Fixed typos

[hackover2013-badge-firmware.git] / drivers / displays / tft / hw / readme.txt

diff --git a/drivers/displays/tft/hw/readme.txt b/drivers/displays/tft/hw/readme.txt
index 6e318f8..9635fc6 100644 (file)
--- a/drivers/displays/tft/hw/readme.txt
+++ b/drivers/displays/tft/hw/readme.txt
@@ -1,5 +1,5 @@
-HW-Specific LCD Drivers
-=======================
+HW-Specific TFT and RGB OLED Drivers
+====================================

 
 hx8340b   - 176x220 16-bit display (Bit-banged SPI interface)
 ILI9325   - 240x320 16-bit display  (8-bit interface)
 
 hx8340b   - 176x220 16-bit display (Bit-banged SPI interface)
 ILI9325   - 240x320 16-bit display  (8-bit interface)


@@ -9,8 +9,9 @@ st7783    - 240x320 16-bit display  (8-bit interface)
 ssd1331   - 96x64 16-bit OLED display (Bit-banged SPI interface) 
 ssd1351   - 128x128 16-bit OLED display (Bit-banged SPI interface)
 
 ssd1331   - 96x64 16-bit OLED display (Bit-banged SPI interface) 
 ssd1351   - 128x128 16-bit OLED display (Bit-banged SPI interface)
 

-
-NOTE: Only the ILI9325 and ILI9328 drivers have been fully tested.
-The others are incomplete or have only been partially tested. (The
+NOTE: Only ILI9328 driver have been fully tested. The others may
+be incomplete, or have only been partially tested. (The

 ST7783 driver, for example, has issues when the screen orientation
 ST7783 driver, for example, has issues when the screen orientation

-is set to landscape.)
\ No newline at end of file
+is set to landscape.)  The basic initialisation sequences should
+all work, but some further optimisation is likely required on some
+of these to get the best possible performance out of them.
\ No newline at end of file