+++ /dev/null
-/**************************************************************************/
-/*!
- @file ssd1306.h
- @author K. Townsend (microBuilder.eu)
- @date 18 January 2012
- @version 0.10
-
- @section LICENSE
-
- Software License Agreement (BSD License)
-
- Copyright (c) 2012, microBuilder SARL
- All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holders nor the
- names of its contributors may be used to endorse or promote products
- derived from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-/**************************************************************************/
-#ifndef __SSD1306_H__
-#define __SSD1306_H__
-
-#include "projectconfig.h"
-
-#include "drivers/lcd/smallfonts.h"
-
-/*=========================================================================
- SSD1306 Displays
- -----------------------------------------------------------------------
- The driver is used in multiple displays (128x64, 128x32, etc.).
- Select the appropriate display below to create an appropriately
- sized framebuffer, etc.
-
- SSD1306_128_64 128x64 pixel display
-
- SSD1306_128_32 128x32 pixel display
-
- You also need to set the LCDWIDTH and LCDHEIGHT defines to an
- appropriate size
-
- -----------------------------------------------------------------------*/
- // #define SSD1306_128_64
- #define SSD1306_128_32
-/*=========================================================================*/
-
-#if defined SSD1306_128_64 && defined SSD1306_128_32
- #error "Only one SSD1306 display can be specified at once in ssd1306.h"
-#endif
-#if !defined SSD1306_128_64 && !defined SSD1306_128_32
- #error "At least one SSD1306 display must be specified in ssd1306.h"
-#endif
-
-#if defined SSD1306_128_64
- #define SSD1306_LCDWIDTH 128
- #define SSD1306_LCDHEIGHT 64
-#endif
-#if defined SSD1306_128_32
- #define SSD1306_LCDWIDTH 128
- #define SSD1306_LCDHEIGHT 32
-#endif
-
-// Pin Definitions
-#define SSD1306_DC_PORT (2) // Data/Command
-#define SSD1306_DC_PIN (1)
-#define SSD1306_RST_PORT (2) // Reset
-#define SSD1306_RST_PIN (2)
-#define SSD1306_CS_PORT (2) // Select
-#define SSD1306_CS_PIN (3)
-#define SSD1306_SCLK_PORT (2) // Serial Clock
-#define SSD1306_SCLK_PIN (5)
-#define SSD1306_SDAT_PORT (2) // Serial Data
-#define SSD1306_SDAT_PIN (6)
-
-
-// Commands
-#define SSD1306_SETCONTRAST 0x81
-#define SSD1306_DISPLAYALLON_RESUME 0xA4
-#define SSD1306_DISPLAYALLON 0xA5
-#define SSD1306_NORMALDISPLAY 0xA6
-#define SSD1306_INVERTDISPLAY 0xA7
-#define SSD1306_DISPLAYOFF 0xAE
-#define SSD1306_DISPLAYON 0xAF
-#define SSD1306_SETDISPLAYOFFSET 0xD3
-#define SSD1306_SETCOMPINS 0xDA
-#define SSD1306_SETVCOMDETECT 0xDB
-#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
-#define SSD1306_SETPRECHARGE 0xD9
-#define SSD1306_SETMULTIPLEX 0xA8
-#define SSD1306_SETLOWCOLUMN 0x00
-#define SSD1306_SETHIGHCOLUMN 0x10
-#define SSD1306_SETSTARTLINE 0x40
-#define SSD1306_MEMORYMODE 0x20
-#define SSD1306_COMSCANINC 0xC0
-#define SSD1306_COMSCANDEC 0xC8
-#define SSD1306_SEGREMAP 0xA0
-#define SSD1306_CHARGEPUMP 0x8D
-#define SSD1306_EXTERNALVCC 0x1
-#define SSD1306_INTERNALVCC 0x2
-#define SSD1306_SWITCHCAPVCC 0x2
-
-// Initialisation/Config Prototypes
-void ssd1306Init ( uint8_t vccstate );
-void ssd1306DrawPixel ( uint8_t x, uint8_t y );
-void ssd1306ClearPixel ( uint8_t x, uint8_t y );
-uint8_t ssd1306GetPixel ( uint8_t x, uint8_t y );
-void ssd1306ClearScreen ( void );
-void ssd1306Refresh ( void );
-void ssd1306DrawString( uint16_t x, uint16_t y, char* text, struct FONT_DEF font );
-void ssd1306ShiftFrameBuffer( uint8_t height );
-
-#endif
projects / hackover2013-badge-firmware.git / blobdiff