3D-Drucker%2FSlicerBundle.ini.mw

   1 # generated by Slic3r 1.2.9 on Tue Nov  1 09:16:29 2016
   2
   3 [filament:Lulzbot ABS]
   4 bed_temperature = 100
   5 bridge_fan_speed = 50
   6 cooling = 1
   7 disable_fan_first_layers = 1
   8 extrusion_multiplier = 1
   9 fan_always_on = 0
  10 fan_below_layer_time = 60
  11 filament_colour = #FFFFFF
  12 filament_diameter = 2.85
  13 first_layer_bed_temperature = 100
  14 first_layer_temperature = 250
  15 max_fan_speed = 0
  16 min_fan_speed = 0
  17 min_print_speed = 5
  18 slowdown_below_layer_time = 20
  19 temperature = 230
  20
  21 [filament:Lulzbot PETG ]
  22 bed_temperature = 75
  23 bridge_fan_speed = 100
  24 cooling = 1
  25 disable_fan_first_layers = 1
  26 extrusion_multiplier = 1
  27 fan_always_on = 1
  28 fan_below_layer_time = 60
  29 filament_colour = #B1EB96
  30 filament_diameter = 2.85
  31 first_layer_bed_temperature = 75
  32 first_layer_temperature = 235
  33 max_fan_speed = 100
  34 min_fan_speed = 50
  35 min_print_speed = 10
  36 slowdown_below_layer_time = 30
  37 temperature = 235
  38
  39 [filament:Lulzbot PLA]
  40 bed_temperature = 50
  41 bridge_fan_speed = 100
  42 cooling = 1
  43 disable_fan_first_layers = 1
  44 extrusion_multiplier = 1
  45 fan_always_on = 1
  46 fan_below_layer_time = 60
  47 filament_colour = #C0C0C0
  48 filament_diameter = 2.86
  49 first_layer_bed_temperature = 50
  50 first_layer_temperature = 200
  51 max_fan_speed = 100
  52 min_fan_speed = 50
  53 min_print_speed = 5
  54 slowdown_below_layer_time = 30
  55 temperature = 200
  56
  57 [filament:LulzBot PLA DAS FILAMENT]
  58 bed_temperature = 50
  59 bridge_fan_speed = 100
  60 cooling = 1
  61 disable_fan_first_layers = 1
  62 extrusion_multiplier = 1
  63 fan_always_on = 0
  64 fan_below_layer_time = 60
  65 filament_colour = #FFFFFF
  66 filament_diameter = 2.85
  67 first_layer_bed_temperature = 50
  68 first_layer_temperature = 220
  69 max_fan_speed = 100
  70 min_fan_speed = 30
  71 min_print_speed = 5
  72 slowdown_below_layer_time = 30
  73 temperature = 215
  74
  75 [filament:Lulzbot PLA Weiß]
  76 bed_temperature = 50
  77 bridge_fan_speed = 100
  78 cooling = 1
  79 disable_fan_first_layers = 1
  80 extrusion_multiplier = 1
  81 fan_always_on = 0
  82 fan_below_layer_time = 60
  83 filament_colour = #FFFFFF
  84 filament_diameter = 2.85
  85 first_layer_bed_temperature = 50
  86 first_layer_temperature = 200
  87 max_fan_speed = 100
  88 min_fan_speed = 30
  89 min_print_speed = 5
  90 slowdown_below_layer_time = 30
  91 temperature = 180
  92
  93 [filament:MendelPro ABS]
  94 bed_temperature = 0
  95 bridge_fan_speed = 50
  96 cooling = 1
  97 disable_fan_first_layers = 1
  98 extrusion_multiplier = 1
  99 fan_always_on = 0
 100 fan_below_layer_time = 60
 101 filament_colour = #FFFFFF
 102 filament_diameter = 1.7
 103 first_layer_bed_temperature = 0
 104 first_layer_temperature = 250
 105 max_fan_speed = 0
 106 min_fan_speed = 0
 107 min_print_speed = 5
 108 slowdown_below_layer_time = 30
 109 temperature = 230
 110
 111 [filament:MendelPro Holz]
 112 bed_temperature = 50
 113 bridge_fan_speed = 100
 114 cooling = 1
 115 disable_fan_first_layers = 1
 116 extrusion_multiplier = 1
 117 fan_always_on = 1
 118 fan_below_layer_time = 60
 119 filament_colour = #FFFFFF
 120 filament_diameter = 1.7
 121 first_layer_bed_temperature = 55
 122 first_layer_temperature = 200
 123 max_fan_speed = 100
 124 min_fan_speed = 50
 125 min_print_speed = 5
 126 slowdown_below_layer_time = 30
