = yyn;
+ goto yynewstate;
+
+- yyacceptlab:
+- /* YYACCEPT comes here. */
+- if (yyfree_stacks)
+- {
+- free (yyss);
+- free (yyvs);
+-#ifdef YYLSP_NEEDED
+- free (yyls);
+-#endif
+- }
+- return 0;
+
+- yyabortlab:
+- /* YYABORT comes here. */
+- if (yyfree_stacks)
+- {
+- free (yyss);
+- free (yyvs);
+-#ifdef YYLSP_NEEDED
+- free (yyls);
++/*-------------------------------------.
++| yyacceptlab -- YYACCEPT comes here. |
++`-------------------------------------*/
++yyacceptlab:
++ yyresult = 0;
++ goto yyreturn;
++
++/*-----------------------------------.
++| yyabortlab -- YYABORT comes here. |
++`-----------------------------------*/
++yyabortlab:
++ yyresult = 1;
++ goto yyreturn;
++
++#ifndef yyoverflow
++/*----------------------------------------------.
++| yyoverflowlab -- parser overflow comes here. |
++`----------------------------------------------*/
++yyoverflowlab:
++ yyerror ("parser stack overflow");
++ yyresult = 2;
++ /* Fall through. */
++#endif
++
++yyreturn:
++#ifndef yyoverflow
++ if (yyss != yyssa)
++ YYSTACK_FREE (yyss);
+ #endif
+- }
+- return 1;
++ return yyresult;
+ }
+-#line 126 "cfg_y.y"
++
++
++
+--- linux-atm-2.4.1.orig/src/switch/cfg_y.y
++++ linux-atm-2.4.1/src/switch/cfg_y.y
+@@ -10,6 +10,7 @@
+ #include <string.h>
+ #include <errno.h>
+ #include <limits.h>
++#include <stdlib.h>
+
+ #include "atm.h"
+
+@@ -19,6 +20,8 @@
+ #include "swc.h"
+
+
++extern void yyerror(const char *s);
++
+ static int itf;
+ static SIGNALING_ENTITY *sig;
+
+--- linux-atm-2.4.1.orig/src/switch/cfg_y.h
++++ linux-atm-2.4.1/src/switch/cfg_y.h
+@@ -1,19 +1,77 @@
+-typedef union {
++/* A Bison parser, made by GNU Bison 1.875d. */
++
++/* Skeleton parser for Yacc-like parsing with Bison,
++ Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2, or (at your option)
++ any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 59 Temple Place - Suite 330,
++ Boston, MA 02111-1307, USA. */
++
++/* As a special exception, when this file is copied by Bison into a
++ Bison output file, you may use that output file without restriction.
++ This special exception was added by the Free Software Foundation
++ in version 1.24 of Bison. */
++
++/* Tokens. */
++#ifndef YYTOKENTYPE
++# define YYTOKENTYPE
++ /* Put the tokens into the symbol table, so that GDB and other debuggers
++ know about them. */
++ enum yytokentype {
++ TOK_COMMAND = 258,
++ TOK_VPCI = 259,
++ TOK_ITF = 260,
++ TOK_DEFAULT = 261,
++ TOK_ROUTE = 262,
++ TOK_STR = 263,
++ TOK_SOCKET = 264,
++ TOK_OPTION = 265,
++ TOK_CONTROL = 266,
++ TOK_NUM = 267,
++ TOK_PVC = 268
++ };
++#endif
++#define TOK_COMMAND 258
++#define TOK_VPCI 259
++#define TOK_ITF 260
++#define TOK_DEFAULT 261
++#define TOK_ROUTE 262
++#define TOK_STR 263
++#define TOK_SOCKET 264
++#define TOK_OPTION 265
++#define TOK_CONTROL 266
++#define TOK_NUM 267
++#define TOK_PVC 268
++
++
++
++
++#if ! defined (YYSTYPE) && ! defined (YYSTYPE_IS_DECLARED)
++#line 30 "cfg_y.y"
++typedef union YYSTYPE {
+ int num;
+ char *str;
+ struct sockaddr_atmpvc pvc;
+ } YYSTYPE;
+-#define TOK_COMMAND 257
+-#define TOK_VPCI 258
+-#define TOK_ITF 259
+-#define TOK_DEFAULT 260
+-#define TOK_ROUTE 261
+-#define TOK_STR 262
+-#define TOK_SOCKET 263
+-#define TOK_OPTION 264
+-#define TOK_CONTROL 265
+-#define TOK_NUM 266
+-#define TOK_PVC 267
+-
++/* Line 1285 of yacc.c. */
++#line 69 "y.tab.h"
++# define yystype YYSTYPE /* obsolescent; will be withdrawn */
++# define YYSTYPE_IS_DECLARED 1
++# define YYSTYPE_IS_TRIVIAL 1
++#endif
+
+ extern YYSTYPE yylval;
++
++
++
+--- linux-atm-2.4.1.orig/src/switch/debug/Makefile.in
++++ linux-atm-2.4.1/src/switch/debug/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -90,8 +90,7 @@
+ INCLUDES = -I$(top_builddir)/src/qgen
+
+ sw_debug_SOURCES = debug.c
+-sw_debug_XTRAS = $(top_builddir)/src/switch/libsw.a \
+- $(top_builddir)/src/lib/libatm.la
++sw_debug_XTRAS = $(top_builddir)/src/switch/libsw.a $(top_builddir)/src/lib/libatm.la
+
+ sw_debug_LDADD = $(sw_debug_XTRAS) -lfl
+
+@@ -121,8 +120,9 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/debug.P
+ SOURCES = $(sw_debug_SOURCES)
+ OBJECTS = $(sw_debug_OBJECTS)
+
+@@ -130,9 +130,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/switch/debug/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/switch/debug/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -146,9 +146,6 @@
+
+ maintainer-clean-noinstPROGRAMS:
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -171,9 +168,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -212,7 +206,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -228,6 +222,11 @@
+ subdir = src/switch/debug
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/switch/debug/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -238,11 +237,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-debug.o: debug.c ../../../config.h ../../../src/include/atm.h \
+- ../../../src/include/stdint.h ../../../src/include/atmd.h \
+- ../../../src/qgen/uni.h ../fab.h ../proto.h \
+- ../../../src/include/atmsap.h ../sig.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -279,27 +305,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-noinstPROGRAMS distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-noinstPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -310,12 +336,14 @@
+ mostlyclean-compile distclean-compile clean-compile \
+ maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+ clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/switch/debug/debug.c
++++ linux-atm-2.4.1/src/switch/debug/debug.c
+@@ -43,7 +43,7 @@
+
+ void fab_init(CALL *call)
+ {
+- PRV(call) = alloc_t(FAB);
++ call->fab = alloc_t(FAB);
+ PRV(call)->next = calls;
+ calls = call;
+ }
+@@ -59,7 +59,7 @@
+ diag(COMPONENT,DIAG_FATAL,"fab_destroy: call %p not found",call);
+ *walk = PRV(call)->next;
+ free(PRV(call));
+- PRV(call) = NULL;
++ call->fab = NULL;
+ }
+
+
+--- linux-atm-2.4.1.orig/src/switch/tcp/Makefile.in
++++ linux-atm-2.4.1/src/switch/tcp/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -90,8 +90,7 @@
+ INCLUDES = -I$(top_builddir)/src/qgen
+
+ sw_tcp_SOURCES = tcpsw.c
+-sw_tcp_XTRAS = $(top_builddir)/src/switch/libsw.a \
+- $(top_builddir)/src/lib/libatm.la
++sw_tcp_XTRAS = $(top_builddir)/src/switch/libsw.a $(top_builddir)/src/lib/libatm.la
+
+ sw_tcp_LDADD = $(sw_tcp_XTRAS) -lfl
+ sw_tcp_DEPENDENCIES = $(sw_tcp_XTRAS)
+@@ -120,8 +119,9 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
++DEP_FILES = .deps/tcpsw.P
+ SOURCES = $(sw_tcp_SOURCES)
+ OBJECTS = $(sw_tcp_OBJECTS)
+
+@@ -129,9 +129,9 @@
+ .SUFFIXES:
+ .SUFFIXES: .S .c .lo .o .obj .s
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/switch/tcp/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/switch/tcp/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -145,9 +145,6 @@
+
+ maintainer-clean-noinstPROGRAMS:
+
+-.c.o:
+- $(COMPILE) -c $<
+-
+ # FIXME: We should only use cygpath when building on Windows,
+ # and only if it is available.
+ .c.obj:
+@@ -170,9 +167,6 @@
+
+ maintainer-clean-compile:
+
+-.c.lo:
+- $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+-
+ .s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+@@ -211,7 +205,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -227,6 +221,11 @@
+ subdir = src/switch/tcp
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/switch/tcp/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+@@ -237,11 +236,38 @@
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+-tcpsw.o: tcpsw.c ../../../config.h ../../../src/include/stdint.h \
+- ../../../src/include/atm.h ../../../src/include/atmd.h \
+- ../../../src/qgen/uni.h ../fab.h ../proto.h \
+- ../../../src/include/atmsap.h ../sig.h ../dispatch.h ../swc.h
+
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
+ info-am:
+ info: info-am
+ dvi-am:
+@@ -278,27 +304,27 @@
+
+ maintainer-clean-generic:
+ mostlyclean-am: mostlyclean-noinstPROGRAMS mostlyclean-compile \
+- mostlyclean-libtool mostlyclean-tags \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
+
+ mostlyclean: mostlyclean-am
+
+ clean-am: clean-noinstPROGRAMS clean-compile clean-libtool clean-tags \
+- clean-generic mostlyclean-am
++ clean-depend clean-generic mostlyclean-am
+
+ clean: clean-am
+
+ distclean-am: distclean-noinstPROGRAMS distclean-compile \
+- distclean-libtool distclean-tags distclean-generic \
+- clean-am
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
+ -rm -f libtool
+
+ distclean: distclean-am
+
+ maintainer-clean-am: maintainer-clean-noinstPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+- maintainer-clean-tags maintainer-clean-generic \
+- distclean-am
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+@@ -309,12 +335,14 @@
+ mostlyclean-compile distclean-compile clean-compile \
+ maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+ clean-libtool maintainer-clean-libtool tags mostlyclean-tags \
+-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
+-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+-install-exec install-data-am install-data install-am install \
+-uninstall-am uninstall all-redirect all-am all installdirs \
+-mostlyclean-generic distclean-generic clean-generic \
+-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
+
+
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+--- linux-atm-2.4.1.orig/src/switch/tcp/tcpsw.c
++++ linux-atm-2.4.1/src/switch/tcp/tcpsw.c
+@@ -345,7 +345,7 @@
+
+ void fab_init(CALL *call)
+ {
+- PRV(call) = alloc_t(FAB);
++ call->fab = alloc_t(FAB);
+ PRV(call)->active = 0;
+ PRV(call)->next = calls;
+ calls = call;
+@@ -362,7 +362,7 @@
+ diag(COMPONENT,DIAG_FATAL,"fab_destroy: call %p not found",call);
+ *walk = PRV(call)->next;
+ free(PRV(call));
+- PRV(call) = NULL;
++ call->fab = NULL;
+ }
+
+
+--- linux-atm-2.4.1.orig/src/config/Makefile.in
++++ linux-atm-2.4.1/src/config/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -96,14 +96,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/config/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/config/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -186,7 +186,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -202,6 +202,11 @@
+ subdir = src/config
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/config/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/src/config/init-redhat/Makefile.in
++++ linux-atm-2.4.1/src/config/init-redhat/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -94,14 +94,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/config/init-redhat/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/config/init-redhat/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -114,6 +114,11 @@
+ subdir = src/config/init-redhat
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/config/init-redhat/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/src/extra/Makefile.in
++++ linux-atm-2.4.1/src/extra/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -96,14 +96,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/extra/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/extra/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -188,7 +188,7 @@
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+- || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+ mostlyclean-tags:
+
+@@ -204,6 +204,11 @@
+ subdir = src/extra
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/extra/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/src/extra/ANS/Makefile.in
++++ linux-atm-2.4.1/src/extra/ANS/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -94,14 +94,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps src/extra/ANS/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/extra/ANS/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -114,6 +114,11 @@
+ subdir = src/extra/ANS
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/extra/ANS/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/src/br2684/Makefile.am
++++ linux-atm-2.4.1/src/br2684/Makefile.am
+@@ -0,0 +1,10 @@
++sbin_PROGRAMS = br2684ctl
++
++LDADD = $(top_builddir)/src/lib/libatm.la
++
++br2684ctl_SOURCES = br2684ctl.c
++
++man_MANS = br2684ctl.8
++
++EXTRA_DIST = $(man_MANS) USAGE.br2684
++
+--- linux-atm-2.4.1.orig/src/br2684/Makefile.in
++++ linux-atm-2.4.1/src/br2684/Makefile.in
+@@ -0,0 +1,418 @@
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
++
++# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
++# This Makefile.in is free software; the Free Software Foundation
++# gives unlimited permission to copy and/or distribute it,
++# with or without modifications, as long as this notice is preserved.
++
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
++# PARTICULAR PURPOSE.
++
++
++SHELL = @SHELL@
++
++srcdir = @srcdir@
++top_srcdir = @top_srcdir@
++VPATH = @srcdir@
++prefix = @prefix@
++exec_prefix = @exec_prefix@
++
++bindir = @bindir@
++sbindir = @sbindir@
++libexecdir = @libexecdir@
++datadir = @datadir@
++sysconfdir = @sysconfdir@
++sharedstatedir = @sharedstatedir@
++localstatedir = @localstatedir@
++libdir = @libdir@
++infodir = @infodir@
++mandir = @mandir@
++includedir = @includedir@
++oldincludedir = /usr/include
++
++DESTDIR =
++
++pkgdatadir = $(datadir)/@PACKAGE@
++pkglibdir = $(libdir)/@PACKAGE@
++pkgincludedir = $(includedir)/@PACKAGE@
++
++top_builddir = ../..
++
++ACLOCAL = @ACLOCAL@
++AUTOCONF = @AUTOCONF@
++AUTOMAKE = @AUTOMAKE@
++AUTOHEADER = @AUTOHEADER@
++
++INSTALL = @INSTALL@
++INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
++INSTALL_DATA = @INSTALL_DATA@
++INSTALL_SCRIPT = @INSTALL_SCRIPT@
++transform = @program_transform_name@
++
++NORMAL_INSTALL = :
++PRE_INSTALL = :
++POST_INSTALL = :
++NORMAL_UNINSTALL = :
++PRE_UNINSTALL = :
++POST_UNINSTALL = :
++host_alias = @host_alias@
++host_triplet = @host@
++AR = @AR@
++AS = @AS@
++CC = /usr/src/openwrt/staging_dir_mipsel/bin/mipsel-linux-gcc
++CXX = @CXX@
++CXXCPP = @CXXCPP@
++DLLTOOL = @DLLTOOL@
++ECHO = @ECHO@
++EGREP = @EGREP@
++EXEEXT = @EXEEXT@
++F77 = @F77@
++GCJ = @GCJ@
++GCJFLAGS = @GCJFLAGS@
++HAVE_LIB = @HAVE_LIB@
++LEX = @LEX@
++LIB = @LIB@
++LIBTOOL = @LIBTOOL@
++LIBTOOL_DEPS = @LIBTOOL_DEPS@
++LIBVER_AGE = @LIBVER_AGE@
++LIBVER_CURRENT = @LIBVER_CURRENT@
++LIBVER_REVISION = @LIBVER_REVISION@
++LN_S = @LN_S@
++LTLIB = @LTLIB@
++MAKEINFO = @MAKEINFO@
++OBJDUMP = @OBJDUMP@
++OBJEXT = @OBJEXT@
++PACKAGE = @PACKAGE@
++PERL = @PERL@
++RANLIB = @RANLIB@
++RC = @RC@
++STRIP = @STRIP@
++VERSION = @VERSION@
++YACC = @YACC@
++
++sbin_PROGRAMS = br2684ctl
++
++LDADD = $(top_builddir)/src/lib/libatm.la
++
++br2684ctl_SOURCES = br2684ctl.c
++
++man_MANS = br2684ctl.8
++
++EXTRA_DIST = $(man_MANS) USAGE.br2684
++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
++CONFIG_HEADER = ../../config.h
++CONFIG_CLEAN_FILES =
++sbin_PROGRAMS = br2684ctl$(EXEEXT)
++PROGRAMS = $(sbin_PROGRAMS)
++
++
++DEFS = @DEFS@ -I. -I$(srcdir) -I../..
++CPPFLAGS = @CPPFLAGS@
++LDFLAGS = @LDFLAGS@
++LIBS = @LIBS@
++br2684ctl_OBJECTS = br2684ctl.$(OBJEXT)
++br2684ctl_LDADD = $(LDADD)
++br2684ctl_DEPENDENCIES = $(top_builddir)/src/lib/libatm.la
++br2684ctl_LDFLAGS =
++CFLAGS = @CFLAGS@
++COMPILE = $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++LTCOMPILE = $(LIBTOOL) --mode=compile $(TARGET_CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
++CCLD = $(TARGET_CC)
++LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
++man8dir = $(mandir)/man8
++MANS = $(man_MANS)
++
++NROFF = nroff
++DIST_COMMON = Makefile.am Makefile.in
++
++
++DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
++
++TAR = tar
++GZIP_ENV = --best
++DEP_FILES = .deps/br2684ctl.P
++SOURCES = $(br2684ctl_SOURCES)
++OBJECTS = $(br2684ctl_OBJECTS)
++
++all: all-redirect
++.SUFFIXES:
++.SUFFIXES: .S .c .lo .o .obj .s
++$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/br2684/Makefile
++
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
++ cd $(top_builddir) \
++ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
++
++
++mostlyclean-sbinPROGRAMS:
++
++clean-sbinPROGRAMS:
++ -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS)
++
++distclean-sbinPROGRAMS:
++
++maintainer-clean-sbinPROGRAMS:
++
++install-sbinPROGRAMS: $(sbin_PROGRAMS)
++ @$(NORMAL_INSTALL)
++ $(mkinstalldirs) $(DESTDIR)$(sbindir)
++ @list='$(sbin_PROGRAMS)'; for p in $$list; do \
++ if test -f $$p; then \
++ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
++ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
++ else :; fi; \
++ done
++
++uninstall-sbinPROGRAMS:
++ @$(NORMAL_UNINSTALL)
++ list='$(sbin_PROGRAMS)'; for p in $$list; do \
++ rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
++ done
++
++# FIXME: We should only use cygpath when building on Windows,
++# and only if it is available.
++.c.obj:
++ $(COMPILE) -c `cygpath -w $<`
++
++.s.o:
++ $(COMPILE) -c $<
++
++.S.o:
++ $(COMPILE) -c $<
++
++mostlyclean-compile:
++ -rm -f *.o core *.core
++ -rm -f *.$(OBJEXT)
++
++clean-compile:
++
++distclean-compile:
++ -rm -f *.tab.c
++
++maintainer-clean-compile:
++
++.s.lo:
++ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
++
++.S.lo:
++ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
++
++mostlyclean-libtool:
++ -rm -f *.lo
++
++clean-libtool:
++ -rm -rf .libs _libs
++
++distclean-libtool:
++
++maintainer-clean-libtool:
++
++br2684ctl$(EXEEXT): $(br2684ctl_OBJECTS) $(br2684ctl_DEPENDENCIES)
++ @rm -f br2684ctl$(EXEEXT)
++ $(LINK) $(br2684ctl_LDFLAGS) $(br2684ctl_OBJECTS) $(br2684ctl_LDADD) $(LIBS)
++
++install-man8:
++ $(mkinstalldirs) $(DESTDIR)$(man8dir)
++ @list='$(man8_MANS)'; \
++ l2='$(man_MANS)'; for i in $$l2; do \
++ case "$$i" in \
++ *.8*) list="$$list $$i" ;; \
++ esac; \
++ done; \
++ for i in $$list; do \
++ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
++ else file=$$i; fi; \
++ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
++ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
++ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
++ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \
++ $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \
++ done
++
++uninstall-man8:
++ @list='$(man8_MANS)'; \
++ l2='$(man_MANS)'; for i in $$l2; do \
++ case "$$i" in \
++ *.8*) list="$$list $$i" ;; \
++ esac; \
++ done; \
++ for i in $$list; do \
++ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
++ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
++ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
++ echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \
++ rm -f $(DESTDIR)$(man8dir)/$$inst; \
++ done
++install-man: $(MANS)
++ @$(NORMAL_INSTALL)
++ $(MAKE) $(AM_MAKEFLAGS) install-man8
++uninstall-man:
++ @$(NORMAL_UNINSTALL)
++ $(MAKE) $(AM_MAKEFLAGS) uninstall-man8
++
++tags: TAGS
++
++ID: $(HEADERS) $(SOURCES) $(LISP)
++ list='$(SOURCES) $(HEADERS)'; \
++ unique=`for i in $$list; do echo $$i; done | \
++ awk ' { files[$$0] = 1; } \
++ END { for (i in files) print i; }'`; \
++ here=`pwd` && cd $(srcdir) \
++ && mkid -f$$here/ID $$unique $(LISP)
++
++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
++ tags=; \
++ here=`pwd`; \
++ list='$(SOURCES) $(HEADERS)'; \
++ unique=`for i in $$list; do echo $$i; done | \
++ awk ' { files[$$0] = 1; } \
++ END { for (i in files) print i; }'`; \
++ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
++ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
++
++mostlyclean-tags:
++
++clean-tags:
++
++distclean-tags:
++ -rm -f TAGS ID
++
++maintainer-clean-tags:
++
++distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
++
++subdir = src/br2684
++
++distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/br2684/Makefile
++ @for file in $(DISTFILES); do \
++ d=$(srcdir); \
++ if test -d $$d/$$file; then \
++ cp -pr $$d/$$file $(distdir)/$$file; \
++ else \
++ test -f $(distdir)/$$file \
++ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
++ || cp -p $$d/$$file $(distdir)/$$file || :; \
++ fi; \
++ done
++
++DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
++
++-include $(DEP_FILES)
++
++mostlyclean-depend:
++
++clean-depend:
++
++distclean-depend:
++ -rm -rf .deps
++
++maintainer-clean-depend:
++
++%.o: %.c
++ @echo '$(COMPILE) -c $<'; \
++ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-cp .deps/$(*F).pp .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm .deps/$(*F).pp
++
++%.lo: %.c
++ @echo '$(LTCOMPILE) -c $<'; \
++ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
++ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
++ < .deps/$(*F).pp > .deps/$(*F).P; \
++ tr ' ' '\012' < .deps/$(*F).pp \
++ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
++ >> .deps/$(*F).P; \
++ rm -f .deps/$(*F).pp
++info-am:
++info: info-am
++dvi-am:
++dvi: dvi-am
++check-am: all-am
++check: check-am
++installcheck-am:
++installcheck: installcheck-am
++install-exec-am: install-sbinPROGRAMS
++install-exec: install-exec-am
++
++install-data-am: install-man
++install-data: install-data-am
++
++install-am: all-am
++ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
++install: install-am
++uninstall-am: uninstall-sbinPROGRAMS uninstall-man
++uninstall: uninstall-am
++all-am: Makefile $(PROGRAMS) $(MANS)
++all-redirect: all-am
++install-strip:
++ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
++installdirs:
++ $(mkinstalldirs) $(DESTDIR)$(sbindir) $(DESTDIR)$(mandir)/man8
++
++
++mostlyclean-generic:
++
++clean-generic:
++
++distclean-generic:
++ -rm -f Makefile $(CONFIG_CLEAN_FILES)
++ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
++
++maintainer-clean-generic:
++mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \
++ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
++ mostlyclean-generic
++
++mostlyclean: mostlyclean-am
++
++clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \
++ clean-depend clean-generic mostlyclean-am
++
++clean: clean-am
++
++distclean-am: distclean-sbinPROGRAMS distclean-compile \
++ distclean-libtool distclean-tags distclean-depend \
++ distclean-generic clean-am
++ -rm -f libtool
++
++distclean: distclean-am
++
++maintainer-clean-am: maintainer-clean-sbinPROGRAMS \
++ maintainer-clean-compile maintainer-clean-libtool \
++ maintainer-clean-tags maintainer-clean-depend \
++ maintainer-clean-generic distclean-am
++ @echo "This command is intended for maintainers to use;"
++ @echo "it deletes files that may require special tools to rebuild."
++
++maintainer-clean: maintainer-clean-am
++
++.PHONY: mostlyclean-sbinPROGRAMS distclean-sbinPROGRAMS \
++clean-sbinPROGRAMS maintainer-clean-sbinPROGRAMS uninstall-sbinPROGRAMS \
++install-sbinPROGRAMS mostlyclean-compile distclean-compile \
++clean-compile maintainer-clean-compile mostlyclean-libtool \
++distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \
++uninstall-man8 install-man uninstall-man tags mostlyclean-tags \
++distclean-tags clean-tags maintainer-clean-tags distdir \
++mostlyclean-depend distclean-depend clean-depend \
++maintainer-clean-depend info-am info dvi-am dvi check check-am \
++installcheck-am installcheck install-exec-am install-exec \
++install-data-am install-data install-am install uninstall-am uninstall \
++all-redirect all-am all installdirs mostlyclean-generic \
++distclean-generic clean-generic maintainer-clean-generic clean \
++mostlyclean distclean maintainer-clean
++
++
++# Tell versions [3.59,3.63) of GNU make to not export all variables.
++# Otherwise a system limit (for SysV at least) may be exceeded.
++.NOEXPORT:
+--- linux-atm-2.4.1.orig/src/br2684/br2684ctl.8
++++ linux-atm-2.4.1/src/br2684/br2684ctl.8
+@@ -0,0 +1,74 @@
++.\"
++.TH br2684ctl 1 "7 Jul 2003"
++.SH NAME
++br2684ctl \- RFC1483/2684 Bridge Daemon
++.SH SYNOPSIS
++.B br2684ctl
++[
++.BI \-b
++] [[
++.BI \-c\ n
++] [
++.BI \-e\ 0|1
++] [
++.BI \-s\ sndbuf
++] [
++.BI \-a\ [itf].vpi.vci
++]] ...
++.SH PARAMETERS
++.TP 15
++.BI \-a\ [itf].vpi.vci
++ATM PVC number, VPI and VCI. (Required)
++.BI \-b
++Puts the process in the background.
++.TP 15
++.BI \-c\ n
++br2684 interface number such as 0, 1, ... (Required)
++.TP 15
++.BI \-e\ 0|1
++Encapsulation method: 0=LLC, 1=VC mux (the default is 0 or LLC)
++.TP 15
++.TP 15
++.BI \-s\ sndbuf
++Send buffer size. Default is 8192.
++.SH DESCRIPTION
++br2684ctl handles RFC1483/2684 bridged PDUs.
++This is most often used in ADSL scenarios where
++.I usually
++the subscribers'
++ethernet traffic is encapsulated in ATM AAL5 (by bridging ADSL modems)
++according to RFC2684.
++The subscriber-side ADSL modem can be external with an ethernet connector
++or an internal ADSL card in a PC.
++RFC1483 has been obsoleted by RFC2684.
++
++For example it is possible to set up your Linux box to handle several
++ATM PVC's with bridged-1483 (sometimes referred as SNAP) encapsulation.
++The Linux network stack might provide DHCP, IP masquerading, IP firewall services or
++bridge the Ethernet frames just like it had several ethernet interfaces.
++In fact it can have several (logical) ethernet interfaces, where
++ATM is just used as a carrier.
++.SH USAGE
++br2684ctl creates a new network interface named nas[n]
++which is bound to an specific ATM PVC. It requires two mandatory
++arguments: -c, the interface number, and -a, the ATM PVC. It should be
++noted that the order of the command arguments matter; -c should be
++followed by -a. You can create as many interfaces as necessary
++in one go, just make a long command line ;)
++
++For example, following command will create a nas0 interface which uses
++the ATM PVC with VPI=0 and VCI=401. You need to configure the PVC connection
++0.401 on the ATM switch manually.
++
++% br2684ctl -c 0 -a 0.401
++
++The command will only create a new interface nas0.
++Next step is to assign an IP address and netmask to
++the interface nas0 using the ifconfig command. Using ifconfig, you can
++also assign a Ethernet MAC address to the interface nas0, if necessary.
++
++% ifconfig nas0 192.168.2.1 netmask 255.255.255.0
++.SH NOTES
++This man page is based on a tutorial by by Joonbum Byun <jbyun@megaxess.com>
++.SH SEE ALSO
++.BR qos (7)
+--- linux-atm-2.4.1.orig/doc/Makefile.in
++++ linux-atm-2.4.1/doc/Makefile.in
+@@ -1,4 +1,4 @@
+-# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am
++# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
+
+ # Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
+ # This Makefile.in is free software; the Free Software Foundation
+@@ -96,14 +96,14 @@
+
+ DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+-TAR = gtar
++TAR = tar
+ GZIP_ENV = --best
+ all: all-redirect
+ .SUFFIXES:
+ $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+- cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps doc/Makefile
++ cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
+
+-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+@@ -116,6 +116,11 @@
+ subdir = doc
+
+ distdir: $(DISTFILES)
++ here=`cd $(top_builddir) && pwd`; \
++ top_distdir=`cd $(top_distdir) && pwd`; \
++ distdir=`cd $(distdir) && pwd`; \
++ cd $(top_srcdir) \
++ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+--- linux-atm-2.4.1.orig/debian/patches/00list
++++ linux-atm-2.4.1/debian/patches/00list
+@@ -0,0 +1 @@
++10_atmbr2684.h
+--- linux-atm-2.4.1.orig/debian/patches/10_atmbr2684.h.dpatch
++++ linux-atm-2.4.1/debian/patches/10_atmbr2684.h.dpatch
+@@ -0,0 +1,598 @@
++#! /bin/sh -e
++## 01_kernel-header.dpatch by <bengen+debian@hilluzination.de>
++##
++## All lines beginning with ## DP:' are a description of the patch.
