generic: ar8216: add a helper function for writing PHY debug registers

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30884 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index c199ac1..7dd3282 100644 (file)
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -118,6 +118,18 @@ ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
        mutex_unlock(&bus->mdio_lock);
 }
 
+static void
+ar8216_phy_dbg_write(struct ar8216_priv *priv, int phy_addr,
+                    u16 dbg_addr, u16 dbg_data)
+{
+       struct mii_bus *bus = priv->phy->bus;
+
+       mutex_lock(&bus->mdio_lock);
+       bus->write(bus, phy_addr, MII_ATH_DBG_ADDR, dbg_addr);
+       bus->write(bus, phy_addr, MII_ATH_DBG_DATA, dbg_data);
+       mutex_unlock(&bus->mdio_lock);
+}
+
 static u32
 ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
 {
@@ -719,14 +731,11 @@ ar8316_hw_init(struct ar8216_priv *priv)
                if ((i == 4) && priv->port4_phy &&
                    priv->phy->interface == PHY_INTERFACE_MODE_RGMII) {
                        /* work around for phy4 rgmii mode */
-                       mdiobus_write(bus, i, MII_ATH_DBG_ADDR, 0x12);
-                       mdiobus_write(bus, i, MII_ATH_DBG_DATA, 0x480c);
+                       ar8216_phy_dbg_write(priv, i, 0x12, 0x480c);
                        /* rx delay */
-                       mdiobus_write(bus, i, MII_ATH_DBG_ADDR, 0x0);
-                       mdiobus_write(bus, i, MII_ATH_DBG_DATA, 0x824e);
+                       ar8216_phy_dbg_write(priv, i, 0x0, 0x824e);
                        /* tx delay */
-                       mdiobus_write(bus, i, MII_ATH_DBG_ADDR, 0x5);
-                       mdiobus_write(bus, i, MII_ATH_DBG_DATA, 0x3d47);
+                       ar8216_phy_dbg_write(priv, i, 0x5, 0x3d47);
                        msleep(1000);
                }