include $(TOPDIR)/rules.mk
-include ./openwrt.mk
+SHARED_INCLUDE:=${shell pwd}/include
-source: openwrt-source
-prepare: $(LINKSYS_SHARED_DIR)/.source
-compile: $(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY)
-install: compile openwrt
-clean: openwrt-dirclean
+libshared-compile libnvram-compile:
+ @$(MAKE) -C $(patsubst %-compile,%,$@) compile
+
+libshared-install libnvram-install:
+ @$(MAKE) -C $(patsubst %-install,%,$@) install
+
+libshared-clean libnvram-clean:
+ @$(MAKE) -C $(patsubst %-clean,%,$@) clean
+
+$(TARGET_DIR)/sbin/mtd: mtd.c
+ $(TARGET_CC) -o $@ $<
+ $(STRIP) $@
+
+$(TARGET_DIR)/sbin/jffs2root: jffs2root.c
+ $(TARGET_CC) -o $@ $<
+ $(STRIP) $@
+
+# wlconf tool extracted from linksys firmware GPL.unpackedtree
+# WRT54GS_3_37_2_1109_US
+LINKSYS_TGZ_SITE=http://openwrt.openbsd-geek.de
+LINKSYS_WLCONF_TGZ=linksys-wlconf.tar.gz
+LINKSYS_WLCONF_DIR=$(BUILD_DIR)/linksys-wlconf
+LINKSYS_WLCONF_TARGET_BINARY:=usr/sbin/wlconf
+
+$(DL_DIR)/$(LINKSYS_WLCONF_TGZ):
+ $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_WLCONF_TGZ)
+
+$(LINKSYS_WLCONF_DIR)/.unpacked: $(DL_DIR)/$(LINKSYS_WLCONF_TGZ)
+ zcat $(DL_DIR)/$(LINKSYS_WLCONF_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
+ touch $(LINKSYS_WLCONF_DIR)/.unpacked
+
+$(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY): $(LINKSYS_WLCONF_DIR)/.unpacked
+ $(MAKE) -C $(LINKSYS_WLCONF_DIR) INSTALLDIR=$(TARGET_DIR) \
+ CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
+ CFLAGS="$(TARGET_CFLAGS) -I. -I$(SHARED_INCLUDE) \
+ -Wall -DOPENWRT_WLCONF" \
+ LDFLAGS="-lnvram -lshared" \
+ install
+ $(STRIP) $@
+
+
+source:
+prepare:
+compile: libnvram-compile libshared-compile
+install: libnvram-install libshared-install $(TARGET_DIR)/sbin/mtd $(TARGET_DIR)/sbin/jffs2root $(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY)
+clean: libnvram-clean libshared-clean
+ rm -rf $(LINKSYS_WLCONF_DIR)
+ rm -f $(TARGET_DIR)/sbin/mtd
+ rm -f $(TARGET_DIR)/sbin/jffs2root
--- /dev/null
+/*
+ * NVRAM variable manipulation
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _bcmnvram_h_
+#define _bcmnvram_h_
+
+#ifndef _LANGUAGE_ASSEMBLY
+
+#include <typedefs.h>
+
+struct nvram_header {
+ uint32 magic;
+ uint32 len;
+ uint32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */
+ uint32 config_refresh; /* 0:15 config, 16:31 refresh */
+ uint32 config_ncdl; /* ncdl values for memc */
+};
+
+struct nvram_tuple {
+ char *name;
+ char *value;
+ struct nvram_tuple *next;
+};
+
+/*
+ * Initialize NVRAM access. May be unnecessary or undefined on certain
+ * platforms.
+ */
+extern int nvram_init(void *sbh);
+
+/*
+ * Disable NVRAM access. May be unnecessary or undefined on certain
+ * platforms.
+ */
+extern void nvram_exit(void);
+
+/*
+ * Get the value of an NVRAM variable. The pointer returned may be
+ * invalid after a set.
+ * @param name name of variable to get
+ * @return value of variable or NULL if undefined
+ */
+extern char * nvram_get(const char *name);
+
+/*
+ * Get the value of an NVRAM variable.
+ * @param name name of variable to get
+ * @return value of variable or NUL if undefined
+ */
+#define nvram_safe_get(name) (nvram_get(name) ? : "")
+
+#define nvram_safe_unset(name) ({ \
+ if(nvram_get(name)) \
+ nvram_unset(name); \
+})
+
+#define nvram_safe_set(name, value) ({ \
+ if(!nvram_get(name) || strcmp(nvram_get(name), value)) \
+ nvram_set(name, value); \
+})
+
+/*
+ * Match an NVRAM variable.
+ * @param name name of variable to match
+ * @param match value to compare against value of variable
+ * @return TRUE if variable is defined and its value is string equal
+ * to match or FALSE otherwise
+ */
+static INLINE int
+nvram_match(char *name, char *match) {
+ const char *value = nvram_get(name);
+ return (value && !strcmp(value, match));
+}
+
+/*
+ * Inversely match an NVRAM variable.
+ * @param name name of variable to match
+ * @param match value to compare against value of variable
+ * @return TRUE if variable is defined and its value is not string
+ * equal to invmatch or FALSE otherwise
+ */
+static INLINE int
+nvram_invmatch(char *name, char *invmatch) {
+ const char *value = nvram_get(name);
+ return (value && strcmp(value, invmatch));
+}
+
+/*
+ * Set the value of an NVRAM variable. The name and value strings are
+ * copied into private storage. Pointers to previously set values
+ * may become invalid. The new value may be immediately
+ * retrieved but will not be permanently stored until a commit.
+ * @param name name of variable to set
+ * @param value value of variable
+ * @return 0 on success and errno on failure
+ */
+extern int nvram_set(const char *name, const char *value);
+
+/*
+ * Unset an NVRAM variable. Pointers to previously set values
+ * remain valid until a set.
+ * @param name name of variable to unset
+ * @return 0 on success and errno on failure
+ * NOTE: use nvram_commit to commit this change to flash.
+ */
+extern int nvram_unset(const char *name);
+
+/*
+ * Commit NVRAM variables to permanent storage. All pointers to values
+ * may be invalid after a commit.
+ * NVRAM values are undefined after a commit.
+ * @return 0 on success and errno on failure
+ */
+extern int nvram_commit(void);
+
+/*
+ * Get all NVRAM variables (format name=value\0 ... \0\0).
+ * @param buf buffer to store variables
+ * @param count size of buffer in bytes
+ * @return 0 on success and errno on failure
+ */
+extern int nvram_getall(char *buf, int count);
+
+extern int file2nvram(char *filename, char *varname);
+extern int nvram2file(char *varname, char *filename);
+
+#endif /* _LANGUAGE_ASSEMBLY */
+
+#define NVRAM_MAGIC 0x48534C46 /* 'FLSH' */
+#define NVRAM_VERSION 1
+#define NVRAM_HEADER_SIZE 20
+#define NVRAM_SPACE 0x8000
+#define FLASH_BASE 0xbfc00000 /* Extif core */
+#define FLASH_MIN 0x00100000 /* Minimum flash size */
+#define FLASH_MAX 0x00400000 /* Maximum flash size with extif */
+
+#endif /* _bcmnvram_h_ */
--- /dev/null
+/*
+ * Misc useful os-independent macros and functions.
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
+ */
+
+#ifndef _bcmutils_h_
+#define _bcmutils_h_
+
+#ifndef MIN
+#define MIN(a, b) (((a)<(b))?(a):(b))
+#endif
+
+#ifndef MAX
+#define MAX(a, b) (((a)>(b))?(a):(b))
+#endif
+
+#define CEIL(x, y) (((x) + ((y)-1)) / (y))
+#define ROUNDUP(x, y) ((((ulong)(x)+((y)-1))/(y))*(y))
+#define ISALIGNED(a, x) (((uint)(a) & ((x)-1)) == 0)
+#define ISPOWEROF2(x) ((((x)-1)&(x))==0)
+#define OFFSETOF(type, member) ((uint) &((type *)0)->member)
+#define ARRAYSIZE(a) (sizeof(a)/sizeof(a[0]))
+
+/* bit map related macros */
+#ifndef setbit
+#define NBBY 8 /* 8 bits per byte */
+#define setbit(a,i) ((a)[(i)/NBBY] |= 1<<((i)%NBBY))
+#define clrbit(a,i) ((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
+#define isset(a,i) ((a)[(i)/NBBY] & (1<<((i)%NBBY)))
+#define isclr(a,i) (((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
+#endif
+
+#define NBITS(type) (sizeof (type) * 8)
+
+#define _BCM_U 0x01 /* upper */
+#define _BCM_L 0x02 /* lower */
+#define _BCM_D 0x04 /* digit */
+#define _BCM_C 0x08 /* cntrl */
+#define _BCM_P 0x10 /* punct */
+#define _BCM_S 0x20 /* white space (space/lf/tab) */
+#define _BCM_X 0x40 /* hex digit */
+#define _BCM_SP 0x80 /* hard space (0x20) */
+
+extern unsigned char bcm_ctype[];
+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
+
+#define bcm_isalnum(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
+#define bcm_isalpha(c) ((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
+#define bcm_iscntrl(c) ((bcm_ismask(c)&(_BCM_C)) != 0)
+#define bcm_isdigit(c) ((bcm_ismask(c)&(_BCM_D)) != 0)
+#define bcm_isgraph(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
+#define bcm_islower(c) ((bcm_ismask(c)&(_BCM_L)) != 0)
+#define bcm_isprint(c) ((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
+#define bcm_ispunct(c) ((bcm_ismask(c)&(_BCM_P)) != 0)
+#define bcm_isspace(c) ((bcm_ismask(c)&(_BCM_S)) != 0)
+#define bcm_isupper(c) ((bcm_ismask(c)&(_BCM_U)) != 0)
+#define bcm_isxdigit(c) ((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
+
+/*
+ * Spin at most 'us' microseconds while 'exp' is true.
+ * Caller should explicitly test 'exp' when this completes
+ * and take appropriate error action if 'exp' is still true.
+ */
+#define SPINWAIT(exp, us) { \
+ uint countdown = (us) + 9; \
+ while ((exp) && (countdown >= 10)) {\
+ OSL_DELAY(10); \
+ countdown -= 10; \
+ } \
+}
+
+/* generic osl packet queue */
+struct pktq {
+ void *head; /* first packet to dequeue */
+ void *tail; /* last packet to dequeue */
+ uint len; /* number of queued packets */
+ uint maxlen; /* maximum number of queued packets */
+ bool priority; /* enqueue by packet priority */
+};
+#define DEFAULT_QLEN 128
+
+#define pktq_len(q) ((q)->len)
+#define pktq_avail(q) ((q)->maxlen - (q)->len)
+#define pktq_head(q) ((q)->head)
+#define pktq_full(q) ((q)->len >= (q)->maxlen)
+
+/* crc defines */
+#define CRC8_INIT_VALUE 0xff /* Initial CRC8 checksum value */
+#define CRC8_GOOD_VALUE 0x9f /* Good final CRC8 checksum value */
+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */
+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
+
+/* tag_ID/length/value_buffer tuple */
+typedef struct bcm_tlv {
+ uint8 id;
+ uint8 len;
+ uint8 data[1];
+} bcm_tlv_t;
+
+/* Check that bcm_tlv_t fits into the given buflen */
+#define bcm_valid_tlv(elt, buflen) ((buflen) >= 2 && (buflen) >= 2 + (elt)->len)
+
+/* buffer length for ethernet address from bcm_ether_ntoa() */
+#define ETHER_ADDR_STR_LEN 18
+
+/*
+* load 32-bit value from unaligned byte array
+*/
+#ifdef IL_BIGENDIAN
+#define load32_ua(a) ((((uint8 *)(a))[0] << 24) + (((uint8 *)(a))[1] << 16) + \
+ (((uint8 *)(a))[2] << 8) + ((uint8 *)(a))[3])
+#else
+#define load32_ua(a) ((((uint8 *)(a))[3] << 24) + (((uint8 *)(a))[2] << 16) + \
+ (((uint8 *)(a))[1] << 8) + ((uint8 *)(a))[0])
+#endif
+
+/* externs */
+extern uint bcm_atoi(char *s);
+extern uchar bcm_toupper(uchar c);
+extern ulong bcm_strtoul(char *cp, char **endp, uint base);
+extern void deadbeef(char *p, uint len);
+extern void prhex(char *msg, uchar *buf, uint len);
+extern void prpkt(char *msg, void *drv, void *p0);
+extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf);
+extern uint pkttotlen(void *drv, void *);
+extern uchar *bcm_ether_ntoa(char *ea, char *buf);
+extern int bcm_ether_atoe(char *p, char *ea);
+extern void bcm_mdelay(uint ms);
+extern char *getvar(char *vars, char *name);
+extern int getintvar(char *vars, char *name);
+extern char *bcmstrstr(char *haystack, char *needle);
+
+extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc);
+extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc);
+extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc);
+extern bcm_tlv_t *bcm_next_tlv(bcm_tlv_t *elt, int *buflen);
+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
+extern void pktq_init(struct pktq *q, uint maxlen, bool priority);
+extern bool pktenq(struct pktq *q, void *p, bool lifo);
+extern void *pktdeq(struct pktq *q);
+
+#define bcmlog(fmt, a1, a2)
+#define bcmdumplog(buf, size) *buf = '\0'
+#define bcmdumplogent(buf, idx) -1
+
+#endif /* _bcmutils_h_ */
--- /dev/null
+
+#define DNSMASQ_SUPPORT 1
+#define CONFIG_DNSMASQ y
+#define UDHCPD_SUPPORT 1
+#define CONFIG_UDHCPD y
+#define UDHCPC_SUPPORT 1
+#define CONFIG_UDHCPC y
+#define PPPOE_SUPPORT 1
+#define CONFIG_PPPOE y
+#define PPTP_SUPPORT 1
+#define CONFIG_PPTP y
+#define L2TP_SUPPORT 1
+#define CONFIG_L2TP y
+#define PPPD_SUPPORT 1
+#define CONFIG_PPPD y
+#define ZEBRA_SUPPORT 1
+#define CONFIG_ZEBRA y
+#define TFTPD_SUPPORT 1
+#define CONFIG_TFTPD y
+#define DDNS_SUPPORT 1
+#define CONFIG_DDNS y
+#define CRON_SUPPORT 1
+#define CONFIG_CRON y
+#define HTTPD_SUPPORT 1
+#define CONFIG_HTTPD y
+#define GET_POST_SUPPORT 1
+#define CONFIG_GET_POST y
+
+#if 1
+#define HEARTBEAT_SUPPORT 1
+#define CONFIG_HEARTBEAT y
+#define MULTICAST_SUPPORT 1
+#define CONFIG_MULTICAST y
+#define SETUP_WIZARD_SUPPORT 1
+#define CONFIG_SETUP_WIZARD y
+#define PARENTAL_CONTROL_SUPPORT 1
+#define CONFIG_PARENTAL_CONTROL y
+#define HTTPS_SUPPORT 1
+#define CONFIG_HTTPS y
+#define EOU_SUPPORT 1
+#define CONFIG_EOU y
+#define EZC_SUPPORT 1
+#define CONFIG_EZC y
+#define WRITE_MAC_SUPPORT 1
+#define CONFIG_WRITE_MAC y
+#define DIAG_SUPPORT 1
+#define CONFIG_DIAG y
+#endif
+
+#define SPEED_BOOSTER_SUPPORT 1
+#define CONFIG_SPEED_BOOSTER y
+#define XBOX_SUPPORT 1
+#define CONFIG_XBOX y
+
+#if 0
+#define MPPPOE_SUPPORT 1
+#define CONFIG_MPPPOE y
+#define UNNUMBERIP_SUPPORT 1
+#define CONFIG_UNNUMBERIP y
+#endif
+
+#define WL_STA_SUPPORT 1
+#define CONFIG_WL_STA y
+#define BACKUP_RESTORE_SUPPORT 1
+#define CONFIG_BACKUP_RESTORE y
+#define PORT_TRIGGER_SUPPORT 1
+#define CONFIG_PORT_TRIGGER y
+#define HW_QOS_SUPPORT 1
+#define CONFIG_HW_QOS y
--- /dev/null
+/*
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ *
+*/
+
+#ifndef _epivers_h_
+#define _epivers_h_
+
+#ifdef linux
+#include <linux/config.h>
+#endif
+
+/* Vendor Name, ASCII, 32 chars max */
+#ifdef COMPANYNAME
+#define HPNA_VENDOR COMPANYNAME
+#else
+#define HPNA_VENDOR "Broadcom Corporation"
+#endif
+
+/* Driver Date, ASCII, 32 chars max */
+#define HPNA_DRV_BUILD_DATE __DATE__
+
+/* Hardware Manufacture Date, ASCII, 32 chars max */
+#define HPNA_HW_MFG_DATE "Not Specified"
+
+/* See documentation for Device Type values, 32 values max */
+#ifndef HPNA_DEV_TYPE
+
+#if defined(CONFIG_BRCM_VJ)
+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_DISPLAY }
+
+#elif defined(CONFIG_BCRM_93725)
+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
+
+#else
+#define HPNA_DEV_TYPE { CDCF_V0_DEVICE_PCINIC }
+
+#endif
+
+#endif /* !HPNA_DEV_TYPE */
+
+
+#define EPI_MAJOR_VERSION 3
+
+#define EPI_MINOR_VERSION 60
+
+#define EPI_RC_NUMBER 13
+
+#define EPI_INCREMENTAL_NUMBER 0
+
+#define EPI_BUILD_NUMBER 0
+
+#define EPI_VERSION 3,60,13,0
+
+#define EPI_VERSION_NUM 0x033c0d00
+
+/* Driver Version String, ASCII, 32 chars max */
+#define EPI_VERSION_STR "3.60.13.0"
+#define EPI_ROUTER_VERSION_STR "3.61.13.0"
+
+#endif /* _epivers_h_ */
--- /dev/null
+/*
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Fundamental types and constants relating to 802.11
+ *
+ * $Id$
+ */
+
+#ifndef _802_11_H_
+#define _802_11_H_
+
+#ifndef _TYPEDEFS_H_
+#include <typedefs.h>
+#endif
+
+#ifndef _NET_ETHERNET_H_
+#include <proto/ethernet.h>
+#endif
+
+/* enable structure packing */
+#if !defined(__GNUC__)
+#pragma pack(1)
+#endif
+
+/* some platforms require stronger medicine */
+#if defined(__GNUC__)
+#define PACKED __attribute__((packed))
+#else
+#define PACKED
+#endif
+
+
+#define DOT11_TU_TO_US 1024 /* 802.11 Time Unit is 1024 microseconds */
+
+/* Generic 802.11 frame constants */
+#define DOT11_A3_HDR_LEN 24
+#define DOT11_A4_HDR_LEN 30
+#define DOT11_MAC_HDR_LEN DOT11_A3_HDR_LEN
+#define DOT11_FCS_LEN 4
+#define DOT11_ICV_LEN 4
+#define DOT11_ICV_AES_LEN 8
+#define DOT11_QOS_LEN 2
+
+#define DOT11_KEY_INDEX_SHIFT 6
+#define DOT11_IV_LEN 4
+#define DOT11_IV_TKIP_LEN 8
+#define DOT11_IV_AES_OCB_LEN 4
+#define DOT11_IV_AES_CCM_LEN 8
+
+/* Includes MIC */
+#define DOT11_MAX_MPDU_BODY_LEN 2304
+/* A4 header + QoS + CCMP + PDU + ICV + FCS = 2352 */
+#define DOT11_MAX_MPDU_LEN (DOT11_A4_HDR_LEN + \
+ DOT11_QOS_LEN + \
+ DOT11_IV_AES_CCM_LEN + \
+ DOT11_MAX_MPDU_BODY_LEN + \
+ DOT11_ICV_LEN + \
+ DOT11_FCS_LEN)
+
+#define DOT11_MAX_SSID_LEN 32
+
+/* dot11RTSThreshold */
+#define DOT11_DEFAULT_RTS_LEN 2347
+#define DOT11_MAX_RTS_LEN 2347
+
+/* dot11FragmentationThreshold */
+#define DOT11_MIN_FRAG_LEN 256
+#define DOT11_MAX_FRAG_LEN 2346 /* Max frag is also limited by aMPDUMaxLength of the attached PHY */
+#define DOT11_DEFAULT_FRAG_LEN 2346
+
+/* dot11BeaconPeriod */
+#define DOT11_MIN_BEACON_PERIOD 1
+#define DOT11_MAX_BEACON_PERIOD 0xFFFF
+
+/* dot11DTIMPeriod */
+#define DOT11_MIN_DTIM_PERIOD 1
+#define DOT11_MAX_DTIM_PERIOD 0xFF
+
+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
+#define DOT11_LLC_SNAP_HDR_LEN 8
+#define DOT11_OUI_LEN 3
+struct dot11_llc_snap_header {
+ uint8 dsap; /* always 0xAA */
+ uint8 ssap; /* always 0xAA */
+ uint8 ctl; /* always 0x03 */
+ uint8 oui[DOT11_OUI_LEN]; /* RFC1042: 0x00 0x00 0x00
+ Bridge-Tunnel: 0x00 0x00 0xF8 */
+ uint16 type; /* ethertype */
+} PACKED;
+
+/* RFC1042 header used by 802.11 per 802.1H */
+#define RFC1042_HDR_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
+
+/* Generic 802.11 MAC header */
+/*
+ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
+ * The fields are defined such that the shorter 1, 2, and 3
+ * address headers just use the first k fields.
