--- /dev/null
+v0.9.2 - Ongoing
+================
+
+- Added lcdDrawPixels() to lcd.h and the current lcd
+ drivers to render rows of raw lcd data much quicker
+ than addressing consecutive pixels individually.
+ Can be used with windowing in future for fast
+ animation, continuously writing raw pixels in a
+ 32x32 pixel frame, etc.
+- Fixed ili9328SetWindow() and ili9325SetWindow().
+ They can now be used for fast screen paints of
+ restricted areas of the screen, such as animations
+ where raw pixel data is constantly fed to the LCD.
+- Fixed pixel overflow bugs in drawCircleFilled(). Any
+ pixels that exceed screen limits will now be dropped,
+ though at the expense of slightly slower code.
+- Added drawLineDotted() to drawing.c to draw lines with
+ a fixed pattern of empty and solid pixels
+- Added __resetBootloader() macro to lpc134x.h to
+ reset and enter the USB bootloader (LPC1343 Reference
+ Design Base Board only since this depends on the
+ existance of the RC combination on the ISP pin).
+ To reset and executre code normally, the watchdog
+ time can be used (see "core/wdt").
+- Added AIRCR register to lpc134x.h (Application Interrupt
+ and Reset Control Register).
+- Added drawIcon16() to drawing.c to render monochrome
+ 16x16 pixel icons from a byte array.
+- Added a handful of common 16x16 icon definitions in
+ /drivers/lcd/icons16.h ... adapted from Gentleface
+ Toolbar Icon Set. For license terms see
+ http://www.gentleface.com/free_icon_set.html
+- Added a few basic RGB565 color schemes to colors.h and
+ an image file showing the colors in /tools/colors_h.png
+- Updated alphanumeric dialogue form to use new buttons.
+- Rewrote drawButton() to use rounded rectangle and
+ all colors are now passed in as parameters. Also
+ modified the button command in the CLI to match this.
+- Rewrote drawProgressBar() to take advantage of the
+ new rounded rectangle function (below). Also
+ modified the progress bar command in the CLI to
+ allow more colors to be indicated when rendering.
+- Added drawRectangleRounded() to drawing.c (filled
+ rectangle with configurable rounded corners).
+- Added drawArrow() to drawing.c to make small rectangles
+ for left/right menu items, etc.
+- Completely rewrote the touch screen calibration code to
+ be much more accurate.
+
+v0.9.0 - 28 March 2011
+======================
+
+- Calibration process no longer starts automatically when
+ calibration data is not found in EEPROM. tsCalibrate()
+ now needs to called manually or from the CLI.
+- Fixed a bug in cmd_tswait.c when no delay was passed.
+- Added CLI command to set touch screen threshold
+ to register a touch event (since this can vary from
+ screen to screen). Type 'x' at the CLI to get/set
+ the value. The setting is persisted to EEPROM, and if
+ no value is found on EEPROM CFG_TFTLCD_TS_DEFAULTTHRESHOLD
+ from projectconfig.h is used.
+- Adjusted touch screen code to check ADC values twice
+ and compare. If mismatch occurs, and error is returned.
+ This provides far more consistent TS values at the
+ expense of having to check the error results. See
+ 'alphanumeric.c' for an example of doing this
+ correctly.
+- Added seperate driver for ILI9328 based displays, even
+ though it seems to be identical to the ILI9325. Files
+ were seperated in case the initialisation needs to be
+ tweeked later or if incompatibilities are found.
+- Added the ability to write the contents of the LCD
+ to a bitmap image, though it's very slow reading data
+ pixel by pixel and converting it to 24-bit RGB values.
+ Performance can definately be improved.
+- Added 'drawRGB565toBGRA32' to drawing.c to convert
+ RGB565 colors back to the canonical BGRA32 format
+- Added gain controls to TSL2561 driver to increase or
+ decrease sensitivity. Should be easy to implement
+ auto-gain functionality now.
+- Changed USB VID to a valid value. Source files and
+ lpc134x-vcom.inf updated accordingly.
+- Moved USB VID and PID to projectconfig.h
+- Added '-mcpu' flag to the linker in Makefile (the wrong
+ libm was being linked because of this).
+
+ WARNING
+ --------------------------------------------------------
+- Some config settings in EEPROM were relocated in v0.90+
+ of the LPC1343 Code Base to take into account the new
+ touch screen calibration code. See projectconfig.h
+ for more details of the new EEPROM layout.
+
+v0.8.6 - 21 March 2011
+======================
+
+- Added DWT section to LPC134x.h (see Cortex-M3
+ Technical Reference Manual section 8.3)
+- Added CPU_RESET_CYCLECOUNTER to cpu.c to do rough
+ in-code performance checks (counts CPU cycles)
+- Added '-lm' to linker in Makefile for math.c support
+- Increased MAX_STRING_SIZE from 100 to 255 in stdio.c
+- Added driver for the TCS3414 RGB color sensor
+- Added driver for the TSL2561 digital light sensor
+- Added CFG_USBCDC_BUFFERSIZE to projectconfig.h
+ instead of cdc_buf.h.
+- Added a PWM example using a piezo buzzer (see
+ 'tools/examples/basics/pwm_piezobuzzer' for details)
+- Added ctype.c to 'core/libc'
+- Changed Crossworks project to use libc files from
+ 'core/libc' and modified the USB CDC printf to be
+ much faster by redirecting inside 'puts' rather than
+ '__putchar' (see 'sysinit.c').
+- Fixed a bug in LPC134x.h ... USB_CMDCODE write and read
+ masks were reversed
+- Added a simple example of reading the card ID from an
+ ISO14443A (Mifare Classic, etc.) card using the PN532
+ ('/tools/examples/sensors/pn532/ISO14443A_ID').
+- Added an 'lcd' folder to 'tools/examples' showing how to use
+ the generic lcd drawing routines, the touch-screen, etc.
+- Rewrote part of the touch screen calibration code to get more
+ accurate results. Each point is now tested twice and the
+ results are averaged. Values beyond a certain limit are also
+ rejected to ignore wacky readings.
+- Added a preliminary PN532 (NFC/RFID) driver. Currently UART
+ only, and only allows simple commands to be sent and received.
+ By default, all data is fed out to the console via printf.
+ Will be elaborated and expanded in future releases.
+- Cleaned up the ILI9325 TFT LCD driver a bit, adding a proper
+ enum for the commands, etc.
+
+
+v0.8.5 - 7 March 2011
+=====================
+
+- Fixed a problem with GDB script when deploying firmware
+ with Segger J-Link in CodeLite. Code will now deploy
+ and start executing properly when F5 is pressed (assuming
+ the Segger GDB Server software is running in the background).
+- Interrupts are now disabled while feeding the watchdog as per
+ a warning in the usermanual.
+- Changed fonts for TTF LCDs. DejaVu Sans 9 is now used by default
+ in the LPC1343 Code Base. The following open source fonts have
+ been converted using The Dot Factory (see '/tools/dotfactory') and
+ can be found in '/drivers/lcd/tft/fonts':
+
+ FONT NAME WIDTH
+ ------------------------------- ----------
+ - Bitstream Vera Mono 9 Fixed (8)
+ - Bitstream Vera Mono 9 Bold Fixed (8)
+ - Bitstream Vera Mono 11 Fixed (9)
+ - Bitstream Vera Mono 11 Bold Fixed (9)
+ - DejaVu Sans 9 Variable
+ - DejaVu Sans 9 Bold Variable
+ - DejaVu Sans Condensed 9 Variable
+ - DejaVu Sans Mono 8 Fixed (8)
+ - DejaVu Sans Mono 8 Bold Fixed (8)
+
+- Modified projectconfig.h to select the target board and configure
+ the project accordingly. This isn't ideal, but it's a lot more
+ maintainable than have a seperate code base for every board since
+ they share 95% of the same code.
+- Modified WDT code to use the WDT oscillator (rather than the
+ external crystal)
+- Fixed a bug when waking up from sleep in Chibi. Removed systick
+ delay when toggling reset and slptr pins since this was causing
+ a blocking condition with the wakeup ISR.
+- Added an example of how to retrieve the MCU's unique
+ 128-bit serial number using IAP (core/iap)
+- Added an option to projectconfig.h to select which pin to use for
+ SCK on SSP0, since the QFN33 package doesn't have all the same
+ pins.
+- Updated Chibi to v0.91 (adds sleep method and promiscuous mode to allow
+ Chibi to act as an 802.15.4 packet sniffer, etc.).
+- Added lcdProperties_t to lcd.h to indicate the properties of different
+ LCDs (to determine if there is a touch screen present, whether the
+ screen orientation can be changed, etc.)
+- Added basic ST7735 LCD driver (128x160 pixel TFT LCD using 6-pin
+ SPI-esque interface). Work in progress (no orientation support, etc.).
+- Added some simple examples in the 'tools/examples' folder.
+
+v0.80 - 27 Jan 2011
+===================
+
+- Added optimised lcdDrawVLine using orientation
+ though this should only be used on lines
+ greate than 20 pixels or so to see any real
+ advantage
+- Added cmd_uart to allow the HW UART speed
+ to be set in EEPROM (between 9600 and
+ 115200). Use the 'U' command.
+- Updated Crossworks projects files to use
+ custom printf in 'core/libc' (gains about
+ 1.3KB in release mode)
+- Added driver for SSD1306 OLED displays
+ to '/drivers/bitmap/ssd1306'
+- Changed commands in the CLI to single
+ characters and shortened descriptions
+ to save flash space (~0.7KB)
+- Updated ILI9325 to allow the screen
+ orientation to be changed to portrait
+ of landscape mode.
+- Added cmd_orientation to change the LCD
+ orientation from the CLI
+- Fixed a bug in the PMU Wakeup interrupt
+ handler
+- Added a circular buffer for outgoing CDC
+ data (cdc_buf.c) since you can only feed one
+ frame per ms (max 64 bytes). The speed needs
+ to be improved finding the right balance
+ between caching data and sending it to the EP,
+ but this should avoid any dropped characters.
+ More testing will be needed to improve this.
+- Fixed a bug with the USB CDC buffer
+- Added SILENTMODE to the CLI to disable the
+ command prompt and echo of input characters
+ (see CFG_INTERFACE_SILENTMODE). Useful
+ when another MCU is use the CLI rather than
+ a human.
+- Added IRQ pin to the CLI to indicate when a
+ command is being processed (pin = low) and
+ when it has completed or a new command can
+ be processed (pin = high).
+- Added 'cmd_tswait' to wait for a touch event
+- Removed 'drivers/nfc/pn532' until proper drivers
+ can be written
+- Added 'cmd_text' and 'cmd_textw' to the CLI to
+ render text on the LCD and get the width in
+ pixels of the specified text before rendering.
+
+v0.70 - 18 Dec 2010
+===================
+
+- Added 'calibrate' and 'gettext' commands to the CLI
+- Added a dialogue box for the TFT LCD/Touchscreen
+ to input alpha-numeric data and return the
+ results as a string ('drivers/lcd/tft/dialogues/*')
+- Added touch screen calibration code and UI
+ ('drivers/lcd/tft/touchscreen.c')
+- Fixed a bug in ILI9325.c to make sure that the LCD
+ is reset during initialisation
+- ** IMPORTANT ** Changed 'core/i2c/*' to fix a number
+ of bugs (thanks Rob65!) ... though this means all
+ i2c peripherals and drivers will need to be tested.
+- Added 'colorscheme_t' to drawing.h to try to use a
+ standard color palette across GUI controls and make
+ it easy to change later. Currently only the button
+ and progress bar make use of this.
+- Added 'lcdBacklightOn()' and 'lcdBacklightOff()' to
+ lcd.h
+- Added 'CFG_TFTLCD_TS_THRESHOLD' to projectconfig.h
+ to configure touch-screen sensitivity when waiting
+ for a touch event
+- Modified 'core/gpio/gpio.c' to reduce the compiled code
+ size. Repetitive switches where only the registers
+ change were modified to use temporary registers and
+ execute the code only once.
+- Added the source and binaries for TheDotFactory to
+ 'tools/dotfactory' for convenience sake. See:
+ http://www.pavius.net/downloads/tools/53-the-dot-factory
+- Removed 'drivers/lcd/tft/tscalibration.c' and moved
+ the relevant code to touchscreen.c
+- Removed the imgconv tool from 'tools/imgconv' (see
+ point below for more information)
+- Removed the previous custom image code and replaced
+ it with 24-bit Windows bitmap files. This is a bit
+ slower (since 24-bit data needs to be converted to
+ RGB565 for each pixel and rows are rendered bottom
+ up making pixel drawing harder to optimise) but
+ converting and eventually saving images is easier.
+ The current code is functional but needs to be
+ heavily optimised.
+- Made some minor optimisations to the data and cmd
+ functions in the ILI9325 driver. Other functions
+ need to be optimised as well, but these two should
+ be close to optimal now. Currently 25 cycles
+ compiled with -Os, 36 cycles with no optimisation.
+- Added 'projects/command/drawing/cmd_bmp.c' to load
+ 24-bit Windows bitmap images from the SD card and
+ display them on the TFT LCD.
+- Added some schematics to '/tools/schematics' to
+ show the assumed pin configurations
+
+v0.60 - 8 December 2010
+=======================
+
+- Added a number of CLI commands for the TFT LCD
+ (see 'project/commands/drawing')
+- Modified FCLK_FAST() in 'drivers/fatfs/mmc.c' to set
+ the max speed to 6.0MHz for improved reliability.
+ Tested with a 4GB microSD card, 300KB/s can be read
+ using a 512 byte read buffer.
+- Modified Chibi to use 16-bit timer 0 for us delays
+ (more accurate)
+- Added a number of commands to
+ '/projects/commands/drawing' for basic TFT LCD
+ operations. Removed 'lcd-test.c' and 'lcd-fill.c'.
+- Added a flag to projectconfig.h to make FATFS read-only
+ (to save a couple KB when space is tight).
+- Moved 'project/eeprom.*' to 'drivers/eeprom' to add a
+ level of abstraction to eeprom access throughout the code
+- Added a table to projectconfig.h to manage eeprom
+ addresses. First 256 byte of eeprom should be reserved
+ for this.
+- Added 'drivers/lcd/tft/colors.h' to keep all common
+ 16-bit RGB565 color definitions in one location
+- Added some sample images to 'tools/imgconv' that can
+ be used to render a basic clock on a TFT LCD screen
+ (using drawImageFromFile in 'drivers/lcd/tft/drawing.c')
+- Modified the makefile to automatically run './lpcrc'
+ post-build
+- Added drawButton() to 'drivers/lcd/tft/drawing.c'
+- Updated 'drivers/lcd/tft/touchscreen.c' to do basic
+ debouncing. tsReadZ() was added to detect pressure on
+ the touch screen, and tsWaitForEvent() will only exit
+ when the pressure passes a minimum threshold. (Thanks
+ to Limor for pointing out some code by Rossum for this.)
+- Fixed some off-by-one pixel errors in cmd-test and
+ elsewhere
+
+v0.51 - 27 November 2010
+========================
+
+- Added simple RSA encryption/decryption driver. Currently limited to
+ using 64-bit and 32-bit numbers in key pairs, which isn't terribly secure,
+ but allows much smaller code size than if huge number support was included.
+- Added a driver for the MCP4725 I2C DAC (see "drivers/dac/mcp4725").
+- Moved 'rom_drivers.h' from 'core/usbhid-rom' to 'core' since it can be used
+ for usbmsd-rom as well if it is implemented at a later date.
+- ili9325ReadData() added to ili9325.c by Adafruit Industries (thanks!)
+- Modified FCLK_FAST() in 'drivers/fatfs/mmc.c' to set fast SPI speed
+ to 18MHz instead of the previous 4MHz. This allows for slightly faster
+ rendering of bitmap images from SD cards, amongst other things.
+- Fixed ILI9325 driver to use 0,0 based pixels and not 1x1, meaning the
+ pixel co-ordinates are 0..239 for X and 0..319 for Y. There may still be
+ some off-by-one pixel issues that need to be further tested.
+
+v0.50 - 26 October 2010
+=======================
+
+- Moved command.c and cmd_tbl.h to /project to try to keep all
+ project-specific files in one location to improve code-sharing and make
+ upgrading easier
+- Created seperate .c files for every command for the command-line interface
+ to make it easier to maintain and share code between projects. All commands
+ listed in cmd_tbl.h are now stored in their own files in /project/commands
+ (ex.: "/project/commands/cmd_hello.c", etc.)
+- Added a CLI command to demonstrate how to draw to the ILI9325 TFT LCD
+- Added a CLI command to show the contents of any directory from the SD card
+ (/project/commmands/cmd_sd_dir.c)
+- Added a CLI command showing how to enter deep-sleep and exit with a SW
+ wakeup (/project/commands/cmd_deepsleep.c). Please note that the wakeup
+ will not work if you are using USB for the CLI. To see the wakeup message,
+ you must use UART for the CLI, which is selected by uncommenting
+ CFG_PRINTF_UART in projectconfig.h
+- Fixed pmu.c to set the core clock back to an appropriate state after wakeup
+- Added simple wrapper for eeprom access (projects/eeprom.c)
+- Reorganised drivers/lcd to take into account non TFT LCD displays.
+- Added a preliminary (experimental) driver for 128x64 pixel ST7565-based
+ bitmap LCDs (ex: Adafruit Industries - http://bit.ly/9xj5vw) ... based on a
+ driver from Limor Fried at Adafruit
+- Numerous bug fixes added by Roel Verdult (Linux compatibility, GCC warnings, etc.)
+- Added stub files for PN532 driver (/drivers/nfc/pn532), and added CFG_PN532 to
+ projectconfig.h as an option
+- Added a simple pwm example using 16-bit timer 1 and p1.9 (MAT0) for the output. PWM can be used
+ to drive stepper motors, or to dim LEDs by adjusting the duty-cycle, etc. The example can be
+ found in "/core/pwm"
+- Added a bi-polar stepper motor driver based on the Arduino library. Basic position data was added
+ to detece deviation from the 'Home' position and to retrieve the spindle's current angle. See
+ "drivers/motor/stepper" for more information.
+- Added test firmware for the UART and USBCDC CLI (tools/testfirmware)
+- Added a table to projectconfig.h to try to keep track of pin and peripherals
+ usage by drivers and the included SW examples.
+- Reorganised some pins used by drivers to avoid pin conflicts.
+- Modified core/timer16/timer16.c to allow PWM output to be stopped after a
+ certain number of pulses have been sent out.
+
+ KNOWN ISSUES
+
+- The SPI code needs to be modified to allow several SPI devices to be safely
+ connected on the same bus. At present, this has not been tested since the
+ SSP/SPI blocks are used exclusively in the current drivers.
+
\ No newline at end of file
--- /dev/null
+Software License Agreement (BSD License)
+
+Unless otherwise noted, Copyright (c) 2010, microBuilder SARL.
+Portions Copyright (c) 2010 Roel Verdult.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+1. Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+3. Neither the name of the copyright holders nor the
+names of its contributors may be used to endorse or promote products
+derived from this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
\ No newline at end of file
--- /dev/null
+##########################################################################
+# User configuration and firmware specific object files
+##########################################################################
+
+# The target, flash and ram of the LPC1xxx microprocessor.
+# Use for the target the value: LPC11xx, LPC13xx or LPC17xx
+TARGET = LPC13xx
+FLASH = 32K
+SRAM = 8K
+
+# For USB HID support the LPC134x reserves 384 bytes from the sram,
+# if you don't want to use the USB features, just use 0 here.
+SRAM_USB = 384
+
+VPATH =
+OBJS = main.o
+
+##########################################################################
+# Project-specific files
+##########################################################################
+
+VPATH += project
+OBJS += commands.o
+
+VPATH += project/commands
+OBJS += cmd_chibi_addr.o cmd_chibi_tx.o cmd_uart.o
+OBJS += cmd_i2ceeprom_read.o cmd_i2ceeprom_write.o cmd_lm75b_gettemp.o
+OBJS += cmd_sysinfo.o cmd_sd_dir.o cmd_tswait.o cmd_orientation.o
+OBJS += cmd_tsthreshhold.o
+
+VPATH += project/commands/drawing
+OBJS += cmd_button.o cmd_circle.o cmd_clear.o cmd_line.o cmd_pixel.o
+OBJS += cmd_progress.o cmd_bmp.o cmd_gettext.o cmd_calibrate.o
+OBJS += cmd_text.o cmd_textw.o cmd_rectangle.o
+
+##########################################################################
+# Optional driver files
+##########################################################################
+
+# Chibi Light-Weight Wireless Stack (AT86RF212)
+VPATH += drivers/chibi
+OBJS += chb.o chb_buf.o chb_drvr.o chb_eeprom.o chb_spi.o
+
+# 4K EEPROM
+VPATH += drivers/eeprom drivers/eeprom/mcp24aa
+OBJS += eeprom.o mcp24aa.o
+
+# LM75B temperature sensor
+VPATH += drivers/sensors/lm75b
+OBJS += lm75b.o
+
+# TFT LCD support
+VPATH += drivers/lcd/tft drivers/lcd/tft/hw drivers/lcd/tft/fonts
+VPATH += drivers/lcd/tft/dialogues
+OBJS += drawing.o touchscreen.o bmp.o alphanumeric.o
+OBJS += dejavusans9.o dejavusansbold9.o dejavusanscondensed9.o
+OBJS += dejavusansmono8.o dejavusansmonobold8.o
+OBJS += veramono9.o veramonobold9.o veramono11.o veramonobold11.o
+# LCD Driver (Only one can be included at a time!)
+OBJS += ILI9328.o
+# OBJS += ILI9325.o
+# OBJS += st7735.o
+# OBJS += st7783.o
+
+# Bitmap/Monochrome LCD support (ST7565, SSD1306, etc.)
+VPATH += drivers/lcd drivers/lcd/bitmap/st7565
+VPATH += drivers/lcd/bitmap/ssd1306
+OBJS += smallfonts.o st7565.o ssd1306.o
+
+# ChaN FatFS and SD card support
+VPATH += drivers/fatfs
+OBJS += ff.o mmc.o
+
+# Motors
+VPATH += drivers/motor/stepper
+OBJS += stepper.o
+
+# RSA Encryption/Descryption
+VPATH += drivers/rsa
+OBJS += rsa.o
+
+# DAC
+VPATH += drivers/dac/mcp4725
+OBJS += mcp4725.o
+
+# RFID/NFC
+VPATH += drivers/sensors/pn532
+OBJS += pn532.o pn532_drvr_uart.o
+
+# TAOS Light Sensors
+VPATH += drivers/sensors/tcs3414 drivers/sensors/tsl2561
+OBJS += tcs3414.o tsl2561.o
+
+##########################################################################
+# Library files
+##########################################################################
+
+VPATH += core core/adc core/cmd core/cpu core/gpio core/i2c core/pmu
+VPATH += core/ssp core/systick core/timer16 core/timer32 core/uart
+VPATH += core/usbhid-rom core/libc core/wdt core/usbcdc core/pwm
+VPATH += core/IAP
+OBJS += adc.o cpu.o cmd.o gpio.o i2c.o pmu.o ssp.o systick.o timer16.o
+OBJS += timer32.o uart.o uart_buf.o usbconfig.o usbhid.o stdio.o string.o
+OBJS += wdt.o cdcuser.o cdc_buf.o usbcore.o usbdesc.o usbhw.o usbuser.o
+OBJS += sysinit.o pwm.o iap.o
+
+##########################################################################
+# GNU GCC compiler prefix and location
+##########################################################################
+
+CROSS_COMPILE = arm-none-eabi-
+AS = $(CROSS_COMPILE)gcc
+CC = $(CROSS_COMPILE)gcc
+LD = $(CROSS_COMPILE)gcc
+SIZE = $(CROSS_COMPILE)size
+OBJCOPY = $(CROSS_COMPILE)objcopy
+OBJDUMP = $(CROSS_COMPILE)objdump
+OUTFILE = firmware
+LPCRC = ./lpcrc
+
+##########################################################################
+# GNU GCC compiler flags
+##########################################################################
+ROOT_PATH = .
+INCLUDE_PATHS = -I$(ROOT_PATH) -I$(ROOT_PATH)/project
+
+##########################################################################
+# Startup files
+##########################################################################
+
+LD_PATH = lpc1xxx
+LD_SCRIPT = $(LD_PATH)/linkscript.ld
+LD_TEMP = $(LD_PATH)/memory.ld
+
+ifeq (LPC11xx,$(TARGET))
+ CORTEX_TYPE=m0
+else
+ CORTEX_TYPE=m3
+endif
+
+CPU_TYPE = cortex-$(CORTEX_TYPE)
+VPATH += lpc1xxx
+OBJS += $(TARGET)_handlers.o LPC1xxx_startup.o
+
+##########################################################################
+# Compiler settings, parameters and flags
+##########################################################################
+
+CFLAGS = -c -g -Os $(INCLUDE_PATHS) -Wall -mthumb -ffunction-sections -fdata-sections -fmessage-length=0 -mcpu=$(CPU_TYPE) -DTARGET=$(TARGET) -fno-builtin
+ASFLAGS = -c -g -Os $(INCLUDE_PATHS) -Wall -mthumb -ffunction-sections -fdata-sections -fmessage-length=0 -mcpu=$(CPU_TYPE) -D__ASSEMBLY__ -x assembler-with-cpp
+LDFLAGS = -nostartfiles -mthumb -mcpu=$(CPU_TYPE) -Wl,--gc-sections
+LDLIBS = -lm
+OCFLAGS = --strip-unneeded
+
+all: firmware
+
+%.o : %.c
+ $(CC) $(CFLAGS) -o $@ $<
+
+%.o : %.s
+ $(AS) $(ASFLAGS) -o $@ $<
+
+firmware: $(OBJS) $(SYS_OBJS)
+ -@echo "MEMORY" > $(LD_TEMP)
+ -@echo "{" >> $(LD_TEMP)
+ -@echo " flash(rx): ORIGIN = 0x00000000, LENGTH = $(FLASH)" >> $(LD_TEMP)
+ -@echo " sram(rwx): ORIGIN = 0x10000000+$(SRAM_USB), LENGTH = $(SRAM)-$(SRAM_USB)" >> $(LD_TEMP)
+ -@echo "}" >> $(LD_TEMP)
+ -@echo "INCLUDE $(LD_SCRIPT)" >> $(LD_TEMP)
+ $(LD) $(LDFLAGS) -T $(LD_TEMP) -o $(OUTFILE).elf $(OBJS) $(LDLIBS)
+ -@echo ""
+ $(SIZE) $(OUTFILE).elf
+ -@echo ""
+ $(OBJCOPY) $(OCFLAGS) -O binary $(OUTFILE).elf $(OUTFILE).bin
+ $(OBJCOPY) $(OCFLAGS) -O ihex $(OUTFILE).elf $(OUTFILE).hex
+ -@echo ""
+ $(LPCRC) firmware.bin
+
+clean:
+ rm -f $(OBJS) $(LD_TEMP) $(OUTFILE).elf $(OUTFILE).bin $(OUTFILE).hex
--- /dev/null
+This software is based on the freely available LPC1343 Reference Design available
+at www.microBuilder.eu, and is licensed under the BSD license (see license.txt
+for details).
+
+The latest version of the software is always available at the following url:
+
+http://www.microbuilder.eu/Projects/LPC1343ReferenceDesign/LPC1343CodeBase.aspx
+
+Online documentation is available at:
+
+http://www.microbuilder.eu/Projects/LPC1343ReferenceDesign/CodeBaseDocumentation.aspx
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<CodeLite_Workspace Name="LPC1343 Workspace" Database="./LPC1343 Workspace.tags">
+ <Project Name="LPC1343_CodeBase" Path="LPC1343_CodeBase.project" Active="Yes"/>
+ <BuildMatrix>
+ <WorkspaceConfiguration Name="Debug" Selected="yes">
+ <Project Name="LPC1343_CodeBase" ConfigName="Debug"/>
+ </WorkspaceConfiguration>
+ <WorkspaceConfiguration Name="Release" Selected="yes">
+ <Project Name="LPC1343_CodeBase" ConfigName="Release"/>
+ </WorkspaceConfiguration>
+ </BuildMatrix>
+</CodeLite_Workspace>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Session Name="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\build\codelite\LPC1343 Workspace.workspace">
+ <int Value="1" Name="m_selectedTab"/>
+ <wxString Value="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\build\codelite\LPC1343 Workspace.workspace" Name="m_workspaceName"/>
+ <TabInfoArray Name="TabInfoArray">
+ <TabInfo>
+ <wxString Value="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\Makefile" Name="FileName"/>
+ <int Value="0" Name="FirstVisibleLine"/>
+ <int Value="22" Name="CurrentLine"/>
+ <wxArrayString Name="Bookmarks"/>
+ </TabInfo>
+ <TabInfo>
+ <wxString Value="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\main.c" Name="FileName"/>
+ <int Value="66" Name="FirstVisibleLine"/>
+ <int Value="45" Name="CurrentLine"/>
+ <wxArrayString Name="Bookmarks"/>
+ </TabInfo>
+ <TabInfo>
+ <wxString Value="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\projectconfig.h" Name="FileName"/>
+ <int Value="18" Name="FirstVisibleLine"/>
+ <int Value="50" Name="CurrentLine"/>
+ <wxArrayString Name="Bookmarks"/>
+ </TabInfo>
+ </TabInfoArray>
+ <SerializedObject Name="m_breakpoints">
+ <long Value="0" Name="Count"/>
+ </SerializedObject>
+</Session>
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<CodeLite_Project Name="LPC1343_CodeBase" InternalType="">
+ <Plugins>
+ <Plugin Name="qmake">
+ <![CDATA[00020001N0005Debug0000000000000001N0007Release000000000000]]>
+ </Plugin>
+ </Plugins>
+ <Description/>
+ <Dependencies/>
+ <VirtualDirectory Name="core">
+ <VirtualDirectory Name="adc">
+ <File Name="../../core/adc/adc.c"/>
+ <File Name="../../core/adc/adc.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="cpu">
+ <File Name="../../core/cpu/cpu.c"/>
+ <File Name="../../core/cpu/cpu.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="gpio">
+ <File Name="../../core/gpio/gpio.c"/>
+ <File Name="../../core/gpio/gpio.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="i2c">
+ <File Name="../../core/i2c/i2c.c"/>
+ <File Name="../../core/i2c/i2c.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="libc">
+ <File Name="../../core/libc/stdio.c"/>
+ <File Name="../../core/libc/string.c"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="pmu">
+ <File Name="../../core/pmu/pmu.c"/>
+ <File Name="../../core/pmu/pmu.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="ssp">
+ <File Name="../../core/ssp/ssp.c"/>
+ <File Name="../../core/ssp/ssp.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="systick">
+ <File Name="../../core/systick/systick.c"/>
+ <File Name="../../core/systick/systick.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="timer16">
+ <File Name="../../core/timer16/timer16.c"/>
+ <File Name="../../core/timer16/timer16.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="timer32">
+ <File Name="../../core/timer32/timer32.c"/>
+ <File Name="../../core/timer32/timer32.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="uart">
+ <File Name="../../core/uart/uart.c"/>
+ <File Name="../../core/uart/uart.h"/>
+ <File Name="../../core/uart/uart_buf.c"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="usbhid-rom">
+ <File Name="../../core/usbhid-rom/rom_drivers.h"/>
+ <File Name="../../core/usbhid-rom/usb.h"/>
+ <File Name="../../core/usbhid-rom/usbconfig.c"/>
+ <File Name="../../core/usbhid-rom/usbconfig.h"/>
+ <File Name="../../core/usbhid-rom/usbhid.c"/>
+ <File Name="../../core/usbhid-rom/usbhid.h"/>
+ <File Name="../../core/usbhid-rom/hidexample.c"/>
+ <File Name="../../core/usbhid-rom/hidexample.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="wdt">
+ <File Name="../../core/wdt/wdt.c"/>
+ <File Name="../../core/wdt/wdt.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="cmd">
+ <File Name="../../core/cmd/cmd.c"/>
+ <File Name="../../core/cmd/cmd.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="usbcdc">
+ <File Name="../../core/usbcdc/cdc.h"/>
+ <File Name="../../core/usbcdc/cdcuser.c"/>
+ <File Name="../../core/usbcdc/cdcuser.h"/>
+ <File Name="../../core/usbcdc/config.h"/>
+ <File Name="../../core/usbcdc/usb.h"/>
+ <File Name="../../core/usbcdc/usbcfg.h"/>
+ <File Name="../../core/usbcdc/usbcore.c"/>
+ <File Name="../../core/usbcdc/usbcore.h"/>
+ <File Name="../../core/usbcdc/usbdesc.c"/>
+ <File Name="../../core/usbcdc/usbdesc.h"/>
+ <File Name="../../core/usbcdc/usbhw.c"/>
+ <File Name="../../core/usbcdc/usbhw.h"/>
+ <File Name="../../core/usbcdc/usbreg.h"/>
+ <File Name="../../core/usbcdc/usbuser.c"/>
+ <File Name="../../core/usbcdc/usbuser.h"/>
+ <File Name="../../core/usbcdc/cdc_buf.c"/>
+ <File Name="../../core/usbcdc/cdc_buf.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="pwm">
+ <File Name="../../core/pwm/pwm.c"/>
+ <File Name="../../core/pwm/pwm.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="iap">
+ <File Name="../../core/iap/iap.c"/>
+ <File Name="../../core/iap/iap.h"/>
+ </VirtualDirectory>
+ </VirtualDirectory>
+ <VirtualDirectory Name="drivers">
+ <VirtualDirectory Name="chibi">
+ <File Name="../../drivers/chibi/chb.c"/>
+ <File Name="../../drivers/chibi/chb.h"/>
+ <File Name="../../drivers/chibi/chb_buf.c"/>
+ <File Name="../../drivers/chibi/chb_buf.h"/>
+ <File Name="../../drivers/chibi/chb_drvr_at86rf212.c"/>
+ <File Name="../../drivers/chibi/chb_drvr_at86rf212.h"/>
+ <File Name="../../drivers/chibi/chb_eeprom.c"/>
+ <File Name="../../drivers/chibi/chb_eeprom.h"/>
+ <File Name="../../drivers/chibi/chb_spi.c"/>
+ <File Name="../../drivers/chibi/chb_spi.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="eeprom">
+ <VirtualDirectory Name="mcp24aa">
+ <File Name="../../drivers/eeprom/mcp24aa/mcp24aa.c"/>
+ <File Name="../../drivers/eeprom/mcp24aa/mcp24aa.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="at25040">
+ <File Name="../../drivers/eeprom/at25040/at25040.c"/>
+ <File Name="../../drivers/eeprom/at25040/at25040.h"/>
+ </VirtualDirectory>
+ <File Name="../../drivers/eeprom/eeprom.c"/>
+ <File Name="../../drivers/eeprom/eeprom.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="sensors">
+ <VirtualDirectory Name="lm75b">
+ <File Name="../../drivers/sensors/lm75b/lm75b.c"/>
+ <File Name="../../drivers/sensors/lm75b/lm75b.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="pn532">
+ <File Name="../../drivers/sensors/pn532/pn532.c"/>
+ <File Name="../../drivers/sensors/pn532/pn532.h"/>
+ <File Name="../../drivers/sensors/pn532/pn532_drvr.h"/>
+ <File Name="../../drivers/sensors/pn532/pn532_drvr_uart.c"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="tcs3414">
+ <File Name="../../drivers/sensors/tcs3414/tcs3414.c"/>
+ <File Name="../../drivers/sensors/tcs3414/tcs3414.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="tsl2561">
+ <File Name="../../drivers/sensors/tsl2561/tsl2561.c"/>
+ <File Name="../../drivers/sensors/tsl2561/tsl2561.h"/>
+ </VirtualDirectory>
+ </VirtualDirectory>
+ <VirtualDirectory Name="fatfs">
+ <File Name="../../drivers/fatfs/ccsbcs.c"/>
+ <File Name="../../drivers/fatfs/diskio.h"/>
+ <File Name="../../drivers/fatfs/ff.c"/>
+ <File Name="../../drivers/fatfs/ff.h"/>
+ <File Name="../../drivers/fatfs/ffconf.h"/>
+ <File Name="../../drivers/fatfs/integer.h"/>
+ <File Name="../../drivers/fatfs/mmc.c"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="lcd">
+ <VirtualDirectory Name="tft">
+ <VirtualDirectory Name="hw">
+ <File Name="../../drivers/lcd/tft/hw/ILI9325.c"/>
+ <File Name="../../drivers/lcd/tft/hw/ILI9325.h"/>
+ <File Name="../../drivers/lcd/tft/hw/st7783.c"/>
+ <File Name="../../drivers/lcd/tft/hw/st7783.h"/>
+ <File Name="../../drivers/lcd/tft/hw/st7735.c"/>
+ <File Name="../../drivers/lcd/tft/hw/st7735.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="fonts">
+ <File Name="../../drivers/lcd/tft/fonts/bitmapfonts.h"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusans9.c"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusans9.h"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusansbold9.c"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusansbold9.h"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusanscondensed9.c"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusanscondensed9.h"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusansmono8.c"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusansmono8.h"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusansmonobold8.c"/>
+ <File Name="../../drivers/lcd/tft/fonts/dejavusansmonobold8.h"/>
+ <File Name="../../drivers/lcd/tft/fonts/veramono9.c"/>
+ <File Name="../../drivers/lcd/tft/fonts/veramono9.h"/>
+ <File Name="../../drivers/lcd/tft/fonts/veramono11.c"/>
+ <File Name="../../drivers/lcd/tft/fonts/veramono11.h"/>
+ <File Name="../../drivers/lcd/tft/fonts/veramonobold9.c"/>
+ <File Name="../../drivers/lcd/tft/fonts/veramonobold9.h"/>
+ <File Name="../../drivers/lcd/tft/fonts/veramonobold11.c"/>
+ <File Name="../../drivers/lcd/tft/fonts/veramonobold11.h"/>
+ </VirtualDirectory>
+ <File Name="../../drivers/lcd/tft/drawing.c"/>
+ <File Name="../../drivers/lcd/tft/drawing.h"/>
+ <File Name="../../drivers/lcd/tft/lcd.h"/>
+ <File Name="../../drivers/lcd/tft/touchscreen.c"/>
+ <File Name="../../drivers/lcd/tft/touchscreen.h"/>
+ <File Name="../../drivers/lcd/tft/colors.h"/>
+ <File Name="../../drivers/lcd/tft/bmp.c"/>
+ <File Name="../../drivers/lcd/tft/bmp.h"/>
+ <VirtualDirectory Name="dialogues">
+ <File Name="../../drivers/lcd/tft/dialogues/alphanumeric.c"/>
+ <File Name="../../drivers/lcd/tft/dialogues/alphanumeric.h"/>
+ </VirtualDirectory>
+ </VirtualDirectory>
+ <VirtualDirectory Name="bitmap">
+ <VirtualDirectory Name="st7565">
+ <File Name="../../drivers/lcd/bitmap/ST7565/ST7565.c"/>
+ <File Name="../../drivers/lcd/bitmap/ST7565/ST7565.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="ssd1306">
+ <File Name="../../drivers/lcd/bitmap/ssd1306/ssd1306.c"/>
+ <File Name="../../drivers/lcd/bitmap/ssd1306/ssd1306.h"/>
+ </VirtualDirectory>
+ </VirtualDirectory>
+ <File Name="../../drivers/lcd/smallfonts.c"/>
+ <File Name="../../drivers/lcd/smallfonts.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="motor">
+ <VirtualDirectory Name="stepper">
+ <File Name="../../drivers/motor/stepper/stepper.c"/>
+ <File Name="../../drivers/motor/stepper/stepper.h"/>
+ </VirtualDirectory>
+ </VirtualDirectory>
+ <VirtualDirectory Name="rsa">
+ <File Name="../../drivers/rsa/rsa.c"/>
+ <File Name="../../drivers/rsa/rsa.h"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="dac">
+ <VirtualDirectory Name="mcp4725">
+ <File Name="../../drivers/dac/mcp4725/mcp4725.c"/>
+ <File Name="../../drivers/dac/mcp4725/mcp4725.h"/>
+ </VirtualDirectory>
+ </VirtualDirectory>
+ </VirtualDirectory>
+ <VirtualDirectory Name="lpc1xxx">
+ <File Name="../../lpc1xxx/linkscript.ld"/>
+ <File Name="../../lpc1xxx/LPC1xxx_startup.c"/>
+ <File Name="../../lpc1xxx/LPC13xx_handlers.c"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="root">
+ <File Name="../../lpc134x.h"/>
+ <File Name="../../main.c"/>
+ <File Name="../../Makefile"/>
+ <File Name="../../projectconfig.h"/>
+ <File Name="../../sysdefs.h"/>
+ <File Name="../../sysinit.c"/>
+ <File Name="../../sysinit.h"/>
+ <File Name="../../ChangeLog.txt"/>
+ </VirtualDirectory>
+ <VirtualDirectory Name="project">
+ <File Name="../../project/cmd_tbl.h"/>
+ <File Name="../../project/commands.c"/>
+ <VirtualDirectory Name="commands">
+ <File Name="../../project/commands/cmd_chibi_addr.c"/>
+ <File Name="../../project/commands/cmd_chibi_tx.c"/>
+ <File Name="../../project/commands/cmd_i2ceeprom_read.c"/>
+ <File Name="../../project/commands/cmd_i2ceeprom_write.c"/>
+ <File Name="../../project/commands/cmd_lm75b_gettemp.c"/>
+ <File Name="../../project/commands/cmd_sd_dir.c"/>
+ <File Name="../../project/commands/cmd_sysinfo.c"/>
+ <VirtualDirectory Name="drawing">
+ <File Name="../../project/commands/drawing/cmd_button.c"/>
+ <File Name="../../project/commands/drawing/cmd_circle.c"/>
+ <File Name="../../project/commands/drawing/cmd_clear.c"/>
+ <File Name="../../project/commands/drawing/cmd_line.c"/>
+ <File Name="../../project/commands/drawing/cmd_pixel.c"/>
+ <File Name="../../project/commands/drawing/cmd_progress.c"/>
+ <File Name="../../project/commands/drawing/cmd_bmp.c"/>
+ <File Name="../../project/commands/drawing/cmd_calibrate.c"/>
+ <File Name="../../project/commands/drawing/cmd_gettext.c"/>
+ <File Name="../../project/commands/drawing/cmd_text.c"/>
+ <File Name="../../project/commands/drawing/cmd_textw.c"/>
+ <File Name="../../project/commands/drawing/cmd_tswait.c"/>
+ <File Name="../../project/commands/drawing/cmd_orientation.c"/>
+ <File Name="../../project/commands/drawing/cmd_rectangle.c"/>
+ <File Name="../../project/commands/drawing/cmd_tsthreshhold.c"/>
+ </VirtualDirectory>
+ <File Name="../../project/commands/cmd_uart.c"/>
+ </VirtualDirectory>
+ </VirtualDirectory>
+ <Settings Type="Dynamic Library">
+ <Configuration Name="Debug" CompilerType="gnu gcc" DebuggerType="GNU gdb debugger" Type="Dynamic Library" BuildCmpWithGlobalSettings="append" BuildLnkWithGlobalSettings="append" BuildResWithGlobalSettings="append">
+ <Compiler Options="-g" Required="yes" PreCompiledHeader="">
+ <IncludePath Value="."/>
+ </Compiler>
+ <Linker Options="" Required="yes"/>
+ <ResourceCompiler Options="" Required="no"/>
+ <General OutputFile="" IntermediateDirectory="./Debug" Command="" CommandArguments="" WorkingDirectory="$(IntermediateDirectory)" PauseExecWhenProcTerminates="yes"/>
+ <Environment EnvVarSetName="<Use Defaults>" DbgSetName="<Use Defaults>"/>
+ <Debugger IsRemote="yes" RemoteHostName="localhost" RemoteHostPort="2331" DebuggerPath="arm-none-eabi-gdb.exe">
+ <PostConnectCommands># Make sure that we are using SWD
+monitor interface SWD
+
+# Set monitor to little endian
+monitor endian little
+
+# Set monitor speed
+monitor speed 1000
+
+# Reset device
+monitor reset
+
+# Set device ID to LPC1343
+monitor flash device = LPC1343
+
+# Enable flash download
+monitor flash download = 1
+
+# Transfer the firmware to the device
+load "../../firmware.elf"
+
+# Initializing PC and stack pointer
+monitor reg r13 = (0x00000000)
+monitor reg pc = (0x00000004)
+</PostConnectCommands>
+ <StartupCommands/>
+ </Debugger>
+ <PreBuild/>
+ <PostBuild/>
+ <CustomBuild Enabled="yes">
+ <RebuildCommand/>
+ <CleanCommand>make clean</CleanCommand>
+ <BuildCommand>make</BuildCommand>
+ <PreprocessFileCommand/>
+ <SingleFileCommand/>
+ <MakefileGenerationCommand/>
+ <ThirdPartyToolName>None</ThirdPartyToolName>
+ <WorkingDirectory>$(WorkspacePath)/../../</WorkingDirectory>
+ </CustomBuild>
+ <AdditionalRules>
+ <CustomPostBuild/>
+ <CustomPreBuild/>
+ </AdditionalRules>
+ </Configuration>
+ <Configuration Name="Release" CompilerType="gnu gcc" DebuggerType="GNU gdb debugger" Type="Dynamic Library" BuildCmpWithGlobalSettings="append" BuildLnkWithGlobalSettings="append" BuildResWithGlobalSettings="append">
+ <Compiler Options="" Required="yes" PreCompiledHeader="">
+ <IncludePath Value="."/>
+ </Compiler>
+ <Linker Options="-O2" Required="yes"/>
+ <ResourceCompiler Options="" Required="no"/>
+ <General OutputFile="" IntermediateDirectory="./Release" Command="" CommandArguments="" WorkingDirectory="$(IntermediateDirectory)" PauseExecWhenProcTerminates="yes"/>
+ <Environment EnvVarSetName="<Use Defaults>" DbgSetName="<Use Defaults>"/>
+ <Debugger IsRemote="no" RemoteHostName="" RemoteHostPort="" DebuggerPath="">
+ <PostConnectCommands/>
+ <StartupCommands/>
+ </Debugger>
+ <PreBuild/>
+ <PostBuild/>
+ <CustomBuild Enabled="yes">
+ <RebuildCommand/>
+ <CleanCommand>make clean</CleanCommand>
+ <BuildCommand>make</BuildCommand>
+ <PreprocessFileCommand/>
+ <SingleFileCommand/>
+ <MakefileGenerationCommand/>
+ <ThirdPartyToolName>None</ThirdPartyToolName>
+ <WorkingDirectory>$(WorkspacePath)</WorkingDirectory>
+ </CustomBuild>
+ <AdditionalRules>
+ <CustomPostBuild/>
+ <CustomPreBuild/>
+ </AdditionalRules>
+ </Configuration>
+ <GlobalSettings>
+ <Compiler Options="">
+ <IncludePath Value="."/>
+ </Compiler>
+ <Linker Options="">
+ <LibraryPath Value="."/>
+ </Linker>
+ <ResourceCompiler Options=""/>
+ </GlobalSettings>
+ </Settings>
+</CodeLite_Project>
--- /dev/null
+rx_data C:\Documents and Settings\Kevin\My Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\main.c /^static chb_rx_data_t rx_data;$/;" variable line:66
+main C:\Documents and Settings\Kevin\My Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\main.c /^int main (void)$/;" function line:70 signature:(void) returns:int
+__putchar C:\Documents and Settings\Kevin\My Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\main.c /^void __putchar(char c) $/;" function line:186 signature:(char c) returns:void
+puts C:\Documents and Settings\Kevin\My Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\main.c /^int puts ( const char * str )$/;" function line:191 signature:( const char * str ) returns:int
--- /dev/null
+<!DOCTYPE CrossStudio_Project_File>
+<solution Name="LPC1343_CodeBase" version="2">
+ <project Name="LPC1343_CodeBase">
+ <configuration Name="Common" Target="LPC1343" arm_architecture="v7M" arm_core_type="Cortex-M3" arm_linker_heap_size="512" arm_linker_process_stack_size="0" arm_linker_stack_size="1024" arm_simulator_memory_simulation_filename="$(TargetsDir)/LPC1000/LPC1000SimulatorMemory.dll" arm_simulator_memory_simulation_parameter="LPC13;0x8000;0x2000;0x0" arm_target_debug_interface_type="ADIv5" arm_target_loader_parameter="12000000" c_preprocessor_definitions="USE_PROCESS_STACK" c_user_include_directories="$(TargetsDir)/LPC1000/include;" link_include_standard_libraries="No" link_include_startup_code="No" linker_additional_files="$(TargetsDir)/LPC1000/lib/liblpc1000$(LibExt)$(LIB);$(TargetsDir)/LPC1000/lib/cmsis$(LibExt)$(LIB)" linker_memory_map_file="$(TargetsDir)/LPC1000/LPC1343_MemoryMap.xml" linker_output_format="bin" oscillator_frequency="12MHz" project_directory="" project_type="Executable" property_groups_file_path="$(TargetsDir)/LPC1000/propertyGroups13xx.xml"/>
+ <configuration Name="Flash" Placement="Flash" arm_target_flash_loader_file_path="$(TargetsDir)/LPC1000/Release/Loader_lpc1300.elf" arm_target_flash_loader_type="LIBMEM RPC Loader" linker_patch_build_command="$(StudioDir)/bin/crossscript "load(\"$(TargetsDir)/LPC1000/LPC1000_LinkPatch.js\");patch(\"$(TargetPath)\");"" linker_section_placement_file="$(StudioDir)/targets/Cortex_M/flash_placement.xml" target_reset_script="FLASHReset()"/>
+ <configuration Name="RAM" Placement="RAM" linker_section_placement_file="$(StudioDir)/targets/Cortex_M/ram_placement.xml" target_reset_script="SRAMReset()"/>
+ <folder Name="Source Files" file_name="">
+ <configuration Name="Common" filter="c;cpp;cxx;cc;h;s;asm;inc"/>
+ <folder Name="core">
+ <folder Name="adc">
+ <file file_name="../../core/adc/adc.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="cpu">
+ <file file_name="../../core/cpu/cpu.c"/>
+ </folder>
+ <folder Name="gpio">
+ <file file_name="../../core/gpio/gpio.c"/>
+ </folder>
+ <folder Name="pmu">
+ <file file_name="../../core/pmu/pmu.c"/>
+ </folder>
+ <folder Name="ssp">
+ <file file_name="../../core/ssp/ssp.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="timer16">
+ <file file_name="../../core/timer16/timer16.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="timer32">
+ <file file_name="../../core/timer32/timer32.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="uart">
+ <file file_name="../../core/uart/uart.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../core/uart/uart_buf.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="usbhid-rom">
+ <file file_name="../../core/usbhid-rom/usbconfig.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../core/usbhid-rom/usbhid.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="wdt">
+ <file file_name="../../core/wdt/wdt.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="systick">
+ <file file_name="../../core/systick/systick.c"/>
+ </folder>
+ <folder Name="i2c">
+ <file file_name="../../core/i2c/i2c.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="iap">
+ <file file_name="../../core/iap/iap.c"/>
+ </folder>
+ <folder Name="cmd">
+ <file file_name="../../core/cmd/cmd.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="usbcdc">
+ <file file_name="../../core/usbcdc/cdcuser.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../core/usbcdc/usbcore.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../core/usbcdc/usbdesc.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../core/usbcdc/usbhw.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../core/usbcdc/usbuser.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../core/usbcdc/cdc_buf.c"/>
+ </folder>
+ <folder Name="pwm">
+ <file file_name="../../core/pwm/pwm.c"/>
+ </folder>
+ <folder Name="libc">
+ <file file_name="../../core/libc/stdio.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../core/libc/string.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../core/libc/ctype.c"/>
+ </folder>
+ </folder>
+ <file file_name="../../lpc134x.h"/>
+ <file file_name="../../projectconfig.h"/>
+ <file file_name="../../sysdefs.h"/>
+ <folder Name="drivers">
+ <folder Name="eeprom">
+ <folder Name="at25040">
+ <file file_name="../../drivers/eeprom/at25040/at25040.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="mcp24aa">
+ <file file_name="../../drivers/eeprom/mcp24aa/mcp24aa.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <file file_name="../../drivers/eeprom/eeprom.c"/>
+ </folder>
+ <folder Name="chibi" file_name="">
+ <file file_name="../../drivers/chibi/chb.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/chibi/chb_buf.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/chibi/chb_drvr.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/chibi/chb_eeprom.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/chibi/chb_spi.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="sensors">
+ <folder Name="lm75b">
+ <file file_name="../../drivers/sensors/lm75b/lm75b.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="analogjoystick">
+ <file file_name="../../drivers/sensors/analogjoystick/analogjoystick.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="pn532">
+ <file file_name="../../drivers/sensors/pn532/pn532.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/sensors/pn532/pn532_drvr_uart.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/sensors/pn532/pn532_drvr_spi.c"/>
+ </folder>
+ <folder Name="tsl2561">
+ <file file_name="../../drivers/sensors/tsl2561/tsl2561.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="tcs3414">
+ <file file_name="../../drivers/sensors/tcs3414/tcs3414.c"/>
+ </folder>
+ </folder>
+ <folder Name="lcd" file_name="">
+ <folder Name="bitmap">
+ <folder Name="st7565">
+ <file file_name="../../drivers/lcd/bitmap/st7565/st7565.c"/>
+ </folder>
+ <folder Name="ssd1306">
+ <file file_name="../../drivers/lcd/bitmap/ssd1306/ssd1306.c"/>
+ </folder>
+ </folder>
+ <folder Name="tft">
+ <folder Name="hw">
+ <file file_name="../../drivers/lcd/tft/hw/ILI9325.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="Yes"/>
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="Yes"/>
+ </file>
+ <file file_name="../../drivers/lcd/tft/hw/st7735.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="Yes"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="Yes"/>
+ </file>
+ <file file_name="../../drivers/lcd/tft/hw/st7783.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="Yes"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="Yes"/>
+ </file>
+ <file file_name="../../drivers/lcd/tft/hw/ILI9328.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ <configuration Name="Release" gcc_optimization_level="Level 1"/>
+ </file>
+ </folder>
+ <folder Name="fonts">
+ <file file_name="../../drivers/lcd/tft/fonts/veramono11.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/lcd/tft/fonts/veramonobold11.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/lcd/tft/fonts/veramono9.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/lcd/tft/fonts/veramonobold9.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/lcd/tft/fonts/dejavusansmono8.c"/>
+ <file file_name="../../drivers/lcd/tft/fonts/dejavusansmonobold8.c"/>
+ <file file_name="../../drivers/lcd/tft/fonts/dejavusanscondensed9.c"/>
+ <file file_name="../../drivers/lcd/tft/fonts/dejavusans9.c"/>
+ <file file_name="../../drivers/lcd/tft/fonts/dejavusansbold9.c"/>
+ </folder>
+ <file file_name="../../drivers/lcd/tft/drawing.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/lcd/tft/touchscreen.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/lcd/tft/bmp.c"/>
+ <folder Name="dialogues">
+ <file file_name="../../drivers/lcd/tft/dialogues/alphanumeric.c"/>
+ </folder>
+ <file file_name="../../drivers/lcd/tft/colors.h"/>
+ <file file_name="../../drivers/lcd/tft/lcd.h"/>
+ </folder>
+ <file file_name="../../drivers/lcd/smallfonts.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/lcd/icons16.h"/>
+ </folder>
+ <folder Name="fatfs" file_name="">
+ <file file_name="../../drivers/fatfs/ff.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../drivers/fatfs/mmc.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="motor">
+ <folder Name="stepper">
+ <file file_name="../../drivers/motor/stepper/stepper.c"/>
+ </folder>
+ </folder>
+ <folder Name="rsa">
+ <file file_name="../../drivers/rsa/rsa.c">
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ </folder>
+ <folder Name="dac">
+ <folder Name="mcp4725">
+ <file file_name="../../drivers/dac/mcp4725/mcp4725.c"/>
+ </folder>
+ </folder>
+ </folder>
+ <file file_name="../../sysinit.c"/>
+ <folder Name="project">
+ <file file_name="../../project/commands.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <folder Name="commands">
+ <file file_name="../../project/commands/cmd_chibi_addr.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/cmd_chibi_tx.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/cmd_i2ceeprom_read.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/cmd_i2ceeprom_write.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/cmd_lm75b_gettemp.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/cmd_sd_dir.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/cmd_sysinfo.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <folder Name="drawing">
+ <file file_name="../../project/commands/drawing/cmd_button.c"/>
+ <file file_name="../../project/commands/drawing/cmd_circle.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/drawing/cmd_line.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/drawing/cmd_pixel.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/drawing/cmd_progress.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ <configuration Name="THUMB Flash Debug" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/drawing/cmd_clear.c"/>
+ <file file_name="../../project/commands/drawing/cmd_bmp.c"/>
+ <file file_name="../../project/commands/drawing/cmd_gettext.c"/>
+ <file file_name="../../project/commands/drawing/cmd_calibrate.c"/>
+ <file file_name="../../project/commands/drawing/cmd_text.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/drawing/cmd_textw.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/drawing/cmd_tswait.c">
+ <configuration Name="THUMB Flash Release" build_exclude_from_build="No"/>
+ </file>
+ <file file_name="../../project/commands/drawing/cmd_orientation.c"/>
+ <file file_name="../../project/commands/drawing/cmd_rectangle.c"/>
+ <file file_name="../../project/commands/drawing/cmd_tsthreshhold.c"/>
+ </folder>
+ <file file_name="../../project/commands/cmd_uart.c"/>
+ </folder>
+ <file file_name="../../project/cmd_tbl.h"/>
+ </folder>
+ <file file_name="../../main.c"/>
+ </folder>
+ <folder Name="System Files">
+ <file file_name="$(TargetsDir)/LPC1000/include/CMSIS/system_LPC13xx.c"/>
+ <file file_name="$(StudioDir)/source/thumb_crt0.s"/>
+ <file file_name="$(TargetsDir)/LPC1000/LPC1300_Startup.s"/>
+ <file file_name="$(TargetsDir)/LPC1000/LPC1300_Target.js">
+ <configuration Name="Common" file_type="Reset Script"/>
+ </file>
+ <file file_name="flash_placement.xml"/>
+ </folder>
+ <configuration Name="Release" arm_fp_abi="Soft" gcc_optimization_level="Optimize For Size" link_IOLibraryName="none"/>
+ <configuration Name="Debug" build_remove_unused_symbols="Yes"/>
+ </project>
+ <configuration Name="THUMB Flash Debug" inherited_configurations="THUMB;Flash;Debug"/>
+ <configuration Name="THUMB" Platform="ARM" arm_instruction_set="THUMB" arm_library_instruction_set="THUMB" c_preprocessor_definitions="__THUMB" hidden="Yes"/>
+ <configuration Name="Flash" c_preprocessor_definitions="__FLASH_BUILD" hidden="Yes"/>
+ <configuration Name="Debug" build_debug_information="Yes" c_preprocessor_definitions="DEBUG" gcc_optimization_level="None" hidden="Yes" link_include_startup_code="No"/>
+ <configuration Name="THUMB Flash Release" gcc_optimization_level="Optimize For Size" inherited_configurations="THUMB;Flash;Release"/>
+ <configuration Name="Release" build_debug_information="No" build_remove_unused_symbols="Yes" c_additional_options="-g1" c_preprocessor_definitions="NDEBUG;STARTUP_FROM_RESET" gcc_optimization_level="Optimize For Size" hidden="Yes" link_include_startup_code="No"/>
+ <configuration Name="Common" c_user_include_directories="$(ProjectDir)/../../;$(ProjectDir)/../../Project/;$(ProjectDir)/../../core/freakusb/usb/;$(ProjectDir)/../../core/freakusb/class/CDC/;$(ProjectDir)/../../core/freakusb/hw/lpc1343/"/>
+</solution>
--- /dev/null
+<!DOCTYPE CrossStudio_for_ARM_Session_File>
+<session>
+ <Bookmarks/>
+ <Breakpoints/>
+ <ExecutionCountWindow/>
+ <Memory1>
+ <MemoryWindow autoEvaluate="0" addressText="&header" numColumns="8" sizeText="sizeof(header)" dataSize="1" radix="16" addressSpace="" />
+ </Memory1>
+ <Memory2>
+ <MemoryWindow autoEvaluate="0" addressText="" numColumns="8" sizeText="" dataSize="1" radix="16" addressSpace="" />
+ </Memory2>
+ <Memory3>
+ <MemoryWindow autoEvaluate="0" addressText="" numColumns="8" sizeText="" dataSize="1" radix="16" addressSpace="" />
+ </Memory3>
+ <Memory4>
+ <MemoryWindow autoEvaluate="0" addressText="" numColumns="8" sizeText="" dataSize="1" radix="16" addressSpace="" />
+ </Memory4>
+ <Project>
+ <ProjectSessionItem path="LPC1343_CodeBase" name="unnamed" />
+ <ProjectSessionItem path="LPC1343_CodeBase;LPC1343_CodeBase" name="unnamed" />
+ <ProjectSessionItem path="LPC1343_CodeBase;LPC1343_CodeBase;Source Files" name="unnamed" />
+ </Project>
+ <Register1>
+ <RegisterWindow openNodes="GPIO2;SSP0/SSP0CR0;SSP0/SSP0CR1;SSP0/SSP0CPSR;SYSCON" binaryNodes="GPIO1/GPIO1DATA;GPIO2/GPIO2DATA;GPIO2/GPIO2DIR;GPIO3/GPIO3DATA" hiddenNodes="" unsignedNodes="" visibleGroups="GPIO2;SSP0;GPIO1;CPU;GPIO3;SCB;SYSCON" decimalNodes="" octalNodes="" asciiNodes="" />
+ </Register1>
+ <Register2>
+ <RegisterWindow openNodes="" binaryNodes="" hiddenNodes="" unsignedNodes="" visibleGroups="" decimalNodes="" octalNodes="" asciiNodes="" />
+ </Register2>
+ <Register3>
+ <RegisterWindow openNodes="" binaryNodes="" hiddenNodes="" unsignedNodes="" visibleGroups="" decimalNodes="" octalNodes="" asciiNodes="" />
+ </Register3>
+ <Register4>
+ <RegisterWindow openNodes="" binaryNodes="" hiddenNodes="" unsignedNodes="" visibleGroups="" decimalNodes="" octalNodes="" asciiNodes="" />
+ </Register4>
+ <TargetWindow programAction="" uploadFileType="" programLoadAddress="" programSize="" uploadFileName="" uploadMemoryInterface="" programFileName="" uploadStartAddress="" programFileType="" uploadSize="" programMemoryInterface="" />
+ <TraceWindow>
+ <Trace enabled="Yes" />
+ </TraceWindow>
+ <Watch1>
+ <Watches active="1" update="Each Second" >
+ <Watchpoint linenumber="66" radix="10" name="msTicks" expression="msTicks" filename="c:/documents and settings/kevin/my documents/my dropbox/microbuilder/code/lpc1343/lpc1343_codebase/core/systick/systick.c" />
+ <Watchpoint linenumber="138" radix="16" name="timer32_0_counter" expression="timer32_0_counter" filename="c:/documents and settings/kevin/my documents/my dropbox/microbuilder/code/lpc1343/lpc1343_codebase/core/timer32/timer32.c" />
+ <Watchpoint linenumber="155" radix="-1" name="xTickCount" expression="xTickCount" filename="c:/documents and settings/kevin/my documents/my dropbox/microbuilder/code/lpc1343/lpc1343_codebase/freertos/tasks.c" />
+ <Watchpoint linenumber="155" radix="16" name="Tick" expression="Tick" filename="c:/documents and settings/kevin/my documents/my dropbox/microbuilder/code/lpc1343/lpc1343_codebase/freertos/tasks.c" />
+ </Watches>
+ </Watch1>
+ <Watch2>
+ <Watches active="0" update="Never" />
+ </Watch2>
+ <Watch3>
+ <Watches active="0" update="Never" />
+ </Watch3>
+ <Watch4>
+ <Watches active="0" update="Never" />
+ </Watch4>
+ <Files>
+ <SessionOpenFile useTextEdit="1" useBinaryEdit="0" codecName="Latin1" x="71" debugPath="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\main.c" y="17" path="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\main.c" left="0" selected="1" name="unnamed" top="0" />
+ <SessionOpenFile useTextEdit="1" useBinaryEdit="0" codecName="Latin1" x="0" debugPath="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\projectconfig.h" y="281" path="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\projectconfig.h" left="0" selected="0" name="unnamed" top="247" />
+ </Files>
+ <ARMCrossStudioWindow activeProject="LPC1343_CodeBase" autoConnectTarget="Segger J-Link" debugSearchFileMap="" fileDialogInitialDirectory="C:\Users\Kevin\Documents\My Dropbox\microBuilder\Code\LPC1343\LPC1343_CodeBase\drivers\lcd" fileDialogDefaultFilter="*.c" autoConnectCapabilities="388991" debugSearchPath="" buildConfiguration="THUMB Flash Release" />
+</session>
--- /dev/null
+<!DOCTYPE Linker_Placement_File>
+<Root name="Flash Section Placement">
+ <MemorySegment name="FLASH" start="0x00000000" size="0x8000">
+ <ProgramSection load="Yes" inputsections="*(.vectors .vectors.*)" name=".vectors"/>
+ <ProgramSection alignment="4" load="Yes" inputsections="*(.init .init.*)" name=".init"/>
+ <ProgramSection alignment="4" load="Yes" inputsections="*(.text .text.* .glue_7t .glue_7 .gnu.linkonce.t.* .gcc_except_table)" name=".text"/>
+ <ProgramSection alignment="4" load="Yes" inputsections="KEEP (*(SORT(.dtors.*))) KEEP (*(.dtors))" name=".dtors"/>
+ <ProgramSection alignment="4" load="Yes" inputsections="KEEP (*(SORT(.ctors.*))) KEEP (*(.ctors))" name=".ctors"/>
+ <ProgramSection alignment="4" load="Yes" inputsections="*(.rodata .rodata.* .gnu.linkonce.r.*)" name=".rodata"/>
+ <ProgramSection alignment="4" load="Yes" runin=".fast_run" inputsections="*(.fast .fast.*)" name=".fast"/>
+ <ProgramSection alignment="4" load="Yes" runin=".data_run" inputsections="*(.data .data.* .gnu.linkonce.d.*)" name=".data"/>
+ </MemorySegment>
+ <MemorySegment name="RAM" start="0x10000180" size="0x2000-0x180">
+ <ProgramSection alignment="4" load="No" name=".fast_run"/>
+ <ProgramSection alignment="4" load="No" name=".data_run"/>
+ <ProgramSection alignment="4" load="No" inputsections="*(.bss .bss.* .gnu.linkonce.b.*) *(COMMON)" name=".bss"/>
+ <ProgramSection alignment="4" load="No" inputsections="*(.non_init .non_init.*)" name=".non_init"/>
+ <ProgramSection alignment="4" size="__HEAPSIZE__" load="No" name=".heap"/>
+ <ProgramSection alignment="4" size="__STACKSIZE__" load="No" name=".stack"/>
+ <ProgramSection alignment="4" size="__STACKSIZE_PROCESS__" load="No" name=".stack_process"/>
+ </MemorySegment>
+ <MemorySegment name="FLASH2">
+ <ProgramSection alignment="4" load="Yes" inputsections="*(.text2 .text2.*)" name=".text2"/>
+ <ProgramSection alignment="4" load="Yes" inputsections="*(.rodata2 .rodata2.*)" name=".rodata2"/>
+ <ProgramSection alignment="4" load="Yes" runin=".data2_run" inputsections="*(.data2 .data2.*)" name=".data2"/>
+ </MemorySegment>
+ <MemorySegment name="RAM2">
+ <ProgramSection alignment="4" load="No" name=".data2_run"/>
+ <ProgramSection alignment="4" load="No" inputsections="*(.bss2 .bss2.*)" name=".bss2"/>
+ </MemorySegment>
+</Root>
--- /dev/null
+/**************************************************************************/
+/*!
+ @file adc.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section Description
+
+ SW-based single-channel A/D conversion. If you wish to convert
+ multiple ADC channels simultaneously, this code will need to be
+ modified to work in BURST mode.
+
+ @section Example
+
+ @code
+ #include "core/cpu/cpu.h"
+ #include "core/adc/adc.h"
+
+ void main (void)
+ {
+ cpuInit();
+ adcInit();
+
+ uint32_t results = 0;
+ while(1)
+ {
+ // Get A/D conversion results from A/D channel 0
+ results = adcRead(0);
+ }
+ }
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ */
+/**************************************************************************/
+
+#include "adc.h"
+
+static bool _adcInitialised = false;
+static uint8_t _adcLastChannel = 0;
+
+/**************************************************************************/
+/*!
+ @brief Returns the conversion results on the specified ADC channel.
+
+ This function will manually start an A/D conversion on a single
+ channel and return the results.
+
+ @param[in] channelNum
+ The A/D channel [0..7] that will be used during the A/D
+ conversion. (Note that only A/D channel's 0..3 are
+ configured by default in adcInit.)
+
+ @return 0 if an overrun error occured, otherwise a 10-bit value
+ containing the A/D conversion results.
+ @warning Only AD channels 0..3 are configured for A/D in adcInit.
+ If you wish to use A/D pins 4..7 they will also need to
+ be added to the adcInit function.
+*/
+/**************************************************************************/
+uint32_t adcRead (uint8_t channelNum)
+{
+ if (!_adcInitialised) adcInit();
+
+ uint32_t regVal, adcData;
+
+ /* make sure that channel number is 0..7 */
+ if ( channelNum >= 8 )
+ {
+ // ToDo: Change this to throw an exception back
+ channelNum = 0;
+ }
+
+ /* Deselect all channels */
+ ADC_AD0CR &= ~ADC_AD0CR_SEL_MASK;
+
+ /* Start converting now on the appropriate channel */
+ ADC_AD0CR |= ADC_AD0CR_START_STARTNOW | (1 << channelNum);
+
+ /* wait until end of A/D convert */
+ while ( 1 )
+ {
+ // Get data register results for the requested channel
+ switch (channelNum)
+ {
+ case 0:
+ regVal = (*(pREG32(ADC_AD0DR0)));
+ break;
+ case 1:
+ regVal = (*(pREG32(ADC_AD0DR1)));
+ break;
+ case 2:
+ regVal = (*(pREG32(ADC_AD0DR2)));
+ break;
+ case 3:
+ regVal = (*(pREG32(ADC_AD0DR3)));
+ break;
+ case 4:
+ regVal = (*(pREG32(ADC_AD0DR4)));
+ break;
+ case 5:
+ regVal = (*(pREG32(ADC_AD0DR5)));
+ break;
+ case 6:
+ regVal = (*(pREG32(ADC_AD0DR6)));
+ break;
+ case 7:
+ regVal = (*(pREG32(ADC_AD0DR7)));
+ break;
+ default:
+ regVal = (*(pREG32(ADC_AD0DR0)));
+ break;
+ }
+
+ /* read result of A/D conversion */
+ if (regVal & ADC_DR_DONE)
+ {
+ break;
+ }
+ }
+
+ /* stop ADC */
+ ADC_AD0CR &= ~ADC_AD0CR_START_MASK;
+
+ /* return 0 if an overrun occurred */
+ if ( regVal & ADC_DR_OVERRUN )
+ {
+ return (0);
+ }
+
+ /* return conversion results */
+ adcData = (regVal >> 6) & 0x3FF;
+ return (adcData);
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the A/D converter and configures channels 0..3
+ for 10-bit, SW-controlled A/D conversion.
+
+ @return Nothing
+*/
+/**************************************************************************/
+void adcInit (void)
+{
+ /* Disable Power down bit to the ADC block. */
+ SCB_PDRUNCFG &= ~(SCB_PDRUNCFG_ADC);
+
+ /* Enable AHB clock to the ADC. */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_ADC);
+
+ /* Digital pins need to have the 'analog' bit set in addition
+ to changing their pin function */
+
+ /* Set AD0 to analog input */
+ IOCON_JTAG_TDI_PIO0_11 &= ~(IOCON_JTAG_TDI_PIO0_11_ADMODE_MASK |
+ IOCON_JTAG_TDI_PIO0_11_FUNC_MASK |
+ IOCON_JTAG_TDI_PIO0_11_MODE_MASK);
+ IOCON_JTAG_TDI_PIO0_11 |= (IOCON_JTAG_TDI_PIO0_11_FUNC_AD0 &
+ IOCON_JTAG_TDI_PIO0_11_ADMODE_ANALOG);
+
+ /* Set AD1 to analog input */
+ IOCON_JTAG_TMS_PIO1_0 &= ~(IOCON_JTAG_TMS_PIO1_0_ADMODE_MASK |
+ IOCON_JTAG_TMS_PIO1_0_FUNC_MASK |
+ IOCON_JTAG_TMS_PIO1_0_MODE_MASK);
+ IOCON_JTAG_TMS_PIO1_0 |= (IOCON_JTAG_TMS_PIO1_0_FUNC_AD1 &
+ IOCON_JTAG_TMS_PIO1_0_ADMODE_ANALOG);
+
+ /* Set AD2 to analog input */
+ IOCON_JTAG_TDO_PIO1_1 &= ~(IOCON_JTAG_TDO_PIO1_1_ADMODE_MASK |
+ IOCON_JTAG_TDO_PIO1_1_FUNC_MASK |
+ IOCON_JTAG_TDO_PIO1_1_MODE_MASK);
+ IOCON_JTAG_TDO_PIO1_1 |= (IOCON_JTAG_TDO_PIO1_1_FUNC_AD2 &
+ IOCON_JTAG_TDO_PIO1_1_ADMODE_ANALOG);
+
+ /* Set AD3 to analog input */
+ IOCON_JTAG_nTRST_PIO1_2 &= ~(IOCON_JTAG_nTRST_PIO1_2_ADMODE_MASK |
+ IOCON_JTAG_nTRST_PIO1_2_FUNC_MASK |
+ IOCON_JTAG_nTRST_PIO1_2_MODE_MASK);
+ IOCON_JTAG_nTRST_PIO1_2 |= (IOCON_JTAG_nTRST_PIO1_2_FUNC_AD3 &
+ IOCON_JTAG_nTRST_PIO1_2_ADMODE_ANALOG);
+
+ /* Note that in SW mode only one channel can be selected at a time (AD0 in this case)
+ To select multiple channels, ADC_AD0CR_BURST_HWSCANMODE must be used */
+ ADC_AD0CR = (ADC_AD0CR_SEL_AD0 | /* SEL=1,select channel 0 on ADC0 */
+ (((CFG_CPU_CCLK / SCB_SYSAHBCLKDIV) / 1000000 - 1 ) << 8) | /* CLKDIV = Fpclk / 1000000 - 1 */
+ ADC_AD0CR_BURST_SWMODE | /* BURST = 0, no BURST, software controlled */
+ ADC_AD0CR_CLKS_10BITS | /* CLKS = 0, 11 clocks/10 bits */
+ ADC_AD0CR_START_NOSTART | /* START = 0 A/D conversion stops */
+ ADC_AD0CR_EDGE_RISING); /* EDGE = 0 (CAP/MAT signal falling, trigger A/D conversion) */
+
+ /* Set initialisation flag */
+ _adcInitialised = true;
+
+ /* Set last channel flag to 0 (initialised above) */
+ _adcLastChannel = 0;
+
+ return;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file adc.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**************************************************************************/
+
+#ifndef _ADC_H_
+#define _ADC_H_
+
+#include "projectconfig.h"
+
+uint32_t adcRead (uint8_t channelNum);
+void adcInit (void);
+
+#endif
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+*******************************************************************/
+
+/**************************************************************************/
+/*!
+ @file cmd.c
+ @author Christopher Wang (Freaklabs)
+ Modified by: K. Townsend (microBuilder.eu)
+ @date 19 May 2010
+
+ Original code taken from the FreakUSB Open Source USB Device Stack
+ http://freaklabs.org/index.php/FreakUSB-Open-Source-USB-Device-Stack.html
+
+ If it works well, you can thank Akiba at Freaklabs. If it fails
+ miserably, you can blame me (since parts of it it were rather
+ ungraciously modified). :-)
+
+*/
+/**************************************************************************/
+
+#include <stdio.h>
+#include <string.h>
+
+#include "cmd.h"
+#include "project/cmd_tbl.h"
+
+#ifdef CFG_PRINTF_UART
+#include "core/uart/uart.h"
+#endif
+
+#ifdef CFG_PRINTF_USBCDC
+ #include "core/usbcdc/cdcuser.h"
+ static char usbcdcBuf [32];
+#endif
+
+#if CFG_INTERFACE_ENABLEIRQ == 1
+ #include "core/gpio/gpio.h"
+#endif
+
+static uint8_t msg[CFG_INTERFACE_MAXMSGSIZE];
+static uint8_t *msg_ptr;
+
+/**************************************************************************/
+/*!
+ @brief Polls the relevant incoming message queue to see if anything
+ is waiting to be processed.
+*/
+/**************************************************************************/
+void cmdPoll()
+{
+ #if defined CFG_PRINTF_UART
+ while (uartRxBufferDataPending())
+ {
+ uint8_t c = uartRxBufferRead();
+ cmdRx(c);
+ }
+ #endif
+
+ #if defined CFG_PRINTF_USBCDC
+ int numBytesToRead, numBytesRead, numAvailByte;
+
+ CDC_OutBufAvailChar (&numAvailByte);
+ if (numAvailByte > 0)
+ {
+ numBytesToRead = numAvailByte > 32 ? 32 : numAvailByte;
+ numBytesRead = CDC_RdOutBuf (&usbcdcBuf[0], &numBytesToRead);
+ int i;
+ for (i = 0; i < numBytesRead; i++)
+ {
+ cmdRx(usbcdcBuf[i]);
+ }
+ }
+ #endif
+}
+
+/**************************************************************************/
+/*!
+ @brief Handles a single incoming character. If a new line is
+ detected, the entire command will be passed to the command
+ parser. If a text character is detected, it will be added to
+ the message buffer until a new line is detected (up to the
+ maximum queue size, CFG_INTERFACE_MAXMSGSIZE).
+
+ @param[in] c
+ The character to parse.
+*/
+/**************************************************************************/
+void cmdRx(uint8_t c)
+{
+ // read out the data in the buffer and echo it back to the host.
+ switch (c)
+ {
+ case '\r':
+ case '\n':
+ // terminate the msg and reset the msg ptr. then send
+ // it to the handler for processing.
+ *msg_ptr = '\0';
+ #if CFG_INTERFACE_SILENTMODE == 0
+ printf("%s", CFG_PRINTF_NEWLINE);
+ #endif
+ cmdParse((char *)msg);
+ msg_ptr = msg;
+ break;
+
+ case '\b':
+ #if CFG_INTERFACE_SILENTMODE == 0
+ printf("%c",c);
+ #endif
+ if (msg_ptr > msg)
+ {
+ msg_ptr--;
+ }
+ break;
+
+ default:
+ #if CFG_INTERFACE_SILENTMODE == 0
+ printf("%c",c);
+ #endif
+ *msg_ptr++ = c;
+ break;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Displays the command prompt. The text that appears is defined
+ in projectconfig.h.
+*/
+/**************************************************************************/
+static void cmdMenu()
+{
+ #if CFG_INTERFACE_SILENTMODE == 0
+ printf(CFG_PRINTF_NEWLINE);
+ printf(CFG_INTERFACE_PROMPT);
+ #endif
+}
+
+/**************************************************************************/
+/*!
+ @brief Parse the command line. This function tokenizes the command
+ input, then searches for the command table entry associated
+ with the commmand. Once found, it will jump to the
+ corresponding function.
+
+ @param[in] cmd
+ The entire command string to be parsed
+*/
+/**************************************************************************/
+void cmdParse(char *cmd)
+{
+ size_t argc, i = 0;
+ char *argv[30];
+
+ argv[i] = strtok(cmd, " ");
+ do
+ {
+ argv[++i] = strtok(NULL, " ");
+ } while ((i < 30) && (argv[i] != NULL));
+
+ argc = i;
+ for (i=0; i < CMD_COUNT; i++)
+ {
+ if (!strcmp(argv[0], cmd_tbl[i].command))
+ {
+ if ((argc == 2) && !strcmp (argv [1], "?"))
+ {
+ // Display parameter help menu on 'command ?'
+ printf ("%s%s%s", cmd_tbl[i].description, CFG_PRINTF_NEWLINE, CFG_PRINTF_NEWLINE);
+ printf ("%s%s", cmd_tbl[i].parameters, CFG_PRINTF_NEWLINE);
+ }
+ else if ((argc - 1) < cmd_tbl[i].minArgs)
+ {
+ // Too few arguments supplied
+ printf ("Too few arguments (%d expected)%s", cmd_tbl[i].minArgs, CFG_PRINTF_NEWLINE);
+ printf ("%sType '%s ?' for more information%s%s", CFG_PRINTF_NEWLINE, cmd_tbl[i].command, CFG_PRINTF_NEWLINE, CFG_PRINTF_NEWLINE);
+ }
+ else if ((argc - 1) > cmd_tbl[i].maxArgs)
+ {
+ // Too many arguments supplied
+ printf ("Too many arguments (%d maximum)%s", cmd_tbl[i].maxArgs, CFG_PRINTF_NEWLINE);
+ printf ("%sType '%s ?' for more information%s%s", CFG_PRINTF_NEWLINE, cmd_tbl[i].command, CFG_PRINTF_NEWLINE, CFG_PRINTF_NEWLINE);
+ }
+ else
+ {
+ #if CFG_INTERFACE_ENABLEIRQ != 0
+ // Set the IRQ pin high at start of a command
+ gpioSetValue(CFG_INTERFACE_IRQPORT, CFG_INTERFACE_IRQPIN, 1);
+ #endif
+ // Dispatch command to the appropriate function
+ cmd_tbl[i].func(argc - 1, &argv [1]);
+ #if CFG_INTERFACE_ENABLEIRQ != 0
+ // Set the IRQ pin low to signal the end of a command
+ gpioSetValue(CFG_INTERFACE_IRQPORT, CFG_INTERFACE_IRQPIN, 0);
+ #endif
+ }
+
+ // Refresh the command prompt
+ cmdMenu();
+ return;
+ }
+ }
+ printf("Command not recognized: '%s'%s%s", cmd, CFG_PRINTF_NEWLINE, CFG_PRINTF_NEWLINE);
+ #if CFG_INTERFACE_SILENTMODE == 0
+ printf("Type '?' for a list of all available commands%s", CFG_PRINTF_NEWLINE);
+ #endif
+
+ cmdMenu();
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the command line using the appropriate interface
+*/
+/**************************************************************************/
+void cmdInit()
+{
+ #if defined CFG_INTERFACE && defined CFG_INTERFACE_UART
+ // Check if UART is already initialised
+ uart_pcb_t *pcb = uartGetPCB();
+ if (!pcb->initialised)
+ {
+ uartInit(CFG_UART_BAUDRATE);
+ }
+ #endif
+
+ #if CFG_INTERFACE_ENABLEIRQ != 0
+ // Set IRQ pin as output
+ gpioSetDir(CFG_INTERFACE_IRQPORT, CFG_INTERFACE_IRQPIN, gpioDirection_Output);
+ gpioSetValue(CFG_INTERFACE_IRQPORT, CFG_INTERFACE_IRQPIN, 1);
+ #endif
+
+ // init the msg ptr
+ msg_ptr = msg;
+
+ // Show the menu
+ cmdMenu();
+
+ // Set the IRQ pin low by default
+ #if CFG_INTERFACE_ENABLEIRQ != 0
+ gpioSetValue(CFG_INTERFACE_IRQPORT, CFG_INTERFACE_IRQPIN, 0);
+ #endif
+}
+
+/**************************************************************************/
+/*!
+ 'help' command handler
+*/
+/**************************************************************************/
+void cmd_help(uint8_t argc, char **argv)
+{
+ size_t i;
+
+ printf("Command Description%s", CFG_PRINTF_NEWLINE);
+ printf("------- -----------%s", CFG_PRINTF_NEWLINE);
+
+ // Display full command list
+ for (i=0; i < CMD_COUNT; i++)
+ {
+ if (!cmd_tbl[i].hidden)
+ {
+ printf ("%-10s %s%s", cmd_tbl[i].command, cmd_tbl[i].description, CFG_PRINTF_NEWLINE);
+ }
+ }
+
+ printf("%sCommand parameters can be seen by entering: <command-name> ?%s", CFG_PRINTF_NEWLINE, CFG_PRINTF_NEWLINE);
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef __CMD_H__
+#define __CMD_H__
+
+#include "projectconfig.h"
+
+typedef struct
+{
+ char *command;
+ uint8_t minArgs;
+ uint8_t maxArgs;
+ uint8_t hidden;
+ void (*func)(uint8_t argc, char **argv);
+ const char *description;
+ const char *parameters;
+} cmd_t;
+
+void cmdPoll();
+void cmdRx(uint8_t c);
+void cmdParse(char *cmd);
+void cmdInit();
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cpu.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Initialises the CPU and any core clocks. By default, the core clock
+ is set to run at 72MHz. In order to reduce power consumption all pins
+ are set to GPIO and input by cpuInit.
+
+ @section EXAMPLE
+ @code
+ #include "lpc134x.h"
+ #include "core/cpu/cpu.h"
+
+ int main (void)
+ {
+ // Initialise the CPU and setup the PLL
+ cpuInit();
+
+ while(1)
+ {
+ }
+ }
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "cpu.h"
+#include "core/gpio/gpio.h"
+
+/**************************************************************************/
+/*!
+ @brief Configures the main clock/PLL
+
+ The speed at which the MCU operates is set here using the SCB_PLLCTRL
+ register, and the SCB_PLLCLKSEL register can be used to select which
+ oscillator to use to generate the system clocks (the internal 12MHz
+ oscillator or an external crystal).
+
+ @param[in] multiplier
+ The PLL multiplier
+
+*/
+/**************************************************************************/
+void cpuPllSetup (cpuMultiplier_t multiplier)
+{
+ uint32_t i;
+
+ // Power up system oscillator
+ SCB_PDRUNCFG &= ~(SCB_PDRUNCFG_SYSOSC_MASK);
+
+ // Setup the crystal input (bypass disabled, 1-20MHz crystal)
+ SCB_SYSOSCCTRL = (SCB_SYSOSCCTRL_BYPASS_DISABLED | SCB_SYSOSCCTRL_FREQRANGE_1TO20MHZ);
+
+ for (i = 0; i < 200; i++)
+ {
+ __asm volatile ("NOP");
+ }
+
+ // Configure PLL
+ SCB_PLLCLKSEL = SCB_CLKSEL_SOURCE_MAINOSC; // Select external crystal as PLL clock source
+ SCB_PLLCLKUEN = SCB_PLLCLKUEN_UPDATE; // Update clock source
+ SCB_PLLCLKUEN = SCB_PLLCLKUEN_DISABLE; // Toggle update register once
+ SCB_PLLCLKUEN = SCB_PLLCLKUEN_UPDATE; // Update clock source again
+
+ // Wait until the clock is updated
+ while (!(SCB_PLLCLKUEN & SCB_PLLCLKUEN_UPDATE));
+
+ // Set clock speed
+ switch (multiplier)
+ {
+ case CPU_MULTIPLIER_2:
+ SCB_PLLCTRL = (SCB_PLLCTRL_MULT_2 | (1 << SCB_PLLCTRL_DIV_BIT));
+ break;
+ case CPU_MULTIPLIER_3:
+ SCB_PLLCTRL = (SCB_PLLCTRL_MULT_3 | (1 << SCB_PLLCTRL_DIV_BIT));
+ break;
+ case CPU_MULTIPLIER_4:
+ SCB_PLLCTRL = (SCB_PLLCTRL_MULT_4 | (1 << SCB_PLLCTRL_DIV_BIT));
+ break;
+ case CPU_MULTIPLIER_5:
+ SCB_PLLCTRL = (SCB_PLLCTRL_MULT_5 | (1 << SCB_PLLCTRL_DIV_BIT));
+ break;
+ case CPU_MULTIPLIER_6:
+ SCB_PLLCTRL = (SCB_PLLCTRL_MULT_6 | (1 << SCB_PLLCTRL_DIV_BIT));
+ break;
+ case CPU_MULTIPLIER_1:
+ default:
+ SCB_PLLCTRL = (SCB_PLLCTRL_MULT_1 | (1 << SCB_PLLCTRL_DIV_BIT));
+ break;
+ }
+
+ // Enable system PLL
+ SCB_PDRUNCFG &= ~(SCB_PDRUNCFG_SYSPLL_MASK);
+
+ // Wait for PLL to lock
+ while (!(SCB_PLLSTAT & SCB_PLLSTAT_LOCK));
+
+ // Setup main clock (use PLL output)
+ SCB_MAINCLKSEL = SCB_MAINCLKSEL_SOURCE_SYSPLLCLKOUT;
+ SCB_MAINCLKUEN = SCB_MAINCLKUEN_UPDATE; // Update clock source
+ SCB_MAINCLKUEN = SCB_MAINCLKUEN_DISABLE; // Toggle update register once
+ SCB_MAINCLKUEN = SCB_MAINCLKUEN_UPDATE;
+
+ // Wait until the clock is updated
+ while (!(SCB_MAINCLKUEN & SCB_MAINCLKUEN_UPDATE));
+
+ // Disable USB clock by default (enabled in USB code)
+ SCB_PDRUNCFG |= (SCB_PDSLEEPCFG_USBPAD_PD); // Power-down USB PHY
+ SCB_PDRUNCFG |= (SCB_PDSLEEPCFG_USBPLL_PD); // Power-down USB PLL
+
+ // Set system AHB clock
+ SCB_SYSAHBCLKDIV = SCB_SYSAHBCLKDIV_DIV1;
+
+ // Enabled IOCON clock for I/O related peripherals
+ SCB_SYSAHBCLKCTRL |= SCB_SYSAHBCLKCTRL_IOCON;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the CPU, setting up the PLL, etc.
+*/
+/**************************************************************************/
+void cpuInit (void)
+{
+ gpioInit();
+
+ // Set all GPIO pins to input by default
+ GPIO_GPIO0DIR &= ~(GPIO_IO_ALL);
+ GPIO_GPIO1DIR &= ~(GPIO_IO_ALL);
+ GPIO_GPIO2DIR &= ~(GPIO_IO_ALL);
+ GPIO_GPIO3DIR &= ~(GPIO_IO_ALL);
+
+ // Setup PLL (etc.)
+ cpuPllSetup(CPU_MULTIPLIER_6);
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cpu.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _CPU_H_
+#define _CPU_H_
+
+#include "projectconfig.h"
+
+// Macro to initialise, reset and enable the cycle counter.
+// This can be used for rough timing and performance tests
+// by resetting the cycle counter before a function, and
+// then reading the value after with "int count = DWT_CYCCNT"
+//
+// CPU_RESET_CYCLECOUNTER;
+// ... do something
+// int count = DWT_CYCCNT;
+//
+#define CPU_RESET_CYCLECOUNTER do { SCB_DEMCR = SCB_DEMCR | 0x01000000; \
+ DWT_CYCCNT = 0; \
+ DWT_CTRL = DWT_CTRL | 1 ; } while(0)
+
+/**************************************************************************/
+/*!
+ @brief Indicates the value for the PLL multiplier
+*/
+/**************************************************************************/
+typedef enum
+{
+ CPU_MULTIPLIER_1 = 0,
+ CPU_MULTIPLIER_2,
+ CPU_MULTIPLIER_3,
+ CPU_MULTIPLIER_4,
+ CPU_MULTIPLIER_5,
+ CPU_MULTIPLIER_6
+}
+cpuMultiplier_t;
+
+void cpuPllSetup (cpuMultiplier_t multiplier);
+void cpuInit (void);
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file gpio.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Controls the general purpose digital IO.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "gpio.h"
+
+#ifdef CFG_CHIBI
+#include "drivers/chibi/chb_drvr.h"
+volatile uint32_t chibi_counter = 0;
+#endif
+
+static bool _gpioInitialised = false;
+
+/**************************************************************************/
+/*!
+ @brief IRQ Handler for GPIO port 0 (currently checks pin 0.1)
+*/
+/**************************************************************************/
+void PIOINT0_IRQHandler(void)
+{
+ uint32_t regVal;
+
+ regVal = gpioIntStatus(0, 1);
+ if (regVal)
+ {
+ gpioIntClear(0, 1);
+ }
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief IRQ Handler for GPIO port 1 (currently checks pin 1.1)
+*/
+/**************************************************************************/
+void PIOINT1_IRQHandler(void)
+{
+ uint32_t regVal;
+
+#ifdef CFG_CHIBI
+ // Check for interrupt on 1.8
+ regVal = gpioIntStatus(1, 8);
+ if (regVal)
+ {
+ chibi_counter++;
+ chb_ISR_Handler();
+ gpioIntClear(1, 8);
+ }
+#else
+ regVal = gpioIntStatus(1, 1);
+ if ( regVal )
+ {
+ gpioIntClear(1, 1);
+ }
+#endif
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief IRQ Handler for GPIO port 2 (currently checks pin 2.1)
+*/
+/**************************************************************************/
+void PIOINT2_IRQHandler(void)
+{
+ uint32_t regVal;
+
+ regVal = gpioIntStatus(2, 1);
+ if ( regVal )
+ {
+ gpioIntClear(2, 1);
+ }
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief IRQ Handler for GPIO port 3 (currently checks pin 3.1)
+*/
+/**************************************************************************/
+void PIOINT3_IRQHandler(void)
+{
+ uint32_t regVal;
+
+ regVal = gpioIntStatus(3, 1);
+ if ( regVal )
+ {
+ gpioIntClear(3, 1);
+ }
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises GPIO and enables the GPIO interrupt
+ handler for all GPIO ports.
+*/
+/**************************************************************************/
+void gpioInit (void)
+{
+ /* Enable AHB clock to the GPIO domain. */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_GPIO);
+
+ /* Set up NVIC when I/O pins are configured as external interrupts. */
+ NVIC_EnableIRQ(EINT0_IRQn);
+ NVIC_EnableIRQ(EINT1_IRQn);
+ NVIC_EnableIRQ(EINT2_IRQn);
+ NVIC_EnableIRQ(EINT3_IRQn);
+
+ /* Set initialisation flag */
+ _gpioInitialised = true;
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the direction (input/output) for a specific port pin
+
+ @param[in] portNum
+ The port number (0..3)
+ @param[in] bitPos
+ The bit position (0..11)
+ @param[in] dir
+ The pin direction (gpioDirection_Input or
+ gpioDirection_Output)
+*/
+/**************************************************************************/
+void gpioSetDir (uint32_t portNum, uint32_t bitPos, gpioDirection_t dir)
+{
+ if (!_gpioInitialised) gpioInit();
+
+ // Get the appropriate register (handled this way to optimise code size)
+ REG32 *gpiodir = &GPIO_GPIO0DIR;
+ switch (portNum)
+ {
+ case 0:
+ gpiodir = &GPIO_GPIO0DIR;
+ break;
+ case 1:
+ gpiodir = &GPIO_GPIO1DIR;
+ break;
+ case 2:
+ gpiodir = &GPIO_GPIO2DIR;
+ break;
+ case 3:
+ gpiodir = &GPIO_GPIO3DIR;
+ break;
+ }
+
+ // Toggle dir
+ dir == gpioDirection_Output ? (*gpiodir |= (1 << bitPos)) : (*gpiodir &= ~(1 << bitPos));
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the value for a specific port pin
+
+ @param[in] portNum
+ The port number (0..3)
+ @param[in] bitPos
+ The bit position (0..31)
+
+ @return The current value for the specified port pin (0..1)
+*/
+/**************************************************************************/
+uint32_t gpioGetValue (uint32_t portNum, uint32_t bitPos)
+{
+ if (!_gpioInitialised) gpioInit();
+
+ uint32_t value = 0;
+
+ switch (portNum)
+ {
+ case 0:
+ value = (GPIO_GPIO0DATA & (1 << bitPos)) ? 1 : 0;
+ break;
+ case 1:
+ value = (GPIO_GPIO1DATA & (1 << bitPos)) ? 1 : 0;
+ break;
+ case 2:
+ value = (GPIO_GPIO2DATA & (1 << bitPos)) ? 1 : 0;
+ break;
+ case 3:
+ value = (GPIO_GPIO3DATA & (1 << bitPos)) ? 1 : 0;
+ break;
+ default:
+ break;
+ }
+
+ return value;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the value for a specific port pin (only relevant when a
+ pin is configured as output).
+
+ @param[in] portNum
+ The port number (0..3)
+ @param[in] bitPos
+ The bit position (0..31)
+ @param[in] bitValue
+ The value to set for the specified bit (0..1). 0 will set
+ the pin low and 1 will set the pin high.
+*/
+/**************************************************************************/
+void gpioSetValue (uint32_t portNum, uint32_t bitPos, uint32_t bitVal)
+{
+ if (!_gpioInitialised) gpioInit();
+
+ // Get the appropriate register (handled this way to optimise code size)
+ REG32 *gpiodata = &GPIO_GPIO0DATA;
+ switch (portNum)
+ {
+ case 0:
+ gpiodata = &GPIO_GPIO0DATA;
+ break;
+ case 1:
+ gpiodata = &GPIO_GPIO1DATA;
+ break;
+ case 2:
+ gpiodata = &GPIO_GPIO2DATA;
+ break;
+ case 3:
+ gpiodata = &GPIO_GPIO3DATA;
+ break;
+ }
+
+ // Toggle value
+ bitVal == 1 ? (*gpiodata |= (1 << bitPos)) : (*gpiodata &= ~(1 << bitPos));
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the interrupt sense, event, etc.
+
+ @param[in] portNum
+ The port number (0..3)
+ @param[in] bitPos
+ The bit position (0..31)
+ @param[in] sense
+ Whether the interrupt should be configured as edge or level
+ sensitive.
+ @param[in] edge
+ Whether one edge or both trigger an interrupt.
+ @param[in] event
+ Whether the rising or the falling edge (high or low)
+ should be used to trigger the interrupt.
+
+ @section Example
+
+ @code
+ // Initialise gpio
+ gpioInit();
+ // Set GPIO1.8 to input
+ gpioSetDir(1, 8, gpioDirection_Input);
+ // Disable the internal pullup/down resistor on P1.8
+ gpioSetPullup (&IOCON_PIO1_8, gpioPullupMode_Inactive);
+ // Setup an interrupt on GPIO1.8
+ gpioSetInterrupt(1, // Port
+ 8, // Pin
+ gpioInterruptSense_Edge, // Edge/Level Sensitive
+ gpioInterruptEdge_Single, // Single/Double Edge
+ gpioInterruptEvent_ActiveHigh); // Rising/Falling
+ // Enable the interrupt
+ gpioIntEnable(1, 8);
+ @endcode
+*/
+/**************************************************************************/
+void gpioSetInterrupt (uint32_t portNum, uint32_t bitPos, gpioInterruptSense_t sense, gpioInterruptEdge_t edge, gpioInterruptEvent_t event)
+{
+ if (!_gpioInitialised) gpioInit();
+
+ // Get the appropriate register (handled this way to optimise code size)
+ REG32 *gpiois = &GPIO_GPIO0IS;
+ REG32 *gpioibe = &GPIO_GPIO0IBE;
+ REG32 *gpioiev = &GPIO_GPIO0IEV;
+ switch (portNum)
+ {
+ case 0:
+ gpiois = &GPIO_GPIO0IS;
+ gpioibe = &GPIO_GPIO0IBE;
+ gpioiev = &GPIO_GPIO0IEV;
+ break;
+ case 1:
+ gpiois = &GPIO_GPIO1IS;
+ gpioibe = &GPIO_GPIO1IBE;
+ gpioiev = &GPIO_GPIO1IEV;
+ break;
+ case 2:
+ gpiois = &GPIO_GPIO2IS;
+ gpioibe = &GPIO_GPIO2IBE;
+ gpioiev = &GPIO_GPIO2IEV;
+ break;
+ case 3:
+ gpiois = &GPIO_GPIO3IS;
+ gpioibe = &GPIO_GPIO3IBE;
+ gpioiev = &GPIO_GPIO3IEV;
+ break;
+ }
+
+ if (gpioInterruptSense_Edge)
+ {
+ *gpiois &= ~(0x1<<bitPos);
+ /* single or double only applies when sense is 0(edge trigger). */
+ gpioInterruptEdge_Single ? (*gpioibe &= ~(0x1<<bitPos)) : (*gpioibe |= (0x1<<bitPos));
+ }
+ else
+ {
+ *gpiois |= (0x1<<bitPos);
+ }
+
+ gpioInterruptEvent_ActiveHigh ? (*gpioiev &= ~(0x1<<bitPos)) : (*gpioiev |= (0x1<<bitPos));
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Enables the interrupt mask for a specific port pin
+
+ @param[in] portNum
+ The port number (0..3)
+ @param[in] bitPos
+ The bit position (0..31)
+*/
+/**************************************************************************/
+void gpioIntEnable (uint32_t portNum, uint32_t bitPos)
+{
+ if (!_gpioInitialised) gpioInit();
+
+ switch (portNum)
+ {
+ case 0:
+ GPIO_GPIO0IE |= (0x1<<bitPos);
+ break;
+ case 1:
+ GPIO_GPIO1IE |= (0x1<<bitPos);
+ break;
+ case 2:
+ GPIO_GPIO2IE |= (0x1<<bitPos);
+ break;
+ case 3:
+ GPIO_GPIO3IE |= (0x1<<bitPos);
+ break;
+ default:
+ break;
+ }
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Disables the interrupt mask for a specific port pin
+
+ @param[in] portNum
+ The port number (0..3)
+ @param[in] bitPos
+ The bit position (0..31)
+*/
+/**************************************************************************/
+void gpioIntDisable (uint32_t portNum, uint32_t bitPos)
+{
+ if (!_gpioInitialised) gpioInit();
+
+ switch (portNum)
+ {
+ case 0:
+ GPIO_GPIO0IE &= ~(0x1<<bitPos);
+ break;
+ case 1:
+ GPIO_GPIO1IE &= ~(0x1<<bitPos);
+ break;
+ case 2:
+ GPIO_GPIO2IE &= ~(0x1<<bitPos);
+ break;
+ case 3:
+ GPIO_GPIO3IE &= ~(0x1<<bitPos);
+ break;
+ default:
+ break;
+ }
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the interrupt status for a specific port pin
+
+ @param[in] portNum
+ The port number (0..3)
+ @param[in] bitPos
+ The bit position (0..31)
+
+ @return The interrupt status for the specified port pin (0..1)
+*/
+/**************************************************************************/
+uint32_t gpioIntStatus (uint32_t portNum, uint32_t bitPos)
+{
+ if (!_gpioInitialised) gpioInit();
+
+ uint32_t regVal = 0;
+
+ switch (portNum)
+ {
+ case 0:
+ if (GPIO_GPIO0MIS & (0x1<<bitPos))
+ {
+ regVal = 1;
+ }
+ break;
+ case 1:
+ if (GPIO_GPIO1MIS & (0x1<<bitPos))
+ {
+ regVal = 1;
+ }
+ break;
+ case 2:
+ if (GPIO_GPIO2MIS & (0x1<<bitPos))
+ {
+ regVal = 1;
+ }
+ break;
+ case 3:
+ if (GPIO_GPIO3MIS & (0x1<<bitPos))
+ {
+ regVal = 1;
+ }
+ break;
+ default:
+ break;
+ }
+ return ( regVal );
+}
+
+/**************************************************************************/
+/*!
+ @brief Clears the interrupt for a port pin
+
+ @param[in] portNum
+ The port number (0..3)
+ @param[in] bitPos
+ The bit position (0..31)
+*/
+/**************************************************************************/
+void gpioIntClear (uint32_t portNum, uint32_t bitPos)
+{
+ if (!_gpioInitialised) gpioInit();
+
+ switch (portNum)
+ {
+ case 0:
+ GPIO_GPIO0IC |= (0x1<<bitPos);
+ break;
+ case 1:
+ GPIO_GPIO1IC |= (0x1<<bitPos);
+ break;
+ case 2:
+ GPIO_GPIO2IC |= (0x1<<bitPos);
+ break;
+ case 3:
+ GPIO_GPIO3IC |= (0x1<<bitPos);
+ break;
+ default:
+ break;
+ }
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Configures the internal pullup/down resistor for GPIO pins
+ (only relevant for pins configured as inputs)
+
+ @param[in] ioconReg
+ A pointer to the IOCON registry value corresponding to
+ the pin you wish to change (for example: &IOCON_PIO2_0
+ for GPIO pin 2.0).
+ @param[in] mode
+ The 'mode' that the pin should be set to, which must be
+ correspond to a value defined in gpioPullupMode_t
+
+ @warning By default, all GPIO pins have the internal pull-up
+ resistor enabled. This may cause unusual behaviour if
+ care isn't taken to set the internal resistor to an
+ appropriate state.
+
+ @section Example
+
+ @code
+ // Initialise gpio
+ gpioInit();
+ // Set GPIO1.8 to input
+ gpioSetDir(1, 8, gpioDirection_Input);
+ // Disable the internal pullup/down resistor on P1.8
+ gpioSetPullup(&IOCON_PIO1_8, gpioPullupMode_Inactive);
+ @endcode
+*/
+/**************************************************************************/
+void gpioSetPullup (volatile uint32_t *ioconReg, gpioPullupMode_t mode)
+{
+ if (!_gpioInitialised) gpioInit();
+
+ // ToDo: Disable interrupts while we are doing this?
+
+ *ioconReg &= ~(IOCON_COMMON_MODE_MASK);
+ *ioconReg |= mode;
+
+ // ToDo: Re-enable interrupts?
+};
--- /dev/null
+/**************************************************************************/
+/*!
+ @file gpio.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _GPIO_H_
+#define _GPIO_H_
+
+#include "projectconfig.h"
+
+/**************************************************************************/
+/*!
+ Indicates whether the interrupt should be configured as edge or
+ level sensitive.
+*/
+/**************************************************************************/
+typedef enum gpioInterruptSense_e
+{
+ gpioInterruptSense_Edge = 0,
+ gpioInterruptSense_Level
+}
+gpioInterruptSense_t;
+
+/**************************************************************************/
+/*!
+ Indicates whether one edge or both edges trigger an interrupt.
+ Setting this to Double will cause both edges to trigger an interrupt.
+*/
+/**************************************************************************/
+typedef enum gpioInterruptEdge_e
+{
+ gpioInterruptEdge_Single = 0,
+ gpioInterruptEdge_Double
+}
+gpioInterruptEdge_t;
+
+/**************************************************************************/
+/*!
+ Indicates whether the interrupt should be triggered in the rising
+ or falling edge. ActiveHigh means that a HIGH level on the pin will
+ trigger an interrupt, ActiveLow means that a LOW level on the pin
+ will trigger an interrupt.
+*/
+/**************************************************************************/
+typedef enum gpioInterruptEvent_e
+{
+ gpioInterruptEvent_ActiveHigh = 0,
+ gpioInterruptEvent_ActiveLow
+}
+gpioInterruptEvent_t;
+
+typedef enum gpioDirection_e
+{
+ gpioDirection_Input = 0,
+ gpioDirection_Output
+}
+gpioDirection_t;
+
+typedef enum gpioPullupMode_e
+{
+ gpioPullupMode_Inactive = IOCON_COMMON_MODE_INACTIVE,
+ gpioPullupMode_PullDown = IOCON_COMMON_MODE_PULLDOWN,
+ gpioPullupMode_PullUp = IOCON_COMMON_MODE_PULLUP,
+ gpioPullupMode_Repeater = IOCON_COMMON_MODE_REPEATER
+}
+gpioPullupMode_t;
+
+void gpioInit (void);
+void gpioSetDir (uint32_t portNum, uint32_t bitPos, gpioDirection_t dir);
+uint32_t gpioGetValue (uint32_t portNum, uint32_t bitPos);
+void gpioSetValue (uint32_t portNum, uint32_t bitPos, uint32_t bitVal);
+void gpioSetInterrupt (uint32_t portNum, uint32_t bitPos, gpioInterruptSense_t sense, gpioInterruptEdge_t edge, gpioInterruptEvent_t event);
+void gpioIntEnable (uint32_t portNum, uint32_t bitPos);
+void gpioIntDisable (uint32_t portNum, uint32_t bitPos);
+uint32_t gpioIntStatus (uint32_t portNum, uint32_t bitPos);
+void gpioIntClear (uint32_t portNum, uint32_t bitPos);
+void gpioSetPullup (volatile uint32_t *ioconRegister, gpioPullupMode_t mode);
+
+#endif
\ No newline at end of file
--- /dev/null
+/*****************************************************************************
+ * i2c.c: I2C C file for NXP LPC11xx/13xx Family Microprocessors
+ *
+ * Copyright(C) 2008, NXP Semiconductor
+ * Parts of this code are (C) 2010, MyVoice CAD/CAM Services
+ * All rights reserved.
+ *
+ * History
+ * 2009.12.07 ver 1.00 Preliminary version, first Release
+ * 2010.07.19 ver 1.10 Rob Jansen - MyVoice CAD/CAM Services:
+ * Major cleaning and a rewrite of some functions
+ * - adding ACK/NACK handling to the state machine
+ * - adding a return result to the I2CEngine()
+ *
+*****************************************************************************/
+#include "i2c.h"
+
+volatile uint32_t I2CMasterState = I2CSTATE_IDLE;
+volatile uint32_t I2CSlaveState = I2CSTATE_IDLE;
+
+volatile uint8_t I2CMasterBuffer[I2C_BUFSIZE];
+volatile uint8_t I2CSlaveBuffer[I2C_BUFSIZE];
+volatile uint32_t I2CReadLength;
+volatile uint32_t I2CWriteLength;
+
+volatile uint32_t RdIndex = 0;
+volatile uint32_t WrIndex = 0;
+
+
+/*****************************************************************************
+** Function name: I2C_IRQHandler
+**
+** Descriptions: I2C interrupt handler, deal with master mode only.
+**
+** parameters: None
+** Returned value: None
+**
+*****************************************************************************/
+void I2C_IRQHandler(void)
+{
+ uint8_t StatValue;
+
+ /* this handler deals with master read and master write only */
+ StatValue = I2C_I2CSTAT;
+ switch ( StatValue )
+ {
+ case 0x08:
+ /*
+ * A START condition has been transmitted.
