#
-# Copyright (C) 2008 OpenWrt.org
+# Copyright (C) 2008-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
SUBTARGETS=generic harddisk
CFLAGS=-Os -pipe -march=armv5t -mtune=xscale -funit-at-a-time
-LINUX_VERSION:=2.6.30.10
+LINUX_VERSION:=2.6.32.9
include $(INCLUDE_DIR)/target.mk
--- /dev/null
+#!/bin/sh
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+usb_led=''
+usb_device=''
+
+led_set_attr() {
+ [ -f "/sys/class/leds/$1/$2" ] && echo "$3" > "/sys/class/leds/$1/$2"
+}
+
+usb_led_set_timer() {
+ led_set_attr "${usb_led}" 'trigger' 'timer'
+ led_set_attr "${usb_led}" 'delay_on' "$1"
+ led_set_attr "${usb_led}" 'delay_off' "$2"
+}
+
+usb_led_on() {
+ led_set_attr "${usb_led}" 'trigger' 'none'
+ led_set_attr "${usb_led}" 'brightness' 255
+}
+
+usb_led_off() {
+ led_set_attr "${usb_led}" 'trigger' 'none'
+ led_set_attr "${usb_led}" 'brightness' 0
+}
+
+get_usb_led() {
+ local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+
+ case "${hardware}" in
+ 'Linksys WRT350N v2')
+ usb_led='wrt350nv2:green:usb'
+ usb_device='1-1:1.0'
+ ;;
+ esac;
+}
+
+get_usb_led
+
+case "${ACTION}" in
+ add)
+ # update LEDs
+ [ "${usb_device}" = "${DEVICENAME}" ] && usb_led_on
+ ;;
+ remove)
+ # update LEDs
+ [ "${usb_device}" = "${DEVICENAME}" ] && usb_led_off
+ ;;
+esac
--- /dev/null
+#!/bin/sh
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+#
+# This script sets system defaults for the hardware on firstboot
+#
+
+local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
+
+wrt350nv2_default() {
+# leds
+ uci batch <<__EOF
+set system.power_led=led
+set system.power_led.name='Power LED (green)'
+set system.power_led.sysfs='wrt350nv2:green:power'
+set system.power_led.default='1'
+set system.wifi_led=led
+set system.wifi_led.name='Wireless LED (green)'
+set system.wifi_led.sysfs='wrt350nv2:green:wireless'
+set system.wifi_led.trigger='netdev'
+set system.wifi_led.dev='wlan0'
+set system.wifi_led.mode='link tx rx'
+set system.wifi_led.default='0'
+commit system
+__EOF
+}
+
+case "${hardware}" in
+ 'Linksys WRT350N v2')
+ wrt350nv2_default
+ ;;
+esac
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CRC16=y
# CONFIG_CRC_CCITT is not set
+CONFIG_CRYPTO_DEV_MV_CESA=y
+CONFIG_CRYPTO_HW=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEVPORT=y
CONFIG_DLCI=m
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_GENERIC_GPIO=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
# CONFIG_HAMRADIO is not set
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_LANMEDIA is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_LEDS_GPIO=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LEGACY_PTYS=y
# CONFIG_LLC2 is not set
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+# CONFIG_MACH_BIGDISK is not set
+# CONFIG_MACH_D2NET is not set
# CONFIG_MACH_DB88F5281 is not set
# CONFIG_MACH_DNS323 is not set
CONFIG_MACH_DT2=y
# CONFIG_MACH_LINKSTATION_PRO is not set
# CONFIG_MACH_MSS2 is not set
# CONFIG_MACH_MV2120 is not set
+# CONFIG_MACH_NET2BIG is not set
# CONFIG_MACH_RD88F5181L_FXO is not set
# CONFIG_MACH_RD88F5181L_GE is not set
# CONFIG_MACH_RD88F5182 is not set
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
-@@ -614,7 +614,7 @@ __tagtable(ATAG_REVISION, parse_tag_revi
+@@ -629,7 +629,7 @@ __tagtable(ATAG_REVISION, parse_tag_revi
static int __init parse_tag_cmdline(const struct tag *tag)
{
---- a/arch/arm/mach-orion5x/wnr854t-setup.c
-+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
-@@ -15,6 +15,7 @@
- #include <linux/mtd/physmap.h>
- #include <linux/mv643xx_eth.h>
- #include <linux/ethtool.h>
-+#include <net/dsa.h>
- #include <asm/mach-types.h>
- #include <asm/gpio.h>
- #include <asm/mach/arch.h>
-@@ -97,6 +98,20 @@ static struct mv643xx_eth_platform_data
- .duplex = DUPLEX_FULL,
- };
-
-+static struct dsa_chip_data wnr854t_switch_chip_data = {
-+ .port_names[0] = "lan3",
-+ .port_names[1] = "lan4",
-+ .port_names[2] = "wan",
-+ .port_names[3] = "cpu",
-+ .port_names[5] = "lan1",
-+ .port_names[7] = "lan2",
-+};
-+
-+static struct dsa_platform_data wnr854t_switch_plat_data = {
-+ .nr_chips = 1,
-+ .chip = &wnr854t_switch_chip_data,
-+};
-+
- static void __init wnr854t_init(void)
- {
- /*
-@@ -110,6 +125,7 @@ static void __init wnr854t_init(void)
- * Configure peripherals.