+ */
+struct dot11_header {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr a1; /* address 1 */
+ struct ether_addr a2; /* address 2 */
+ struct ether_addr a3; /* address 3 */
+ uint16 seq; /* sequence control */
+ struct ether_addr a4; /* address 4 */
+} PACKED;
+
+/* Control frames */
+
+struct dot11_rts_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+ struct ether_addr ta; /* transmitter address */
+} PACKED;
+#define DOT11_RTS_LEN 16
+
+struct dot11_cts_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+} PACKED;
+#define DOT11_CTS_LEN 10
+
+struct dot11_ack_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+} PACKED;
+#define DOT11_ACK_LEN 10
+
+struct dot11_ps_poll_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* AID */
+ struct ether_addr bssid; /* receiver address, STA in AP */
+ struct ether_addr ta; /* transmitter address */
+} PACKED;
+#define DOT11_PS_POLL_LEN 16
+
+struct dot11_cf_end_frame {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr ra; /* receiver address */
+ struct ether_addr bssid; /* transmitter address, STA in AP */
+} PACKED;
+#define DOT11_CS_END_LEN 16
+
+/* Management frame header */
+struct dot11_management_header {
+ uint16 fc; /* frame control */
+ uint16 durid; /* duration/ID */
+ struct ether_addr da; /* receiver address */
+ struct ether_addr sa; /* transmitter address */
+ struct ether_addr bssid; /* BSS ID */
+ uint16 seq; /* sequence control */
+} PACKED;
+#define DOT11_MGMT_HDR_LEN 24
+
+/* Management frame payloads */
+
+struct dot11_bcn_prb {
+ uint32 timestamp[2];
+ uint16 beacon_interval;
+ uint16 capability;
+} PACKED;
+#define DOT11_BCN_PRB_LEN 12
+
+struct dot11_auth {
+ uint16 alg; /* algorithm */
+ uint16 seq; /* sequence control */
+ uint16 status; /* status code */
+} PACKED;
+#define DOT11_AUTH_FIXED_LEN 6 /* length of auth frame without challenge info elt */
+
+struct dot11_assoc_req {
+ uint16 capability; /* capability information */
+ uint16 listen; /* listen interval */
+} PACKED;
+
+struct dot11_assoc_resp {
+ uint16 capability; /* capability information */
+ uint16 status; /* status code */
+ uint16 aid; /* association ID */
+} PACKED;
+
+struct dot11_action_measure {
+ uint8 category;
+ uint8 action;
+ uint8 token;
+ uint8 data[1];
+} PACKED;
+#define DOT11_ACTION_MEASURE_LEN 3
+
+/**************
+ 802.11h related definitions.
+**************/
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 power;
+} dot11_power_cnst_t;
+
+typedef struct {
+ uint8 min;
+ uint8 max;
+} dot11_power_cap_t;
+
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 tx_pwr;
+ uint8 margin;
+} dot11_tpc_rep_t;
+#define DOT11_MNG_IE_TPC_REPORT_LEN 2 /* length of IE data, not including 2 byte header */
+
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 first_channel;
+ uint8 num_channels;
+} dot11_supp_channels_t;
+
+struct dot11_channel_switch {
+ uint8 id;
+ uint8 len;
+ uint8 mode;
+ uint8 channel;
+ uint8 count;
+} PACKED;
+typedef struct dot11_channel_switch dot11_channel_switch_t;
+
+/* 802.11h Measurement Request/Report IEs */
+/* Measurement Type field */
+#define DOT11_MEASURE_TYPE_BASIC 0
+#define DOT11_MEASURE_TYPE_CCA 1
+#define DOT11_MEASURE_TYPE_RPI 2
+
+/* Measurement Mode field */
+
+/* Measurement Request Modes */
+#define DOT11_MEASURE_MODE_ENABLE (1<<1)
+#define DOT11_MEASURE_MODE_REQUEST (1<<2)
+#define DOT11_MEASURE_MODE_REPORT (1<<3)
+/* Measurement Report Modes */
+#define DOT11_MEASURE_MODE_LATE (1<<0)
+#define DOT11_MEASURE_MODE_INCAPABLE (1<<1)
+#define DOT11_MEASURE_MODE_REFUSED (1<<2)
+/* Basic Measurement Map bits */
+#define DOT11_MEASURE_BASIC_MAP_BSS ((uint8)(1<<0))
+#define DOT11_MEASURE_BASIC_MAP_OFDM ((uint8)(1<<1))
+#define DOT11_MEASURE_BASIC_MAP_UKNOWN ((uint8)(1<<2))
+#define DOT11_MEASURE_BASIC_MAP_RADAR ((uint8)(1<<3))
+#define DOT11_MEASURE_BASIC_MAP_UNMEAS ((uint8)(1<<4))
+
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 token;
+ uint8 mode;
+ uint8 type;
+ uint8 channel;
+ uint8 start_time[8];
+ uint16 duration;
+} dot11_meas_req_t;
+#define DOT11_MNG_IE_MREQ_LEN 14
+/* length of Measure Request IE data not including variable len */
+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
+
+struct dot11_meas_rep {
+ uint8 id;
+ uint8 len;
+ uint8 token;
+ uint8 mode;
+ uint8 type;
+ union
+ {
+ struct {
+ uint8 channel;
+ uint8 start_time[8];
+ uint16 duration;
+ uint8 map;
+ } PACKED basic;
+ uint8 data[1];
+ } PACKED rep;
+} PACKED;
+typedef struct dot11_meas_rep dot11_meas_rep_t;
+
+/* length of Measure Report IE data not including variable len */
+#define DOT11_MNG_IE_MREP_FIXED_LEN 3
+
+struct dot11_meas_rep_basic {
+ uint8 channel;
+ uint8 start_time[8];
+ uint16 duration;
+ uint8 map;
+} PACKED;
+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
+#define DOT11_MEASURE_BASIC_REP_LEN 12
+
+struct dot11_quiet {
+ uint8 id;
+ uint8 len;
+ uint8 count; /* TBTTs until beacon interval in quiet starts */
+ uint8 period; /* Beacon intervals between periodic quiet periods ? */
+ uint16 duration;/* Length of quiet period, in TU's */
+ uint16 offset; /* TU's offset from TBTT in Count field */
+} PACKED;
+typedef struct dot11_quiet dot11_quiet_t;
+
+typedef struct {
+ uint8 channel;
+ uint8 map;
+} chan_map_tuple_t;
+
+typedef struct {
+ uint8 id;
+ uint8 len;
+ uint8 eaddr[ETHER_ADDR_LEN];
+ uint8 interval;
+ chan_map_tuple_t map[1];
+} dot11_ibss_dfs_t;
+
+/* WME Elements */
+#define WME_OUI "\x00\x50\xf2"
+#define WME_VER 1
+#define WME_TYPE 2
+#define WME_SUBTYPE_IE 0 /* Information Element */
+#define WME_SUBTYPE_PARAM_IE 1 /* Parameter Element */
+#define WME_SUBTYPE_TSPEC 2 /* Traffic Specification */
+
+/* WME Access Category Indices (ACIs) */
+#define AC_BE 0 /* Best Effort */
+#define AC_BK 1 /* Background */
+#define AC_VI 2 /* Video */
+#define AC_VO 3 /* Voice */
+#define AC_MAX 4
+
+/* WME Information Element (IE) */
+struct wme_ie {
+ uint8 oui[3];
+ uint8 type;
+ uint8 subtype;
+ uint8 version;
+ uint8 acinfo;
+} PACKED;
+typedef struct wme_ie wme_ie_t;
+#define WME_IE_LEN 7
+
+struct wme_acparam {
+ uint8 ACI;
+ uint8 ECW;
+ uint16 TXOP; /* stored in network order (ls octet first) */
+} PACKED;
+typedef struct wme_acparam wme_acparam_t;
+
+/* WME Parameter Element (PE) */
+struct wme_params {
+ uint8 oui[3];
+ uint8 type;
+ uint8 subtype;
+ uint8 version;
+ uint8 acinfo;
+ uint8 rsvd;
+ wme_acparam_t acparam[4];
+} PACKED;
+typedef struct wme_params wme_params_t;
+#define WME_PARAMS_IE_LEN 24
+
+/* acinfo */
+#define WME_COUNT_MASK 0x0f
+/* ACI */
+#define WME_AIFS_MASK 0x0f
+#define WME_ACM_MASK 0x10
+#define WME_ACI_MASK 0x60
+#define WME_ACI_SHIFT 5
+/* ECW */
+#define WME_CWMIN_MASK 0x0f
+#define WME_CWMAX_MASK 0xf0
+#define WME_CWMAX_SHIFT 4
+
+#define WME_TXOP_UNITS 32
+
+/* WME Traffic Specification (TSPEC) element */
+#define WME_SUBTYPE_TSPEC 2
+#define WME_TSPEC_HDR_LEN 2
+#define WME_TSPEC_BODY_OFF 2
+struct wme_tspec {
+ uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */
+ uint8 type; /* WME_TYPE */
+ uint8 subtype; /* WME_SUBTYPE_TSPEC */
+ uint8 version; /* WME_VERSION */
+ uint16 ts_info; /* TS Info */
+ uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */
+ uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */
+ uint32 min_service_interval; /* Minimum Service Interval (us) */
+ uint32 max_service_interval; /* Maximum Service Interval (us) */
+ uint32 inactivity_interval; /* Inactivity Interval (us) */
+ uint32 service_start; /* Service Start Time (us) */
+ uint32 min_rate; /* Minimum Data Rate (bps) */
+ uint32 mean_rate; /* Mean Data Rate (bps) */
+ uint32 max_burst_size; /* Maximum Burst Size (bytes) */
+ uint32 min_phy_rate; /* Minimum PHY Rate (bps) */
+ uint32 peak_rate; /* Peak Data Rate (bps) */
+ uint32 delay_bound; /* Delay Bound (us) */
+ uint16 surplus_bandwidth; /* Surplus Bandwidth Allowance Factor */
+ uint16 medium_time; /* Medium Time (32 us/s periods) */
+} PACKED;
+typedef struct wme_tspec wme_tspec_t;
+#define WME_TSPEC_LEN 56 /* not including 2-byte header */
+
+/* ts_info */
+/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */
+#define TS_INFO_PRIO_SHIFT_HI 11
+#define TS_INFO_PRIO_MASK_HI (0x7 << TS_INFO_PRIO_SHIFT_HI)
+#define TS_INFO_PRIO_SHIFT_LO 1
+#define TS_INFO_PRIO_MASK_LO (0x7 << TS_INFO_PRIO_SHIFT_LO)
+#define TS_INFO_CONTENTION_SHIFT 7
+#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT)
+#define TS_INFO_DIRECTION_SHIFT 5
+#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT)
+#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT)
+#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT)
+#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT)
+
+/* nom_msdu_size */
+#define FIXED_MSDU_SIZE 0x8000 /* MSDU size is fixed */
+#define MSDU_SIZE_MASK 0x7fff /* (Nominal or fixed) MSDU size */
+
+/* surplus_bandwidth */
+/* Represented as 3 bits of integer, binary point, 13 bits fraction */
+#define INTEGER_SHIFT 13
+#define FRACTION_MASK 0x1FFF
+
+/* Management Notification Frame */
+struct dot11_management_notification {
+ uint8 category; /* DOT11_ACTION_NOTIFICATION */
+ uint8 action;
+ uint8 token;
+ uint8 status;
+ uint8 data[1]; /* Elements */
+} PACKED;
+#define DOT11_MGMT_NOTIFICATION_LEN 4 /* Fixed length */
+
+/* WME Action Codes */
+#define WME_SETUP_REQUEST 0
+#define WME_SETUP_RESPONSE 1
+#define WME_TEARDOWN 2
+
+/* WME Setup Response Status Codes */
+#define WME_ADMISSION_ACCEPTED 0
+#define WME_INVALID_PARAMETERS 1
+#define WME_ADMISSION_REFUSED 3
+
+/* Macro to take a pointer to a beacon or probe response
+ * header and return the char* pointer to the SSID info element
+ */
+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
+
+/* Authentication frame payload constants */
+#define DOT11_OPEN_SYSTEM 0
+#define DOT11_SHARED_KEY 1
+#define DOT11_CHALLENGE_LEN 128
+
+/* Frame control macros */
+#define FC_PVER_MASK 0x3
+#define FC_PVER_SHIFT 0
+#define FC_TYPE_MASK 0xC
+#define FC_TYPE_SHIFT 2
+#define FC_SUBTYPE_MASK 0xF0
+#define FC_SUBTYPE_SHIFT 4
+#define FC_TODS 0x100
+#define FC_TODS_SHIFT 8
+#define FC_FROMDS 0x200
+#define FC_FROMDS_SHIFT 9
+#define FC_MOREFRAG 0x400
+#define FC_MOREFRAG_SHIFT 10
+#define FC_RETRY 0x800
+#define FC_RETRY_SHIFT 11
+#define FC_PM 0x1000
+#define FC_PM_SHIFT 12
+#define FC_MOREDATA 0x2000
+#define FC_MOREDATA_SHIFT 13
+#define FC_WEP 0x4000
+#define FC_WEP_SHIFT 14
+#define FC_ORDER 0x8000
+#define FC_ORDER_SHIFT 15
+
+/* sequence control macros */
+#define SEQNUM_SHIFT 4
+#define FRAGNUM_MASK 0xF
+
+/* Frame Control type/subtype defs */
+
+/* FC Types */
+#define FC_TYPE_MNG 0
+#define FC_TYPE_CTL 1
+#define FC_TYPE_DATA 2
+
+/* Management Subtypes */
+#define FC_SUBTYPE_ASSOC_REQ 0
+#define FC_SUBTYPE_ASSOC_RESP 1
+#define FC_SUBTYPE_REASSOC_REQ 2
+#define FC_SUBTYPE_REASSOC_RESP 3
+#define FC_SUBTYPE_PROBE_REQ 4
+#define FC_SUBTYPE_PROBE_RESP 5
+#define FC_SUBTYPE_BEACON 8
+#define FC_SUBTYPE_ATIM 9
+#define FC_SUBTYPE_DISASSOC 10
+#define FC_SUBTYPE_AUTH 11
+#define FC_SUBTYPE_DEAUTH 12
+#define FC_SUBTYPE_ACTION 13
+
+/* Control Subtypes */
+#define FC_SUBTYPE_PS_POLL 10
+#define FC_SUBTYPE_RTS 11
+#define FC_SUBTYPE_CTS 12
+#define FC_SUBTYPE_ACK 13
+#define FC_SUBTYPE_CF_END 14
+#define FC_SUBTYPE_CF_END_ACK 15
+
+/* Data Subtypes */
+#define FC_SUBTYPE_DATA 0
+#define FC_SUBTYPE_DATA_CF_ACK 1
+#define FC_SUBTYPE_DATA_CF_POLL 2
+#define FC_SUBTYPE_DATA_CF_ACK_POLL 3
+#define FC_SUBTYPE_NULL 4
+#define FC_SUBTYPE_CF_ACK 5
+#define FC_SUBTYPE_CF_POLL 6
+#define FC_SUBTYPE_CF_ACK_POLL 7
+#define FC_SUBTYPE_QOS_DATA 8
+#define FC_SUBTYPE_QOS_NULL 12
+
+/* type-subtype combos */
+#define FC_KIND_MASK (FC_TYPE_MASK | FC_SUBTYPE_MASK)
+
+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
+
+#define FC_ASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
+#define FC_ASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
+#define FC_REASSOC_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
+#define FC_REASSOC_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
+#define FC_PROBE_REQ FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
+#define FC_PROBE_RESP FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
+#define FC_BEACON FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
+#define FC_DISASSOC FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
+#define FC_AUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
+#define FC_DEAUTH FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
+#define FC_ACTION FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
+
+#define FC_PS_POLL FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
+#define FC_RTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
+#define FC_CTS FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
+#define FC_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
+#define FC_CF_END FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
+#define FC_CF_END_ACK FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
+
+#define FC_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
+#define FC_NULL_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
+#define FC_DATA_CF_ACK FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
+#define FC_QOS_DATA FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_DATA)
+#define FC_QOS_NULL FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_QOS_NULL)
+
+/* QoS Control Field */
+
+/* 802.1D Tag */
+#define QOS_PRIO_SHIFT 0
+#define QOS_PRIO_MASK 0x0007
+#define QOS_PRIO(qos) (((qos) & QOS_PRIO_MASK) >> QOS_PRIO_SHIFT)
+
+/* Ack Policy (0 means Acknowledge) */
+#define QOS_ACK_SHIFT 5
+#define QOS_ACK_MASK 0x0060
+#define QOS_ACK(qos) (((qos) & QOS_ACK_MASK) >> QOS_ACK_SHIFT)
+
+/* Management Frames */
+
+/* Management Frame Constants */
+
+/* Fixed fields */
+#define DOT11_MNG_AUTH_ALGO_LEN 2
+#define DOT11_MNG_AUTH_SEQ_LEN 2
+#define DOT11_MNG_BEACON_INT_LEN 2
+#define DOT11_MNG_CAP_LEN 2
+#define DOT11_MNG_AP_ADDR_LEN 6
+#define DOT11_MNG_LISTEN_INT_LEN 2
+#define DOT11_MNG_REASON_LEN 2
+#define DOT11_MNG_AID_LEN 2
+#define DOT11_MNG_STATUS_LEN 2
+#define DOT11_MNG_TIMESTAMP_LEN 8
+
+/* DUR/ID field in assoc resp is 0xc000 | AID */
+#define DOT11_AID_MASK 0x3fff
+
+/* Reason Codes */
+#define DOT11_RC_RESERVED 0
+#define DOT11_RC_UNSPECIFIED 1 /* Unspecified reason */
+#define DOT11_RC_AUTH_INVAL 2 /* Previous authentication no longer valid */
+#define DOT11_RC_DEAUTH_LEAVING 3 /* Deauthenticated because sending station is
+ leaving (or has left) IBSS or ESS */
+#define DOT11_RC_INACTIVITY 4 /* Disassociated due to inactivity */
+#define DOT11_RC_BUSY 5 /* Disassociated because AP is unable to handle
+ all currently associated stations */
+#define DOT11_RC_INVAL_CLASS_2 6 /* Class 2 frame received from
+ nonauthenticated station */
+#define DOT11_RC_INVAL_CLASS_3 7 /* Class 3 frame received from
+ nonassociated station */
+#define DOT11_RC_DISASSOC_LEAVING 8 /* Disassociated because sending station is
+ leaving (or has left) BSS */
+#define DOT11_RC_NOT_AUTH 9 /* Station requesting (re)association is
+ not authenticated with responding station */
+#define DOT11_RC_MAX 23 /* Reason codes > 23 are reserved */
+
+/* Status Codes */
+#define DOT11_STATUS_SUCCESS 0 /* Successful */
+#define DOT11_STATUS_FAILURE 1 /* Unspecified failure */
+#define DOT11_STATUS_CAP_MISMATCH 10 /* Cannot support all requested capabilities
+ in the Capability Information field */
+#define DOT11_STATUS_REASSOC_FAIL 11 /* Reassociation denied due to inability to
+ confirm that association exists */
+#define DOT11_STATUS_ASSOC_FAIL 12 /* Association denied due to reason outside
+ the scope of this standard */
+#define DOT11_STATUS_AUTH_MISMATCH 13 /* Responding station does not support the
+ specified authentication algorithm */
+#define DOT11_STATUS_AUTH_SEQ 14 /* Received an Authentication frame with
+ authentication transaction sequence number
+ out of expected sequence */
+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL 15 /* Authentication rejected because of challenge failure */
+#define DOT11_STATUS_AUTH_TIMEOUT 16 /* Authentication rejected due to timeout waiting
+ for next frame in sequence */
+#define DOT11_STATUS_ASSOC_BUSY_FAIL 17 /* Association denied because AP is unable to
+ handle additional associated stations */
+#define DOT11_STATUS_ASSOC_RATE_MISMATCH 18 /* Association denied due to requesting station
+ not supporting all of the data rates in the
+ BSSBasicRateSet parameter */
+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED 19 /* Association denied due to requesting station
+ not supporting the Short Preamble option */
+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED 20 /* Association denied due to requesting station
+ not supporting the PBCC Modulation option */
+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED 21 /* Association denied due to requesting station
+ not supporting the Channel Agility option */
+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED 22 /* Association denied because Spectrum Management
+ capability is required. */
+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP 23 /* Association denied because the info in the
+ Power Cap element is unacceptable. */
+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS 24 /* Association denied because the info in the
+ Supported Channel element is unacceptable */
+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED 25 /* Association denied due to requesting station
+ not supporting the Short Slot Time option */
+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED 26 /* Association denied due to requesting station
+ not supporting the ER-PBCC Modulation option */