+ * We now send the slave address and initialize
+ * the write buffer
+ * (we always start with a write after START+SLA)
+ */
+ WrIndex = 0;
+ I2C_I2CDAT = I2CMasterBuffer[WrIndex++];
+ I2C_I2CCONCLR = (I2CONCLR_SIC | I2CONCLR_STAC);
+ I2CMasterState = I2CSTATE_PENDING;
+ break;
+
+ case 0x10:
+ /*
+ * A repeated START condition has been transmitted.
+ * Now a second, read, transaction follows so we
+ * initialize the read buffer.
+ */
+ RdIndex = 0;
+ /* Send SLA with R bit set, */
+ I2C_I2CDAT = I2CMasterBuffer[WrIndex++];
+ I2C_I2CCONCLR = (I2CONCLR_SIC | I2CONCLR_STAC);
+ break;
+
+ case 0x18:
+ /*
+ * SLA+W has been transmitted; ACK has been received.
+ * We now start writing bytes.
+ */
+ I2C_I2CDAT = I2CMasterBuffer[WrIndex++];
+ I2C_I2CCONCLR = I2CONCLR_SIC;
+ break;
+
+ case 0x20:
+ /*
+ * SLA+W has been transmitted; NOT ACK has been received.
+ * Send a stop condition to terminate the transaction
+ * and signal I2CEngine the transaction is aborted.
+ */
+ I2C_I2CCONSET = I2CONSET_STO;
+ I2C_I2CCONCLR = I2CONCLR_SIC;
+ I2CMasterState = I2CSTATE_SLA_NACK;
+ break;
+
+ case 0x28:
+ /*
+ * Data in I2DAT has been transmitted; ACK has been received.
+ * Continue sending more bytes as long as there are bytes to send
+ * and after this check if a read transaction should follow.
+ */
+ if ( WrIndex < I2CWriteLength )
+ {
+ /* Keep writing as long as bytes avail */
+ I2C_I2CDAT = I2CMasterBuffer[WrIndex++];
+ }
+ else
+ {
+ if ( I2CReadLength != 0 )
+ {
+ /* Send a Repeated START to initialize a read transaction */
+ /* (handled in state 0x10) */
+ I2C_I2CCONSET = I2CONSET_STA; /* Set Repeated-start flag */
+ }
+ else
+ {
+ I2CMasterState = I2CSTATE_ACK;
+ I2C_I2CCONSET = I2CONSET_STO; /* Set Stop flag */
+ }
+ }
+ I2C_I2CCONCLR = I2CONCLR_SIC;
+ break;
+
+ case 0x30:
+ /*
+ * Data byte in I2DAT has been transmitted; NOT ACK has been received
+ * Send a STOP condition to terminate the transaction and inform the
+ * I2CEngine that the transaction failed.
+ */
+ I2C_I2CCONSET = I2CONSET_STO;
+ I2C_I2CCONCLR = I2CONCLR_SIC;
+ I2CMasterState = I2CSTATE_NACK;
+ break;
+
+ case 0x38:
+ /*
+ * Arbitration loss in SLA+R/W or Data bytes.
+ * This is a fatal condition, the transaction did not complete due
+ * to external reasons (e.g. hardware system failure).
+ * Inform the I2CEngine of this and cancel the transaction
+ * (this is automatically done by the I2C hardware)
+ */
+ I2CMasterState = I2CSTATE_ARB_LOSS;
+ I2C_I2CCONCLR = I2CONCLR_SIC;
+ break;
+
+ case 0x40:
+ /*
+ * SLA+R has been transmitted; ACK has been received.
+ * Initialize a read.
+ * Since a NOT ACK is sent after reading the last byte,
+ * we need to prepare a NOT ACK in case we only read 1 byte.
+ */
+ if ( I2CReadLength == 1 )
+ {
+ /* last (and only) byte: send a NACK after data is received */
+ I2C_I2CCONCLR = I2CONCLR_AAC;
+ }
+ else
+ {
+ /* more bytes to follow: send an ACK after data is received */
+ I2C_I2CCONSET = I2CONSET_AA;
+ }
+ I2C_I2CCONCLR = I2CONCLR_SIC;
+ break;
+
+ case 0x48:
+ /*
+ * SLA+R has been transmitted; NOT ACK has been received.
+ * Send a stop condition to terminate the transaction
+ * and signal I2CEngine the transaction is aborted.
+ */
+ I2C_I2CCONSET = I2CONSET_STO;
+ I2C_I2CCONCLR = I2CONCLR_SIC;
+ I2CMasterState = I2CSTATE_SLA_NACK;
+ break;
+
+ case 0x50:
+ /*
+ * Data byte has been received; ACK has been returned.
+ * Read the byte and check for more bytes to read.
+ * Send a NOT ACK after the last byte is received
+ */
+ I2CSlaveBuffer[RdIndex++] = I2C_I2CDAT;
+ if ( RdIndex < (I2CReadLength-1) )
+ {
+ /* lmore bytes to follow: send an ACK after data is received */
+ I2C_I2CCONSET = I2CONSET_AA;
+ }
+ else
+ {
+ /* last byte: send a NACK after data is received */
+ I2C_I2CCONCLR = I2CONCLR_AAC;
+ }
+ I2C_I2CCONCLR = I2CONCLR_SIC;
+ break;
+
+ case 0x58:
+ /*
+ * Data byte has been received; NOT ACK has been returned.
+ * This is the last byte to read.
+ * Generate a STOP condition and flag the I2CEngine that the
+ * transaction is finished.
+ */
+ I2CSlaveBuffer[RdIndex++] = I2C_I2CDAT;
+ I2CMasterState = I2CSTATE_ACK;
+ I2C_I2CCONSET = I2CONSET_STO; /* Set Stop flag */
+ I2C_I2CCONCLR = I2CONCLR_SIC; /* Clear SI flag */
+ break;
+
+
+ default:
+ I2C_I2CCONCLR = I2CONCLR_SIC;
+ break;
+ }
+ return;
+}
+
+/*****************************************************************************
+** Function name: I2CStart
+**
+** Descriptions: Create I2C start condition, a timeout
+** value is set if the I2C never gets started,
+** and timed out. It's a fatal error.
+**
+** parameters: None
+** Returned value: true or false, return false if timed out
+**
+*****************************************************************************/
+static uint32_t I2CStart( void )
+{
+ uint32_t timeout = 0;
+
+ /*--- Issue a start condition ---*/
+ I2C_I2CCONSET = I2CONSET_STA; /* Set Start flag */
+
+ while((I2CMasterState != I2CSTATE_PENDING) && (timeout < MAX_TIMEOUT))
+ {
+ timeout++;
+ }
+
+ return (timeout < MAX_TIMEOUT);
+}
+
+/*****************************************************************************
+** Function name: I2CStop
+**
+** Descriptions: Set the I2C stop condition
+**
+** parameters: None
+** Returned value: true or never return
+**
+*****************************************************************************/
+static uint32_t I2CStop( void )
+{
+ uint32_t timeout = 0;
+
+ I2C_I2CCONSET = I2CONSET_STO; /* Set Stop flag */
+ I2C_I2CCONCLR = I2CONCLR_SIC; /* Clear SI flag */
+
+ /*--- Wait for STOP detected ---*/
+ while((I2C_I2CCONSET & I2CONSET_STO) && (timeout < MAX_TIMEOUT))
+ {
+ timeout++;
+ }
+ return (timeout >= MAX_TIMEOUT);
+}
+
+/*****************************************************************************
+** Function name: I2CInit
+**
+** Descriptions: Initialize I2C controller
+**
+** parameters: I2c mode is either MASTER or SLAVE
+** Returned value: true or false, return false if the I2C
+** interrupt handler was not installed correctly
+**
+*****************************************************************************/
+uint32_t i2cInit( uint32_t I2cMode )
+{
+ SCB_PRESETCTRL |= (0x1<<1);
+
+ // Enable I2C clock
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_I2C);
+
+ // Configure pin 0.4 for SCL
+ IOCON_PIO0_4 &= ~(IOCON_PIO0_4_FUNC_MASK | IOCON_PIO0_4_I2CMODE_MASK);
+ IOCON_PIO0_4 |= (IOCON_PIO0_4_FUNC_I2CSCL);
+
+ // Configure pin 0.5 for SDA
+ IOCON_PIO0_5 &= ~(IOCON_PIO0_5_FUNC_MASK | IOCON_PIO0_5_I2CMODE_MASK);
+ IOCON_PIO0_5 |= IOCON_PIO0_5_FUNC_I2CSDA;
+
+ // Clear flags
+ I2C_I2CCONCLR = I2C_I2CCONCLR_AAC |
+ I2C_I2CCONCLR_SIC |
+ I2C_I2CCONCLR_STAC |
+ I2C_I2CCONCLR_I2ENC;
+
+ // See p.128 for appropriate values for SCLL and SCLH
+#if I2C_FAST_MODE_PLUS
+ IOCON_PIO0_4 |= (IOCON_PIO0_4_I2CMODE_FASTPLUSI2C);
+ IOCON_PIO0_5 |= (IOCON_PIO0_5_I2CMODE_FASTPLUSI2C);
+ I2C_I2CSCLL = I2C_SCLL_HS_SCLL;
+ I2C_I2CSCLH = I2C_SCLH_HS_SCLH;
+#else
+ I2C_I2CSCLL = I2SCLL_SCLL;
+ I2C_I2CSCLH = I2SCLH_SCLH;
+#endif
+
+ if ( I2cMode == I2CSLAVE )
+ {
+ I2C_I2CADR0 = SLAVE_ADDR;
+ }
+
+ /* Enable the I2C Interrupt */
+ NVIC_EnableIRQ(I2C_IRQn);
+ I2C_I2CCONSET = I2C_I2CCONSET_I2EN;
+
+ return( TRUE );
+}
+
+/*****************************************************************************
+** Function name: I2CEngine
+**
+** Descriptions: The routine to complete a I2C transaction
+** from start to stop. All the intermitten
+** steps are handled in the interrupt handler.
+** Before this routine is called, the read
+** length, write length and I2C master buffer
+** need to be filled.
+**
+** parameters: None
+** Returned value: Any of the I2CSTATE_... values. See i2c.h
+**
+*****************************************************************************/
+uint32_t i2cEngine( void )
+{
+ I2CMasterState = I2CSTATE_IDLE;
+ RdIndex = 0;
+ WrIndex = 0;
+ if ( I2CStart() != TRUE )
+ {
+ I2CStop();
+ return ( FALSE );
+ }
+
+ /* wait until the state is a terminal state */
+ while (I2CMasterState < 0x100);
+
+ return ( I2CMasterState );
+}
+
+/******************************************************************************
+** End Of File
+******************************************************************************/
+
--- /dev/null
+/*****************************************************************************
+ * i2c.h: Header file for NXP LPC11xx Family Microprocessors
+ *
+ * Copyright(C) 2006, NXP Semiconductor
+ * Parts of this code are (C) 2010, MyVoice CAD/CAM Services
+ * All rights reserved.
+ *
+ * History
+ * 2006.07.19 ver 1.00 Preliminary version, first Release
+ * 2010.07.19 ver 1.10 Rob Jansen - MyVoice CAD/CAM Services
+ * Updated to reflect new code
+ *
+******************************************************************************/
+#ifndef __I2C_H
+#define __I2C_H
+
+#include "projectconfig.h"
+
+/*
+ * These are states returned by the I2CEngine:
+ *
+ * IDLE - is never returned but only used internally
+ * PENDING - is never returned but only used internally in the I2C functions
+ * ACK - The transaction finished and the slave returned ACK (on all bytes)
+ * NACK - The transaction is aborted since the slave returned a NACK
+ * SLA_NACK - The transaction is aborted since the slave returned a NACK on the SLA
+ * this can be intentional (e.g. an 24LC08 EEPROM states it is busy)
+ * or the slave is not available/accessible at all.
+ * ARB_LOSS - Arbitration loss during any part of the transaction.
+ * This could only happen in a multi master system or could also
+ * identify a hardware problem in the system.
+ */
+#define I2CSTATE_IDLE 0x000
+#define I2CSTATE_PENDING 0x001
+#define I2CSTATE_ACK 0x101
+#define I2CSTATE_NACK 0x102
+#define I2CSTATE_SLA_NACK 0x103
+#define I2CSTATE_ARB_LOSS 0x104
+
+#define FAST_MODE_PLUS 0
+
+#define I2C_BUFSIZE 6
+#define MAX_TIMEOUT 0x00FFFFFF
+
+#define I2CMASTER 0x01
+#define I2CSLAVE 0x02
+
+#define SLAVE_ADDR 0xA0
+#define READ_WRITE 0x01
+
+#define RD_BIT 0x01
+
+#define I2CONSET_I2EN 0x00000040 /* I2C Control Set Register */
+#define I2CONSET_AA 0x00000004
+#define I2CONSET_SI 0x00000008
+#define I2CONSET_STO 0x00000010
+#define I2CONSET_STA 0x00000020
+
+#define I2CONCLR_AAC 0x00000004 /* I2C Control clear Register */
+#define I2CONCLR_SIC 0x00000008
+#define I2CONCLR_STAC 0x00000020
+#define I2CONCLR_I2ENC 0x00000040
+
+#define I2DAT_I2C 0x00000000 /* I2C Data Reg */
+#define I2ADR_I2C 0x00000000 /* I2C Slave Address Reg */
+#define I2SCLH_SCLH 120 /* I2C SCL Duty Cycle High Reg */
+#define I2SCLL_SCLL 120 /* I2C SCL Duty Cycle Low Reg */
+#define I2SCLH_HS_SCLH 0x00000020 /* Fast Plus I2C SCL Duty Cycle High Reg */
+#define I2SCLL_HS_SCLL 0x00000020 /* Fast Plus I2C SCL Duty Cycle Low Reg */
+
+
+extern volatile uint8_t I2CMasterBuffer[I2C_BUFSIZE];
+extern volatile uint8_t I2CSlaveBuffer[I2C_BUFSIZE];
+extern volatile uint32_t I2CReadLength, I2CWriteLength;
+
+extern void I2C_IRQHandler( void );
+extern uint32_t i2cInit( uint32_t I2cMode );
+extern uint32_t i2cEngine( void );
+
+#endif /* end __I2C_H */
+/****************************************************************************
+** End Of File
+*****************************************************************************/
--- /dev/null
+/**************************************************************************/
+/*!
+ @file iap.c
+ Source: http://knowledgebase.nxp.com/showthread.php?t=1594
+*/
+/**************************************************************************/
+#include "iap.h"
+
+IAP_return_t iap_return;
+
+#define IAP_ADDRESS 0x1FFF1FF1
+uint32_t param_table[5];
+
+/**************************************************************************/
+/*!
+ Sends the IAP command and stores the result
+*/
+/**************************************************************************/
+void iap_entry(uint32_t param_tab[], uint32_t result_tab[])
+{
+ void (*iap)(uint32_t[], uint32_t[]);
+ iap = (void (*)(uint32_t[], uint32_t[]))IAP_ADDRESS;
+ iap(param_tab,result_tab);
+}
+
+/**************************************************************************/
+/*!
+ Returns the CPU's unique 128-bit serial number (4 words long)
+
+ @section Example
+
+ @code
+ #include "core/iap/iap.h"
+
+ IAP_return_t iap_return;
+ iap_return = iapReadSerialNumber();
+
+ if (iap_return.ReturnCode == 0)
+ {
+ printf("Serial Number: %08X %08X %08X %08X %s",
+ iap_return.Result[0],
+ iap_return.Result[1],
+ iap_return.Result[2],
+ iap_return.Result[3],
+ CFG_PRINTF_NEWLINE);
+ }
+ @endcode
+*/
+/**************************************************************************/
+IAP_return_t iapReadSerialNumber(void)
+{
+ // ToDo: Why does IAP sometime cause the application to halt when read???
+ param_table[0] = IAP_CMD_READUID;
+ iap_entry(param_table,(uint32_t*)(&iap_return));
+ return iap_return;
+}
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file iap.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _IAP_H_
+#define _IAP_H_
+
+#include "projectconfig.h"
+
+#define IAP_CMD_PREPARESECTORFORWRITE (50)
+#define IAP_CMD_COPYRAMTOFLASH (51)
+#define CAP_CMD_ERASESECTORS (52)
+#define IAP_CMD_BLANKCHECKSECTOR (53)
+#define IAP_CMD_READPARTID (54)
+#define IAP_CMD_READBOOTCODEVERSION (55)
+#define IAP_CMD_COMPARE (56)
+#define IAP_CMD_REINVOKEISP (57)
+#define IAP_CMD_READUID (58)
+
+typedef struct
+{
+ unsigned int ReturnCode;
+ unsigned int Result[4];
+} IAP_return_t;
+
+IAP_return_t iapReadSerialNumber(void);
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ * This file is part of the libpayload project.
+ *
+ * Copyright (C) 2008 Uwe Hermann <uwe@hermann-uwe.de>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+int isalpha(int c)
+{
+ return ((c >= 'a' && c <= 'z') || (c >= 'A' && c <= 'Z'));
+}
+
+int isascii(int c)
+{
+ return (c >= 0 && c <= 127);
+}
+
+int isblank(int c)
+{
+ return (c == ' ' || c == '\t');
+}
+
+int iscntrl(int c)
+{
+ return (c <= 31 || c == 127);
+}
+
+int isdigit(int c)
+{
+ return (c >= '0' && c <= '9');
+}
+
+int isalnum(int c)
+{
+ return isalpha(c) || isdigit(c);
+}
+
+int isgraph(int c)
+{
+ return (c >= 33 && c <= 126);
+}
+
+int islower(int c)
+{
+ return (c >= 'a' && c <= 'z');
+}
+
+int isprint(int c)
+{
+ return (c >= 32 && c <= 126);
+}
+
+
+int isspace(int c)
+{
+ return (c == ' ' || (c >= '\t' || c <= '\r'));
+}
+
+int isupper(int c)
+{
+ return (c >= 'A' && c <= 'Z');
+}
+
+int tolower(int c)
+{
+ return (c >= 'A' && c <= 'Z') ? (c + 32) : c;
+}
+
+int toupper(int c)
+{
+ return (c >= 'a' && c <= 'z') ? (c - 32) : c;
+}
+
+int isxdigit(int c)
+{
+ return isdigit(c) || (tolower(c) >= 'a' && tolower(c) <= 'z');
+}
+
+int ispunct(int c)
+{
+ return isprint(c) && !isspace(c) && !isalnum(c);
+}
--- /dev/null
+/*
+ * Software License Agreement (BSD License)
+ *
+ * Based on original stdio.c released by Atmel
+ * Copyright (c) 2008, Atmel Corporation
+ * All rights reserved.
+ *
+ * Modified by Roel Verdult, Copyright (c) 2010
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdint.h>
+
+//------------------------------------------------------------------------------
+// Local Definitions
+//------------------------------------------------------------------------------
+
+// Maximum string size allowed (in bytes).
+#define MAX_STRING_SIZE 255
+
+//------------------------------------------------------------------------------
+// Global Variables
+//------------------------------------------------------------------------------
+
+// Required for proper compilation.
+//struct _reent r = {0, (FILE*) 0, (FILE*) 1, (FILE*) 0};
+//struct _reent *_impure_ptr = &r;
+
+//------------------------------------------------------------------------------
+// Local Functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+// Writes a character inside the given string. Returns 1.
+// \param pStr Storage string.
+// \param c Character to write.
+//------------------------------------------------------------------------------
+signed int append_char(char *pStr, char c)
+{
+ *pStr = c;
+ return 1;
+}
+
+//------------------------------------------------------------------------------
+// Writes a string inside the given string.
+// Returns the size of the written
+// string.
+// \param pStr Storage string.
+// \param pSource Source string.
+//------------------------------------------------------------------------------
+signed int PutString(char *pStr, char fill, signed int width, const char *pSource)
+{
+ signed int num = 0;
+
+ while (*pSource != 0) {
+
+ *pStr++ = *pSource++;
+ num++;
+ }
+
+ width -= num;
+ while (width > 0) {
+
+ *pStr++ = fill;
+ num++;
+ width--;
+ }
+
+ return num;
+}
+
+//------------------------------------------------------------------------------
+// Writes an unsigned int inside the given string, using the provided fill &
+// width parameters.
+// Returns the size in characters of the written integer.
+// \param pStr Storage string.
+// \param fill Fill character.
+// \param width Minimum integer width.
+// \param value Integer value.
+//------------------------------------------------------------------------------
+signed int PutUnsignedInt(
+ char *pStr,
+ char fill,
+ signed int width,
+ unsigned int value)
+{
+ signed int num = 0;
+
+ // Take current digit into account when calculating width
+ width--;
+
+ // Recursively write upper digits
+ if ((value / 10) > 0) {
+
+ num = PutUnsignedInt(pStr, fill, width, value / 10);
+ pStr += num;
+ }
+ // Write filler characters
+ else {
+
+ while (width > 0) {
+
+ append_char(pStr, fill);
+ pStr++;
+ num++;
+ width--;
+ }
+ }
+
+ // Write lower digit
+ num += append_char(pStr, (value % 10) + '0');
+
+ return num;
+}
+
+//------------------------------------------------------------------------------
+// Writes a signed int inside the given string, using the provided fill & width
+// parameters.
+// Returns the size of the written integer.
+// \param pStr Storage string.
+// \param fill Fill character.
+// \param width Minimum integer width.
+// \param value Signed integer value.
+//------------------------------------------------------------------------------
+signed int PutSignedInt(
+ char *pStr,
+ char fill,
+ signed int width,
+ signed int value)
+{
+ signed int num = 0;
+ unsigned int absolute;
+
+ // Compute absolute value
+ if (value < 0) {
+
+ absolute = -value;
+ }
+ else {
+
+ absolute = value;
+ }
+
+ // Take current digit into account when calculating width
+ width--;
+
+ // Recursively write upper digits
+ if ((absolute / 10) > 0) {
+
+ if (value < 0) {
+
+ num = PutSignedInt(pStr, fill, width, -(absolute / 10));
+ }
+ else {
+
+ num = PutSignedInt(pStr, fill, width, absolute / 10);
+ }
+ pStr += num;
+ }
+ else {
+
+ // Reserve space for sign
+ if (value < 0) {
+
+ width--;
+ }
+
+ // Write filler characters
+ while (width > 0) {
+
+ append_char(pStr, fill);
+ pStr++;
+ num++;
+ width--;
+ }
+
+ // Write sign
+ if (value < 0) {
+
+ num += append_char(pStr, '-');
+ pStr++;
+ }
+ }
+
+ // Write lower digit
+ num += append_char(pStr, (absolute % 10) + '0');
+
+ return num;
+}
+
+//------------------------------------------------------------------------------
+// Writes an hexadecimal value into a string, using the given fill, width &
+// capital parameters.
+// Returns the number of char written.
+// \param pStr Storage string.
+// \param fill Fill character.
+// \param width Minimum integer width.
+// \param maj Indicates if the letters must be printed in lower- or upper-case.
+// \param value Hexadecimal value.
+//------------------------------------------------------------------------------
+signed int PutHexa(
+ char *pStr,
+ char fill,
+ signed int width,
+ unsigned char maj,
+ unsigned int value)
+{
+ signed int num = 0;
+
+ // Decrement width
+ width--;
+
+ // Recursively output upper digits
+ if ((value >> 4) > 0) {
+
+ num += PutHexa(pStr, fill, width, maj, value >> 4);
+ pStr += num;
+ }
+ // Write filler chars
+ else {
+
+ while (width > 0) {
+
+ append_char(pStr, fill);
+ pStr++;
+ num++;
+ width--;
+ }
+ }
+
+ // Write current digit
+ if ((value & 0xF) < 10) {
+
+ append_char(pStr, (value & 0xF) + '0');
+ }
+ else if (maj) {
+
+ append_char(pStr, (value & 0xF) - 10 + 'A');
+ }
+ else {
+
+ append_char(pStr, (value & 0xF) - 10 + 'a');
+ }
+ num++;
+
+ return num;
+}
+
+//------------------------------------------------------------------------------
+// Global Functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// Stores the result of a formatted string into another string. Format
+/// arguments are given in a va_list instance.
+/// Return the number of characters written.
+/// \param pStr Destination string.
+/// \param length Length of Destination string.
+/// \param pFormat Format string.
+/// \param ap Argument list.
+//------------------------------------------------------------------------------
+signed int vsnprintf(char *pStr, size_t length, const char *pFormat, va_list ap)
+{
+ char fill;
+ unsigned char width;
+ signed int num = 0;
+ signed int size = 0;
+
+ // Clear the string
+ if (pStr) {
+
+ *pStr = 0;
+ }
+
+ // Phase string
+ while (*pFormat != 0 && size < length) {
+
+ // Normal character
+ if (*pFormat != '%') {
+
+ *pStr++ = *pFormat++;
+ size++;
+ }
+ // Escaped '%'
+ else if (*(pFormat+1) == '%') {
+
+ *pStr++ = '%';
+ pFormat += 2;
+ size++;
+ }
+ // Token delimiter
+ else {
+
+ fill = ' ';
+ width = 0;
+ pFormat++;
+
+ // Parse filler
+ if (*pFormat == '0') {
+
+ fill = '0';
+ pFormat++;
+ }
+
+ // Ignore justifier
+ if (*pFormat == '-') {
+ pFormat++;
+ }
+
+ // Parse width
+ while ((*pFormat >= '0') && (*pFormat <= '9')) {
+
+ width = (width*10) + *pFormat-'0';
+ pFormat++;
+ }
+
+ // Check if there is enough space
+ if (size + width > length) {
+
+ width = length - size;
+ }
+
+ // Parse type
+ switch (*pFormat) {
+ case 'd':
+ case 'i': num = PutSignedInt(pStr, fill, width, va_arg(ap, signed int)); break;
+ case 'u': num = PutUnsignedInt(pStr, fill, width, va_arg(ap, unsigned int)); break;
+ case 'x': num = PutHexa(pStr, fill, width, 0, va_arg(ap, unsigned int)); break;
+ case 'X': num = PutHexa(pStr, fill, width, 1, va_arg(ap, unsigned int)); break;
+ case 's': num = PutString(pStr, fill, width, va_arg(ap, char *)); break;
+ case 'c': num = append_char(pStr, va_arg(ap, unsigned int)); break;
+ default:
+ return EOF;
+ }
+
+ pFormat++;
+ pStr += num;
+ size += num;
+ }
+ }
+
+ // NULL-terminated (final \0 is not counted)
+ if (size < length) {
+
+ *pStr = 0;
+ }
+ else {
+
+ *(--pStr) = 0;
+ size--;
+ }
+
+ return size;
+}
+
+//------------------------------------------------------------------------------
+/// Stores the result of a formatted string into another string. Format
+/// arguments are given in a va_list instance.
+/// Return the number of characters written.
+/// \param pString Destination string.
+/// \param length Length of Destination string.
+/// \param pFormat Format string.
+/// \param ... Other arguments
+//------------------------------------------------------------------------------
+signed int snprintf(char *pString, size_t length, const char *pFormat, ...)
+{
+ va_list ap;
+ signed int rc;
+
+ va_start(ap, pFormat);
+ rc = vsnprintf(pString, length, pFormat, ap);
+ va_end(ap);
+
+ return rc;
+}
+
+//------------------------------------------------------------------------------
+/// Stores the result of a formatted string into another string. Format
+/// arguments are given in a va_list instance.
+/// Return the number of characters written.
+/// \param pString Destination string.
+/// \param pFormat Format string.
+/// \param ap Argument list.
+//------------------------------------------------------------------------------
+signed int vsprintf(char *pString, const char *pFormat, va_list ap)
+{
+ return vsnprintf(pString, MAX_STRING_SIZE, pFormat, ap);
+}
+
+//------------------------------------------------------------------------------
+/// Outputs a formatted string on the DBGU stream. Format arguments are given
+/// in a va_list instance.
+/// \param pFormat Format string
+/// \param ap Argument list.
+//------------------------------------------------------------------------------
+signed int vprintf(const char *pFormat, va_list ap)
+{
+ char pStr[MAX_STRING_SIZE];
+ char pError[] = "stdio.c: increase MAX_STRING_SIZE\r\n";
+
+ // Write formatted string in buffer
+ if (vsprintf(pStr, pFormat, ap) >= MAX_STRING_SIZE) {
+
+ puts(pError);
+ while (1); // Increase MAX_STRING_SIZE
+ }
+
+ // Display string
+ return puts(pStr);
+}
+
+//------------------------------------------------------------------------------
+/// Outputs a formatted string on the DBGU stream, using a variable number of
+/// arguments.
+/// \param pFormat Format string.
+//------------------------------------------------------------------------------
+signed int printf(const char *pFormat, ...)
+{
+ va_list ap;
+ signed int result;
+
+ // Forward call to vprintf
+ va_start(ap, pFormat);
+ result = vprintf(pFormat, ap);
+ va_end(ap);
+
+ return result;
+}
+
+
+//------------------------------------------------------------------------------
+/// Writes a formatted string inside another string.
+/// \param pStr Storage string.
+/// \param pFormat Format string.
+//------------------------------------------------------------------------------
+signed int sprintf(char *pStr, const char *pFormat, ...)
+{
+ va_list ap;
+ signed int result;
+
+ // Forward call to vsprintf
+ va_start(ap, pFormat);
+ result = vsprintf(pStr, pFormat, ap);
+ va_end(ap);
+
+ return result;
+}
\ No newline at end of file
--- /dev/null
+/*
+ * Software License Agreement (BSD License)
+ *
+ * Based on original stdio.c released by Atmel
+ * Copyright (c) 2008, Atmel Corporation
+ * All rights reserved.
+ *
+ * Modified by Roel Verdult, Copyright (c) 2010
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+//------------------------------------------------------------------------------
+// Headers
+//------------------------------------------------------------------------------
+
+#include <string.h>
+
+//------------------------------------------------------------------------------
+// Global Functions
+//------------------------------------------------------------------------------
+
+//------------------------------------------------------------------------------
+/// Copies data from a source buffer into a destination buffer. The two buffers
+/// must NOT overlap. Returns the destination buffer.
+/// \param pDestination Destination buffer.
+/// \param pSource Source buffer.
+/// \param num Number of bytes to copy.
+//------------------------------------------------------------------------------
+void * memcpy(void *pDestination, const void *pSource, size_t num)
+{
+ unsigned char *pByteDestination;
+ unsigned char *pByteSource;
+ unsigned int *pAlignedSource = (unsigned int *) pSource;
+ unsigned int *pAlignedDestination = (unsigned int *) pDestination;
+
+ // If num is more than 4 bytes, and both dest. and source are aligned,
+ // then copy dwords
+ if ((((unsigned int) pAlignedDestination & 0x3) == 0)
+ && (((unsigned int) pAlignedSource & 0x3) == 0)
+ && (num >= 4)) {
+
+ while (num >= 4) {
+
+ *pAlignedDestination++ = *pAlignedSource++;
+ num -= 4;
+ }
+ }
+
+ // Copy remaining bytes
+ pByteDestination = (unsigned char *) pAlignedDestination;
+ pByteSource = (unsigned char *) pAlignedSource;
+ while (num--) {
+
+ *pByteDestination++ = *pByteSource++;
+ }
+
+ return pDestination;
+}
+
+//------------------------------------------------------------------------------
+/// Fills a memory region with the given value. Returns a pointer to the
+/// memory region.
+/// \param pBuffer Pointer to the start of the memory region to fill
+/// \param value Value to fill the region with
+/// \param num Size to fill in bytes
+//------------------------------------------------------------------------------
+void * memset(void *pBuffer, int value, size_t num)
+{
+ unsigned char *pByteDestination;
+ unsigned int *pAlignedDestination = (unsigned int *) pBuffer;
+ unsigned int alignedValue = (value << 24) | (value << 16) | (value << 8) | value;
+
+ // Set words if possible
+ if ((((unsigned int) pAlignedDestination & 0x3) == 0) && (num >= 4)) {
+ while (num >= 4) {
+ *pAlignedDestination++ = alignedValue;
+ num -= 4;
+ }
+ }
+ // Set remaining bytes
+ pByteDestination = (unsigned char *) pAlignedDestination;
+ while (num--) {
+ *pByteDestination++ = value;
+ }
+ return pBuffer;
+}
+
+void* memmove(void *s1, const void *s2, size_t n)
+{
+ char *s=(char*)s2, *d=(char*)s1;
+
+ if(d > s){
+ s+=n-1;
+ d+=n-1;
+ while(n){
+ *d--=*s--;
+ n--;
+ }
+ }else if(d < s)
+ while(n){
+ *d++=*s++;
+ n--;
+ }
+ return s1;
+}
+
+int memcmp(const void *av, const void *bv, size_t len)
+{
+ const unsigned char *a = av;
+ const unsigned char *b = bv;
+ size_t i;
+
+ for (i=0; i<len; i++)
+ {
+ if (a[i] != b[i])
+ {
+ return (int)(a[i] - b[i]);
+ }
+ }
+ return 0;
+}
+
+
+
+//-----------------------------------------------------------------------------
+/// Search a character in the given string.
+/// Returns a pointer to the character location.
+/// \param pString Pointer to the start of the string to search.
+/// \param character The character to find.
+//-----------------------------------------------------------------------------
+char * strchr(const char *pString, int character)
+{
+ char * p = (char *)pString;
+ char c = character & 0xFF;
+
+ while(*p != c) {
+ if (*p == 0) {
+ return 0;
+ }
+ p++;
+ }
+ return p;
+}
+
+//-----------------------------------------------------------------------------
+/// Return the length of a given string
+/// \param pString Pointer to the start of the string.
+//-----------------------------------------------------------------------------
+size_t strlen(const char *pString)
+{
+ unsigned int length = 0;
+
+ while(*pString++ != 0) {
+ length++;
+ }
+ return length;
+}
+
+
+//-----------------------------------------------------------------------------
+/// Search a character backword from the end of given string.
+/// Returns a pointer to the character location.
+/// \param pString Pointer to the start of the string to search.
+/// \param character The character to find.
+//-----------------------------------------------------------------------------
+char * strrchr(const char *pString, int character)
+{
+ char *p = 0;
+
+ while(*pString != 0) {
+ if (*pString++ == character) {
+ p = (char*)pString;
+ }
+ }
+ return p;
+}
+
+//-----------------------------------------------------------------------------
+/// Copy from source string to destination string
+/// Return a pointer to the destination string
+/// \param pDestination Pointer to the destination string.
+/// \param pSource Pointer to the source string.
+//-----------------------------------------------------------------------------
+char * strcpy(char *pDestination, const char *pSource)
+{
+ char *pSaveDest = pDestination;
+
+ for(; (*pDestination = *pSource) != 0; ++pSource, ++pDestination);
+ return pSaveDest;
+}
+
+//-----------------------------------------------------------------------------
+/// Compare the first specified bytes of 2 given strings
+/// Return 0 if equals
+/// Return >0 if 1st string > 2nd string
+/// Return <0 if 1st string < 2nd string
+/// \param pString1 Pointer to the start of the 1st string.
+/// \param pString2 Pointer to the start of the 2nd string.
+/// \param count Number of bytes that should be compared.
+//-----------------------------------------------------------------------------
+int strncmp(const char *pString1, const char *pString2, size_t count)
+{
+ int r;
+
+ while(count) {
+ r = *pString1 - *pString2;
+ if (r == 0) {
+ if (*pString1 == 0) {
+ break;
+ }
+ pString1++;
+ pString2++;
+ count--;
+ continue;
+ }
+ return r;
+ }
+ return 0;
+}
+
+//-----------------------------------------------------------------------------
+/// Copy the first number of bytes from source string to destination string
+/// Return the pointer to the destination string.
+/// \param pDestination Pointer to the start of destination string.
+/// \param pSource Pointer to the start of the source string.
+/// \param count Number of bytes that should be copied.
+//-----------------------------------------------------------------------------
+char * strncpy(char *pDestination, const char *pSource, size_t count)
+{
+ char *pSaveDest = pDestination;
+
+ while (count) {
+ *pDestination = *pSource;
+ if (*pSource == 0) {
+ break;
+ }
+ pDestination++;
+ pSource++;
+ count--;
+ }
+ return pSaveDest;
+}
+
+// Following code is based on the BSD licensed code released by UoC
+// Copyright (c) 1988 Regents of the University of California
+
+int strcmp(const char *s1, const char *s2)
+{
+ while (*s1 == *s2++)
+ if (*s1++ == 0)
+ return (0);
+ return (*(unsigned char *)s1 - *(unsigned char *)--s2);
+}
+
+char *strtok(char *s, const char *delim)
+{
+ static char *last;
+ return strtok_r(s, delim, &last);
+}
+
+char *strtok_r(char *s, const char *delim, char **last)
+{
+ char *spanp;
+ int c, sc;
+ char *tok;
+
+
+ if (s == NULL && (s = *last) == NULL)
+ return (NULL);
+
+ /*
+ * Skip (span) leading delimiters (s += strspn(s, delim), sort of).
+ */
+cont:
+ c = *s++;
+ for (spanp = (char *)delim; (sc = *spanp++) != 0;) {
+ if (c == sc)
+ goto cont;
+ }
+
+ if (c == 0) { /* no non-delimiter characters */
+ *last = NULL;
+ return (NULL);
+ }
+ tok = s - 1;
+
+ /*
+ * Scan token (scan for delimiters: s += strcspn(s, delim), sort of).
+ * Note that delim must have one NUL; we stop if we see that, too.
+ */
+ for (;;) {
+ c = *s++;
+ spanp = (char *)delim;
+ do {
+ if ((sc = *spanp++) == c) {
+ if (c == 0)
+ s = NULL;
+ else
+ s[-1] = 0;
+ *last = s;
+ return (tok);
+ }
+ } while (sc != 0);
+ }
+ /* NOTREACHED */
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pmu.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Controls the power management features of the LPC1343, allowing you
+ to enter sleep/deep-sleep or deep power-down mode.
+
+ For examples of how to enter either mode, see the comments for the
+ functions pmuSleep(), pmuDeepSleep() and pmuPowerDown().
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "core/gpio/gpio.h"
+#include "core/cpu/cpu.h"
+#include "core/timer32/timer32.h"
+#include "pmu.h"
+
+#ifdef CFG_CHIBI
+ #include "drivers/chibi/chb_drvr.h"
+#endif
+#define PMU_WDTCLOCKSPEED_HZ 7812
+
+void pmuSetupHW(void);
+void pmuRestoreHW(void);
+
+
+/**************************************************************************/
+/*!
+ Wakeup interrupt handler
+*/
+/**************************************************************************/
+void WAKEUP_IRQHandler(void)
+{
+ uint32_t regVal;
+
+ // Reconfigure system clock/PLL
+ cpuPllSetup(CPU_MULTIPLIER_6);
+
+ // Clear match bit on timer
+ TMR_TMR32B0EMR = 0;
+
+ // Clear pending bits
+ SCB_STARTRSRP0CLR = SCB_STARTRSRP0CLR_MASK;
+
+ // Clear SLEEPDEEP bit
+ SCB_SCR &= ~SCB_SCR_SLEEPDEEP;
+
+ // Disable the deep sleep timer
+ TMR_TMR32B0TCR = TMR_TMR32B0TCR_COUNTERENABLE_DISABLED;
+
+ /* This handler takes care of all the port pins if they
+ are configured as wakeup source. */
+ regVal = SCB_STARTSRP0;
+ if (regVal != 0)
+ {
+ SCB_STARTRSRP0CLR = regVal;
+ }
+
+ // Reconfigure CT32B0
+ timer32Init(0, TIMER32_DEFAULTINTERVAL);
+ timer32Enable(0);
+
+ // Perform peripheral specific and custom wakeup tasks
+ pmuRestoreHW();
+
+ /* See tracker for bug report. */
+ __asm volatile ("NOP");
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ Setup the clock for the watchdog timer. The default is 7.8125kHz.
+*/
+/**************************************************************************/
+static void pmuWDTClockInit (void)
+{
+ /* Enable WDT clock */
+ SCB_PDRUNCFG &= ~(SCB_PDRUNCFG_WDTOSC);
+
+ /* Configure watchdog clock */
+ /* Freq. = 0.5MHz, div = 64: WDT_OSC = 7.8125kHz */
+ SCB_WDTOSCCTRL = SCB_WDTOSCCTRL_FREQSEL_0_5MHZ |
+ SCB_WDTOSCCTRL_DIVSEL_DIV64;
+
+ // Switch main clock to WDT output
+ SCB_MAINCLKSEL = SCB_MAINCLKSEL_SOURCE_WDTOSC;
+ SCB_MAINCLKUEN = SCB_MAINCLKUEN_UPDATE; // Update clock source
+ SCB_MAINCLKUEN = SCB_MAINCLKUEN_DISABLE; // Toggle update register once
+ SCB_MAINCLKUEN = SCB_MAINCLKUEN_UPDATE;
+
+ // Wait until the clock is updated
+ while (!(SCB_MAINCLKUEN & SCB_MAINCLKUEN_UPDATE));
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the power management unit
+*/
+/**************************************************************************/
+void pmuInit( void )
+{
+ /* Enable all clocks, even those turned off at power up. */
+ SCB_PDRUNCFG &= ~(SCB_PDRUNCFG_WDTOSC_MASK |
+ SCB_PDRUNCFG_SYSOSC_MASK |
+ SCB_PDRUNCFG_ADC_MASK);
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Puts select peripherals in sleep mode.
+
+ This function will put the device into sleep mode. Most gpio pins
+ can be used to wake the device up, but the pins must first be
+ configured for this in pmuInit.
+
+ @section Example
+
+ @code
+ // Configure wakeup sources before going into sleep/deep-sleep.
+ // By default, pin 0.1 is configured as wakeup source (falling edge)
+ pmuInit();
+
+ // Enter sleep mode
+ pmuSleep();
+ @endcode
+*/
+/**************************************************************************/
+void pmuSleep()
+{
+ SCB_PDAWAKECFG = SCB_PDRUNCFG;
+ __asm volatile ("WFI");
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Turns off select peripherals and puts the device in deep-sleep
+ mode.
+
+ The device can be configured to wakeup from deep-sleep mode after a
+ specified delay by supplying a non-zero value to the wakeupSeconds
+ parameter. This will configure CT32B0 to toggle pin 0.1 (CT32B0_MAT2)
+ after x seconds, waking the device up. The timer will be configured
+ to run off the WDT OSC while in deep-sleep mode, meaning that WDTOSC
+ should not be powered off (using the sleepCtrl parameter) when a
+ wakeup delay is specified.
+
+ The sleepCtrl parameter is used to indicate which peripherals should
+ be put in sleep mode (see the SCB_PDSLEEPCFG register for details).
+
+ @param[in] sleepCtrl
+ The bits to set in the SCB_PDSLEEPCFG register. This
+ controls which peripherals will be put in sleep mode.
+ @param[in] wakeupSeconds
+ The number of seconds to wait until the device will
+ wakeup. If you do not wish to wakeup after a specific
+ delay, enter a value of 0.
+
+ @code
+ uint32_t pmuRegVal;
+
+ // Initialise power management unit
+ pmuInit();
+
+ // Put peripherals into sleep mode
+ pmuRegVal = SCB_PDSLEEPCFG_IRCOUT_PD |
+ SCB_PDSLEEPCFG_IRC_PD |
+ SCB_PDSLEEPCFG_FLASH_PD |
+ SCB_PDSLEEPCFG_USBPLL_PD |
+ SCB_PDSLEEPCFG_SYSPLL_PD |
+ SCB_PDSLEEPCFG_SYSOSC_PD |
+ SCB_PDSLEEPCFG_ADC_PD |
+ SCB_PDSLEEPCFG_BOD_PD;
+
+ // Enter deep sleep mode (wakeup after 5 seconds)
+ // By default, pin 0.1 is configured as wakeup source
+ pmuDeepSleep(pmuRegVal, 5);
+ @endcode
+*/
+/**************************************************************************/
+void pmuDeepSleep(uint32_t sleepCtrl, uint32_t wakeupSeconds)
+{
+ // Setup the board for deep sleep mode, shutting down certain
+ // peripherals and remapping pins for lower power
+ pmuSetupHW();
+ SCB_PDAWAKECFG = SCB_PDRUNCFG;
+ sleepCtrl |= (1 << 9) | (1 << 11);
+ SCB_PDSLEEPCFG = sleepCtrl;
+ SCB_SCR |= SCB_SCR_SLEEPDEEP;
+
+ /* Configure system to run from WDT and set TMR32B0 for wakeup */
+ if (wakeupSeconds > 0)
+ {
+ // Make sure WDTOSC isn't disabled in PDSLEEPCFG
+ SCB_PDSLEEPCFG &= ~(SCB_PDSLEEPCFG_WDTOSC_PD);
+
+ // Disable 32-bit timer 0 if currently in use
+ TMR_TMR32B0TCR = TMR_TMR32B0TCR_COUNTERENABLE_DISABLED;
+
+ // Disable internal pullup on 0.1
+ gpioSetPullup(&IOCON_PIO0_1, gpioPullupMode_Inactive);
+
+ /* Enable the clock for CT32B0 */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT32B0);
+
+ /* Configure 0.1 as Timer0_32 MAT2 */
+ IOCON_PIO0_1 &= ~IOCON_PIO0_1_FUNC_MASK;
+ IOCON_PIO0_1 |= IOCON_PIO0_1_FUNC_CT32B0_MAT2;
+
+ /* Set appropriate timer delay */
+ TMR_TMR32B0MR0 = PMU_WDTCLOCKSPEED_HZ * wakeupSeconds;
+
+ /* Configure match control register to raise an interrupt and reset on MR0 */
+ TMR_TMR32B0MCR |= (TMR_TMR32B0MCR_MR0_INT_ENABLED | TMR_TMR32B0MCR_MR0_RESET_ENABLED);
+
+ /* Configure external match register to set 0.1 high on match */
+ TMR_TMR32B0EMR &= ~(0xFF<<4); // Clear EMR config bits
+ TMR_TMR32B0EMR |= TMR_TMR32B0EMR_EMC2_HIGH; // Set MAT2 (0.1) high on match
+
+ /* Enable wakeup interrupts (any I/O pin can be used as a wakeup source) */
+ //NVIC_EnableIRQ(WAKEUP0_IRQn); // P0.0
+ NVIC_EnableIRQ(WAKEUP1_IRQn); // P0.1 (CT32B0_MAT2)
+ //NVIC_EnableIRQ(WAKEUP2_IRQn); // P0.2
+ //NVIC_EnableIRQ(WAKEUP3_IRQn); // P0.3
+ //NVIC_EnableIRQ(WAKEUP4_IRQn); // P0.4
+ //NVIC_EnableIRQ(WAKEUP5_IRQn); // P0.5
+ //NVIC_EnableIRQ(WAKEUP6_IRQn); // P0.6
+ //NVIC_EnableIRQ(WAKEUP7_IRQn); // P0.7
+ //NVIC_EnableIRQ(WAKEUP8_IRQn); // P0.8
+ //NVIC_EnableIRQ(WAKEUP9_IRQn); // P0.9
+ //NVIC_EnableIRQ(WAKEUP10_IRQn); // P0.10
+ //NVIC_EnableIRQ(WAKEUP11_IRQn); // P0.11
+ //NVIC_EnableIRQ(WAKEUP12_IRQn); // P1.0
+ //NVIC_EnableIRQ(WAKEUP13_IRQn); // P1.1
+ //NVIC_EnableIRQ(WAKEUP14_IRQn); // P1.2
+ //NVIC_EnableIRQ(WAKEUP15_IRQn); // P1.3
+ //NVIC_EnableIRQ(WAKEUP16_IRQn); // P1.4
+ //NVIC_EnableIRQ(WAKEUP17_IRQn); // P1.5
+ //NVIC_EnableIRQ(WAKEUP18_IRQn); // P1.6
+ //NVIC_EnableIRQ(WAKEUP19_IRQn); // P1.7
+ //NVIC_EnableIRQ(WAKEUP20_IRQn); // P1.8
+ //NVIC_EnableIRQ(WAKEUP21_IRQn); // P1.9
+ //NVIC_EnableIRQ(WAKEUP22_IRQn); // P1.10
+ //NVIC_EnableIRQ(WAKEUP23_IRQn); // P1.11
+ //NVIC_EnableIRQ(WAKEUP24_IRQn); // P2.0
+ //NVIC_EnableIRQ(WAKEUP25_IRQn); // P2.1
+ //NVIC_EnableIRQ(WAKEUP26_IRQn); // P2.2
+ //NVIC_EnableIRQ(WAKEUP27_IRQn); // P2.3
+ //NVIC_EnableIRQ(WAKEUP28_IRQn); // P2.4
+ //NVIC_EnableIRQ(WAKEUP29_IRQn); // P2.5
+ //NVIC_EnableIRQ(WAKEUP30_IRQn); // P2.6
+ //NVIC_EnableIRQ(WAKEUP31_IRQn); // P2.7
+ //NVIC_EnableIRQ(WAKEUP32_IRQn); // P2.8
+ //NVIC_EnableIRQ(WAKEUP33_IRQn); // P2.9
+ //NVIC_EnableIRQ(WAKEUP34_IRQn); // P2.10
+ //NVIC_EnableIRQ(WAKEUP35_IRQn); // P2.11
+ //NVIC_EnableIRQ(WAKEUP36_IRQn); // P3.0
+ //NVIC_EnableIRQ(WAKEUP37_IRQn); // P3.1
+ //NVIC_EnableIRQ(WAKEUP38_IRQn); // P3.2
+ //NVIC_EnableIRQ(WAKEUP39_IRQn); // P3.3
+
+ /* Use RISING EDGE for wakeup detection. */
+ SCB_STARTAPRP0 |= SCB_STARTAPRP0_APRPIO0_1;
+
+ /* Clear all wakeup sources */
+ SCB_STARTRSRP0CLR = SCB_STARTRSRP0CLR_MASK;
+
+ /* Enable Port 0.1 as wakeup source. */
+ SCB_STARTERP0 |= SCB_STARTERP0_ERPIO0_1;
+
+ // Reconfigure clock to run from WDTOSC
+ pmuWDTClockInit();
+
+ /* Start the timer */
+ TMR_TMR32B0TCR = TMR_TMR32B0TCR_COUNTERENABLE_ENABLED;
+ }
+
+ __asm volatile ("WFI");
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Puts the device in deep power-down mode.
+
+ This function will configure the PMU control register and enter
+ deep power-down mode. Pre-determined values are stored in the four
+ general-purpose registers (PMU_GPREG0..3), which can be used to persist
+ any essential system settings while the device is in deep power-down
+ mode, so long as 3.3V is still available.
+
+ @warning The only way to wake a device up from deep power-down mode
+ is to set a low-level on P1.4. If 3.3V power is lost, the
+ values stored in the four general-purpose registers will
+ also be lost.
+
+ @section Example
+
+ @code
+ #include "core/cpu/cpu.h"
+ #include "core/pmu/pmu.h"
+
+ int main(void)
+ {
+ cpuInit();
+ pmuInit();
+
+ // Enter power-down mode
+ pmuPowerDown();
+
+ while(1)
+ {
+ // Device was woken up by WAKEUP pin
+ }
+ }
+ @endcode
+*/
+/**************************************************************************/
+void pmuPowerDown( void )
+{
+ uint32_t regVal;
+
+ // Make sure HW and external devices are in low power mode
+ pmuSetupHW();
+
+ if ( (PMU_PMUCTRL & ((0x1<<8) | (PMU_PMUCTRL_DPDFLAG))) != 0x0 )
+ {
+ /* Check sleep and deep power down bits. If sleep and/or
+ deep power down mode are entered, clear the PCON bits. */
+ regVal = PMU_PMUCTRL;
+ regVal |= ((0x1<<8) |
+ (PMU_PMUCTRL_DPDEN_SLEEP) |
+ (PMU_PMUCTRL_DPDFLAG));
+ PMU_PMUCTRL = regVal;
+
+ if ( (PMU_GPREG0 != 0x12345678)||(PMU_GPREG1 != 0x87654321)
+ ||(PMU_GPREG2 != 0x56781234)||(PMU_GPREG3 != 0x43218765) )
+ {
+ while (1);
+ }
+ }
+ else
+ {
+ /* If in neither sleep nor deep-sleep mode, enter deep power down mode. */
+ PMU_GPREG0 = 0x12345678;
+ PMU_GPREG1 = 0x87654321;
+ PMU_GPREG2 = 0x56781234;
+ PMU_GPREG3 = 0x43218765;
+ SCB_SCR |= SCB_SCR_SLEEPDEEP;
+ PMU_PMUCTRL = PMU_PMUCTRL_DPDEN_DEEPPOWERDOWN;
+ __asm volatile ("WFI");
+ }
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Configures parts and system peripherals to use lower power
+ before entering sleep mode
+*/
+/**************************************************************************/
+void pmuSetupHW(void)
+{
+ #ifdef CFG_CHIBI
+ chb_sleep(TRUE);
+ #endif
+}
+
+/**************************************************************************/
+/*!
+ @brief Restores parts and system peripherals to an appropriate
+ state after waking up from deep-sleep mode
+*/
+/**************************************************************************/
+void pmuRestoreHW(void)
+{
+ #ifdef CFG_CHIBI
+ // Wakeup Chibi/Transceiver
+ chb_sleep(FALSE);
+ #endif
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pmu.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef __PMU_H__
+#define __PMU_H__
+
+#include "projectconfig.h"
+
+void WAKEUP_IRQHandler( void );
+void pmuInit( void );
+void pmuSleep( void );
+void pmuDeepSleep(uint32_t sleepCtrl, uint32_t wakeupSeconds);
+void pmuPowerDown( void );
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pwm.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Simple PWM example that can be used to control a motor, dim
+ an LED, etc. Uses 16-bit Timer 1 and P1.9 for PWM output.
+
+ @section Example
+
+ @code
+ #include "core/pwm/pwm.h"
+ ...
+
+ // Initialises PWM output on 16-bit Timer 1 and
+ // sets MAT0 (P1.9) as output
+ pwmInit();
+
+ // Setup the pulse-width and duty-cycle
+ pwmSetDutyCycle(50); // Set 50% duty cycle
+ pwmSetFrequencyInMicroseconds(100); // 100 millisecond pulse width
+
+ // Enable PWM output for exactly 50 pulses
+ pwmStartFixed(50);
+
+ // Alternatively, enable PWM output indefinately
+ pwmStart();
+
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "pwm.h"
+
+uint32_t pwmPulseWidth = CFG_PWM_DEFAULT_PULSEWIDTH;
+uint32_t pwmDutyCycle = CFG_PWM_DEFAULT_DUTYCYCLE;
+
+// pwmMaxPulses is used by TIMER16_1_IRQHandler to turn PWM off after
+// a specified number of pulses have been sent. This only relevant when
+// pwmStartFixed() is used.
+volatile uint32_t pwmMaxPulses = 0;
+
+/**************************************************************************/
+/*!
+ Initialises 16-bit Timer 1, and configures the MAT0 output (pin 1.9)
+ to send the PWM output signal.
+*/
+/**************************************************************************/
+void pwmInit(void)
+{
+ /* Enable the clock for CT16B1 */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT16B1);
+
+ /* Configure PIO1.9 as Timer1_16 MAT0 Output */
+ /* Alternatively, PIO1.10 (MAT1) can also be used though
+ the initialisation code will need to be modified */
+ IOCON_PIO1_9 &= ~IOCON_PIO1_9_FUNC_MASK;
+ IOCON_PIO1_9 |= IOCON_PIO1_9_FUNC_CT16B1_MAT0;
+
+ /* Set default pulse width (MR3)*/
+ TMR_TMR16B1MR3 = pwmPulseWidth;
+
+ /* Set default duty cycle (MR0) */
+ TMR_TMR16B1MR0 = (pwmPulseWidth * (100 - pwmDutyCycle)) / 100;
+
+ /* Configure match control register to reset on MR3 */
+ TMR_TMR16B1MCR = (TMR_TMR16B1MCR_MR3_RESET_ENABLED);
+
+ /* External Match Register Settings for PWM */
+ TMR_TMR16B1EMR = TMR_TMR16B1EMR_EMC0_TOGGLE | TMR_TMR16B1EMR_EM0;
+
+ /* Disable Timer1 by default (enabled by pwmStart of pwmStartFixed) */
+ TMR_TMR16B1TCR &= ~TMR_TMR16B1TCR_COUNTERENABLE_MASK;
+
+ /* Enable PWM0 and PWM3 */
+ TMR_TMR16B1PWMC = TMR_TMR16B1PWMC_PWM0_ENABLED | TMR_TMR16B1PWMC_PWM3_ENABLED;
+
+ /* Make sure that the timer interrupt is enabled */
+ NVIC_EnableIRQ(TIMER_16_1_IRQn);
+}
+
+/**************************************************************************/
+/*!
+ Starts the PWM output
+*/
+/**************************************************************************/
+void pwmStart(void)
+{
+ /* Disable interrupt on MR3 in case it was enabled by pwmStartFixed() */
+ TMR_TMR16B1MCR &= ~(TMR_TMR16B1MCR_MR3_INT_MASK);
+
+ /* Enable Timer1 */
+ TMR_TMR16B1TCR = TMR_TMR16B1TCR_COUNTERENABLE_ENABLED;
+}
+
+/**************************************************************************/
+/*!
+ Stops the PWM output
+*/
+/**************************************************************************/
+void pwmStop(void)
+{
+ /* Disable Timer1 */
+ TMR_TMR16B1TCR &= ~(TMR_TMR16B1TCR_COUNTERENABLE_MASK);
+}
+
+/**************************************************************************/
+/*!
+ Starts the PWM output, and stops after the specified number of
+ pulses.
+
+ @param[in] pulses
+ The number of pulses to generate before disabling the
+ PWM output. The output is actually disabled in the
+ timer ISR.
+
+ @warning The PWM output is actually stopped inside the 16-bit
+ timer ISR in "core/timer16/timer16.h".
+*/
+/**************************************************************************/
+void pwmStartFixed(uint32_t pulses)
+{
+ pwmMaxPulses = pulses;
+
+ /* Configure match control register to also raise an interrupt on MR3 */
+ TMR_TMR16B1MCR |= (TMR_TMR16B1MCR_MR3_INT_ENABLED);
+
+ /* Enable Timer1 (it will eventually be disabled in the ISR) */
+ TMR_TMR16B1TCR = TMR_TMR16B1TCR_COUNTERENABLE_ENABLED;
+}
+
+/**************************************************************************/
+/*!
+ Sets the signal's duty cycle in percent (1-100).
+
+ @param[in] percentage
+ The duty-cycle in percentage (the amount of time that
+ the signal is 'high' relative to the time its 'low').
+
+ @returns -1 if an invalid percentage was supplied. Value must be
+ between 1 and 100.
+*/
+/**************************************************************************/
+int pwmSetDutyCycle(uint32_t percentage)
+{
+ if ((percentage < 1) || (percentage > 100))
+ {
+ /* Duty Cycle must be a value between 1 and 100 */
+ return -1;
+ }
+
+ /* Set Duty Cycle (MR0) */
+ TMR_TMR16B1MR0 = (pwmPulseWidth * (100 - (pwmDutyCycle = percentage))) / 100;
+
+ return 0;
+}
+
+/**************************************************************************/
+/*!
+ Sets the signal's frequency/pulse-width to the specified number
+ of ticks.
+
+ @param[in] ticks
+ The duration in clock ticks of each full pulse.
+
+ @returns -1 if a zero-value was provided for ticks.
+*/
+/**************************************************************************/
+int pwmSetFrequencyInTicks(uint16_t ticks)
+{
+ if (ticks < 1)
+ {
+ return -1;
+ }
+
+ /* Set Pulse Width (MR3)*/
+ TMR_TMR16B1MR3 = (pwmPulseWidth = ticks);
+
+ /* Adjust Duty Cycle (MR0) */
+ TMR_TMR16B1MR0 = (pwmPulseWidth * (100 - pwmDutyCycle)) / 100;
+
+ return 0;
+}
+
+/**************************************************************************/
+/*!
+ Sets the signal's frequency/pulse-width to the specified number
+ of microseconds.
+
+ @param[in] us
+ The duration in microseconds of each full pulse.
+
+ @returns -1 if the supplied value exceeds the limits of the 16-bit
+ timer, or if a zero-value was provided.
+
+ @Warning Because a 16-bit timer is used here by default, the
+ maximum frequency is quite small. Running at 36MHz, the
+ largest possible pulse-width/frequency is ~1,82mS or
+ 1820 microSeconds. At 12MHz its 5461 uS, and at 48MHz
+ its 1365 uS.
+*/
+/**************************************************************************/
+int pwmSetFrequencyInMicroseconds(uint16_t us)
+{
+ if (us < 1)
+ {
+ return -1;
+ }
+
+ uint32_t ticks = (((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / 1000000) * us);
+ if (ticks > 0xFFFF)
+ {
+ /* Delay exceeds the upper limit for the 16-bit timer */
+ return -1;
+ }
+
+ /* Set Pulse Width (MR3)*/
+ TMR_TMR16B1MR3 = (pwmPulseWidth = ticks);
+
+ /* Adjust Duty Cycle (MR0) */
+ TMR_TMR16B1MR0 = (pwmPulseWidth * (100 - pwmDutyCycle)) / 100;
+
+ return 0;
+}
+
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pwm.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _PWM_H_
+#define _PWM_H_
+
+#include "projectconfig.h"
+
+void pwmInit( void );
+void pwmStart( void );
+void pwmStop( void );
+void pwmStartFixed( uint32_t pulses );
+int pwmSetDutyCycle( uint32_t percentage );
+int pwmSetFrequencyInTicks( uint16_t ticks );
+int pwmSetFrequencyInMicroseconds(uint16_t us );
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file rom_drivers.h
+ @author NXP Semiconductor
+*/
+/**************************************************************************/
+
+#ifndef ROM_DRIVERS_H_
+#define ROM_DRIVERS_H_
+
+#include "sysdefs.h"
+
+typedef struct _USB_DEVICE_INFO
+{
+ uint16_t DevType;
+ uint32_t DevDetailPtr;
+} USB_DEV_INFO;
+
+typedef struct _USBD
+{
+ void (*init_clk_pins)(void);
+ void (*isr)(void);
+ void (*init)( USB_DEV_INFO * DevInfoPtr );
+ void (*connect)(uint32_t con);
+} USBD;
+
+typedef struct _ROM
+{
+ const USBD * pUSBD;
+} ROM;
+
+typedef struct _MSC_DEVICE_INFO {
+ uint16_t idVendor;
+ uint16_t idProduct;
+ uint16_t bcdDevice;
+ uint32_t StrDescPtr;
+ uint32_t MSCInquiryStr;
+ uint32_t BlockCount;
+ uint32_t BlockSize;
+ uint32_t MemorySize;
+ void (*MSC_Write)( uint32_t offset, uint8_t src[], uint32_t length);
+ void (*MSC_Read)( uint32_t offset, uint8_t dst[], uint32_t length);
+} MSC_DEVICE_INFO;
+
+typedef struct _HID_DEVICE_INFO
+{
+ uint16_t idVendor;
+ uint16_t idProduct;
+ uint16_t bcdDevice;
+ uint32_t StrDescPtr;
+ uint8_t InReportCount;
+ uint8_t OutReportCount;
+ uint8_t SampleInterval;
+ void (*InReport)(uint8_t src[], uint32_t length);
+ void (*OutReport)(uint8_t dst[], uint32_t length);
+} HID_DEVICE_INFO;
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ssp.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Generic code for SSP/SPI communications. By default, the SSP block
+ is initialised in SPI master mode.
+
+ @section Example
+
+ @code
+ #include "core/cpu/cpu.h"
+ #include "core/ssp/ssp.h"
+ ...
+ cpuInit();
+ sspInit(0, sspClockPolarity_High, sspClockPhase_RisingEdge);
+ ...
+ uint8_t request[SSP_FIFOSIZE];
+ uint8_t response[SSP_FIFOSIZE];
+
+ // Send 0x9C to the slave device and wait for a response
+ request[0] = 0x80 | 0x1C;
+ // Toggle the select pin
+ ssp0Select();
+ // Send 1 byte from the request buffer
+ sspSend(0, (uint8_t *)&request, 1);
+ // Receive 1 byte into the response buffer
+ sspReceive(0, (uint8_t *)&response, 1);
+ // Reset the select pin
+ ssp0Deselect();
+ // Print the results
+ debug_printf("Ox%x ", response[0]);
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "ssp.h"
+#include "core/gpio/gpio.h"
+
+/* Statistics for all interrupts */
+volatile uint32_t interruptRxStat = 0;
+volatile uint32_t interruptOverRunStat = 0;
+volatile uint32_t interruptRxTimeoutStat = 0;
+
+/**************************************************************************/
+/*!
+ @brief SSP0 interrupt handler for SPI communication
+
+ The algorithm is, if RXFIFO is at least half full,
+ start receive until it's empty; if TXFIFO is at least
+ half empty, start transmit until it's full.
+ This will maximize the use of both FIFOs and performance.
+*/
+/**************************************************************************/
+void SSP_IRQHandler (void)
+{
+ uint32_t regValue;
+
+ regValue = SSP_SSP0MIS;
+
+ /* Check for overrun interrupt */
+ if ( regValue & SSP_SSP0MIS_RORMIS_FRMRCVD )
+ {
+ interruptOverRunStat++;
+ SSP_SSP0ICR = SSP_SSP0ICR_RORIC_CLEAR; // Clear interrupt
+ }
+
+ /* Check for timeout interrupt */
+ if ( regValue & SSP_SSP0MIS_RTMIS_NOTEMPTY )
+ {
+ interruptRxTimeoutStat++;
+ SSP_SSP0ICR = SSP_SSP0ICR_RTIC_CLEAR; // Clear interrupt
+ }
+
+ /* Check if Rx buffer is at least half-full */
+ if ( regValue & SSP_SSP0MIS_RXMIS_HALFFULL )
+ {
+ // ToDo: Receive until it's empty
+ interruptRxStat++;
+ }
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the SSP0 port
+
+ By default, SSP0 is set to SPI frame-format with 8-bit data. Pin 2.11
+ is routed to serve as serial clock (SCK), and SSEL (0.2) is set to
+ GPIO to allow manual control of when the SPI port is enabled or
+ disabled. Overrun and timeout interrupts are both enabled.
+
+ @param[in] portNum
+ The SPI port to use (0..1)
+ @param[in] polarity
+ Indicates whether the clock should be held high
+ (sspClockPolarity_High) or low (sspClockPolarity_Low)
+ when inactive.
+ @param[in] phase
+ Indicates whether new bits start on the leading
+ (sspClockPhase_RisingEdge) or falling
+ (sspClockPhase_FallingEdge) edge of clock transitions.
+
+ @note sspSelect() and sspDeselect() macros have been defined in
+ ssp.h to control the SSEL line without having to know the
+ specific pin being used.
+*/
+/**************************************************************************/
+void sspInit (uint8_t portNum, sspClockPolarity_t polarity, sspClockPhase_t phase)
+{
+ gpioInit();
+
+ if (portNum == 0)
+ {
+ /* Reset SSP */
+ SCB_PRESETCTRL &= ~SCB_PRESETCTRL_SSP0_MASK;
+ SCB_PRESETCTRL |= SCB_PRESETCTRL_SSP0_RESETDISABLED;
+
+ /* Enable AHB clock to the SSP domain. */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_SSP0);
+
+ /* Divide by 1 (SSPCLKDIV also enables to SSP CLK) */
+ SCB_SSP0CLKDIV = SCB_SSP0CLKDIV_DIV1;
+
+ /* Set P0.8 to SSP MISO */
+ IOCON_PIO0_8 &= ~IOCON_PIO0_8_FUNC_MASK;
+ IOCON_PIO0_8 |= IOCON_PIO0_8_FUNC_MISO0;
+
+ /* Set P0.9 to SSP MOSI */
+ IOCON_PIO0_9 &= ~IOCON_PIO0_9_FUNC_MASK;
+ IOCON_PIO0_9 |= IOCON_PIO0_9_FUNC_MOSI0;
+
+ /* Set 2.11 to SSP SCK (0.6 and 0.10 can also be used) */
+ #ifdef CFG_SSP0_SCKPIN_2_11
+ IOCON_SCKLOC = IOCON_SCKLOC_SCKPIN_PIO2_11;
+ IOCON_PIO2_11 = IOCON_PIO2_11_FUNC_SCK0;
+ #endif
+
+ /* Set 0.6 to SSP SCK (2.11 and 0.10 can also be used) */
+ #ifdef CFG_SSP0_SCKPIN_0_6
+ IOCON_SCKLOC = IOCON_SCKLOC_SCKPIN_PIO0_6;
+ IOCON_PIO0_6 = IOCON_PIO0_6_FUNC_SCK;
+ #endif
+
+ /* Set P0.2/SSEL to GPIO output and high */
+ IOCON_PIO0_2 &= ~IOCON_PIO0_2_FUNC_MASK;
+ IOCON_PIO0_2 |= IOCON_PIO0_2_FUNC_GPIO;
+ gpioSetDir(SSP0_CSPORT, SSP0_CSPIN, 1);
+ gpioSetValue(SSP0_CSPORT, SSP0_CSPIN, 1);
+ gpioSetPullup(&IOCON_PIO0_2, gpioPullupMode_Inactive); // Board has external pull-up
+
+ /* If SSP0CLKDIV = DIV1 -- (PCLK / (CPSDVSR × [SCR+1])) = (72,000,000 / (2 x [8 + 1])) = 4.0 MHz */
+ uint32_t configReg = ( SSP_SSP0CR0_DSS_8BIT // Data size = 8-bit
+ | SSP_SSP0CR0_FRF_SPI // Frame format = SPI
+ | SSP_SSP0CR0_SCR_8); // Serial clock rate = 8
+
+ // Set clock polarity
+ if (polarity == sspClockPolarity_High)
+ configReg |= SSP_SSP0CR0_CPOL_HIGH; // Clock polarity = High between frames
+ else
+ configReg &= ~SSP_SSP0CR0_CPOL_MASK; // Clock polarity = Low between frames
+
+ // Set edge transition
+ if (phase == sspClockPhase_FallingEdge)
+ configReg |= SSP_SSP0CR0_CPHA_SECOND; // Clock out phase = Trailing edge clock transition
+ else
+ configReg &= ~SSP_SSP0CR0_CPHA_MASK; // Clock out phase = Leading edge clock transition
+
+ // Assign config values to SSP0CR0
+ SSP_SSP0CR0 = configReg;
+
+ /* Clock prescale register must be even and at least 2 in master mode */
+ SSP_SSP0CPSR = SSP_SSP0CPSR_CPSDVSR_DIV2;
+
+ /* Clear the Rx FIFO */
+ uint8_t i, Dummy=Dummy;
+ for ( i = 0; i < SSP_FIFOSIZE; i++ )
+ {
+ Dummy = SSP_SSP0DR;
+ }
+
+ /* Enable the SSP Interrupt */
+ NVIC_EnableIRQ(SSP_IRQn);
+
+ /* Set SSPINMS registers to enable interrupts
+ * enable all error related interrupts */
+ SSP_SSP0IMSC = ( SSP_SSP0IMSC_RORIM_ENBL // Enable overrun interrupt
+ | SSP_SSP0IMSC_RTIM_ENBL); // Enable timeout interrupt
+
+ /* Enable device and set it to master mode, no loopback */
+ SSP_SSP0CR1 = SSP_SSP0CR1_SSE_ENABLED | SSP_SSP0CR1_MS_MASTER | SSP_SSP0CR1_LBM_NORMAL;
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends a block of data to the SSP0 port
+
+ @param[in] portNum
+ The SPI port to use (0..1)
+ @param[in] buf
+ Pointer to the data buffer
+ @param[in] length
+ Block length of the data buffer
+*/
+/**************************************************************************/
+void sspSend (uint8_t portNum, uint8_t *buf, uint32_t length)
+{
+ uint32_t i;
+ uint8_t Dummy = Dummy;
+
+ if (portNum == 0)
+ {
+ for (i = 0; i < length; i++)
+ {
+ /* Move on only if NOT busy and TX FIFO not full. */
+ while ((SSP_SSP0SR & (SSP_SSP0SR_TNF_NOTFULL | SSP_SSP0SR_BSY_BUSY)) != SSP_SSP0SR_TNF_NOTFULL);
+ SSP_SSP0DR = *buf;
+ buf++;
+
+ while ( (SSP_SSP0SR & (SSP_SSP0SR_BSY_BUSY|SSP_SSP0SR_RNE_NOTEMPTY)) != SSP_SSP0SR_RNE_NOTEMPTY );
+ /* Whenever a byte is written, MISO FIFO counter increments, Clear FIFO
+ on MISO. Otherwise, when SSP0Receive() is called, previous data byte
+ is left in the FIFO. */
+ Dummy = SSP_SSP0DR;
+ }
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Receives a block of data from the SSP0 port
+
+ @param[in] portNum
+ The SPI port to use (0..1)
+ @param[in] buf
+ Pointer to the data buffer
+ @param[in] length
+ Block length of the data buffer
+*/
+/**************************************************************************/
+void sspReceive(uint8_t portNum, uint8_t *buf, uint32_t length)
+{
+ uint32_t i;
+
+ if (portNum == 0)
+ {
+ for ( i = 0; i < length; i++ )
+ {
+ /* As long as the receive FIFO is not empty, data can be received. */
+ SSP_SSP0DR = 0xFF;
+
+ /* Wait until the Busy bit is cleared */
+ while ( (SSP_SSP0SR & (SSP_SSP0SR_BSY_BUSY|SSP_SSP0SR_RNE_NOTEMPTY)) != SSP_SSP0SR_RNE_NOTEMPTY );
+
+ *buf = SSP_SSP0DR;
+ buf++;
+ }
+ }
+
+ return;
+}
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ssp.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _SSP_H_
+#define _SSP_H_
+
+#include "projectconfig.h"
+#include "core/gpio/gpio.h"
+
+#define SSP_FIFOSIZE 8 /* SPI read and write buffer size */
+#define SSP_MAX_TIMEOUT 0xFF
+
+#define SSP0_CSPORT 0
+#define SSP0_CSPIN 2
+
+/* Macro definitions to enable and disable SPI */
+#define ssp0Select() do {gpioSetValue(SSP0_CSPORT, SSP0_CSPIN, 0);} while (0)
+#define ssp0Deselect() do {gpioSetValue(SSP0_CSPORT, SSP0_CSPIN, 1);} while (0)
+
+/**************************************************************************/
+/*!
+ Indicates whether the clock should be high or low between frames.
+*/
+/**************************************************************************/
+typedef enum sspClockPolarity_e
+{
+ sspClockPolarity_Low = 0,
+ sspClockPolarity_High
+}
+sspClockPolarity_t;
+
+/**************************************************************************/
+/*!
+ Indicates whether the bits start at the rising or falling edge of
+ the clock transition.
+*/
+/**************************************************************************/
+typedef enum sspClockPhase_e
+{
+ sspClockPhase_RisingEdge = 0,
+ sspClockPhase_FallingEdge
+}
+sspClockPhase_t;
+
+extern void SSP_IRQHandler (void);
+void sspInit (uint8_t portNum, sspClockPolarity_t polarity, sspClockPhase_t phase);
+void sspSend (uint8_t portNum, uint8_t *buf, uint32_t length);
+void sspReceive (uint8_t portNum, uint8_t *buf, uint32_t length);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file systick.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Controls the 24-bit 'system tick' clock, which can be used as a
+ generic timer or to control time sharing with an embedded real-time
+ operating system (such as FreeRTOS).
+
+ @section Example
+
+ @code
+ #include "core/cpu/cpu.h"
+ #include "core/systick/systick.h"
+
+ void main (void)
+ {
+ cpuInit();
+
+ // Start systick timer with one tick every 10ms
+ systickInit(10);
+
+ while(1)
+ {
+ }
+ }
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "systick.h"
+
+#ifdef CFG_SDCARD
+#include "drivers/fatfs/diskio.h"
+volatile uint32_t fatTicks = 0;
+#endif
+
+volatile uint32_t systickTicks = 0; // 1ms tick counter
+volatile uint32_t systickRollovers = 0;
+
+/**************************************************************************/
+/*!
+ @brief Systick interrupt handler
+*/
+/**************************************************************************/
+void SysTick_Handler (void)
+{
+ systickTicks++;
+
+ // Increment rollover counter
+ if (systickTicks == 0xFFFFFFFF) systickRollovers++;
+
+ #ifdef CFG_SDCARD
+ fatTicks++;
+ if (fatTicks == 10)
+ {
+ fatTicks = 0;
+ disk_timerproc();
+ }
+ #endif
+}
+
+/**************************************************************************/
+/*!
+ @brief Configures the systick timer
+
+ @param[in] ticks
+ The number of clock cycles between each tick of the
+ systick timer. for example, 'CFG_CPU_CCLK / 1000' =
+ 1 millisecond. This value must not exceed 0x00FFFFFF.
+*/
+/**************************************************************************/
+static uint32_t systickConfig(uint32_t ticks)
+{
+ // Check if 'ticks' is greater than maximum value
+ if (ticks > SYSTICK_STRELOAD_MASK)
+ {
+ return (1);
+ }
+
+ // Reset counter
+ systickTicks = 0;
+
+ // Set reload register
+ SYSTICK_STRELOAD = (ticks & SYSTICK_STRELOAD_MASK) - 1;
+
+ // Load the systick counter value
+ SYSTICK_STCURR = 0;
+
+ // Enable systick IRQ and timer
+ SYSTICK_STCTRL = SYSTICK_STCTRL_CLKSOURCE |
+ SYSTICK_STCTRL_TICKINT |
+ SYSTICK_STCTRL_ENABLE;
+
+ return (0);
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the systick timer
+
+ @param[in] delayMs
+ The number of milliseconds between each tick of the systick
+ timer.
+
+ @note The shortest possible delay is 1 millisecond, which will
+ allow fine grained delays, but will cause more load on the
+ system than a 10mS delay. The resolution of the systick
+ timer needs to be balanced with the amount of processing
+ time you can spare. The delay should really only be set
+ to 1 mS if you genuinely have a need for 1mS delays,
+ otherwise a higher value like 5 or 10 mS is probably
+ more appropriate.
+*/
+/**************************************************************************/
+void systickInit (uint32_t delayMs)
+{
+ systickConfig ((CFG_CPU_CCLK / 1000) * delayMs);
+}
+
+/**************************************************************************/
+/*!
+ @brief Causes a blocking delay for 'delayTicks' ticks on the
+ systick timer. For example: systickDelay(100) would cause
+ a blocking delay for 100 ticks of the systick timer.
+
+ @param[in] delayTicks
+ The number of systick ticks to cause a blocking delay for
+
+ @Note This function takes into account the fact that the tick
+ counter may eventually roll over to 0 once it reaches
+ 0xFFFFFFFF.
+*/
+/**************************************************************************/
+void systickDelay (uint32_t delayTicks)
+{
+ uint32_t curTicks;
+ curTicks = systickTicks;
+
+ // Make sure delay is at least 1 tick in case of division, etc.
+ if (delayTicks == 0) delayTicks = 1;
+
+ if (curTicks > 0xFFFFFFFF - delayTicks)
+ {
+ // Rollover will occur during delay
+ while (systickTicks >= curTicks)
+ {
+ while (systickTicks < (delayTicks - (0xFFFFFFFF - curTicks)));
+ }
+ }
+ else
+ {
+ while ((systickTicks - curTicks) < delayTicks);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Returns the current value of the systick timer counter.
+ This value is incremented by one every time an interrupt
+ fires for the systick timer.
+*/
+/**************************************************************************/
+uint32_t systickGetTicks(void)
+{
+ return systickTicks;
+}
+
+/**************************************************************************/
+/*!
+ @brief Returns the current value of the systick timer rollover
+ counter. This value is incremented by one every time the
+ tick counter rolls over from 0xFFFFFFFF to 0.
+*/
+/**************************************************************************/
+uint32_t systickGetRollovers(void)
+{
+ return systickRollovers;
+}
+
+/**************************************************************************/
+/*!
+ @brief Returns the approximate number of seconds that the
+ systick timer has been running.
+*/
+/**************************************************************************/
+uint32_t systickGetSecondsActive(void)
+{
+ uint32_t currentTick = systickTicks;
+ uint32_t rollovers = systickRollovers;
+ uint32_t secsActive = currentTick / (1000 / CFG_SYSTICK_DELAY_IN_MS);
+ secsActive += rollovers * (0xFFFFFFFF / (1000 / CFG_SYSTICK_DELAY_IN_MS));
+
+ return secsActive;
+}
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file systick.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _SYSTICK_H_
+#define _SYSTICK_H_
+
+#include "projectconfig.h"
+
+void systickInit (uint32_t delayMs);
+void systickDelay (uint32_t delayTicks);
+uint32_t systickGetTicks(void);
+uint32_t systickGetRollovers(void);
+uint32_t systickGetSecondsActive(void);
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file timer16.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section DESCRIPTION
+
+ Generic code for both 16-bit timers.
+
+ @warning 16-bit timers are limited to roughly ~0.91ms (or 910uS) on
+ a system running at 72MHz since:
+ @code
+ 1 mS = CFG_CPU_CCLK / 1000
+ = 72000000 / 1000
+ = 72000 'ticks'
+ @endcode
+ Meaning that 0xFFFF (65535) 'ticks' = 0.910208 milliseconds
+ or 910 microseconds.
+
+ @section Example
+
+ @code
+ #include "/core/cpu/cpu.h"
+ #include "/core/timer16/timer16.h"
+
+ // Instantiated in timer16.h
+ extern volatile uint32_t timer16_0_counter;
+ ...
+ cpuInit();
+
+ // Initialise timer0 with a delay of 0xFFFF, which will cause the
+ // timer interrupt to fire every 65535 ticks and increment
+ // timer16_0_counter by 1
+ timer16Init(0, 0xFFFF);
+
+ // Enable the timer
+ timer16Enable(0);
+
+ // At this point timer16_0_counter should start incrementing by 1
+ // every 65535 ticks
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "timer16.h"
+
+volatile uint32_t timer16_0_counter = 0;
+volatile uint32_t timer16_1_counter = 0;
+
+#ifdef CFG_PWM
+ volatile uint32_t pwmCounter = 0;
+ extern volatile uint32_t pwmMaxPulses; // See drivers/pwm/pwm.c
+#endif
+
+/**************************************************************************/
+/*!
+ @brief Causes a blocking delay for the specified number of
+ clock ticks.
+
+ @note The exact duration of this delay depends on the speed of the
+ system clock, but it will invariably be short because of the
+ 16-bit limitation. For example, on a system with a 72MHz
+ clock, a 1mS delay would be equal to 72,000 ticks, which is
+ already above the maximum 16-bit value of 65,535. Thus, the
+ maximum delay measured in mS with a 72MHz clock is ~0.91mS.
+
+ @param[in] timerNum
+ The 16-bit timer to user (0..1)
+ @param[in] delayInTicks
+ The number of clock ticks to delay (0..65534)
+
+ @section Example
+
+ @code
+ #include "/core/cpu/cpu.h"
+ #include "/core/timer16/timer16.h"
+
+ int main(void)
+ {
+ cpuInit();
+
+ // Initialise timer 0 ... delay is provided but not used here
+ timer16Init(0, 0xFFFF);
+
+ // Enable the timer
+ timer16Enable(0);
+
+ while(1)
+ {
+ // Cause blocking delay for 36000 ticks (0.5mS @ 72MHz)
+ // Note: The delay must be 65534 or less (16-bit value)
+ timer16DelayTicks(0, 36000);
+ }
+ }
+ @endcode
+*/
+/**************************************************************************/
+void timer16DelayTicks(uint8_t timerNum, uint16_t delayInTicks)
+{
+ // ToDo: Verify incoming value
+
+ if (timerNum == 0)
+ {
+ /* Reset the timer */
+ TMR_TMR16B0TCR = TMR_TMR16B0TCR_COUNTERRESET_ENABLED;
+
+ /* Set the prescaler to zero */
+ TMR_TMR16B0PR = 0x00;
+
+ TMR_TMR16B0MR0 = delayInTicks;
+
+ /* Reset all interrupts */
+ TMR_TMR16B0IR = TMR_TMR16B0IR_MASK_ALL;
+
+ /* Stop timer on match (MR0) */
+ TMR_TMR16B0MCR = TMR_TMR16B0MCR_MR0_STOP_ENABLED;
+
+ /* Start timer */
+ TMR_TMR16B0TCR = TMR_TMR16B0TCR_COUNTERENABLE_ENABLED;
+
+ /* Wait until the delay time has elapsed */
+ while (TMR_TMR16B0TCR & TMR_TMR16B0TCR_COUNTERENABLE_ENABLED);
+ }
+
+ else if (timerNum == 1)
+ {
+ /* Reset the timer */
+ TMR_TMR16B1TCR = TMR_TMR16B1TCR_COUNTERRESET_ENABLED;
+
+ /* Set the prescaler to zero */
+ TMR_TMR16B1PR = 0x00;
+
+ TMR_TMR16B1MR0 = delayInTicks;
+
+ /* Reset all interrupts */
+ TMR_TMR16B1IR = TMR_TMR16B1IR_MASK_ALL;
+
+ /* Stop timer on match (MR0) */
+ TMR_TMR16B1MCR = TMR_TMR16B1MCR_MR0_STOP_ENABLED;
+
+ /* Start timer */
+ TMR_TMR16B1TCR = TMR_TMR16B1TCR_COUNTERENABLE_ENABLED;
+
+ /* Wait until the delay time has elapsed */
+ while (TMR_TMR16B1TCR & TMR_TMR16B1TCR_COUNTERENABLE_ENABLED);
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Causes a blocking delay for the specified number of
+ microseconds
+
+ @warning The maximum delay in uS will depend on the clock speed,
+ but running at 72MHz the maximum delay (MR = 0xFFFF)
+ would be 910uS (0xFFFF / 72 = 910), or 0.91 milliseconds.
+
+ @param[in] timerNum
+ The 16-bit timer to user (0..1)
+ @param[in] delayInUs
+ The number of microseconds to wait
+
+ @section Example
+
+ @code
+ #include "/core/cpu/cpu.h"
+ #include "/core/timer16/timer16.h"
+
+ int main(void)
+ {
+ cpuInit();
+
+ // Initialise timer 0 ... delay is provided but not used here
+ timer16Init(0, 0xFFFF);
+
+ // Enable the timer
+ timer16Enable(0);
+
+ while(1)
+ {
+ // Cause blocking delay for 500 microseconds (0.5mS)
+ timer16DelayUS(0, 500);
+ }
+ }
+ @endcode
+*/
+/**************************************************************************/
+void timer16DelayUS(uint8_t timerNum, uint16_t delayInUS)
+{
+ // ToDo: Check if the appropriate timer is enabled first?
+
+ if (timerNum == 0)
+ {
+ /* Reset the timer */
+ TMR_TMR16B0TCR = TMR_TMR16B0TCR_COUNTERRESET_ENABLED;
+
+ /* Set the prescaler to zero */
+ TMR_TMR16B0PR = 0x00;
+
+ TMR_TMR16B0MR0 = delayInUS * ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV)/1000000);
+
+ /* Reset all interrupts */
+ TMR_TMR16B0IR = TMR_TMR16B0IR_MASK_ALL;
+
+ /* Stop timer on match (MR0) */
+ TMR_TMR16B0MCR = TMR_TMR16B0MCR_MR0_STOP_ENABLED;
+
+ /* Start timer */
+ TMR_TMR16B0TCR = TMR_TMR16B0TCR_COUNTERENABLE_ENABLED;
+
+ /* Wait until the delay time has elapsed */
+ while (TMR_TMR16B0TCR & TMR_TMR16B0TCR_COUNTERENABLE_ENABLED);
+ }
+
+ else if (timerNum == 1)
+ {
+ /* Reset the timer */
+ TMR_TMR16B1TCR = TMR_TMR16B1TCR_COUNTERRESET_ENABLED;
+
+ /* Set the prescaler to zero */
+ TMR_TMR16B1PR = 0x00;
+
+ TMR_TMR16B1MR0 = delayInUS * ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV)/1000000);
+
+ /* Reset all interrupts */
+ TMR_TMR16B1IR = TMR_TMR16B1IR_MASK_ALL;
+
+ /* Stop timer on match (MR0) */
+ TMR_TMR16B1MCR = TMR_TMR16B1MCR_MR0_STOP_ENABLED;
+
+ /* Start timer */
+ TMR_TMR16B1TCR = TMR_TMR16B1TCR_COUNTERENABLE_ENABLED;
+
+ /* Wait until the delay time has elapsed */
+ while (TMR_TMR16B1TCR & TMR_TMR16B1TCR_COUNTERENABLE_ENABLED);
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Interrupt handler for 16-bit timer 0
+*/
+/**************************************************************************/
+void TIMER16_0_IRQHandler(void)
+{
+ /* Clear the interrupt flag */
+ TMR_TMR16B0IR = TMR_TMR16B0IR_MR0;
+
+ /* Increment timer counter by 1 (it will automatically roll back to 0) */
+ timer16_0_counter++;
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Interrupt handler for 16-bit timer 1
+*/
+/**************************************************************************/
+void TIMER16_1_IRQHandler(void)
+{
+ /* Clear the interrupt flag */
+ TMR_TMR16B1IR = TMR_TMR16B1IR_MR0;
+
+ /* Increment timer counter by 1 (it will automatically roll back to 0) */
+ timer16_1_counter++;
+
+ #ifdef CFG_PWM
+ /* Check if the PWM output should be disabled after pwmMaxPulses pulses */
+ /* See "drivers/pwm/pwm.c" */
+ if (TMR_TMR16B1IR & TMR_TMR16B1IR_MR3)
+ {
+ /* Clear the interrupt flag */
+ TMR_TMR16B1IR = TMR_TMR16B1IR_MR3;
+
+ if (pwmMaxPulses > 0)
+ {
+ pwmCounter++;
+ if (pwmCounter == pwmMaxPulses)
+ {
+ /* Disable interrupt on MR3 */
+ TMR_TMR16B1MCR &= ~(TMR_TMR16B1MCR_MR3_INT_MASK);
+ /* Disable Timer */
+ TMR_TMR16B1TCR &= ~(TMR_TMR16B1TCR_COUNTERENABLE_MASK);
+ /* Reset the counter variables */
+ pwmCounter = 0;
+ pwmMaxPulses = 0;
+ }
+ }
+ }
+ #endif
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Enables the specified timer
+
+ @param[in] timerNum
+ The 16-bit timer to enable (0..1)
+*/
+/**************************************************************************/
+void timer16Enable(uint8_t timerNum)
+{
+ if ( timerNum == 0 )
+ {
+ TMR_TMR16B0TCR = TMR_TMR16B0TCR_COUNTERENABLE_ENABLED;
+ }
+
+ else if (timerNum == 1)
+ {
+ TMR_TMR16B1TCR = TMR_TMR16B1TCR_COUNTERENABLE_ENABLED;
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Disables the specified timer
+
+ @param[in] timerNum
+ The 16-bit timer to disable (0..1)
+*/
+/**************************************************************************/
+void timer16Disable(uint8_t timerNum)
+{
+ if ( timerNum == 0 )
+ {
+ TMR_TMR16B0TCR = TMR_TMR16B0TCR_COUNTERENABLE_DISABLED;
+ }
+
+ else if (timerNum == 1)
+ {
+ TMR_TMR16B1TCR = TMR_TMR16B1TCR_COUNTERENABLE_DISABLED;
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Resets the specified timer
+
+ @param[in] timerNum
+ The 16-bit timer to reset (0..1)
+*/
+/**************************************************************************/
+void timer16Reset(uint8_t timerNum)
+{
+ uint32_t regVal;
+
+ if ( timerNum == 0 )
+ {
+ regVal = TMR_TMR16B0TCR;
+ regVal |= TMR_TMR16B0TCR_COUNTERRESET_ENABLED;
+ TMR_TMR16B0TCR = regVal;
+ }
+
+ else if (timerNum == 1)
+ {
+ regVal = TMR_TMR16B1TCR;
+ regVal |= TMR_TMR16B1TCR_COUNTERRESET_ENABLED;
+ TMR_TMR16B1TCR = regVal;
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the specified 16-bit timer, sets the timer
+ interval, resets the timer, and configures the interrupt
+ handler.
+
+ Initialises a 16-bit timer with the supplied timer interval (the
+ amount of time that passes between each timer 'tick'). Every time that
+ this interval elapses, the timer's interrupt will be fired and the
+ appropriate counter variable will be incremented by one (For example,
+ with CT16B0, 'timer16_0_counter' would be incremented).
+
+ @param[in] timerNum
+ The 16-bit timer to initiliase (0..1)
+ @param[in] timerInterval
+ The number of clock 'ticks' between resets (0..65534)
+
+ @warning Care needs to be taken when configuring the timers since
+ the pins are all multiplexed with other peripherals. This
+ code is provided as a starting point, but it will need to
+ be adjusted according to your own situation and
+ pin/peripheral requirements
+*/
+/**************************************************************************/
+void timer16Init(uint8_t timerNum, uint16_t timerInterval)
+{
+ // If timerInterval is invalid, use the default value
+ if (timerInterval < 1)
+ {
+ timerInterval = TIMER16_DEFAULTINTERVAL;
+ }
+
+ if ( timerNum == 0 )
+ {
+ /* Enable the clock for CT16B0 */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT16B0);
+
+ /* The physical pins associated with CT16B0 are not enabled by
+ default in order to avoid conflicts with other peripherals.
+ Pin 0.10 (CT16B0_MAT2), for example, can not be used while
+ debugging with a hardware debugger. If you require one or
+ more of these pins, simply uncomment the code below */
+
+ /* Configure PIO0.2 as Timer0_16 CAP0 */
+ // IOCON_PIO0_2 &= ~IOCON_PIO0_2_FUNC_MASK;
+ // IOCON_PIO0_2 |= IOCON_PIO0_2_FUNC_CT16B0_CAP0;
+
+ /* Configure PIO0.8 as Timer0_16 MAT0 */
+ // IOCON_PIO0_8 &= ~IOCON_PIO0_8_FUNC_MASK;
+ // IOCON_PIO0_8 |= IOCON_PIO0_8_FUNC_CT16B0_MAT0;
+
+ /* Configure PIO0.9 as Timer0_16 MAT1 */
+ // IOCON_PIO0_9 &= ~IOCON_PIO0_9_FUNC_MASK;
+ // IOCON_PIO0_9 |= IOCON_PIO0_9_FUNC_CT16B0_MAT1;
+
+ /* Configure PIO0.10 as Timer0_16 MAT3 */
+ // IOCON_JTAG_TCK_PIO0_10 &= ~IOCON_JTAG_TCK_PIO0_10_FUNC_MASK;
+ // IOCON_JTAG_TCK_PIO0_10 |= IOCON_JTAG_TCK_PIO0_10_FUNC_CT16B0_MAT2;
+
+ timer16_0_counter = 0;
+ TMR_TMR16B0MR0 = timerInterval;
+
+ /* Configure match control register to raise an interrupt and reset on MR0 */
+ TMR_TMR16B0MCR = (TMR_TMR16B0MCR_MR0_INT_ENABLED | TMR_TMR16B0MCR_MR0_RESET_ENABLED);
+
+ /* Enable the TIMER0 interrupt */
+ NVIC_EnableIRQ(TIMER_16_0_IRQn);
+ }
+
+ else if ( timerNum == 1 )
+ {
+ /* Enable the clock for CT16B1 */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT16B1);
+
+ /* The physical pins associated with CT16B0 are not enabled by
+ default in order to avoid conflicts with other peripherals.
+ Pin 0.10 (CT16B0_MAT2), for example, can not be used while
+ debugging with a hardware debugger. If you require one or
+ more of these pins, simply uncomment the code below */
+
+ /* Configure PIO1.8 as Timer1_16 CAP0 */
+ // IOCON_PIO1_8 &= ~IOCON_PIO1_8_FUNC_MASK;
+ // IOCON_PIO1_8 |= IOCON_PIO1_8_FUNC_CT16B1_CAP0;
+
+ /* Configure PIO1.9 as Timer1_16 MAT0 */
+ // IOCON_PIO1_9 &= ~IOCON_PIO1_9_FUNC_MASK;
+ // IOCON_PIO1_9 |= IOCON_PIO1_9_FUNC_CT16B1_MAT0;
+
+ /* Configure PIO1.10 as Timer1_16 MAT1 */
+ // IOCON_PIO1_10 &= ~IOCON_PIO1_10_FUNC_MASK;
+ // IOCON_PIO1_10 |= IOCON_PIO1_10_FUNC_CT16B1_MAT1;
+
+ timer16_1_counter = 0;
+ TMR_TMR16B1MR0 = timerInterval;
+
+ /* Configure match control register to raise an interrupt and reset on MR0 */
+ TMR_TMR16B1MCR = (TMR_TMR16B1MCR_MR0_INT_ENABLED | TMR_TMR16B1MCR_MR0_RESET_ENABLED);
+
+ /* Enable the TIMER1 Interrupt */
+ NVIC_EnableIRQ(TIMER_16_1_IRQn);
+ }
+ return;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file timer16.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef __TIMER16_H__
+#define __TIMER16_H__
+
+#include "projectconfig.h"
+
+#define TIMER16_DEFAULTINTERVAL (0xFFFF) // ~0.91mS @ 72MHz, ~1.37mS @ 48MHz
+
+#define TIMER16_CCLK_100US ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / 10000)
+#define TIMER16_CCLK_1MS ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / 1000)
+
+void TIMER16_0_IRQHandler(void);
+void TIMER16_1_IRQHandler(void);
+
+void timer16DelayTicks(uint8_t timerNum, uint16_t delayInTicks);
+void timer16DelayUS(uint8_t timerNum, uint16_t delayInUS);
+void timer16Enable(uint8_t timerNum);
+void timer16Disable(uint8_t timerNum);
+void timer16Reset(uint8_t timerNum);
+void timer16Init(uint8_t timerNum, uint16_t timerInterval);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file timer32.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Generic code for 32-bit timers. By default, the timers are configured
+ to generate an interrupt once every 100 microseconds, incrementing a
+ global variable once per tick.
+
+ @warning Please note that the ROM-based USB drivers on the LPC1343
+ require the use of 32-bit Timer 1. If you plan on using the
+ ROM-based USB functionality, you should restrict your timer
+ usage to 32-bit timer 0.
+
+ @section Example
+
+ @code
+ #include "/core/cpu/cpu.h"
+ #include "/core/timer32/timer32.h"
+ ...
+ cpuInit();
+
+ // Initialise 32-bit timer 0 with 100uS ticks
+ timer32Init(0, TIMER32_DEFAULTINTERVAL);
+
+ // Enable timer 0
+ timer32Enable(0);
+
+ // Cause a blocking delay for 1 second (1000mS)
+ timer32Delay(0, TIMER32_DELAY_1MS * 1000);
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "timer32.h"
+
+volatile uint32_t timer32_0_counter = 0;
+volatile uint32_t timer32_1_counter = 0;
+
+/**************************************************************************/
+/*!
+ @brief Causes a blocking delay for the specified number of
+ timer ticks. The duration of each 'tick' is determined by
+ the 'timerInterval' property supplied to timer32Init.
+
+ @param[in] timerNum
+ The 32-bit timer to user (0..1)
+ @param[in] delay
+ The number of counter increments to wait
+*/
+/**************************************************************************/
+void timer32Delay(uint8_t timerNum, uint32_t delay)
+{
+ uint32_t curTicks;
+
+ if (timerNum == 0)
+ {
+ curTicks = timer32_0_counter;
+ if (curTicks > 0xFFFFFFFF - delay)
+ {
+ // Rollover will occur during delay
+ while (timer32_0_counter >= curTicks)
+ {
+ while (timer32_0_counter < (delay - (0xFFFFFFFF - curTicks)));
+ }
+ }
+ else
+ {
+ while ((timer32_0_counter - curTicks) < delay);
+ }
+ }
+
+ else if (timerNum == 1)
+ {
+ curTicks = timer32_1_counter;
+ if (curTicks > 0xFFFFFFFF - delay)
+ {
+ // Rollover will occur during delay
+ while (timer32_1_counter >= curTicks)
+ {
+ while (timer32_1_counter < (delay - (0xFFFFFFFF - curTicks)));
+ }
+ }
+ else
+ {
+ while ((timer32_1_counter - curTicks) < delay);
+ }
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Interrupt handler for 32-bit timer 0
+*/
+/**************************************************************************/
+void TIMER32_0_IRQHandler(void)
+{
+ /* Clear the interrupt flag */
+ TMR_TMR32B0IR = TMR_TMR32B0IR_MR0;
+
+ /* If you wish to perform some action after each timer 'tick' (such as
+ incrementing a counter variable) you can do so here */
+ timer32_0_counter++;
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Interrupt handler for 32-bit timer 1
+*/
+/**************************************************************************/
+void TIMER32_1_IRQHandler(void)
+{
+ /* Clear the interrupt flag */
+ TMR_TMR32B1IR = TMR_TMR32B1IR_MR0;
+
+ /* If you wish to perform some action after each timer 'tick' (such as
+ incrementing a counter variable) you can do so here */
+ timer32_1_counter++;
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Enables the specified timer
+
+ @param[in] timerNum
+ The 32-bit timer to enable (0..1)
+*/
+/**************************************************************************/
+void timer32Enable(uint8_t timerNum)
+{
+ if ( timerNum == 0 )
+ {
+ TMR_TMR32B0TCR = TMR_TMR32B0TCR_COUNTERENABLE_ENABLED;
+ }
+
+ else if (timerNum == 1)
+ {
+ TMR_TMR32B1TCR = TMR_TMR32B1TCR_COUNTERENABLE_ENABLED;
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Disables the specified timer
+
+ @param[in] timerNum
+ The 32-bit timer to disable (0..1)
+*/
+/**************************************************************************/
+void timer32Disable(uint8_t timerNum)
+{
+ if ( timerNum == 0 )
+ {
+ TMR_TMR32B0TCR = TMR_TMR32B0TCR_COUNTERENABLE_DISABLED;
+ }
+
+ else if (timerNum == 1)
+ {
+ TMR_TMR32B1TCR = TMR_TMR32B1TCR_COUNTERENABLE_DISABLED;
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Resets the specified timer
+
+ @param[in] timerNum
+ The 32-bit timer to reset (0..1)
+*/
+/**************************************************************************/
+void timer32Reset(uint8_t timerNum)
+{
+ uint32_t regVal;
+
+ if ( timerNum == 0 )
+ {
+ regVal = TMR_TMR32B0TCR;
+ regVal |= TMR_TMR32B0TCR_COUNTERRESET_ENABLED;
+ TMR_TMR32B0TCR = regVal;
+ }
+
+ else if (timerNum == 1)
+ {
+ regVal = TMR_TMR32B1TCR;
+ regVal |= TMR_TMR32B1TCR_COUNTERRESET_ENABLED;
+ TMR_TMR32B1TCR = regVal;
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the specified 32-bit timer, and configures the
+ timer to raise an interrupt and reset on match on MR0.
+
+ @param[in] timerNum
+ The 32-bit timer to initiliase (0..1)
+ @param[in] timerInterval
+ The number of clock 'ticks' between resets (0..0xFFFFFFFF)
+
+ @note Care needs to be taken when configuring the timers since the
+ pins are all multiplexed with other peripherals. This code is
+ provided as a starting point, but it will need to be adjusted
+ according to your own situation and pin/peripheral requirements
+*/
+/**************************************************************************/
+void timer32Init(uint8_t timerNum, uint32_t timerInterval)
+{
+ // If timerInterval is invalid, use the default value
+ if (timerInterval < 1)
+ {
+ timerInterval = TIMER32_DEFAULTINTERVAL;
+ }
+
+ if ( timerNum == 0 )
+ {
+ /* Enable the clock for CT32B0 */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT32B0);
+
+ /* The physical pins associated with CT32B0 are not enabled by
+ default in order to avoid conflicts with other peripherals. If
+ you wish to use any of the pin-dependant functionality, simply
+ uncomment the appropriate lines below. */
+
+ /* Configure PIO1.5 as Timer0_32 CAP0 */
+ // IOCON_PIO1_5 &= ~IOCON_PIO1_5_FUNC_MASK;
+ // IOCON_PIO1_5 |= IOCON_PIO1_5_FUNC_CT32B0_CAP0;
+
+ /* Configure PIO1.6 as Timer0_32 MAT0 */
+ // IOCON_PIO1_6 &= ~IOCON_PIO1_6_FUNC_MASK;
+ // IOCON_PIO1_6 |= IOCON_PIO1_6_FUNC_CT32B0_MAT0;
+
+ /* Configure PIO1.7 as Timer0_32 MAT1 */
+ // IOCON_PIO1_7 &= ~IOCON_PIO1_7_FUNC_MASK;
+ // IOCON_PIO1_7 |= IOCON_PIO1_7_FUNC_CT32B0_MAT1;
+
+ /* Configure PIO0.1 as Timer0_32 MAT2 */
+ // IOCON_PIO0_1 &= ~IOCON_PIO0_1_FUNC_MASK;
+ // IOCON_PIO0_1 |= IOCON_PIO0_1_FUNC_CT32B0_MAT2;
+
+ /* Configure PIO0.11 as Timer0_32 MAT3 */
+ /* Note: This pint can not be used with JTAG/SWD */
+ // IOCON_JTAG_TDI_PIO0_11 &= ~IOCON_JTAG_TDI_PIO0_11_FUNC_MASK;
+ // IOCON_JTAG_TDI_PIO0_11 |= IOCON_JTAG_TDI_PIO0_11_FUNC_CT32B0_MAT3;
+
+ timer32_0_counter = 0;
+ TMR_TMR32B0MR0 = timerInterval;
+
+ /* Configure match control register to raise an interrupt and reset on MR0 */
+ TMR_TMR32B0MCR = (TMR_TMR32B0MCR_MR0_INT_ENABLED | TMR_TMR32B0MCR_MR0_RESET_ENABLED);
+
+ /* Enable the TIMER0 interrupt */
+ NVIC_EnableIRQ(TIMER_32_0_IRQn);
+ }
+
+ else if ( timerNum == 1 )
+ {
+ /* Enable the clock for CT32B1 */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT32B1);
+
+ /* The physical pins associated with CT32B0 are not enabled by
+ default in order to avoid conflicts with other peripherals. */
+
+ /* Configure PIO1.0 as Timer1_32 CAP0 */
+ /* Note: This pint can not be used with JTAG/SWD */
+ // IOCON_JTAG_TMS_PIO1_0 &= ~IOCON_JTAG_TMS_PIO1_0_FUNC_MASK;
+ // IOCON_JTAG_TMS_PIO1_0 |= IOCON_JTAG_TMS_PIO1_0_FUNC_CT32B1_CAP0;
+
+ /* Configure PIO1.1 as Timer1_32 MAT0 */
+ /* Note: This pint can not be used with JTAG/SWD */
+ // IOCON_JTAG_TDO_PIO1_1 &= ~IOCON_JTAG_TDO_PIO1_1_FUNC_MASK;
+ // IOCON_JTAG_TDO_PIO1_1 |= IOCON_JTAG_TDO_PIO1_1_FUNC_CT32B1_MAT0;
+
+ /* Configure PIO1.2 as Timer1_32 MAT1 */
+ /* Note: This pint can not be used with JTAG/SWD */
+ // IOCON_JTAG_nTRST_PIO1_2 &= ~IOCON_JTAG_nTRST_PIO1_2_FUNC_MASK;
+ // IOCON_JTAG_nTRST_PIO1_2 |= IOCON_JTAG_nTRST_PIO1_2_FUNC_CT32B1_MAT1;
+
+ /* Configure PIO1.3 as Timer1_32 MAT2 */
+ /* Note: This pint can not be used with JTAG/SWD */
+ // IOCON_SWDIO_PIO1_3 &= ~IOCON_SWDIO_PIO1_3_FUNC_MASK;
+ // IOCON_SWDIO_PIO1_3 |= IOCON_SWDIO_PIO1_3_FUNC_CT32B1_MAT2;
+
+ /* Configure PIO1.4 as Timer1_32 MAT3 */
+ // IOCON_PIO1_4 &= ~IOCON_PIO1_4_FUNC_MASK;
+ // IOCON_PIO1_4 |= IOCON_PIO1_4_FUNC_CT32B1_MAT3;
+
+ timer32_1_counter = 0;
+ TMR_TMR32B1MR0 = timerInterval;
+
+ /* Configure match control register to raise an interrupt and reset on MR0 */
+ TMR_TMR32B1MCR = (TMR_TMR32B1MCR_MR0_INT_ENABLED | TMR_TMR32B1MCR_MR0_RESET_ENABLED);
+
+ /* Enable the TIMER1 Interrupt */
+ NVIC_EnableIRQ(TIMER_32_1_IRQn);
+ }
+ return;
+}
+
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file timer32.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef __TIMER32_H__
+#define __TIMER32_H__
+
+#include "projectconfig.h"
+
+#define TIMER32_CCLK_1US ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / 1000000)
+#define TIMER32_CCLK_10US ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / 100000)
+#define TIMER32_CCLK_100US ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / 10000)
+#define TIMER32_CCLK_1MS ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / 1000)
+#define TIMER32_CCLK_10MS ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / 100)
+#define TIMER32_CCLK_100MS ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / 10)
+#define TIMER32_CCLK_1S (CFG_CPU_CCLK/SCB_SYSAHBCLKDIV)
+#define TIMER32_DEFAULTINTERVAL (TIMER32_CCLK_100US)
+
+#define TIMER32_DELAY_100US (1) // 100uS delay = 1 tick
+#define TIMER32_DELAY_1MS (10) // 1mS delay = 10 ticks
+#define TIMER32_DELAY_1S (10000) // 1S delay = 10000 ticks
+
+void TIMER32_0_IRQHandler(void);
+void TIMER32_1_IRQHandler(void);
+
+void timer32Delay(uint8_t timerNum, uint32_t delay);
+void timer32Enable(uint8_t timerNum);
+void timer32Disable(uint8_t timerNum);
+void timer32Reset(uint8_t timerNum);
+void timer32Init(uint8_t timerNum, uint32_t timerInterval);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file uart.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Generic code for UART-based communication. Incoming text is stored
+ in a FIFO Queue for safer processing.