++## DP: add header file atmbr2684.h
++
++if [ -e /usr/include/linux/atmbr2684.h ]; then exit 0; fi
++
++if [ $# -ne 1 ]; then
++ echo "basename $0: script expects -patch|-unpatch as argument" >&2
++ exit 1
++fi
++case "$1" in
++ -patch) patch -f --no-backup-if-mismatch -p1 < $0;;
++ -unpatch) patch -f --no-backup-if-mismatch -E -R -p1 < $0;;
++ *)
++ echo "basename $0: script expects -patch|-unpatch as argument" >&2
++ exit 1;;
++esac
++
++exit 0
++@DPATCH@
++
++--- linux-atm.orig/src/include/linux/atmbr2684.h
+++++ linux-atm/src/include/linux/atmbr2684.h
++@@ -0,0 +1,101 @@
+++#ifndef _LINUX_ATMBR2684_H
+++#define _LINUX_ATMBR2684_H
+++
+++#include <linux/atm.h>
+++#include <linux/if.h> /* For IFNAMSIZ */
+++
+++/*
+++ * Type of media we're bridging (ethernet, token ring, etc) Currently only
+++ * ethernet is supported
+++ */
+++#define BR2684_MEDIA_ETHERNET (0) /* 802.3 */
+++#define BR2684_MEDIA_802_4 (1) /* 802.4 */
+++#define BR2684_MEDIA_TR (2) /* 802.5 - token ring */
+++#define BR2684_MEDIA_FDDI (3)
+++#define BR2684_MEDIA_802_6 (4) /* 802.6 */
+++
+++/*
+++ * Is there FCS inbound on this VC? This currently isn't supported.
+++ */
+++#define BR2684_FCSIN_NO (0)
+++#define BR2684_FCSIN_IGNORE (1)
+++#define BR2684_FCSIN_VERIFY (2)
+++
+++/*
+++ * Is there FCS outbound on this VC? This currently isn't supported.
+++ */
+++#define BR2684_FCSOUT_NO (0)
+++#define BR2684_FCSOUT_SENDZERO (1)
+++#define BR2684_FCSOUT_GENERATE (2)
+++
+++/*
+++ * Does this VC include LLC encapsulation?
+++ */
+++#define BR2684_ENCAPS_VC (0) /* VC-mux */
+++#define BR2684_ENCAPS_LLC (1)
+++#define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */
+++
+++/*
+++ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
+++ * the first element of the structure is the backend number and the rest
+++ * is per-backend specific
+++ */
+++struct atm_newif_br2684 {
+++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
+++ int media; /* BR2684_MEDIA_* */
+++ char ifname[IFNAMSIZ];
+++ int mtu;
+++};
+++
+++/*
+++ * This structure is used to specify a br2684 interface - either by a
+++ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
+++ */
+++#define BR2684_FIND_BYNOTHING (0)
+++#define BR2684_FIND_BYNUM (1)
+++#define BR2684_FIND_BYIFNAME (2)
+++struct br2684_if_spec {
+++ int method; /* BR2684_FIND_* */
+++ union {
+++ char ifname[IFNAMSIZ];
+++ int devnum;
+++ } spec;
+++};
+++
+++/*
+++ * This is for the ATM_SETBACKEND call - these are like socket families:
+++ * the first element of the structure is the backend number and the rest
+++ * is per-backend specific
+++ */
+++struct atm_backend_br2684 {
+++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
+++ struct br2684_if_spec ifspec;
+++ int fcs_in; /* BR2684_FCSIN_* */
+++ int fcs_out; /* BR2684_FCSOUT_* */
+++ int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */
+++ int encaps; /* BR2684_ENCAPS_* */
+++ int has_vpiid; /* 1: use vpn_id - Unsupported */
+++ __u8 vpn_id[7];
+++ int send_padding; /* unsupported */
+++ int min_size; /* we will pad smaller packets than this */
+++};
+++
+++/*
+++ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
+++ * terminating a large number of IP-only vcc's. When netfilter allows
+++ * efficient per-if in/out filters, this support will be removed
+++ */
+++struct br2684_filter {
+++ __u32 prefix; /* network byte order */
+++ __u32 netmask; /* 0 = disable filter */
+++};
+++
+++struct br2684_filter_set {
+++ struct br2684_if_spec ifspec;
+++ struct br2684_filter filter;
+++};
+++
+++#define BR2684_SETFILT _IOW( 'a', ATMIOC_BACKEND + 0, \
+++ struct br2684_filter_set)
+++
+++#endif /* _LINUX_ATMBR2684_H */
++--- linux-atm.orig/src/include/linux/atmdev.h
+++++ linux-atm/src/include/linux/atmdev.h
++@@ -0,0 +1,468 @@
+++/* atmdev.h - ATM device driver declarations and various related items */
+++
+++/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
+++
+++
+++#ifndef LINUX_ATMDEV_H
+++#define LINUX_ATMDEV_H
+++
+++
+++#include <linux/config.h>
+++#include <linux/atmapi.h>
+++#include <linux/atm.h>
+++#include <linux/atmioc.h>
+++
+++
+++#define ESI_LEN 6
+++
+++#define ATM_OC3_PCR (155520000/270*260/8/53)
+++ /* OC3 link rate: 155520000 bps
+++ SONET overhead: /270*260 (9 section, 1 path)
+++ bits per cell: /8/53
+++ max cell rate: 353207.547 cells/sec */
+++#define ATM_25_PCR ((25600000/8-8000)/54)
+++ /* 25 Mbps ATM cell rate (59111) */
+++#define ATM_OC12_PCR (622080000/1080*1040/8/53)
+++ /* OC12 link rate: 622080000 bps
+++ SONET overhead: /1080*1040
+++ bits per cell: /8/53
+++ max cell rate: 1412830.188 cells/sec */
+++#define ATM_DS3_PCR (8000*12)
+++ /* DS3: 12 cells in a 125 usec time slot */
+++
+++#define ATM_SD(s) ((s)->sk->protinfo.af_atm)
+++
+++
+++#define __AAL_STAT_ITEMS \
+++ __HANDLE_ITEM(tx); /* TX okay */ \
+++ __HANDLE_ITEM(tx_err); /* TX errors */ \
+++ __HANDLE_ITEM(rx); /* RX okay */ \
+++ __HANDLE_ITEM(rx_err); /* RX errors */ \
+++ __HANDLE_ITEM(rx_drop); /* RX out of memory */
+++
+++struct atm_aal_stats {
+++#define __HANDLE_ITEM(i) int i
+++ __AAL_STAT_ITEMS
+++#undef __HANDLE_ITEM
+++};
+++
+++
+++struct atm_dev_stats {
+++ struct atm_aal_stats aal0;
+++ struct atm_aal_stats aal34;
+++ struct atm_aal_stats aal5;
+++} __ATM_API_ALIGN;
+++
+++
+++#define ATM_GETLINKRATE _IOW('a',ATMIOC_ITF+1,struct atmif_sioc)
+++ /* get link rate */
+++#define ATM_GETNAMES _IOW('a',ATMIOC_ITF+3,struct atm_iobuf)
+++ /* get interface names (numbers) */
+++#define ATM_GETTYPE _IOW('a',ATMIOC_ITF+4,struct atmif_sioc)
+++ /* get interface type name */
+++#define ATM_GETESI _IOW('a',ATMIOC_ITF+5,struct atmif_sioc)
+++ /* get interface ESI */
+++#define ATM_GETADDR _IOW('a',ATMIOC_ITF+6,struct atmif_sioc)
+++ /* get itf's local ATM addr. list */
+++#define ATM_RSTADDR _IOW('a',ATMIOC_ITF+7,struct atmif_sioc)
+++ /* reset itf's ATM address list */
+++#define ATM_ADDADDR _IOW('a',ATMIOC_ITF+8,struct atmif_sioc)
+++ /* add a local ATM address */
+++#define ATM_DELADDR _IOW('a',ATMIOC_ITF+9,struct atmif_sioc)
+++ /* remove a local ATM address */
+++#define ATM_GETCIRANGE _IOW('a',ATMIOC_ITF+10,struct atmif_sioc)
+++ /* get connection identifier range */
+++#define ATM_SETCIRANGE _IOW('a',ATMIOC_ITF+11,struct atmif_sioc)
+++ /* set connection identifier range */
+++#define ATM_SETESI _IOW('a',ATMIOC_ITF+12,struct atmif_sioc)
+++ /* set interface ESI */
+++#define ATM_SETESIF _IOW('a',ATMIOC_ITF+13,struct atmif_sioc)
+++ /* force interface ESI */
+++#define ATM_GETSTAT _IOW('a',ATMIOC_SARCOM+0,struct atmif_sioc)
+++ /* get AAL layer statistics */
+++#define ATM_GETSTATZ _IOW('a',ATMIOC_SARCOM+1,struct atmif_sioc)
+++ /* get AAL layer statistics and zero */
+++#define ATM_GETLOOP _IOW('a',ATMIOC_SARCOM+2,struct atmif_sioc)
+++ /* get loopback mode */
+++#define ATM_SETLOOP _IOW('a',ATMIOC_SARCOM+3,struct atmif_sioc)
+++ /* set loopback mode */
+++#define ATM_QUERYLOOP _IOW('a',ATMIOC_SARCOM+4,struct atmif_sioc)
+++ /* query supported loopback modes */
+++#define ATM_SETSC _IOW('a',ATMIOC_SPECIAL+1,int)
+++ /* enable or disable single-copy */
+++#define ATM_SETBACKEND _IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
+++ /* set backend handler */
+++#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+++ /* use backend to make new if */
+++
+++/*
+++ * These are backend handkers that can be set via the ATM_SETBACKEND call
+++ * above. In the future we may support dynamic loading of these - for now,
+++ * they're just being used to share the ATMIOC_BACKEND ioctls
+++ */
+++#define ATM_BACKEND_RAW 0
+++#define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */
+++#define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */
+++
+++/* for ATM_GETTYPE */
+++#define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */
+++
+++/*
+++ * Loopback modes for ATM_{PHY,SAR}_{GET,SET}LOOP
+++ */
+++
+++/* Point of loopback CPU-->SAR-->PHY-->line--> ... */
+++#define __ATM_LM_NONE 0 /* no loop back ^ ^ ^ ^ */
+++#define __ATM_LM_AAL 1 /* loop back PDUs --' | | | */
+++#define __ATM_LM_ATM 2 /* loop back ATM cells ---' | | */
+++/* RESERVED 4 loop back on PHY side ---' */
+++#define __ATM_LM_PHY 8 /* loop back bits (digital) ----' | */
+++#define __ATM_LM_ANALOG 16 /* loop back the analog signal --------' */
+++
+++/* Direction of loopback */
+++#define __ATM_LM_MKLOC(n) ((n)) /* Local (i.e. loop TX to RX) */
+++#define __ATM_LM_MKRMT(n) ((n) << 8) /* Remote (i.e. loop RX to TX) */
+++
+++#define __ATM_LM_XTLOC(n) ((n) & 0xff)
+++#define __ATM_LM_XTRMT(n) (((n) >> 8) & 0xff)
+++
+++#define ATM_LM_NONE 0 /* no loopback */
+++
+++#define ATM_LM_LOC_AAL __ATM_LM_MKLOC(__ATM_LM_AAL)
+++#define ATM_LM_LOC_ATM __ATM_LM_MKLOC(__ATM_LM_ATM)
+++#define ATM_LM_LOC_PHY __ATM_LM_MKLOC(__ATM_LM_PHY)
+++#define ATM_LM_LOC_ANALOG __ATM_LM_MKLOC(__ATM_LM_ANALOG)
+++
+++#define ATM_LM_RMT_AAL __ATM_LM_MKRMT(__ATM_LM_AAL)
+++#define ATM_LM_RMT_ATM __ATM_LM_MKRMT(__ATM_LM_ATM)
+++#define ATM_LM_RMT_PHY __ATM_LM_MKRMT(__ATM_LM_PHY)
+++#define ATM_LM_RMT_ANALOG __ATM_LM_MKRMT(__ATM_LM_ANALOG)
+++
+++/*
+++ * Note: ATM_LM_LOC_* and ATM_LM_RMT_* can be combined, provided that
+++ * __ATM_LM_XTLOC(x) <= __ATM_LM_XTRMT(x)
+++ */
+++
+++
+++struct atm_iobuf {
+++ int length;
+++ void *buffer;
+++};
+++
+++/* for ATM_GETCIRANGE / ATM_SETCIRANGE */
+++
+++#define ATM_CI_MAX -1 /* use maximum range of VPI/VCI */
+++
+++struct atm_cirange {
+++ char vpi_bits; /* 1..8, ATM_CI_MAX (-1) for maximum */
+++ char vci_bits; /* 1..16, ATM_CI_MAX (-1) for maximum */
+++};
+++
+++/* for ATM_SETSC; actually taken from the ATM_VF number space */
+++
+++#define ATM_SC_RX 1024 /* enable RX single-copy */
+++#define ATM_SC_TX 2048 /* enable TX single-copy */
+++
+++#define ATM_BACKLOG_DEFAULT 32 /* if we get more, we're likely to time out
+++ anyway */
+++
+++/* MF: change_qos (Modify) flags */
+++
+++#define ATM_MF_IMMED 1 /* Block until change is effective */
+++#define ATM_MF_INC_RSV 2 /* Change reservation on increase */
+++#define ATM_MF_INC_SHP 4 /* Change shaping on increase */
+++#define ATM_MF_DEC_RSV 8 /* Change reservation on decrease */
+++#define ATM_MF_DEC_SHP 16 /* Change shaping on decrease */
+++#define ATM_MF_BWD 32 /* Set the backward direction parameters */
+++
+++#define ATM_MF_SET (ATM_MF_INC_RSV | ATM_MF_INC_SHP | ATM_MF_DEC_RSV | \
+++ ATM_MF_DEC_SHP | ATM_MF_BWD)
+++
+++/*
+++ * ATM_VS_* are used to express VC state in a human-friendly way.
+++ */
+++
+++#define ATM_VS_IDLE 0 /* VC is not used */
+++#define ATM_VS_CONNECTED 1 /* VC is connected */
+++#define ATM_VS_CLOSING 2 /* VC is closing */
+++#define ATM_VS_LISTEN 3 /* VC is listening for incoming setups */
+++#define ATM_VS_INUSE 4 /* VC is in use (registered with atmsigd) */
+++#define ATM_VS_BOUND 5 /* VC is bound */
+++
+++#define ATM_VS2TXT_MAP \
+++ "IDLE", "CONNECTED", "CLOSING", "LISTEN", "INUSE", "BOUND"
+++
+++#define ATM_VF2TXT_MAP \
+++ "ADDR", "READY", "PARTIAL", "REGIS", \
+++ "RELEASED", "HASQOS", "LISTEN", "META", \
+++ "256", "512", "1024", "2048", \
+++ "SESSION", "HASSAP", "BOUND", "CLOSE"
+++
+++
+++#ifndef __KERNEL__
+++#undef __AAL_STAT_ITEMS
+++#else
+++
+++#include <linux/sched.h> /* wait_queue_head_t */
+++#include <linux/time.h> /* struct timeval */
+++#include <linux/net.h>
+++#include <linux/skbuff.h> /* struct sk_buff */
+++#include <linux/uio.h>
+++#include <net/sock.h>
+++#include <asm/atomic.h>
+++
+++#ifdef CONFIG_PROC_FS
+++#include <linux/proc_fs.h>
+++#endif
+++
+++
+++struct k_atm_aal_stats {
+++#define __HANDLE_ITEM(i) atomic_t i
+++ __AAL_STAT_ITEMS
+++#undef __HANDLE_ITEM
+++};
+++
+++
+++struct k_atm_dev_stats {
+++ struct k_atm_aal_stats aal0;
+++ struct k_atm_aal_stats aal34;
+++ struct k_atm_aal_stats aal5;
+++};
+++
+++
+++enum {
+++ ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared
+++ by device driver. */
+++ ATM_VF_READY, /* VC is ready to transfer data. Set by device
+++ driver, cleared by anybody. */
+++ ATM_VF_PARTIAL, /* resources are bound to PVC (partial PVC
+++ setup), controlled by socket layer */
+++ ATM_VF_REGIS, /* registered with demon, controlled by SVC
+++ socket layer */
+++ ATM_VF_BOUND, /* local SAP is set, controlled by SVC socket
+++ layer */
+++ ATM_VF_RELEASED, /* demon has indicated/requested release,
+++ controlled by SVC socket layer */
+++ ATM_VF_HASQOS, /* QOS parameters have been set */
+++ ATM_VF_LISTEN, /* socket is used for listening */
+++ ATM_VF_META, /* SVC socket isn't used for normal data
+++ traffic and doesn't depend on signaling
+++ to be available */
+++ ATM_VF_SESSION, /* VCC is p2mp session control descriptor */
+++ ATM_VF_HASSAP, /* SAP has been set */
+++ ATM_VF_CLOSE, /* asynchronous close - treat like VF_RELEASED*/
+++};
+++
+++
+++#define ATM_VF2VS(flags) \
+++ (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \
+++ test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \
+++ test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \
+++ test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \
+++ test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE)
+++
+++
+++enum {
+++ ATM_DF_CLOSE, /* close device when last VCC is closed */
+++};
+++
+++
+++#define ATM_PHY_SIG_LOST 0 /* no carrier/light */
+++#define ATM_PHY_SIG_UNKNOWN 1 /* carrier/light status is unknown */
+++#define ATM_PHY_SIG_FOUND 2 /* carrier/light okay */
+++
+++#define ATM_ATMOPT_CLP 1 /* set CLP bit */
+++
+++
+++typedef struct { unsigned long bits; } atm_vcc_flags_t;
+++
+++
+++struct atm_vcc {
+++ atm_vcc_flags_t flags; /* VCC flags (ATM_VF_*) */
+++ short vpi; /* VPI and VCI (types must be equal */
+++ /* with sockaddr) */
+++ int vci;
+++ unsigned long aal_options; /* AAL layer options */
+++ unsigned long atm_options; /* ATM layer options */
+++ struct atm_dev *dev; /* device back pointer */
+++ struct atm_qos qos; /* QOS */
+++ struct atm_sap sap; /* SAP */
+++ void (*push)(struct atm_vcc *vcc,struct sk_buff *skb);
+++ void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */
+++ int (*push_oam)(struct atm_vcc *vcc,void *cell);
+++ int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
+++ void *dev_data; /* per-device data */
+++ void *proto_data; /* per-protocol data */
+++ struct k_atm_aal_stats *stats; /* pointer to AAL stats group */
+++ wait_queue_head_t sleep; /* if socket is busy */
+++ struct sock *sk; /* socket backpointer */
+++ struct atm_vcc *prev,*next;
+++ /* SVC part --- may move later ------------------------------------- */
+++ short itf; /* interface number */
+++ struct sockaddr_atmsvc local;
+++ struct sockaddr_atmsvc remote;
+++ void (*callback)(struct atm_vcc *vcc);
+++ struct sk_buff_head listenq;
+++ int backlog_quota; /* number of connection requests we */
+++ /* can still accept */
+++ int reply; /* also used by ATMTCP */
+++ /* Multipoint part ------------------------------------------------- */
+++ struct atm_vcc *session; /* session VCC descriptor */
+++ /* Other stuff ----------------------------------------------------- */
+++ void *user_back; /* user backlink - not touched by */
+++ /* native ATM stack. Currently used */
+++ /* by CLIP and sch_atm. */
+++};
+++
+++
+++struct atm_dev_addr {
+++ struct sockaddr_atmsvc addr; /* ATM address */
+++ struct atm_dev_addr *next; /* next address */
+++};
+++
+++
+++typedef struct { unsigned int bits; } atm_dev_flags_t;
+++
+++
+++struct atm_dev {
+++ const struct atmdev_ops *ops; /* device operations; NULL if unused */
+++ const struct atmphy_ops *phy; /* PHY operations, may be undefined */
+++ /* (NULL) */
+++ const char *type; /* device type name */
+++ int number; /* device index */
+++ struct atm_vcc *vccs; /* VCC table (or NULL) */
+++ struct atm_vcc *last; /* last VCC (or undefined) */
+++ void *dev_data; /* per-device data */
+++ void *phy_data; /* private PHY date */
+++ atm_dev_flags_t flags; /* device flags (ATM_DF_*) */
+++ struct atm_dev_addr *local; /* local ATM addresses */
+++ unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */
+++ struct atm_cirange ci_range; /* VPI/VCI range */
+++ struct k_atm_dev_stats stats; /* statistics */
+++ char signal; /* signal status (ATM_PHY_SIG_*) */
+++ int link_rate; /* link rate (default: OC3) */
+++ atomic_t refcnt; /* reference count */
+++ spinlock_t lock; /* protect internal members */
+++#ifdef CONFIG_PROC_FS
+++ struct proc_dir_entry *proc_entry; /* proc entry */
+++ char *proc_name; /* proc entry name */
+++#endif
+++ struct list_head dev_list; /* linkage */
+++};
+++
+++
+++/*
+++ * ioctl, getsockopt, setsockopt, and sg_send are optional and can be set to
+++ * NULL. */
+++
+++/* OF: send_Oam Flags */
+++
+++#define ATM_OF_IMMED 1 /* Attempt immediate delivery */
+++#define ATM_OF_INRATE 2 /* Attempt in-rate delivery */
+++
+++struct atmdev_ops { /* only send is required */
+++ void (*dev_close)(struct atm_dev *dev);
+++ int (*open)(struct atm_vcc *vcc,short vpi,int vci);
+++ void (*close)(struct atm_vcc *vcc);
+++ int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void *arg);
+++ int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
+++ void *optval,int optlen);
+++ int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
+++ void *optval,int optlen);
+++ int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
+++ int (*sg_send)(struct atm_vcc *vcc,unsigned long start,
+++ unsigned long size);
+++#if 0 /* keep the current hack for now */
+++ int (*send_iovec)(struct atm_vcc *vcc,struct iovec *iov,int size,
+++ void (*discard)(struct atm_vcc *vcc,void *user),void *user);
+++#endif
+++ int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
+++ void (*phy_put)(struct atm_dev *dev,unsigned char value,
+++ unsigned long addr);
+++ unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr);
+++ void (*feedback)(struct atm_vcc *vcc,struct sk_buff *skb,
+++ unsigned long start,unsigned long dest,int len);
+++ int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags);
+++ int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page);
+++ struct module *owner;
+++};
+++
+++
+++struct atmphy_ops {
+++ int (*start)(struct atm_dev *dev);
+++ int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void *arg);
+++ void (*interrupt)(struct atm_dev *dev);
+++ int (*stop)(struct atm_dev *dev);
+++};
+++
+++struct atm_skb_data {
+++ struct atm_vcc *vcc; /* ATM VCC */
+++ unsigned long atm_options; /* ATM layer options */
+++};
+++
+++#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
+++
+++struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
+++ int number,atm_dev_flags_t *flags); /* number == -1: pick first available */
+++struct atm_dev *atm_dev_lookup(int number);
+++void atm_dev_deregister(struct atm_dev *dev);
+++void shutdown_atm_dev(struct atm_dev *dev);
+++void bind_vcc(struct atm_vcc *vcc,struct atm_dev *dev);
+++
+++
+++/*
+++ * This is approximately the algorithm used by alloc_skb.
+++ *
+++ */
+++
+++static inline int atm_guess_pdu2truesize(int pdu_size)
+++{
+++ return ((pdu_size+15) & ~15) + sizeof(struct sk_buff);
+++}
+++
+++
+++static inline void atm_force_charge(struct atm_vcc *vcc,int truesize)
+++{
+++ atomic_add(truesize, &vcc->sk->rmem_alloc);
+++}
+++
+++
+++static inline void atm_return(struct atm_vcc *vcc,int truesize)
+++{
+++ atomic_sub(truesize, &vcc->sk->rmem_alloc);
+++}
+++
+++
+++static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size)
+++{
+++ return (size + atomic_read(&vcc->sk->wmem_alloc)) < vcc->sk->sndbuf;
+++}
+++
+++
+++static inline void atm_dev_hold(struct atm_dev *dev)
+++{
+++ atomic_inc(&dev->refcnt);
+++}
+++
+++
+++static inline void atm_dev_release(struct atm_dev *dev)
+++{
+++ atomic_dec(&dev->refcnt);
+++
+++ if ((atomic_read(&dev->refcnt) == 1) &&
+++ test_bit(ATM_DF_CLOSE,&dev->flags))
+++ shutdown_atm_dev(dev);
+++}
+++
+++
+++int atm_charge(struct atm_vcc *vcc,int truesize);
+++struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size,
+++ int gfp_flags);
+++int atm_find_ci(struct atm_vcc *vcc,short *vpi,int *vci);
+++int atm_pcr_goal(struct atm_trafprm *tp);
+++
+++void atm_async_release_vcc(struct atm_vcc *vcc,int reply);
+++
+++#endif /* __KERNEL__ */
+++
+++#endif
+--- linux-atm-2.4.1.orig/debian/README.br2684
++++ linux-atm-2.4.1/debian/README.br2684
+@@ -0,0 +1,79 @@
++README.br2684
++~~~~~~~~~~~~~
++
++The linux-atm CVS includes a program called br2684 which can be used
++to configure br2684 ATM bridging. On request (#216663), the Debian
++maintainer included br2684 in the source package.
++
++This was done in a way that separates the - unreleased CVS snapshot -
++br2684 program into its own binary package so avoid shipping
++released and unreleased software in the same binary package.
++
++The modified source package (2.4.1-10) was rejected by Debian
++ftpmaster because he found the package too small to warrant its own
++.deb.
++
++Hence, atm-tools-br2684 is not built any more.
++
++You can, however, build your own atm-tools-br2684 package from the
++official Debian source package by following this "script".
++
++(0)
++Install all build dependencies plus autoconf, libtool, automake. If
++#219936 is still unfixed, copy /usr/bin/autoreconf to a local
++directory and apply the following patch after changing "+@@" to "@@"
++in the first line (this was inserted to be able to feed this readme to
++patch to apply the patch given in (1).
++
++--- /usr/bin/autoreconf
+++++ autoreconf
+++@@ -183,7 +183,7 @@
++ {
++ $autoconf .= ' --force';
++ $autoheader .= ' --force';
++- $automake .= ' --force-missing';
+++ $automake .= '';
++ $autopoint .= ' --force';
++ $libtoolize .= ' --force';
++ }
++
++(1) Apply the following patch
++--- configure.in.orig
+++++ configure.in
++@@ -152,6 +152,7 @@
++ m4/Makefile \
++ src/Makefile \
++ src/include/Makefile \
+++ src/br2684/Makefile \
++ src/lib/Makefile \
++ src/test/Makefile \
++ src/debug/Makefile \
++--- debian/rules.orig
+++++ debian/rules
++@@ -11,7 +11,7 @@
++ export PACKAGE=linux-atm
++
++ buildindeppackages=atm-dev
++-buildarchpackages=atm-tools libatm1 libatm1-dev
+++buildarchpackages=atm-tools atm-tools-br2684 libatm1 libatm1-dev
++
++ # generate -ppackage1 -ppackage2 ... commandline for debhelper
++ dhbuildarchpackages=$(addprefix -p,$(buildarchpackages))
++--- src/Makefile.am.orig
+++++ src/Makefile.am
++@@ -1,3 +1,3 @@
++ SUBDIRS = include lib test debug qgen saal sigd maint arpd ilmid man led lane \
++- mpoad switch config extra
+++ mpoad switch config extra br2684
++
++
++(2)
++Invoke autoreconf -f -i
++
++(3)
++create your own changelog entry and your own local version number
++
++(4)
++Build the package as usual
++
++Marc Haber, 2003-11-05
+--- linux-atm-2.4.1.orig/debian/control
++++ linux-atm-2.4.1/debian/control
+@@ -0,0 +1,57 @@
++Source: linux-atm
++Section: net
++Priority: optional
++Maintainer: Peter De Schrijver (p2) <p2@mind.be>
++Build-Depends: debhelper (>> 4.0.0), bison, flex, perl, dpatch, automake1.4
++Standards-Version: 3.6.1
++
++Package: atm-tools
++Architecture: any
++Depends: ${shlibs:Depends}
++Description: Base programs for ATM in Linux, the net-tools for ATM
++ This package provides all the basic programs needed for setting up,
++ monitoring and tuning ATM networks. Such as:
++ * atmsigd, an ATM signal daemon that implements the ATM UNI protocol.
++ * atmtcp, a tool to setup ATM over TCP connections.
++ * atmarpd, an implementation of the ATMARP protocol (RFC1577, RFC1755)
++ * zeppelin, an ATM LAN Emulation client daemon
++ * les and bus, ATM LAN Emulation service daemons
++ .
++ Notice that upstream still flags these tools as experimental software and
++ says that there is still a number of known bugs and issues. The
++ software is, however, in productive use at a number of sites and is
++ working reliably.
++ .