+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED 27 /* Association denied due to requesting station
+ not supporting the DSS-OFDM option */
+
+/* Info Elts, length of INFORMATION portion of Info Elts */
+#define DOT11_MNG_DS_PARAM_LEN 1
+#define DOT11_MNG_IBSS_PARAM_LEN 2
+
+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
+ * followed by 1 to 251 bytes of Partial Virtual Bitmap */
+#define DOT11_MNG_TIM_FIXED_LEN 3
+#define DOT11_MNG_TIM_DTIM_COUNT 0
+#define DOT11_MNG_TIM_DTIM_PERIOD 1
+#define DOT11_MNG_TIM_BITMAP_CTL 2
+#define DOT11_MNG_TIM_PVB 3
+
+/* TLV defines */
+#define TLV_TAG_OFF 0
+#define TLV_LEN_OFF 1
+#define TLV_HDR_LEN 2
+#define TLV_BODY_OFF 2
+
+/* Management Frame Information Element IDs */
+#define DOT11_MNG_SSID_ID 0
+#define DOT11_MNG_RATES_ID 1
+#define DOT11_MNG_FH_PARMS_ID 2
+#define DOT11_MNG_DS_PARMS_ID 3
+#define DOT11_MNG_CF_PARMS_ID 4
+#define DOT11_MNG_TIM_ID 5
+#define DOT11_MNG_IBSS_PARMS_ID 6
+#define DOT11_MNG_COUNTRY_ID 7
+#define DOT11_MNG_HOPPING_PARMS_ID 8
+#define DOT11_MNG_HOPPING_TABLE_ID 9
+#define DOT11_MNG_REQUEST_ID 10
+#define DOT11_MNG_CHALLENGE_ID 16
+#define DOT11_MNG_PWR_CONSTRAINT_ID 32 /* 11H PowerConstraint */
+#define DOT11_MNG_PWR_CAP_ID 33 /* 11H PowerCapability */
+#define DOT11_MNG_TPC_REQUEST_ID 34 /* 11H TPC Request */
+#define DOT11_MNG_TPC_REPORT_ID 35 /* 11H TPC Report */
+#define DOT11_MNG_SUPP_CHANNELS_ID 36 /* 11H Supported Channels */
+#define DOT11_MNG_CHANNEL_SWITCH_ID 37 /* 11H ChannelSwitch Announcement*/
+#define DOT11_MNG_MEASURE_REQUEST_ID 38 /* 11H MeasurementRequest */
+#define DOT11_MNG_MEASURE_REPORT_ID 39 /* 11H MeasurementReport */
+#define DOT11_MNG_QUIET_ID 40 /* 11H Quiet */
+#define DOT11_MNG_IBSS_DFS_ID 41 /* 11H IBSS_DFS */
+#define DOT11_MNG_ERP_ID 42
+#define DOT11_MNG_NONERP_ID 47
+#define DOT11_MNG_EXT_RATES_ID 50
+#define DOT11_MNG_WPA_ID 221
+#define DOT11_MNG_PROPR_ID 221
+
+/* ERP info element bit values */
+#define DOT11_MNG_ERP_LEN 1 /* ERP is currently 1 byte long */
+#define DOT11_MNG_NONERP_PRESENT 0x01 /* NonERP (802.11b) STAs are present in the BSS */
+#define DOT11_MNG_USE_PROTECTION 0x02 /* Use protection mechanisms for ERP-OFDM frames */
+#define DOT11_MNG_BARKER_PREAMBLE 0x04 /* Short Preambles: 0 == allowed, 1 == not allowed */
+
+/* Capability Information Field */
+#define DOT11_CAP_ESS 0x0001
+#define DOT11_CAP_IBSS 0x0002
+#define DOT11_CAP_POLLABLE 0x0004
+#define DOT11_CAP_POLL_RQ 0x0008
+#define DOT11_CAP_PRIVACY 0x0010
+#define DOT11_CAP_SHORT 0x0020
+#define DOT11_CAP_PBCC 0x0040
+#define DOT11_CAP_AGILITY 0x0080
+#define DOT11_CAP_SPECTRUM 0x0100
+#define DOT11_CAP_SHORTSLOT 0x0400
+#define DOT11_CAP_CCK_OFDM 0x2000
+
+/* Action Frame Constants */
+#define DOT11_ACTION_CAT_ERR_MASK 0x80
+#define DOT11_ACTION_CAT_SPECT_MNG 0x00
+#define DOT11_ACTION_NOTIFICATION 0x11 /* 17 */
+
+#define DOT11_ACTION_ID_M_REQ 0
+#define DOT11_ACTION_ID_M_REP 1
+#define DOT11_ACTION_ID_TPC_REQ 2
+#define DOT11_ACTION_ID_TPC_REP 3
+#define DOT11_ACTION_ID_CHANNEL_SWITCH 4
+
+/* MLME Enumerations */
+#define DOT11_BSSTYPE_INFRASTRUCTURE 0
+#define DOT11_BSSTYPE_INDEPENDENT 1
+#define DOT11_BSSTYPE_ANY 2
+#define DOT11_SCANTYPE_ACTIVE 0
+#define DOT11_SCANTYPE_PASSIVE 1
+
+/* 802.11 A PHY constants */
+#define APHY_SLOT_TIME 9
+#define APHY_SIFS_TIME 16
+#define APHY_DIFS_TIME (APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
+#define APHY_PREAMBLE_TIME 16
+#define APHY_SIGNAL_TIME 4
+#define APHY_SYMBOL_TIME 4
+#define APHY_SERVICE_NBITS 16
+#define APHY_TAIL_NBITS 6
+#define APHY_CWMIN 15
+
+/* 802.11 B PHY constants */
+#define BPHY_SLOT_TIME 20
+#define BPHY_SIFS_TIME 10
+#define BPHY_DIFS_TIME 50
+#define BPHY_PLCP_TIME 192
+#define BPHY_PLCP_SHORT_TIME 96
+#define BPHY_CWMIN 31
+
+/* 802.11 G constants */
+#define DOT11_OFDM_SIGNAL_EXTENSION 6
+
+#define PHY_CWMAX 1023
+
+#define DOT11_MAXNUMFRAGS 16 /* max # fragments per MSDU */
+
+/* dot11Counters Table - 802.11 spec., Annex D */
+typedef struct d11cnt {
+ uint32 txfrag; /* dot11TransmittedFragmentCount */
+ uint32 txmulti; /* dot11MulticastTransmittedFrameCount */
+ uint32 txfail; /* dot11FailedCount */
+ uint32 txretry; /* dot11RetryCount */
+ uint32 txretrie; /* dot11MultipleRetryCount */
+ uint32 rxdup; /* dot11FrameduplicateCount */
+ uint32 txrts; /* dot11RTSSuccessCount */
+ uint32 txnocts; /* dot11RTSFailureCount */
+ uint32 txnoack; /* dot11ACKFailureCount */
+ uint32 rxfrag; /* dot11ReceivedFragmentCount */
+ uint32 rxmulti; /* dot11MulticastReceivedFrameCount */
+ uint32 rxcrc; /* dot11FCSErrorCount */
+ uint32 txfrmsnt; /* dot11TransmittedFrameCount */
+ uint32 rxundec; /* dot11WEPUndecryptableCount */
+} d11cnt_t;
+
+/* BRCM OUI */
+#define BRCM_OUI "\x00\x10\x18"
+
+/* BRCM info element */
+struct brcm_ie {
+ uchar id;
+ uchar len;
+ uchar oui[3];
+ uchar ver;
+ uchar assoc; /* # of assoc STAs */
+ uchar flags; /* misc flags */
+} PACKED;
+#define BRCM_IE_LEN 8
+typedef struct brcm_ie brcm_ie_t;
+#define BRCM_IE_VER 1
+
+/* brcm_ie flags */
+#define BRF_ABCAP 0x1 /* afterburner capable */
+#define BRF_ABRQRD 0x2 /* afterburner requested */
+
+/* WPA definitions */
+#define WPA_VERSION 1
+#define WPA_OUI "\x00\x50\xF2"
+
+#define WPA_OUI_LEN 3
+
+/* WPA authentication modes */
+#define WPA_AUTH_NONE 0 /* None */
+#define WPA_AUTH_UNSPECIFIED 1 /* Unspecified authentication over 802.1X: default for WPA */
+#define WPA_AUTH_PSK 2 /* Pre-shared Key over 802.1X */
+#define WPA_AUTH_DISABLED 255 /* Legacy (i.e., non-WPA) */
+
+#define IS_WPA_AUTH(auth) ((auth) == WPA_AUTH_NONE || \
+ (auth) == WPA_AUTH_UNSPECIFIED || \
+ (auth) == WPA_AUTH_PSK)
+
+
+/* Key related defines */
+#define DOT11_MAX_DEFAULT_KEYS 4 /* number of default keys */
+#define DOT11_MAX_KEY_SIZE 32 /* max size of any key */
+#define DOT11_MAX_IV_SIZE 16 /* max size of any IV */
+#define DOT11_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */
+
+#define WEP1_KEY_SIZE 5 /* max size of any WEP key */
+#define WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */
+#define WEP128_KEY_SIZE 13 /* max size of any WEP key */
+#define WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */
+#define TKIP_MIC_SIZE 8 /* size of TKIP MIC */
+#define TKIP_EOM_SIZE 7 /* max size of TKIP EOM */
+#define TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */
+#define TKIP_KEY_SIZE 32 /* size of any TKIP key */
+#define TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */
+#define TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */
+#define TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */
+#define TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */
+#define AES_KEY_SIZE 16 /* size of AES key */
+
+#undef PACKED
+#if !defined(__GNUC__)
+#pragma pack()
+#endif
+
+#endif /* _802_11_H_ */
--- /dev/null
+/*******************************************************************************
+ * $Id$
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
+ ******************************************************************************/
+
+#ifndef _NET_ETHERNET_H_ /* use native BSD ethernet.h when available */
+#define _NET_ETHERNET_H_
+
+#ifndef _TYPEDEFS_H_
+#include "typedefs.h"
+#endif
+
+#if defined(__GNUC__)
+#define PACKED __attribute__((packed))
+#else
+#define PACKED
+#endif
+
+/*
+ * The number of bytes in an ethernet (MAC) address.
+ */
+#define ETHER_ADDR_LEN 6
+
+/*
+ * The number of bytes in the type field.
+ */
+#define ETHER_TYPE_LEN 2
+
+/*
+ * The number of bytes in the trailing CRC field.
+ */
+#define ETHER_CRC_LEN 4
+
+/*
+ * The length of the combined header.
+ */
+#define ETHER_HDR_LEN (ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
+
+/*
+ * The minimum packet length.
+ */
+#define ETHER_MIN_LEN 64
+
+/*
+ * The minimum packet user data length.
+ */
+#define ETHER_MIN_DATA 46
+
+/*
+ * The maximum packet length.
+ */
+#define ETHER_MAX_LEN 1518
+
+/*
+ * The maximum packet user data length.
+ */
+#define ETHER_MAX_DATA 1500
+
+/*
+ * Used to uniquely identify a 802.1q VLAN-tagged header.
+ */
+#define VLAN_TAG 0x8100
+
+/*
+ * Located after dest & src address in ether header.
+ */
+#define VLAN_FIELDS_OFFSET (ETHER_ADDR_LEN * 2)
+
+/*
+ * 4 bytes of vlan field info.
+ */
+#define VLAN_FIELDS_SIZE 4
+
+/* location of bits in 16-bit vlan fields */
+#define VLAN_PRI_SHIFT 13 /* user priority */
+#define VLAN_CFI_SHIFT 12 /* canonical format indicator bit */
+
+/* 3 bits of priority */
+#define VLAN_PRI_MASK 7
+/* 12 bits of vlan identfier (VID) */
+#define VLAN_VID_MASK 0xFFF /* VLAN identifier (VID) field */
+
+struct vlan_tags {
+ uint16 tag_type; /* 0x8100 for VLAN */
+ uint16 tag_control; /* prio | cfi | vid */
+} PACKED ;
+
+/* 802.1X ethertype */
+
+#define ETHER_TYPE_IP 0x0800 /* IP */
+#define ETHER_TYPE_BRCM 0x886c /* Broadcom Corp. */
+#define ETHER_TYPE_802_1X 0x888e /* 802.1x */
+
+#define ETHER_BRCM_SUBTYPE_LEN 4 /* Broadcom 4byte subtype follows ethertype */
+#define ETHER_BRCM_CRAM 0x1 /* Broadcom subtype cram protocol */
+
+/*
+ * A macro to validate a length with
+ */
+#define ETHER_IS_VALID_LEN(foo) \
+ ((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
+
+
+#ifndef __INCif_etherh /* Quick and ugly hack for VxWorks */
+/*
+ * Structure of a 10Mb/s Ethernet header.
+ */
+struct ether_header {
+ uint8 ether_dhost[ETHER_ADDR_LEN];
+ uint8 ether_shost[ETHER_ADDR_LEN];
+ uint16 ether_type;
+} PACKED ;
+
+/*
+ * Structure of a 48-bit Ethernet address.
+ */
+struct ether_addr {
+ uint8 octet[ETHER_ADDR_LEN];
+} PACKED ;
+#endif
+
+/*
+ * Takes a pointer, returns true if a 48-bit multicast address
+ * (including broadcast, since it is all ones)
+ */
+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
+
+/*
+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
+ */
+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] & \
+ ((uint8 *)(ea))[1] & \
+ ((uint8 *)(ea))[2] & \
+ ((uint8 *)(ea))[3] & \
+ ((uint8 *)(ea))[4] & \
+ ((uint8 *)(ea))[5]) == 0xff)
+
+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
+
+/*
+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
+ */
+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] | \
+ ((uint8 *)(ea))[1] | \
+ ((uint8 *)(ea))[2] | \
+ ((uint8 *)(ea))[3] | \
+ ((uint8 *)(ea))[4] | \
+ ((uint8 *)(ea))[5]) == 0)
+
+/* Differentiated Services Codepoint - lower 6 bits of tos in iphdr */
+#define DSCP_PRI_MASK 0x3F /* bits 0-6 */
+#define DSCP_WME_PRI_MASK 0x38 /* bits 3-6 */
+#define DSCP_WME_PRI_SHIFT 3
+
+#undef PACKED
+
+#endif /* _NET_ETHERNET_H_ */
--- /dev/null
+/*
+ * Shell-like utility functions
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _shutils_h_
+#define _shutils_h_
+#include <string.h>
+/*
+ * Reads file and returns contents
+ * @param fd file descriptor
+ * @return contents of file or NULL if an error occurred
+ */
+extern char * fd2str(int fd);
+
+/*
+ * Reads file and returns contents
+ * @param path path to file
+ * @return contents of file or NULL if an error occurred
+ */
+extern char * file2str(const char *path);
+
+/*
+ * Waits for a file descriptor to become available for reading or unblocked signal
+ * @param fd file descriptor
+ * @param timeout seconds to wait before timing out or 0 for no timeout
+ * @return 1 if descriptor changed status or 0 if timed out or -1 on error
+ */
+extern int waitfor(int fd, int timeout);
+
+/*
+ * Concatenates NULL-terminated list of arguments into a single
+ * commmand and executes it
+ * @param argv argument list
+ * @param path NULL, ">output", or ">>output"
+ * @param timeout seconds to wait before timing out or 0 for no timeout
+ * @param ppid NULL to wait for child termination or pointer to pid
+ * @return return value of executed command or errno
+ */
+extern int _eval(char *const argv[], char *path, int timeout, pid_t *ppid);
+
+/*
+ * Concatenates NULL-terminated list of arguments into a single
+ * commmand and executes it
+ * @param argv argument list
+ * @return stdout of executed command or NULL if an error occurred
+ */
+extern char * _backtick(char *const argv[]);
+
+/*
+ * Kills process whose PID is stored in plaintext in pidfile
+ * @param pidfile PID file
+ * @return 0 on success and errno on failure
+ */
+extern int kill_pidfile(char *pidfile);
+
+/*
+ * fread() with automatic retry on syscall interrupt
+ * @param ptr location to store to
+ * @param size size of each element of data
+ * @param nmemb number of elements
+ * @param stream file stream
+ * @return number of items successfully read
+ */
+extern int safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream);
+
+/*
+ * fwrite() with automatic retry on syscall interrupt
+ * @param ptr location to read from
+ * @param size size of each element of data
+ * @param nmemb number of elements
+ * @param stream file stream
+ * @return number of items successfully written
+ */
+extern int safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream);
+
+/*
+ * Convert Ethernet address string representation to binary data
+ * @param a string in xx:xx:xx:xx:xx:xx notation
+ * @param e binary data
+ * @return TRUE if conversion was successful and FALSE otherwise
+ */
+extern int ether_atoe(const char *a, unsigned char *e);
+
+/*
+ * Convert Ethernet address binary data to string representation
+ * @param e binary data
+ * @param a string in xx:xx:xx:xx:xx:xx notation
+ * @return a
+ */
+extern char * ether_etoa(const unsigned char *e, char *a);
+
+/*
+ * Concatenate two strings together into a caller supplied buffer
+ * @param s1 first string
+ * @param s2 second string
+ * @param buf buffer large enough to hold both strings
+ * @return buf
+ */
+static inline char * strcat_r(const char *s1, const char *s2, char *buf)
+{
+ strcpy(buf, s1);
+ strcat(buf, s2);
+ return buf;
+}
+
+/* Check for a blank character; that is, a space or a tab */
+#define isblank(c) ((c) == ' ' || (c) == '\t')
+
+/* Strip trailing CR/NL from string <s> */
+#define chomp(s) ({ \
+ char *c = (s) + strlen((s)) - 1; \
+ while ((c > (s)) && (*c == '\n' || *c == '\r' || *c == ' ')) \
+ *c-- = '\0'; \
+ s; \
+})
+
+/* Simple version of _backtick() */
+#define backtick(cmd, args...) ({ \
+ char *argv[] = { cmd, ## args, NULL }; \
+ _backtick(argv); \
+})
+
+/* Simple version of _eval() (no timeout and wait for child termination) */
+#define eval(cmd, args...) ({ \
+ char *argv[] = { cmd, ## args, NULL }; \
+ _eval(argv, ">/dev/console", 0, NULL); \
+})
+
+/* Copy each token in wordlist delimited by space into word */
+#define foreach(word, wordlist, next) \
+ for (next = &wordlist[strspn(wordlist, " ")], \
+ strncpy(word, next, sizeof(word)), \
+ word[strcspn(word, " ")] = '\0', \
+ word[sizeof(word) - 1] = '\0', \
+ next = strchr(next, ' '); \
+ strlen(word); \
+ next = next ? &next[strspn(next, " ")] : "", \
+ strncpy(word, next, sizeof(word)), \
+ word[strcspn(word, " ")] = '\0', \
+ word[sizeof(word) - 1] = '\0', \
+ next = strchr(next, ' '))
+
+/* Return NUL instead of NULL if undefined */
+#define safe_getenv(s) (getenv(s) ? : "")
+
+/* Print directly to the console */
+#define cprintf(fmt, args...) do { \
+ FILE *fp = fopen("/dev/console", "w"); \
+ if (fp) { \
+ fprintf(fp, fmt, ## args); \
+ fclose(fp); \
+ } \
+} while (0)
+
+/* Debug print */
+#ifdef DEBUG
+#define dprintf(fmt, args...) cprintf("%s: " fmt, __FUNCTION__, ## args)
+#else
+#define dprintf(fmt, args...)
+#endif
+
+#ifdef vxworks
+
+#include <inetLib.h>
+#define inet_aton(a, n) ((inet_aton((a), (n)) == ERROR) ? 0 : 1)
+#define inet_ntoa(n) ({ char a[INET_ADDR_LEN]; inet_ntoa_b ((n), a); a; })
+
+#include <typedefs.h>
+#include <bcmutils.h>
+#define ether_atoe(a, e) bcm_ether_atoe((a), (e))
+#define ether_etoa(e, a) bcm_ether_ntoa((e), (a))
+
+/* These declarations are not available where you would expect them */
+extern int vsnprintf (char *, size_t, const char *, va_list);
+extern int snprintf(char *str, size_t count, const char *fmt, ...);
+extern char *strdup(const char *);
+extern char *strsep(char **stringp, char *delim);
+extern int strcasecmp(const char *s1, const char *s2);
+extern int strncasecmp(const char *s1, const char *s2, size_t n);
+
+/* Neither are socket() and connect() */
+#include <sockLib.h>
+
+#ifdef DEBUG
+#undef dprintf
+#define dprintf printf
+#endif
+#endif
+
+#endif /* _shutils_h_ */
--- /dev/null
+/*
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ * $Id$
+ */
+
+#ifndef _TYPEDEFS_H_
+#define _TYPEDEFS_H_
+
+
+/* Define 'SITE_TYPEDEFS' in the compile to include a site specific
+ * typedef file "site_typedefs.h".
+ *
+ * If 'SITE_TYPEDEFS' is not defined, then the "Inferred Typedefs"
+ * section of this file makes inferences about the compile environment
+ * based on defined symbols and possibly compiler pragmas.
+ *
+ * Following these two sections is the "Default Typedefs"
+ * section. This section is only prcessed if 'USE_TYPEDEF_DEFAULTS' is
+ * defined. This section has a default set of typedefs and a few
+ * proprocessor symbols (TRUE, FALSE, NULL, ...).
+ */
+
+#ifdef SITE_TYPEDEFS
+
+/*******************************************************************************
+ * Site Specific Typedefs
+ *******************************************************************************/
+
+#include "site_typedefs.h"
+
+#else
+
+/*******************************************************************************
+ * Inferred Typedefs
+ *******************************************************************************/
+
+/* Infer the compile environment based on preprocessor symbols and pramas.
+ * Override type definitions as needed, and include configuration dependent
+ * header files to define types.