+
+ @section Example: Sending text via UART
+
+ @code
+ #include "core/cpu/cpu.h"
+ #include "core/uart/uart.h"
+ ...
+ #define UARTBUFFERSIZE 5
+ ...
+ cpuInit();
+ uartInit(57600);
+ ...
+ uint8_t uartBuffer[UARTBUFFERSIZE] = { 'T', 'e', 's', 't', '\n' };
+
+ // Send contents of uartBuffer
+ uartSend((uint8_t *)uartBuffer, UARTBUFFERSIZE);
+ @endcode
+
+ @section Example: Reading from UART
+
+ @code
+
+ #include "core/cpu/cpu.h"
+ #include "core/uart/uart.h"
+
+ cpuInit();
+ uartInit(57600);
+
+ // Get a reference to the UART control block
+ uart_pcb_t *pcb = uartGetPCB();
+
+ // Read any text available in the queue
+ while (uartRxBufferDataPending())
+ {
+ // Read the first available character
+ uint8_t c = uartRxBufferRead();
+
+ // read out the data in the buffer and echo it back to the host.
+ switch (c)
+ {
+ case '\r':
+ printf("\n\r");
+ break;
+ default:
+ printf("%c", c);
+ break;
+ }
+ }
+
+ #endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include <string.h>
+
+#include "uart.h"
+
+#ifdef CFG_INTERFACE_UART
+ #include "core/cmd/cmd.h"
+#endif
+
+/**************************************************************************/
+/*!
+ UART protocol control block, which is used to safely access the
+ RX FIFO buffer from elsewhere in the code. This should be accessed
+ through 'uartGetPCB()'.
+*/
+/**************************************************************************/
+static uart_pcb_t pcb;
+
+/**************************************************************************/
+/*!
+ IRQ to handle incoming data, etc.
+*/
+/**************************************************************************/
+void UART_IRQHandler(void)
+{
+ uint8_t IIRValue, LSRValue;
+ uint8_t Dummy = Dummy;
+
+ IIRValue = UART_U0IIR;
+ IIRValue &= ~(UART_U0IIR_IntStatus_MASK); /* skip pending bit in IIR */
+ IIRValue &= UART_U0IIR_IntId_MASK; /* check bit 1~3, interrupt identification */
+
+ // 1.) Check receiver line status
+ if (IIRValue == UART_U0IIR_IntId_RLS)
+ {
+ LSRValue = UART_U0LSR;
+ // Check for errors
+ if (LSRValue & (UART_U0LSR_OE | UART_U0LSR_PE | UART_U0LSR_FE | UART_U0LSR_RXFE | UART_U0LSR_BI))
+ {
+ /* There are errors or break interrupt */
+ /* Read LSR will clear the interrupt */
+ pcb.status = LSRValue;
+ Dummy = UART_U0RBR; /* Dummy read on RX to clear interrupt, then bail out */
+ return;
+ }
+ // No error and receive data is ready
+ if (LSRValue & UART_U0LSR_RDR_DATA)
+ {
+ /* If no error on RLS, normal ready, save into the data buffer. */
+ /* Note: read RBR will clear the interrupt */
+ uartRxBufferWrite(UART_U0RBR);
+ }
+ }
+
+ // 2.) Check receive data available
+ else if (IIRValue == UART_U0IIR_IntId_RDA)
+ {
+ // Add incoming text to UART buffer
+ uartRxBufferWrite(UART_U0RBR);
+ }
+
+ // 3.) Check character timeout indicator
+ else if (IIRValue == UART_U0IIR_IntId_CTI)
+ {
+ /* Bit 9 as the CTI error */
+ pcb.status |= 0x100;
+ }
+
+ // 4.) Check THRE (transmit holding register empty)
+ else if (IIRValue == UART_U0IIR_IntId_THRE)
+ {
+ /* Check status in the LSR to see if valid data in U0THR or not */
+ LSRValue = UART_U0LSR;
+ if (LSRValue & UART_U0LSR_THRE)
+ {
+ pcb.pending_tx_data = 0;
+ }
+ else
+ {
+ pcb.pending_tx_data= 1;
+ }
+ }
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Get a pointer to the UART's protocol control block, which can
+ be used to control the RX FIFO buffer and check whether UART
+ has already been initialised or not.
+
+ @section Example
+
+ @code
+ // Make sure that UART is initialised
+ uart_pcb_t *pcb = uartGetPCB();
+ if (!pcb->initialised)
+ {
+ uartInit(CFG_UART_BAUDRATE);
+ }
+ @endcode
+
+*/
+/**************************************************************************/
+uart_pcb_t *uartGetPCB()
+{
+ return &pcb;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises UART at the specified baud rate.
+
+ @param[in] baudRate
+ The baud rate to use when configuring the UART.
+*/
+/**************************************************************************/
+void uartInit(uint32_t baudrate)
+{
+ uint32_t fDiv;
+ uint32_t regVal;
+
+ NVIC_DisableIRQ(UART_IRQn);
+
+ // Clear protocol control blocks
+ memset(&pcb, 0, sizeof(uart_pcb_t));
+ pcb.pending_tx_data = 0;
+ uartRxBufferInit();
+
+ /* Set 1.6 UART RXD */
+ IOCON_PIO1_6 &= ~IOCON_PIO1_6_FUNC_MASK;
+ IOCON_PIO1_6 |= IOCON_PIO1_6_FUNC_UART_RXD;
+
+ /* Set 1.7 UART TXD */
+ IOCON_PIO1_7 &= ~IOCON_PIO1_7_FUNC_MASK;
+ IOCON_PIO1_7 |= IOCON_PIO1_7_FUNC_UART_TXD;
+
+ /* Enable UART clock */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_UART);
+ SCB_UARTCLKDIV = SCB_UARTCLKDIV_DIV1; /* divided by 1 */
+
+ /* 8 bits, no Parity, 1 Stop bit */
+ UART_U0LCR = (UART_U0LCR_Word_Length_Select_8Chars |
+ UART_U0LCR_Stop_Bit_Select_1Bits |
+ UART_U0LCR_Parity_Disabled |
+ UART_U0LCR_Parity_Select_OddParity |
+ UART_U0LCR_Break_Control_Disabled |
+ UART_U0LCR_Divisor_Latch_Access_Enabled);
+
+ /* Baud rate */
+ regVal = SCB_UARTCLKDIV;
+ fDiv = (((CFG_CPU_CCLK * SCB_SYSAHBCLKDIV)/regVal)/16)/baudrate;
+
+ UART_U0DLM = fDiv / 256;
+ UART_U0DLL = fDiv % 256;
+
+ /* Set DLAB back to 0 */
+ UART_U0LCR = (UART_U0LCR_Word_Length_Select_8Chars |
+ UART_U0LCR_Stop_Bit_Select_1Bits |
+ UART_U0LCR_Parity_Disabled |
+ UART_U0LCR_Parity_Select_OddParity |
+ UART_U0LCR_Break_Control_Disabled |
+ UART_U0LCR_Divisor_Latch_Access_Disabled);
+
+ /* Enable and reset TX and RX FIFO. */
+ UART_U0FCR = (UART_U0FCR_FIFO_Enabled |
+ UART_U0FCR_Rx_FIFO_Reset |
+ UART_U0FCR_Tx_FIFO_Reset);
+
+ /* Read to clear the line status. */
+ regVal = UART_U0LSR;
+
+ /* Ensure a clean start, no data in either TX or RX FIFO. */
+ while (( UART_U0LSR & (UART_U0LSR_THRE|UART_U0LSR_TEMT)) != (UART_U0LSR_THRE|UART_U0LSR_TEMT) );
+ while ( UART_U0LSR & UART_U0LSR_RDR_DATA )
+ {
+ /* Dump data from RX FIFO */
+ regVal = UART_U0RBR;
+ }
+
+ /* Set the initialised flag in the protocol control block */
+ pcb.initialised = 1;
+ pcb.baudrate = baudrate;
+
+ /* Enable the UART Interrupt */
+ NVIC_EnableIRQ(UART_IRQn);
+ UART_U0IER = UART_U0IER_RBR_Interrupt_Enabled | UART_U0IER_RLS_Interrupt_Enabled;
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends the contents of supplied text buffer over UART.
+
+ @param[in] bufferPtr
+ Pointer to the text buffer
+ @param[in] bufferPtr
+ The size of the text buffer
+
+ @section Example
+
+ @code
+ // Set 5-character text buffer
+ uint8_t uartBuffer[5] = { 'T', 'e', 's', 't', '\n' };
+ // Send contents of uartBuffer
+ uartSend((uint8_t *)uartBuffer, 5);
+ @endcode
+
+*/
+/**************************************************************************/
+void uartSend (uint8_t *bufferPtr, uint32_t length)
+{
+ while (length != 0)
+ {
+ /* THRE status, contain valid data */
+ while ( !(UART_U0LSR & UART_U0LSR_THRE) );
+ UART_U0THR = *bufferPtr;
+
+ bufferPtr++;
+ length--;
+ }
+
+ return;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends a single byte over UART.
+
+ @param[in] byte
+ Byte value to send
+
+ @section Example
+
+ @code
+ // Send 0xFF over UART
+ uartSendByte(0xFF);
+ // Send 'B' over UART (note single quotes)
+ uartSendByte('B');
+ @endcode
+
+*/
+/**************************************************************************/
+void uartSendByte (uint8_t byte)
+{
+ /* THRE status, contain valid data */
+ while ( !(UART_U0LSR & UART_U0LSR_THRE) );
+ UART_U0THR = byte;
+
+ return;
+}
+
+
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file uart.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef __UART_H__
+#define __UART_H__
+
+#include "projectconfig.h"
+
+// Buffer used for circular fifo
+typedef struct _uart_buffer_t
+{
+ uint8_t ep_dir;
+ volatile uint8_t len;
+ volatile uint8_t wr_ptr;
+ volatile uint8_t rd_ptr;
+ uint8_t buf[CFG_UART_BUFSIZE];
+} uart_buffer_t;
+
+// UART Protocol control block
+typedef struct _uart_pcb_t
+{
+ BOOL initialised;
+ uint32_t baudrate;
+ uint32_t status;
+ uint32_t pending_tx_data;
+ uart_buffer_t rxfifo;
+} uart_pcb_t;
+
+void UART_IRQHandler(void);
+uart_pcb_t *uartGetPCB();
+void uartInit(uint32_t Baudrate);
+void uartSend(uint8_t *BufferPtr, uint32_t Length);
+void uartSendByte (uint8_t byte);
+
+// Rx Buffer access control
+void uartRxBufferInit();
+uint8_t uartRxBufferRead();
+void uartRxBufferWrite(uint8_t data);
+void uartRxBufferClearFIFO();
+uint8_t uartRxBufferDataPending();
+bool uartRxBufferReadArray(byte_t* rx, size_t* len);
+
+#endif
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+*******************************************************************/
+
+/**************************************************************************/
+/*!
+ @file uart_buf.c
+ @author Christopher Wang (Freaklabs)
+ Modified by: K. Townsend (microBuilder.eu)
+ @date 19 May 2010
+
+ Original code taken from the FreakUSB Open Source USB Device Stack
+ http://freaklabs.org/index.php/FreakUSB-Open-Source-USB-Device-Stack.html
+
+ If it works well, you can thank Akiba at Freaklabs. If it fails
+ miserably, you can blame me (since parts of it it were rather
+ ungraciously modified). :-)
+
+*/
+/**************************************************************************/
+
+#include "uart.h"
+
+/**************************************************************************/
+/*!
+ Initialises the RX FIFO buffer
+*/
+/**************************************************************************/
+void uartRxBufferInit()
+{
+ uart_pcb_t *pcb = uartGetPCB();
+ pcb->rxfifo.len = 0;
+}
+
+/**************************************************************************/
+/*!
+ Read one byte out of the RX buffer. This function will return the byte
+ located at the array index of the read pointer, and then increment the
+ read pointer index. If the read pointer exceeds the maximum buffer
+ size, it will roll over to zero.
+*/
+/**************************************************************************/
+uint8_t uartRxBufferRead()
+{
+ uart_pcb_t *pcb = uartGetPCB();
+ uint8_t data;
+
+ data = pcb->rxfifo.buf[pcb->rxfifo.rd_ptr];
+ pcb->rxfifo.rd_ptr = (pcb->rxfifo.rd_ptr + 1) % CFG_UART_BUFSIZE;
+ pcb->rxfifo.len--;
+ return data;
+}
+
+/**************************************************************************/
+/*!
+ Read byte array from uart
+ */
+/**************************************************************************/
+bool uartRxBufferReadArray(byte_t* rx, size_t* len)
+{
+ uart_pcb_t *pcb = uartGetPCB();
+ *len = 0;
+
+ while(pcb->rxfifo.len != 0)
+ {
+ (*rx) = uartRxBufferRead();
+ (*len)++;
+ rx++;
+ }
+
+ return (*len != 0);
+}
+
+/**************************************************************************/
+/*!
+ Write one byte into the RX buffer. This function will write one
+ byte into the array index specified by the write pointer and increment
+ the write index. If the write index exceeds the max buffer size, then it
+ will roll over to zero.
+*/
+/**************************************************************************/
+void uartRxBufferWrite(uint8_t data)
+{
+ uart_pcb_t *pcb = uartGetPCB();
+
+ pcb->rxfifo.buf[pcb->rxfifo.wr_ptr] = data;
+ pcb->rxfifo.wr_ptr = (pcb->rxfifo.wr_ptr + 1) % CFG_UART_BUFSIZE;
+ pcb->rxfifo.len++;
+}
+
+/**************************************************************************/
+/*!
+ Clear the fifo read and write pointers and set the length to zero.
+*/
+/**************************************************************************/
+void uartRxBufferClearFIFO()
+{
+ uart_pcb_t *pcb = uartGetPCB();
+
+ pcb->rxfifo.rd_ptr = 0;
+ pcb->rxfifo.wr_ptr = 0;
+ pcb->rxfifo.len = 0;
+}
+
+/**************************************************************************/
+/*!
+ Check whether there is any data pending on the RX buffer.
+*/
+/**************************************************************************/
+uint8_t uartRxBufferDataPending()
+{
+ uart_pcb_t *pcb = uartGetPCB();
+
+ if (pcb->rxfifo.len != 0)
+ {
+ return 1;
+ }
+
+ return 0;
+}
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: CDC.h
+ * Purpose: USB Communication Device Class Definitions
+ * Version: V1.00
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __CDC_H
+#define __CDC_H
+
+/*----------------------------------------------------------------------------
+ * Definitions based on usbcdc11.pdf (www.usb.org)
+ *---------------------------------------------------------------------------*/
+// Communication device class specification version 1.10
+#define CDC_V1_10 0x0110
+
+// Communication interface class code
+// (usbcdc11.pdf, 4.2, Table 15)
+#define CDC_COMMUNICATION_INTERFACE_CLASS 0x02
+
+// Communication interface class subclass codes
+// (usbcdc11.pdf, 4.3, Table 16)
+#define CDC_DIRECT_LINE_CONTROL_MODEL 0x01
+#define CDC_ABSTRACT_CONTROL_MODEL 0x02
+#define CDC_TELEPHONE_CONTROL_MODEL 0x03
+#define CDC_MULTI_CHANNEL_CONTROL_MODEL 0x04
+#define CDC_CAPI_CONTROL_MODEL 0x05
+#define CDC_ETHERNET_NETWORKING_CONTROL_MODEL 0x06
+#define CDC_ATM_NETWORKING_CONTROL_MODEL 0x07
+
+// Communication interface class control protocol codes
+// (usbcdc11.pdf, 4.4, Table 17)
+#define CDC_PROTOCOL_COMMON_AT_COMMANDS 0x01
+
+// Data interface class code
+// (usbcdc11.pdf, 4.5, Table 18)
+#define CDC_DATA_INTERFACE_CLASS 0x0A
+
+// Data interface class protocol codes
+// (usbcdc11.pdf, 4.7, Table 19)
+#define CDC_PROTOCOL_ISDN_BRI 0x30
+#define CDC_PROTOCOL_HDLC 0x31
+#define CDC_PROTOCOL_TRANSPARENT 0x32
+#define CDC_PROTOCOL_Q921_MANAGEMENT 0x50
+#define CDC_PROTOCOL_Q921_DATA_LINK 0x51
+#define CDC_PROTOCOL_Q921_MULTIPLEXOR 0x52
+#define CDC_PROTOCOL_V42 0x90
+#define CDC_PROTOCOL_EURO_ISDN 0x91
+#define CDC_PROTOCOL_V24_RATE_ADAPTATION 0x92
+#define CDC_PROTOCOL_CAPI 0x93
+#define CDC_PROTOCOL_HOST_BASED_DRIVER 0xFD
+#define CDC_PROTOCOL_DESCRIBED_IN_PUFD 0xFE
+
+// Type values for bDescriptorType field of functional descriptors
+// (usbcdc11.pdf, 5.2.3, Table 24)
+#define CDC_CS_INTERFACE 0x24
+#define CDC_CS_ENDPOINT 0x25
+
+// Type values for bDescriptorSubtype field of functional descriptors
+// (usbcdc11.pdf, 5.2.3, Table 25)
+#define CDC_HEADER 0x00
+#define CDC_CALL_MANAGEMENT 0x01
+#define CDC_ABSTRACT_CONTROL_MANAGEMENT 0x02
+#define CDC_DIRECT_LINE_MANAGEMENT 0x03
+#define CDC_TELEPHONE_RINGER 0x04
+#define CDC_REPORTING_CAPABILITIES 0x05
+#define CDC_UNION 0x06
+#define CDC_COUNTRY_SELECTION 0x07
+#define CDC_TELEPHONE_OPERATIONAL_MODES 0x08
+#define CDC_USB_TERMINAL 0x09
+#define CDC_NETWORK_CHANNEL 0x0A
+#define CDC_PROTOCOL_UNIT 0x0B
+#define CDC_EXTENSION_UNIT 0x0C
+#define CDC_MULTI_CHANNEL_MANAGEMENT 0x0D
+#define CDC_CAPI_CONTROL_MANAGEMENT 0x0E
+#define CDC_ETHERNET_NETWORKING 0x0F
+#define CDC_ATM_NETWORKING 0x10
+
+// CDC class-specific request codes
+// (usbcdc11.pdf, 6.2, Table 46)
+// see Table 45 for info about the specific requests.
+#define CDC_SEND_ENCAPSULATED_COMMAND 0x00
+#define CDC_GET_ENCAPSULATED_RESPONSE 0x01
+#define CDC_SET_COMM_FEATURE 0x02
+#define CDC_GET_COMM_FEATURE 0x03
+#define CDC_CLEAR_COMM_FEATURE 0x04
+#define CDC_SET_AUX_LINE_STATE 0x10
+#define CDC_SET_HOOK_STATE 0x11
+#define CDC_PULSE_SETUP 0x12
+#define CDC_SEND_PULSE 0x13
+#define CDC_SET_PULSE_TIME 0x14
+#define CDC_RING_AUX_JACK 0x15
+#define CDC_SET_LINE_CODING 0x20
+#define CDC_GET_LINE_CODING 0x21
+#define CDC_SET_CONTROL_LINE_STATE 0x22
+#define CDC_SEND_BREAK 0x23
+#define CDC_SET_RINGER_PARMS 0x30
+#define CDC_GET_RINGER_PARMS 0x31
+#define CDC_SET_OPERATION_PARMS 0x32
+#define CDC_GET_OPERATION_PARMS 0x33
+#define CDC_SET_LINE_PARMS 0x34
+#define CDC_GET_LINE_PARMS 0x35
+#define CDC_DIAL_DIGITS 0x36
+#define CDC_SET_UNIT_PARAMETER 0x37
+#define CDC_GET_UNIT_PARAMETER 0x38
+#define CDC_CLEAR_UNIT_PARAMETER 0x39
+#define CDC_GET_PROFILE 0x3A
+#define CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40
+#define CDC_SET_ETHERNET_PMP_FILTER 0x41
+#define CDC_GET_ETHERNET_PMP_FILTER 0x42
+#define CDC_SET_ETHERNET_PACKET_FILTER 0x43
+#define CDC_GET_ETHERNET_STATISTIC 0x44
+#define CDC_SET_ATM_DATA_FORMAT 0x50
+#define CDC_GET_ATM_DEVICE_STATISTICS 0x51
+#define CDC_SET_ATM_DEFAULT_VC 0x52
+#define CDC_GET_ATM_VC_STATISTICS 0x53
+
+// Communication feature selector codes
+// (usbcdc11.pdf, 6.2.2..6.2.4, Table 47)
+#define CDC_ABSTRACT_STATE 0x01
+#define CDC_COUNTRY_SETTING 0x02
+
+// Feature Status returned for ABSTRACT_STATE Selector
+// (usbcdc11.pdf, 6.2.3, Table 48)
+#define CDC_IDLE_SETTING (1 << 0)
+#define CDC_DATA_MULTPLEXED_STATE (1 << 1)
+
+
+// Control signal bitmap values for the SetControlLineState request
+// (usbcdc11.pdf, 6.2.14, Table 51)
+#define CDC_DTE_PRESENT (1 << 0)
+#define CDC_ACTIVATE_CARRIER (1 << 1)
+
+// CDC class-specific notification codes
+// (usbcdc11.pdf, 6.3, Table 68)
+// see Table 67 for Info about class-specific notifications
+#define CDC_NOTIFICATION_NETWORK_CONNECTION 0x00
+#define CDC_RESPONSE_AVAILABLE 0x01
+#define CDC_AUX_JACK_HOOK_STATE 0x08
+#define CDC_RING_DETECT 0x09
+#define CDC_NOTIFICATION_SERIAL_STATE 0x20
+#define CDC_CALL_STATE_CHANGE 0x28
+#define CDC_LINE_STATE_CHANGE 0x29
+#define CDC_CONNECTION_SPEED_CHANGE 0x2A
+
+// UART state bitmap values (Serial state notification).
+// (usbcdc11.pdf, 6.3.5, Table 69)
+#define CDC_SERIAL_STATE_OVERRUN (1 << 6) // receive data overrun error has occurred
+#define CDC_SERIAL_STATE_PARITY (1 << 5) // parity error has occurred
+#define CDC_SERIAL_STATE_FRAMING (1 << 4) // framing error has occurred
+#define CDC_SERIAL_STATE_RING (1 << 3) // state of ring signal detection
+#define CDC_SERIAL_STATE_BREAK (1 << 2) // state of break detection
+#define CDC_SERIAL_STATE_TX_CARRIER (1 << 1) // state of transmission carrier
+#define CDC_SERIAL_STATE_RX_CARRIER (1 << 0) // state of receiver carrier
+
+
+/*----------------------------------------------------------------------------
+ * Structures based on usbcdc11.pdf (www.usb.org)
+ *---------------------------------------------------------------------------*/
+
+// Header functional descriptor
+// (usbcdc11.pdf, 5.2.3.1)
+// This header must precede any list of class-specific descriptors.
+typedef struct _CDC_HEADER_DESCRIPTOR{
+ uint8_t bFunctionLength; // size of this descriptor in bytes
+ uint8_t bDescriptorType; // CS_INTERFACE descriptor type
+ uint8_t bDescriptorSubtype; // Header functional descriptor subtype
+ uint16_t bcdCDC; // USB CDC specification release version
+} __attribute__((packed)) CDC_HEADER_DESCRIPTOR;
+
+//Call management functional descriptor
+// (usbcdc11.pdf, 5.2.3.2)
+// Describes the processing of calls for the communication class interface.
+typedef struct _CDC_CALL_MANAGEMENT_DESCRIPTOR {
+ uint8_t bFunctionLength; // size of this descriptor in bytes
+ uint8_t bDescriptorType; // CS_INTERFACE descriptor type
+ uint8_t bDescriptorSubtype; // call management functional descriptor subtype
+ uint8_t bmCapabilities; // capabilities that this configuration supports
+ uint8_t bDataInterface; // interface number of the data class interface used for call management (optional)
+} __attribute__((packed)) CDC_CALL_MANAGEMENT_DESCRIPTOR;
+
+// Abstract control management functional descriptor
+// (usbcdc11.pdf, 5.2.3.3)
+// Describes the command supported by the communication interface class with the Abstract Control Model subclass code.
+typedef struct _CDC_ABSTRACT_CONTROL_MANAGEMENT_DESCRIPTOR {
+ uint8_t bFunctionLength; // size of this descriptor in bytes
+ uint8_t bDescriptorType; // CS_INTERFACE descriptor type
+ uint8_t bDescriptorSubtype; // abstract control management functional descriptor subtype
+ uint8_t bmCapabilities; // capabilities supported by this configuration
+} __attribute__((packed)) CDC_ABSTRACT_CONTROL_MANAGEMENT_DESCRIPTOR;
+
+// Union functional descriptors
+// (usbcdc11.pdf, 5.2.3.8)
+// Describes the relationship between a group of interfaces that can be considered to form a functional unit.
+typedef struct _CDC_UNION_DESCRIPTOR {
+ uint8_t bFunctionLength; // size of this descriptor in bytes
+ uint8_t bDescriptorType; // CS_INTERFACE descriptor type
+ uint8_t bDescriptorSubtype; // union functional descriptor subtype
+ uint8_t bMasterInterface; // interface number designated as master
+} __attribute__((packed)) CDC_UNION_DESCRIPTOR;
+
+// Union functional descriptors with one slave interface
+// (usbcdc11.pdf, 5.2.3.8)
+typedef struct _CDC_UNION_1SLAVE_DESCRIPTOR {
+ CDC_UNION_DESCRIPTOR sUnion; // Union functional descriptor
+ uint8_t bSlaveInterfaces[1]; // Slave interface 0
+} __attribute__((packed)) CDC_UNION_1SLAVE_DESCRIPTOR;
+
+// Line coding structure
+// Format of the data returned when a GetLineCoding request is received
+// (usbcdc11.pdf, 6.2.13)
+typedef struct _CDC_LINE_CODING {
+ uint32_t dwDTERate; // Data terminal rate in bits per second
+ uint8_t bCharFormat; // Number of stop bits
+ uint8_t bParityType; // Parity bit type
+ uint8_t bDataBits; // Number of data bits
+} __attribute__((packed)) CDC_LINE_CODING;
+
+// Notification header
+// Data sent on the notification endpoint must follow this header.
+// see USB_SETUP_PACKET in file usb.h
+typedef USB_SETUP_PACKET CDC_NOTIFICATION_HEADER;
+
+#endif /* __CDC_H */
+
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+*******************************************************************/
+
+/**************************************************************************/
+/*!
+ @file cdc_buf.c
+ @author Christopher Wang (Freaklabs)
+ Modified by: K. Townsend (microBuilder.eu)
+ @date 19 May 2010
+
+ Original code taken from the FreakUSB Open Source USB Device Stack
+ http://freaklabs.org/index.php/FreakUSB-Open-Source-USB-Device-Stack.html
+
+ If it works well, you can thank Akiba at Freaklabs. If it fails
+ miserably, you can blame me (since parts of it it were rather
+ ungraciously modified). :-)
+
+*/
+/**************************************************************************/
+
+#include "cdc_buf.h"
+
+static cdc_buffer_t cdcfifo;
+
+/**************************************************************************/
+/*!
+ Gets a pointer to the fifo buffer
+*/
+/**************************************************************************/
+cdc_buffer_t *cdcGetBuffer()
+{
+ return &cdcfifo;
+}
+
+/**************************************************************************/
+/*!
+ Initialises the RX FIFO buffer
+*/
+/**************************************************************************/
+void cdcBufferInit()
+{
+ cdcfifo.len = 0;
+}
+
+/**************************************************************************/
+/*!
+ Read one byte out of the RX buffer. This function will return the byte
+ located at the array index of the read pointer, and then increment the
+ read pointer index. If the read pointer exceeds the maximum buffer
+ size, it will roll over to zero.
+*/
+/**************************************************************************/
+uint8_t cdcBufferRead()
+{
+ uint8_t data;
+
+ data = cdcfifo.buf[cdcfifo.rd_ptr];
+ cdcfifo.rd_ptr = (cdcfifo.rd_ptr + 1) % CFG_USBCDC_BUFFERSIZE;
+ cdcfifo.len--;
+ return data;
+}
+
+/**************************************************************************/
+/*!
+ Reads x bytes from cdc buffer
+ */
+/**************************************************************************/
+uint32_t cdcBufferReadLen(uint8_t* buf, uint32_t len)
+{
+ uint32_t counter, actual;
+ counter = actual = 0;
+
+ while(counter != len)
+ {
+ // Make sure we don't exceed buffer limits
+ if (cdcfifo.len > 0)
+ {
+ buf[counter] = cdcBufferRead();
+ actual++;
+ counter++;
+ }
+ else
+ {
+ return actual;
+ }
+ }
+
+ return actual;
+}
+
+/**************************************************************************/
+/*!
+ Write one byte into the RX buffer. This function will write one
+ byte into the array index specified by the write pointer and increment
+ the write index. If the write index exceeds the max buffer size, then it
+ will roll over to zero.
+*/
+/**************************************************************************/
+void cdcBufferWrite(uint8_t data)
+{
+ cdcfifo.buf[cdcfifo.wr_ptr] = data;
+ cdcfifo.wr_ptr = (cdcfifo.wr_ptr + 1) % CFG_USBCDC_BUFFERSIZE;
+ cdcfifo.len++;
+}
+
+/**************************************************************************/
+/*!
+ Clear the fifo read and write pointers and set the length to zero.
+*/
+/**************************************************************************/
+void cdcBufferClearFIFO()
+{
+ cdcfifo.rd_ptr = 0;
+ cdcfifo.wr_ptr = 0;
+ cdcfifo.len = 0;
+}
+
+/**************************************************************************/
+/*!
+ Check whether there is any data pending on the RX buffer.
+*/
+/**************************************************************************/
+uint8_t cdcBufferDataPending()
+{
+ if (cdcfifo.len != 0)
+ {
+ return 1;
+ }
+
+ return 0;
+}
--- /dev/null
+/*----------------------------------------------------------------------------
+ * Name: cdc_buf.h
+ * Purpose: usb cdc buffer handling
+ * Version: V1.00
+ *---------------------------------------------------------------------------*/
+
+#ifndef __CDC_BUF_H__
+#define __CDC_BUF_H__
+
+#include "projectconfig.h"
+
+// Buffer used for circular fifo
+typedef struct _cdc_buffer_t
+{
+ volatile uint8_t len;
+ volatile uint8_t wr_ptr;
+ volatile uint8_t rd_ptr;
+ uint8_t buf[CFG_USBCDC_BUFFERSIZE];
+} cdc_buffer_t;
+
+cdc_buffer_t * cdcGetBuffer();
+void cdcBufferInit();
+uint8_t cdcBufferRead();
+uint32_t cdcBufferReadLen(uint8_t* buf, uint32_t len);
+void cdcBufferWrite(uint8_t data);
+void cdcBufferClearFIFO();
+uint8_t cdcBufferDataPending();
+
+#endif
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: cdcuser.c
+ * Purpose: USB Communication Device Class User module
+ * Version: V1.10
+ *----------------------------------------------------------------------------
+* This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#include "projectconfig.h"
+
+#include "usb.h"
+#include "usbhw.h"
+#include "usbcfg.h"
+#include "usbcore.h"
+#include "cdc.h"
+#include "cdcuser.h"
+#include "cdc_buf.h"
+
+// unsigned char BulkBufIn [64]; // Buffer to store USB IN packet
+unsigned char BulkBufOut [64]; // Buffer to store USB OUT packet
+unsigned char NotificationBuf [10];
+
+CDC_LINE_CODING CDC_LineCoding = {CFG_USBCDC_BAUDRATE, 0, 0, 8};
+unsigned short CDC_SerialState = 0x0000;
+unsigned short CDC_DepInEmpty = 1; // Data IN EP is empty
+
+/*----------------------------------------------------------------------------
+ We need a buffer for incoming data on USB port because USB receives
+ much faster than UART transmits
+ *---------------------------------------------------------------------------*/
+/* Buffer masks */
+#define CDC_BUF_SIZE (64) // Output buffer in bytes (power 2)
+ // large enough for file transfer
+#define CDC_BUF_MASK (CDC_BUF_SIZE-1ul)
+
+/* Buffer read / write macros */
+#define CDC_BUF_RESET(cdcBuf) (cdcBuf.rdIdx = cdcBuf.wrIdx = 0)
+#define CDC_BUF_WR(cdcBuf, dataIn) (cdcBuf.data[CDC_BUF_MASK & cdcBuf.wrIdx++] = (dataIn))
+#define CDC_BUF_RD(cdcBuf) (cdcBuf.data[CDC_BUF_MASK & cdcBuf.rdIdx++])
+#define CDC_BUF_EMPTY(cdcBuf) (cdcBuf.rdIdx == cdcBuf.wrIdx)
+#define CDC_BUF_FULL(cdcBuf) (cdcBuf.rdIdx == cdcBuf.wrIdx+1)
+#define CDC_BUF_COUNT(cdcBuf) (CDC_BUF_MASK & (cdcBuf.wrIdx - cdcBuf.rdIdx))
+
+
+// CDC output buffer
+typedef struct __CDC_BUF_T
+{
+ unsigned char data[CDC_BUF_SIZE];
+ volatile unsigned int wrIdx;
+ volatile unsigned int rdIdx;
+} CDC_BUF_T;
+
+CDC_BUF_T CDC_OutBuf; // buffer for all CDC Out data
+
+/*----------------------------------------------------------------------------
+ read data from CDC_OutBuf
+ *---------------------------------------------------------------------------*/
+int CDC_RdOutBuf (char *buffer, const int *length)
+{
+ int bytesToRead, bytesRead;
+
+ /* Read *length bytes, block if *bytes are not avaialable */
+ bytesToRead = *length;
+ bytesToRead = (bytesToRead < (*length)) ? bytesToRead : (*length);
+ bytesRead = bytesToRead;
+
+
+ // ... add code to check for underrun
+
+ while (bytesToRead--) {
+ *buffer++ = CDC_BUF_RD(CDC_OutBuf);
+ }
+ return (bytesRead);
+}
+
+/*----------------------------------------------------------------------------
+ write data to CDC_OutBuf
+ *---------------------------------------------------------------------------*/
+int CDC_WrOutBuf (const char *buffer, int *length)
+{
+ int bytesToWrite, bytesWritten;
+
+ // Write *length bytes
+ bytesToWrite = *length;
+ bytesWritten = bytesToWrite;
+
+
+ // ... add code to check for overwrite
+
+ while (bytesToWrite) {
+ CDC_BUF_WR(CDC_OutBuf, *buffer++); // Copy Data to buffer
+ bytesToWrite--;
+ }
+
+ return (bytesWritten);
+}
+
+/*----------------------------------------------------------------------------
+ check if character(s) are available at CDC_OutBuf
+ *---------------------------------------------------------------------------*/
+int CDC_OutBufAvailChar (int *availChar)
+{
+ *availChar = CDC_BUF_COUNT(CDC_OutBuf);
+
+ return (0);
+}
+/* end Buffer handling */
+
+
+/*----------------------------------------------------------------------------
+ CDC Initialisation
+ Initializes the data structures and serial port
+ Parameters: None
+ Return Value: None
+ *---------------------------------------------------------------------------*/
+void CDC_Init (void)
+{
+ CDC_DepInEmpty = 1;
+ CDC_SerialState = CDC_GetSerialState();
+
+ CDC_BUF_RESET(CDC_OutBuf);
+
+ // Initialise the CDC buffer. This is required to buffer outgoing
+ // data (MCU to PC) since data can only be sent 64 bytes per frame
+ // with at least 1ms between frames. To see how the buffer is used,
+ // see 'puts' in systeminit.c
+ cdcBufferInit();
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC SendEncapsulatedCommand Request Callback
+ Called automatically on CDC SEND_ENCAPSULATED_COMMAND Request
+ Parameters: None (global SetupPacket and EP0Buf)
+ Return Value: TRUE - Success, FALSE - Error
+ *---------------------------------------------------------------------------*/
+uint32_t CDC_SendEncapsulatedCommand (void)
+{
+ return (TRUE);
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC GetEncapsulatedResponse Request Callback
+ Called automatically on CDC Get_ENCAPSULATED_RESPONSE Request
+ Parameters: None (global SetupPacket and EP0Buf)
+ Return Value: TRUE - Success, FALSE - Error
+ *---------------------------------------------------------------------------*/
+uint32_t CDC_GetEncapsulatedResponse (void)
+{
+ /* ... add code to handle request */
+ return (TRUE);
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC SetCommFeature Request Callback
+ Called automatically on CDC Set_COMM_FATURE Request
+ Parameters: FeatureSelector
+ Return Value: TRUE - Success, FALSE - Error
+ *---------------------------------------------------------------------------*/
+uint32_t CDC_SetCommFeature (unsigned short wFeatureSelector)
+{
+ /* ... add code to handle request */
+ return (TRUE);
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC GetCommFeature Request Callback
+ Called automatically on CDC Get_COMM_FATURE Request
+ Parameters: FeatureSelector
+ Return Value: TRUE - Success, FALSE - Error
+ *---------------------------------------------------------------------------*/
+uint32_t CDC_GetCommFeature (unsigned short wFeatureSelector)
+{
+ /* ... add code to handle request */
+ return (TRUE);
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC ClearCommFeature Request Callback
+ Called automatically on CDC CLEAR_COMM_FATURE Request
+ Parameters: FeatureSelector
+ Return Value: TRUE - Success, FALSE - Error
+ *---------------------------------------------------------------------------*/
+uint32_t CDC_ClearCommFeature (unsigned short wFeatureSelector)
+{
+ /* ... add code to handle request */
+ return (TRUE);
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC SetLineCoding Request Callback
+ Called automatically on CDC SET_LINE_CODING Request
+ Parameters: none (global SetupPacket and EP0Buf)
+ Return Value: TRUE - Success, FALSE - Error
+ *---------------------------------------------------------------------------*/
+uint32_t CDC_SetLineCoding (void)
+{
+ CDC_LineCoding.dwDTERate = (EP0Buf[0] << 0)
+ | (EP0Buf[1] << 8)
+ | (EP0Buf[2] << 16)
+ | (EP0Buf[3] << 24);
+ CDC_LineCoding.bCharFormat = EP0Buf[4];
+ CDC_LineCoding.bParityType = EP0Buf[5];
+ CDC_LineCoding.bDataBits = EP0Buf[6];
+
+ return (TRUE);
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC GetLineCoding Request Callback
+ Called automatically on CDC GET_LINE_CODING Request
+ Parameters: None (global SetupPacket and EP0Buf)
+ Return Value: TRUE - Success, FALSE - Error
+ *---------------------------------------------------------------------------*/
+uint32_t CDC_GetLineCoding (void)
+{
+ EP0Buf[0] = (CDC_LineCoding.dwDTERate >> 0) & 0xFF;
+ EP0Buf[1] = (CDC_LineCoding.dwDTERate >> 8) & 0xFF;
+ EP0Buf[2] = (CDC_LineCoding.dwDTERate >> 16) & 0xFF;
+ EP0Buf[3] = (CDC_LineCoding.dwDTERate >> 24) & 0xFF;
+ EP0Buf[4] = CDC_LineCoding.bCharFormat;
+ EP0Buf[5] = CDC_LineCoding.bParityType;
+ EP0Buf[6] = CDC_LineCoding.bDataBits;
+
+ return (TRUE);
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC SetControlLineState Request Callback
+ Called automatically on CDC SET_CONTROL_LINE_STATE Request
+ Parameters: ControlSignalBitmap
+ Return Value: TRUE - Success, FALSE - Error
+ *---------------------------------------------------------------------------*/
+uint32_t CDC_SetControlLineState (unsigned short wControlSignalBitmap) {
+
+ /* ... add code to handle request */
+ return (TRUE);
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC SendBreak Request Callback
+ Called automatically on CDC Set_COMM_FATURE Request
+ Parameters: 0xFFFF start of Break
+ 0x0000 stop of Break
+ 0x#### Duration of Break
+ Return Value: TRUE - Success, FALSE - Error
+ *---------------------------------------------------------------------------*/
+uint32_t CDC_SendBreak (unsigned short wDurationOfBreak) {
+
+ /* ... add code to handle request */
+ return (TRUE);
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC_BulkIn call on DataIn Request
+ Parameters: none
+ Return Value: none
+ *---------------------------------------------------------------------------*/
+void CDC_BulkIn(void)
+{
+// int numBytesRead, numBytesAvail;
+//
+// // ToDo: Modify BulkIn to send incoming data to USB
+//
+// ser_AvailChar (&numBytesAvail);
+//
+// // ... add code to check for overwrite
+//
+// numBytesRead = ser_Read ((char *)&BulkBufIn[0], &numBytesAvail);
+//
+// // send over USB
+// if (numBytesRead > 0) {
+// USB_WriteEP (CDC_DEP_IN, &BulkBufIn[0], numBytesRead);
+// }
+// else {
+// CDC_DepInEmpty = 1;
+// }
+//
+//
+}
+
+
+/*----------------------------------------------------------------------------
+ CDC_BulkOut call on DataOut Request
+ Parameters: none
+ Return Value: none
+ *---------------------------------------------------------------------------*/
+void CDC_BulkOut(void)
+{
+ int numBytesRead;
+
+ // get data from USB into intermediate buffer
+ numBytesRead = USB_ReadEP(CDC_DEP_OUT, &BulkBufOut[0]);
+
+ // ... add code to check for overwrite
+
+ // store data in a buffer to transmit it over serial interface
+ CDC_WrOutBuf ((char *)&BulkBufOut[0], &numBytesRead);
+}
+
+
+/*----------------------------------------------------------------------------
+ Get the SERIAL_STATE as defined in usbcdc11.pdf, 6.3.5, Table 69.
+ Parameters: none
+ Return Value: SerialState as defined in usbcdc11.pdf
+ *---------------------------------------------------------------------------*/
+unsigned short CDC_GetSerialState (void)
+{
+ CDC_SerialState = 0;
+
+ return (CDC_SerialState);
+}
+
+
+/*----------------------------------------------------------------------------
+ Send the SERIAL_STATE notification as defined in usbcdc11.pdf, 6.3.5.
+ *---------------------------------------------------------------------------*/
+void CDC_NotificationIn (void)
+{
+ NotificationBuf[0] = 0xA1; // bmRequestType
+ NotificationBuf[1] = CDC_NOTIFICATION_SERIAL_STATE; // bNotification (SERIAL_STATE)
+ NotificationBuf[2] = 0x00; // wValue
+ NotificationBuf[3] = 0x00;
+ NotificationBuf[4] = 0x00; // wIndex (Interface #, LSB first)
+ NotificationBuf[5] = 0x00;
+ NotificationBuf[6] = 0x02; // wLength (Data length = 2 bytes, LSB first)
+ NotificationBuf[7] = 0x00;
+ NotificationBuf[8] = (CDC_SerialState >> 0) & 0xFF; // UART State Bitmap (16bits, LSB first)
+ NotificationBuf[9] = (CDC_SerialState >> 8) & 0xFF;
+
+ USB_WriteEP (CDC_CEP_IN, &NotificationBuf[0], 10); // send notification
+}
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: cdcuser.h
+ * Purpose: USB Communication Device Class User module Definitions
+ * Version: V1.10
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __CDCUSER_H__
+#define __CDCUSER_H__
+
+/* CDC buffer handling */
+extern int CDC_RdOutBuf (char *buffer, const int *length);
+extern int CDC_WrOutBuf (const char *buffer, int *length);
+extern int CDC_OutBufAvailChar (int *availChar);
+
+
+/* CDC Data In/Out Endpoint Address */
+#define CDC_DEP_IN 0x83
+#define CDC_DEP_OUT 0x03
+
+/* CDC Communication In Endpoint Address */
+#define CDC_CEP_IN 0x81
+
+/* CDC Requests Callback Functions */
+extern uint32_t CDC_SendEncapsulatedCommand (void);
+extern uint32_t CDC_GetEncapsulatedResponse (void);
+extern uint32_t CDC_SetCommFeature (unsigned short wFeatureSelector);
+extern uint32_t CDC_GetCommFeature (unsigned short wFeatureSelector);
+extern uint32_t CDC_ClearCommFeature (unsigned short wFeatureSelector);
+extern uint32_t CDC_GetLineCoding (void);
+extern uint32_t CDC_SetLineCoding (void);
+extern uint32_t CDC_SetControlLineState (unsigned short wControlSignalBitmap);
+extern uint32_t CDC_SendBreak (unsigned short wDurationOfBreak);
+
+/* CDC Bulk Callback Functions */
+extern void CDC_BulkIn (void);
+extern void CDC_BulkOut (void);
+
+/* CDC Notification Callback Function */
+extern void CDC_NotificationIn (void);
+
+/* CDC Initialization Function */
+extern void CDC_Init (void);
+
+/* CDC prepare the SERAIAL_STATE */
+extern unsigned short CDC_GetSerialState (void);
+
+/* flow control */
+extern unsigned short CDC_DepInEmpty; // DataEndPoint IN empty
+
+#endif /* __CDCUSER_H__ */
+
--- /dev/null
+/*****************************************************************************
+ * config.h: config file for usbcdc example for NXP LPC13xx Family
+ * Microprocessors
+ *
+ * Copyright(C) 2008, NXP Semiconductor
+ * All rights reserved.
+ *
+ * History
+ * 2008.07.19 ver 1.00 Preliminary version, first Release
+ *
+******************************************************************************/
+
+/*
+Overview:
+ This example shows how to use the USB driver to implement a CDC class USB peripheral.
+ To run this example, you must attach a USB cable to the board. See
+ the "Getting Started Guide" appendix for details.
+
+How to use:
+ Click the debug toolbar button.
+ Click the go button.
+ Plug the LPCXpresso's target side into a PC using a USB cable retrofit
+ or a 3rd party base board.
+
+ * You should be able to see a new COM port on your PC.
+*/
+
+#include "projectconfig.h"
+
+#define USB_VENDOR_ID CFG_USB_VID // Vendor ID
+#define USB_PROD_ID CFG_USB_PID // Product ID
+#define USB_DEVICE 0x0100 // Device ID
+
+#define LED_PORT 0 // Port for led
+#define LED_BIT 7 // Bit on port for led
+
+
+/*********************************************************************************
+** End Of File
+*********************************************************************************/
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usb.h
+ * Purpose: USB Definitions
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __USB_H__
+#define __USB_H__
+
+
+typedef union {
+ uint16_t W;
+ struct {
+ uint8_t L;
+ uint8_t H;
+ } __attribute__((packed)) WB;
+} __attribute__((packed)) WORD_BYTE;
+
+
+/* bmRequestType.Dir */
+#define REQUEST_HOST_TO_DEVICE 0
+#define REQUEST_DEVICE_TO_HOST 1
+
+/* bmRequestType.Type */
+#define REQUEST_STANDARD 0
+#define REQUEST_CLASS 1
+#define REQUEST_VENDOR 2
+#define REQUEST_RESERVED 3
+
+/* bmRequestType.Recipient */
+#define REQUEST_TO_DEVICE 0
+#define REQUEST_TO_INTERFACE 1
+#define REQUEST_TO_ENDPOINT 2
+#define REQUEST_TO_OTHER 3
+
+/* bmRequestType Definition */
+typedef union _REQUEST_TYPE {
+ struct _BM {
+ uint8_t Recipient : 5;
+ uint8_t Type : 2;
+ uint8_t Dir : 1;
+ } __attribute__((packed)) BM;
+ uint8_t B;
+} __attribute__((packed)) REQUEST_TYPE;
+
+/* USB Standard Request Codes */
+#define USB_REQUEST_GET_STATUS 0
+#define USB_REQUEST_CLEAR_FEATURE 1
+#define USB_REQUEST_SET_FEATURE 3
+#define USB_REQUEST_SET_ADDRESS 5
+#define USB_REQUEST_GET_DESCRIPTOR 6
+#define USB_REQUEST_SET_DESCRIPTOR 7
+#define USB_REQUEST_GET_CONFIGURATION 8
+#define USB_REQUEST_SET_CONFIGURATION 9
+#define USB_REQUEST_GET_INTERFACE 10
+#define USB_REQUEST_SET_INTERFACE 11
+#define USB_REQUEST_SYNC_FRAME 12
+
+/* USB GET_STATUS Bit Values */
+#define USB_GETSTATUS_SELF_POWERED 0x01
+#define USB_GETSTATUS_REMOTE_WAKEUP 0x02
+#define USB_GETSTATUS_ENDPOINT_STALL 0x01
+
+/* USB Standard Feature selectors */
+#define USB_FEATURE_ENDPOINT_STALL 0
+#define USB_FEATURE_REMOTE_WAKEUP 1
+
+/* USB Default Control Pipe Setup Packet */
+typedef struct _USB_SETUP_PACKET {
+ REQUEST_TYPE bmRequestType;
+ uint8_t bRequest;
+ WORD_BYTE wValue;
+ WORD_BYTE wIndex;
+ uint16_t wLength;
+} __attribute__((packed)) USB_SETUP_PACKET;
+
+
+/* USB Descriptor Types */
+#define USB_DEVICE_DESCRIPTOR_TYPE 1
+#define USB_CONFIGURATION_DESCRIPTOR_TYPE 2
+#define USB_STRING_DESCRIPTOR_TYPE 3
+#define USB_INTERFACE_DESCRIPTOR_TYPE 4
+#define USB_ENDPOINT_DESCRIPTOR_TYPE 5
+#define USB_DEVICE_QUALIFIER_DESCRIPTOR_TYPE 6
+#define USB_OTHER_SPEED_CONFIG_DESCRIPTOR_TYPE 7
+#define USB_INTERFACE_POWER_DESCRIPTOR_TYPE 8
+#define USB_OTG_DESCRIPTOR_TYPE 9
+#define USB_DEBUG_DESCRIPTOR_TYPE 10
+#define USB_INTERFACE_ASSOCIATION_DESCRIPTOR_TYPE 11
+
+/* USB Device Classes */
+#define USB_DEVICE_CLASS_RESERVED 0x00
+#define USB_DEVICE_CLASS_AUDIO 0x01
+#define USB_DEVICE_CLASS_COMMUNICATIONS 0x02
+#define USB_DEVICE_CLASS_HUMAN_INTERFACE 0x03
+#define USB_DEVICE_CLASS_MONITOR 0x04
+#define USB_DEVICE_CLASS_PHYSICAL_INTERFACE 0x05
+#define USB_DEVICE_CLASS_POWER 0x06
+#define USB_DEVICE_CLASS_PRINTER 0x07
+#define USB_DEVICE_CLASS_STORAGE 0x08
+#define USB_DEVICE_CLASS_HUB 0x09
+#define USB_DEVICE_CLASS_MISCELLANEOUS 0xEF
+#define USB_DEVICE_CLASS_VENDOR_SPECIFIC 0xFF
+
+/* bmAttributes in Configuration Descriptor */
+#define USB_CONFIG_POWERED_MASK 0x40
+#define USB_CONFIG_BUS_POWERED 0x80
+#define USB_CONFIG_SELF_POWERED 0xC0
+#define USB_CONFIG_REMOTE_WAKEUP 0x20
+
+/* bMaxPower in Configuration Descriptor */
+#define USB_CONFIG_POWER_MA(mA) ((mA)/2)
+
+/* bEndpointAddress in Endpoint Descriptor */
+#define USB_ENDPOINT_DIRECTION_MASK 0x80
+#define USB_ENDPOINT_OUT(addr) ((addr) | 0x00)
+#define USB_ENDPOINT_IN(addr) ((addr) | 0x80)
+
+/* bmAttributes in Endpoint Descriptor */
+#define USB_ENDPOINT_TYPE_MASK 0x03
+#define USB_ENDPOINT_TYPE_CONTROL 0x00
+#define USB_ENDPOINT_TYPE_ISOCHRONOUS 0x01
+#define USB_ENDPOINT_TYPE_BULK 0x02
+#define USB_ENDPOINT_TYPE_INTERRUPT 0x03
+#define USB_ENDPOINT_SYNC_MASK 0x0C
+#define USB_ENDPOINT_SYNC_NO_SYNCHRONIZATION 0x00
+#define USB_ENDPOINT_SYNC_ASYNCHRONOUS 0x04
+#define USB_ENDPOINT_SYNC_ADAPTIVE 0x08
+#define USB_ENDPOINT_SYNC_SYNCHRONOUS 0x0C
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FEEDBACK 0x20
+#define USB_ENDPOINT_USAGE_RESERVED 0x30
+
+/* USB Standard Device Descriptor */
+typedef struct _USB_DEVICE_DESCRIPTOR {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint16_t bcdUSB;
+ uint8_t bDeviceClass;
+ uint8_t bDeviceSubClass;
+ uint8_t bDeviceProtocol;
+ uint8_t bMaxPacketSize0;
+ uint16_t idVendor;
+ uint16_t idProduct;
+ uint16_t bcdDevice;
+ uint8_t iManufacturer;
+ uint8_t iProduct;
+ uint8_t iSerialNumber;
+ uint8_t bNumConfigurations;
+} __attribute__((packed)) USB_DEVICE_DESCRIPTOR;
+
+/* USB 2.0 Device Qualifier Descriptor */
+typedef struct _USB_DEVICE_QUALIFIER_DESCRIPTOR {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint16_t bcdUSB;
+ uint8_t bDeviceClass;
+ uint8_t bDeviceSubClass;
+ uint8_t bDeviceProtocol;
+ uint8_t bMaxPacketSize0;
+ uint8_t bNumConfigurations;
+ uint8_t bReserved;
+} __attribute__((packed)) USB_DEVICE_QUALIFIER_DESCRIPTOR;
+
+/* USB Standard Configuration Descriptor */
+typedef struct _USB_CONFIGURATION_DESCRIPTOR {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint16_t wTotalLength;
+ uint8_t bNumInterfaces;
+ uint8_t bConfigurationValue;
+ uint8_t iConfiguration;
+ uint8_t bmAttributes;
+ uint8_t bMaxPower;
+} __attribute__((packed)) USB_CONFIGURATION_DESCRIPTOR;
+
+/* USB Standard Interface Descriptor */
+typedef struct _USB_INTERFACE_DESCRIPTOR {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint8_t bInterfaceNumber;
+ uint8_t bAlternateSetting;
+ uint8_t bNumEndpoints;
+ uint8_t bInterfaceClass;
+ uint8_t bInterfaceSubClass;
+ uint8_t bInterfaceProtocol;
+ uint8_t iInterface;
+} __attribute__((packed)) USB_INTERFACE_DESCRIPTOR;
+
+/* USB Standard Endpoint Descriptor */
+typedef struct _USB_ENDPOINT_DESCRIPTOR {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint8_t bEndpointAddress;
+ uint8_t bmAttributes;
+ uint16_t wMaxPacketSize;
+ uint8_t bInterval;
+} __attribute__((packed)) USB_ENDPOINT_DESCRIPTOR;
+
+/* USB String Descriptor */
+typedef struct _USB_STRING_DESCRIPTOR {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint16_t bString/*[]*/;
+} __attribute__((packed)) USB_STRING_DESCRIPTOR;
+
+/* USB Common Descriptor */
+typedef struct _USB_COMMON_DESCRIPTOR {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+} __attribute__((packed)) USB_COMMON_DESCRIPTOR;
+
+
+#endif /* __USB_H__ */
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usbcfg.h
+ * Purpose: USB Custom Configuration
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *----------------------------------------------------------------------------
+ * History:
+ * V1.20 Added vendor specific support
+ * V1.00 Initial Version
+ *---------------------------------------------------------------------------*/
+
+#ifndef __USBCFG_H__
+#define __USBCFG_H__
+
+
+//*** <<< Use Configuration Wizard in Context Menu >>> ***
+
+
+/*
+// <h> USB Configuration
+// <o0> USB Power
+// <i> Default Power Setting
+// <0=> Bus-powered
+// <1=> Self-powered
+// <o1> Max Number of Interfaces <1-256>
+// <o2> Max Number of Endpoints <1-32>
+// <o3> Max Endpoint 0 Packet Size
+// <8=> 8 Bytes <16=> 16 Bytes <32=> 32 Bytes <64=> 64 Bytes
+// <e4> DMA Transfer
+// <i> Use DMA for selected Endpoints
+// <o5.0> Endpoint 0 Out
+// <o5.1> Endpoint 0 In
+// <o5.2> Endpoint 1 Out
+// <o5.3> Endpoint 1 In
+// <o5.4> Endpoint 2 Out
+// <o5.5> Endpoint 2 In
+// <o5.6> Endpoint 3 Out
+// <o5.7> Endpoint 3 In
+// <o5.8> Endpoint 4 Out
+// <o5.9> Endpoint 4 In
+// </e>
+// </h>
+*/
+
+#define USB_POWER 0
+#define USB_IF_NUM 1
+#define USB_LOGIC_EP_NUM 5
+#define USB_EP_NUM 10
+#define USB_MAX_PACKET0 64
+
+/*
+// <h> USB Event Handlers
+// <h> Device Events
+// <o0.0> Power Event
+// <o1.0> Reset Event
+// <o2.0> Suspend Event
+// <o3.0> Resume Event
+// <o4.0> Remote Wakeup Event
+// <o5.0> Start of Frame Event
+// <o6.0> Error Event
+// </h>
+// <h> Endpoint Events
+// <o7.0> Endpoint 0 Event
+// <o7.1> Endpoint 1 Event
+// <o7.2> Endpoint 2 Event
+// <o7.3> Endpoint 3 Event
+// <o7.4> Endpoint 4 Event
+// <o7.5> Endpoint 5 Event
+// <o7.6> Endpoint 6 Event
+// <o7.7> Endpoint 7 Event
+// <o7.8> Endpoint 8 Event
+// <o7.9> Endpoint 9 Event
+// <o7.10> Endpoint 10 Event
+// <o7.11> Endpoint 11 Event
+// <o7.12> Endpoint 12 Event
+// <o7.13> Endpoint 13 Event
+// <o7.14> Endpoint 14 Event
+// <o7.15> Endpoint 15 Event
+// </h>
+// <h> USB Core Events
+// <o8.0> Set Configuration Event
+// <o9.0> Set Interface Event
+// <o10.0> Set/Clear Feature Event
+// </h>
+// </h>
+*/
+
+#define USB_POWER_EVENT 0
+#define USB_RESET_EVENT 1
+#define USB_SUSPEND_EVENT 1
+#define USB_RESUME_EVENT 1
+#define USB_WAKEUP_EVENT 0
+#define USB_SOF_EVENT 1
+#define USB_ERROR_EVENT 0
+#define USB_EP_EVENT 0x000B
+#define USB_CONFIGURE_EVENT 1
+#define USB_INTERFACE_EVENT 0
+#define USB_FEATURE_EVENT 0
+
+
+/*
+// <e0> USB Class Support
+// <i> enables USB Class specific Requests
+// <e1> Human Interface Device (HID)
+// <o2> Interface Number <0-255>
+// </e>
+// <e3> Mass Storage
+// <o4> Interface Number <0-255>
+// </e>
+// <e5> Audio Device
+// <o6> Control Interface Number <0-255>
+// <o7> Streaming Interface 1 Number <0-255>
+// <o8> Streaming Interface 2 Number <0-255>
+// </e>
+// <e9> Communication Device
+// <o10> Control Interface Number <0-255>
+// <o11> Bulk Interface Number <0-255>
+// <o12> Max Communication Device Buffer Size
+// <8=> 8 Bytes <16=> 16 Bytes <32=> 32 Bytes <64=> 64 Bytes
+// </e>
+// </e>
+*/
+
+#define USB_CLASS 1
+#define USB_HID 0
+#define USB_HID_IF_NUM 0
+#define USB_MSC 0
+#define USB_MSC_IF_NUM 0
+#define USB_AUDIO 0
+#define USB_ADC_CIF_NUM 0
+#define USB_ADC_SIF1_NUM 1
+#define USB_ADC_SIF2_NUM 2
+#define USB_CDC 1
+#define USB_CDC_CIF_NUM 0
+#define USB_CDC_DIF_NUM 1
+#define USB_CDC_BUFSIZE CFG_USBCDC_BUFSIZE
+
+/*
+// <e0> USB Vendor Support
+// <i> enables USB Vendor specific Requests
+// </e>
+*/
+#define USB_VENDOR 0
+
+
+#endif /* __USBCFG_H__ */
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usbcore.c
+ * Purpose: USB Core Module
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *----------------------------------------------------------------------------
+ * History:
+ * V1.20 Added vendor specific requests
+ * Changed string descriptor handling
+ * Reworked Endpoint0
+ * V1.00 Initial Version
+ *----------------------------------------------------------------------------*/
+#include "projectconfig.h"
+
+#include "usb.h"
+#include "usbcfg.h"
+#include "usbhw.h"
+#include "usbcore.h"
+#include "usbdesc.h"
+#include "usbuser.h"
+
+#if (USB_CLASS)
+
+#if (USB_AUDIO)
+#include "audio.h"
+#include "adcuser.h"
+#endif
+
+#if (USB_HID)
+#include "hid.h"
+#include "hiduser.h"
+#endif
+
+#if (USB_MSC)
+#include "msc.h"
+#include "mscuser.h"
+extern MSC_CSW CSW;
+#endif
+
+#if (USB_CDC)
+#include "cdc.h"
+#include "cdcuser.h"
+#endif
+
+#endif
+
+#if (USB_VENDOR)
+#include "vendor.h"
+#endif
+
+uint16_t USB_DeviceStatus;
+uint8_t USB_DeviceAddress;
+volatile uint8_t USB_Configuration;
+uint32_t USB_EndPointMask;
+uint32_t USB_EndPointHalt;
+uint32_t USB_EndPointStall; /* EP must stay stalled */
+uint8_t USB_NumInterfaces;
+uint8_t USB_AltSetting[USB_IF_NUM];
+
+uint8_t EP0Buf[USB_MAX_PACKET0];
+
+
+USB_EP_DATA EP0Data;
+
+USB_SETUP_PACKET SetupPacket;
+
+
+/*
+ * Reset USB Core
+ * Parameters: None
+ * Return Value: None
+ */
+
+void USB_ResetCore (void) {
+
+ USB_DeviceStatus = USB_POWER;
+ USB_DeviceAddress = 0;
+ USB_Configuration = 0;
+ USB_EndPointMask = 0x00010001;
+ USB_EndPointHalt = 0x00000000;
+ USB_EndPointStall = 0x00000000;
+}
+
+
+/*
+ * USB Request - Setup Stage
+ * Parameters: None (global SetupPacket)
+ * Return Value: None
+ */
+
+void USB_SetupStage (void) {
+ USB_ReadEP(0x00, (uint8_t *)&SetupPacket);
+}
+
+
+/*
+ * USB Request - Data In Stage
+ * Parameters: None (global EP0Data)
+ * Return Value: None
+ */
+
+void USB_DataInStage (void) {
+ uint32_t cnt;
+
+ if (EP0Data.Count > USB_MAX_PACKET0) {
+ cnt = USB_MAX_PACKET0;
+ } else {
+ cnt = EP0Data.Count;
+ }
+ cnt = USB_WriteEP(0x80, EP0Data.pData, cnt);
+ EP0Data.pData += cnt;
+ EP0Data.Count -= cnt;
+}
+
+
+/*
+ * USB Request - Data Out Stage
+ * Parameters: None (global EP0Data)
+ * Return Value: None
+ */
+
+void USB_DataOutStage (void) {
+ uint32_t cnt;
+
+ cnt = USB_ReadEP(0x00, EP0Data.pData);
+ EP0Data.pData += cnt;
+ EP0Data.Count -= cnt;
+}
+
+
+/*
+ * USB Request - Status In Stage
+ * Parameters: None
+ * Return Value: None
+ */
+
+void USB_StatusInStage (void) {
+ USB_WriteEP(0x80, NULL, 0);
+}
+
+
+/*
+ * USB Request - Status Out Stage
+ * Parameters: None
+ * Return Value: None
+ */
+
+void USB_StatusOutStage (void) {
+ USB_ReadEP(0x00, EP0Buf);
+}
+
+
+/*
+ * Get Status USB Request
+ * Parameters: None (global SetupPacket)
+ * Return Value: TRUE - Success, FALSE - Error
+ */
+
+static inline uint32_t USB_ReqGetStatus (void) {
+ uint32_t n, m;
+ uint16_t* ep0 = (uint16_t __attribute__((packed)) *)EP0Buf;
+
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+ case REQUEST_TO_DEVICE:
+ EP0Data.pData = (uint8_t *)&USB_DeviceStatus;
+ break;
+ case REQUEST_TO_INTERFACE:
+ if ((USB_Configuration != 0) && (SetupPacket.wIndex.WB.L < USB_NumInterfaces)) {
+ *ep0 = 0;
+ EP0Data.pData = EP0Buf;
+ } else {
+ return (FALSE);
+ }
+ break;
+ case REQUEST_TO_ENDPOINT:
+ n = SetupPacket.wIndex.WB.L & 0x8F;
+ m = (n & 0x80) ? ((1 << 16) << (n & 0x0F)) : (1 << n);
+ if (((USB_Configuration != 0) || ((n & 0x0F) == 0)) && (USB_EndPointMask & m)) {
+ *ep0 = (USB_EndPointHalt & m) ? 1 : 0;
+ EP0Data.pData = EP0Buf;
+ } else {
+ return (FALSE);
+ }
+ break;
+ default:
+ return (FALSE);
+ }
+ return (TRUE);
+}
+
+
+/*
+ * Set/Clear Feature USB Request
+ * Parameters: sc: 0 - Clear, 1 - Set
+ * (global SetupPacket)
+ * Return Value: TRUE - Success, FALSE - Error
+ */
+
+static inline uint32_t USB_ReqSetClrFeature (uint32_t sc) {
+ uint32_t n, m;
+
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+ case REQUEST_TO_DEVICE:
+ if (SetupPacket.wValue.W == USB_FEATURE_REMOTE_WAKEUP) {
+ if (sc) {
+ USB_WakeUpCfg(TRUE);
+ USB_DeviceStatus |= USB_GETSTATUS_REMOTE_WAKEUP;
+ } else {
+ USB_WakeUpCfg(FALSE);
+ USB_DeviceStatus &= ~USB_GETSTATUS_REMOTE_WAKEUP;
+ }
+ } else {
+ return (FALSE);
+ }
+ break;
+ case REQUEST_TO_INTERFACE:
+ return (FALSE);
+ case REQUEST_TO_ENDPOINT:
+ n = SetupPacket.wIndex.WB.L & 0x8F;
+ m = (n & 0x80) ? ((1 << 16) << (n & 0x0F)) : (1 << n);
+ if ((USB_Configuration != 0) && ((n & 0x0F) != 0) && (USB_EndPointMask & m)) {
+ if (SetupPacket.wValue.W == USB_FEATURE_ENDPOINT_STALL) {
+ if (sc) {
+ USB_SetStallEP(n);
+ USB_EndPointHalt |= m;
+ } else {
+ if ((USB_EndPointStall & m) != 0) {
+ return (TRUE);
+ }
+ USB_ClrStallEP(n);
+#if (USB_MSC)
+ if ((n == MSC_EP_IN) && ((USB_EndPointHalt & m) != 0)) {
+ /* Compliance Test: rewrite CSW after unstall */
+ if (CSW.dSignature == MSC_CSW_Signature) {
+ USB_WriteEP(MSC_EP_IN, (uint8_t *)&CSW, sizeof(CSW));
+ }
+ }
+#endif
+ USB_EndPointHalt &= ~m;
+ }
+ } else {
+ return (FALSE);
+ }
+ } else {
+ return (FALSE);
+ }
+ break;
+ default:
+ return (FALSE);
+ }
+ return (TRUE);
+}
+
+
+/*
+ * Set Address USB Request
+ * Parameters: None (global SetupPacket)
+ * Return Value: TRUE - Success, FALSE - Error
+ */
+
+static inline uint32_t USB_ReqSetAddress (void) {
+
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+ case REQUEST_TO_DEVICE:
+ USB_DeviceAddress = 0x80 | SetupPacket.wValue.WB.L;
+ break;
+ default:
+ return (FALSE);
+ }
+ return (TRUE);
+}
+
+
+/*
+ * Get Descriptor USB Request
+ * Parameters: None (global SetupPacket)
+ * Return Value: TRUE - Success, FALSE - Error
+ */
+
+static inline uint32_t USB_ReqGetDescriptor (void) {
+ uint8_t *pD;
+ uint32_t len, n;
+
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+ case REQUEST_TO_DEVICE:
+ switch (SetupPacket.wValue.WB.H) {
+ case USB_DEVICE_DESCRIPTOR_TYPE:
+ EP0Data.pData = (uint8_t *)USB_DeviceDescriptor;
+ len = USB_DEVICE_DESC_SIZE;
+ break;
+ case USB_CONFIGURATION_DESCRIPTOR_TYPE:
+ pD = (uint8_t *)USB_ConfigDescriptor;
+ for (n = 0; n != SetupPacket.wValue.WB.L; n++) {
+ if (((USB_CONFIGURATION_DESCRIPTOR *)pD)->bLength != 0) {
+ pD += ((USB_CONFIGURATION_DESCRIPTOR *)pD)->wTotalLength;
+ }
+ }
+ if (((USB_CONFIGURATION_DESCRIPTOR *)pD)->bLength == 0) {
+ return (FALSE);
+ }
+ EP0Data.pData = pD;
+ len = ((USB_CONFIGURATION_DESCRIPTOR *)pD)->wTotalLength;
+ break;
+ case USB_STRING_DESCRIPTOR_TYPE:
+ pD = (uint8_t *)USB_StringDescriptor;
+ for (n = 0; n != SetupPacket.wValue.WB.L; n++) {
+ if (((USB_STRING_DESCRIPTOR *)pD)->bLength != 0) {
+ pD += ((USB_STRING_DESCRIPTOR *)pD)->bLength;
+ }
+ }
+ if (((USB_STRING_DESCRIPTOR *)pD)->bLength == 0) {
+ return (FALSE);
+ }
+ EP0Data.pData = pD;
+ len = ((USB_STRING_DESCRIPTOR *)EP0Data.pData)->bLength;
+ break;
+ default:
+ return (FALSE);
+ }
+ break;
+ case REQUEST_TO_INTERFACE:
+ switch (SetupPacket.wValue.WB.H) {
+#if USB_HID
+ case HID_HID_DESCRIPTOR_TYPE:
+ if (SetupPacket.wIndex.WB.L != USB_HID_IF_NUM) {
+ return (FALSE); /* Only Single HID Interface is supported */
+ }
+ EP0Data.pData = (uint8_t *)USB_ConfigDescriptor + HID_DESC_OFFSET;
+ len = HID_DESC_SIZE;
+ break;
+ case HID_REPORT_DESCRIPTOR_TYPE:
+ if (SetupPacket.wIndex.WB.L != USB_HID_IF_NUM) {
+ return (FALSE); /* Only Single HID Interface is supported */
+ }
+ EP0Data.pData = (uint8_t *)HID_ReportDescriptor;
+ len = HID_ReportDescSize;
+ break;
+ case HID_PHYSICAL_DESCRIPTOR_TYPE:
+ return (FALSE); /* HID Physical Descriptor is not supported */
+#endif
+ default:
+ return (FALSE);
+ }
+ break;
+ default:
+ return (FALSE);
+ }
+
+ if (EP0Data.Count > len) {
+ EP0Data.Count = len;
+ }
+
+ return (TRUE);
+}
+
+/*
+ * Get Configuration USB Request
+ * Parameters: None (global SetupPacket)
+ * Return Value: TRUE - Success, FALSE - Error
+ */
+
+static inline uint32_t USB_ReqGetConfiguration (void) {
+
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+ case REQUEST_TO_DEVICE:
+ // Added cast to avoid warnings due to USB_Configuration being volatile (KTownsend)
+ EP0Data.pData = (uint8_t *)&USB_Configuration;
+ break;
+ default:
+ return (FALSE);
+ }
+ return (TRUE);
+}
+
+/*
+ * Set Configuration USB Request
+ * Parameters: None (global SetupPacket)
+ * Return Value: TRUE - Success, FALSE - Error
+ */
+
+static inline uint32_t USB_ReqSetConfiguration (void) {
+ USB_COMMON_DESCRIPTOR *pD;
+ uint32_t alt = 0;
+ uint32_t n, m;
+
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+ case REQUEST_TO_DEVICE:
+
+ if (SetupPacket.wValue.WB.L) {
+ pD = (USB_COMMON_DESCRIPTOR *)USB_ConfigDescriptor;
+ while (pD->bLength) {
+ switch (pD->bDescriptorType) {
+ case USB_CONFIGURATION_DESCRIPTOR_TYPE:
+ if (((USB_CONFIGURATION_DESCRIPTOR *)pD)->bConfigurationValue == SetupPacket.wValue.WB.L) {
+ USB_Configuration = SetupPacket.wValue.WB.L;
+ USB_NumInterfaces = ((USB_CONFIGURATION_DESCRIPTOR *)pD)->bNumInterfaces;
+ for (n = 0; n < USB_IF_NUM; n++) {
+ USB_AltSetting[n] = 0;
+ }
+ for (n = 1; n < 16; n++) {
+ if (USB_EndPointMask & (1 << n)) {
+ USB_DisableEP(n);
+ }
+ if (USB_EndPointMask & ((1 << 16) << n)) {
+ USB_DisableEP(n | 0x80);
+ }
+ }
+ USB_EndPointMask = 0x00010001;
+ USB_EndPointHalt = 0x00000000;
+ USB_EndPointStall= 0x00000000;
+ USB_Configure(TRUE);
+ if (((USB_CONFIGURATION_DESCRIPTOR *)pD)->bmAttributes & USB_CONFIG_POWERED_MASK) {
+ USB_DeviceStatus |= USB_GETSTATUS_SELF_POWERED;
+ } else {
+ USB_DeviceStatus &= ~USB_GETSTATUS_SELF_POWERED;
+ }
+ } else {
+ UsbAddPtr((void **)&pD, ((USB_CONFIGURATION_DESCRIPTOR *)pD)->wTotalLength);
+ continue;
+ }
+ break;
+ case USB_INTERFACE_DESCRIPTOR_TYPE:
+ alt = ((USB_INTERFACE_DESCRIPTOR *)pD)->bAlternateSetting;
+ break;
+ case USB_ENDPOINT_DESCRIPTOR_TYPE:
+ if (alt == 0) {
+ n = ((USB_ENDPOINT_DESCRIPTOR *)pD)->bEndpointAddress & 0x8F;
+ m = (n & 0x80) ? ((1 << 16) << (n & 0x0F)) : (1 << n);
+ USB_EndPointMask |= m;
+ USB_ConfigEP((USB_ENDPOINT_DESCRIPTOR *)pD);
+ USB_EnableEP(n);
+ USB_ResetEP(n);
+ }
+ break;
+ }
+ UsbAddPtr((void **)&pD, pD->bLength);
+ }
+ }
+ else {
+ USB_Configuration = 0;
+ for (n = 1; n < 16; n++) {
+ if (USB_EndPointMask & (1 << n)) {
+ USB_DisableEP(n);
+ }
+ if (USB_EndPointMask & ((1 << 16) << n)) {
+ USB_DisableEP(n | 0x80);
+ }
+ }
+ USB_EndPointMask = 0x00010001;
+ USB_EndPointHalt = 0x00000000;
+ USB_EndPointStall = 0x00000000;
+ USB_Configure(FALSE);
+ }
+
+ if (USB_Configuration != SetupPacket.wValue.WB.L) {
+ return (FALSE);
+ }
+ break;
+ default:
+ return (FALSE);
+ }
+ return (TRUE);
+}
+
+
+/*
+ * Get Interface USB Request
+ * Parameters: None (global SetupPacket)
+ * Return Value: TRUE - Success, FALSE - Error
+ */
+
+static inline uint32_t USB_ReqGetInterface (void) {
+
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+ case REQUEST_TO_INTERFACE:
+ if ((USB_Configuration != 0) && (SetupPacket.wIndex.WB.L < USB_NumInterfaces)) {
+ EP0Data.pData = USB_AltSetting + SetupPacket.wIndex.WB.L;
+ } else {
+ return (FALSE);
+ }
+ break;
+ default:
+ return (FALSE);
+ }
+ return (TRUE);
+}
+
+
+/*
+ * Set Interface USB Request
+ * Parameters: None (global SetupPacket)
+ * Return Value: TRUE - Success, FALSE - Error
+ */
+
+static inline uint32_t USB_ReqSetInterface (void) {
+ USB_COMMON_DESCRIPTOR *pD;
+ uint32_t ifn = 0, alt = 0, old = 0, msk = 0;
+ uint32_t n, m;
+ uint32_t set;
+
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+ case REQUEST_TO_INTERFACE:
+ if (USB_Configuration == 0) return (FALSE);
+ set = FALSE;
+ pD = (USB_COMMON_DESCRIPTOR *)USB_ConfigDescriptor;
+ while (pD->bLength) {
+ switch (pD->bDescriptorType) {
+ case USB_CONFIGURATION_DESCRIPTOR_TYPE:
+ if (((USB_CONFIGURATION_DESCRIPTOR *)pD)->bConfigurationValue != USB_Configuration) {
+ UsbAddPtr((void **)&pD, ((USB_CONFIGURATION_DESCRIPTOR *)pD)->wTotalLength);
+ continue;
+ }
+ break;
+ case USB_INTERFACE_DESCRIPTOR_TYPE:
+ ifn = ((USB_INTERFACE_DESCRIPTOR *)pD)->bInterfaceNumber;
+ alt = ((USB_INTERFACE_DESCRIPTOR *)pD)->bAlternateSetting;
+ msk = 0;
+ if ((ifn == SetupPacket.wIndex.WB.L) && (alt == SetupPacket.wValue.WB.L)) {
+ set = TRUE;
+ old = USB_AltSetting[ifn];
+ USB_AltSetting[ifn] = (uint8_t)alt;
+ }
+ break;
+ case USB_ENDPOINT_DESCRIPTOR_TYPE:
+ if (ifn == SetupPacket.wIndex.WB.L) {
+ n = ((USB_ENDPOINT_DESCRIPTOR *)pD)->bEndpointAddress & 0x8F;
+ m = (n & 0x80) ? ((1 << 16) << (n & 0x0F)) : (1 << n);
+ if (alt == SetupPacket.wValue.WB.L) {
+ USB_EndPointMask |= m;
+ USB_EndPointHalt &= ~m;
+ USB_ConfigEP((USB_ENDPOINT_DESCRIPTOR *)pD);
+ USB_EnableEP(n);
+ USB_ResetEP(n);
+ msk |= m;
+ }
+ else if ((alt == old) && ((msk & m) == 0)) {
+ USB_EndPointMask &= ~m;
+ USB_EndPointHalt &= ~m;
+ USB_DisableEP(n);
+ }
+ }
+ break;
+ }
+ UsbAddPtr((void **)&pD, pD->bLength);
+ }
+ break;
+ default:
+ return (FALSE);
+ }
+
+ return (set);
+}
+
+/*
+ * USB Endpoint 0 Event Callback
+ * Parameters: event
+ * Return Value: none
+ */
+
+void USB_EndPoint0 (uint32_t event) {
+
+ switch (event) {
+ case USB_EVT_SETUP:
+ USB_SetupStage();
+ USB_DirCtrlEP(SetupPacket.bmRequestType.BM.Dir);
+ EP0Data.Count = SetupPacket.wLength; /* Number of bytes to transfer */
+ switch (SetupPacket.bmRequestType.BM.Type) {
+
+ case REQUEST_STANDARD:
+ switch (SetupPacket.bRequest) {
+ case USB_REQUEST_GET_STATUS:
+ if (!USB_ReqGetStatus()) {
+ goto stall_i;
+ }
+ USB_DataInStage();
+ break;
+
+ case USB_REQUEST_CLEAR_FEATURE:
+ if (!USB_ReqSetClrFeature(0)) {
+ goto stall_i;
+ }
+ USB_StatusInStage();
+#if USB_FEATURE_EVENT
+ USB_Feature_Event();
+#endif
+ break;
+
+ case USB_REQUEST_SET_FEATURE:
+ if (!USB_ReqSetClrFeature(1)) {
+ goto stall_i;
+ }
+ USB_StatusInStage();
+#if USB_FEATURE_EVENT
+ USB_Feature_Event();
+#endif
+ break;
+
+ case USB_REQUEST_SET_ADDRESS:
+ if (!USB_ReqSetAddress()) {
+ goto stall_i;
+ }
+ USB_StatusInStage();
+ break;
+
+ case USB_REQUEST_GET_DESCRIPTOR:
+ if (!USB_ReqGetDescriptor()) {
+ goto stall_i;
+ }
+ USB_DataInStage();
+ break;
+
+ case USB_REQUEST_SET_DESCRIPTOR:
+/*stall_o:*/ USB_SetStallEP(0x00); /* not supported */
+ EP0Data.Count = 0;
+ break;
+
+ case USB_REQUEST_GET_CONFIGURATION:
+ if (!USB_ReqGetConfiguration()) {
+ goto stall_i;
+ }
+ USB_DataInStage();
+ break;
+
+ case USB_REQUEST_SET_CONFIGURATION:
+ if (!USB_ReqSetConfiguration()) {
+ goto stall_i;
+ }
+ USB_StatusInStage();
+#if USB_CONFIGURE_EVENT
+ USB_Configure_Event();
+#endif
+ break;
+
+ case USB_REQUEST_GET_INTERFACE:
+ if (!USB_ReqGetInterface()) {
+ goto stall_i;
+ }
+ USB_DataInStage();
+ break;
+
+ case USB_REQUEST_SET_INTERFACE:
+ if (!USB_ReqSetInterface()) {
+ goto stall_i;
+ }
+ USB_StatusInStage();
+#if USB_INTERFACE_EVENT
+ USB_Interface_Event();
+#endif
+ break;
+
+ default:
+ goto stall_i;
+ }
+ break; /* end case REQUEST_STANDARD */
+
+#if USB_CLASS
+ case REQUEST_CLASS:
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+
+ case REQUEST_TO_DEVICE:
+ goto stall_i; /* not supported */
+
+ case REQUEST_TO_INTERFACE:
+#if USB_HID
+ if (SetupPacket.wIndex.WB.L == USB_HID_IF_NUM) { /* IF number correct? */
+ switch (SetupPacket.bRequest) {
+ case HID_REQUEST_GET_REPORT:
+ if (HID_GetReport()) {
+ EP0Data.pData = EP0Buf; /* point to data to be sent */
+ USB_DataInStage(); /* send requested data */
+ goto setup_class_ok;
+ }
+ break;
+ case HID_REQUEST_SET_REPORT:
+ EP0Data.pData = EP0Buf; /* data to be received */
+ goto setup_class_ok;
+ case HID_REQUEST_GET_IDLE:
+ if (HID_GetIdle()) {
+ EP0Data.pData = EP0Buf; /* point to data to be sent */
+ USB_DataInStage(); /* send requested data */
+ goto setup_class_ok;
+ }
+ break;
+ case HID_REQUEST_SET_IDLE:
+ if (HID_SetIdle()) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto setup_class_ok;
+ }
+ break;
+ case HID_REQUEST_GET_PROTOCOL:
+ if (HID_GetProtocol()) {
+ EP0Data.pData = EP0Buf; /* point to data to be sent */
+ USB_DataInStage(); /* send requested data */
+ goto setup_class_ok;
+ }
+ break;
+ case HID_REQUEST_SET_PROTOCOL:
+ if (HID_SetProtocol()) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto setup_class_ok;
+ }
+ break;
+ }
+ }
+#endif /* USB_HID */
+#if USB_MSC
+ if (SetupPacket.wIndex.WB.L == USB_MSC_IF_NUM) { /* IF number correct? */
+ switch (SetupPacket.bRequest) {
+ case MSC_REQUEST_RESET:
+ if ((SetupPacket.wValue.W == 0) && /* RESET with invalid parameters -> STALL */
+ (SetupPacket.wLength == 0)) {
+ if (MSC_Reset()) {
+ USB_StatusInStage();
+ goto setup_class_ok;
+ }
+ }
+ break;
+ case MSC_REQUEST_GET_MAX_LUN:
+ if ((SetupPacket.wValue.W == 0) && /* GET_MAX_LUN with invalid parameters -> STALL */
+ (SetupPacket.wLength == 1)) {
+ if (MSC_GetMaxLUN()) {
+ EP0Data.pData = EP0Buf;
+ USB_DataInStage();
+ goto setup_class_ok;
+ }
+ }
+ break;
+ }
+ }
+#endif /* USB_MSC */
+#if USB_AUDIO
+ if ((SetupPacket.wIndex.WB.L == USB_ADC_CIF_NUM) || /* IF number correct? */
+ (SetupPacket.wIndex.WB.L == USB_ADC_SIF1_NUM) ||
+ (SetupPacket.wIndex.WB.L == USB_ADC_SIF2_NUM)) {
+ switch (SetupPacket.bRequest) {
+ case AUDIO_REQUEST_GET_CUR:
+ case AUDIO_REQUEST_GET_MIN:
+ case AUDIO_REQUEST_GET_MAX:
+ case AUDIO_REQUEST_GET_RES:
+ if (ADC_IF_GetRequest()) {
+ EP0Data.pData = EP0Buf; /* point to data to be sent */
+ USB_DataInStage(); /* send requested data */
+ goto setup_class_ok;
+ }
+ break;
+ case AUDIO_REQUEST_SET_CUR:
+// case AUDIO_REQUEST_SET_MIN:
+// case AUDIO_REQUEST_SET_MAX:
+// case AUDIO_REQUEST_SET_RES:
+ EP0Data.pData = EP0Buf; /* data to be received */
+ goto setup_class_ok;
+ }
+ }
+#endif /* USB_AUDIO */
+#if USB_CDC
+ if ((SetupPacket.wIndex.WB.L == USB_CDC_CIF_NUM) || /* IF number correct? */
+ (SetupPacket.wIndex.WB.L == USB_CDC_DIF_NUM)) {
+ switch (SetupPacket.bRequest) {
+ case CDC_SEND_ENCAPSULATED_COMMAND:
+ EP0Data.pData = EP0Buf; /* data to be received, see USB_EVT_OUT */
+ goto setup_class_ok;
+ case CDC_GET_ENCAPSULATED_RESPONSE:
+ if (CDC_GetEncapsulatedResponse()) {
+ EP0Data.pData = EP0Buf; /* point to data to be sent */
+ USB_DataInStage(); /* send requested data */
+ goto setup_class_ok;
+ }
+ break;
+ case CDC_SET_COMM_FEATURE:
+ EP0Data.pData = EP0Buf; /* data to be received, see USB_EVT_OUT */
+ goto setup_class_ok;
+ case CDC_GET_COMM_FEATURE:
+ if (CDC_GetCommFeature(SetupPacket.wValue.W)) {
+ EP0Data.pData = EP0Buf; /* point to data to be sent */
+ USB_DataInStage(); /* send requested data */
+ goto setup_class_ok;
+ }
+ break;
+ case CDC_CLEAR_COMM_FEATURE:
+ if (CDC_ClearCommFeature(SetupPacket.wValue.W)) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto setup_class_ok;
+ }
+ break;
+ case CDC_SET_LINE_CODING:
+ EP0Data.pData = EP0Buf; /* data to be received, see USB_EVT_OUT */
+ goto setup_class_ok;
+ case CDC_GET_LINE_CODING:
+ if (CDC_GetLineCoding()) {
+ EP0Data.pData = EP0Buf; /* point to data to be sent */
+ USB_DataInStage(); /* send requested data */
+ goto setup_class_ok;
+ }
+ break;
+ case CDC_SET_CONTROL_LINE_STATE:
+ if (CDC_SetControlLineState(SetupPacket.wValue.W)) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto setup_class_ok;
+ }
+ break;
+ case CDC_SEND_BREAK:
+ if (CDC_SendBreak(SetupPacket.wValue.W)) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto setup_class_ok;
+ }
+ break;
+ }
+ }
+#endif /* USB_CDC */
+ goto stall_i; /* not supported */
+ /* end case REQUEST_TO_INTERFACE */
+
+ case REQUEST_TO_ENDPOINT:
+#if USB_AUDIO
+ switch (SetupPacket.bRequest) {
+ case AUDIO_REQUEST_GET_CUR:
+ case AUDIO_REQUEST_GET_MIN:
+ case AUDIO_REQUEST_GET_MAX:
+ case AUDIO_REQUEST_GET_RES:
+ if (ADC_EP_GetRequest()) {
+ EP0Data.pData = EP0Buf; /* point to data to be sent */
+ USB_DataInStage(); /* send requested data */
+ goto setup_class_ok;
+ }
+ break;
+ case AUDIO_REQUEST_SET_CUR:
+// case AUDIO_REQUEST_SET_MIN:
+// case AUDIO_REQUEST_SET_MAX:
+// case AUDIO_REQUEST_SET_RES:
+ EP0Data.pData = EP0Buf; /* data to be received */
+ goto setup_class_ok;
+ }
+#endif /* USB_AUDIO */
+ goto stall_i;
+ /* end case REQUEST_TO_ENDPOINT */
+
+ default:
+ goto stall_i;
+ }
+setup_class_ok: /* request finished successfully */
+ break; /* end case REQUEST_CLASS */
+#endif /* USB_CLASS */
+
+#if USB_VENDOR
+ case REQUEST_VENDOR:
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+
+ case REQUEST_TO_DEVICE:
+ if (!USB_ReqVendorDev(TRUE)) {
+ goto stall_i; /* not supported */
+ }
+ break;
+
+ case REQUEST_TO_INTERFACE:
+ if (!USB_ReqVendorIF(TRUE)) {
+ goto stall_i; /* not supported */
+ }
+ break;
+
+ case REQUEST_TO_ENDPOINT:
+ if (!USB_ReqVendorEP(TRUE)) {
+ goto stall_i; /* not supported */
+ }
+ break;
+
+ default:
+ goto stall_i;
+ }
+
+ if (SetupPacket.wLength) {
+ if (SetupPacket.bmRequestType.BM.Dir == REQUEST_DEVICE_TO_HOST) {
+ USB_DataInStage();
+ }
+ } else {
+ USB_StatusInStage();
+ }
+
+ break; /* end case REQUEST_VENDOR */
+#endif /* USB_VENDOR */
+
+ default:
+stall_i: USB_SetStallEP(0x80);
+ EP0Data.Count = 0;
+ break;
+ }
+ break; /* end case USB_EVT_SETUP */
+
+ case USB_EVT_OUT:
+ if (SetupPacket.bmRequestType.BM.Dir == REQUEST_HOST_TO_DEVICE) {
+ if (EP0Data.Count) { /* still data to receive ? */
+ USB_DataOutStage(); /* receive data */
+ if (EP0Data.Count == 0) { /* data complete ? */
+ switch (SetupPacket.bmRequestType.BM.Type) {
+
+ case REQUEST_STANDARD:
+ goto stall_i; /* not supported */
+
+#if (USB_CLASS)
+ case REQUEST_CLASS:
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+ case REQUEST_TO_DEVICE:
+ goto stall_i; /* not supported */
+
+ case REQUEST_TO_INTERFACE:
+#if USB_HID
+ if (SetupPacket.wIndex.WB.L == USB_HID_IF_NUM) { /* IF number correct? */
+ switch (SetupPacket.bRequest) {
+ case HID_REQUEST_SET_REPORT:
+ if (HID_SetReport()) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto out_class_ok;
+ }
+ break;
+ }
+ }
+#endif /* USB_HID */
+#if USB_AUDIO
+ if ((SetupPacket.wIndex.WB.L == USB_ADC_CIF_NUM) || /* IF number correct? */
+ (SetupPacket.wIndex.WB.L == USB_ADC_SIF1_NUM) ||
+ (SetupPacket.wIndex.WB.L == USB_ADC_SIF2_NUM)) {
+ switch (SetupPacket.bRequest) {
+ case AUDIO_REQUEST_SET_CUR:
+// case AUDIO_REQUEST_SET_MIN:
+// case AUDIO_REQUEST_SET_MAX:
+// case AUDIO_REQUEST_SET_RES:
+ if (ADC_IF_SetRequest()) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto out_class_ok;
+ }
+ break;
+ }
+ }
+#endif /* USB_AUDIO */
+#if USB_CDC
+ if ((SetupPacket.wIndex.WB.L == USB_CDC_CIF_NUM) || /* IF number correct? */
+ (SetupPacket.wIndex.WB.L == USB_CDC_DIF_NUM)) {
+ switch (SetupPacket.bRequest) {
+ case CDC_SEND_ENCAPSULATED_COMMAND:
+ if (CDC_SendEncapsulatedCommand()) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto out_class_ok;
+ }
+ break;
+ case CDC_SET_COMM_FEATURE:
+ if (CDC_SetCommFeature(SetupPacket.wValue.W)) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto out_class_ok;
+ }
+ break;
+ case CDC_SET_LINE_CODING:
+ if (CDC_SetLineCoding()) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto out_class_ok;
+ }
+ break;
+ }
+ }
+#endif /* USB_CDC */
+ goto stall_i;
+ /* end case REQUEST_TO_INTERFACE */
+
+ case REQUEST_TO_ENDPOINT:
+#if USB_AUDIO
+ switch (SetupPacket.bRequest) {
+ case AUDIO_REQUEST_SET_CUR:
+// case AUDIO_REQUEST_SET_MIN:
+// case AUDIO_REQUEST_SET_MAX:
+// case AUDIO_REQUEST_SET_RES:
+ if (ADC_EP_SetRequest()) {
+ USB_StatusInStage(); /* send Acknowledge */
+ goto out_class_ok;
+ }
+ break;
+ }
+#endif /* USB_AUDIO */
+ goto stall_i;
+ /* end case REQUEST_TO_ENDPOINT */
+
+ default:
+ goto stall_i;
+ }
+out_class_ok: /* request finished successfully */
+ break; /* end case REQUEST_CLASS */
+#endif /* USB_CLASS */
+
+#if USB_VENDOR
+ case REQUEST_VENDOR:
+ switch (SetupPacket.bmRequestType.BM.Recipient) {
+
+ case REQUEST_TO_DEVICE:
+ if (!USB_ReqVendorDev(FALSE)) {
+ goto stall_i; /* not supported */
+ }
+ break;
+
+ case REQUEST_TO_INTERFACE:
+ if (!USB_ReqVendorIF(FALSE)) {
+ goto stall_i; /* not supported */
+ }
+ break;
+
+ case REQUEST_TO_ENDPOINT:
+ if (!USB_ReqVendorEP(FALSE)) {
+ goto stall_i; /* not supported */
+ }
+ break;
+
+ default:
+ goto stall_i;
+ }
+
+ USB_StatusInStage();
+
+ break; /* end case REQUEST_VENDOR */
+#endif /* USB_VENDOR */
+
+ default:
+ goto stall_i;
+ }
+ }
+ }
+ } else {
+ USB_StatusOutStage(); /* receive Acknowledge */
+ }
+ break; /* end case USB_EVT_OUT */
+
+ case USB_EVT_IN :
+ if (SetupPacket.bmRequestType.BM.Dir == REQUEST_DEVICE_TO_HOST) {
+ USB_DataInStage(); /* send data */
+ } else {
+ if (USB_DeviceAddress & 0x80) {
+ USB_DeviceAddress &= 0x7F;
+ USB_SetAddress(USB_DeviceAddress);
+ }
+ }
+ break; /* end case USB_EVT_IN */
+
+ case USB_EVT_OUT_STALL:
+ USB_ClrStallEP(0x00);
+ break;
+
+ case USB_EVT_IN_STALL:
+ USB_ClrStallEP(0x80);
+ break;
+
+ }
+}
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usbcore.h
+ * Purpose: USB Core Definitions
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __USBCORE_H__
+#define __USBCORE_H__
+
+#include "usbcfg.h"
+
+/* USB Endpoint Data Structure */
+typedef struct _USB_EP_DATA {
+ uint8_t *pData;
+ uint16_t Count;
+} USB_EP_DATA;
+
+/* USB Core Global Variables */
+extern uint16_t USB_DeviceStatus;
+extern uint8_t USB_DeviceAddress;
+volatile extern uint8_t USB_Configuration;
+extern uint32_t USB_EndPointMask;
+extern uint32_t USB_EndPointHalt;
+extern uint32_t USB_EndPointStall;
+extern uint8_t USB_AltSetting[USB_IF_NUM];
+
+
+/* USB Endpoint 0 Buffer */
+extern uint8_t EP0Buf[USB_MAX_PACKET0];
+
+/* USB Endpoint 0 Data Info */
+extern USB_EP_DATA EP0Data;
+
+/* USB Setup Packet */
+extern USB_SETUP_PACKET SetupPacket;
+
+/* USB Core Functions */
+extern void USB_ResetCore (void);
+
+/* Newer C compilers make it really difficult to add
+ * an integer to a pointer */
+static inline void UsbAddPtr(void **vpptr, uint32_t n);
+
+/*
+ * Add a number of bytes to a pointer's address
+ * Harder than you might think. Some compilers say:
+ * Expected an lvalue -- Assignment expects its first operand to be
+ * an lvalue. Please note that a cast removes the lvaluedness of an
+ * expression.
+ *
+ * vpptr = void pointer to pointer
+ * n = number of bytes to add to pointer
+ * Call looks like: AddPtr((void **)&myPointer, 8);
+ */
+static inline void UsbAddPtr(void **vpptr, uint32_t n)
+{
+ /* Declare a pointer to a pointer to a byte. Only a byte pointer
+ * can be incremented by a number of bytes. Other pointers will
+ * increment by a multiple of what they point to.
+ */
+ uint8_t **bpptr;
+
+ /* Convert our void pointer to a pointer to a byte pointer to a pointer */
+ bpptr = (uint8_t **)vpptr;
+
+ /* Add 'n' bytes to our pointer value */
+ (*bpptr) += n;
+}
+
+
+
+
+
+
+
+#endif /* __USBCORE_H__ */
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usbdesc.c
+ * Purpose: USB Descriptors
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *----------------------------------------------------------------------------
+ * History:
+ * V1.20 Changed string descriptor handling
+ * V1.00 Initial Version
+ *---------------------------------------------------------------------------*/
+#include "projectconfig.h"
+#include "usb.h"
+#include "cdc.h"
+#include "usbcfg.h"
+#include "usbdesc.h"
+#include "config.h"
+
+
+/* USB Standard Device Descriptor */
+const uint8_t USB_DeviceDescriptor[] = {
+ USB_DEVICE_DESC_SIZE, /* bLength */
+ USB_DEVICE_DESCRIPTOR_TYPE, /* bDescriptorType */
+ WBVAL(0x0200), /* 2.0 */ /* bcdUSB */
+ USB_DEVICE_CLASS_COMMUNICATIONS, /* bDeviceClass CDC*/
+ 0x00, /* bDeviceSubClass */
+ 0x00, /* bDeviceProtocol */
+ USB_MAX_PACKET0, /* bMaxPacketSize0 */
+ WBVAL(USB_VENDOR_ID), /* idVendor */
+ WBVAL(USB_PROD_ID), /* idProduct */
+ WBVAL(USB_DEVICE), /* 1.00 */ /* bcdDevice */
+ 0x01, /* iManufacturer */
+ 0x02, /* iProduct */
+ 0x03, /* iSerialNumber */
+ 0x01 /* bNumConfigurations: one possible configuration*/
+};
+
+/* USB Configuration Descriptor */
+/* All Descriptors (Configuration, Interface, Endpoint, Class, Vendor */
+const uint8_t USB_ConfigDescriptor[] = {
+/* Configuration 1 */
+ USB_CONFIGUARTION_DESC_SIZE, /* bLength */
+ USB_CONFIGURATION_DESCRIPTOR_TYPE, /* bDescriptorType */
+ WBVAL( /* wTotalLength */
+ 1*USB_CONFIGUARTION_DESC_SIZE +
+ 1*USB_INTERFACE_DESC_SIZE + /* communication interface */
+ 0x0013 + /* CDC functions */
+ 1*USB_ENDPOINT_DESC_SIZE + /* interrupt endpoint */
+ 1*USB_INTERFACE_DESC_SIZE + /* data interface */
+ 2*USB_ENDPOINT_DESC_SIZE /* bulk endpoints */
+ ),
+ 0x02, /* bNumInterfaces */
+ 0x01, /* bConfigurationValue: 0x01 is used to select this configuration */
+ 0x00, /* iConfiguration: no string to describe this configuration */
+ USB_CONFIG_BUS_POWERED /*|*/ /* bmAttributes */
+/*USB_CONFIG_REMOTE_WAKEUP*/,
+ USB_CONFIG_POWER_MA(100), /* bMaxPower, device power consumption is 100 mA */
+/* Interface 0, Alternate Setting 0, Communication class interface descriptor */
+ USB_INTERFACE_DESC_SIZE, /* bLength */
+ USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */
+ USB_CDC_CIF_NUM, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: Alternate setting */
+ 0x01, /* bNumEndpoints: One endpoint used */
+ CDC_COMMUNICATION_INTERFACE_CLASS, /* bInterfaceClass: Communication Interface Class */
+ CDC_ABSTRACT_CONTROL_MODEL, /* bInterfaceSubClass: Abstract Control Model */
+ 0x00, /* bInterfaceProtocol: no protocol used */
+ 0x5E, /* iInterface: */
+/*Header Functional Descriptor*/
+ 0x05, /* bLength: Endpoint Descriptor size */
+ CDC_CS_INTERFACE, /* bDescriptorType: CS_INTERFACE */
+ CDC_HEADER, /* bDescriptorSubtype: Header Func Desc */
+ WBVAL(CDC_V1_10), /* 1.10 */ /* bcdCDC */
+/*Call Management Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ CDC_CS_INTERFACE, /* bDescriptorType: CS_INTERFACE */
+ CDC_CALL_MANAGEMENT, /* bDescriptorSubtype: Call Management Func Desc */
+ 0x01, /* bmCapabilities: device handles call management */
+ 0x01, /* bDataInterface: CDC data IF ID */
+/*Abstract Control Management Functional Descriptor*/
+ 0x04, /* bFunctionLength */
+ CDC_CS_INTERFACE, /* bDescriptorType: CS_INTERFACE */
+ CDC_ABSTRACT_CONTROL_MANAGEMENT, /* bDescriptorSubtype: Abstract Control Management desc */
+ 0x02, /* bmCapabilities: SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported */
+/*Union Functional Descriptor*/
+ 0x05, /* bFunctionLength */
+ CDC_CS_INTERFACE, /* bDescriptorType: CS_INTERFACE */
+ CDC_UNION, /* bDescriptorSubtype: Union func desc */
+ USB_CDC_CIF_NUM, /* bMasterInterface: Communication class interface is master */
+ USB_CDC_DIF_NUM, /* bSlaveInterface0: Data class interface is slave 0 */
+/*Endpoint 1 Descriptor*/ /* event notification (optional) */
+ USB_ENDPOINT_DESC_SIZE, /* bLength */
+ USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType */
+ USB_ENDPOINT_IN(1), /* bEndpointAddress */
+ USB_ENDPOINT_TYPE_INTERRUPT, /* bmAttributes */
+ WBVAL(0x0010), /* wMaxPacketSize */
+ 0x02, /* 2ms */ /* bInterval */
+/* Interface 1, Alternate Setting 0, Data class interface descriptor*/
+ USB_INTERFACE_DESC_SIZE, /* bLength */
+ USB_INTERFACE_DESCRIPTOR_TYPE, /* bDescriptorType */
+ USB_CDC_DIF_NUM, /* bInterfaceNumber: Number of Interface */
+ 0x00, /* bAlternateSetting: no alternate setting */
+ 0x02, /* bNumEndpoints: two endpoints used */
+ CDC_DATA_INTERFACE_CLASS, /* bInterfaceClass: Data Interface Class */
+ 0x00, /* bInterfaceSubClass: no subclass available */
+ 0x00, /* bInterfaceProtocol: no protocol used */
+ 0x5E, /* iInterface: */
+/* Endpoint, EP3 Bulk Out */
+ USB_ENDPOINT_DESC_SIZE, /* bLength */
+ USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType */
+ USB_ENDPOINT_OUT(3), /* bEndpointAddress */
+ USB_ENDPOINT_TYPE_BULK, /* bmAttributes */
+ WBVAL(64), /* wMaxPacketSize */
+ 0x00, /* bInterval: ignore for Bulk transfer */
+/* Endpoint, EP3 Bulk In */
+ USB_ENDPOINT_DESC_SIZE, /* bLength */
+ USB_ENDPOINT_DESCRIPTOR_TYPE, /* bDescriptorType */
+ USB_ENDPOINT_IN(3), /* bEndpointAddress */
+ USB_ENDPOINT_TYPE_BULK, /* bmAttributes */
+ WBVAL(64), /* wMaxPacketSize */
+ 0x00, /* bInterval: ignore for Bulk transfer */
+/* Terminator */
+ 0 /* bLength */
+};
+
+
+
+
+/* USB String Descriptor (optional) */
+const uint8_t USB_StringDescriptor[] = {
+/* Index 0x00: LANGID Codes */
+ 0x04, /* bLength */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ WBVAL(0x0409), /* US English */ /* wLANGID */
+/* Index 0x01: Manufacturer */
+ (13*2 + 2), /* bLength (13 Char + Type + lenght) */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ 'M',0,
+ 'I',0,
+ 'C',0,
+ 'R',0,
+ 'O',0,
+ 'B',0,
+ 'U',0,
+ 'I',0,
+ 'L',0,
+ 'D',0,
+ 'E',0,
+ 'R',0,
+ ' ',0,
+/* Index 0x02: Product */
+ (17*2 + 2), /* bLength ( 17 Char + Type + lenght) */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ 'L',0,
+ 'P',0,
+ 'C',0,
+ '1',0,
+ '3',0,
+ '4',0,
+ '3',0,
+ ' ',0,
+ 'C',0,
+ 'O',0,
+ 'M',0,
+ ' ',0,
+ 'P',0,
+ 'O',0,
+ 'R',0,
+ 'T',0,
+ ' ',0,
+/* Index 0x03: Serial Number */
+ (12*2 + 2), /* bLength (12 Char + Type + lenght) */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ 'D',0,
+ 'E',0,
+ 'M',0,
+ 'O',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+/* Index 0x04: Interface 0, Alternate Setting 0 */
+ ( 4*2 + 2), /* bLength (4 Char + Type + lenght) */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ 'V',0,
+ 'C',0,
+ 'O',0,
+ 'M',0,
+};
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usbdesc.h
+ * Purpose: USB Descriptors Definitions
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __USBDESC_H__
+#define __USBDESC_H__
+
+
+#define WBVAL(x) ((x) & 0xFF),(((x) >> 8) & 0xFF)
+
+#define USB_DEVICE_DESC_SIZE (sizeof(USB_DEVICE_DESCRIPTOR))
+#define USB_CONFIGUARTION_DESC_SIZE (sizeof(USB_CONFIGURATION_DESCRIPTOR))
+#define USB_INTERFACE_DESC_SIZE (sizeof(USB_INTERFACE_DESCRIPTOR))
+#define USB_ENDPOINT_DESC_SIZE (sizeof(USB_ENDPOINT_DESCRIPTOR))
+
+extern const uint8_t USB_DeviceDescriptor[];
+extern const uint8_t USB_ConfigDescriptor[];
+extern const uint8_t USB_StringDescriptor[];
+
+
+#endif /* __USBDESC_H__ */
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usbhw.c
+ * Purpose: USB Hardware Layer Module for Philips LPC17xx
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *----------------------------------------------------------------------------
+ * History:
+ * V1.20 Added USB_ClearEPBuf
+ * V1.00 Initial Version
+ *----------------------------------------------------------------------------*/
+#include "projectconfig.h" /* LPC13xx definitions */
+#include "usb.h"
+#include "usbcfg.h"
+#include "usbreg.h"
+#include "usbhw.h"
+#include "usbcore.h"
+#include "usbuser.h"
+
+
+/*
+ * USB and IO Clock configuration only.
+ * The same as call PeriClkIOInit(IOCON_USB);
+ * The purpose is to reduce the code space for
+ * overall USB project and reserve code space for
+ * USB debugging.