++ Homepage: http://linux-atm.sourceforge.net/
++
++Package: atm-dev
++Depends: libatm1-dev
++Architecture: all
++Section: oldlibs
++Description: Development files for compiling ATM programs (dummy package)
++ This dummy package provides a transition from the previous atm packages.
++ It is provided for backwards compatibility only and may be removedafter
++ the upgrade has completed or when when no other package depend on it.
++
++Package: libatm1
++Section: libs
++Architecture: any
++Depends: ${shlibs:Depends}
++Conflicts: atm-tools (<< 2.4.1-6)
++Description: shared library for ATM (Asynchronous Transfer Mode)
++ Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
++ .
++ Homepage: http://linux-atm.sourceforge.net/
++
++Package: libatm1-dev
++Section: libdevel
++Architecture: any
++Depends: libc6-dev, libatm1
++Replaces: atm-dev (<< 2.4.1-7)
++Conflicts: atm-dev (<< 2.4.1-7)
++Provides: libatm-dev
++Description: Development files for compiling ATM programs
++ Header files and development libraries for compiling ATM (Asynchronous
++ Transfer Mode) related programs.
++ .
++ Homepage: http://linux-atm.sourceforge.net/
+--- linux-atm-2.4.1.orig/debian/atm-tools-br2684.dirs
++++ linux-atm-2.4.1/debian/atm-tools-br2684.dirs
+@@ -0,0 +1,2 @@
++usr/sbin
++usr/share/man/man8
+--- linux-atm-2.4.1.orig/debian/rules
++++ linux-atm-2.4.1/debian/rules
+@@ -0,0 +1,136 @@
++#!/usr/bin/make -f
++# Sample debian/rules that uses debhelper.
++# GNU copyright 1997 to 1999 by Joey Hess.
++
++# Uncomment this to turn on verbose mode.
++#export DH_VERBOSE=1
++
++# This is the debhelper compatability version to use.
++export DH_COMPAT=4
++
++export PACKAGE=linux-atm
++
++buildindeppackages=atm-dev
++buildarchpackages=atm-tools libatm1 libatm1-dev
++
++# generate -ppackage1 -ppackage2 ... commandline for debhelper
++dhbuildarchpackages=$(addprefix -p,$(buildarchpackages))
++dhbuildindeppackages=$(addprefix -p,$(buildindeppackages))
++
++include /usr/share/dpatch/dpatch.make
++
++configure: configure-stamp
++configure-stamp:
++ dh_testdir
++ ./configure --prefix /usr --mandir /usr/share/man --sysconfdir /etc
++ touch configure-stamp
++
++build: configure-stamp build-stamp
++build-stamp: patch-stamp
++ dh_testdir
++
++ # Add here commands to compile the package.
++ $(MAKE) $(EXTRA_VARS)
++ cat debian/copyright.header COPYING > debian/copyright
++
++ touch build-stamp
++
++clean: clean1 unpatch
++clean1:
++ dh_testdir
++ dh_testroot
++ rm -f build-stamp configure-stamp
++
++ # Add here commands to clean up after the build process.
++ -$(MAKE) distclean
++
++ dh_clean
++ rm -rf debian/atm-tools.8 debian/copyright
++
++install: build
++ dh_testdir
++ dh_testroot
++ dh_clean -k
++ dh_installdirs
++
++ # Add here commands to install the package into debian/atm-tools
++ $(MAKE) DESTDIR=`pwd`/debian/tmp install
++
++ # manpages
++ /usr/bin/pod2man --section=8 --release="atm-tools $(PKG_VER)" --lax \
++ --center="Debian GNU/Linux" debian/atm-tools.pod > debian/atm-tools.8
++
++ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/aread.8
++ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/awrite.8
++ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/enitune.8
++ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/ilmid.8
++ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/saaldump.8
++ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/sonetdiag.8
++ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/ttcp_atm.8
++ ln -s atm-tools.8 debian/tmp/usr/share/man/man8/zntune.8
++
++# Build architecture-independent files here.
++binary-indep: build install
++ dh_testdir $(dhbuildindeppackages)
++ dh_testroot $(dhbuildindeppackages)
++ dh_install $(dhbuildindeppackages)
++
++# dh_installdebconf $(dhbuildindeppackages)
++ dh_installdocs $(dhbuildindeppackages)
++ dh_installmenu $(dhbuildindeppackages)
++# dh_installlogrotate $(dhbuildindeppackages)
++# dh_installemacsen $(dhbuildindeppackages)
++# dh_installpam $(dhbuildindeppackages)
++# dh_installmime $(dhbuildindeppackages)
++ dh_installinit $(dhbuildindeppackages) --init-script=atm -- start 34 0 6 . start 39 S .
++ dh_installcron $(dhbuildindeppackages)
++ dh_installman $(dhbuildindeppackages)
++ dh_installinfo $(dhbuildindeppackages)
++# dh_undocumented $(dhbuildindeppackages)
++ dh_installchangelogs -i ChangeLog $(dhbuildpackages)
++ dh_link $(dhbuildindeppackages)
++ dh_strip $(dhbuildindeppackages)
++ dh_compress $(dhbuildindeppackages)
++ dh_fixperms $(dhbuildindeppackages)
++ dh_makeshlibs $(dhbuildindeppackages)
++ dh_installdeb $(dhbuildindeppackages)
++# dh_perl $(dhbuildindeppackages)
++ dh_shlibdeps $(dhbuildindeppackages)
++ dh_gencontrol $(dhbuildindeppackages)
++ dh_md5sums $(dhbuildindeppackages)
++ dh_builddeb $(dhbuildindeppackages)
++
++# Build architecture-dependent files here.
++binary-arch: build install
++ dh_testdir $(dhbuildarchpackages)
++ dh_testroot $(dhbuildarchpackages)
++ dh_install $(dhbuildarchpackages)
++
++# dh_installdebconf $(dhbuildarchpackages)
++ dh_installdocs $(dhbuildarchpackages)
++ dh_installmenu $(dhbuildarchpackages)
++# dh_installlogrotate $(dhbuildarchpackages)
++# dh_installemacsen $(dhbuildarchpackages)
++# dh_installpam $(dhbuildarchpackages)
++# dh_installmime $(dhbuildarchpackages)
++ dh_installinit $(dhbuildarchpackages) --init-script=atm -- start 34 0 6 . start 39 S .
++ dh_installcron $(dhbuildarchpackages)
++ dh_installman $(dhbuildarchpackages)
++ dh_installinfo $(dhbuildarchpackages)
++# dh_undocumented $(dhbuildarchpackages)
++ dh_installchangelogs -a ChangeLog $(dhbuildarchpackages)
++ dh_link $(dhbuildarchpackages)
++ dh_strip $(dhbuildarchpackages)
++ dh_compress $(dhbuildarchpackages)
++ dh_fixperms $(dhbuildarchpackages)
++ dh_makeshlibs $(dhbuildarchpackages)
++ dh_installdeb $(dhbuildarchpackages)
++# dh_perl $(dhbuildarchpackages)
++ dh_shlibdeps -a -L libatm1 -l debian/libatm1/lib $(dhbuildarchpackages)
++ dh_gencontrol $(dhbuildarchpackages)
++ dh_md5sums $(dhbuildarchpackages)
++ dh_builddeb $(dhbuildarchpackages)
++
++binary: binary-indep binary-arch
++.PHONY: build binary-indep binary-arch binary install configure
++ get-2684 patch unpatch clean1
+--- linux-atm-2.4.1.orig/debian/atm-tools-br2684.install
++++ linux-atm-2.4.1/debian/atm-tools-br2684.install
+@@ -0,0 +1 @@
++debian/tmp/usr/sbin/br2684ctl usr/sbin
+--- linux-atm-2.4.1.orig/debian/atm-tools-br2684/usr/share/doc/atm-tools-br2684/changelog.Debian
++++ linux-atm-2.4.1/debian/atm-tools-br2684/usr/share/doc/atm-tools-br2684/changelog.Debian
+@@ -0,0 +1,206 @@
++linux-atm (2.4.1-16) unstable; urgency=low
++
++ * Fix build problem with gcc 3.4 (Closes: #259422)
++
++ -- Peter De Schrijver (p2) <p2@mind.be> Thu, 15 Jul 2004 14:28:10 +0200
++
++linux-atm (2.4.1-15) unstable; urgency=low
++
++ * Updated descriptions (Closes: #239161)
++
++ -- Peter De Schrijver (p2) <p2@mind.be> Sun, 4 Apr 2004 21:10:20 +0200
++
++linux-atm (2.4.1-14) unstable; urgency=low
++
++ * Fix symlink for /usr/lib/libatm.so (Closes: #221011)
++
++ -- Peter De Schrijver (p2) <p2@mind.be> Sun, 7 Dec 2003 21:53:19 +0100
++
++linux-atm (2.4.1-13) unstable; urgency=low
++
++ * Previous version fixed #217259, but no changelog entry (Closes: #217259)
++ * Previous version fixed #216662, but no changelog entry (Closes: #216662)
++ * Added missing build dependency on automake1.4 (Closes: #221120, #221284)
++ * New Maintainer (Closes: #206982)
++
++ -- Peter De Schrijver (p2) <p2@mind.be> Mon, 17 Nov 2003 23:03:58 +0100
++
++linux-atm (2.4.1-12) unstable; urgency=low
++
++ * don't build atm-tools-br2684 by default. Thanks to ftpmaster for
++ not allowing the package to be in Debian.
++ * Since we don't build atm-tools-br2684 any more, revert back to
++ autotools output from 2.4.1-9
++ * Add README.br2684 documenting a way to build the package locally.
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 5 Nov 2003 21:31:42 +0000
++
++linux-atm (2.4.1-11) experimental; urgency=low
++
++ * Build-Depend on dpatch
++ * dpatch br2684 header files from later libc for old libc (woody)
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 29 Oct 2003 19:05:07 +0000
++
++linux-atm (2.4.1-10) experimental; urgency=low
++
++ * add br2684 to package (closes: #216663)
++ * autoreconf to actually build br2684
++ * have libatm1-dev provide libatm-dev (closes: #216662)
++ * move lib symlink to libatm1-dev as well (closes: #217259)
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Thu, 23 Oct 2003 17:55:43 +0000
++
++linux-atm (2.4.1-9) unstable; urgency=low
++
++ * put libatm1-dev in libdevel (closes: #213170)
++ * make sure that new descriptions actually make it into the package
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Thu, 9 Oct 2003 17:08:10 +0000
++
++linux-atm (2.4.1-8) unstable; urgency=low
++
++ * build arch-indep package as targets of binary-indep (closes: #212124)
++ * use dh_installdocs to install files to libatm1-dev/docs
++ * symlink shared lib to usr/bin (closes: #213146)
++ * Use better long descriptions. Thanks to Javier (closes: #209427)
++ Fernandez-Sanguino (closes: #209612)
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Sun, 28 Sep 2003 19:29:08 +0000
++
++linux-atm (2.4.1-7) unstable; urgency=low
++
++ * libatm1 now conflicts with atm-tools (<< 2.4.1-6) (closes: #208170)
++ * armarp now writes output to stdout.
++ * add atm-dev as empty transitional package to help upgrades
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 2 Sep 2003 09:20:33 +0000
++
++linux-atm (2.4.1-6) unstable; urgency=low
++
++ * split off shared libraries to libatm1
++ * rename atm-dev to libatm1-dev
++ * Standards-Version: 3.6.1
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 26 Aug 2003 15:46:27 +0000
++
++linux-atm (2.4.1-5) unstable; urgency=low
++
++ * move *.a and *.la to usr/lib (closes: #199506).
++ * let atm-dev depend on atm-tools to avoid dangling /lib/libatm.so
++ symlink.
++ * Standards-Version: 3.5.6
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 30 Jul 2003 11:46:19 +0000
++
++linux-atm (2.4.1-4) unstable; urgency=low
++
++ * add Build-Depends: on automake1.4
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 11 Jun 2003 16:58:21 +0000
++
++linux-atm (2.4.1-3) unstable; urgency=low
++
++ * rebuilding libtool broke src/test/Makefile.in. Applied fix to
++ Makefile.am and re-built again.
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 11 Jun 2003 11:05:26 +0000
++
++linux-atm (2.4.1-2) unstable; urgency=low
++
++ * rebuild configure script with new libtool (closes: #196909)
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 10 Jun 2003 21:01:50 +0000
++
++linux-atm (2.4.1-1) unstable; urgency=low
++
++ * new upstream source
++ * remove atmarp and atmarpd from /usr/sbin as they are already in
++ /sbin (closes: #196216)
++ * lintian fixes
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Mon, 9 Jun 2003 16:03:45 +0000
++
++linux-atm (2.4.0-5) unstable; urgency=low
++
++ * Fix for src/test/Makefile.in to allow building on hppa and ia64
++ which the fix introduced to 2.4.0-4 broke. Thanks to Goswin
++ Brederlow.
++ * Move init.d priority to that atmarpd is started before network
++ interfaces are started.
++ * Move atmarpd and libatm to /sbin and /lib to allow atmarpd to be
++ started before /usr is mounted.
++ * use dh_install instead of dh_movefiles.
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Sat, 24 Aug 2002 15:13:48 +0000
++
++linux-atm (2.4.0-4) unstable; urgency=low
++
++ * new maintainer
++ * Fix for src/test/Makefile.in to allow building on sparc.
++ Thanks to Patrick Mauritz. (closes: #144225).
++ * added pseudo-manpage for manpage-less binaries.
++ * removed rpath by changing configure and make install paramaters
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Fri, 16 Aug 2002 20:39:05 +0000
++
++linux-atm (2.4.0-3) unstable; urgency=HIGH
++
++ * Re-ran libtoolize.
++ Closes: #143522
++
++ * Previous version Closes: #135328
++
++ -- Russell Coker <russell@coker.com.au> Fri, 19 Apr 2002 01:55:00 +0200
++
++linux-atm (2.4.0-2) unstable; urgency=HIGH
++
++ * Put a "grep -v EMAXERRNO" into the build process to deal with mipsel and
++ the "#ifdef __KERNEL__" it has in it's /usr/include/asm/errno.h .
++
++ -- Russell Coker <russell@coker.com.au> Thu, 18 Apr 2002 19:56:00 +0200
++
++linux-atm (2.4.0-1) unstable; urgency=HIGH
++
++ * New upstream version which changes source package name.
++ Closes: #138911
++
++ -- Russell Coker <russell@coker.com.au> Mon, 18 Mar 2002 17:42:00 +0100
++
++atm (0.79-4) unstable; urgency=low
++
++ * Added build-depends on flex.
++ Closes: #111072
++
++ * Made the atm tools use a shared object to save space.
++
++ * Fixed the copyright file and put all copyright details in both packages.
++
++ * Added support for easy building with different kernel headers.
++ Closes: #110249
++
++ -- Russell Coker <russell@coker.com.au> Sun, 7 Oct 2001 14:11:33 +0200
++
++atm (0.79-3) unstable; urgency=low
++
++ * Created /etc/init.d/atm to start and stop atmarpd.
++ Closes: #110252
++
++ * Added build-depends on bison.
++ Closes: #110576
++
++ -- Russell Coker <russell@coker.com.au> Fri, 31 Aug 2001 15:21:44 +0200
++
++atm (0.79-2) unstable; urgency=low
++
++ * Changed the main package name to atm-tools to indicate that it doesn't
++ provide ATM (gotta have the kernel support), it just has the daemons and
++ utilities.
++
++ -- Russell Coker <russell@coker.com.au> Sat, 25 Aug 2001 17:55:00 +0200
++
++atm (0.79-1) unstable; urgency=low
++
++ * Initial Release.
++
++ -- Russell Coker <russell@coker.com.au> Fri, 24 Aug 2001 17:31:00 +0200
+--- linux-atm-2.4.1.orig/debian/atm-tools-br2684/usr/share/doc/atm-tools-br2684/changelog
++++ linux-atm-2.4.1/debian/atm-tools-br2684/usr/share/doc/atm-tools-br2684/changelog
+@@ -0,0 +1,3299 @@
++Version 2.4.0 to 2.4.1 (25-APR-2003)
++=====================
++
++Bug fixes
++---------
++
++ - vsprintf's changed to vsnprintf's to prevent possible stack overflows
++
++
++Version 0.79 to 2.4.0 (18-OCT-2001)
++=====================
++
++Bug fixes
++---------
++
++ - defined 'now' in src/lib/timer.c
++ - ia64 build fix for ASN (Chas Williams)
++
++Other changes
++-------------
++
++ - In general, the source tree was rearranged and the old cruft was removed
++ - Old ad hoc build system replaced in favor of a standardized autoconfiscation
++ - Build configuration options are now controlled by 'configure' script instead
++ of changes to the previous 'Rules.make' file
++ - libatm and libatmd merged into one lib: libatm
++ - Both static and shared libraries are built by default. Binaries now built
++ with shared library by default.
++ - Sample atmsigd.conf and hosts.atm are now installed when doing 'make install'
++ - RPM spec file is now available in src/extra/
++ - New RedHat init scripts available in src/config/init-redhat/ (John Strange)
++ (old RedHat 4.0 scripts removed)
++ - ATM on Linux HOWTO now included in doc/ (much derived from usage.tex). We
++ will publish this on the home page as well as linuxdoc.org
++ - tcpdump and libpcap ATM patches/build removed (they have been integrated into
++ their respective packages; see www.tcpdump.org)
++ - ATM Name Service (ANS) files coalesced into src/extra/ANS
++ - ANS bind patch upgraded to bind-4.9.8 (untested)
++ - rtf2e164_cc.pl removed in favor of src/extra/ANS/pdf2e164_cc.pl. The ITU no
++ longer provides E.164 country codes in RTF format. PDF used instead.
++
++
++Version 0.78 to 0.79 (15-AUG-2001)
++====================
++
++Bug fixes
++---------
++
++- uni.c fix for newer versions of gcc
++- mpoad/io.c quick fix for undefined OPEN_MAX
++
++
++Version 0.77 to 0.78 (7-JUL-2000)
++====================
++
++Bug fixes
++---------
++
++ - skb_migrate wasn't protected against functions accessing the list via
++ skb->list
++ - removal of MOD_xxx races in FORE 200E and atmtcp (by Jeff Garzik)
++ - CONFIG_ATM_NICSTAR_USE_IDT77105 set NEED_SUNI_MX instead of
++ NEED_IDT77105_MX (fix from mainstream)
++ - ambassador.c: changed string concatenation and offset calculation breaking
++ compilation with gcc 2.96 (by Jakub Jelinek)
++ - nicstar.c: various locking fixes for SMP (by Rui Prior)
++ - LANE vs. bridging build conflict solved (from mainstream)
++ - %%u instead of %u in mpc.c
++ - fixed formatting of /proc/net/atm/svc
++ - /proc/net/atm/clip always added + after public address, not only if followed
++ by private address
++ - atmsigd now returns EINVAL if attempting to change max_sdu
++ - atm_change_qos now calls adjust_to for additional parameter checking
++ - sendmsg now returns error if size > max_sdu (reported by Alan Kennington)
++ - removed explicit defaults in Config.in (by Christoph Hellwig)
++ - Fore200E: removed #ifdef MODULE
++ - ipcommon.c didn't export skb_migrate to modules (by Mitchell Blank)
++ - ENI: /proc/net/atm/eni:* claimed backlog was in bytes instead of packets
++ - br, bw, window: changed variables receiving possibly negative return values
++ from size_t to ssize_t (reported by Alan Kennington)
++ - LANE: fixed stray errors on lack of ATM address, ATM address change, or ESI
++ change (by Heikki Vatiainen)
++ - LANE: could loop forwever when trying to connect to LECS (by Heikki
++ Vatiainen)
++
++New features
++------------
++
++ - upgraded to the 2.4.0-test3-pre4 kernel
++
++Other changes
++-------------
++
++ - as_reject now returns the errno value in msg->reply
++ - removed save_qos hack in svc_change_qos
++ - atmsigd: sap_encode now always includes both max_sdu fields, even if one
++ contains the null value for some reason (by Mohsen Souissi)
++ - PCI updates for Ambassador, FORE 200E, Horizon, Iphase, nicstar, ENI, and
++ ZATM (by Jeff Garzik)
++ - removal of unnecessary #ifdef MODULE for nicstar, idt77105, and FORE 200E
++ (by Jeff Garzik)
++ - generalized skb_migrate to append to an arbitrary sk_buff list
++ - iphase.c: timer initialization cleanup (from mainstream)
++ - clip: dev->name initialization change (from mainstream)
++ - idt77105: cleaned up timer initialization
++ - clip.c: some general cleanup
++ - removed redundant return in clip.c (by Heikki Vatiainen)
++ - changed atm_change_qos to static
++ - fore200e.c: re-enabled anti-unloading code
++ - lec.c: now drops packets on overrun instead of growing infinite queue (by
++ Heikki Vatiainen)
++ - COPYING still mentioned the old led code with partial DEC copyright
++ (reported by Chris Pimlott)
++ - Horizon: removed const warning by casting to (hrz_flags *)
++ - Iphase: tried to print unsigned long with %x when errors are enabled
++ - ENI: eni_send tries to use do_tx instead of tasklet_schedule to reduce delay
++ - ENI: removed eni_dev->backlog_len (information is already in backlog->qlen)
++ - changed the kernel source tree references from .gz to .bz2 compression
++ - changed mkdiff to allow more flexible selection of additional patch
++
++
++Version 0.76 to 0.77 (29-APR-2000)
++====================
++
++Bug fixes
++---------
++
++ - atmaddr.8, atmarp.8, atmdump.8, atmloop.8, esi.8 didn't print all options
++ in bold
++ - atmsigd crashed if an interface had more than one local ATM address
++ - atmarpd continued to use VCs after closing if they were closed because
++ ATMARP_SETENTRY failed (reported by Joseph Gooch)
++
++New features
++------------
++
++ - upgraded to the 2.3.99-pre6 kernel
++
++Other changes
++-------------
++
++ - CLIP now uses NETDEV_GOING_DOWN instead of NETDEV_DOWN; also avoids
++ "clip_device_event: unknown event 9" warning
++ - added ubr:pcr example to qos(7)
++ - added -V option to atmaddr, atmarp, atmarpd, atmloop, atmsigd, atmtcp, esi,
++ ilmid
++ - sock->sk->sleep now points to vcc->sleep (by Alexander Viro)
++ - CLIP: ATMARP server now reponds to query for local IP address (suggested by
++ Joseph Gooch)
++ - updated t2a.pl
++
++
++Version 0.75 to 0.76 (13-APR-2000)
++====================
++
++Bug fixes
++---------
++
++ - ttcp_atm declared port as "short" instead of "unsigned short", yielding
++ confusing diagnostic output
++
++New features
++------------
++
++ - upgraded to the 2.3.99-pre5 kernel
++
++Other changes
++-------------
++
++ - eliminated eni_send-tasklet synchronization
++ - PCA200: merged unconditional #inclusion of linux/pci.h from pre5
++
++
++Version 0.74 to 0.75 (7-APR-2000)
++====================
++
++Bug fixes
++---------
++
++ - ENI: moved send operation into tasklet to correct synchronization (reported
++ by Heikki Vatiainen)
++ - MPOA: possible deadlock fix (by Heikki Vatiainen)
++ - atm_vcc_flags_t was too small on PPC, causing an overlap with vcc->family
++ (fixed by Chas Williams)
++ - CLIP: needs spin_lock_irqsave instead of only spin_lock (by Rui Prior)
++ - CLIP: clip_push may be called from an interrupt, so the kfree_skb has to
++ become dev_kfree_skb_any (by Heikki Vatiainen)
++
++Other changes
++-------------
++
++ - removed INCLUDES from atm/ilmid/asn1/Makefile (suggested by Jean Marc
++ Lacroix)
++ - atm/maint/Makefile no longer special-cases atmdiag.c (suggested by Jean Marc
++ Lacroix)
++
++
++Version 0.73 to 0.74 (2-APR-2000)
++====================
++
++Bug fixes
++---------
++
++ - atm_poll tried to sleep on two wait queues, which is no longer possible.
++ Removed vcc->wsleep to solve this. (Reported by Joseph Gooch)
++ - lec.c:lec_arp_clear_vccs changed the VCC flags of the wrong VCC, fortunately
++ only in commented-out code
++ - major revision of MPOA ingress and egress cache locking (Heikki Vatiainen)
++
++Other changes
++-------------
++
++ - removed last remnants of bogus bridging lock from lane_mpoa_init.c
++ (reported by Heikki Vatiainen)
++ - removed last traces of TNET1570A driver
++ - atmdev_init still knew about ENI, but ENI now uses new-style initialization
++ - improved Fore 200E configuration to catch useless settings already at
++ configuration time (by Christophe Lizzi)
++
++
++Version 0.72 to 0.73 (29-MAR-2000)
++====================
++
++Bug fixes
++---------
++
++ - ambassador.c and horizon.c had module loading races (fixed by Giuliano
++ Procida)
++ - fore200e: one set_bit was accidently converted to clear_bit, preventing VCs
++ from being opened (fixed by Christophe Lizzi)
++
++Other changes
++-------------
++
++ - fore200e: moved interrupt handler work to tasklet (by Christophe Lizzi)
++ - fore200e: fixed SBUS DMA direction flags (by Christophe Lizzi)
++ - fore200e: the compile no longer fails when the driver is compiled without
++ any hardware support (and displays a warning; by Christophe Lizzi)
++ - oops, atm/README was lagging behind a few versions
++
++
++Version 0.71 to 0.72 (25-MAR-2000)
++====================
++
++Bug fixes
++---------
++
++ - fore200e.h and lec.h didn't #include <linux/config.h> (fixed by David S.
++ Miller ?)
++ - atmloop.c always assumed -q to be present
++
++New features
++------------
++
++ - upgraded to the 2.3.99-pre3 kernel
++
++Other changes
++-------------
++
++ - kernel patch still included wd.c hack (reported by David S. Miller)
++ - removed bogus initialization of skb->rx_dev (spotted by Alexey Kuznetsov)
++ - removed bogus lane_bridge_hook_lock (by Heikki Vatiainen)
++ - added sparc64 support for ATM_QUERYLOOP (by Christophe Lizzi)
++ - minor Fore driver cleanup (by Christophe Lizzi)
++ - eni.c: moved interrupt handler work to tasklet
++
++
++Version 0.70 to 0.71 (21-MAR-2000)
++====================
++
++Bug fixes
++---------
++
++ - eni.c: fixed potential SMP deadlock on tx_wait
++ - clip.c and lec.c didn't initialize skb->rx_dev
++ - net/atm/svc.c:svc_connect left wait entry in queue on return in some cases
++ - idiot bug in skb_migrate caused weird crashes
++ - atmloop usage erroneously claimed -s was optional
++
++New features
++------------
++
++ - upgraded to the 2.3.99-pre2 kernel
++ - added atmloop.8 man page
++ - added enqueuing result NET_XMIT_BYPASS for qdiscs that send packets on a
++ path without dequeue (e.g. sch_atm)
++
++Other changes
++-------------
++
++ - ambassador.c: removed warnings when compiling with CONFIG_SMP (by Giuliano
++ Procida)
++ - changed drivers/atm target from atm.a to atm.o, to make initcalls work
++ - converted eni.c to use pci_register_driver and initcall
++ - cleaned up #ifdef hell in net/atm/signaling.c:sigd_put_skb
++
++
++Version 0.69 to 0.70 (20-MAR-2000)
++====================
++
++Bug fixes
++---------
++
++ - LEC compilation as a module still left it in the kernel
++
++Other changes
++-------------
++
++ - moved LANE-bridging interface code from lec.c to lane_mpoa_init.c (by
++ Heikki Vatiainen)
++ - made SONET and ATM statistics counters atomic to avoid cli() when reading
++ (not updated: similar mechanism in idt77105.c and private shadow statistics
++ of ambassador.c)
++ - changed access to VCC and device flags (ATM_VF_* and ATM_DF_*) to bit set
++ operations
++ - changed flag types to structs to fail compilation of old code
++ - changed last argument of atm_dev_register to a pointer to a bit set for
++ easier migration
++ - net/atm/*.c: eliminated all sleep_on and cli (except in lec.c)
++ - ditto for eni.c and suni.c
++ - corrected indentation of some "permanent" debugging code in zatm.c
++ - made skb_migrate partially atomic, obsoleting yet another cli() in clip.c
++
++
++Version 0.68 to 0.69 (19-MAR-2000)
++====================
++
++Bug fixes
++---------
++
++ - ambassador.c: corrected location of initial PLX window for use on Alpha (by
++ Giuliano Procida)
++ - zeppelin: fixed address initialization (found by Christophe Lizzi)
++ - atmsigd.conf man page erroneously described the option "q.2963.1" as
++ "q2963_1"
++ - LANE didn't compile when bridging was enabled (fixed by Heikki Vatiainen;
++ note that bridging also needs an update which is being merged via the
++ mainstream kernel)
++
++New features
++------------
++
++ - atmsigd: added command-line option -u to set the UNI mode
++ - added ioctl ATM_QUERYLOOP to determine supported loopback modes
++ - added atmloop(8) option -q
++
++Other changes
++-------------
++
++ - added CREDITS entry of Giuliano Procida
++ - various cosmetic changes to horizon.c (by Giuliano Procida)
++ - ambassador.c: various bits of cleanup (by Giuliano Procida)
++ - added -S <tos> option to ttcp_atm to set the IPv4 TOS byte (this is not
++ really related to ATM)
++ - changed loopback mode values to a bit set
++ - idt77105_ioctl: returned sizeof(int) instead of 0 on ATM_GETLOOP
++ - added phy_ops->stop to suni.c and uPD98402_stop, cleaned up suni.c in the
++ process
++ - removed (very obsolete) mmuio.o from net/atm/Makefile
++
++
++Version 0.67 to 0.68 (28-FEB-2000)
++====================
++
++Bug fixes
++---------
++
++ - removed potential dev_kfree_skb(NULL) from *_send of eni.c, zatm.c, iphase.c
++ - eni.c, zatm.c, iphase.c sometimes returned PCI error codes instead of errno
++ codes
++ - arpd/io.c could try to de-reference entry->addr with addr == NULL (fixed by
++ Thomas Dietz)
++ - LANE copied more than dev->addr_len address bytes (fixed by Heikki
++ Vatiainen)
++ - sch_atm didn't remove filters on destroy
++ - fixed typo in esi.c error message
++ - esi.8 claimed to be the man page of atmarp, and it wasn't installed
++ - added checking for VPI/VCI when sending AAL0 cells (by Mitchell Blank)
++ - atmtcp allowed sending on receive-only VCs
++ - various ioctl permission checks were missing (fixed by Mitchell Blank)
++ - fore200e.c and horizon.c didn't always free skbs on send error (fixed by
++ Mitchell Blank)
++ - included an ugly hack to fix the wd.c driver that was broken around 2.3.47
++ (not related to ATM at all...)