 127 temperature = 185
 128
 129 [filament:MendelPro PLA]
 130 bed_temperature = 50
 131 bridge_fan_speed = 100
 132 cooling = 1
 133 disable_fan_first_layers = 1
 134 extrusion_multiplier = 1
 135 fan_always_on = 1
 136 fan_below_layer_time = 60
 137 filament_colour = #FFFFFF
 138 filament_diameter = 1.7
 139 first_layer_bed_temperature = 50
 140 first_layer_temperature = 200
 141 max_fan_speed = 100
 142 min_fan_speed = 50
 143 min_print_speed = 5
 144 slowdown_below_layer_time = 15
 145 temperature = 180
 146
 147 [filament:TinyBoy PLA]
 148 bed_temperature = 0
 149 bridge_fan_speed = 100
 150 cooling = 1
 151 disable_fan_first_layers = 2
 152 extrusion_multiplier = 1
 153 fan_always_on = 1
 154 fan_below_layer_time = 60
 155 filament_colour = #FF8000
 156 filament_diameter = 1.75
 157 first_layer_bed_temperature = 0
 158 first_layer_temperature = 200
 159 max_fan_speed = 40
 160 min_fan_speed = 35
 161 min_print_speed = 5
 162 slowdown_below_layer_time = 15
 163 temperature = 190
 164
 165 [filament:prusa i3 ABS grün]
 166 bed_temperature = 100
 167 bridge_fan_speed = 70
 168 cooling = 1
 169 disable_fan_first_layers = 1
 170 extrusion_multiplier = 1
 171 fan_always_on = 0
 172 fan_below_layer_time = 60
 173 filament_colour = #80FF00
 174 filament_diameter = 2.9
 175 first_layer_bed_temperature = 100
 176 first_layer_temperature = 255
 177 max_fan_speed = 0
 178 min_fan_speed = 0
 179 min_print_speed = 5
 180 slowdown_below_layer_time = 15
 181 temperature = 245
 182
 183 [filament:prusa i3 ABS grün blau]
 184 bed_temperature = 100
 185 bridge_fan_speed = 100
 186 cooling = 1
 187 disable_fan_first_layers = 1
 188 extrusion_multiplier = 1
 189 fan_always_on = 0
 190 fan_below_layer_time = 60
 191 filament_colour = #0000A0
 192 filament_diameter = 2.9
 193 first_layer_bed_temperature = 100
 194 first_layer_temperature = 240
 195 max_fan_speed = 0
 196 min_fan_speed = 0
 197 min_print_speed = 10
 198 slowdown_below_layer_time = 30
 199 temperature = 235
 200
 201 [filament:prusa i3 PLA grau]
 202 bed_temperature = 50
 203 bridge_fan_speed = 100
 204 cooling = 1
 205 disable_fan_first_layers = 1
 206 extrusion_multiplier = 1
 207 fan_always_on = 1
 208 fan_below_layer_time = 60
 209 filament_colour = #808080
 210 filament_diameter = 2.86
 211 first_layer_bed_temperature = 50
 212 first_layer_temperature = 200
 213 max_fan_speed = 100
 214 min_fan_speed = 35
 215 min_print_speed = 10
 216 slowdown_below_layer_time = 10
 217 temperature = 185
 218
 219 [filament:prusa i3 PLA lila]
 220 bed_temperature = 50
 221 bridge_fan_speed = 100
 222 cooling = 1
 223 disable_fan_first_layers = 1
 224 extrusion_multiplier = 1
 225 fan_always_on = 1
 226 fan_below_layer_time = 60
 227 filament_colour = #8000FF
 228 filament_diameter = 3
 229 first_layer_bed_temperature = 50
 230 first_layer_temperature = 200
 231 max_fan_speed = 100
 232 min_fan_speed = 35
 233 min_print_speed = 10
 234 slowdown_below_layer_time = 10
 235 temperature = 200
 236
 237 [filament:prusa i3 PLA pink]
 238 bed_temperature = 50
 239 bridge_fan_speed = 100
 240 cooling = 1
 241 disable_fan_first_layers = 1
 242 extrusion_multiplier = 1
 243 fan_always_on = 1
 244 fan_below_layer_time = 60
 245 filament_colour = #FF00FF
 246 filament_diameter = 2.83
 247 first_layer_bed_temperature = 50
 248 first_layer_temperature = 200
 249 max_fan_speed = 100
 250 min_fan_speed = 35
 251 min_print_speed = 10
 252 slowdown_below_layer_time = 10
 253 temperature = 180
 254
