remove DIST and add EXTRAVERSION, discussed with mbm. fixed dirclean target for links...

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@279 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/openwrt/Makefile b/openwrt/Makefile
index 43ee3dd..172e1b8 100644 (file)
--- a/openwrt/Makefile
+++ b/openwrt/Makefile
@@ -128,11 +128,11 @@ source: $(TARGETS_SOURCE)
 #############################################################
 clean: 
        rm -rf $(TARGET_DIR) $(IMAGE).*
 #############################################################
 clean: 
        rm -rf $(TARGET_DIR) $(IMAGE).*

-       $(MAKE) $(DIST)-image-clean
+       $(MAKE) openwrt-image-clean

 
 dirclean: $(TARGETS_DIRCLEAN)
        rm -rf $(TARGET_DIR) $(IMAGE).*
 
 dirclean: $(TARGETS_DIRCLEAN)
        rm -rf $(TARGET_DIR) $(IMAGE).*

-       $(MAKE) $(DIST)-image-clean
+       $(MAKE) openwrt-image-dirclean

 
 distclean: clean
        rm -rf $(DL_DIR) $(BUILD_DIR) $(TOOL_BUILD_DIR) 
 
 distclean: clean
        rm -rf $(DL_DIR) $(BUILD_DIR) $(TOOL_BUILD_DIR) 

diff --git a/openwrt/package/config/mconf.c b/openwrt/package/config/mconf.c
index 0db6f8f..659e49c 100644 (file)
--- a/openwrt/package/config/mconf.c
+++ b/openwrt/package/config/mconf.c
@@ -705,6 +705,7 @@ int main(int ac, char **av)
                conf_write(NULL);
                printf("\n\n"
                        "*** End of Buildroot configuration.\n"
                conf_write(NULL);
                printf("\n\n"
                        "*** End of Buildroot configuration.\n"

+                       "*** After changing root fs, use make linux-dirclean.\n"

                        "*** Check the top-level Makefile for additional configuration options.\n\n");
        } else
                printf("\n\nYour Buildroot configuration changes were NOT saved.\n\n");
                        "*** Check the top-level Makefile for additional configuration options.\n\n");
        } else
                printf("\n\nYour Buildroot configuration changes were NOT saved.\n\n");

diff --git a/openwrt/package/openwrt/openwrt.mk b/openwrt/package/openwrt/openwrt.mk
index dcd1856..5c3f6b1 100644 (file)
--- a/openwrt/package/openwrt/openwrt.mk
+++ b/openwrt/package/openwrt/openwrt.mk
@@ -62,7 +62,7 @@ linksys-nvram-clean:
        -$(MAKE) -C $(LINKSYS_NVRAM_BUILD_DIR) clean
 
 linksys-nvram-dirclean:
        -$(MAKE) -C $(LINKSYS_NVRAM_BUILD_DIR) clean
 
 linksys-nvram-dirclean:

-       rm -rf $(LINKSYS_NVRAM_BUILD_DIR)
+       rm -rf $(LINKSYS_NVRAM_DIR)

 
 # wlconf tool extracted from linksys firmware GPL sourcetree
 # WRT54GS_3_37_2_1109_US
 
 # wlconf tool extracted from linksys firmware GPL sourcetree
 # WRT54GS_3_37_2_1109_US


@@ -94,7 +94,7 @@ linksys-wlconf-clean:
        -$(MAKE) -C $(LINKSYS_WLCONF_BUILD_DIR) clean
 
 linksys-wlconf-dirclean:
        -$(MAKE) -C $(LINKSYS_WLCONF_BUILD_DIR) clean
 
 linksys-wlconf-dirclean:

-       rm -rf $(LINKSYS_WLCONF_BUILD_DIR)
+       rm -rf $(LINKSYS_WLCONF_DIR)

 
 # mtd tool
 OPENWRT_MTD_SOURCE=package/openwrt/mtd.c
 
 # mtd tool
 OPENWRT_MTD_SOURCE=package/openwrt/mtd.c


@@ -144,5 +144,9 @@ openwrt-addpattern: $(OPENWRT_ADDPATTERN_TARGET)
 openwrt-addpattern-clean: 
        rm $(OPENWRT_ADDPATTERN_TARGET)
 
 openwrt-addpattern-clean: 
        rm $(OPENWRT_ADDPATTERN_TARGET)
 

-openwrt:       linksys-shared linksys-nvram linksys-wlconf openwrt-mtd openwrt-trx openwrt-addpattern
+linksys:       linksys-shared linksys-nvram linksys-wlconf
+
+openwrt:       linksys openwrt-mtd openwrt-trx openwrt-addpattern openwrt-jffs2root
+
+openwrt-dirclean: linksys-shared-dirclean linksys-nvram-dirclean linksys-wlconf-dirclean

 
 

diff --git a/openwrt/target/Makefile.in b/openwrt/target/Makefile.in
index 7a212e4..15cf6bd 100644 (file)
--- a/openwrt/target/Makefile.in
+++ b/openwrt/target/Makefile.in
@@ -1,5 +1,5 @@
 # Default target skeleton stuff, may be overridden
 # Default target skeleton stuff, may be overridden

-DIST=openwrt
+EXTRAVERSION=

 TARGET_SKELETON=target/default/skel.tar.gz
 TARGET_SKEL_DIR=target/default/target_skeleton
 
 TARGET_SKELETON=target/default/skel.tar.gz
 TARGET_SKEL_DIR=target/default/target_skeleton
 


@@ -10,16 +10,20 @@ JFFS2FLAGS+=-a 131072
 endif
 
 
 endif
 
 

-$(DIST)-linux.trx: openwrt-trx
-       PATH=$(TARGET_PATH) trx -o $(DIST)-linux.trx $(LINUX_DIR)/$(LINUX_BINLOC) $(JFFS2FLAGS) $(IMAGE).$(ROOTFS)
+openwrt-linux.trx: openwrt-trx
+       PATH=$(TARGET_PATH) trx -o openwrt-linux$(EXTRAVERSION).trx \
+        $(LINUX_DIR)/$(LINUX_BINLOC) $(JFFS2FLAGS) $(IMAGE).$(ROOTFS)

 
 

-$(DIST)-gs-code.bin: openwrt-addpattern $(DIST)-linux.trx
-       PATH=$(TARGET_PATH) addpattern -2 -i  $(DIST)-linux.trx -o $(DIST)-gs-code.bin -g
+openwrt-gs-code.bin: openwrt-addpattern openwrt-linux.trx
+       PATH=$(TARGET_PATH) addpattern -2 -i  openwrt-linux$(EXTRAVERSION).trx \
+       -o openwrt-gs-code$(EXTRAVERSION).bin -g

 
 

-$(DIST)-g-code.bin: $(DIST)-gs-code.bin
-       sed -e "1s,^W54S,W54G," < $(DIST)-gs-code.bin > $(DIST)-g-code.bin
+openwrt-g-code.bin: openwrt-gs-code.bin
+       sed -e "1s,^W54S,W54G," < openwrt-gs-code$(EXTRAVERSION).bin > openwrt-g-code$(EXTRAVERSION).bin

 
 

-openwrt-image: openwrt $(DIST)-g-code.bin
+openwrt-image: openwrt openwrt-g-code.bin

 
 

-$(DIST)-image-clean:
-       @-rm $(DIST)-* 2>/dev/null
+openwrt-image-clean: 
+       @-rm openwrt-* 2>/dev/null
+
+openwrt-image-dirclean: openwrt-dirclean