++
++New features
++------------
++
++ - upgraded to the 2.3.48 kernel
++ - added device-independent SAR/PHY loopback setting interface (with many good
++ ideas from Greg Banks and Mitchell Blank), and removed old loopback ioctls
++ - new utility atmloop to set loopback mode
++ - added "stop" to atmphy_ops (requested by Mitchell Blank)
++
++Other changes
++-------------
++
++ - mkdiff can now also use pre-release kernels
++ - changed *kfree_skb to dev_kfree_skb_{irq,any} in eni.c, zatm.c, and raw.c,
++ where necessary (with help from Heikki Vatiainen)
++ - changed {dev_,}kfree_skb to dev_kfree_skb_any in ambassador.c, horizon.c,
++ iphase.c, and nicstar.c (needs further cleanup)
++ - softnet updates for LANE (by Heikki Vatiainen)
++ - fixed firmeware license of Fore 200E driver and general 0.46/0.47 updates
++ (Christophe Lizzi)
++ - more CREDITS file additions
++ - softnet updates for sch_atm
++ - softnet updates for CLIP (also cleaned up flow control for > 1 VCC/itf;
++ reported by Alexey Kuznetsov)
++ - updated documentation for iproute2-2.2.4-now-ss000225 and streamlined the
++ build procedure
++ - PCI DMA updates for ENI driver
++ - changed the default install location of executables and man pages from
++ /usr/local to /usr
++ - make install no longer installs align, aping, br, bw, delay, isp, svctor,
++ sw_debug, sw_tcp, swc, and window
++ - eni.c: made highly controversial aal5 = ... line more readable
++ - moved /proc/atm to /proc/net/atm
++ - added vcc->send function to allow for AAL-specific processing (may be set
++ to dev->ops->send)
++ - atm_do_connect_dev now calls bind_vcc before AAL initialization to make
++ vcc->dev available
++ - change_qos no longer allows changing of AAL or traffic class (by Mitchell
++ Blank)
++ - changes for new loopback support to fore200e driver and sparc64 code (by
++ Christophe Lizzi)
++
++
++Version 0.66 to 0.67 (2-FEB-2000)
++====================
++
++New features
++------------
++
++ - upgraded to 2.3.42
++ - added sunimode utility to set SUNI loopback mode (by Christophe Lizzi)
++
++Other changes
++-------------
++
++ - removed unused variable warning in net/sched/sch_atm.c
++ - changed ENI_SETMULT from ATMIOC_SARPRV+1 to ATMIOC_SARPRV+7
++ - changed atmarpd's complaint about VCC-less non-ATMARP-server entries from
++ DIAG_ERROR to DIAG_INFO (the condition is okay for an ATMARP server)
++
++
++Version 0.65 to 0.66 (31-JAN-2000)
++====================
++
++Bug fixes
++---------
++
++ - atmsigd crashed on reception of as_accept, etc., because of inverted NULL
++ pointer test (reported by Kevin Vargo, Rui Prior, fixed by Julian Cable)
++ - fixed various SPARC build problems (by Christophe Lizzi)
++ - atmsigd insisted that calling party number is local in switch mode
++ - debug switch didn't initialize any ports
++ - net/atm/signaling.c:sigd_enq didn't properly zero the message, yielding
++ kernel pointers partially containing junk
++ - accept(2) didn't copy local ATM address to VCC descriptor (reported by
++ Pedro Brandao)
++ - ilmid/io.c didn't compile on SPARC (reported by Christophe Lizzi)
++ - usage.txt didn't define the %: macro, leaving garbage in usage.txt
++
++New features
++------------
++
++ - upgraded to 2.3.41
++ - Fore 200E driver now also works for SBA-200E (by Christophe Lizzi)
++
++Other changes
++-------------
++
++ - added various CREDITS entries
++ - changed TIOC{IN,OUT}Q to SIOC{IN,OUT}Q (no user space rebuild required;
++ the values are identical)
++ - added script atm/switch/tcp/mkfiles for automatic extraction of
++ configuration files
++ - atmsigd called ATM_GETLINKRATE "ATM_GETLINERATE" in complaints
++ - atmsigd tried to obtain link speed in switch mode, although it's not used
++ - Ambassador NIC: various files still had the wrong copyright/licensing text
++ (patch by Giuliano Procida)
++
++
++Version 0.64 to 0.65 (21-JAN-2000)
++====================
++
++Bug fixes
++---------
++
++ - fixed 32/64 bit %p formatting problem in /proc/atm/vc
++ - atmtcp: fixed RX/TX statistics (by Jens Axboe)
++ - sparc64-specific ioctl 32/64 bit marshalling fixes (by Christophe Lizzi,
++ with further improvements by Jens Axboe)
++ - zeppelin -l option handling (reported by Mike Prudence, fixed by Heikki
++ Vatiainen)
++ - mkpatch didn't include drivers/atm/eni.h
++ - updated eni.h (tx->backlog_len was missing)
++ - fixed various uint32_t build problems of user space tools by including
++ atm.h before anything other ATM headers (first reported by Rashmi Dravid)
++ - "natmtcp virtual" didn't parse the command line properly
++ - natmtcp's TCP link changed VPI/VCI to 0.0 on close
++ - CLIP: fixed crash after sending ARP (reported by Rui Prior)
++
++New features
++------------
++
++ - upgraded to 2.3.40 (with help from Jens Axboe)
++ - added sparc64 changes for ENI driver (by Heikki Vatiainen)
++ - added the Fore PCA-200E(/SBA-200E) driver (by Uwe Dannowski and Christophe
++ Lizzi)
++ - added the Interphase ATM PCI (i)Chip (x575, x525, x531, etc.) driver (by
++ Monalisa Agrawal and Peter Wang)
++ - added ABR fields to struct atm_trafprm (by Peter Wang)
++ - nicstar driver now supports setting of the CLP bit (by Rui Prior)
++ - added ENI_SETMULT ioctl and enitune utility to change ENI buffer size
++ multipliers at run time
++
++Other changes
++-------------
++
++ - atmsigd: changed default UNI version from 3.0 to dynamic (which defaults
++ to 3.0)
++ - atmtcp: removed ugly ../../net/atm/protocols.h include
++ - ioctls now internally return -ENOIOCTLCMD if ioctl command number is not
++ recognized
++ - removed ATM_CREATE_LEAF ioctl (wasn't used and suggested the wrong design
++ approach anyway)
++ - updated README.DRIVERS
++ - natmtcp now uses port 2812 (assigned by IANA)
++ - moved Documentation/atm.txt to Documentation/networking
++ - improved atm_kptr_int_t for non-Sparc architectures (by Christophe Lizzi)
++ - removed two compiler warnings from nicstar.c
++ - some minor nicstar cleanup (by Rui Prior)
++ - added "vbr" and "abr" to text2qos/qos2text ("vbr" not used for anything
++ right now)
++ - natmtcp: added commands "create", "remove", "switch", corresponding to
++ options -p, -r, and -s of atmtcp
++ - natmtcp: added link type "print" (write PDU content to stdout)
++ - natmtcp: now uses atm_kptr_int_t for VCC kernel pointer instead of unsigned
++ long
++ - added apologetic man page for natmtcp
++ - renamed natmtcp to atmtcp and removed the old atmtcp
++ - changed some user-space code to avoid patronizing "ambiguous `else'"
++ warnings from egcs, adding as few ugly redundant curly braces as possible
++ - fixed some other compiler warnings
++ - kernel part: trimmed operations structure initializers which consisted
++ mainly of NULL pointers
++ - kernel pointers sent as opaque references to user space are now of type
++ atm_kptr_t. Added support functions kptr_eq and kptr_print. (With help from
++ Richard Johnson and Mitchell Blank)
++ - removed various "overriding commands" warnings in user-space build process
++ - mkdist now creates arcvie in current directory if ~/l/arch doesn't exist
++ - make clean && make now works also if dependencies are present (make clean
++ used to remove sigd/q.out.h, which the dependencies required)
++ - atmtcp uses command bg instead of -b for backgrounding. Also, listen-bg
++ listens and backgrounds before calling accept.
++
++
++Version 0.63 to 0.64 (1-DEC-1999)
++====================
++
++Bug fixes
++---------
++
++ - atmapi.h logic was still wrong (fixed by Christophe Lizzi)
++ - LANE: fixed BUS filtering and net/atm/lec.c cleanup (by Heikki Vatiainen)
++ - arpd/io.c assumed that diag() preserves errno
++ - atmarpd didn't include QOS in output if getsockopt failed
++
++New features
++------------
++
++ - /proc/atm/eni:* now also shows transmit queue and backlog length
++ - added option "sndbuf" to atmarp
++ - added option "sndbuf" to tc ... atm ...
++ - /proc/atm/vc lists internal details for all VCs (flags, buffers, etc.);
++ added ATM_VF2TXT_MAP to atmdev.h to allow translation of flag values
++
++Other changes
++-------------
++
++ - ATM now uses sk->sndbuf/rvcbuf instead of atm_vcc->tx_quota/rx_quota
++ - removed rx_quota hack from zatm.c
++ - removed net/atm/tunable.h
++ - CLIP and sch_atm now only send packets if the VC's send queue allows them to
++ - implemented correct "requeue" function in sch_atm
++ - updated zeppelin(8) man page (Heikki Vatiainen)
++ - atmarp: atmarp -q qos_spec usage is obsolete; use atmarp -q qos qos_spec
++ instead
++ - /proc/atm/svc now prints "N/A@xxxxxxxx" instead of "Unassigned", with the
++ address of the descriptor in xxxxxxxx
++ - removed all traces of CONFIG_MMU_HACKS
++ - obsoleted ATM_SETSC (single-copy control)
++
++
++Version 0.62 to 0.63 (22-NOV-1999)
++====================
++
++Bug fixes
++---------
++
++ - horizon.c: cleared weird rate_lock/rates_lock patch conflict
++ - saaldump output formatting was completely wrecked; added option -q for
++ "quiet" output (no Q.2931 printing)
++ - fixed LANE Ethernet interface MTU mapping (patch by Rob Scott)
++ - atmsigd incorrectly rejected CONNECTION AVAILABLE (Q.2963.1)
++ - SVC address was wrong in /proc/atm/arp if using private and public part
++ - RESTART ACKNOWLEDGE was not sent with the correct global call reference
++ value (reported by Peter Ryan)
++ - zatm: usec timestamps need 64 division of x86, so this option must be
++ unavailable on other architectures (reported by Matti Aarnio)
++ - nicstar: added "fix3" and "fix4" (by Rui Prior)
++ - LANE: non-proxy didn't filter packets coming from BUS (fix by Marko Kiiskila
++ and Heikki Vatiainen)
++
++New features
++------------
++
++ - upgraded to kernel version 2.3.28
++ - atmtcp now reports VC open/close and generates timestamps (Note: the
++ protocol used between the kernel and the atmtcp utility has changed)
++ - new utility "natmtcp" which combines the ATMTCP protocol, ATMTCP ("virtual")
++ interfaces, "real" ATM interfaces, and log files (experimental)
++ - added ILMI 4.0 MIB variables atmfPortMyIdentifier and atmfMySystemIdentifier
++ (by Thomas Seidel)
++ - zeppelin: new command line option -I to select interface, allowing the use
++ of LANE with multiple physical interfaces (by Heikki Vatiainen)
++ - UltraSparc (sparc64) support (by Christophe Lizzi)
++ - nicstar: added IDT77105 PHY support (by Greg Banks)
++ - added utility loop25 to control ForeRunner LE loopback mode (by Greg Banks)
++ - added support for DNS lookup of NSAP addresses (by Rui Prior)
++ - added utility debug/dnstest (by Rui Prior)
++
++Other changes
++-------------
++
++ - net/atm/tunable.h cleanup
++ - removed SO_BCTXOPT, SO_BCRXOPT, and struct atm_buffconst
++ - removed obsolete field "next" from struct atm_blli
++ - changed potentially unaligned 32 bit accesses in SAAL to use read_netl
++ (spotted by Christophe Lizzi)
++ - added __attribute__ ((aligned(8))) to many structures containing structures
++ which are shared by kernel and user space to enfore uniform packing on
++ sparc64 (with help from Christophe Lizzi)
++ - changed unsigned long to unsigned int at API for compatibility with
++ architecture where sizeof(long) differs between user and kernel space
++ (e.g. sparc64; suggested by Christophe Lizzi)
++ - changed struct atmsvc_msg.{vcc,listen_vcc} from unsigned long to new type
++ atm_kptr_int_t; changed atmsigd accordingly (NB: debugging output may strip
++ upper bits)
++ - changed various casts pointer->int to pointer->long->int (where the pointer
++ does indeed only contain an int, e.g. in ioctl) for Alpha (reported by
++ Matti Aarnio)
++ - nicstar: changes card->membase from u32 to unsigned long
++ - added __attribute__ ((unused)) to mpc.c and mpoa_caches.c to remove
++ warnings about variables used only for debugging
++ - drivers/atm/Config.in: changed ! "$foo" = "x" to "$foo" != "x"
++
++
++Version 0.61 to 0.62 (27-AUG-1999)
++====================
++
++Bug fixes
++---------
++
++ - lib/diag.c:set_logfile didn't set log_to_initialized (reported by Lars
++ Burgstahler)
++ - sch_atm did not use classifiers attached to the x:0 class (reported by Lars
++ Burgstahler)
++ - net/atm/atm_misc.c EXPORT'ed atm_return, which is an inline function (fixed
++ by Mitchell Blank)
++ - work-around for SO_LEVEL range problems (by Mitchell Blank)
++ - nicstar oops fix (by Rui Prior and John Brosnan)
++ - nicstar should now work also as non-module (by Rui Prior)
++ - nicstar fix for chip bug showing up on 64-bit CPCI bus systems (by Jay
++ Talbott)
++ - cleared confusion about inclusion of suni.o when building both nicstar and
++ ENI
++ - suni.c now always exports suni_init
++ - various fixes and cleanups in the Madge drivers (by Giuliano Procida)
++ - fixed new set of atm_pdu2truesize problems by introducing atm_alloc_charge
++ which handles the allocation too (problem report and work-around by Alexey
++ Kuznetsov)
++ - getsockname on unbound PVC socket caused an oops
++ - LANE: Token Ring source route bridge support fix (by Heikki Vatiainen)
++
++New features
++------------
++
++ - upgraded to kernel version 2.3.15 (mainly by Alexey Kuznetsov and Mitchell
++ Blank)
++ - new socket option SO_ATMPVC to retrieve the "PVC" address (PVC & SVC) (based
++ on a patch by Jay Talbott)
++ - zeppelin -l now also accepts only the selector byte (by Robert Slaski)
++
++Other changes
++-------------
++
++ - removed obsolete drivers/atm/nicstar.c.old_skb
++ - removed all references to Arequipa (obsolete)
++ - SO_BCTXOPT/SO_BCRXOPT are now obsolete, given that the final verdict on page
++ flipping has been spoken in linux-kernel
++ - interface statistics are now counted in struct net_device_stats instead of
++ struct enet_statistics (by Mitchell Blank)
++ - added pointer to mailing list to Documentation/atm.txt
++ - Documentation/Configure.help now points to Documentation/atm.txt instead of
++ directly to the Web page.
++ - usage.tex: clarified the consequences of interrupting atmtcp
++ - changed the highly misleading "atmarpd:ITF: no such interface" message to
++ DIAG_DEBUG
++
++
++Version 0.60 to 0.61 (11-JUN-1999)
++====================
++
++Bug fixes
++---------
++
++ - nicstar: driver sometimes crashed when starting for 25 Mbps cards (Rui
++ Prior)
++ - Zeitnet driver: uPD98402.c wasn't compiled with -DEXPORT_SYMTAB when
++ building as a module
++ - net/atm/raw.c didn't export atm_init_aal5, so ATMTCP didn't load as a module
++ - atmtcp could still be accessed after loading and then unloading, yielding an
++ Oops
++
++Other changes
++-------------
++
++ - PPC configuration now also includes ATM (Jay Talbott)
++ - lots of cleanup in the Madge drivers (Giuliano Procida)
++ - tamed down a bit the tone in README
++
++
++Version 0.59 to 0.60 (3-JUN-1999)
++====================
++
++New features
++------------
++
++ - upgraded to kernel version 2.3.3 (main change is slightly different wait
++ queue handling; affects all drivers)
++
++Other changes
++-------------
++
++ - mkdiff script now takes .bz2 kernel if no .gz can be found
++ - made a few changes to the Madge drivers to reduce the number of warnings
++
++
++Version 0.58 to 0.59 (3-JUN-1999)
++====================
++
++New features
++------------
++
++ - upgrade to kernel version 2.2.9
++ - zeppelin now adjusts MTU when joining ELAN (Heikki Vatiainen)
++
++Other changes
++-------------
++
++ - adjusted tr interface name limit to 8 characters (down from a wasteful 9)
++
++
++Version 0.57 to 0.58 (3-JUN-1999)
++====================
++
++Bug fixes
++---------
++
++ - ENI drivers sometimes directly dereferenced pointers instead of using readl/
++ writel (fixed by Mitchell Blank)
++ - nicstar driver no longer uses floating point (fixed by Rui Prior)
++ - nicstar driver may have refused CBR VC in some cases even with enough
++ bandwidth available (fixed by Rui Prior)
++ - usage.tex failed to build (fixed by Bill Brooks)
++ - zeppelin got byte order in BLLI wrong (reported by Chas Williams; fixed by
++ Mitchell Blank and Heikki Vatiainen)
++ - zeppelin did not work when the host had multiple ATM addresses (reported by
++ Benoit Steiner; fixed by Heikki Vatiainen)
++ - zeppelin incorrectly parsed -i command line option (reported by Benoit
++ Steiner; fixed by Heikki Vatiainen)
++ - atm_connect_vcc and /proc/atm/pvc report AAL0 now properly (reported by Zhu
++ Qun Ying and Uwe Dannowski)
++
++New features
++------------
++
++ - nicstar driver now support SONET diagnostics (by Rui Prior)
++ - nicstar driver now works on PowerPC (by Jay Talbott)
++ - LANE now also supports Token Ring (Heikki Vatiainen, with testing by
++ Holger Smolinski)
++
++Other changes
++-------------
++
++ - major non-i386 architecture and other cleanup in ENI driver (by Mitchell
++ Blank)
++ - number of lec devices is 40+8 (lec0-lec39 are Ethernet and lec40-lec47 are
++ Token Ring; Heikki Vatiainen)
++ - lec.c and mpc.c now use atm_force_charge (Heikki Vatiainen)
++ - net/802/tr.c limited interface names to 4 characters (fixed by Heikki
++ Vatiainen)
++ - zeppelin man page updated (Heikki Vatiainen)
++ - "zeppelin.new" is now "zeppelin", the old "zeppelin" is gone
++ - set "atm_connect" printk to KERN_DEBUG
++ - removed ATM_SAAL from include/linux/atm.h (there never was any support for
++ SAAL in the kernel)
++
++
++Version 0.56 to 0.57 (18-MAY-1999)
++====================
++
++Bug fixes
++---------
++
++ - atmarpd complained "invalid control msg type" when changing interface
++ characteristics (reported by Soo-Khim Ho)
++ - sch_atm didn't compile without CLIP (reported by Zhu Qun Ying)
++ - LANE & MPOA: plugged a few memory leaks after failure to atm_charge (Heikki
++ Vatiainen)
++ - mpcd could not be killed if MPS's address was not known (fixed by Heikki
++ Vatiainen)
++ - nicstar: fixed the sleeping in interrupt issue (Rui Prior)
++
++New features
++------------
++
++ - drivers for the Madge "Ambassador" and "Horizon [Ultra]" NICs, also known
++ as Collage PCI 155 Server, 25, and 155 Client (by Giuliano Procida)
++
++Other changes
++-------------
++
++ - MPOA code cleanup and debugging printks are now conditional (Heikki
++ Vatiainen)
++ - removed both led/USAGE files
++ - removed the old atmsigd (was in atm/sig.old/)
++ - nicstar driver now works around TSQ bug on older chips (77201) (by Rui
++ Prior, with the detective work by Jay Talbott)
++
++
++Version 0.55 to 0.56 (22-APR-1999)
++====================
++
++Bug fixes
++---------
++
++ - atm/doc/Makefile assumed . to be included in PATH when invoking rlatex
++ (fix by Heikki Vatiainen)
++ - usage.txt leaked Arequipa configuration examples (fix by Heikki Vatiainen)
++ - plugged a small memory leak in led.new which occurred when using the LANE
++ client as a proxy (Heikki Vatiainen)
++ - atmarpd crashed when printing ATMARP table entries with flag 0x8000 set
++ (reported by Vinay Kulkarni)
++ - CLIP interfaces now follow netmask changes
++ - Nicstar: 25.6 Mbps cell rate corrected (by Rui Prior)
++ - atm_equal could loop forever when comparing NSAP-encoded E.164 addresses
++ (reported by Valley Zhizhkun)
++ - [AP]F_ATM[PS]VC definitions in lib/atm.h conflicted with glibc 2.1
++ (reported by Heikki Vatiainen and Jens Vagelpohl)
++ - changed a few non-int main to int main (reported by Heikki Vatiainen)
++ - changed lib/diag.c work with glibc 2.1, where stderr is no longer a constant
++ (based on a patch by Heikki Vatiainen, also reported by Giuliano Procida)
++ - make clean didn't remove qgen/q.test.c, qgen/qd.out.h, qgen/qd.test.c,
++ sigd/q.out.h and sigd.old/q.out.h (reported by Giuliano Procida)
++ - optional headers were installed even with system headers present if
++ INSTROOT was different from / (reported by Giuliano Procida)
++ - lib/stdint.h was used even on systems that had a "real" stdlib.h (based on a
++ patch by Heikki Vatiainen, also reported by Giuliano Procida)
++ - renamed net/atm/misc.c to atm_misc.c to avoid name clash with
++ drivers/char/misc.c on include/linux/modules/misc.* (reported by Borek
++ Lupomesky)
++
++New features
++------------
++
++ - new ioctl ATM_GETLINKRATE to query link rate of an interface (suggested by
++ Vitaly Lavrov)
++ - new atmsigd.conf option io max_rate to specify rate to signal if
++ application requests the "maximum"
++ - added decription of CONFIG_ATM_LANE and CONFIG_ATM_MPOA to the kernel
++ configuration help (Heikki Vatiainen)
++ - added description of LANE to usage.tex (Heikki Vatiainen)
++ - new function atm_force_charge to unconditionally add data to a receive
++ buffer
++
++Other changes
++-------------
++
++ - atmsigd now determines maximum link rate by querying interfaces (suggested
++ by Vitaly Lavrov)
++ - moved local address registry from a global table to VPCI structures
++ - changed unknown net device notification severity from KERN_ERR to
++ KERN_WARNING
++ - atmarpd now overwrites old atmarpd.table on startup (it used to keep it
++ until the first configuration change)
++ - shutdown(2) of native ATM VCs now returns 0 instead of -EOPNOTSUPP
++ (suggested by Mitchell Blank)
++ - Nicstar: IRQ sharing is now allowed (by Rui Prior)
++ - Nicstar: default maximum number of cards is now 4 (by Rui Prior)
++ - Nicstar: when compiled as a module, the driver may no longer be removed
++ while in use (by Rui Prior)
++ - Nicstar: loss of cells is no longer reported as a plain CRC error (by Rui
++ Prior)
++ - atmsigd now always clears the endpoint reference flag if in UNI 3.0 mode
++ (based on a patch by Heikki Vatiainen)
++
++
++Version 0.54 to 0.55 (1-MAR-1999)
++====================
++
++Bug fixes
++---------
++
++ - SELECT_TOP_PCR didn't take intro account the "pcr" field, causing SVC with
++ QoS pcr=xxx to be set up at link speed
++ - qos_equal didn't detect differences in the "pcr" fields
++ - sch_atm only accepted parent == root or absent (reported by John Loughney)
++ - sch_atm:atm_tc_put accessed flow structure after kfree'ing it
++ - sch_atm:atm_tc_change didn't put excess traffic class if class creation
++ failed
++ - sch_atm:atm_tc_dump_class didn't return class ID in tcm->tcm_handle
++ - sch_atm:atm_tc_delete refused to delete classes because it expected
++ ref == 1, but ref == 2 (reported by John Loughney)
++
++
++Version 0.53 to 0.54 (19-FEB-1999)
++====================
++
++Bug fixes
++---------
++
++ - led.new: fixed build problem and warning (Heikki Vatiainen)
++ - fixed LANE arp cache timeouts (Heikki Vatiainen)
++ - ilmid -i option fell through into -l, causing logging to go into a file
++ named after the local address
++ - flipping the highest bit of ep_ref made it negative which was erroneously
++ interpreted to mean "absent" (reported by Giuliano Procida and Chas
++ Williams)
++ - ilmid used the result of AsnOidCompare inconsistently, causing network
++ prefix registration to fail with some switches (based on a patch by Giuliano
++ Procida)
++
++New features
++------------
++
++ - tc:q_atm: new option "clip" to select Classical IP processing of inbound
++ traffic
++ - new sch_atm class attribute TCA_ATM_STATE to retrieve VC state
++
++Other changes
++-------------
++
++ - led.new: improved handling of LANE flush protocol (Heikki Vatiainen)
++ - copied USAGE from led/ to led.new/
++ - added description of ilmid options -i and -u to USAGE (Heikki Vatiainen)
++ - ilmid -u now also works without -DDYNAMIC_UNI (all values but the default
++ are refused)
++ - tcpdump patch updated to tcpdump version 3.4 (Heikki Vatiainen)
++ - updated "tc" patch to iproute2 version 2.1.99-now-ss990203
++
++
++Version 0.52 to 0.53 (9-FEB-1999)
++====================
++
++Bug fixes
++---------
++
++ - atmsigd: selecting the UNI version via compile-time options didn't yield
++ the desired result in some cases (reported by Vinay Kulkarni and others)
++ - ATM VCCs now use struct sock, as required by protocol-independent layer
++ starting with recent 2.1 kernels (by Mitchell Blank)
++ - led fixes: htons/htonl bugs in LANEv2 code, one duplicate close() removed
++ (by Heikki Vatiainen)
++
++New features
++------------
++
++ - upgraded to the 2.2.1 kernel (by Mitchell Blank)
++ - LANE: added bridging support (by Heikki Vatiainen)
++ - complete rewrite of led (in led.new), which is now leaner and no longer
++ contains code (c) Digital (by Heikki Vatiainen)
++ - added macros for local AESA format and group addresses, and support in
++ atm2text (by Heikki Vatiainen)
++
++Other changes
++-------------
++
++ - ENI: buffer sizes are now limited to MID_MAX_BUF_SIZE even if max_sdu >
++ MID_MAX_BUF_SIZE/3 (reported by Andrew Lunn)
++ - plenty of NICStAR changes (Rui Prior and Mitchell Blank)
++ - LANE interface to upper layer looks more like Ethernet, so adding bridge and
++ 802.1Q support is easier, and tcpdump does not need any extra patches (by
++ Heikki Vatiainen)
++
++
++Version 0.51 to 0.52 (5-DEC-1998)
++====================
++
++Bug fixes
++---------
++
++ - atmsigd crashed when receiving STATUS ENQUIRY for call in Null state
++ (reported by Heikki Vatiainen)
++ - outbound endpoint reference didin't have the 16th bit toggled (fixed by
++ Andrew Lunn)
++ - lec.c: fixed a bug in kernel which could cause kernel part to deadlock when
++ signalling was not started successfully (by Heikki Vatiainen)
++ - MPOA: bug fixes and other changes, see atm/mpoa/CHANGELOG (by Heikki
++ Vatiainen)
++
++New features
++------------
++
++ - LANE: both kernel & daemon: support for ELANs which have MTUs greater than
++ 1516 (by Eric H. Kinzie)
++ - MPOA: can now ask LECS for configuratino information (by Heikki Vatiainen)
++
++Other changes
++-------------
++
++ - zeppelin.8: updated (Heikki Vatiainen)
++
++
++Version 0.50 to 0.51 (6-NOV-1998)
++====================
++
++Bug fixes
++---------
++
++ - atmsigd: typo prevented kernel.c from compiling with UNI30 disabled (fix by
++ Andrew Lunn and Uwe Dannowski)
++ - option -u crashed ilmid (reported by Michael Wolf)
++
++Other changes
++-------------
++
++ - bearer capability is now set to "CBR" for CBR (suggested by Heikki
++ Vatiainen)
++
++
++Version 0.49 to 0.50 (3-NOV-1998)
++====================
++
++Bug fixes
++---------
++
++ - atmsigd didn't compile for -DUNI31 -DALLOW_UNI30 (fixed by Richard Gooch)
++ - atmsigd crashed on as_bind and also had problems with as_connect after
++ as_bind (reported by Heiko Krupp, Heikki Vatiainen, and many others)
++
++Other changes
++-------------
++
++ - atmsigd now enables tracing by default (use -t 0 to turn it off)
++ - added "terminate" message to test/isp
++ - mpoad defaults to UBR if service category is absent (by Heikki Vatiainen)
++ - LANE now avoids blocking intact connections when other connections have
++ problems by queuing packets independently per destination while waiting for
++ a connection (by Heikki Vatiainen)
++
++
++Version 0.48 to 0.49 (1-NOV-1998)
++====================
++
++Bug fixes
++---------
++
++ - q_atm.c passed TCA_ATM_EXCESS even if zero, while the kernel expected it
++ to be absent in this case (changed q_atm.c)
++ - q_atm: tc class show didn't separate fields properly with blanks
++ - removed double inclusion of atm/config from mkdist
++
++New features
++------------
++
++ - upgraded to the 2.1.126 kernel
++
++Other changes
++-------------
++
++ - "new" atmsigd is now the default (atm/sigd got renamed to atm/sigd.old,
++ atm/sigd.new to atm/sigd)
++ - updated extra/tc/README
++
++
++Version 0.47 to 0.48 (30-OCT-1998)
++====================
++
++Bug fixes
++---------
++
++ - ilmid didn't recognize the -u option
++ - ATM_GETCIRANGE copied wrong amount of data (fix by Heikki Vatiainen)
++ - sch_atm didn't compile without policing enabled (reported by Calin Poenaru)
++ - BHLI octets: qgen/msg.fmt allowed nine instead of eight bytes for ISO and
++ user specified, include/linux/atmsap.h:ATM_MAX_HLI was 7 instead of 8 (by
++ Damian Gilmurray and Paisit Thamsakorn)
++ - MPOA: bug fixes and other changes, see atm/mpoa/CHANGELOG (by Heikki
++ Vatiainen)
++
++New features
++------------
++
++ - ilmid: new option -i to set local IP address (suggested by Andrew May)
++ - ilmid now also supports the MIB variables atmfAtmLayerMaxVpiBits and
++ atmfAtmLayerMaxVciBits (based on a patch by Uwe Dannowski)
++
++Other changes
++-------------
++
++ - ilmid: search for local IP address didn't consider LANE interfaces (lec*)
++ - consolidated most of the various calls to gethostbyname and friends into
++ text2ip (libatmd)
++ - corrected some glitches in net/sched/sch_atm.c (untested)
++ - removed debug/encopy, debug/endump, and debug/zndump from the distribution.