 255 [filament:prusa i3 Willowflex]
 256 bed_temperature = 70
 257 bridge_fan_speed = 100
 258 cooling = 1
 259 disable_fan_first_layers = 1
 260 extrusion_multiplier = 1
 261 fan_always_on = 1
 262 fan_below_layer_time = 60
 263 filament_colour = #BF0005
 264 filament_diameter = 2.85
 265 first_layer_bed_temperature = 70
 266 first_layer_temperature = 200
 267 max_fan_speed = 100
 268 min_fan_speed = 35
 269 min_print_speed = 10
 270 slowdown_below_layer_time = 10
 271 temperature = 180
 272
 273 [presets]
 274 filament = prusa i3 Willowflex.ini
 275 print = MendelPro.ini
 276 printer = Lulzbot.ini
 277
 278 [print:Lulzbot]
 279 avoid_crossing_perimeters = 0
 280 bottom_solid_layers = 4
 281 bridge_acceleration = 0
 282 bridge_flow_ratio = 1
 283 bridge_speed = 40
 284 brim_width = 0
 285 complete_objects = 0
 286 default_acceleration = 0
 287 dont_support_bridges = 1
 288 external_fill_pattern = rectilinear
 289 external_perimeter_extrusion_width = 0
 290 external_perimeter_speed = 20
 291 external_perimeters_first = 0
 292 extra_perimeters = 1
 293 extruder_clearance_height = 20
 294 extruder_clearance_radius = 20
 295 extrusion_width = 0
 296 fill_angle = 35
 297 fill_density = 20%
 298 fill_pattern = rectilinear
 299 first_layer_acceleration = 0
 300 first_layer_extrusion_width = 0
 301 first_layer_height = 0.2
 302 first_layer_speed = 10
 303 gap_fill_speed = 20
 304 gcode_comments = 0
 305 infill_acceleration = 0
 306 infill_every_layers = 1
 307 infill_extruder = 1
 308 infill_extrusion_width = 0
 309 infill_first = 0
 310 infill_only_where_needed = 0
 311 infill_overlap = 15%
 312 infill_speed = 80
 313 interface_shells = 0
 314 layer_height = 0.2
 315 max_print_speed = 100
 316 max_volumetric_speed = 0
 317 min_skirt_length = 2
 318 notes =
 319 only_retract_when_crossing_perimeters = 1
 320 ooze_prevention = 0
 321 output_filename_format = [input_filename_base].gcode
 322 overhangs = 1
 323 perimeter_acceleration = 0
 324 perimeter_extruder = 1
 325 perimeter_extrusion_width = 0
 326 perimeter_speed = 60
 327 perimeters = 2
 328 post_process =
 329 raft_layers = 0
 330 resolution = 0
 331 seam_position = nearest
 332 skirt_distance = 5
 333 skirt_height = 1
 334 skirts = 2
 335 small_perimeter_speed = 20
 336 solid_infill_below_area = 30
 337 solid_infill_every_layers = 0
 338 solid_infill_extruder = 1
 339 solid_infill_extrusion_width = 0
 340 solid_infill_speed = 80
 341 spiral_vase = 0
 342 standby_temperature_delta = -5
 343 support_material = 0
 344 support_material_angle = 0
 345 support_material_contact_distance = 0
 346 support_material_enforce_layers = 0
 347 support_material_extruder = 1
 348 support_material_extrusion_width = 0
 349 support_material_interface_extruder = 1
 350 support_material_interface_layers = 0
 351 support_material_interface_spacing = 0
 352 support_material_interface_speed = 100%
 353 support_material_pattern = rectilinear
 354 support_material_spacing = 2.5
 355 support_material_speed = 40
 356 support_material_threshold = 45
 357 thin_walls = 1
 358 threads = 2
 359 top_infill_extrusion_width = 0
 360 top_solid_infill_speed = 20
 361 top_solid_layers = 4
 362 travel_speed = 100
 363 xy_size_compensation = 0
 364
 365 [print:MendelPro]
 366 avoid_crossing_perimeters = 0
 367 bottom_solid_layers = 4
 368 bridge_acceleration = 0
 369 bridge_flow_ratio = 1
 370 bridge_speed = 40
 371 brim_width = 1
 372 complete_objects = 0
 373 default_acceleration = 0
 374 dont_support_bridges = 1
