-v0.9.2 - Ongoing
+v0.9.8 - Ongoing
================
+- updated touchscreen.h to be a bit clearer during
+ calibration, though it can still be much better
+ organised
+- Had to add "__asm volatile("nop");" after pin writes
+ in the ILI9328 driver since some LCDs couldn't
+ keep up with the high-speed writes with bit-banding
+- Fixed I2C clock duty cycle registers
+- Changed I2C buffer size from 32 to 64 bytes (i2c.h)
+- Added CFG_BRD_LPC1343_OLIMEX_P to board selection
+ in projectconfig.h (courtesy PHK)
+- Added SSD1331_COLORORDER_RGB flag to SSD1331.h to
+ select between RGB and BGR color order
+- Added 128x32 support to ssd1306.c and rewrote
+ initialize sequence for 128x32 and 128x64 displays
+- Added driver for Sharp Memory Display
+ /drivers/lcd/bitmap/sharpmem
+- Added SPI Flash example
+ /tools/examples/spiflash/*
+- Added write function to SPI Flash driver
+ /drivers/spiflash/*
+- Added CFG_BRD_LPC1343_REFDESIGN_MINIMAL as a board
+ option in projectconfig.h. Tries to keep the flash
+ use as small as possible by initialising less
+ peripherals in systemInit().
+- Changed CodeLite project files to support real
+ debugging with a Segger J-Link and GDB Server.
+- Fixed issue with USB CDC instantiation for
+ FreeBSD (courtesy PHK)
+- Added experimental SSD1351 OLED driver to
+ /drivers/lcd/tft/hw
+v0.9.5 - 3 August 2011
+======================
+
+- Redid the font rendering code to use DotFactory
+ generated fonts, and update to the latest binary
+ in the /tools folder. All fonts have been
+ re-rendered to accomodate the updated code.
+- Updated clock values in cpu.c for PLL to match FCCO
+ range of 156-320MHz
+- Changed SCB_PLLCTRL_MULT_* to SCB_PLLCTRL_MSEL_* in
+ lpc111x.h to match usermanual
+- Changed SCB_PLLCTRL_DIV_* SCB_PLLCTRL_PSEL_* in
+ lpc111x.h to match usermanual
+- Added inline version of key functions in ili9328.c,
+ which increases the code size ~1.3KB but more than
+ doubles the drawing speed for most drawing functions
+ by avoiding branch operations and pushing and popping
+ the stack multiple times. Inline methods can be
+ toggled with 'ILI9238_USE_INLINE_METHODS'.
+- Fixed IOCON_SWDIO_PIO1_3_FUNC_CT32B1_MAT2 in lpc134x.h
+- Added drawCornerFilled() to drawing.c and LCD CLI
+- Fixed a nasty bug with 'gpioInterruptEvent' in the
+ gpioSetInterrupt function (core/gpio/gpio.c)
+- Add drawTriangle() and drawTriangleFilled() to
+ drawing.c and LCD CLI
+- Added cpuReset() to reset the board via AIRCR
+- Removed text input dialogue from LCD CLI ('T') to
+ save a few KB. Command file still exists, just no
+ longer included in cmd_tbl.h by default.
+
+v0.9.2 - 14 June 2011
+=====================
+
+- Added ISL12022M RTC Driver (/drivers/rtc/isl12022m)
+- Fixed a bug drawing filled circles with lcdDrawVLine
+- Added CLI command to toggle LCD backlight
+- Added rounded rectangle command to CLI
+- Added CFG_INTERFACE_DROPCR to projectconfig.h to
+ ignore CR (\r) characters in incoming data for
+ the CLI
+- Added CFG_INTERFACE_SHORTERRORS to projectconfig.h
+ to only send short (1 char + new line) CLI error
+ messages rather than something verbose
+- Added CFG_INTERFACE_CONFIRMREADY to projectconfig.h
+ to provide a character to indicate when a command
+ is complete in case the IRQ pin
+ (CFG_INTERFACE_ENABLEIRQ) can't be used
+- Fixed a bug with reversed R and B bits when reading
+ a pixel from the LCD in CLI mode
- Added lcdDrawPixels() to lcd.h and the current lcd
drivers to render rows of raw lcd data much quicker
than addressing consecutive pixels individually.
projects / hackover2013-badge-firmware.git / blobdiff