+ */
+
+#ifdef __cplusplus
+
+#define TYPEDEF_BOOL
+#ifndef FALSE
+#define FALSE false
+#endif
+#ifndef TRUE
+#define TRUE true
+#endif
+
+#else /* ! __cplusplus */
+
+/* for Windows build, define bool as a uchar instead of the default int */
+#if defined(_WIN32)
+
+#define TYPEDEF_BOOL
+typedef unsigned char bool;
+
+#endif /* _WIN32 */
+
+#endif /* ! __cplusplus */
+
+#ifdef _MSC_VER /* Microsoft C */
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+typedef signed __int64 int64;
+typedef unsigned __int64 uint64;
+#endif
+
+#if defined(MACOSX) && defined(KERNEL)
+#define TYPEDEF_BOOL
+#endif
+
+
+#if defined(linux)
+#define TYPEDEF_UINT
+#define TYPEDEF_USHORT
+#define TYPEDEF_ULONG
+#endif
+
+#if !defined(linux) && !defined(_WIN32) && !defined(PMON) && !defined(_CFE_)
+#define TYPEDEF_UINT
+#define TYPEDEF_USHORT
+#endif
+
+
+/* Do not support the (u)int64 types with strict ansi for GNU C */
+#if defined(__GNUC__) && defined(__STRICT_ANSI__)
+#define TYPEDEF_INT64
+#define TYPEDEF_UINT64
+#endif
+
+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode
+ * for singned or unsigned */
+#if defined(__ICL)
+
+#define TYPEDEF_INT64
+
+#if defined(__STDC__)
+#define TYPEDEF_UINT64
+#endif
+
+#endif /* __ICL */
+
+
+#if !defined(_WIN32) && !defined(PMON) && !defined(_CFE_)
+
+/* pick up ushort & uint from standard types.h */
+#if defined(linux) && defined(__KERNEL__)
+
+#include <linux/types.h> /* sys/types.h and linux/types.h are oil and water */
+
+#else
+
+#include <sys/types.h>
+
+#endif
+
+#endif /* !_WIN32 && !PMON && !_CFE_ */
+
+#if defined(MACOSX) && defined(KERNEL)
+#include <IOKit/IOTypes.h>
+#endif
+
+
+/* use the default typedefs in the next section of this file */
+#define USE_TYPEDEF_DEFAULTS
+
+#endif /* SITE_TYPEDEFS */
+
+
+/*******************************************************************************
+ * Default Typedefs
+ *******************************************************************************/
+
+#ifdef USE_TYPEDEF_DEFAULTS
+#undef USE_TYPEDEF_DEFAULTS
+
+#ifndef TYPEDEF_BOOL
+typedef int bool;
+#endif
+
+/*----------------------- define uchar, ushort, uint, ulong ----------------*/
+
+#ifndef TYPEDEF_UCHAR
+typedef unsigned char uchar;
+#endif
+
+#ifndef TYPEDEF_USHORT
+typedef unsigned short ushort;
+#endif
+
+#ifndef TYPEDEF_UINT
+typedef unsigned int uint;
+#endif
+
+#ifndef TYPEDEF_ULONG
+typedef unsigned long ulong;
+#endif
+
+/*----------------------- define [u]int8/16/32/64 --------------------------*/
+
+#ifndef TYPEDEF_UINT8
+typedef unsigned char uint8;
+#endif
+
+#ifndef TYPEDEF_UINT16
+typedef unsigned short uint16;
+#endif
+
+#ifndef TYPEDEF_UINT32
+typedef unsigned int uint32;
+#endif
+
+#ifndef TYPEDEF_UINT64
+typedef unsigned long long uint64;
+#endif
+
+#ifndef TYPEDEF_INT8
+typedef signed char int8;
+#endif
+
+#ifndef TYPEDEF_INT16
+typedef signed short int16;
+#endif
+
+#ifndef TYPEDEF_INT32
+typedef signed int int32;
+#endif
+
+#ifndef TYPEDEF_INT64
+typedef signed long long int64;
+#endif
+
+/*----------------------- define float32/64, float_t -----------------------*/
+
+#ifndef TYPEDEF_FLOAT32
+typedef float float32;
+#endif
+
+#ifndef TYPEDEF_FLOAT64
+typedef double float64;
+#endif
+
+/*
+ * abstracted floating point type allows for compile time selection of
+ * single or double precision arithmetic. Compiling with -DFLOAT32
+ * selects single precision; the default is double precision.
+ */
+
+#ifndef TYPEDEF_FLOAT_T
+
+#if defined(FLOAT32)
+typedef float32 float_t;
+#else /* default to double precision floating point */
+typedef float64 float_t;
+#endif
+
+#endif /* TYPEDEF_FLOAT_T */
+
+/*----------------------- define macro values -----------------------------*/
+
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+#ifndef OFF
+#define OFF 0
+#endif
+
+#ifndef ON
+#define ON 1
+#endif
+
+/*----------------------- define PTRSZ, INLINE ----------------------------*/
+
+#ifndef PTRSZ
+#define PTRSZ sizeof (char*)
+#endif
+
+#ifndef INLINE
+
+#ifdef _MSC_VER
+
+#define INLINE __inline
+
+#elif __GNUC__
+
+#define INLINE __inline__
+
+#else
+
+#define INLINE
+
+#endif /* _MSC_VER */
+
+#endif /* INLINE */
+
+#undef TYPEDEF_BOOL
+#undef TYPEDEF_UCHAR
+#undef TYPEDEF_USHORT
+#undef TYPEDEF_UINT
+#undef TYPEDEF_ULONG
+#undef TYPEDEF_UINT8
+#undef TYPEDEF_UINT16
+#undef TYPEDEF_UINT32
+#undef TYPEDEF_UINT64
+#undef TYPEDEF_INT8
+#undef TYPEDEF_INT16
+#undef TYPEDEF_INT32
+#undef TYPEDEF_INT64
+#undef TYPEDEF_FLOAT32
+#undef TYPEDEF_FLOAT64
+#undef TYPEDEF_FLOAT_T
+
+#endif /* USE_TYPEDEF_DEFAULTS */
+
+#endif /* _TYPEDEFS_H_ */
--- /dev/null
+#include <cy_conf.h>
+
+extern int diag_led(int type, int act);
+extern int C_led(int i);
+extern int get_single_ip(char *ipaddr, int which);
+extern char *get_mac_from_ip(char *ip);
+extern struct dns_lists *get_dns_list(int no);
+extern int dns_to_resolv(void);
+extern char *get_wan_face(void);
+extern int check_wan_link(int num);
+extern char *get_complete_lan_ip(char *ip);
+extern int get_int_len(int num);
+extern int file_to_buf(char *path, char *buf, int len);
+extern int buf_to_file(char *path, char *buf);
+extern pid_t* find_pid_by_name( char* pidName);
+extern int find_pid_by_ps(char* pidName);
+extern int *find_all_pid_by_ps(char* pidName);
+extern char *find_name_by_proc(int pid);
+extern int get_ppp_pid(char *file);
+extern long convert_ver(char *ver);
+extern int check_flash(void);
+extern int check_action(void);
+extern int check_now_boot(void);
+extern int check_hw_type(void);
+extern int is_exist(char *filename);
+extern void set_ip_forward(char c);
+struct mtu_lists *get_mtu(char *proto);
+extern void set_host_domain_name(void);
+
+extern void encode(char *buf, int len);
+extern void decode(char *buf, int len);
+
+extern int sys_netdev_ioctl(int family, int socket, char *if_name, int cmd, struct ifreq *ifr);
+
+int ct_openlog(const char *ident, int option, int facility, char *log_name);
+void ct_syslog(int level, int enable, const char *fmt,...);
+void ct_logger(int level, const char *fmt,...);
+struct wl_assoc_mac * get_wl_assoc_mac(int *c);
+
+
+
+enum { DMZ, SESSION, DIAG , WL};
+
+enum { START_LED, STOP_LED };
+
+typedef enum { ACT_IDLE,
+ ACT_TFTP_UPGRADE,
+ ACT_WEB_UPGRADE,
+ ACT_WEBS_UPGRADE,
+ ACT_SW_RESTORE,
+ ACT_HW_RESTORE } ACTION;
+
+enum { UNKNOWN_BOOT = -1, PMON_BOOT, CFE_BOOT };
+
+enum { BCM4702_CHIP, BCM4712_CHIP, BCM5325E_CHIP };
+
+enum { FIRST, SECOND };
+
+enum { SYSLOG_LOG=1, SYSLOG_DEBUG, CONSOLE_ONLY, LOG_CONSOLE, DEBUG_CONSOLE };
+
+#define ACTION(cmd) buf_to_file(ACTION_FILE, cmd)
+
+struct dns_lists {
+ int num_servers;
+ char dns_server[4][16];
+};
+
+#define NOT_USING 0
+#define USING 1
+
+struct wl_assoc_mac
+{
+ char mac[18];
+};
+
+struct mtu_lists {
+ char *proto; /* protocol */
+ char *min; /* min mtu */
+ char *max; /* max mtu */
+};
+
+
+#define PPP_PSEUDO_IP "10.64.64.64"
+#define PPP_PSEUDO_NM "255.255.255.255"
+#define PPP_PSEUDO_GW "10.112.112.112"
+
+#define PING_TMP "/tmp/ping.log"
+#define TRACEROUTE_TMP "/tmp/traceroute.log"
+#define MAX_BUF_LEN 254
+
+#define RESOLV_FILE "/tmp/resolv.conf"
+#define HOSTS_FILE "/tmp/hosts"
+
+#define LOG_FILE "/var/log/mess"
+
+#define ACTION_FILE "/tmp/action"
+
+
+#define split(word, wordlist, next, delim) \
+ for (next = wordlist, \
+ strncpy(word, next, sizeof(word)), \
+ word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \
+ next = next ? next + sizeof(delim) - 1 : NULL ; \
+ strlen(word); \
+ next = next ? : "", \
+ strncpy(word, next, sizeof(word)), \
+ word[(next=strstr(next, delim)) ? strstr(word, delim) - word : sizeof(word) - 1] = '\0', \
+ next = next ? next + sizeof(delim) - 1 : NULL)
+
+#define STRUCT_LEN(name) sizeof(name)/sizeof(name[0])
+
+#define printHEX(str,len) { \
+ int i; \
+ for (i=0 ; i<len ; i++) { \
+ printf("%02X ", (unsigned char)*(str+i)); \
+ if(((i+1)%16) == 0) printf("- "); \
+ if(((i+1)%32) == 0) printf("\n"); \
+ } \
+ printf("\n\n"); \
+}
+
+
+#define printASC(str,len) { \
+ int i; \
+ for (i=0 ; i<len ; i++) { \
+ printf("%c", (unsigned char)*(str+i)); \
+ if(((i+1)%16) == 0) printf("- "); \
+ if(((i+1)%32) == 0) printf("\n"); \
+ } \
+ printf("\n\n"); \
+}
--- /dev/null
+/*
+ * Custom OID/ioctl definitions for
+ * Broadcom 802.11abg Networking Device Driver
+ *
+ * Definitions subject to change without notice.
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _wlioctl_h_
+#define _wlioctl_h_
+
+#include <typedefs.h>
+#include <proto/ethernet.h>
+#include <proto/802.11.h>
+
+#if defined(__GNUC__)
+#define PACKED __attribute__((packed))
+#else
+#define PACKED
+#endif
+
+#define WL_NUMRATES 255 /* max # of rates in a rateset */
+
+typedef struct wl_rateset {
+ uint32 count; /* # rates in this set */
+ uint8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
+} wl_rateset_t;
+
+#define WL_CHANSPEC_CHAN_MASK 0x0fff
+#define WL_CHANSPEC_BAND_MASK 0xf000
+#define WL_CHANSPEC_BAND_SHIFT 12
+#define WL_CHANSPEC_BAND_A 0x1000
+#define WL_CHANSPEC_BAND_B 0x2000
+
+/*
+ * Per-bss information structure.
+ */
+
+#define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */
+#define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */
+
+typedef struct wl_bss_info106 {
+ uint version; /* version field */
+ struct ether_addr BSSID;
+ uint8 SSID_len;
+ uint8 SSID[32];
+ uint8 Privacy; /* 0=No WEP, 1=Use WEP */
+ int16 RSSI; /* receive signal strength (in dBm) */
+ uint16 beacon_period; /* units are Kusec */
+ uint16 atim_window; /* units are Kusec */
+ uint8 channel; /* Channel no. */
+ int8 infra; /* 0=IBSS, 1=infrastructure, 2=unknown */
+ struct {
+ uint count; /* # rates in this set */
+ uint8 rates[12]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ uint8 dtim_period; /* DTIM period */
+ int8 phy_noise; /* noise right after tx (in dBm) */
+ uint16 capability; /* Capability information */
+ struct dot11_bcn_prb *prb; /* probe response frame (ioctl na) */
+ uint16 prb_len; /* probe response frame length (ioctl na) */
+ struct {
+ uint8 supported; /* wpa supported */
+ uint8 multicast; /* multicast cipher */
+ uint8 ucount; /* count of unicast ciphers */
+ uint8 unicast[4]; /* unicast ciphers */
+ uint8 acount; /* count of auth modes */
+ uint8 auth[4]; /* Authentication modes */
+ } wpa;
+} wl_bss_info106_t;
+
+typedef struct wl_bss_info {
+ uint32 version; /* version field */
+ uint32 length; /* byte length of data in this record, starting at version and including IEs */
+ struct ether_addr BSSID;
+ uint16 beacon_period; /* units are Kusec */
+ uint16 capability; /* Capability information */
+ uint8 SSID_len;
+ uint8 SSID[32];
+ struct {
+ uint count; /* # rates in this set */
+ uint8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
+ } rateset; /* supported rates */
+ uint8 channel; /* Channel no. */
+ uint16 atim_window; /* units are Kusec */
+ uint8 dtim_period; /* DTIM period */
+ int16 RSSI; /* receive signal strength (in dBm) */
+ int8 phy_noise; /* noise (in dBm) */
+ uint32 ie_length; /* byte length of Information Elements */
+ /* variable length Information Elements */
+} wl_bss_info_t;
+
+typedef struct wlc_ssid {
+ uint32 SSID_len;
+ uchar SSID[32];
+} wlc_ssid_t;
+
+typedef struct wl_scan_params {
+ wlc_ssid_t ssid; /* default is {0, ""} */
+ struct ether_addr bssid;/* default is bcast */
+ int8 bss_type; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
+ int8 scan_type; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
+ int32 nprobes; /* -1 use default, number of probes per channel */
+ int32 active_time; /* -1 use default, dwell time per channel for active scanning */
+ int32 passive_time; /* -1 use default, dwell time per channel for passive scanning */
+ int32 home_time; /* -1 use default, dwell time for the home channel between channel scans */
+ int32 channel_num; /* 0 use default (all available channels), count of channels in channel_list */
+ uint16 channel_list[1]; /* list of chanspecs */
+} wl_scan_params_t;
+/* size of wl_scan_params not including variable length array */
+#define WL_SCAN_PARAMS_FIXED_SIZE 64
+
+typedef struct wl_scan_results {
+ uint32 buflen;
+ uint32 version;
+ uint32 count;
+ wl_bss_info_t bss_info[1];
+} wl_scan_results_t;
+/* size of wl_scan_results not including variable length array */
+#define WL_SCAN_RESULTS_FIXED_SIZE 12
+
+/* uint32 list */
+typedef struct wl_uint32_list {
+ /* in - # of elements, out - # of entries */
+ uint32 count;
+ /* variable length uint32 list */
+ uint32 element[1];
+} wl_uint32_list_t;
+
+#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */
+
+typedef struct wl_channels_in_country {
+ uint32 buflen;
+ uint32 band;
+ char country_abbrev[WLC_CNTRY_BUF_SZ];
+ uint32 count;
+ uint32 channel[1];
+} wl_channels_in_country_t;
+
+typedef struct wl_country_list {
+ uint32 buflen;
+ uint32 band_set;
+ uint32 band;
+ uint32 count;
+ char country_abbrev[1];
+} wl_country_list_t;
+
+#define WL_RM_TYPE_BASIC 1
+#define WL_RM_TYPE_CCA 2
+#define WL_RM_TYPE_RPI 3
+
+#define WL_RM_FLAG_PARALLEL (1<<0)
+
+#define WL_RM_FLAG_LATE (1<<1)
+#define WL_RM_FLAG_INCAPABLE (1<<2)
+#define WL_RM_FLAG_REFUSED (1<<3)
+
+typedef struct wl_rm_req_elt {
+ int8 type;
+ int8 flags;
+ uint16 chanspec;
+ uint32 token; /* token for this measurement */
+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
+ uint32 tsf_l; /* TSF low 32-bits */
+ uint32 dur; /* TUs */
+} wl_rm_req_elt_t;
+
+typedef struct wl_rm_req {
+ uint32 token; /* overall measurement set token */
+ uint32 count; /* number of measurement reqests */
+ wl_rm_req_elt_t req[1]; /* variable length block of requests */
+} wl_rm_req_t;
+#define WL_RM_REQ_FIXED_LEN 8
+
+typedef struct wl_rm_rep_elt {
+ int8 type;
+ int8 flags;
+ uint16 chanspec;
+ uint32 token; /* token for this measurement */
+ uint32 tsf_h; /* TSF high 32-bits of Measurement start time */
+ uint32 tsf_l; /* TSF low 32-bits */
+ uint32 dur; /* TUs */
+ uint32 len; /* byte length of data block */
+ uint8 data[1]; /* variable length data block */
+} wl_rm_rep_elt_t;
+#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
+
+#define WL_RPI_REP_BIN_NUM 8
+typedef struct wl_rm_rpi_rep {
+ uint8 rpi[WL_RPI_REP_BIN_NUM];
+ int8 rpi_max[WL_RPI_REP_BIN_NUM];
+} wl_rm_rpi_rep_t;
+
+typedef struct wl_rm_rep {
+ uint32 token; /* overall measurement set token */
+ uint32 len; /* length of measurement report block */
+ wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
+} wl_rm_rep_t;
+#define WL_RM_REP_FIXED_LEN 8
+
+
+#if defined(WPAPSK)
+typedef enum sup_auth_status {
+ WLC_SUP_DISCONNECTED = 0,
+ WLC_SUP_CONNECTING,
+ WLC_SUP_IDREQUIRED,
+ WLC_SUP_AUTHENTICATING,
+ WLC_SUP_AUTHENTICATED,
+ WLC_SUP_KEYXCHANGE,
+ WLC_SUP_KEYED
+} sup_auth_status_t;
+#endif /* CCX | WPAPSK */
+
+/* Enumerate crypto algorithms */
+#define CRYPTO_ALGO_OFF 0
+#define CRYPTO_ALGO_WEP1 1
+#define CRYPTO_ALGO_TKIP 2
+#define CRYPTO_ALGO_WEP128 3
+#define CRYPTO_ALGO_AES_CCM 4
+#define CRYPTO_ALGO_AES_OCB_MSDU 5
+#define CRYPTO_ALGO_AES_OCB_MPDU 6
+#define CRYPTO_ALGO_NALG 7
+
+#define WSEC_GEN_MIC_ERROR 0x0001
+#define WSEC_GEN_REPLAY 0x0002
+
+#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
+#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
+#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
+#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
+
+typedef struct wl_wsec_key {
+ uint32 index; /* key index */
+ uint32 len; /* key length */
+ uint8 data[DOT11_MAX_KEY_SIZE]; /* key data */
+ uint32 pad_1[18];
+ uint32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+ uint32 flags; /* misc flags */
+ uint32 pad_2[2];
+ int pad_3;
+ int iv_initialized; /* has IV been initialized already? */
+ int pad_4;
+ /* Rx IV */
+ struct {
+ uint32 hi; /* upper 32 bits of IV */
+ uint16 lo; /* lower 16 bits of IV */
+ } rxiv;
+ uint32 pad_5[2];
+ struct ether_addr ea; /* per station */
+} wl_wsec_key_t;
+
+
+#define WSEC_MIN_PSK_LEN 8
+#define WSEC_MAX_PSK_LEN 64
+
+/* Flag for key material needing passhash'ing */
+#define WSEC_PASSPHRASE (1<<0)
+
+/* recepticle for WLC_SET_WSEC_PMK parameter */
+typedef struct {
+ ushort key_len; /* octets in key material */
+ ushort flags; /* key handling qualification */
+ uint8 key[WSEC_MAX_PSK_LEN]; /* PMK material */
+} wsec_pmk_t;
+
+/* wireless security bitvec */
+#define WEP_ENABLED 1
+#define TKIP_ENABLED 2
+#define AES_ENABLED 4
+#define WSEC_SWFLAG 8
+
+#define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG)
+#define WSEC_HW(wsec) (!WSEC_SW(wsec))
+#define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED)
+#define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED)
+#define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED)
+#define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
+
+typedef struct wl_led_info {
+ uint32 index; /* led index */
+ uint32 behavior;
+ bool activehi;
+} wl_led_info_t;
+
+/*
+ * definitions for driver messages passed from WL to NAS.
+ */
+/* Use this to recognize wpa and 802.1x driver messages. */
+static const uint8 wl_wpa_snap_template[] =
+ { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
+
+#define WL_WPA_MSG_IFNAME_MAX 16
+
+/* WPA driver message */
+typedef struct wl_wpa_header {
+ struct ether_header eth;
+ struct dot11_llc_snap_header snap;
+ uint8 version;
+ uint8 type;
+ /* version 2 additions */
+ char ifname[WL_WPA_MSG_IFNAME_MAX];
+ /* version specific data */
+ /* uint8 data[1]; */
+} wl_wpa_header_t PACKED;
+
+#define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
+
+/* WPA driver message ethertype - private between wlc and nas */
+#define WL_WPA_ETHER_TYPE 0x9999
+
+/* WPA driver message current version */
+#define WL_WPA_MSG_VERSION 2
+
+/* Type field values for the 802.2 driver messages for WPA. */
+#define WLC_ASSOC_MSG 1
+#define WLC_DISASSOC_MSG 2
+#define WLC_PTK_MIC_MSG 3
+#define WLC_GTK_MIC_MSG 4
+
+/* 802.1x driver message */
+typedef struct wl_eapol_header {
+ struct ether_header eth;
+ struct dot11_llc_snap_header snap;
+ uint8 version;
+ uint8 reserved;
+ char ifname[WL_WPA_MSG_IFNAME_MAX];
+ /* version specific data */
+ /* uint8 802_1x_msg[1]; */
+} wl_eapol_header_t PACKED;
+
+#define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
+
+/* 802.1x driver message ethertype - private between wlc and nas */
+#define WL_EAPOL_ETHER_TYPE 0x999A
+
+/* 802.1x driver message current version */
+#define WL_EAPOL_MSG_VERSION 1
+
+/* srom read/write struct passed through ioctl */
+typedef struct {
+ uint byteoff; /* byte offset */
+ uint nbytes; /* number of bytes */
+ uint16 buf[1];
+} srom_rw_t;
+
+/* R_REG and W_REG struct passed through ioctl */
+typedef struct {
+ uint32 byteoff; /* byte offset of the field in d11regs_t */
+ uint32 val; /* read/write value of the field */
+ uint32 size; /* sizeof the field */
+} rw_reg_t;
+
+/* Structure used by GET/SET_ATTEN ioctls */
+typedef struct {
+ uint16 auto_ctrl; /* 1: Automatic control, 0: overriden */
+ uint16 bb; /* Baseband attenuation */
+ uint16 radio; /* Radio attenuation */
+ uint16 txctl1; /* Radio TX_CTL1 value */
+} atten_t;
+
+/* Used to get specific STA parameters */
+typedef struct {
+ uint32 val;
+ struct ether_addr ea;
+} scb_val_t;
+
+/* Event data type */
+typedef struct {
+ uint msg; /* Message (see below) */
+ struct ether_addr *addr; /* Station address (if applicable) */
+ uint status; /* Status code (see below) */
+ uint reason; /* Reason code (if applicable) */
+ uint auth_type; /* WLC_E_AUTH */
+ bool link; /* WLC_E_LINK */
+ bool group; /* WLC_E_MIC_ERROR */
+ bool flush_txq; /* WLC_E_MIC_ERROR */
+} wlc_event_t;
+
+typedef struct {
+ uint16 ver; /* version of this struct */
+ uint16 cap; /* sta's advertized capabilities */
+ uint32 flags; /* flags defined below */
+ uint32 idle; /* time since data pkt rx'd from sta */
+ struct ether_addr ea; /* Station address */
+ wl_rateset_t rateset; /* rateset in use */
+} sta_info_t;
+
+#define WL_STA_INFO_LEN 300
+#define WL_STA_VER 1
+
+/* flags fields */
+#define WL_STA_BRCM 0x01
+#define WL_STA_WME 0x02
+#define WL_STA_ABCAP 0x04
+#define WL_STA_AUTHE 0x08
+#define WL_STA_ASSOC 0x10
+#define WL_STA_AUTHO 0x20
+
+/* Event messages */
+#define WLC_E_SET_SSID 1
+#define WLC_E_JOIN 2
+#define WLC_E_START 3
+#define WLC_E_AUTH 4
+#define WLC_E_AUTH_IND 5
+#define WLC_E_DEAUTH 6
+#define WLC_E_DEAUTH_IND 7
+#define WLC_E_ASSOC 8
+#define WLC_E_ASSOC_IND 9
+#define WLC_E_REASSOC 10
+#define WLC_E_REASSOC_IND 11
+#define WLC_E_DISASSOC 12
+#define WLC_E_DISASSOC_IND 13
+#define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */
+#define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */
+#define WLC_E_GOT_BEACONS 16
+#define WLC_E_LINK 17 /* Link indication */
+#define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */
+#define WLC_E_NDIS_LINK 19 /* NDIS style link indication */
+#define WLC_E_ROAM 20
+#define WLC_E_LAST 21
+
+/* Event status codes */
+#define WLC_E_STATUS_SUCCESS 0
+#define WLC_E_STATUS_FAIL 1
+#define WLC_E_STATUS_TIMEOUT 2
+#define WLC_E_STATUS_NO_NETWORKS 3
+#define WLC_E_STATUS_ABORT 4
+
+typedef struct wlc_event_cb {
+ uint msg; /* Event message or 0 for all */
+ void (*fn)(void *, wlc_event_t *); /* Callback function */
+ void *context; /* Passed to callback function */
+ struct wlc_event_cb *next; /* Next in the chain */
+} wlc_event_cb_t;
+
+/*
+ * Country locale determines which channels are available to us.