 375 external_fill_pattern = rectilinear
 376 external_perimeter_extrusion_width = 0
 377 external_perimeter_speed = 20
 378 external_perimeters_first = 0
 379 extra_perimeters = 1
 380 extruder_clearance_height = 20
 381 extruder_clearance_radius = 20
 382 extrusion_width = 0
 383 fill_angle = 45
 384 fill_density = 20%
 385 fill_pattern = rectilinear
 386 first_layer_acceleration = 0
 387 first_layer_extrusion_width = 0
 388 first_layer_height = 0.2
 389 first_layer_speed = 10
 390 gap_fill_speed = 10
 391 gcode_comments = 0
 392 infill_acceleration = 0
 393 infill_every_layers = 1
 394 infill_extruder = 1
 395 infill_extrusion_width = 0
 396 infill_first = 0
 397 infill_only_where_needed = 0
 398 infill_overlap = 15%
 399 infill_speed = 0
 400 interface_shells = 0
 401 layer_height = 0.2
 402 max_print_speed = 80
 403 max_volumetric_speed = 0
 404 min_skirt_length = 2
 405 notes =
 406 only_retract_when_crossing_perimeters = 1
 407 ooze_prevention = 0
 408 output_filename_format = [input_filename_base].gcode
 409 overhangs = 1
 410 perimeter_acceleration = 0
 411 perimeter_extruder = 1
 412 perimeter_extrusion_width = 0
 413 perimeter_speed = 0
 414 perimeters = 2
 415 post_process =
 416 raft_layers = 0
 417 resolution = 0
 418 seam_position = nearest
 419 skirt_distance = 10
 420 skirt_height = 1
 421 skirts = 2
 422 small_perimeter_speed = 10
 423 solid_infill_below_area = 70
 424 solid_infill_every_layers = 0
 425 solid_infill_extruder = 1
 426 solid_infill_extrusion_width = 0
 427 solid_infill_speed = 0
 428 spiral_vase = 0
 429 standby_temperature_delta = -5
 430 support_material = 1
 431 support_material_angle = 0
 432 support_material_contact_distance = 0.4
 433 support_material_enforce_layers = 0
 434 support_material_extruder = 1
 435 support_material_extrusion_width = 0
 436 support_material_interface_extruder = 1
 437 support_material_interface_layers = 3
 438 support_material_interface_spacing = 0
 439 support_material_interface_speed = 100%
 440 support_material_pattern = pillars
 441 support_material_spacing = 3
 442 support_material_speed = 60
 443 support_material_threshold = 0
 444 thin_walls = 1
 445 threads = 2
 446 top_infill_extrusion_width = 0
 447 top_solid_infill_speed = 20
 448 top_solid_layers = 4
 449 travel_speed = 100
 450 xy_size_compensation = 0
 451
 452 [print:TinyBoy]
 453 avoid_crossing_perimeters = 0
 454 bottom_solid_layers = 3
 455 bridge_acceleration = 0
 456 bridge_flow_ratio = 1
 457 bridge_speed = 40
 458 brim_width = 0
 459 complete_objects = 0
 460 default_acceleration = 0
 461 dont_support_bridges = 1
 462 external_fill_pattern = rectilinear
 463 external_perimeter_extrusion_width = 0
 464 external_perimeter_speed = 20
 465 external_perimeters_first = 0
 466 extra_perimeters = 1
 467 extruder_clearance_height = 20
 468 extruder_clearance_radius = 20
 469 extrusion_width = 0
 470 fill_angle = 45
 471 fill_density = 20%
 472 fill_pattern = 3dhoneycomb
 473 first_layer_acceleration = 0
 474 first_layer_extrusion_width = 0
 475 first_layer_height = 0.2
 476 first_layer_speed = 10
 477 gap_fill_speed = 20
 478 gcode_comments = 0
 479 infill_acceleration = 0
 480 infill_every_layers = 1
 481 infill_extruder = 1
 482 infill_extrusion_width = 0
 483 infill_first = 0
 484 infill_only_where_needed = 0
 485 infill_overlap = 15%
 486 infill_speed = 0
 487 interface_shells = 0
 488 layer_height = 0.2
 489 max_print_speed = 80
 490 max_volumetric_speed = 0
 491 min_skirt_length = 1
 492 notes =