++ They were almost useless and caused problems with make depend
++ - SYMFILES in qgen/Makefile now determines location of atmsap.h at run time to
++ avoid problems when kernel headers are not in /usr/include/linux (reported
++ by Uwe Dannowski)
++
++
++Version 0.46 to 0.47 (6-OCT-1998)
++====================
++
++Bug fixes
++---------
++
++ - qgen didn't build for all UNI versions (fixed by Richard Gooch)
++
++New features
++------------
++
++ - ilmid: new option -u to set UNI version (3.0, 3.1, or 4.0). Only available
++ if compiled with -DDYNAMIC_UNI.
++
++Other changes
++-------------
++
++ - ilmid: getIpAddr: improved robustness and added debugging output
++
++
++Version 0.45 to 0.46 (5-OCT-1998)
++====================
++
++Bug fixes
++---------
++
++ - ENI and ZATM driver used to read IRQ directly from PCI configuration,
++ bypassing any fixups (reported by Richard Gooch)
++ - atmsigd.new: removed "Known bug" memory leak (when tracing)
++ - led/lec_ctrl.c: signalling bug fixed, max_sdu now has correct value instead
++ of 1 (by Heikki Vatiainen, reported by Josh Baratz <jbaratz@lucentctc.com>
++ and Wolfgang Platzer <wplatzer@iaik.tu-graz.ac.at>)
++ - lots of MPOA bug fixes and other changes, see atm/mpoa/CHANGELOG (by Heikki
++ Vatiainen)
++ - atmsigd reported "Q.2931.1" when configured to support Q.2963.1
++
++New features
++------------
++
++ - atmsigd.new now supports run-time configuration of the signaling protocol
++ version (via atmsigd.conf)
++
++Other changes
++-------------
++
++ - added 16W bursts to ENI burst size configuration (NB: 16W may actually be
++ *slower* than 8W)
++ - lec_ctrl.c: zeppelin now uses LE_REGISTER protocol when TLVs are associated
++ with client's MAC address (by Heikki Vatiainen)
++
++
++Version 0.44 to 0.45 (1-OCT-1998)
++====================
++
++Bug fixes
++---------
++
++ - ENI driver didn't do four-word bursts on RX for sizes < 8 words
++ - arequipad, atmarpd, bus, lecs, les, mpcd, sw_*, and zeppelin silently
++ ignored extra command-line arguments instead of complaining
++
++New features
++------------
++
++ - ENI: added configuration options to fine-tune burst sizes (in reponse to
++ incompatibility found by Dave Airlie)
++
++Other changes
++-------------
++
++ - changed the way how ATM-specific data is stored in skbs. Tentatively updated
++ the the stack, including drivers. Use CONFIG_ATM_SKB to enable the new-style
++ skbs.
++ - Rules.make no longer discards the previous value of LDLIBS
++ - sw_tcp now only establishes bi-directional VCs if both directions are really
++ requested in the QoS structure
++ - moved manual switch control from sw_tcp to the generic switch code; "tcpswc"
++ is now called "swc", the corresponding switch.conf clause is now
++ 'control <path>' instead of 'option control "<path>"'
++
++
++Version 0.43 to 0.44 (24-SEP-1998)
++====================
++
++Bug fixes
++---------
++
++ - CONNECT messages no longer contain the AAL type IE if EP ref is present and
++ non-zero (reported by Heikki Vatiainen)
++ - SSCOP: added mode for partial compatibility with Q.SAAL1 (to get rid of
++ warnings reported by Heikki Vatiainen and of interoperability problems with
++ Virata switches reported by Damian Gilmurray)
++ - ilmid now returns a valid response for atmfMyIpNmAddress (by Uwe Dannowski)
++ - configuration on-line help for CLIP didn't work because tag was different
++ from configuration variable
++ - atmsigd crashed when adding multiple local addresses on an interface
++ (reported by Heiko Krupp)
++ - atmaddr.8 said "ATMARP" in the header (reported by Hans Einsiedler)
++ - net/atm/misc.c didn't include linux/config.h and linux/module.h, causing
++ symbols to be missing when rebuilding the kernel after enabling modules
++ (reported by Thomas Parvais)
++
++New features
++------------
++
++ - new maintenance utility tcpswc to control sw_tcp "switches" (description at
++ the end of switch/tcp/README)
++ - added support for setting the CLP bit (untested; see doc/README.CLP)
++ - added support for policing to the ATM qdisc (untested; see extra/tc/README)
++ - ilmid: added support for atmfAtmLayerUniVersion (by Uwe Dannowski)
++
++Other changes
++-------------
++
++ - updated the NICStAR driver to version 008b (by Rui Prior)
++ - new switch fabric function fab_option to pass configuration options
++ - atm2text now also supports unspecified and wildcard components in PVC
++ addresses
++ - added configuration option CONFIG_ATM_CLIP_NO_ICMP to discard packets for
++ which no ATMARP entry exists silently instead of sending an ICMP (this is an
++ ugly hack-around for the revalidation problem reported by Gerald Hanusch)
++ - various minor documentation updates
++ - atmarpd now sends InARP requests when active VC setup completes in order to
++ tell the peer our IP address(es)
++
++
++Version 0.42 to 0.43 (21-AUG-1998)
++====================
++
++Bug fixes
++---------
++
++ - trying to use atmtcp when compiled as a module with the module not loaded
++ crashed the kernel
++
++New features
++------------
++
++ - upgraded to the 2.1.117 kernel
++ - included NICStAR driver by Rui Prior at INESC (this driver also includes
++ parts of an earlier driver written by Matt Welsh, then enhanced by R. D.
++ Rechenmacher and Jawaid Bazyar)
++ - new atmsigd with support for multiple signaling entities (experimental)
++
++Other changes
++-------------
++
++ - removed register dumping code from suni.c (leaked out into the distribution)
++
++
++Version 0.41 to 0.42 (19-AUG-1998)
++====================
++
++Bug fixes
++---------
++
++ - atm.patch was out of sync again :-(
++
++
++Version 0.40 to 0.41 (19-AUG-1998)
++====================
++
++Bug fixes
++---------
++
++ - 0.40 contained an older atm.patch than the one that was supposed to go with
++ it (some changes to sch_atm and MPOA were missing)
++ - kernel didn't build with LANE enabled and MPOA disabled (fix by Mitchell
++ Blank Jr)
++
++New features
++------------
++
++ - MPOA now also supports CBR SVCs (by Heikki Vatiainen and Sampo Saaristo)
++
++Other changes
++-------------
++
++ - atmtcp may work as a module (untested)
++ - kernel code now uses capabilities instead of suser()
++ - removed obsolete recycle_buffer code
++ - distribution now also includes mkpatch, the script that's used to create
++ atm.patch
++
++
++Version 0.39 to 0.40 (13-AUG-1998)
++====================
++
++Bug fixes
++---------
++
++ - ilmid defined the value of "invalid" as 0 instead of 2 (fix by Timo
++ Parnanen)
++ - bash-2 doesn't like for n in $(SUBDIR); ... if SUBDIR is undefined (fix
++ by Heikki Vatiainen)
++ - LANE still cleared ATM_VF_RELEASED instead of calling atm_async_release_vcc,
++ which apparently led to stray kernel crashes in signaling (found with a lot
++ of help from John McPherson)
++ - ATM qdisc now properly re-allocates skb memory to grow headers, if necessary
++ - atm/switch/Makefile didn't build SUBDIRS
++ - atmarpd sent garbage ATM addresses in InARP responses over PVCs (reported by
++ Stefan Keller-Tuberg)
++
++New features
++------------
++
++ - MPOA (Multi-Protocol Over ATM) client support written by Heikki Vatiainen
++ and Sampo Saaristo
++ - LANE client (zeppelin) now also supports LANE2 (by Heikki Vatiainen)
++
++Other changes
++-------------
++
++ - accept() now also returns on ATM_VF_CLOSE
++ - ATM qdisc now uses the same data format on rtnetlink as other qdiscs; new
++ option for user-provided headers
++ - atm/switch can now use "external" routing (e.g. provided by the fab control)
++
++
++Version 0.38 to 0.39 (4-AUG-1998)
++====================
++
++Bug fixes
++---------
++
++ - added missing #include <atm.h> in tcpsw.c (fixed by Heikki Vatiainen)
++ - atmsigd allowed both sides to initiate PCR modification; Q.2963.1 only
++ allows the connection owner (i.e. the caller) to do this
++ - atmarpd no longer tries to use incoming SVCs with zero backward bandwidth
++ for ATMARP
++ - ENI and ZATM drivers didn't invoke vcc->pop on dev->ops->send failure
++ - make install didn't probe correctly for presence of /usr/include/stdint.h
++ (needed on GLIBC 1 systems)
++ - net/atm/resources.c didn't export bind_vcc to modules (fix by Oliver
++ Frommel)
++ - net/arpd/atmarp didn't build without make depend (reported by Stefano
++ Giacometti)
++ - clip_mkip zeroed vcc->rx_inuse and didn't take into account that clip_push
++ calls atm_return, which subtracts from vcc->rx_inuse too
++ - fixed typos in qgen/uni.h (and msg.fmt) for causes 38, 41, and 43
++ - atmsigd wrote exit trace to stderr when it had a dump directory and vice
++ versa
++ - documentation still claimed that atmtcp yields messages at boot time
++
++New features
++------------
++
++ - added flow to ATM VCC mapping queuing discipline (experimental)
++ - module for setting up ATM PVC/SVC mappings with "tc" in extra/tc (see
++ extra/tc/README)
++ - atmarpd: new request type art_query to request resolution without VC setup
++ - atmarp: new undocumented option -Q to test art_query
++ - added ATMTCP interfaces that survive disconnects (persistent; new atmtcp(8)
++ options -p and -r; new ioctls ATMTCP_CREATE and ATMTCP_REMOVE)
++
++Other changes
++-------------
++
++ - zeppelin didn't explicitly set the AAL type for outbound connections (by
++ Heikki Vatiainen)
++ - CLIP also allows SVCs to have no idle timeout at all (timeout = 0)
++ - moved SUNI private ioctls (SUNI_GETLOOP and SUNI_SETLOOP) from
++ drivers/atm/suni.h to include/linux/atm_suni.h
++ - atmarpd now shows QoS information for VCs where it differs from the default
++ or where no default is applicable
++ - removed the file atm/WARNING, which gave an overly pessimistic perspective
++ of the state of things
++ - switch: fab_op now returns the cause value plus (optionally) a pointer to
++ diagnostics in the callback instead of a simple okay/not okay indication
++ - updated and corrected the atmtcp man page
++ - further cleanup of the build procedure
++ - README now mainly refers to http://lrcwww.epfl.ch/linux-atm/info.html
++ - updated and trimmed BUGS
++ - added a note to CREDITS indicating its obsolescence
++
++
++Version 0.37 to 0.38 (25-JUN-1998)
++====================
++
++Bug fixes
++---------
++
++ - fixed the remaining few #include <linux/atm.h>
++ - invoking fcntl() or socketpair() on an ATM socket caused an "Oops" (reported
++ by Jonathan Chan)
++ - CLIP PVCs caused an "Oops" when cat'ing /proc/atm/pvc (reported by Marko
++ Kiiskila and Robert Olsson)
++ - atm/qgen/default.nl wasn't removed after build failure
++ - debugging switch (sw_debug) did not stop operations after the first error
++ - svc_accept returned apparent success instead of -EAGAIN, usually leading to
++ a later -ENOTCONN
++ - ttcp.c didn't initialize port_name, leading to erratic behaviour when making
++ slight changes to the build process
++ - atm_pdu2truesize diverged from alloc_skb, leading to sudden failure of VCs
++ or of ATMARP (reported by Robert Olsson)
++ - corrected use of '~' when applied to unsigned longs representing memory
++ addresses in aread, ENI, and ZATM (reported by Wai-Sun Chia)
++ - atmtcp and LANE didn't use bind_vcc when setting up control VCs
++ - atmtcp got ENOMEM/EBUSY wrong when failing to create an interface
++ - sig level <level> in atmsigd.conf didn't affect UNI diagnostics
++
++New features
++------------
++
++ - upgraded to the 2.1.105 kernel
++ - added ATMTCP "switch" in atm/switch/tcp
++ - atmtcp: new mode -s to connect to an ATMTCP "switch"
++ - atmtcp: new option -d for debugging output
++ - added -b option (the usual "background") to switch/relay.c
++
++Other changes
++-------------
++
++ - changed "PDU" to "SDU" in the atmtcp(8) man page
++ - atmarpd now includes the interface netmask in ATMARP table dumps
++ - added ATM devices also to the Alpha architecture, because at least ATMTCP
++ works (by Wai-Sun Chia)
++ - added the removal of -Wmissing-prototypes to the 0.37 changes
++ - removed -Wcast-align from Rules.make because of a conflict with
++ /usr/include/socketbits.h of glibc 2 on Alphas (reported by Wai-Sun Chia)
++ - atmsigd.conf.4: documented that debug log stderr works too
++ - sap_equal now also allows wildcard matches for BHLI (with SXE_COMPATIBLE)
++ - atmsigd now uses -m <mode> instead of -N and -A
++ - atmsigd.conf now uses sig mode <mode> instead of sig net
++
++
++Version 0.36 to 0.37 (6-JUN-1998)
++====================
++
++Bug fixes
++---------
++
++ - lib/atm.h defined AF_ATMPVC to 20, but the correct value is 8. Likewise,
++ AF_ATMSVC should be 20, not 21. (Reported by Luke Diamand)
++ - fixed bad ASN encoding in ilmid (by Vesa-Matti Puro)
++ - make install and make instdirs didn't stop on error
++
++New features
++------------
++
++ - upgraded to the 2.1.104 kernel
++ - included a script to demonstrate the debug switch (see switch/debug/README)
++
++Other changes
++-------------
++
++ - moved definitions not used by the kernel from linux/atmarp.h to atmarp.h
++ - removed linux/atm_stdint.h (linux/types.h has now caught up)
++ - changed ENI and ZATM driver to use new PCI interface
++ - net/atm/clip.c no longer uses ether_setup (suggested by Alexey Kuznetsov)
++ - more header file cleanup (main change: applications should now
++ #include <atm.h> instead of #include <linux/atm.h>)
++ - removed -Wmissing-prototypes from Rules.make because of a conflict with
++ include/linux/byteorder/swab.h
++
++
++Version 0.35 to 0.36 (23-APR-1998)
++====================
++
++Bug fixes
++---------
++
++ - changed the numeric values of PF/AF_ATMPVC/SVC and SOL_ATM/AAL to avoid
++ conflicts with other allocations. This breaks binary compatibility with
++ ATM programs compiled under older kernels
++ - RESTART ACK was sent with the wrong class when acknowledging the restart of
++ the indicated virtual channel (fix by Mohsen Souissi)
++ - RELEASE was retransmitted forever (to avoid having to perform a RESTART),
++ although it's sufficient to retransmit once and then drop the connection
++ - esi.c checked the kernel version code without including linux/version.h
++ - CLIP changes magically fixed hangs on SICGIFCONF (reported by Wayne Salamon)
++ - atmsigd usually didn't set pvc.sap_family in ISP messages
++
++New features
++------------
++
++ - added build-time option -DTHOMFLEX to send RESTART when SAAL comes up, which
++ works around a bug in some Thomson Thomflex 5000 switches (by Mohsen
++ Souissi)
++ - atmtcp: new option "-i itf" to request a specific interface number
++ - the "debug switch" (switch/debug/sw_debug) is now capable of successfully
++ signaling a UNI 3.x call (see switch/debug/README for details)
++
++Other changes
++-------------
++
++ - atm_equal can now also compare PVC addresses. The argument type has
++ therefore been changed from struct sockaddr_atmsvc * to struct sockaddr *
++ - moved driver-private data from skb->atm.* into skb->cb
++ - complete redesign of communication between atmarp(8) and atmarpd(8) (now
++ uses a UNIX domain socket; suggested by Alexey Kuznetsov)
++ - atmarp -a now also produces correct output if atmarpd is running with -d
++ - removed clip(8)
++ - moved atmarp(8) from atm/ip into atm/arpd, removed atm/ip
++ - /proc/atm/svc shows listening sockets again
++ - cleaned up a few cases where diag(...,DIAG_FATAL,...) was followed by an
++ "else" or a "return".
++ - atmsigd now uses Unix domain sockets (instead of named pipes) to communicate
++ with non-kernel ISP users (updated test/isp too)
++ - net/atm/resources.c:atm_dev_register can now be asked to assign a specific
++ interface number (-1 yields the old behaviour)
++
++
++Version 0.34 to 0.35 (27-MAR-1998)
++====================
++
++Bug fixes
++---------
++
++ - ilmid compared memcmp results with -1,1, which fails under optimization
++ (fixed by Damian Gilmurray)
++ - various fixes and cleanup in how CLIP interacts with the neighbour cache
++ (spotted by Alexey Kuznetsov)
++ - Rules.make complained about missing "optprocess" command on some occasions
++
++New features
++------------
++
++ - upgraded to the 2.1.90 kernel
++ - added some components for ATM switch control (not properly integrated yet,
++ so they don't do anything useful at the moment; written by Roman Pletka)
++
++Other changes
++-------------
++
++ - eliminated various compiler warnings when compiling with glibc2
++ - removed clip_hard_header (suggested by Alexey Kuznetsov)
++
++
++Version 0.33 to 0.34 (13-MAR-1998)
++====================
++
++Bug fixes
++---------
++
++ - eni.c didn't include config.h (fix by Pete Wyckoff)
++ - (yet another) VCC list handling bug (fixed by Heikki Vatiainen)
++ - kernel also applied idle timeout to CLIP PVCs
++ - make clean didn't remove test/errnos.inc
++ - atmsigd errored as_connect and as_accept with as_close instead of as_error
++ - eni: bandwidth was sometimes reserved for UBR VCs
++ - eni: checking of bandwidth changes was broken
++ - eni: error handling after failed bw change checks destroyed the free list
++ - test/errnos.inc sometimes wasn't generated because of mtime granularity (fix
++ by Brian Armstrong and Corinne Rosier)
++ - fixed use of return code of get/put_user and copy_from/to_user
++ - kernel: fixed a few minor race conditions
++ - ATM_GETADDR left address list locked on fault
++ - maximum length of high layer information was 7 bytes instead of 8 for ISO
++ and User Specific high layer information (reported by Damian Gilmurray)
++ - some tools didn't include errno.h although they use errno or Exxx
++ - atmsigd usually accessed deallocated memory when writing traces, which
++ sometimes led to crashes (reported by Heikki Vatiainen)
++ - indentation of the first two lines of UNI signaling messages in traces was
++ missing
++ - LANE: duplicate data direct connections to entities where we already
++ have a connection are now forbidden. LES and BUS can now co-reside.
++ (Reported by Jean-Francois Moine, fixed by Heikki Vatiainen)
++ - LANE: plugged a file descriptor leak (by Heikki Vatiainen)
++ - atmsigd.conf.4 incorrectly stated that diagnostics must have a higher
++ priority than the specified level to get printed (they're also printed if
++ their priority is equal to that level)
++ - zatm driver didn't virt_to_bus the back pointer of TX rings, leading to
++ crash after sending the 32nd PDU of a VCC (reported by Ajay Bakre)
++ - zatm_feedback sometimes returned with interrupts disabled
++ - ENI driver didn't treat requests for UBR at link speed as "unlimited" and
++ allocated one shaper for each such VCC
++ - atm_async_release_vcc now has its own flag ATM_VF_CLOSE. Overloading
++ ATM_VF_RELEASED caused hung SVCs under some conditions.
++ - atmsigd sometimes released listening sockets before kernel completed its
++ cleanup, yielding warnings and zombies
++ - atmsigd accessed already deallocated data structures when handling
++ unparseable signaling messages
++
++
++New features
++------------
++
++ - upgraded to the 2.1.79 kernel
++ - CLIP now handles NETDEV_CHANGE (proposed by Pete Wyckoff; untested)
++ - various minor signaling changes for operation as switch control
++ - new device operation proc_read: device drivers can now register in /proc
++ (e.g. /proc/atm/eni:0)
++ - added some more BHLI definitions to include/atmsap.h, including draft
++ mapping of well-known TCP/UDP port numbers
++ - added support for TIOCOUTQ/TIOCINQ on native ATM
++ - new library function sap_equal
++ - added convenience function atmpvc_addr_in_use to linux/atm.h
++ - major overhaul of "isp", which is now a good tool for signaling regression
++ tests. See atm/test/README.isp
++ - LANE can now be compiled as a kernel module (by Heikki Vatiainen)
++ - new tool debug/svctor.c to torture signaling by setting up and releasing
++ lots of SVCs (see the source for details)
++
++Other changes
++-------------
++
++ - cleaned up the copying terms: libraries are now covered by LGPL instead of
++ GPL and qgen doesn't "taint" the code it generates
++ - atmarpd: IP addresses are now __u32 instead of unsigned long
++ - atmarpd: changed printf("... %08x ...",(unsigned long) ptr) to %p ...",ptr
++ - /proc support now allocates inode numbers dynamically
++ - added comment to clarify motivation for useless buffer alignment in aread.c
++ (reported by Jeon Jong Hwan)
++ - suni.c and uPD98402.c: SONET_GETSTATZ no longer clears the statistics if the
++ copy faults
++ - ilmid should now work on any interface (patch by Heikki Vatiainen)
++ - changed all __uNN of tools to uintNN_t for glibc2-compatibility
++ - added stdint.h to lib for compatibility with future versions of glibc2
++ - various other evil hacks in tools to make things compile with glibc2
++ - the NIC debugging programs ed, encopy, endump, zndump, and znth are no
++ longer built and installed by default
++ - for compatibility with POSIX 1003.1g, accept now returns ECONNABORTED
++ instead of ECONNREFUSED if connection is already gone (proposed by Heikki
++ Vatiainen)
++ - listening sockets now return instantly if the signaling demon dies
++ - various minor LANE updates to track API changes (by Heikki Vatiainen)
++ - SUNI now also warns if signal is missing at initialization time
++ - zatm: added work-around for unfair buffer space accounting
++ - clarified some of atmarpd's diagnostics
++ - documentation updates
++
++
++Version 0.32 to 0.33 (19-NOV-1997)
++====================
++
++Bug fixes
++---------
++
++ - SSCOP did poll sequence number comparisons in the (data) sequence number
++ space, typically leading to periodic SSCOP restarts (reported by Heikki
++ Vatiainen)
++ - atmsigd now releases calls on receipt of STATUS with call state 0 (reported
++ by Heikki Vatiainen)
++ - qgen tried to print the names of unnamed groups (fix by Simon Leinen)
++ - make clean in qgen left all the .c and .h files produced by qgen
++ - minor fixes to signaling message format description (qgen/msg.fmt,
++ previously qgen/uni*)
++ - /usr/include/atm.h was calling itself "atmlib" (found by Leena Chandran)
++ - atmsigd: the address format of the calling party number was used to
++ determine the format of the called party number in a SETUP message
++ - added some semicolons to Rules.make for bash 2.0 compatibility (by Tan Chang
++ Hu and Rolf Kunisch)
++ - select/poll indicated an exception when a non-blocking connect terminated.
++ Now it indicates writability, and an error only if the connect failed.
++ - LES/BUS can now co-exist at the same address (by Heikki Vatiainen)
++ - fixed race condition between asynchronous release (e.g. on ATMARP idle timer
++ expiration) and signaling demon response
++ - fixed a typo "[itf]." instead of "[itf.]" in atmsigd.conf.8
++ - "ATM drivers" kernel configuration section is no longer a top-level menu
++ item but it's now under "Network devices"
++ - sigd_close forgot to purge VCs not connected to devices (e.g. closing ones),
++ so they hung
++ - the list of unconnected VCs was sometimes garbled
++ - atmsigd printed null string for as_itf_notify message name when debugging
++ - Arequipa: check_aq_vcc also accepted VCs that were already released by
++ signaling
++ - ATM_VF_PARTIAL and ATM_VF_BOUND had the same value
++ - atmaddr still used old calling convention of ATM_GETNAMES
++ - the atmarpd man page referred to atmarpd as "atmsigd"
++ - various atmtcp bug fixes
++ - atm_recvmsg sometimes returned with interrupts disabled (reported by Pete
++ Wyckoff)
++ - fixed ttcp_atm dependencies (.depend contains dependencies for "ttcp.o")
++ - UNI message format: "more" was missing for def_pck_size
++ - eni/suni didn't compile as modules (fixed by Pete Wyckoff and Ladislav
++ Lhotka)
++ - further net/atm/Makefile cleanup
++ - arequipa_close always left the socket with arequipa_expect enabled. Now it
++ returns it to the previous state.
++ - ENI driver was leaking buffer memory on failure of set_tx
++ - atmarpd didn't print symbolic names of "new" flags (ATF_ARPSRV, etc.)
++ - ATM ARP server didn't make client entries public (reported by Tom Mahieu)
++ - drivers/atm/Config.in had extra "endmenu" (fixed by Ladislav Lhotka)
++ - atmarpd got confused when receiving InARP reply without source ATM address
++ - atmsigd sometimes didn't stop timers if Q.2963.1 wasn't enabled
++ - when rejecting a call, the kernel freed the VCC twice
++
++New features
++------------
++
++ - merged source tree (except Arequipa, single-copy, and various NIC drivers)
++ with 2.1.65-Linus tree
++ - qgen can now handle repeated information elements
++ - added ATM_SETESI[F] ioctl and esi utility (boards without a real ESI in ROM
++ should now set the default ESI to 0x000000000000)
++ - new socket option SO_ATMSAP along with struct atm_sap (using a fixed-size
++ BLLI array instead of the linked list in struct sockaddr_atmsvc)
++ - added Q.2963.1 PCR modification in signaling and the ENI driver
++ - aread: new option -c to print received data as characters (similar to od -c)
++ - new tool test/align to test handling of mis-alignment in NIC drivers
++ - atmsigd now supports policy restrictions for incoming/outgoing calls (see
++ atmsigd.conf.4, "policy")
++ - atmsigd can now also use a pair of named pipes (or, actually, any named
++ object in the file system) for communicating with the user of signaling
++ (normally the kernel)
++ - new tool called "isp" (for "Internal Signaling Protocol") to talk ISP with
++ atmsigd over named pipes
++ - new functions sap2text and text2sap to converts SAPs to/from textual
++ representation, and a sap(7) man page
++ - new traffic parameter field "pcr" to indicate the desired PCR. min_pcr and
++ max_pcr can the be used to indicate the acceptable range.