+ */
+typedef enum _wlc_locale {
+ WLC_WW = 0, /* Worldwide */
+ WLC_THA, /* Thailand */
+ WLC_ISR, /* Israel */
+ WLC_JDN, /* Jordan */
+ WLC_PRC, /* China */
+ WLC_JPN, /* Japan */
+ WLC_FCC, /* USA */
+ WLC_EUR, /* Europe */
+ WLC_USL, /* US Low Band only */
+ WLC_JPH, /* Japan High Band only */
+ WLC_ALL, /* All the channels in this band */
+ WLC_11D, /* Represents locale recieved by 11d beacons */
+ WLC_LAST_LOCALE,
+ WLC_UNDEFINED_LOCALE = 0xf
+} wlc_locale_t;
+
+/* channel encoding */
+typedef struct channel_info {
+ int hw_channel;
+ int target_channel;
+ int scan_channel;
+} channel_info_t;
+
+/* For ioctls that take a list of MAC addresses */
+struct maclist {
+ uint count; /* number of MAC addresses */
+ struct ether_addr ea[1]; /* variable length array of MAC addresses */
+};
+
+/* get pkt count struct passed through ioctl */
+typedef struct get_pktcnt {
+ uint rx_good_pkt;
+ uint rx_bad_pkt;
+ uint tx_good_pkt;
+ uint tx_bad_pkt;
+} get_pktcnt_t;
+
+/* Linux network driver ioctl encoding */
+typedef struct wl_ioctl {
+ uint cmd; /* common ioctl definition */
+ void *buf; /* pointer to user buffer */
+ uint len; /* length of user buffer */
+ bool set; /* get or set request (optional) */
+ uint used; /* bytes read or written (optional) */
+ uint needed; /* bytes needed (optional) */
+} wl_ioctl_t;
+
+/*
+ * Structure for passing hardware and software
+ * revision info up from the driver.
+ */
+typedef struct wlc_rev_info {
+ uint vendorid; /* PCI vendor id */
+ uint deviceid; /* device id of chip */
+ uint radiorev; /* radio revision */
+ uint chiprev; /* chip revision */
+ uint corerev; /* core revision */
+ uint boardid; /* board identifier (usu. PCI sub-device id) */
+ uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */
+ uint boardrev; /* board revision */
+ uint driverrev; /* driver version */
+ uint ucoderev; /* microcode version */
+ uint bus; /* bus type */
+ uint chipnum; /* chip number */
+} wlc_rev_info_t;
+
+/* check this magic number */
+#define WLC_IOCTL_MAGIC 0x14e46c77
+
+/* bump this number if you change the ioctl interface */
+#define WLC_IOCTL_VERSION 1
+
+/* maximum length buffer required */
+#define WLC_IOCTL_MAXLEN 8192
+
+/* common ioctl definitions */
+#define WLC_GET_MAGIC 0
+#define WLC_GET_VERSION 1
+#define WLC_UP 2
+#define WLC_DOWN 3
+#define WLC_DUMP 6
+#define WLC_GET_MSGLEVEL 7
+#define WLC_SET_MSGLEVEL 8
+#define WLC_GET_PROMISC 9
+#define WLC_SET_PROMISC 10
+#define WLC_GET_RATE 12
+#define WLC_SET_RATE 13
+#define WLC_GET_INSTANCE 14
+#define WLC_GET_FRAG 15
+#define WLC_SET_FRAG 16
+#define WLC_GET_RTS 17
+#define WLC_SET_RTS 18
+#define WLC_GET_INFRA 19
+#define WLC_SET_INFRA 20
+#define WLC_GET_AUTH 21
+#define WLC_SET_AUTH 22
+#define WLC_GET_BSSID 23
+#define WLC_SET_BSSID 24
+#define WLC_GET_SSID 25
+#define WLC_SET_SSID 26
+#define WLC_RESTART 27
+#define WLC_GET_CHANNEL 29
+#define WLC_SET_CHANNEL 30
+#define WLC_GET_SRL 31
+#define WLC_SET_SRL 32
+#define WLC_GET_LRL 33
+#define WLC_SET_LRL 34
+#define WLC_GET_PLCPHDR 35
+#define WLC_SET_PLCPHDR 36
+#define WLC_GET_RADIO 37
+#define WLC_SET_RADIO 38
+#define WLC_GET_PHYTYPE 39
+#define WLC_GET_WEP 42
+#define WLC_SET_WEP 43
+#define WLC_GET_KEY 44
+#define WLC_SET_KEY 45
+#define WLC_SCAN 50
+#define WLC_SCAN_RESULTS 51
+#define WLC_DISASSOC 52
+#define WLC_REASSOC 53
+#define WLC_GET_ROAM_TRIGGER 54
+#define WLC_SET_ROAM_TRIGGER 55
+#define WLC_GET_TXANT 61
+#define WLC_SET_TXANT 62
+#define WLC_GET_ANTDIV 63
+#define WLC_SET_ANTDIV 64
+#define WLC_GET_TXPWR 65
+#define WLC_SET_TXPWR 66
+#define WLC_GET_CLOSED 67
+#define WLC_SET_CLOSED 68
+#define WLC_GET_MACLIST 69
+#define WLC_SET_MACLIST 70
+#define WLC_GET_RATESET 71
+#define WLC_SET_RATESET 72
+#define WLC_GET_LOCALE 73
+#define WLC_SET_LOCALE 74
+#define WLC_GET_BCNPRD 75
+#define WLC_SET_BCNPRD 76
+#define WLC_GET_DTIMPRD 77
+#define WLC_SET_DTIMPRD 78
+#define WLC_GET_SROM 79
+#define WLC_SET_SROM 80
+#define WLC_GET_WEP_RESTRICT 81
+#define WLC_SET_WEP_RESTRICT 82
+#define WLC_GET_COUNTRY 83
+#define WLC_SET_COUNTRY 84
+#define WLC_GET_REVINFO 98
+#define WLC_GET_MACMODE 105
+#define WLC_SET_MACMODE 106
+#define WLC_GET_GMODE 109
+#define WLC_SET_GMODE 110
+#define WLC_GET_CURR_RATESET 114 /* current rateset */
+#define WLC_GET_SCANSUPPRESS 115
+#define WLC_SET_SCANSUPPRESS 116
+#define WLC_GET_AP 117
+#define WLC_SET_AP 118
+#define WLC_GET_EAP_RESTRICT 119
+#define WLC_SET_EAP_RESTRICT 120
+#define WLC_GET_WDSLIST 123
+#define WLC_SET_WDSLIST 124
+#define WLC_GET_RSSI 127
+#define WLC_GET_WSEC 133
+#define WLC_SET_WSEC 134
+#define WLC_GET_BSS_INFO 136
+#define WLC_GET_LAZYWDS 138
+#define WLC_SET_LAZYWDS 139
+#define WLC_GET_BANDLIST 140
+#define WLC_GET_BAND 141
+#define WLC_SET_BAND 142
+#define WLC_GET_SHORTSLOT 144
+#define WLC_GET_SHORTSLOT_OVERRIDE 145
+#define WLC_SET_SHORTSLOT_OVERRIDE 146
+#define WLC_GET_SHORTSLOT_RESTRICT 147
+#define WLC_SET_SHORTSLOT_RESTRICT 148
+#define WLC_GET_GMODE_PROTECTION 149
+#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
+#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
+#define WLC_UPGRADE 152
+#define WLC_GET_MRATE 153
+#define WLC_SET_MRATE 154
+#define WLC_GET_ASSOCLIST 159
+#define WLC_GET_CLK 160
+#define WLC_SET_CLK 161
+#define WLC_GET_UP 162
+#define WLC_OUT 163
+#define WLC_GET_WPA_AUTH 164
+#define WLC_SET_WPA_AUTH 165
+#define WLC_GET_GMODE_PROTECTION_CONTROL 178
+#define WLC_SET_GMODE_PROTECTION_CONTROL 179
+#define WLC_GET_PHYLIST 180
+#define WLC_GET_KEY_SEQ 183
+#define WLC_GET_GMODE_PROTECTION_CTS 198
+#define WLC_SET_GMODE_PROTECTION_CTS 199
+#define WLC_GET_PIOMODE 203
+#define WLC_SET_PIOMODE 204
+#define WLC_SET_LED 209
+#define WLC_GET_LED 210
+#define WLC_GET_CHANNEL_SEL 215
+#define WLC_START_CHANNEL_SEL 216
+#define WLC_GET_VALID_CHANNELS 217
+#define WLC_GET_FAKEFRAG 218
+#define WLC_SET_FAKEFRAG 219
+#define WLC_GET_WET 230
+#define WLC_SET_WET 231
+#define WLC_GET_KEY_PRIMARY 235
+#define WLC_SET_KEY_PRIMARY 236
+#define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */
+#define WLC_SET_CS_SCAN_TIMER 248
+#define WLC_GET_CS_SCAN_TIMER 249
+#define WLC_CURRENT_PWR 256
+#define WLC_GET_CHANNELS_IN_COUNTRY 260
+#define WLC_GET_COUNTRY_LIST 261
+#define WLC_GET_VAR 262 /* get value of named variable */
+#define WLC_SET_VAR 263 /* set named variable to value */
+#define WLC_NVRAM_GET 264
+#define WLC_NVRAM_SET 265
+#define WLC_SET_WSEC_PMK 268
+#define WLC_GET_AUTH_MODE 269
+#define WLC_SET_AUTH_MODE 270
+#define WLC_LAST 273 /* do not change - use get_var/set_var */
+
+/*
+ * Minor kludge alert:
+ * Duplicate a few definitions that irelay requires from epiioctl.h here
+ * so caller doesn't have to include this file and epiioctl.h .
+ * If this grows any more, it would be time to move these irelay-specific
+ * definitions out of the epiioctl.h and into a separate driver common file.
+ */
+#ifndef EPICTRL_COOKIE
+#define EPICTRL_COOKIE 0xABADCEDE
+#endif
+
+/* vx wlc ioctl's offset */
+#define CMN_IOCTL_OFF 0x180
+
+/*
+ * custom OID support
+ *
+ * 0xFF - implementation specific OID
+ * 0xE4 - first byte of Broadcom PCI vendor ID
+ * 0x14 - second byte of Broadcom PCI vendor ID
+ * 0xXX - the custom OID number
+ */
+
+/* begin 0x1f values beyond the start of the ET driver range. */
+#define WL_OID_BASE 0xFFE41420
+
+/* NDIS overrides */
+#define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
+
+#define WL_DECRYPT_STATUS_SUCCESS 1
+#define WL_DECRYPT_STATUS_FAILURE 2
+#define WL_DECRYPT_STATUS_UNKNOWN 3
+
+/* allows user-mode app to poll the status of USB image upgrade */
+#define WLC_UPGRADE_SUCCESS 0
+#define WLC_UPGRADE_PENDING 1
+
+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+#define WL_RADIO_SW_DISABLE (1<<0)
+#define WL_RADIO_HW_DISABLE (1<<1)
+
+/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
+#define WL_TXPWR_OVERRIDE (1<<31)
+
+
+/* Bus types */
+#define WL_SB_BUS 0 /* Silicon Backplane */
+#define WL_PCI_BUS 1 /* PCI target */
+#define WL_PCMCIA_BUS 2 /* PCMCIA target */
+
+/* band types */
+#define WLC_BAND_AUTO 0 /* auto-select */
+#define WLC_BAND_A 1 /* "a" band (5 Ghz) */
+#define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */
+
+/* MAC list modes */
+#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
+#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
+#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
+
+/*
+ *
+ */
+#define GMODE_LEGACY_B 0
+#define GMODE_AUTO 1
+#define GMODE_ONLY 2
+#define GMODE_B_DEFERRED 3
+#define GMODE_PERFORMANCE 4
+#define GMODE_LRS 5
+#define GMODE_MAX 6
+
+/* values for PLCPHdr_override */
+#define WLC_PLCP_AUTO -1
+#define WLC_PLCP_SHORT 0
+#define WLC_PLCP_LONG 1
+
+/* values for g_protection_override */
+#define WLC_G_PROTECTION_AUTO -1
+#define WLC_G_PROTECTION_OFF 0
+#define WLC_G_PROTECTION_ON 1
+
+/* values for g_protection_control */
+#define WLC_G_PROTECTION_CTL_OFF 0
+#define WLC_G_PROTECTION_CTL_LOCAL 1
+#define WLC_G_PROTECTION_CTL_OVERLAP 2
+
+/* Values for PM */
+#define PM_OFF 0
+#define PM_MAX 1
+#define PM_FAST 2
+
+
+
+
+
+/* 802.11h enforcement levels */
+#define SPECT_MNGMT_OFF 0 /* 11h disabled */
+#define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */
+ /* when 11h is enabled */
+#define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */
+
+
+
+/* max # of leds supported by GPIO (gpio pin# == led index#) */
+#define WL_LED_NUMGPIO 16 /* gpio 0-15 */
+
+/* led per-pin behaviors */
+#define WL_LED_OFF 0 /* always off */
+#define WL_LED_ON 1 /* always on */
+#define WL_LED_ACTIVITY 2 /* activity */
+#define WL_LED_RADIO 3 /* radio enabled */
+#define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */
+#define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */
+#define WL_LED_BGMODE 6 /* on if gmode, off if bmode */
+#define WL_LED_WI1 7
+#define WL_LED_WI2 8
+#define WL_LED_WI3 9
+#define WL_LED_ASSOC 10 /* associated state indicator */
+#define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */
+#define WL_LED_NUMBEHAVIOR 12
+
+/* led behavior numeric value format */
+#define WL_LED_BEH_MASK 0x7f /* behavior mask */
+#define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */
+
+
+/* WDS link local endpoint WPA role */
+#define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
+#define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
+#define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
+
+/* afterburner_override */
+#define ABO_AUTO -1 /* auto - no override */
+#define ABO_OFF 0 /* force afterburner off */
+#define ABO_ON 1 /* force afterburner on */
+
+#undef PACKED
+
+#endif /* _wlioctl_h_ */
--- /dev/null
+/*
+ * Broadcom wireless network adapter utility functions
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#ifndef _wlutils_h_
+#define _wlutils_h_
+
+#include <typedefs.h>
+#include <wlioctl.h>
+
+/*
+ * Pass a wlioctl request to the specified interface.
+ * @param name interface name
+ * @param cmd WLC_GET_MAGIC <= cmd < WLC_LAST
+ * @param buf buffer for passing in and/or receiving data
+ * @param len length of buf
+ * @return >= 0 if successful or < 0 otherwise
+ */
+extern int wl_ioctl(char *name, int cmd, void *buf, int len);
+
+/*
+ * Get the MAC (hardware) address of the specified interface.
+ * @param name interface name
+ * @param hwaddr 6-byte buffer for receiving address
+ * @return >= 0 if successful or < 0 otherwise
+ */
+extern int wl_hwaddr(char *name, unsigned char *hwaddr);
+
+/*
+ * Probe the specified interface.
+ * @param name interface name
+ * @return >= 0 if a Broadcom wireless device or < 0 otherwise
+ */
+extern int wl_probe(char *name);
+
+/*
+ * Set/Get named variable.
