fix email

[hackover2013-badge-firmware.git] / projectconfig.h

diff --git a/projectconfig.h b/projectconfig.h
index 1d69e9c..de7d9c6 100644 (file)
--- a/projectconfig.h
+++ b/projectconfig.h
@@ -7,7 +7,7 @@
 
     Software License Agreement (BSD License)
 
 
     Software License Agreement (BSD License)
 

-    Copyright (c) 2010, microBuilder SARL
+    Copyright (c) 2012, microBuilder SARL

     All rights reserved.
 
     Redistribution and use in source and binary forms, with or without
     All rights reserved.
 
     Redistribution and use in source and binary forms, with or without


@@ -110,13 +110,24 @@
 
         microBuilder.eu USB stick 802.15.4 868/915MHz RF transceiver
 
 
         microBuilder.eu USB stick 802.15.4 868/915MHz RF transceiver
 

+    CFG_BRD_LPC1343_OLIMEX_P
+    ==============================
+
+        Simple Olimex LPC1343 breakout board
+
+    CFG_BRD_LPC1343_LPCXPRESSO
+    ==============================
+
+        LPC1343 LPCXpresso board
+

     -----------------------------------------------------------------------*/
     -----------------------------------------------------------------------*/

-    // #define CFG_BRD_LPC1343_REFDESIGN
-    // #define CFG_BRD_LPC1343_REFDESIGN_MINIMAL
-    #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB
+// #define CFG_BRD_LPC1343_REFDESIGN
+#define CFG_BRD_LPC1343_REFDESIGN_MINIMAL
+    // #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB

     // #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
     // #define CFG_BRD_LPC1343_802154USBSTICK
     // #define CFG_BRD_LPC1343_OLIMEX_P
     // #define CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
     // #define CFG_BRD_LPC1343_802154USBSTICK
     // #define CFG_BRD_LPC1343_OLIMEX_P

+    // #define CFG_BRD_LPC1343_LPCXPRESSO

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -141,7 +152,7 @@
     ST7565      X X  X  X     X X X X X X X X X     . . . X
     ST7735      . .  .  .     X X X X X X . . .     . . . .
     SHARPMEM    . .  .  .     X X X X . . . . .     . . . .
     ST7565      X X  X  X     X X X X X X X X X     . . . X
     ST7735      . .  .  .     X X X X X X . . .     . . . .
     SHARPMEM    . .  .  .     X X X X . . . . .     . . . .

-    SSD1306     . .  .  .     X X X . X X . . .     . . . .
+    SSD1306 SPI . .  .  .     X X X . X X . . .     . . . .

     SSD1351     . .  .  .     X X X X X . . . .     . . . .
     MCP121      . .  .  .     . . . . . . . . .     . X . .
     PN532 [3]   . .  .  .     . . . . . . . . .     . X X . 
     SSD1351     . .  .  .     X X X X X . . . .     . . . .
     MCP121      . .  .  .     . . . . . . . . .     . X . .
     PN532 [3]   . .  .  .     . . . . . . . . .     . X X . 


@@ -160,14 +171,14 @@
     ST7565      .     .     .     .       .       X X X X     .
     ST7535      .     .     .     .       .       . . . .     .
     SHARPMEM    .     .     .     .       .       . . . .     .
     ST7565      .     .     .     .       .       X X X X     .
     ST7535      .     .     .     .       .       . . . .     .
     SHARPMEM    .     .     .     .       .       . . . .     .

-    SSD1306     .     .     .     .       .       . . . .     .
+    SSD1306 SPI .     .     .     .       .       . . . .     .

     INTERFACE   .     .     .     .       .       . . . .     X[2]
 
     [1]  PMU uses 32-bit Timer 0 for SW wakeup from deep-sleep.  This timer
          can safely be used by other peripherals, but may need to be
          reconfigured when you wakeup from deep-sleep.
     [2]  INTERFACE can be configured to use either USBCDC or UART
     INTERFACE   .     .     .     .       .       . . . .     X[2]
 
     [1]  PMU uses 32-bit Timer 0 for SW wakeup from deep-sleep.  This timer
          can safely be used by other peripherals, but may need to be
          reconfigured when you wakeup from deep-sleep.
     [2]  INTERFACE can be configured to use either USBCDC or UART