++ - new function atm_pcr_goal to help drivers to interpret traffic parameters
++
++Other changes
++-------------
++
++ - removed some more obsolete CLIP-related ioctls
++ - qgen: simplified generation of engines with a prefix other than "q" or "qd"
++ - ENI and ZATM drivers now use shareable interrupts
++ - cleaned up some 32bit-isms in ENI driver
++ - cleaned up several 32bit-isms in SSCOP (reported by Tan Chang Hu)
++ - SSCOP: work-arounds for buggy ntohl prototype in some early versions of
++ glibc (reported by Tan Chang Hu, further explored by David S. Miller and
++ Richard Henderson)
++ - started updating the ZATM driver for 2.1 (still crashes under load)
++ - added missing 2.1 pieces in ENI's SUNI driver
++ - added __initfunc and __initdata where appropriate
++ - tools tree now compiles under 0.31 (2.0.25 kernel) and 0.33 (2.1.55 kernel)
++ - gratuitous improvement of identifier tree allocation in qgen
++ - the interface number is now optional for sonetdiag (like for atmdiag)
++ - started implementing the kernel side of point-to-multipoint signaling
++ support
++ - /proc/atm/arp now displays "resolving" or "expired" (with the number of
++ times the entry is referenced) instead of "incomplete".
++ - moved ATM_MAX_BLLI from linux/atm.h to linux/atmsap.h
++ - changed ttcp_atm to use SO_ATMSAP (if available) to set BHLI
++ Note: ttcp_atm previously didn't use a BHLI, so old and new versions of
++ ttcp_atm don't interoperate.
++ - updated all other programs using SAPs too, except for LANE
++ - ENI: failure to allocate a traffic shaper now yields EBUSY instead of EAGAIN
++ - instead of just complaining, the ENI driver now handles all kinds of
++ mis-alignment in the TX path properly
++ - re-implemented send and receive side of Arequipa
++ - merged qgen/uni3x and qgen/uni40 into msg.fmt
++ - added missing Q.2931/UNI 4.0 items to qgen/q2931.h and msg.fmt
++ - also added BLLI L3 H.310 codepoint with related encodings
++ - various file name and identifier changes to give a more appropriate name
++ (e.g. "uni" or "call") to something that's never been Q.2931
++ - added library dependencies
++ - atmsigd produces more readable and usually more comprehensive debugging
++ output
++ - atmsigd.conf.4 now mentions that -d is the debugging output addict's choice
++ - all programs accepting -l syslog now also accept -l stderr. (This is useful
++ for atmsigd if atmsigd.conf sets logging to something else.)
++ - atmsigd now issues ATM_GETADDR ioctls on the signaling socket, not on the
++ kernel socket
++ - WARNING: text2qos: "pcr" is no longer a synonym for "max_pcr" !
++ - text2qos now refuses min_pcr=max
++ - device driver interface: removed vcc->peek; device drivers now choose their
++ own allocation strategy (change motivated by bug report from Furquan Ansari)
++ - drive driver interface: new helper functions atm_charge/atm_return to handle
++ buffer space allocation
++ - device driver interface: vcc->push no longer allocates buffer space. This is
++ now done by the driver, via atm_charge
++ - updated eni, zatm, and atmtcp to use the new mechanism
++ - zero padding in eni driver failed due to mis-alignment on some systems
++ (fixed by Pete Wyckoff)
++ - various compiler warnings removed (by Pete Wyckoff)
++ - removed support for pre-AREQUIPA_WORK mechanism
++ - arequipa close mechanism cleanup
++ - further cleaned up QOS parameter checking
++ - new ISP message as_identify for parallel call processing (not supported yet)
++ - zatm: renamed struct zatm_thist to struct zatm_t_hist after wondering
++ myself what on earth "this t" could be ...
++ - doc/Makefile now invokes dvips with -o
++
++
++Version 0.31 to 0.32 (10-JUL-1997)
++====================
++
++Bug fixes
++---------
++
++ - manipulation of local ATM addresses didn't check for permission
++
++New features
++------------
++
++ - ilmid now supports the system group and a couple of ILMI MIB objects (by
++ Scott Shumate)
++ - device and VCC allocation is now dynamic
++ - E.164 addressing support and corrections to address coding in uni3x/uni40
++ (by S. A. Wright, T. C. Jepsen, and Z. Zhang)
++ - support for device de-allocation via per-device operation dev_close
++
++Other changes
++-------------
++
++ - upgrade to kernel version 2.1.37
++ - ENI driver cleanup (uses readl/writel, skb_put, etc.)
++ - socket option handling has changed: optval is now void * (to improve
++ compile-time type checking) and optlen is int (not int *) in getsockopt
++ - socket option "names" now encode the level and the size (based on an idea of
++ Elwyn Davies)
++ - cleaned up some of the #includes in net/atm/proc.c
++ - total rewrite of ATMTCP (now the data forwarding is done in user space,
++ which makes things slower but a lot more flexible)
++ - separated PDU parsing and printing from SSCOP state machine
++ - new per-device operation dev_close to shut down devices
++ - changed a few DIAG_WARNs to DIAG_INFO in ilmid
++
++Removed features
++----------------
++
++ - polled ATM devices are no longer supported
++ - CLIP is gone (use ATMARP instead)
++ - Arequipa and LANE don't work yet (will come back later)
++
++
++Version 0.30 to 0.31 (22-APR-1997)
++====================
++
++Bug fixes
++---------
++
++ - atmarpd even refused IP address changes by the ATMARP server, which
++ typically led to the creation of one extra SVC
++ - ATMARP timeouts were computed at the wrong place (found by Gerald Hanusch)
++ - aqtest's usage didn't mention the -v option
++ - some tools used 0x%p instead of %p (which is fine in the kernel, by the way)
++ - skb_migrate didn't update skb->list
++ - zeppelin: incurred spurious core dumps on unsuccessful attempts to connect
++ to LANE servers, ESI parsing from command line seg faulted, obtaining ESI
++ from NIC left an ATM socket hanging, man page didn't describe all options
++ (by Marko Kiiskila and Heikki Vatiainen)
++
++Other changes
++-------------
++
++ - arequipa_close now only returns after the Arequipa connection has been
++ successfully closed. This allows applications to reliably close and
++ re-create Arequipa SVCs, e.g. to change the traffic parameters.
++ - the arequipad operations 3rd party close and synchronization are now handled
++ inside the kernel and survive arequipad restarts
++
++
++Version 0.29 to 0.30 (10-APR-1997)
++====================
++
++Bug fixes
++---------
++
++ - atmtcp didn't use vcc->push and therefore got the buffer usage accounting
++ wrong (fix by Gerald Hanusch)
++ - when closing a VC, the ENI driver didn't wait until all TX data has really
++ left the board, which created a close/open race (found by Richard Jones)
++ - SSCOP sometimes omitted the last element in a STAT PDU (fix - even with
++ optimization vs. Q.2110 - by Ngo Bach Long)
++ - atmarpd allowed ARP information to change permanent entries (found by Gerald
++ Hanusch)
++ - atmsigd's get_pvc used the maximum SDU size, thereby wasting buffer space
++ very quickly, which led to signaling problems (reported by Richard Jones and
++ Rik Wade)
++ - oops, the BUGS file was always one version number ahead
++ - ATMARP had a race between packets sent by the remote station and the
++ ATMARP_MKIP ioctl. This caused the dreaded "unknown hw protocol 0xaaaa"
++ error. (Finally fixed thanks to a dump provided by Patrick Flynn)
++ - Arequipa had the same race for AREQUIPA_INCOMING. This probably caused the
++ occasional "loss" (they were actually kept in vcc->recvq until the
++ connection was closed) of the first packet(s).
++
++
++Version 0.28 to 0.29 (4-APR-1997)
++====================
++
++Bug fixes
++---------
++
++ - saal/sscop.c: NORMALIZE macro was weird and broken (fix by Ngo Bach Long)
++ - InARP queries didn't contain the target ATM address, even if it is known,
++ which stretches the allowances RFC1577 makes for violating RFC1293 (found
++ by Juha Heinanen)
++ - tcp_conn_request: Arequipa modification to MTU size calculation used wrong
++ socket (fix by Gerald Hanusch)
++ - kernel ATMARP table handling had some obscure races
++ - temporary work-around: added A2T_LOCAL when using A2T_NAME in atmsigd and
++ atmarpd. Before, systems using ANS where the name server is reached via (IP
++ over) ATM exhibited truly bizarre failure patterns when refreshing ATMARP
++ entries. (With a lot of help from Juha Heinanen)
++ - ditto for arequipad, although the effects were less dramatic
++ - atmarpd: if not using -m, incoming connections for which a valid entry
++ already existed (e.g. due to manual configuration) were not entered in the
++ kernel ATMARP table until after the entry timed out for the first time (by
++ Gerald Hanusch)
++ - skb data areas are now aligned using skb_reserve instead of directly
++ tampering with skb->data (and forgetting skb->tail in the process ...)
++ (found by Uwe Dannowski)
++
++New features
++------------
++
++ - atmarpd is now automatically notified of IP over ATM interfaces already
++ existing at startup. This greatly simplifies the atmarpd restart ritual.
++ (All ATMARP table entries and the default QoS are still lost, though.)
++
++Other changes
++-------------
++
++ - cleaned up some weird and partially dead code in arpd/arp.c (found by
++ Gerald Hanusch)
++ - removed superfluous continue in arp.c:atmarp_setentry
++ - device-driver specific declarations now reside in
++ /usr/include/linux/atm_<drv_name>.h, so that disgusting hacks like
++ #include "/usr/src/linux/..." can be avoided (based on proposal by Uwe
++ Dannowski)
++ - updated the list of supported NICs in README and the on-line help
++ - arpd/atmarpd.8: documented that atmarpd -m may violate RFC1577 in subtle
++ ways (pointed out by Gerald Hanusch)
++ - updated MPR usage description to version 1.5 and removed mpr.patch
++ - removed MEM_DEBUG from the build process (MPR 1.5 initializes itself
++ automatically)
++
++
++Version 0.27 to 0.28 (27-MAR-1997)
++====================
++
++Bug fixes
++---------
++
++ - atmarpd restarted timers on as_valid -> as_valid transitions, illegally
++ delayed necessary refreshes (reported by Juha Heinanen)
++ - SSCOP cleared POLL timer on IDLE timer expiry (fix by Ngo Bach Long)
++ - atmsigd didn't initialize "now" soon enough, causing an unnecessary
++ retransmission of the first BGN PDU (by Ngo Bach Long)
++ - atmsigd responded to RELEASE COMPLETE in ss_rel_ind with a STATUS instead of
++ entering ss_wait_close (by Steve Pope)
++
++New features
++------------
++
++ - new tool aqpvc to declare incoming Arequipa traffic on a PVC to the system
++ (caveat: removing such a PVC can turn out to be surprisingly difficult)
++
++Other changes
++-------------
++
++ - removed some useless code in atmarpd's handling of VC disconnects
++ - removed unused signaling state ss_hold (equivalent to ss_wait_rel)
++
++
++Version 0.26 to 0.27 (11-MAR-1997)
++====================
++
++Bug fixes
++---------
++
++ - oops, forgot to include atm/lib/rtf2e164_cc.pl in the distribution
++ - atmsigd's VCI allocation in -N mode was too simplistic and failed after some
++ signaling activity (reported by Richard Jones)
++ - atm_connect was rejecting ATM_{VPI,VCI}_ANY
++ - aq_prev in the list of Arequipa connections wasn't set properly, leading to
++ random crashes when using Arequipa (found and fixed by Richard Jones, after
++ weeks of tearing his hair out)
++ - arequipa_close didn't remove the Arequipa route, which kept the upper layer
++ protocol connection alive for a rather long time (reported by Richard Jones)
++
++New features
++------------
++
++ - ilmid enhancements: vastly improved retry mechanism, workaround for a bug in
++ the ATML Virata switch, -v option for very detailed debug output (Scott
++ Shumate)
++ - atmsigd now also accepts the signaling VC as a command line argument
++ - qos2text appended colon to traffic type even if nothing else followed
++ - new program debug/aqtest to test Arequipa (based on work by Mehdi Tazi)
++
++Other changes
++-------------
++
++ - added a few missing NULLs to struct atmdev_ops initialization in various
++ drivers (this change does not alter any semantics)
++ - changed printk ...%lx... (unsigned long) ptr to ...%p... ptr at many
++ places
++ - removed atm/lib/rtf2cc.pl and atm/lib/cc.inc (they were only used by an
++ interim version of cc_len)
++ - atmarp's usage no longer contains lines longer than 80 characters
++ - added get_logfile() and get_verbosity() to libatm (for ilmid, by Scott
++ Shumate)
++ - select() consumed CPU time unnecessarily if testing for one direction while
++ there's a lot of activity in the other direction (e.g. atmarpd wasted cycles
++ in select() for each outbound packet while waiting for ARP messages)
++ - the value of ATM_AAL0 has changed (from zero to 13), so all programs using
++ AAL0 need to be recompiled
++ - MAX_ATM_QOS_LEN has changed, so most programs using qos2text need to be
++ recompiled
++ - the AAL can now also be set along with the QoS parameters. This approach
++ should be used instead of specifying it in the socket() call.
++ - if no AAL is specified, the kernel now defaults to AAL5 (was AAL0)
++ - updated most demons, tools, and library functions to set the AAL along with
++ the QoS parameters
++
++
++Version 0.25 to 0.26 (29-JAN-1997)
++====================
++
++Bug fixes
++---------
++
++ - ATMARP VCCs could stay around forever even after timing out, because the
++ process was not woken up.
++ - the ATMARP "fix" in 0.25 introduced an infinite loop. Fixed that one too.
++ - bit 8 in octets 6 and 7 of BLLI ("ext") were set to 1 instead of 0 when
++ using ATM_L2_USER/ATM_L3_USER (reported by ukl2@rz.uni-karlsruhe.de)
++ - qlib added silly offset (which fortunately happened to be zero most of the
++ time) to dumps of large fields (fixed by Jean-Francois Moine)
++ - IP over ATM restricted MTU changes to valid Ethernet MTU sizes
++ - LANE: fixed two bugs that crashed zeppelin when the connection to the
++ servers failed (by Marko Kiiskila)
++
++New features
++------------
++
++ - lib/ans.c now properly computes the length of the country prefix of E.164
++ addresses for reverse lookups (needs file /etc/e164_cc, see USAGE)
++ - if the new -m option is set, atmarpd now merges incoming calls into the
++ ATMARP table if the ATM address is known (see atmarpd.8 for details)
++ - included an RPM spec file (this is still very experimental)
++ - NICStAR driver now also works with IP over ATM (by Stuart Daniel)
++ - usage.txt: added description of how to run ATM NICs back-to-back (by Richard
++ Jones)
++
++Other changes
++-------------
++
++ - signaling traces now also include SAAL up/down transitions
++ - qgen no longer (unnecessarily) depends on libatm.a
++ - started work on letting qgen handle items that appear at more than one
++ place, e.g. repeated IEs (after an idea by Jean-Francois Moine)
++ - did some cleanup and added comments to qlib.[ch]
++ - added -m option to atmarp in config/redhat-4.0/atm.init
++ - added new make target "filenames" to generate a list of all the files which
++ are installed
++ - config/redhat-4.0 now contains an example hosts.atm file and also a Makefile
++ for more convenient installation
++ - atmsigd now reads atmsigd.conf before parsing the command-line options,
++ thereby allowing values set in the file to be superseeded
++ - atmsigd now also logs the internal reference and the caller's address on
++ calls establishment
++ - ilmid: very dirty hack to give switches some time to process ILMI cold start
++ (by Joseph Evans)
++
++
++Version 0.24 to 0.25 (20-DEC-1996)
++====================
++
++Bug fixes
++---------
++
++ - net/atm/atmarp.c:idle_timer_check only expired every other entry (reported
++ by Marko Kiiskila)
++
++New features
++------------
++
++ - LANE now also supports IPX (SNAP and 802.3; by Marko Kiiskila)
++ - NICStAR driver now supports VPI != 0 and has configurable settings in
++ nicstar.h (by Stuart Daniel)
++
++Other changes
++-------------
++
++ - ENI: TX DMA scratch are is now stored per device. This should allow multiple
++ NICs to coexist.
++
++
++Version 0.23 to 0.24 (29-NOV-1996)
++====================
++
++Bug fixes
++---------
++
++ - atm/test/window.c was missing in 0.23
++ - atm/debug/delay didn't build unless atm/lib headers were already installed
++ in /usr/include
++ - atm/debug/znth had undefined return value
++ - SSCOP: fixed typo (that could probably kill the SSCOP connection in case of
++ a retransmission); fix by Olivier Bonaventure
++ - corrected unnecessarily large buffer allocation in zatm.c:pool_index (by
++ Jonathan Larmour)
++ - hosts2ans.pl generated reverse addresses for the domain "ATM.INT" instead of
++ "ATMA.INT"
++ - atmarpd "forgot" any pre-set QOS when receiving new ARP information for the
++ respective entry (reported by Gerald Hanusch)
++ - window scale didn't scale the window sent in the SYNACK packet (reported by
++ Juan-Antonio Ibanez)
++ - LANE: better connection failure handling in zeppelin (by Marko Kiiskila)
++ - LEC kernel timer wasn't restarted when restarting zeppelin (found by Gerald
++ Hanusch, fixed by Marko Kiiskila)
++ - LANE: le_flush_request was sent too early when establishing connection (by
++ Marko Kiiskila)
++ - zeppelin stopped operation (unwantedly) in random cases when LANE servers
++ were down (by Marko Kiiskila)
++ - LANE: non-blocking connections, VCC and LE ARP timeouts, and TLV fields in
++ LE_CONFIG_RESPONSE fixed (by Marko Kiiskila)
++
++New features
++------------
++
++ - atm2text now also uses ANS
++ - signaling traces now also contain error reports from qgen
++ - added new build-time configuration option "CISCO" (in atm/Rules.make) to
++ work around a bug in Cisco's point-to-multipoint signaling
++ - included example configuration files for RedHat 4.0 (see
++ atm/config/redhat-4.0/README)
++
++Other changes
++-------------
++
++ - local variable "link" in atm/debug/delay.c:loop was shadowing "link" system
++ call
++ - cleaned up various Makefiles
++ - qgen: bytes left in qet_space are now more meaningful
++ - named (ANS) now also starts even if atmsigd is not running and retries to
++ create the ATM socket in 15 minute intervals until is succeeds (by Marko
++ Kiiskila)
++ - LANE: (too) short le_flush_responses (Cisco 7010, sw ??.??) are now handled
++ (by Marko Kiiskila)
++
++
++Version 0.22 to 0.23 (16-NOV-1996)
++====================
++
++Bug fixes
++---------
++
++ - fixed stupid typos in atm/lib/atmres.h and an unnecessary dependency on
++ libresolv.a in atm/lib/Makefile (reported by Gerald Hanusch)
++ - fixed warning about implicit declaration of function bigphysarea_init in
++ init/main.c
++ - I think I fixed the SSCOP VR(MR) problems that were first reported by
++ Edouard Lamboray in '95, then by Heinz Schuerch, and that finally led to a
++ total SSCOP breakdown (in 0.22) reported by Gerald Hanusch
++
++New features
++------------
++
++ - integrated the IDT 77201 (NICStAR) driver by Matt Welsh and Stuart Daniel
++ <stuartd@eecs.umich.edu>. Note that this driver currently only supports
++ native ATM.
++ - new throughput and latency benchmark test/window (by Matt Welsh)
++
++Other changes
++-------------
++
++ - upgrade to kernel version 2.0.25
++ - changed drivers/atm/eni.c:do_tx:dma to static in order to reduce kernel
++ stack use (by 480 bytes). Note that this hack may crash systems with more
++ than one ENI adapter.
++ - qlib now also complains if changing a field without a fixed list of values
++ - made a few changes to the native ATM data delivery path to handle some
++ strangeness required by the IDT driver
++
++
++Version 0.21 to 0.22 (13-NOV-1996)
++====================
++
++Bug fixes
++---------
++
++ - (dummy) depend target was missing in atm/man (reported by Bernd Wolf)
++ - net/atm/arequipa.c:make_aq_vcc didn't set ATM_VF_AQINUSE, thereby allowing
++ race conditions to slip through
++ - fixed a few potential race conditions when activating Arequipa
++ - text2qos didn't complain if unit was omitted after multiplier, allowing
++ misleading settings like pcr=50M (that's 19.2 Gbps)
++ - SSCOP: took wrong branch if POLL_AFTER_RETRANSMISSION was enabled (fix by
++ Jonathan Larmour)
++ - SSCOP: rel_ind for ENDAK and BGREJ PDU in sscop_inconn was sent with "user"
++ = 1 (must be 0 for "Source := SSCOP")
++ - initialize_vr_mr now initializes vr_mr to a constant value (instead of
++ garbage plus constant value)
++ - atm_recvmsg now ignores msg->msg_name, as it should by POSIX 1003.1g (fix by
++ Mike Wooten)
++ - atm_sendmsg now fails with EISCONN instead of with EINVAL if msg->msg_name
++ is set, as it should by POSIX 1003.1g (reported by Mike Wooten)
++ - atm_recvmsg and atm_sendmsg now return ENOTCONN if not connected and
++ EOPNOTSUP if flags are passed, as they should by POSIX 1003.1g
++ - the QOS zeppelin uses for its connections can now be set with the option -q
++ - atmarpd didn't include the QOS in PVC entries, so atmarp -a complained about
++ them
++
++New features
++------------
++
++ - kernel changes to support tcpdump with LANE (by Marko Kiiskila)
++ - patch for tcpdump 3.0.4 (installed as tcpdump_atm) to support Classical IP
++ and LANE (by Marko Kiiskila)
++ - patch for BIND 4.9.5 to support ANS (ATM Name Service) functionality (by
++ Marko Kiiskila)
++ - added hierarchy extra/ for packages for which only patches are contained in
++ the ATM on Linux distribution
++ - enhanced text2atm to use ANS if local lookups fail (atm2text will be updated
++ later)
++ - wrote script extra/hosts2ans.pl to convert hosts.atm file to ANS zone files
++
++Other changes
++-------------
++
++ - changed ATM_VF_AQINUSE to ATM_VF_AQDANG and changed aq_list membership to
++ be for dangling VCs only
++ - added the new command-line options to ttcp_atm's online help (finally !)
++ - atm_sendmsg now returns error codes from the driver's send function
++ (suggested by Jonathan Larmour)
++ - text2qos now performs a syntax check if NULL is passed in the qos argument
++ - various minor LANE cleanup (Marko Kiiskila)
++ - upgraded to the latest version of t2a.pl
++ - {A2T,T2A}_REMOTE is obsolete; instead, {A2T,T2A}_LOCAL should be used if
++ ANS lookups are _not_ desired
++
++
++Version 0.20 to 0.21 (18-OCT-1996)
++====================
++
++Bug fixes
++---------
++
++ - net/atm/common.c:atm_connect didn't refuse traffic_class == ATM_NONE in both
++ directions
++ - include/linux/atmsvc.h:SELECT_TOP_PCR didn't default to ATM_MAX_PCR if
++ min_pcr == 0 && max_pcr == 0
++ - debug/delay swallowed one-byte packets
++ - oops, forgot man/Makefile, so qos.7 wasn't installed
++ - atmarpd left max_sdu at zero for automatically generated entries
++ - atmarpd now only uses the default QOS if the traffic type is set in neither
++ direction
++ - signaling: if the listen queue was full, new connections were rejected with
++ as_close instead of as_reject, thereby upsetting atmsigd
++ - svc_accept didn't adjust the listen queue quota when rejecting incoming
++ connection requests
++ - fixed a few bad font selections in atmsigd(8)
++
++New features
++------------
++
++ - included the window scale patch by Randy Scott <scottr@belle.bork.com> and
++ Robert Hill <rhill@tisl.ukans.edu>
++ - -q option for ilmid to set the QOS (like in atmsigd)
++ - new script mkbindist to install the utilities into a tar.gz file
++
++Other changes
++-------------
++
++ - debug/delay now prints the usage if invoked without arguments
++ - removed the pretentious usec resolution for delays in debug/delay
++ - removed the UBR semantics change warning
++ - qos.7: clarified that bps are the user data rate
++ - arequipa_attach_unchecked now also adjusts the upper layer MTU (which can
++ violate RFC1122, but I'll tackle that later)
++ - text2qos now also accepts fractional values, e.g. 9.6kbps
++
++
++Version 0.19 to 0.20 (14-OCT-1996)
++====================
++
++Bug fixes
++---------
++
++ - fixed a few typos and errors in the 0.18 to 0.19 change log
++ - signaling traces only included hl_type bytes instead of hl_length
++ bytes
++ - TNET1570 driver: various fixes (DMA allocation, seg ring overflow,
++ timeouts, etc.) (Christian Paetz)
++ - TNET1570 driver: removed most compiler warnings (Christian Paetz)
++ - listen() on an arequipa_preset() socket and arequipa_preset() on a listening
++ socket now both return EPROTO
++ - oops, forgot to enable the "rm" in make uninstall
++ - kernel didn't set interface number field in act_create messages to atmarpd
++
++New features
++------------
++
++ - added ioctl ATM_SETSC to enable or disable RX and TX single-copy per VC
++ - new device driver operation change_qos (not yet implemented)
++ - TNET1570 driver supports DEC Alphas and 64 bit PCI transfer (for CIA PCI
++ chipsets) (Christian Paetz)
++ - TNET1570 driver also supports the UniNET1570 board (Christian Paetz)
++ - new functions text2qos and qos2text to convert between textual and binary
++ QOS specifications (the format is described in man qos)
++ - atmarp -q ip_addr qos sets the default QOS to use for all VCs created for
++ that IP interface
++ - new utility debug/delay to use machine as AAL5-level delay line
++
++Other changes
++-------------
++
++ - NLPIDs and vendor-specific application identifiers are now collected in
++ the new file /usr/include/atmsap.h
++ - SO_ATMQOS now attempts to change the QOS settings when invoked on an active
++ connection
++ - included Matt Welsh's bigphysarea patch (this isn't related to ATM, but it
++ keeps my development source tree simpler)
++ - arequipa_preset now initializes max_sdu to RFC1626_MTU+RFC1483LLC_LEN if
++ zero
++ - atmarp: new option qos <spec> to set the QOS parameters (uses text2qos)
++ Use of pcr <pcr> is deprecated.
++ - ttcp_atm's -P option now also accepts a QOS specification string. (use of
++ -P <number> is deprecated.
++ - atmsigd: new option -q <qos> and configuration clause io qos <qos> to
++ set the QOS of the signaling VC. Use of -P <pcr> or io pcr <pcr> is
++ deprecated.
++ - removed the backward compatibility #define class traffic_class in
++ linux/atm.h
++ - removed obsolete keywords from atmsigd.conf language
++ - atmarp -a now also includes QOS parameters
++ - UBR now respects txtp.max_pcr if set
++ - new rules for the use of [rt]xtp.traffic_class: both fields must be either
++ equal or zero, e.g. ATM_CBR in TX and ATM_UBR in RX no longer works
++ - doc/usage.tex now points to the man pages instead of repeating their content
++
++
++Version 0.18 to 0.19 (27-SEP-1996)
++====================
++
++Bug fixes
++---------
++
++ - sscop.c:data_sd had a comparison inversed, so generation of USTAT PDUs was
++ wrong in some cases (by Juhana Rasanen)
++ - sigd_enq: accessed vcc->qos without checking for vcc == NULL, causing an
++ "Oops" in atmaddr
++ - svc_accept: generated a general protection fault when atmsigd was killed
++ while a process was waiting for new incoming connections
++ - atmaddr didn't zero the address structure before calling text2atm
++ - LANE: fixed usage of kernel timers and LE_ARP_REQUESTs should now get sent
++ until the entry expires or a response is received (by Marko Kiiskila)
++ - less compiler warnings from LANE servers (Marko Kiiskila)
++ - SSCOP: fixed SDU size in AA-RETRIEVE.indication (reported by Heinz Schuerch)
++ - NULL encapsulation for ATMARP works now (reported by Gerald Hanusch)
++ - fixed stray EINVAL from get{sock,peer}name on PVCs (reported by Gerald
++ Hanusch)
++ - clip now sets max_sdu to RFC1626_MTU+RFC1483LLC_LEN when using LLC/SNAP
++ encapsulation
++ - if parsing of a Q.2931 message fails, atmsigd now aborts the call instead of
++ (stupidly) trying to process the incomplete and probably inconsistent data
++ - SUNI driver didn't properly mask out unused highest bits of some statistics
++ counters, thereby yielding absurdly high values
++ - zatm: changed timing of RX channel closing, so the dreaded "can't close RX
++ channel" message should be history
++ - fixed race between Arequipa attachment due to packet reception and closing
++ of the Arequipa VC
++ - local address validity check (for ATM_???ADDR) was all wrong (reported by
++ David Simpson)
++ - message dumper ignored fatal errors if debugging was not enabled
++
++New features
++------------
++
++ - man pages for lecs, les, bus, and zeppelin (Marko Kiiskila)
++ - configuration file name for les and bus can be defined (Marko Kiiskila)
++ - zatm: new kernel configuration option CONFIG_ATM_ZATM_EXACT_TS now supports
++ reception timestamps with microsecond resolution (the accuracy is only in
++ the ms range, though)
++ - new utility znth (ZeitNet Timer History) to monitor timer synchronization
++ - LANE now supports up to 4 LEC network interfaces (Marko Kiiskila)
++ - the Q.2931 message parser now recovers nicely from IE errors, logs the
++ event, and continues parsing. The higher layers of the signaling stack
++ don't use this information yet, though.