+ * Parameters: None
+ * Return Value: None
+ */
+void USBIOClkConfig( void )
+{
+ /* Enable AHB clock to the GPIO domain. */
+ SCB_SYSAHBCLKCTRL |= SCB_SYSAHBCLKCTRL_GPIO;
+
+ /* Enable Timer32_1, IOCON, and USB blocks */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT32B1 | SCB_SYSAHBCLKCTRL_IOCON | SCB_SYSAHBCLKCTRL_USB_REG);
+
+ // Setup USB clock
+ SCB_PDRUNCFG &= ~(SCB_PDSLEEPCFG_USBPAD_PD); // Power-up USB PHY
+ SCB_PDRUNCFG &= ~(SCB_PDSLEEPCFG_USBPLL_PD); // Power-up USB PLL
+
+ SCB_USBPLLCLKSEL = SCB_USBPLLCLKSEL_SOURCE_MAINOSC; // Select PLL Input
+ SCB_USBPLLCLKUEN = SCB_USBPLLCLKUEN_UPDATE; // Update Clock Source
+ SCB_USBPLLCLKUEN = SCB_USBPLLCLKUEN_DISABLE; // Toggle Update Register
+ SCB_USBPLLCLKUEN = SCB_USBPLLCLKUEN_UPDATE;
+
+ // Wait until the USB clock is updated
+ while (!(SCB_USBPLLCLKUEN & SCB_USBPLLCLKUEN_UPDATE));
+
+ // Set USB clock to 48MHz (12MHz x 4)
+ SCB_USBPLLCTRL = (SCB_USBPLLCTRL_MULT_4);
+ while (!(SCB_USBPLLSTAT & SCB_USBPLLSTAT_LOCK)); // Wait Until PLL Locked
+ SCB_USBCLKSEL = SCB_USBCLKSEL_SOURCE_USBPLLOUT;
+
+ // Set USB pin functions
+ IOCON_PIO0_1 &= ~IOCON_PIO0_1_FUNC_MASK;
+ IOCON_PIO0_1 |= IOCON_PIO0_1_FUNC_CLKOUT; // CLK OUT
+ IOCON_PIO0_3 &= ~IOCON_PIO0_3_FUNC_MASK;
+ IOCON_PIO0_3 |= IOCON_PIO0_3_FUNC_USB_VBUS; // VBus
+ IOCON_PIO0_6 &= ~IOCON_PIO0_6_FUNC_MASK;
+ IOCON_PIO0_6 |= IOCON_PIO0_6_FUNC_USB_CONNECT; // Soft Connect
+
+ return;
+}
+
+/*
+ * Delay number of clock cycles
+ * Parameters: Delay length
+ * Return Value: None
+ */
+
+void delay (uint32_t length )
+{
+ uint32_t i;
+
+ for ( i = 0; i < length; i++ )
+ {
+ __asm("nop");
+ }
+ return;
+}
+
+/*
+ * Get Endpoint Physical Address
+ * Parameters: EPNum: Endpoint Number
+ * EPNum.0..3: Address
+ * EPNum.7: Dir
+ * Return Value: Endpoint Physical Address
+ */
+
+uint32_t EPAdr (uint32_t EPNum)
+{
+ uint32_t val;
+
+ val = (EPNum & 0x0F) << 1;
+ if (EPNum & 0x80) {
+ val += 1;
+ }
+ return (val);
+}
+
+
+/*
+ * Write Command
+ * Parameters: cmd: Command
+ * Return Value: None
+ */
+
+void WrCmd (uint32_t cmd)
+{
+ USB_DEVINTCLR = CCEMTY_INT;
+ USB_CMDCODE = cmd;
+ while ((USB_DEVINTST & (CCEMTY_INT | DEV_STAT_INT)) == 0);
+}
+
+
+/*
+ * Write Command Data
+ * Parameters: cmd: Command
+ * val: Data
+ * Return Value: None
+ */
+
+void WrCmdDat (uint32_t cmd, uint32_t val)
+{
+ WrCmd(cmd);
+ WrCmd(val);
+}
+
+
+/*
+ * Write Command to Endpoint
+ * Parameters: cmd: Command
+ * val: Data
+ * Return Value: None
+ */
+
+void WrCmdEP (uint32_t EPNum, uint32_t cmd)
+{
+ WrCmd(CMD_SEL_EP(EPAdr(EPNum)));
+ WrCmd(cmd);
+}
+
+
+/*
+ * Read Command Data
+ * Parameters: cmd: Command
+ * Return Value: Data Value
+ */
+
+uint32_t RdCmdDat (uint32_t cmd)
+{
+ USB_DEVINTCLR = CCEMTY_INT | CDFULL_INT;
+ USB_CMDCODE = cmd;
+ while ((USB_DEVINTST & (CDFULL_INT | DEV_STAT_INT)) == 0);
+ return (USB_CMDDATA);
+}
+
+
+/*
+ * USB Initialize Function
+ * Called by the User to initialize USB
+ * Return Value: None
+ */
+
+void USB_Init (void)
+{
+ // Setup USB clock and pins
+ USBIOClkConfig();
+
+#if USB_FIQ_EVENT
+ /* It's important that only BULK and FRAME(ISO) can be routed
+ to FIQ. */
+ USB_DEVFIQSEL = 0x01; /* SOF Use FIQ */
+
+ /* Enable the USB Interrupt */
+ NVIC_EnableIRQ(USB_FIQn);
+#endif
+
+ /* Enable the USB Interrupt */
+ NVIC_EnableIRQ(USB_IRQn);
+
+ USB_Reset();
+ USB_SetAddress(0);
+ return;
+}
+
+
+/*
+ * USB Connect Function
+ * Called by the User to Connect/Disconnect USB
+ * Parameters: con: Connect/Disconnect
+ * Return Value: None
+ */
+
+void USB_Connect (uint32_t con)
+{
+ WrCmdDat(CMD_SET_DEV_STAT, DAT_WR_BYTE(con ? DEV_CON : 0));
+}
+
+
+/*
+ * USB Reset Function
+ * Called automatically on USB Reset
+ * Return Value: None
+ */
+
+void USB_Reset (void)
+{
+ USB_DEVINTCLR = 0x000FFFFF;
+ /* Enable all eight(8) EPs, note: EP won't be ready until it's
+ configured/enabled when device sending SetEPStatus command
+ to the command engine. */
+ USB_DEVINTEN = DEV_STAT_INT | (0xFF<<1) |
+ (USB_SOF_EVENT ? FRAME_INT : 0);
+ return;
+}
+
+
+/*
+ * USB Suspend Function
+ * Called automatically on USB Suspend
+ * Return Value: None
+ */
+
+void USB_Suspend (void)
+{
+ /* Performed by Hardware */
+}
+
+
+/*
+ * USB Resume Function
+ * Called automatically on USB Resume
+ * Return Value: None
+ */
+
+void USB_Resume (void)
+{
+ /* Performed by Hardware */
+}
+
+
+/*
+ * USB Remote Wakeup Function
+ * Called automatically on USB Remote Wakeup
+ * Return Value: None
+ */
+
+void USB_WakeUp (void)
+{
+ if (USB_DeviceStatus & USB_GETSTATUS_REMOTE_WAKEUP)
+ {
+ WrCmdDat(CMD_SET_DEV_STAT, DAT_WR_BYTE(DEV_CON));
+ }
+}
+
+
+/*
+ * USB Remote Wakeup Configuration Function
+ * Parameters: cfg: Enable/Disable
+ * Return Value: None
+ */
+
+void USB_WakeUpCfg (uint32_t cfg)
+{
+ cfg = cfg; /* Not needed */
+}
+
+
+/*
+ * USB Set Address Function
+ * Parameters: adr: USB Address
+ * Return Value: None
+ */
+
+void USB_SetAddress (uint32_t adr)
+{
+ WrCmdDat(CMD_SET_ADDR, DAT_WR_BYTE(DEV_EN | adr)); /* Don't wait for next */
+ WrCmdDat(CMD_SET_ADDR, DAT_WR_BYTE(DEV_EN | adr)); /* Setup Status Phase */
+}
+
+
+/*
+ * USB Configure Function
+ * Parameters: cfg: Configure/Deconfigure
+ * Return Value: None
+ */
+
+void USB_Configure (uint32_t cfg)
+{
+ WrCmdDat(CMD_CFG_DEV, DAT_WR_BYTE(cfg ? CONF_DVICE : 0));
+ return;
+}
+
+
+/*
+ * Configure USB Endpoint according to Descriptor
+ * Parameters: pEPD: Pointer to Endpoint Descriptor
+ * Return Value: None
+ */
+
+void USB_ConfigEP (USB_ENDPOINT_DESCRIPTOR *pEPD)
+{
+ return;
+}
+
+
+/*
+ * Set Direction for USB Control Endpoint
+ * Parameters: dir: Out (dir == 0), In (dir <> 0)
+ * Return Value: None
+ */
+
+void USB_DirCtrlEP (uint32_t dir)
+{
+ dir = dir; /* Not needed */
+}
+
+
+/*
+ * Enable USB Endpoint
+ * Parameters: EPNum: Endpoint Number
+ * EPNum.0..3: Address
+ * EPNum.7: Dir
+ * Return Value: None
+ */
+
+void USB_EnableEP (uint32_t EPNum)
+{
+ WrCmdDat(CMD_SET_EP_STAT(EPAdr(EPNum)), DAT_WR_BYTE(0));
+}
+
+
+/*
+ * Disable USB Endpoint
+ * Parameters: EPNum: Endpoint Number
+ * EPNum.0..3: Address
+ * EPNum.7: Dir
+ * Return Value: None
+ */
+
+void USB_DisableEP (uint32_t EPNum)
+{
+ WrCmdDat(CMD_SET_EP_STAT(EPAdr(EPNum)), DAT_WR_BYTE(EP_STAT_DA));
+}
+
+
+/*
+ * Reset USB Endpoint
+ * Parameters: EPNum: Endpoint Number
+ * EPNum.0..3: Address
+ * EPNum.7: Dir
+ * Return Value: None
+ */
+
+void USB_ResetEP (uint32_t EPNum)
+{
+ WrCmdDat(CMD_SET_EP_STAT(EPAdr(EPNum)), DAT_WR_BYTE(0));
+}
+
+
+/*
+ * Set Stall for USB Endpoint
+ * Parameters: EPNum: Endpoint Number
+ * EPNum.0..3: Address
+ * EPNum.7: Dir
+ * Return Value: None
+ */
+
+void USB_SetStallEP (uint32_t EPNum)
+{
+ WrCmdDat(CMD_SET_EP_STAT(EPAdr(EPNum)), DAT_WR_BYTE(EP_STAT_ST));
+}
+
+
+/*
+ * Clear Stall for USB Endpoint
+ * Parameters: EPNum: Endpoint Number
+ * EPNum.0..3: Address
+ * EPNum.7: Dir
+ * Return Value: None
+ */
+
+void USB_ClrStallEP (uint32_t EPNum)
+{
+ WrCmdDat(CMD_SET_EP_STAT(EPAdr(EPNum)), DAT_WR_BYTE(0));
+}
+
+
+/*
+ * Clear USB Endpoint Buffer
+ * Parameters: EPNum: Endpoint Number
+ * EPNum.0..3: Address
+ * EPNum.7: Dir
+ * Return Value: None
+ */
+
+void USB_ClearEPBuf (uint32_t EPNum)
+{
+ WrCmdEP(EPNum, CMD_CLR_BUF);
+}
+
+
+/*
+ * Read USB Endpoint Data
+ * Parameters: EPNum: Endpoint Number
+ * EPNum.0..3: Address
+ * EPNum.7: Dir
+ * pData: Pointer to Data Buffer
+ * Return Value: Number of bytes read
+ */
+
+uint32_t USB_ReadEP (uint32_t EPNum, uint8_t *pData)
+{
+ uint32_t cnt, n;
+
+ USB_CTRL = ((EPNum & 0x0F) << 2) | CTRL_RD_EN;
+ /* 3 clock cycles to fetch the packet length from RAM. */
+ delay( 5 );
+
+ do
+ {
+ cnt = USB_RXPLEN;
+ } while ((cnt & PKT_DV) == 0);
+ cnt &= PKT_LNGTH_MASK;
+
+ for (n = 0; n < (cnt + 3) / 4; n++)
+ {
+ *((uint32_t __attribute__((packed)) *)pData) = USB_RXDATA;
+ pData += 4;
+ }
+
+ USB_CTRL = 0;
+
+ if ((EPNum & 0x80) != 0x04)
+ { /* Non-Isochronous Endpoint */
+ WrCmdEP(EPNum, CMD_CLR_BUF);
+ }
+
+ return (cnt);
+}
+
+
+/*
+ * Write USB Endpoint Data
+ * Parameters: EPNum: Endpoint Number
+ * EPNum.0..3: Address
+ * EPNum.7: Dir
+ * pData: Pointer to Data Buffer
+ * cnt: Number of bytes to write
+ * Return Value: Number of bytes written
+ */
+
+uint32_t USB_WriteEP (uint32_t EPNum, uint8_t *pData, uint32_t cnt)
+{
+ uint32_t n;
+
+ USB_CTRL = ((EPNum & 0x0F) << 2) | CTRL_WR_EN;
+ /* 3 clock cycles to fetch the packet length from RAM. */
+ delay( 5 );
+ USB_TXPLEN = cnt;
+
+ for (n = 0; n < (cnt + 3) / 4; n++)
+ {
+ USB_TXDATA = *((uint32_t __attribute__((packed)) *)pData);
+ pData += 4;
+ }
+
+ USB_CTRL = 0;
+
+ WrCmdEP(EPNum, CMD_VALID_BUF);
+
+ return (cnt);
+}
+
+/*
+ * Get USB Last Frame Number
+ * Parameters: None
+ * Return Value: Frame Number
+ */
+
+uint32_t USB_GetFrame (void)
+{
+ uint32_t val;
+
+ WrCmd(CMD_RD_FRAME);
+ val = RdCmdDat(DAT_RD_FRAME);
+ val = val | (RdCmdDat(DAT_RD_FRAME) << 8);
+
+ return (val);
+}
+
+
+/*
+ * USB Interrupt Service Routine
+ */
+
+#ifdef CFG_USBCDC
+void USB_IRQHandler (void)
+{
+ uint32_t disr, val, n, m;
+
+ disr = USB_DEVINTST; /* Device Interrupt Status */
+ USB_DEVINTCLR = disr;
+
+ /* Device Status Interrupt (Reset, Connect change, Suspend/Resume) */
+ if (disr & DEV_STAT_INT)
+ {
+ WrCmd(CMD_GET_DEV_STAT);
+ val = RdCmdDat(DAT_GET_DEV_STAT); /* Device Status */
+ if (val & DEV_RST) { /* Reset */
+ USB_Reset();
+#if USB_RESET_EVENT
+ USB_Reset_Event();
+#endif
+ }
+ if (val & DEV_CON_CH) { /* Connect change */
+#if USB_POWER_EVENT
+ USB_Power_Event(val & DEV_CON);
+#endif
+ }
+ if (val & DEV_SUS_CH) { /* Suspend/Resume */
+ if (val & DEV_SUS) { /* Suspend */
+ USB_Suspend();
+#if USB_SUSPEND_EVENT
+ USB_Suspend_Event();
+#endif
+ } else { /* Resume */
+ USB_Resume();
+#if USB_RESUME_EVENT
+ USB_Resume_Event();
+#endif
+ }
+ }
+ goto isr_end;
+ }
+
+#if USB_SOF_EVENT
+ /* Start of Frame Interrupt */
+ if (disr & FRAME_INT)
+ {
+ USB_DEVINTCLR = FRAME_INT;
+ USB_SOF_Event();
+ // SOFIRQCount++;
+ }
+#endif
+
+#if USB_ERROR_EVENT
+ /* NO error interrupt anymore, below code can be used
+ as example to get error status from command engine. */
+ /* Error Interrupt */
+ if (disr & ERR_INT)
+ {
+ WrCmd(CMD_RD_ERR_STAT);
+ val = RdCmdDat(DAT_RD_ERR_STAT);
+ USB_Error_Event(val);
+ }
+#endif
+
+ /* Endpoint's Interrupt */
+ if (disr & (0xFF<<1)) {
+ /* if any of the EP0 through EP7 is set, or bit 1 through 9 on disr */
+ for (n = 0; n < USB_EP_NUM; n++) { /* Check All Endpoints */
+ /* skip frame interrupt at bit 0 in disr */
+// if (disr & ((1 << n)<<1)) {
+ if ((disr>>1) & (1 << n)) {
+ m = n >> 1;
+ /* clear EP interrupt by sending cmd to the command engine. */
+ WrCmd(CMD_SEL_EP_CLRI(n));
+ val = RdCmdDat(DAT_SEL_EP_CLRI(n));
+ if ((n & 1) == 0) { /* OUT Endpoint */
+ if (n == 0) { /* Control OUT Endpoint */
+ if (val & EP_SEL_STP) { /* Setup Packet */
+ if (USB_P_EP[0]) {
+ USB_P_EP[0](USB_EVT_SETUP);
+ continue;
+ }
+ }
+ }
+ if (USB_P_EP[m]) {
+ USB_P_EP[m](USB_EVT_OUT);
+ }
+ } else { /* IN Endpoint */
+ if (USB_P_EP[m]) {
+ USB_P_EP[m](USB_EVT_IN);
+ }
+ }
+ }
+ }
+ }
+isr_end:
+ return;
+}
+
+#endif
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usbhw.h
+ * Purpose: USB Hardware Layer Definitions
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *----------------------------------------------------------------------------
+ * History:
+ * V1.20 Added USB_ClearEPBuf
+ * V1.00 Initial Version
+ *----------------------------------------------------------------------------*/
+
+#ifndef __USBHW_H__
+#define __USBHW_H__
+
+
+/* USB Error Codes */
+#define USB_ERR_PID 0x0001 /* PID Error */
+#define USB_ERR_UEPKT 0x0002 /* Unexpected Packet */
+#define USB_ERR_DCRC 0x0004 /* Data CRC Error */
+#define USB_ERR_TIMOUT 0x0008 /* Bus Time-out Error */
+#define USB_ERR_EOP 0x0010 /* End of Packet Error */
+#define USB_ERR_B_OVRN 0x0020 /* Buffer Overrun */
+#define USB_ERR_BTSTF 0x0040 /* Bit Stuff Error */
+#define USB_ERR_TGL 0x0080 /* Toggle Bit Error */
+
+/* USB Hardware Functions */
+extern void USBIOClkConfig (void);
+extern void USB_Init (void);
+extern void USB_Connect (uint32_t con);
+extern void USB_Reset (void);
+extern void USB_Suspend (void);
+extern void USB_Resume (void);
+extern void USB_WakeUp (void);
+extern void USB_WakeUpCfg (uint32_t cfg);
+extern void USB_SetAddress (uint32_t adr);
+extern void USB_Configure (uint32_t cfg);
+extern void USB_ConfigEP (USB_ENDPOINT_DESCRIPTOR *pEPD);
+extern void USB_DirCtrlEP (uint32_t dir);
+extern void USB_EnableEP (uint32_t EPNum);
+extern void USB_DisableEP (uint32_t EPNum);
+extern void USB_ResetEP (uint32_t EPNum);
+extern void USB_SetStallEP (uint32_t EPNum);
+extern void USB_ClrStallEP (uint32_t EPNum);
+extern void USB_ClearEPBuf (uint32_t EPNum);
+extern uint32_t USB_ReadEP (uint32_t EPNum, uint8_t *pData);
+extern uint32_t USB_WriteEP (uint32_t EPNum, uint8_t *pData, uint32_t cnt);
+extern uint32_t USB_GetFrame(void);
+extern void USB_IRQHandler (void);
+
+
+#endif /* __USBHW_H__ */
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: USBREG.H
+ * Purpose: USB Hardware Layer Definitions for NXP LPC13xx
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __USBREG_H
+#define __USBREG_H
+
+/* Device Interrupt Bit Definitions */
+#define FRAME_INT (0x1<<0)
+#define EP0_INT (0x1<<1)
+#define EP1_INT (0x1<<2)
+#define EP2_INT (0x1<<3)
+#define EP3_INT (0x1<<4)
+#define EP4_INT (0x1<<5)
+#define EP5_INT (0x1<<6)
+#define EP6_INT (0x1<<7)
+#define EP7_INT (0x1<<8)
+#define DEV_STAT_INT (0x1<<9)
+#define CCEMTY_INT (0x1<<10)
+#define CDFULL_INT (0x1<<11)
+#define RxENDPKT_INT (0x1<<12)
+#define TxENDPKT_INT (0x1<<13)
+
+/* Rx & Tx Packet Length Definitions */
+#define PKT_LNGTH_MASK 0x000003FF
+#define PKT_DV 0x00000400
+#define PKT_RDY 0x00000800
+
+/* USB Control Definitions */
+#define CTRL_RD_EN 0x00000001
+#define CTRL_WR_EN 0x00000002
+
+/* Command Codes */
+#define CMD_SET_ADDR 0x00D00500
+#define CMD_CFG_DEV 0x00D80500
+#define CMD_SET_MODE 0x00F30500
+#define CMD_RD_INT 0x00F40500
+#define DAT_RD_INT 0x00F40200
+#define CMD_RD_FRAME 0x00F50500
+#define DAT_RD_FRAME 0x00F50200
+#define CMD_RD_CHIP_ID 0x00FD0500
+#define DAT_RD_CHIP_ID 0x00FD0200
+
+#define CMD_SET_DEV_STAT 0x00FE0500
+#define CMD_GET_DEV_STAT 0x00FE0500
+#define DAT_GET_DEV_STAT 0x00FE0200
+#define CMD_GET_ERR_CODE 0x00FF0500
+#define DAT_GET_ERR_CODE 0x00FF0200
+
+#define DAT_WR_BYTE(x) (0x00000100 | ((x) << 16))
+#define CMD_SEL_EP(x) (0x00000500 | ((x) << 16))
+#define DAT_SEL_EP(x) (0x00000200 | ((x) << 16))
+#define CMD_SEL_EP_CLRI(x) (0x00400500 | ((x) << 16))
+#define DAT_SEL_EP_CLRI(x) (0x00400200 | ((x) << 16))
+#define CMD_SET_EP_STAT(x) (0x00400500 | ((x) << 16))
+#define CMD_CLR_BUF 0x00F20500
+#define CMD_VALID_BUF 0x00FA0500
+
+/* Device Address Register Definitions */
+#define DEV_ADDR_MASK 0x7F
+#define DEV_EN 0x80
+
+/* Device Configure Register Definitions */
+#define CONF_DVICE 0x01
+
+/* Device Mode Register Definitions */
+#define AP_CLK 0x01
+#define INAK_CI 0x02
+#define INAK_CO 0x04
+#define INAK_AI 0x08
+#define INAK_AO 0x10
+
+/* Device Status Register Definitions */
+#define DEV_CON 0x01
+#define DEV_CON_CH 0x02
+#define DEV_SUS 0x04
+#define DEV_SUS_CH 0x08
+#define DEV_RST 0x10
+
+/* Error Code Register Definitions */
+#define ERR_EC_MASK 0x0F
+#define ERR_EA 0x10
+
+/* Error Status Register Definitions */
+#define ERR_NOERROR 0x00
+#define ERR_PID_ENCODE 0x01
+#define ERR_UNKNOWN_PID 0x02
+#define ERR_UNEXPECT_PKT 0x03
+#define ERR_TCRC 0x04
+#define ERR_DCRC 0x05
+#define ERR_TIMEOUT 0x06
+#define ERR_BABBIE 0x07
+#define ERR_EOF_PKT 0x08
+#define ERR_TX_RX_NAK 0x09
+#define ERR_SENT_STALL 0x0A
+#define ERR_BUF_OVERRUN 0x0B
+#define ERR_SENT_EPT_PKT 0x0C
+#define ERR_BIT_STUFF 0x0D
+#define ERR_SYNC 0x0E
+#define ERR_TOGGLE_BIT 0x0F
+
+/* Endpoint Select Register Definitions */
+#define EP_SEL_F 0x01
+#define EP_SEL_ST 0x02
+#define EP_SEL_STP 0x04
+#define EP_SEL_PO 0x08
+#define EP_SEL_EPN 0x10
+#define EP_SEL_B_1_FULL 0x20
+#define EP_SEL_B_2_FULL 0x40
+
+/* Endpoint Status Register Definitions */
+#define EP_STAT_ST 0x01
+#define EP_STAT_DA 0x20
+#define EP_STAT_RF_MO 0x40
+#define EP_STAT_CND_ST 0x80
+
+/* Clear Buffer Register Definitions */
+#define CLR_BUF_PO 0x01
+
+#endif /* __USBREG_H */
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usbuser.c
+ * Purpose: USB Custom User Module
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+#include "projectconfig.h"
+
+#include "usb.h"
+#include "usbcfg.h"
+#include "usbhw.h"
+#include "usbcore.h"
+#include "usbuser.h"
+#include "cdcuser.h"
+
+
+/*
+ * USB Power Event Callback
+ * Called automatically on USB Power Event
+ * Parameter: power: On(TRUE)/Off(FALSE)
+ */
+
+#if USB_POWER_EVENT
+void USB_Power_Event (uint32_t power) {
+}
+#endif
+
+
+/*
+ * USB Reset Event Callback
+ * Called automatically on USB Reset Event
+ */
+
+#if USB_RESET_EVENT
+void USB_Reset_Event (void) {
+ USB_ResetCore();
+}
+#endif
+
+
+/*
+ * USB Suspend Event Callback
+ * Called automatically on USB Suspend Event
+ */
+
+#if USB_SUSPEND_EVENT
+void USB_Suspend_Event (void) {
+}
+#endif
+
+
+/*
+ * USB Resume Event Callback
+ * Called automatically on USB Resume Event
+ */
+
+#if USB_RESUME_EVENT
+void USB_Resume_Event (void) {
+}
+#endif
+
+
+/*
+ * USB Remote Wakeup Event Callback
+ * Called automatically on USB Remote Wakeup Event
+ */
+
+#if USB_WAKEUP_EVENT
+void USB_WakeUp_Event (void) {
+}
+#endif
+
+
+/*
+ * USB Start of Frame Event Callback
+ * Called automatically on USB Start of Frame Event
+ */
+
+#if USB_SOF_EVENT
+void USB_SOF_Event (void) {
+}
+#endif
+
+
+/*
+ * USB Error Event Callback
+ * Called automatically on USB Error Event
+ * Parameter: error: Error Code
+ */
+
+#if USB_ERROR_EVENT
+void USB_Error_Event (uint32_t error) {
+}
+#endif
+
+
+/*
+ * USB Set Configuration Event Callback
+ * Called automatically on USB Set Configuration Request
+ */
+
+#if USB_CONFIGURE_EVENT
+void USB_Configure_Event (void) {
+
+ if (USB_Configuration) { /* Check if USB is configured */
+ /* add your code here */
+ }
+}
+#endif
+
+
+/*
+ * USB Set Interface Event Callback
+ * Called automatically on USB Set Interface Request
+ */
+
+#if USB_INTERFACE_EVENT
+void USB_Interface_Event (void) {
+}
+#endif
+
+
+/*
+ * USB Set/Clear Feature Event Callback
+ * Called automatically on USB Set/Clear Feature Request
+ */
+
+#if USB_FEATURE_EVENT
+void USB_Feature_Event (void) {
+}
+#endif
+
+
+#define P_EP(n) ((USB_EP_EVENT & (1 << (n))) ? USB_EndPoint##n : NULL)
+
+/* USB Endpoint Events Callback Pointers */
+void (* const USB_P_EP[USB_LOGIC_EP_NUM]) (uint32_t event) = {
+ P_EP(0),
+ P_EP(1),
+ P_EP(2),
+ P_EP(3),
+ P_EP(4),
+};
+
+
+/*
+ * USB Endpoint 1 Event Callback
+ * Called automatically on USB Endpoint 1 Event
+ * Parameter: event
+ */
+
+void USB_EndPoint1 (uint32_t event) {
+ uint16_t temp;
+ static uint16_t serialState;
+
+ switch (event) {
+ case USB_EVT_IN:
+ temp = CDC_GetSerialState();
+ if (serialState != temp) {
+ serialState = temp;
+ CDC_NotificationIn(); /* send SERIAL_STATE notification */
+ }
+ break;
+ }
+}
+
+
+/*
+ * USB Endpoint 2 Event Callback
+ * Called automatically on USB Endpoint 2 Event
+ * Parameter: event
+ */
+
+void USB_EndPoint2 (uint32_t event)
+{
+ event = event;
+}
+
+
+/*
+ * USB Endpoint 3 Event Callback
+ * Called automatically on USB Endpoint 3 Event
+ * Parameter: event
+ */
+
+void USB_EndPoint3 (uint32_t event) {
+ switch (event) {
+ case USB_EVT_OUT:
+ CDC_BulkOut (); /* data received from Host */
+ break;
+ case USB_EVT_IN:
+ CDC_BulkIn (); /* data expected from Host */
+ break;
+ }
+}
+
+
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: USBUSER.H
+ * Purpose: USB Custom User Definitions
+ * Version: V1.10
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2005-2009 Keil Software.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __USBUSER_H__
+#define __USBUSER_H__
+
+
+/* USB Device Events Callback Functions */
+extern void USB_Power_Event (uint32_t power);
+extern void USB_Reset_Event (void);
+extern void USB_Suspend_Event (void);
+extern void USB_Resume_Event (void);
+extern void USB_WakeUp_Event (void);
+extern void USB_SOF_Event (void);
+extern void USB_Error_Event (uint32_t error);
+
+/* USB Endpoint Callback Events */
+#define USB_EVT_SETUP 1 /* Setup Packet */
+#define USB_EVT_OUT 2 /* OUT Packet */
+#define USB_EVT_IN 3 /* IN Packet */
+#define USB_EVT_OUT_NAK 4 /* OUT Packet - Not Acknowledged */
+#define USB_EVT_IN_NAK 5 /* IN Packet - Not Acknowledged */
+#define USB_EVT_OUT_STALL 6 /* OUT Packet - Stalled */
+#define USB_EVT_IN_STALL 7 /* IN Packet - Stalled */
+
+/* USB Endpoint Events Callback Pointers */
+extern void (* const USB_P_EP[USB_LOGIC_EP_NUM])(uint32_t event);
+
+/* USB Endpoint Events Callback Functions */
+extern void USB_EndPoint0 (uint32_t event);
+extern void USB_EndPoint1 (uint32_t event);
+extern void USB_EndPoint2 (uint32_t event);
+extern void USB_EndPoint3 (uint32_t event);
+extern void USB_EndPoint4 (uint32_t event);
+
+/* USB Core Events Callback Functions */
+extern void USB_Configure_Event (void);
+extern void USB_Interface_Event (void);
+extern void USB_Feature_Event (void);
+
+
+#endif /* __USBUSER_H__ */
--- /dev/null
+/*----------------------------------------------------------------------------
+ * U S B - K e r n e l
+ *----------------------------------------------------------------------------
+ * Name: usb.h
+ * Purpose: USB Definitions
+ * Version: V1.20
+ *----------------------------------------------------------------------------
+ * This software is supplied "AS IS" without any warranties, express,
+ * implied or statutory, including but not limited to the implied
+ * warranties of fitness for purpose, satisfactory quality and
+ * noninfringement. Keil extends you a royalty-free right to reproduce
+ * and distribute executable files created using this software for use
+ * on NXP Semiconductors LPC microcontroller devices only. Nothing else
+ * gives you the right to use this software.
+ *
+ * Copyright (c) 2009 Keil - An ARM Company. All rights reserved.
+ *---------------------------------------------------------------------------*/
+
+#ifndef __USB_H__
+#define __USB_H__
+
+#include "sysdefs.h"
+
+typedef union
+{
+ uint16_t W;
+ struct
+ {
+ uint8_t L;
+ uint8_t H;
+ } __attribute__ ((packed)) WB;
+} __attribute__ ((packed)) WORD_BYTE;
+
+
+/* bmRequestType.Dir */
+#define REQUEST_HOST_TO_DEVICE 0
+#define REQUEST_DEVICE_TO_HOST 1
+
+/* bmRequestType.Type */
+#define REQUEST_STANDARD 0
+#define REQUEST_CLASS 1
+#define REQUEST_VENDOR 2
+#define REQUEST_RESERVED 3
+
+/* bmRequestType.Recipient */
+#define REQUEST_TO_DEVICE 0
+#define REQUEST_TO_INTERFACE 1
+#define REQUEST_TO_ENDPOINT 2
+#define REQUEST_TO_OTHER 3
+
+/* bmRequestType Definition */
+typedef union _REQUEST_TYPE
+{
+ struct _BM
+ {
+ uint8_t Recipient : 5;
+ uint8_t Type : 2;
+ uint8_t Dir : 1;
+ } __attribute__ ((packed)) BM;
+ uint8_t B;
+} __attribute__ ((packed)) REQUEST_TYPE;
+
+/* USB Standard Request Codes */
+#define USB_REQUEST_GET_STATUS 0
+#define USB_REQUEST_CLEAR_FEATURE 1
+#define USB_REQUEST_SET_FEATURE 3
+#define USB_REQUEST_SET_ADDRESS 5
+#define USB_REQUEST_GET_DESCRIPTOR 6
+#define USB_REQUEST_SET_DESCRIPTOR 7
+#define USB_REQUEST_GET_CONFIGURATION 8
+#define USB_REQUEST_SET_CONFIGURATION 9
+#define USB_REQUEST_GET_INTERFACE 10
+#define USB_REQUEST_SET_INTERFACE 11
+#define USB_REQUEST_SYNC_FRAME 12
+
+/* USB GET_STATUS Bit Values */
+#define USB_GETSTATUS_SELF_POWERED 0x01
+#define USB_GETSTATUS_REMOTE_WAKEUP 0x02
+#define USB_GETSTATUS_ENDPOINT_STALL 0x01
+
+/* USB Standard Feature selectors */
+#define USB_FEATURE_ENDPOINT_STALL 0
+#define USB_FEATURE_REMOTE_WAKEUP 1
+
+/* USB Default Control Pipe Setup Packet */
+typedef struct _USB_SETUP_PACKET
+{
+ REQUEST_TYPE bmRequestType;
+ uint8_t bRequest;
+ WORD_BYTE wValue;
+ WORD_BYTE wIndex;
+ uint16_t wLength;
+} __attribute__ ((packed)) USB_SETUP_PACKET;
+
+
+/* USB Descriptor Types */
+#define USB_DEVICE_DESCRIPTOR_TYPE 1
+#define USB_CONFIGURATION_DESCRIPTOR_TYPE 2
+#define USB_STRING_DESCRIPTOR_TYPE 3
+#define USB_INTERFACE_DESCRIPTOR_TYPE 4
+#define USB_ENDPOINT_DESCRIPTOR_TYPE 5
+#define USB_DEVICE_QUALIFIER_DESCRIPTOR_TYPE 6
+#define USB_OTHER_SPEED_CONFIG_DESCRIPTOR_TYPE 7
+#define USB_INTERFACE_POWER_DESCRIPTOR_TYPE 8
+#define USB_OTG_DESCRIPTOR_TYPE 9
+#define USB_DEBUG_DESCRIPTOR_TYPE 10
+#define USB_INTERFACE_ASSOCIATION_DESCRIPTOR_TYPE 11
+
+/* USB Device Classes */
+#define USB_DEVICE_CLASS_RESERVED 0x00
+#define USB_DEVICE_CLASS_AUDIO 0x01
+#define USB_DEVICE_CLASS_COMMUNICATIONS 0x02
+#define USB_DEVICE_CLASS_HUMAN_INTERFACE 0x03
+#define USB_DEVICE_CLASS_MONITOR 0x04
+#define USB_DEVICE_CLASS_PHYSICAL_INTERFACE 0x05
+#define USB_DEVICE_CLASS_POWER 0x06
+#define USB_DEVICE_CLASS_PRINTER 0x07
+#define USB_DEVICE_CLASS_STORAGE 0x08
+#define USB_DEVICE_CLASS_HUB 0x09
+#define USB_DEVICE_CLASS_MISCELLANEOUS 0xEF
+#define USB_DEVICE_CLASS_VENDOR_SPECIFIC 0xFF
+
+/* bmAttributes in Configuration Descriptor */
+#define USB_CONFIG_POWERED_MASK 0x40
+#define USB_CONFIG_BUS_POWERED 0x80
+#define USB_CONFIG_SELF_POWERED 0xC0
+#define USB_CONFIG_REMOTE_WAKEUP 0x20
+
+/* bMaxPower in Configuration Descriptor */
+#define USB_CONFIG_POWER_MA(mA) ((mA)/2)
+
+/* bEndpointAddress in Endpoint Descriptor */
+#define USB_ENDPOINT_DIRECTION_MASK 0x80
+#define USB_ENDPOINT_OUT(addr) ((addr) | 0x00)
+#define USB_ENDPOINT_IN(addr) ((addr) | 0x80)
+
+/* bmAttributes in Endpoint Descriptor */
+#define USB_ENDPOINT_TYPE_MASK 0x03
+#define USB_ENDPOINT_TYPE_CONTROL 0x00
+#define USB_ENDPOINT_TYPE_ISOCHRONOUS 0x01
+#define USB_ENDPOINT_TYPE_BULK 0x02
+#define USB_ENDPOINT_TYPE_INTERRUPT 0x03
+#define USB_ENDPOINT_SYNC_MASK 0x0C
+#define USB_ENDPOINT_SYNC_NO_SYNCHRONIZATION 0x00
+#define USB_ENDPOINT_SYNC_ASYNCHRONOUS 0x04
+#define USB_ENDPOINT_SYNC_ADAPTIVE 0x08
+#define USB_ENDPOINT_SYNC_SYNCHRONOUS 0x0C
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FEEDBACK 0x20
+#define USB_ENDPOINT_USAGE_RESERVED 0x30
+
+/* USB Standard Device Descriptor */
+typedef struct _USB_DEVICE_DESCRIPTOR
+{
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint16_t bcdUSB;
+ uint8_t bDeviceClass;
+ uint8_t bDeviceSubClass;
+ uint8_t bDeviceProtocol;
+ uint8_t bMaxPacketSize0;
+ uint16_t idVendor;
+ uint16_t idProduct;
+ uint16_t bcdDevice;
+ uint8_t iManufacturer;
+ uint8_t iProduct;
+ uint8_t iSerialNumber;
+ uint8_t bNumConfigurations;
+} __attribute__ ((packed)) USB_DEVICE_DESCRIPTOR;
+
+/* USB 2.0 Device Qualifier Descriptor */
+typedef struct _USB_DEVICE_QUALIFIER_DESCRIPTOR
+{
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint16_t bcdUSB;
+ uint8_t bDeviceClass;
+ uint8_t bDeviceSubClass;
+ uint8_t bDeviceProtocol;
+ uint8_t bMaxPacketSize0;
+ uint8_t bNumConfigurations;
+ uint8_t bReserved;
+} __attribute__ ((packed)) USB_DEVICE_QUALIFIER_DESCRIPTOR;
+
+/* USB Standard Configuration Descriptor */
+typedef struct _USB_CONFIGURATION_DESCRIPTOR
+{
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint16_t wTotalLength;
+ uint8_t bNumInterfaces;
+ uint8_t bConfigurationValue;
+ uint8_t iConfiguration;
+ uint8_t bmAttributes;
+ uint8_t bMaxPower;
+} __attribute__ ((packed)) USB_CONFIGURATION_DESCRIPTOR;
+
+/* USB Standard Interface Descriptor */
+typedef struct _USB_INTERFACE_DESCRIPTOR
+{
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint8_t bInterfaceNumber;
+ uint8_t bAlternateSetting;
+ uint8_t bNumEndpoints;
+ uint8_t bInterfaceClass;
+ uint8_t bInterfaceSubClass;
+ uint8_t bInterfaceProtocol;
+ uint8_t iInterface;
+} __attribute__ ((packed)) USB_INTERFACE_DESCRIPTOR;
+
+/* USB Standard Endpoint Descriptor */
+typedef struct _USB_ENDPOINT_DESCRIPTOR
+{
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint8_t bEndpointAddress;
+ uint8_t bmAttributes;
+ uint16_t wMaxPacketSize;
+ uint8_t bInterval;
+} __attribute__ ((packed)) USB_ENDPOINT_DESCRIPTOR;
+
+/* USB String Descriptor */
+typedef struct _USB_STRING_DESCRIPTOR
+{
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint16_t bString/*[]*/;
+} __attribute__ ((packed)) USB_STRING_DESCRIPTOR;
+
+/* USB Common Descriptor */
+typedef struct _USB_COMMON_DESCRIPTOR
+{
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+} __attribute__ ((packed)) USB_COMMON_DESCRIPTOR;
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file usbconfig.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "usb.h"
+#include "usbconfig.h"
+
+#ifndef WBVAL
+#define WBVAL(x) ((x) & 0xFF),(((x) >> 8) & 0xFF)
+#endif
+
+/* USB String Descriptor (optional) */
+const uint8_t USB_HIDStringDescriptor[] =
+{
+ /* Index 0x00: LANGID Codes */
+ 0x04, /* bLength */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ WBVAL(0x0409), /* US English */ /* wLANGID */
+ /* Index 0x04: Manufacturer */
+ 0x1C, /* bLength */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ 'm',0,
+ 'i',0,
+ 'c',0,
+ 'r',0,
+ 'o',0,
+ 'B',0,
+ 'u',0,
+ 'i',0,
+ 'l',0,
+ 'd',0,
+ 'e',0,
+ 'r',0,
+ ' ',0,
+ /* Index 0x20: Product */
+ 0x28, /* bLength */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ 'L',0,
+ 'P',0,
+ 'C',0,
+ '1',0,
+ '3',0,
+ '4',0,
+ '3',0,
+ ' ',0,
+ 'R',0,
+ 'e',0,
+ 'f',0,
+ '.',0,
+ ' ',0,
+ 'B',0,
+ 'o',0,
+ 'a',0,
+ 'r',0,
+ 'd',0,
+ ' ',0,
+ /* Index 0x48: Serial Number */
+ 0x1A, /* bLength */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ '0',0,
+ /* Index 0x62: Interface 0, Alternate Setting 0 */
+ 0x0E, /* bLength */
+ USB_STRING_DESCRIPTOR_TYPE, /* bDescriptorType */
+ 'H',0,
+ 'I',0,
+ 'D',0,
+ ' ',0,
+ ' ',0,
+ ' ',0,
+};
--- /dev/null
+/**************************************************************************/
+/*!
+ @file usbconfig.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _USBCONFIG_H_
+#define _USBCONFIG_H_
+
+#include "projectconfig.h"
+
+#define USB_VENDOR_ID CFG_USB_VID // Vendor ID
+#define USB_PROD_ID CFG_USB_PID // Product ID
+#define USB_DEVICE 0x0100 // Device ID
+
+#define WBVAL(x) ((x) & 0xFF),(((x) >> 8) & 0xFF)
+
+#define USB_DEVICE_DESC_SIZE (sizeof(USB_DEVICE_DESCRIPTOR))
+#define USB_CONFIGUARTION_DESC_SIZE (sizeof(USB_CONFIGURATION_DESCRIPTOR))
+#define USB_INTERFACE_DESC_SIZE (sizeof(USB_INTERFACE_DESCRIPTOR))
+#define USB_ENDPOINT_DESC_SIZE (sizeof(USB_ENDPOINT_DESCRIPTOR))
+
+#define HID_DESC_OFFSET 0x0012
+#define HID_DESC_SIZE (sizeof(HID_DESCRIPTOR))
+#define HID_REPORT_DESC_SIZE (sizeof(HID_ReportDescriptor))
+
+extern const uint8_t USB_DeviceDescriptor[];
+extern const uint8_t USB_ConfigDescriptor[];
+extern const uint8_t USB_HIDStringDescriptor[];
+
+extern const uint8_t HID_ReportDescriptor[];
+extern const uint16_t HID_ReportDescSize;
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file usbhid.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "core/usbhid-rom/usb.h"
+#include "core/usbhid-rom/usbconfig.h"
+#include "core/rom_drivers.h"
+#include "core/gpio/gpio.h"
+#include "core/adc/adc.h"
+#include "core/systick/systick.h"
+
+#include "usbhid.h"
+
+USB_DEV_INFO DeviceInfo;
+HID_DEVICE_INFO HidDevInfo;
+ROM ** rom = (ROM **)0x1fff1ff8;
+
+typedef struct usbhid_out_s
+{
+ uint16_t gpio1Dir;
+ uint16_t gpio1Data;
+ uint16_t gpio2Dir;
+ uint16_t gpio2Data;
+ uint16_t gpio3Dir;
+ uint16_t gpio3Data;
+ uint16_t adc0;
+ uint16_t adc1;
+ uint16_t adc2;
+ uint16_t adc3;
+ uint32_t systicks;
+ uint32_t rollovers;
+} usbhid_out_t;
+
+/**************************************************************************/
+/*!
+ @brief Gets the HID In Report (the report going from the LPC1343 to
+ the USB host)
+*/
+/**************************************************************************/
+void usbHIDGetInReport (uint8_t src[], uint32_t length)
+{
+ usbhid_out_t out;
+
+ out.gpio1Dir = GPIO_GPIO1DIR;
+ out.gpio1Data = GPIO_GPIO1DATA;
+ out.gpio2Dir = GPIO_GPIO2DIR;
+ out.gpio2Data = GPIO_GPIO2DATA;
+ out.gpio3Dir = GPIO_GPIO3DIR;
+ out.gpio3Data = GPIO_GPIO3DATA;
+ out.adc0 = adcRead(0);
+ out.adc1 = adcRead(1);
+ out.adc2 = adcRead(2);
+ out.adc3 = adcRead(3);
+ out.systicks = systickGetTicks();
+ out.rollovers = systickGetRollovers();
+
+ size_t i = 0;
+ memcpy(&src[i], &out.gpio1Dir, sizeof out.gpio1Dir);
+ i += sizeof out.gpio1Dir;
+ memcpy(&src[i], &out.gpio1Data, sizeof out.gpio1Data);
+ i += sizeof out.gpio1Data;
+ memcpy(&src[i], &out.gpio2Dir, sizeof out.gpio2Dir);
+ i += sizeof out.gpio2Dir;
+ memcpy(&src[i], &out.gpio2Data, sizeof out.gpio2Data);
+ i += sizeof out.gpio2Data;
+ memcpy(&src[i], &out.gpio3Dir, sizeof out.gpio3Dir);
+ i += sizeof out.gpio3Dir;
+ memcpy(&src[i], &out.gpio3Data, sizeof out.gpio3Data);
+ i += sizeof out.gpio3Data;
+ memcpy(&src[i], &out.adc0, sizeof out.adc0);
+ i += sizeof out.adc0;
+ memcpy(&src[i], &out.adc1, sizeof out.adc1);
+ i += sizeof out.adc1;
+ memcpy(&src[i], &out.adc2, sizeof out.adc2);
+ i += sizeof out.adc2;
+ memcpy(&src[i], &out.adc3, sizeof out.adc3);
+ i += sizeof out.adc3;
+ memcpy(&src[i], &out.systicks, sizeof out.systicks);
+ i += sizeof out.systicks;
+ memcpy(&src[i], &out.rollovers, sizeof out.rollovers);
+ i += sizeof out.rollovers;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the HID Out Report (the report coming in from the USB
+ host to the LPC1343).
+*/
+/**************************************************************************/
+void usbHIDSetOutReport (uint8_t dst[], uint32_t length)
+{
+ uint8_t PCOutReportData = dst[0];
+ // Check bit 0 in the incoming report to determine is LED should
+ // be enabled or disabled (1 = enabled, 0 = disabled)
+ if (PCOutReportData & (1<<0))
+ {
+ // Enable LED (set low)
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, 0);
+ }
+ else
+ {
+ // Disable LED (set high)
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, 1);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the USB port
+
+ The ROM-based USB HID code is capable of configuring the PLL and pins
+ for USB, but there seems to be a bug in the code that sets the system
+ clock to 48MHz (normally the USB and System clocks can be configured
+ seperately). As such, this code does not use the "init_clk_pins()"
+ function in the rom, and the USB clock and pins are manually
+ configured.
+*/
+/**************************************************************************/
+void usbHIDInit (void)
+{
+ // Setup USB clock
+ SCB_PDRUNCFG &= ~(SCB_PDSLEEPCFG_USBPAD_PD); // Power-up USB PHY
+ SCB_PDRUNCFG &= ~(SCB_PDSLEEPCFG_USBPLL_PD); // Power-up USB PLL
+
+ SCB_USBPLLCLKSEL = SCB_USBPLLCLKSEL_SOURCE_MAINOSC; // Select PLL Input
+ SCB_USBPLLCLKUEN = SCB_USBPLLCLKUEN_UPDATE; // Update Clock Source
+ SCB_USBPLLCLKUEN = SCB_USBPLLCLKUEN_DISABLE; // Toggle Update Register
+ SCB_USBPLLCLKUEN = SCB_USBPLLCLKUEN_UPDATE;
+
+ // Wait until the USB clock is updated
+ while (!(SCB_USBPLLCLKUEN & SCB_USBPLLCLKUEN_UPDATE));
+
+ // Set USB clock to 48MHz (12MHz x 4)
+ SCB_USBPLLCTRL = (SCB_USBPLLCTRL_MULT_4);
+ while (!(SCB_USBPLLSTAT & SCB_USBPLLSTAT_LOCK)); // Wait Until PLL Locked
+ SCB_USBCLKSEL = SCB_USBCLKSEL_SOURCE_USBPLLOUT;
+
+ // Set USB pin functions
+ IOCON_PIO0_1 &= ~IOCON_PIO0_1_FUNC_MASK;
+ IOCON_PIO0_1 |= IOCON_PIO0_1_FUNC_CLKOUT; // CLK OUT
+ IOCON_PIO0_3 &= ~IOCON_PIO0_3_FUNC_MASK;
+ IOCON_PIO0_3 |= IOCON_PIO0_3_FUNC_USB_VBUS; // VBus
+ IOCON_PIO0_6 &= ~IOCON_PIO0_6_FUNC_MASK;
+ IOCON_PIO0_6 |= IOCON_PIO0_6_FUNC_USB_CONNECT; // Soft Connect
+
+ // Disable internal resistor on VBUS (0.3)
+ gpioSetPullup(&IOCON_PIO0_3, gpioPullupMode_Inactive);
+
+ // HID Device Info
+ volatile int n;
+ HidDevInfo.idVendor = USB_VENDOR_ID;
+ HidDevInfo.idProduct = USB_PROD_ID;
+ HidDevInfo.bcdDevice = USB_DEVICE;
+ HidDevInfo.StrDescPtr = (uint32_t)&USB_HIDStringDescriptor[0];
+ HidDevInfo.InReportCount = sizeof(usbhid_out_t);
+ HidDevInfo.OutReportCount = 1;
+ HidDevInfo.SampleInterval = 0x20;
+ HidDevInfo.InReport = usbHIDGetInReport;
+ HidDevInfo.OutReport = usbHIDSetOutReport;
+
+ DeviceInfo.DevType = USB_DEVICE_CLASS_HUMAN_INTERFACE;
+ DeviceInfo.DevDetailPtr = (uint32_t)&HidDevInfo;
+
+ /* Enable Timer32_1, IOCON, and USB blocks (for USB ROM driver) */
+ SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT32B1 | SCB_SYSAHBCLKCTRL_IOCON | SCB_SYSAHBCLKCTRL_USB_REG);
+
+ /* Use pll and pin init function in rom */
+ /* Warning: This will also set the system clock to 48MHz! */
+ // (*rom)->pUSBD->init_clk_pins();
+
+ /* insert a delay between clk init and usb init */
+ for (n = 0; n < 75; n++) {__asm("nop");}
+
+ (*rom)->pUSBD->init(&DeviceInfo); /* USB Initialization */
+ (*rom)->pUSBD->connect(true); /* USB Connect */
+}
+
+/**************************************************************************/
+/*!
+ @brief Passes the USB interrupt to the internal ROM-based handler
+*/
+/**************************************************************************/
+#ifdef CFG_USBHID
+void USB_IRQHandler()
+{
+ (*rom)->pUSBD->isr();
+}
+#endif
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file usbhid.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _USBCONFIG_H_
+#define _USBCONFIG_H_
+
+#include "projectconfig.h"
+
+void usbHIDGetInReport (uint8_t src[], uint32_t length);
+void usbHIDSetOutReport (uint8_t dst[], uint32_t length);
+void usbHIDInit (void);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file wdt.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Sets up the watchdog timer (WDT). The WDT allows you to monitor
+ whether the device is still executing properly. If the watchdog
+ isn't 'fed' within a pre-determined delay, it will raise an interrupt
+ allowing you to decide if you want to reset the device, etc.
+
+ @code
+ #include "core/cpu/cpu.h"
+ #include "core/wdt/wdt.h"
+ ...
+ cpuInit();
+
+ // Initialise wdt with no reset on timeout
+ wdtInit(false);
+
+ // Pat the watchdog (to start the timer)
+ wdtFeed();
+
+ while (1)
+ {
+ // Keep the watchdog happy by regularly feeding it
+ wdtFeed();
+ }
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "wdt.h"
+
+#define WDT_FEED_VALUE (0x003FFFFF)
+
+volatile uint32_t wdt_counter;
+
+/**************************************************************************/
+/*!
+ IRQ Handler when the watchdog times out. Any actions that you wish
+ to take when a timeout occurs should be called from here.
+*/
+/**************************************************************************/
+void WDT_IRQHandler(void)
+{
+ /* Clear the time-out interrupt flag */
+ WDT_WDMOD &= ~WDT_WDMOD_WDTOF;
+ wdt_counter++;
+}
+
+/**************************************************************************/
+/*!
+ Setup the clock for the watchdog timer. The default setting is 250kHz.
+*/
+/**************************************************************************/
+static void wdtClockSetup (void)
+{
+ /* Watchdog Configuration */
+ /* Freq. = 0.5MHz, div = 2: WDT_OSC = 250kHz */
+ SCB_WDTOSCCTRL = SCB_WDTOSCCTRL_FREQSEL_0_5MHZ |
+ SCB_WDTOSCCTRL_DIVSEL_DIV2;
+
+ /* Set clock source (use WDT oscillator) */
+ SCB_WDTCLKSEL = SCB_WDTCLKSEL_SOURCE_WATCHDOGOSC;
+ SCB_WDTCLKUEN = SCB_WDTCLKUEN_UPDATE;
+ SCB_WDTCLKUEN = SCB_WDTCLKUEN_DISABLE;
+ SCB_WDTCLKUEN = SCB_WDTCLKUEN_UPDATE;
+
+ /* Wait until updated */
+ while (!(SCB_WDTCLKUEN & SCB_WDTCLKUEN_UPDATE));
+
+ /* Set divider */
+ SCB_WDTCLKDIV = SCB_WDTCLKDIV_DIV1;
+
+ /* Enable WDT clock */
+ SCB_PDRUNCFG &= ~(SCB_PDRUNCFG_WDTOSC);
+}
+
+/**************************************************************************/
+/*!
+ Initialises the watchdog timer and sets up the interrupt.
+*/
+/**************************************************************************/
+void wdtInit (bool reset)
+{
+ /* Setup the WDT clock */
+ wdtClockSetup();
+
+ /* Enable AHB clock to the WDT domain. */
+ SCB_SYSAHBCLKCTRL |= SCB_SYSAHBCLKCTRL_WDT;
+
+ wdt_counter = 0;
+
+ /* Enable the WDT interrupt */
+ NVIC_EnableIRQ(WDT_IRQn);
+
+ /* Set timeout value (must be at least 0x000000FF) */
+ WDT_WDTC = WDT_FEED_VALUE;
+
+ /* Enable the watchdog timer (without system reset) */
+ WDT_WDMOD = WDT_WDMOD_WDEN_ENABLED |
+ reset ? WDT_WDMOD_WDRESET_ENABLED : WDT_WDMOD_WDRESET_DISABLED ;
+}
+
+/**************************************************************************/
+/*!
+ Feeds the watchdog to keep it from timing out. Interrupts will be
+ disabled while feeding the watchdog.
+*/
+/**************************************************************************/
+void wdtFeed (void)
+{
+ /* Pet the watchdog */
+ __disable_irq();
+ WDT_WDFEED = WDT_WDFEED_FEED1;
+ WDT_WDFEED = WDT_WDFEED_FEED2;
+ __enable_irq();
+}
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file wdt.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _WDT_H_
+#define _WDT_H_
+
+#include "projectconfig.h"
+
+void wdtInit (bool reset);
+void wdtFeed (void);
+
+#endif
\ No newline at end of file
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+#include <stdio.h>
+#include <string.h>
+
+#include "chb.h"
+#include "chb_drvr.h"
+#include "chb_buf.h"
+
+static chb_pcb_t pcb;
+// these are for the duplicate checking and rejection
+static U8 prev_seq = 0xFF;
+static U16 prev_src_addr = 0xFFFE;
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_init()
+{
+ memset(&pcb, 0, sizeof(chb_pcb_t));
+ pcb.src_addr = chb_get_short_addr();
+ chb_drvr_init();
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+chb_pcb_t *chb_get_pcb()
+{
+ return &pcb;
+}
+
+/**************************************************************************/
+/*!
+ Requires the dest addr, location to store data, and len of payload.
+ Returns the length of the hdr.
+*/
+/**************************************************************************/
+static U8 chb_gen_hdr(U8 *hdr, U16 addr, U8 len)
+{
+ U8 *hdr_ptr = hdr;
+
+ // calc frame size and put in 0 position of array
+ // frame size = hdr sz + payload len + fcs len
+ *hdr_ptr++ = CHB_HDR_SZ + len + CHB_FCS_LEN;
+
+ // use default fcf byte 0 val but test for ack request. we won't request
+ // ack if broadcast. all other cases we will.
+ *hdr_ptr++ = CHB_FCF_BYTE_0 | ((addr != 0xFFFF) << CHB_ACK_REQ_POS);
+ *hdr_ptr++ = CHB_FCF_BYTE_1;
+
+ *hdr_ptr++ = pcb.seq++;
+
+ // fill out dest pan ID, dest addr, src addr
+ *(U16 *)hdr_ptr = CFG_CHIBI_PANID;
+ hdr_ptr += sizeof(U16);
+ *(U16 *)hdr_ptr = addr;
+ hdr_ptr += sizeof(U16);
+ *(U16 *)hdr_ptr = pcb.src_addr;
+ hdr_ptr += sizeof(U16);
+
+ // return the len of the header
+ return hdr_ptr - hdr;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+U8 chb_write(U16 addr, U8 *data, U8 len)
+{
+ U8 status, frm_len, hdr_len, hdr[CHB_HDR_SZ + 1];
+
+ while (len > 0)
+ {
+ // calculate which frame len to use. if greater than max payload, split
+ // up operation.
+ frm_len = (len > CHB_MAX_PAYLOAD) ? CHB_MAX_PAYLOAD : len;
+
+ // gen frame header
+ hdr_len = chb_gen_hdr(hdr, addr, frm_len);
+
+ // send data to chip
+ status = chb_tx(hdr, data, frm_len);
+
+ if (status != CHB_SUCCESS)
+ {
+ switch (status)
+ {
+ case RADIO_SUCCESS:
+ // fall through
+ case CHB_SUCCESS_DATA_PENDING:
+ pcb.txd_success++;
+ break;
+
+ case CHB_NO_ACK:
+ pcb.txd_noack++;
+ break;
+
+ case CHB_CHANNEL_ACCESS_FAILURE:
+ pcb.txd_channel_fail++;
+ break;
+
+ default:
+ break;
+ }
+ return status;
+ }
+
+ // adjust len and restart
+ len = len - frm_len;
+ }
+ return CHB_SUCCESS;
+}
+
+/**************************************************************************/
+/*!
+ Read data from the buffer. Need to pass in a buffer of at leasts max frame
+ size and two 16-bit containers for the src and dest addresses.
+
+ The read function will automatically populate the addresses and the data with
+ the frm payload. It will then return the len of the payload.
+*/
+/**************************************************************************/
+U8 chb_read(chb_rx_data_t *rx)
+{
+ U8 i, len, seq, *data_ptr;
+
+ data_ptr = rx->data;
+
+ // first byte is always len. check it to make sure
+ // we have a valid len byte.
+ if ((len = chb_buf_read()) > CHB_MAX_FRAME_LENGTH)
+ {
+ return 0;
+ }
+ *data_ptr++ = len;
+
+ // load the rest of the data into buffer
+ for (i=0; i<len; i++)
+ {
+ *data_ptr++ = chb_buf_read();
+ }
+
+ // we're using the buffer that's fed in as an argument as a temp
+ // buffer as well to save resources.
+ // we'll use it as temp storage to parse the frame. then move the frame
+ // down so that only the payload will be in the buffer.
+
+ // extract the sequence number
+ data_ptr = rx->data + 3; // location of sequence number
+ seq = *data_ptr;
+
+ // parse the buffer and extract the dest and src addresses
+ data_ptr = rx->data + 6; // location of dest addr
+ rx->dest_addr = *(U16 *)data_ptr;
+ data_ptr += sizeof(U16);
+ rx->src_addr = *(U16 *)data_ptr;
+ data_ptr += sizeof(U16);
+
+ // if the data in the rx buf is 0, then clear the rx_flag. otherwise, keep it raised
+ if (!chb_buf_get_len())
+ {
+ pcb.data_rcv = false;
+ }
+
+#if (CFG_CHIBI_PROMISCUOUS == 1)
+ // if we're in promiscuous mode, we don't want to do any duplicate rejection and we don't want to move the payload
+ // to the front of the buffer. We want to capture the full frame so just keep the frame intact and return the length.
+ return len;
+#else
+ // duplicate frame check (dupe check). we want to remove frames that have been already been received since they
+ // are just retries.
+ // note: this dupe check only removes duplicate frames from the previous transfer. if another frame from a different
+ // node comes in between the dupes, then the dupe will show up as a received frame.
+ if ((seq == prev_seq) && (rx->src_addr == prev_src_addr))
+ {
+ // this is a duplicate frame from a retry. the remote node thinks we didn't receive
+ // it properly. discard.
+ return 0;
+ }
+ else
+ {
+ prev_seq = seq;
+ prev_src_addr = rx->src_addr;
+ }
+
+ // move the payload down to the beginning of the data buffer
+ memmove(rx->data, data_ptr, len - CHB_HDR_SZ);
+ // finally, return the len of the payload
+ return len - CHB_HDR_SZ - CHB_FCS_LEN;
+#endif
+}
+
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+#ifndef CHIBI_H
+#define CHIBI_H
+
+#include "types.h"
+
+#define CHB_HDR_SZ 9 // FCF + seq + pan_id + dest_addr + src_addr (2 + 1 + 2 + 2 + 2)
+#define CHB_FCS_LEN 2
+#define CHB_MAX_PAYLOAD 100
+
+
+// frame_type = data
+// security enabled = false
+// frame pending = false
+// ack request = false
+// pan ID compression = true
+#define CHB_FCF_BYTE_0 0x41
+
+// dest addr = 16-bit
+// frame version = 802.15.4 (not 2003)
+// src addr = 16-bit
+#define CHB_FCF_BYTE_1 0x98
+
+#define CHB_ACK_REQ_POS 5
+
+enum
+{
+ CHB_SUCCESS = 0,
+ CHB_SUCCESS_DATA_PENDING = 1,
+ CHB_CHANNEL_ACCESS_FAILURE = 3,
+ CHB_NO_ACK = 5,
+ CHB_INVALID = 7
+};
+
+// Chibi Protocol control block
+typedef struct
+{
+ U16 src_addr;
+ U8 seq;
+ volatile bool data_rcv;
+ volatile bool tx_end;
+
+ // stats
+ U16 rcvd_xfers;
+ U16 txd_success;
+ U16 txd_noack;
+ U16 txd_channel_fail;
+ U16 overflow;
+ U16 underrun;
+ U8 battlow;
+ U8 ed;
+ U8 crc;
+} chb_pcb_t;
+
+typedef struct
+{
+ U8 len;
+ U16 src_addr;
+ U16 dest_addr;
+ U8 data[CHB_MAX_PAYLOAD];
+} chb_rx_data_t;
+
+void chb_init();
+chb_pcb_t *chb_get_pcb();
+U8 chb_write(U16 addr, U8 *data, U8 len);
+U8 chb_read(chb_rx_data_t *rx);
+
+#endif
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+#include <stdio.h>
+#include "chb_buf.h"
+#include "projectconfig.h"
+
+static U8 chb_buf[CFG_CHIBI_BUFFERSIZE];
+static volatile U32 rd_ptr, wr_ptr;
+static volatile U32 len;
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_buf_init()
+{
+ rd_ptr = 0;
+ wr_ptr = 0;
+ len = 0;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_buf_write(U8 data)
+{
+ chb_buf[wr_ptr] = data;
+ wr_ptr = (wr_ptr + 1) % CFG_CHIBI_BUFFERSIZE;
+ len++;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+U8 chb_buf_read()
+{
+ U8 data;
+
+ data = chb_buf[rd_ptr];
+ rd_ptr = (rd_ptr + 1) % CFG_CHIBI_BUFFERSIZE;
+ len--;
+ return data;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+U32 chb_buf_get_len()
+{
+ return len;
+}
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+#ifndef CHB_BUF_H
+#define CHB_BUF_H
+
+#include "types.h"
+
+void chb_buf_init();
+void chb_buf_write(U8 data);
+U8 chb_buf_read();
+U32 chb_buf_get_len();
+
+#endif
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+#include <stdio.h>
+#include "chb.h"
+#include "chb_drvr.h"
+#include "chb_buf.h"
+#include "chb_spi.h"
+#include "chb_eeprom.h"
+
+#include "core/systick/systick.h"
+#include "core/timer16/timer16.h"
+
+// store string messages in flash rather than RAM
+const char chb_err_overflow[] = "BUFFER FULL. TOSSING INCOMING DATA\r\n";
+const char chb_err_init[] = "RADIO NOT INITIALIZED PROPERLY\r\n";
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+static U8 chb_get_state()
+{
+ return chb_reg_read(TRX_STATUS) & 0x1f;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+static U8 chb_get_status()
+{
+ return chb_reg_read(TRX_STATE) >> CHB_TRAC_STATUS_POS;
+}
+
+/**************************************************************************/
+/*!
+ Cause a blocking delay for x microseconds
+*/
+/**************************************************************************/
+static void chb_delay_us(U16 usec)
+{
+ // Determine maximum delay using a 16 bit timer
+ // ToDo: Move this to a macro or fixed value!
+ uint32_t maxus = 0xFFFF / (CFG_CPU_CCLK / 1000000);
+
+ // Check if delay can be done in one operation
+ if (usec <= maxus)
+ {
+ timer16DelayUS(0, usec);
+ return;
+ }
+
+ // Split delay into several steps (to stay within limit of 16-bit timer)
+ do
+ {
+ if (usec >= maxus)
+ {
+ timer16DelayUS(0, maxus);
+ usec -= maxus;
+ }
+ else
+ {
+ timer16DelayUS(0, usec);
+ usec = 0;
+ }
+ } while (usec > 0);
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_reset()
+{
+ CHB_RST_DISABLE();
+ CHB_SLPTR_DISABLE();
+
+ // wait a bit while transceiver wakes up
+ chb_delay_us(TIME_P_ON_TO_CLKM_AVAIL);
+
+ // reset the device
+ CHB_RST_ENABLE();
+ chb_delay_us(TIME_RST_PULSE_WIDTH);
+ CHB_RST_DISABLE();
+
+ // check that we have the part number that we're expecting
+ while (1)
+ {
+ // if you're stuck in this loop, that means that you're not reading
+ // the version and part number register correctly. possible that version number
+ // changes. if so, update version num in header file
+ if ((chb_reg_read(VERSION_NUM) == CHB_AT86RF212_VER_NUM) && (chb_reg_read(PART_NUM) == CHB_AT86RF212_PART_NUM))
+ {
+ break;
+ }
+ }
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+U8 chb_reg_read(U8 addr)
+{
+ U8 val = 0;
+
+ /* Add the register read command to the register address. */
+ addr |= 0x80;
+
+ CHB_ENTER_CRIT();
+ CHB_SPI_ENABLE();
+
+ /*Send Register address and read register content.*/
+ val = chb_xfer_byte(addr);
+ val = chb_xfer_byte(val);
+
+ CHB_SPI_DISABLE();
+ CHB_LEAVE_CRIT();
+
+ return val;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+U16 chb_reg_read16(U8 addr)
+{
+ U8 i;
+ U16 val = 0;
+
+ for (i=0; i<2; i++)
+ {
+ addr |= chb_reg_read(addr + i) << (8 * i);
+ }
+ return val;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_reg_write(U8 addr, U8 val)
+{
+ U8 dummy;
+
+ /* Add the Register Write command to the address. */
+ addr |= 0xC0;
+
+ CHB_ENTER_CRIT();
+ CHB_SPI_ENABLE();
+
+ /*Send Register address and write register content.*/
+ dummy = chb_xfer_byte(addr);
+ dummy = chb_xfer_byte(val);
+
+ CHB_SPI_DISABLE();
+ CHB_LEAVE_CRIT();
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_reg_write16(U8 addr, U16 val)
+{
+ U8 i;
+
+ for (i=0; i<2; i++)
+ {
+ chb_reg_write(addr + i, val >> (8 * i));
+ }
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_reg_write64(U8 addr, U8 *val)
+{
+ U8 i;
+
+ for (i=0; i<8; i++)
+ {
+ chb_reg_write(addr + i, *(val + i));
+ }
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_reg_read_mod_write(U8 addr, U8 val, U8 mask)
+{
+ U8 tmp;
+
+ tmp = chb_reg_read(addr);
+ val &= mask; // mask off stray bits from val
+ tmp &= ~mask; // mask off bits in reg val
+ tmp |= val; // copy val into reg val
+ chb_reg_write(addr, tmp); // write back to reg
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_frame_write(U8 *hdr, U8 hdr_len, U8 *data, U8 data_len)
+{
+ U8 i, dummy;
+
+ // dont allow transmission longer than max frame size
+ if ((hdr_len + data_len) > 127)
+ {
+ return;
+ }
+
+ // initiate spi transaction
+ CHB_ENTER_CRIT();
+ CHB_SPI_ENABLE();
+
+ // send fifo write command
+ dummy = chb_xfer_byte(CHB_SPI_CMD_FW);
+
+ // write hdr contents to fifo
+ for (i=0; i<hdr_len; i++)
+ {
+ dummy = chb_xfer_byte(*hdr++);
+ }
+
+ // write data contents to fifo
+ for (i=0; i<data_len; i++)
+ {
+ dummy = chb_xfer_byte(*data++);
+ }
+
+ // terminate spi transaction
+ CHB_SPI_DISABLE();
+ CHB_LEAVE_CRIT();
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+static void chb_frame_read()
+{
+ U8 i, len, data;
+
+ // CHB_ENTER_CRIT();
+ CHB_SPI_ENABLE();
+
+ /*Send frame read command and read the length.*/
+ chb_xfer_byte(CHB_SPI_CMD_FR);
+ len = chb_xfer_byte(0);
+
+ /*Check for correct frame length.*/
+ if ((len >= CHB_MIN_FRAME_LENGTH) && (len <= CHB_MAX_FRAME_LENGTH))
+ {
+ // check to see if there is room to write the frame in the buffer. if not, then drop it
+ if (len < (CFG_CHIBI_BUFFERSIZE - chb_buf_get_len()))
+ {
+ chb_buf_write(len);
+
+ for (i=0; i<len; i++)
+ {
+ data = chb_xfer_byte(0);
+ chb_buf_write(data);
+ }
+ }
+ else
+ {
+ // we've overflowed the buffer. toss the data and do some housekeeping
+ chb_pcb_t *pcb = chb_get_pcb();
+
+ // read out the data and throw it away
+ for (i=0; i<len; i++)
+ {
+ data = chb_xfer_byte(0);
+ }
+
+ // Increment the overflow stat
+ pcb->overflow++;
+
+ // print the error message
+ printf(chb_err_overflow);
+ }
+ }
+
+ CHB_SPI_DISABLE();
+ CHB_LEAVE_CRIT();
+}
+
+/**************************************************************************/
+/*!
+ Read directly from the SRAM on the radio. This is only used for debugging
+ purposes.
+*/
+/**************************************************************************/
+#ifdef CHB_DEBUG
+void chb_sram_read(U8 addr, U8 len, U8 *data)
+{
+ U8 i, dummy;
+
+ CHB_ENTER_CRIT();
+ CHB_SPI_ENABLE();
+
+ /*Send SRAM read command.*/
+ dummy = chb_xfer_byte(CHB_SPI_CMD_SR);
+
+ /*Send address where to start reading.*/
+ dummy = chb_xfer_byte(addr);
+
+ for (i=0; i<len; i++)
+ {
+ *data++ = chb_xfer_byte(0);
+ }
+
+ CHB_SPI_DISABLE();
+ CHB_LEAVE_CRIT();
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_sram_write(U8 addr, U8 len, U8 *data)
+{
+ U8 i, dummy;
+
+ CHB_ENTER_CRIT();
+ CHB_SPI_ENABLE();
+
+ /*Send SRAM write command.*/
+ dummy = chb_xfer_byte(CHB_SPI_CMD_SW);
+
+ /*Send address where to start writing to.*/
+ dummy = chb_xfer_byte(addr);
+
+ for (i=0; i<len; i++)
+ {
+ dummy = chb_xfer_byte(*data++);
+ }
+
+ CHB_SPI_DISABLE();
+ CHB_LEAVE_CRIT();
+}
+#endif
+
+/**************************************************************************/
+/*!
+ Set the channel mode, BPSK, OQPSK, etc...
+*/
+/**************************************************************************/
+void chb_set_mode(U8 mode)
+{
+ switch (mode)
+ {
+ case OQPSK_868MHZ:
+ chb_reg_read_mod_write(TRX_CTRL_2, 0x08, 0x3f); // 802.15.4-2006, channel page 2, channel 0 (868 MHz, Europe)
+ chb_reg_read_mod_write(RF_CTRL_0, CHB_OQPSK_TX_OFFSET, 0x3); // this is according to table 7-16 in at86rf212 datasheet
+ break;
+ case OQPSK_915MHZ:
+ chb_reg_read_mod_write(TRX_CTRL_2, 0x0c, 0x3f); // 802.15.4-2006, channel page 2, channels 1-10 (915 MHz, US)
+ chb_reg_read_mod_write(RF_CTRL_0, CHB_OQPSK_TX_OFFSET, 0x3); // this is according to table 7-16 in at86rf212 datasheet
+ break;
+ case OQPSK_780MHZ:
+ chb_reg_read_mod_write(TRX_CTRL_2, 0x1c, 0x3f); // 802.15.4-2006, channel page 5, channel 0-3 (780 MHz, China)
+ chb_reg_read_mod_write(RF_CTRL_0, CHB_OQPSK_TX_OFFSET, 0x3); // this is according to table 7-16 in at86rf212 datasheet
+ break;
+ case BPSK40_915MHZ:
+ chb_reg_read_mod_write(TRX_CTRL_2, 0x00, 0x3f); // 802.15.4-2006, BPSK, 40 kbps
+ chb_reg_read_mod_write(RF_CTRL_0, CHB_BPSK_TX_OFFSET, 0x3); // this is according to table 7-16 in at86rf212 datasheet
+ break;
+ case BPSK20_868MHZ:
+ chb_reg_read_mod_write(TRX_CTRL_2, 0x00, 0x3f); // 802.15.4-2006, BPSK, 20 kbps
+ chb_reg_read_mod_write(RF_CTRL_0, CHB_BPSK_TX_OFFSET, 0x3); // this is according to table 7-16 in at86rf212 datasheet
+ break;
+ }
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+U8 chb_set_channel(U8 channel)
+{
+ U8 state;
+
+#if (CHB_CHINA == 1)
+
+ // this if for China only which uses a 780 MHz frequency band
+ if ((chb_reg_read(TRX_CTRL2) & 0x3f) != 0x1c)
+ {
+ chb_reg_read_mod_write(TRX_CTRL2, 0x1c, 0x3f);
+ }
+
+ if (channel > 3)
+ {
+ channel = 0;
+ }
+
+ channel = (channel << 1) + 11;
+
+ chb_reg_read_mod_write(CC_CTRL_1, 0x4, 0x7); // set 769 MHz base frequency for China
+ chb_reg_write(CC_CTRL_0, channel); // set the center frequency for the channel
+
+#else
+ //if (channel == 0)
+ //{
+ // // Channel 0 is for European use only. make sure we are using channel page 2,
+ // // channel 0 settings for 100 kbps
+ // if ((chb_reg_read(TRX_CTRL_2) & 0x3f) != 0x08)
+ // {
+ // chb_reg_read_mod_write(TRX_CTRL_2, 0x08, 0x3f);
+ // }
+ //}
+ //else if (channel > 10)
+ //{
+ // // if the channel is out of bounds for page 2, then default to channel 1 and
+ // // assume we're on the US frequency of 915 MHz
+ // channel = 1;
+ // if ((chb_reg_read(TRX_CTRL_2) & 0x3f) != 0x0c)
+ // {
+ // chb_reg_read_mod_write(TRX_CTRL_2, 0x0c, 0x3f);
+ // }
+ //}
+ //else
+ //{
+ // // Channels 1-10 are for US frequencies of 915 MHz
+ // if ((chb_reg_read(TRX_CTRL_2) & 0x3f) != 0x0c)
+ // {
+ // chb_reg_read_mod_write(TRX_CTRL_2, 0x0c, 0x3f);
+ // }
+ //}
+
+ chb_reg_read_mod_write(PHY_CC_CCA, channel, 0x1f);
+#endif
+
+ // add a delay to allow the PLL to lock if in active mode.
+ state = chb_get_state();
+ if ((state == RX_ON) || (state == PLL_ON))
+ {
+ chb_delay_us(TIME_PLL_LOCK_TIME);
+ }
+
+ return ((chb_reg_read(PHY_CC_CCA) & 0x1f) == channel) ? RADIO_SUCCESS : RADIO_TIMED_OUT;
+}
+
+/**************************************************************************/
+/*!
+ Set the power level
+*/
+/**************************************************************************/
+void chb_set_pwr(U8 val)
+{
+ chb_reg_write(PHY_TX_PWR, val);
+}
+
+/**************************************************************************/
+/*!
+ Set the TX/RX state machine state. Some manual manipulation is required
+ for certain operations. Check the datasheet for more details on the state
+ machine and manipulations.
+*/
+/**************************************************************************/
+U8 chb_set_state(U8 state)
+{
+ U8 curr_state, delay;
+
+ // if we're sleeping then don't allow transition
+ if (gpioGetValue(CHB_SLPTRPORT, CHB_SLPTRPIN))
+ {
+ return RADIO_WRONG_STATE;
+ }
+
+ // if we're in a transition state, wait for the state to become stable
+ curr_state = chb_get_state();
+ if ((curr_state == BUSY_TX_ARET) || (curr_state == BUSY_RX_AACK) || (curr_state == BUSY_RX) || (curr_state == BUSY_TX))
+ {
+ while (chb_get_state() == curr_state);
+ }
+
+ // At this point it is clear that the requested new_state is:
+ // TRX_OFF, RX_ON, PLL_ON, RX_AACK_ON or TX_ARET_ON.
+ // we need to handle some special cases before we transition to the new state
+ switch (state)
+ {
+ case TRX_OFF:
+ /* Go to TRX_OFF from any state. */
+ CHB_SLPTR_DISABLE();
+ chb_reg_read_mod_write(TRX_STATE, CMD_FORCE_TRX_OFF, 0x1f);
+ chb_delay_us(TIME_ALL_STATES_TRX_OFF);
+ break;
+
+ case TX_ARET_ON:
+ if (curr_state == RX_AACK_ON)
+ {
+ /* First do intermediate state transition to PLL_ON, then to TX_ARET_ON. */
+ chb_reg_read_mod_write(TRX_STATE, CMD_PLL_ON, 0x1f);
+ chb_delay_us(TIME_RX_ON_PLL_ON);
+ }
+ break;
+
+ case RX_AACK_ON:
+ if (curr_state == TX_ARET_ON)
+ {
+ /* First do intermediate state transition to RX_ON, then to RX_AACK_ON. */
+ chb_reg_read_mod_write(TRX_STATE, CMD_PLL_ON, 0x1f);
+ chb_delay_us(TIME_RX_ON_PLL_ON);
+ }
+ break;
+ }
+
+ /* Now we're okay to transition to any new state. */
+ chb_reg_read_mod_write(TRX_STATE, state, 0x1f);
+
+ /* When the PLL is active most states can be reached in 1us. However, from */
+ /* TRX_OFF the PLL needs time to activate. */
+ delay = (curr_state == TRX_OFF) ? TIME_TRX_OFF_PLL_ON : TIME_RX_ON_PLL_ON;
+ chb_delay_us(delay);
+
+ if (chb_get_state() == state)
+ {
+ return RADIO_SUCCESS;
+ }
+ return RADIO_TIMED_OUT;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_set_ieee_addr(U8 *addr)
+{
+ chb_eeprom_write(CFG_EEPROM_CHIBI_IEEEADDR, addr, 8);
+ chb_reg_write64(IEEE_ADDR_0, addr);
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_get_ieee_addr(U8 *addr)
+{
+ chb_eeprom_read(CFG_EEPROM_CHIBI_IEEEADDR, addr, 8);
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_set_short_addr(U16 addr)
+{
+ U8 *addr_ptr = (U8 *)&addr;
+ chb_pcb_t *pcb = chb_get_pcb();
+
+ chb_eeprom_write(CFG_EEPROM_CHIBI_SHORTADDR, addr_ptr, 2);
+ chb_reg_write16(SHORT_ADDR_0, addr);
+ pcb->src_addr = addr;
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+U16 chb_get_short_addr()
+{
+ int16_t addr;
+
+ chb_eeprom_read(CFG_EEPROM_CHIBI_SHORTADDR, (uint8_t*)&addr, 2);
+ return addr;
+}
+/**************************************************************************/
+/*!
+ Set the high gain mode pin for the CC1190
+*/
+/**************************************************************************/
+#if (CHB_CC1190_PRESENT)
+void chb_set_hgm(U8 enb)
+{
+ if (enb)
+ {
+ gpioSetValue(CHB_CC1190_HGM_PORT, CHB_CC1190_HGM_PIN, 1);
+ }
+ else
+ {
+ gpioSetValue(CHB_CC1190_HGM_PORT, CHB_CC1190_HGM_PIN, 0);
+ }
+}
+#endif
+
+/**************************************************************************/
+/*!
+ Load the data into the fifo, initiate a transmission attempt,
+ and return the status of the transmission attempt.
+*/
+/**************************************************************************/
+U8 chb_tx(U8 *hdr, U8 *data, U8 len)
+{
+ U8 state = chb_get_state();
+ chb_pcb_t *pcb = chb_get_pcb();
+
+ if ((state == BUSY_TX) || (state == BUSY_TX_ARET))
+ {
+ return RADIO_WRONG_STATE;
+ }
+
+ // TODO: check why we need to transition to the off state before we go to tx_aret_on
+ chb_set_state(TRX_OFF);
+ chb_set_state(TX_ARET_ON);
+
+ // TODO: try and start the frame transmission by writing TX_START command instead of toggling
+ // sleep pin...i just feel like it's kind of weird...
+
+ // write frame to buffer. first write header into buffer (add 1 for len byte), then data.
+ chb_frame_write(hdr, CHB_HDR_SZ + 1, data, len);
+
+ //Do frame transmission
+ chb_reg_read_mod_write(TRX_STATE, CMD_TX_START, 0x1F);
+
+ // wait for the transmission to end, signalled by the TRX END flag
+ while (!pcb->tx_end);
+ pcb->tx_end = false;
+
+ // check the status of the transmission
+ return chb_get_status();
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+static void chb_radio_init()
+{
+ U8 ieee_addr[8];
+
+ // reset chip
+ chb_reset();
+
+ // disable intps while we config the radio
+ chb_reg_write(IRQ_MASK, 0);
+
+ // force transceiver off while we configure the intps
+ chb_reg_read_mod_write(TRX_STATE, CMD_FORCE_TRX_OFF, 0x1F);
+
+ // make sure the transceiver is in the off state before proceeding
+ while ((chb_reg_read(TRX_STATUS) & 0x1f) != TRX_OFF);
+
+ // set radio cfg parameters
+ // **note** uncomment if these will be set to something other than default
+ //chb_reg_read_mod_write(XAH_CTRL_0, CHB_MAX_FRAME_RETRIES << CHB_MAX_FRAME_RETRIES_POS, 0xF << CHB_MAX_FRAME_RETRIES_POS);
+ //chb_reg_read_mod_write(XAH_CTRL_0, CHB_MAX_CSMA_RETRIES << CHB_MAX_CSMA_RETIRES_POS, 0x7 << CHB_MAX_CSMA_RETIRES_POS);
+ //chb_reg_read_mod_write(CSMA_SEED_1, CHB_CSMA_SEED1 << CHB_CSMA_SEED1_POS, 0x7 << CHB_CSMA_SEED1_POS);
+ //chb_ret_write(CSMA_SEED0, CHB_CSMA_SEED0);
+ //chb_reg_read_mod_write(PHY_CC_CCA, CHB_CCA_MODE << CHB_CCA_MODE_POS,0x3 << CHB_CCA_MODE_POS);
+ //chb_reg_write(CCA_THRES, CHB_CCA_ED_THRES);
+
+ // set frame version that we'll accept
+ chb_reg_read_mod_write(CSMA_SEED_1, CHB_FRM_VER << CHB_FVN_POS, 3 << CHB_FVN_POS);
+
+ // set interrupt mask
+ // re-enable intps while we config the radio
+ chb_reg_write(IRQ_MASK, (1<<IRQ_RX_START) | (1<<IRQ_TRX_END));
+
+ #if (CFG_CHIBI_PROMISCUOUS == 0)
+ // set autocrc mode
+ chb_reg_read_mod_write(TRX_CTRL_1, 1 << CHB_AUTO_CRC_POS, 1 << CHB_AUTO_CRC_POS);
+ #endif
+ // set up default phy modulation, data rate and power (Ex. OQPSK, 100 kbps, 868 MHz, 3dBm)
+ chb_set_mode(CFG_CHIBI_MODE); // Defined in projectconfig.h
+ chb_set_pwr(CFG_CHIBI_POWER); // Defined in projectconfig.h
+ chb_set_channel(CFG_CHIBI_CHANNEL); // Defined in projectconfig.h
+
+ // set fsm state
+ // put trx in rx auto ack mode
+ chb_set_state(RX_STATE);
+
+ // set pan ID
+ chb_reg_write16(PAN_ID_0, CFG_CHIBI_PANID); // Defined in projectconfig.h
+
+ // set short addr
+ // NOTE: Possibly get this from EEPROM
+ chb_reg_write16(SHORT_ADDR_0, chb_get_short_addr());
+
+ // set long addr
+ // NOTE: Possibly get this from EEPROM
+ chb_get_ieee_addr(ieee_addr);
+ chb_reg_write64(IEEE_ADDR_0, ieee_addr);
+
+#if (CHB_CC1190_PRESENT)
+ // set high gain mode pin to output and init to zero
+ gpioSetDir (CHB_CC1190_HGM_PORT, CHB_CC1190_HGM_PIN, 1);
+ gpioSetPullup (&CHB_CC1190_HGM_IOCONREG, gpioPullupMode_Inactive);
+ gpioSetValue (CHB_CC1190_HGM_PORT, CHB_CC1190_HGM_PIN, 0);
+
+ // set external power amp on AT86RF212
+ chb_reg_read_mod_write(TRX_CTRL_1, 1<<CHB_PA_EXT_EN_POS, 1<<CHB_PA_EXT_EN_POS);
+
+ // set power to lowest level possible
+ chb_set_pwr(0xd); // set to -11 dBm
+#endif
+
+ // set interrupt/gpio pin to input
+ gpioSetDir (CHB_EINTPORT, CHB_EINTPIN, 0);
+
+ // set internal resistor on EINT pin to inactive
+ gpioSetPullup (&CHB_EINTPIN_IOCONREG, gpioPullupMode_Inactive);
+
+ // configure pin for interrupt
+ gpioSetInterrupt (CHB_EINTPORT,
+ CHB_EINTPIN,
+ gpioInterruptSense_Edge, // Edge-sensitive
+ gpioInterruptEdge_Single, // Single edge
+ gpioInterruptEvent_ActiveHigh); // High triggers interrupt
+
+ // enable interrupt
+ gpioIntEnable (CHB_EINTPORT,
+ CHB_EINTPIN);
+
+ if (chb_get_state() != RX_STATE)
+ {
+ // ERROR occurred initializing the radio. Print out error message.
+ printf(chb_err_init);
+ }
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_drvr_init()
+{
+ // ToDo: Make sure gpioInit has been called
+ // ToDo: Make sure CT32B0 has been initialised and enabled
+
+ // config SPI for at86rf230 access
+ chb_spi_init();
+
+ // Setup 16-bit timer 0 (used for us delays)
+ timer16Init(0, 0xFFFF);
+ timer16Enable(0);
+
+ // Set sleep and reset as output
+ gpioSetDir(CHB_SLPTRPORT, CHB_SLPTRPIN, 1);
+ gpioSetDir(CHB_RSTPORT, CHB_RSTPIN, 1);
+
+ // configure IOs
+ gpioSetValue(CHB_SLPTRPORT, CHB_SLPTRPIN, 1); // Set sleep high
+ gpioSetValue(CHB_RSTPORT, CHB_RSTPIN, 1); // Set reset high
+
+ // Set internal resistors
+ gpioSetPullup (&CHB_SLPTRPIN_IOCONREG, gpioPullupMode_Inactive);
+ gpioSetPullup (&CHB_RSTPIN_IOCONREG, gpioPullupMode_Inactive);
+
+ // config radio
+ chb_radio_init();
+}
+
+/**************************************************************************/
+/*!
+ Enable or disable the radio's sleep mode.
+*/
+/**************************************************************************/
+void chb_sleep(U8 enb)
+{
+ if (enb)
+ {
+ // first we need to go to TRX OFF state
+ chb_set_state(TRX_OFF);
+
+ // set the SLPTR pin
+ // CHB_SLPTR_PORT |= _BV(CHB_SLPTR_PIN);
+ CHB_SLPTR_ENABLE();
+ }
+ else
+ {
+ // make sure the SLPTR pin is low first
+ // CHB_SLPTR_PORT &= ~(_BV(CHB_SLPTR_PIN));
+ CHB_SLPTR_DISABLE();
+
+ // we need to allow some time for the PLL to lock
+ chb_delay_us(TIME_SLEEP_TO_TRX_OFF);
+
+ // Turn the transceiver back on
+ chb_set_state(RX_STATE);
+ }
+}
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_ISR_Handler (void)
+{
+ U8 dummy, state, intp_src = 0;
+ chb_pcb_t *pcb = chb_get_pcb();
+
+ CHB_ENTER_CRIT();
+
+ /*Read Interrupt source.*/
+ CHB_SPI_ENABLE();
+
+ /*Send Register address and read register content.*/
+ dummy = chb_xfer_byte(IRQ_STATUS | CHB_SPI_CMD_RR);
+ intp_src = chb_xfer_byte(0);
+
+ CHB_SPI_DISABLE();
+
+ while (intp_src)
+ {
+ /*Handle the incomming interrupt. Prioritized.*/
+ if ((intp_src & CHB_IRQ_RX_START_MASK))
+ {
+ intp_src &= ~CHB_IRQ_RX_START_MASK;
+ }
+ else if (intp_src & CHB_IRQ_TRX_END_MASK)
+ {
+ state = chb_get_state();
+
+ if ((state == RX_ON) || (state == RX_AACK_ON) || (state == BUSY_RX_AACK))
+ {
+ // get the ed measurement
+ pcb->ed = chb_reg_read(PHY_ED_LEVEL);
+
+ // get the crc
+ pcb->crc = (chb_reg_read(PHY_RSSI) & (1<<7)) ? 1 : 0;
+
+ // if the crc is not valid, then do not read the frame and set the rx flag
+ if (pcb->crc)
+ {
+ // get the data
+ chb_frame_read();
+ pcb->rcvd_xfers++;
+ pcb->data_rcv = true;
+ }
+ }
+ else
+ {
+ pcb->tx_end = true;
+ }
+ intp_src &= ~CHB_IRQ_TRX_END_MASK;
+ while (chb_set_state(RX_STATE) != RADIO_SUCCESS);
+ }
+ else if (intp_src & CHB_IRQ_TRX_UR_MASK)
+ {
+ intp_src &= ~CHB_IRQ_TRX_UR_MASK;
+ pcb->underrun++;
+ }
+ else if (intp_src & CHB_IRQ_PLL_UNLOCK_MASK)
+ {
+ intp_src &= ~CHB_IRQ_PLL_UNLOCK_MASK;
+ }
+ else if (intp_src & CHB_IRQ_PLL_LOCK_MASK)
+ {
+ intp_src &= ~CHB_IRQ_PLL_LOCK_MASK;
+ }
+ else if (intp_src & CHB_IRQ_BAT_LOW_MASK)
+ {
+ intp_src &= ~CHB_IRQ_BAT_LOW_MASK;
+ pcb->battlow++;
+ }
+ else
+ {
+ }
+ }
+ CHB_LEAVE_CRIT();
+}
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+#ifndef CHIBI_DRVR_H
+#define CHIBI_DRVR_H
+
+#include "types.h"
+#include "projectconfig.h"
+#include "core/gpio/gpio.h"
+
+#define CHB_CC1190_PRESENT 0 /// Set to 1 if CC1190 is being used
+#define CHB_CHINA 0
+#define CHB_EEPROM_IEEE_ADDR CFG_CHIBI_EEPROM_IEEEADDR
+#define CHB_EEPROM_SHORT_ADDR CFG_CHIBI_EEPROM_SHORTADDR
+#define CHB_AT86RF212_VER_NUM 0x01
+#define CHB_AT86RF212_PART_NUM 0x07
+// #define CHB_BPSK 0 // set to 1 if want to use BPSK rather than OQPSK
+
+#define CHB_SPI_CMD_RW 0xC0 /**< Register Write (short mode). */
+#define CHB_SPI_CMD_RR 0x80 /**< Register Read (short mode). */
+#define CHB_SPI_CMD_FW 0x60 /**< Frame Transmit Mode (long mode). */
+#define CHB_SPI_CMD_FR 0x20 /**< Frame Receive Mode (long mode). */
+#define CHB_SPI_CMD_SW 0x40 /**< SRAM Write. */
+#define CHB_SPI_CMD_SR 0x00 /**< SRAM Read. */
+#define CHB_SPI_CMD_RADDRM 0x7F /**< Register Address Mask. */
+
+#define CHB_IRQ_BAT_LOW_MASK 0x80 /**< Mask for the BAT_LOW interrupt. */
+#define CHB_IRQ_TRX_UR_MASK 0x40 /**< Mask for the TRX_UR interrupt. */
+#define CHB_IRQ_TRX_END_MASK 0x08 /**< Mask for the TRX_END interrupt. */
+#define CHB_IRQ_RX_START_MASK 0x04 /**< Mask for the RX_START interrupt. */
+#define CHB_IRQ_PLL_UNLOCK_MASK 0x02 /**< Mask for the PLL_UNLOCK interrupt. */
+#define CHB_IRQ_PLL_LOCK_MASK 0x01 /**< Mask for the PLL_LOCK interrupt. */
+
+#define CHB_EINTPORT 1
+#define CHB_EINTPIN 8
+#define CHB_EINTPIN_IOCONREG IOCON_PIO1_8
+#define CHB_RSTPORT 1
+#define CHB_RSTPIN 9
+#define CHB_RSTPIN_IOCONREG IOCON_PIO1_9
+#define CHB_SLPTRPORT 1
+#define CHB_SLPTRPIN 10
+#define CHB_SLPTRPIN_IOCONREG IOCON_PIO1_10
+
+// if CC1190 present, set up the ports and pins for high gain mode control
+#if (CHB_CC1190_PRESENT)
+ #define CHB_CC1190_HGM_PORT 1
+ #define CHB_CC1190_HGM_PIN 11
+ #define CHB_CC1190_HGM_IOCONREG IOCON_PIO1_11
+#endif
+
+//#define CHB_DDR_SLPTR DDRF
+//#define CHB_DDR_RST DDRF
+//#define CHB_RADIO_IRQ INT6_vect
+//#define CHB_RADIO_IRQ_PIN INT6
+
+#define CHB_ENTER_CRIT() __disable_irq()
+#define CHB_LEAVE_CRIT() __enable_irq()
+#define CHB_RST_ENABLE() do {gpioSetValue(CHB_RSTPORT, CHB_RSTPIN, 0); } while (0)
+#define CHB_RST_DISABLE() do {gpioSetValue(CHB_RSTPORT, CHB_RSTPIN, 1); } while (0)
+#define CHB_SLPTR_ENABLE() do {gpioSetValue(CHB_SLPTRPORT, CHB_SLPTRPIN, 1); } while (0)
+#define CHB_SLPTR_DISABLE() do {gpioSetValue(CHB_SLPTRPORT, CHB_SLPTRPIN, 0); } while (0)
+
+// CCA constants
+enum
+{
+ CCA_ED = 1, /**< Use energy detection above threshold mode. */
+ CCA_CARRIER_SENSE = 2, /**< Use carrier sense mode. */
+ CCA_CARRIER_SENSE_WITH_ED = 3 /**< Use a combination of both energy detection and carrier sense. */
+};
+
+// configuration parameters
+enum
+{
+ CHB_CHANNEL = 1, // Replaced in projectconfig.h with CFG_CHIBI_CHANNEL
+ CHB_PAN_ID = 0x1234, // Replaced in projectconfig.h with CFG_CHIBI_PANID
+ CHB_TX_PWR = 0x0,
+ CHB_SHORT_ADDR = 0x0,
+ CHB_IEEE_ADDR = 0x0,
+ CHB_MAX_FRAME_RETRIES = 3,
+ CHB_MAX_CSMA_RETRIES = 4,
+ CHB_CCA_MODE = CCA_ED,
+ CHB_MIN_BE = 3,
+ CHB_MAX_BE = 5,
+ CHB_CCA_ED_THRES = 0x7,
+ CHB_CSMA_SEED0 = 0,
+ CHB_CSMA_SEED1 = 0,
+ CHB_FRM_VER = 1 // accept 802.15.4 ver 0 or 1 frames
+};
+
+// register addresses
+enum
+{
+ TRX_STATUS = 0x01,
+ TRX_STATE = 0x02,
+ TRX_CTRL_0 = 0x03,
+ TRX_CTRL_1 = 0x04,
+ PHY_TX_PWR = 0x05,
+ PHY_RSSI = 0x06,
+ PHY_ED_LEVEL = 0x07,
+ PHY_CC_CCA = 0x08,
+ CCA_THRES = 0x09,
+ RX_CTRL = 0x0a,
+ SFD_VALUE = 0x0b,
+ TRX_CTRL_2 = 0x0c,
+ ANT_DIV = 0x0d,
+ IRQ_MASK = 0x0e,
+ IRQ_STATUS = 0x0f,
+ VREG_CTRL = 0x10,
+ BATMON = 0x11,
+ XOSC_CTRL = 0x12,
+ CC_CTRL_0 = 0x13,
+ CC_CTRL_1 = 0x14,
+ RX_SYN = 0x15,
+ RF_CTRL_0 = 0x16,
+ XAH_CTRL_1 = 0x17,
+ FTN_CTRL = 0x18,
+ RF_CTRL_1 = 0x19,
+ PLL_CF = 0x1a,
+ PLL_DCU = 0x1b,
+ PART_NUM = 0x1c,
+ VERSION_NUM = 0x1d,
+ MAN_ID_0 = 0x1e,
+ MAN_ID_1 = 0x1f,
+ SHORT_ADDR_0 = 0x20,
+ SHORT_ADDR_1 = 0x21,
+ PAN_ID_0 = 0x22,
+ PAN_ID_1 = 0x23,
+ IEEE_ADDR_0 = 0x24,
+ IEEE_ADDR_1 = 0x25,
+ IEEE_ADDR_2 = 0x26,
+ IEEE_ADDR_3 = 0x27,
+ IEEE_ADDR_4 = 0x28,
+ IEEE_ADDR_5 = 0x29,
+ IEEE_ADDR_6 = 0x2a,
+ IEEE_ADDR_7 = 0x2b,
+ XAH_CTRL_0 = 0x2c,
+ CSMA_SEED_0 = 0x2d,
+ CSMA_SEED_1 = 0x2e,
+ CSMA_BE = 0x2f
+};
+
+// random defines
+enum
+{
+ CHB_MAX_FRAME_RETRIES_POS = 4,
+ CHB_MAX_CSMA_RETIRES_POS = 1,
+ CHB_CSMA_SEED1_POS = 0,
+ CHB_CCA_MODE_POS = 5,
+ CHB_AUTO_CRC_POS = 5,
+ CHB_TRX_END_POS = 3,
+ CHB_TRAC_STATUS_POS = 5,
+ CHB_FVN_POS = 6,
+ CHB_OQPSK_TX_OFFSET = 2,
+ CHB_BPSK_TX_OFFSET = 3,
+ CHB_MIN_FRAME_LENGTH = 3,
+ CHB_MAX_FRAME_LENGTH = 0x7f,
+ CHB_PA_EXT_EN_POS = 7
+};
+
+// transceiver timing
+enum{
+ TIME_RST_PULSE_WIDTH = 1,
+ TIME_P_ON_TO_CLKM_AVAIL = 380,
+ TIME_SLEEP_TO_TRX_OFF = 240,
+ TIME_TRX_OFF_TO_SLEEP = 35,
+ TIME_PLL_ON_TRX_OFF = 1,
+ TIME_TRX_OFF_RX_ON = 110,
+ TIME_RX_ON_TRX_OFF = 1,
+ TIME_PLL_ON_RX_ON = 1,
+ TIME_RX_ON_PLL_ON = 1,
+ TIME_PLL_LOCK_TIME = 110,
+ TIME_BUSY_TX_PLL_ON = 32,
+ TIME_ALL_STATES_TRX_OFF = 1,
+ TIME_RESET_TRX_OFF = 26,
+ TIME_TRX_IRQ_DELAY = 9,
+ TIME_TRX_OFF_PLL_ON = 110,
+ TIME_IRQ_PROCESSING_DLY = 32
+};
+
+// trac status
+enum{
+ TRAC_SUCCESS = 0,
+ TRAC_SUCCESS_DATA_PENDING = 1,
+ TRAC_WAIT_FOR_ACK = 2,
+ TRAC_CHANNEL_ACCESS_FAIL = 3,
+ TRAC_NO_ACK = 5,
+ TRAC_INVALID = 7
+};
+
+// radio statuses
+enum{
+ RADIO_SUCCESS = 0x40, /**< The requested service was performed successfully. */
+ RADIO_UNSUPPORTED_DEVICE, /**< The connected device is not an Atmel AT86RF212. */
+ RADIO_INVALID_ARGUMENT, /**< One or more of the supplied function arguments are invalid. */
+ RADIO_TIMED_OUT, /**< The requested service timed out. */
+ RADIO_WRONG_STATE, /**< The end-user tried to do an invalid state transition. */
+ RADIO_BUSY_STATE, /**< The radio transceiver is busy receiving or transmitting. */
+ RADIO_STATE_TRANSITION_FAILED, /**< The requested state transition could not be completed. */
+ RADIO_CCA_IDLE, /**< Channel is clear, available to transmit a new frame. */
+ RADIO_CCA_BUSY, /**< Channel busy. */
+ RADIO_TRX_BUSY, /**< Transceiver is busy receiving or transmitting data. */
+ RADIO_BAT_LOW, /**< Measured battery voltage is lower than voltage threshold. */
+ RADIO_BAT_OK, /**< Measured battery voltage is above the voltage threshold. */
+ RADIO_CRC_FAILED, /**< The CRC failed for the actual frame. */
+ RADIO_CHANNEL_ACCESS_FAILURE, /**< The channel access failed during the auto mode. */
+ RADIO_NO_ACK, /**< No acknowledge frame was received. */
+};
+
+// transceiver commands
+enum
+{
+ CMD_NOP = 0,
+ CMD_TX_START = 2,
+ CMD_FORCE_TRX_OFF = 3,
+ CMD_FORCE_PLL_ON = 4,
+ CMD_RX_ON = 6,
+ CMD_TRX_OFF = 8,
+ CMD_PLL_ON = 9,
+ CMD_RX_AACK_ON = 22,
+ CMD_TX_ARET_ON = 25
+};
+
+// transceiver states
+enum
+{
+ P_ON = 0,
+ BUSY_RX = 1,
+ BUSY_TX = 2,
+ RX_ON = 6,
+ TRX_OFF = 8,
+ PLL_ON = 9,
+ SLEEP = 15,
+ BUSY_RX_AACK = 17,
+ BUSY_TX_ARET = 18,
+ RX_AACK_ON = 22,
+ TX_ARET_ON = 25,
+ RX_ON_NOCLK = 28,
+ RX_AACK_ON_NOCLK = 29,
+ BUSY_RX_AACK_NOCLK = 30,
+ TRANS_IN_PROG = 31
+};
+
+// transceiver interrupt register
+enum
+{
+ IRQ_PLL_LOCK = 0,
+ IRQ_PLL_UNLOCK = 1,
+ IRQ_RX_START = 2,
+ IRQ_TRX_END = 3,
+ IRQ_CCA_ED_READY = 4,
+ IRQ_AMI = 5,
+ IRQ_TRX_UR = 6,
+ IRQ_BAT_LOW = 7
+};
+
+// transceiver modes
+enum
+{
+ OQPSK_868MHZ = 0,
+ OQPSK_915MHZ = 1,
+ OQPSK_780MHZ = 2,
+ BPSK40_915MHZ = 3,
+ BPSK20_868MHZ = 4
+};
+
+// See Table 7-15 for details
+enum
+{
+ CHB_PWR_EU1_2DBM = 0x63, // EU (868MHz) Linearized PA mode
+ CHB_PWR_EU1_1DBM = 0x64, // Note: BPSK 20kbit/s only!
+ CHB_PWR_EU1_0DBM = 0x65,
+ CHB_PWR_EU2_5DBM = 0xE7, // EU (868MHz) Boost mode (but > supply current)
+ CHB_PWR_EU2_4DBM = 0xE8, // 4-5dBM BPSK 20 kbit/s only!
+ CHB_PWR_EU2_3DBM = 0xE9, // 0-3dBM O-QPSK 100/200/400 kbit/s or BPSK
+ CHB_PWR_EU2_2DBM = 0xEA,
+ CHB_PWR_EU2_1DBM = 0xCB,
+ CHB_PWR_EU2_0DBM = 0xAB,
+ CHB_PWR_NA_10DBM = 0xC0, // North America (915MHz)
+ CHB_PWR_NA_9DBM = 0xA1,
+ CHB_PWR_NA_8DBM = 0x81,
+ CHB_PWR_NA_7DBM = 0x82,
+ CHB_PWR_NA_6DBM = 0x83,
+ CHB_PWR_NA_5DBM = 0x60,
+ CHB_PWR_NA_4DBM = 0x61,
+ CHB_PWR_NA_3DBM = 0x41,
+ CHB_PWR_NA_2DBM = 0x42,
+ CHB_PWR_NA_1DBM = 0x22,
+ CHB_PWR_NA_0DBM = 0x23,
+ CHB_PWR_CHINA_5DBM = 0xE7, // China (780MHz)
+ CHB_PWR_CHINA_4DBM = 0xE8,
+ CHB_PWR_CHINA_3DBM = 0xE9,
+ CHB_PWR_CHINA_2DBM = 0xEA,
+ CHB_PWR_CHINA_1DBM = 0xCA,
+ CHB_PWR_CHINA_0DBM = 0xAA
+};
+
+// define receive state based on promiscuous mode setting
+#if (CFG_CHIBI_PROMISCUOUS == 1)
+ #define RX_STATE RX_ON
+#else
+ #define RX_STATE RX_AACK_ON
+#endif
+// init
+void chb_drvr_init();
+
+// data access
+U8 chb_reg_read(U8 addr);
+U16 chb_reg_read16(U8 addr);
+void chb_reg_write(U8 addr, U8 val);
+void chb_reg_write16(U8 addr, U16 val);
+void chb_reg_write64(U8 addr, U8 *val);
+void chb_reg_read_mod_write(U8 addr, U8 val, U8 mask);
+void chb_frame_write(U8 *hdr, U8 hdr_len, U8 *data, U8 data_len);
+
+// general configuration
+void chb_set_mode(U8 mode);
+U8 chb_set_channel(U8 channel);
+void chb_set_pwr(U8 val);
+void chb_set_ieee_addr(U8 *addr);
+void chb_get_ieee_addr(U8 *addr);
+void chb_set_short_addr(U16 addr);
+U16 chb_get_short_addr();
+U8 chb_set_state(U8 state);
+
+// Power management
+void chb_sleep(U8 enb);
+
+// data transmit
+U8 chb_tx(U8 *hdr, U8 *data, U8 len);
+
+#if (CHB_CC1190_PRESENT)
+ void chb_set_hgm(U8 enb);
+#endif
+
+#ifdef CHB_DEBUG
+// sram access
+void chb_sram_read(U8 addr, U8 len, U8 *data);
+void chb_sram_write(U8 addr, U8 len, U8 *data);
+#endif
+
+void chb_ISR_Handler (void);
+
+#endif
+
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+/*!
+ \file
+ \ingroup
+
+
+*/
+/**************************************************************************/
+#include "chb_eeprom.h"
+#include "drivers/eeprom/eeprom.h"
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_eeprom_write(uint16_t addr, uint8_t *buf, uint16_t size)
+{
+ // Write the address one byte at a time
+ uint16_t a = 0;
+ while (a < size)
+ {
+ eepromWriteU8(addr + a, buf[a]);
+ a++;
+ }
+}
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_eeprom_read(uint16_t addr, uint8_t *buf, uint16_t size)
+{
+ // Read the contents at address
+ eepromReadBuffer(addr, buf, size);
+}
+
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+/*!
+ \file
+ \ingroup
+
+
+*/
+/**************************************************************************/
+#ifndef CHB_EEPROM_H
+#define CHB_EEPROM_H
+
+#include "projectconfig.h"
+#include "types.h"
+
+void chb_eeprom_write(U16 addr, U8 *buf, U16 size);
+void chb_eeprom_read(U16 addr, U8 *buf, U16 size);
+
+#endif
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+/*!
+ \file
+ \ingroup
+
+
+*/
+/**************************************************************************/
+#include "chb.h"
+#include "chb_spi.h"
+#include "core/ssp/ssp.h"
+
+/**************************************************************************/
+/*!
+
+*/
+/**************************************************************************/
+void chb_spi_init()
+{
+ // initialise spi, high between frames and transition on trailing edge
+ sspInit(0, sspClockPolarity_High, sspClockPhase_FallingEdge);
+
+ // set the slave select to idle
+ CHB_SPI_DISABLE();
+}
+
+/**************************************************************************/
+/*!
+ This function both reads and writes data. For write operations, include data
+ to be written as argument. For read ops, use dummy data as arg. Returned
+ data is read byte val.
+*/
+/**************************************************************************/
+U8 chb_xfer_byte(U8 data)
+{
+ /* Move on only if NOT busy and TX FIFO not full */
+ while ((SSP_SSP0SR & (SSP_SSP0SR_TNF_MASK | SSP_SSP0SR_BSY_MASK)) != SSP_SSP0SR_TNF_NOTFULL);
+ SSP_SSP0DR = data;
+
+ /* Wait until the busy bit is cleared and receive buffer is not empty */
+ while ((SSP_SSP0SR & (SSP_SSP0SR_BSY_MASK | SSP_SSP0SR_RNE_MASK)) != SSP_SSP0SR_RNE_NOTEMPTY);
+
+ // Read the queue
+ return SSP_SSP0DR;
+}
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+/*!