 493 only_retract_when_crossing_perimeters = 1
 494 ooze_prevention = 0
 495 output_filename_format = [input_filename_base].gcode
 496 overhangs = 1
 497 perimeter_acceleration = 0
 498 perimeter_extruder = 1
 499 perimeter_extrusion_width = 0
 500 perimeter_speed = 0
 501 perimeters = 2
 502 post_process =
 503 raft_layers = 0
 504 resolution = 0
 505 seam_position = nearest
 506 skirt_distance = 1
 507 skirt_height = 1
 508 skirts = 2
 509 small_perimeter_speed = 0
 510 solid_infill_below_area = 70
 511 solid_infill_every_layers = 0
 512 solid_infill_extruder = 1
 513 solid_infill_extrusion_width = 0
 514 solid_infill_speed = 0
 515 spiral_vase = 0
 516 standby_temperature_delta = -5
 517 support_material = 0
 518 support_material_angle = 0
 519 support_material_contact_distance = 0.2
 520 support_material_enforce_layers = 0
 521 support_material_extruder = 1
 522 support_material_extrusion_width = 0
 523 support_material_interface_extruder = 1
 524 support_material_interface_layers = 2
 525 support_material_interface_spacing = 0
 526 support_material_interface_speed = 100%
 527 support_material_pattern = rectilinear
 528 support_material_spacing = 5
 529 support_material_speed = 0
 530 support_material_threshold = 40
 531 thin_walls = 1
 532 threads = 2
 533 top_infill_extrusion_width = 0
 534 top_solid_infill_speed = 20
 535 top_solid_layers = 4
 536 travel_speed = 100
 537 xy_size_compensation = 0
 538
 539 [print:Toy]
 540 avoid_crossing_perimeters = 0
 541 bottom_solid_layers = 2
 542 bridge_acceleration = 0
 543 bridge_flow_ratio = 1
 544 bridge_speed = 0
 545 brim_width = 0
 546 complete_objects = 0
 547 default_acceleration = 0
 548 dont_support_bridges = 1
 549 external_fill_pattern = rectilinear
 550 external_perimeter_extrusion_width = 0
 551 external_perimeter_speed = 0
 552 external_perimeters_first = 0
 553 extra_perimeters = 1
 554 extruder_clearance_height = 20
 555 extruder_clearance_radius = 20
 556 extrusion_width = 0
 557 fill_angle = 45
 558 fill_density = 0%
 559 fill_pattern = rectilinear
 560 first_layer_acceleration = 0
 561 first_layer_extrusion_width = 0
 562 first_layer_height = 0.2
 563 first_layer_speed = 10
 564 gap_fill_speed = 0
 565 gcode_comments = 0
 566 infill_acceleration = 0
 567 infill_every_layers = 1
 568 infill_extruder = 1
 569 infill_extrusion_width = 0
 570 infill_first = 0
 571 infill_only_where_needed = 0
 572 infill_overlap = 15%
 573 infill_speed = 0
 574 interface_shells = 0
 575 layer_height = 0.2
 576 max_print_speed = 10
 577 max_volumetric_speed = 0
 578 min_skirt_length = 1
 579 notes =
 580 only_retract_when_crossing_perimeters = 1
 581 ooze_prevention = 0
 582 output_filename_format = [input_filename_base].gcode
 583 overhangs = 1
 584 perimeter_acceleration = 0
 585 perimeter_extruder = 1
 586 perimeter_extrusion_width = 0
 587 perimeter_speed = 0
 588 perimeters = 2
 589 post_process =
 590 raft_layers = 0
 591 resolution = 0
 592 seam_position = aligned
 593 skirt_distance = 1
 594 skirt_height = 1
 595 skirts = 2
 596 small_perimeter_speed = 0
 597 solid_infill_below_area = 70
 598 solid_infill_every_layers = 0
 599 solid_infill_extruder = 1
 600 solid_infill_extrusion_width = 0
 601 solid_infill_speed = 0
 602 spiral_vase = 0
 603 standby_temperature_delta = -5
 604 support_material = 1
 605 support_material_angle = 0
 606 support_material_contact_distance = 0.3
 607 support_material_enforce_layers = 0
 608 support_material_extruder = 1
 609 support_material_extrusion_width = 0