-    [3]  3.2 only used when with the I2C bus (for IRQ)
+    [3]  P3.2 is only used with the I2C bus (for IRQ)

 
  **************************************************************************/
 
 
  **************************************************************************/
 


@@ -184,10 +195,13 @@
     ISL12022M (SRAM)            0xAE      1010111x
     LM75B                       0x90      1001000x
     MCP24AA                     0xA0      1010000x
     ISL12022M (SRAM)            0xAE      1010111x
     LM75B                       0x90      1001000x
     MCP24AA                     0xA0      1010000x

-    MCP4725                     0xC0      1100000x
+    MCP4725                     0xC0      1100000x ***
+    TEA5767                     0xC0      1100000x ***

     TSL2561                     0x72      0111001x
     TCS3414                     0x72      0111001x
     PN532                       0x48      0100100x
     TSL2561                     0x72      0111001x
     TCS3414                     0x72      0111001x
     PN532                       0x48      0100100x

+    SSD1306_I2C                 0x78      0111100x  // Assumes SA0 = GND
+    INA219                      0xF0      10000000x // Assumes A0+A1 = GND

 
     [1]  Alternative addresses may exists, but the addresses listed in this
          table are the values used in the code base
 
     [1]  Alternative addresses may exists, but the addresses listed in this
          table are the values used in the code base


@@ -198,9 +212,9 @@
 /*=========================================================================
     FIRMWARE VERSION SETTINGS
     -----------------------------------------------------------------------*/
 /*=========================================================================
     FIRMWARE VERSION SETTINGS
     -----------------------------------------------------------------------*/

-    #define CFG_FIRMWARE_VERSION_MAJOR            (0)
-    #define CFG_FIRMWARE_VERSION_MINOR            (9)
-    #define CFG_FIRMWARE_VERSION_REVISION         (8)
+    #define CFG_FIRMWARE_VERSION_MAJOR            (1)
+    #define CFG_FIRMWARE_VERSION_MINOR            (1)
+    #define CFG_FIRMWARE_VERSION_REVISION         (0)

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -293,6 +307,13 @@
       // #define GPIO_ENABLE_IRQ2
       // #define GPIO_ENABLE_IRQ3
     #endif
       // #define GPIO_ENABLE_IRQ2
       // #define GPIO_ENABLE_IRQ3
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define GPIO_ENABLE_IRQ0
+      #define GPIO_ENABLE_IRQ1
+      // #define GPIO_ENABLE_IRQ2
+      // #define GPIO_ENABLE_IRQ3
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -358,6 +379,11 @@
       #define CFG_UART_BAUDRATE           (115200)
       #define CFG_UART_BUFSIZE            (512)
     #endif
       #define CFG_UART_BAUDRATE           (115200)
       #define CFG_UART_BUFSIZE            (512)
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_UART_BAUDRATE           (115200)
+      #define CFG_UART_BUFSIZE            (512)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -393,6 +419,11 @@
       #define CFG_SSP0_SCKPIN_2_11
       // #define CFG_SSP0_SCKPIN_0_6
     #endif
       #define CFG_SSP0_SCKPIN_2_11
       // #define CFG_SSP0_SCKPIN_0_6
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_SSP0_SCKPIN_2_11
+      // #define CFG_SSP0_SCKPIN_0_6
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -435,6 +466,11 @@
       #define ADC_AVERAGING_ENABLE    (0)
       #define ADC_AVERAGING_SAMPLES   (5)
     #endif
       #define ADC_AVERAGING_ENABLE    (0)
       #define ADC_AVERAGING_SAMPLES   (5)
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define ADC_AVERAGING_ENABLE    (0)
+      #define ADC_AVERAGING_SAMPLES   (5)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -482,6 +518,13 @@
       #define CFG_LED_ON                  (0)
       #define CFG_LED_OFF                 (1)
     #endif
       #define CFG_LED_ON                  (0)
       #define CFG_LED_OFF                 (1)
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_LED_PORT                (0)
+      #define CFG_LED_PIN                 (7)
+      #define CFG_LED_ON                  (0)
+      #define CFG_LED_OFF                 (1)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -543,6 +586,13 @@
       #define CFG_SDCARD_CDPORT           (3)
       #define CFG_SDCARD_CDPIN            (0)
     #endif
       #define CFG_SDCARD_CDPORT           (3)
       #define CFG_SDCARD_CDPIN            (0)
     #endif

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_SDCARD
+      #define CFG_SDCARD_READONLY         (1) // Must be 0 or 1
+      #define CFG_SDCARD_CDPORT           (3)
+      #define CFG_SDCARD_CDPIN            (0)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -567,9 +617,12 @@
                               CDC (see 'puts' in systeminit.c).
 