+ \file
+ \ingroup
+
+
+*/
+/**************************************************************************/
+
+#ifndef CHB_SPI_H
+#define CHB_SPI_H
+
+#include "projectconfig.h"
+#include "core/gpio/gpio.h"
+
+#define CHB_SSPORT (0) // P0.2 = SSEL
+#define CHB_SSPIN (2)
+
+#define CHB_SPI_ENABLE() do {gpioSetValue(CHB_SSPORT, CHB_SSPIN, 0);} while (0) // Drive SSEL low
+#define CHB_SPI_DISABLE() do {gpioSetValue(CHB_SSPORT, CHB_SSPIN, 1);} while (0) // Drive SSEL high
+
+#define CHB_SPIPORT 0
+#define CHB_SCK 1 // PB.1 - Output: SPI Serial Clock (SCLK)
+#define CHB_MOSI 2 // PB.2 - Output: SPI Master out - slave in (MOSI)
+#define CHB_MISO 3 // PB.3 - Input: SPI Master in - slave out (MISO)
+
+void chb_spi_init();
+U8 chb_xfer_byte(U8 data);
+
+#endif
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+*******************************************************************/
+/*!
+ \file types.h
+ \ingroup usb
+*/
+/*******************************************************************/
+#ifndef TYPES_H
+#define TYPES_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+// Standard data types
+typedef uint8_t U8; /// Generic 8 bit unsigned data type
+typedef uint16_t U16; /// Generic 16 bit unsigned data type
+typedef uint32_t U32; /// Generic 32 bit unsigned data type
+typedef uint64_t U64; /// Generic 64 bit unsigned data type
+
+typedef int8_t S8; /// Generic 8 bit signed data type
+typedef int16_t S16; /// Generic 16 bit signed data type
+typedef int32_t S32; /// Generic 32 bit signed data type
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file mcp4725.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Driver for the I2C-based MCP4725 12-Bit DAC.
+
+ @section Example
+
+ @code
+ #include "drivers/dac/mcp4725/mcp4725.h"
+ ...
+
+ mcp4725Init();
+
+ // Set the voltage to 50% of vref and don't save the value in EEPROM
+ mcp4725SetVoltage(2048, false);
+
+ // Request the current value from the DAC
+ uint8_t status = 0;
+ uint16_t value = 0;
+ mcp472ReadConfig(&status, &value);
+
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "mcp4725.h"
+#include "core/i2c/i2c.h"
+
+extern volatile uint8_t I2CMasterBuffer[I2C_BUFSIZE];
+extern volatile uint8_t I2CSlaveBuffer[I2C_BUFSIZE];
+extern volatile uint32_t I2CReadLength, I2CWriteLength;
+
+static bool _mcp4725Initialised = false;
+
+/**************************************************************************/
+/*!
+ @brief Initialises I2C for the MCP4725.
+*/
+/**************************************************************************/
+int mcp4725Init()
+{
+ // Initialise I2C
+ if (i2cInit(I2CMASTER) == false)
+ {
+ /* Fatal error */
+ return -1;
+ }
+
+ /* Set initialisation flag */
+ _mcp4725Initialised = true;
+
+ return 0;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the output voltage to a fraction of source vref. (Value
+ can be 0..4095)
+
+ @param[in] output
+ The 12-bit value representing the relationship between
+ the DAC's input voltage and its output voltage.
+ @param[in] writeEEPROM
+ If this value is true, 'output' will also be written
+ to the MCP4725's internal non-volatile memory, meaning
+ that the DAC will retain the current voltage output
+ after power-down or reset.
+*/
+/**************************************************************************/
+void mcp4725SetVoltage( uint16_t output, bool writeEEPROM )
+{
+ if (!_mcp4725Initialised) mcp4725Init();
+
+ // Clear write buffers
+ uint32_t i;
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 4;
+ I2CReadLength = 0;
+ I2CMasterBuffer[0] = MCP4725_ADDRESS; // I2C device address
+ if (writeEEPROM) // command and config bits (C2.C1.C0.x.x.PD1.PD0.x)
+ {
+ I2CMasterBuffer[1] = (MCP4726_CMD_WRITEDACEEPROM);
+ }
+ else
+ {
+ I2CMasterBuffer[1] = (MCP4726_CMD_WRITEDAC);
+ }
+ I2CMasterBuffer[2] = (output / 16); // Upper data bits (D11.D10.D9.D8.D7.D6.D5.D4)
+ I2CMasterBuffer[3] = (output % 16) << 4; // Lower data bits (D3.D2.D1.D0.x.x.x.x)
+ i2cEngine();
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the current configuration and output settings for the
+ DAC.
+
+ @param[out] status
+ Pointer to hold the contents of the status register
+ @param[out] value
+ Pointer to hold the output value of the 12-bit DAC
+*/
+/**************************************************************************/
+void mcp472ReadConfig( uint8_t *status, uint16_t *value )
+{
+ if (!_mcp4725Initialised) mcp4725Init();
+
+ // Clear write buffers
+ uint32_t i;
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 1;
+ I2CReadLength = 3;
+ I2CMasterBuffer[0] = MCP4725_ADDRESS | MCP4725_READ;
+ i2cEngine();
+
+ // Shift values to create properly formed integers
+ *status = I2CSlaveBuffer[0];
+ *value = ((I2CSlaveBuffer[1] << 4) | (I2CSlaveBuffer[2] >> 4));
+}
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file mcp4725.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _MCP4725_H_
+#define _MCP4725_H_
+
+#include "projectconfig.h"
+
+#define MCP4725_ADDRESS (0xC0) // 1100000x - Assumes A0 is GND and A2,A1 are 0 (MCP4725A0T-E/CH)
+#define MCP4725_READ (0x01)
+#define MCP4726_CMD_WRITEDAC (0x40) // Writes data to the DAC
+#define MCP4726_CMD_WRITEDACEEPROM (0x60) // Writes data to the DAC and the EEPROM (persisting the assigned value after reset)
+
+int mcp4725Init();
+void mcp4725SetVoltage( uint16_t output, bool writeEEPROM );
+void mcp472ReadConfig( uint8_t *status, uint16_t *value );
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file at25040.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Driver for Atmel's AT25010a/AT25020a/AT25040a 1K/2K/4K serial EEPROM.
+
+ @note The AT25xxx has an 8-byte buffer, including 1 command byte
+ and one address offset byte, meaning that a maximum of 6
+ bytes can be read or written in one operation. An error
+ will be returned if a value greater than 6 is passed in
+ for bufferLength with the eepromRead and eepromWrite
+ methods.
+
+ @section Example
+
+ @code
+ #include "core/cpu/cpu.h"
+ #include "drivers/eeprom/at25040/at25040.h"
+
+ int main(void)
+ {
+ cpuInit();
+ at25Init();
+
+ // Set read and write buffers
+ uint8_t wBuffer[1];
+ uint8_t rBuffer[1];
+
+ // Instantiate error message placeholder
+ at25Error_e error = AT25_ERROR_OK;
+
+ // Write 0xAA to EEPROM at address 0x0000
+ wBuffer[0] = 0xAA;
+ error = at25Write(0x0000, wBuffer, 1);
+ if (error)
+ {
+ // Log the error message or take appropriate actions
+ switch (error)
+ {
+ case (AT25_ERROR_TIMEOUT_WFINISH):
+ // EEPROM timed out waiting for the write to finish
+ break;
+ case (AT25_ERROR_TIMEOUT_WE):
+ // EEPROM timed out waiting for write-enable
+ break;
+ case (AT25_ERROR_ADDRERR):
+ // Address is out of range
+ break;
+ }
+ }
+
+ // Read the EEPROM at address 0x0000
+ at25Read(0x0000, rBuffer, 1);
+ ...
+ }
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "at25040.h"
+#include "core/ssp/ssp.h"
+#include "core/gpio/gpio.h"
+
+#define AT25_SELECT() gpioSetValue(0, 2, 0)
+#define AT25_DESELECT() gpioSetValue(0, 2, 1)
+
+uint32_t i, timeout;
+uint8_t src_addr[SSP_FIFOSIZE];
+uint8_t dest_addr[SSP_FIFOSIZE];
+
+/**************************************************************************/
+/*!
+ @brief Sends the write enable command (WREN/0x06)
+*/
+/**************************************************************************/
+void at25WriteEnable()
+{
+ AT25_SELECT();
+ src_addr[0] = AT25_WREN;
+ sspSend(0, (uint8_t *)src_addr, 1);
+ AT25_DESELECT();
+
+ // Delay for at least 250nS (1nS @ 72MHz = ~0.0072 ticks)
+ for (i = 0; i < 100; i++);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the value of the Read Status Register (RDSR/0x05)
+
+ @return The 8-bit value returned by the Read Status Register
+*/
+/**************************************************************************/
+uint8_t at25GetRSR()
+{
+ AT25_SELECT();
+ src_addr[0] = AT25_RDSR;
+ sspSend(0, (uint8_t *)src_addr, 1);
+ sspReceive(0, (uint8_t *)dest_addr, 1);
+ AT25_DESELECT();
+ return dest_addr[0] & (AT25_RDSR_WEN | AT25_RDSR_RDY);
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the SPI block (CLK set low when inactive, trigger
+ on leading edge).
+*/
+/**************************************************************************/
+void at25Init (void)
+{
+ sspInit(0, sspClockPolarity_Low, sspClockPhase_RisingEdge);
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the specified number of bytes from the supplied address.
+
+ This function will read one or more bytes starting at the supplied
+ address.
+
+ @param[in] address
+ The 16-bit address where the read will start. The maximum
+ value for the address depends on the size of the EEPROM
+ @param[in] *buffer
+ Pointer to the buffer that will store the read results
+ @param[in] bufferLength
+ Length of the buffer
+*/
+/**************************************************************************/
+at25Error_e at25Read (uint16_t address, uint8_t *buffer, uint32_t bufferLength)
+{
+ if (address >= AT25_MAXADDRESS)
+ {
+ return AT25_ERROR_ADDRERR;
+ }
+
+ if (bufferLength > 6)
+ {
+ return AT25_ERROR_BUFFEROVERFLOW;
+ }
+
+ timeout = 0;
+ while ( timeout < SSP_MAX_TIMEOUT )
+ {
+ // Wait until the device is ready
+ uint8_t status = at25GetRSR() & AT25_RDSR_RDY;
+ if (status == 0)
+ {
+ break;
+ }
+ timeout++;
+ }
+ if ( timeout == SSP_MAX_TIMEOUT )
+ {
+ return AT25_ERROR_TIMEOUT_WE;
+ }
+
+ AT25_SELECT();
+ // Read command (0x03), append A8 if > addr 256 bytes
+ src_addr[0] = address > 0xFF ? AT25_READ | AT25_A8 : AT25_READ;
+ src_addr[1] = (address);
+ sspSend(0, (uint8_t *)src_addr, 2);
+ sspReceive(0, (uint8_t *)&dest_addr[2], bufferLength);
+ AT25_DESELECT();
+
+ // Fill response buffer
+ for (i = 0; i < bufferLength; i++)
+ {
+ buffer[i] = dest_addr[i + 2];
+ }
+
+ return AT25_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes the supplied bytes at a specified address.
+
+ This function will write one or more bytes starting at the supplied
+ address.
+
+ @param[in] address
+ The 16-bit address where the write will start. The
+ maximum value for the address depends on the size of the
+ EEPROM
+ @param[in] *buffer
+ Pointer to the buffer that contains the values to write.
+ @param[in] bufferLength
+ Length of the buffer
+*/
+/**************************************************************************/
+at25Error_e at25Write (uint16_t address, uint8_t *buffer, uint32_t bufferLength)
+{
+ if (address >= AT25_MAXADDRESS)
+ {
+ return AT25_ERROR_ADDRERR;
+ }
+
+ if (bufferLength > 6)
+ {
+ return AT25_ERROR_BUFFEROVERFLOW;
+ }
+
+ // Set write enable latch
+ at25WriteEnable();
+
+ timeout = 0;
+ while ( timeout < SSP_MAX_TIMEOUT )
+ {
+ // Wait until the device is write enabled
+ if (at25GetRSR() == AT25_RDSR_WEN)
+ {
+ break;
+ }
+ timeout++;
+ }
+ if ( timeout == SSP_MAX_TIMEOUT )
+ {
+ return AT25_ERROR_TIMEOUT_WE;
+ }
+
+ for (i = 0; i < bufferLength; i++) // Init RD and WR buffer
+ {
+ src_addr[i+2] = buffer[i]; // leave two bytes for cmd and offset(8 bits)
+ dest_addr[i] = 0;
+ }
+
+ AT25_SELECT();
+ // Write command (0x02), append A8 if addr > 256 bytes
+ src_addr[0] = address > 0xFF ? AT25_WRITE | AT25_A8 : AT25_WRITE;
+ src_addr[1] = (address);
+ sspSend(0, (uint8_t *)src_addr, bufferLength + 2);
+ AT25_DESELECT();
+
+ // Wait at least 3ms
+ for (i = 0; i < ((CFG_CPU_CCLK / 1000) * 3); i++);
+
+ timeout = 0;
+ while ( timeout < SSP_MAX_TIMEOUT )
+ {
+ // Check status to see if write cycle is done or not
+ AT25_SELECT();
+ src_addr[0] = AT25_RDSR;
+ sspSend(0, (uint8_t *)src_addr, 1);
+ sspReceive(0, (uint8_t *)dest_addr, 1);
+ AT25_DESELECT();
+ // Wait until device is ready
+ if ((dest_addr[0] & AT25_RDSR_RDY) == 0x00)
+ {
+ break;
+ }
+ timeout++;
+ }
+ if ( timeout == SSP_MAX_TIMEOUT )
+ {
+ return AT25_ERROR_TIMEOUT_WFINISH;
+ }
+
+ for (i = 0; i < 300; i++); // Wait at least 250ns
+
+ return AT25_ERROR_OK;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file at25040.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _AT25040_H_
+#define _AT25040_H_
+
+#include "projectconfig.h"
+
+#define AT25_RDSR_RDY 0x01
+#define AT25_RDSR_WEN 0x02
+#define AT25_A8 0x08 // For addresses > 0xFF (AT25040 only) A8 must be added to R/W commands
+#define AT25_MAXADDRESS 0x0200 // AT25040 = 0X0200, AT25020 = 0x100, AT25010 = 0x80
+
+/**************************************************************************/
+/*!
+ AT25040 Commands
+*/
+/**************************************************************************/
+typedef enum
+{
+ AT25_WREN = 0x06,
+ AT25_WRDI = 0x04,
+ AT25_RDSR = 0x05,
+ AT25_WRSR = 0x01,
+ AT25_READ = 0x03,
+ AT25_WRITE = 0x02
+} at25_Commands_e;
+
+/**************************************************************************/
+/*!
+ Error messages
+*/
+/**************************************************************************/
+typedef enum
+{
+ AT25_ERROR_OK = 0, // Everything executed normally
+ AT25_ERROR_TIMEOUT_WE, // Timed out waiting for write enable status
+ AT25_ERROR_TIMEOUT_WFINISH, // Timed out waiting for write to finish
+ AT25_ERROR_ADDRERR, // Address out of range
+ AT25_ERROR_BUFFEROVERFLOW, // Max 6 bytes can be read/written in one operation
+ AT2_ERROR_LAST
+}
+at25Error_e;
+
+void at25Init (void);
+at25Error_e at25Read (uint16_t address, uint8_t *buffer, uint32_t bufferLength);
+at25Error_e at25Write (uint16_t address, uint8_t *buffer, uint32_t bufferLength);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file eeprom.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "projectconfig.h"
+#include "eeprom.h"
+
+// Currently only the MCP24AA I2C EEPROM is used
+#include "drivers/eeprom/mcp24aa/mcp24aa.h"
+
+static uint8_t buf[32];
+
+/**************************************************************************/
+/*!
+ @brief Checks whether the supplied address is within the valid range
+
+ @param[in] addr
+ The 16-bit address to check
+
+ @return Zero if the address is valid, otherwise 1
+*/
+/**************************************************************************/
+bool eepromCheckAddress(uint16_t addr)
+{
+ // Check for invalid values
+ return addr <= MCP24AA_MAXADDR ? FALSE : TRUE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads 1 byte from EEPROM
+
+ @param[in] addr
+ The 16-bit address to read from in EEPROM
+
+ @return An unsigned 8-bit value (uint8_t)
+*/
+/**************************************************************************/
+uint8_t eepromReadU8(uint16_t addr)
+{
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaReadBuffer(addr, buf, sizeof(uint8_t));
+
+ // ToDo: Handle any errors
+ if (error) { };
+
+ return buf[0];
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads 1 byte from EEPROM
+
+ @param[in] addr
+ The 16-bit address to read from in EEPROM
+
+ @return A signed 8-bit value (int8_t)
+*/
+/**************************************************************************/
+int8_t eepromReadS8(uint16_t addr)
+{
+ int8_t results;
+
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaReadBuffer(addr, buf, sizeof(int8_t));
+
+ // ToDo: Handle any errors
+ if (error) { };
+
+ memcpy(&results, buf, sizeof(int8_t));
+ return results;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads 2 bytes from EEPROM
+
+ @param[in] addr
+ The 16-bit address to read from in EEPROM
+
+ @return A unsigned 16-bit value (uint16_t)
+*/
+/**************************************************************************/
+uint16_t eepromReadU16(uint16_t addr)
+{
+ uint16_t results;
+
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaReadBuffer(addr, buf, sizeof(uint16_t));
+
+ // ToDo: Handle any errors
+ if (error) { };
+
+ memcpy(&results, buf, sizeof(uint16_t));
+
+ return results;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads 2 bytes from EEPROM
+
+ @param[in] addr
+ The 16-bit address to read from in EEPROM
+
+ @return A signed 16-bit value (int16_t)
+*/
+/**************************************************************************/
+int16_t eepromReadS16(uint16_t addr)
+{
+ int16_t results;
+
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaReadBuffer(addr, buf, sizeof(int16_t));
+
+ // ToDo: Handle any errors
+ if (error) { };
+
+ memcpy(&results, buf, sizeof(int16_t));
+ return results;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads 4 bytes from EEPROM
+
+ @param[in] addr
+ The 16-bit address to read from in EEPROM
+
+ @return A unsigned 32-bit value (uint32_t)
+*/
+/**************************************************************************/
+uint32_t eepromReadU32(uint16_t addr)
+{
+ uint32_t results;
+
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaReadBuffer(addr, buf, sizeof(uint32_t));
+
+ // ToDo: Handle any errors
+ if (error) { };
+
+ memcpy(&results, buf, sizeof(uint32_t));
+ return results;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads 4 bytes from EEPROM
+
+ @param[in] addr
+ The 16-bit address to read from in EEPROM
+
+ @return A signed 32-bit value (int32_t)
+*/
+/**************************************************************************/
+int32_t eepromReadS32(uint16_t addr)
+{
+ int32_t results;
+
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaReadBuffer(addr, buf, sizeof(int32_t));
+
+ // ToDo: Handle any errors
+ if (error) { };
+
+ memcpy(&results, buf, sizeof(int32_t));
+ return results;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads 8 bytes from EEPROM
+
+ @param[in] addr
+ The 16-bit address to read from in EEPROM
+
+ @return A unsigned 64-bit value (uint64_t)
+*/
+/**************************************************************************/
+uint64_t eepromReadU64(uint16_t addr)
+{
+ uint64_t results;
+
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaReadBuffer(addr, buf, sizeof(uint64_t));
+
+ // ToDo: Handle any errors
+ if (error) { };
+
+ memcpy(&results, buf, sizeof(uint64_t));
+ return results;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads 8 bytes from EEPROM
+
+ @param[in] addr
+ The 16-bit address to read from in EEPROM
+
+ @return A signed 64-bit value (int64_t)
+*/
+/**************************************************************************/
+int64_t eepromReadS64(uint16_t addr)
+{
+ int64_t results;
+
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaReadBuffer(addr, buf, sizeof(int64_t));
+
+ // ToDo: Handle any errors
+ if (error) { };
+
+ memcpy(&results, buf, sizeof(int64_t));
+ return results;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a variabls length buffer from EEPROM
+
+ @param[in] addr
+ The 16-bit address to write to in EEPROM
+ @param[out] buffer
+ Pointer to the buffer that will store any retrieved bytes
+ @param[in] bufferLength
+ The number of bytes to read
+*/
+/**************************************************************************/
+void eepromReadBuffer(uint16_t addr, uint8_t *buffer, uint32_t bufferLength)
+{
+ // Instantiate error message placeholder
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+
+ // Read the contents of address
+ error = mcp24aaReadBuffer(addr, buffer, bufferLength);
+
+ // ToDo: Handle any errors
+ if (error) { };
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes 1 byte to EEPROM
+
+ @param[in] addr
+ The 16-bit address to write to in EEPROM
+*/
+/**************************************************************************/
+void eepromWriteU8(uint16_t addr, uint8_t value)
+{
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaWriteBuffer(addr, (uint8_t *)&value, sizeof(value));
+
+ // ToDo: Handle any errors
+ if (error) { };
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes 1 signed byte to EEPROM
+
+ @param[in] addr
+ The 16-bit address to write to in EEPROM
+*/
+/**************************************************************************/
+void eepromWriteS8(uint16_t addr, int8_t value)
+{
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaWriteBuffer(addr, (uint8_t *)&value, sizeof(value));
+
+ // ToDo: Handle any errors
+ if (error) { };
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes an unsigned 16-bit integer to EEPROM
+
+ @param[in] addr
+ The 16-bit address to write to in EEPROM
+*/
+/**************************************************************************/
+void eepromWriteU16(uint16_t addr, uint16_t value)
+{
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaWriteBuffer(addr, (uint8_t *)&value, sizeof(value));
+
+ // ToDo: Handle any errors
+ if (error) { };
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes a signed 16-bit integer to EEPROM
+
+ @param[in] addr
+ The 16-bit address to write to in EEPROM
+*/
+/**************************************************************************/
+void eepromWriteS16(uint16_t addr, int16_t value)
+{
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaWriteBuffer(addr, (uint8_t *)&value, sizeof(value));
+
+ // ToDo: Handle any errors
+ if (error) { };
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes an unsigned 32-bit integer to EEPROM
+
+ @param[in] addr
+ The 16-bit address to write to in EEPROM
+*/
+/**************************************************************************/
+void eepromWriteU32(uint16_t addr, uint32_t value)
+{
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaWriteBuffer(addr, (uint8_t *)&value, sizeof(value));
+
+ // ToDo: Handle any errors
+ if (error) { };
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes a signed 32-bit integer to EEPROM
+
+ @param[in] addr
+ The 16-bit address to write to in EEPROM
+*/
+/**************************************************************************/
+void eepromWriteS32(uint16_t addr, int32_t value)
+{
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaWriteBuffer(addr, (uint8_t *)&value, sizeof(value));
+
+ // ToDo: Handle any errors
+ if (error) { };
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes an unsigned 64-bit integer to EEPROM
+
+ @param[in] addr
+ The 16-bit address to write to in EEPROM
+*/
+/**************************************************************************/
+void eepromWriteU64(uint16_t addr, uint64_t value)
+{
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaWriteBuffer(addr, (uint8_t *)&value, sizeof(value));
+
+ // ToDo: Handle any errors
+ if (error) { };
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes a signed 64-bit integer to EEPROM
+
+ @param[in] addr
+ The 16-bit address to write to in EEPROM
+*/
+/**************************************************************************/
+void eepromWriteS64(uint16_t addr, int64_t value)
+{
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+ error = mcp24aaWriteBuffer(addr, (uint8_t *)&value, sizeof(value));
+
+ // ToDo: Handle any errors
+ if (error) { };
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file eeprom.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __EEPROM_H__
+#define __EEPROM_H__
+
+#include "projectconfig.h"
+
+// Method Prototypes
+bool eepromCheckAddress ( uint16_t addr );
+uint8_t eepromReadU8 ( uint16_t addr );
+int8_t eepromReadS8 ( uint16_t addr );
+uint16_t eepromReadU16 ( uint16_t addr );
+int16_t eepromReadS16 ( uint16_t addr );
+uint32_t eepromReadU32 ( uint16_t addr );
+int32_t eepromReadS32 ( uint16_t addr );
+uint64_t eepromReadU64 ( uint16_t addr );
+int64_t eepromReadS64 ( uint16_t addr );
+void eepromReadBuffer ( uint16_t addr, uint8_t *buffer, uint32_t bufferLength);
+void eepromWriteU8 ( uint16_t addr, uint8_t value );
+void eepromWriteS8 ( uint16_t addr, int8_t value );
+void eepromWriteU16 ( uint16_t addr, uint16_t value );
+void eepromWriteS16 ( uint16_t addr, int16_t value );
+void eepromWriteU32 ( uint16_t addr, uint32_t value );
+void eepromWriteS32 ( uint16_t addr, int32_t value );
+void eepromWriteU64 ( uint16_t addr, uint64_t value );
+void eepromWriteS64 ( uint16_t addr, int64_t value );
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file mcp24aa.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Driver for Microchip's 24AA32AF serial EEPROM. This driver assumes
+ that the address is set to 1010 000.
+
+ @section Example
+
+ @code
+ #include "core/cpu/cpu.h"
+ #include "drivers/eeprom/mcp24aa/mcp24aa.h"
+
+ int main(void)
+ {
+ cpuInit();
+
+ mcp24aaInit();
+
+ // Instantiate error message placeholder
+ mcp24aaError_e error = MCP24AA_ERROR_OK;
+
+ // Create read buffer (1 byte)
+ uint8_t buffer[1] = { 0x00 };
+
+ // Write 0xCC at address 0x125
+ error = mcp24aaWriteByte(0x0125, 0xCC);
+ if (error)
+ {
+ // Handle any errors
+ switch (error)
+ {
+ case (MCP24AA_ERROR_I2CINIT):
+ // Unable to initialise I2C
+ break;
+ case (MCP24AA_ERROR_ADDRERR):
+ // Address out of range
+ break;
+ default:
+ break;
+ }
+ }
+
+ // Read the contents of address 0x0125
+ error = MCP24AA_ERROR_OK;
+ error = mcp24aaReadByte(0x0125, buffer);
+ if (error)
+ {
+ // Handle any errors
+ switch (error)
+ {
+ case (MCP24AA_ERROR_I2CINIT):
+ // Unable to initialise I2C
+ break;
+ case (MCP24AA_ERROR_ADDRERR):
+ // Address out of range
+ break;
+ default:
+ break;
+ }
+ }
+
+ uint8_t results = buffer[0];
+ }
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "mcp24aa.h"
+#include "core/systick/systick.h"
+#include "core/i2c/i2c.h"
+
+extern volatile uint8_t I2CMasterBuffer[I2C_BUFSIZE];
+extern volatile uint8_t I2CSlaveBuffer[I2C_BUFSIZE];
+extern volatile uint32_t I2CReadLength, I2CWriteLength;
+
+uint32_t i, timeout;
+
+static bool _mcp24aaInitialised = false;
+
+/**************************************************************************/
+/*!
+ @brief Initialises the I2C block
+*/
+/**************************************************************************/
+mcp24aaError_e mcp24aaInit()
+{
+ // Initialise I2C
+ if (i2cInit(I2CMASTER) == false)
+ {
+ return MCP24AA_ERROR_I2CINIT; /* Fatal error */
+ }
+
+ // Set initialisation flag
+ _mcp24aaInitialised = true;
+
+ return MCP24AA_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the specified number of bytes from the supplied address.
+
+ This function will read one or more bytes starting at the supplied
+ address. A maximum of 8 bytes can be read in one operation.
+
+ @param[in] address
+ The 16-bit address where the read will start. The maximum
+ value for the address depends on the size of the EEPROM
+ @param[in] *buffer
+ Pointer to the buffer that will store the read results
+ @param[in] bufferLength
+ Length of the buffer
+*/
+/**************************************************************************/
+mcp24aaError_e mcp24aaReadBuffer (uint16_t address, uint8_t *buffer, uint32_t bufferLength)
+{
+ if (!_mcp24aaInitialised) mcp24aaInit();
+
+ if (address >= MCP24AA_MAXADDR)
+ {
+ return MCP24AA_ERROR_ADDRERR;
+ }
+
+ if (bufferLength > 8)
+ {
+ return MCP24AA_ERROR_BUFFEROVERFLOW;
+ }
+
+ // ToDo: Check if I2C is ready
+
+ // Clear buffers
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ I2CSlaveBuffer[i] = 0x00;
+ }
+
+ // Write address bits to enable random read
+ I2CWriteLength = 3;
+ I2CReadLength = bufferLength;
+ I2CMasterBuffer[0] = MCP24AA_ADDR; // I2C device address
+ I2CMasterBuffer[1] = (address >> 8); // Address (high byte)
+ I2CMasterBuffer[2] = (address & 0xFF); // Address (low byte)
+ // If you wish to read, you need to append the address w/read bit, though this
+ // needs to be placed one bit higher than the size of I2CWriteLength which
+ // may be unexpected
+ I2CMasterBuffer[3] = MCP24AA_ADDR | MCP24AA_READBIT;
+
+ // Transmit command
+ i2cEngine();
+
+ // Fill response buffer
+ for (i = 0; i < bufferLength; i++)
+ {
+ buffer[i] = I2CSlaveBuffer[i];
+ }
+
+ return MCP24AA_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes the supplied bytes at a specified address.
+
+ This function will write one or more bytes starting at the supplied
+ address. A maximum of 8 bytes can be written in one operation.
+
+ @param[in] address
+ The 16-bit address where the write will start. The
+ maximum value for the address depends on the size of the
+ EEPROM
+ @param[in] *buffer
+ Pointer to the buffer that contains the values to write.
+ @param[in] bufferLength
+ Length of the buffer
+*/
+/**************************************************************************/
+mcp24aaError_e mcp24aaWriteBuffer (uint16_t address, uint8_t *buffer, uint32_t bufferLength)
+{
+ if (!_mcp24aaInitialised) mcp24aaInit();
+
+ if (address >= MCP24AA_MAXADDR)
+ {
+ return MCP24AA_ERROR_ADDRERR;
+ }
+
+ if (bufferLength > 8)
+ {
+ return MCP24AA_ERROR_BUFFEROVERFLOW;
+ }
+
+ // ToDo: Check if I2C is ready
+
+ // Clear write buffer
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ // Write address bits and data to the master buffer
+ I2CWriteLength = 3 + bufferLength;
+ I2CReadLength = 0;
+ I2CMasterBuffer[0] = MCP24AA_ADDR; // I2C device address
+ I2CMasterBuffer[1] = (address >> 8); // Address (high byte)
+ I2CMasterBuffer[2] = (address & 0xFF); // Address (low byte)
+ for (i = 0; i < bufferLength; i++)
+ {
+ I2CMasterBuffer[i+3] = buffer[i];
+ }
+
+ // Transmit command
+ i2cEngine();
+
+ // Wait at least 10ms
+ systickDelay(10);
+
+ return MCP24AA_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads one byte from the supplied address.
+
+ This function will read one byte starting at the supplied address.
+
+ @param[in] address
+ The 16-bit address where the read will start. The maximum
+ value for the address depends on the size of the EEPROM
+ @param[in] *buffer
+ Pointer to the buffer that will store the read results
+
+ @code
+ #include "core/cpu/cpu/h"
+ #include "drivers/eeprom/mcp24aa/mcp24aa.h"
+ ...
+ cpuInit();
+ mcp24aaInit();
+
+ // Create read buffer (1 byte)
+ uint8_t buffer[1] = { 0x00 };
+
+ // Write 0xEE and address 0x0120
+ mcp24aaWriteByte(0x0120, 0xEE);
+
+ // Populate buffer with contents of 0x0120
+ mcp24aaReadByte(0x0120, buffer);
+
+ // results should equal 0xEE
+ uint8_t results = buffer[0];
+ @endcode
+*/
+/**************************************************************************/
+mcp24aaError_e mcp24aaReadByte (uint16_t address, uint8_t *buffer)
+{
+ if (!_mcp24aaInitialised) mcp24aaInit();
+
+ return mcp24aaReadBuffer(address, buffer, 1);
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes one byte to the supplied address.
+
+ This function will write one byte at the supplied address.
+
+ @param[in] address
+ The 16-bit address where the write will start. The maximum
+ value for the address depends on the size of the EEPROM
+ @param[in] value
+ The data to be written to the EEPROM
+
+ @code
+ #include "core/cpu/cpu/h"
+ #include "drivers/eeprom/mcp24aa/mcp24aa.h"
+ ...
+ cpuInit();
+ mcp24aaInit();
+
+ // Create read buffer (1 byte)
+ uint8_t buffer[1] = { 0x00 };
+
+ // Write 0xEE and address 0x0120
+ mcp24aaWriteByte(0x0120, 0xEE);
+
+ // Populate buffer with contents of 0x0120
+ mcp24aaReadByte(0x0120, buffer);
+
+ // results should equal 0xEE
+ uint8_t results = buffer[0];
+ @endcode
+*/
+/**************************************************************************/
+mcp24aaError_e mcp24aaWriteByte (uint16_t address, uint8_t value)
+{
+ if (!_mcp24aaInitialised) mcp24aaInit();
+
+ // Set read buffer
+ uint8_t wBuffer[1];
+
+ // Write byte to EEPROM at specified address
+ wBuffer[0] = value;
+ return mcp24aaWriteBuffer(address, wBuffer, 1);
+}
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file mcp24aa.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _MCP24AA_H_
+#define _MCP24AA_H_
+
+#include "projectconfig.h"
+
+#define MCP24AA_ADDR 0xA0 // 10100000
+#define MCP24AA_RW 0x01
+#define MCP24AA_READBIT 0x01
+#define MCP24AA_MAXADDR 0xFFF // 4K = 4096
+
+typedef enum
+{
+ MCP24AA_ERROR_OK = 0, // Everything executed normally
+ MCP24AA_ERROR_I2CINIT, // Unable to initialise I2C
+ MCP24AA_ERROR_I2CBUSY, // I2C already in use
+ MCP24AA_ERROR_ADDRERR, // Address out of range
+ MCP24AA_ERROR_BUFFEROVERFLOW, // Max 8 bytes can be read/written in one operation
+ MCP24AA_ERROR_LAST
+}
+mcp24aaError_e;
+
+mcp24aaError_e mcp24aaInit (void);
+mcp24aaError_e mcp24aaReadBuffer (uint16_t address, uint8_t *buffer, uint32_t bufferLength);
+mcp24aaError_e mcp24aaWriteBuffer (uint16_t address, uint8_t *buffer, uint32_t bufferLength);
+mcp24aaError_e mcp24aaReadByte (uint16_t address, uint8_t *buffer);
+mcp24aaError_e mcp24aaWriteByte (uint16_t address, uint8_t value);
+
+
+#endif
--- /dev/null
+/*------------------------------------------------------------------------*/
+/* Unicode - Local code bidirectional converter (C)ChaN, 2009 */
+/* (SBCS code pages) */
+/*------------------------------------------------------------------------*/
+/* 437 U.S. (OEM)
+/ 720 Arabic (OEM)
+/ 1256 Arabic (Windows)
+/ 737 Greek (OEM)
+/ 1253 Greek (Windows)
+/ 1250 Central Europe (Windows)
+/ 775 Baltic (OEM)
+/ 1257 Baltic (Windows)
+/ 850 Multilingual Latin 1 (OEM)
+/ 852 Latin 2 (OEM)
+/ 1252 Latin 1 (Windows)
+/ 855 Cyrillic (OEM)
+/ 1251 Cyrillic (Windows)
+/ 866 Russian (OEM)
+/ 857 Turkish (OEM)
+/ 1254 Turkish (Windows)
+/ 858 Multilingual Latin 1 + Euro (OEM)
+/ 862 Hebrew (OEM)
+/ 1255 Hebrew (Windows)
+/ 874 Thai (OEM, Windows)
+/ 1258 Vietnam (OEM, Windows)
+*/
+
+#include "ff.h"
+
+
+#if _CODE_PAGE == 437
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP437(0x80-0xFF) to Unicode conversion table */
+ 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7,
+ 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x00C4, 0x00C5,
+ 0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9,
+ 0x00FF, 0x00D6, 0x00DC, 0x00A2, 0x00A3, 0x00A5, 0x20A7, 0x0192,
+ 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA,
+ 0x00BF, 0x2310, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+ 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+ 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+ 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+ 0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4,
+ 0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2229,
+ 0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248,
+ 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 720
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP720(0x80-0xFF) to Unicode conversion table */
+ 0x0000, 0x0000, 0x00E9, 0x00E2, 0x0000, 0x00E0, 0x0000, 0x00E7,
+ 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x0651, 0x0652, 0x00F4, 0x00A4, 0x0640, 0x00FB, 0x00F9,
+ 0x0621, 0x0622, 0x0623, 0x0624, 0x00A3, 0x0625, 0x0626, 0x0627,
+ 0x0628, 0x0629, 0x062A, 0x062B, 0x062C, 0x062D, 0x062E, 0x062F,
+ 0x0630, 0x0631, 0x0632, 0x0633, 0x0634, 0x0635, 0x00AB, 0x00BB,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+ 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+ 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+ 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+ 0x0636, 0x0637, 0x0638, 0x0639, 0x063A, 0x0641, 0x00B5, 0x0642,
+ 0x0643, 0x0644, 0x0645, 0x0646, 0x0647, 0x0648, 0x0649, 0x064A,
+ 0x2261, 0x064B, 0x064C, 0x064D, 0x064E, 0x064F, 0xO650, 0x2248,
+ 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 737
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP737(0x80-0xFF) to Unicode conversion table */
+ 0x0391, 0x0392, 0x0393, 0x0394, 0x0395, 0x0396, 0x0397, 0x0398,
+ 0x0399, 0x039A, 0x039B, 0x039C, 0x039D, 0x039E, 0x039F, 0x03A0,
+ 0x03A1, 0x03A3, 0x03A4, 0x03A5, 0x03A6, 0x03A7, 0x03A8, 0x03A9,
+ 0x03B1, 0x03B2, 0x03B3, 0x03B4, 0x03B5, 0x03B6, 0x03B7, 0x03B8,
+ 0x03B9, 0x03BA, 0x03BB, 0x03BC, 0x03BD, 0x03BE, 0x03BF, 0x03C0,
+ 0x03C1, 0x03C3, 0x03C2, 0x03C4, 0x03C5, 0x03C6, 0x03C7, 0x03C8,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+ 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+ 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+ 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+ 0x03C9, 0x03AC, 0x03AD, 0x03AE, 0x03CA, 0x03AF, 0x03CC, 0x03CD,
+ 0x03CB, 0x03CE, 0x0386, 0x0388, 0x0389, 0x038A, 0x038C, 0x038E,
+ 0x038F, 0x00B1, 0x2265, 0x2264, 0x03AA, 0x03AB, 0x00F7, 0x2248,
+ 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 775
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP775(0x80-0xFF) to Unicode conversion table */
+ 0x0106, 0x00FC, 0x00E9, 0x0101, 0x00E4, 0x0123, 0x00E5, 0x0107,
+ 0x0142, 0x0113, 0x0156, 0x0157, 0x012B, 0x0179, 0x00C4, 0x00C5,
+ 0x00C9, 0x00E6, 0x00C6, 0x014D, 0x00F6, 0x0122, 0x00A2, 0x015A,
+ 0x015B, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x00D7, 0x00A4,
+ 0x0100, 0x012A, 0x00F3, 0x017B, 0x017C, 0x017A, 0x201D, 0x00A6,
+ 0x00A9, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x0141, 0x00AB, 0x00BB,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x0104, 0x010C, 0x0118,
+ 0x0116, 0x2563, 0x2551, 0x2557, 0x255D, 0x012E, 0x0160, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x0172, 0x016A,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x017D,
+ 0x0105, 0x010D, 0x0119, 0x0117, 0x012F, 0x0161, 0x0173, 0x016B,
+ 0x017E, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+ 0x00D3, 0x00DF, 0x014C, 0x0143, 0x00F5, 0x00D5, 0x00B5, 0x0144,
+ 0x0136, 0x0137, 0x013B, 0x013C, 0x0146, 0x0112, 0x0145, 0x2019,
+ 0x00AD, 0x00B1, 0x201C, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x201E,
+ 0x00B0, 0x2219, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 850
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP850(0x80-0xFF) to Unicode conversion table */
+ 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7,
+ 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x00C4, 0x00C5,
+ 0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9,
+ 0x00FF, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x00D7, 0x0192,
+ 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA,
+ 0x00BF, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x00C0,
+ 0x00A9, 0x2563, 0x2551, 0x2557, 0x255D, 0x00A2, 0x00A5, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x00E3, 0x00C3,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+ 0x00F0, 0x00D0, 0x00CA, 0x00CB, 0x00C8, 0x0131, 0x00CD, 0x00CE,
+ 0x00CF, 0x2518, 0x250C, 0x2588, 0x2584, 0x00A6, 0x00CC, 0x2580,
+ 0x00D3, 0x00DF, 0x00D4, 0x00D2, 0x00F5, 0x00D5, 0x00B5, 0x00FE,
+ 0x00DE, 0x00DA, 0x00DB, 0x00D9, 0x00FD, 0x00DD, 0x00AF, 0x00B4,
+ 0x00AD, 0x00B1, 0x2017, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x00B8,
+ 0x00B0, 0x00A8, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 852
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP852(0x80-0xFF) to Unicode conversion table */
+ 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x016F, 0x0107, 0x00E7,
+ 0x0142, 0x00EB, 0x0150, 0x0151, 0x00EE, 0x0179, 0x00C4, 0x0106,
+ 0x00C9, 0x0139, 0x013A, 0x00F4, 0x00F6, 0x013D, 0x013E, 0x015A,
+ 0x015B, 0x00D6, 0x00DC, 0x0164, 0x0165, 0x0141, 0x00D7, 0x010D,
+ 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x0104, 0x0105, 0x017D, 0x017E,
+ 0x0118, 0x0119, 0x00AC, 0x017A, 0x010C, 0x015F, 0x00AB, 0x00BB,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x011A,
+ 0x015E, 0x2563, 0x2551, 0x2557, 0x255D, 0x017B, 0x017C, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x0102, 0x0103,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+ 0x0111, 0x0110, 0x010E, 0x00CB, 0x010F, 0x0147, 0x00CD, 0x00CE,
+ 0x011B, 0x2518, 0x250C, 0x2588, 0x2584, 0x0162, 0x016E, 0x2580,
+ 0x00D3, 0x00DF, 0x00D4, 0x0143, 0x0144, 0x0148, 0x0160, 0x0161,
+ 0x0154, 0x00DA, 0x0155, 0x0170, 0x00FD, 0x00DD, 0x0163, 0x00B4,
+ 0x00AD, 0x02DD, 0x02DB, 0x02C7, 0x02D8, 0x00A7, 0x00F7, 0x00B8,
+ 0x00B0, 0x00A8, 0x02D9, 0x0171, 0x0158, 0x0159, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 855
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP855(0x80-0xFF) to Unicode conversion table */
+ 0x0452, 0x0402, 0x0453, 0x0403, 0x0451, 0x0401, 0x0454, 0x0404,
+ 0x0455, 0x0405, 0x0456, 0x0406, 0x0457, 0x0407, 0x0458, 0x0408,
+ 0x0459, 0x0409, 0x045A, 0x040A, 0x045B, 0x040B, 0x045C, 0x040C,
+ 0x045E, 0x040E, 0x045F, 0x040F, 0x044E, 0x042E, 0x044A, 0x042A,
+ 0x0430, 0x0410, 0x0431, 0x0411, 0x0446, 0x0426, 0x0434, 0x0414,
+ 0x0435, 0x0415, 0x0444, 0x0424, 0x0433, 0x0413, 0x00AB, 0x00BB,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x0445, 0x0425, 0x0438,
+ 0x0418, 0x2563, 0x2551, 0x2557, 0x255D, 0x0439, 0x0419, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x043A, 0x041A,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+ 0x043B, 0x041B, 0x043C, 0x041C, 0x043D, 0x041D, 0x043E, 0x041E,
+ 0x043F, 0x2518, 0x250C, 0x2588, 0x2584, 0x041F, 0x044F, 0x2580,
+ 0x042F, 0x0440, 0x0420, 0x0441, 0x0421, 0x0442, 0x0422, 0x0443,
+ 0x0423, 0x0436, 0x0416, 0x0432, 0x0412, 0x044C, 0x042C, 0x2116,
+ 0x00AD, 0x044B, 0x042B, 0x0437, 0x0417, 0x0448, 0x0428, 0x044D,
+ 0x042D, 0x0449, 0x0429, 0x0447, 0x0427, 0x00A7, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 857
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP857(0x80-0xFF) to Unicode conversion table */
+ 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7,
+ 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x0131, 0x00C4, 0x00C5,
+ 0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9,
+ 0x0130, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x015E, 0x015F,
+ 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x011E, 0x011F,
+ 0x00BF, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x00C0,
+ 0x00A9, 0x2563, 0x2551, 0x2557, 0x255D, 0x00A2, 0x00A5, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x00E3, 0x00C3,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+ 0x00BA, 0x00AA, 0x00CA, 0x00CB, 0x00C8, 0x0000, 0x00CD, 0x00CE,
+ 0x00CF, 0x2518, 0x250C, 0x2588, 0x2584, 0x00A6, 0x00CC, 0x2580,
+ 0x00D3, 0x00DF, 0x00D4, 0x00D2, 0x00F5, 0x00D5, 0x00B5, 0x0000,
+ 0x00D7, 0x00DA, 0x00DB, 0x00D9, 0x00EC, 0x00FF, 0x00AF, 0x00B4,
+ 0x00AD, 0x00B1, 0x0000, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x00B8,
+ 0x00B0, 0x00A8, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 858
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP858(0x80-0xFF) to Unicode conversion table */
+ 0x00C7, 0x00FC, 0x00E9, 0x00E2, 0x00E4, 0x00E0, 0x00E5, 0x00E7,
+ 0x00EA, 0x00EB, 0x00E8, 0x00EF, 0x00EE, 0x00EC, 0x00C4, 0x00C5,
+ 0x00C9, 0x00E6, 0x00C6, 0x00F4, 0x00F6, 0x00F2, 0x00FB, 0x00F9,
+ 0x00FF, 0x00D6, 0x00DC, 0x00F8, 0x00A3, 0x00D8, 0x00D7, 0x0192,
+ 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA,
+ 0x00BF, 0x00AE, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x00C1, 0x00C2, 0x00C0,
+ 0x00A9, 0x2563, 0x2551, 0x2557, 0x2550, 0x00A2, 0x00A5, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x00E3, 0x00C3,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x00A4,
+ 0x00F0, 0x00D0, 0x00CA, 0x00CB, 0x00C8, 0x20AC, 0x00CD, 0x00CE,
+ 0x00CF, 0x2518, 0x250C, 0x2588, 0x2584, 0x00C6, 0x00CC, 0x2580,
+ 0x00D3, 0x00DF, 0x00D4, 0x00D2, 0x00F5, 0x00D5, 0x00B5, 0x00FE,
+ 0x00DE, 0x00DA, 0x00DB, 0x00D9, 0x00FD, 0x00DD, 0x00AF, 0x00B4,
+ 0x00AD, 0x00B1, 0x2017, 0x00BE, 0x00B6, 0x00A7, 0x00F7, 0x00B8,
+ 0x00B0, 0x00A8, 0x00B7, 0x00B9, 0x00B3, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 862
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP862(0x80-0xFF) to Unicode conversion table */
+ 0x05D0, 0x05D1, 0x05D2, 0x05D3, 0x05D4, 0x05D5, 0x05D6, 0x05D7,
+ 0x05D8, 0x05D9, 0x05DA, 0x05DB, 0x05DC, 0x05DD, 0x05DE, 0x05DF,
+ 0x05E0, 0x05E1, 0x05E2, 0x05E3, 0x05E4, 0x05E5, 0x05E6, 0x05E7,
+ 0x05E8, 0x05E9, 0x05EA, 0x00A2, 0x00A3, 0x00A5, 0x20A7, 0x0192,
+ 0x00E1, 0x00ED, 0x00F3, 0x00FA, 0x00F1, 0x00D1, 0x00AA, 0x00BA,
+ 0x00BF, 0x2310, 0x00AC, 0x00BD, 0x00BC, 0x00A1, 0x00AB, 0x00BB,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+ 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+ 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+ 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+ 0x03B1, 0x00DF, 0x0393, 0x03C0, 0x03A3, 0x03C3, 0x00B5, 0x03C4,
+ 0x03A6, 0x0398, 0x03A9, 0x03B4, 0x221E, 0x03C6, 0x03B5, 0x2229,
+ 0x2261, 0x00B1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00F7, 0x2248,
+ 0x00B0, 0x2219, 0x00B7, 0x221A, 0x207F, 0x00B2, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 866
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP866(0x80-0xFF) to Unicode conversion table */
+ 0x0410, 0x0411, 0x0412, 0x0413, 0x0414, 0x0415, 0x0416, 0x0417,
+ 0x0418, 0x0419, 0x041A, 0x041B, 0x041C, 0x041D, 0x041E, 0x041F,
+ 0x0420, 0x0421, 0x0422, 0x0423, 0x0424, 0x0425, 0x0426, 0x0427,
+ 0x0428, 0x0429, 0x042A, 0x042B, 0x042C, 0x042D, 0x042E, 0x042F,
+ 0x0430, 0x0431, 0x0432, 0x0433, 0x0434, 0x0435, 0x0436, 0x0437,
+ 0x0438, 0x0439, 0x043A, 0x043B, 0x043C, 0x043D, 0x043E, 0x043F,
+ 0x2591, 0x2592, 0x2593, 0x2502, 0x2524, 0x2561, 0x2562, 0x2556,
+ 0x2555, 0x2563, 0x2551, 0x2557, 0x255D, 0x255C, 0x255B, 0x2510,
+ 0x2514, 0x2534, 0x252C, 0x251C, 0x2500, 0x253C, 0x255E, 0x255F,
+ 0x255A, 0x2554, 0x2569, 0x2566, 0x2560, 0x2550, 0x256C, 0x2567,
+ 0x2568, 0x2564, 0x2565, 0x2559, 0x2558, 0x2552, 0x2553, 0x256B,
+ 0x256A, 0x2518, 0x250C, 0x2588, 0x2584, 0x258C, 0x2590, 0x2580,
+ 0x0440, 0x0441, 0x0442, 0x0443, 0x0444, 0x0445, 0x0446, 0x0447,
+ 0x0448, 0x0449, 0x044A, 0x044B, 0x044C, 0x044D, 0x044E, 0x044F,
+ 0x0401, 0x0451, 0x0404, 0x0454, 0x0407, 0x0457, 0x040E, 0x045E,
+ 0x00B0, 0x2219, 0x00B7, 0x221A, 0x2116, 0x00A4, 0x25A0, 0x00A0
+};
+
+#elif _CODE_PAGE == 874
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP874(0x80-0xFF) to Unicode conversion table */
+ 0x20AC, 0x0000, 0x0000, 0x0000, 0x0000, 0x2026, 0x0000, 0x0000,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x00A0, 0x0E01, 0x0E02, 0x0E03, 0x0E04, 0x0E05, 0x0E06, 0x0E07,
+ 0x0E08, 0x0E09, 0x0E0A, 0x0E0B, 0x0E0C, 0x0E0D, 0x0E0E, 0x0E0F,
+ 0x0E10, 0x0E11, 0x0E12, 0x0E13, 0x0E14, 0x0E15, 0x0E16, 0x0E17,
+ 0x0E18, 0x0E19, 0x0E1A, 0x0E1B, 0x0E1C, 0x0E1D, 0x0E1E, 0x0E1F,
+ 0x0E20, 0x0E21, 0x0E22, 0x0E23, 0x0E24, 0x0E25, 0x0E26, 0x0E27,
+ 0x0E28, 0x0E29, 0x0E2A, 0x0E2B, 0x0E2C, 0x0E2D, 0x0E2E, 0x0E2F,
+ 0x0E30, 0x0E31, 0x0E32, 0x0E33, 0x0E34, 0x0E35, 0x0E36, 0x0E37,
+ 0x0E38, 0x0E39, 0x0E3A, 0x0000, 0x0000, 0x0000, 0x0000, 0x0E3F,
+ 0x0E40, 0x0E41, 0x0E42, 0x0E43, 0x0E44, 0x0E45, 0x0E46, 0x0E47,
+ 0x0E48, 0x0E49, 0x0E4A, 0x0E4B, 0x0E4C, 0x0E4D, 0x0E4E, 0x0E4F,
+ 0x0E50, 0x0E51, 0x0E52, 0x0E53, 0x0E54, 0x0E55, 0x0E56, 0x0E57,
+ 0x0E58, 0x0E59, 0x0E5A, 0x0E5B, 0x0000, 0x0000, 0x0000, 0x0000
+};
+
+#elif _CODE_PAGE == 1250
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP1250(0x80-0xFF) to Unicode conversion table */
+ 0x20AC, 0x0000, 0x201A, 0x0000, 0x201E, 0x2026, 0x2020, 0x2021,
+ 0x0000, 0x2030, 0x0160, 0x2039, 0x015A, 0x0164, 0x017D, 0x0179,
+ 0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x0000, 0x2122, 0x0161, 0x203A, 0x015B, 0x0165, 0x017E, 0x017A,
+ 0x00A0, 0x02C7, 0x02D8, 0x0141, 0x00A4, 0x0104, 0x00A6, 0x00A7,
+ 0x00A8, 0x00A9, 0x015E, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x017B,
+ 0x00B0, 0x00B1, 0x02DB, 0x0142, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+ 0x00B8, 0x0105, 0x015F, 0x00BB, 0x013D, 0x02DD, 0x013E, 0x017C,
+ 0x0154, 0x00C1, 0x00C2, 0x0102, 0x00C4, 0x0139, 0x0106, 0x00C7,
+ 0x010C, 0x00C9, 0x0118, 0x00CB, 0x011A, 0x00CD, 0x00CE, 0x010E,
+ 0x0110, 0x0143, 0x0147, 0x00D3, 0x00D4, 0x0150, 0x00D6, 0x00D7,
+ 0x0158, 0x016E, 0x00DA, 0x0170, 0x00DC, 0x00DD, 0x0162, 0x00DF,
+ 0x0155, 0x00E1, 0x00E2, 0x0103, 0x00E4, 0x013A, 0x0107, 0x00E7,
+ 0x010D, 0x00E9, 0x0119, 0x00EB, 0x011B, 0x00ED, 0x00EE, 0x010F,
+ 0x0111, 0x0144, 0x0148, 0x00F3, 0x00F4, 0x0151, 0x00F6, 0x00F7,
+ 0x0159, 0x016F, 0x00FA, 0x0171, 0x00FC, 0x00FD, 0x0163, 0x02D9
+};
+
+#elif _CODE_PAGE == 1251
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP1251(0x80-0xFF) to Unicode conversion table */
+ 0x0402, 0x0403, 0x201A, 0x0453, 0x201E, 0x2026, 0x2020, 0x2021,
+ 0x20AC, 0x2030, 0x0409, 0x2039, 0x040A, 0x040C, 0x040B, 0x040F,
+ 0x0452, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x0000, 0x2111, 0x0459, 0x203A, 0x045A, 0x045C, 0x045B, 0x045F,
+ 0x00A0, 0x040E, 0x045E, 0x0408, 0x00A4, 0x0490, 0x00A6, 0x00A7,
+ 0x0401, 0x00A9, 0x0404, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x0407,
+ 0x00B0, 0x00B1, 0x0406, 0x0456, 0x0491, 0x00B5, 0x00B6, 0x00B7,
+ 0x0451, 0x2116, 0x0454, 0x00BB, 0x0458, 0x0405, 0x0455, 0x0457,
+ 0x0410, 0x0411, 0x0412, 0x0413, 0x0414, 0x0415, 0x0416, 0x0417,
+ 0x0418, 0x0419, 0x041A, 0x041B, 0x041C, 0x041D, 0x041E, 0x041F,
+ 0x0420, 0x0421, 0x0422, 0x0423, 0x0424, 0x0425, 0x0426, 0x0427,
+ 0x0428, 0x0429, 0x042A, 0x042D, 0x042C, 0x042D, 0x042E, 0x042F,
+ 0x0430, 0x0431, 0x0432, 0x0433, 0x0434, 0x0435, 0x0436, 0x0437,
+ 0x0438, 0x0439, 0x043A, 0x043B, 0x043C, 0x043D, 0x043E, 0x043F,
+ 0x0440, 0x0441, 0x0442, 0x0443, 0x0444, 0x0445, 0x0446, 0x0447,
+ 0x0448, 0x0449, 0x044A, 0x044B, 0x044C, 0x044D, 0x044E, 0x044F
+};
+
+#elif _CODE_PAGE == 1252
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP1252(0x80-0xFF) to Unicode conversion table */
+ 0x20AC, 0x0000, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+ 0x02C6, 0x2030, 0x0160, 0x2039, 0x0152, 0x0000, 0x017D, 0x0000,
+ 0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x02DC, 0x2122, 0x0161, 0x203A, 0x0153, 0x0000, 0x017E, 0x0178,
+ 0x00A0, 0x00A1, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+ 0x00A8, 0x00A9, 0x00AA, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+ 0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+ 0x00B8, 0x00B9, 0x00BA, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00BF,
+ 0x00C0, 0x00C1, 0x00C2, 0x00C3, 0x00C4, 0x00C5, 0x00C6, 0x00C7,
+ 0x00C8, 0x00C9, 0x00CA, 0x00CB, 0x00CC, 0x00CD, 0x00CE, 0x00CF,
+ 0x00D0, 0x00D1, 0x00D2, 0x00D3, 0x00D4, 0x00D5, 0x00D6, 0x00D7,
+ 0x00D8, 0x00D9, 0x00DA, 0x00DB, 0x00DC, 0x00DD, 0x00DE, 0x00DF,
+ 0x00E0, 0x00E1, 0x00E2, 0x00E3, 0x00E4, 0x00E5, 0x00E6, 0x00E7,
+ 0x00E8, 0x00E9, 0x00EA, 0x00EB, 0x00EC, 0x00ED, 0x00EE, 0x00EF,
+ 0x00F0, 0x00F1, 0x00F2, 0x00F3, 0x00F4, 0x00F5, 0x00F6, 0x00F7,
+ 0x00F8, 0x00F9, 0x00FA, 0x00FB, 0x00FC, 0x00FD, 0x00FE, 0x00FF
+};
+
+#elif _CODE_PAGE == 1253
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP1253(0x80-0xFF) to Unicode conversion table */
+ 0x20AC, 0x0000, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+ 0x0000, 0x2030, 0x0000, 0x2039, 0x000C, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x0000, 0x2122, 0x0000, 0x203A, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x00A0, 0x0385, 0x0386, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+ 0x00A8, 0x00A9, 0x0000, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x2015,
+ 0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x0384, 0x00B5, 0x00B6, 0x00B7,
+ 0x0388, 0x0389, 0x038A, 0x00BB, 0x038C, 0x00BD, 0x038E, 0x038F,
+ 0x0390, 0x0391, 0x0392, 0x0393, 0x0394, 0x0395, 0x0396, 0x0397,
+ 0x0398, 0x0399, 0x039A, 0x039B, 0x039C, 0x039D, 0x039E, 0x039F,
+ 0x03A0, 0x03A1, 0x0000, 0x03A3, 0x03A4, 0x03A5, 0x03A6, 0x03A7,
+ 0x03A8, 0x03A9, 0x03AA, 0x03AD, 0x03AC, 0x03AD, 0x03AE, 0x03AF,
+ 0x03B0, 0x03B1, 0x03B2, 0x03B3, 0x03B4, 0x03B5, 0x03B6, 0x03B7,
+ 0x03B8, 0x03B9, 0x03BA, 0x03BB, 0x03BC, 0x03BD, 0x03BE, 0x03BF,
+ 0x03C0, 0x03C1, 0x03C2, 0x03C3, 0x03C4, 0x03C5, 0x03C6, 0x03C7,
+ 0x03C8, 0x03C9, 0x03CA, 0x03CB, 0x03CC, 0x03CD, 0x03CE, 0x0000
+};
+
+#elif _CODE_PAGE == 1254
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP1254(0x80-0xFF) to Unicode conversion table */
+ 0x20AC, 0x0000, 0x210A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+ 0x02C6, 0x2030, 0x0160, 0x2039, 0x0152, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x02DC, 0x2122, 0x0161, 0x203A, 0x0153, 0x0000, 0x0000, 0x0178,
+ 0x00A0, 0x00A1, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+ 0x00A8, 0x00A9, 0x00AA, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+ 0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+ 0x00B8, 0x00B9, 0x00BA, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00BF,
+ 0x00C0, 0x00C1, 0x00C2, 0x00C3, 0x00C4, 0x00C5, 0x00C6, 0x00C7,
+ 0x00C8, 0x00C9, 0x00CA, 0x00CB, 0x00CC, 0x00CD, 0x00CE, 0x00CF,
+ 0x011E, 0x00D1, 0x00D2, 0x00D3, 0x00D4, 0x00D5, 0x00D6, 0x00D7,
+ 0x00D8, 0x00D9, 0x00DA, 0x00BD, 0x00DC, 0x0130, 0x015E, 0x00DF,
+ 0x00E0, 0x00E1, 0x00E2, 0x00E3, 0x00E4, 0x00E5, 0x00E6, 0x00E7,
+ 0x00E8, 0x00E9, 0x00EA, 0x00EB, 0x00EC, 0x00ED, 0x00EE, 0x00EF,
+ 0x011F, 0x00F1, 0x00F2, 0x00F3, 0x00F4, 0x00F5, 0x00F6, 0x00F7,
+ 0x00F8, 0x00F9, 0x00FA, 0x00FB, 0x00FC, 0x0131, 0x015F, 0x00FF
+};
+
+#elif _CODE_PAGE == 1255
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP1255(0x80-0xFF) to Unicode conversion table */
+ 0x20AC, 0x0000, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+ 0x02C6, 0x2030, 0x0000, 0x2039, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x02DC, 0x2122, 0x0000, 0x203A, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x00A0, 0x00A1, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+ 0x00A8, 0x00A9, 0x00D7, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+ 0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+ 0x00B8, 0x00B9, 0x00F7, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00BF,
+ 0x05B0, 0x05B1, 0x05B2, 0x05B3, 0x05B4, 0x05B5, 0x05B6, 0x05B7,
+ 0x05B8, 0x05B9, 0x0000, 0x05BB, 0x05BC, 0x05BD, 0x05BE, 0x05BF,
+ 0x05C0, 0x05C1, 0x05C2, 0x05C3, 0x05F0, 0x05F1, 0x05F2, 0x05F3,
+ 0x05F4, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+ 0x05D0, 0x05D1, 0x05D2, 0x05D3, 0x05D4, 0x05D5, 0x05D6, 0x05D7,
+ 0x05D8, 0x05D9, 0x05DA, 0x05DB, 0x05DC, 0x05DD, 0x05DE, 0x05DF,
+ 0x05E0, 0x05E1, 0x05E2, 0x05E3, 0x05E4, 0x05E5, 0x05E6, 0x05E7,
+ 0x05E8, 0x05E9, 0x05EA, 0x0000, 0x0000, 0x200E, 0x200F, 0x0000
+};
+
+#elif _CODE_PAGE == 1256
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP1256(0x80-0xFF) to Unicode conversion table */
+ 0x20AC, 0x067E, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+ 0x02C6, 0x2030, 0x0679, 0x2039, 0x0152, 0x0686, 0x0698, 0x0688,
+ 0x06AF, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x06A9, 0x2122, 0x0691, 0x203A, 0x0153, 0x200C, 0x200D, 0x06BA,
+ 0x00A0, 0x060C, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+ 0x00A8, 0x00A9, 0x06BE, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+ 0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+ 0x00B8, 0x00B9, 0x061B, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x061F,
+ 0x06C1, 0x0621, 0x0622, 0x0623, 0x0624, 0x0625, 0x0626, 0x0627,
+ 0x0628, 0x0629, 0x062A, 0x062B, 0x062C, 0x062D, 0x062E, 0x062F,
+ 0x0630, 0x0631, 0x0632, 0x0633, 0x0634, 0x0635, 0x0636, 0x00D7,
+ 0x0637, 0x0638, 0x0639, 0x063A, 0x0640, 0x0640, 0x0642, 0x0643,
+ 0x00E0, 0x0644, 0x00E2, 0x0645, 0x0646, 0x0647, 0x0648, 0x00E7,
+ 0x00E8, 0x00E9, 0x00EA, 0x00EB, 0x0649, 0x064A, 0x00EE, 0x00EF,
+ 0x064B, 0x064C, 0x064D, 0x064E, 0x00F4, 0x064F, 0x0650, 0x00F7,
+ 0x0651, 0x00F9, 0x0652, 0x00FB, 0x00FC, 0x200E, 0x200F, 0x06D2
+}
+
+#elif _CODE_PAGE == 1257
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP1257(0x80-0xFF) to Unicode conversion table */
+ 0x20AC, 0x0000, 0x201A, 0x0000, 0x201E, 0x2026, 0x2020, 0x2021,
+ 0x0000, 0x2030, 0x0000, 0x2039, 0x0000, 0x00A8, 0x02C7, 0x00B8,
+ 0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x0000, 0x2122, 0x0000, 0x203A, 0x0000, 0x00AF, 0x02DB, 0x0000,
+ 0x00A0, 0x0000, 0x00A2, 0x00A3, 0x00A4, 0x0000, 0x00A6, 0x00A7,
+ 0x00D8, 0x00A9, 0x0156, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+ 0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+ 0x00B8, 0x00B9, 0x0157, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00E6,
+ 0x0104, 0x012E, 0x0100, 0x0106, 0x00C4, 0x00C5, 0x0118, 0x0112,
+ 0x010C, 0x00C9, 0x0179, 0x0116, 0x0122, 0x0136, 0x012A, 0x013B,
+ 0x0160, 0x0143, 0x0145, 0x00D3, 0x014C, 0x00D5, 0x00D6, 0x00D7,
+ 0x0172, 0x0141, 0x015A, 0x016A, 0x00DC, 0x017B, 0x017D, 0x00DF,
+ 0x0105, 0x012F, 0x0101, 0x0107, 0x00E4, 0x00E5, 0x0119, 0x0113,
+ 0x010D, 0x00E9, 0x017A, 0x0117, 0x0123, 0x0137, 0x012B, 0x013C,
+ 0x0161, 0x0144, 0x0146, 0x00F3, 0x014D, 0x00F5, 0x00F6, 0x00F7,
+ 0x0173, 0x014E, 0x015B, 0x016B, 0x00FC, 0x017C, 0x017E, 0x02D9
+};
+
+#elif _CODE_PAGE == 1258
+#define _TBLDEF 1
+static
+const WCHAR Tbl[] = { /* CP1258(0x80-0xFF) to Unicode conversion table */
+ 0x20AC, 0x0000, 0x201A, 0x0192, 0x201E, 0x2026, 0x2020, 0x2021,
+ 0x02C6, 0x2030, 0x0000, 0x2039, 0x0152, 0x0000, 0x0000, 0x0000,
+ 0x0000, 0x2018, 0x2019, 0x201C, 0x201D, 0x2022, 0x2013, 0x2014,
+ 0x02DC, 0x2122, 0x0000, 0x203A, 0x0153, 0x0000, 0x0000, 0x0178,
+ 0x00A0, 0x00A1, 0x00A2, 0x00A3, 0x00A4, 0x00A5, 0x00A6, 0x00A7,
+ 0x00A8, 0x00A9, 0x00AA, 0x00AB, 0x00AC, 0x00AD, 0x00AE, 0x00AF,
+ 0x00B0, 0x00B1, 0x00B2, 0x00B3, 0x00B4, 0x00B5, 0x00B6, 0x00B7,
+ 0x00B8, 0x00B9, 0x00BA, 0x00BB, 0x00BC, 0x00BD, 0x00BE, 0x00BF,
+ 0x00C0, 0x00C1, 0x00C2, 0x0102, 0x00C4, 0x00C5, 0x00C6, 0x00C7,
+ 0x00C8, 0x00C9, 0x00CA, 0x00CB, 0x0300, 0x00CD, 0x00CE, 0x00CF,
+ 0x0110, 0x00D1, 0x0309, 0x00D3, 0x00D4, 0x01A0, 0x00D6, 0x00D7,
+ 0x00D8, 0x00D9, 0x00DA, 0x00DB, 0x00DC, 0x01AF, 0x0303, 0x00DF,
+ 0x00E0, 0x00E1, 0x00E2, 0x0103, 0x00E4, 0x00E5, 0x00E6, 0x00E7,
+ 0x00E8, 0x00E9, 0x00EA, 0x00EB, 0x0301, 0x00ED, 0x00EE, 0x00EF,
+ 0x0111, 0x00F1, 0x0323, 0x00F3, 0x00F4, 0x01A1, 0x00F6, 0x00F7,
+ 0x00F8, 0x00F9, 0x00FA, 0x00FB, 0x00FC, 0x01B0, 0x20AB, 0x00FF
+};
+
+#endif
+
+
+#if !_TBLDEF || !_USE_LFN
+#error This file is not needed in current configuration. Remove from the project.
+#endif
+
+
+WCHAR ff_convert ( /* Converted character, Returns zero on error */
+ WCHAR src, /* Character code to be converted */
+ UINT dir /* 0: Unicode to OEMCP, 1: OEMCP to Unicode */
+)
+{
+ WCHAR c;
+
+
+ if (src < 0x80) { /* ASCII */
+ c = src;
+
+ } else {
+ if (dir) { /* OEMCP to Unicode */
+ c = (src >= 0x100) ? 0 : Tbl[src - 0x80];
+
+ } else { /* Unicode to OEMCP */
+ for (c = 0; c < 0x80; c++) {
+ if (src == Tbl[c]) break;
+ }
+ c = (c + 0x80) & 0xFF;
+ }
+ }
+
+ return c;
+}
+
+
+WCHAR ff_wtoupper ( /* Upper converted character */
+ WCHAR chr /* Input character */
+)
+{
+ static const WCHAR tbl_lower[] = { 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F, 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7A, 0xA1, 0x00A2, 0x00A3, 0x00A5, 0x00AC, 0x00AF, 0xE0, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7, 0xE8, 0xE9, 0xEA, 0xEB, 0xEC, 0xED, 0xEE, 0xEF, 0xF0, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF8, 0xF9, 0xFA, 0xFB, 0xFC, 0xFD, 0xFE, 0x0FF, 0x101, 0x103, 0x105, 0x107, 0x109, 0x10B, 0x10D, 0x10F, 0x111, 0x113, 0x115, 0x117, 0x119, 0x11B, 0x11D, 0x11F, 0x121, 0x123, 0x125, 0x127, 0x129, 0x12B, 0x12D, 0x12F, 0x131, 0x133, 0x135, 0x137, 0x13A, 0x13C, 0x13E, 0x140, 0x142, 0x144, 0x146, 0x148, 0x14B, 0x14D, 0x14F, 0x151, 0x153, 0x155, 0x157, 0x159, 0x15B, 0x15D, 0x15F, 0x161, 0x163, 0x165, 0x167, 0x169, 0x16B, 0x16D, 0x16F, 0x171, 0x173, 0x175, 0x177, 0x17A, 0x17C, 0x17E, 0x192, 0x3B1, 0x3B2, 0x3B3, 0x3B4, 0x3B5, 0x3B6, 0x3B7, 0x3B8, 0x3B9, 0x3BA, 0x3BB, 0x3BC, 0x3BD, 0x3BE, 0x3BF, 0x3C0, 0x3C1, 0x3C3, 0x3C4, 0x3C5, 0x3C6, 0x3C7, 0x3C8, 0x3C9, 0x3CA, 0x430, 0x431, 0x432, 0x433, 0x434, 0x435, 0x436, 0x437, 0x438, 0x439, 0x43A, 0x43B, 0x43C, 0x43D, 0x43E, 0x43F, 0x440, 0x441, 0x442, 0x443, 0x444, 0x445, 0x446, 0x447, 0x448, 0x449, 0x44A, 0x44B, 0x44C, 0x44D, 0x44E, 0x44F, 0x451, 0x452, 0x453, 0x454, 0x455, 0x456, 0x457, 0x458, 0x459, 0x45A, 0x45B, 0x45C, 0x45E, 0x45F, 0x2170, 0x2171, 0x2172, 0x2173, 0x2174, 0x2175, 0x2176, 0x2177, 0x2178, 0x2179, 0x217A, 0x217B, 0x217C, 0x217D, 0x217E, 0x217F, 0xFF41, 0xFF42, 0xFF43, 0xFF44, 0xFF45, 0xFF46, 0xFF47, 0xFF48, 0xFF49, 0xFF4A, 0xFF4B, 0xFF4C, 0xFF4D, 0xFF4E, 0xFF4F, 0xFF50, 0xFF51, 0xFF52, 0xFF53, 0xFF54, 0xFF55, 0xFF56, 0xFF57, 0xFF58, 0xFF59, 0xFF5A, 0 };
+ static const WCHAR tbl_upper[] = { 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, 0x5A, 0x21, 0xFFE0, 0xFFE1, 0xFFE5, 0xFFE2, 0xFFE3, 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD8, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xDE, 0x178, 0x100, 0x102, 0x104, 0x106, 0x108, 0x10A, 0x10C, 0x10E, 0x110, 0x112, 0x114, 0x116, 0x118, 0x11A, 0x11C, 0x11E, 0x120, 0x122, 0x124, 0x126, 0x128, 0x12A, 0x12C, 0x12E, 0x130, 0x132, 0x134, 0x136, 0x139, 0x13B, 0x13D, 0x13F, 0x141, 0x143, 0x145, 0x147, 0x14A, 0x14C, 0x14E, 0x150, 0x152, 0x154, 0x156, 0x158, 0x15A, 0x15C, 0x15E, 0x160, 0x162, 0x164, 0x166, 0x168, 0x16A, 0x16C, 0x16E, 0x170, 0x172, 0x174, 0x176, 0x179, 0x17B, 0x17D, 0x191, 0x391, 0x392, 0x393, 0x394, 0x395, 0x396, 0x397, 0x398, 0x399, 0x39A, 0x39B, 0x39C, 0x39D, 0x39E, 0x39F, 0x3A0, 0x3A1, 0x3A3, 0x3A4, 0x3A5, 0x3A6, 0x3A7, 0x3A8, 0x3A9, 0x3AA, 0x410, 0x411, 0x412, 0x413, 0x414, 0x415, 0x416, 0x417, 0x418, 0x419, 0x41A, 0x41B, 0x41C, 0x41D, 0x41E, 0x41F, 0x420, 0x421, 0x422, 0x423, 0x424, 0x425, 0x426, 0x427, 0x428, 0x429, 0x42A, 0x42B, 0x42C, 0x42D, 0x42E, 0x42F, 0x401, 0x402, 0x403, 0x404, 0x405, 0x406, 0x407, 0x408, 0x409, 0x40A, 0x40B, 0x40C, 0x40E, 0x40F, 0x2160, 0x2161, 0x2162, 0x2163, 0x2164, 0x2165, 0x2166, 0x2167, 0x2168, 0x2169, 0x216A, 0x216B, 0x216C, 0x216D, 0x216E, 0x216F, 0xFF21, 0xFF22, 0xFF23, 0xFF24, 0xFF25, 0xFF26, 0xFF27, 0xFF28, 0xFF29, 0xFF2A, 0xFF2B, 0xFF2C, 0xFF2D, 0xFF2E, 0xFF2F, 0xFF30, 0xFF31, 0xFF32, 0xFF33, 0xFF34, 0xFF35, 0xFF36, 0xFF37, 0xFF38, 0xFF39, 0xFF3A, 0 };
+ int i;
+
+
+ for (i = 0; tbl_lower[i] && chr != tbl_lower[i]; i++) ;
+
+ return tbl_lower[i] ? tbl_upper[i] : chr;
+}
--- /dev/null
+/*-----------------------------------------------------------------------
+/ Low level disk interface modlue include file R0.05 (C)ChaN, 2007
+/-----------------------------------------------------------------------*/
+
+#ifndef _DISKIO
+
+#define _READONLY 0 /* 1: Read-only mode */
+#define _USE_IOCTL 1
+
+#include "integer.h"
+
+
+/* Status of Disk Functions */
+typedef BYTE DSTATUS;
+
+/* Results of Disk Functions */
+typedef enum {
+ RES_OK = 0, /* 0: Successful */
+ RES_ERROR, /* 1: R/W Error */
+ RES_WRPRT, /* 2: Write Protected */
+ RES_NOTRDY, /* 3: Not Ready */
+ RES_PARERR /* 4: Invalid Parameter */
+} DRESULT;
+
+
+/*---------------------------------------*/
+/* Prototypes for disk control functions */
+
+DSTATUS disk_initialize (BYTE);
+DSTATUS disk_status (BYTE);
+DRESULT disk_read (BYTE, BYTE*, DWORD, BYTE);
+#if _READONLY == 0
+DRESULT disk_write (BYTE, const BYTE*, DWORD, BYTE);
+#endif
+DRESULT disk_ioctl (BYTE, BYTE, void*);
+void disk_timerproc (void);
+
+
+
+
+/* Disk Status Bits (DSTATUS) */
+
+#define STA_NOINIT 0x01 /* Drive not initialized */
+#define STA_NODISK 0x02 /* No medium in the drive */
+#define STA_PROTECT 0x04 /* Write protected */
+
+
+
+/* Command code for disk_ioctrl() */
+
+/* Generic command */
+#define CTRL_SYNC 0 /* Mandatory for write functions */
+#define GET_SECTOR_COUNT 1 /* Mandatory for only f_mkfs() */
+#define GET_SECTOR_SIZE 2
+#define GET_BLOCK_SIZE 3 /* Mandatory for only f_mkfs() */
+#define CTRL_POWER 4
+#define CTRL_LOCK 5
+#define CTRL_EJECT 6
+/* MMC/SDC command */
+#define MMC_GET_TYPE 10
+#define MMC_GET_CSD 11
+#define MMC_GET_CID 12
+#define MMC_GET_OCR 13
+#define MMC_GET_SDSTAT 14
+/* ATA/CF command */
+#define ATA_GET_REV 20
+#define ATA_GET_MODEL 21
+#define ATA_GET_SN 22
+
+
+
+/* Card type flags (CardType) */
+#define CT_MMC 0x01 /* MMC ver 3 */
+#define CT_SD1 0x02 /* SD ver 1 */
+#define CT_SD2 0x04 /* SD ver 2 */
+#define CT_SDC (CT_SD1|CT_SD2) /* SD */
+#define CT_BLOCK 0x08 /* Block addressing */
+
+
+#define _DISKIO
+#endif
--- /dev/null
+/*----------------------------------------------------------------------------/
+/ FatFs - FAT file system module R0.07e (C)ChaN, 2009
+/-----------------------------------------------------------------------------/
+/ FatFs module is a generic FAT file system module for small embedded systems.
+/ This is a free software that opened for education, research and commercial
+/ developments under license policy of following trems.
+/
+/ Copyright (C) 2009, ChaN, all right reserved.
+/
+/ * The FatFs module is a free software and there is NO WARRANTY.
+/ * No restriction on use. You can use, modify and redistribute it for
+/ personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY.
+/ * Redistributions of source code must retain the above copyright notice.
+/
+/-----------------------------------------------------------------------------/
+/ Feb 26,'06 R0.00 Prototype.
+/
+/ Apr 29,'06 R0.01 First stable version.
+/
+/ Jun 01,'06 R0.02 Added FAT12 support.
+/ Removed unbuffered mode.
+/ Fixed a problem on small (<32M) patition.
+/ Jun 10,'06 R0.02a Added a configuration option (_FS_MINIMUM).
+/
+/ Sep 22,'06 R0.03 Added f_rename().
+/ Changed option _FS_MINIMUM to _FS_MINIMIZE.
+/ Dec 11,'06 R0.03a Improved cluster scan algolithm to write files fast.
+/ Fixed f_mkdir() creates incorrect directory on FAT32.
+/
+/ Feb 04,'07 R0.04 Supported multiple drive system.
+/ Changed some interfaces for multiple drive system.
+/ Changed f_mountdrv() to f_mount().
+/ Added f_mkfs().
+/ Apr 01,'07 R0.04a Supported multiple partitions on a plysical drive.
+/ Added a capability of extending file size to f_lseek().
+/ Added minimization level 3.
+/ Fixed an endian sensitive code in f_mkfs().
+/ May 05,'07 R0.04b Added a configuration option _USE_NTFLAG.
+/ Added FSInfo support.
+/ Fixed DBCS name can result FR_INVALID_NAME.
+/ Fixed short seek (<= csize) collapses the file object.
+/
+/ Aug 25,'07 R0.05 Changed arguments of f_read(), f_write() and f_mkfs().
+/ Fixed f_mkfs() on FAT32 creates incorrect FSInfo.
+/ Fixed f_mkdir() on FAT32 creates incorrect directory.
+/ Feb 03,'08 R0.05a Added f_truncate() and f_utime().
+/ Fixed off by one error at FAT sub-type determination.
+/ Fixed btr in f_read() can be mistruncated.
+/ Fixed cached sector is not flushed when create and close
+/ without write.
+/
+/ Apr 01,'08 R0.06 Added fputc(), fputs(), fprintf() and fgets().
+/ Improved performance of f_lseek() on moving to the same
+/ or following cluster.
+/
+/ Apr 01,'09 R0.07 Merged Tiny-FatFs as a buffer configuration option.
+/ Added long file name support.
+/ Added multiple code page support.
+/ Added re-entrancy for multitask operation.
+/ Added auto cluster size selection to f_mkfs().
+/ Added rewind option to f_readdir().
+/ Changed result code of critical errors.
+/ Renamed string functions to avoid name collision.
+/ Apr 14,'09 R0.07a Separated out OS dependent code on reentrant cfg.
+/ Added multiple sector size support.
+/ Jun 21,'09 R0.07c Fixed f_unlink() can return FR_OK on error.
+/ Fixed wrong cache control in f_lseek().
+/ Added relative path feature.
+/ Added f_chdir() and f_chdrive().
+/ Added proper case conversion to extended char.
+/ Nov 03,'09 R0.07e Separated out configuration options from ff.h to ffconf.h.
+/ Fixed f_unlink() fails to remove a sub-dir on _FS_RPATH.
+/ Fixed name matching error on the 13 char boundary.
+/ Added a configuration option, _LFN_UNICODE.
+/ Changed f_readdir() to return the SFN with always upper
+/ case on non-LFN cfg.
+/---------------------------------------------------------------------------*/
+
+#include "projectconfig.h"
+#include "ff.h" /* FatFs configurations and declarations */
+#include "diskio.h" /* Declarations of low level disk I/O functions */
+
+/*--------------------------------------------------------------------------
+
+ Module Private Definitions
+
+---------------------------------------------------------------------------*/
+
+#if _FATFS != 0x007E
+#error Wrong include file (ff.h).
+#endif
+
+#if _FS_REENTRANT
+#if _USE_LFN == 1
+#error Static LFN work area must not be used in re-entrant configuration.
+#endif
+#define ENTER_FF(fs) { if (!lock_fs(fs)) return FR_TIMEOUT; }
+#define LEAVE_FF(fs, res) { unlock_fs(fs, res); return res; }
+
+#else
+#define ENTER_FF(fs)
+#define LEAVE_FF(fs, res) return res
+
+#endif
+
+#define ABORT(fs, res) { fp->flag |= FA__ERROR; LEAVE_FF(fs, res); }
+
+#ifndef NULL
+#define NULL 0
+#endif
+
+/* Name status flags */
+#define NS 11 /* Offset of name status byte */
+#define NS_LOSS 0x01 /* Out of 8.3 format */
+#define NS_LFN 0x02 /* Force to create LFN entry */
+#define NS_LAST 0x04 /* Last segment */
+#define NS_BODY 0x08 /* Lower case flag (body) */
+#define NS_EXT 0x10 /* Lower case flag (ext) */
+#define NS_DOT 0x20 /* Dot entry */
+
+
+
+
+/*--------------------------------------------------------------------------
+
+ Private Work Area
+
+---------------------------------------------------------------------------*/
+
+#if _DRIVES < 1 || _DRIVES > 9
+#error Number of drives must be 1-9.