 610 support_material_interface_extruder = 1
 611 support_material_interface_layers = 3
 612 support_material_interface_spacing = 0
 613 support_material_interface_speed = 100%
 614 support_material_pattern = rectilinear
 615 support_material_spacing = 5
 616 support_material_speed = 0
 617 support_material_threshold = 40
 618 thin_walls = 1
 619 threads = 2
 620 top_infill_extrusion_width = 0
 621 top_solid_infill_speed = 0
 622 top_solid_layers = 0
 623 travel_speed = 100
 624 xy_size_compensation = 0
 625
 626 [print:prusa i3 200]
 627 avoid_crossing_perimeters = 1
 628 bottom_solid_layers = 4
 629 bridge_acceleration = 0
 630 bridge_flow_ratio = 1
 631 bridge_speed = 40
 632 brim_width = 1
 633 complete_objects = 0
 634 default_acceleration = 0
 635 dont_support_bridges = 1
 636 external_fill_pattern = rectilinear
 637 external_perimeter_extrusion_width = 0
 638 external_perimeter_speed = 20
 639 external_perimeters_first = 0
 640 extra_perimeters = 1
 641 extruder_clearance_height = 20
 642 extruder_clearance_radius = 20
 643 extrusion_width = 0
 644 fill_angle = 45
 645 fill_density = 20%
 646 fill_pattern = rectilinear
 647 first_layer_acceleration = 0
 648 first_layer_extrusion_width = 0
 649 first_layer_height = 0.2
 650 first_layer_speed = 15
 651 gap_fill_speed = 20
 652 gcode_comments = 0
 653 infill_acceleration = 0
 654 infill_every_layers = 1
 655 infill_extruder = 1
 656 infill_extrusion_width = 0
 657 infill_first = 0
 658 infill_only_where_needed = 0
 659 infill_overlap = 15%
 660 infill_speed = 0
 661 interface_shells = 0
 662 layer_height = 0.2
 663 max_print_speed = 50
 664 max_volumetric_speed = 0
 665 min_skirt_length = 3
 666 notes =
 667 only_retract_when_crossing_perimeters = 1
 668 ooze_prevention = 0
 669 output_filename_format = [input_filename_base].gcode
 670 overhangs = 1
 671 perimeter_acceleration = 0
 672 perimeter_extruder = 1
 673 perimeter_extrusion_width = 0
 674 perimeter_speed = 40
 675 perimeters = 3
 676 post_process =
 677 raft_layers = 0
 678 resolution = 0
 679 seam_position = nearest
 680 skirt_distance = 6
 681 skirt_height = 1
 682 skirts = 2
 683 small_perimeter_speed = 15
 684 solid_infill_below_area = 70
 685 solid_infill_every_layers = 0
 686 solid_infill_extruder = 1
 687 solid_infill_extrusion_width = 0
 688 solid_infill_speed = 0
 689 spiral_vase = 0
 690 standby_temperature_delta = -5
 691 support_material = 0
 692 support_material_angle = 0
 693 support_material_contact_distance = 0.2
 694 support_material_enforce_layers = 0
 695 support_material_extruder = 1
 696 support_material_extrusion_width = 0
 697 support_material_interface_extruder = 1
 698 support_material_interface_layers = 3
 699 support_material_interface_spacing = 0
 700 support_material_interface_speed = 10
 701 support_material_pattern = pillars
 702 support_material_spacing = 2.5
 703 support_material_speed = 40
 704 support_material_threshold = 40
 705 thin_walls = 1
 706 threads = 2
 707 top_infill_extrusion_width = 0
 708 top_solid_infill_speed = 20
 709 top_solid_layers = 4
 710 travel_speed = 100
 711 xy_size_compensation = 0
 712
 713 [print:prusa i3 vase]
 714 avoid_crossing_perimeters = 0
 715 bottom_solid_layers = 0
 716 bridge_acceleration = 0
 717 bridge_flow_ratio = 1
 718 bridge_speed = 40
 719 brim_width = 1
 720 complete_objects = 0
 721 default_acceleration = 0
 722 dont_support_bridges = 1
 723 external_fill_pattern = rectilinear
 724 external_perimeter_extrusion_width = 0
 725 external_perimeter_speed = 20
