See changelog

[hackover2013-badge-firmware.git] / build / codelite / LPC1343_CodeBase.project

diff --git a/build/codelite/LPC1343_CodeBase.project b/build/codelite/LPC1343_CodeBase.project
index 1deddee..655a180 100644 (file)
--- a/build/codelite/LPC1343_CodeBase.project
+++ b/build/codelite/LPC1343_CodeBase.project
@@ -234,6 +234,13 @@
         <File Name="../../drivers/rtc/isl12022m/isl12022m.h"/>
       </VirtualDirectory>
     </VirtualDirectory>
+    <VirtualDirectory Name="spiflash">
+      <File Name="../../drivers/spiflash/spiflash.h"/>
+      <VirtualDirectory Name="w25q16bv">
+        <File Name="../../drivers/spiflash/w25q16bv/w25q16bv.c"/>
+        <File Name="../../drivers/spiflash/w25q16bv/w25q16bv.h"/>
+      </VirtualDirectory>
+    </VirtualDirectory>
   </VirtualDirectory>
   <VirtualDirectory Name="lpc1xxx">
     <File Name="../../lpc1xxx/linkscript.ld"/>
@@ -295,33 +302,43 @@
       <ResourceCompiler Options=""/>
     </GlobalSettings>
     <Configuration Name="Debug" CompilerType="gnu gcc" DebuggerType="GNU gdb debugger" Type="Dynamic Library" BuildCmpWithGlobalSettings="append" BuildLnkWithGlobalSettings="append" BuildResWithGlobalSettings="append">
-      <Compiler Options="-g" C_Options="-g" Required="yes" PreCompiledHeader="">
+      <Compiler Options="-g" C_Options="-g" Required="yes" PreCompiledHeader="" PCHInCommandLine="no" UseDifferentPCHFlags="no" PCHFlags="">
         <IncludePath Value="."/>
       </Compiler>
       <Linker Options="" Required="yes"/>
       <ResourceCompiler Options="" Required="no"/>
-      <General OutputFile="" IntermediateDirectory="./Debug" Command="" CommandArguments="" UseSeparateDebugArgs="no" DebugArguments="" WorkingDirectory="$(IntermediateDirectory)" PauseExecWhenProcTerminates="yes"/>
-      <Environment EnvVarSetName="&lt;Use Defaults&gt;" DbgSetName="&lt;Use Defaults&gt;"/>
+      <General OutputFile="" IntermediateDirectory="../../" Command="firmware.elf" CommandArguments="" UseSeparateDebugArgs="no" DebugArguments="" WorkingDirectory="$(IntermediateDirectory)" PauseExecWhenProcTerminates="yes"/>
+      <Environment EnvVarSetName="&lt;Use Defaults&gt;" DbgSetName="&lt;Use Defaults&gt;">
+        <![CDATA[]]>
+      </Environment>
       <Debugger IsRemote="yes" RemoteHostName="localhost" RemoteHostPort="2331" DebuggerPath="arm-none-eabi-gdb.exe">
-        <PostConnectCommands># Make sure that we are using SWD
+        <PostConnectCommands/>
+        <StartupCommands># Make sure that we are using SWD
 monitor interface SWD
+
 # Set monitor to little endian
 monitor endian little
+
 # Set monitor speed
 monitor speed 1000
+
 # Reset device
 monitor reset
+
 # Set device ID to LPC1343
 monitor flash device = LPC1343
+
 # Enable flash download
 monitor flash download = 1
+
 # Transfer the firmware to the device
 load "../../firmware.elf"
+
 # Initializing PC and stack pointer
 monitor reg r13 = (0x00000000)
 monitor reg pc = (0x00000004)
-</PostConnectCommands>
-        <StartupCommands/>
+
+monitor reset</StartupCommands>
       </Debugger>
       <PreBuild/>
       <PostBuild/>
@@ -339,15 +356,22 @@ monitor reg pc = (0x00000004)
         <CustomPostBuild/>
         <CustomPreBuild/>
       </AdditionalRules>
+      <Completion>
+        <ClangCmpFlags/>
+        <ClangPP/>
+        <SearchPaths/>
+      </Completion>
     </Configuration>
     <Configuration Name="Release" CompilerType="gnu gcc" DebuggerType="GNU gdb debugger" Type="Dynamic Library" BuildCmpWithGlobalSettings="append" BuildLnkWithGlobalSettings="append" BuildResWithGlobalSettings="append">
-      <Compiler Options="" C_Options="" Required="yes" PreCompiledHeader="">
+      <Compiler Options="" C_Options="" Required="yes" PreCompiledHeader="" PCHInCommandLine="no" UseDifferentPCHFlags="no" PCHFlags="">
         <IncludePath Value="."/>
       </Compiler>
       <Linker Options="-O2" Required="yes"/>
       <ResourceCompiler Options="" Required="no"/>
       <General OutputFile="" IntermediateDirectory="./Release" Command="" CommandArguments="" UseSeparateDebugArgs="no" DebugArguments="" WorkingDirectory="$(IntermediateDirectory)" PauseExecWhenProcTerminates="yes"/>
-      <Environment EnvVarSetName="&lt;Use Defaults&gt;" DbgSetName="&lt;Use Defaults&gt;"/>
+      <Environment EnvVarSetName="&lt;Use Defaults&gt;" DbgSetName="&lt;Use Defaults&gt;">
+        <![CDATA[]]>
+      </Environment>
       <Debugger IsRemote="no" RemoteHostName="" RemoteHostPort="" DebuggerPath="">
         <PostConnectCommands/>
         <StartupCommands/>
@@ -368,6 +392,11 @@ monitor reg pc = (0x00000004)
         <CustomPostBuild/>
         <CustomPreBuild/>
       </AdditionalRules>
+      <Completion>
+        <ClangCmpFlags/>
+        <ClangPP/>
+        <SearchPaths/>
+      </Completion>
     </Configuration>
   </Settings>
 </CodeLite_Project>