+#endif
+static
+FATFS *FatFs[_DRIVES]; /* Pointer to the file system objects (logical drives) */
+
+static
+WORD Fsid; /* File system mount ID */
+
+#if _FS_RPATH
+static
+BYTE Drive; /* Current drive */
+#endif
+
+
+#if _USE_LFN == 1 /* LFN with static LFN working buffer */
+static
+WCHAR LfnBuf[_MAX_LFN + 1];
+#define NAMEBUF(sp,lp) BYTE sp[12]; WCHAR *lp = LfnBuf
+#define INITBUF(dj,sp,lp) dj.fn = sp; dj.lfn = lp
+
+#elif _USE_LFN > 1 /* LFN with dynamic LFN working buffer */
+#define NAMEBUF(sp,lp) BYTE sp[12]; WCHAR lbuf[_MAX_LFN + 1], *lp = lbuf
+#define INITBUF(dj,sp,lp) dj.fn = sp; dj.lfn = lp
+
+#else /* No LFN */
+#define NAMEBUF(sp,lp) BYTE sp[12]
+#define INITBUF(dj,sp,lp) dj.fn = sp
+
+#endif
+
+
+
+
+/*--------------------------------------------------------------------------
+
+ Module Private Functions
+
+---------------------------------------------------------------------------*/
+
+
+/*-----------------------------------------------------------------------*/
+/* String functions */
+/*-----------------------------------------------------------------------*/
+
+/* Copy memory to memory */
+static
+void mem_cpy (void* dst, const void* src, int cnt) {
+ char *d = (char*)dst;
+ const char *s = (const char *)src;
+ while (cnt--) *d++ = *s++;
+}
+
+/* Fill memory */
+static
+void mem_set (void* dst, int val, int cnt) {
+ char *d = (char*)dst;
+ while (cnt--) *d++ = (char)val;
+}
+
+/* Compare memory to memory */
+static
+int mem_cmp (const void* dst, const void* src, int cnt) {
+ const char *d = (const char *)dst, *s = (const char *)src;
+ int r = 0;
+ while (cnt-- && (r = *d++ - *s++) == 0) ;
+ return r;
+}
+
+/* Check if chr is contained in the string */
+static
+int chk_chr (const char* str, int chr) {
+ while (*str && *str != chr) str++;
+ return *str;
+}
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Request/Release grant to access the volume */
+/*-----------------------------------------------------------------------*/
+#if _FS_REENTRANT
+
+static
+BOOL lock_fs (
+ FATFS *fs /* File system object */
+)
+{
+ return ff_req_grant(fs->sobj);
+}
+
+
+static
+void unlock_fs (
+ FATFS *fs, /* File system object */
+ FRESULT res /* Result code to be returned */
+)
+{
+ if (res != FR_NOT_ENABLED &&
+ res != FR_INVALID_DRIVE &&
+ res != FR_INVALID_OBJECT &&
+ res != FR_TIMEOUT) {
+ ff_rel_grant(fs->sobj);
+ }
+}
+#endif
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Change window offset */
+/*-----------------------------------------------------------------------*/
+
+static
+FRESULT move_window (
+ FATFS *fs, /* File system object */
+ DWORD sector /* Sector number to make apperance in the fs->win[] */
+) /* Move to zero only writes back dirty window */
+{
+ DWORD wsect;
+
+
+ wsect = fs->winsect;
+ if (wsect != sector) { /* Changed current window */
+#if !_FS_READONLY
+ if (fs->wflag) { /* Write back dirty window if needed */
+ if (disk_write(fs->drive, fs->win, wsect, 1) != RES_OK)
+ return FR_DISK_ERR;
+ fs->wflag = 0;
+ if (wsect < (fs->fatbase + fs->sects_fat)) { /* In FAT area */
+ BYTE nf;
+ for (nf = fs->n_fats; nf > 1; nf--) { /* Refrect the change to all FAT copies */
+ wsect += fs->sects_fat;
+ disk_write(fs->drive, fs->win, wsect, 1);
+ }
+ }
+ }
+#endif
+ if (sector) {
+ if (disk_read(fs->drive, fs->win, sector, 1) != RES_OK)
+ return FR_DISK_ERR;
+ fs->winsect = sector;
+ }
+ }
+
+ return FR_OK;
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Clean-up cached data */
+/*-----------------------------------------------------------------------*/
+#if !_FS_READONLY
+static
+FRESULT sync ( /* FR_OK: successful, FR_DISK_ERR: failed */
+ FATFS *fs /* File system object */
+)
+{
+ FRESULT res;
+
+
+ res = move_window(fs, 0);
+ if (res == FR_OK) {
+ /* Update FSInfo sector if needed */
+ if (fs->fs_type == FS_FAT32 && fs->fsi_flag) {
+ fs->winsect = 0;
+ mem_set(fs->win, 0, 512);
+ ST_WORD(fs->win+BS_55AA, 0xAA55);
+ ST_DWORD(fs->win+FSI_LeadSig, 0x41615252);
+ ST_DWORD(fs->win+FSI_StrucSig, 0x61417272);
+ ST_DWORD(fs->win+FSI_Free_Count, fs->free_clust);
+ ST_DWORD(fs->win+FSI_Nxt_Free, fs->last_clust);
+ disk_write(fs->drive, fs->win, fs->fsi_sector, 1);
+ fs->fsi_flag = 0;
+ }
+ /* Make sure that no pending write process in the physical drive */
+ if (disk_ioctl(fs->drive, CTRL_SYNC, (void*)NULL) != RES_OK)
+ res = FR_DISK_ERR;
+ }
+
+ return res;
+}
+#endif
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* FAT access - Read value of a FAT entry */
+/*-----------------------------------------------------------------------*/
+
+
+DWORD get_fat ( /* 0xFFFFFFFF:Disk error, 1:Interal error, Else:Cluster status */
+ FATFS *fs, /* File system object */
+ DWORD clst /* Cluster# to get the link information */
+)
+{
+ UINT wc, bc;
+ DWORD fsect;
+
+
+ if (clst < 2 || clst >= fs->max_clust) /* Range check */
+ return 1;
+
+ fsect = fs->fatbase;
+ switch (fs->fs_type) {
+ case FS_FAT12 :
+ bc = clst; bc += bc / 2;
+ if (move_window(fs, fsect + (bc / SS(fs)))) break;
+ wc = fs->win[bc & (SS(fs) - 1)]; bc++;
+ if (move_window(fs, fsect + (bc / SS(fs)))) break;
+ wc |= (WORD)fs->win[bc & (SS(fs) - 1)] << 8;
+ return (clst & 1) ? (wc >> 4) : (wc & 0xFFF);
+
+ case FS_FAT16 :
+ if (move_window(fs, fsect + (clst / (SS(fs) / 2)))) break;
+ return LD_WORD(&fs->win[((WORD)clst * 2) & (SS(fs) - 1)]);
+
+ case FS_FAT32 :
+ if (move_window(fs, fsect + (clst / (SS(fs) / 4)))) break;
+ return LD_DWORD(&fs->win[((WORD)clst * 4) & (SS(fs) - 1)]) & 0x0FFFFFFF;
+ }
+
+ return 0xFFFFFFFF; /* An error occured at the disk I/O layer */
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* FAT access - Change value of a FAT entry */
+/*-----------------------------------------------------------------------*/
+#if !_FS_READONLY
+
+FRESULT put_fat (
+ FATFS *fs, /* File system object */
+ DWORD clst, /* Cluster# to be changed in range of 2 to fs->max_clust - 1 */
+ DWORD val /* New value to mark the cluster */
+)
+{
+ UINT bc;
+ BYTE *p;
+ DWORD fsect;
+ FRESULT res;
+
+
+ if (clst < 2 || clst >= fs->max_clust) { /* Range check */
+ res = FR_INT_ERR;
+
+ } else {
+ fsect = fs->fatbase;
+ switch (fs->fs_type) {
+ case FS_FAT12 :
+ bc = clst; bc += bc / 2;
+ res = move_window(fs, fsect + (bc / SS(fs)));
+ if (res != FR_OK) break;
+ p = &fs->win[bc & (SS(fs) - 1)];
+ *p = (clst & 1) ? ((*p & 0x0F) | ((BYTE)val << 4)) : (BYTE)val;
+ bc++;
+ fs->wflag = 1;
+ res = move_window(fs, fsect + (bc / SS(fs)));
+ if (res != FR_OK) break;
+ p = &fs->win[bc & (SS(fs) - 1)];
+ *p = (clst & 1) ? (BYTE)(val >> 4) : ((*p & 0xF0) | ((BYTE)(val >> 8) & 0x0F));
+ break;
+
+ case FS_FAT16 :
+ res = move_window(fs, fsect + (clst / (SS(fs) / 2)));
+ if (res != FR_OK) break;
+ ST_WORD(&fs->win[((WORD)clst * 2) & (SS(fs) - 1)], (WORD)val);
+ break;
+
+ case FS_FAT32 :
+ res = move_window(fs, fsect + (clst / (SS(fs) / 4)));
+ if (res != FR_OK) break;
+ ST_DWORD(&fs->win[((WORD)clst * 4) & (SS(fs) - 1)], val);
+ break;
+
+ default :
+ res = FR_INT_ERR;
+ }
+ fs->wflag = 1;
+ }
+
+ return res;
+}
+#endif /* !_FS_READONLY */
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* FAT handling - Remove a cluster chain */
+/*-----------------------------------------------------------------------*/
+#if !_FS_READONLY
+static
+FRESULT remove_chain (
+ FATFS *fs, /* File system object */
+ DWORD clst /* Cluster# to remove a chain from */
+)
+{
+ FRESULT res;
+ DWORD nxt;
+
+
+ if (clst < 2 || clst >= fs->max_clust) { /* Check the range of cluster# */
+ res = FR_INT_ERR;
+
+ } else {
+ res = FR_OK;
+ while (clst < fs->max_clust) { /* Not a last link? */
+ nxt = get_fat(fs, clst); /* Get cluster status */
+ if (nxt == 0) break; /* Empty cluster? */
+ if (nxt == 1) { res = FR_INT_ERR; break; } /* Internal error? */
+ if (nxt == 0xFFFFFFFF) { res = FR_DISK_ERR; break; } /* Disk error? */
+ res = put_fat(fs, clst, 0); /* Mark the cluster "empty" */
+ if (res != FR_OK) break;
+ if (fs->free_clust != 0xFFFFFFFF) { /* Update FSInfo */
+ fs->free_clust++;
+ fs->fsi_flag = 1;
+ }
+ clst = nxt; /* Next cluster */
+ }
+ }
+
+ return res;
+}
+#endif
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* FAT handling - Stretch or Create a cluster chain */
+/*-----------------------------------------------------------------------*/
+#if !_FS_READONLY
+static
+DWORD create_chain ( /* 0:No free cluster, 1:Internal error, 0xFFFFFFFF:Disk error, >=2:New cluster# */
+ FATFS *fs, /* File system object */
+ DWORD clst /* Cluster# to stretch. 0 means create a new chain. */
+)
+{
+ DWORD cs, ncl, scl, mcl;
+
+
+ mcl = fs->max_clust;
+ if (clst == 0) { /* Create new chain */
+ scl = fs->last_clust; /* Get suggested start point */
+ if (scl == 0 || scl >= mcl) scl = 1;
+ }
+ else { /* Stretch existing chain */
+ cs = get_fat(fs, clst); /* Check the cluster status */
+ if (cs < 2) return 1; /* It is an invalid cluster */
+ if (cs < mcl) return cs; /* It is already followed by next cluster */
+ scl = clst;
+ }
+
+ ncl = scl; /* Start cluster */
+ for (;;) {
+ ncl++; /* Next cluster */
+ if (ncl >= mcl) { /* Wrap around */
+ ncl = 2;
+ if (ncl > scl) return 0; /* No free custer */
+ }
+ cs = get_fat(fs, ncl); /* Get the cluster status */
+ if (cs == 0) break; /* Found a free cluster */
+ if (cs == 0xFFFFFFFF || cs == 1)/* An error occured */
+ return cs;
+ if (ncl == scl) return 0; /* No free custer */
+ }
+
+ if (put_fat(fs, ncl, 0x0FFFFFFF)) /* Mark the new cluster "in use" */
+ return 0xFFFFFFFF;
+ if (clst != 0) { /* Link it to the previous one if needed */
+ if (put_fat(fs, clst, ncl))
+ return 0xFFFFFFFF;
+ }
+
+ fs->last_clust = ncl; /* Update FSINFO */
+ if (fs->free_clust != 0xFFFFFFFF) {
+ fs->free_clust--;
+ fs->fsi_flag = 1;
+ }
+
+ return ncl; /* Return new cluster number */
+}
+#endif /* !_FS_READONLY */
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Get sector# from cluster# */
+/*-----------------------------------------------------------------------*/
+
+
+DWORD clust2sect ( /* !=0: Sector number, 0: Failed - invalid cluster# */
+ FATFS *fs, /* File system object */
+ DWORD clst /* Cluster# to be converted */
+)
+{
+ clst -= 2;
+ if (clst >= (fs->max_clust - 2)) return 0; /* Invalid cluster# */
+ return clst * fs->csize + fs->database;
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Directory handling - Seek directory index */
+/*-----------------------------------------------------------------------*/
+
+static
+FRESULT dir_seek (
+ DIR *dj, /* Pointer to directory object */
+ WORD idx /* Directory index number */
+)
+{
+ DWORD clst;
+ WORD ic;
+
+
+ dj->index = idx;
+ clst = dj->sclust;
+ if (clst == 1 || clst >= dj->fs->max_clust) /* Check start cluster range */
+ return FR_INT_ERR;
+ if (!clst && dj->fs->fs_type == FS_FAT32) /* Replace cluster# 0 with root cluster# if in FAT32 */
+ clst = dj->fs->dirbase;
+
+ if (clst == 0) { /* Static table */
+ dj->clust = clst;
+ if (idx >= dj->fs->n_rootdir) /* Index is out of range */
+ return FR_INT_ERR;
+ dj->sect = dj->fs->dirbase + idx / (SS(dj->fs) / 32); /* Sector# */
+ }
+ else { /* Dynamic table */
+ ic = SS(dj->fs) / 32 * dj->fs->csize; /* Entries per cluster */
+ while (idx >= ic) { /* Follow cluster chain */
+ clst = get_fat(dj->fs, clst); /* Get next cluster */
+ if (clst == 0xFFFFFFFF) return FR_DISK_ERR; /* Disk error */
+ if (clst < 2 || clst >= dj->fs->max_clust) /* Reached to end of table or int error */
+ return FR_INT_ERR;
+ idx -= ic;
+ }
+ dj->clust = clst;
+ dj->sect = clust2sect(dj->fs, clst) + idx / (SS(dj->fs) / 32); /* Sector# */
+ }
+
+ dj->dir = dj->fs->win + (idx % (SS(dj->fs) / 32)) * 32; /* Ptr to the entry in the sector */
+
+ return FR_OK; /* Seek succeeded */
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Directory handling - Move directory index next */
+/*-----------------------------------------------------------------------*/
+
+static
+FRESULT dir_next ( /* FR_OK:Succeeded, FR_NO_FILE:End of table, FR_DENIED:EOT and could not streach */
+ DIR *dj, /* Pointer to directory object */
+ BOOL streach /* FALSE: Do not streach table, TRUE: Streach table if needed */
+)
+{
+ DWORD clst;
+ WORD i;
+
+
+ i = dj->index + 1;
+ if (!i || !dj->sect) /* Report EOT when index has reached 65535 */
+ return FR_NO_FILE;
+
+ if (!(i % (SS(dj->fs) / 32))) { /* Sector changed? */
+ dj->sect++; /* Next sector */
+
+ if (dj->clust == 0) { /* Static table */
+ if (i >= dj->fs->n_rootdir) /* Report EOT when end of table */
+ return FR_NO_FILE;
+ }
+ else { /* Dynamic table */
+ if (((i / (SS(dj->fs) / 32)) & (dj->fs->csize - 1)) == 0) { /* Cluster changed? */
+ clst = get_fat(dj->fs, dj->clust); /* Get next cluster */
+ if (clst <= 1) return FR_INT_ERR;
+ if (clst == 0xFFFFFFFF) return FR_DISK_ERR;
+ if (clst >= dj->fs->max_clust) { /* When it reached end of dynamic table */
+#if !_FS_READONLY
+ BYTE c;
+ if (!streach) return FR_NO_FILE; /* When do not streach, report EOT */
+ clst = create_chain(dj->fs, dj->clust); /* Streach cluster chain */
+ if (clst == 0) return FR_DENIED; /* No free cluster */
+ if (clst == 1) return FR_INT_ERR;
+ if (clst == 0xFFFFFFFF) return FR_DISK_ERR;
+ /* Clean-up streached table */
+ if (move_window(dj->fs, 0)) return FR_DISK_ERR; /* Flush active window */
+ mem_set(dj->fs->win, 0, SS(dj->fs)); /* Clear window buffer */
+ dj->fs->winsect = clust2sect(dj->fs, clst); /* Cluster start sector */
+ for (c = 0; c < dj->fs->csize; c++) { /* Fill the new cluster with 0 */
+ dj->fs->wflag = 1;
+ if (move_window(dj->fs, 0)) return FR_DISK_ERR;
+ dj->fs->winsect++;
+ }
+ dj->fs->winsect -= c; /* Rewind window address */
+#else
+ return FR_NO_FILE; /* Report EOT */
+#endif
+ }
+ dj->clust = clst; /* Initialize data for new cluster */
+ dj->sect = clust2sect(dj->fs, clst);
+ }
+ }
+ }
+
+ dj->index = i;
+ dj->dir = dj->fs->win + (i % (SS(dj->fs) / 32)) * 32;
+
+ return FR_OK;
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* LFN handling - Test/Pick/Fit an LFN segment from/to directory entry */
+/*-----------------------------------------------------------------------*/
+#if _USE_LFN
+static
+const BYTE LfnOfs[] = {1,3,5,7,9,14,16,18,20,22,24,28,30}; /* Offset of LFN chars in the directory entry */
+
+
+static
+BOOL cmp_lfn ( /* TRUE:Matched, FALSE:Not matched */
+ WCHAR *lfnbuf, /* Pointer to the LFN to be compared */
+ BYTE *dir /* Pointer to the directory entry containing a part of LFN */
+)
+{
+ int i, s;
+ WCHAR wc, uc;
+
+
+ i = ((dir[LDIR_Ord] & 0xBF) - 1) * 13; /* Get offset in the LFN buffer */
+ s = 0; wc = 1;
+ do {
+ uc = LD_WORD(dir+LfnOfs[s]); /* Pick an LFN character from the entry */
+ if (wc) { /* Last char has not been processed */
+ wc = ff_wtoupper(uc); /* Convert it to upper case */
+ if (i >= _MAX_LFN || wc != ff_wtoupper(lfnbuf[i++])) /* Compare it */
+ return FALSE; /* Not matched */
+ } else {
+ if (uc != 0xFFFF) return FALSE; /* Check filler */
+ }
+ } while (++s < 13); /* Repeat until all chars in the entry are checked */
+
+ if ((dir[LDIR_Ord] & 0x40) && wc && lfnbuf[i]) /* Last segment matched but different length */
+ return FALSE;
+
+ return TRUE; /* The part of LFN matched */
+}
+
+
+
+static
+BOOL pick_lfn ( /* TRUE:Succeeded, FALSE:Buffer overflow */
+ WCHAR *lfnbuf, /* Pointer to the Unicode-LFN buffer */
+ BYTE *dir /* Pointer to the directory entry */
+)
+{
+ int i, s;
+ WCHAR wc, uc;
+
+
+ i = ((dir[LDIR_Ord] & 0x3F) - 1) * 13; /* Offset in the LFN buffer */
+
+ s = 0; wc = 1;
+ do {
+ uc = LD_WORD(dir+LfnOfs[s]); /* Pick an LFN character from the entry */
+ if (wc) { /* Last char has not been processed */
+ if (i >= _MAX_LFN) return FALSE; /* Buffer overflow? */
+ lfnbuf[i++] = wc = uc; /* Store it */
+ } else {
+ if (uc != 0xFFFF) return FALSE; /* Check filler */
+ }
+ } while (++s < 13); /* Read all character in the entry */
+
+ if (dir[LDIR_Ord] & 0x40) { /* Put terminator if it is the last LFN part */
+ if (i >= _MAX_LFN) return FALSE; /* Buffer overflow? */
+ lfnbuf[i] = 0;
+ }
+
+ return TRUE;
+}
+
+
+#if !_FS_READONLY
+static
+void fit_lfn (
+ const WCHAR *lfnbuf, /* Pointer to the LFN buffer */
+ BYTE *dir, /* Pointer to the directory entry */
+ BYTE ord, /* LFN order (1-20) */
+ BYTE sum /* SFN sum */
+)
+{
+ int i, s;
+ WCHAR wc;
+
+
+ dir[LDIR_Chksum] = sum; /* Set check sum */
+ dir[LDIR_Attr] = AM_LFN; /* Set attribute. LFN entry */
+ dir[LDIR_Type] = 0;
+ ST_WORD(dir+LDIR_FstClusLO, 0);
+
+ i = (ord - 1) * 13; /* Get offset in the LFN buffer */
+ s = wc = 0;
+ do {
+ if (wc != 0xFFFF) wc = lfnbuf[i++]; /* Get an effective char */
+ ST_WORD(dir+LfnOfs[s], wc); /* Put it */
+ if (!wc) wc = 0xFFFF; /* Padding chars following last char */
+ } while (++s < 13);
+ if (wc == 0xFFFF || !lfnbuf[i]) ord |= 0x40; /* Bottom LFN part is the start of LFN sequence */
+ dir[LDIR_Ord] = ord; /* Set the LFN order */
+}
+
+#endif
+#endif
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Create numbered name */
+/*-----------------------------------------------------------------------*/
+#if _USE_LFN
+void gen_numname (
+ BYTE *dst, /* Pointer to genartated SFN */
+ const BYTE *src, /* Pointer to source SFN to be modified */
+ const WCHAR *lfn, /* Pointer to LFN */
+ WORD num /* Sequense number */
+)
+{
+ char ns[8];
+ int i, j;
+
+
+ mem_cpy(dst, src, 11);
+
+ if (num > 5) { /* On many collisions, generate a hash number instead of sequencial number */
+ do num = (num >> 1) + (num << 15) + (WORD)*lfn++; while (*lfn);
+ }
+
+ /* itoa */
+ i = 7;
+ do {
+ ns[i--] = (num % 10) + '0';
+ num /= 10;
+ } while (num);
+ ns[i] = '~';
+
+ /* Append the number */
+ for (j = 0; j < i && dst[j] != ' '; j++) {
+ if (IsDBCS1(dst[j])) {
+ if (j == i - 1) break;
+ j++;
+ }
+ }
+ do {
+ dst[j++] = (i < 8) ? ns[i++] : ' ';
+ } while (j < 8);
+}
+#endif
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Calculate sum of an SFN */
+/*-----------------------------------------------------------------------*/
+#if _USE_LFN
+static
+BYTE sum_sfn (
+ const BYTE *dir /* Ptr to directory entry */
+)
+{
+ BYTE sum = 0;
+ int n = 11;
+
+ do sum = (sum >> 1) + (sum << 7) + *dir++; while (--n);
+ return sum;
+}
+#endif
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Directory handling - Find an object in the directory */
+/*-----------------------------------------------------------------------*/
+
+static
+FRESULT dir_find (
+ DIR *dj /* Pointer to the directory object linked to the file name */
+)
+{
+ FRESULT res;
+ BYTE c, *dir;
+#if _USE_LFN
+ BYTE a, ord, sum;
+#endif
+
+ res = dir_seek(dj, 0); /* Rewind directory object */
+ if (res != FR_OK) return res;
+
+#if _USE_LFN
+ ord = sum = 0xFF;
+#endif
+ do {
+ res = move_window(dj->fs, dj->sect);
+ if (res != FR_OK) break;
+ dir = dj->dir; /* Ptr to the directory entry of current index */
+ c = dir[DIR_Name];
+ if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */
+#if _USE_LFN /* LFN configuration */
+ a = dir[DIR_Attr] & AM_MASK;
+ if (c == 0xE5 || ((a & AM_VOL) && a != AM_LFN)) { /* An entry without valid data */
+ ord = 0xFF;
+ } else {
+ if (a == AM_LFN) { /* An LFN entry is found */
+ if (dj->lfn) {
+ if (c & 0x40) { /* Is it start of LFN sequence? */
+ sum = dir[LDIR_Chksum];
+ c &= 0xBF; ord = c; /* LFN start order */
+ dj->lfn_idx = dj->index;
+ }
+ /* Check validity of the LFN entry and compare it with given name */
+ ord = (c == ord && sum == dir[LDIR_Chksum] && cmp_lfn(dj->lfn, dir)) ? ord - 1 : 0xFF;
+ }
+ } else { /* An SFN entry is found */
+ if (!ord && sum == sum_sfn(dir)) break; /* LFN matched? */
+ ord = 0xFF; dj->lfn_idx = 0xFFFF; /* Reset LFN sequence */
+ if (!(dj->fn[NS] & NS_LOSS) && !mem_cmp(dir, dj->fn, 11)) break; /* SFN matched? */
+ }
+ }
+#else /* Non LFN configuration */
+ if (!(dir[DIR_Attr] & AM_VOL) && !mem_cmp(dir, dj->fn, 11)) /* Is it a valid entry? */
+ break;
+#endif
+ res = dir_next(dj, FALSE); /* Next entry */
+ } while (res == FR_OK);
+
+ return res;
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Read an object from the directory */
+/*-----------------------------------------------------------------------*/
+#if _FS_MINIMIZE <= 1
+static
+FRESULT dir_read (
+ DIR *dj /* Pointer to the directory object that pointing the entry to be read */
+)
+{
+ FRESULT res;
+ BYTE c, *dir;
+#if _USE_LFN
+ BYTE a, ord = 0xFF, sum = 0xFF;
+#endif
+
+ res = FR_NO_FILE;
+ while (dj->sect) {
+ res = move_window(dj->fs, dj->sect);
+ if (res != FR_OK) break;
+ dir = dj->dir; /* Ptr to the directory entry of current index */
+ c = dir[DIR_Name];
+ if (c == 0) { res = FR_NO_FILE; break; } /* Reached to end of table */
+#if _USE_LFN /* LFN configuration */
+ a = dir[DIR_Attr] & AM_MASK;
+ if (c == 0xE5 || (!_FS_RPATH && c == '.') || ((a & AM_VOL) && a != AM_LFN)) { /* An entry without valid data */
+ ord = 0xFF;
+ } else {
+ if (a == AM_LFN) { /* An LFN entry is found */
+ if (c & 0x40) { /* Is it start of LFN sequence? */
+ sum = dir[LDIR_Chksum];
+ c &= 0xBF; ord = c;
+ dj->lfn_idx = dj->index;
+ }
+ /* Check LFN validity and capture it */
+ ord = (c == ord && sum == dir[LDIR_Chksum] && pick_lfn(dj->lfn, dir)) ? ord - 1 : 0xFF;
+ } else { /* An SFN entry is found */
+ if (ord || sum != sum_sfn(dir)) /* Is there a valid LFN? */
+ dj->lfn_idx = 0xFFFF; /* It has no LFN. */
+ break;
+ }
+ }
+#else /* Non LFN configuration */
+ if (c != 0xE5 && (_FS_RPATH || c != '.') && !(dir[DIR_Attr] & AM_VOL)) /* Is it a valid entry? */
+ break;
+#endif
+ res = dir_next(dj, FALSE); /* Next entry */
+ if (res != FR_OK) break;
+ }
+
+ if (res != FR_OK) dj->sect = 0;
+
+ return res;
+}
+#endif
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Register an object to the directory */
+/*-----------------------------------------------------------------------*/
+#if !_FS_READONLY
+static
+FRESULT dir_register ( /* FR_OK:Successful, FR_DENIED:No free entry or too many SFN collision, FR_DISK_ERR:Disk error */
+ DIR *dj /* Target directory with object name to be created */
+)
+{
+ FRESULT res;
+ BYTE c, *dir;
+#if _USE_LFN /* LFN configuration */
+ WORD n, ne, is;
+ BYTE sn[12], *fn, sum;
+ WCHAR *lfn;
+
+
+ fn = dj->fn; lfn = dj->lfn;
+ mem_cpy(sn, fn, 12);
+
+ if (_FS_RPATH && (sn[NS] & NS_DOT)) return FR_INVALID_NAME; /* Cannot create dot entry */
+
+ if (sn[NS] & NS_LOSS) { /* When LFN is out of 8.3 format, generate a numbered name */
+ fn[NS] = 0; dj->lfn = NULL; /* Find only SFN */
+ for (n = 1; n < 100; n++) {
+ gen_numname(fn, sn, lfn, n); /* Generate a numbered name */
+ res = dir_find(dj); /* Check if the name collides with existing SFN */
+ if (res != FR_OK) break;
+ }
+ if (n == 100) return FR_DENIED; /* Abort if too many collisions */
+ if (res != FR_NO_FILE) return res; /* Abort if the result is other than 'not collided' */
+ fn[NS] = sn[NS]; dj->lfn = lfn;
+ }
+
+ if (sn[NS] & NS_LFN) { /* When LFN is to be created, reserve reserve an SFN + LFN entries. */
+ for (ne = 0; lfn[ne]; ne++) ;
+ ne = (ne + 25) / 13;
+ } else { /* Otherwise reserve only an SFN entry. */
+ ne = 1;
+ }
+
+ /* Reserve contiguous entries */
+ res = dir_seek(dj, 0);
+ if (res != FR_OK) return res;
+ n = is = 0;
+ do {
+ res = move_window(dj->fs, dj->sect);
+ if (res != FR_OK) break;
+ c = *dj->dir; /* Check the entry status */
+ if (c == 0xE5 || c == 0) { /* Is it a blank entry? */
+ if (n == 0) is = dj->index; /* First index of the contigulus entry */
+ if (++n == ne) break; /* A contiguous entry that requiered count is found */
+ } else {
+ n = 0; /* Not a blank entry. Restart to search */
+ }
+ res = dir_next(dj, TRUE); /* Next entry with table streach */
+ } while (res == FR_OK);
+
+ if (res == FR_OK && ne > 1) { /* Initialize LFN entry if needed */
+ res = dir_seek(dj, is);
+ if (res == FR_OK) {
+ sum = sum_sfn(dj->fn); /* Sum of the SFN tied to the LFN */
+ ne--;
+ do { /* Store LFN entries in bottom first */
+ res = move_window(dj->fs, dj->sect);
+ if (res != FR_OK) break;
+ fit_lfn(dj->lfn, dj->dir, (BYTE)ne, sum);
+ dj->fs->wflag = 1;
+ res = dir_next(dj, FALSE); /* Next entry */
+ } while (res == FR_OK && --ne);
+ }
+ }
+
+#else /* Non LFN configuration */
+ res = dir_seek(dj, 0);
+ if (res == FR_OK) {
+ do { /* Find a blank entry for the SFN */
+ res = move_window(dj->fs, dj->sect);
+ if (res != FR_OK) break;
+ c = *dj->dir;
+ if (c == 0xE5 || c == 0) break; /* Is it a blank entry? */
+ res = dir_next(dj, TRUE); /* Next entry with table streach */
+ } while (res == FR_OK);
+ }
+#endif
+
+ if (res == FR_OK) { /* Initialize the SFN entry */
+ res = move_window(dj->fs, dj->sect);
+ if (res == FR_OK) {
+ dir = dj->dir;
+ mem_set(dir, 0, 32); /* Clean the entry */
+ mem_cpy(dir, dj->fn, 11); /* Put SFN */
+ dir[DIR_NTres] = *(dj->fn+NS) & (NS_BODY | NS_EXT); /* Put NT flag */
+ dj->fs->wflag = 1;
+ }
+ }
+
+ return res;
+}
+#endif /* !_FS_READONLY */
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Remove an object from the directory */
+/*-----------------------------------------------------------------------*/
+#if !_FS_READONLY && !_FS_MINIMIZE
+static
+FRESULT dir_remove ( /* FR_OK: Successful, FR_DISK_ERR: A disk error */
+ DIR *dj /* Directory object pointing the entry to be removed */
+)
+{
+ FRESULT res;
+#if _USE_LFN /* LFN configuration */
+ WORD i;
+
+ i = dj->index; /* SFN index */
+ res = dir_seek(dj, (WORD)((dj->lfn_idx == 0xFFFF) ? i : dj->lfn_idx)); /* Goto the SFN or top of the LFN entries */
+ if (res == FR_OK) {
+ do {
+ res = move_window(dj->fs, dj->sect);
+ if (res != FR_OK) break;
+ *dj->dir = 0xE5; /* Mark the entry "deleted" */
+ dj->fs->wflag = 1;
+ if (dj->index >= i) break; /* When reached SFN, all entries of the object has been deleted. */
+ res = dir_next(dj, FALSE); /* Next entry */
+ } while (res == FR_OK);
+ if (res == FR_NO_FILE) res = FR_INT_ERR;
+ }
+
+#else /* Non LFN configuration */
+ res = dir_seek(dj, dj->index);
+ if (res == FR_OK) {
+ res = move_window(dj->fs, dj->sect);
+ if (res == FR_OK) {
+ *dj->dir = 0xE5; /* Mark the entry "deleted" */
+ dj->fs->wflag = 1;
+ }
+ }
+#endif
+
+ return res;
+}
+#endif /* !_FS_READONLY */
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Pick a segment and create the object name in directory form */
+/*-----------------------------------------------------------------------*/
+
+static
+FRESULT create_name (
+ DIR *dj, /* Pointer to the directory object */
+ const XCHAR **path /* Pointer to pointer to the segment in the path string */
+)
+{
+#ifdef _EXCVT
+ static const BYTE cvt[] = _EXCVT;
+#endif
+
+#if _USE_LFN /* LFN configuration */
+ BYTE b, cf;
+ WCHAR w, *lfn;
+ int i, ni, si, di;
+ const XCHAR *p;
+
+ /* Create LFN in Unicode */
+ si = di = 0;
+ p = *path;
+ lfn = dj->lfn;
+ for (;;) {
+ w = p[si++]; /* Get a character */
+ if (w < ' ' || w == '/' || w == '\\') break; /* Break on end of segment */
+ if (di >= _MAX_LFN) /* Reject too long name */
+ return FR_INVALID_NAME;
+#if !_LFN_UNICODE
+ w &= 0xFF;
+ if (IsDBCS1(w)) { /* If it is a DBC 1st byte */
+ b = p[si++]; /* Get 2nd byte */
+ if (!IsDBCS2(b)) /* Reject invalid code for DBC */
+ return FR_INVALID_NAME;
+ w = (w << 8) + b;
+ }
+ w = ff_convert(w, 1); /* Convert OEM to Unicode */
+ if (!w) return FR_INVALID_NAME; /* Reject invalid code */
+#endif
+ if (w < 0x80 && chk_chr("\"*:<>\?|\x7F", w)) /* Reject illegal chars for LFN */
+ return FR_INVALID_NAME;
+ lfn[di++] = w; /* Store the Unicode char */
+ }
+ *path = &p[si]; /* Rerurn pointer to the next segment */
+ cf = (w < ' ') ? NS_LAST : 0; /* Set last segment flag if end of path */
+#if _FS_RPATH
+ if ((di == 1 && lfn[di - 1] == '.') || /* Is this a dot entry? */
+ (di == 2 && lfn[di - 1] == '.' && lfn[di - 2] == '.')) {
+ lfn[di] = 0;
+ for (i = 0; i < 11; i++)
+ dj->fn[i] = (i < di) ? '.' : ' ';
+ dj->fn[i] = cf | NS_DOT; /* This is a dot entry */
+ return FR_OK;
+ }
+#endif
+ while (di) { /* Strip trailing spaces and dots */
+ w = lfn[di - 1];
+ if (w != ' ' && w != '.') break;
+ di--;
+ }
+ if (!di) return FR_INVALID_NAME; /* Reject null string */
+
+ lfn[di] = 0; /* LFN is created */
+
+ /* Create SFN in directory form */
+ mem_set(dj->fn, ' ', 11);
+ for (si = 0; lfn[si] == ' ' || lfn[si] == '.'; si++) ; /* Strip leading spaces and dots */
+ if (si) cf |= NS_LOSS | NS_LFN;
+ while (di && lfn[di - 1] != '.') di--; /* Find extension (di<=si: no extension) */
+
+ b = i = 0; ni = 8;
+ for (;;) {
+ w = lfn[si++]; /* Get an LFN char */
+ if (!w) break; /* Break on enf of the LFN */
+ if (w == ' ' || (w == '.' && si != di)) { /* Remove spaces and dots */
+ cf |= NS_LOSS | NS_LFN; continue;
+ }
+
+ if (i >= ni || si == di) { /* Extension or end of SFN */
+ if (ni == 11) { /* Long extension */
+ cf |= NS_LOSS | NS_LFN; break;
+ }
+ if (si != di) cf |= NS_LOSS | NS_LFN; /* Out of 8.3 format */
+ if (si > di) break; /* No extension */
+ si = di; i = 8; ni = 11; /* Enter extension section */
+ b <<= 2; continue;
+ }
+
+ if (w >= 0x80) { /* Non ASCII char */
+#ifdef _EXCVT
+ w = ff_convert(w, 0); /* Unicode -> OEM code */
+ if (w) w = cvt[w - 0x80]; /* Convert extended char to upper (SBCS) */
+#else
+ w = ff_convert(ff_wtoupper(w), 0); /* Upper converted Unicode -> OEM code */
+#endif
+ cf |= NS_LFN; /* Force create LFN entry */
+ }
+
+ if (_DF1S && w >= 0x100) { /* Double byte char */
+ if (i >= ni - 1) {
+ cf |= NS_LOSS | NS_LFN; i = ni; continue;
+ }
+ dj->fn[i++] = (BYTE)(w >> 8);
+ } else { /* Single byte char */
+ if (!w || chk_chr("+,;[=]", w)) { /* Replace illegal chars for SFN */
+ w = '_'; cf |= NS_LOSS | NS_LFN; /* Lossy conversion */
+ } else {
+ if (IsUpper(w)) { /* ASCII large capital */
+ b |= 2;
+ } else {
+ if (IsLower(w)) { /* ASCII small capital */
+ b |= 1; w -= 0x20;
+ }
+ }
+ }
+ }
+ dj->fn[i++] = (BYTE)w;
+ }
+
+ if (dj->fn[0] == 0xE5) dj->fn[0] = 0x05; /* If the first char collides with deleted mark, replace it with 0x05 */
+
+ if (ni == 8) b <<= 2;
+ if ((b & 0x0C) == 0x0C || (b & 0x03) == 0x03) /* Create LFN entry when there are composite capitals */
+ cf |= NS_LFN;
+ if (!(cf & NS_LFN)) { /* When LFN is in 8.3 format without extended char, NT flags are created */
+ if ((b & 0x03) == 0x01) cf |= NS_EXT; /* NT flag (Extension has only small capital) */
+ if ((b & 0x0C) == 0x04) cf |= NS_BODY; /* NT flag (Filename has only small capital) */
+ }
+
+ dj->fn[NS] = cf; /* SFN is created */
+
+ return FR_OK;
+
+
+#else /* Non-LFN configuration */
+ BYTE b, c, d, *sfn;
+ int ni, si, i;
+ const char *p;
+
+ /* Create file name in directory form */
+ sfn = dj->fn;
+ mem_set(sfn, ' ', 11);
+ si = i = b = 0; ni = 8;
+ p = *path;
+#if _FS_RPATH
+ if (p[si] == '.') { /* Is this a dot entry? */
+ for (;;) {
+ c = p[si++];
+ if (c != '.' || si >= 3) break;
+ sfn[i++] = c;
+ }
+ if (c != '/' && c != '\\' && c > ' ') return FR_INVALID_NAME;
+ *path = &p[si]; /* Rerurn pointer to the next segment */
+ sfn[NS] = (c <= ' ') ? NS_LAST | NS_DOT : NS_DOT; /* Set last segment flag if end of path */
+ return FR_OK;
+ }
+#endif
+ for (;;) {
+ c = p[si++];
+ if (c <= ' ' || c == '/' || c == '\\') break; /* Break on end of segment */
+ if (c == '.' || i >= ni) {
+ if (ni != 8 || c != '.') return FR_INVALID_NAME;
+ i = 8; ni = 11;
+ b <<= 2; continue;
+ }
+ if (c >= 0x80) { /* Extended char */
+#ifdef _EXCVT
+ c = cvt[c - 0x80]; /* Convert extend char (SBCS) */
+#else
+ b |= 3; /* Eliminate NT flag if ext char is exist */
+#if !_DF1S /* ASCII only cfg */
+ return FR_INVALID_NAME;
+#endif
+#endif
+ }
+ if (IsDBCS1(c)) { /* DBC 1st byte? */
+ d = p[si++]; /* Get 2nd byte */
+ if (!IsDBCS2(d) || i >= ni - 1) /* Reject invalid DBC */
+ return FR_INVALID_NAME;
+ sfn[i++] = c;
+ sfn[i++] = d;
+ } else { /* Single byte code */
+ if (chk_chr(" \"*+,[=]|\x7F", c)) /* Reject illegal chrs for SFN */
+ return FR_INVALID_NAME;
+ if (IsUpper(c)) { /* ASCII large capital? */
+ b |= 2;
+ } else {
+ if (IsLower(c)) { /* ASCII small capital? */
+ b |= 1; c -= 0x20;
+ }
+ }
+ sfn[i++] = c;
+ }
+ }
+ *path = &p[si]; /* Rerurn pointer to the next segment */
+ c = (c <= ' ') ? NS_LAST : 0; /* Set last segment flag if end of path */
+
+ if (!i) return FR_INVALID_NAME; /* Reject null string */
+ if (sfn[0] == 0xE5) sfn[0] = 0x05; /* When first char collides with 0xE5, replace it with 0x05 */
+
+ if (ni == 8) b <<= 2;
+ if ((b & 0x03) == 0x01) c |= NS_EXT; /* NT flag (Extension has only small capital) */
+ if ((b & 0x0C) == 0x04) c |= NS_BODY; /* NT flag (Filename has only small capital) */
+
+ sfn[NS] = c; /* Store NT flag, File name is created */
+
+ return FR_OK;
+#endif
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Get file information from directory entry */
+/*-----------------------------------------------------------------------*/
+#if _FS_MINIMIZE <= 1
+static
+void get_fileinfo ( /* No return code */
+ DIR *dj, /* Pointer to the directory object */
+ FILINFO *fno /* Pointer to the file information to be filled */
+)
+{
+ int i;
+ BYTE c, nt, *dir;
+ char *p;
+
+
+ p = fno->fname;
+ if (dj->sect) {
+ dir = dj->dir;
+ nt = dir[DIR_NTres]; /* NT flag */
+ for (i = 0; i < 8; i++) { /* Copy name body */
+ c = dir[i];
+ if (c == ' ') break;
+ if (c == 0x05) c = 0xE5;
+ if (_USE_LFN && (nt & NS_BODY) && IsUpper(c)) c += 0x20;
+ *p++ = c;
+ }
+ if (dir[8] != ' ') { /* Copy name extension */
+ *p++ = '.';
+ for (i = 8; i < 11; i++) {
+ c = dir[i];
+ if (c == ' ') break;
+ if (_USE_LFN && (nt & NS_EXT) && IsUpper(c)) c += 0x20;
+ *p++ = c;
+ }
+ }
+ fno->fattrib = dir[DIR_Attr]; /* Attribute */
+ fno->fsize = LD_DWORD(dir+DIR_FileSize); /* Size */
+ fno->fdate = LD_WORD(dir+DIR_WrtDate); /* Date */
+ fno->ftime = LD_WORD(dir+DIR_WrtTime); /* Time */
+ }
+ *p = 0;
+
+#if _USE_LFN
+ if (fno->lfname) {
+ XCHAR *tp = fno->lfname;
+ WCHAR w, *lfn;
+
+ i = 0;
+ if (dj->sect && dj->lfn_idx != 0xFFFF) {/* Get LFN if available */
+ lfn = dj->lfn;
+ while ((w = *lfn++) != 0) { /* Get an LFN char */
+#if !_LFN_UNICODE
+ w = ff_convert(w, 0); /* Unicode -> OEM conversion */
+ if (!w) { i = 0; break; } /* Could not convert, no LFN */
+ if (_DF1S && w >= 0x100) /* Put 1st byte if it is a DBC */
+ tp[i++] = (XCHAR)(w >> 8);
+#endif
+ if (i >= fno->lfsize - 1) { i = 0; break; } /* Buffer overrun, no LFN */
+ tp[i++] = (XCHAR)w;
+ }
+ }
+ tp[i] = 0; /* Terminator */
+ }
+#endif
+}
+#endif /* _FS_MINIMIZE <= 1 */
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Follow a file path */
+/*-----------------------------------------------------------------------*/
+
+static
+FRESULT follow_path ( /* FR_OK(0): successful, !=0: error code */
+ DIR *dj, /* Directory object to return last directory and found object */
+ const XCHAR *path /* Full-path string to find a file or directory */
+)
+{
+ FRESULT res;
+ BYTE *dir, last;
+
+
+ while (!_USE_LFN && *path == ' ') path++; /* Skip leading spaces */
+#if _FS_RPATH
+ if (*path == '/' || *path == '\\') { /* There is a heading separator */
+ path++; dj->sclust = 0; /* Strip it and start from the root dir */
+ } else { /* No heading saparator */
+ dj->sclust = dj->fs->cdir; /* Start from the current dir */
+ }
+#else
+ if (*path == '/' || *path == '\\') /* Strip heading separator if exist */
+ path++;
+ dj->sclust = 0; /* Start from the root dir */
+#endif
+
+ if ((UINT)*path < ' ') { /* Null path means the start directory itself */
+ res = dir_seek(dj, 0);
+ dj->dir = NULL;
+
+ } else { /* Follow path */
+ for (;;) {
+ res = create_name(dj, &path); /* Get a segment */
+ if (res != FR_OK) break;
+ res = dir_find(dj); /* Find it */
+ last = *(dj->fn+NS) & NS_LAST;
+ if (res != FR_OK) { /* Could not find the object */
+ if (res == FR_NO_FILE && !last)
+ res = FR_NO_PATH;
+ break;
+ }
+ if (last) break; /* Last segment match. Function completed. */
+ dir = dj->dir; /* There is next segment. Follow the sub directory */
+ if (!(dir[DIR_Attr] & AM_DIR)) { /* Cannot follow because it is a file */
+ res = FR_NO_PATH; break;
+ }
+ dj->sclust = ((DWORD)LD_WORD(dir+DIR_FstClusHI) << 16) | LD_WORD(dir+DIR_FstClusLO);
+ }
+ }
+
+ return res;
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Load boot record and check if it is an FAT boot record */
+/*-----------------------------------------------------------------------*/
+
+static
+BYTE check_fs ( /* 0:The FAT boot record, 1:Valid boot record but not an FAT, 2:Not a boot record, 3:Error */
+ FATFS *fs, /* File system object */
+ DWORD sect /* Sector# (lba) to check if it is an FAT boot record or not */
+)
+{
+ if (disk_read(fs->drive, fs->win, sect, 1) != RES_OK) /* Load boot record */
+ return 3;
+ if (LD_WORD(&fs->win[BS_55AA]) != 0xAA55) /* Check record signature (always placed at offset 510 even if the sector size is >512) */
+ return 2;
+
+ if ((LD_DWORD(&fs->win[BS_FilSysType]) & 0xFFFFFF) == 0x544146) /* Check "FAT" string */
+ return 0;
+ if ((LD_DWORD(&fs->win[BS_FilSysType32]) & 0xFFFFFF) == 0x544146)
+ return 0;
+
+ return 1;
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Make sure that the file system is valid */
+/*-----------------------------------------------------------------------*/
+
+
+FRESULT chk_mounted ( /* FR_OK(0): successful, !=0: any error occured */
+ const XCHAR **path, /* Pointer to pointer to the path name (drive number) */
+ FATFS **rfs, /* Pointer to pointer to the found file system object */
+ BYTE chk_wp /* !=0: Check media write protection for write access */
+)
+{
+ BYTE fmt, *tbl;
+ UINT vol;
+ DSTATUS stat;
+ DWORD bsect, fsize, tsect, mclst;
+ const XCHAR *p = *path;
+ FATFS *fs;
+
+ /* Get logical drive number from the path name */
+ vol = p[0] - '0'; /* Is there a drive number? */
+ if (vol <= 9 && p[1] == ':') { /* Found a drive number, get and strip it */
+ p += 2; *path = p; /* Return pointer to the path name */
+ } else { /* No drive number is given */
+#if _FS_RPATH
+ vol = Drive; /* Use current drive */
+#else
+ vol = 0; /* Use drive 0 */
+#endif
+ }
+
+ /* Check if the logical drive is valid or not */
+ if (vol >= _DRIVES) /* Is the drive number valid? */
+ return FR_INVALID_DRIVE;
+ *rfs = fs = FatFs[vol]; /* Returen pointer to the corresponding file system object */
+ if (!fs) return FR_NOT_ENABLED; /* Is the file system object available? */
+
+ ENTER_FF(fs); /* Lock file system */
+
+ if (fs->fs_type) { /* If the logical drive has been mounted */
+ stat = disk_status(fs->drive);
+ if (!(stat & STA_NOINIT)) { /* and the physical drive is kept initialized (has not been changed), */
+#if !_FS_READONLY
+ if (chk_wp && (stat & STA_PROTECT)) /* Check write protection if needed */
+ return FR_WRITE_PROTECTED;
+#endif
+ return FR_OK; /* The file system object is valid */
+ }
+ }
+
+ /* The logical drive must be mounted. Following code attempts to mount the volume */
+
+ fs->fs_type = 0; /* Clear the file system object */
+ fs->drive = (BYTE)LD2PD(vol); /* Bind the logical drive and a physical drive */
+ stat = disk_initialize(fs->drive); /* Initialize low level disk I/O layer */
+ if (stat & STA_NOINIT) /* Check if the drive is ready */
+ return FR_NOT_READY;
+#if _MAX_SS != 512 /* Get disk sector size if needed */
+ if (disk_ioctl(fs->drive, GET_SECTOR_SIZE, &SS(fs)) != RES_OK || SS(fs) > _MAX_SS)
+ return FR_NO_FILESYSTEM;
+#endif
+#if !_FS_READONLY
+ if (chk_wp && (stat & STA_PROTECT)) /* Check disk write protection if needed */
+ return FR_WRITE_PROTECTED;
+#endif
+ /* Search FAT partition on the drive */
+ fmt = check_fs(fs, bsect = 0); /* Check sector 0 as an SFD format */
+ if (fmt == 1) { /* Not an FAT boot record, it may be patitioned */
+ /* Check a partition listed in top of the partition table */
+ tbl = &fs->win[MBR_Table + LD2PT(vol) * 16]; /* Partition table */
+ if (tbl[4]) { /* Is the partition existing? */
+ bsect = LD_DWORD(&tbl[8]); /* Partition offset in LBA */
+ fmt = check_fs(fs, bsect); /* Check the partition */
+ }
+ }
+ if (fmt == 3) return FR_DISK_ERR;
+ if (fmt || LD_WORD(fs->win+BPB_BytsPerSec) != SS(fs)) /* No valid FAT patition is found */
+ return FR_NO_FILESYSTEM;
+
+ /* Initialize the file system object */
+ fsize = LD_WORD(fs->win+BPB_FATSz16); /* Number of sectors per FAT */
+ if (!fsize) fsize = LD_DWORD(fs->win+BPB_FATSz32);
+ fs->sects_fat = fsize;
+ fs->n_fats = fs->win[BPB_NumFATs]; /* Number of FAT copies */
+ fsize *= fs->n_fats; /* (Number of sectors in FAT area) */
+ fs->fatbase = bsect + LD_WORD(fs->win+BPB_RsvdSecCnt); /* FAT start sector (lba) */
+ fs->csize = fs->win[BPB_SecPerClus]; /* Number of sectors per cluster */
+ fs->n_rootdir = LD_WORD(fs->win+BPB_RootEntCnt); /* Nmuber of root directory entries */
+ tsect = LD_WORD(fs->win+BPB_TotSec16); /* Number of sectors on the volume */
+ if (!tsect) tsect = LD_DWORD(fs->win+BPB_TotSec32);
+ fs->max_clust = mclst = (tsect /* Last cluster# + 1 (Number of clusters + 2) */
+ - LD_WORD(fs->win+BPB_RsvdSecCnt) - fsize - fs->n_rootdir / (SS(fs)/32)
+ ) / fs->csize + 2;
+
+ fmt = FS_FAT12; /* Determine the FAT sub type */
+ if (mclst >= 0xFF7) fmt = FS_FAT16; /* Number of clusters >= 0xFF5 */
+ if (mclst >= 0xFFF7) fmt = FS_FAT32; /* Number of clusters >= 0xFFF5 */
+
+ if (fmt == FS_FAT32)
+ fs->dirbase = LD_DWORD(fs->win+BPB_RootClus); /* Root directory start cluster */
+ else
+ fs->dirbase = fs->fatbase + fsize; /* Root directory start sector (lba) */
+ fs->database = fs->fatbase + fsize + fs->n_rootdir / (SS(fs)/32); /* Data start sector (lba) */
+
+#if !_FS_READONLY
+ /* Initialize allocation information */
+ fs->free_clust = 0xFFFFFFFF;
+ fs->wflag = 0;
+ /* Get fsinfo if needed */
+ if (fmt == FS_FAT32) {
+ fs->fsi_flag = 0;
+ fs->fsi_sector = bsect + LD_WORD(fs->win+BPB_FSInfo);
+ if (disk_read(fs->drive, fs->win, fs->fsi_sector, 1) == RES_OK &&
+ LD_WORD(fs->win+BS_55AA) == 0xAA55 &&
+ LD_DWORD(fs->win+FSI_LeadSig) == 0x41615252 &&
+ LD_DWORD(fs->win+FSI_StrucSig) == 0x61417272) {
+ fs->last_clust = LD_DWORD(fs->win+FSI_Nxt_Free);
+ fs->free_clust = LD_DWORD(fs->win+FSI_Free_Count);
+ }
+ }
+#endif
+ fs->fs_type = fmt; /* FAT sub-type */
+ fs->winsect = 0; /* Invalidate sector cache */
+#if _FS_RPATH
+ fs->cdir = 0; /* Current directory (root dir) */
+#endif
+ fs->id = ++Fsid; /* File system mount ID */
+
+ return FR_OK;
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Check if the file/dir object is valid or not */
+/*-----------------------------------------------------------------------*/
+
+static
+FRESULT validate ( /* FR_OK(0): The object is valid, !=0: Invalid */
+ FATFS *fs, /* Pointer to the file system object */
+ WORD id /* Member id of the target object to be checked */
+)
+{
+ if (!fs || !fs->fs_type || fs->id != id)
+ return FR_INVALID_OBJECT;
+
+ ENTER_FF(fs); /* Lock file system */
+
+ if (disk_status(fs->drive) & STA_NOINIT)
+ return FR_NOT_READY;
+
+ return FR_OK;
+}
+
+
+
+
+/*--------------------------------------------------------------------------
+
+ Public Functions
+
+--------------------------------------------------------------------------*/
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Mount/Unmount a Locical Drive */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_mount (
+ BYTE vol, /* Logical drive number to be mounted/unmounted */
+ FATFS *fs /* Pointer to new file system object (NULL for unmount)*/
+)
+{
+ FATFS *rfs;
+
+
+ if (vol >= _DRIVES) /* Check if the drive number is valid */
+ return FR_INVALID_DRIVE;
+ rfs = FatFs[vol]; /* Get current fs object */
+
+ if (rfs) {
+#if _FS_REENTRANT /* Discard sync object of the current volume */
+ if (!ff_del_syncobj(rfs->sobj)) return FR_INT_ERR;
+#endif
+ rfs->fs_type = 0; /* Clear old fs object */
+ }
+
+ if (fs) {
+ fs->fs_type = 0; /* Clear new fs object */
+#if _FS_REENTRANT /* Create sync object for the new volume */
+ if (!ff_cre_syncobj(vol, &fs->sobj)) return FR_INT_ERR;
+#endif
+ }
+ FatFs[vol] = fs; /* Register new fs object */
+
+ return FR_OK;
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Open or Create a File */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_open (
+ FIL *fp, /* Pointer to the blank file object */
+ const XCHAR *path, /* Pointer to the file name */
+ BYTE mode /* Access mode and file open mode flags */
+)
+{
+ FRESULT res;
+ DIR dj;
+ NAMEBUF(sfn, lfn);
+ BYTE *dir;
+
+
+ fp->fs = NULL; /* Clear file object */
+#if !_FS_READONLY
+ mode &= (FA_READ | FA_WRITE | FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW);
+ res = chk_mounted(&path, &dj.fs, (BYTE)(mode & (FA_WRITE | FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW)));
+#else
+ mode &= FA_READ;
+ res = chk_mounted(&path, &dj.fs, 0);
+#endif
+ if (res != FR_OK) LEAVE_FF(dj.fs, res);
+ INITBUF(dj, sfn, lfn);
+ res = follow_path(&dj, path); /* Follow the file path */
+
+#if !_FS_READONLY
+ /* Create or Open a file */
+ if (mode & (FA_CREATE_ALWAYS | FA_OPEN_ALWAYS | FA_CREATE_NEW)) {
+ DWORD ps, cl;
+
+ if (res != FR_OK) { /* No file, create new */
+ if (res == FR_NO_FILE) /* There is no file to open, create a new entry */
+ res = dir_register(&dj);
+ if (res != FR_OK) LEAVE_FF(dj.fs, res);
+ mode |= FA_CREATE_ALWAYS;
+ dir = dj.dir; /* Created entry (SFN entry) */
+ }
+ else { /* Any object is already existing */
+ if (mode & FA_CREATE_NEW) /* Cannot create new */
+ LEAVE_FF(dj.fs, FR_EXIST);
+ dir = dj.dir;
+ if (!dir || (dir[DIR_Attr] & (AM_RDO | AM_DIR))) /* Cannot overwrite it (R/O or DIR) */
+ LEAVE_FF(dj.fs, FR_DENIED);
+ if (mode & FA_CREATE_ALWAYS) { /* Resize it to zero on over write mode */
+ cl = ((DWORD)LD_WORD(dir+DIR_FstClusHI) << 16) | LD_WORD(dir+DIR_FstClusLO); /* Get start cluster */
+ ST_WORD(dir+DIR_FstClusHI, 0); /* cluster = 0 */
+ ST_WORD(dir+DIR_FstClusLO, 0);
+ ST_DWORD(dir+DIR_FileSize, 0); /* size = 0 */
+ dj.fs->wflag = 1;
+ ps = dj.fs->winsect; /* Remove the cluster chain */
+ if (cl) {
+ res = remove_chain(dj.fs, cl);
+ if (res) LEAVE_FF(dj.fs, res);
+ dj.fs->last_clust = cl - 1; /* Reuse the cluster hole */
+ }
+ res = move_window(dj.fs, ps);
+ if (res != FR_OK) LEAVE_FF(dj.fs, res);
+ }
+ }
+ if (mode & FA_CREATE_ALWAYS) {
+ dir[DIR_Attr] = 0; /* Reset attribute */
+ ps = get_fattime();
+ ST_DWORD(dir+DIR_CrtTime, ps); /* Created time */
+ dj.fs->wflag = 1;
+ mode |= FA__WRITTEN; /* Set file changed flag */
+ }
+ }
+ /* Open an existing file */
+ else {
+#endif /* !_FS_READONLY */
+ if (res != FR_OK) LEAVE_FF(dj.fs, res); /* Follow failed */
+ dir = dj.dir;
+ if (!dir || (dir[DIR_Attr] & AM_DIR)) /* It is a directory */
+ LEAVE_FF(dj.fs, FR_NO_FILE);
+#if !_FS_READONLY
+ if ((mode & FA_WRITE) && (dir[DIR_Attr] & AM_RDO)) /* R/O violation */
+ LEAVE_FF(dj.fs, FR_DENIED);
+ }
+ fp->dir_sect = dj.fs->winsect; /* Pointer to the directory entry */
+ fp->dir_ptr = dj.dir;
+#endif
+ fp->flag = mode; /* File access mode */
+ fp->org_clust = /* File start cluster */
+ ((DWORD)LD_WORD(dir+DIR_FstClusHI) << 16) | LD_WORD(dir+DIR_FstClusLO);
+ fp->fsize = LD_DWORD(dir+DIR_FileSize); /* File size */
+ fp->fptr = 0; fp->csect = 255; /* File pointer */
+ fp->dsect = 0;
+ fp->fs = dj.fs; fp->id = dj.fs->id; /* Owner file system object of the file */
+
+ LEAVE_FF(dj.fs, FR_OK);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Read File */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_read (
+ FIL *fp, /* Pointer to the file object */
+ void *buff, /* Pointer to data buffer */
+ UINT btr, /* Number of bytes to read */
+ UINT *br /* Pointer to number of bytes read */
+)
+{
+ FRESULT res;
+ DWORD clst, sect, remain;
+ UINT rcnt, cc;
+ BYTE *rbuff = buff;
+
+
+ *br = 0; /* Initialize bytes read */
+
+ res = validate(fp->fs, fp->id); /* Check validity of the object */
+ if (res != FR_OK) LEAVE_FF(fp->fs, res);
+ if (fp->flag & FA__ERROR) /* Check abort flag */
+ LEAVE_FF(fp->fs, FR_INT_ERR);
+ if (!(fp->flag & FA_READ)) /* Check access mode */
+ LEAVE_FF(fp->fs, FR_DENIED);
+ remain = fp->fsize - fp->fptr;
+ if (btr > remain) btr = (UINT)remain; /* Truncate btr by remaining bytes */
+
+ for ( ; btr; /* Repeat until all data transferred */
+ rbuff += rcnt, fp->fptr += rcnt, *br += rcnt, btr -= rcnt) {
+ if ((fp->fptr % SS(fp->fs)) == 0) { /* On the sector boundary? */
+ if (fp->csect >= fp->fs->csize) { /* On the cluster boundary? */
+ clst = (fp->fptr == 0) ? /* On the top of the file? */
+ fp->org_clust : get_fat(fp->fs, fp->curr_clust);
+ if (clst <= 1) ABORT(fp->fs, FR_INT_ERR);
+ if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
+ fp->curr_clust = clst; /* Update current cluster */
+ fp->csect = 0; /* Reset sector offset in the cluster */
+ }
+ sect = clust2sect(fp->fs, fp->curr_clust); /* Get current sector */
+ if (!sect) ABORT(fp->fs, FR_INT_ERR);
+ sect += fp->csect;
+ cc = btr / SS(fp->fs); /* When remaining bytes >= sector size, */
+ if (cc) { /* Read maximum contiguous sectors directly */
+ if (fp->csect + cc > fp->fs->csize) /* Clip at cluster boundary */
+ cc = fp->fs->csize - fp->csect;
+ if (disk_read(fp->fs->drive, rbuff, sect, (BYTE)cc) != RES_OK)
+ ABORT(fp->fs, FR_DISK_ERR);
+#if !_FS_READONLY && _FS_MINIMIZE <= 2
+#if _FS_TINY
+ if (fp->fs->wflag && fp->fs->winsect - sect < cc) /* Replace one of the read sectors with cached data if it contains a dirty sector */
+ mem_cpy(rbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), fp->fs->win, SS(fp->fs));
+#else
+ if ((fp->flag & FA__DIRTY) && fp->dsect - sect < cc) /* Replace one of the read sectors with cached data if it contains a dirty sector */
+ mem_cpy(rbuff + ((fp->dsect - sect) * SS(fp->fs)), fp->buf, SS(fp->fs));
+#endif
+#endif
+ fp->csect += (BYTE)cc; /* Next sector address in the cluster */
+ rcnt = SS(fp->fs) * cc; /* Number of bytes transferred */
+ continue;
+ }
+#if !_FS_TINY
+#if !_FS_READONLY
+ if (fp->flag & FA__DIRTY) { /* Write sector I/O buffer if needed */
+ if (disk_write(fp->fs->drive, fp->buf, fp->dsect, 1) != RES_OK)
+ ABORT(fp->fs, FR_DISK_ERR);
+ fp->flag &= ~FA__DIRTY;
+ }
+#endif
+ if (fp->dsect != sect) { /* Fill sector buffer with file data */
+ if (disk_read(fp->fs->drive, fp->buf, sect, 1) != RES_OK)
+ ABORT(fp->fs, FR_DISK_ERR);
+ }
+#endif
+ fp->dsect = sect;
+ fp->csect++; /* Next sector address in the cluster */
+ }
+ rcnt = SS(fp->fs) - (fp->fptr % SS(fp->fs)); /* Get partial sector data from sector buffer */
+ if (rcnt > btr) rcnt = btr;
+#if _FS_TINY
+ if (move_window(fp->fs, fp->dsect)) /* Move sector window */
+ ABORT(fp->fs, FR_DISK_ERR);
+ mem_cpy(rbuff, &fp->fs->win[fp->fptr % SS(fp->fs)], rcnt); /* Pick partial sector */
+#else
+ mem_cpy(rbuff, &fp->buf[fp->fptr % SS(fp->fs)], rcnt); /* Pick partial sector */
+#endif
+ }
+
+ LEAVE_FF(fp->fs, FR_OK);
+}
+
+
+
+
+#if !_FS_READONLY
+/*-----------------------------------------------------------------------*/
+/* Write File */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_write (
+ FIL *fp, /* Pointer to the file object */
+ const void *buff, /* Pointer to the data to be written */
+ UINT btw, /* Number of bytes to write */
+ UINT *bw /* Pointer to number of bytes written */
+)
+{
+ FRESULT res;
+ DWORD clst, sect;
+ UINT wcnt, cc;
+ const BYTE *wbuff = buff;
+
+
+ *bw = 0; /* Initialize bytes written */
+
+ res = validate(fp->fs, fp->id); /* Check validity of the object */
+ if (res != FR_OK) LEAVE_FF(fp->fs, res);
+ if (fp->flag & FA__ERROR) /* Check abort flag */
+ LEAVE_FF(fp->fs, FR_INT_ERR);
+ if (!(fp->flag & FA_WRITE)) /* Check access mode */
+ LEAVE_FF(fp->fs, FR_DENIED);
+ if (fp->fsize + btw < fp->fsize) btw = 0; /* File size cannot reach 4GB */
+
+ for ( ; btw; /* Repeat until all data transferred */
+ wbuff += wcnt, fp->fptr += wcnt, *bw += wcnt, btw -= wcnt) {
+ if ((fp->fptr % SS(fp->fs)) == 0) { /* On the sector boundary? */
+ if (fp->csect >= fp->fs->csize) { /* On the cluster boundary? */
+ if (fp->fptr == 0) { /* On the top of the file? */
+ clst = fp->org_clust; /* Follow from the origin */
+ if (clst == 0) /* When there is no cluster chain, */
+ fp->org_clust = clst = create_chain(fp->fs, 0); /* Create a new cluster chain */
+ } else { /* Middle or end of the file */
+ clst = create_chain(fp->fs, fp->curr_clust); /* Follow or streach cluster chain */
+ }
+ if (clst == 0) break; /* Could not allocate a new cluster (disk full) */
+ if (clst == 1) ABORT(fp->fs, FR_INT_ERR);
+ if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
+ fp->curr_clust = clst; /* Update current cluster */
+ fp->csect = 0; /* Reset sector address in the cluster */
+ }
+#if _FS_TINY
+ if (fp->fs->winsect == fp->dsect && move_window(fp->fs, 0)) /* Write back data buffer prior to following direct transfer */
+ ABORT(fp->fs, FR_DISK_ERR);
+#else
+ if (fp->flag & FA__DIRTY) { /* Write back data buffer prior to following direct transfer */
+ if (disk_write(fp->fs->drive, fp->buf, fp->dsect, 1) != RES_OK)
+ ABORT(fp->fs, FR_DISK_ERR);
+ fp->flag &= ~FA__DIRTY;
+ }
+#endif
+ sect = clust2sect(fp->fs, fp->curr_clust); /* Get current sector */
+ if (!sect) ABORT(fp->fs, FR_INT_ERR);
+ sect += fp->csect;
+ cc = btw / SS(fp->fs); /* When remaining bytes >= sector size, */
+ if (cc) { /* Write maximum contiguous sectors directly */
+ if (fp->csect + cc > fp->fs->csize) /* Clip at cluster boundary */
+ cc = fp->fs->csize - fp->csect;
+ if (disk_write(fp->fs->drive, wbuff, sect, (BYTE)cc) != RES_OK)
+ ABORT(fp->fs, FR_DISK_ERR);
+#if _FS_TINY
+ if (fp->fs->winsect - sect < cc) { /* Refill sector cache if it gets dirty by the direct write */
+ mem_cpy(fp->fs->win, wbuff + ((fp->fs->winsect - sect) * SS(fp->fs)), SS(fp->fs));
+ fp->fs->wflag = 0;
+ }
+#else
+ if (fp->dsect - sect < cc) { /* Refill sector cache if it gets dirty by the direct write */
+ mem_cpy(fp->buf, wbuff + ((fp->dsect - sect) * SS(fp->fs)), SS(fp->fs));
+ fp->flag &= ~FA__DIRTY;
+ }
+#endif
+ fp->csect += (BYTE)cc; /* Next sector address in the cluster */
+ wcnt = SS(fp->fs) * cc; /* Number of bytes transferred */
+ continue;
+ }
+#if _FS_TINY
+ if (fp->fptr >= fp->fsize) { /* Avoid silly buffer filling at growing edge */
+ if (move_window(fp->fs, 0)) ABORT(fp->fs, FR_DISK_ERR);
+ fp->fs->winsect = sect;
+ }
+#else
+ if (fp->dsect != sect) { /* Fill sector buffer with file data */
+ if (fp->fptr < fp->fsize &&
+ disk_read(fp->fs->drive, fp->buf, sect, 1) != RES_OK)
+ ABORT(fp->fs, FR_DISK_ERR);
+ }
+#endif
+ fp->dsect = sect;
+ fp->csect++; /* Next sector address in the cluster */
+ }
+ wcnt = SS(fp->fs) - (fp->fptr % SS(fp->fs)); /* Put partial sector into file I/O buffer */
+ if (wcnt > btw) wcnt = btw;
+#if _FS_TINY
+ if (move_window(fp->fs, fp->dsect)) /* Move sector window */
+ ABORT(fp->fs, FR_DISK_ERR);
+ mem_cpy(&fp->fs->win[fp->fptr % SS(fp->fs)], wbuff, wcnt); /* Fit partial sector */
+ fp->fs->wflag = 1;
+#else
+ mem_cpy(&fp->buf[fp->fptr % SS(fp->fs)], wbuff, wcnt); /* Fit partial sector */
+ fp->flag |= FA__DIRTY;
+#endif
+ }
+
+ if (fp->fptr > fp->fsize) fp->fsize = fp->fptr; /* Update file size if needed */
+ fp->flag |= FA__WRITTEN; /* Set file changed flag */
+
+ LEAVE_FF(fp->fs, FR_OK);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Synchronize the File Object */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_sync (
+ FIL *fp /* Pointer to the file object */
+)
+{
+ FRESULT res;
+ DWORD tim;
+ BYTE *dir;
+
+
+ res = validate(fp->fs, fp->id); /* Check validity of the object */
+ if (res == FR_OK) {
+ if (fp->flag & FA__WRITTEN) { /* Has the file been written? */
+#if !_FS_TINY /* Write-back dirty buffer */
+ if (fp->flag & FA__DIRTY) {
+ if (disk_write(fp->fs->drive, fp->buf, fp->dsect, 1) != RES_OK)
+ LEAVE_FF(fp->fs, FR_DISK_ERR);
+ fp->flag &= ~FA__DIRTY;
+ }
+#endif
+ /* Update the directory entry */
+ res = move_window(fp->fs, fp->dir_sect);
+ if (res == FR_OK) {
+ dir = fp->dir_ptr;
+ dir[DIR_Attr] |= AM_ARC; /* Set archive bit */
+ ST_DWORD(dir+DIR_FileSize, fp->fsize); /* Update file size */
+ ST_WORD(dir+DIR_FstClusLO, fp->org_clust); /* Update start cluster */
+ ST_WORD(dir+DIR_FstClusHI, fp->org_clust >> 16);
+ tim = get_fattime(); /* Updated time */
+ ST_DWORD(dir+DIR_WrtTime, tim);
+ fp->flag &= ~FA__WRITTEN;
+ fp->fs->wflag = 1;
+ res = sync(fp->fs);
+ }
+ }
+ }
+
+ LEAVE_FF(fp->fs, res);
+}
+
+#endif /* !_FS_READONLY */
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Close File */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_close (
+ FIL *fp /* Pointer to the file object to be closed */
+)
+{
+ FRESULT res;
+
+
+#if _FS_READONLY
+ res = validate(fp->fs, fp->id);
+ if (res == FR_OK) fp->fs = NULL;
+ LEAVE_FF(fp->fs, res);
+#else
+ res = f_sync(fp);
+ if (res == FR_OK) fp->fs = NULL;
+ return res;
+#endif
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Change Current Drive/Directory */
+/*-----------------------------------------------------------------------*/
+
+#if _FS_RPATH
+
+FRESULT f_chdrive (
+ BYTE drv /* Drive number */
+)
+{
+ if (drv >= _DRIVES) return FR_INVALID_DRIVE;
+
+ Drive = drv;
+
+ return FR_OK;
+}
+
+
+
+
+FRESULT f_chdir (
+ const XCHAR *path /* Pointer to the directory path */
+)
+{
+ FRESULT res;
+ DIR dj;
+ NAMEBUF(sfn, lfn);
+ BYTE *dir;
+
+
+ res = chk_mounted(&path, &dj.fs, 0);
+ if (res == FR_OK) {
+ INITBUF(dj, sfn, lfn);
+ res = follow_path(&dj, path); /* Follow the file path */
+ if (res == FR_OK) { /* Follow completed */
+ dir = dj.dir; /* Pointer to the entry */
+ if (!dir) {
+ dj.fs->cdir = 0; /* No entry (root dir) */
+ } else {
+ if (dir[DIR_Attr] & AM_DIR) /* Reached to the dir */
+ dj.fs->cdir = ((DWORD)LD_WORD(dir+DIR_FstClusHI) << 16) | LD_WORD(dir+DIR_FstClusLO);
+ else
+ res = FR_NO_PATH; /* Could not reach the dir (it is a file) */
+ }
+ }
+ if (res == FR_NO_FILE) res = FR_NO_PATH;
+ }
+
+ LEAVE_FF(dj.fs, res);
+}
+
+#endif
+
+
+
+#if _FS_MINIMIZE <= 2
+/*-----------------------------------------------------------------------*/
+/* Seek File R/W Pointer */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_lseek (
+ FIL *fp, /* Pointer to the file object */
+ DWORD ofs /* File pointer from top of file */
+)
+{
+ FRESULT res;
+ DWORD clst, bcs, nsect, ifptr;
+
+
+ res = validate(fp->fs, fp->id); /* Check validity of the object */
+ if (res != FR_OK) LEAVE_FF(fp->fs, res);
+ if (fp->flag & FA__ERROR) /* Check abort flag */
+ LEAVE_FF(fp->fs, FR_INT_ERR);
+ if (ofs > fp->fsize /* In read-only mode, clip offset with the file size */
+#if !_FS_READONLY
+ && !(fp->flag & FA_WRITE)
+#endif
+ ) ofs = fp->fsize;
+
+ ifptr = fp->fptr;
+ fp->fptr = nsect = 0; fp->csect = 255;
+ if (ofs > 0) {
+ bcs = (DWORD)fp->fs->csize * SS(fp->fs); /* Cluster size (byte) */
+ if (ifptr > 0 &&
+ (ofs - 1) / bcs >= (ifptr - 1) / bcs) { /* When seek to same or following cluster, */
+ fp->fptr = (ifptr - 1) & ~(bcs - 1); /* start from the current cluster */
+ ofs -= fp->fptr;
+ clst = fp->curr_clust;
+ } else { /* When seek to back cluster, */
+ clst = fp->org_clust; /* start from the first cluster */
+#if !_FS_READONLY
+ if (clst == 0) { /* If no cluster chain, create a new chain */
+ clst = create_chain(fp->fs, 0);
+ if (clst == 1) ABORT(fp->fs, FR_INT_ERR);
+ if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
+ fp->org_clust = clst;
+ }
+#endif
+ fp->curr_clust = clst;
+ }
+ if (clst != 0) {
+ while (ofs > bcs) { /* Cluster following loop */
+#if !_FS_READONLY
+ if (fp->flag & FA_WRITE) { /* Check if in write mode or not */
+ clst = create_chain(fp->fs, clst); /* Force streached if in write mode */
+ if (clst == 0) { /* When disk gets full, clip file size */
+ ofs = bcs; break;
+ }
+ } else
+#endif
+ clst = get_fat(fp->fs, clst); /* Follow cluster chain if not in write mode */
+ if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
+ if (clst <= 1 || clst >= fp->fs->max_clust) ABORT(fp->fs, FR_INT_ERR);
+ fp->curr_clust = clst;
+ fp->fptr += bcs;
+ ofs -= bcs;
+ }
+ fp->fptr += ofs;
+ fp->csect = (BYTE)(ofs / SS(fp->fs)); /* Sector offset in the cluster */
+ if (ofs % SS(fp->fs)) {
+ nsect = clust2sect(fp->fs, clst); /* Current sector */
+ if (!nsect) ABORT(fp->fs, FR_INT_ERR);
+ nsect += fp->csect;
+ fp->csect++;
+ }
+ }
+ }
+ if (fp->fptr % SS(fp->fs) && nsect != fp->dsect) {
+#if !_FS_TINY
+#if !_FS_READONLY
+ if (fp->flag & FA__DIRTY) { /* Write-back dirty buffer if needed */
+ if (disk_write(fp->fs->drive, fp->buf, fp->dsect, 1) != RES_OK)
+ ABORT(fp->fs, FR_DISK_ERR);
+ fp->flag &= ~FA__DIRTY;
+ }
+#endif
+ if (disk_read(fp->fs->drive, fp->buf, nsect, 1) != RES_OK)
+ ABORT(fp->fs, FR_DISK_ERR);
+#endif
+ fp->dsect = nsect;
+ }
+#if !_FS_READONLY
+ if (fp->fptr > fp->fsize) { /* Set changed flag if the file size is extended */
+ fp->fsize = fp->fptr;
+ fp->flag |= FA__WRITTEN;
+ }
+#endif
+
+ LEAVE_FF(fp->fs, res);
+}
+
+
+
+
+#if _FS_MINIMIZE <= 1
+/*-----------------------------------------------------------------------*/
+/* Create a Directroy Object */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_opendir (
+ DIR *dj, /* Pointer to directory object to create */
+ const XCHAR *path /* Pointer to the directory path */
+)
+{
+ FRESULT res;
+ NAMEBUF(sfn, lfn);
+ BYTE *dir;
+
+
+ res = chk_mounted(&path, &dj->fs, 0);
+ if (res == FR_OK) {
+ INITBUF((*dj), sfn, lfn);
+ res = follow_path(dj, path); /* Follow the path to the directory */
+ if (res == FR_OK) { /* Follow completed */
+ dir = dj->dir;
+ if (dir) { /* It is not the root dir */
+ if (dir[DIR_Attr] & AM_DIR) { /* The object is a directory */
+ dj->sclust = ((DWORD)LD_WORD(dir+DIR_FstClusHI) << 16) | LD_WORD(dir+DIR_FstClusLO);
+ } else { /* The object is not a directory */
+ res = FR_NO_PATH;
+ }
+ }
+ if (res == FR_OK) {
+ dj->id = dj->fs->id;
+ res = dir_seek(dj, 0); /* Rewind dir */
+ }
+ }
+ if (res == FR_NO_FILE) res = FR_NO_PATH;
+ }
+
+ LEAVE_FF(dj->fs, res);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Read Directory Entry in Sequense */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_readdir (
+ DIR *dj, /* Pointer to the open directory object */
+ FILINFO *fno /* Pointer to file information to return */
+)
+{
+ FRESULT res;
+ NAMEBUF(sfn, lfn);
+
+
+ res = validate(dj->fs, dj->id); /* Check validity of the object */
+ if (res == FR_OK) {
+ INITBUF((*dj), sfn, lfn);
+ if (!fno) {
+ res = dir_seek(dj, 0);
+ } else {
+ res = dir_read(dj);
+ if (res == FR_NO_FILE) {
+ dj->sect = 0;
+ res = FR_OK;
+ }
+ if (res == FR_OK) { /* A valid entry is found */
+ get_fileinfo(dj, fno); /* Get the object information */
+ res = dir_next(dj, FALSE); /* Increment index for next */
+ if (res == FR_NO_FILE) {
+ dj->sect = 0;
+ res = FR_OK;
+ }
+ }
+ }
+ }
+
+ LEAVE_FF(dj->fs, res);
+}
+
+
+
+#if _FS_MINIMIZE == 0
+/*-----------------------------------------------------------------------*/
+/* Get File Status */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_stat (
+ const XCHAR *path, /* Pointer to the file path */
+ FILINFO *fno /* Pointer to file information to return */
+)
+{
+ FRESULT res;
+ DIR dj;
+ NAMEBUF(sfn, lfn);
+
+
+ res = chk_mounted(&path, &dj.fs, 0);
+ if (res == FR_OK) {
+ INITBUF(dj, sfn, lfn);
+ res = follow_path(&dj, path); /* Follow the file path */
+ if (res == FR_OK) { /* Follwo completed */
+ if (dj.dir) /* Found an object */
+ get_fileinfo(&dj, fno);
+ else /* It is root dir */
+ res = FR_INVALID_NAME;
+ }
+ }
+
+ LEAVE_FF(dj.fs, res);
+}
+
+
+
+#if !_FS_READONLY
+/*-----------------------------------------------------------------------*/
+/* Get Number of Free Clusters */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_getfree (
+ const XCHAR *path, /* Pointer to the logical drive number (root dir) */
+ DWORD *nclst, /* Pointer to the variable to return number of free clusters */
+ FATFS **fatfs /* Pointer to pointer to corresponding file system object to return */
+)
+{
+ FRESULT res;
+ DWORD n, clst, sect, stat;
+ UINT i;
+ BYTE fat, *p;
+
+
+ /* Get drive number */
+ res = chk_mounted(&path, fatfs, 0);
+ if (res != FR_OK) LEAVE_FF(*fatfs, res);
+
+ /* If number of free cluster is valid, return it without cluster scan. */
+ if ((*fatfs)->free_clust <= (*fatfs)->max_clust - 2) {
+ *nclst = (*fatfs)->free_clust;
+ LEAVE_FF(*fatfs, FR_OK);
+ }
+
+ /* Get number of free clusters */
+ fat = (*fatfs)->fs_type;
+ n = 0;
+ if (fat == FS_FAT12) {
+ clst = 2;
+ do {
+ stat = get_fat(*fatfs, clst);
+ if (stat == 0xFFFFFFFF) LEAVE_FF(*fatfs, FR_DISK_ERR);
+ if (stat == 1) LEAVE_FF(*fatfs, FR_INT_ERR);
+ if (stat == 0) n++;
+ } while (++clst < (*fatfs)->max_clust);
+ } else {
+ clst = (*fatfs)->max_clust;
+ sect = (*fatfs)->fatbase;
+ i = 0; p = 0;
+ do {
+ if (!i) {
+ res = move_window(*fatfs, sect++);
+ if (res != FR_OK)
+ LEAVE_FF(*fatfs, res);
+ p = (*fatfs)->win;
+ i = SS(*fatfs);
+ }
+ if (fat == FS_FAT16) {
+ if (LD_WORD(p) == 0) n++;
+ p += 2; i -= 2;
+ } else {
+ if ((LD_DWORD(p) & 0x0FFFFFFF) == 0) n++;
+ p += 4; i -= 4;
+ }
+ } while (--clst);
+ }
+ (*fatfs)->free_clust = n;
+ if (fat == FS_FAT32) (*fatfs)->fsi_flag = 1;
+ *nclst = n;
+
+ LEAVE_FF(*fatfs, FR_OK);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Truncate File */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_truncate (
+ FIL *fp /* Pointer to the file object */
+)
+{
+ FRESULT res;
+ DWORD ncl;
+
+
+ res = validate(fp->fs, fp->id); /* Check validity of the object */
+ if (res != FR_OK) LEAVE_FF(fp->fs, res);
+ if (fp->flag & FA__ERROR) /* Check abort flag */
+ LEAVE_FF(fp->fs, FR_INT_ERR);
+ if (!(fp->flag & FA_WRITE)) /* Check access mode */
+ LEAVE_FF(fp->fs, FR_DENIED);
+
+ if (fp->fsize > fp->fptr) {
+ fp->fsize = fp->fptr; /* Set file size to current R/W point */
+ fp->flag |= FA__WRITTEN;
+ if (fp->fptr == 0) { /* When set file size to zero, remove entire cluster chain */
+ res = remove_chain(fp->fs, fp->org_clust);
+ fp->org_clust = 0;
+ } else { /* When truncate a part of the file, remove remaining clusters */
+ ncl = get_fat(fp->fs, fp->curr_clust);
+ res = FR_OK;
+ if (ncl == 0xFFFFFFFF) res = FR_DISK_ERR;
+ if (ncl == 1) res = FR_INT_ERR;
+ if (res == FR_OK && ncl < fp->fs->max_clust) {
+ res = put_fat(fp->fs, fp->curr_clust, 0x0FFFFFFF);
+ if (res == FR_OK) res = remove_chain(fp->fs, ncl);
+ }
+ }
+ }
+ if (res != FR_OK) fp->flag |= FA__ERROR;
+
+ LEAVE_FF(fp->fs, res);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Delete a File or Directory */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_unlink (
+ const XCHAR *path /* Pointer to the file or directory path */
+)
+{
+ FRESULT res;
+ DIR dj, sdj;
+ NAMEBUF(sfn, lfn);
+ BYTE *dir;
+ DWORD dclst;
+
+
+ res = chk_mounted(&path, &dj.fs, 1);
+ if (res != FR_OK) LEAVE_FF(dj.fs, res);
+
+ INITBUF(dj, sfn, lfn);
+ res = follow_path(&dj, path); /* Follow the file path */
+ if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
+ res = FR_INVALID_NAME;
+ if (res != FR_OK) LEAVE_FF(dj.fs, res); /* Follow failed */
+
+ dir = dj.dir;
+ if (!dir) /* Is it the root directory? */
+ LEAVE_FF(dj.fs, FR_INVALID_NAME);
+ if (dir[DIR_Attr] & AM_RDO) /* Is it a R/O object? */
+ LEAVE_FF(dj.fs, FR_DENIED);
+ dclst = ((DWORD)LD_WORD(dir+DIR_FstClusHI) << 16) | LD_WORD(dir+DIR_FstClusLO);
+
+ if (dir[DIR_Attr] & AM_DIR) { /* It is a sub-directory */
+ if (dclst < 2) LEAVE_FF(dj.fs, FR_INT_ERR);
+ mem_cpy(&sdj, &dj, sizeof(DIR)); /* Check if the sub-dir is empty or not */
+ sdj.sclust = dclst;
+ res = dir_seek(&sdj, 2);
+ if (res != FR_OK) LEAVE_FF(dj.fs, res);
+ res = dir_read(&sdj);
+ if (res == FR_OK) res = FR_DENIED; /* Not empty sub-dir */
+ if (res != FR_NO_FILE) LEAVE_FF(dj.fs, res);
+ }
+
+ res = dir_remove(&dj); /* Remove directory entry */
+ if (res == FR_OK) {
+ if (dclst)
+ res = remove_chain(dj.fs, dclst); /* Remove the cluster chain */
+ if (res == FR_OK) res = sync(dj.fs);
+ }
+
+ LEAVE_FF(dj.fs, res);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Create a Directory */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_mkdir (
+ const XCHAR *path /* Pointer to the directory path */
+)
+{
+ FRESULT res;
+ DIR dj;
+ NAMEBUF(sfn, lfn);
+ BYTE *dir, n;
+ DWORD dsect, dclst, pclst, tim;
+
+
+ res = chk_mounted(&path, &dj.fs, 1);
+ if (res != FR_OK) LEAVE_FF(dj.fs, res);
+
+ INITBUF(dj, sfn, lfn);
+ res = follow_path(&dj, path); /* Follow the file path */
+ if (res == FR_OK) res = FR_EXIST; /* Any file or directory is already existing */
+ if (_FS_RPATH && res == FR_NO_FILE && (dj.fn[NS] & NS_DOT))
+ res = FR_INVALID_NAME;
+ if (res != FR_NO_FILE) /* Any error occured */
+ LEAVE_FF(dj.fs, res);
+
+ dclst = create_chain(dj.fs, 0); /* Allocate a new cluster for new directory table */
+ res = FR_OK;
+ if (dclst == 0) res = FR_DENIED;
+ if (dclst == 1) res = FR_INT_ERR;
+ if (dclst == 0xFFFFFFFF) res = FR_DISK_ERR;
+ if (res == FR_OK)
+ res = move_window(dj.fs, 0);
+ if (res != FR_OK) LEAVE_FF(dj.fs, res);
+ dsect = clust2sect(dj.fs, dclst);
+
+ dir = dj.fs->win; /* Initialize the new directory table */
+ mem_set(dir, 0, SS(dj.fs));
+ mem_set(dir+DIR_Name, ' ', 8+3); /* Create "." entry */
+ dir[DIR_Name] = '.';
+ dir[DIR_Attr] = AM_DIR;
+ tim = get_fattime();
+ ST_DWORD(dir+DIR_WrtTime, tim);
+ ST_WORD(dir+DIR_FstClusLO, dclst);
+ ST_WORD(dir+DIR_FstClusHI, dclst >> 16);
+ mem_cpy(dir+32, dir, 32); /* Create ".." entry */
+ dir[33] = '.';
+ pclst = dj.sclust;
+ if (dj.fs->fs_type == FS_FAT32 && pclst == dj.fs->dirbase)
+ pclst = 0;
+ ST_WORD(dir+32+DIR_FstClusLO, pclst);
+ ST_WORD(dir+32+DIR_FstClusHI, pclst >> 16);
+ for (n = 0; n < dj.fs->csize; n++) { /* Write dot entries and clear left sectors */
+ dj.fs->winsect = dsect++;
+ dj.fs->wflag = 1;
+ res = move_window(dj.fs, 0);
+ if (res) LEAVE_FF(dj.fs, res);
+ mem_set(dir, 0, SS(dj.fs));
+ }
+
+ res = dir_register(&dj);
+ if (res != FR_OK) {
+ remove_chain(dj.fs, dclst);
+ } else {
+ dir = dj.dir;
+ dir[DIR_Attr] = AM_DIR; /* Attribute */
+ ST_DWORD(dir+DIR_WrtTime, tim); /* Crated time */
+ ST_WORD(dir+DIR_FstClusLO, dclst); /* Table start cluster */
+ ST_WORD(dir+DIR_FstClusHI, dclst >> 16);
+ dj.fs->wflag = 1;
+ res = sync(dj.fs);
+ }
+
+ LEAVE_FF(dj.fs, res);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Change File Attribute */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_chmod (
+ const XCHAR *path, /* Pointer to the file path */
+ BYTE value, /* Attribute bits */
+ BYTE mask /* Attribute mask to change */
+)
+{
+ FRESULT res;
+ DIR dj;
+ NAMEBUF(sfn, lfn);
+ BYTE *dir;
+
+
+ res = chk_mounted(&path, &dj.fs, 1);
+ if (res == FR_OK) {
+ INITBUF(dj, sfn, lfn);
+ res = follow_path(&dj, path); /* Follow the file path */
+ if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
+ res = FR_INVALID_NAME;
+ if (res == FR_OK) {
+ dir = dj.dir;
+ if (!dir) { /* Is it a root directory? */
+ res = FR_INVALID_NAME;
+ } else { /* File or sub directory */
+ mask &= AM_RDO|AM_HID|AM_SYS|AM_ARC; /* Valid attribute mask */
+ dir[DIR_Attr] = (value & mask) | (dir[DIR_Attr] & (BYTE)~mask); /* Apply attribute change */
+ dj.fs->wflag = 1;
+ res = sync(dj.fs);
+ }
+ }
+ }
+
+ LEAVE_FF(dj.fs, res);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Change Timestamp */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_utime (
+ const XCHAR *path, /* Pointer to the file/directory name */
+ const FILINFO *fno /* Pointer to the timestamp to be set */
+)
+{
+ FRESULT res;
+ DIR dj;
+ NAMEBUF(sfn, lfn);
+ BYTE *dir;
+
+
+ res = chk_mounted(&path, &dj.fs, 1);
+ if (res == FR_OK) {
+ INITBUF(dj, sfn, lfn);
+ res = follow_path(&dj, path); /* Follow the file path */
+ if (_FS_RPATH && res == FR_OK && (dj.fn[NS] & NS_DOT))
+ res = FR_INVALID_NAME;
+ if (res == FR_OK) {
+ dir = dj.dir;
+ if (!dir) { /* Root directory */
+ res = FR_INVALID_NAME;
+ } else { /* File or sub-directory */
+ ST_WORD(dir+DIR_WrtTime, fno->ftime);
+ ST_WORD(dir+DIR_WrtDate, fno->fdate);
+ dj.fs->wflag = 1;
+ res = sync(dj.fs);
+ }
+ }
+ }
+
+ LEAVE_FF(dj.fs, res);
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Rename File/Directory */
+/*-----------------------------------------------------------------------*/
+
+FRESULT f_rename (
+ const XCHAR *path_old, /* Pointer to the old name */
+ const XCHAR *path_new /* Pointer to the new name */
+)
+{
+ FRESULT res;
+ DIR dj_old, dj_new;
+ NAMEBUF(sfn, lfn);
+ BYTE buf[21], *dir;
+ DWORD dw;
+
+
+ INITBUF(dj_old, sfn, lfn);
+ res = chk_mounted(&path_old, &dj_old.fs, 1);
+ if (res == FR_OK) {
+ dj_new.fs = dj_old.fs;
+ res = follow_path(&dj_old, path_old); /* Check old object */
+ if (_FS_RPATH && res == FR_OK && (dj_old.fn[NS] & NS_DOT))
+ res = FR_INVALID_NAME;
+ }
+ if (res != FR_OK) LEAVE_FF(dj_old.fs, res); /* The old object is not found */
+
+ if (!dj_old.dir) LEAVE_FF(dj_old.fs, FR_NO_FILE); /* Is root dir? */
+ mem_cpy(buf, dj_old.dir+DIR_Attr, 21); /* Save the object information */
+
+ mem_cpy(&dj_new, &dj_old, sizeof(DIR));
+ res = follow_path(&dj_new, path_new); /* Check new object */
+ if (res == FR_OK) res = FR_EXIST; /* The new object name is already existing */
+ if (res == FR_NO_FILE) { /* Is it a valid path and no name collision? */
+ res = dir_register(&dj_new); /* Register the new object */
+ if (res == FR_OK) {
+ dir = dj_new.dir; /* Copy object information into new entry */
+ mem_cpy(dir+13, buf+2, 19);
+ dir[DIR_Attr] = buf[0] | AM_ARC;
+ dj_old.fs->wflag = 1;
+ if (dir[DIR_Attr] & AM_DIR) { /* Update .. entry in the directory if needed */
+ dw = clust2sect(dj_new.fs, (DWORD)LD_WORD(dir+DIR_FstClusHI) | LD_WORD(dir+DIR_FstClusLO));
+ if (!dw) {
+ res = FR_INT_ERR;
+ } else {
+ res = move_window(dj_new.fs, dw);
+ dir = dj_new.fs->win+32;
+ if (res == FR_OK && dir[1] == '.') {
+ dw = (dj_new.fs->fs_type == FS_FAT32 && dj_new.sclust == dj_new.fs->dirbase) ? 0 : dj_new.sclust;
+ ST_WORD(dir+DIR_FstClusLO, dw);
+ ST_WORD(dir+DIR_FstClusHI, dw >> 16);
+ dj_new.fs->wflag = 1;
+ }
+ }
+ }
+ if (res == FR_OK) {
+ res = dir_remove(&dj_old); /* Remove old entry */
+ if (res == FR_OK)
+ res = sync(dj_old.fs);
+ }
+ }
+ }
+
+ LEAVE_FF(dj_old.fs, res);
+}
+
+#endif /* !_FS_READONLY */
+#endif /* _FS_MINIMIZE == 0 */
+#endif /* _FS_MINIMIZE <= 1 */
+#endif /* _FS_MINIMIZE <= 2 */
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Forward data to the stream directly (Available on only _FS_TINY cfg) */
+/*-----------------------------------------------------------------------*/
+#if _USE_FORWARD && _FS_TINY
+
+FRESULT f_forward (
+ FIL *fp, /* Pointer to the file object */
+ UINT (*func)(const BYTE*,UINT), /* Pointer to the streaming function */
+ UINT btr, /* Number of bytes to forward */
+ UINT *bf /* Pointer to number of bytes forwarded */
+)
+{
+ FRESULT res;
+ DWORD remain, clst, sect;
+ UINT rcnt;
+
+
+ *bf = 0;
+
+ res = validate(fp->fs, fp->id); /* Check validity of the object */
+ if (res != FR_OK) LEAVE_FF(fp->fs, res);
+ if (fp->flag & FA__ERROR) /* Check error flag */
+ LEAVE_FF(fp->fs, FR_INT_ERR);
+ if (!(fp->flag & FA_READ)) /* Check access mode */
+ LEAVE_FF(fp->fs, FR_DENIED);
+
+ remain = fp->fsize - fp->fptr;
+ if (btr > remain) btr = (UINT)remain; /* Truncate btr by remaining bytes */
+
+ for ( ; btr && (*func)(NULL, 0); /* Repeat until all data transferred or stream becomes busy */
+ fp->fptr += rcnt, *bf += rcnt, btr -= rcnt) {
+ if ((fp->fptr % SS(fp->fs)) == 0) { /* On the sector boundary? */
+ if (fp->csect >= fp->fs->csize) { /* On the cluster boundary? */
+ clst = (fp->fptr == 0) ? /* On the top of the file? */
+ fp->org_clust : get_fat(fp->fs, fp->curr_clust);
+ if (clst <= 1) ABORT(fp->fs, FR_INT_ERR);
+ if (clst == 0xFFFFFFFF) ABORT(fp->fs, FR_DISK_ERR);
+ fp->curr_clust = clst; /* Update current cluster */
+ fp->csect = 0; /* Reset sector address in the cluster */
+ }
+ fp->csect++; /* Next sector address in the cluster */
+ }
+ sect = clust2sect(fp->fs, fp->curr_clust); /* Get current data sector */
+ if (!sect) ABORT(fp->fs, FR_INT_ERR);
+ sect += fp->csect - 1;
+ if (move_window(fp->fs, sect)) /* Move sector window */
+ ABORT(fp->fs, FR_DISK_ERR);
+ fp->dsect = sect;
+ rcnt = SS(fp->fs) - (WORD)(fp->fptr % SS(fp->fs)); /* Forward data from sector window */
+ if (rcnt > btr) rcnt = btr;
+ rcnt = (*func)(&fp->fs->win[(WORD)fp->fptr % SS(fp->fs)], rcnt);
+ if (!rcnt) ABORT(fp->fs, FR_INT_ERR);
+ }
+
+ LEAVE_FF(fp->fs, FR_OK);
+}
+#endif /* _USE_FORWARD */
+
+
+
+#if _USE_MKFS && !_FS_READONLY
+/*-----------------------------------------------------------------------*/
+/* Create File System on the Drive */
+/*-----------------------------------------------------------------------*/
+#define N_ROOTDIR 512 /* Multiple of 32 and <= 2048 */
+#define N_FATS 1 /* 1 or 2 */
+#define MAX_SECTOR 131072000UL /* Maximum partition size */
+#define MIN_SECTOR 2000UL /* Minimum partition size */
+
+
+FRESULT f_mkfs (
+ BYTE drv, /* Logical drive number */
+ BYTE partition, /* Partitioning rule 0:FDISK, 1:SFD */
+ WORD allocsize /* Allocation unit size [bytes] */
+)
+{
+ static const DWORD sstbl[] = { 2048000, 1024000, 512000, 256000, 128000, 64000, 32000, 16000, 8000, 4000, 0 };
+ static const WORD cstbl[] = { 32768, 16384, 8192, 4096, 2048, 16384, 8192, 4096, 2048, 1024, 512 };
+ BYTE fmt, m, *tbl;
+ DWORD b_part, b_fat, b_dir, b_data; /* Area offset (LBA) */
+ DWORD n_part, n_rsv, n_fat, n_dir; /* Area size */
+ DWORD n_clst, d, n;
+ WORD as;
+ FATFS *fs;
+ DSTATUS stat;
+
+
+ /* Check validity of the parameters */
+ if (drv >= _DRIVES) return FR_INVALID_DRIVE;
+ if (partition >= 2) return FR_MKFS_ABORTED;
+
+ /* Check mounted drive and clear work area */
+ fs = FatFs[drv];
+ if (!fs) return FR_NOT_ENABLED;
+ fs->fs_type = 0;
+ drv = LD2PD(drv);
+
+ /* Get disk statics */
+ stat = disk_initialize(drv);
+ if (stat & STA_NOINIT) return FR_NOT_READY;
+ if (stat & STA_PROTECT) return FR_WRITE_PROTECTED;
+#if _MAX_SS != 512 /* Get disk sector size */
+ if (disk_ioctl(drv, GET_SECTOR_SIZE, &SS(fs)) != RES_OK
+ || SS(fs) > _MAX_SS)
+ return FR_MKFS_ABORTED;
+#endif
+ if (disk_ioctl(drv, GET_SECTOR_COUNT, &n_part) != RES_OK || n_part < MIN_SECTOR)
+ return FR_MKFS_ABORTED;
+ if (n_part > MAX_SECTOR) n_part = MAX_SECTOR;
+ b_part = (!partition) ? 63 : 0; /* Boot sector */
+ n_part -= b_part;
+ for (d = 512; d <= 32768U && d != allocsize; d <<= 1) ; /* Check validity of the allocation unit size */
+ if (d != allocsize) allocsize = 0;
+ if (!allocsize) { /* Auto selection of cluster size */
+ d = n_part;
+ for (as = SS(fs); as > 512U; as >>= 1) d >>= 1;
+ for (n = 0; d < sstbl[n]; n++) ;
+ allocsize = cstbl[n];
+ }
+ if (allocsize < SS(fs)) allocsize = SS(fs);
+
+ allocsize /= SS(fs); /* Number of sectors per cluster */
+
+ /* Pre-compute number of clusters and FAT type */
+ n_clst = n_part / allocsize;
+ fmt = FS_FAT12;
+ if (n_clst >= 0xFF5) fmt = FS_FAT16;
+ if (n_clst >= 0xFFF5) fmt = FS_FAT32;
+
+ /* Determine offset and size of FAT structure */
+ switch (fmt) {
+ case FS_FAT12:
+ n_fat = ((n_clst * 3 + 1) / 2 + 3 + SS(fs) - 1) / SS(fs);
+ n_rsv = 1 + partition;
+ n_dir = N_ROOTDIR * 32 / SS(fs);
+ break;
+ case FS_FAT16:
+ n_fat = ((n_clst * 2) + 4 + SS(fs) - 1) / SS(fs);
+ n_rsv = 1 + partition;
+ n_dir = N_ROOTDIR * 32 / SS(fs);
+ break;
+ default:
+ n_fat = ((n_clst * 4) + 8 + SS(fs) - 1) / SS(fs);
+ n_rsv = 33 - partition;
+ n_dir = 0;
+ }
+ b_fat = b_part + n_rsv; /* FATs start sector */
+ b_dir = b_fat + n_fat * N_FATS; /* Directory start sector */
+ b_data = b_dir + n_dir; /* Data start sector */
+
+ /* Align data start sector to erase block boundary (for flash memory media) */
+ if (disk_ioctl(drv, GET_BLOCK_SIZE, &n) != RES_OK) return FR_MKFS_ABORTED;
+ n = (b_data + n - 1) & ~(n - 1);
+ n_fat += (n - b_data) / N_FATS;
+ /* b_dir and b_data are no longer used below */
+
+ /* Determine number of cluster and final check of validity of the FAT type */
+ n_clst = (n_part - n_rsv - n_fat * N_FATS - n_dir) / allocsize;
+ if ( (fmt == FS_FAT16 && n_clst < 0xFF5)
+ || (fmt == FS_FAT32 && n_clst < 0xFFF5))
+ return FR_MKFS_ABORTED;
+
+ /* Create partition table if needed */
+ if (!partition) {
+ DWORD n_disk = b_part + n_part;
+
+ mem_set(fs->win, 0, SS(fs));
+ tbl = fs->win+MBR_Table;
+ ST_DWORD(tbl, 0x00010180); /* Partition start in CHS */
+ if (n_disk < 63UL * 255 * 1024) { /* Partition end in CHS */
+ n_disk = n_disk / 63 / 255;
+ tbl[7] = (BYTE)n_disk;
+ tbl[6] = (BYTE)((n_disk >> 2) | 63);
+ } else {
+ ST_WORD(&tbl[6], 0xFFFF);
+ }
+ tbl[5] = 254;
+ if (fmt != FS_FAT32) /* System ID */
+ tbl[4] = (n_part < 0x10000) ? 0x04 : 0x06;
+ else
+ tbl[4] = 0x0c;
+ ST_DWORD(tbl+8, 63); /* Partition start in LBA */
+ ST_DWORD(tbl+12, n_part); /* Partition size in LBA */
+ ST_WORD(tbl+64, 0xAA55); /* Signature */
+ if (disk_write(drv, fs->win, 0, 1) != RES_OK)
+ return FR_DISK_ERR;
+ partition = 0xF8;
+ } else {
+ partition = 0xF0;
+ }
+
+ /* Create boot record */
+ tbl = fs->win; /* Clear buffer */
+ mem_set(tbl, 0, SS(fs));
+ ST_DWORD(tbl+BS_jmpBoot, 0x90FEEB); /* Boot code (jmp $, nop) */
+ ST_WORD(tbl+BPB_BytsPerSec, SS(fs)); /* Sector size */
+ tbl[BPB_SecPerClus] = (BYTE)allocsize; /* Sectors per cluster */
+ ST_WORD(tbl+BPB_RsvdSecCnt, n_rsv); /* Reserved sectors */
+ tbl[BPB_NumFATs] = N_FATS; /* Number of FATs */
+ ST_WORD(tbl+BPB_RootEntCnt, SS(fs) / 32 * n_dir); /* Number of rootdir entries */
+ if (n_part < 0x10000) { /* Number of total sectors */
+ ST_WORD(tbl+BPB_TotSec16, n_part);
+ } else {
+ ST_DWORD(tbl+BPB_TotSec32, n_part);
+ }
+ tbl[BPB_Media] = partition; /* Media descripter */
+ ST_WORD(tbl+BPB_SecPerTrk, 63); /* Number of sectors per track */
+ ST_WORD(tbl+BPB_NumHeads, 255); /* Number of heads */
+ ST_DWORD(tbl+BPB_HiddSec, b_part); /* Hidden sectors */
+ n = get_fattime(); /* Use current time as a VSN */
+ if (fmt != FS_FAT32) {
+ ST_DWORD(tbl+BS_VolID, n); /* Volume serial number */
+ ST_WORD(tbl+BPB_FATSz16, n_fat); /* Number of secters per FAT */
+ tbl[BS_DrvNum] = 0x80; /* Drive number */
+ tbl[BS_BootSig] = 0x29; /* Extended boot signature */
+ mem_cpy(tbl+BS_VolLab, "NO NAME FAT ", 19); /* Volume lavel, FAT signature */
+ } else {
+ ST_DWORD(tbl+BS_VolID32, n); /* Volume serial number */
+ ST_DWORD(tbl+BPB_FATSz32, n_fat); /* Number of secters per FAT */
+ ST_DWORD(tbl+BPB_RootClus, 2); /* Root directory cluster (2) */
+ ST_WORD(tbl+BPB_FSInfo, 1); /* FSInfo record offset (bs+1) */
+ ST_WORD(tbl+BPB_BkBootSec, 6); /* Backup boot record offset (bs+6) */
+ tbl[BS_DrvNum32] = 0x80; /* Drive number */
+ tbl[BS_BootSig32] = 0x29; /* Extended boot signature */
+ mem_cpy(tbl+BS_VolLab32, "NO NAME FAT32 ", 19); /* Volume lavel, FAT signature */
+ }
+ ST_WORD(tbl+BS_55AA, 0xAA55); /* Signature */
+ if (SS(fs) > 512U) {
+ ST_WORD(tbl+SS(fs)-2, 0xAA55);
+ }
+ if (disk_write(drv, tbl, b_part+0, 1) != RES_OK)
+ return FR_DISK_ERR;
+ if (fmt == FS_FAT32)
+ disk_write(drv, tbl, b_part+6, 1);
+
+ /* Initialize FAT area */
+ for (m = 0; m < N_FATS; m++) {
+ mem_set(tbl, 0, SS(fs)); /* 1st sector of the FAT */
+ if (fmt != FS_FAT32) {
+ n = (fmt == FS_FAT12) ? 0x00FFFF00 : 0xFFFFFF00;
+ n |= partition;
+ ST_DWORD(tbl, n); /* Reserve cluster #0-1 (FAT12/16) */
+ } else {
+ ST_DWORD(tbl+0, 0xFFFFFFF8); /* Reserve cluster #0-1 (FAT32) */
+ ST_DWORD(tbl+4, 0xFFFFFFFF);
+ ST_DWORD(tbl+8, 0x0FFFFFFF); /* Reserve cluster #2 for root dir */
+ }
+ if (disk_write(drv, tbl, b_fat++, 1) != RES_OK)
+ return FR_DISK_ERR;
+ mem_set(tbl, 0, SS(fs)); /* Following FAT entries are filled by zero */
+ for (n = 1; n < n_fat; n++) {
+ if (disk_write(drv, tbl, b_fat++, 1) != RES_OK)
+ return FR_DISK_ERR;
+ }
+ }
+
+ /* Initialize Root directory */
+ m = (BYTE)((fmt == FS_FAT32) ? allocsize : n_dir);
+ do {
+ if (disk_write(drv, tbl, b_fat++, 1) != RES_OK)
+ return FR_DISK_ERR;
+ } while (--m);
+
+ /* Create FSInfo record if needed */
+ if (fmt == FS_FAT32) {
+ ST_WORD(tbl+BS_55AA, 0xAA55);
+ ST_DWORD(tbl+FSI_LeadSig, 0x41615252);
+ ST_DWORD(tbl+FSI_StrucSig, 0x61417272);
+ ST_DWORD(tbl+FSI_Free_Count, n_clst - 1);
+ ST_DWORD(tbl+FSI_Nxt_Free, 0xFFFFFFFF);
+ disk_write(drv, tbl, b_part+1, 1);
+ disk_write(drv, tbl, b_part+7, 1);
+ }
+
+ return (disk_ioctl(drv, CTRL_SYNC, (void*)NULL) == RES_OK) ? FR_OK : FR_DISK_ERR;
+}
+
+#endif /* _USE_MKFS && !_FS_READONLY */
+
+
+
+
+#if _USE_STRFUNC
+/*-----------------------------------------------------------------------*/
+/* Get a string from the file */
+/*-----------------------------------------------------------------------*/
+char* f_gets (
+ char* buff, /* Pointer to the string buffer to read */
+ int len, /* Size of string buffer */
+ FIL* fil /* Pointer to the file object */
+)
+{
+ int i = 0;
+ char *p = buff;
+ UINT rc;
+
+
+ while (i < len - 1) { /* Read bytes until buffer gets filled */
+ f_read(fil, p, 1, &rc);
+ if (rc != 1) break; /* Break when no data to read */
+#if _USE_STRFUNC >= 2
+ if (*p == '\r') continue; /* Strip '\r' */
+#endif
+ i++;
+ if (*p++ == '\n') break; /* Break when reached end of line */
+ }
+ *p = 0;
+ return i ? buff : NULL; /* When no data read (eof or error), return with error. */
+}
+
+
+
+#if !_FS_READONLY
+#include <stdarg.h>
+/*-----------------------------------------------------------------------*/
+/* Put a character to the file */
+/*-----------------------------------------------------------------------*/
+int f_putc (
+ int chr, /* A character to be output */
+ FIL* fil /* Ponter to the file object */
+)
+{
+ UINT bw;
+ char c;
+
+
+#if _USE_STRFUNC >= 2
+ if (chr == '\n') f_putc ('\r', fil); /* LF -> CRLF conversion */
+#endif
+ if (!fil) { /* Special value may be used to switch the destination to any other device */
+ /* put_console(chr); */
+ return chr;
+ }
+ c = (char)chr;
+ f_write(fil, &c, 1, &bw); /* Write a byte to the file */
+ return bw ? chr : EOF; /* Return the result */
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Put a string to the file */
+/*-----------------------------------------------------------------------*/
+int f_puts (
+ const char* str, /* Pointer to the string to be output */
+ FIL* fil /* Pointer to the file object */
+)
+{
+ int n;
+
+
+ for (n = 0; *str; str++, n++) {
+ if (f_putc(*str, fil) == EOF) return EOF;
+ }
+ return n;
+}
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Put a formatted string to the file */
+/*-----------------------------------------------------------------------*/
+int f_printf (
+ FIL* fil, /* Pointer to the file object */
+ const char* str, /* Pointer to the format string */
+ ... /* Optional arguments... */
+)
+{
+ va_list arp;
+ UCHAR c, f, r;
+ ULONG val;
+ char s[16];
+ int i, w, res, cc;
+
+
+ va_start(arp, str);
+
+ for (cc = res = 0; cc != EOF; res += cc) {
+ c = *str++;
+ if (c == 0) break; /* End of string */
+ if (c != '%') { /* Non escape cahracter */
+ cc = f_putc(c, fil);
+ if (cc != EOF) cc = 1;
+ continue;
+ }
+ w = f = 0;
+ c = *str++;
+ if (c == '0') { /* Flag: '0' padding */
+ f = 1; c = *str++;
+ }
+ while (c >= '0' && c <= '9') { /* Precision */
+ w = w * 10 + (c - '0');
+ c = *str++;
+ }
+ if (c == 'l') { /* Prefix: Size is long int */
+ f |= 2; c = *str++;
+ }
+ if (c == 's') { /* Type is string */
+ cc = f_puts(va_arg(arp, char*), fil);
+ continue;
+ }
+ if (c == 'c') { /* Type is character */
+ cc = f_putc(va_arg(arp, int), fil);
+ if (cc != EOF) cc = 1;
+ continue;
+ }
+ r = 0;
+ if (c == 'd') r = 10; /* Type is signed decimal */
+ if (c == 'u') r = 10; /* Type is unsigned decimal */
+ if (c == 'X') r = 16; /* Type is unsigned hexdecimal */
+ if (r == 0) break; /* Unknown type */
+ if (f & 2) { /* Get the value */
+ val = (ULONG)va_arg(arp, long);
+ } else {
+ val = (c == 'd') ? (ULONG)(long)va_arg(arp, int) : (ULONG)va_arg(arp, unsigned int);
+ }
+ /* Put numeral string */
+ if (c == 'd') {
+ if (val & 0x80000000) {
+ val = 0 - val;
+ f |= 4;
+ }
+ }
+ i = sizeof(s) - 1; s[i] = 0;
+ do {
+ c = (UCHAR)(val % r + '0');
+ if (c > '9') c += 7;
+ s[--i] = c;
+ val /= r;
+ } while (i && val);
+ if (i && (f & 4)) s[--i] = '-';
+ w = sizeof(s) - 1 - w;
+ while (i && i > w) s[--i] = (f & 1) ? '0' : ' ';
+ cc = f_puts(&s[i], fil);
+ }
+
+ va_end(arp);
+ return (cc == EOF) ? cc : res;
+}
+
+#endif /* !_FS_READONLY */
+#endif /* _USE_STRFUNC */
--- /dev/null
+/*---------------------------------------------------------------------------/
+/ FatFs - FAT file system module include file R0.07e (C)ChaN, 2009
+/----------------------------------------------------------------------------/
+/ FatFs module is a generic FAT file system module for small embedded systems.
+/ This is a free software that opened for education, research and commercial
+/ developments under license policy of following trems.
+/
+/ Copyright (C) 2009, ChaN, all right reserved.
+/
+/ * The FatFs module is a free software and there is NO WARRANTY.
+/ * No restriction on use. You can use, modify and redistribute it for
+/ personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY.
+/ * Redistributions of source code must retain the above copyright notice.
+/----------------------------------------------------------------------------*/
+
+#ifndef _FATFS
+#define _FATFS 0x007E
+
+#include "integer.h" /* Basic integer types */
+#include "ffconf.h" /* FatFs configuration options */
+
+#if _FATFS != _FFCONFIG
+#error Wrong configuration file (ffconf.h).
+#endif
+
+
+/* DBCS code ranges and SBCS extend char conversion table */
+
+#if _CODE_PAGE == 932 /* Japanese Shift-JIS */
+#define _DF1S 0x81 /* DBC 1st byte range 1 start */
+#define _DF1E 0x9F /* DBC 1st byte range 1 end */
+#define _DF2S 0xE0 /* DBC 1st byte range 2 start */
+#define _DF2E 0xFC /* DBC 1st byte range 2 end */
+#define _DS1S 0x40 /* DBC 2nd byte range 1 start */
+#define _DS1E 0x7E /* DBC 2nd byte range 1 end */
+#define _DS2S 0x80 /* DBC 2nd byte range 2 start */
+#define _DS2E 0xFC /* DBC 2nd byte range 2 end */
+
+#elif _CODE_PAGE == 936 /* Simplified Chinese GBK */
+#define _DF1S 0x81
+#define _DF1E 0xFE
+#define _DS1S 0x40
+#define _DS1E 0x7E
+#define _DS2S 0x80
+#define _DS2E 0xFE
+
+#elif _CODE_PAGE == 949 /* Korean */
+#define _DF1S 0x81
+#define _DF1E 0xFE
+#define _DS1S 0x41
+#define _DS1E 0x5A
+#define _DS2S 0x61
+#define _DS2E 0x7A
+#define _DS3S 0x81
+#define _DS3E 0xFE
+
+#elif _CODE_PAGE == 950 /* Traditional Chinese Big5 */
+#define _DF1S 0x81
+#define _DF1E 0xFE
+#define _DS1S 0x40
+#define _DS1E 0x7E
+#define _DS2S 0xA1
+#define _DS2E 0xFE
+
+#elif _CODE_PAGE == 437 /* U.S. (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x9A,0x90,0x41,0x8E,0x41,0x8F,0x80,0x45,0x45,0x45,0x49,0x49,0x49,0x8E,0x8F,0x90,0x92,0x92,0x4F,0x99,0x4F,0x55,0x55,0x59,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+ 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 720 /* Arabic (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x45,0x41,0x84,0x41,0x86,0x43,0x45,0x45,0x45,0x49,0x49,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x49,0x49,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+ 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 737 /* Greek (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x92,0x92,0x93,0x94,0x95,0x96,0x97,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87, \
+ 0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0xAA,0x92,0x93,0x94,0x95,0x96,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0x97,0xEA,0xEB,0xEC,0xE4,0xED,0xEE,0xE7,0xE8,0xF1,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 775 /* Baltic (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x9A,0x91,0xA0,0x8E,0x95,0x8F,0x80,0xAD,0xED,0x8A,0x8A,0xA1,0x8D,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0x95,0x96,0x97,0x97,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
+ 0xA0,0xA1,0xE0,0xA3,0xA3,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xB5,0xB6,0xB7,0xB8,0xBD,0xBE,0xC6,0xC7,0xA5,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE3,0xE8,0xE8,0xEA,0xEA,0xEE,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 850 /* Multilingual Latin 1 (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
+ 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 852 /* Latin 2 (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xDE,0x8F,0x80,0x9D,0xD3,0x8A,0x8A,0xD7,0x8D,0x8E,0x8F,0x90,0x91,0x91,0xE2,0x99,0x95,0x95,0x97,0x97,0x99,0x9A,0x9B,0x9B,0x9D,0x9E,0x9F, \
+ 0xB5,0xD6,0xE0,0xE9,0xA4,0xA4,0xA6,0xA6,0xA8,0xA8,0xAA,0x8D,0xAC,0xB8,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBD,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC6,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD2,0xD5,0xD6,0xD7,0xB7,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE3,0xD5,0xE6,0xE6,0xE8,0xE9,0xE8,0xEB,0xED,0xED,0xDD,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xEB,0xFC,0xFC,0xFE,0xFF}
+
+#elif _CODE_PAGE == 855 /* Cyrillic (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x81,0x81,0x83,0x83,0x85,0x85,0x87,0x87,0x89,0x89,0x8B,0x8B,0x8D,0x8D,0x8F,0x8F,0x91,0x91,0x93,0x93,0x95,0x95,0x97,0x97,0x99,0x99,0x9B,0x9B,0x9D,0x9D,0x9F,0x9F, \
+ 0xA1,0xA1,0xA3,0xA3,0xA5,0xA5,0xA7,0xA7,0xA9,0xA9,0xAB,0xAB,0xAD,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB6,0xB6,0xB8,0xB8,0xB9,0xBA,0xBB,0xBC,0xBE,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD3,0xD3,0xD5,0xD5,0xD7,0xD7,0xDD,0xD9,0xDA,0xDB,0xDC,0xDD,0xE0,0xDF, \
+ 0xE0,0xE2,0xE2,0xE4,0xE4,0xE6,0xE6,0xE8,0xE8,0xEA,0xEA,0xEC,0xEC,0xEE,0xEE,0xEF,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF8,0xFA,0xFA,0xFC,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 857 /* Turkish (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0x98,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x98,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9E, \
+ 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA6,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xDE,0x59,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 858 /* Multilingual Latin 1 + Euro (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x9A,0x90,0xB6,0x8E,0xB7,0x8F,0x80,0xD2,0xD3,0xD4,0xD8,0xD7,0xDE,0x8E,0x8F,0x90,0x92,0x92,0xE2,0x99,0xE3,0xEA,0xEB,0x59,0x99,0x9A,0x9D,0x9C,0x9D,0x9E,0x9F, \
+ 0xB5,0xD6,0xE0,0xE9,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC7,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD1,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE5,0xE5,0xE6,0xE7,0xE7,0xE9,0xEA,0xEB,0xED,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 862 /* Hebrew (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+ 0x41,0x49,0x4F,0x55,0xA5,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0x21,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 866 /* Russian (OEM) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+ 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0x90,0x91,0x92,0x93,0x9d,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F,0xF0,0xF0,0xF2,0xF2,0xF4,0xF4,0xF6,0xF6,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 874 /* Thai (OEM, Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+ 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 1250 /* Central Europe (Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
+ 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xA3,0xB4,0xB5,0xB6,0xB7,0xB8,0xA5,0xAA,0xBB,0xBC,0xBD,0xBC,0xAF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
+
+#elif _CODE_PAGE == 1251 /* Cyrillic (Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x82,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x80,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x8D,0x8E,0x8F, \
+ 0xA0,0xA2,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB2,0xA5,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xA3,0xBD,0xBD,0xAF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF}
+
+#elif _CODE_PAGE == 1252 /* Latin 1 (Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0xAd,0x9B,0x8C,0x9D,0xAE,0x9F, \
+ 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
+
+#elif _CODE_PAGE == 1253 /* Greek (Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+ 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xA2,0xB8,0xB9,0xBA, \
+ 0xE0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xFB,0xBC,0xFD,0xBF,0xFF}
+
+#elif _CODE_PAGE == 1254 /* Turkish (Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x8A,0x9B,0x8C,0x9D,0x9E,0x9F, \
+ 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0x9F}
+
+#elif _CODE_PAGE == 1255 /* Hebrew (Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+ 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xE0,0xE1,0xE2,0xE3,0xE4,0xE5,0xE6,0xE7,0xE8,0xE9,0xEA,0xEB,0xEC,0xED,0xEE,0xEF,0xF0,0xF1,0xF2,0xF3,0xF4,0xF5,0xF6,0xF7,0xF8,0xF9,0xFA,0xFB,0xFC,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 1256 /* Arabic (Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x8C,0x9D,0x9E,0x9F, \
+ 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0x41,0xE1,0x41,0xE3,0xE4,0xE5,0xE6,0x43,0x45,0x45,0x45,0x45,0xEC,0xED,0x49,0x49,0xF0,0xF1,0xF2,0xF3,0x4F,0xF5,0xF6,0xF7,0xF8,0x55,0xFA,0x55,0x55,0xFD,0xFE,0xFF}
+
+#elif _CODE_PAGE == 1257 /* Baltic (Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0x9C,0x9D,0x9E,0x9F, \
+ 0xA0,0xA1,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xA8,0xB9,0xAA,0xBB,0xBC,0xBD,0xBE,0xAF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xFF}
+
+#elif _CODE_PAGE == 1258 /* Vietnam (OEM, Windows) */
+#define _DF1S 0
+#define _EXCVT {0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8A,0x8B,0x8C,0x8D,0x8E,0x8F,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9A,0x9B,0xAC,0x9D,0x9E,0x9F, \
+ 0xA0,0x21,0xA2,0xA3,0xA4,0xA5,0xA6,0xA7,0xA8,0xA9,0xAA,0xAB,0xAC,0xAD,0xAE,0xAF,0xB0,0xB1,0xB2,0xB3,0xB4,0xB5,0xB6,0xB7,0xB8,0xB9,0xBA,0xBB,0xBC,0xBD,0xBE,0xBF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xCC,0xCD,0xCE,0xCF,0xD0,0xD1,0xD2,0xD3,0xD4,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xDE,0xDF, \
+ 0xC0,0xC1,0xC2,0xC3,0xC4,0xC5,0xC6,0xC7,0xC8,0xC9,0xCA,0xCB,0xEC,0xCD,0xCE,0xCF,0xD0,0xD1,0xF2,0xD3,0xD4,0xD5,0xD6,0xF7,0xD8,0xD9,0xDA,0xDB,0xDC,0xDD,0xFE,0x9F}
+
+#elif _CODE_PAGE == 1 /* ASCII (for only non-LFN cfg) */
+#define _DF1S 0
+
+#else
+#error Unknown code page
+
+#endif
+
+
+
+/* Character code support macros */
+
+#define IsUpper(c) (((c)>='A')&&((c)<='Z'))
+#define IsLower(c) (((c)>='a')&&((c)<='z'))
+
+#if _DF1S /* DBCS configuration */
+
+#ifdef _DF2S /* Two 1st byte areas */
+#define IsDBCS1(c) (((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E) || ((BYTE)(c) >= _DF2S && (BYTE)(c) <= _DF2E))
+#else /* One 1st byte area */
+#define IsDBCS1(c) ((BYTE)(c) >= _DF1S && (BYTE)(c) <= _DF1E)
+#endif
+
+#ifdef _DS3S /* Three 2nd byte areas */
+#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E) || ((BYTE)(c) >= _DS3S && (BYTE)(c) <= _DS3E))
+#else /* Two 2nd byte areas */
+#define IsDBCS2(c) (((BYTE)(c) >= _DS1S && (BYTE)(c) <= _DS1E) || ((BYTE)(c) >= _DS2S && (BYTE)(c) <= _DS2E))
+#endif
+
+#else /* SBCS configuration */
+
+#define IsDBCS1(c) 0
+#define IsDBCS2(c) 0
+
+#endif /* _DF1S */
+
+
+
+/* Definitions corresponds to multi partition */
+
+#if _MULTI_PARTITION /* Multiple partition configuration */
+
+typedef struct _PARTITION {
+ BYTE pd; /* Physical drive# */
+ BYTE pt; /* Partition # (0-3) */
+} PARTITION;
+
+extern
+const PARTITION Drives[]; /* Logical drive# to physical location conversion table */
+#define LD2PD(drv) (Drives[drv].pd) /* Get physical drive# */
+#define LD2PT(drv) (Drives[drv].pt) /* Get partition# */
+
+#else /* Single partition configuration */
+
+#define LD2PD(drv) (drv) /* Physical drive# is equal to the logical drive# */
+#define LD2PT(drv) 0 /* Always mounts the 1st partition */
+
+#endif
+
+
+
+/* Definitions corresponds to multiple sector size */
+
+#if _MAX_SS == 512 /* Single sector size */
+#define SS(fs) 512U
+
+#elif _MAX_SS == 1024 || _MAX_SS == 2048 || _MAX_SS == 4096 /* Multiple sector size */
+#define SS(fs) ((fs)->s_size)
+
+#else
+#error Sector size must be 512, 1024, 2048 or 4096.
+
+#endif
+
+
+
+/* Type of file name on FatFs API */
+
+#if _LFN_UNICODE && _USE_LFN
+typedef WCHAR XCHAR; /* Unicode */
+#else
+typedef char XCHAR; /* SBCS, DBCS */
+#endif
+
+
+
+/* File system object structure */
+
+typedef struct _FATFS_ {
+ BYTE fs_type; /* FAT sub type */
+ BYTE drive; /* Physical drive number */
+ BYTE csize; /* Number of sectors per cluster */
+ BYTE n_fats; /* Number of FAT copies */
+ BYTE wflag; /* win[] dirty flag (1:must be written back) */
+ BYTE fsi_flag; /* fsinfo dirty flag (1:must be written back) */
+ WORD id; /* File system mount ID */
+ WORD n_rootdir; /* Number of root directory entries (0 on FAT32) */
+#if _FS_REENTRANT
+ _SYNC_t sobj; /* Identifier of sync object */
+#endif
+#if _MAX_SS != 512
+ WORD s_size; /* Sector size */
+#endif
+#if !_FS_READONLY
+ DWORD last_clust; /* Last allocated cluster */
+ DWORD free_clust; /* Number of free clusters */
+ DWORD fsi_sector; /* fsinfo sector */
+#endif
+#if _FS_RPATH
+ DWORD cdir; /* Current directory (0:root)*/
+#endif
+ DWORD sects_fat; /* Sectors per fat */
+ DWORD max_clust; /* Maximum cluster# + 1. Number of clusters is max_clust - 2 */
+ DWORD fatbase; /* FAT start sector */
+ DWORD dirbase; /* Root directory start sector (Cluster# on FAT32) */
+ DWORD database; /* Data start sector */
+ DWORD winsect; /* Current sector appearing in the win[] */
+ BYTE win[_MAX_SS];/* Disk access window for Directory/FAT */
+} FATFS;
+
+
+
+/* Directory object structure */
+
+typedef struct _DIR_ {
+ FATFS* fs; /* Pointer to the owner file system object */
+ WORD id; /* Owner file system mount ID */
+ WORD index; /* Current read/write index number */
+ DWORD sclust; /* Table start cluster (0:Static table) */
+ DWORD clust; /* Current cluster */
+ DWORD sect; /* Current sector */
+ BYTE* dir; /* Pointer to the current SFN entry in the win[] */
+ BYTE* fn; /* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */
+#if _USE_LFN
+ WCHAR* lfn; /* Pointer to the LFN working buffer */
+ WORD lfn_idx; /* Last matched LFN index number (0xFFFF:No LFN) */
+#endif
+} DIR;
+
+
+
+/* File object structure */
+
+typedef struct _FIL_ {
+ FATFS* fs; /* Pointer to the owner file system object */
+ WORD id; /* Owner file system mount ID */
+ BYTE flag; /* File status flags */
+ BYTE csect; /* Sector address in the cluster */
+ DWORD fptr; /* File R/W pointer */
+ DWORD fsize; /* File size */
+ DWORD org_clust; /* File start cluster */
+ DWORD curr_clust; /* Current cluster */
+ DWORD dsect; /* Current data sector */
+#if !_FS_READONLY
+ DWORD dir_sect; /* Sector containing the directory entry */
+ BYTE* dir_ptr; /* Ponter to the directory entry in the window */
+#endif
+#if !_FS_TINY
+ BYTE buf[_MAX_SS];/* File R/W buffer */
+#endif
+} FIL;
+
+
+
+/* File status structure */
+
+typedef struct _FILINFO_ {
+ DWORD fsize; /* File size */
+ WORD fdate; /* Last modified date */
+ WORD ftime; /* Last modified time */
+ BYTE fattrib; /* Attribute */
+ char fname[13]; /* Short file name (8.3 format) */
+#if _USE_LFN
+ XCHAR* lfname; /* Pointer to the LFN buffer */
+ int lfsize; /* Size of LFN buffer [chrs] */
+#endif
+} FILINFO;
+
+
+
+/* File function return code (FRESULT) */
+
+typedef enum {
+ FR_OK = 0, /* 0 */
+ FR_DISK_ERR, /* 1 */
+ FR_INT_ERR, /* 2 */
+ FR_NOT_READY, /* 3 */
+ FR_NO_FILE, /* 4 */
+ FR_NO_PATH, /* 5 */
+ FR_INVALID_NAME, /* 6 */
+ FR_DENIED, /* 7 */
+ FR_EXIST, /* 8 */
+ FR_INVALID_OBJECT, /* 9 */
+ FR_WRITE_PROTECTED, /* 10 */
+ FR_INVALID_DRIVE, /* 11 */
+ FR_NOT_ENABLED, /* 12 */
+ FR_NO_FILESYSTEM, /* 13 */
+ FR_MKFS_ABORTED, /* 14 */
+ FR_TIMEOUT /* 15 */
+} FRESULT;
+
+
+
+/*--------------------------------------------------------------*/
+/* FatFs module application interface */
+
+FRESULT f_mount (BYTE, FATFS*); /* Mount/Unmount a logical drive */
+FRESULT f_open (FIL*, const XCHAR*, BYTE); /* Open or create a file */
+FRESULT f_read (FIL*, void*, UINT, UINT*); /* Read data from a file */
+FRESULT f_write (FIL*, const void*, UINT, UINT*); /* Write data to a file */
+FRESULT f_lseek (FIL*, DWORD); /* Move file pointer of a file object */
+FRESULT f_close (FIL*); /* Close an open file object */
+FRESULT f_opendir (DIR*, const XCHAR*); /* Open an existing directory */
+FRESULT f_readdir (DIR*, FILINFO*); /* Read a directory item */
+FRESULT f_stat (const XCHAR*, FILINFO*); /* Get file status */
+FRESULT f_getfree (const XCHAR*, DWORD*, FATFS**); /* Get number of free clusters on the drive */
+FRESULT f_truncate (FIL*); /* Truncate file */
+FRESULT f_sync (FIL*); /* Flush cached data of a writing file */
+FRESULT f_unlink (const XCHAR*); /* Delete an existing file or directory */
+FRESULT f_mkdir (const XCHAR*); /* Create a new directory */
+FRESULT f_chmod (const XCHAR*, BYTE, BYTE); /* Change attriburte of the file/dir */
+FRESULT f_utime (const XCHAR*, const FILINFO*); /* Change timestamp of the file/dir */
+FRESULT f_rename (const XCHAR*, const XCHAR*); /* Rename/Move a file or directory */
+FRESULT f_forward (FIL*, UINT(*)(const BYTE*,UINT), UINT, UINT*); /* Forward data to the stream */
+FRESULT f_mkfs (BYTE, BYTE, WORD); /* Create a file system on the drive */
+FRESULT f_chdir (const XCHAR*); /* Change current directory */
+FRESULT f_chdrive (BYTE); /* Change current drive */
+
+#if _USE_STRFUNC
+int f_putc (int, FIL*); /* Put a character to the file */
+int f_puts (const char*, FIL*); /* Put a string to the file */
+int f_printf (FIL*, const char*, ...); /* Put a formatted string to the file */
+char* f_gets (char*, int, FIL*); /* Get a string from the file */
+#define f_eof(fp) (((fp)->fptr == (fp)->fsize) ? 1 : 0)
+#define f_error(fp) (((fp)->flag & FA__ERROR) ? 1 : 0)
+#ifndef EOF
+#define EOF -1
+#endif
+#endif
+
+
+
+/*--------------------------------------------------------------*/
+/* User defined functions */
+
+/* Real time clock */
+#if !_FS_READONLY
+DWORD get_fattime (void); /* 31-25: Year(0-127 org.1980), 24-21: Month(1-12), 20-16: Day(1-31) */
+ /* 15-11: Hour(0-23), 10-5: Minute(0-59), 4-0: Second(0-29 *2) */
+#endif
+
+/* Unicode - OEM code conversion */
+#if _USE_LFN
+WCHAR ff_convert (WCHAR, UINT);
+WCHAR ff_wtoupper (WCHAR);
+#endif
+
+/* Sync functions */
+#if _FS_REENTRANT
+BOOL ff_cre_syncobj(BYTE, _SYNC_t*);
+BOOL ff_del_syncobj(_SYNC_t);
+BOOL ff_req_grant(_SYNC_t);
+void ff_rel_grant(_SYNC_t);
+#endif
+
+
+
+/*--------------------------------------------------------------*/
+/* Flags and offset address */
+
+
+/* File access control and file status flags (FIL.flag) */
+
+#define FA_READ 0x01
+#define FA_OPEN_EXISTING 0x00
+#if _FS_READONLY == 0
+#define FA_WRITE 0x02
+#define FA_CREATE_NEW 0x04
+#define FA_CREATE_ALWAYS 0x08
+#define FA_OPEN_ALWAYS 0x10
+#define FA__WRITTEN 0x20
+#define FA__DIRTY 0x40
+#endif
+#define FA__ERROR 0x80
+
+
+/* FAT sub type (FATFS.fs_type) */
+
+#define FS_FAT12 1
+#define FS_FAT16 2
+#define FS_FAT32 3
+
+
+/* File attribute bits for directory entry */
+
+#define AM_RDO 0x01 /* Read only */
+#define AM_HID 0x02 /* Hidden */
+#define AM_SYS 0x04 /* System */
+#define AM_VOL 0x08 /* Volume label */
+#define AM_LFN 0x0F /* LFN entry */
+#define AM_DIR 0x10 /* Directory */
+#define AM_ARC 0x20 /* Archive */
+#define AM_MASK 0x3F /* Mask of defined bits */
+
+
+/* FatFs refers the members in the FAT structures with byte offset instead
+/ of structure member because there are incompatibility of the packing option
+/ between various compilers. */
+
+#define BS_jmpBoot 0
+#define BS_OEMName 3
+#define BPB_BytsPerSec 11
+#define BPB_SecPerClus 13
+#define BPB_RsvdSecCnt 14
+#define BPB_NumFATs 16
+#define BPB_RootEntCnt 17
+#define BPB_TotSec16 19
+#define BPB_Media 21
+#define BPB_FATSz16 22
+#define BPB_SecPerTrk 24
+#define BPB_NumHeads 26
+#define BPB_HiddSec 28
+#define BPB_TotSec32 32
+#define BS_55AA 510
+
+#define BS_DrvNum 36
+#define BS_BootSig 38
+#define BS_VolID 39
+#define BS_VolLab 43
+#define BS_FilSysType 54
+
+#define BPB_FATSz32 36
+#define BPB_ExtFlags 40
+#define BPB_FSVer 42
+#define BPB_RootClus 44
+#define BPB_FSInfo 48
+#define BPB_BkBootSec 50
+#define BS_DrvNum32 64
+#define BS_BootSig32 66
+#define BS_VolID32 67
+#define BS_VolLab32 71
+#define BS_FilSysType32 82
+
+#define FSI_LeadSig 0
+#define FSI_StrucSig 484
+#define FSI_Free_Count 488
+#define FSI_Nxt_Free 492
+
+#define MBR_Table 446
+
+#define DIR_Name 0
+#define DIR_Attr 11
+#define DIR_NTres 12
+#define DIR_CrtTime 14
+#define DIR_CrtDate 16
+#define DIR_FstClusHI 20
+#define DIR_WrtTime 22
+#define DIR_WrtDate 24
+#define DIR_FstClusLO 26
+#define DIR_FileSize 28
+#define LDIR_Ord 0
+#define LDIR_Attr 11
+#define LDIR_Type 12
+#define LDIR_Chksum 13
+#define LDIR_FstClusLO 26
+
+
+
+/*--------------------------------*/
+/* Multi-byte word access macros */
+
+#if _WORD_ACCESS == 1 /* Enable word access to the FAT structure */
+#define LD_WORD(ptr) (WORD)(*(WORD*)(BYTE*)(ptr))
+#define LD_DWORD(ptr) (DWORD)(*(DWORD*)(BYTE*)(ptr))
+#define ST_WORD(ptr,val) *(WORD*)(BYTE*)(ptr)=(WORD)(val)
+#define ST_DWORD(ptr,val) *(DWORD*)(BYTE*)(ptr)=(DWORD)(val)
+#else /* Use byte-by-byte access to the FAT structure */
+#define LD_WORD(ptr) (WORD)(((WORD)*(BYTE*)((ptr)+1)<<8)|(WORD)*(BYTE*)(ptr))
+#define LD_DWORD(ptr) (DWORD)(((DWORD)*(BYTE*)((ptr)+3)<<24)|((DWORD)*(BYTE*)((ptr)+2)<<16)|((WORD)*(BYTE*)((ptr)+1)<<8)|*(BYTE*)(ptr))
+#define ST_WORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *(BYTE*)((ptr)+1)=(BYTE)((WORD)(val)>>8)
+#define ST_DWORD(ptr,val) *(BYTE*)(ptr)=(BYTE)(val); *(BYTE*)((ptr)+1)=(BYTE)((WORD)(val)>>8); *(BYTE*)((ptr)+2)=(BYTE)((DWORD)(val)>>16); *(BYTE*)((ptr)+3)=(BYTE)((DWORD)(val)>>24)
+#endif
+
+
+#endif /* _FATFS */
--- /dev/null
+/*---------------------------------------------------------------------------/
+/ FatFs - FAT file system module configuration file R0.07e (C)ChaN, 2009
+/----------------------------------------------------------------------------/
+/
+/ CAUTION! Do not forget to make clean the project after any changes to
+/ the configuration options.