 726 external_perimeters_first = 0
 727 extra_perimeters = 1
 728 extruder_clearance_height = 20
 729 extruder_clearance_radius = 20
 730 extrusion_width = 0
 731 fill_angle = 45
 732 fill_density = 0%
 733 fill_pattern = rectilinear
 734 first_layer_acceleration = 0
 735 first_layer_extrusion_width = 0
 736 first_layer_height = 0.2
 737 first_layer_speed = 15
 738 gap_fill_speed = 20
 739 gcode_comments = 0
 740 infill_acceleration = 0
 741 infill_every_layers = 1
 742 infill_extruder = 1
 743 infill_extrusion_width = 0
 744 infill_first = 1
 745 infill_only_where_needed = 0
 746 infill_overlap = 15%
 747 infill_speed = 60
 748 interface_shells = 0
 749 layer_height = 0.2
 750 max_print_speed = 65
 751 max_volumetric_speed = 0
 752 min_skirt_length = 1
 753 notes =
 754 only_retract_when_crossing_perimeters = 1
 755 ooze_prevention = 0
 756 output_filename_format = [input_filename_base].gcode
 757 overhangs = 1
 758 perimeter_acceleration = 0
 759 perimeter_extruder = 1
 760 perimeter_extrusion_width = 0
 761 perimeter_speed = 40
 762 perimeters = 1
 763 post_process =
 764 raft_layers = 0
 765 resolution = 0
 766 seam_position = nearest
 767 skirt_distance = 1
 768 skirt_height = 1
 769 skirts = 2
 770 small_perimeter_speed = 20
 771 solid_infill_below_area = 70
 772 solid_infill_every_layers = 0
 773 solid_infill_extruder = 1
 774 solid_infill_extrusion_width = 0
 775 solid_infill_speed = 60
 776 spiral_vase = 1
 777 standby_temperature_delta = -5
 778 support_material = 0
 779 support_material_angle = 0
 780 support_material_contact_distance = 0.2
 781 support_material_enforce_layers = 0
 782 support_material_extruder = 1
 783 support_material_extrusion_width = 0
 784 support_material_interface_extruder = 1
 785 support_material_interface_layers = 3
 786 support_material_interface_spacing = 0
 787 support_material_interface_speed = 10
 788 support_material_pattern = pillars
 789 support_material_spacing = 2.5
 790 support_material_speed = 40
 791 support_material_threshold = 40
 792 thin_walls = 1
 793 threads = 2
 794 top_infill_extrusion_width = 0
 795 top_solid_infill_speed = 20
 796 top_solid_layers = 0
 797 travel_speed = 100
 798 xy_size_compensation = 0
 799
 800 [printer:Lulzbot]
 801 bed_shape = 0x0,298x0,298x275,0x275
 802 before_layer_gcode =
 803 end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors\n\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\n
 804 extruder_offset = 0x0
 805 gcode_flavor = reprap
 806 layer_gcode =
 807 nozzle_diameter = 0.35
 808 octoprint_apikey =
 809 octoprint_host =
 810 pressure_advance = 0
 811 retract_before_travel = 2
 812 retract_layer_change = 1
 813 retract_length = 3
 814 retract_length_toolchange = 3
 815 retract_lift = 0
 816 retract_restart_extra = 0
 817 retract_restart_extra_toolchange = 0
 818 retract_speed = 40
 819 start_gcode = G28 ; home all axes\n
 820 toolchange_gcode =
 821 use_firmware_retraction = 0
 822 use_relative_e_distances = 0
 823 use_volumetric_e = 0
 824 vibration_limit = 0
 825 wipe = 0
 826 z_offset = 0
 827
 828 [printer:MendelPro]
 829 bed_shape = 0x0,220x0,220x177,0x177
 830 before_layer_gcode =
 831 end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nG0 Y177;\nM84               ; disable motors\n
 832 extruder_offset = 0x0
 833 gcode_flavor = reprap
 834 layer_gcode =
 835 nozzle_diameter = 0.5
 836 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 837 octoprint_host =
 838 pressure_advance = 0
 839 retract_before_travel = 2
