SCB_CLKOUTCLKSEL = SCB_MAINCLKSEL_SOURCE_WDTOSC;
SCB_CLKOUTCLKUEN = SCB_CLKOUTCLKUEN_DISABLE;
SCB_CLKOUTCLKUEN = SCB_CLKOUTCLKUEN_UPDATE;
- SCB_CLKOUTCLKDIV = 30;
+ SCB_CLKOUTCLKDIV = 75;
}
void badge_init(void) {
-#define INPUT_PIN_CONFIG(spec, mode) do { \
- HOB_SET_PIN_FUNC(spec, GPIO); \
- gpioSetDir(HOB_PORT(spec), HOB_PIN(spec), gpioDirection_Input); \
- gpioSetPullup(&HOB_IOCON(spec), (mode)); \
+#define INPUT_PIN_CONFIG(spec, mode) do { \
+ HOB_SET_PIN_FUNC(spec, GPIO); \
+ gpioSetDir(HOB_PORT(spec), HOB_PIN(spec), gpioDirection_Input); \
+ gpioSetPullup(&HOB_IOCON(spec), (mode)); \
} while(0)
-#ifdef HOB_REV2
INPUT_PIN_CONFIG(HOB_BTN_UP , gpioPullupMode_PullUp);
INPUT_PIN_CONFIG(HOB_BTN_RIGHT , gpioPullupMode_PullUp);
INPUT_PIN_CONFIG(HOB_BTN_DOWN , gpioPullupMode_PullUp);
INPUT_PIN_CONFIG(HOB_BTN_LEFT , gpioPullupMode_PullUp);
INPUT_PIN_CONFIG(HOB_BTN_A , gpioPullupMode_PullUp);
INPUT_PIN_CONFIG(HOB_BTN_B , gpioPullupMode_PullUp);
-#else
- INPUT_PIN_CONFIG(HOB_BTN_UP , gpioPullupMode_PullDown);
- INPUT_PIN_CONFIG(HOB_BTN_RIGHT , gpioPullupMode_PullDown);
- INPUT_PIN_CONFIG(HOB_BTN_DOWN , gpioPullupMode_PullDown);
- INPUT_PIN_CONFIG(HOB_BTN_LEFT , gpioPullupMode_PullDown);
- INPUT_PIN_CONFIG(HOB_BTN_CENTER, gpioPullupMode_PullDown);
- INPUT_PIN_CONFIG(HOB_BTN_A , gpioPullupMode_PullDown);
- INPUT_PIN_CONFIG(HOB_BTN_B , gpioPullupMode_PullDown);
-#endif
#undef INPUT_PIN_CONFIG
-#define OUTPUT_PIN_CONFIG(spec, value) do { \
- HOB_SET_PIN_FUNC(spec, GPIO); \
- gpioSetDir(HOB_PORT(spec), HOB_PIN(spec), gpioDirection_Output); \
- gpioSetValue(HOB_PORT(spec), HOB_PIN(spec), (value)); \
+#define OUTPUT_PIN_CONFIG(spec, value) do { \
+ HOB_SET_PIN_FUNC(spec, GPIO); \
+ gpioSetDir(HOB_PORT(spec), HOB_PIN(spec), gpioDirection_Output); \
+ gpioSetValue(HOB_PORT(spec), HOB_PIN(spec), (value)); \
} while(0)
OUTPUT_PIN_CONFIG(HOB_USB_CONNECT , 1);
OUTPUT_PIN_CONFIG(HOB_LCD_CS , 1);
OUTPUT_PIN_CONFIG(HOB_LCD_RST , 1);
OUTPUT_PIN_CONFIG(HOB_DATAFLASH_CS, 1);
-
-#ifdef HOB_REV2
OUTPUT_PIN_CONFIG(HOB_LED_LEFT , 0);
OUTPUT_PIN_CONFIG(HOB_LED_RIGHT , 0);
-#endif
#undef OUTPUT_PIN_CONFIG