+diff -Nur linux-2.6.16/Documentation/networking/bcm43xx-d80211-HOWTO.txt linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211-HOWTO.txt
+--- linux-2.6.16/Documentation/networking/bcm43xx-d80211-HOWTO.txt 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211-HOWTO.txt 2006-03-28 22:16:14.000000000 +0200
+@@ -0,0 +1,67 @@
++**** ****
++**** HOWTO get bcm43xx-dscape running ****
++**** ****
++
++This is a port of the bcm43xx driver for the devicescape ieee802.11
++stack. The devicescape ieee802.11 stack is an advanced out-of-mainline
++802.11 protocol module.
++I will call the "devicescape ieee802.11 stack" simply "dscape" in the
++following text.
++
++
++*** Setting up the bcm43xx driver with dscape is currently non-trivial,
++*** as several modifications to the kernel and the userland
++*** wpa_supplicant tool are required. We are working on it...
++
++
++1) You need to patch the kernel with the ieee80211-devicescape stack
++ and the bcm43xx-dscape port.
++ Both are available in one cummulative at:
++ ftp://ftp.bu3sch.de/bcm43xx-snapshots/all-in-one/bcm43xx-dscape/
++ Read the instructions on http://bcm43xx.berlios.de/ for how to apply
++ this patch.
++
++ Patch the kernel, compile and install it.
++ When configuring, enable
++ "Networking/Generic IEEE 802.11 Networking Stack (dscape)"
++ and
++ "Device Drivers/Network device support/Wireless LAN (non-hamradio)/Broadcom BCM43xx wireless support (DeviceScape stack)"
++ Reboot.
++
++2) Set up a wpa_supplicant config file in /etc/wpa_supplicant.conf
++ Here is an example for an AES WPA encrypted network:
++
++ # WPA AES encryption
++ ctrl_interface=/var/run/wpa_supplicant
++ network={
++ ssid="ACCESSPOINT_SSID"
++ key_mgmt=WPA-PSK
++ proto=WPA
++ pairwise=CCMP TKIP
++ group=CCMP TKIP
++ psk="MY PASSPHRASE"
++ priority=3
++ }
++
++3) Take a bottle of your favourite beer, open it and take a swallow.
++
++4) Now it's time to bring the driver up.
++ Do modprobe bcm43xx-d80211 to load the driver.
++ There is an ugly bash script to bring the driver up after insmod.
++ It is found in the "scripts" subdirectory of the patched kernel
++ tree and is called "bcm43xx-d80211-sta_up.sh".
++ Call scripts/bcm43xx-d80211-sta_up.sh --help to get some usage information.
++ It may suffice to call scripts/bcm43xx-d80211-sta_up.sh without any parameters. See
++ the help. Default parameters, which are used when called without parameters,
++ are explained there.
++
++5) If you want to access the internet, make sure your default route
++ is correctly set up with your gateway's IP:
++ route add default gw 192.168.xxx.xxx
++
++6) Take another swallow from your bottle of beer and test if it works:
++ ping www.kernel.org
++
++7) If it works, drink the rest of your beer. Otherwise read this HOWTO again,
++ and again and again. Complain to bcm43xx-dev@lists.berlios.de, if it still
++ does not work.
+diff -Nur linux-2.6.16/Documentation/networking/bcm43xx-d80211.txt linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211.txt
+--- linux-2.6.16/Documentation/networking/bcm43xx-d80211.txt 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.16-bcm43xx/Documentation/networking/bcm43xx-d80211.txt 2006-03-28 22:16:14.000000000 +0200
+@@ -0,0 +1,31 @@
++
++ BCM43xx Linux Driver Project
++ ============================
++
++About this software
++-------------------
++
++The goal of this project is to develop a linux driver for Broadcom
++BCM43xx chips, based on the specification at
++http://bcm-specs.sipsolutions.net/
++
++The project page is http://bcm43xx.berlios.de/
++
++This is a port of the bcm43xx driver for the devicescape ieee802.11
++stack.
++
++Requirements
++------------
++
++1) Linux Kernel 2.6.16 or later
++ http://www.kernel.org/
++
++ See Documentation/networking/bcm43xx-d80211-HOWTO.txt for further
++ instructions.
++
++2) Firmware Files
++
++ Please try bcm43xx-fwcutter. It can extract the firmware from various
++ binary driver files and supports driver files from Windows, MacOS and
++ Linux. You can get bcm43xx-fwcutter from http://bcm43xx.berlios.de/.
++ Also, bcm43xx-fwcutter comes with a README file for further instructions.