 840 retract_layer_change = 1
 841 retract_length = 5
 842 retract_length_toolchange = 10
 843 retract_lift = 0
 844 retract_restart_extra = 0
 845 retract_restart_extra_toolchange = 0
 846 retract_speed = 40
 847 start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\n
 848 toolchange_gcode =
 849 use_firmware_retraction = 0
 850 use_relative_e_distances = 0
 851 use_volumetric_e = 0
 852 vibration_limit = 0
 853 wipe = 0
 854 z_offset = 0
 855
 856 [printer:TinyBoy]
 857 bed_shape = 0x0,88x0,88x74,0x74
 858 before_layer_gcode =
 859 end_gcode = M104 S0        ; turn off temperature\nG28 X0           ; home X axis\nM84               ; disable motors\n
 860 extruder_offset = 0x0
 861 gcode_flavor = reprap
 862 layer_gcode =
 863 nozzle_diameter = 0.4
 864 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 865 octoprint_host =
 866 pressure_advance = 0
 867 retract_before_travel = 2
 868 retract_layer_change = 1
 869 retract_length = 5
 870 retract_length_toolchange = 10
 871 retract_lift = 0
 872 retract_restart_extra = 0
 873 retract_restart_extra_toolchange = 0
 874 retract_speed = 40
 875 start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
 876 toolchange_gcode =
 877 use_firmware_retraction = 0
 878 use_relative_e_distances = 0
 879 use_volumetric_e = 0
 880 vibration_limit = 0
 881 wipe = 0
 882 z_offset = 0
 883
 884 [printer:Toyrep]
 885 bed_shape = 0x0,125x0,125x125,0x125
 886 before_layer_gcode =
 887 end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors
 888 extruder_offset = 0x0
 889 gcode_flavor = reprap
 890 layer_gcode =
 891 nozzle_diameter = 0.4
 892 octoprint_apikey =
 893 octoprint_host =
 894 pressure_advance = 0
 895 retract_before_travel = 2
 896 retract_layer_change = 1
 897 retract_length = 0
 898 retract_length_toolchange = 3
 899 retract_lift = 0
 900 retract_restart_extra = 0
 901 retract_restart_extra_toolchange = 0
 902 retract_speed = 10
 903 start_gcode = \n
 904 toolchange_gcode =
 905 use_firmware_retraction = 0
 906 use_relative_e_distances = 0
 907 use_volumetric_e = 0
 908 vibration_limit = 0
 909 wipe = 0
 910 z_offset = 0
 911
 912 [printer:prusa i3]
 913 bed_shape = 0x0,190x0,190x220,0x220
 914 before_layer_gcode =
 915 end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\nM81               ; Power off\n\n
 916 extruder_offset = 0x0
 917 gcode_flavor = reprap
 918 layer_gcode =
 919 nozzle_diameter = 0.4
 920 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 921 octoprint_host =
 922 pressure_advance = 0
 923 retract_before_travel = 2
 924 retract_layer_change = 0
 925 retract_length = 3
 926 retract_length_toolchange = 10
 927 retract_lift = 0
 928 retract_restart_extra = 0
 929 retract_restart_extra_toolchange = 0
 930 retract_speed = 40
 931 start_gcode = G28 Z            ; home Z\n;G0 Z1            ; lift Z\nG28 X Y         ; home X Y\nG0         Y40 ; clab move
 932 toolchange_gcode = M83 ; turn on relative movement for extruder  \nG1 E-5  ; retract filament 5mm  \nG1 X10 Y10 Z4.000000  ; home X and Y axis leave Z at current height  \nM84 E ; release extruder stepper motor from 'holding' position  \n@pause ; pause print!  \nG1 E0 ; reset extruder, ready to push out plastic again  \nM82 ; set extruder movement back to absolute ready for next layer
 933 use_firmware_retraction = 1
 934 use_relative_e_distances = 0
 935 use_volumetric_e = 0
 936 vibration_limit = 0
 937 wipe = 0
 938 z_offset = 0
 939
 940 [settings]
 941 autocenter = 1
 942 mode = expert