++
++Other changes
++-------------
++
++ - Arequipa's BHLI now uses a "vendor-specific application identifier" under
++ the EPFL OUI
++ - moved buffer/queue handling from lib/libatmd to saal/, because it is rather
++ SSCOP-specific anyway
++ - atm_release_vcc now complains if rx_inuse != 0 when closing (if this ever
++ happens, it may point out dangerous races with upper layer protocols)
++ - SO_ATMQOS now issues a warning when using UBR with {min,max}_pcr != 0
++ - max_sdu is now set by atmarpd to MTU+RFC1483LLC_LEN (atmarp could still
++ override this, if necessary)
++ - atmdump: new option -i to display the arrival interval instead of the
++ absolute time. Also changed the time format to be more readable.
++ - updated the kernel configuration documentation to indicate that the SMC
++ ATM Power155 adapters are compatible with the Efficient ENI-155
++ - atmarpd now deletes the old table file (containing stale information) if
++ invoked with -d (debug)
++
++
++Version 0.17 to 0.18 (9-SEP-1996)
++====================
++
++Bug fixes
++---------
++
++ - atmsigd didn't respond to SETUP followed by RELEASE with a RELEASE COMPLETE
++ - atmsigd now implements incoming call rejection (as_indicate -> as_close)
++ - kernel now opens the VC before sending the as_accept. This a) allows to
++ check if the parameters are acceptable, and b) avoids a race condition
++ between the sender and the local VC open procedure, which frequently led to
++ loss of the beginning of the first PDU sent on a new connection.
++ - qdump: _q_parse used the wrong length when dumping variable-length fields,
++ yielding a fatal internal error
++ - clip didn't set rxtp.max_sdu
++ - svc_accept didn't set ATM_VF_HASQOS, so getsockopt SO_ATMQOS didn't work
++ (by Marko Kiiskila)
++ - ttcp_atm calculated Mbps as 2^20 bits/sec instead of 10^6, thereby making
++ all results come out approximately 5% too low (by Fraz Ahmad)
++ - added $(LDLIBS) to linking of lane/lecs (by Lawrence MacIntyre)
++ - interface number allocation in clip and atmarp did not check for collision
++ with the respective other name space
++ - atmarp's -c option didn't work when omitting the "atm" in the interface name
++
++New features
++------------
++
++ - new man page: arequipad.8
++
++Other changes
++-------------
++
++ - simplified the internal signaling protocol by adding the as_reject message
++ (sent by kernel in response to as_indicate; not acknowledged by demon)
++ - packets received from Arequipa are no longer forwarded to other hosts
++ - further ilmid improvements to use RSTADDR less frequently (by Gerald
++ Hanusch; with a slight modification)
++
++
++Version 0.16 to 0.17 (2-SEP-1996)
++====================
++
++Bug fixes
++---------
++
++ - lib/diag.c didn't fflush when logging to a file
++ - arequipad didn't accept the -l option
++ - qgen: possible weird crashes because second.c:find_required accessed
++ value->tag even if vt_id
++ - qgen: fixed wrong PC indication in one error message in _q_parse
++ - make spotless didn't know about new $(*PGMS) targets
++ - atmsigd: fixed memory leak when sending messages to the kernel
++ - atmarpd: fixed memory leak when sending messages to the network
++ - atmsigd: didn't send final as_close when kernel closed connection
++ immediately after requesting it (as_connect)
++ - several minor corrections
++
++New features
++------------
++
++ - added make target "uninstall" to remove all files installed by
++ make install
++ - atmsigd has two new options: -D dump_dir to set the dump directory and
++ -t trace_length to set the length of the trace buffer
++ - wrote a few man pages: atmarp.8, atmarpd.8, atmsigd.8, atmsigd.conf.4
++ - added automatic support for memory debugging if MPR is installed (and
++ included a patch to make MPR 1.1 work with ELF). atmarpd and atmsigd
++ currently use this feature.
++
++Other changes
++-------------
++
++ - changed "class" to "traffic_class" everywhere
++ - make install is now implemented in a more elegant way
++ - q.dump is now much better at finding symbolic names for numbers
++ - q.dump no longer prints zero-length fields
++ - qgen no longer includes constructor "microcode" in dumper
++ - atmarp now gives more informative error messages on ioctl failure
++ - removed obsolete ioctls SIOCGIFATMADDR and SIOCSIFATMADDR
++ - added hack to allow ilmid to be less hostile to locally configured addresses
++ (by Gerald Hanusch; with slight modifications)
++ - atmarpd now automatically sets ATF_PERM of PVC entries with NULL
++ encapsulation
++
++
++Version 0.15 to 0.16 (29-AUG-1996)
++====================
++
++Bug fixes
++---------
++
++ - fixed an "unterminated character constant" warning by CPP in qgen/uni3x
++ - atm/sigd/q2931.c always tried to read the Cause IE of RELEASE COMPLETE
++ messages even if it wasn't included
++ - LANE: fixed buffer allocation and VCC timeouts (Marko Kiiskila)
++ - LANE: when connecting directly to LES, name of the ELAN was not set
++ properly (discoverd by Gerald Hanusch; fixed by Marko Kiiskila)
++ - LANE, ATMARP, signaling: control sockets didn't account for messages sent
++ back from demons (fixed by Marko Kiiskila)
++ - permanent ATMARP entries for SVCs were ignored if no ATMARP server was
++ configured (reported by Gerald Hanusch)
++ - atmarp option "temp" mis-spelled as "term" (fixed by Gerald Hanusch)
++ - forgot to undo experimental rcvbuf/sndbuf change to unsigned long
++ - make modules didn't generate ATM modules
++ - atmtcp_attach_hook wasn't defined when compiling ATMTCP as a module
++ - ATM patch set dev->ip_atm to ether_arp in net/ppp.c and net/eql.c, so they
++ failed to work as modules
++
++New features
++------------
++
++ - added LANE servers (LECS, LES, and BUS) by Marko Kiiskila
++ - Rules.make: new variable INSTROOT for easier cross-installation
++ - atmsigd: added option -P to set the maximum PCR used on the signaling VC
++ - atmarp: added option "pcr <value>" (proposed by Gerald Hanusch)
++ - added the usual -l <logfile> option to arequipad
++
++Other changes
++-------------
++
++ - upgrade to kernel version 2.0.14
++ - SVCs can now be bound with any SEL value
++ - messages of size > quota can be sent if the send buffer is empty
++ - ilmid no longer empties the address list when refreshing the NSAP address
++ (by Gerald Hanusch)
++ - LANE client should now survive network reset (e.g. restart) gracefully
++ (Marko Kiiskila)
++ - LANE: major cleanup of zeppelin code (Marko Kiiskila)
++ - improved loadable module support for eni and zatm (i.e. loading works now)
++ - the message dumper can now be linked to programs that also use the
++ compilation/parsing functions
++
++
++Version 0.14 to 0.15 (31-JUL-1996)
++====================
++
++Bug fixes
++---------
++
++ - zatm: fixed traffic shaper settings for UBR (with a little help from Joern
++ Wohlrab)
++ - atmsigd compilation didn't use the same UNI version configuration as qgen
++ - field "class" in struct atm_traform broke compilation of ATM applications
++ written in C++, so it has been renamed to "traffic_class" (reported by
++ Furquan Ansari)
++ - AAL parameters IE wasn't included in CONNECT, which violated RFC1755
++ (discovered by Robert Olsson)
++ - zatm: removed broken sanity check for in-sequence skb delivery on RX
++ - clip didn't have clip_open function, so SIOCSIFFLAGS on the interface failed
++ with ENODEV
++ - single-copy compiles again
++ - zatm: driver doesn't pretend any longer to support single-copy (but
++ single-copy will come back later)
++ - QOS IE was sent with the wrong coding standard when using UNI 3.1 (with help
++ from Fraz Ahmad)
++ - zatm: forgot to remove some debugging code (around ZATM_TUNE)
++ - qlib.c didn't zero the length array, leading to (rare) "not enough space"
++ errors from QMSG (actually, the "break" mechanism seems to be flaky - will
++ have to check)
++ - fixed Arequipa race condition when the upper layer protocol and signaling
++ decided to close the SVC at the same time
++ - alloc_tx used to return NULL in out of memory conditions, thereby possibly
++ hanging atm_sendmsg
++
++New features
++------------
++
++ - ttcp_atm now also accepts names with -p
++ - (finally !) added send/receive buffer limits and cleaned up the use of
++ vcc->[rt]x_{inuse,quota}
++ - added mkdiff script for automatic generation of diffs
++ - Arequipa now works for PVCs too (but arequipad is now required for any
++ use of Arequipa, not only for incoming connections)
++
++Other changes
++-------------
++
++ - atm/atm-<version>.patch is now called atm/atm.patch (to make the diffs more
++ useful)
++ - the maximum SDU size is now checked in net/atm/common.c:adjust_tp
++ - text2atm/atm2text now accepts/generates E.164 addresses with a leading +
++ sign, as required by ANS (atm95-1532)
++ - internal signaling protocol: added message as_error to un-overload as_close
++ - internal signaling protocol: split as_establish into as_connect and
++ as_accept
++ - internal signaling prococol: as_close.reply no longer contains positive
++ numbers
++ - internal signaling prococol: as_bind now also carries the AAL type
++ - atmsigd: now also checks the AAL type in as_bind messages
++ - kernel signaling: a few minor changes
++ - STANDARDS (i.e. UNI version) configuration option has been moved from
++ atm/qgen/Makefile to atm/Rules.make
++ - atmsigd's startup message now gives more useful indication of which UNI
++ version(s) it supports
++ - signaling no longer uses sa[sp]_[rt]xtp, so ...
++ - sa[sp]_[rt]xtp is gone
++ - removed atm/sigd/svc.c from the distribution. We now have many other tools
++ for testing SVCs, so it's superfluous.
++ - atmarpd: revalidation is now less frequent (use -DFREQUENT_REVAL for
++ the faster timeout)
++ - ioctl CLIP_PVC now returns the number of the new interface and clip prints
++ its name to standard output (like atmarp -c)
++ - clip now issues the CLIP_PVC ioctl after binding, which avoids wasting
++ interface numbers on failed setup attempts
++ - atmsigd -d now sets the debug level for qgen and SSCOP to DIAG_INFO, and
++ doesn't set q_dump
++ - zatm: added protection against I > M
++ - atm_peek_aal5 now only aligns to page boundaries for pdu_size >= PAGE_SIZE
++ - eni driver now spits out CRC error messages at most every other second
++ - zatm driver now repeats RX error messages at most every other second
++ - ttcp_atm now sleeps for a second after setting up an SVC, because the
++ switch seems to lag behind (need to examine this further)
++ - moved SAAL from sigd/ to saal/ (for sharing with UNI 4.0 signaling)
++ - Arequipa sockets are now closed via arequipad instead of via atmsigd (new
++ ioctls AREQUIPA_CTRL and AREQUIPA_CLS3RD)
++ - various minor changes
++
++
++Version 0.13 to 0.14 (19-JUL-1996)
++====================
++
++Bug fixes
++---------
++
++ - LANE: reaction to LE_ARP_RESPONSE's wasn't always correct
++ - LANE: compiler warnings fixed
++ - LANE: comparing ATM addresses in checking whether connection is formed was
++ wrong
++ - zntune didn't divide by 1024 when displaying the "k"
++ - .depend wasn't deleted by make spotless
++ - ATM_GETSTAT and ATM_GETSTATZ used wrong argument type for coding ioctl
++ number. WARNING: programs using ATM_GETSTAT{,Z} need to be recompiled.
++ - requests to set up SVCs with ATM_NONE in both directions are now caught by
++ svc_connect (used to yield an invalid SETUP message)
++ - signaling: fixed connection identifier setting when acting as network side
++ (fix by Elwyn B Davies)
++ - ATMARP server ARP entries were undeletable
++ - atmarp showed wrong argument in error message when given an invalid ATM
++ address
++ - zatm: do_tx left interrupts turned off when returning with RING_BUSY
++ - LANE ARP hash table handling bugs fixed
++ - atmarp: act_create is now only sent on interface creation
++ - atmarp: act_down is now only sent once per transition
++ - demon control SVCs are no longer closed when atmsigd dies (new VCC flag
++ ATM_VF_META)
++ - netdevice notifier is now properly unregistered when atmarpd goes down
++ (not doing so caused endless loop in kernel on atmarpd restart)
++ - sigd_enq{_atomic} never calls schedule()
++ - atmsigd no longer "forgets" to bring up ARP server SVC before sending an
++ InARP
++ - atmarpd no longer dies with "timer in state 3" when the ARP server becomes
++ unreachable
++ - atm/atmarp.c: clip_create() now refuses creation of already existing
++ interface
++ - Documentation/Configure.help gave an obsolete URL for CONFIG_AREQUIPA
++ and doc/usage.tex also mentioned the old file name
++ - Arequipa didn't work in the outbound direction for TCP, because
++ net/ipv4/tcp.c was missing in the kernel patch
++ - drivers/atm/eni.c:foo raced with initialization of eni_boards if the
++ board lost the signal _immediately_ after being initialized
++ - atmarpd: fixed a few uninitialized entry->timer pointers (discovered by
++ Gerald Hanusch)
++ - atmarpd: arps entry should no longer get stuck in as_resolv
++
++New features
++------------
++
++ - compiles on SparcLinux too (but only atmtcp works)
++
++Other changes
++-------------
++
++ - upgrade to kernel version 2.0.0
++ - BHLI matching changed: SAPs without BHLI are now incompatible with calls
++ that specify a BHLI
++ - LANE: interface stays up when zeppelin dies -> possibility for
++ wrapper script around zeppelin
++ - LANE: LUNI interoperability test (ATM Forum/96-0805) is now followed
++ in setting ELAN name in LE_CONFIG_RESPONSE and LE_JOIN_RESPONSE,
++ there is also a delay of 1 second before sending LE_CONFIG_REQUEST and
++ LE_JOIN_REQUEST. This allows 'slow' LE servers to catch up.
++ - LANE: no longer uses sa[sp]_[rt]xtp
++ - LANE: now adjusts better to ATM address changes
++ - zeppelin: new option -m to select debugging output
++ - updated aping, aread, awrite, br, bw, atmdump, ilmid, atmarp, clip, atmarpd,
++ and zeppelin to use setsockopt SO_ATMQOS
++ - added option -x for ilmid to disable variable bindings (caused
++ interoperability problems with certain switches, e.g. the LS100)
++ - changed SO_CIRANGE into a pair of ioctls
++ - changed return value of fetch() (passed to atm_vcc->peek) from unsigned long
++ to __u32
++ - atmarp now accepts arpsrv option also for -d
++ - zatm driver can now also read ESIs of rev. 10 boards (with help from Nikos
++ Anerousis)
++ - awrite: fixed txtp.max_sdu calculation in awrite (was using uninitialized
++ variable "offset")
++ - atmarpd: IP interface removal now has the desired effect (used to do
++ nothing)
++ - atmarpd: now reports and ignores unexpected interface transitions
++ - added sigd_enq_atomic for atomic sigd_enq (so that non-Arequipa SVCs can
++ still use the "safe" but non-atomic version)
++ - made SIOCGIF* failures in atmarpd non-fatal (itf.c:itf_up was handling them
++ anyway)
++ - moved Arequipa-specific code from net/atm/clip.c to net/atm/arequipa.c, and
++ put code common to CLIP, Arequipa, and - to a lesser extent - ATMARP into
++ net/atm/ipcommon.[ch]
++ - Arequipa can now be complied without CLIP
++ - various minor documentation changes
++ - moved ATM device initialization from net/atm/pvc.c to drivers/block/genhd.c,
++ where most other devices are initialized too
++ - preparation for new binary locations: tools build process now knows about
++ four types of programs: for booting, for system use, for users, and for
++ internal use during build
++ - make install now hides the for loops
++ - non-user binaries are now installed in /usr/local/sbin
++ - struct atm_iobuf.buffer is now of type void * (was int*). Also,
++ ATM_GETNAMES now returns the length in bytes in that field.
++
++
++Version 0.12 to 0.13 (7-JUN-1996)
++====================
++
++Bug fixes
++---------
++
++ - BHLI type used the ATM_HL_* values (which are off by one) in qgen/uni3x
++ - atmarpd ended up in a tight select-accept loop if atmsigd went away
++ - removed sleep in ZATM's do_tx (so it works with IP over ATM again)
++
++New features
++------------
++
++ - added experimental support for Application requested IP over ATM (Arequipa),
++ prototyped by Jean-Michel Pittet
++ - new traffic class ATM_ANYCLASS to accept incoming SVCs without looking at
++ the traffic parameters
++ - added (untested) support for SO_BCTXOPT/SO_BCRXOPT
++
++Other changes
++-------------
++
++ - SVCs used to listen are now marked as "LISTEN" in /proc/atm/svc
++ - added option -Q <atm_addr> to ttcp_atm to support AREQUIPA
++ - cleaned up the FILE macro and removed atm_dir in net/atm/proc.c
++
++
++Version 0.11 to 0.12 (3-JUN-1996)
++====================
++
++Bug fixes
++---------
++
++ - atm/lib/Makefile: had to comment out PGMS=test
++ - distribution didn't include atm/doc/usage.txt
++ - patch didn't include arch/i386/config.in
++ - return 0; was missing at the end of net/atm/mmuio.c:mmu_step
++ - atm/ilmid didn't install into INSTBIN; also made some other Makefile
++ changes
++ - read() returned garbage instead of error when network drops connections
++ - POLL_AFTER_RETRANSMISSION in SSCOP didn't even compile
++ - SVCs: bind to wildcard addresses should now work even if no local address
++ is known yet
++ - make clean in atm/qgen left some dirt
++ - ATM drivers didn't free skbs when detecting an error in TX direction
++ - SIOCMKCLIP was in the wrong #ifdef, so CLIP had to be enabled to make
++ ATMARP usable
++ - signaling didn't respond properly to messages with non-existent call
++ reference
++
++New features
++------------
++
++ - merged in LAN Emulation client support written by Marko Kiiskila
++ - new socket option SO_ATMQOS at SOL_ATM to set/get QOS parameters
++
++Other changes
++-------------
++
++ - t2a.pl now also works with Perl 5.001
++ - changed the TX side of the ZATM driver to use a ring instead of a list in
++ order to improve stability and throughput (needs some more testing)
++
++
++Version 0.10 to 0.11 (21-MAY-1996)
++====================
++
++Bug fixes
++---------
++
++ - README.DRIVERS still referenced INSTALL (it's now in USAGE)
++ - sap_decode didn't clear BLLI part of address structure
++ - trying to connect to NULL address fails locally instead of yielding an
++ invalid SETUP message
++ - bind now properly sets the local address
++ - SVC getname now returns the traffic parameters
++ - oops, zatm open_tx didn't return PCR
++ - awrite printed errors for connect() as "bind: ..."
++ - atmsigd no longer generates dummy call references (0x7fffff)
++ - atmtcp: changed a few kfree_skb to dev_kfree_skb, which should make it
++ work better (does anybody care to try ?)
++ - some more dev_kfree_skb fixed for control messages from or to demons (led
++ to some minor memory leaks)
++ - various major fixes for CBR SVCs
++ - RELEASE was signaled for SVCs before all data was sent
++ - single copy tried to access mem_map with user space addresses, leading to
++ crashes or worse
++ - zatm: sleep_on was racing with TX completion in close_tx, leading to hangs
++ - zatm: now fails attempts to open AAL0 VCs (used to accept them and to
++ crash later)
++ - BHLI encoding/decoding was broken in several ways
++
++New features
++------------
++
++ - hacked in primitive leaf-only p2m support (based on an idea by Marko
++ Kiiskil{)
++ - the socket layer, and the zatm, eni, and atmtcp drivers now support
++ two-phase connect
++ - PVCs now respect max_pcr (SVCs can't for now)
++ - lib/diag.c can now also log to a file or to syslog, and atmarpd, atmsigd,
++ and ilmid now have a -l option to use that
++ - new option -c config_file for atmsigd
++ - zatm and atmtcp now also support timestamps (but zatm timestamps can be
++ improved a lot by using the timestamps the uPD98401 generates)
++ - Classical IP over ATM support is now configurable
++ - added on-line help texts for configuration
++ - added atm/test/aping, a round-trip tester for PVCs
++ - added "flags" field to struct atm_dev and to atm_dev_register, on request
++ by Bureau 13
++
++Other changes
++-------------
++
++ - past versions of the BUGS list aren't included in the distribution anymore
++ because I didn't update them anyway
++ - invalid connect() calls now return an error instead of panicing atmsigd
++ - text2atm no longer clobbers sas_addr.{blli,bhli}
++ - greatly simplified zatm traffic shaper settings calculation (and it's
++ better than before too)
++ - atmsigd: diagnostics class "sig" (in atmsigd.conf) now also includes "SAP"
++ - DPRINTK now uses GNU-specific #define foo(bar...)
++ - signaling: PCR is now also indicated (0) for directions in which ATM_NONE
++ is requested, which is probably "cleaner" (for CBR)
++ - added logging priorities to most printks
++ - the default location for atmsigd.conf changed from . to /etc
++ - ipv4/af_inet.c: atmtcp_attach_hook is now only included when using ATM over
++ TCP
++ - configuration options for extended driver debugging, (old) CLIP, and
++ ATM over TCP are turned off by default
++
++
++Version 0.9 to 0.10 (21-MAR-1996)
++===================
++
++Bug fixes
++---------
++
++ - zatm: deallocated UBR shaper when closing UBR VC, which the other UBR VCs
++ didn't really appreciate
++ - fixed nasty memory leak for native ATM (spotted by Rolf Fiedler)
++
++New features
++------------
++
++ - added Rolf Fiedler's driver for his adapter based on the TI TNETA1570
++ - single-copy is back again !
++
++Other changes
++-------------
++
++ - eni buffers are now slightly (50%) bigger, allowing for more effective
++ overlapped operations
++ - documented zntune
++
++
++Version 0.8 to 0.9 (14-MAR-1996)
++==================
++
++Bug fixes
++---------
++
++ - oops, accidently removed ZN1221 from drivers/pci/pci.c (so /proc/pci
++ reported it as "unknown")
++ - sigd didn't poll for the default interface on startup
++ - atmarpd didn't initialize timer field in newly allocated table entries,
++ which led to crashes
++ - removed a few stray debugging printks in net/atm/svc.c:svc_bind
++ - ATMARP tried to send queued packet before adding new table entry, so the
++ packet was always discarded
++ - sigd/sap.c: didn't allow to use different traffic classes for fwd and bwd
++ direction
++ - atm2text accepted SVC addresses of all zeroes
++ - atmsigd didn't refresh its local address list properly after ilmid restart
++ - net/atm/common.c: returned positive error codes (-vcc->reply) instead of
++ negative ones
++ - forgot to include maint/zntune.c in the distribution
++
++New features
++------------
++
++ - sigd/svc now accepts ATM addresses in all formats supported by text2atm
++
++Other changes
++-------------
++
++ - upgraded to kernel version 1.3.73
++ - the called party number must now match the local address (if bound)
++ - renamed ttcp.atm to ttcp_atm
++ - all executables are now explicitly linked (so make works even without
++ dependencies)
++
++
++Version 0.7 to 0.8 (12-MAR-1996)
++==================
++
++Bug fixes
++---------
++
++ - fixed stray segmentation violation in arpd/arp.c:learn
++ - fixed coding standard of the QoS IE if using UNI 3.0 (and made coding
++ standard variable)
++ - made coding standard variable for Cause IE
++ - SSCOP didn't properly set N(MR)
++ - list elements in STAT PDUs had host byte order
++ - SSCF didn't call sscop_estab_resp on restart (AA-EST.ind in 1/1)
++ - signaling didn't handle SAPs with >= 2 BLLI IEs properly
++ - uni3x: iso_hli and user_hli were confined to 7 bytes, but UNI allows up to 8
++ - q_read choked on non-variable-length fields
++ - qgen sometimes didn't read all IEs of a signaling message
++ - fixed usage line of test/bw
++ - qgen no longer complains about missing required fields after a break
++ - fixed compiler warning in zntune.c
++ - fixed ATMARP table additions (caused GPF when flushing ATMARP entry at
++ the end of the table and possibly other problems)
++ - qgen: q_put or'ed data instead of overwriting it, which caused problems
++ only on surprisingly few occasions
++
++New features
++------------
++
++ - atm2text and text2atm now also do name lookups via a /etc/hosts.atm file
++ - atmaddr, atmarpd, and atmsigd now pretty-print addresses using name
++ translation (unless invoked with -n)
++ - atmarpd now dumps its table into /var/run/atmarpd.table and atmarp -a
++ reads it from there
++ - started modularizing the ENI and ZATM drivers
++ - ilmid and atmsigd now support multiple interfaces (untested)
++
++Other changes
++-------------
++
++ - the documentation is now available in LaTeX and in ASCII
++ - rewrote most of the SAP handling code (now everything is in sigd/sap.c)
++ - proto.c:lookup_sap now picks wildcard SAP last
++ - signaling always includes SSCS type = 0 in SETUP messages (for LANE)
++ - changed the message format for the the kernel-demon signaling protocol
++ - qgen is now a bit more tolerant when being fed with bad data
++ - qgen now assumes that q_report(Q_FATAL,...) doesn't return
++ - marked sigd/test.c as obsolete
++ - svc_accept failing in atm_connect no longer returns success
++ - atmsigd -n is now atmsigd -N
++ - qgen now puts the PC in q.out.c and qd.out.c at the beginning of the code
++ line and not on a line by itself
++
++
++Version 0.6 to 0.7 (2-FEB-1996)
++==================
++
++Bug fixes
++---------
++
++ - removed TTL setting ioctl (1234) used for something entirely unrelated to
++ ATM, oops
++ - changed kfree_skb in atm_pop_raw to dev_kfree_skb (this fixes the socket
++ "leak")
++ - more unusual configurations (no PCI, no IP, no /proc) should compile now
++ - atm_equal didn't recognize wildcards in embedded E.164 addresses
++ - fixed net/atm/proc.c:svc_addr (too many bugs to mention)
++ - atmarpd didn't check for ARP traffic on inbound connections
++ - atmarpd didn't properly merge incoming connections with existing entries
++ - various other ATMARP fixes
++ - free list was too short in ENI driver for worst case fragmentation on
++ 2 MB boards
++ - signaling didn't set ISO/IEC TR9577 IPI and NLPID correctly in active open
++ - getname looked at *sockaddr_len, which is uninitialized (need to fix this
++ later in the common socket code)
++ - SSCOP generated incorrect error code ("1" instead of "B") for BGN PDU
++ problems
++
++New features
++------------
++
++ - new ioctls ATM_GETADDR, ATM_RSTADDR, ATM_ADDADDR, and ATM_DELADDR to
++ manage local ATM addresses
++ - signaling now handles incoming RESTART, SAAL failure, and SAAL
++ re-establishment
++ - ATMARP now times out idle connection; ATMARP_MKIP ioctl takes a timeout
++ argument
++ - ATMARP (kernel) now queues one skb per pending ARP request and limits the
++ rate of requests for the same address (default 2 req/min)
++ - atmsigd now prints cause values when receiving a RELEASE or a RELEASE
++ COMPLETE and returns more informative error codes
++ - atmarpd falls back to PVC-only operation if signaling is unavailable at
++ startup
++ - kernel can now assign next free number on IP interface creation (atmarp
++ prints the interface name)
++ - qgen -D generates a Q.2931 message dumper (see USAGE for details)
++ - qgen now checks for proper use of repetition indicator (but doesn't
++ support repeated IEs yet)
++ - protocols and device drivers can now use their own memory allocator in the
++ TX direction by changing vcc->alloc_tx
++
++Other changes
++-------------
++
++ - upgraded to kernel version 1.3.53
++ - build process now uses Perl
++ - ATM ioctls writing back data now always return the size of the data
++ structure written
++ - struct atmif_sioc now has a length field (recompile all atmarpd, ilmid,
++ debug/ed, and everything in maint)
++ - PHY driver no longer has to check validity (permissions and access) for
++ "standard" ioctls
++ - signaling should now also work on an interface > 0 (but there's still only
++ one interface using signaling per host)
++ - make install now adds /usr/include/atm.h and /usr/include/atmd.h
++ - atmarpd now also displays if SVC has been opened actively or passively
++ - atmaddr(8) now uses new ioctls and has different command-line syntax
++ and even has a man page
++ - example IP addresses in USAGE now conform to RFC1597
++ - diagnostics now also include the application name (optional)
++
++
++Version 0.5 to 0.6 (21-DEC-1995)
++==================
++
++Bug fixes
++---------
++
++ - ARP ioctls stopped working for most non-ATM devices, oops
++ - ATMTCP driver counted lack of memory as rx_err instead of rx_drop
++ - select on driver using polling may have hung
++ - atmarp man page and usage didn't indicate that the interface number is
++ optional
++ - restricted atmarpd and signaling control, and SIOCSIFATMADDR to the super
++ user
++ - atmtcp: fixed handling of VPI/VCI <= 0 for setsockopt(SO_CIRANGE)
++ - eni and zn driver had static UBR shaper pointer, making it difficult to have
++ more than one such device per system
++ - eni driver initialization didn't work properly in systems with ASIC Tonga
++ - suni.[ch]: confused MC (Master Config) and MCT (Master ConTrol) registers
++ - (SVC) accept now returns PVC -EAGAIN as -EBUSY because the operation cannot
++ be retried
++ - qgen: fixed several bugs in case handling (and made defaults work for
++ parsing)
++ - svc_dup passed PF_ATMSVC instead of AAL to svc_create
++ - plugged a few skb leaks in svc_accept
++ - text2atm didn't properly NUL-terminate E.164 addresses
++
++New features
++------------
++
++ - ZN1221 driver works partially for AAL5 (still hangs after a few dozen MB)
++ (also wrote maint/zntune to monitor/adjust free buffer pools)
++ - ENI driver now supports new Tonga ASIC boards
++ - added Scott Shumate's ILMI demon (for automatic address registration)
++ - text2atm: added wildcard support for SVCs (syntax: addr/bits)
++ - new library function atm_equal to compare SVC addresses
++ - new ioctl ATM_GETTYPE to obtain interface type name
++ - new ioctl ATM_GETESI to obtain ESI (parallels /proc/atm/devices)
++ - new ioctls SONET_SETFRAMING, SONET_GETFRAMING, and SONET_GETFRSENSE to
++ handle SONET vs. SDH framing
++ - added socket option SO_AALTYPE (SOL_AAL) to query AAL type (getsockopt
++ only)
++ - signaling demon is now notified on address changes (new message
++ as_itf_notify)
++
++Other changes
++-------------
++
++ - known bugs are now listed in a file called BUGS
++ - all utility programs (aread, awrite, atmdump, br, bw, clip, ttcp) now use
++ the notation [itf.]vpi.vci for PVCs (was itf vpi vci , except for ttcp,
++ where it was only vpi vci (no itf))
++ - all ioctl values have changed
++ Note: most programs have to be recompiled because of this
++ - sigd and arpd now register their control sockets via ioctls
++ - (old) clip now creates interfaces with an ioctl
++ - text2atm now returns the wildcard length, i.e. a non-zero return value
++ no longer implies failure
++ - push_oam now returns an int (was void)
++ - push_oam now has several flags (in a bit set) instead of the immed
++ argument
++ - the peek function must now update the statistics if it rejects a packet
++ - (ATM device) close is now only invoked after a successful open
++ - the SUNI_GETLOOP ioctl now has an int * argument (was unsigned long *)
++ - uPD98402 driver no longer tries to detect return of the signal (didn't
++ work anyway - would have to sample section errors)
++ - ATMARP no longer supports mixed PVC/SVC entries (I'm sure this will be
++ missed a lot :-)
++ - ATMARP no longer supports "IP address discovery" via InARP for PVCs
++ (maybe later)
++ - specifying an invalid AAL now yields EPROTOTYPE
++ - specifying an invalid address family (connect, bind) now yields EAFNOSUPPORT
++ - make install now also installs libraries (in /usr/lib)
++ - improved many header file comments
++ - re-arranged some comments to simplify automated document generation
++ - added copyright statement
++ - UNI 3.0 IE fields are now always recognized (but we shouldn't generate them)
++ - UNI 3.0 wants octet 5a when using BCOB-X, so we'll set it to twice "No
++ indication"
++ - aread, awrite, br, bw, ttcp, atmsigd, and atmdump now set max_sdu
++ - aread and awrite no longer print strerror(errno) on success
++
++
++Version 0.4 to 0.5 (26-OCT-1995)
++==================
++
++Bug fixes
++---------
++
++ - now only root can open a CLIP socket (thereby creating an IP interface)
++ - now only root can issue CLIP_NULENCAP and CLIP_LLCENCAP ioctls
++ - atmdump: forgot default in getopt switch
++ - eni driver: called misc_int on every interrupt
++ - Q.2931 message description: various fixes and improvements
++ - linux/atm.h: ATM_*_UNSPEC used the same value as ATM_*_ANY, oops !