+ * @param name interface name
+ * @param var variable name
+ * @param val variable value/buffer
+ * @param len variable value/buffer length
+ * @return success == 0, failure != 0
+ */
+extern int wl_set_val(char *name, char *var, void *val, int len);
+extern int wl_get_val(char *name, char *var, void *val, int len);
+extern int wl_set_int(char *name, char *var, int val);
+extern int wl_get_int(char *name, char *var, int *val);
+
+#endif /* _wlutils_h_ */
--- /dev/null
+#
+# Linux router shared code Makefile
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+#
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# $Id$
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libnvram
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+
+EXTRA_CFLAGS := -c -I. -I../include
+
+all: compile
+
+define OBJ_template
+$(PKG_BUILD_DIR)/$(1): $(PKG_BUILD_DIR)
+ $(TARGET_CC) $(TARGET_CFLAGS) $(EXTRA_CFLAGS) -o $$@ $$(patsubst %.o,%.c,$(1))
+endef
+
+OBJS := nvram_linux.o nvram_convert.o main.o
+LIBNVRAM_OBJS:= $(PKG_BUILD_DIR)/nvram_linux.o $(PKG_BUILD_DIR)/nvram_convert.o
+$(foreach obj,$(OBJS),$(eval $(call OBJ_template,$(obj))))
+
+$(PKG_BUILD_DIR):
+ mkdir -p $(PKG_BUILD_DIR)
+
+$(PKG_BUILD_DIR)/nvram: $(PKG_BUILD_DIR)/main.o
+ $(TARGET_CC) $(TARGET_CFLAGS) -o $@ $^ -L$(PKG_BUILD_DIR) -lnvram
+
+$(PKG_BUILD_DIR)/libnvram.so: $(LIBNVRAM_OBJS)
+ $(TARGET_CC) -shared -o $@ $^
+
+$(TARGET_DIR)/usr/lib/libnvram.so: $(PKG_BUILD_DIR)/libnvram.so
+ install -m 644 $< $@
+ install -m 644 $< $(STAGING_DIR)/lib/libnvram.so
+ $(STRIP) $@
+
+$(TARGET_DIR)/usr/sbin/nvram: $(PKG_BUILD_DIR)/nvram
+ mkdir -p $(TARGET_DIR)/usr/sbin
+ install -m 644 $< $@
+ $(STRIP) $@
+
+compile: $(PKG_BUILD_DIR)/libnvram.so $(PKG_BUILD_DIR)/nvram
+install: $(TARGET_DIR)/usr/lib/libnvram.so $(TARGET_DIR)/usr/sbin/nvram
+
+clean:
+ rm -rf $(PKG_BUILD_DIR)
--- /dev/null
+/*
+ * Frontend command-line utility for Linux NVRAM layer
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <typedefs.h>
+#include <bcmnvram.h>
+
+static void
+usage(void)
+{
+ fprintf(stderr, "usage: nvram [get name] [set name=value] [unset name] [show]\n");
+ exit(0);
+}
+
+/* NVRAM utility */
+int
+main(int argc, char **argv)
+{
+ char *name, *value, buf[NVRAM_SPACE];
+ int size;
+
+ /* Skip program name */
+ --argc;
+ ++argv;
+
+ if (!*argv)
+ usage();
+
+ /* Process the remaining arguments. */
+ for (; *argv; argv++) {
+ if (!strncmp(*argv, "get", 3)) {
+ if (*++argv) {
+ if ((value = nvram_get(*argv)))
+ puts(value);
+ }
+ }
+ else if (!strncmp(*argv, "set", 3)) {
+ if (*++argv) {
+ strncpy(value = buf, *argv, sizeof(buf));
+ name = strsep(&value, "=");
+ nvram_set(name, value);
+ }
+ }
+ else if (!strncmp(*argv, "unset", 5)) {
+ if (*++argv)
+ nvram_unset(*argv);
+ }
+ else if (!strncmp(*argv, "commit", 5)) {
+ nvram_commit();
+ }
+ else if (!strncmp(*argv, "show", 4) ||
+ !strncmp(*argv, "getall", 6)) {
+ nvram_getall(buf, sizeof(buf));
+ for (name = buf; *name; name += strlen(name) + 1)
+ puts(name);
+ size = sizeof(struct nvram_header) + (int) name - (int) buf;
+ fprintf(stderr, "size: %d bytes (%d left)\n", size, NVRAM_SPACE - size);
+ }
+ if (!*argv)
+ break;
+ }
+
+ return 0;
+}
--- /dev/null
+
+#define WL(a) "wl_"a
+#define WL0(a) "wl0_"a
+#define D11G(a) "d11g_"a
+
+#define PPP(a) "ppp_"a
+#define PPPOE(a) "pppoe_"a
+
+struct nvram_convert {
+ char *name; // for WEB
+ char *wl0_name; // for driver
+ char *d11g_name; // for old nv name
+};
+
+struct nvram_convert nvram_converts[] = {
+ // Bellow change from 3.11.48.7
+ { WL("ssid"), WL0("ssid"), ""},
+ { WL("radio"), WL0("mode"), ""},
+ { WL("mode"), WL0("mode"), ""},
+ { WL("wds"), WL0("wds"), ""},
+ { WL("auth"), WL0("auth"), ""},
+ { WL("key"), WL0("key"), ""},
+ { WL("key1"), WL0("key1"), ""},
+ { WL("key2"), WL0("key2"), ""},
+ { WL("key3"), WL0("key3"), ""},
+ { WL("key4"), WL0("key4"), ""},
+ { WL("maclist"), WL0("maclist"), ""},
+ { WL("channel"), WL0("channel"), D11G("channel")},
+ { WL("rateset"), WL0("rateset"), D11G("rateset")},
+ { WL("rts"), WL0("rts"), D11G("rts")},
+ { WL("bcn"), WL0("bcn"), D11G("bcn")},
+ { WL("gmode"), WL0("gmode"), "d11g_mode"},
+ { WL("unit"), WL0("unit"), ""},
+ { WL("ifname"), WL0("ifname"), ""},
+ { WL("phytype"), WL0("phytype"), ""},
+ { WL("country"), WL0("country"), ""},
+ { WL("closed"), WL0("closed"), ""},
+ { WL("lazywds"), WL0("lazywds"), ""},
+ { WL("wep"), WL0("wep"), ""},
+ { WL("macmode"), WL0("macmode"), ""},
+ { WL("rate"), WL0("rate"), D11G("rate")},
+ { WL("frag"), WL0("frag"), D11G("frag")},
+ { WL("dtim"), WL0("dtim"), D11G("dtim")},
+ { WL("plcphdr"), WL0("plcphdr"), ""},
+ { WL("gmode_protection"), WL0("gmode_protection"), ""},
+ { WL("radio"), WL0("radio"), ""},
+ // Bellow change from 3.21.9.0
+ { WL("auth_mode"), WL0("auth_mode"), ""},
+ { WL("radius_ipaddr"), WL0("radius_ipaddr"), ""},
+ { WL("radius_port"), WL0("radius_port"), ""},
+ { WL("radius_key"), WL0("radius_key"), ""},
+ { WL("wpa_psk"), WL0("wpa_psk"), ""},
+ { WL("wpa_gtk_rekey"), WL0("wpa_gtk_rekey"), ""},
+ { WL("frameburst"), WL0("frameburst"), ""},
+ { WL("crypto"), WL0("crypto"), ""},
+ { WL("ap_isolate"), WL0("ap_isolate"), ""},
+ { WL("afterburner"), WL0("afterburner"), ""},
+ // for PPPoE
+ { PPP("username"), PPPOE("username"), ""},
+ { PPP("passwd"), PPPOE("passwd"), ""},
+ { PPP("idletime"), PPPOE("idletime"), ""},
+ { PPP("keepalive"), PPPOE("keepalive"), ""},
+ { PPP("demand"), PPPOE("demand"), ""},
+ { PPP("service"), PPPOE("service"), ""},
+ { PPP("ac"), PPPOE("ac"), ""},
+ { PPP("static"), PPPOE("static"), ""},
+ { PPP("static_ip"), PPPOE("static_ip"), ""},
+ { PPP("username_1"), PPPOE("username_1"), ""},
+ { PPP("passwd_1"), PPPOE("passwd_1"), ""},
+ { PPP("idletime_1"), PPPOE("idletime_1"), ""},
+ { PPP("keepalive_1"), PPPOE("keepalive_1"), ""},
+ { PPP("demand_1"), PPPOE("demand_1"), ""},
+ { PPP("service_1"), PPPOE("service_1"), ""},
+ { PPP("ac_1"), PPPOE("ac_1"), ""},
+
+ { 0, 0, 0},
+};
--- /dev/null
+
+struct nvram_convert {
+ char *name;
+ char *wl0_name;
+ char *d11g_name;
+};
+
--- /dev/null
+/*
+ * NVRAM variable manipulation (Linux user mode half)
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <error.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <sys/mman.h>
+
+#include <typedefs.h>
+#include <bcmnvram.h>
+#include <nvram_convert.h>
+#include <shutils.h>
+#include <utils.h>
+
+#define PATH_DEV_NVRAM "/dev/nvram"
+
+/* Globals */
+static int nvram_fd = -1;
+static char *nvram_buf = NULL;
+int check_action(void);
+int file_to_buf(char *path, char *buf, int len);
+
+int
+nvram_init(void *unused)
+{
+ if ((nvram_fd = open(PATH_DEV_NVRAM, O_RDWR)) < 0)
+ goto err;
+
+ /* Map kernel string buffer into user space */
+ if ((nvram_buf = mmap(NULL, NVRAM_SPACE, PROT_READ, MAP_SHARED, nvram_fd, 0)) == MAP_FAILED) {
+ close(nvram_fd);
+ nvram_fd = -1;
+ goto err;
+ }
+
+ return 0;
+
+ err:
+ perror(PATH_DEV_NVRAM);
+ return errno;
+}
+
+char *
+nvram_get(const char *name)
+{
+ size_t count = strlen(name) + 1;
+ char tmp[100], *value;
+ unsigned long *off = (unsigned long *) tmp;
+
+ if (nvram_fd < 0)
+ if (nvram_init(NULL))
+ return NULL;
+
+ if (count > sizeof(tmp)) {
+ if (!(off = malloc(count)))
+ return NULL;
+ }
+
+ /* Get offset into mmap() space */
+ strcpy((char *) off, name);
+
+ count = read(nvram_fd, off, count);
+
+ if (count == sizeof(unsigned long))
+ value = &nvram_buf[*off];
+ else
+ value = NULL;
+
+ if (count < 0)
+ perror(PATH_DEV_NVRAM);
+
+ if (off != (unsigned long *) tmp)
+ free(off);
+
+ return value;
+}
+
+int
+nvram_getall(char *buf, int count)
+{
+ int ret;
+
+ if (nvram_fd < 0)
+ if ((ret = nvram_init(NULL)))
+ return ret;
+
+ if (count == 0)
+ return 0;
+
+ /* Get all variables */
+ *buf = '\0';
+
+ ret = read(nvram_fd, buf, count);
+
+ if (ret < 0)
+ perror(PATH_DEV_NVRAM);
+
+ return (ret == count) ? 0 : ret;
+}
+
+static int
+_nvram_set(const char *name, const char *value)
+{
+ size_t count = strlen(name) + 1;
+ char tmp[100], *buf = tmp;
+ int ret;
+
+ if (nvram_fd < 0)
+ if ((ret = nvram_init(NULL)))
+ return ret;
+
+ /* Unset if value is NULL */
+ if (value)
+ count += strlen(value) + 1;
+
+ if (count > sizeof(tmp)) {
+ if (!(buf = malloc(count)))
+ return -ENOMEM;
+ }
+
+ if (value)
+ sprintf(buf, "%s=%s", name, value);
+ else
+ strcpy(buf, name);
+
+ ret = write(nvram_fd, buf, count);
+
+ if (ret < 0)
+ perror(PATH_DEV_NVRAM);
+
+ if (buf != tmp)
+ free(buf);
+
+ return (ret == count) ? 0 : ret;
+}
+
+int
+nvram_set(const char *name, const char *value)
+{
+ extern struct nvram_convert nvram_converts[];
+ struct nvram_convert *v;
+ int ret;
+
+ ret = _nvram_set(name, value);
+
+ for(v = nvram_converts ; v->name ; v++) {
+ if(!strcmp(v->name, name)){
+ if(strcmp(v->wl0_name,"")) _nvram_set(v->wl0_name, value);
+ if(strcmp(v->d11g_name,"")) _nvram_set(v->d11g_name, value);
+ }
+ }
+
+ return ret;
+}
+
+int
+nvram_unset(const char *name)
+{
+ return _nvram_set(name, NULL);
+}
+
+int
+nvram_commit(void)
+{
+ int ret;
+
+ cprintf("nvram_commit(): start\n");
+
+ if((check_action() == ACT_IDLE) ||
+ (check_action() == ACT_SW_RESTORE) ||
+ (check_action() == ACT_HW_RESTORE)){
+ if (nvram_fd < 0)
+ if ((ret = nvram_init(NULL)))
+ return ret;
+
+ ret = ioctl(nvram_fd, NVRAM_MAGIC, NULL);
+
+ if (ret < 0)
+ perror(PATH_DEV_NVRAM);
+
+ cprintf("nvram_commit(): end\n");
+ }
+ else
+ cprintf("nvram_commit(): nothing to do...\n");
+
+ return ret;
+}
+
+int file2nvram(char *filename, char *varname) {
+ FILE *fp;
+ int c,count;
+ int i=0,j=0;
+ char mem[10000],buf[30000];
+
+ if ( !(fp=fopen(filename,"rb") ))
+ return 0;
+
+ count=fread(mem,1,sizeof(mem),fp);
+ fclose(fp);
+ for (j=0;j<count;j++) {
+ if (i > sizeof(buf)-3 )
+ break;
+ c=mem[j];
+ if (c >= 32 && c <= 126 && c != '\\' && c != '~') {
+ buf[i++]=(unsigned char) c;
+ } else if (c==0) {
+ buf[i++]='~';
+ } else {
+ buf[i++]='\\';
+ sprintf(buf+i,"%02X",c);
+ i+=2;
+ }
+ }
+ if (i==0) return 0;
+ buf[i]=0;
+ //fprintf(stderr,"================ > file2nvram %s = [%s] \n",varname,buf);
+ nvram_set(varname,buf);
+ //nvram_commit(); //Barry adds for test
+}
+
+int nvram2file(char *varname, char *filename) {
+ FILE *fp;
+ int c,tmp;
+ int i=0,j=0;
+ char *buf;
+ char mem[10000];
+
+ if ( !(fp=fopen(filename,"wb") ))
+ return 0;
+
+ buf=strdup(nvram_safe_get(varname));
+ //fprintf(stderr,"=================> nvram2file %s = [%s] \n",varname,buf);
+ while ( buf[i] && j < sizeof(mem)-3 ) {
+ if (buf[i] == '\\') {
+ i++;
+ tmp=buf[i+2];
+ buf[i+2]=0;
+ sscanf(buf+i,"%02X",&c);
+ buf[i+2]=tmp;
+ i+=2;
+ mem[j]=c;j++;
+ } else if (buf[i] == '~') {
+ mem[j]=0;j++;
+ i++;
+ } else {
+ mem[j]=buf[i];j++;
+ i++;
+ }
+ }
+ if (j<=0) return j;
+ j=fwrite(mem,1,j,fp);
+ fclose(fp);
+ free(buf);
+ return j;
+}
+
+int
+check_action(void)
+{
+ char buf[80] = "";
+
+ if(file_to_buf(ACTION_FILE, buf, sizeof(buf))){
+ if(!strcmp(buf, "ACT_TFTP_UPGRADE")){
+ cprintf("Upgrading from tftp now, quiet exit....\n");
+ return ACT_TFTP_UPGRADE;
+ }
+ else if(!strcmp(buf, "ACT_WEBS_UPGRADE")){
+ cprintf("Upgrading from web (https) now, quiet exit....\n");
+ return ACT_WEBS_UPGRADE;
+ }
+ else if(!strcmp(buf, "ACT_WEB_UPGRADE")){
+ cprintf("Upgrading from web (http) now, quiet exit....\n");
+ return ACT_WEB_UPGRADE;
+ }
+ else if(!strcmp(buf, "ACT_SW_RESTORE")){
+ cprintf("Receive restore command from web, quiet exit....\n");
+ return ACT_SW_RESTORE;
+ }
+ else if(!strcmp(buf, "ACT_HW_RESTORE")){
+ cprintf("Receive restore commond from resetbutton, quiet exit....\n");
+ return ACT_HW_RESTORE;
+ }
+ }
+ //fprintf(stderr, "Waiting for upgrading....\n");
+ return ACT_IDLE;
+}
+
+int
+file_to_buf(char *path, char *buf, int len)
+{
+ FILE *fp;
+
+ memset(buf, 0 , len);
+
+ if ((fp = fopen(path, "r"))) {
+ fgets(buf, len, fp);
+ fclose(fp);
+ return 1;
+ }
+
+ return 0;
+}
--- /dev/null
+#
+# Linux router shared code Makefile
+#
+# Copyright 2001-2003, Broadcom Corporation
+# All Rights Reserved.
+#
+# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+#
+# $Id$
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libshared
+PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)
+
+EXTRA_CFLAGS := -c -I. -I../include
+
+all: compile
+
+LIBSHARED_OBJS:=
+define OBJ_template
+$(PKG_BUILD_DIR)/$(1): $(PKG_BUILD_DIR)
+ $(TARGET_CC) $(TARGET_CFLAGS) $(EXTRA_CFLAGS) -o $$@ $$(patsubst %.o,%.c,$(1))
+LIBSHARED_OBJS += $(PKG_BUILD_DIR)/$(1)
+endef
+
+OBJS := shutils.o wl.o wl_linux.o defaults.o linux_timer.o
+$(foreach obj,$(OBJS),$(eval $(call OBJ_template,$(obj))))
+
+
+$(PKG_BUILD_DIR):
+ mkdir -p $(PKG_BUILD_DIR)
+
+$(PKG_BUILD_DIR)/libshared.so: $(LIBSHARED_OBJS)
+ $(TARGET_CC) -shared -o $@ $^
+
+$(TARGET_DIR)/usr/lib/libshared.so: $(PKG_BUILD_DIR)/libshared.so
+ install -m 644 $^ $@
+ install -m 644 $^ $(STAGING_DIR)/lib/libshared.so
+ $(STRIP) $@
+
+compile: $(PKG_BUILD_DIR)/libshared.so
+install: $(TARGET_DIR)/usr/lib/libshared.so
+
+clean:
+ rm -rf $(PKG_BUILD_DIR)
--- /dev/null
+/*
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Low resolution timer interface. Timer handlers may be called
+ * in a deferred manner in a different task context after the
+ * timer expires or in the task context from which the timer
+ * was created, depending on the implementation.
+ *
+ * $Id$
+ */
+#ifndef __bcmtimer_h__
+#define __bcmtimer_h__
+
+/* ANSI headers */
+#include <time.h>
+
+/* timer ID */
+typedef unsigned int bcm_timer_module_id;
+typedef unsigned int bcm_timer_id;
+
+/* timer callback */
+typedef void (*bcm_timer_cb)(bcm_timer_id id, int data);
+
+/* OS-independant interfaces, applications should call these functions only */
+int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id);
+int bcm_timer_module_cleanup(bcm_timer_module_id module_id);
+int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id);
+int bcm_timer_delete(bcm_timer_id timer_id);
+int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *value);
+int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *value);
+int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data);
+int bcm_timer_cancel(bcm_timer_id timer_id);
+
+#endif /* #ifndef __bcmtimer_h__ */
--- /dev/null
+/*
+ * Router default NVRAM values
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <epivers.h>
+#include <string.h>
+#include <bcmnvram.h>
+#include <typedefs.h>
+#include <wlioctl.h>
+
+#define XSTR(s) STR(s)
+#define STR(s) #s
+
+struct nvram_tuple router_defaults[] = {
+ /* OS parameters */
+ { "os_name", "", 0 }, /* OS name string */
+ { "os_version", EPI_VERSION_STR, 0 }, /* OS revision */
+ { "os_date", __DATE__, 0 }, /* OS date */
+
+ /* Miscellaneous parameters */
+ { "timer_interval", "3600", 0 }, /* Timer interval in seconds */
+ { "ntp_server", "192.5.41.40 192.5.41.41 133.100.9.2", 0 }, /* NTP server */
+ { "time_zone", "PST8PDT", 0 }, /* Time zone (GNU TZ format) */
+ { "log_level", "0", 0 }, /* Bitmask 0:off 1:denied 2:accepted */
+ { "upnp_enable", "0", 0 }, /* Start UPnP */
+ { "ezc_enable", "1", 0 }, /* Enable EZConfig updates */
+ { "ezc_version", "1", 0 }, /* EZConfig version */
+ { "is_default", "1", 0 }, /* is it default setting: 1:yes 0:no*/
+ { "os_server", "", 0 }, /* URL for getting upgrades */
+ { "stats_server", "", 0 }, /* URL for posting stats */
+ { "console_loglevel", "1", 0 }, /* Kernel panics only */
+
+ /* Big switches */
+ { "router_disable", "0", 0 }, /* lan_proto=static lan_stp=0 wan_proto=disabled */
+ { "fw_disable", "0", 0 }, /* Disable firewall (allow new connections from the WAN) */
+
+ { "log_ipaddr", "", 0 }, /* syslog recipient */
+
+ /* LAN H/W parameters */
+ { "lan_ifname", "", 0 }, /* LAN interface name */
+ { "lan_ifnames", "", 0 }, /* Enslaved LAN interfaces */
+ { "lan_hwnames", "", 0 }, /* LAN driver names (e.g. et0) */
+ { "lan_hwaddr", "", 0 }, /* LAN interface MAC address */
+
+ /* LAN TCP/IP parameters */
+ { "lan_proto", "dhcp", 0 }, /* [static|dhcp] */
+ { "lan_ipaddr", "192.168.1.1", 0 }, /* LAN IP address */
+ { "lan_netmask", "255.255.255.0", 0 }, /* LAN netmask */
+ { "lan_stp", "0", 0 }, /* LAN spanning tree protocol */
+ { "lan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */
+ { "lan_domain", "", 0 }, /* LAN domain name */
+ { "lan_lease", "86400", 0 }, /* LAN lease time in seconds */
+
+ /* WAN H/W parameters */
+ { "wan_ifname", "", 0 }, /* WAN interface name */
+ { "wan_ifnames", "", 0 }, /* WAN interface names */
+ { "wan_hwname", "", 0 }, /* WAN driver name (e.g. et1) */
+ { "wan_hwaddr", "", 0 }, /* WAN interface MAC address */
+
+ /* WAN TCP/IP parameters */
+ { "wan_proto", "dhcp", 0 }, /* [static|dhcp|pppoe|disabled] */
+ { "wan_ipaddr", "0.0.0.0", 0 }, /* WAN IP address */
+ { "wan_netmask", "0.0.0.0", 0 }, /* WAN netmask */
+ { "wan_gateway", "0.0.0.0", 0 }, /* WAN gateway */
+ { "wan_dns", "", 0 }, /* x.x.x.x x.x.x.x ... */
+ { "wan_wins", "", 0 }, /* x.x.x.x x.x.x.x ... */
+ { "wan_hostname", "", 0 }, /* WAN hostname */
+ { "wan_domain", "", 0 }, /* WAN domain name */
+ { "wan_lease", "86400", 0 }, /* WAN lease time in seconds */
+
+ /* PPPoE parameters */
+ { "wan_pppoe_ifname", "", 0 }, /* PPPoE enslaved interface */
+ { "wan_pppoe_username", "", 0 }, /* PPP username */
+ { "wan_pppoe_passwd", "", 0 }, /* PPP password */
+ { "wan_pppoe_idletime", "60", 0 }, /* Dial on demand max idle time (seconds) */
+ { "wan_pppoe_keepalive", "0", 0 }, /* Restore link automatically */
+ { "wan_pppoe_demand", "0", 0 }, /* Dial on demand */
+ { "wan_pppoe_mru", "1492", 0 }, /* Negotiate MRU to this value */
+ { "wan_pppoe_mtu", "1492", 0 }, /* Negotiate MTU to the smaller of this value or the peer MRU */
+ { "wan_pppoe_service", "", 0 }, /* PPPoE service name */
+ { "wan_pppoe_ac", "", 0 }, /* PPPoE access concentrator name */
+
+ /* Misc WAN parameters */
+ { "wan_desc", "", 0 }, /* WAN connection description */
+ { "wan_route", "", 0 }, /* Static routes (ipaddr:netmask:gateway:metric:ifname ...) */
+ { "wan_primary", "0", 0 }, /* Primary wan connection */
+
+ { "wan_unit", "0", 0 }, /* Last configured connection */
+
+ /* Filters */
+ { "filter_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */
+ { "filter_macmode", "deny", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */
+ { "filter_client0", "", 0 }, /* [lan_ipaddr0-lan_ipaddr1|*]:lan_port0-lan_port1,proto,enable,day_start-day_end,sec_start-sec_end,desc */
+
+ /* Port forwards */
+ { "dmz_ipaddr", "", 0 }, /* x.x.x.x (equivalent to 0-60999>dmz_ipaddr:0-60999) */
+ { "forward_port0", "", 0 }, /* wan_port0-wan_port1>lan_ipaddr:lan_port0-lan_port1[:,]proto[:,]enable[:,]desc */
+ { "autofw_port0", "", 0 }, /* out_proto:out_port,in_proto:in_port0-in_port1>to_port0-to_port1,enable,desc */
+
+ /* DHCP server parameters */
+ { "dhcp_start", "192.168.1.100", 0 }, /* First assignable DHCP address */
+ { "dhcp_end", "192.168.1.150", 0 }, /* Last assignable DHCP address */
+ { "dhcp_domain", "wan", 0 }, /* Use WAN domain name first if available (wan|lan) */
+ { "dhcp_wins", "wan", 0 }, /* Use WAN WINS first if available (wan|lan) */
+
+ /* Web server parameters */
+ { "http_username", "", 0 }, /* Username */
+ { "http_passwd", "admin", 0 }, /* Password */
+ { "http_wanport", "", 0 }, /* WAN port to listen on */
+ { "http_lanport", "80", 0 }, /* LAN port to listen on */
+
+ /* Wireless parameters */
+ { "wl_ifname", "", 0 }, /* Interface name */
+ { "wl_hwaddr", "", 0 }, /* MAC address */
+ { "wl_phytype", "g", 0 }, /* Current wireless band ("a" (5 GHz), "b" (2.4 GHz), or "g" (2.4 GHz)) */
+ { "wl_corerev", "", 0 }, /* Current core revision */
+ { "wl_phytypes", "", 0 }, /* List of supported wireless bands (e.g. "ga") */
+ { "wl_radioids", "", 0 }, /* List of radio IDs */
+ { "wl_ssid", "linksys", 0 }, /* Service set ID (network name) */
+ { "wl_country", "", 0 }, /* Country (default obtained from driver) */
+ { "wl_radio", "1", 0 }, /* Enable (1) or disable (0) radio */
+ { "wl_closed", "0", 0 }, /* Closed (hidden) network */
+ { "wl_ap_isolate", "0", 0 }, /* AP isolate mode */
+ { "wl_mode", "ap", 0 }, /* AP mode (ap|sta|wds) */
+ { "wl_lazywds", "1", 0 }, /* Enable "lazy" WDS mode (0|1) */
+ { "wl_wds", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */
+ { "wl_wep", "disabled", 0 }, /* WEP data encryption (enabled|disabled) */
+ { "wl_auth", "0", 0 }, /* Shared key authentication optional (0) or required (1) */
+ { "wl_key", "1", 0 }, /* Current WEP key */
+ { "wl_key1", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
+ { "wl_key2", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
+ { "wl_key3", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
+ { "wl_key4", "", 0 }, /* 5/13 char ASCII or 10/26 char hex */
+ { "wl_maclist", "", 0 }, /* xx:xx:xx:xx:xx:xx ... */
+ { "wl_macmode", "disabled", 0 }, /* "allow" only, "deny" only, or "disabled" (allow all) */
+ { "wl_channel", "11", 0 }, /* Channel number */
+ { "wl_rate", "0", 0 }, /* Rate (bps, 0 for auto) */
+ { "wl_rateset", "default", 0 }, /* "default" or "all" or "12" */
+ { "wl_frag", "2346", 0 }, /* Fragmentation threshold */
+ { "wl_rts", "2347", 0 }, /* RTS threshold */
+ { "wl_dtim", "1", 0 }, /* DTIM period */
+ { "wl_bcn", "100", 0 }, /* Beacon interval */
+ { "wl_plcphdr", "long", 0 }, /* 802.11b PLCP preamble type */
+ { "wl_net_mode", "mixed", 0 }, /* 54g mode */
+ { "wl_gmode", "6", 0 }, /* 54g mode */
+ { "wl_gmode_protection", "auto", 0 }, /* 802.11g RTS/CTS protection (off|auto) */
+ { "wl_afterburner", "auto", 0 }, /* AfterBurner */
+ { "wl_frameburst", "off", 0 }, /* BRCM Frambursting mode (off|on) */
+ { "wl_antdiv", "-1", 0 }, /* Antenna Diversity (-1|0|1|3) */
+ { "wl_infra", "1", 0 }, /* Network Type (BSS/IBSS) */
+
+ /* WPA parameters */
+ { "security_mode", "open", 0 },
+ { "wl_auth_mode", "open", 0 }, /* Network authentication mode (open|shared|radius|wpa|psk) */
+ { "wl_wpa_psk", "", 0 }, /* WPA pre-shared key */
+ { "wl_wpa_gtk_rekey", "3600", 0 }, /* GTK rotation interval */
+ { "wl_radius_ipaddr", "", 0 }, /* RADIUS server IP address */
+ { "wl_radius_key", "", 0 }, /* RADIUS shared secret */
+ { "wl_radius_port", "1812", 0 }, /* RADIUS server UDP port */
+ { "wl_crypto", "tkip", 0 }, /* WPA data encryption */
+
+
+ { "wl_unit", "0", 0 }, /* Last configured interface */
+
+ /* Restore defaults */
+ { "restore_defaults", "0", 0 }, /* Set to 0 to not restore defaults on boot */
+
+ { 0, 0, 0 }
+};
--- /dev/null
+/*
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * Low resolution timer interface linux specific implementation.