- */
- orion5x_eth_init(&wnr854t_eth_data);
-+ orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
- orion5x_uart0_init();
-
- orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -385,8 +385,9 @@ struct mtd_info *cfi_cmdset_0002(struct
+@@ -374,8 +374,9 @@ struct mtd_info *cfi_cmdset_0002(struct
cfi_fixup_major_minor(cfi, extp);
--- /dev/null
+--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c 2009-12-08 02:39:46.000000000 +0100
++++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c 2010-01-13 15:25:17.000000000 +0100
+@@ -15,6 +15,9 @@
+ #include <linux/mtd/physmap.h>
+ #include <linux/mv643xx_eth.h>
+ #include <linux/ethtool.h>
++#include <linux/leds.h>
++#include <linux/gpio_keys.h>
++#include <linux/input.h>
+ #include <net/dsa.h>
+ #include <asm/mach-types.h>
+ #include <asm/gpio.h>
+@@ -24,6 +27,80 @@
+ #include "common.h"
+ #include "mpp.h"
+
++/*
++ * LEDs attached to GPIO
++ */
++static struct gpio_led wrt350n_v2_led_pins[] = {
++ {
++ .name = "wrt350nv2:green:power",
++ .gpio = 0,
++ .active_low = 1,
++ }, {
++ .name = "wrt350nv2:green:security",
++ .gpio = 1,
++ .active_low = 1,
++ }, {
++ .name = "wrt350nv2:orange:power",
++ .gpio = 5,
++ .active_low = 1,
++ }, {
++ .name = "wrt350nv2:green:usb",
++ .gpio = 6,
++ .active_low = 1,
++ }, {
++ .name = "wrt350nv2:green:wireless",
++ .gpio = 7,
++ .active_low = 1,
++ },
++};
++
++static struct gpio_led_platform_data wrt350n_v2_led_data = {
++ .leds = wrt350n_v2_led_pins,
++ .num_leds = ARRAY_SIZE(wrt350n_v2_led_pins),
++};
++
++static struct platform_device wrt350n_v2_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = &wrt350n_v2_led_data,
++ },
++};
++
++/*
++ * Buttons attached to GPIO
++ */
++static struct gpio_keys_button wrt350n_v2_buttons[] = {
++ {
++ .code = KEY_RESTART,
++ .gpio = 3,
++ .desc = "Reset Button",
++ .active_low = 1,
++ }, {
++ .code = KEY_WLAN,
++ .gpio = 2,
++ .desc = "WPS Button",
++ .active_low = 1,
++ },
++};
++
++static struct gpio_keys_platform_data wrt350n_v2_button_data = {
++ .buttons = wrt350n_v2_buttons,
++ .nbuttons = ARRAY_SIZE(wrt350n_v2_buttons),
++};
++
++static struct platform_device wrt350n_v2_button_device = {
++ .name = "gpio-keys",
++ .id = -1,
++ .num_resources = 0,
++ .dev = {
++ .platform_data = &wrt350n_v2_button_data,
++ },
++};
++
++/*
++ * General setup
++ */
+ static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
+ { 0, MPP_GPIO }, /* Power LED green (0=on) */
+ { 1, MPP_GPIO }, /* Security LED (0=on) */
+@@ -140,6 +217,8 @@
+ orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
+ WRT350N_V2_NOR_BOOT_SIZE);
+ platform_device_register(&wrt350n_v2_nor_flash);
++ platform_device_register(&wrt350n_v2_button_device);
++ platform_device_register(&wrt350n_v2_leds);
+ }
+
+ static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -58,11 +58,11 @@ static struct mtd_partition wrt350n_v2_nor_flash_partitions
+@@ -135,11 +135,11 @@ static struct mtd_partition wrt350n_v2_nor_flash_partitions
{
.name = "kernel",
.offset = 0x00000000,
}, {
.name = "lang",
.offset = 0x00760000,
-@@ -75,6 +79,14 @@ static struct mtd_partition wrt350n_v2_nor_flash_partitions
+@@ -152,6 +152,14 @@ static struct mtd_partition wrt350n_v2_nor_flash_partitions
.name = "u-boot",
.offset = 0x007c0000,
.size = 0x00040000,
select I2C_BOARDINFO
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
-@@ -17,3 +17,4 @@ obj-$(CONFIG_MACH_WNR854T) += wnr854t-se
+@@ -20,3 +20,4 @@ obj-$(CONFIG_MACH_WNR854T) += wnr854t-se
obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o
obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o
obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
-@@ -335,7 +335,7 @@ struct sk_buff {
+@@ -332,7 +332,7 @@ struct sk_buff {
* want to keep them across layers you have to do a skb_clone()
* first. This is owned by whoever has the skb queued ATM.
*/
projects / openwrt.git / commitdiff