     -----------------------------------------------------------------------*/
                               CDC (see 'puts' in systeminit.c).
 
     -----------------------------------------------------------------------*/

+#define CFG_USBMSC (1)
+
+

     #define CFG_USB_VID                   (0x239A)
     #define CFG_USB_PID                   (0x1002)
     #define CFG_USB_VID                   (0x239A)
     #define CFG_USB_PID                   (0x1002)

-
+       

     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_USBHID
       #define CFG_USBCDC
     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_USBHID
       #define CFG_USBCDC


@@ -617,6 +670,14 @@
       #define CFG_USBCDC_INITTIMEOUT      (5000)
       #define CFG_USBCDC_BUFFERSIZE       (256)
     #endif     
       #define CFG_USBCDC_INITTIMEOUT      (5000)
       #define CFG_USBCDC_BUFFERSIZE       (256)
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_USBHID
+      #define CFG_USBCDC
+      #define CFG_USBCDC_BAUDRATE         (115200)
+      #define CFG_USBCDC_INITTIMEOUT      (5000)
+      #define CFG_USBCDC_BUFFERSIZE       (256)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -624,6 +685,7 @@
     PRINTF REDIRECTION
     -----------------------------------------------------------------------
 
     PRINTF REDIRECTION
     -----------------------------------------------------------------------
 

+    CFG_PRINTF_MAXSTRINGSIZE  Maximum size of string buffer for printf

     CFG_PRINTF_UART           Will cause all printf statements to be 
                               redirected to UART
     CFG_PRINTF_USBCDC         Will cause all printf statements to be
     CFG_PRINTF_UART           Will cause all printf statements to be 
                               redirected to UART
     CFG_PRINTF_USBCDC         Will cause all printf statements to be


@@ -635,40 +697,53 @@
     output will be ignored.
     -----------------------------------------------------------------------*/
     #ifdef CFG_BRD_LPC1343_REFDESIGN
     output will be ignored.
     -----------------------------------------------------------------------*/
     #ifdef CFG_BRD_LPC1343_REFDESIGN

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL
       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       #define CFG_PRINTF_UART
       // #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB
       #define CFG_PRINTF_UART
       // #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       #define CFG_PRINTF_UART
       // #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_802154USBSTICK
       #define CFG_PRINTF_UART
       // #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\n"
     #endif
 
     #ifdef CFG_BRD_LPC1343_802154USBSTICK

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
        
     #ifdef CFG_BRD_LPC1343_OLIMEX_P
       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif
        
     #ifdef CFG_BRD_LPC1343_OLIMEX_P

+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)

       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif     
       // #define CFG_PRINTF_UART
       #define CFG_PRINTF_USBCDC
       #define CFG_PRINTF_NEWLINE          "\r\n"
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_PRINTF_MAXSTRINGSIZE    (255)
+      // #define CFG_PRINTF_UART
+      #define CFG_PRINTF_USBCDC
+      #define CFG_PRINTF_NEWLINE          "\r\n"
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -712,6 +787,13 @@
                               addition to CFG_INTERFACE_ENABLEIRQ if
                               this is also enabled.  The character used
                               is defined below.
                               addition to CFG_INTERFACE_ENABLEIRQ if
                               this is also enabled.  The character used
                               is defined below.

+    CFG_INTERFACE_LONGSYSINFO If this is set to 1 extra information will
+                              be included in the Sys Info ('V') command
+                              on the CLI. This can be useful when trying
+                              to debug problems on remote HW, or with 
+                              unknown firmware.  It will also use about
+                              0.5KB flash, though, so only enable it is
+                              necessary.