+ *
+ * $Id$
+ */
+
+/*
+* debug facilities
+*/
+#define TIMER_DEBUG 0
+#if TIMER_DEBUG
+#define TIMERDBG(fmt, args...) printf("%s: " fmt "\n" , __FUNCTION__ , ## args)
+#else
+#define TIMERDBG(fmt, args...)
+#endif
+
+
+/*
+ * POSIX timer support for Linux. Taken from linux_timer.c in upnp
+ */
+
+#define __USE_GNU
+
+
+#include <stdlib.h> // for malloc, free, etc.
+#include <string.h> // for memset, strncasecmp, etc.
+#include <assert.h> // for assert, of course.
+#include <signal.h> // for sigemptyset, etc.
+#include <stdio.h> // for printf, etc.
+#include <sys/time.h>
+#include <time.h>
+
+/* define TIMER_PROFILE to enable code which guages how accurate the timer functions are.
+ For each expiring timer the code will print the expected time interval and the actual time interval.
+#define TIMER_PROFILE
+*/
+#undef TIMER_PROFILE
+
+/*
+timer_cancel( ) - cancel a timer
+timer_connect( ) - connect a user routine to the timer signal
+timer_create( ) - allocate a timer using the specified clock for a timing base (POSIX)
+timer_delete( ) - remove a previously created timer (POSIX)
+timer_gettime( ) - get the remaining time before expiration and the reload value (POSIX)
+timer_getoverrun( ) - return the timer expiration overrun (POSIX)
+timer_settime( ) - set the time until the next expiration and arm timer (POSIX)
+nanosleep( ) - suspend the current task until the time interval elapses (POSIX)
+*/
+
+#define MS_PER_SEC 1000
+#define US_PER_SEC 1000000
+#define US_PER_MS 1000
+#define UCLOCKS_PER_SEC 1000000
+
+typedef void (*event_callback_t)(timer_t, int);
+
+#ifndef TIMESPEC_TO_TIMEVAL
+# define TIMESPEC_TO_TIMEVAL(tv, ts) { \
+ (tv)->tv_sec = (ts)->tv_sec; \
+ (tv)->tv_usec = (ts)->tv_nsec / 1000; \
+}
+#endif
+
+#ifndef TIMEVAL_TO_TIMESPEC
+# define TIMEVAL_TO_TIMESPEC(tv, ts) { \
+ (ts)->tv_sec = (tv)->tv_sec; \
+ (ts)->tv_nsec = (tv)->tv_usec * 1000; \
+}
+#endif
+
+#define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y))
+
+#define timerroundup(t,g) \
+ do { \
+ if (!timerisset(t)) (t)->tv_usec=1; \
+ if ((t)->tv_sec == 0) (t)->tv_usec=ROUNDUP((t)->tv_usec, g); \
+ } while (0)
+
+typedef long uclock_t;
+
+#define TFLAG_NONE 0
+#define TFLAG_CANCELLED (1<<0)
+#define TFLAG_DELETED (1<<1)
+
+struct event {
+ struct timeval it_interval;
+ struct timeval it_value;
+ event_callback_t func;
+ int arg;
+ unsigned short flags;
+ struct event *next;
+#ifdef TIMER_PROFILE
+ uint expected_ms;
+ uclock_t start;
+#endif
+};
+
+void timer_cancel(timer_t timerid);
+
+static void alarm_handler(int i);
+static void check_event_queue();
+static void print_event_queue();
+static void check_timer();
+#if THIS_FINDS_USE
+static int count_queue(struct event *);
+#endif
+
+void block_timer();
+void unblock_timer();
+
+static struct event *event_queue = NULL;
+static struct event *event_freelist;
+static uint g_granularity;
+static int g_maxevents = 0;
+
+uclock_t uclock()
+{
+ struct timeval tv;
+
+ gettimeofday(&tv, NULL);
+ return ((tv.tv_sec * US_PER_SEC) + tv.tv_usec);
+}
+
+
+void init_event_queue(int n)
+{
+ int i;
+ struct itimerval tv;
+
+ g_maxevents = n;
+ event_freelist = (struct event *) malloc(n * sizeof(struct event));
+ memset(event_freelist, 0, n * sizeof(struct event));
+
+ for (i = 0; i < (n-1); i++)
+ event_freelist[i].next = &event_freelist[i+1];
+
+ event_freelist[i].next = NULL;
+
+ tv.it_interval.tv_sec = 0;
+ tv.it_interval.tv_usec = 1;
+ tv.it_value.tv_sec = 0;
+ tv.it_value.tv_usec = 0;
+ setitimer (ITIMER_REAL, &tv, 0);
+ setitimer (ITIMER_REAL, 0, &tv);
+ g_granularity = tv.it_interval.tv_usec;
+
+ signal(SIGALRM, alarm_handler);
+}
+
+
+int clock_gettime(
+ clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */
+ struct timespec * tp /* where to store current time */
+)
+{
+ struct timeval tv;
+ int n;
+
+
+ n = gettimeofday(&tv, NULL);
+ TIMEVAL_TO_TIMESPEC(&tv, tp);
+
+ return n;
+}
+
+
+int timer_create(
+ clockid_t clock_id, /* clock ID (always CLOCK_REALTIME) */
+ struct sigevent * evp, /* user event handler */
+ timer_t * pTimer /* ptr to return value */
+)
+{
+ struct event *event;
+
+ if (clock_id != CLOCK_REALTIME) {
+ TIMERDBG("timer_create can only support clock id CLOCK_REALTIME");
+ exit(1);
+ }
+
+ if (evp != NULL) {
+ if (evp->sigev_notify != SIGEV_SIGNAL || evp->sigev_signo != SIGALRM) {
+ TIMERDBG("timer_create can only support signalled alarms using SIGALRM");
+ exit(1);
+ }
+ }
+
+ event = event_freelist;
+ if (event == NULL) {
+ print_event_queue();
+ }
+ assert(event != NULL);
+
+ event->flags = TFLAG_NONE;
+
+ event_freelist = event->next;
+ event->next = NULL;
+
+ check_event_queue();
+
+ *pTimer = (timer_t) event;
+
+ return 0;
+}
+
+int timer_delete(
+ timer_t timerid /* timer ID */
+)
+{
+ struct event *event = (struct event *) timerid;
+
+ if (event->flags & TFLAG_DELETED) {
+ TIMERDBG("Cannot delete a deleted event");
+ return 1;
+ }
+
+ timer_cancel(timerid);
+
+ event->flags |= TFLAG_DELETED;
+
+ event->next = event_freelist;
+ event_freelist = event;
+
+ return 0;
+}
+
+int timer_connect
+(
+ timer_t timerid, /* timer ID */
+ void (*routine)(timer_t, int), /* user routine */
+ int arg /* user argument */
+)
+{
+ struct event *event = (struct event *) timerid;
+
+ assert(routine != NULL);
+ event->func = routine;
+ event->arg = arg;
+
+ return 0;
+}
+
+
+int timer_settime
+(
+ timer_t timerid, /* timer ID */
+ int flags, /* absolute or relative */
+ const struct itimerspec * value, /* time to be set */
+ struct itimerspec * ovalue /* previous time set (NULL=no result) */
+)
+{
+ struct itimerval itimer;
+ struct event *event = (struct event *) timerid;
+ struct event **ppevent;
+
+ TIMESPEC_TO_TIMEVAL(&event->it_interval, &value->it_interval);
+ TIMESPEC_TO_TIMEVAL(&event->it_value, &value->it_value);
+
+ /* if .it_value is zero, the timer is disarmed */
+ if (!timerisset(&event->it_value)) {
+ timer_cancel(timerid);
+ return 0;
+ }
+
+ block_timer();
+
+#ifdef TIMER_PROFILE
+ event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS);
+ event->start = uclock();
+#endif
+ if (event->next) {
+ TIMERDBG("calling timer_settime with a timer that is already on the queue.");
+ }
+
+
+ /* We always want to make sure that the event at the head of the
+ queue has a timeout greater than the itimer granularity.
+ Otherwise we end up with the situation that the time remaining
+ on an itimer is greater than the time at the head of the queue
+ in the first place. */
+ timerroundup(&event->it_value, g_granularity);
+
+ timerclear(&itimer.it_value);
+ getitimer(ITIMER_REAL, &itimer);
+ if (timerisset(&itimer.it_value)) {
+ // reset the top timer to have an interval equal to the remaining interval
+ // when the timer was cancelled.
+ if (event_queue) {
+ if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) {
+ // it is an error if the amount of time remaining is more than the amount of time
+ // requested by the top event.
+ //
+ TIMERDBG("timer_settime: TIMER ERROR!");
+
+ } else {
+ // some portion of the top event has already expired.
+ // Reset the interval of the top event to remaining
+ // time left in that interval.
+ //
+ event_queue->it_value = itimer.it_value;
+
+ // if we were the earliest timer before now, we are still the earliest timer now.
+ // we do not need to reorder the list.
+ }
+ }
+ }
+
+ // Now, march down the list, decrementing the new timer by the
+ // current it_value of each event on the queue.
+ ppevent = &event_queue;
+ while (*ppevent) {
+ if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) {
+ // if the proposed event will trigger sooner than the next event
+ // in the queue, we will insert the new event just before the next one.
+ //
+ // we also need to adjust the delta value to the next event.
+ timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value));
+ break;
+ }
+ // subtract the interval of the next event from the proposed interval.
+ timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value));
+
+ ppevent = &((*ppevent)->next);
+ }
+
+ // we have found our proper place in the queue,
+ // link our new event into the pending event queue.
+ event->next = *ppevent;
+ *ppevent = event;
+
+ check_event_queue();
+
+ // if our new event ended up at the front of the queue, reissue the timer.
+ if (event == event_queue) {
+ timerroundup(&event_queue->it_value, g_granularity);
+ timerclear(&itimer.it_interval);
+ itimer.it_value = event_queue->it_value;
+
+ // we want to be sure to never turn off the timer completely,
+ // so if the next interval is zero, set it to some small value.
+ if (!timerisset(&(itimer.it_value)))
+ itimer.it_value = (struct timeval) { 0, 1 };
+
+ assert(!timerisset(&itimer.it_interval));
+ assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity);
+ assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity);
+ setitimer(ITIMER_REAL, &itimer, NULL);
+ check_timer();
+ }
+
+ event->flags &= ~TFLAG_CANCELLED;
+
+ unblock_timer();
+
+ return 0;
+}
+
+static void check_timer()
+{
+ struct itimerval itimer;
+
+ getitimer(ITIMER_REAL, &itimer);
+ if (timerisset(&itimer.it_interval)) {
+ TIMERDBG("ERROR timer interval is set.");
+ }
+ if (timercmp(&(itimer.it_value), &(event_queue->it_value), >)) {
+ TIMERDBG("ERROR timer expires later than top event.");
+ }
+}
+
+
+static void check_event_queue()
+{
+ struct timeval sum;
+ struct event *event;
+ int i = 0;
+
+#ifdef notdef
+ int nfree = 0;
+ struct event *p;
+ for (p = event_freelist; p; p = p->next)
+ nfree++;
+ printf("%d free events\n", nfree);
+#endif
+
+ timerclear(&sum);
+ for (event = event_queue; event; event = event->next) {
+ if (i > g_maxevents) {
+ TIMERDBG("timer queue looks like it loops back on itself!");
+ print_event_queue();
+ exit(1);
+ }
+ i++;
+ }
+}
+
+#if THIS_FINDS_USE
+/* The original upnp version has this unused function, so I left it in
+ to maintain the resemblance. */
+static int count_queue(struct event *event_queue)
+{
+ struct event *event;
+ int i = 0;
+ for (event = event_queue; event; event = event->next)
+ i++;
+ return i;
+}
+#endif
+
+static void print_event_queue()
+{
+ struct event *event;
+ int i = 0;
+
+ for (event = event_queue; event; event = event->next) {
+ printf("#%d (0x%x)->0x%x: \t%d sec %d usec\t%p\n",
+ i++, (unsigned int) event, (unsigned int) event->next, (int) event->it_value.tv_sec, (int) event->it_value.tv_usec, event->func);
+ if (i > g_maxevents) {
+ printf("...(giving up)\n");
+ break;
+ }
+ }
+}
+
+// The top element of the event queue must have expired.
+// Remove that element, run its function, and reset the timer.
+// if there is no interval, recycle the event structure.
+static void alarm_handler(int i)
+{
+ struct event *event, **ppevent;
+ struct itimerval itimer;
+ struct timeval small_interval = { 0, g_granularity/2 };
+#ifdef TIMER_PROFILE
+ uint junk;
+ uclock_t end;
+ uint actual;
+#endif
+
+ block_timer();
+
+ // Loop through the event queue and remove the first event plus any
+ // subsequent events that will expire very soon thereafter (within 'small_interval'}.
+ //
+ do {
+ // remove the top event.
+ event = event_queue;
+ event_queue = event_queue->next;
+ event->next = NULL;
+
+#ifdef TIMER_PROFILE
+ end = uclock();
+ actual = ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000));
+ if (actual < 0)
+ junk = end;
+ TIMERDBG("expected %d ms actual %d ms", event->expected_ms, ((end-event->start)/((uclock_t)UCLOCKS_PER_SEC/1000)));
+#endif
+
+ // call the event callback function
+ (*(event->func))((timer_t) event, (int)event->arg);
+
+ /* If the event has been cancelled, do NOT put it back on the queue. */
+ if ( !(event->flags & TFLAG_CANCELLED) ) {
+
+ // if the event is a recurring event, reset the timer and
+ // find its correct place in the sorted list of events.
+ //
+ if (timerisset(&event->it_interval)) {
+ // event is recurring...
+ //
+ event->it_value = event->it_interval;
+#ifdef TIMER_PROFILE
+ event->expected_ms = (event->it_value.tv_sec * MS_PER_SEC) + (event->it_value.tv_usec / US_PER_MS);
+ event->start = uclock();
+#endif
+ timerroundup(&event->it_value, g_granularity);
+
+ // Now, march down the list, decrementing the new timer by the
+ // current delta of each event on the queue.
+ ppevent = &event_queue;
+ while (*ppevent) {
+ if ( timercmp(&(event->it_value), &((*ppevent)->it_value), <) ) {
+ // if the proposed event will trigger sooner than the next event
+ // in the queue, we will insert the new event just before the next one.
+ //
+ // we also need to adjust the delta value to the next event.
+ timersub(&((*ppevent)->it_value), &(event->it_value), &((*ppevent)->it_value));
+ break;
+ }
+ timersub(&(event->it_value), &((*ppevent)->it_value), &(event->it_value));
+ ppevent = &((*ppevent)->next);
+ }
+
+ // we have found our proper place in the queue,
+ // link our new event into the pending event queue.
+ event->next = *ppevent;
+ *ppevent = event;
+ } else {
+ // there is no interval, so recycle the event structure.
+ //timer_delete((timer_t) event);
+ }
+ }
+
+ check_event_queue();
+
+ } while (event_queue && timercmp(&event_queue->it_value, &small_interval, <));
+
+ // re-issue the timer...
+ if (event_queue) {
+ timerroundup(&event_queue->it_value, g_granularity);
+
+ timerclear(&itimer.it_interval);
+ itimer.it_value = event_queue->it_value;
+ // we want to be sure to never turn off the timer completely,
+ // so if the next interval is zero, set it to some small value.
+ if (!timerisset(&(itimer.it_value)))
+ itimer.it_value = (struct timeval) { 0, 1 };
+
+ setitimer(ITIMER_REAL, &itimer, NULL);
+ check_timer();
+ } else {
+ TIMERDBG("There are no events in the queue - timer not reset.");
+ }
+
+ unblock_timer();
+}
+
+static int block_count = 0;
+
+void block_timer()
+{
+ sigset_t set;
+
+ if (block_count++ == 0) {
+ sigemptyset(&set);
+ sigaddset(&set, SIGALRM);
+ sigprocmask(SIG_BLOCK, &set, NULL);
+ }
+}
+
+void unblock_timer()
+{
+ sigset_t set;
+
+ if (--block_count == 0) {
+ sigemptyset(&set);
+ sigaddset(&set, SIGALRM);
+ sigprocmask(SIG_UNBLOCK, &set, NULL);
+ }
+}
+
+void timer_cancel_all()
+{
+ struct itimerval timeroff = { { 0, 0 }, { 0, 0} };
+ struct event *event;
+ struct event **ppevent;
+
+ setitimer(ITIMER_REAL, &timeroff, NULL);
+
+ ppevent = &event_queue;
+ while (*ppevent) {
+ event = *ppevent;
+ *ppevent = event->next;
+ event->next = NULL;
+ }
+}
+
+
+
+void timer_cancel(timer_t timerid)
+{
+ struct itimerval itimer;
+ struct itimerval timeroff = { { 0, 0 }, { 0, 0} };
+ struct event *event = (struct event *) timerid;
+ struct event **ppevent;
+
+ if (event->flags & TFLAG_CANCELLED) {
+ TIMERDBG("Cannot cancel a cancelled event");
+ return;
+ }
+
+ block_timer();
+
+ ppevent = &event_queue;
+ while (*ppevent) {
+ if ( *ppevent == event ) {
+
+ /* RACE CONDITION - if the alarm goes off while we are in
+ this loop, and if the timer we want to cancel is the
+ next to expire, the alarm will end up firing
+ after this routine is complete, causing it to go off early. */
+
+ /* If the cancelled timer is the next to expire,
+ we need to do something special to clean up correctly. */
+ if (event == event_queue && event->next != NULL) {
+ timerclear(&itimer.it_value);
+ getitimer(ITIMER_REAL, &itimer);
+
+ /* subtract the time that has already passed while waiting for this timer... */
+ timersub(&(event->it_value), &(itimer.it_value), &(event->it_value));
+
+ /* and add any remainder to the next timer in the list */
+ timeradd(&(event->next->it_value), &(event->it_value), &(event->next->it_value));
+ }
+
+ *ppevent = event->next;
+ event->next = NULL;
+
+ if (event_queue) {
+ timerroundup(&event_queue->it_value, g_granularity);
+ timerclear(&itimer.it_interval);
+ itimer.it_value = event_queue->it_value;
+
+ /* We want to be sure to never turn off the timer
+ completely if there are more events on the queue,
+ so if the next interval is zero, set it to some
+ small value. */
+
+ if (!timerisset(&(itimer.it_value)))
+ itimer.it_value = (struct timeval) { 0, 1 };
+
+ assert(itimer.it_value.tv_sec > 0 || itimer.it_value.tv_usec >= g_granularity);
+ assert(event_queue->it_value.tv_sec > 0 || event_queue->it_value.tv_usec >= g_granularity);
+ setitimer(ITIMER_REAL, &itimer, NULL);
+ check_timer();
+ } else {
+ setitimer(ITIMER_REAL, &timeroff, NULL);
+ }
+ break;
+ }
+ ppevent = &((*ppevent)->next);
+ }
+
+ event->flags |= TFLAG_CANCELLED;
+
+ unblock_timer();
+}
+
+/*
+* timer related headers
+*/
+#include "bcmtimer.h"
+
+/*
+* locally used global variables and constants
+*/
+
+/*
+* Initialize internal resources used in the timer module. It must be called
+* before any other timer function calls. The param 'timer_entries' is used
+* to pre-allocate fixed number of timer entries.