+/
+/----------------------------------------------------------------------------*/
+#ifndef _FFCONFIG
+#define _FFCONFIG 0x007E
+
+#include "projectconfig.h"
+
+/*---------------------------------------------------------------------------/
+/ Function and Buffer Configurations
+/----------------------------------------------------------------------------*/
+
+#define _FS_TINY 1 /* 0 or 1 */
+/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system
+/ object instead of the sector buffer in the individual file object for file
+/ data transfer. This reduces memory consumption 512 bytes each file object. */
+
+
+#define _FS_READONLY CFG_SDCARD_READONLY // 0 /* 0 or 1 */
+/* Setting _FS_READONLY to 1 defines read only configuration. This removes
+/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename,
+/ f_truncate and useless f_getfree. */
+
+
+#define _FS_MINIMIZE 0 /* 0, 1, 2 or 3 */
+/* The _FS_MINIMIZE option defines minimization level to remove some functions.
+/
+/ 0: Full function.
+/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename
+/ are removed.
+/ 2: f_opendir and f_readdir are removed in addition to level 1.
+/ 3: f_lseek is removed in addition to level 2. */
+
+
+#define _USE_STRFUNC 0 /* 0, 1 or 2 */
+/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
+
+
+#define _USE_MKFS 0 /* 0 or 1 */
+/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
+
+
+#define _USE_FORWARD 0 /* 0 or 1 */
+/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/----------------------------------------------------------------------------*/
+
+#define _CODE_PAGE 858
+/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
+/ Incorrect setting of the code page can cause a file open failure.
+/
+/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows)
+/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows)
+/ 949 - Korean (DBCS, OEM, Windows)
+/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows)
+/ 1250 - Central Europe (Windows)
+/ 1251 - Cyrillic (Windows)
+/ 1252 - Latin 1 (Windows)
+/ 1253 - Greek (Windows)
+/ 1254 - Turkish (Windows)
+/ 1255 - Hebrew (Windows)
+/ 1256 - Arabic (Windows)
+/ 1257 - Baltic (Windows)
+/ 1258 - Vietnam (OEM, Windows)
+/ 437 - U.S. (OEM)
+/ 720 - Arabic (OEM)
+/ 737 - Greek (OEM)
+/ 775 - Baltic (OEM)
+/ 850 - Multilingual Latin 1 (OEM)
+/ 858 - Multilingual Latin 1 + Euro (OEM)
+/ 852 - Latin 2 (OEM)
+/ 855 - Cyrillic (OEM)
+/ 866 - Russian (OEM)
+/ 857 - Turkish (OEM)
+/ 862 - Hebrew (OEM)
+/ 874 - Thai (OEM, Windows)
+/ 1 - ASCII only (Valid for non LFN cfg.)
+*/
+
+
+#define _USE_LFN 0 /* 0, 1 or 2 */
+#define _MAX_LFN 64 /* Maximum LFN length to handle (12 to 255) */
+/* The _USE_LFN option switches the LFN support.
+/
+/ 0: Disable LFN. _MAX_LFN and _LFN_UNICODE have no effect.
+/ 1: Enable LFN with static working buffer on the bss. NOT REENTRANT.
+/ 2: Enable LFN with dynamic working buffer on the STACK.
+/
+/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When enable LFN,
+/ two Unicode handling functions ff_convert() and ff_wtoupper() must be added
+/ to the project. */
+
+
+#define _LFN_UNICODE 0 /* 0 or 1 */
+/* To switch the character code set on FatFs API to Unicode,
+/ enable LFN feature and set _LFN_UNICODE to 1.
+*/
+
+
+#define _FS_RPATH 0 /* 0 or 1 */
+/* When _FS_RPATH is set to 1, relative path feature is enabled and f_chdir,
+/ f_chdrive function are available.
+/ Note that output of the f_readdir fnction is affected by this option. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ Physical Drive Configurations
+/----------------------------------------------------------------------------*/
+
+#define _DRIVES 1
+/* Number of volumes (logical drives) to be used. */
+
+
+#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */
+/* Maximum sector size to be handled.
+/ Always set 512 for memory card and hard disk but a larger value may be
+/ required for floppy disk (512/1024) and optical disk (512/2048).
+/ When _MAX_SS is larger than 512, GET_SECTOR_SIZE command must be implememted
+/ to the disk_ioctl function. */
+
+
+#define _MULTI_PARTITION 0 /* 0 or 1 */
+/* When _MULTI_PARTITION is set to 0, each volume is bound to the same physical
+/ drive number and can mount only first primaly partition. When it is set to 1,
+/ each volume is tied to the partitions listed in Drives[]. */
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/----------------------------------------------------------------------------*/
+
+#define _WORD_ACCESS 0 /* 0 or 1 */
+/* The _WORD_ACCESS option defines which access method is used to the word
+/ data on the FAT volume.
+/
+/ 0: Byte-by-byte access. Always compatible with all platforms.
+/ 1: Word access. Do not choose this unless following condition is met.
+/
+/ When the byte order on the memory is big-endian or address miss-aligned
+/ word access results incorrect behavior, the _WORD_ACCESS must be set to 0.
+/ If it is not the case, the value can also be set to 1 to improve the
+/ performance and code size. */
+
+
+#define _FS_REENTRANT 0 /* 0 or 1 */
+#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */
+#define _SYNC_t HANDLE /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */
+/* The _FS_REENTRANT option switches the reentrancy of the FatFs module.
+/
+/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect.
+/ 1: Enable reentrancy. Also user provided synchronization handlers,
+/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj
+/ function must be added to the project. */
+
+
+#endif /* _FFCONFIG */
--- /dev/null
+/*-------------------------------------------*/
+/* Integer type definitions for FatFs module */
+/*-------------------------------------------*/
+
+#ifndef _INTEGER
+
+#if 0
+#include <windows.h>
+#else
+
+/* These types must be 16-bit, 32-bit or larger integer */
+typedef int INT;
+typedef unsigned int UINT;
+
+/* These types must be 8-bit integer */
+typedef signed char CHAR;
+typedef unsigned char UCHAR;
+typedef unsigned char BYTE;
+
+/* These types must be 16-bit integer */
+typedef short SHORT;
+typedef unsigned short USHORT;
+typedef unsigned short WORD;
+typedef unsigned short WCHAR;
+
+/* These types must be 32-bit integer */
+typedef long LONG;
+typedef unsigned long ULONG;
+typedef unsigned long DWORD;
+
+#endif
+
+#define _INTEGER
+#endif
--- /dev/null
+/*-----------------------------------------------------------------------*/
+/* MMCv3/SDv1/SDv2 (in SPI mode) control module (C)ChaN, 2007 */
+/*-----------------------------------------------------------------------*/
+/* Only rcvr_spi(), xmit_spi(), disk_timerproc() and some macros */
+/* are platform dependent. */
+/*-----------------------------------------------------------------------*/
+
+
+#include "projectconfig.h"
+#include "diskio.h"
+#include "core/gpio/gpio.h"
+#include "core/ssp/ssp.h"
+#include "core/systick/systick.h"
+
+
+/* Definitions for MMC/SDC command */
+#define CMD0 (0x40+0) /* GO_IDLE_STATE */
+#define CMD1 (0x40+1) /* SEND_OP_COND (MMC) */
+#define ACMD41 (0xC0+41) /* SEND_OP_COND (SDC) */
+#define CMD8 (0x40+8) /* SEND_IF_COND */
+#define CMD9 (0x40+9) /* SEND_CSD */
+#define CMD10 (0x40+10) /* SEND_CID */
+#define CMD12 (0x40+12) /* STOP_TRANSMISSION */
+#define ACMD13 (0xC0+13) /* SD_STATUS (SDC) */
+#define CMD16 (0x40+16) /* SET_BLOCKLEN */
+#define CMD17 (0x40+17) /* READ_SINGLE_BLOCK */
+#define CMD18 (0x40+18) /* READ_MULTIPLE_BLOCK */
+#define CMD23 (0x40+23) /* SET_BLOCK_COUNT (MMC) */
+#define ACMD23 (0xC0+23) /* SET_WR_BLK_ERASE_COUNT (SDC) */
+#define CMD24 (0x40+24) /* WRITE_BLOCK */
+#define CMD25 (0x40+25) /* WRITE_MULTIPLE_BLOCK */
+#define CMD55 (0x40+55) /* APP_CMD */
+#define CMD58 (0x40+58) /* READ_OCR */
+
+
+/* Port Controls (Platform dependent) */
+#define CS_LOW() gpioSetValue(SSP0_CSPORT, SSP0_CSPIN, 0)
+#define CS_HIGH() gpioSetValue(SSP0_CSPORT, SSP0_CSPIN, 1)
+
+// #define FCLK_SLOW() /* Set slow clock (100k-400k) */
+// #define FCLK_FAST() /* Set fast clock (depends on the CSD) */
+
+#define FDELAY(ms) systickDelay(ms) // Assumes delay = 1ms, ugly
+
+/*--------------------------------------------------------------------------
+
+ Module Private Functions
+
+---------------------------------------------------------------------------*/
+
+static volatile
+DSTATUS Stat = STA_NOINIT; /* Disk status */
+
+static volatile
+BYTE Timer1, Timer2; /* 100Hz decrement timer */
+
+static
+BYTE CardType; /* Card type flags */
+
+/**************************************************************************/
+/*!
+ Set SSP clock to slow (400 KHz)
+*/
+/**************************************************************************/
+static void FCLK_SLOW()
+{
+ /* Divide by 10 (SSPCLKDIV also enables to SSP CLK) */
+ SCB_SSP0CLKDIV = SCB_SSP0CLKDIV_DIV10;
+
+ /* (PCLK / (CPSDVSR * [SCR+1])) = (7,200,000 / (2 x [8 + 1])) = 400 KHz */
+ uint32_t configReg = ( SSP_SSP0CR0_DSS_8BIT // Data size = 8-bit
+ | SSP_SSP0CR0_FRF_SPI // Frame format = SPI
+ | SSP_SSP0CR0_SCR_8); // Serial clock rate = 8
+
+ // Set clock polarity (low between frames)
+ // configReg &= ~SSP_SSP0CR0_CPOL_MASK;
+ // configReg |= SSP_SSP0CR0_CPOL_LOW;
+
+ // Set edge transition (leading edge)
+ // configReg &= ~SSP_SSP0CR0_CPHA_MASK;
+ // configReg |= SSP_SSP0CR0_CPHA_FIRST;
+
+ // Assign config values to SSP0CR0
+ SSP_SSP0CR0 = configReg;
+
+ /* Clock prescale register must be even and at least 2 in master mode */
+ SSP_SSP0CPSR = SSP_SSP0CPSR_CPSDVSR_DIV2;
+}
+
+/**************************************************************************/
+/*!
+ Set SSP clock to fast (6.0 MHz)
+*/
+/**************************************************************************/
+static void FCLK_FAST()
+{
+ /* Divide by 1 (SSPCLKDIV also enables to SSP CLK) */
+ SCB_SSP0CLKDIV = SCB_SSP0CLKDIV_DIV1;
+
+ /* (PCLK / (CPSDVSR * [SCR+1])) = (72,000,000 / (2 * [5 + 1])) = 6.0 MHz */
+ uint32_t configReg = ( SSP_SSP0CR0_DSS_8BIT // Data size = 8-bit
+ | SSP_SSP0CR0_FRF_SPI // Frame format = SPI
+ | SSP_SSP0CR0_SCR_5); // Serial clock rate = 5
+
+ // Set clock polarity (low between frames)
+ // configReg &= ~SSP_SSP0CR0_CPOL_MASK;
+ // configReg |= SSP_SSP0CR0_CPOL_LOW;
+
+ // Set edge transition (leading edge)
+ // configReg &= ~SSP_SSP0CR0_CPHA_MASK;
+ // configReg |= SSP_SSP0CR0_CPHA_FIRST;
+
+ // Assign config values to SSP0CR0
+ SSP_SSP0CR0 = configReg;
+
+ /* Clock prescale register must be even and at least 2 in master mode */
+ SSP_SSP0CPSR = SSP_SSP0CPSR_CPSDVSR_DIV2;
+}
+
+/*-----------------------------------------------------------------------*/
+/* Transmit a byte to MMC via SPI (Platform dependent) */
+/*-----------------------------------------------------------------------*/
+
+//#define xmit_spi(dat) (SSPSend((uint8_t*)&(dat), 1))
+static void xmit_spi(BYTE dat)
+{
+ sspSend(0, (uint8_t*) &dat, 1);
+}
+
+
+/*-----------------------------------------------------------------------*/
+/* Receive a byte from MMC via SPI (Platform dependent) */
+/*-----------------------------------------------------------------------*/
+
+static
+BYTE rcvr_spi (void)
+{
+ BYTE data = 0;
+
+ sspReceive(0, &data, 1);
+
+ return data;
+}
+
+/* Alternative macro to receive data fast */
+
+#define rcvr_spi_m(dst) \
+ do { \
+ sspReceive(0, (uint8_t*)(dst), 1); \
+ } while(0)
+
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Wait for card ready */
+/*-----------------------------------------------------------------------*/
+
+static
+BYTE wait_ready (void)
+{
+ BYTE res;
+
+
+ Timer2 = 50; /* Wait for ready in timeout of 500ms */
+ rcvr_spi();
+ do
+ res = rcvr_spi();
+ while ((res != 0xFF) && Timer2);
+
+ return res;
+}
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Deselect the card and release SPI bus */
+/*-----------------------------------------------------------------------*/
+
+static
+void deselect (void)
+{
+ CS_HIGH();
+ rcvr_spi();
+}
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Select the card and wait ready */
+/*-----------------------------------------------------------------------*/
+
+static
+BOOL select (void) /* TRUE:Successful, FALSE:Timeout */
+{
+ CS_LOW();
+ if (wait_ready() != 0xFF) {
+ deselect();
+ return FALSE;
+ }
+ return TRUE;
+}
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Power Control (Platform dependent) */
+/*-----------------------------------------------------------------------*/
+/* When the target system does not support socket power control, there */
+/* is nothing to do in these functions and chk_power always returns 1. */
+
+static
+void power_on (void)
+{
+}
+
+static
+void power_off (void)
+{
+}
+
+static
+int chk_power(void) /* Socket power state: 0=off, 1=on */
+{
+ return 1;
+}
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Receive a data packet from MMC */
+/*-----------------------------------------------------------------------*/
+
+static
+BOOL rcvr_datablock (
+ BYTE *buff, /* Data buffer to store received data */
+ UINT btr /* Byte count (must be multiple of 4) */
+)
+{
+ BYTE token;
+
+
+ Timer1 = 20;
+ do { /* Wait for data packet in timeout of 200ms */
+ token = rcvr_spi();
+ } while ((token == 0xFF) && Timer1);
+ if(token != 0xFE) return FALSE; /* If not valid data token, retutn with error */
+
+ do { /* Receive the data block into buffer */
+ rcvr_spi_m(buff++);
+ rcvr_spi_m(buff++);
+ rcvr_spi_m(buff++);
+ rcvr_spi_m(buff++);
+ } while (btr -= 4);
+ rcvr_spi(); /* Discard CRC */
+ rcvr_spi();
+
+ return TRUE; /* Return with success */
+}
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Send a data packet to MMC */
+/*-----------------------------------------------------------------------*/
+
+#if _READONLY == 0
+static
+BOOL xmit_datablock (
+ const BYTE *buff, /* 512 byte data block to be transmitted */
+ BYTE token /* Data/Stop token */
+)
+{
+ BYTE resp, wc;
+
+
+ if (wait_ready() != 0xFF) return FALSE;
+
+ xmit_spi(token); /* Xmit data token */
+ if (token != 0xFD) { /* Is data token */
+ wc = 0;
+ do { /* Xmit the 512 byte data block to MMC */
+ xmit_spi(*buff++);
+ xmit_spi(*buff++);
+ } while (--wc);
+ xmit_spi(0xFF); /* CRC (Dummy) */
+ xmit_spi(0xFF);
+ resp = rcvr_spi(); /* Reveive data response */
+ if ((resp & 0x1F) != 0x05) /* If not accepted, return with error */
+ return FALSE;
+ }
+
+ return TRUE;
+}
+#endif /* _READONLY */
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Send a command packet to MMC */
+/*-----------------------------------------------------------------------*/
+
+static
+BYTE send_cmd (
+ BYTE cmd, /* Command byte */
+ DWORD arg /* Argument */
+)
+{
+ BYTE n, res;
+
+
+ if (cmd & 0x80) { /* ACMD<n> is the command sequense of CMD55-CMD<n> */
+ cmd &= 0x7F;
+ res = send_cmd(CMD55, 0);
+ if (res > 1) return res;
+ }
+
+ /* Select the card and wait for ready */
+ deselect();
+ if (!select()) return 0xFF;
+
+ /* Send command packet */
+ xmit_spi(cmd); /* Start + Command index */
+ xmit_spi((BYTE)(arg >> 24)); /* Argument[31..24] */
+ xmit_spi((BYTE)(arg >> 16)); /* Argument[23..16] */
+ xmit_spi((BYTE)(arg >> 8)); /* Argument[15..8] */
+ xmit_spi((BYTE)arg); /* Argument[7..0] */
+ n = 0x01; /* Dummy CRC + Stop */
+ if (cmd == CMD0) n = 0x95; /* Valid CRC for CMD0(0) */
+ if (cmd == CMD8) n = 0x87; /* Valid CRC for CMD8(0x1AA) */
+ xmit_spi(n);
+
+ /* Receive command response */
+ if (cmd == CMD12) rcvr_spi(); /* Skip a stuff byte when stop reading */
+ n = 10; /* Wait for a valid response in timeout of 10 attempts */
+ do
+ res = rcvr_spi();
+ while ((res & 0x80) && --n);
+
+ return res; /* Return with the response value */
+}
+
+
+
+/*--------------------------------------------------------------------------
+
+ Public Functions
+
+---------------------------------------------------------------------------*/
+
+
+/*-----------------------------------------------------------------------*/
+/* Initialize Disk Drive */
+/*-----------------------------------------------------------------------*/
+
+DSTATUS disk_initialize (
+ BYTE drv /* Physical drive nmuber (0) */
+)
+{
+ BYTE n, cmd, ty, ocr[4];
+
+ // Init SSP (clock low between frames, transition on leading edge)
+ sspInit(0, sspClockPolarity_Low, sspClockPhase_RisingEdge);
+
+ gpioSetDir( SSP0_CSPORT, SSP0_CSPIN, gpioDirection_Output ); /* CS */
+ gpioSetDir( CFG_SDCARD_CDPORT, CFG_SDCARD_CDPIN, gpioDirection_Input ); /* Card Detect */
+ gpioSetPullup (&IOCON_PIO3_0, gpioPullupMode_Inactive);
+
+ // Wait 20ms for card detect to stabilise
+ systickDelay(20);
+
+ if (drv) return STA_NOINIT; /* Supports only single drive */
+ if (Stat & STA_NODISK) return Stat; /* No card in the socket */
+
+ power_on(); /* Force socket power on */
+ FCLK_SLOW();
+ for (n = 100; n; n--) rcvr_spi(); /* 80 dummy clocks */
+
+ ty = 0;
+ if (send_cmd(CMD0, 0) == 1) { /* Enter Idle state */
+ Timer1 = 100; /* Initialization timeout of 1000 msec */
+ if (send_cmd(CMD8, 0x1AA) == 1) { /* SDHC */
+ for (n = 0; n < 4; n++) ocr[n] = rcvr_spi(); /* Get trailing return value of R7 resp */
+ if (ocr[2] == 0x01 && ocr[3] == 0xAA) { /* The card can work at vdd range of 2.7-3.6V */
+ while (Timer1 && send_cmd(ACMD41, 1UL << 30)); /* Wait for leaving idle state (ACMD41 with HCS bit) */
+ if (Timer1 && send_cmd(CMD58, 0) == 0) { /* Check CCS bit in the OCR */
+ for (n = 0; n < 4; n++) ocr[n] = rcvr_spi();
+ ty = (ocr[0] & 0x40) ? CT_SD2 | CT_BLOCK : CT_SD2; /* SDv2 */
+ }
+ }
+ } else { /* SDSC or MMC */
+ if (send_cmd(ACMD41, 0) <= 1) {
+ ty = CT_SD1; cmd = ACMD41; /* SDv1 */
+ } else {
+ ty = CT_MMC; cmd = CMD1; /* MMCv3 */
+ }
+ while (Timer1 && send_cmd(cmd, 0)); /* Wait for leaving idle state */
+ if (!Timer1 || send_cmd(CMD16, 512) != 0) /* Set R/W block length to 512 */
+ ty = 0;
+ }
+ }
+ CardType = ty;
+ deselect();
+
+ if (ty) { /* Initialization succeded */
+ Stat &= ~STA_NOINIT; /* Clear STA_NOINIT */
+ FCLK_FAST();
+ } else { /* Initialization failed */
+ power_off();
+ }
+
+ return Stat;
+}
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Get Disk Status */
+/*-----------------------------------------------------------------------*/
+
+DSTATUS disk_status (
+ BYTE drv /* Physical drive nmuber (0) */
+)
+{
+ if (drv) return STA_NOINIT; /* Supports only single drive */
+ return Stat;
+}
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Read Sector(s) */
+/*-----------------------------------------------------------------------*/
+
+DRESULT disk_read (
+ BYTE drv, /* Physical drive nmuber (0) */
+ BYTE *buff, /* Pointer to the data buffer to store read data */
+ DWORD sector, /* Start sector number (LBA) */
+ BYTE count /* Sector count (1..255) */
+)
+{
+ if (drv || !count) return RES_PARERR;
+ if (Stat & STA_NOINIT) return RES_NOTRDY;
+
+ if (!(CardType & CT_BLOCK)) sector *= 512; /* Convert to byte address if needed */
+
+ if (count == 1) { /* Single block read */
+ if ((send_cmd(CMD17, sector) == 0) /* READ_SINGLE_BLOCK */
+ && rcvr_datablock(buff, 512))
+ count = 0;
+ }
+ else { /* Multiple block read */
+ if (send_cmd(CMD18, sector) == 0) { /* READ_MULTIPLE_BLOCK */
+ do {
+ if (!rcvr_datablock(buff, 512)) break;
+ buff += 512;
+ } while (--count);
+ send_cmd(CMD12, 0); /* STOP_TRANSMISSION */
+ }
+ }
+ deselect();
+
+ return count ? RES_ERROR : RES_OK;
+}
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Write Sector(s) */
+/*-----------------------------------------------------------------------*/
+
+#if _READONLY == 0
+DRESULT disk_write (
+ BYTE drv, /* Physical drive nmuber (0) */
+ const BYTE *buff, /* Pointer to the data to be written */
+ DWORD sector, /* Start sector number (LBA) */
+ BYTE count /* Sector count (1..255) */
+)
+{
+ if (drv || !count) return RES_PARERR;
+ if (Stat & STA_NOINIT) return RES_NOTRDY;
+ if (Stat & STA_PROTECT) return RES_WRPRT;
+
+ if (!(CardType & CT_BLOCK)) sector *= 512; /* Convert to byte address if needed */
+
+ if (count == 1) { /* Single block write */
+ if ((send_cmd(CMD24, sector) == 0) /* WRITE_BLOCK */
+ && xmit_datablock(buff, 0xFE))
+ count = 0;
+ }
+ else { /* Multiple block write */
+ if (CardType & CT_SDC) send_cmd(ACMD23, count);
+ if (send_cmd(CMD25, sector) == 0) { /* WRITE_MULTIPLE_BLOCK */
+ do {
+ if (!xmit_datablock(buff, 0xFC)) break;
+ buff += 512;
+ } while (--count);
+ if (!xmit_datablock(0, 0xFD)) /* STOP_TRAN token */
+ count = 1;
+ }
+ }
+ deselect();
+
+ return count ? RES_ERROR : RES_OK;
+}
+#endif /* _READONLY == 0 */
+
+
+
+/*-----------------------------------------------------------------------*/
+/* Miscellaneous Functions */
+/*-----------------------------------------------------------------------*/
+
+#if _USE_IOCTL != 0
+DRESULT disk_ioctl (
+ BYTE drv, /* Physical drive nmuber (0) */
+ BYTE ctrl, /* Control code */
+ void *buff /* Buffer to send/receive control data */
+)
+{
+ DRESULT res;
+ BYTE n, csd[16], *ptr = buff;
+ WORD csize;
+
+
+ if (drv) return RES_PARERR;
+
+ res = RES_ERROR;
+
+ if (ctrl == CTRL_POWER) {
+ switch (*ptr) {
+ case 0: /* Sub control code == 0 (POWER_OFF) */
+ if (chk_power())
+ power_off(); /* Power off */
+ res = RES_OK;
+ break;
+ case 1: /* Sub control code == 1 (POWER_ON) */
+ power_on(); /* Power on */
+ res = RES_OK;
+ break;
+ case 2: /* Sub control code == 2 (POWER_GET) */
+ *(ptr+1) = (BYTE)chk_power();
+ res = RES_OK;
+ break;
+ default :
+ res = RES_PARERR;
+ }
+ }
+ else {
+ if (Stat & STA_NOINIT) return RES_NOTRDY;
+
+ switch (ctrl) {
+ case CTRL_SYNC : /* Make sure that no pending write process. Do not remove this or written sector might not left updated. */
+ if (select()) {
+ res = RES_OK;
+ deselect();
+ }
+ break;
+
+ case GET_SECTOR_COUNT : /* Get number of sectors on the disk (DWORD) */
+ if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) {
+ if ((csd[0] >> 6) == 1) { /* SDC ver 2.00 */
+ csize = csd[9] + ((WORD)csd[8] << 8) + 1;
+ *(DWORD*)buff = (DWORD)csize << 10;
+ } else { /* SDC ver 1.XX or MMC*/
+ n = (csd[5] & 15) + ((csd[10] & 128) >> 7) + ((csd[9] & 3) << 1) + 2;
+ csize = (csd[8] >> 6) + ((WORD)csd[7] << 2) + ((WORD)(csd[6] & 3) << 10) + 1;
+ *(DWORD*)buff = (DWORD)csize << (n - 9);
+ }
+ res = RES_OK;
+ }
+ break;
+
+ case GET_SECTOR_SIZE : /* Get R/W sector size (WORD) */
+ *(WORD*)buff = 512;
+ res = RES_OK;
+ break;
+
+ case GET_BLOCK_SIZE : /* Get erase block size in unit of sector (DWORD) */
+ if (CardType & CT_SD2) { /* SDC ver 2.00 */
+ if (send_cmd(ACMD13, 0) == 0) { /* Read SD status */
+ rcvr_spi();
+ if (rcvr_datablock(csd, 16)) { /* Read partial block */
+ for (n = 64 - 16; n; n--) rcvr_spi(); /* Purge trailing data */
+ *(DWORD*)buff = 16UL << (csd[10] >> 4);
+ res = RES_OK;
+ }
+ }
+ } else { /* SDC ver 1.XX or MMC */
+ if ((send_cmd(CMD9, 0) == 0) && rcvr_datablock(csd, 16)) { /* Read CSD */
+ if (CardType & CT_SD1) { /* SDC ver 1.XX */
+ *(DWORD*)buff = (((csd[10] & 63) << 1) + ((WORD)(csd[11] & 128) >> 7) + 1) << ((csd[13] >> 6) - 1);
+ } else { /* MMC */
+ *(DWORD*)buff = ((WORD)((csd[10] & 124) >> 2) + 1) * (((csd[11] & 3) << 3) + ((csd[11] & 224) >> 5) + 1);
+ }
+ res = RES_OK;
+ }
+ }
+ break;
+
+ case MMC_GET_TYPE : /* Get card type flags (1 byte) */
+ *ptr = CardType;
+ res = RES_OK;
+ break;
+
+ case MMC_GET_CSD : /* Receive CSD as a data block (16 bytes) */
+ if (send_cmd(CMD9, 0) == 0 /* READ_CSD */
+ && rcvr_datablock(ptr, 16))
+ res = RES_OK;
+ break;
+
+ case MMC_GET_CID : /* Receive CID as a data block (16 bytes) */
+ if (send_cmd(CMD10, 0) == 0 /* READ_CID */
+ && rcvr_datablock(ptr, 16))
+ res = RES_OK;
+ break;
+
+ case MMC_GET_OCR : /* Receive OCR as an R3 resp (4 bytes) */
+ if (send_cmd(CMD58, 0) == 0) { /* READ_OCR */
+ for (n = 4; n; n--) *ptr++ = rcvr_spi();
+ res = RES_OK;
+ }
+ break;
+
+ case MMC_GET_SDSTAT : /* Receive SD statsu as a data block (64 bytes) */
+ if (send_cmd(ACMD13, 0) == 0) { /* SD_STATUS */
+ rcvr_spi();
+ if (rcvr_datablock(ptr, 64))
+ res = RES_OK;
+ }
+ break;
+
+ default:
+ res = RES_PARERR;
+ }
+
+ deselect();
+ }
+
+ return res;
+}
+#endif /* _USE_IOCTL != 0 */
+
+
+/*-----------------------------------------------------------------------*/
+/* Device Timer Interrupt Procedure (Platform dependent) */
+/*-----------------------------------------------------------------------*/
+/* This function must be called in period of 10ms */
+/* Called from SysTick_Handler in systick.c */
+
+void disk_timerproc (void)
+{
+ static BYTE pv;
+ BYTE n;
+ BYTE s;
+
+ n = Timer1; /* 100Hz decrement timer */
+ if (n) Timer1 = --n;
+ n = Timer2;
+ if (n) Timer2 = --n;
+
+ n = pv;
+ pv = 0;
+ /* Sample card detect pin */
+ pv = gpioGetValue(CFG_SDCARD_CDPORT, CFG_SDCARD_CDPIN);
+
+ /* Have contacts stabled? */
+ if (n == pv)
+ {
+ s = Stat;
+
+ /* write protect NOT supported */
+
+ /* check card detect */
+ if (!pv) /* (Socket empty) */
+ s |= (STA_NODISK | STA_NOINIT);
+ else /* (Card inserted) */
+ s &= ~STA_NODISK;
+
+ Stat = s;
+ }
+}
+
+
--- /dev/null
+Bitmap LCDs
+===========
+
+This folder contains drivers for 1-bit graphic LCDs (128x64 pixel ST7565, etc.)
+or text-only displays. They are placed in a seperate folder because the
+drawing routines are handled quite differently than the generic drawing code
+for 16-bit TFT LCDs.
+
+ST7565 Driver for 128x64 pixel I2C-based displays (available from
+ Adafruit Industries, for example).
+SSD1306 Driver for 128x64 pixel OLED displays (also available from
+ Adafruit Industries).
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ssd1306.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section DESCRIPTION
+
+ Driver for 128x64 OLED display based on the SSD1306 controller.
+
+ This driver is based on the SSD1306 Library from Limor Fried
+ (Adafruit Industries) at: https://github.com/adafruit/SSD1306
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "ssd1306.h"
+
+#include "core/gpio/gpio.h"
+#include "core/systick/systick.h"
+#include "drivers/lcd/smallfonts.h"
+
+void ssd1306SendByte(uint8_t byte);
+
+#define CMD(c) do { gpioSetValue( SSD1306_CS_PORT, SSD1306_CS_PIN, 1 ); \
+ gpioSetValue( SSD1306_DC_PORT, SSD1306_DC_PIN, 0 ); \
+ gpioSetValue( SSD1306_CS_PORT, SSD1306_CS_PIN, 0 ); \
+ ssd1306SendByte( c ); \
+ gpioSetValue( SSD1306_CS_PORT, SSD1306_CS_PIN, 1 ); \
+ } while (0);
+#define DATA(c) do { gpioSetValue( SSD1306_CS_PORT, SSD1306_CS_PIN, 1 ); \
+ gpioSetValue( SSD1306_DC_PORT, SSD1306_DC_PIN, 1 ); \
+ gpioSetValue( SSD1306_CS_PORT, SSD1306_CS_PIN, 0 ); \
+ ssd1306SendByte( c ); \
+ gpioSetValue( SSD1306_CS_PORT, SSD1306_CS_PIN, 1 ); \
+ } while (0);
+#define DELAY(mS) do { systickDelay( mS / CFG_SYSTICK_DELAY_IN_MS ); } while(0);
+
+uint8_t buffer[SSD1306_LCDWIDTH * SSD1306_LCDHEIGHT / 8];
+
+/**************************************************************************/
+/* Private Methods */
+/**************************************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Simulates an SPI write using GPIO
+
+ @param[in] byte
+ The byte to send
+*/
+/**************************************************************************/
+void ssd1306SendByte(uint8_t byte)
+{
+ int8_t i;
+
+ // Make sure clock pin starts high
+ gpioSetValue(SSD1306_SCLK_PORT, SSD1306_SCLK_PIN, 1);
+
+ // Write from MSB to LSB
+ for (i=7; i>=0; i--)
+ {
+ // Set clock pin low
+ gpioSetValue(SSD1306_SCLK_PORT, SSD1306_SCLK_PIN, 0);
+ // Set data pin high or low depending on the value of the current bit
+ gpioSetValue(SSD1306_SDAT_PORT, SSD1306_SDAT_PIN, byte & (1 << i) ? 1 : 0);
+ // Set clock pin high
+ gpioSetValue(SSD1306_SCLK_PORT, SSD1306_SCLK_PIN, 1);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a single graphic character using the supplied font
+*/
+/**************************************************************************/
+static void ssd1306DrawChar(uint16_t x, uint16_t y, uint8_t c, struct FONT_DEF font)
+{
+ uint8_t col, column[font.u8Width];
+
+ // Check if the requested character is available
+ if ((c >= font.u8FirstChar) && (c <= font.u8LastChar))
+ {
+ // Retrieve appropriate columns from font data
+ for (col = 0; col < font.u8Width; col++)
+ {
+ column[col] = font.au8FontTable[((c - 32) * font.u8Width) + col]; // Get first column of appropriate character
+ }
+ }
+ else
+ {
+ // Requested character is not available in this font ... send a space instead
+ for (col = 0; col < font.u8Width; col++)
+ {
+ column[col] = 0xFF; // Send solid space
+ }
+ }
+
+ // Render each column
+ uint16_t xoffset, yoffset;
+ for (xoffset = 0; xoffset < font.u8Width; xoffset++)
+ {
+ for (yoffset = 0; yoffset < (font.u8Height + 1); yoffset++)
+ {
+ uint8_t bit = 0x00;
+ bit = (column[xoffset] << (8 - (yoffset + 1))); // Shift current row bit left
+ bit = (bit >> 7); // Shift current row but right (results in 0x01 for black, and 0x00 for white)
+ if (bit)
+ {
+ ssd1306DrawPixel(x + xoffset, y + yoffset);
+ }
+ }
+ }
+}
+
+/**************************************************************************/
+/* Public Methods */
+/**************************************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Initialises the SSD1306 LCD display
+*/
+/**************************************************************************/
+void ssd1306Init(uint8_t vccstate)
+{
+ // Set all pins to output
+ gpioSetDir(SSD1306_SCLK_PORT, SSD1306_SCLK_PIN, gpioDirection_Output);
+ gpioSetDir(SSD1306_SDAT_PORT, SSD1306_SDAT_PIN, gpioDirection_Output);
+ gpioSetDir(SSD1306_DC_PORT, SSD1306_DC_PIN, gpioDirection_Output);
+ gpioSetDir(SSD1306_RST_PORT, SSD1306_RST_PIN, gpioDirection_Output);
+ gpioSetDir(SSD1306_CS_PORT, SSD1306_CS_PIN, gpioDirection_Output);
+
+ // Reset the LCD
+ gpioSetValue(SSD1306_RST_PORT, SSD1306_RST_PIN, 1);
+ DELAY(1);
+ gpioSetValue(SSD1306_RST_PORT, SSD1306_RST_PIN, 0);
+ DELAY(10);
+ gpioSetValue(SSD1306_RST_PORT, SSD1306_RST_PIN, 1);
+
+ // Initialisation sequence
+ CMD(SSD1306_DISPLAYOFF); // 0xAE
+ CMD(SSD1306_SETLOWCOLUMN | 0x0); // low col = 0
+ CMD(SSD1306_SETHIGHCOLUMN | 0x0); // hi col = 0
+ CMD(SSD1306_SETSTARTLINE | 0x0); // line #0
+ CMD(SSD1306_SETCONTRAST); // 0x81
+ if (vccstate == SSD1306_EXTERNALVCC)
+ { CMD(0x9F) }
+ else
+ { CMD(0xCF) }
+ CMD(0xa1); // setment remap 95 to 0 (?)
+ CMD(SSD1306_NORMALDISPLAY); // 0xA6
+ CMD(SSD1306_DISPLAYALLON_RESUME); // 0xA4
+ CMD(SSD1306_SETMULTIPLEX); // 0xA8
+ CMD(0x3F); // 0x3F 1/64 duty
+ CMD(SSD1306_SETDISPLAYOFFSET); // 0xD3
+ CMD(0x0); // no offset
+ CMD(SSD1306_SETDISPLAYCLOCKDIV); // 0xD5
+ CMD(0x80); // the suggested ratio 0x80
+ CMD(SSD1306_SETPRECHARGE); // 0xd9
+ if (vccstate == SSD1306_EXTERNALVCC)
+ { CMD(0x22) }
+ else
+ { CMD(0xF1) }
+ CMD(SSD1306_SETCOMPINS); // 0xDA
+ CMD(0x12); // disable COM left/right remap
+ CMD(SSD1306_SETVCOMDETECT); // 0xDB
+ CMD(0x40); // 0x20 is default?
+ CMD(SSD1306_MEMORYMODE); // 0x20
+ CMD(0x00); // 0x0 act like ks0108
+ CMD(SSD1306_SEGREMAP | 0x1);
+ CMD(SSD1306_COMSCANDEC);
+ CMD(SSD1306_CHARGEPUMP); //0x8D
+ if (vccstate == SSD1306_EXTERNALVCC)
+ { CMD(0x10) }
+ else
+ { CMD(0x14) }
+
+ // Enabled the OLED panel
+ CMD(SSD1306_DISPLAYON);
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a single pixel in image buffer
+
+ @param[in] x
+ The x position (0..127)
+ @param[in] y
+ The y position (0..63)
+*/
+/**************************************************************************/
+void ssd1306DrawPixel(uint8_t x, uint8_t y)
+{
+ if ((x >= SSD1306_LCDWIDTH) || (y >= SSD1306_LCDHEIGHT))
+ return;
+
+ buffer[x+ (y/8)*SSD1306_LCDWIDTH] |= (1 << y%8);
+}
+
+/**************************************************************************/
+/*!
+ @brief Clears a single pixel in image buffer
+
+ @param[in] x
+ The x position (0..127)
+ @param[in] y
+ The y position (0..63)
+*/
+/**************************************************************************/
+void ssd1306ClearPixel(uint8_t x, uint8_t y)
+{
+ if ((x >= SSD1306_LCDWIDTH) || (y >= SSD1306_LCDHEIGHT))
+ return;
+
+ buffer[x+ (y/8)*SSD1306_LCDWIDTH] &= ~(1 << y%8);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the value (1 or 0) of the specified pixel from the buffer
+
+ @param[in] x
+ The x position (0..127)
+ @param[in] y
+ The y position (0..63)
+
+ @return 1 if the pixel is enabled, 0 if disabled
+*/
+/**************************************************************************/
+uint8_t ssd1306GetPixel(uint8_t x, uint8_t y)
+{
+ if ((x >= SSD1306_LCDWIDTH) || (y >=SSD1306_LCDHEIGHT)) return 0;
+ return buffer[x+ (y/8)*SSD1306_LCDWIDTH] & (1 << y%8) ? 1 : 0;
+}
+
+/**************************************************************************/
+/*!
+ @brief Clears the screen
+*/
+/**************************************************************************/
+void ssd1306ClearScreen()
+{
+ memset(buffer, 0, 1024);
+}
+
+/**************************************************************************/
+/*!
+ @brief Renders the contents of the pixel buffer on the LCD
+*/
+/**************************************************************************/
+void ssd1306Refresh(void)
+{
+ CMD(SSD1306_SETLOWCOLUMN | 0x0); // low col = 0
+ CMD(SSD1306_SETHIGHCOLUMN | 0x0); // hi col = 0
+ CMD(SSD1306_SETSTARTLINE | 0x0); // line #0
+
+ uint16_t i;
+ for (i=0; i<1024; i++)
+ {
+ DATA(buffer[i]);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a string using the supplied font data.
+
+ @param[in] x
+ Starting x co-ordinate
+ @param[in] y
+ Starting y co-ordinate
+ @param[in] text
+ The string to render
+ @param[in] font
+ Pointer to the FONT_DEF to use when drawing the string
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/bitmap/ssd1306/ssd1306.h"
+ #include "drivers/lcd/smallfonts.h"
+
+ // Configure the pins and initialise the LCD screen
+ ssd1306Init();
+
+ // Render some text on the screen
+ ssd1306DrawString(1, 10, "5x8 System", Font_System5x8);
+ ssd1306DrawString(1, 20, "7x8 System", Font_System7x8);
+
+ // Refresh the screen to see the results
+ ssd1306Refresh();
+
+ @endcode
+*/
+/**************************************************************************/
+void ssd1306DrawString(uint16_t x, uint16_t y, char* text, struct FONT_DEF font)
+{
+ uint8_t l;
+ for (l = 0; l < strlen(text); l++)
+ {
+ ssd1306DrawChar(x + (l * (font.u8Width + 1)), y, text[l], font);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Shifts the contents of the frame buffer up the specified
+ number of pixels
+
+ @param[in] height
+ The number of pixels to shift the frame buffer up, leaving
+ a blank space at the bottom of the frame buffer x pixels
+ high
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/bitmap/ssd1306/ssd1306.h"
+ #include "drivers/lcd/smallfonts.h"
+
+ // Configure the pins and initialise the LCD screen
+ ssd1306Init();
+
+ // Enable the backlight
+ ssd1306BLEnable();
+
+ // Continually write some text, scrolling upward one line each time
+ while (1)
+ {
+ // Shift the buffer up 8 pixels (adjust for font-height)
+ ssd1306ShiftFrameBuffer(8);
+ // Render some text on the screen with different fonts
+ ssd1306DrawString(1, 56, "INSERT TEXT HERE", Font_System5x8);
+ // Refresh the screen to see the results
+ ssd1306Refresh();
+ // Wait a bit before writing the next line
+ systickDelay(1000);
+ }
+
+ @endcode
+*/
+/**************************************************************************/
+void ssd1306ShiftFrameBuffer( uint8_t height )
+{
+ if (height == 0) return;
+ if (height >= SSD1306_LCDHEIGHT)
+ {
+ // Clear the entire frame buffer
+ ssd1306ClearScreen();
+ return;
+ }
+
+ // This is horribly inefficient, but at least easy to understand
+ // In a production environment, this should be significantly optimised
+
+ uint8_t y, x;
+ for (y = 0; y < SSD1306_LCDHEIGHT; y++)
+ {
+ for (x = 0; x < SSD1306_LCDWIDTH; x++)
+ {
+ if ((SSD1306_LCDHEIGHT - 1) - y > height)
+ {
+ // Shift height from further ahead in the buffer
+ ssd1306GetPixel(x, y + height) ? ssd1306DrawPixel(x, y) : ssd1306ClearPixel(x, y);
+ }
+ else
+ {
+ // Clear the entire line
+ ssd1306ClearPixel(x, y);
+ }
+ }
+ }
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ssd1306.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __SSD1306_H__
+#define __SSD1306_H__
+
+#include "projectconfig.h"
+
+#include "drivers/lcd/smallfonts.h"
+
+// Pin Definitions
+#define SSD1306_DC_PORT (2) // Data/Command
+#define SSD1306_DC_PIN (1)
+#define SSD1306_RST_PORT (2) // Reset
+#define SSD1306_RST_PIN (2)
+#define SSD1306_CS_PORT (2) // Select
+#define SSD1306_CS_PIN (3)
+#define SSD1306_SCLK_PORT (2) // Serial Clock
+#define SSD1306_SCLK_PIN (5)
+#define SSD1306_SDAT_PORT (2) // Serial Data
+#define SSD1306_SDAT_PIN (6)
+
+#define SSD1306_LCDWIDTH 128
+#define SSD1306_LCDHEIGHT 64
+
+// Commands
+#define SSD1306_SETCONTRAST 0x81
+#define SSD1306_DISPLAYALLON_RESUME 0xA4
+#define SSD1306_DISPLAYALLON 0xA5
+#define SSD1306_NORMALDISPLAY 0xA6
+#define SSD1306_INVERTDISPLAY 0xA7
+#define SSD1306_DISPLAYOFF 0xAE
+#define SSD1306_DISPLAYON 0xAF
+#define SSD1306_SETDISPLAYOFFSET 0xD3
+#define SSD1306_SETCOMPINS 0xDA
+#define SSD1306_SETVCOMDETECT 0xDB
+#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
+#define SSD1306_SETPRECHARGE 0xD9
+#define SSD1306_SETMULTIPLEX 0xA8
+#define SSD1306_SETLOWCOLUMN 0x00
+#define SSD1306_SETHIGHCOLUMN 0x10
+#define SSD1306_SETSTARTLINE 0x40
+#define SSD1306_MEMORYMODE 0x20
+#define SSD1306_COMSCANINC 0xC0
+#define SSD1306_COMSCANDEC 0xC8
+#define SSD1306_SEGREMAP 0xA0
+#define SSD1306_CHARGEPUMP 0x8D
+#define SSD1306_EXTERNALVCC 0x1
+#define SSD1306_SWITCHCAPVCC 0x2
+
+// Initialisation/Config Prototypes
+void ssd1306Init ( uint8_t vccstate );
+void ssd1306DrawPixel ( uint8_t x, uint8_t y );
+void ssd1306ClearPixel ( uint8_t x, uint8_t y );
+uint8_t ssd1306GetPixel ( uint8_t x, uint8_t y );
+void ssd1306ClearScreen ( void );
+void ssd1306Refresh ( void );
+void ssd1306DrawString( uint16_t x, uint16_t y, char* text, struct FONT_DEF font );
+void ssd1306ShiftFrameBuffer( uint8_t height );
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ST7565.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section DESCRIPTION
+
+ Driver for 128x64 pixel display based on the ST7565 LCD controller.
+
+ This driver is based on the ST7565 Library from Limor Fried
+ (Adafruit Industries) at: http://github.com/adafruit/ST7565-LCD/
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "st7565.h"
+
+#include "core/gpio/gpio.h"
+#include "core/systick/systick.h"
+#include "drivers/lcd/smallfonts.h"
+
+void sendByte(uint8_t byte);
+
+#define CMD(c) do { gpioSetValue( ST7565_A0_PORT, ST7565_A0_PIN, 0 ); sendByte( c ); } while (0);
+#define DATA(d) do { gpioSetValue( ST7565_A0_PORT, ST7565_A0_PIN, 1 ); sendByte( d ); } while (0);
+#define DELAY(mS) do { systickDelay( mS / CFG_SYSTICK_DELAY_IN_MS ); } while(0);
+
+uint8_t buffer[128*64/8];
+
+/**************************************************************************/
+/* Private Methods */
+/**************************************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Renders the buffer contents
+
+ @param[in] buffer
+ Pointer to the buffer containing the raw pixel data
+*/
+/**************************************************************************/
+void writeBuffer(uint8_t *buffer)
+{
+ uint8_t c, p;
+ int pagemap[] = { 3, 2, 1, 0, 7, 6, 5, 4 };
+
+ for(p = 0; p < 8; p++)
+ {
+ CMD(ST7565_CMD_SET_PAGE | pagemap[p]);
+ CMD(ST7565_CMD_SET_COLUMN_LOWER | (0x0 & 0xf));
+ CMD(ST7565_CMD_SET_COLUMN_UPPER | ((0x0 >> 4) & 0xf));
+ CMD(ST7565_CMD_RMW);
+ DATA(0xff);
+
+ for(c = 0; c < 128; c++)
+ {
+ DATA(buffer[(128*p)+c]);
+ }
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Simulates an SPI write using GPIO
+
+ @param[in] byte
+ The byte to send
+*/
+/**************************************************************************/
+void sendByte(uint8_t byte)
+{
+ int8_t i;
+
+ // Note: This code can be optimised to avoid the branches by setting
+ // GPIO registers directly, but we'll leave it as is for the moment
+ // for simplicity sake
+
+ // Make sure clock pin starts high
+ gpioSetValue(ST7565_SCLK_PORT, ST7565_SCLK_PIN, 1);
+
+ // Write from MSB to LSB
+ for (i=7; i>=0; i--)
+ {
+ // Set clock pin low
+ gpioSetValue(ST7565_SCLK_PORT, ST7565_SCLK_PIN, 0);
+ // Set data pin high or low depending on the value of the current bit
+ gpioSetValue(ST7565_SDAT_PORT, ST7565_SDAT_PIN, byte & (1 << i) ? 1 : 0);
+ // Set clock pin high
+ gpioSetValue(ST7565_SCLK_PORT, ST7565_SCLK_PIN, 1);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a single graphic character using the supplied font
+*/
+/**************************************************************************/
+void drawChar(uint16_t x, uint16_t y, uint8_t c, struct FONT_DEF font)
+{
+ uint8_t col, column[font.u8Width];
+
+ // Check if the requested character is available
+ if ((c >= font.u8FirstChar) && (c <= font.u8LastChar))
+ {
+ // Retrieve appropriate columns from font data
+ for (col = 0; col < font.u8Width; col++)
+ {
+ column[col] = font.au8FontTable[((c - 32) * font.u8Width) + col]; // Get first column of appropriate character
+ }
+ }
+ else
+ {
+ // Requested character is not available in this font ... send a space instead
+ for (col = 0; col < font.u8Width; col++)
+ {
+ column[col] = 0xFF; // Send solid space
+ }
+ }
+
+ // Render each column
+ uint16_t xoffset, yoffset;
+ for (xoffset = 0; xoffset < font.u8Width; xoffset++)
+ {
+ for (yoffset = 0; yoffset < (font.u8Height + 1); yoffset++)
+ {
+ uint8_t bit = 0x00;
+ bit = (column[xoffset] << (8 - (yoffset + 1))); // Shift current row bit left
+ bit = (bit >> 7); // Shift current row but right (results in 0x01 for black, and 0x00 for white)
+ if (bit)
+ {
+ st7565DrawPixel(x + xoffset, y + yoffset);
+ }
+ }
+ }
+}
+
+/**************************************************************************/
+/* Public Methods */
+/**************************************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Initialises the ST7565 LCD display
+*/
+/**************************************************************************/
+void st7565Init(void)
+{
+ // Note: This can be optimised to set all pins to output and high
+ // in two commands by manipulating the registers directly (assuming
+ // that the pins are located in the same GPIO bank). The code is left
+ // as is for clarity sake in case the pins are not all located in the
+ // same bank.
+
+ // Set clock pin to output and high
+ gpioSetDir(ST7565_SCLK_PORT, ST7565_SCLK_PIN, 1);
+ gpioSetValue(ST7565_SCLK_PORT, ST7565_SCLK_PIN, 1);
+
+ // Set data pin to output and high
+ gpioSetDir(ST7565_SDAT_PORT, ST7565_SDAT_PIN, 1);
+ gpioSetValue(ST7565_SDAT_PORT, ST7565_SDAT_PIN, 1);
+
+ // Configure backlight pin to output and set high (off)
+ gpioSetDir(ST7565_BL_PORT, ST7565_BL_PIN, 1);
+ gpioSetValue(ST7565_BL_PORT, ST7565_BL_PIN, 1);
+
+ // Configure A0 pin to output and set high
+ gpioSetDir(ST7565_A0_PORT, ST7565_A0_PIN, 1);
+ gpioSetValue(ST7565_A0_PORT, ST7565_A0_PIN, 1);
+
+ // Configure Reset pin and set high
+ gpioSetDir(ST7565_RST_PORT, ST7565_RST_PIN, 1);
+ gpioSetValue(ST7565_RST_PORT, ST7565_RST_PIN, 1);
+
+ // Configure select pin and set high
+ gpioSetDir(ST7565_CS_PORT, ST7565_CS_PIN, 1);
+ gpioSetValue(ST7565_CS_PORT, ST7565_CS_PIN, 1);
+
+ // Reset
+ gpioSetValue(ST7565_CS_PORT, ST7565_CS_PIN, 0); // Set CS low
+ gpioSetValue(ST7565_RST_PORT, ST7565_RST_PIN, 0); // Set reset low
+ DELAY(500 / CFG_SYSTICK_DELAY_IN_MS); // Wait 500mS
+ gpioSetValue(ST7565_RST_PORT, ST7565_RST_PIN, 1); // Set reset high
+
+ // Configure Display
+ CMD(ST7565_CMD_SET_BIAS_7); // LCD Bias Select
+ CMD(ST7565_CMD_SET_ADC_NORMAL); // ADC Select
+ CMD(ST7565_CMD_SET_COM_NORMAL); // SHL Select
+ CMD(ST7565_CMD_SET_DISP_START_LINE); // Initial Display Line
+ CMD(ST7565_CMD_SET_POWER_CONTROL | 0x04); // Turn on voltage converter (VC=1, VR=0, VF=0)
+ DELAY(50 / CFG_SYSTICK_DELAY_IN_MS); // Wait 50mS
+ CMD(ST7565_CMD_SET_POWER_CONTROL | 0x06); // Turn on voltage regulator (VC=1, VR=1, VF=0)
+ DELAY(50 / CFG_SYSTICK_DELAY_IN_MS); // Wait 50mS
+ CMD(ST7565_CMD_SET_POWER_CONTROL | 0x07); // Turn on voltage follower
+ DELAY(10 / CFG_SYSTICK_DELAY_IN_MS); // Wait 10mS
+ CMD(ST7565_CMD_SET_RESISTOR_RATIO | 0x6); // Set LCD operating voltage
+
+ // Turn display on
+ CMD(ST7565_CMD_DISPLAY_ON);
+ CMD(ST7565_CMD_SET_ALLPTS_NORMAL);
+ st7565SetBrightness(0x18);
+}
+
+/**************************************************************************/
+/*!
+ @brief Enables or disables the backlight
+*/
+/**************************************************************************/
+void st7565Backlight(bool state)
+{
+ gpioSetValue( ST7565_BL_PORT, ST7565_BL_PIN, state ? 0 : 1 );
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the display brightness
+*/
+/**************************************************************************/
+void st7565SetBrightness(uint8_t val)
+{
+ CMD(ST7565_CMD_SET_VOLUME_FIRST);
+ CMD(ST7565_CMD_SET_VOLUME_SECOND | (val & 0x3f));
+}
+
+/**************************************************************************/
+/*!
+ @brief Clears the screen
+*/
+/**************************************************************************/
+void st7565ClearScreen(void)
+{
+ memset(&buffer, 0x00, 128*64/8);
+}
+
+/**************************************************************************/
+/*!
+ @brief Renders the contents of the pixel buffer on the LCD
+*/
+/**************************************************************************/
+void st7565Refresh(void)
+{
+ writeBuffer(buffer);
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a single pixel in image buffer
+
+ @param[in] x
+ The x position (0..127)
+ @param[in] y
+ The y position (0..63)
+*/
+/**************************************************************************/
+void st7565DrawPixel(uint8_t x, uint8_t y)
+{
+ if ((x >= 128) || (y >= 64))
+ return;
+
+ // x is which column
+ buffer[x+ (y/8)*128] |= (1 << (7-(y%8)));
+}
+
+/**************************************************************************/
+/*!
+ @brief Clears a single pixel in image buffer
+
+ @param[in] x
+ The x position (0..127)
+ @param[in] y
+ The y position (0..63)
+*/
+/**************************************************************************/
+void st7565ClearPixel(uint8_t x, uint8_t y)
+{
+ if ((x >= 128) || (y >= 64))
+ return;
+
+ // x is which column
+ buffer[x+ (y/8)*128] &= ~(1 << (7-(y%8)));
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the value (1 or 0) of the specified pixel from the buffer
+
+ @param[in] x
+ The x position (0..127)
+ @param[in] y
+ The y position (0..63)
+
+ @return 1 if the pixel is enabled, 0 if disabled
+*/
+/**************************************************************************/
+uint8_t st7565GetPixel(uint8_t x, uint8_t y)
+{
+ if ((x >= 128) || (y >= 64)) return 0;
+ return buffer[x+ (y/8)*128] & (1 << (7-(y%8)));
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a string using the supplied font data.
+
+ @param[in] x
+ Starting x co-ordinate
+ @param[in] y
+ Starting y co-ordinate
+ @param[in] text
+ The string to render
+ @param[in] font
+ Pointer to the FONT_DEF to use when drawing the string
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/bitmap/st7565/st7565.h"
+ #include "drivers/lcd/smallfonts.h"
+
+ // Configure the pins and initialise the LCD screen
+ st7565Init();
+
+ // Enable the backlight
+ st7565BLEnable();
+
+ // Render some text on the screen with different fonts
+ st7565DrawString(1, 1, "3X6 SYSTEM", Font_System3x6); // 3x6 is UPPER CASE only
+ st7565DrawString(1, 10, "5x8 System", Font_System5x8);
+ st7565DrawString(1, 20, "7x8 System", Font_System7x8);
+
+ // Refresh the screen to see the results
+ st7565Refresh();
+
+ @endcode
+*/
+/**************************************************************************/
+void st7565DrawString(uint16_t x, uint16_t y, char* text, struct FONT_DEF font)
+{
+ uint8_t l;
+ for (l = 0; l < strlen(text); l++)
+ {
+ drawChar(x + (l * (font.u8Width + 1)), y, text[l], font);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Shifts the contents of the frame buffer up the specified
+ number of pixels
+
+ @param[in] height
+ The number of pixels to shift the frame buffer up, leaving
+ a blank space at the bottom of the frame buffer x pixels
+ high
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/bitmap/st7565/st7565.h"
+ #include "drivers/lcd/smallfonts.h"
+
+ // Configure the pins and initialise the LCD screen
+ st7565Init();
+
+ // Enable the backlight
+ st7565BLEnable();
+
+ // Continually write some text, scrolling upward one line each time
+ while (1)
+ {
+ // Shift the buffer up 8 pixels (adjust for font-height)
+ st7565ShiftFrameBuffer(8);
+ // Render some text on the screen with different fonts
+ st7565DrawString(1, 56, "INSERT TEXT HERE", Font_System3x6); // 3x6 is UPPER CASE only
+ // Refresh the screen to see the results
+ st7565Refresh();
+ // Wait a bit before writing the next line
+ systickDelay(1000);
+ }
+
+ @endcode
+*/
+/**************************************************************************/
+void st7565ShiftFrameBuffer( uint8_t height )
+{
+ if (height == 0) return;
+ if (height >= 64)
+ {
+ // Clear the entire frame buffer
+ st7565ClearScreen();
+ return;
+ }
+
+ // This is horribly inefficient, but at least easy to understand
+ // In a production environment, this should be significantly optimised
+
+ uint8_t y, x;
+ for (y = 0; y < 64; y++)
+ {
+ for (x = 0; x < 128; x++)
+ {
+ if (63 - y > height)
+ {
+ // Shift height from further ahead in the buffer
+ st7565GetPixel(x, y + height) ? st7565DrawPixel(x, y) : st7565ClearPixel(x, y);
+ }
+ else
+ {
+ // Clear the entire line
+ st7565ClearPixel(x, y);
+ }
+ }
+ }
+}
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ST7565.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __ST7565_H__
+#define __ST7565_H__
+
+#include "projectconfig.h"
+
+#include "drivers/lcd/smallfonts.h"
+
+// Pin Definitions
+#define ST7565_A0_PORT (2) // Register Select Pin (A0)
+#define ST7565_A0_PIN (1)
+#define ST7565_RST_PORT (2) // Reset
+#define ST7565_RST_PIN (2)
+#define ST7565_CS_PORT (2) // Select
+#define ST7565_CS_PIN (3)
+#define ST7565_BL_PORT (2) // Backlight
+#define ST7565_BL_PIN (4)
+#define ST7565_SCLK_PORT (2) // Serial Clock
+#define ST7565_SCLK_PIN (5)
+#define ST7565_SDAT_PORT (2) // Serial Data
+#define ST7565_SDAT_PIN (6)
+
+// Commands
+#define ST7565_CMD_DISPLAY_OFF 0xAE
+#define ST7565_CMD_DISPLAY_ON 0xAF
+#define ST7565_CMD_SET_DISP_START_LINE 0x40
+#define ST7565_CMD_SET_PAGE 0xB0
+#define ST7565_CMD_SET_COLUMN_UPPER 0x10
+#define ST7565_CMD_SET_COLUMN_LOWER 0x00
+#define ST7565_CMD_SET_ADC_NORMAL 0xA0
+#define ST7565_CMD_SET_ADC_REVERSE 0xA1
+#define ST7565_CMD_SET_DISP_NORMAL 0xA6
+#define ST7565_CMD_SET_DISP_REVERSE 0xA7
+#define ST7565_CMD_SET_ALLPTS_NORMAL 0xA4
+#define ST7565_CMD_SET_ALLPTS_ON 0xA5
+#define ST7565_CMD_SET_BIAS_9 0xA2
+#define ST7565_CMD_SET_BIAS_7 0xA3
+#define ST7565_CMD_RMW 0xE0
+#define ST7565_CMD_RMW_CLEAR 0xEE
+#define ST7565_CMD_INTERNAL_RESET 0xE2
+#define ST7565_CMD_SET_COM_NORMAL 0xC0
+#define ST7565_CMD_SET_COM_REVERSE 0xC8
+#define ST7565_CMD_SET_POWER_CONTROL 0x28
+#define ST7565_CMD_SET_RESISTOR_RATIO 0x20
+#define ST7565_CMD_SET_VOLUME_FIRST 0x81
+#define ST7565_CMD_SET_VOLUME_SECOND 0
+#define ST7565_CMD_SET_STATIC_OFF 0xAC
+#define ST7565_CMD_SET_STATIC_ON 0xAD
+#define ST7565_CMD_SET_STATIC_REG 0x0
+#define ST7565_CMD_SET_BOOSTER_FIRST 0xF8
+#define ST7565_CMD_SET_BOOSTER_234 0
+#define ST7565_CMD_SET_BOOSTER_5 1
+#define ST7565_CMD_SET_BOOSTER_6 3
+#define ST7565_CMD_NOP 0xE3
+#define ST7565_CMD_TEST 0xF0
+
+// Initialisation/Config Prototypes
+void st7565Init( void );
+void st7565Command( uint8_t c );
+void st7565Data( uint8_t d );
+void st7565SetBrightness( uint8_t val );
+
+// Backlight Prototypes
+void st7565Backlight(bool state);
+
+// Drawing Prototypes
+void st7565ClearScreen( void );
+void st7565Refresh( void );
+void st7565DrawPixel( uint8_t x, uint8_t y );
+void st7565ClearPixel( uint8_t x, uint8_t y );
+uint8_t st7565GetPixel( uint8_t x, uint8_t y );
+void st7565DrawString( uint16_t x, uint16_t y, char* text, struct FONT_DEF font );
+void st7565ShiftFrameBuffer( uint8_t pixels );
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file icons16.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+/*
+ All icons have been converted from the GentleFace Toolbar Icon Set,
+ licensed under the Creative Commons Attribution-NonCommercial License.
+ for more information see: http://www.gentleface.com/free_icon_set.html
+*/
+
+// Each icon used will consume 32 bytes of flash memory
+
+#ifndef __ICONS16_H__
+#define __ICONS16_H__
+
+uint16_t icons16_alert[16] = { 0x0000, 0x0000, 0x0180, 0x03C0, 0x03C0, 0x0660, 0x0660, 0x0E70, 0x0E70, 0x1E78, 0x3E7C, 0x3FFC, 0x7E7E, 0x7E7E, 0xFFFF, 0x0000 };
+uint16_t icons16_alert_interior[16] = { 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0180, 0x0000, 0x0180, 0x0180, 0x0000, 0x0000 };
+uint16_t icons16_info[16] = { 0x0000, 0x07F0, 0x0FF8, 0x1FFC, 0x3F3E, 0x7F3F, 0x7FFF, 0x7F3F, 0x7F3F, 0x7F3F, 0x7F3F, 0x7F3F, 0x3F3E, 0x1FFC, 0x0FF8, 0x07F0 };
+uint16_t icons16_info_interior[16] = { 0x0000, 0x0000, 0x0000, 0x0000, 0x00C0, 0x00C0, 0x0000, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x00C0, 0x0000, 0x0000, 0x0000 };
+uint16_t icons16_failed[16] = { 0x0000, 0x07F0, 0x0FF8, 0x1FFC, 0x3FFE, 0x79CF, 0x788F, 0x7C1F, 0x7E3F, 0x7C1F, 0x788F, 0x79CF, 0x3FFE, 0x1FFC, 0x0FF8, 0x07F0 };
+uint16_t icons16_failed_interior[16] = { 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0630, 0x0770, 0x03E0, 0x01C0, 0x03E0, 0x0770, 0x0630, 0x0000, 0x0000, 0x0000, 0x0000 };
+uint16_t icons16_passed[16] = { 0x0000, 0x07F0, 0x0FF8, 0x1FFC, 0x3FFE, 0x7FEF, 0x7FC7, 0x7F8F, 0x731F, 0x783F, 0x7C7F, 0x7EFF, 0x3FFE, 0x1FFC, 0x0FF8, 0x07F0 };
+uint16_t icons16_passed_interior[16] = { 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0010, 0x0038, 0x0070, 0x0CE0, 0x07C0, 0x0380, 0x0100, 0x0000, 0x0000, 0x0000, 0x0000 };
+uint16_t icons16_pointer[16] = { 0x07C0, 0x1FF0, 0x3FF8, 0x3FF8, 0x7FFC, 0x7FFC, 0x7FFC, 0x7FFC, 0x7FFC, 0x7FFC, 0x3FF8, 0x1FF0, 0x0FE0, 0x07C0, 0x0380, 0x0100 };
+uint16_t icons16_pointer_dot[16] = { 0x0000, 0x0000, 0x0000, 0x0000, 0x0380, 0x07C0, 0x07C0, 0x07C0, 0x0380, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 };
+uint16_t icons16_tag[16] = { 0xFF00, 0xFF80, 0xCFC0, 0xCFE0, 0xFFF0, 0xFFF8, 0xFFFC, 0xFFFE, 0x7FFE, 0x3FFE, 0x1FFC, 0x0FF8, 0x07F0, 0x03E0, 0x01C0, 0x0000 };
+uint16_t icons16_tag_dot[16] = { 0x0000, 0x0000, 0x3000, 0x3000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000 };
+uint16_t icons16_tools[16] = { 0x118C, 0x118C, 0x11FC, 0x11FC, 0x10F8, 0x1070, 0x1070, 0x3870, 0x1070, 0x3870, 0x3870, 0x3870, 0x3870, 0x3870, 0x3870, 0x3870 };
+
+#endif
--- /dev/null
+/* Partially based on original code for the KS0108 by Stephane Rey */
+
+/**************************************************************************/
+/*!
+ @file smallfonts.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "sysdefs.h"
+#include "smallfonts.h"
+
+/* Global variables */
+const struct FONT_DEF Font_System3x6 = {3, 6, 32, 96, au8FontSystem3x6};
+const struct FONT_DEF Font_System5x8 = {5, 8, 32, 128, au8FontSystem5x8};
+const struct FONT_DEF Font_System7x8 = {7, 8, 32, 128, au8FontSystem7x8};
+const struct FONT_DEF Font_8x8 = {8, 8, 32, 128, au8Font8x8};
+const struct FONT_DEF Font_8x8Thin = {8, 8, 32, 128, au8Font8x8Thin};
+
+/* System 3x6 - UPPER CASE ONLY */
+const uint8_t au8FontSystem3x6[]= {
+ 0x00,0x00,0x00, /* Space */
+ 0x00,0x5C,0x00, /* ! */
+ 0x0C,0x00,0x0C, /* " */
+ 0x7C,0x28,0x7C, /* # */
+ 0x7C,0x44,0x7C, /* 0x */
+ 0x24,0x10,0x48, /* % */
+ 0x28,0x54,0x08, /* & */
+ 0x00,0x0C,0x00, /* ' */
+ 0x38,0x44,0x00, /* ( */
+ 0x44,0x38,0x00, /* ) */
+ 0x20,0x10,0x08, /* // */
+ 0x10,0x38,0x10, /* + */
+ 0x80,0x40,0x00, /* , */
+ 0x10,0x10,0x10, /* - */
+ 0x00,0x40,0x00, /* . */
+ 0x20,0x10,0x08, /* / */
+ 0x38,0x44,0x38, /* 0 */
+ 0x00,0x7C,0x00, /* 1 */
+ 0x64,0x54,0x48, /* 2 */
+ 0x44,0x54,0x28, /* 3 */
+ 0x1C,0x10,0x7C, /* 4 */
+ 0x4C,0x54,0x24, /* 5 */
+ 0x38,0x54,0x20, /* 6 */
+ 0x04,0x74,0x0C, /* 7 */
+ 0x28,0x54,0x28, /* 8 */
+ 0x08,0x54,0x38, /* 9 */
+ 0x00,0x50,0x00, /* : */
+ 0x80,0x50,0x00, /* ; */
+ 0x10,0x28,0x44, /* < */
+ 0x28,0x28,0x28, /* = */
+ 0x44,0x28,0x10, /* > */
+ 0x04,0x54,0x08, /* ? */
+ 0x38,0x4C,0x5C, /* @ */
+ 0x78,0x14,0x78, /* A */
+ 0x7C,0x54,0x28, /* B */
+ 0x38,0x44,0x44, /* C */
+ 0x7C,0x44,0x38, /* D */
+ 0x7C,0x54,0x44, /* E */
+ 0x7C,0x14,0x04, /* F */
+ 0x38,0x44,0x34, /* G */
+ 0x7C,0x10,0x7C, /* H */
+ 0x00,0x7C,0x00, /* I */
+ 0x20,0x40,0x3C, /* J */
+ 0x7C,0x10,0x6C, /* K */
+ 0x7C,0x40,0x40, /* L */
+ 0x7C,0x08,0x7C, /* M */
+ 0x7C,0x04,0x7C, /* N */
+ 0x7C,0x44,0x7C, /* O */
+ 0x7C,0x14,0x08, /* P */
+ 0x38,0x44,0x78, /* Q */
+ 0x7C,0x14,0x68, /* R */
+ 0x48,0x54,0x24, /* S */
+ 0x04,0x7C,0x04, /* T */
+ 0x7C,0x40,0x7C, /* U */
+ 0x3C,0x40,0x3C, /* V */
+ 0x7C,0x20,0x7C, /* W */
+ 0x6C,0x10,0x6C, /* X */
+ 0x1C,0x60,0x1C, /* Y */
+ 0x64,0x54,0x4C, /* Z */
+ 0x7C,0x44,0x00, /* [ */
+ 0x08,0x10,0x20, /* \ */
+ 0x44,0x7C,0x00, /* ] */
+ 0x08,0x04,0x08, /* ^ */
+ 0x80,0x80,0x80, /* _ */
+ 0x04,0x08,0x00 /* ` */
+};
+
+/* System 5x8 */
+const uint8_t au8FontSystem5x8[]=
+{
+ 0x00,0x00,0x00,0x00,0x00, /* Space */
+ 0x00,0x00,0x4f,0x00,0x00, /* ! */
+ 0x00,0x07,0x00,0x07,0x00, /* " */
+ 0x14,0x7f,0x14,0x7f,0x14, /* # */
+ 0x24,0x2a,0x7f,0x2a,0x12, /* 0x */
+ 0x23,0x13,0x08,0x64,0x62, /* % */
+ 0x36,0x49,0x55,0x22,0x20, /* & */
+ 0x00,0x05,0x03,0x00,0x00, /* ' */
+ 0x00,0x1c,0x22,0x41,0x00, /* ( */
+ 0x00,0x41,0x22,0x1c,0x00, /* ) */
+ 0x14,0x08,0x3e,0x08,0x14, /* // */
+ 0x08,0x08,0x3e,0x08,0x08, /* + */
+ 0x50,0x30,0x00,0x00,0x00, /* , */
+ 0x08,0x08,0x08,0x08,0x08, /* - */
+ 0x00,0x60,0x60,0x00,0x00, /* . */
+ 0x20,0x10,0x08,0x04,0x02, /* / */
+ 0x3e,0x51,0x49,0x45,0x3e, /* 0 */
+ 0x00,0x42,0x7f,0x40,0x00, /* 1 */
+ 0x42,0x61,0x51,0x49,0x46, /* 2 */
+ 0x21,0x41,0x45,0x4b,0x31, /* 3 */
+ 0x18,0x14,0x12,0x7f,0x10, /* 4 */
+ 0x27,0x45,0x45,0x45,0x39, /* 5 */
+ 0x3c,0x4a,0x49,0x49,0x30, /* 6 */
+ 0x01,0x71,0x09,0x05,0x03, /* 7 */
+ 0x36,0x49,0x49,0x49,0x36, /* 8 */
+ 0x06,0x49,0x49,0x29,0x1e, /* 9 */
+ 0x00,0x36,0x36,0x00,0x00, /* : */
+ 0x00,0x56,0x36,0x00,0x00, /* ; */
+ 0x08,0x14,0x22,0x41,0x00, /* < */
+ 0x14,0x14,0x14,0x14,0x14, /* = */
+ 0x00,0x41,0x22,0x14,0x08, /* > */
+ 0x02,0x01,0x51,0x09,0x06, /* ? */
+ 0x3e,0x41,0x5d,0x55,0x1e, /* @ */
+ 0x7e,0x11,0x11,0x11,0x7e, /* A */
+ 0x7f,0x49,0x49,0x49,0x36, /* B */
+ 0x3e,0x41,0x41,0x41,0x22, /* C */
+ 0x7f,0x41,0x41,0x22,0x1c, /* D */
+ 0x7f,0x49,0x49,0x49,0x41, /* E */
+ 0x7f,0x09,0x09,0x09,0x01, /* F */
+ 0x3e,0x41,0x49,0x49,0x7a, /* G */
+ 0x7f,0x08,0x08,0x08,0x7f, /* H */
+ 0x00,0x41,0x7f,0x41,0x00, /* I */
+ 0x20,0x40,0x41,0x3f,0x01, /* J */
+ 0x7f,0x08,0x14,0x22,0x41, /* K */
+ 0x7f,0x40,0x40,0x40,0x40, /* L */
+ 0x7f,0x02,0x0c,0x02,0x7f, /* M */
+ 0x7f,0x04,0x08,0x10,0x7f, /* N */
+ 0x3e,0x41,0x41,0x41,0x3e, /* O */
+ 0x7f,0x09,0x09,0x09,0x06, /* P */
+ 0x3e,0x41,0x51,0x21,0x5e, /* Q */
+ 0x7f,0x09,0x19,0x29,0x46, /* R */
+ 0x26,0x49,0x49,0x49,0x32, /* S */
+ 0x01,0x01,0x7f,0x01,0x01, /* T */
+ 0x3f,0x40,0x40,0x40,0x3f, /* U */
+ 0x1f,0x20,0x40,0x20,0x1f, /* V */
+ 0x3f,0x40,0x38,0x40,0x3f, /* W */
+ 0x63,0x14,0x08,0x14,0x63, /* X */
+ 0x07,0x08,0x70,0x08,0x07, /* Y */
+ 0x61,0x51,0x49,0x45,0x43, /* Z */
+ 0x00,0x7f,0x41,0x41,0x00, /* [ */
+ 0x02,0x04,0x08,0x10,0x20, /* \ */
+ 0x00,0x41,0x41,0x7f,0x00, /* ] */
+ 0x04,0x02,0x01,0x02,0x04, /* ^ */
+ 0x40,0x40,0x40,0x40,0x40, /* _ */
+ 0x00,0x00,0x03,0x05,0x00, /* ` */
+ 0x20,0x54,0x54,0x54,0x78, /* a */
+ 0x7F,0x44,0x44,0x44,0x38, /* b */
+ 0x38,0x44,0x44,0x44,0x44, /* c */
+ 0x38,0x44,0x44,0x44,0x7f, /* d */
+ 0x38,0x54,0x54,0x54,0x18, /* e */
+ 0x04,0x04,0x7e,0x05,0x05, /* f */
+ 0x08,0x54,0x54,0x54,0x3c, /* g */
+ 0x7f,0x08,0x04,0x04,0x78, /* h */
+ 0x00,0x44,0x7d,0x40,0x00, /* i */
+ 0x20,0x40,0x44,0x3d,0x00, /* j */
+ 0x7f,0x10,0x28,0x44,0x00, /* k */
+ 0x00,0x41,0x7f,0x40,0x00, /* l */
+ 0x7c,0x04,0x7c,0x04,0x78, /* m */
+ 0x7c,0x08,0x04,0x04,0x78, /* n */
+ 0x38,0x44,0x44,0x44,0x38, /* o */
+ 0x7c,0x14,0x14,0x14,0x08, /* p */
+ 0x08,0x14,0x14,0x14,0x7c, /* q */
+ 0x7c,0x08,0x04,0x04,0x00, /* r */
+ 0x48,0x54,0x54,0x54,0x24, /* s */
+ 0x04,0x04,0x3f,0x44,0x44, /* t */
+ 0x3c,0x40,0x40,0x20,0x7c, /* u */
+ 0x1c,0x20,0x40,0x20,0x1c, /* v */
+ 0x3c,0x40,0x30,0x40,0x3c, /* w */
+ 0x44,0x28,0x10,0x28,0x44, /* x */
+ 0x0c,0x50,0x50,0x50,0x3c, /* y */
+ 0x44,0x64,0x54,0x4c,0x44, /* z */
+ 0x08,0x36,0x41,0x41,0x00, /* { */
+ 0x00,0x00,0x77,0x00,0x00, /* | */
+ 0x00,0x41,0x41,0x36,0x08, /* } */
+ 0x08,0x08,0x2a,0x1c,0x08, /* <- */
+ 0x08,0x1c,0x2a,0x08,0x08, /* -> */
+ 0xff,0xff,0xff,0xff,0xff, /* \7f */
+};
+
+/* System 7x8 */
+const uint8_t au8FontSystem7x8[]=
+{
+ 0, 0, 0, 0, 0, 0, 0, //' '
+ 0, 6, 95, 95, 6, 0, 0, //'!'
+ 0, 7, 7, 0, 7, 7, 0, //'"'
+ 20, 127, 127, 20, 127, 127, 20, //'#'
+ 36, 46, 107, 107, 58, 18, 0, //'$'
+ 70, 102, 48, 24, 12, 102, 98, //'%'
+ 48, 122, 79, 93, 55, 122, 72, //'&'
+ 4, 7, 3, 0, 0, 0, 0, //'''
+ 0, 28, 62, 99, 65, 0, 0, //'('
+ 0, 65, 99, 62, 28, 0, 0, //')'
+ 8, 42, 62, 28, 28, 62, 42, //'*'
+ 8, 8, 62, 62, 8, 8, 0, //'+'
+ 0, 128, 224, 96, 0, 0, 0, //','
+ 8, 8, 8, 8, 8, 8, 0, //'-'
+ 0, 0, 96, 96, 0, 0, 0, //'.'
+ 96, 48, 24, 12, 6, 3, 1, //'/'
+ 62, 127, 113, 89, 77, 127, 62, //'0'
+ 64, 66, 127, 127, 64, 64, 0, //'1'
+ 98, 115, 89, 73, 111, 102, 0, //'2'
+ 34, 99, 73, 73, 127, 54, 0, //'3'
+ 24, 28, 22, 83, 127, 127, 80, //'4'
+ 39, 103, 69, 69, 125, 57, 0, //'5'
+ 60, 126, 75, 73, 121, 48, 0, //'6'
+ 3, 3, 113, 121, 15, 7, 0, //'7'
+ 54, 127, 73, 73, 127, 54, 0, //'8'
+ 6, 79, 73, 105, 63, 30, 0, //'9'
+ 0, 0, 102, 102, 0, 0, 0, //':'
+ 0, 128, 230, 102, 0, 0, 0, //';'
+ 8, 28, 54, 99, 65, 0, 0, //'<'
+ 36, 36, 36, 36, 36, 36, 0, //'='
+ 0, 65, 99, 54, 28, 8, 0, //'>'
+ 2, 3, 81, 89, 15, 6, 0, //'?'
+ 62, 127, 65, 93, 93, 31, 30, //'@'
+ 124,126, 19, 19, 126, 124, 0, //'A'
+ 65, 127, 127, 73, 73, 127, 54, //'B'
+ 28, 62, 99, 65, 65, 99, 34, //'C'
+ 65, 127, 127, 65, 99, 62, 28, //'D'
+ 65, 127, 127, 73, 93, 65, 99, //'E'
+ 65, 127, 127, 73, 29, 1, 3, //'F'
+ 28, 62, 99, 65, 81, 115, 114, //'G'
+ 127,127, 8, 8, 127, 127, 0, //'H'
+ 0, 65, 127, 127, 65, 0, 0, //'I'
+ 48, 112, 64, 65, 127, 63, 1, //'J'
+ 65, 127, 127, 8, 28, 119, 99, //'K'
+ 65, 127, 127, 65, 64, 96, 112, //'L'
+ 127,127, 14, 28, 14, 127, 127, //'M'
+ 127,127, 6, 12, 24, 127, 127, //'N'
+ 28, 62, 99, 65, 99, 62, 28, //'O'
+ 65, 127, 127, 73, 9, 15, 6, //'P'
+ 30, 63, 33, 113, 127, 94, 0, //'Q'
+ 65, 127, 127, 9, 25, 127, 102, //'R'
+ 38, 111, 77, 89, 115, 50, 0, //'S'
+ 3, 65, 127, 127, 65, 3, 0, //'T'
+ 127,127, 64, 64, 127, 127, 0, //'U'
+ 31, 63, 96, 96, 63, 31, 0, //'V'
+ 127,127, 48, 24, 48, 127, 127, //'W'
+ 67, 103, 60, 24, 60, 103, 67, //'X'
+ 7, 79, 120, 120, 79, 7, 0, //'Y'
+ 71, 99, 113, 89, 77, 103, 115, //'Z'
+ 0, 127, 127, 65, 65, 0, 0, //'['
+ 1, 3, 6, 12, 24, 48, 96, //'\'
+ 0, 65, 65, 127, 127, 0, 0, //']'
+ 8, 12, 6, 3, 6, 12, 8, //'^'
+ 128,128, 128, 128, 128, 128, 128, //'_'
+ 0, 0, 3, 7, 4, 0, 0, //'`'
+ 32, 116, 84, 84, 60, 120, 64, //'a'
+ 65, 127, 63, 72, 72, 120, 48, //'b'
+ 56, 124, 68, 68, 108, 40, 0, //'c'
+ 48, 120, 72, 73, 63, 127, 64, //'d'
+ 56, 124, 84, 84, 92, 24, 0, //'e'
+ 72, 126, 127, 73, 3, 2, 0, //'f'
+ 56, 188, 164, 164, 252, 120, 0, //'g'
+ 65, 127, 127, 8, 4, 124, 120, //'h'
+ 0, 68, 125, 125, 64, 0, 0, //'i'
+ 96, 224, 128, 128, 253, 125, 0, //'j'
+ 65, 127, 127, 16, 56, 108, 68, //'k'
+ 0, 65, 127, 127, 64, 0, 0, //'l'
+ 120,124, 28, 56, 28, 124, 120, //'m'
+ 124,124, 4, 4, 124, 120, 0, //'n'
+ 56, 124, 68, 68, 124, 56, 0, //'o'
+ 0, 252, 252, 164, 36, 60, 24, //'p'
+ 24, 60, 36, 164, 248, 252, 132, //'q'
+ 68, 124, 120, 76, 4, 28, 24, //'r'
+ 72, 92, 84, 84, 116, 36, 0, //'s'
+ 0, 4, 62, 127, 68, 36, 0, //'t'
+ 60, 124, 64, 64, 60, 124, 64, //'u'
+ 28, 60, 96, 96, 60, 28, 0, //'v'
+ 60, 124, 112, 56, 112, 124, 60, //'w'
+ 68, 108, 56, 16, 56, 108, 68, //'x'
+ 60, 188, 160, 160, 252, 124, 0, //'y'
+ 76, 100, 116, 92, 76, 100, 0, //'z'
+ 8, 8, 62, 119, 65, 65, 0, //'{'
+ 0, 0, 0, 119, 119, 0, 0, //'|'
+ 65, 65, 119, 62, 8, 8, 0, //'}'
+ 2, 3, 1, 3, 2, 3, 1, //'~'
+ 255,129, 129, 129, 129, 129, 255, //'\7f'
+ 14, 159, 145, 177, 251, 74, 0 //'Á'
+};
+
+/* 8x8 Normal */
+const uint8_t au8Font8x8[]= {
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ASCII - 32
+ 0x00,0x00,0x00,0x5F,0x5F,0x00,0x00,0x00, // ASCII - 33
+ 0x00,0x00,0x03,0x07,0x00,0x07,0x03,0x00, // ASCII - 34
+ 0x00,0x10,0x74,0x1C,0x77,0x1C,0x17,0x04, // ASCII - 35
+ 0x00,0x24,0x2E,0x2A,0x7F,0x2A,0x3A,0x10, // ASCII - 36
+ 0x00,0x4C,0x6A,0x76,0x1A,0x6A,0x56,0x33, // ASCII - 37
+ 0x00,0x30,0x7A,0x4F,0x5D,0x37,0x7A,0x48, // ASCII - 38
+ 0x00,0x00,0x04,0x07,0x03,0x00,0x00,0x00, // ASCII - 39
+ 0x00,0x00,0x00,0x1C,0x3E,0x63,0x41,0x00, // ASCII - 40
+ 0x00,0x00,0x41,0x63,0x3E,0x1C,0x00,0x00, // ASCII - 41
+ 0x00,0x08,0x2A,0x3E,0x1C,0x3E,0x2A,0x08, // ASCII - 42
+ 0x00,0x08,0x08,0x3E,0x3E,0x08,0x08,0x00, // ASCII - 43
+ 0x00,0x00,0x00,0x60,0x60,0x00,0x00,0x00, // ASCII - 44
+ 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, // ASCII - 45
+ 0x00,0x00,0x00,0x60,0x60,0x00,0x00,0x00, // ASCII - 46
+ 0x00,0x60,0x30,0x18,0x0C,0x06,0x03,0x01, // ASCII - 47
+ 0x00,0x1C,0x3E,0x61,0x43,0x3E,0x1C,0x00, // ASCII - 48
+ 0x00,0x00,0x44,0x7F,0x7F,0x40,0x00,0x00, // ASCII - 49
+ 0x00,0x46,0x67,0x71,0x59,0x4F,0x66,0x00, // ASCII - 50
+ 0x00,0x22,0x63,0x49,0x4D,0x7F,0x32,0x00, // ASCII - 51
+ 0x00,0x18,0x1C,0x52,0x7F,0x7F,0x50,0x00, // ASCII - 52
+ 0x00,0x2F,0x6F,0x45,0x45,0x7D,0x39,0x00, // ASCII - 53
+ 0x00,0x3C,0x7E,0x4B,0x49,0x79,0x30,0x00, // ASCII - 54
+ 0x00,0x07,0x43,0x71,0x7D,0x0F,0x03,0x00, // ASCII - 55
+ 0x00,0x36,0x7F,0x4D,0x59,0x7F,0x36,0x00, // ASCII - 56
+ 0x00,0x06,0x4F,0x49,0x69,0x3F,0x1E,0x00, // ASCII - 57
+ 0x00,0x00,0x00,0x66,0x66,0x00,0x00,0x00, // ASCII - 58
+ 0x00,0x00,0x00,0x66,0x66,0x00,0x00,0x00, // ASCII - 59
+ 0x00,0x00,0x08,0x1C,0x36,0x63,0x41,0x00, // ASCII - 60
+ 0x00,0x14,0x14,0x14,0x14,0x14,0x14,0x00, // ASCII - 61
+ 0x00,0x00,0x41,0x63,0x36,0x1C,0x08,0x00, // ASCII - 62
+ 0x00,0x02,0x07,0x51,0x59,0x0F,0x06,0x00, // ASCII - 63
+ 0x00,0x3E,0x41,0x5D,0x55,0x5D,0x51,0x1E, // ASCII - 64
+ 0x00,0x40,0x70,0x1D,0x17,0x1F,0x78,0x60, // ASCII - 65
+ 0x00,0x41,0x7F,0x7F,0x49,0x4F,0x7E,0x30, // ASCII - 66
+ 0x00,0x1C,0x3E,0x63,0x41,0x41,0x42,0x27, // ASCII - 67
+ 0x00,0x41,0x7F,0x7F,0x41,0x63,0x3E,0x1C, // ASCII - 68
+ 0x00,0x41,0x7F,0x7F,0x49,0x5D,0x41,0x63, // ASCII - 69
+ 0x00,0x41,0x7F,0x7F,0x49,0x1D,0x01,0x03, // ASCII - 70
+ 0x00,0x1C,0x3E,0x63,0x41,0x51,0x72,0x77, // ASCII - 71
+ 0x00,0x7F,0x7F,0x08,0x08,0x7F,0x7F,0x00, // ASCII - 72
+ 0x00,0x00,0x41,0x7F,0x7F,0x41,0x00,0x00, // ASCII - 73
+ 0x00,0x30,0x70,0x41,0x41,0x7F,0x3F,0x01, // ASCII - 74
+ 0x00,0x7F,0x7F,0x08,0x1C,0x77,0x63,0x41, // ASCII - 75
+ 0x00,0x41,0x7F,0x7F,0x41,0x40,0x60,0x70, // ASCII - 76
+ 0x00,0x7F,0x7E,0x0C,0x18,0x0C,0x7E,0x7F, // ASCII - 77
+ 0x00,0x7F,0x7E,0x0C,0x18,0x30,0x7F,0x7F, // ASCII - 78
+ 0x00,0x1C,0x3E,0x63,0x41,0x63,0x3E,0x1C, // ASCII - 79
+ 0x00,0x41,0x7F,0x7F,0x49,0x09,0x0F,0x06, // ASCII - 80
+ 0x00,0x1C,0x3E,0x63,0x51,0x63,0x3E,0x1C, // ASCII - 81
+ 0x00,0x7F,0x7F,0x09,0x19,0x7F,0x66,0x40, // ASCII - 82
+ 0x00,0x66,0x6F,0x4D,0x59,0x7B,0x33,0x00, // ASCII - 83
+ 0x00,0x03,0x41,0x7F,0x7F,0x41,0x03,0x00, // ASCII - 84
+ 0x00,0x3F,0x7F,0x40,0x40,0x40,0x7F,0x3F, // ASCII - 85
+ 0x00,0x03,0x0F,0x3D,0x70,0x1D,0x07,0x01, // ASCII - 86
+ 0x00,0x0F,0x7F,0x30,0x1C,0x30,0x7F,0x0F, // ASCII - 87
+ 0x00,0x63,0x77,0x1C,0x1C,0x77,0x63,0x00, // ASCII - 88
+ 0x01,0x03,0x47,0x7C,0x78,0x47,0x03,0x01, // ASCII - 89
+ 0x00,0x67,0x73,0x59,0x4D,0x67,0x73,0x00, // ASCII - 90
+ 0x00,0x00,0x00,0x7F,0x7F,0x41,0x41,0x00, // ASCII - 91
+ 0x00,0x01,0x03,0x06,0x0C,0x18,0x30,0x60, // ASCII - 92
+ 0x00,0x00,0x41,0x41,0x7F,0x7F,0x00,0x00, // ASCII - 93
+ 0x00,0x00,0x04,0x06,0x03,0x06,0x04,0x00, // ASCII - 94
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ASCII - 95
+ 0x00,0x00,0x01,0x03,0x06,0x04,0x00,0x00, // ASCII - 96
+ 0x00,0x68,0x6C,0x54,0x54,0x3C,0x78,0x40, // ASCII - 97
+ 0x00,0x41,0x7F,0x3F,0x6C,0x44,0x7C,0x38, // ASCII - 98
+ 0x00,0x38,0x7C,0x44,0x44,0x6C,0x2C,0x00, // ASCII - 99
+ 0x00,0x38,0x7C,0x44,0x49,0x3F,0x7F,0x40, // ASCII - 100
+ 0x00,0x38,0x7C,0x54,0x54,0x5C,0x58,0x00, // ASCII - 101
+ 0x00,0x00,0x48,0x7E,0x7F,0x49,0x0B,0x02, // ASCII - 102
+ 0x00,0x48,0x7C,0x34,0x34,0x2C,0x68,0x44, // ASCII - 103
+ 0x00,0x41,0x7F,0x7F,0x08,0x04,0x7C,0x78, // ASCII - 104
+ 0x00,0x00,0x44,0x7D,0x7D,0x40,0x00,0x00, // ASCII - 105
+ 0x00,0x60,0x60,0x04,0x7D,0x7D,0x00,0x00, // ASCII - 106
+ 0x00,0x41,0x7F,0x7F,0x10,0x78,0x6C,0x44, // ASCII - 107
+ 0x00,0x00,0x41,0x7F,0x7F,0x40,0x00,0x00, // ASCII - 108
+ 0x00,0x7C,0x7C,0x0C,0x78,0x0C,0x7C,0x78, // ASCII - 109
+ 0x00,0x44,0x7C,0x7C,0x08,0x04,0x7C,0x78, // ASCII - 110
+ 0x00,0x38,0x7C,0x44,0x44,0x7C,0x38,0x00, // ASCII - 111
+ 0x00,0x04,0x7C,0x78,0x24,0x24,0x3C,0x18, // ASCII - 112
+ 0x00,0x18,0x3C,0x24,0x24,0x78,0x7C,0x00, // ASCII - 113
+ 0x00,0x44,0x7C,0x78,0x4C,0x04,0x1C,0x18, // ASCII - 114
+ 0x00,0x48,0x5C,0x5C,0x74,0x74,0x24,0x00, // ASCII - 115
+ 0x00,0x00,0x04,0x3E,0x7F,0x44,0x24,0x00, // ASCII - 116
+ 0x00,0x3C,0x7C,0x40,0x40,0x3C,0x7C,0x40, // ASCII - 117
+ 0x00,0x04,0x1C,0x3C,0x60,0x30,0x1C,0x04, // ASCII - 118
+ 0x00,0x1C,0x7C,0x30,0x1C,0x30,0x7C,0x1C, // ASCII - 119
+ 0x00,0x44,0x6C,0x3C,0x10,0x78,0x6C,0x44, // ASCII - 120
+ 0x00,0x44,0x4C,0x1C,0x70,0x64,0x1C,0x0C, // ASCII - 121
+ 0x00,0x4C,0x64,0x74,0x5C,0x4C,0x64,0x00, // ASCII - 122
+ 0x00,0x08,0x08,0x3E,0x77,0x41,0x41,0x00, // ASCII - 123
+ 0x00,0x00,0x00,0x7F,0x7F,0x00,0x00,0x00, // ASCII - 124
+ 0x00,0x41,0x41,0x77,0x3E,0x08,0x08,0x00, // ASCII - 125
+ 0x00,0x02,0x01,0x01,0x03,0x02,0x02,0x01, // ASCII - 126
+ 0x00,0x60,0x78,0x4E,0x47,0x5E,0x78,0x60, // ASCII - 127
+ 0x00,0x1C,0x3E,0x23,0x41,0x41,0x42,0x27, // ASCII - 128
+ 0x00,0x3D,0x7D,0x40,0x41,0x3D,0x7C,0x40, // ASCII - 129
+};
+
+/* 8x8 Thin */
+const uint8_t au8Font8x8Thin[]= {
+ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x00,0x5F,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x07,0x00,0x00,0x07,0x00,0x00,
+ 0x00,0x14,0x7F,0x14,0x14,0x7F,0x14,0x00,
+ 0x00,0x24,0x2A,0x6B,0x6B,0x2A,0x12,0x00,
+ 0x00,0x46,0x26,0x10,0x08,0x64,0x62,0x00,
+ 0x30,0x4A,0x45,0x4D,0x32,0x48,0x48,0x00,
+ 0x00,0x00,0x04,0x03,0x00,0x00,0x00,0x00,
+ 0x00,0x1C,0x22,0x41,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x41,0x22,0x1C,0x00,0x00,0x00,
+ 0x08,0x2A,0x1C,0x1C,0x1C,0x2A,0x08,0x00,
+ 0x00,0x08,0x08,0x3E,0x08,0x08,0x00,0x00,
+ 0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,
+ 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00,
+ 0x00,0x00,0x00,0x60,0x00,0x00,0x00,0x00,
+ 0x00,0x40,0x20,0x10,0x08,0x04,0x02,0x00,
+ 0x00,0x3E,0x61,0x51,0x49,0x45,0x3E,0x00,
+ 0x00,0x44,0x42,0x7F,0x40,0x40,0x00,0x00,
+ 0x00,0x62,0x51,0x51,0x49,0x49,0x66,0x00,
+ 0x00,0x22,0x41,0x49,0x49,0x49,0x36,0x00,
+ 0x10,0x18,0x14,0x52,0x7F,0x50,0x10,0x00,
+ 0x00,0x27,0x45,0x45,0x45,0x45,0x39,0x00,
+ 0x00,0x3C,0x4A,0x49,0x49,0x49,0x30,0x00,
+ 0x00,0x03,0x01,0x71,0x09,0x05,0x03,0x00,
+ 0x00,0x36,0x49,0x49,0x49,0x49,0x36,0x00,
+ 0x00,0x06,0x49,0x49,0x49,0x29,0x1E,0x00,
+ 0x00,0x00,0x00,0x66,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x80,0x66,0x00,0x00,0x00,0x00,
+ 0x00,0x08,0x14,0x22,0x41,0x00,0x00,0x00,
+ 0x00,0x24,0x24,0x24,0x24,0x24,0x24,0x00,
+ 0x00,0x00,0x00,0x41,0x22,0x14,0x08,0x00,
+ 0x00,0x02,0x01,0x01,0x51,0x09,0x06,0x00,
+ 0x00,0x3E,0x41,0x5D,0x55,0x55,0x1E,0x00,
+ 0x00,0x7C,0x12,0x11,0x11,0x12,0x7C,0x00,
+ 0x00,0x41,0x7F,0x49,0x49,0x49,0x36,0x00,
+ 0x00,0x1C,0x22,0x41,0x41,0x41,0x22,0x00,
+ 0x00,0x41,0x7F,0x41,0x41,0x22,0x1C,0x00,
+ 0x00,0x41,0x7F,0x49,0x5D,0x41,0x63,0x00,
+ 0x00,0x41,0x7F,0x49,0x1D,0x01,0x03,0x00,
+ 0x00,0x1C,0x22,0x41,0x51,0x51,0x72,0x00,
+ 0x00,0x7F,0x08,0x08,0x08,0x08,0x7F,0x00,
+ 0x00,0x00,0x41,0x7F,0x41,0x00,0x00,0x00,
+ 0x00,0x30,0x40,0x40,0x41,0x3F,0x01,0x00,
+ 0x00,0x41,0x7F,0x08,0x14,0x22,0x41,0x40,
+ 0x00,0x41,0x7F,0x41,0x40,0x40,0x60,0x00,
+ 0x00,0x7F,0x01,0x02,0x04,0x02,0x01,0x7F,
+ 0x00,0x7F,0x01,0x02,0x04,0x08,0x7F,0x00,
+ 0x00,0x3E,0x41,0x41,0x41,0x41,0x3E,0x00,
+ 0x00,0x41,0x7F,0x49,0x09,0x09,0x06,0x00,
+ 0x00,0x1E,0x21,0x21,0x31,0x21,0x5E,0x40,
+ 0x00,0x41,0x7F,0x49,0x19,0x29,0x46,0x00,
+ 0x00,0x26,0x49,0x49,0x49,0x49,0x32,0x00,
+ 0x00,0x03,0x01,0x41,0x7F,0x41,0x01,0x03,
+ 0x00,0x3F,0x40,0x40,0x40,0x40,0x3F,0x00,
+ 0x00,0x0F,0x10,0x20,0x40,0x20,0x10,0x0F,
+ 0x00,0x3F,0x40,0x40,0x38,0x40,0x40,0x3F,
+ 0x00,0x41,0x22,0x14,0x08,0x14,0x22,0x41,
+ 0x00,0x01,0x02,0x44,0x78,0x44,0x02,0x01,
+ 0x00,0x43,0x61,0x51,0x49,0x45,0x43,0x61,
+ 0x00,0x7F,0x41,0x41,0x41,0x00,0x00,0x00,
+ 0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x00,
+ 0x00,0x41,0x41,0x41,0x7F,0x00,0x00,0x00,
+ 0x08,0x04,0x02,0x01,0x02,0x04,0x08,0x00,
+ 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
+ 0x00,0x00,0x00,0x03,0x04,0x00,0x00,0x00,
+ 0x00,0x20,0x54,0x54,0x54,0x54,0x78,0x40,
+ 0x00,0x01,0x7F,0x30,0x48,0x48,0x48,0x30,
+ 0x00,0x38,0x44,0x44,0x44,0x44,0x28,0x00,
+ 0x00,0x30,0x48,0x48,0x48,0x31,0x7F,0x40,
+ 0x00,0x38,0x54,0x54,0x54,0x54,0x18,0x00,
+ 0x00,0x00,0x48,0x7E,0x49,0x01,0x02,0x00,
+ 0x00,0x98,0xA4,0xA4,0xA4,0xA4,0x78,0x04,
+ 0x00,0x41,0x7F,0x08,0x04,0x04,0x78,0x00,
+ 0x00,0x00,0x44,0x7D,0x40,0x00,0x00,0x00,
+ 0x00,0x60,0x80,0x80,0x80,0x84,0x7D,0x00,
+ 0x00,0x01,0x7F,0x10,0x28,0x44,0x40,0x00,
+ 0x00,0x00,0x41,0x7F,0x40,0x00,0x00,0x00,
+ 0x00,0x7C,0x04,0x04,0x78,0x04,0x04,0x78,
+ 0x00,0x7C,0x08,0x04,0x04,0x04,0x78,0x00,
+ 0x00,0x38,0x44,0x44,0x44,0x44,0x38,0x00,
+ 0x00,0x84,0xFC,0x98,0x24,0x24,0x18,0x00,
+ 0x00,0x18,0x24,0x24,0x98,0xFC,0x84,0x00,
+ 0x00,0x44,0x7C,0x48,0x04,0x04,0x18,0x00,
+ 0x00,0x48,0x54,0x54,0x54,0x54,0x24,0x00,
+ 0x00,0x04,0x04,0x3F,0x44,0x44,0x20,0x00,
+ 0x00,0x3C,0x40,0x40,0x40,0x20,0x7C,0x00,
+ 0x00,0x0C,0x10,0x20,0x40,0x20,0x10,0x0C,
+ 0x00,0x3C,0x40,0x40,0x38,0x40,0x40,0x3C,
+ 0x00,0x44,0x28,0x10,0x28,0x44,0x00,0x00,
+ 0x00,0x9C,0xA0,0xA0,0xA0,0xA0,0x7C,0x00,
+ 0x00,0x44,0x64,0x54,0x4C,0x44,0x00,0x00,
+ 0x00,0x08,0x08,0x36,0x41,0x41,0x00,0x00,
+ 0x00,0x00,0x00,0x77,0x00,0x00,0x00,0x00,
+ 0x00,0x00,0x41,0x41,0x36,0x08,0x08,0x00,
+ 0x00,0x02,0x01,0x01,0x02,0x02,0x01,0x00,
+ 0x00,0x70,0x48,0x44,0x42,0x44,0x48,0x70,
+ 0x00,0x0E,0x91,0x91,0xB1,0xB1,0x4A,0x00,
+ 0x00,0x3A,0x40,0x40,0x40,0x7A,0x40,0x00,
+ 0x00,0x38,0x54,0x54,0x55,0x55,0x18,0x00,
+ 0x00,0x22,0x55,0x55,0x55,0x79,0x42,0x00,
+ 0x00,0x21,0x54,0x54,0x54,0x78,0x41,0x00,
+ 0x00,0x20,0x55,0x55,0x54,0x78,0x40,0x00,
+ 0x00,0x20,0x54,0x55,0x54,0x78,0x40,0x00,
+ 0x00,0x18,0x24,0xA4,0xA4,0xE4,0x40,0x00,
+ 0x00,0x3A,0x55,0x55,0x55,0x55,0x1A,0x00,
+ 0x00,0x39,0x54,0x54,0x54,0x54,0x19,0x00,
+ 0x00,0x38,0x55,0x55,0x54,0x54,0x18,0x00,
+ 0x00,0x00,0x01,0x44,0x7C,0x41,0x00,0x00,
+ 0x02,0x01,0x45,0x7D,0x41,0x01,0x02,0x00,
+ 0x00,0x00,0x01,0x45,0x7C,0x40,0x00,0x00,
+ 0x00,0x79,0x14,0x12,0x12,0x14,0x79,0x00,
+ 0x00,0x70,0x28,0x2B,0x2B,0x28,0x70,0x00,
+ 0x00,0x44,0x7C,0x54,0x55,0x45,0x00,0x00,
+ 0x00,0x20,0x54,0x54,0x58,0x38,0x54,0x54,
+ 0x00,0x7C,0x0A,0x09,0x09,0x7F,0x49,0x49,
+ 0x00,0x30,0x4A,0x49,0x49,0x4A,0x30,0x00,
+ 0x00,0x32,0x48,0x48,0x48,0x48,0x32,0x00,
+ 0x00,0x30,0x49,0x4A,0x48,0x48,0x30,0x00,
+ 0x00,0x38,0x42,0x41,0x41,0x42,0x38,0x00,
+ 0x00,0x38,0x41,0x42,0x40,0x40,0x38,0x00,
+ 0x00,0x1A,0xA0,0xA0,0xA0,0xA0,0x7A,0x00,
+ 0x00,0x19,0x24,0x42,0x42,0x24,0x19,0x00,
+ 0x00,0x3D,0x40,0x40,0x40,0x40,0x3D,0x00,
+ 0x00,0x18,0x24,0x24,0xE7,0x24,0x24,0x00,
+ 0x00,0x68,0x5E,0x49,0x41,0x42,0x20,0x00,
+ 0x00,0x15,0x16,0x7C,0x16,0x15,0x00,0x00,
+ 0x81,0xFF,0x85,0x05,0x17,0xFA,0x90,0x50,
+ 0x40,0x88,0x88,0x7F,0x09,0x09,0x02,0x00,
+ 0x00,0x20,0x54,0x54,0x55,0x79,0x40,0x00,
+};
--- /dev/null
+/**************************************************************************/
+/*!