 
     NOTE:                     The command-line interface will use either
                               USB-CDC or UART depending on whether
 
     NOTE:                     The command-line interface will use either
                               USB-CDC or UART depending on whether


@@ -729,6 +811,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL
     #endif
 
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL


@@ -742,6 +825,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB


@@ -759,6 +843,7 @@
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
     #endif
 
     #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART


@@ -776,6 +861,7 @@
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."
       #define CFG_INTERFACE_SHORTERRORS_TOOMANYARGS       ">"
       #define CFG_INTERFACE_SHORTERRORS_TOOFEWARGS        "<"
       #define CFG_INTERFACE_CONFIRMREADY_TEXT             "."

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 
     #ifdef CFG_BRD_LPC1343_802154USBSTICK
     #endif
 
     #ifdef CFG_BRD_LPC1343_802154USBSTICK


@@ -789,6 +875,7 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)

+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
        
     #ifdef CFG_BRD_LPC1343_OLIMEX_P
     #endif
        
     #ifdef CFG_BRD_LPC1343_OLIMEX_P


@@ -802,6 +889,21 @@
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)
       #define CFG_INTERFACE_IRQPIN        (7)
       #define CFG_INTERFACE_SHORTERRORS   (0)
       #define CFG_INTERFACE_CONFIRMREADY  (0)

+      #define CFG_INTERFACE_LONGSYSINFO   (0)
+    #endif
+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      #define CFG_INTERFACE
+      #define CFG_INTERFACE_MAXMSGSIZE    (256)
+      #define CFG_INTERFACE_PROMPT        "LPC-P1343 >> "
+      #define CFG_INTERFACE_SILENTMODE    (0)
+      #define CFG_INTERFACE_DROPCR        (0)
+      #define CFG_INTERFACE_ENABLEIRQ     (0)
+      #define CFG_INTERFACE_IRQPORT       (0)
+      #define CFG_INTERFACE_IRQPIN        (7)
+      #define CFG_INTERFACE_SHORTERRORS   (0)
+      #define CFG_INTERFACE_CONFIRMREADY  (0)
+      #define CFG_INTERFACE_LONGSYSINFO   (0)

     #endif
 /*=========================================================================*/
 
     #endif
 /*=========================================================================*/
 


@@ -878,6 +980,11 @@
       // #define CFG_I2CEEPROM
       #define CFG_I2CEEPROM_SIZE          (3072)
     #endif     
       // #define CFG_I2CEEPROM
       #define CFG_I2CEEPROM_SIZE          (3072)
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_I2CEEPROM
+      #define CFG_I2CEEPROM_SIZE          (3072)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -1017,6 +1124,16 @@
       #define CFG_CHIBI_PROMISCUOUS       (0)
       #define CFG_CHIBI_BUFFERSIZE        (128)
     #endif     
       #define CFG_CHIBI_PROMISCUOUS       (0)
       #define CFG_CHIBI_BUFFERSIZE        (128)
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_CHIBI
+      #define CFG_CHIBI_MODE              (0)                 // OQPSK_868MHZ
+      #define CFG_CHIBI_POWER             (0xE9)              // CHB_PWR_EU2_3DBM
+      #define CFG_CHIBI_CHANNEL           (0)                 // 868-868.6 MHz
+      #define CFG_CHIBI_PANID             (0x1234)
+      #define CFG_CHIBI_PROMISCUOUS       (0)
+      #define CFG_CHIBI_BUFFERSIZE        (128)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -1036,6 +1153,12 @@
                                 support for larger fonts generated with
                                 Dot Factory 
                                 http://www.pavius.net/downloads/tools/53-the-dot-factory
                                 support for larger fonts generated with
                                 Dot Factory 
                                 http://www.pavius.net/downloads/tools/53-the-dot-factory

+    CFG_TFTLCD_USEAAFONTS       If set to a non-zero value, anti-aliased
+                                fonts will be used instead of regular 1-bit
+                                font.  These result in much higher-
+                                quality text, but the fonts are 2 or 4
+                                times larger than plain bitmap fonts and
+                                take a bit more rendering time to display.

     CFG_TFTLCD_TS_DEFAULTTHRESHOLD  Default minimum threshold to trigger a
                                 touch event with the touch screen (and exit
                                 from 'tsWaitForEvent' in touchscreen.c).
     CFG_TFTLCD_TS_DEFAULTTHRESHOLD  Default minimum threshold to trigger a
                                 touch event with the touch screen (and exit
                                 from 'tsWaitForEvent' in touchscreen.c).