+*/
+int bcm_timer_module_init(int timer_entries, bcm_timer_module_id *module_id)
+{
+ init_event_queue(timer_entries);
+ *module_id = (bcm_timer_module_id)event_freelist;
+ return 0;
+}
+
+/*
+* Cleanup internal resources used by this timer module. It deletes all
+* pending timer entries from the backend timer system as well.
+*/
+int bcm_timer_module_cleanup(bcm_timer_module_id module_id)
+{
+ module_id = 0;
+ return 0;
+}
+
+int bcm_timer_create(bcm_timer_module_id module_id, bcm_timer_id *timer_id)
+{
+ module_id = 0;
+ return timer_create(CLOCK_REALTIME, NULL, (timer_t *)timer_id);
+}
+
+int bcm_timer_delete(bcm_timer_id timer_id)
+{
+ return timer_delete((timer_t)timer_id);
+}
+
+int bcm_timer_gettime(bcm_timer_id timer_id, struct itimerspec *timer_spec)
+{
+ return -1;
+}
+
+int bcm_timer_settime(bcm_timer_id timer_id, const struct itimerspec *timer_spec)
+{
+ return timer_settime((timer_t)timer_id, 0, timer_spec, NULL);
+}
+
+int bcm_timer_connect(bcm_timer_id timer_id, bcm_timer_cb func, int data)
+{
+ return timer_connect((timer_t)timer_id, (void *)func, data);
+}
+
+int bcm_timer_cancel(bcm_timer_id timer_id)
+{
+ timer_cancel((timer_t)timer_id);
+ return 0;
+}
+
--- /dev/null
+/*
+ * Shell-like utility functions
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <error.h>
+#include <fcntl.h>
+#include <limits.h>
+#include <unistd.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/wait.h>
+#include <termios.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <net/ethernet.h>
+
+#include <shutils.h>
+
+/*
+ * Reads file and returns contents
+ * @param fd file descriptor
+ * @return contents of file or NULL if an error occurred
+ */
+char *
+fd2str(int fd)
+{
+ char *buf = NULL;
+ size_t count = 0, n;
+
+ do {
+ buf = realloc(buf, count + 512);
+ n = read(fd, buf + count, 512);
+ if (n < 0) {
+ free(buf);
+ buf = NULL;
+ }
+ count += n;
+ } while (n == 512);
+
+ close(fd);
+ if (buf)
+ buf[count] = '\0';
+ return buf;
+}
+
+/*
+ * Reads file and returns contents
+ * @param path path to file
+ * @return contents of file or NULL if an error occurred
+ */
+char *
+file2str(const char *path)
+{
+ int fd;
+
+ if ((fd = open(path, O_RDONLY)) == -1) {
+ perror(path);
+ return NULL;
+ }
+
+ return fd2str(fd);
+}
+
+/*
+ * Waits for a file descriptor to change status or unblocked signal
+ * @param fd file descriptor
+ * @param timeout seconds to wait before timing out or 0 for no timeout
+ * @return 1 if descriptor changed status or 0 if timed out or -1 on error
+ */
+int
+waitfor(int fd, int timeout)
+{
+ fd_set rfds;
+ struct timeval tv = { timeout, 0 };
+
+ FD_ZERO(&rfds);
+ FD_SET(fd, &rfds);
+ return select(fd + 1, &rfds, NULL, NULL, (timeout > 0) ? &tv : NULL);
+}
+
+/*
+ * Concatenates NULL-terminated list of arguments into a single
+ * commmand and executes it
+ * @param argv argument list
+ * @param path NULL, ">output", or ">>output"
+ * @param timeout seconds to wait before timing out or 0 for no timeout
+ * @param ppid NULL to wait for child termination or pointer to pid
+ * @return return value of executed command or errno
+ */
+int
+_eval(char *const argv[], char *path, int timeout, int *ppid)
+{
+ pid_t pid;
+ int status;
+ int fd;
+ int flags;
+ int sig;
+ char buf[254]="";
+ int i;
+
+ switch (pid = fork()) {
+ case -1: /* error */
+ perror("fork");
+ return errno;
+ case 0: /* child */
+ /* Reset signal handlers set for parent process */
+ for (sig = 0; sig < (_NSIG-1); sig++)
+ signal(sig, SIG_DFL);
+
+ /* Clean up */
+ ioctl(0, TIOCNOTTY, 0);
+ close(STDIN_FILENO);
+ close(STDOUT_FILENO);
+ close(STDERR_FILENO);
+ setsid();
+
+ /* We want to check the board if exist UART? , add by honor 2003-12-04 */
+ if ((fd = open("/dev/console", O_RDWR)) < 0) {
+ (void) open("/dev/null", O_RDONLY);
+ (void) open("/dev/null", O_WRONLY);
+ (void) open("/dev/null", O_WRONLY);
+ }
+ else{
+ close(fd);
+ (void) open("/dev/console", O_RDONLY);
+ (void) open("/dev/console", O_WRONLY);
+ (void) open("/dev/console", O_WRONLY);
+ }
+
+ /* Redirect stdout to <path> */
+ if (path) {
+ flags = O_WRONLY | O_CREAT;
+ if (!strncmp(path, ">>", 2)) {
+ /* append to <path> */
+ flags |= O_APPEND;
+ path += 2;
+ } else if (!strncmp(path, ">", 1)) {
+ /* overwrite <path> */
+ flags |= O_TRUNC;
+ path += 1;
+ }
+ if ((fd = open(path, flags, 0644)) < 0)
+ perror(path);
+ else {
+ dup2(fd, STDOUT_FILENO);
+ close(fd);
+ }
+ }
+
+ /* execute command */
+ for(i=0 ; argv[i] ; i++)
+ snprintf(buf+strlen(buf), sizeof(buf), "%s ", argv[i]);
+ dprintf("cmd=[%s]\n", buf);
+ setenv("PATH", "/sbin:/bin:/usr/sbin:/usr/bin", 1);
+ alarm(timeout);
+ execvp(argv[0], argv);
+ perror(argv[0]);
+ exit(errno);
+ default: /* parent */
+ if (ppid) {
+ *ppid = pid;
+ return 0;
+ } else {
+ waitpid(pid, &status, 0);
+ if (WIFEXITED(status))
+ return WEXITSTATUS(status);
+ else
+ return status;
+ }
+ }
+}
+
+/*
+ * Concatenates NULL-terminated list of arguments into a single
+ * commmand and executes it
+ * @param argv argument list
+ * @return stdout of executed command or NULL if an error occurred
+ */
+char *
+_backtick(char *const argv[])
+{
+ int filedes[2];
+ pid_t pid;
+ int status;
+ char *buf = NULL;
+
+ /* create pipe */
+ if (pipe(filedes) == -1) {
+ perror(argv[0]);
+ return NULL;
+ }
+
+ switch (pid = fork()) {
+ case -1: /* error */
+ return NULL;
+ case 0: /* child */
+ close(filedes[0]); /* close read end of pipe */
+ dup2(filedes[1], 1); /* redirect stdout to write end of pipe */
+ close(filedes[1]); /* close write end of pipe */
+ execvp(argv[0], argv);
+ exit(errno);
+ break;
+ default: /* parent */
+ close(filedes[1]); /* close write end of pipe */
+ buf = fd2str(filedes[0]);
+ waitpid(pid, &status, 0);
+ break;
+ }
+
+ return buf;
+}
+
+/*
+ * Kills process whose PID is stored in plaintext in pidfile
+ * @param pidfile PID file
+ * @return 0 on success and errno on failure
+ */
+int
+kill_pidfile(char *pidfile)
+{
+ FILE *fp = fopen(pidfile, "r");
+ char buf[256];
+
+ if (fp && fgets(buf, sizeof(buf), fp)) {
+ pid_t pid = strtoul(buf, NULL, 0);
+ fclose(fp);
+ return kill(pid, SIGTERM);
+ } else
+ return errno;
+}
+
+/*
+ * fread() with automatic retry on syscall interrupt
+ * @param ptr location to store to
+ * @param size size of each element of data
+ * @param nmemb number of elements
+ * @param stream file stream
+ * @return number of items successfully read
+ */
+int
+safe_fread(void *ptr, size_t size, size_t nmemb, FILE *stream)
+{
+ size_t ret = 0;
+
+ do {
+ clearerr(stream);
+ ret += fread((char *)ptr + (ret * size), size, nmemb - ret, stream);
+ } while (ret < nmemb && ferror(stream) && errno == EINTR);
+
+ return ret;
+}
+
+/*
+ * fwrite() with automatic retry on syscall interrupt
+ * @param ptr location to read from
+ * @param size size of each element of data
+ * @param nmemb number of elements
+ * @param stream file stream
+ * @return number of items successfully written
+ */
+int
+safe_fwrite(const void *ptr, size_t size, size_t nmemb, FILE *stream)
+{
+ size_t ret = 0;
+
+ do {
+ clearerr(stream);
+ ret += fwrite((char *)ptr + (ret * size), size, nmemb - ret, stream);
+ } while (ret < nmemb && ferror(stream) && errno == EINTR);
+
+ return ret;
+}
+
+/*
+ * Convert Ethernet address string representation to binary data
+ * @param a string in xx:xx:xx:xx:xx:xx notation
+ * @param e binary data
+ * @return TRUE if conversion was successful and FALSE otherwise
+ */
+int
+ether_atoe(const char *a, unsigned char *e)
+{
+ char *c = (char *) a;
+ int i = 0;
+
+ memset(e, 0, ETHER_ADDR_LEN);
+ for (;;) {
+ e[i++] = (unsigned char) strtoul(c, &c, 16);
+ if (!*c++ || i == ETHER_ADDR_LEN)
+ break;
+ }
+ return (i == ETHER_ADDR_LEN);
+}
+
+/*
+ * Convert Ethernet address binary data to string representation
+ * @param e binary data
+ * @param a string in xx:xx:xx:xx:xx:xx notation
+ * @return a
+ */
+char *
+ether_etoa(const unsigned char *e, char *a)
+{
+ char *c = a;
+ int i;
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++) {
+ if (i)
+ *c++ = ':';
+ c += sprintf(c, "%02X", e[i] & 0xff);
+ }
+ return a;
+}
--- /dev/null
+/*
+ * Wireless network adapter utilities
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+#include <string.h>
+
+#include <typedefs.h>
+#include <wlutils.h>
+
+int
+wl_probe(char *name)
+{
+ int ret, val;
+
+ /* Check interface */
+ if ((ret = wl_ioctl(name, WLC_GET_MAGIC, &val, sizeof(val))))
+ return ret;
+ if (val != WLC_IOCTL_MAGIC)
+ return -1;
+ if ((ret = wl_ioctl(name, WLC_GET_VERSION, &val, sizeof(val))))
+ return ret;
+ if (val > WLC_IOCTL_VERSION)
+ return -1;
+
+ return ret;
+}
+
+int
+wl_set_val(char *name, char *var, void *val, int len)
+{
+ char buf[128];
+ int buf_len;
+
+ /* check for overflow */
+ if ((buf_len = strlen(var)) + 1 + len > sizeof(buf))
+ return -1;
+
+ strcpy(buf, var);
+ buf_len += 1;
+
+ /* append int value onto the end of the name string */
+ memcpy(&buf[buf_len], val, len);
+ buf_len += len;
+
+ return wl_ioctl(name, WLC_SET_VAR, buf, buf_len);
+}
+
+int
+wl_get_val(char *name, char *var, void *val, int len)
+{
+ char buf[128];
+ int ret;
+
+ /* check for overflow */
+ if (strlen(var) + 1 > sizeof(buf) || len > sizeof(buf))
+ return -1;
+
+ strcpy(buf, var);
+ if ((ret = wl_ioctl(name, WLC_GET_VAR, buf, sizeof(buf))))
+ return ret;
+
+ memcpy(val, buf, len);
+ return 0;
+}
+
+int
+wl_set_int(char *name, char *var, int val)
+{
+ return wl_set_val(name, var, &val, sizeof(val));
+}
+
+int
+wl_get_int(char *name, char *var, int *val)
+{
+ return wl_get_val(name, var, val, sizeof(*val));
+}
+
--- /dev/null
+/*
+ * Wireless network adapter utilities (linux-specific)
+ *
+ * Copyright 2004, Broadcom Corporation
+ * All Rights Reserved.
+ *
+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
+ *
+ * $Id$
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <string.h>
+#include <errno.h>
+#include <sys/ioctl.h>
+#include <net/if.h>
+
+#include <typedefs.h>
+#include <wlioctl.h>
+#include <wlutils.h>
+
+int
+wl_ioctl(char *name, int cmd, void *buf, int len)
+{
+ struct ifreq ifr;
+ wl_ioctl_t ioc;
+ int ret = 0;
+ int s;
+
+ /* open socket to kernel */
+ if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
+ perror("socket");
+ return errno;
+ }
+
+ /* do it */
+ ioc.cmd = cmd;
+ ioc.buf = buf;
+ ioc.len = len;
+ strncpy(ifr.ifr_name, name, IFNAMSIZ);
+ ifr.ifr_data = (caddr_t) &ioc;
+ if ((ret = ioctl(s, SIOCDEVPRIVATE, &ifr)) < 0)
+ if (cmd != WLC_GET_MAGIC)
+ perror(ifr.ifr_name);
+
+ /* cleanup */
+ close(s);
+ return ret;
+}
+
+int
+wl_hwaddr(char *name, unsigned char *hwaddr)
+{
+ struct ifreq ifr;
+ int ret = 0;
+ int s;
+
+ /* open socket to kernel */
+ if ((s = socket(AF_INET, SOCK_DGRAM, 0)) < 0) {
+ perror("socket");
+ return errno;
+ }
+
+ /* do it */
+ strncpy(ifr.ifr_name, name, IFNAMSIZ);
+ if ((ret = ioctl(s, SIOCGIFHWADDR, &ifr)) == 0)
+ memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, ETHER_ADDR_LEN);
+
+ /* cleanup */
+ close(s);
+ return ret;
+}
+
+++ /dev/null
-#############################################################
-#
-# linksys and openwrt tools
-#
-#############################################################
-
-LINKSYS_TGZ_SITE=http://openwrt.openbsd-geek.de
-LINKSYS_KERNEL_INCLUDE=$(BUILD_DIR)/linksys-kernel
-
-# shared library stuff extracted from linksys firmware GPL sourcetree
-# WRT54GS_3_37_2_1109_US
-LINKSYS_SHARED_TGZ=linksys-shared.tar.gz
-LINKSYS_SHARED_DIR=$(BUILD_DIR)/linksys-shared
-LINKSYS_SHARED_TARGET_BINARY:=usr/lib/libshared.so
-
-$(DL_DIR)/$(LINKSYS_SHARED_TGZ):
- $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_SHARED_TGZ)
-
-$(LINKSYS_SHARED_DIR)/.source: $(DL_DIR)/$(LINKSYS_SHARED_TGZ)
- zcat $(DL_DIR)/$(LINKSYS_SHARED_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- touch $(LINKSYS_SHARED_DIR)/.source
-
-$(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY): $(LINKSYS_SHARED_DIR)/.source
- $(SED) 's/#include.*/#include <cy_conf.h>/g;' $(LINKSYS_SHARED_DIR)/utils.h
- $(MAKE) -C $(LINKSYS_SHARED_DIR) -f Makefile-openwrt \
- INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I$(LINKSYS_KERNEL_INCLUDE)/include \
- -I$(LINKSYS_KERNEL_INCLUDE) -Wall -I." \
- install
-
-linksys-shared: $(TARGET_DIR)/$(LINKSYS_SHARED_TARGET_BINARY)
-
-linksys-shared-clean:
- -$(MAKE) -C $(LINKSYS_SHARED_DIR) clean
-
-linksys-shared-dirclean:
- rm -rf $(LINKSYS_SHARED_DIR)
-
-# nvram tool extracted from linksys firmware GPL sourcetree
-# WRT54GS_3_37_2_1109_US
-LINKSYS_NVRAM_TGZ=linksys-nvram.tar.gz
-LINKSYS_NVRAM_DIR=$(BUILD_DIR)/linksys-nvram
-LINKSYS_NVRAM_TARGET_BINARY:=usr/sbin/nvram
-
-$(DL_DIR)/$(LINKSYS_NVRAM_TGZ):
- $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_NVRAM_TGZ)
-
-$(LINKSYS_NVRAM_DIR)/.source: $(DL_DIR)/$(LINKSYS_NVRAM_TGZ)
- zcat $(DL_DIR)/$(LINKSYS_NVRAM_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- touch $(LINKSYS_NVRAM_DIR)/.source
-
-$(TARGET_DIR)/$(LINKSYS_NVRAM_TARGET_BINARY): $(LINKSYS_NVRAM_DIR)/.source
- $(MAKE) -C $(LINKSYS_NVRAM_DIR) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(LINKSYS_KERNEL_INCLUDE)/include \
- -I$(LINKSYS_KERNEL_INCLUDE) -I$(LINKSYS_SHARED_DIR) -Wall" install
-
-linksys-nvram: $(TARGET_DIR)/$(LINKSYS_NVRAM_TARGET_BINARY)
-
-linksys-nvram-clean:
- -$(MAKE) -C $(LINKSYS_NVRAM_BUILD_DIR) clean
-
-linksys-nvram-dirclean:
- rm -rf $(LINKSYS_NVRAM_DIR)
-
-# wlconf tool extracted from linksys firmware GPL sourcetree
-# WRT54GS_3_37_2_1109_US
-LINKSYS_WLCONF_TGZ=linksys-wlconf.tar.gz
-LINKSYS_WLCONF_DIR=$(BUILD_DIR)/linksys-wlconf
-LINKSYS_WLCONF_TARGET_BINARY:=usr/sbin/wlconf
-
-$(DL_DIR)/$(LINKSYS_WLCONF_TGZ):
- $(WGET) -P $(DL_DIR) $(LINKSYS_TGZ_SITE)/$(LINKSYS_WLCONF_TGZ)
-
-$(LINKSYS_WLCONF_DIR)/.source: $(DL_DIR)/$(LINKSYS_WLCONF_TGZ)
- zcat $(DL_DIR)/$(LINKSYS_WLCONF_TGZ) | tar -C $(BUILD_DIR) $(TAR_OPTIONS) -
- touch $(LINKSYS_WLCONF_DIR)/.source
-
-$(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY): $(LINKSYS_WLCONF_DIR)/.source
- $(MAKE) -C $(LINKSYS_WLCONF_DIR) INSTALLDIR=$(TARGET_DIR) \
- CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld STRIP="$(STRIP)" \
- CFLAGS="$(TARGET_CFLAGS) -I. -I$(LINKSYS_KERNEL_INCLUDE)/include \
- -I$(LINKSYS_KERNEL_INCLUDE) \
- -I$(LINKSYS_SHARED_DIR) \
- -I$(LINKSYS_NVRAM_DIR) \
- -Wall -DOPENWRT_WLCONF" \
- LDFLAGS="-lnvram -lshared -L$(BUILD_DIR)/linksys-shared -L$(BUILD_DIR)/linksys-nvram" \
- install
-
-linksys-wlconf: $(TARGET_DIR)/$(LINKSYS_WLCONF_TARGET_BINARY)
-
-linksys-wlconf-clean:
- -$(MAKE) -C $(LINKSYS_WLCONF_BUILD_DIR) clean
-
-linksys-wlconf-dirclean:
- rm -rf $(LINKSYS_WLCONF_DIR)
-
-# mtd tool
-OPENWRT_MTD_SOURCE=./mtd.c
-OPENWRT_MTD_TARGET_BINARY:=sbin/mtd
-
-$(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY):
- $(TARGET_CC) -o $@ $(OPENWRT_MTD_SOURCE)
- $(STRIP) $@
-
-
-openwrt-mtd: $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY)
-
-openwrt-mtd-clean:
- rm $(TARGET_DIR)/$(OPENWRT_MTD_TARGET_BINARY)
-
-# jffs2root tool
-OPENWRT_JFFS2ROOT_SOURCE=./jffs2root.c
-OPENWRT_JFFS2ROOT_TARGET_BINARY:=sbin/jffs2root
-
-$(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY):
- $(TARGET_CC) -o $@ $(OPENWRT_JFFS2ROOT_SOURCE)
- $(STRIP) $@
-
-openwrt-jffs2root: $(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY)
-
-openwrt-jffs2root-clean:
- rm $(TARGET_DIR)/$(OPENWRT_JFFS2ROOT_TARGET_BINARY)
-
-
-linksys: linksys-shared linksys-nvram linksys-wlconf
-
-openwrt: linksys openwrt-mtd openwrt-jffs2root
-
-openwrt-dirclean: linksys-shared-dirclean linksys-nvram-dirclean linksys-wlconf-dirclean
-
projects / openwrt.git / commitdiff