++ - SSCOP is now more careful about not accessing the descriptor if it might
++ possibly have been deleted
++ - typo in SSCF leading to wrong response to AA-RECOVER.indication
++ - SSCOP now correctly copies N(PS) from POLL to STAT PDUs
++ - SSCF now discards data when not ready instead of issuing a fatal error
++ - AAL initialization failure no longer leaks memory
++ - closing an SVC without VCC no longer yields a GPF
++
++New features
++------------
++
++ - ZN1221 driver is starting to work
++ - new, ARP-based mechanism for IP over ATM (with atmarpd, atmarp, etc.)
++ - /proc/atm/pvc now displays more information for CLIP PVCs (after a patch
++ by Raghavan Menon)
++ - added max_pcr to struct atm_trafprm (also fixed a few comments in atm.h)
++ Note: all programs using sockaddr_atm* will have to be recompiled.
++ - qgen now handles value lists in named selections
++ - signaling now supports bhli/blli, plus various other minor extensions
++ - new ioctls to set/get local ATM address
++ - added library with address to/from text conversion functions
++ - finally implemented getname()
++
++Other changes
++-------------
++
++ - eni driver: avoided potential generation of superfluous code if extended
++ debugging is disabled
++ - eni driver: detects new boards using ASIC PCI chip (doesn't support them
++ yet, though)
++ - qgen: semicolon is now comment character and no longer used to terminate
++ clauses
++ - qgen: replaced term "item" with "field"
++ - linux/include/atmsap.h: removed obsolete comment "protocol cannot be fully
++ encoded in current structure". Also re-arranged some comments to simplify
++ automated document generation.
++ - saal,sscf,sscop: callbacks don't pass the pointer to the descriptor of the
++ calling protocol anymore
++ - SSCOP no longer prints a number for non-'V' errors
++ - improved handling of STATUS messages
++ - select now indicates ready for writing if max_sdu packet can be enqueued
++ without blocking
++ - select can now also be used to check status of non-blocking connect
++ - moved some common demon functions from sigd into a common demon library
++
++
++Version 0.3 to 0.4 (27-SEP-1995)
++==================
++
++Bug fixes
++---------
++
++ - various minor documentation fixes
++ - clip.c:atm_push_clip now updates statistics before forwarding the skb to
++ the upper layer (which may free and overwrite the skb)
++
++New features
++------------
++
++ - added partial UNI 3.x signaling
++ - added various adapter debugging programs to the distribution
++ - new config option CONFIG_ATM_ENI_DEBUG to enable extended debugging
++ in eni driver
++
++Other changes
++-------------
++
++ - upgraded to kernel version 1.3.24
++ - changed the distribution directory structure (programs are now in maint/,
++ test/, ip/, debug/, and sigd/, see INSTALL)
++ - ATM interfaces are no longer named, only numbered. This affects the
++ ATM_GETNAMES ioctl, all ioctls using struct atmif_sioc, the usage of atmdiag
++ and sonetdiag, and various diagnostic kernel messages.
++ - ATM socket state is now recorded in field "flags" (this also replaces the
++ SVC fields "released", "registered", and "state")
++ - added #ifdef __KERNEL__ to some header files
++ - added "int immed" argument to send_oam
++ - some minor modifications to the distribution process (mkdist)
++ - removed devmap.c
++ - SVC sockets no longer hang if the signaling demon dies
++
++
++Version 0.2 to 0.3 (8-SEP-1995)
++==================
++
++Bug fixes
++---------
++
++ - select(2) didn't work (was sleeping on sock->wait instead of
++ &ATM_SD(sock)->sleep)
++ - ENI driver did allow binding to VPI/VCI already in use
++ - ENI driver now properly handles PDUs with CRC errors
++ - ENI driver had race condition when discarding PDUs causing new PDUs to be
++ shifted in adapter memory by one word (which confused the driver quite a
++ bit)
++ - ENI driver now enables VC _after_ setting all pointers (caused crashes if
++ data was already coming in while opening VC)
++ - various bugs fixes related to SVC sockets
++ - fixed GPF (in kernel) when running atmdiag without arguments
++ - atmdiag now left-adjusts interface names
++ - fixed ttcp.atm crash when not specifying vpi.vci
++ - clip_xmit now checks for NULL vcc (e.g. after failure to connect)
++
++New features
++------------
++
++ - zatm driver now reads ESI correctly
++ - blocking svc_connect is now interruptible
++ - atmdump now also displays the numeric PTI value of incoming cells
++ - added RX/TX buffer quotas (default is 64 kB)
++ - added OAM hooks to device driver interface (but there's no OAM support yet)
++
++Other changes
++-------------
++
++ - ENI driver now checks ID field of reassembly buffer descriptors
++ - ENI driver now uses vremap
++ - ENI driver now prints more useful physical layer type information (e.g.
++ "MMF" and "UTP" instead of "UTOPIA")
++ - some redesign of the protocol used for signaling between kernel and demon
++ - disabled "Grr, servicing VCC twice" message in ENI driver
++ - device drivers now have to adapt AAL0 cell header byte order
++ - some cleanup in common.c:atm_getsockopt
++ - device drivers are now required to use the peek function; protocols now
++ must provide it
++
++
++Version 0.1 to 0.2 (15-AUG-1995)
++==================
++
++Bug fixes
++---------
++
++ - VCC family field is now correctly set to protocol family in
++ common.c:atm_create (was pvc.c:pvc_create). With protocol set to zero,
++ this created all types of strange problems, because the family field
++ is used to indicate whether an VCC slot is busy/free.
++ - fixed race condition in common.c:atm_read (reader might have blocked
++ even if data is ready)
++ - fixed dereferencing of uninitialized skb->dev pointer in
++ clip.c:atm_push_clip
++ - SIOCSIFATMTCP now refuses to attach the same socket twice
++ - zatm.c: fixed setting of the VPI/VCI mask
++ - USAGE said ttcp uses -B for the bandwidth, but it's -P
++ - mkdist didn't include man pages
++
++New features
++------------
++
++ - added some /proc/atm functionality
++ - added support for ATM_{VPI,VCI}_ANY
++ - SIOCSIFATMTCP now returns the interface number and atmtcp(8) prints it
++ - wrote atmtcp man page
++ - added kernel part of SVC support
++
++Other changes
++-------------
++
++ - common.c: only root is now allowed to bind to reserved VCIs
++ - Classical IP interfaces are now removed by downing by ifconfig; clip(8)
++ returns immediately
++ - PVC-connect for non-existing device now returns ENODEV instead of EINVAL
++ - new field (type) in struct atm_dev to indicate device type
++ - moved getsockopt(SO_CIRANGE) to common.c (removed atmtcp's own version)
++ - added ci_range to struct atm_dev (and removed it from atmtcp's private
++ structure)
++ - added code to read the ESI to zatm.c (but that code doesn't seem to work
++ yet)
+--- linux-atm-2.4.1.orig/debian/atm-tools-br2684.manpages
++++ linux-atm-2.4.1/debian/atm-tools-br2684.manpages
+@@ -0,0 +1 @@
++debian/tmp/usr/share/man/man8/br2684ctl.8
+--- linux-atm-2.4.1.orig/debian/atm-tools.atm
++++ linux-atm-2.4.1/debian/atm-tools.atm
+@@ -0,0 +1,27 @@
++#!/bin/sh
++# Start/stop the atm daemon(s).
++
++DAEMON="/sbin/atmarpd"
++
++test -f $DAEMON || exit 0
++
++case "$1" in
++start) echo -n "Starting ATM ARP Daemon: "
++ start-stop-daemon --start --quiet --exec $DAEMON -b
++ /bin/sleep 2
++ echo "atmarpd."
++ ;;
++stop) echo -n "Stopping ATM ARP Daemon: "
++ start-stop-daemon --stop --quiet --exec $DAEMON
++ echo "atmarpd."
++ ;;
++restart|force-reload) echo -n "Re-starting ATM ARP Daemon: "
++ start-stop-daemon --stop --quiet --exec $DAEMON
++ start-stop-daemon --start --quiet --exec $DAEMON -b
++ /bin/sleep 2
++ echo "atmarpd."
++ ;;
++*) echo "Usage: /etc/init.d/atm start|stop|restart|force-reload"; exit 1
++ ;;
++esac
++exit 0
+--- linux-atm-2.4.1.orig/debian/atm-tools.docs
++++ linux-atm-2.4.1/debian/atm-tools.docs
+@@ -0,0 +1,4 @@
++BUGS
++README
++doc/README.tc
++debian/README.br2684
+--- linux-atm-2.4.1.orig/debian/control.old
++++ linux-atm-2.4.1/debian/control.old
+@@ -0,0 +1,72 @@
++Source: linux-atm
++Section: net
++Priority: optional
++Maintainer: Peter De Schrijver (p2) <p2@mind.be>
++Build-Depends: debhelper (>> 4.0.0), bison, flex, perl, dpatch, automake1.4
++Standards-Version: 3.6.1
++
++Package: atm-tools
++Architecture: any
++Depends: ${shlibs:Depends}
++Description: Base programs for ATM in Linux, the net-tools for ATM
++ This package provides all the basic programs needed for setting up,
++ monitoring and tuning ATM networks. Such as:
++ * atmsigd, an ATM signal daemon that implements the ATM UNI protocol.
++ * atmtcp, a tool to setup ATM over TCP connections.
++ * atmarpd, an implementation of the ATMARP protocol (RFC1577, RFC1755)
++ * zeppelin, an ATM LAN Emulation client daemon
++ * les and bus, ATM LAN Emulation service daemons
++ .
++ Notice that upstream still flags these tools as experimental software and
++ says that there is still a number of known bugs and issues. The
++ software is, however, in productive use at a number of sites and is
++ working reliably.
++ .
++ Homepage: http://linux-atm.sourceforge.net/
++
++Package: atm-tools-br2684
++Architecture: any
++Depends: ${shlibs:Depends}
++Description: br2864ctl - RFC1483/2864 Bridge Daemon for ATM Networks
++ br2684ctl handles RFC1483/2684 bridged PDUs. This is most often
++ used in ADSL scenarios where usually the subscribers' ethernet
++ traffic is encapsulated in ATM AAL5 (by bridging ADSL modems)
++ according to RFC2684
++ .
++ The sources for br2684ctl has been pulled from linux-atm's CVS
++ repository. Warning: This is unreleased software that can break any
++ time, any place. If it does, you get to keep the pieces. linux-atm's
++ upstream flags even the released software as experimental software.
++ There is still a number of known bugs and issues.
++
++Package: atm-dev
++Depends: libatm1-dev
++Architecture: all
++Section: oldlibs
++Description: Development files for compiling ATM programs (dummy package)
++ This dummy package provides a transition from the previous atm packages.
++ It is provided for backwards compatibility only and may be removedafter
++ the upgrade has completed or when when no other package depend on it.
++
++Package: libatm1
++Section: libs
++Architecture: any
++Depends: ${shlibs:Depends}
++Conflicts: atm-tools (<< 2.4.1-6)
++Description: shared library for ATM (Asynchronous Transfer Mode)
++ Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
++ .
++ Homepage: http://linux-atm.sourceforge.net/
++
++Package: libatm1-dev
++Section: libdevel
++Architecture: any
++Depends: libc6-dev, libatm1
++Replaces: atm-dev (<< 2.4.1-7)
++Conflicts: atm-dev (<< 2.4.1-7)
++Provides: libatm-dev
++Description: Development files for compiling ATM programs
++ Header files and development libraries for compiling ATM (Asynchronous
++ Transfer Mode) related programs.
++ .
++ Homepage: http://linux-atm.sourceforge.net/
+--- linux-atm-2.4.1.orig/debian/atm-tools.install
++++ linux-atm-2.4.1/debian/atm-tools.install
+@@ -0,0 +1,18 @@
++debian/tmp/usr/share/man/*
++debian/tmp/usr/bin/*
++debian/tmp/usr/sbin/atmsigd
++debian/tmp/usr/sbin/atmaddr
++debian/tmp/usr/sbin/esi
++debian/tmp/usr/sbin/atmloop
++debian/tmp/usr/sbin/atmtcp
++debian/tmp/usr/sbin/enitune
++debian/tmp/usr/sbin/zntune
++debian/tmp/usr/sbin/atmarp sbin
++debian/tmp/usr/sbin/atmarpd sbin
++debian/tmp/usr/sbin/ilmid
++debian/tmp/usr/sbin/zeppelin
++debian/tmp/usr/sbin/les
++debian/tmp/usr/sbin/bus
++debian/tmp/usr/sbin/lecs
++debian/tmp/usr/sbin/mpcd
++debian/tmp/etc/atmsigd.conf
+--- linux-atm-2.4.1.orig/debian/atm-tools.manpages
++++ linux-atm-2.4.1/debian/atm-tools.manpages
+@@ -0,0 +1 @@
++debian/atm-tools.8
+--- linux-atm-2.4.1.orig/debian/atm-tools.pod
++++ linux-atm-2.4.1/debian/atm-tools.pod
+@@ -0,0 +1,27 @@
++=head1 NAME
++
++linux-atm - preliminary manpage
++aread
++awrite
++enitune
++ilmid
++saaldump
++sonetdiag
++ttcp_atm
++zntune
++
++=head1 DOCUMENTATION
++
++atm-tools is a package containing the basic tools that are needed for
++setting up, monitoring, and tuning ATM networks. All available
++documentation can be found in /usr/share/doc/atnm-tools in Debian
++systems, and on the Web on: http://linux-atm.sourceforge.net.
++
++=head1 BUGS
++
++Many. Be prepared to debug.
++
++=head1 AUTHOR
++
++This manpage was written by Marc Haber for linux-atm packaging in
++Debian/GNU Operating System.
+--- linux-atm-2.4.1.orig/debian/changelog
++++ linux-atm-2.4.1/debian/changelog
+@@ -0,0 +1,212 @@
++linux-atm (2.4.1-17) unstable; urgency=low
++
++ * Fix build problem with gcc 4.0 (Closes: )
++
++ -- Peter De Schrijver (p2) <p2@mind.be> Thu, 17 Mar 2005 23:02:03 +0100
++
++linux-atm (2.4.1-16) unstable; urgency=low
++
++ * Fix build problem with gcc 3.4 (Closes: #259422)
++
++ -- Peter De Schrijver (p2) <p2@mind.be> Thu, 15 Jul 2004 14:28:10 +0200
++
++linux-atm (2.4.1-15) unstable; urgency=low
++
++ * Updated descriptions (Closes: #239161)
++
++ -- Peter De Schrijver (p2) <p2@mind.be> Sun, 4 Apr 2004 21:10:20 +0200
++
++linux-atm (2.4.1-14) unstable; urgency=low
++
++ * Fix symlink for /usr/lib/libatm.so (Closes: #221011)
++
++ -- Peter De Schrijver (p2) <p2@mind.be> Sun, 7 Dec 2003 21:53:19 +0100
++
++linux-atm (2.4.1-13) unstable; urgency=low
++
++ * Previous version fixed #217259, but no changelog entry (Closes: #217259)
++ * Previous version fixed #216662, but no changelog entry (Closes: #216662)
++ * Added missing build dependency on automake1.4 (Closes: #221120, #221284)
++ * New Maintainer (Closes: #206982)
++
++ -- Peter De Schrijver (p2) <p2@mind.be> Mon, 17 Nov 2003 23:03:58 +0100
++
++linux-atm (2.4.1-12) unstable; urgency=low
++
++ * don't build atm-tools-br2684 by default. Thanks to ftpmaster for
++ not allowing the package to be in Debian.
++ * Since we don't build atm-tools-br2684 any more, revert back to
++ autotools output from 2.4.1-9
++ * Add README.br2684 documenting a way to build the package locally.
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 5 Nov 2003 21:31:42 +0000
++
++linux-atm (2.4.1-11) experimental; urgency=low
++
++ * Build-Depend on dpatch
++ * dpatch br2684 header files from later libc for old libc (woody)
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 29 Oct 2003 19:05:07 +0000
++
++linux-atm (2.4.1-10) experimental; urgency=low
++
++ * add br2684 to package (closes: #216663)
++ * autoreconf to actually build br2684
++ * have libatm1-dev provide libatm-dev (closes: #216662)
++ * move lib symlink to libatm1-dev as well (closes: #217259)
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Thu, 23 Oct 2003 17:55:43 +0000
++
++linux-atm (2.4.1-9) unstable; urgency=low
++
++ * put libatm1-dev in libdevel (closes: #213170)
++ * make sure that new descriptions actually make it into the package
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Thu, 9 Oct 2003 17:08:10 +0000
++
++linux-atm (2.4.1-8) unstable; urgency=low
++
++ * build arch-indep package as targets of binary-indep (closes: #212124)
++ * use dh_installdocs to install files to libatm1-dev/docs
++ * symlink shared lib to usr/bin (closes: #213146)
++ * Use better long descriptions. Thanks to Javier (closes: #209427)
++ Fernandez-Sanguino (closes: #209612)
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Sun, 28 Sep 2003 19:29:08 +0000
++
++linux-atm (2.4.1-7) unstable; urgency=low
++
++ * libatm1 now conflicts with atm-tools (<< 2.4.1-6) (closes: #208170)
++ * armarp now writes output to stdout.
++ * add atm-dev as empty transitional package to help upgrades
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 2 Sep 2003 09:20:33 +0000
++
++linux-atm (2.4.1-6) unstable; urgency=low
++
++ * split off shared libraries to libatm1
++ * rename atm-dev to libatm1-dev
++ * Standards-Version: 3.6.1
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 26 Aug 2003 15:46:27 +0000
++
++linux-atm (2.4.1-5) unstable; urgency=low
++
++ * move *.a and *.la to usr/lib (closes: #199506).
++ * let atm-dev depend on atm-tools to avoid dangling /lib/libatm.so
++ symlink.
++ * Standards-Version: 3.5.6
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 30 Jul 2003 11:46:19 +0000
++
++linux-atm (2.4.1-4) unstable; urgency=low
++
++ * add Build-Depends: on automake1.4
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 11 Jun 2003 16:58:21 +0000
++
++linux-atm (2.4.1-3) unstable; urgency=low
++
++ * rebuilding libtool broke src/test/Makefile.in. Applied fix to
++ Makefile.am and re-built again.
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Wed, 11 Jun 2003 11:05:26 +0000
++
++linux-atm (2.4.1-2) unstable; urgency=low
++
++ * rebuild configure script with new libtool (closes: #196909)
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Tue, 10 Jun 2003 21:01:50 +0000
++
++linux-atm (2.4.1-1) unstable; urgency=low
++
++ * new upstream source
++ * remove atmarp and atmarpd from /usr/sbin as they are already in
++ /sbin (closes: #196216)
++ * lintian fixes
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Mon, 9 Jun 2003 16:03:45 +0000
++
++linux-atm (2.4.0-5) unstable; urgency=low
++
++ * Fix for src/test/Makefile.in to allow building on hppa and ia64
++ which the fix introduced to 2.4.0-4 broke. Thanks to Goswin
++ Brederlow.
++ * Move init.d priority to that atmarpd is started before network
++ interfaces are started.
++ * Move atmarpd and libatm to /sbin and /lib to allow atmarpd to be
++ started before /usr is mounted.
++ * use dh_install instead of dh_movefiles.
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Sat, 24 Aug 2002 15:13:48 +0000
++
++linux-atm (2.4.0-4) unstable; urgency=low
++
++ * new maintainer
++ * Fix for src/test/Makefile.in to allow building on sparc.
++ Thanks to Patrick Mauritz. (closes: #144225).
++ * added pseudo-manpage for manpage-less binaries.
++ * removed rpath by changing configure and make install paramaters
++
++ -- Marc Haber <mh+debian-packages@zugschlus.de> Fri, 16 Aug 2002 20:39:05 +0000
++
++linux-atm (2.4.0-3) unstable; urgency=HIGH
++
++ * Re-ran libtoolize.
++ Closes: #143522
++
++ * Previous version Closes: #135328
++
++ -- Russell Coker <russell@coker.com.au> Fri, 19 Apr 2002 01:55:00 +0200
++
++linux-atm (2.4.0-2) unstable; urgency=HIGH
++
++ * Put a "grep -v EMAXERRNO" into the build process to deal with mipsel and
++ the "#ifdef __KERNEL__" it has in it's /usr/include/asm/errno.h .
++
++ -- Russell Coker <russell@coker.com.au> Thu, 18 Apr 2002 19:56:00 +0200
++
++linux-atm (2.4.0-1) unstable; urgency=HIGH
++
++ * New upstream version which changes source package name.
++ Closes: #138911
++
++ -- Russell Coker <russell@coker.com.au> Mon, 18 Mar 2002 17:42:00 +0100
++
++atm (0.79-4) unstable; urgency=low
++
++ * Added build-depends on flex.
++ Closes: #111072
++
++ * Made the atm tools use a shared object to save space.
++
++ * Fixed the copyright file and put all copyright details in both packages.
++
++ * Added support for easy building with different kernel headers.
++ Closes: #110249
++
++ -- Russell Coker <russell@coker.com.au> Sun, 7 Oct 2001 14:11:33 +0200
++
++atm (0.79-3) unstable; urgency=low
++
++ * Created /etc/init.d/atm to start and stop atmarpd.
++ Closes: #110252
++
++ * Added build-depends on bison.
++ Closes: #110576
++
++ -- Russell Coker <russell@coker.com.au> Fri, 31 Aug 2001 15:21:44 +0200
++
++atm (0.79-2) unstable; urgency=low
++
++ * Changed the main package name to atm-tools to indicate that it doesn't
++ provide ATM (gotta have the kernel support), it just has the daemons and
++ utilities.
++
++ -- Russell Coker <russell@coker.com.au> Sat, 25 Aug 2001 17:55:00 +0200
++
++atm (0.79-1) unstable; urgency=low
++
++ * Initial Release.
++
++ -- Russell Coker <russell@coker.com.au> Fri, 24 Aug 2001 17:31:00 +0200
+--- linux-atm-2.4.1.orig/debian/checkout-br2684
++++ linux-atm-2.4.1/debian/checkout-br2684
+@@ -0,0 +1,25 @@
++#!/bin/bash -x
++
++set -e
++
++# check out br2684 from upstream CVS. We need to jump through hoops if
++# the local source package is under cvs control as well.
++
++CVSDIR=":pserver:anonymous:@cvs.linux-atm.sourceforge.net.:/cvsroot/linux-atm"
++DIR="br2684"
++TMPDIR="/tmp"
++TARGETDIR="src"
++
++cvs -d${CVSDIR} login
++
++mkdir -p $TMPDIR
++pushd $TMPDIR
++cvs -z6 -d${CVSDIR} export -d $DIR -r V2_5_0 linux-atm/src/br2684
++
++popd
++
++mv $TMPDIR/$DIR/* $TARGETDIR/$DIR
++rm -rf $TMPDIR/$DIR
++
++autoreconf -i -f
++
+--- linux-atm-2.4.1.orig/debian/copyright.header
++++ linux-atm-2.4.1/debian/copyright.header
+@@ -0,0 +1,18 @@
++This package was debianized by Russell Coker <russell@coker.com.au> on
++Fri, 24 Aug 2001 16:11:12 +0200 and is now maintained by Marc Haber
++<mh+debian-packages@zugschlus.de>.
++
++It was downloaded from http://www.sourceforge.net/projects/linux-atm/
++
++See also http://linux-atm.sourceforge.net/dist.php
++
++Upstream Authors:
++Werner Almesberger EPFL ICA <Werner.Almesberger@epfl.ch>
++Mitchell Blank Jr. <mitch@sfgoth.com>
++Paul B Schroeder <paulsch@us.ibm.com>
++
++Copyright:
++
++GPL 2.0
++
++See /usr/share/common-licenses/GPL-2
+--- linux-atm-2.4.1.orig/debian/libatm1-dev.dirs
++++ linux-atm-2.4.1/debian/libatm1-dev.dirs
+@@ -0,0 +1,2 @@
++usr/lib
++usr/include
+--- linux-atm-2.4.1.orig/debian/libatm1-dev.docs
++++ linux-atm-2.4.1/debian/libatm1-dev.docs
+@@ -0,0 +1,2 @@
++doc/README.CLP
++doc/atm-linux-howto.txt
+--- linux-atm-2.4.1.orig/debian/libatm1-dev.install
++++ linux-atm-2.4.1/debian/libatm1-dev.install
+@@ -0,0 +1,2 @@
++debian/tmp/usr/include/*
++debian/tmp/usr/lib/*.a usr/lib
+--- linux-atm-2.4.1.orig/debian/libatm1-dev.links
++++ linux-atm-2.4.1/debian/libatm1-dev.links
+@@ -0,0 +1 @@
++lib/libatm.so.1 usr/lib/libatm.so
+--- linux-atm-2.4.1.orig/debian/libatm1.dirs
++++ linux-atm-2.4.1/debian/libatm1.dirs
+@@ -0,0 +1 @@
++/lib
+--- linux-atm-2.4.1.orig/debian/libatm1.install
++++ linux-atm-2.4.1/debian/libatm1.install
+@@ -0,0 +1 @@
++debian/tmp/usr/lib/libatm.so.* lib
projects / openwrt.git / commitdiff