@@ -1056,6 +1179,7 @@
     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #ifdef CFG_BRD_LPC1343_REFDESIGN
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif


@@ -1063,6 +1187,7 @@
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #ifdef CFG_BRD_LPC1343_REFDESIGN_MINIMAL
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif


@@ -1070,6 +1195,7 @@
     #if defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB || defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
       #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #if defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB || defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART
       #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif


@@ -1077,6 +1203,7 @@
     #ifdef CFG_BRD_LPC1343_802154USBSTICK
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #ifdef CFG_BRD_LPC1343_802154USBSTICK
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif


@@ -1084,9 +1211,18 @@
     #ifdef CFG_BRD_LPC1343_OLIMEX_P
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
     #ifdef CFG_BRD_LPC1343_OLIMEX_P
       // #define CFG_TFTLCD
       #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)

+      #define CFG_TFTLCD_USEAAFONTS          (0)

       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif     
       #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
       #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
     #endif     

+
+    #ifdef CFG_BRD_LPC1343_LPCXPRESSO
+      // #define CFG_TFTLCD
+      #define CFG_TFTLCD_INCLUDESMALLFONTS   (0)
+      #define CFG_TFTLCD_USEAAFONTS          (0)
+      #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
+      #define CFG_TFTLCD_TS_KEYPADDELAY      (100)
+    #endif

 /*=========================================================================*/
 
 
 /*=========================================================================*/
 
 


@@ -1098,12 +1234,13 @@
                               the 128x64 pixel ST7565 LCD to be included
     CFG_SSD1306               If defined, this will cause drivers for
                               the 128x64 pixel SSD1306 OLED display to be
                               the 128x64 pixel ST7565 LCD to be included
     CFG_SSD1306               If defined, this will cause drivers for
                               the 128x64 pixel SSD1306 OLED display to be

-                              included
+                              included (using bit-banged SPI)

     CFG_SHARPMEM              If defined, this will cause drivers for
                               Sharp Memory Displays to be included
 
     DEPENDENCIES:             ST7565 requires the use of pins 2.1-6.
     DEPENDENCIES:             SSD1306 requires the use of pins 2.1-6.
     CFG_SHARPMEM              If defined, this will cause drivers for
                               Sharp Memory Displays to be included
 
     DEPENDENCIES:             ST7565 requires the use of pins 2.1-6.
     DEPENDENCIES:             SSD1306 requires the use of pins 2.1-6.

+    DEPENDENCIES:             SSD1306_I2C requires the use of pins 2.2.

     DEPENDENCIES:             SHARPMEM requires the use of pins 2.1-4.
     -----------------------------------------------------------------------*/
     // #define CFG_ST7565
     DEPENDENCIES:             SHARPMEM requires the use of pins 2.1-4.
     -----------------------------------------------------------------------*/
     // #define CFG_ST7565


@@ -1149,8 +1286,9 @@
   !defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB && \
   !defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART && \
   !defined CFG_BRD_LPC1343_802154USBSTICK && \
   !defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_USB && \
   !defined CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART && \
   !defined CFG_BRD_LPC1343_802154USBSTICK && \

-  !defined CFG_BRD_LPC1343_OLIMEX_P    
-  #error "You must defined a target board (CFG_BRD_LPC1343_REFDESIGN or CFG_BRD_LPC1343_REFDESIGN_MINIMAL or CFG_BRD_LPC1343_TFTLCDSTANDALONE or CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART or CFG_BRD_LPC1343_802154USBSTICK)"
+  !defined CFG_BRD_LPC1343_OLIMEX_P && \
+  !defined CFG_BRD_LPC1343_LPCXPRESSO
+  #error "You must defined a target board (CFG_BRD_LPC1343_REFDESIGN or CFG_BRD_LPC1343_REFDESIGN_MINIMAL or CFG_BRD_LPC1343_TFTLCDSTANDALONE or CFG_BRD_LPC1343_TFTLCDSTANDALONE_UART or CFG_BRD_LPC1343_802154USBSTICK or CFG_BRD_LPC1343_LPCXPRESSO)"

 #endif
 
 #if defined CFG_PRINTF_USBCDC && defined CFG_PRINTF_UART
 #endif
 
 #if defined CFG_PRINTF_USBCDC && defined CFG_PRINTF_UART