+ @file smallfonts.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __SMALLFONTS_H_
+#define __SMALLFONTS_H_
+
+/* Partially based on original code for the KS0108 by Stephane Rey */
+/* Current version by Kevin Townsend */
+/* Last Updated: 12 May 2009 */
+
+#include "projectconfig.h"
+
+struct FONT_DEF
+{
+ uint8_t u8Width; /* Character width for storage */
+ uint8_t u8Height; /* Character height for storage */
+ uint8_t u8FirstChar; /* The first character available */
+ uint8_t u8LastChar; /* The last character available */
+ const uint8_t *au8FontTable; /* Font table start address in memory */
+};
+
+extern const struct FONT_DEF Font_System3x6;
+extern const struct FONT_DEF Font_System5x8;
+extern const struct FONT_DEF Font_System7x8;
+extern const struct FONT_DEF Font_8x8;
+extern const struct FONT_DEF Font_8x8Thin;
+
+extern const uint8_t au8FontSystem3x6[];
+extern const uint8_t au8FontSystem5x8[];
+extern const uint8_t au8FontSystem7x8[];
+extern const uint8_t au8Font8x8[];
+extern const uint8_t au8Font8x8Thin[];
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file bmp.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Loads uncomprssed 24-bit windows bitmaps images
+
+ Based on the information available at:
+ http://local.wasp.uwa.edu.au/~pbourke/dataformats/bmp/
+ and some sample code written by Michael Sweet
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "bmp.h"
+
+#include "drivers/lcd/tft/drawing.h"
+#include "drivers/lcd/tft/lcd.h"
+
+// Only include read support if CFG_SDCARD is defined
+#ifdef CFG_SDCARD
+ #include "drivers/fatfs/diskio.h"
+ #include "drivers/fatfs/ff.h"
+ static FATFS Fatfs[1];
+ #if defined CFG_SDCARD_READONLY && CFG_SDCARD_READONLY == 0
+ static FILINFO Finfo;
+ static FIL bmpSDFile;
+ #endif
+
+/**************************************************************************/
+/* */
+/* ----------------------- Private Methods ------------------------------ */
+/* */
+/**************************************************************************/
+bmp_error_t bmpParseBitmap(uint16_t x, uint16_t y, FIL file)
+{
+ UINT bytesRead;
+ bmp_header_t header;
+ bmp_infoheader_t infoHeader;
+
+ // Read the file header
+ // ToDo: Optimise this to read buffer once and parse it
+ f_read(&file, &header.type, sizeof(header.type), &bytesRead);
+ f_read(&file, &header.size, sizeof(header.size), &bytesRead);
+ f_read(&file, &header.reserved1, sizeof(header.reserved1), &bytesRead);
+ f_read(&file, &header.reserved2, sizeof(header.reserved2), &bytesRead);
+ f_read(&file, &header.offset, sizeof(header.offset), &bytesRead);
+
+ // Make sure this is a bitmap (first two bytes = 'BM' or 0x4D42 on little-endian systems)
+ if (header.type != 0x4D42) return BMP_ERROR_NOTABITMAP;
+
+ // Read the info header
+ // ToDo: Optimise this to read buffer once and parse it
+ f_read(&file, &infoHeader.size, sizeof(infoHeader.size), &bytesRead);
+ f_read(&file, &infoHeader.width, sizeof(infoHeader.width), &bytesRead);
+ f_read(&file, &infoHeader.height, sizeof(infoHeader.height), &bytesRead);
+ f_read(&file, &infoHeader.planes, sizeof(infoHeader.planes), &bytesRead);
+ f_read(&file, &infoHeader.bits, sizeof(infoHeader.bits), &bytesRead);
+ f_read(&file, &infoHeader.compression, sizeof(infoHeader.compression), &bytesRead);
+ f_read(&file, &infoHeader.imagesize, sizeof(infoHeader.imagesize), &bytesRead);
+ f_read(&file, &infoHeader.xresolution, sizeof(infoHeader.xresolution), &bytesRead);
+ f_read(&file, &infoHeader.yresolution, sizeof(infoHeader.yresolution), &bytesRead);
+ f_read(&file, &infoHeader.ncolours, sizeof(infoHeader.ncolours), &bytesRead);
+ f_read(&file, &infoHeader.importantcolours, sizeof(infoHeader.importantcolours), &bytesRead);
+
+ // Make sure that this is a 24-bit image
+ if (infoHeader.bits != 24)
+ return BMP_ERROR_INVALIDBITDEPTH;
+
+ // Check image dimensions
+ if ((infoHeader.width > lcdGetWidth()) | (infoHeader.height > lcdGetHeight()))
+ return BMP_ERROR_INVALIDDIMENSIONS;
+
+ // Make sure image is not compressed
+ if (infoHeader.compression != BMP_COMPRESSION_NONE)
+ return BMP_ERROR_COMPRESSEDDATA;
+
+ // Read 24-bit image data
+ uint32_t px, py;
+ FRESULT res;
+ uint8_t buffer[infoHeader.width * 3];
+ for (py = infoHeader.height; py > 0; py--)
+ {
+ // Read one row at a time
+ res = f_read(&file, &buffer, infoHeader.width * 3, &bytesRead);
+ if (res || bytesRead == 0)
+ {
+ // Error or EOF
+ return BMP_ERROR_PREMATUREEOF;
+ }
+ for (px = 0; px < infoHeader.width; px++)
+ {
+ // Render pixel
+ // ToDo: This is a brutally slow way of rendering bitmaps ...
+ // update to pass one row of data at a time
+ drawPixel(x + px, y + py - 1, drawRGB24toRGB565(buffer[(px * 3) + 2], buffer[(px * 3) + 1], buffer[(px * 3)]));
+ }
+ }
+
+ return BMP_ERROR_NONE;
+}
+
+/**************************************************************************/
+/* */
+/* ----------------------- Public Methods ------------------------------- */
+/* */
+/**************************************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Loads a 24-bit Windows bitmap image from an SD card and
+ renders it
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/tft/bmp.h"
+
+ bmp_error_t error;
+
+ // Draw image.bmp (from the root folder) starting at pixel 0,0
+ error = bmpDrawBitmap(0, 0, "/image.bmp");
+
+ // Check 'error' for problems such as BMP_ERROR_FILENOTFOUND
+
+ @endcode
+*/
+/**************************************************************************/
+bmp_error_t bmpDrawBitmap(uint16_t x, uint16_t y, const char* filename)
+{
+ bmp_error_t error = BMP_ERROR_NONE;
+ DSTATUS stat;
+ BYTE res;
+
+ stat = disk_initialize(0);
+
+ if ((stat & STA_NOINIT) || (stat & STA_NODISK))
+ {
+ // Card not initialised or no disk present
+ return BMP_ERROR_SDINITFAIL;
+ }
+
+ if (stat == 0)
+ {
+ // Try to mount drive
+ res = f_mount(0, &Fatfs[0]);
+ if (res != FR_OK)
+ {
+ // Failed to mount 0:
+ return BMP_ERROR_SDINITFAIL;
+ }
+ if (res == FR_OK)
+ {
+ // Try to open the requested file
+ FIL imgfile;
+ if(f_open(&imgfile, filename, FA_READ | FA_OPEN_EXISTING) != FR_OK)
+ {
+ // Unable to open the requested file
+ return BMP_ERROR_FILENOTFOUND;
+ }
+ // Try to render the specified image
+ error = bmpParseBitmap(x, y, imgfile);
+ // Close file
+ f_close(&imgfile);
+ // Unmount drive
+ f_mount(0,0);
+ // Return results
+ return error;
+ }
+ }
+
+ // Return OK signal
+ return BMP_ERROR_NONE;
+}
+
+#if defined CFG_SDCARD_READONLY && CFG_SDCARD_READONLY == 0
+/**************************************************************************/
+/*!
+ @brief Writes the contents of the LCD screen to a 24-bit bitmap
+ images. CFG_SDCARD_READONLY must be set to '0' to be able
+ to use this function.
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/tft/bmp.h"
+
+ bmp_error_t error;
+
+ // Note: The LED stays on while the image is being written since
+ // it can take quite a while to read the entire screen
+ // pixel by pixel and write the data to the SD card
+
+ // Turn the LED on to signal busy state
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_ON);
+ // Write the screen contents to a bitmap image
+ error = bmpSaveScreenshot("capture.bmp");
+ // Turn the LED off to indicate that the capture is complete
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
+
+ // Check 'error' for problems
+
+ @endcode
+*/
+/**************************************************************************/
+bmp_error_t bmpSaveScreenshot(const char* filename)
+{
+ DSTATUS stat;
+ bmp_error_t error = BMP_ERROR_NONE;
+ bmp_header_t header;
+ bmp_infoheader_t infoHeader;
+ uint32_t lcdWidth, lcdHeight, x, y, bgra32;
+ UINT bytesWritten;
+ uint16_t rgb565, eof;
+ uint8_t r, g, b;
+
+ // Create a new file (Crossworks only)
+ stat = disk_initialize(0);
+ if (stat & STA_NOINIT)
+ {
+ return BMP_ERROR_SDINITFAIL;
+ }
+ if (stat & STA_NODISK)
+ {
+ return BMP_ERROR_SDINITFAIL;
+ }
+ if (stat == 0)
+ {
+ // SD card sucessfully initialised
+ DSTATUS stat;
+ DWORD p2;
+ WORD w1;
+ BYTE res, b1;
+ DIR dir;
+ // Try to mount drive
+ res = f_mount(0, &Fatfs[0]);
+ if (res != FR_OK)
+ {
+ return BMP_ERROR_SDINITFAIL;
+ }
+ if (res == FR_OK)
+ {
+ // Create a file (overwriting any existing file!)
+ if(f_open(&bmpSDFile, filename, FA_READ | FA_WRITE | FA_CREATE_ALWAYS)!=FR_OK)
+ {
+ return BMP_ERROR_UNABLETOCREATEFILE;
+ }
+ }
+ }
+
+ lcdWidth = lcdGetWidth();
+ lcdHeight = lcdGetHeight();
+
+ // Create header
+ header.type = 0x4d42; // 'BM'
+ header.size = (lcdWidth * lcdHeight * 3) + sizeof(header) + sizeof(infoHeader); // File size in bytes
+ header.reserved1 = 0;
+ header.reserved2 = 0;
+ header.offset = 0x36; // Offset in bytes to the image data
+
+ // Create infoheader
+ infoHeader.size = sizeof(infoHeader);
+ infoHeader.width = lcdWidth;
+ infoHeader.height = lcdHeight;
+ infoHeader.planes = 1;
+ infoHeader.bits = 24;
+ infoHeader.compression = BMP_COMPRESSION_NONE;
+ infoHeader.imagesize = (lcdWidth * lcdHeight * 3) + 2; // 3 bytes per pixel + 2 bytes for EOF
+ infoHeader.xresolution = 0x0B12;
+ infoHeader.yresolution = 0x0B12;
+ infoHeader.ncolours = 0;
+ infoHeader.importantcolours = 0;
+
+ // Write header to disk
+ f_write(&bmpSDFile, &header.type, sizeof(header.type), &bytesWritten);
+ f_write(&bmpSDFile, &header.size, sizeof(header.size), &bytesWritten);
+ f_write(&bmpSDFile, &header.reserved1, sizeof(header.reserved1), &bytesWritten);
+ f_write(&bmpSDFile, &header.reserved2, sizeof(header.reserved2), &bytesWritten);
+ f_write(&bmpSDFile, &header.offset, sizeof(header.offset), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.size, sizeof(infoHeader.size), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.width, sizeof(infoHeader.width), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.height, sizeof(infoHeader.height), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.planes, sizeof(infoHeader.planes), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.bits, sizeof(infoHeader.bits), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.compression, sizeof(infoHeader.compression), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.imagesize, sizeof(infoHeader.imagesize), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.xresolution, sizeof(infoHeader.xresolution), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.yresolution, sizeof(infoHeader.yresolution), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.ncolours, sizeof(infoHeader.ncolours), &bytesWritten);
+ f_write(&bmpSDFile, &infoHeader.importantcolours, sizeof(infoHeader.importantcolours), &bytesWritten);
+
+ // Write image data to disk (starting from bottom row)
+ for (y = lcdHeight; y != 0; y--)
+ {
+ for (x = 0; x < lcdWidth; x++)
+ {
+ rgb565 = lcdGetPixel(x, y - 1); // Get RGB565 pixel
+ bgra32 = drawRGB565toBGRA32(rgb565); // Convert RGB565 to 24-bit color
+ r = (bgra32 & 0x00FF0000) >> 16;
+ g = (bgra32 & 0x0000FF00) >> 8;
+ b = (bgra32 & 0x000000FF);
+ f_write(&bmpSDFile, &b, 1, &bytesWritten); // Write RGB data
+ f_write(&bmpSDFile, &g, 1, &bytesWritten);
+ f_write(&bmpSDFile, &r, 1, &bytesWritten);
+ }
+ }
+
+ // Write EOF (2 bytes)
+ eof = 0x0000;
+ f_write(&bmpSDFile, &eof, 2, &bytesWritten);
+
+ // Close the file
+ f_close(&bmpSDFile);
+
+ // Return OK signal
+ return BMP_ERROR_NONE;
+}
+#endif // End of read-only check to write bitmaps
+
+#endif // End of CFG_SDCARD check
--- /dev/null
+/**************************************************************************/
+/*!
+ @file bmp.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __BMP_H__
+#define __BMP_H__
+
+#include "projectconfig.h"
+
+/**************************************************************************
+ Windows Bitmap File Format
+ -----------------------------------------------------------------------
+ Windows bitmap images are relatively easy to work with because the
+ format is basic and requires limited overhead to work with (in
+ practice, image data is very rarely compressed). Bitmap files have
+ the following structure:
+
+ --------------------------
+ | Header | 14 bytes
+ |-------------------------
+ | Info Header | 40 bytes
+ -----------------------
+ | Palette (optional) |
+ |-------------------------
+ | Image Data |
+ --------------------------
+
+ For more information on the bitmap file format, see:
+ http://local.wasp.uwa.edu.au/~pbourke/dataformats/bmp/
+
+ **************************************************************************/
+
+
+/**************************************************************************/
+/*!
+ @brief 14-byte Windows bitmap header
+*/
+/**************************************************************************/
+typedef struct
+{
+ uint16_t type; /* Magic identifier */
+ uint32_t size; /* File size in bytes */
+ uint16_t reserved1;
+ uint16_t reserved2;
+ uint32_t offset; /* Offset to image data, bytes */
+} bmp_header_t;
+
+/**************************************************************************/
+/*!
+ @brief 40-byte Windows bitmap info header
+*/
+/**************************************************************************/
+typedef struct
+{
+ uint32_t size; /* Header size in bytes */
+ int32_t width; /* Width of the image */
+ int32_t height; /* Height of image */
+ uint16_t planes; /* Number of colour planes */
+ uint16_t bits; /* Bits per pixel */
+ uint32_t compression; /* Compression type */
+ uint32_t imagesize; /* Image size in bytes */
+ int32_t xresolution; /* Pixels per meter */
+ int32_t yresolution; /* Pixels per meter */
+ uint32_t ncolours; /* Number of colours */
+ uint32_t importantcolours; /* Important colours */
+} bmp_infoheader_t;
+
+/**************************************************************************/
+/*!
+ @brief Describes the different compression methods available in
+ Windows bitmap images, though compression is not currently
+ supported by this code.
+*/
+/**************************************************************************/
+typedef enum
+{
+ BMP_COMPRESSION_NONE = 0,
+ BMP_COMPRESSION_RLE8 = 1,
+ BMP_COMPRESSION_RLE4 = 2,
+ BMP_COMPRESSION_RGBMASK = 3
+} bmp_compression_t;
+
+/**************************************************************************/
+/*!
+ @brief 24-bit pixel data
+*/
+/**************************************************************************/
+typedef struct
+{
+ uint8_t rgbBlue; /* Blue value */
+ uint8_t rgbGreen; /* Green value */
+ uint8_t rgbRed; /* Red value */
+} bmp_rgbdata_t;
+
+/**************************************************************************/
+/*!
+ @brief Error return codes when processing bitmap images
+*/
+/**************************************************************************/
+typedef enum
+{
+ BMP_ERROR_NONE = 0,
+ BMP_ERROR_SDINITFAIL = 1,
+ BMP_ERROR_FILENOTFOUND = 2,
+ BMP_ERROR_UNABLETOCREATEFILE = 3,
+ BMP_ERROR_NOTABITMAP = 10, /* First two bytes of the image not 'BM' */
+ BMP_ERROR_INVALIDBITDEPTH = 11, /* Image is not 24-bits */
+ BMP_ERROR_COMPRESSEDDATA = 12, /* Image contains compressed data (not supported) */
+ BMP_ERROR_INVALIDDIMENSIONS = 13, /* Image is > CFG_TFTLCD_WIDTH pixels wide or > CFG_TFTLCD_HEIGHT pixels high */
+ BMP_ERROR_PREMATUREEOF = 14 /* EOF reached unexpectedly in pixel data */
+} bmp_error_t;
+
+bmp_error_t bmpDrawBitmap(uint16_t x, uint16_t y, const char* filename);
+
+#if defined CFG_SDCARD_READONLY && CFG_SDCARD_READONLY == 0
+bmp_error_t bmpSaveScreenshot(const char* filename);
+#endif
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file colors.h
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Common 16-bit RGB565 color definitions
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __COLORS_H__
+#define __COLORS_H__
+
+#include "projectconfig.h"
+
+// Basic Color definitions
+#define COLOR_BLACK (uint16_t)(0x0000)
+#define COLOR_BLUE (uint16_t)(0x001F)
+#define COLOR_RED (uint16_t)(0xF800)
+#define COLOR_GREEN (uint16_t)(0x07E0)
+#define COLOR_CYAN (uint16_t)(0x07FF)
+#define COLOR_MAGENTA (uint16_t)(0xF81F)
+#define COLOR_YELLOW (uint16_t)(0xFFE0)
+#define COLOR_WHITE (uint16_t)(0xFFFF)
+
+// Grayscale Values
+#define COLOR_GRAY_15 (uint16_t)(0x0861) // 15 15 15
+#define COLOR_GRAY_30 (uint16_t)(0x18E3) // 30 30 30
+#define COLOR_GRAY_50 (uint16_t)(0x3186) // 50 50 50
+#define COLOR_GRAY_80 (uint16_t)(0x528A) // 80 80 80
+#define COLOR_GRAY_128 (uint16_t)(0x8410) // 128 128 128
+#define COLOR_GRAY_200 (uint16_t)(0xCE59) // 200 200 200
+#define COLOR_GRAY_225 (uint16_t)(0xE71C) // 225 225 225
+
+// Color Palettes
+#define COLOR_THEME_LIMEGREEN_BASE (uint16_t)(0xD7F0) // 211 255 130
+#define COLOR_THEME_LIMEGREEN_DARKER (uint16_t)(0x8DE8) // 137 188 69
+#define COLOR_THEME_LIMEGREEN_LIGHTER (uint16_t)(0xEFF9) // 238 255 207
+#define COLOR_THEME_LIMEGREEN_SHADOW (uint16_t)(0x73EC) // 119 127 103
+#define COLOR_THEME_LIMEGREEN_ACCENT (uint16_t)(0xAE6D) // 169 204 104
+
+#define COLOR_THEME_VIOLET_BASE (uint16_t)(0x8AEF) // 143 94 124
+#define COLOR_THEME_VIOLET_DARKER (uint16_t)(0x4187) // 66 49 59
+#define COLOR_THEME_VIOLET_LIGHTER (uint16_t)(0xC475) // 194 142 174
+#define COLOR_THEME_VIOLET_SHADOW (uint16_t)(0x40E6) // 66 29 52
+#define COLOR_THEME_VIOLET_ACCENT (uint16_t)(0xC992) // 204 50 144
+
+#define COLOR_THEME_EARTHY_BASE (uint16_t)(0x6269) // 97 79 73
+#define COLOR_THEME_EARTHY_DARKER (uint16_t)(0x3103) // 48 35 31
+#define COLOR_THEME_EARTHY_LIGHTER (uint16_t)(0x8C30) // 140 135 129
+#define COLOR_THEME_EARTHY_SHADOW (uint16_t)(0xAB29) // 173 102 79
+#define COLOR_THEME_EARTHY_ACCENT (uint16_t)(0xFE77) // 250 204 188
+
+#define COLOR_THEME_SKYBLUE_BASE (uint16_t)(0x95BF) // 150 180 255
+#define COLOR_THEME_SKYBLUE_DARKER (uint16_t)(0x73B0) // 113 118 131
+#define COLOR_THEME_SKYBLUE_LIGHTER (uint16_t)(0xE75F) // 227 235 255
+#define COLOR_THEME_SKYBLUE_SHADOW (uint16_t)(0x4ACF) // 75 90 127
+#define COLOR_THEME_SKYBLUE_ACCENT (uint16_t)(0xB5F9) // 182 188 204
+
+// Using these values allows you to update the entire UI color scheme in one location
+#define COLOR_THEME_DEFAULT_BASE COLOR_THEME_LIMEGREEN_BASE
+#define COLOR_THEME_DEFAULT_DARKER COLOR_THEME_LIMEGREEN_DARKER
+#define COLOR_THEME_DEFAULT_LIGHTER COLOR_THEME_LIMEGREEN_LIGHTER
+#define COLOR_THEME_DEFAULT_SHADOW COLOR_THEME_LIMEGREEN_SHADOW
+#define COLOR_THEME_DEFAULT_ACCENT COLOR_THEME_LIMEGREEN_ACCENT
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file alphanumeric.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Shows an alpha-numeric input dialogue
+
+ @section Example
+
+ @code
+ #include "drivers/lcd/tft/dialogues/alphanumeric.h"
+
+ // Print results from an alpha-numeric dialogue
+ char* results = alphaShowDialogue();
+ printf("%s\r\n", results);
+
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "alphanumeric.h"
+
+#include "core/systick/systick.h"
+#include "drivers/lcd/tft/lcd.h"
+#include "drivers/lcd/tft/drawing.h"
+#include "drivers/lcd/tft/touchscreen.h"
+#include "drivers/lcd/tft/fonts/dejavusans9.h"
+
+// Background and text input region colors
+#define ALPHA_COLOR_BACKGROUND COLOR_GRAY_15
+#define ALPHA_COLOR_INPUTFILL COLOR_GRAY_30
+#define ALPHA_COLOR_INPUTTEXT COLOR_WHITE
+// Button colors
+#define ALPHA_COLOR_BTN_BORDER COLOR_GRAY_30
+#define ALPHA_COLOR_BTN_FILL COLOR_GRAY_30
+#define ALPHA_COLOR_BTN_FONT COLOR_WHITE
+// Active button colors
+#define ALPHA_COLOR_BTNEN_BORDER COLOR_THEME_DEFAULT_DARKER
+#define ALPHA_COLOR_BTNEN_FILL COLOR_THEME_DEFAULT_BASE
+#define ALPHA_COLOR_BTNEN_FONT COLOR_BLACK
+
+/* This kind of messes with your head, but defining the pixel locations
+ this way allows the calculator example to be rendered on another
+ TFT LCD with a different screen resolution or orientation without
+ having to rewrite all the individual pixel-level code */
+
+#define ALPHA_BTN_SPACING (5)
+#define ALPHA_BTN_WIDTH ((lcdGetWidth() - (ALPHA_BTN_SPACING * 6)) / 5)
+#define ALPHA_KEYPAD_TOP ((lcdGetHeight() / 7) + (ALPHA_BTN_SPACING * 2))
+#define ALPHA_BTN_HEIGHT (((lcdGetHeight() - ALPHA_KEYPAD_TOP) - (ALPHA_BTN_SPACING * 7)) / 6)
+// #define ALPHA_BTN_WIDTH ((240 - (ALPHA_BTN_SPACING * 6)) / 5)
+// #define ALPHA_KEYPAD_TOP ((320 / 6) + (ALPHA_BTN_SPACING * 2))
+// #define ALPHA_BTN_HEIGHT (((320 - ALPHA_KEYPAD_TOP) - (ALPHA_BTN_SPACING * 7)) / 6)
+
+/* X/Y positions for buttons */
+#define ALPHA_ROW1_TOP (ALPHA_KEYPAD_TOP + ALPHA_BTN_SPACING)
+#define ALPHA_ROW2_TOP (ALPHA_KEYPAD_TOP + ALPHA_BTN_HEIGHT + (ALPHA_BTN_SPACING * 2))
+#define ALPHA_ROW3_TOP (ALPHA_KEYPAD_TOP + ((ALPHA_BTN_HEIGHT * 2) + ((ALPHA_BTN_SPACING) * 3)))
+#define ALPHA_ROW4_TOP (ALPHA_KEYPAD_TOP + ((ALPHA_BTN_HEIGHT * 3) + ((ALPHA_BTN_SPACING) * 4)))
+#define ALPHA_ROW5_TOP (ALPHA_KEYPAD_TOP + ((ALPHA_BTN_HEIGHT * 4) + ((ALPHA_BTN_SPACING) * 5)))
+#define ALPHA_ROW6_TOP (ALPHA_KEYPAD_TOP + ((ALPHA_BTN_HEIGHT * 5) + ((ALPHA_BTN_SPACING) * 6)))
+#define ALPHA_COL1_LEFT (ALPHA_BTN_SPACING)
+#define ALPHA_COL2_LEFT ((ALPHA_BTN_SPACING * 2) + ALPHA_BTN_WIDTH)
+#define ALPHA_COL3_LEFT ((ALPHA_BTN_SPACING * 3) + (ALPHA_BTN_WIDTH * 2))
+#define ALPHA_COL4_LEFT ((ALPHA_BTN_SPACING * 4) + (ALPHA_BTN_WIDTH * 3))
+#define ALPHA_COL5_LEFT ((ALPHA_BTN_SPACING * 5) + (ALPHA_BTN_WIDTH * 4))
+
+/* Control which 'page' is currently shown on the keypad */
+static uint8_t alphaPage = 0;
+
+/* Keeps track of the string contents */
+static uint8_t alphaString[80];
+static uint8_t *alphaString_ptr;
+
+/* For quick retrieval of button X/Y locqtions */
+uint32_t alphaBtnX[5], alphaBtnY[6];
+
+/* Array showing which characters should be displayed on each alphaPage */
+/* You can rearrange the keypad by modifying the array contents below */
+/* -------------------- -------------------- -------------------- --------------------
+ A B C D BACK a b c d BACK . , : ; BACK 7 8 9 BACK
+ E F G H I e f g h i ' " ( ) 4 5 6
+ J K L M N j k l m n ? ! { } 7 8 9
+ O P Q R S o p q r s # & @ ~ . 0 SPC
+ T U V W SHFT t u v w SHFT % = / \ SHFT SHFT
+ X Y Z SPC OK x y z SPC OK + - _ SPC OK OK
+ -------------------- -------------------- -------------------- -------------------- */
+char alphaKeys[4][6][5] = { { { 'A', 'B', 'C', 'D', '<' },
+ { 'E', 'F', 'G', 'H', 'I' },
+ { 'J', 'K', 'L', 'M', 'N' },
+ { 'O', 'P', 'Q', 'R', 'S' },
+ { 'T', 'U', 'V', 'W', '*' },
+ { 'X', 'Y', 'Z', ' ', '>' } },
+
+ { { 'a', 'b', 'c', 'd', '<' },
+ { 'e', 'f', 'g', 'h', 'i' },
+ { 'j', 'k', 'l', 'm', 'n' },
+ { 'o', 'p', 'q', 'r', 's' },
+ { 't', 'u', 'v', 'w', '*' },
+ { 'x', 'y', 'z', ' ', '>' } },
+
+ { { '.', ',', ':', ';', '<' },
+ { '\'', '\"', '(', ')', ' ' },
+ { '?', '!', '{', '}', ' ' },
+ { '#', '&', '@', '~', ' ' },
+ { '%', '=', '/', '\\', '*' },
+ { '+', '-', '_', ' ', '>' } },
+
+ { { '7', '8', '9', ' ', '<' },
+ { '4', '5', '6', ' ', ' ' },
+ { '1', '2', '3', ' ', ' ' },
+ { '.', '0', ' ', ' ', ' ' },
+ { ' ', ' ', ' ', ' ', '*'},
+ { ' ', ' ', ' ', ' ', '>' } } };
+
+/**************************************************************************/
+/*!
+ @brief Renders the UI
+*/
+/**************************************************************************/
+void alphaRenderButton(uint8_t alphaPage, uint8_t col, uint8_t row, bool selected)
+{
+ // Set colors depending on button state
+ uint16_t border, fill, font;
+ if (selected)
+ {
+ border = ALPHA_COLOR_BTNEN_BORDER;
+ fill = ALPHA_COLOR_BTNEN_FILL;
+ font = ALPHA_COLOR_BTNEN_FONT;
+ }
+ else
+ {
+ border = ALPHA_COLOR_BTN_BORDER;
+ fill = ALPHA_COLOR_BTN_FILL;
+ font = ALPHA_COLOR_BTN_FONT;
+ }
+
+ char c = alphaKeys[alphaPage][row][col];
+ char key[2] = { alphaKeys[alphaPage][row][col], '\0' };
+ // Handle special characters
+ switch (c)
+ {
+ case '<':
+ // Backspace
+ drawButton (alphaBtnX[col], alphaBtnY[row], ALPHA_BTN_WIDTH, ALPHA_BTN_HEIGHT, &dejaVuSans9ptFontInfo, 7, border, fill, font, NULL);
+ drawArrow (alphaBtnX[col] + ALPHA_BTN_WIDTH / 2 - 3, alphaBtnY[row] + ALPHA_BTN_HEIGHT / 2, 7, DRAW_DIRECTION_LEFT, font);
+ break;
+ case '*':
+ // Page Shift
+ drawButton (alphaBtnX[col], alphaBtnY[row], ALPHA_BTN_WIDTH, ALPHA_BTN_HEIGHT, &dejaVuSans9ptFontInfo, 7, border, fill, font, NULL);
+ drawArrow (alphaBtnX[col] + ALPHA_BTN_WIDTH / 2, (alphaBtnY[row] + ALPHA_BTN_HEIGHT / 2) - 3, 7, DRAW_DIRECTION_UP, font);
+ break;
+ case '>':
+ // OK
+ drawButton (alphaBtnX[col], alphaBtnY[row], ALPHA_BTN_WIDTH, ALPHA_BTN_HEIGHT, &dejaVuSans9ptFontInfo, 7, border, fill, font, "OK");
+ break;
+ default:
+ // Standard character
+ drawButton (alphaBtnX[col], alphaBtnY[row], ALPHA_BTN_WIDTH, ALPHA_BTN_HEIGHT, &dejaVuSans9ptFontInfo, 7, border, fill, font, key);
+ break;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Renders the UI
+*/
+/**************************************************************************/
+void alphaRefreshScreen(void)
+{
+ uint8_t x, y;
+
+ /* Draw keypad */
+ for (y = 0; y < 6; y++)
+ {
+ for (x = 0; x < 5; x++)
+ {
+ alphaRenderButton(alphaPage, x, y, false);
+ }
+ }
+
+ /* Render Text */
+ drawRectangleRounded(ALPHA_BTN_SPACING, ALPHA_BTN_SPACING, lcdGetWidth() - 1 - ALPHA_BTN_SPACING, ALPHA_KEYPAD_TOP - ALPHA_BTN_SPACING, ALPHA_COLOR_INPUTFILL, 10, DRAW_ROUNDEDCORNERS_ALL);
+ drawString(ALPHA_BTN_SPACING * 3, ALPHA_BTN_SPACING * 3, ALPHA_COLOR_INPUTTEXT, &dejaVuSans9ptFontInfo, (char *)&alphaString);
+}
+
+/**************************************************************************/
+/*!
+ @brief Processes the supplied touch data
+*/
+/**************************************************************************/
+char alphaHandleTouchEvent(void)
+{
+ tsTouchData_t data;
+ char result = '\0';
+ uint8_t row, col;
+ int32_t tsError = -1;
+
+ // Blocking delay until a valid touch event occurs
+ while (tsError)
+ {
+ tsError = tsWaitForEvent(&data, 0);
+ }
+
+ // Attempt to convert touch data to char
+ if ((data.ylcd < ALPHA_ROW1_TOP) || (data.ylcd > ALPHA_ROW6_TOP + ALPHA_BTN_HEIGHT))
+ {
+ return result;
+ }
+
+ // Get column
+ if ((data.xlcd > alphaBtnX[0]) && (data.xlcd < alphaBtnX[0] + ALPHA_BTN_WIDTH))
+ col = 0;
+ else if ((data.xlcd > alphaBtnX[1]) && (data.xlcd < alphaBtnX[1] + ALPHA_BTN_WIDTH))
+ col = 1;
+ else if ((data.xlcd > alphaBtnX[2]) && (data.xlcd < alphaBtnX[2] + ALPHA_BTN_WIDTH))
+ col = 2;
+ else if ((data.xlcd > alphaBtnX[3]) && (data.xlcd < alphaBtnX[3] + ALPHA_BTN_WIDTH))
+ col = 3;
+ else if ((data.xlcd > ALPHA_COL5_LEFT) && (data.xlcd < ALPHA_COL5_LEFT + ALPHA_BTN_WIDTH))
+ col = 4;
+ else
+ return result;
+
+ // Get row
+ if ((data.ylcd > ALPHA_ROW1_TOP) && (data.ylcd < ALPHA_ROW1_TOP + ALPHA_BTN_HEIGHT))
+ row = 0;
+ else if ((data.ylcd > ALPHA_ROW2_TOP) && (data.ylcd < ALPHA_ROW2_TOP + ALPHA_BTN_HEIGHT))
+ row = 1;
+ else if ((data.ylcd > ALPHA_ROW3_TOP) && (data.ylcd < ALPHA_ROW3_TOP + ALPHA_BTN_HEIGHT))
+ row = 2;
+ else if ((data.ylcd > ALPHA_ROW4_TOP) && (data.ylcd < ALPHA_ROW4_TOP + ALPHA_BTN_HEIGHT))
+ row = 3;
+ else if ((data.ylcd > ALPHA_ROW5_TOP) && (data.ylcd < ALPHA_ROW5_TOP + ALPHA_BTN_HEIGHT))
+ row = 4;
+ else if ((data.ylcd > ALPHA_ROW6_TOP) && (data.ylcd < ALPHA_ROW6_TOP + ALPHA_BTN_HEIGHT))
+ row = 5;
+ else
+ return result;
+
+ // Match found ... update button and process the results
+ alphaRenderButton(alphaPage, col, row, true);
+ result = alphaKeys[alphaPage][row][col];
+
+ if (result == '<')
+ {
+ // Trim character if backspace was pressed
+ if (alphaString_ptr > alphaString)
+ {
+ alphaString_ptr--;
+ *alphaString_ptr = '\0';
+ }
+ }
+ else if (result == '*')
+ {
+ // Switch page if the shift button was pressed
+ alphaPage++;
+ if (alphaPage > 3)
+ {
+ alphaPage = 0;
+ }
+ // Update the UI
+ alphaRefreshScreen();
+ }
+ else if (result == '>')
+ {
+ // OK button
+ systickDelay(CFG_TFTLCD_TS_KEYPADDELAY);
+ return '>';
+ }
+ else
+ {
+ // Add text to string buffer
+ *alphaString_ptr++ = result;
+ }
+
+ // Brief delay
+ systickDelay(CFG_TFTLCD_TS_KEYPADDELAY);
+
+ // Return button to deselected state
+ alphaRefreshScreen();
+ return result;
+}
+
+/**************************************************************************/
+/*!
+ @brief Displays the dialogue box and waits for valid user input
+
+ @section Example
+
+ @code
+ #include "drivers/lcd/tft/dialogues/alphanumeric.h"
+
+ // Print results from an alpha-numeric dialogue
+ char* results = alphaShowDialogue();
+ printf("%s\r\n", results);
+
+ @endcode
+*/
+/**************************************************************************/
+char* alphaShowDialogue(void)
+{
+ char result;
+
+ /* These need to be instantiated here since the width and height of
+ the lcd is retrieved dynamically depending on screen orientation */
+ alphaBtnX[0] = ALPHA_COL1_LEFT;
+ alphaBtnX[1] = ALPHA_COL2_LEFT;
+ alphaBtnX[2] = ALPHA_COL3_LEFT;
+ alphaBtnX[3] = ALPHA_COL4_LEFT;
+ alphaBtnX[4] = ALPHA_COL5_LEFT;
+ alphaBtnY[0] = ALPHA_ROW1_TOP;
+ alphaBtnY[1] = ALPHA_ROW2_TOP;
+ alphaBtnY[2] = ALPHA_ROW3_TOP;
+ alphaBtnY[3] = ALPHA_ROW4_TOP;
+ alphaBtnY[4] = ALPHA_ROW5_TOP;
+ alphaBtnY[5] = ALPHA_ROW6_TOP;
+
+ /* Initialise the string buffer */
+ memset(&alphaString[0], 0, sizeof(alphaString));
+ alphaString_ptr = alphaString;
+ alphaPage = 0;
+
+ /* Draw the background and render the buttons */
+ drawFill(ALPHA_COLOR_BACKGROUND);
+ alphaRefreshScreen();
+
+ /* Capture results until the 'OK' button is pressed */
+ while(1)
+ {
+ result = alphaHandleTouchEvent();
+ if (result == '>') return (char *)&alphaString;
+ }
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file alphanumeric.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __DIALOGUE_ALPHANUMERIC_H__
+#define __DIALOGUE_ALPHANUMERIC_H__
+
+#include "projectconfig.h"
+
+char * alphaShowDialogue(void);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file drawing.c
+ @author K. Townsend (microBuilder.eu)
+
+ drawLine and drawCircle adapted from a tutorial by Leonard McMillan:
+ http://www.cs.unc.edu/~mcmillan/
+
+ drawString based on an example from Eran Duchan:
+ http://www.pavius.net/downloads/tools/53-the-dot-factory
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "drawing.h"
+
+#ifdef CFG_SDCARD
+ #include "bmp.h"
+#endif
+
+/**************************************************************************/
+/* */
+/* ----------------------- Private Methods ------------------------------ */
+/* */
+/**************************************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Draws a single bitmap character
+*/
+/**************************************************************************/
+void drawCharBitmap(const uint16_t xPixel, const uint16_t yPixel, uint16_t color, const uint8_t *glyph, uint8_t glyphHeightPages, uint8_t glyphWidthBits)
+{
+ uint16_t verticalPage, horizBit, currentY, currentX;
+ uint16_t indexIntoGlyph;
+
+ // set initial current y
+ currentY = yPixel;
+ currentX = xPixel;
+
+ // for each page of the glyph
+ for (verticalPage = glyphHeightPages; verticalPage > 0; --verticalPage)
+ {
+ // for each horizontol bit
+ for (horizBit = 0; horizBit < glyphWidthBits; ++horizBit)
+ {
+ // next byte
+ indexIntoGlyph = (glyphHeightPages * horizBit) + verticalPage - 1;
+
+ currentX = xPixel + (horizBit);
+ // send the data byte
+ if (glyph[indexIntoGlyph] & (0X80)) drawPixel(currentX, currentY, color);
+ if (glyph[indexIntoGlyph] & (0X40)) drawPixel(currentX, currentY - 1, color);
+ if (glyph[indexIntoGlyph] & (0X20)) drawPixel(currentX, currentY - 2, color);
+ if (glyph[indexIntoGlyph] & (0X10)) drawPixel(currentX, currentY - 3, color);
+ if (glyph[indexIntoGlyph] & (0X08)) drawPixel(currentX, currentY - 4, color);
+ if (glyph[indexIntoGlyph] & (0X04)) drawPixel(currentX, currentY - 5, color);
+ if (glyph[indexIntoGlyph] & (0X02)) drawPixel(currentX, currentY - 6, color);
+ if (glyph[indexIntoGlyph] & (0X01)) drawPixel(currentX, currentY - 7, color);
+ }
+ // next line of pages
+ currentY += 8;
+ }
+}
+
+#if defined CFG_TFTLCD_INCLUDESMALLFONTS & CFG_TFTLCD_INCLUDESMALLFONTS == 1
+/**************************************************************************/
+/*!
+ @brief Draws a single smallfont character
+*/
+/**************************************************************************/
+void drawCharSmall(uint16_t x, uint16_t y, uint16_t color, uint8_t c, struct FONT_DEF font)
+{
+ uint8_t col, column[font.u8Width];
+
+ // Check if the requested character is available
+ if ((c >= font.u8FirstChar) && (c <= font.u8LastChar))
+ {
+ // Retrieve appropriate columns from font data
+ for (col = 0; col < font.u8Width; col++)
+ {
+ column[col] = font.au8FontTable[((c - 32) * font.u8Width) + col]; // Get first column of appropriate character
+ }
+ }
+ else
+ {
+ // Requested character is not available in this font ... send a space instead
+ for (col = 0; col < font.u8Width; col++)
+ {
+ column[col] = 0xFF; // Send solid space
+ }
+ }
+
+ // Render each column
+ uint16_t xoffset, yoffset;
+ for (xoffset = 0; xoffset < font.u8Width; xoffset++)
+ {
+ for (yoffset = 0; yoffset < (font.u8Height + 1); yoffset++)
+ {
+ uint8_t bit = 0x00;
+ bit = (column[xoffset] << (8 - (yoffset + 1))); // Shift current row bit left
+ bit = (bit >> 7); // Shift current row but right (results in 0x01 for black, and 0x00 for white)
+ if (bit)
+ {
+ drawPixel(x + xoffset, y + yoffset, color);
+ }
+ }
+ }
+}
+#endif
+
+/**************************************************************************/
+/*!
+ @brief Helper method to accurately draw individual circle points
+*/
+/**************************************************************************/
+void drawCirclePoints(int cx, int cy, int x, int y, uint16_t color)
+{
+ if (x == 0)
+ {
+ drawPixel(cx, cy + y, color);
+ drawPixel(cx, cy - y, color);
+ drawPixel(cx + y, cy, color);
+ drawPixel(cx - y, cy, color);
+ }
+ else if (x == y)
+ {
+ drawPixel(cx + x, cy + y, color);
+ drawPixel(cx - x, cy + y, color);
+ drawPixel(cx + x, cy - y, color);
+ drawPixel(cx - x, cy - y, color);
+ }
+ else if (x < y)
+ {
+ drawPixel(cx + x, cy + y, color);
+ drawPixel(cx - x, cy + y, color);
+ drawPixel(cx + x, cy - y, color);
+ drawPixel(cx - x, cy - y, color);
+ drawPixel(cx + y, cy + x, color);
+ drawPixel(cx - y, cy + x, color);
+ drawPixel(cx + y, cy - x, color);
+ drawPixel(cx - y, cy - x, color);
+ }
+}
+
+/**************************************************************************/
+/* */
+/* ----------------------- Public Methods ------------------------------- */
+/* */
+/**************************************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Draws a single pixel at the specified location
+
+ @param[in] x
+ Horizontal position
+ @param[in] y
+ Vertical position
+ @param[in] color
+ Color used when drawing
+*/
+/**************************************************************************/
+void drawPixel(uint16_t x, uint16_t y, uint16_t color)
+{
+ if ((x >= lcdGetWidth()) || (y >= lcdGetHeight()))
+ {
+ // Pixel out of range
+ return;
+ }
+
+ // Redirect to LCD
+ lcdDrawPixel(x, y, color);
+}
+
+/**************************************************************************/
+/*!
+ @brief Fills the screen with the specified color
+
+ @param[in] color
+ Color used when drawing
+*/
+/**************************************************************************/
+void drawFill(uint16_t color)
+{
+ lcdFillRGB(color);
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a simple color test pattern
+*/
+/**************************************************************************/
+void drawTestPattern(void)
+{
+ lcdTest();
+}
+
+#if defined CFG_TFTLCD_INCLUDESMALLFONTS & CFG_TFTLCD_INCLUDESMALLFONTS == 1
+/**************************************************************************/
+/*!
+ @brief Draws a string using a small font (6 of 8 pixels high).
+
+ @param[in] x
+ Starting x co-ordinate
+ @param[in] y
+ Starting y co-ordinate
+ @param[in] color
+ Color to use when rendering the font
+ @param[in] text
+ The string to render
+ @param[in] font
+ Pointer to the FONT_DEF to use when drawing the string
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/fonts/smallfonts.h"
+
+ drawStringSmall(1, 210, COLOR_WHITE, "5x8 System (Max 40 Characters)", Font_System5x8);
+ drawStringSmall(1, 220, COLOR_WHITE, "7x8 System (Max 30 Characters)", Font_System7x8);
+
+ @endcode
+*/
+/**************************************************************************/
+void drawStringSmall(uint16_t x, uint16_t y, uint16_t color, char* text, struct FONT_DEF font)
+{
+ uint8_t l;
+ for (l = 0; l < strlen(text); l++)
+ {
+ drawCharSmall(x + (l * (font.u8Width + 1)), y, color, text[l], font);
+ }
+}
+#endif
+
+/**************************************************************************/
+/*!
+ @brief Draws a string using the supplied font
+
+ @param[in] x
+ Starting x co-ordinate
+ @param[in] y
+ Starting y co-ordinate
+ @param[in] color
+ Color to use when rendering the font
+ @param[in] fontInfo
+ Pointer to the FONT_INFO to use when drawing the string
+ @param[in] str
+ The string to render
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/tft/fonts/veramono9.h"
+
+ drawString(0, 90, COLOR_BLACK, &bitstreamVeraSansMono9ptFontInfo, "Vera Mono 9 (30 chars wide)");
+ drawString(0, 105, COLOR_BLACK, &bitstreamVeraSansMono9ptFontInfo, "123456789012345678901234567890");
+
+ @endcode
+*/
+/**************************************************************************/
+void drawString(uint16_t x, uint16_t y, uint16_t color, const FONT_INFO *fontInfo, char *str)
+{
+ uint16_t currentX, charWidth, characterToOutput;
+ const FONT_CHAR_INFO *charInfo;
+ uint16_t charOffset;
+
+ // set current x, y to that of requested
+ currentX = x;
+
+ // while not NULL
+ while (*str != '\0')
+ {
+ // get character to output
+ characterToOutput = *str;
+
+ // get char info
+ charInfo = fontInfo->charInfo;
+
+ // some fonts have character descriptors, some don't
+ if (charInfo != NULL)
+ {
+ // get correct char offset
+ charInfo += (characterToOutput - fontInfo->startChar);
+
+ // get width from char info
+ charWidth = charInfo->widthBits;
+
+ // get offset from char info
+ charOffset = charInfo->offset;
+ }
+ else
+ {
+ // if no char info, char width is always 5
+ charWidth = 5;
+
+ // char offset - assume 5 * letter offset
+ charOffset = (characterToOutput - fontInfo->startChar) * 5;
+ }
+
+ // Send individual characters
+ drawCharBitmap(currentX, y, color, &fontInfo->data[charOffset], fontInfo->heightPages, charWidth);
+
+ // next char X
+ currentX += charWidth + 1;
+
+ // next char
+ str++;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Returns the width in pixels of a string when it is rendered
+
+ This method can be used to determine whether a string will fit
+ inside a specific area, or if it needs to be broken up into multiple
+ lines to be properly rendered on the screen.
+
+ This function only applied to bitmap fonts (which can have variable
+ widths). All smallfonts (if available) are fixed width and can
+ easily have their width calculated without costly functions like
+ this one.
+
+ @param[in] fontInfo
+ Pointer to the FONT_INFO for the font that will be used
+ @param[in] str
+ The string that will be rendered
+*/
+/**************************************************************************/
+uint16_t drawGetStringWidth(const FONT_INFO *fontInfo, char *str)
+{
+ uint16_t width = 0;
+ uint32_t currChar;
+ uint32_t startChar = fontInfo->startChar;
+
+ // until termination
+ for (currChar = *str; currChar; currChar = *(++str))
+ {
+ // if char info exists for the font, use width from there
+ if (fontInfo->charInfo != NULL)
+ {
+ width += fontInfo->charInfo[currChar - startChar].widthBits + 1;
+ }
+ else
+ {
+ width += 5 + 1;
+ }
+ }
+
+ /* return the wdith */
+ return width;
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a bresenham line
+
+ @param[in] x0
+ Starting x co-ordinate
+ @param[in] y0
+ Starting y co-ordinate
+ @param[in] x1
+ Ending x co-ordinate
+ @param[in] y1
+ Ending y co-ordinate
+ @param[in] color
+ Color used when drawing
+*/
+/**************************************************************************/
+void drawLine ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color )
+{
+ drawLineDotted(x0, y0, x1, y1, 0, 1, color);
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a bresenham line with a fixed pattern of empty
+ and solid pixels
+
+ Based on: http://www.cs.unc.edu/~mcmillan/comp136/Lecture6/Lines.html
+
+ @param[in] x0
+ Starting x co-ordinate
+ @param[in] y0
+ Starting y co-ordinate
+ @param[in] x1
+ Ending x co-ordinate
+ @param[in] y1
+ Ending y co-ordinate
+ @param[in] empty
+ The number of 'empty' pixels to render
+ @param[in] solid
+ The number of 'solid' pixels to render
+ @param[in] color
+ Color used when drawing
+*/
+/**************************************************************************/
+void drawLineDotted ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t empty, uint16_t solid, uint16_t color )
+{
+ if (solid == 0)
+ {
+ return;
+ }
+
+ // If a negative y int was passed in it will overflow to 65K something
+ // Ugly, but drawCircleFilled() can pass in negative values so we need
+ // to check the values here
+ y0 = y0 > 65000 ? 0 : y0;
+ y1 = y1 > 65000 ? 0 : y1;
+
+ // Check if we can use the optimised horizontal line method
+ if ((y0 == y1) && (empty == 0))
+ {
+ lcdDrawHLine(x0, x1, y0, color);
+ return;
+ }
+
+ // Check if we can use the optimised vertical line method.
+ // This can make a huge difference in performance, but may
+ // not work properly on every LCD controller:
+ // ex.: drawCircleFilled(120, 160, 50, COLOR_RED);
+ // = 678834 cycles using lcdDrawVLine w/ILI9328 = 9.43mS @ 72MHz
+ // = 7546261 w/o lcdDrawVLine, setting each pixel = 104.8mS @ 72MHz
+ if ((x0 == x1) && (empty == 0))
+ {
+ // Warning: This may actually be slower than drawing individual pixels on
+ // short lines ... Set a minimum line size to use the 'optimised' method
+ // (which changes the screen orientation) ?
+ lcdDrawVLine(x0, y0, y1, color);
+ return;
+ }
+
+ // Draw non-horizontal or dotted line
+ int dy = y1 - y0;
+ int dx = x1 - x0;
+ int stepx, stepy;
+ int emptycount, solidcount;
+
+ if (dy < 0) { dy = -dy; stepy = -1; } else { stepy = 1; }
+ if (dx < 0) { dx = -dx; stepx = -1; } else { stepx = 1; }
+ dy <<= 1; // dy is now 2*dy
+ dx <<= 1; // dx is now 2*dx
+
+ emptycount = empty;
+ solidcount = solid;
+
+ drawPixel(x0, y0, color); // always start with solid pixels
+ solidcount--;
+ if (dx > dy)
+ {
+ int fraction = dy - (dx >> 1); // same as 2*dy - dx
+ while (x0 != x1)
+ {
+ if (fraction >= 0)
+ {
+ y0 += stepy;
+ fraction -= dx; // same as fraction -= 2*dx
+ }
+ x0 += stepx;
+ fraction += dy; // same as fraction -= 2*dy
+ if (empty == 0)
+ {
+ // always draw a pixel ... no dotted line requested
+ drawPixel(x0, y0, color);
+ }
+ else if (solidcount)
+ {
+ // Draw solid pxiel and decrement counter
+ drawPixel(x0, y0, color);
+ solidcount--;
+ }
+ else if(emptycount)
+ {
+ // Empty pixel ... don't draw anything an decrement counter
+ emptycount--;
+ }
+ else
+ {
+ // Reset counters and draw solid pixel
+ emptycount = empty;
+ solidcount = solid;
+ drawPixel(x0, y0, color);
+ solidcount--;
+ }
+ }
+ }
+ else
+ {
+ int fraction = dx - (dy >> 1);
+ while (y0 != y1)
+ {
+ if (fraction >= 0)
+ {
+ x0 += stepx;
+ fraction -= dy;
+ }
+ y0 += stepy;
+ fraction += dx;
+ if (empty == 0)
+ {
+ // always draw a pixel ... no dotted line requested
+ drawPixel(x0, y0, color);
+ }
+ if (solidcount)
+ {
+ // Draw solid pxiel and decrement counter
+ drawPixel(x0, y0, color);
+ solidcount--;
+ }
+ else if(emptycount)
+ {
+ // Empty pixel ... don't draw anything an decrement counter
+ emptycount--;
+ }
+ else
+ {
+ // Reset counters and draw solid pixel
+ emptycount = empty;
+ solidcount = solid;
+ drawPixel(x0, y0, color);
+ solidcount--;
+ }
+ }
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a circle
+
+ Based on: http://www.cs.unc.edu/~mcmillan/comp136/Lecture7/circle.html
+
+ @param[in] xCenter
+ The horizontal center of the circle
+ @param[in] yCenter
+ The vertical center of the circle
+ @param[in] radius
+ The circle's radius in pixels
+ @param[in] color
+ Color used when drawing
+*/
+/**************************************************************************/
+void drawCircle (uint16_t xCenter, uint16_t yCenter, uint16_t radius, uint16_t color)
+{
+ int x = 0;
+ int y = radius;
+ int p = (5 - radius*4)/4;
+
+ drawCirclePoints(xCenter, yCenter, x, y, color);
+ while (x < y)
+ {
+ x++;
+ if (p < 0)
+ {
+ p += 2*x+1;
+ }
+ else
+ {
+ y--;
+ p += 2*(x-y)+1;
+ }
+ drawCirclePoints(xCenter, yCenter, x, y, color);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a filled circle
+
+ @param[in] xCenter
+ The horizontal center of the circle
+ @param[in] yCenter
+ The vertical center of the circle
+ @param[in] radius
+ The circle's radius in pixels
+ @param[in] color
+ Color used when drawing
+*/
+/**************************************************************************/
+void drawCircleFilled (uint16_t xCenter, uint16_t yCenter, uint16_t radius, uint16_t color)
+{
+ int16_t f = 1 - radius;
+ int16_t ddF_x = 1;
+ int16_t ddF_y = -2 * radius;
+ int16_t x = 0;
+ int16_t y = radius;
+ int16_t xc_px, yc_my, xc_mx, xc_py, yc_mx, xc_my;
+ int16_t lcdWidth = lcdGetWidth();
+
+ if (xCenter < lcdWidth) drawLine(xCenter, yCenter-radius < 0 ? 0 : yCenter-radius, xCenter, (yCenter-radius) + (2*radius), color);
+
+ while (x<y)
+ {
+ if (f >= 0)
+ {
+ y--;
+ ddF_y += 2;
+ f += ddF_y;
+ }
+ x++;
+ ddF_x += 2;
+ f += ddF_x;
+
+ xc_px = xCenter+x;
+ xc_mx = xCenter-x;
+ xc_py = xCenter+y;
+ xc_my = xCenter-y;
+ yc_mx = yCenter-x;
+ yc_my = yCenter-y;
+
+ // Make sure X positions are not negative or too large or the pixels will
+ // overflow. Y overflow is handled in drawLine().
+ if ((xc_px < lcdWidth) && (xc_px >= 0)) drawLine(xc_px, yc_my, xc_px, yc_my + 2*y, color);
+ if ((xc_mx < lcdWidth) && (xc_mx >= 0)) drawLine(xc_mx, yc_my, xc_mx, yc_my + 2*y, color);
+ if ((xc_py < lcdWidth) && (xc_py >= 0)) drawLine(xc_py, yc_mx, xc_py, yc_mx + 2*x, color);
+ if ((xc_my < lcdWidth) && (xc_my >= 0)) drawLine(xc_my, yc_mx, xc_my, yc_mx + 2*x, color);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a simple arrow of the specified width
+
+ @param[in] x
+ X co-ordinate of the smallest point of the arrow
+ @param[in] y
+ Y co-ordinate of the smallest point of the arrow
+ @param[in] size
+ Total width/height of the arrow in pixels
+ @param[in] direction
+ The direction that the arrow is pointing
+ @param[in] color
+ Color used when drawing
+*/
+/**************************************************************************/
+void drawArrow(uint16_t x, uint16_t y, uint16_t size, drawDirection_t direction, uint16_t color)
+{
+ drawPixel(x, y, color);
+
+ if (size == 1)
+ {
+ return;
+ }
+
+ uint32_t i;
+ switch (direction)
+ {
+ case DRAW_DIRECTION_LEFT:
+ for (i = 1; i<size; i++)
+ {
+ drawLine(x+i, y-i, x+i, y+i, color);
+ }
+ break;
+ case DRAW_DIRECTION_RIGHT:
+ for (i = 1; i<size; i++)
+ {
+ drawLine(x-i, y-i, x-i, y+i, color);
+ }
+ break;
+ case DRAW_DIRECTION_UP:
+ for (i = 1; i<size; i++)
+ {
+ drawLine(x-i, y+i, x+i, y+i, color);
+ }
+ break;
+ case DRAW_DIRECTION_DOWN:
+ for (i = 1; i<size; i++)
+ {
+ drawLine(x-i, y-i, x+i, y-i, color);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a simple (empty) rectangle
+
+ @param[in] x0
+ Starting x co-ordinate
+ @param[in] y0
+ Starting y co-ordinate
+ @param[in] x1
+ Ending x co-ordinate
+ @param[in] y1
+ Ending y co-ordinate
+ @param[in] color
+ Color used when drawing
+*/
+/**************************************************************************/
+void drawRectangle ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color)
+{
+ uint16_t x, y;
+
+ if (y1 < y0)
+ {
+ // Switch y1 and y0
+ y = y1;
+ y1 = y0;
+ y0 = y;
+ }
+
+ if (x1 < x0)
+ {
+ // Switch x1 and x0
+ x = x1;
+ x1 = x0;
+ x0 = x;
+ }
+
+ drawLine (x0, y0, x1, y0, color);
+ drawLine (x1, y0, x1, y1, color);
+ drawLine (x1, y1, x0, y1, color);
+ drawLine (x0, y1, x0, y0, color);
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a filled rectangle
+
+ @param[in] x0
+ Starting x co-ordinate
+ @param[in] y0
+ Starting y co-ordinate
+ @param[in] x1
+ Ending x co-ordinate
+ @param[in] y1
+ Ending y co-ordinate
+ @param[in] color
+ Color used when drawing
+*/
+/**************************************************************************/
+void drawRectangleFilled ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color)
+{
+ int height;
+ uint16_t x, y;
+
+ if (y1 < y0)
+ {
+ // Switch y1 and y0
+ y = y1;
+ y1 = y0;
+ y0 = y;
+ }
+
+ if (x1 < x0)
+ {
+ // Switch x1 and x0
+ x = x1;
+ x1 = x0;
+ x0 = x;
+ }
+
+ height = y1 - y0;
+ for (height = y0; y1 > height - 1; ++height)
+ {
+ drawLine(x0, height, x1, height, color);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a filled rectangle with rounded corners
+
+ @param[in] x0
+ Starting x co-ordinate
+ @param[in] y0
+ Starting y co-ordinate
+ @param[in] x1
+ Ending x co-ordinate
+ @param[in] y1
+ Ending y co-ordinate
+ @param[in] color
+ Color used when drawing
+ @param[in] radius
+ Corner radius in pixels
+ @param[in] corners
+ Which corners to round
+*/
+/**************************************************************************/
+void drawRectangleRounded ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color, uint16_t radius, drawRoundedCorners_t corners )
+{
+ int height;
+ uint16_t y;
+
+ if (corners == DRAW_ROUNDEDCORNERS_NONE)
+ {
+ drawRectangleFilled(x0, y0, x1, y1, color);
+ return;
+ }
+
+ // Calculate height
+ if (y1 < y0)
+ {
+ y = y1;
+ y1 = y0;
+ y0 = y;
+ }
+ height = y1 - y0;
+
+ // Check radius
+ if (radius > height / 2)
+ {
+ radius = height / 2;
+ }
+ radius -= 1;
+
+ // Draw body
+ drawRectangleFilled(x0 + radius, y0, x1 - radius, y1, color);
+
+ switch (corners)
+ {
+ case DRAW_ROUNDEDCORNERS_ALL:
+ drawCircleFilled(x0 + radius, y0 + radius, radius, color);
+ drawCircleFilled(x1 - radius, y0 + radius, radius, color);
+ drawCircleFilled(x0 + radius, y1 - radius, radius, color);
+ drawCircleFilled(x1 - radius, y1 - radius, radius, color);
+ if (radius*2+1 < height)
+ {
+ drawRectangleFilled(x0, y0 + radius, x0 + radius, y1 - radius, color);
+ drawRectangleFilled(x1 - radius, y0 + radius, x1, y1 - radius, color);
+ }
+ break;
+ case DRAW_ROUNDEDCORNERS_TOP:
+ drawCircleFilled(x0 + radius, y0 + radius, radius, color);
+ drawCircleFilled(x1 - radius, y0 + radius, radius, color);
+ drawRectangleFilled(x0, y0 + radius, x0 + radius, y1, color);
+ drawRectangleFilled(x1 - radius, y0 + radius, x1, y1, color);
+ break;
+ case DRAW_ROUNDEDCORNERS_BOTTOM:
+ drawCircleFilled(x0 + radius, y1 - radius, radius, color);
+ drawCircleFilled(x1 - radius, y1 - radius, radius, color);
+ drawRectangleFilled(x0, y0, x0 + radius, y1 - radius, color);
+ drawRectangleFilled(x1 - radius, y0, x1, y1 - radius, color);
+ break;
+ case DRAW_ROUNDEDCORNERS_LEFT:
+ drawCircleFilled(x0 + radius, y0 + radius, radius, color);
+ drawCircleFilled(x0 + radius, y1 - radius, radius, color);
+ if (radius*2+1 < height)
+ {
+ drawRectangleFilled(x0, y0 + radius, x0 + radius, y1 - radius, color);
+ }
+ drawRectangleFilled(x1 - radius, y0, x1, y1, color);
+ break;
+ case DRAW_ROUNDEDCORNERS_RIGHT:
+ drawCircleFilled(x1 - radius, y0 + radius, radius, color);
+ drawCircleFilled(x1 - radius, y1 - radius, radius, color);
+ if (radius*2+1 < height)
+ {
+ drawRectangleFilled(x1 - radius, y0 + radius, x1, y1 - radius, color);
+ }
+ drawRectangleFilled(x0, y0, x0 + radius, y1, color);
+ break;
+ default:
+ break;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Converts a 24-bit RGB color to an equivalent 16-bit RGB565 value
+
+ @param[in] r
+ 8-bit red
+ @param[in] g
+ 8-bit green
+ @param[in] b
+ 8-bit blue
+
+ @section Example
+
+ @code
+
+ // Get 16-bit equivalent of 24-bit color
+ uint16_t gray = drawRGB24toRGB565(0x33, 0x33, 0x33);
+
+ @endcode
+*/
+/**************************************************************************/
+uint16_t drawRGB24toRGB565(uint8_t r, uint8_t g, uint8_t b)
+{
+ return ((r / 8) << 11) | ((g / 4) << 5) | (b / 8);
+}
+
+/**************************************************************************/
+/*!
+ @brief Converts a 16-bit RGB565 color to a standard 32-bit BGRA32
+ color (with alpha set to 0xFF)
+
+ @param[in] color
+ 16-bit rgb565 color
+
+ @section Example
+
+ @code
+
+ // First convert 24-bit color to RGB565
+ uint16_t rgb565 = drawRGB24toRGB565(0xFF, 0x00, 0x00);
+
+ // Convert RGB565 color back to BGRA32
+ uint32_t bgra32 = drawRGB565toBGRA32(rgb565);
+
+ // Display results
+ printf("BGRA32: 0x%08X R: %u G: %u B: %u A: %u \r\n",
+ bgra32,
+ (bgra32 & 0x000000FF), // Blue
+ (bgra32 & 0x0000FF00) >> 8, // Green
+ (bgra32 & 0x00FF0000) >> 16, // Red
+ (bgra32 & 0xFF000000) >> 24); // Alpha
+
+ @endcode
+*/
+/**************************************************************************/
+uint32_t drawRGB565toBGRA32(uint16_t color)
+{
+ uint32_t bits = (uint32_t)color;
+ uint32_t blue = bits & 0x001F; // 5 bits blue
+ uint32_t green = bits & 0x07E0; // 6 bits green
+ uint32_t red = bits & 0xF800; // 5 bits red
+
+ // Return shifted bits with alpha set to 0xFF
+ return (red << 8) | (green << 5) | (blue << 3) | 0xFF000000;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reverses a 16-bit color from BGR to RGB
+*/
+/**************************************************************************/
+uint16_t drawBGR2RGB(uint16_t color)
+{
+ uint16_t r, g, b;
+
+ b = (color>>0) & 0x1f;
+ g = (color>>5) & 0x3f;
+ r = (color>>11) & 0x1f;
+
+ return( (b<<11) + (g<<5) + (r<<0) );
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a progress bar with rounded corners
+
+ @param[in] x
+ Starting x location
+ @param[in] y
+ Starting y location
+ @param[in] width
+ Total width of the progress bar in pixels
+ @param[in] height
+ Total height of the progress bar in pixels
+ @param[in] borderCorners
+ The type of rounded corners to render with the progress bar border
+ @param[in] progressCorners
+ The type of rounded corners to render with the inner progress bar
+ @param[in] borderColor
+ 16-bit color for the outer border
+ @param[in] borderFillColor
+ 16-bit color for the interior of the outer border
+ @param[in] progressBorderColor
+ 16-bit color for the progress bar's border
+ @param[in] progressFillColor
+ 16-bit color for the inner bar's fill
+ @param[in] progress
+ Progress percentage (between 0 and 100)
+
+ @section Example
+
+ @code
+ #include "drivers/lcd/tft/drawing.h"
+
+ // Draw a the progress bar (150x15 pixels large, starting at X:10, Y:195
+ // with rounded corners on the top and showing 72% progress)
+ drawProgressBar(10, 195, 150, 15, DRAW_ROUNDEDCORNERS_TOP, DRAW_ROUNDEDCORNERS_TOP, COLOR_DARKERGRAY, COLOR_DARKGRAY, COLOR_LIMEGREENDIM, COLOR_LIMEGREEN, 72 );
+
+ @endcode
+*/
+/**************************************************************************/
+void drawProgressBar ( uint16_t x, uint16_t y, uint16_t width, uint16_t height, drawRoundedCorners_t borderCorners, drawRoundedCorners_t progressCorners, uint16_t borderColor, uint16_t borderFillColor, uint16_t progressBorderColor, uint16_t progressFillColor, uint8_t progress )
+{
+ // Draw border with rounded corners
+ drawRectangleRounded(x, y, x + width, y + height, borderColor, 5, borderCorners);
+ drawRectangleRounded(x+1, y+1, x + width - 1, y + height - 1, borderFillColor, 5, borderCorners);
+
+ // Progress bar
+ if (progress > 0 && progress <= 100)
+ {
+ // Calculate bar size
+ uint16_t bw;
+ bw = (width - 6); // bar at 100%
+ if (progress != 100)
+ {
+ bw = (bw * progress) / 100;
+ }
+ drawRectangleRounded(x + 3, y + 3, bw + x + 3, y + height - 3, progressBorderColor, 5, progressCorners);
+ drawRectangleRounded(x + 4, y + 4, bw + x + 3 - 1, y + height - 4, progressFillColor, 5, progressCorners);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a simple button
+
+ @param[in] x
+ Starting x location
+ @param[in] y
+ Starting y location
+ @param[in] width
+ Total width of the button in pixels
+ @param[in] height
+ Total height of the button in pixels
+ @param[in] fontInfo
+ Pointer to the FONT_INFO used to render the button text
+ @param[in] fontHeight
+ The height in pixels of the font (used for centering)
+ @param[in] borderclr
+ The rgb565 border color
+ @param[in] fillclr
+ The rgb565 background color
+ @param[in] fontclr
+ The rgb565 font color
+ @param[in] text
+ The text to render on the button
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/tft/drawing.h"
+ #include "drivers/lcd/tft/fonts/dejavusansbold9.h"
+
+ // Draw two buttons using Vera Sans Bold 9
+ drawButton(20, 195, 200, 35, &dejaVuSansBold9ptFontInfo, 7, COLOR_DARKERGRAY, COLOR_DARKERGRAY, COLOR_WHITE, "System Settings");
+ drawButton(20, 235, 200, 35, &dejaVuSansBold9ptFontInfo, 7, COLOR_LIMEGREENDIM, COLOR_LIMEGREEN, COLOR_BLACK, "System Settings");
+
+ @endcode
+*/
+/**************************************************************************/
+void drawButton(uint16_t x, uint16_t y, uint16_t width, uint16_t height, const FONT_INFO *fontInfo, uint16_t fontHeight, uint16_t borderclr, uint16_t fillclr, uint16_t fontclr, char* text)
+{
+ uint16_t border, fill, font, activeborder, activefill, activefont;
+
+ // Set colors
+ border = COLOR_GRAY_30;
+ fill = COLOR_GRAY_30;
+ font = COLOR_WHITE;
+ activeborder = COLOR_THEME_DEFAULT_DARKER;
+ activefill = COLOR_THEME_DEFAULT_BASE;
+ activefont = COLOR_BLACK;
+
+ // Border
+ drawRectangleRounded(x, y, x + width, y + height, borderclr, 5, DRAW_ROUNDEDCORNERS_ALL);
+ // Fill
+ drawRectangleRounded(x+2, y+2, x+width-2, y+height-2, fillclr, 5, DRAW_ROUNDEDCORNERS_ALL);
+
+ // Render text
+ if (text != NULL)
+ {
+ uint16_t textWidth = drawGetStringWidth(&*fontInfo, text);
+ uint16_t xStart = x + (width / 2) - (textWidth / 2);
+ uint16_t yStart = y + (height / 2) - (fontHeight / 2) + 1;
+ drawString(xStart, yStart, fontclr, &*fontInfo, text);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Renders a 16x16 monochrome icon using the supplied uint16_t
+ array.
+
+ @param[in] x
+ The horizontal location to start rendering from
+ @param[in] x
+ The vertical location to start rendering from
+ @param[in] color
+ The RGB565 color to use when rendering the icon
+ @param[in] icon
+ The uint16_t array containing the 16x16 image data
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/tft/drawing.h"
+ #include "drivers/lcd/icons16.h"
+
+ // Renders the info icon, which has two seperate parts ... the exterior
+ // and a seperate interior mask if you want to fill the contents with a
+ // different color
+ drawIcon16(132, 202, COLOR_BLUE, icons16_info);
+ drawIcon16(132, 202, COLOR_WHITE, icons16_info_interior);
+
+ @endcode
+*/
+/**************************************************************************/
+void drawIcon16(uint16_t x, uint16_t y, uint16_t color, uint16_t icon[])
+{
+ int i;
+ uint16_t row;
+ for (i = 0; i<16; i++)
+ {
+ if (icon[i] & (0X8000)) drawPixel(x, y+i, color);
+ if (icon[i] & (0X4000)) drawPixel(x+1, y+i, color);
+ if (icon[i] & (0X2000)) drawPixel(x+2, y+i, color);
+ if (icon[i] & (0X1000)) drawPixel(x+3, y+i, color);
+ if (icon[i] & (0X0800)) drawPixel(x+4, y+i, color);
+ if (icon[i] & (0X0400)) drawPixel(x+5, y+i, color);
+ if (icon[i] & (0X0200)) drawPixel(x+6, y+i, color);
+ if (icon[i] & (0X0100)) drawPixel(x+7, y+i, color);
+ if (icon[i] & (0X0080)) drawPixel(x+8, y+i, color);
+ if (icon[i] & (0x0040)) drawPixel(x+9, y+i, color);
+ if (icon[i] & (0X0020)) drawPixel(x+10, y+i, color);
+ if (icon[i] & (0X0010)) drawPixel(x+11, y+i, color);
+ if (icon[i] & (0X0008)) drawPixel(x+12, y+i, color);
+ if (icon[i] & (0X0004)) drawPixel(x+13, y+i, color);
+ if (icon[i] & (0X0002)) drawPixel(x+14, y+i, color);
+ if (icon[i] & (0X0001)) drawPixel(x+15, y+i, color);
+ }
+}
+
+#ifdef CFG_SDCARD
+/**************************************************************************/
+/*!
+ @brief Loads a 24-bit Windows bitmap image from an SD card and
+ renders it
+
+ @section Example
+
+ @code
+
+ #include "drivers/lcd/tft/drawing.h"
+
+ // Draw image.bmp (from the root folder) starting at pixel 0,0
+ bmp_error_t error = drawBitmapImage(0, 0, "/image.bmp");
+
+ if (error)
+ {
+ switch (error)
+ {
+ case BMP_ERROR_SDINITFAIL:
+ break;
+ case BMP_ERROR_FILENOTFOUND:
+ break;
+ case BMP_ERROR_NOTABITMAP:
+ // First two bytes of image not 'BM'
+ break;
+ case BMP_ERROR_INVALIDBITDEPTH:
+ // Image is not 24-bits
+ break;
+ case BMP_ERROR_COMPRESSEDDATA:
+ // Image contains compressed data
+ break;
+ case BMP_ERROR_INVALIDDIMENSIONS:
+ // Width or Height is > LCD size
+ break;
+ case BMP_ERROR_PREMATUREEOF:
+ // EOF unexpectedly reached in pixel data
+ break;
+ }
+ }
+
+ @endcode
+*/
+/**************************************************************************/
+bmp_error_t drawBitmapImage(uint16_t x, uint16_t y, char *filename)
+{
+ return bmpDrawBitmap(x, y, filename);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file drawing.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __DRAWING_H__
+#define __DRAWING_H__
+
+#include "projectconfig.h"
+#include "lcd.h"
+#include "colors.h"
+#include "drivers/lcd/tft/fonts/bitmapfonts.h"
+
+#if defined CFG_TFTLCD_INCLUDESMALLFONTS & CFG_TFTLCD_INCLUDESMALLFONTS == 1
+ #include "drivers/lcd/smallfonts.h"
+#endif
+
+#ifdef CFG_SDCARD
+ #include "bmp.h"
+#endif
+
+typedef struct
+{
+ uint8_t red;
+ uint8_t green;
+ uint8_t blue;
+} drawColorRGB24_t;
+
+typedef enum
+{
+ DRAW_ROUNDEDCORNERS_NONE,
+ DRAW_ROUNDEDCORNERS_ALL,
+ DRAW_ROUNDEDCORNERS_TOP,
+ DRAW_ROUNDEDCORNERS_BOTTOM,
+ DRAW_ROUNDEDCORNERS_LEFT,
+ DRAW_ROUNDEDCORNERS_RIGHT
+} drawRoundedCorners_t;
+
+typedef enum
+{
+ DRAW_DIRECTION_LEFT,
+ DRAW_DIRECTION_RIGHT,
+ DRAW_DIRECTION_UP,
+ DRAW_DIRECTION_DOWN
+} drawDirection_t;
+
+void drawTestPattern ( void );
+void drawPixel ( uint16_t x, uint16_t y, uint16_t color );
+void drawFill ( uint16_t color );
+void drawLine ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color );
+void drawLineDotted ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t space, uint16_t solid, uint16_t color );
+void drawCircle ( uint16_t xCenter, uint16_t yCenter, uint16_t radius, uint16_t color );
+void drawCircleFilled ( uint16_t xCenter, uint16_t yCenter, uint16_t radius, uint16_t color );
+void drawArrow ( uint16_t x, uint16_t y, uint16_t size, drawDirection_t, uint16_t color );
+void drawRectangle ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color );
+void drawRectangleFilled ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color );
+void drawRectangleRounded ( uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint16_t color, uint16_t radius, drawRoundedCorners_t corners );
+void drawString ( uint16_t x, uint16_t y, uint16_t color, const FONT_INFO *fontInfo, char *str );
+uint16_t drawGetStringWidth ( const FONT_INFO *fontInfo, char *str );
+void drawProgressBar ( uint16_t x, uint16_t y, uint16_t width, uint16_t height, drawRoundedCorners_t borderCorners, drawRoundedCorners_t progressCorners, uint16_t borderColor, uint16_t borderFillColor, uint16_t progressBorderColor, uint16_t progressFillColor, uint8_t progress );
+void drawButton ( uint16_t x, uint16_t y, uint16_t width, uint16_t height, const FONT_INFO *fontInfo, uint16_t fontHeight, uint16_t borderclr, uint16_t fillclr, uint16_t fontclr, char* text );
+void drawIcon16 ( uint16_t x, uint16_t y, uint16_t color, uint16_t icon[] );
+uint16_t drawRGB24toRGB565 ( uint8_t r, uint8_t g, uint8_t b );
+uint32_t drawRGB565toBGRA32 ( uint16_t color );
+uint16_t drawBGR2RGB ( uint16_t color );
+
+#if defined CFG_TFTLCD_INCLUDESMALLFONTS & CFG_TFTLCD_INCLUDESMALLFONTS == 1
+void drawStringSmall ( uint16_t x, uint16_t y, uint16_t color, char* text, struct FONT_DEF font );
+#endif
+
+#if defined CFG_SDCARD
+bmp_error_t drawBitmapImage ( uint16_t x, uint16_t y, char *filename );
+#endif
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file bitmapfonts.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __BITMAPFONTS_H__
+#define __BITMAPFONTS_H__
+
+#include "projectconfig.h"
+
+/**************************************************************************/
+/*!
+ @brief Describes a single character's display information
+*/
+/**************************************************************************/
+typedef struct
+{
+ const uint8_t widthBits; // width, in bits (or pixels), of the character
+ const uint16_t offset; // offset of the character's bitmap, in bytes, into the the FONT_INFO's data array
+} FONT_CHAR_INFO;
+
+/**************************************************************************/
+/*!
+ @brief Describes a single font
+*/
+/**************************************************************************/
+typedef struct
+{
+ const uint8_t heightPages; // height, in pages (8 pixels), of the font's characters
+ const uint8_t startChar; // the first character in the font (e.g. in charInfo and data)
+ const FONT_CHAR_INFO* charInfo; // pointer to array of char information
+ const uint8_t* data; // pointer to generated array of character visual representation
+} FONT_INFO;
+
+#endif
--- /dev/null
+#include "dejavusans9.h"
+
+/*
+** Font data for DejaVu Sans 9pt
+*/
+
+/* Character bitmaps for DejaVu Sans 9pt */
+const uint8_t dejaVuSans9ptCharBitmaps[] =
+{
+ /* @0 ' ' (5 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @10 '!' (1 pixels wide) */
+ 0x1B, 0xF0, /* ## ###### */
+
+ /* @12 '"' (3 pixels wide) */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x70, /* ### */
+
+ /* @18 '#' (8 pixels wide) */
+ 0x04, 0x00, /* # */
+ 0x14, 0x80, /* # # # */
+ 0x0F, 0x80, /* ##### */
+ 0x04, 0xE0, /* # ### */
+ 0x1C, 0x80, /* ### # */
+ 0x07, 0xC0, /* ##### */
+ 0x04, 0xA0, /* # # # */
+ 0x00, 0x80, /* # */
+
+ /* @34 '$' (5 pixels wide) */
+ 0x09, 0xC0, /* # ### */
+ 0x11, 0x20, /* # # # */
+ 0x7F, 0xF0, /* ########### */
+ 0x12, 0x20, /* # # # */
+ 0x0E, 0x40, /* ### # */
+
+ /* @44 '%' (10 pixels wide) */
+ 0x00, 0xE0, /* ### */
+ 0x01, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x0C, 0xE0, /* ## ### */
+ 0x03, 0x00, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x0E, 0x60, /* ### ## */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x00, /* # # */
+ 0x0E, 0x00, /* ### */
+
+ /* @64 '&' (8 pixels wide) */
+ 0x0E, 0x00, /* ### */
+ 0x19, 0xE0, /* ## #### */
+ 0x10, 0x90, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x12, 0x20, /* # # # */
+ 0x0C, 0x00, /* ## */
+ 0x14, 0x00, /* # # */
+ 0x13, 0x00, /* # ## */
+
+ /* @80 ''' (1 pixels wide) */
+ 0x00, 0x70, /* ### */
+
+ /* @82 '(' (3 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x38, 0x38, /* ### ### */
+ 0x20, 0x08, /* # # */
+
+ /* @88 ')' (3 pixels wide) */
+ 0x20, 0x08, /* # # */
+ 0x38, 0x38, /* ### ### */
+ 0x07, 0xC0, /* ##### */
+
+ /* @94 '*' (5 pixels wide) */
+ 0x01, 0x20, /* # # */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0xF0, /* ###### */
+ 0x00, 0xC0, /* ## */
+ 0x01, 0x20, /* # # */
+
+ /* @104 '+' (7 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+
+ /* @118 ',' (1 pixels wide) */
+ 0x38, 0x00, /* ### */
+
+ /* @120 '-' (3 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+
+ /* @126 '.' (1 pixels wide) */
+ 0x18, 0x00, /* ## */
+
+ /* @128 '/' (4 pixels wide) */
+ 0x30, 0x00, /* ## */
+ 0x0E, 0x00, /* ### */
+ 0x01, 0xC0, /* ### */
+ 0x00, 0x30, /* ## */
+
+ /* @136 '0' (6 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x18, 0x30, /* ## ## */
+ 0x07, 0xC0, /* ##### */
+
+ /* @148 '1' (5 pixels wide) */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+
+ /* @158 '2' (6 pixels wide) */
+ 0x10, 0x20, /* # # */
+ 0x18, 0x10, /* ## # */
+ 0x14, 0x10, /* # # # */
+ 0x12, 0x10, /* # # # */
+ 0x11, 0x30, /* # # ## */
+ 0x10, 0xE0, /* # ### */
+
+ /* @170 '3' (6 pixels wide) */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0E, 0xE0, /* ### ### */
+
+ /* @182 '4' (6 pixels wide) */
+ 0x06, 0x00, /* ## */
+ 0x05, 0x80, /* # ## */
+ 0x04, 0x40, /* # # */
+ 0x04, 0x30, /* # ## */
+ 0x1F, 0xF0, /* ######### */
+ 0x04, 0x00, /* # */
+
+ /* @194 '5' (6 pixels wide) */
+ 0x08, 0xF0, /* # #### */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x19, 0x90, /* ## ## # */
+ 0x0F, 0x00, /* #### */
+
+ /* @206 '6' (6 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x19, 0x20, /* ## # # */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x19, 0x90, /* ## ## # */
+ 0x0F, 0x20, /* #### # */
+
+ /* @218 '7' (6 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x10, 0x10, /* # # */
+ 0x0C, 0x10, /* ## # */
+ 0x03, 0x10, /* ## # */
+ 0x00, 0xD0, /* ## # */
+ 0x00, 0x30, /* ## */
+
+ /* @230 '8' (6 pixels wide) */
+ 0x0E, 0xE0, /* ### ### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0E, 0xE0, /* ### ### */
+
+ /* @242 '9' (6 pixels wide) */
+ 0x09, 0xE0, /* # #### */
+ 0x13, 0x30, /* # ## ## */
+ 0x12, 0x10, /* # # # */
+ 0x12, 0x10, /* # # # */
+ 0x09, 0x30, /* # # ## */
+ 0x07, 0xC0, /* ##### */
+
+ /* @254 ':' (1 pixels wide) */
+ 0x19, 0x80, /* ## ## */
+
+ /* @256 ';' (1 pixels wide) */
+ 0x39, 0x80, /* ### ## */
+
+ /* @258 '<' (8 pixels wide) */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x0C, 0xC0, /* ## ## */
+ 0x08, 0x40, /* # # */
+
+ /* @274 '=' (8 pixels wide) */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+
+ /* @290 '>' (8 pixels wide) */
+ 0x08, 0x40, /* # # */
+ 0x0C, 0xC0, /* ## ## */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+
+ /* @306 '?' (5 pixels wide) */
+ 0x00, 0x20, /* # */
+ 0x00, 0x10, /* # */
+ 0x1B, 0x10, /* ## ## # */
+ 0x00, 0x90, /* # # */
+ 0x00, 0x60, /* ## */
+
+ /* @316 '@' (11 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x10, 0x40, /* # # */
+ 0x20, 0x20, /* # # */
+ 0x47, 0x10, /* # ### # */
+ 0x48, 0x90, /* # # # # */
+ 0x48, 0x90, /* # # # # */
+ 0x48, 0x90, /* # # # # */
+ 0x4F, 0x90, /* # ##### # */
+ 0x28, 0x20, /* # # # */
+ 0x04, 0x60, /* # ## */
+ 0x03, 0x80, /* ### */
+
+ /* @338 'A' (8 pixels wide) */
+ 0x10, 0x00, /* # */
+ 0x0E, 0x00, /* ### */
+ 0x05, 0xC0, /* # ### */
+ 0x04, 0x30, /* # ## */
+ 0x04, 0x30, /* # ## */
+ 0x05, 0xC0, /* # ### */
+ 0x0E, 0x00, /* ### */
+ 0x10, 0x00, /* # */
+
+ /* @354 'B' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0E, 0xE0, /* ### ### */
+
+ /* @366 'C' (6 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x08, 0x20, /* # # */
+
+ /* @378 'D' (7 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x08, 0x20, /* # # */
+ 0x07, 0xC0, /* ##### */
+
+ /* @392 'E' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+
+ /* @404 'F' (5 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+
+ /* @414 'G' (7 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0F, 0x20, /* #### # */
+
+ /* @428 'H' (7 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @442 'I' (1 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @444 'J' (3 pixels wide) */
+ 0x40, 0x00, /* # */
+ 0x40, 0x00, /* # */
+ 0x3F, 0xF0, /* ########## */
+
+ /* @450 'K' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x02, 0x80, /* # # */
+ 0x04, 0x40, /* # # */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+
+ /* @462 'L' (5 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+
+ /* @472 'M' (8 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x60, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x60, /* ## */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @488 'N' (7 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x30, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x01, 0x00, /* # */
+ 0x06, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @502 'O' (7 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x08, 0x20, /* # # */
+ 0x07, 0xC0, /* ##### */
+
+ /* @516 'P' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x00, 0xE0, /* ### */
+
+ /* @528 'Q' (7 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x30, 0x10, /* ## # */
+ 0x48, 0x20, /* # # # */
+ 0x07, 0xC0, /* ##### */
+
+ /* @542 'R' (7 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x03, 0x10, /* ## # */
+ 0x0C, 0xE0, /* ## ### */
+ 0x10, 0x00, /* # */
+
+ /* @556 'S' (6 pixels wide) */
+ 0x08, 0xE0, /* # ### */
+ 0x11, 0x90, /* # ## # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0E, 0x20, /* ### # */
+
+ /* @568 'T' (7 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+
+ /* @582 'U' (7 pixels wide) */
+ 0x0F, 0xF0, /* ######## */
+ 0x18, 0x00, /* ## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x18, 0x00, /* ## */
+ 0x0F, 0xF0, /* ######## */
+
+ /* @596 'V' (8 pixels wide) */
+ 0x00, 0x30, /* ## */
+ 0x01, 0xC0, /* ### */
+ 0x06, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x01, 0xC0, /* ### */
+ 0x00, 0x30, /* ## */
+
+ /* @612 'W' (11 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0xE0, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x80, /* #### */
+ 0x00, 0x70, /* ### */
+ 0x07, 0x80, /* #### */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x10, /* # */
+
+ /* @634 'X' (7 pixels wide) */
+ 0x10, 0x10, /* # # */
+ 0x08, 0x30, /* # ## */
+ 0x06, 0xC0, /* ## ## */
+ 0x01, 0x00, /* # */
+ 0x06, 0xC0, /* ## ## */
+ 0x08, 0x30, /* # ## */
+ 0x10, 0x10, /* # # */
+
+ /* @648 'Y' (7 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x60, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x1E, 0x00, /* #### */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x10, /* # */
+
+ /* @662 'Z' (7 pixels wide) */
+ 0x18, 0x10, /* ## # */
+ 0x14, 0x10, /* # # # */
+ 0x12, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x50, /* # # # */
+ 0x10, 0x30, /* # ## */
+
+ /* @676 '[' (2 pixels wide) */
+ 0x7F, 0xF0, /* ########### */
+ 0x40, 0x10, /* # # */
+
+ /* @680 '\' (4 pixels wide) */
+ 0x00, 0x30, /* ## */
+ 0x01, 0xC0, /* ### */
+ 0x0E, 0x00, /* ### */
+ 0x30, 0x00, /* ## */
+
+ /* @688 ']' (2 pixels wide) */
+ 0x40, 0x10, /* # # */
+ 0x7F, 0xF0, /* ########### */
+
+ /* @692 '^' (6 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x40, /* # */
+
+ /* @704 '_' (6 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+
+ /* @716 '`' (2 pixels wide) */
+ 0x00, 0x08, /* # */
+ 0x00, 0x10, /* # */
+
+ /* @720 'a' (6 pixels wide) */
+ 0x0C, 0x80, /* ## # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x0A, 0x40, /* # # # */
+ 0x1F, 0x80, /* ###### */
+
+ /* @732 'b' (6 pixels wide) */
+ 0x1F, 0xF8, /* ########## */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x18, 0xC0, /* ## ## */
+ 0x0F, 0x80, /* ##### */
+
+ /* @744 'c' (5 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x08, 0x80, /* # # */
+
+ /* @754 'd' (6 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x18, 0xC0, /* ## ## */
+ 0x1F, 0xF8, /* ########## */
+
+ /* @766 'e' (6 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x0A, 0xC0, /* # # ## */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0xC0, /* # # ## */
+ 0x0B, 0x80, /* # ### */
+
+ /* @778 'f' (4 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x48, /* # # */
+ 0x00, 0x48, /* # # */
+
+ /* @786 'g' (6 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x58, 0xC0, /* # ## ## */
+ 0x90, 0x40, /* # # # */
+ 0x90, 0x40, /* # # # */
+ 0xD8, 0xC0, /* ## ## ## */
+ 0x7F, 0xC0, /* ######### */
+
+ /* @798 'h' (6 pixels wide) */
+ 0x1F, 0xF8, /* ########## */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0x80, /* ###### */
+
+ /* @810 'i' (1 pixels wide) */
+ 0x1F, 0xD0, /* ####### # */
+
+ /* @812 'j' (2 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0xFF, 0xD0, /* ########## # */
+
+ /* @816 'k' (5 pixels wide) */
+ 0x1F, 0xF8, /* ########## */
+ 0x02, 0x00, /* # */
+ 0x05, 0x00, /* # # */
+ 0x08, 0x80, /* # # */
+ 0x10, 0x40, /* # # */
+
+ /* @826 'l' (1 pixels wide) */
+ 0x1F, 0xF8, /* ########## */
+
+ /* @828 'm' (9 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0x80, /* ###### */
+
+ /* @846 'n' (6 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0x80, /* ###### */
+
+ /* @858 'o' (6 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x18, 0xC0, /* ## ## */
+ 0x0F, 0x80, /* ##### */
+
+ /* @870 'p' (6 pixels wide) */
+ 0xFF, 0xC0, /* ########## */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x18, 0xC0, /* ## ## */
+ 0x0F, 0x80, /* ##### */
+
+ /* @882 'q' (6 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x18, 0xC0, /* ## ## */
+ 0xFF, 0xC0, /* ########## */
+
+ /* @894 'r' (4 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+
+ /* @902 's' (5 pixels wide) */
+ 0x09, 0x80, /* # ## */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x0C, 0x80, /* ## # */
+
+ /* @912 't' (4 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+
+ /* @920 'u' (6 pixels wide) */
+ 0x0F, 0xC0, /* ###### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x1F, 0xC0, /* ####### */
+
+ /* @932 'v' (6 pixels wide) */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+
+ /* @944 'w' (9 pixels wide) */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+
+ /* @962 'x' (6 pixels wide) */
+ 0x10, 0x40, /* # # */
+ 0x0D, 0x80, /* ## ## */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x0D, 0x80, /* ## ## */
+ 0x10, 0x40, /* # # */
+
+ /* @974 'y' (6 pixels wide) */
+ 0x80, 0xC0, /* # ## */
+ 0x83, 0x00, /* # ## */
+ 0x4C, 0x00, /* # ## */
+ 0x38, 0x00, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+
+ /* @986 'z' (5 pixels wide) */
+ 0x18, 0x40, /* ## # */
+ 0x14, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x11, 0x40, /* # # # */
+ 0x10, 0xC0, /* # ## */
+
+ /* @996 '{' (5 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x7D, 0xF0, /* ##### ##### */
+ 0x40, 0x10, /* # # */
+ 0x40, 0x10, /* # # */
+
+ /* @1006 '|' (1 pixels wide) */
+ 0xFF, 0xF0, /* ############ */
+
+ /* @1008 '}' (5 pixels wide) */
+ 0x40, 0x10, /* # # */
+ 0x40, 0x10, /* # # */
+ 0x7D, 0xF0, /* ##### ##### */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+
+ /* @1018 '~' (8 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x01, 0x00, /* # */
+};
+
+/* Character descriptors for DejaVu Sans 9pt */
+/* { [Char width in bits], [Offset into dejaVuSans9ptCharBitmaps in bytes] } */
+const FONT_CHAR_INFO dejaVuSans9ptCharDescriptors[] =
+{
+ {5, 0}, /* */
+ {1, 10}, /* ! */
+ {3, 12}, /* " */
+ {8, 18}, /* # */
+ {5, 34}, /* $ */
+ {10, 44}, /* % */
+ {8, 64}, /* & */
+ {1, 80}, /* ' */
+ {3, 82}, /* ( */
+ {3, 88}, /* ) */
+ {5, 94}, /* * */
+ {7, 104}, /* + */
+ {1, 118}, /* , */
+ {3, 120}, /* - */
+ {1, 126}, /* . */
+ {4, 128}, /* / */
+ {6, 136}, /* 0 */
+ {5, 148}, /* 1 */
+ {6, 158}, /* 2 */
+ {6, 170}, /* 3 */
+ {6, 182}, /* 4 */
+ {6, 194}, /* 5 */
+ {6, 206}, /* 6 */
+ {6, 218}, /* 7 */
+ {6, 230}, /* 8 */
+ {6, 242}, /* 9 */
+ {1, 254}, /* : */
+ {1, 256}, /* ; */
+ {8, 258}, /* < */
+ {8, 274}, /* = */
+ {8, 290}, /* > */
+ {5, 306}, /* ? */
+ {11, 316}, /* @ */
+ {8, 338}, /* A */
+ {6, 354}, /* B */
+ {6, 366}, /* C */
+ {7, 378}, /* D */
+ {6, 392}, /* E */
+ {5, 404}, /* F */
+ {7, 414}, /* G */
+ {7, 428}, /* H */
+ {1, 442}, /* I */
+ {3, 444}, /* J */
+ {6, 450}, /* K */
+ {5, 462}, /* L */
+ {8, 472}, /* M */
+ {7, 488}, /* N */
+ {7, 502}, /* O */
+ {6, 516}, /* P */
+ {7, 528}, /* Q */
+ {7, 542}, /* R */
+ {6, 556}, /* S */
+ {7, 568}, /* T */
+ {7, 582}, /* U */
+ {8, 596}, /* V */
+ {11, 612}, /* W */
+ {7, 634}, /* X */
+ {7, 648}, /* Y */
+ {7, 662}, /* Z */
+ {2, 676}, /* [ */
+ {4, 680}, /* \ */
+ {2, 688}, /* ] */
+ {6, 692}, /* ^ */
+ {6, 704}, /* _ */
+ {2, 716}, /* ` */
+ {6, 720}, /* a */
+ {6, 732}, /* b */
+ {5, 744}, /* c */
+ {6, 754}, /* d */
+ {6, 766}, /* e */
+ {4, 778}, /* f */
+ {6, 786}, /* g */
+ {6, 798}, /* h */
+ {1, 810}, /* i */
+ {2, 812}, /* j */
+ {5, 816}, /* k */
+ {1, 826}, /* l */
+ {9, 828}, /* m */
+ {6, 846}, /* n */
+ {6, 858}, /* o */
+ {6, 870}, /* p */
+ {6, 882}, /* q */
+ {4, 894}, /* r */
+ {5, 902}, /* s */
+ {4, 912}, /* t */
+ {6, 920}, /* u */
+ {6, 932}, /* v */
+ {9, 944}, /* w */
+ {6, 962}, /* x */
+ {6, 974}, /* y */
+ {5, 986}, /* z */
+ {5, 996}, /* { */
+ {1, 1006}, /* | */
+ {5, 1008}, /* } */
+ {8, 1018}, /* ~ */
+};
+
+/* Font information for DejaVu Sans 9pt */
+const FONT_INFO dejaVuSans9ptFontInfo =
+{
+ 2, /* Character height */
+ ' ', /* Start character */
+ dejaVuSans9ptCharDescriptors, /* Character decriptor array */
+ dejaVuSans9ptCharBitmaps, /* Character bitmap array */
+};
--- /dev/null
+#ifndef __DEJA_VU_SANS_9__
+#define __DEJA_VU_SANS_9__
+
+#include "bitmapfonts.h"
+
+extern const uint8_t dejaVuSans9ptCharBitmaps[];
+extern const FONT_CHAR_INFO dejaVuSans9ptCharDescriptors[];
+extern const FONT_INFO dejaVuSans9ptFontInfo;
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "dejavusansbold9.h"
+
+/*
+** Font data for DejaVu Sans Bold 9pt
+*/
+
+/* Character bitmaps for DejaVu Sans Bold 9pt */
+const uint8_t dejaVuSansBold9ptCharBitmaps[] =
+{
+ /* @0 ' ' (5 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @10 '!' (2 pixels wide) */
+ 0x1B, 0xF0, /* ## ###### */
+ 0x1B, 0xF0, /* ## ###### */
+
+ /* @14 '"' (3 pixels wide) */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x70, /* ### */
+
+ /* @20 '#' (8 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x1E, 0x40, /* #### # */
+ 0x0F, 0xC0, /* ###### */
+ 0x02, 0x70, /* # ### */
+ 0x1E, 0x40, /* #### # */
+ 0x03, 0xE0, /* ##### */
+ 0x02, 0x70, /* # ### */
+ 0x00, 0x40, /* # */
+
+ /* @36 '$' (7 pixels wide) */
+ 0x11, 0xC0, /* # ### */
+ 0x13, 0xE0, /* # ##### */
+ 0x13, 0xA0, /* # ### # */
+ 0x7F, 0xF0, /* ########### */
+ 0x17, 0x20, /* # ### # */
+ 0x1F, 0x20, /* ##### # */
+ 0x0E, 0x00, /* ### */
+
+ /* @50 '%' (11 pixels wide) */
+ 0x00, 0xE0, /* ### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x19, 0x10, /* ## # # */
+ 0x06, 0xE0, /* ## ### */
+ 0x03, 0x80, /* ### */
+ 0x0E, 0xC0, /* ### ## */
+ 0x11, 0x30, /* # # ## */
+ 0x11, 0x00, /* # # */
+ 0x11, 0x00, /* # # */
+ 0x0E, 0x00, /* ### */
+
+ /* @72 '&' (9 pixels wide) */
+ 0x0E, 0x00, /* ### */
+ 0x1F, 0x60, /* ##### ## */
+ 0x11, 0xF0, /* # ##### */
+ 0x13, 0x90, /* # ### # */
+ 0x17, 0x10, /* # ### # */
+ 0x1E, 0x20, /* #### # */
+ 0x0C, 0x00, /* ## */
+ 0x1F, 0x00, /* ##### */
+ 0x13, 0x00, /* # ## */
+
+ /* @90 ''' (1 pixels wide) */
+ 0x00, 0x70, /* ### */
+
+ /* @92 '(' (4 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x3F, 0xF8, /* ########### */
+ 0x38, 0x38, /* ### ### */
+ 0x20, 0x08, /* # # */
+
+ /* @100 ')' (4 pixels wide) */
+ 0x20, 0x08, /* # # */
+ 0x38, 0x38, /* ### ### */
+ 0x3F, 0xF8, /* ########### */
+ 0x07, 0xC0, /* ##### */
+
+ /* @108 '*' (5 pixels wide) */
+ 0x01, 0x20, /* # # */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0xF0, /* ###### */
+ 0x00, 0xC0, /* ## */
+ 0x01, 0x20, /* # # */
+
+ /* @118 '+' (7 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+
+ /* @132 ',' (3 pixels wide) */
+ 0x40, 0x00, /* # */
+ 0x38, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+
+ /* @138 '-' (4 pixels wide) */
+ 0x06, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+
+ /* @146 '.' (2 pixels wide) */
+ 0x18, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+
+ /* @150 '/' (4 pixels wide) */
+ 0x30, 0x00, /* ## */
+ 0x1E, 0x00, /* #### */
+ 0x01, 0xE0, /* #### */
+ 0x00, 0x30, /* ## */
+
+ /* @158 '0' (7 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x18, 0x30, /* ## ## */
+ 0x0F, 0xE0, /* ####### */
+ 0x07, 0xC0, /* ##### */
+
+ /* @172 '1' (6 pixels wide) */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+
+ /* @184 '2' (7 pixels wide) */
+ 0x10, 0x20, /* # # */
+ 0x18, 0x10, /* ## # */
+ 0x1C, 0x10, /* ### # */
+ 0x16, 0x10, /* # ## # */
+ 0x13, 0x10, /* # ## # */
+ 0x11, 0xF0, /* # ##### */
+ 0x10, 0xE0, /* # ### */
+
+ /* @198 '3' (7 pixels wide) */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x0E, 0xE0, /* ### ### */
+
+ /* @212 '4' (7 pixels wide) */
+ 0x07, 0x00, /* ### */
+ 0x05, 0x80, /* # ## */
+ 0x04, 0x60, /* # ## */
+ 0x04, 0x30, /* # ## */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x04, 0x00, /* # */
+
+ /* @226 '5' (7 pixels wide) */
+ 0x10, 0xF0, /* # #### */
+ 0x10, 0xF0, /* # #### */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x19, 0x90, /* ## ## # */
+ 0x1F, 0x90, /* ###### # */
+ 0x0F, 0x00, /* #### */
+
+ /* @240 '6' (7 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x0F, 0xE0, /* ####### */
+ 0x10, 0xB0, /* # # ## */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x1F, 0x90, /* ###### # */
+ 0x0F, 0x00, /* #### */
+
+ /* @254 '7' (7 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x10, 0x10, /* # # */
+ 0x1C, 0x10, /* ### # */
+ 0x0F, 0x10, /* #### # */
+ 0x03, 0xD0, /* #### # */
+ 0x00, 0xF0, /* #### */
+ 0x00, 0x30, /* ## */
+
+ /* @268 '8' (7 pixels wide) */
+ 0x0E, 0xE0, /* ### ### */
+ 0x1E, 0xF0, /* #### #### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x1E, 0xF0, /* #### #### */
+ 0x0E, 0xE0, /* ### ### */
+
+ /* @282 '9' (7 pixels wide) */
+ 0x01, 0xE0, /* #### */
+ 0x13, 0xF0, /* # ###### */
+ 0x12, 0x10, /* # # # */
+ 0x12, 0x10, /* # # # */
+ 0x1A, 0x10, /* ## # # */
+ 0x0F, 0xE0, /* ####### */
+ 0x07, 0xC0, /* ##### */
+
+ /* @296 ':' (2 pixels wide) */
+ 0x18, 0xC0, /* ## ## */
+ 0x18, 0xC0, /* ## ## */
+
+ /* @300 ';' (3 pixels wide) */
+ 0x40, 0x00, /* # */
+ 0x38, 0xC0, /* ### ## */
+ 0x18, 0xC0, /* ## ## */
+
+ /* @306 '<' (8 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x07, 0x00, /* ### */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x0D, 0x80, /* ## ## */
+ 0x08, 0x80, /* # # */
+ 0x08, 0x80, /* # # */
+ 0x18, 0xC0, /* ## ## */
+
+ /* @322 '=' (8 pixels wide) */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+
+ /* @338 '>' (8 pixels wide) */
+ 0x18, 0xC0, /* ## ## */
+ 0x08, 0x80, /* # # */
+ 0x08, 0x80, /* # # */
+ 0x0D, 0x80, /* ## ## */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x07, 0x00, /* ### */
+ 0x02, 0x00, /* # */
+
+ /* @354 '?' (5 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x1B, 0x10, /* ## ## # */
+ 0x1B, 0x90, /* ## ### # */
+ 0x00, 0xF0, /* #### */
+ 0x00, 0x60, /* ## */
+
+ /* @364 '@' (10 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x10, 0x40, /* # # */
+ 0x20, 0x20, /* # # */
+ 0x47, 0x10, /* # ### # */
+ 0x48, 0x90, /* # # # # */
+ 0x48, 0x90, /* # # # # */
+ 0x4F, 0x90, /* # ##### # */
+ 0x68, 0x20, /* ## # # */
+ 0x0C, 0x60, /* ## ## */
+ 0x07, 0x80, /* #### */
+
+ /* @384 'A' (9 pixels wide) */
+ 0x10, 0x00, /* # */
+ 0x1E, 0x00, /* #### */
+ 0x0F, 0xC0, /* ###### */
+ 0x05, 0xF0, /* # ##### */
+ 0x04, 0x30, /* # ## */
+ 0x05, 0xF0, /* # ##### */
+ 0x0F, 0xC0, /* ###### */
+ 0x1E, 0x00, /* #### */
+ 0x10, 0x00, /* # */
+
+ /* @402 'B' (7 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x0E, 0xE0, /* ### ### */
+
+ /* @416 'C' (7 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x18, 0x30, /* ## ## */
+
+ /* @430 'D' (8 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x18, 0x30, /* ## ## */
+ 0x0F, 0xE0, /* ####### */
+ 0x07, 0xC0, /* ##### */
+
+ /* @446 'E' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+
+ /* @458 'F' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+
+ /* @470 'G' (8 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x1F, 0x10, /* ##### # */
+ 0x1F, 0x30, /* ##### ## */
+
+ /* @486 'H' (8 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @502 'I' (2 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @506 'J' (4 pixels wide) */
+ 0x40, 0x00, /* # */
+ 0x40, 0x00, /* # */
+ 0x7F, 0xF0, /* ########### */
+ 0x3F, 0xF0, /* ########## */
+
+ /* @514 'K' (8 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x03, 0x80, /* ### */
+ 0x06, 0xC0, /* ## ## */
+ 0x0C, 0x60, /* ## ## */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+
+ /* @530 'L' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+
+ /* @542 'M' (10 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x70, /* ### */
+ 0x01, 0xC0, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x01, 0xC0, /* ### */
+ 0x00, 0x70, /* ### */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @562 'N' (8 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x70, /* ### */
+ 0x01, 0xC0, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x1C, 0x00, /* ### */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @578 'O' (9 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x18, 0x30, /* ## ## */
+ 0x0F, 0xE0, /* ####### */
+ 0x07, 0xC0, /* ##### */
+
+ /* @596 'P' (7 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x02, 0x10, /* # # */
+ 0x02, 0x10, /* # # */
+ 0x02, 0x10, /* # # */
+ 0x03, 0xF0, /* ###### */
+ 0x01, 0xE0, /* #### */
+
+ /* @610 'Q' (9 pixels wide) */
+ 0x07, 0xC0, /* ##### */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x30, 0x10, /* ## # */
+ 0x78, 0x30, /* #### ## */
+ 0x4F, 0xE0, /* # ####### */
+ 0x07, 0xC0, /* ##### */
+
+ /* @628 'R' (8 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x03, 0x10, /* ## # */
+ 0x0F, 0xF0, /* ######## */
+ 0x1C, 0xE0, /* ### ### */
+ 0x10, 0x00, /* # */
+
+ /* @644 'S' (7 pixels wide) */
+ 0x18, 0xE0, /* ## ### */
+ 0x11, 0xF0, /* # ##### */
+ 0x11, 0x90, /* # ## # */
+ 0x11, 0x90, /* # ## # */
+ 0x13, 0x10, /* # ## # */
+ 0x1F, 0x30, /* ##### ## */
+ 0x0E, 0x00, /* ### */
+
+ /* @658 'T' (8 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+
+ /* @674 'U' (8 pixels wide) */
+ 0x0F, 0xF0, /* ######## */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x0F, 0xF0, /* ######## */
+
+ /* @690 'V' (9 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0xF0, /* #### */
+ 0x07, 0xE0, /* ###### */
+ 0x1F, 0x00, /* ##### */
+ 0x18, 0x00, /* ## */
+ 0x1F, 0x00, /* ##### */
+ 0x07, 0xE0, /* ###### */
+ 0x00, 0xF0, /* #### */
+ 0x00, 0x10, /* # */
+
+ /* @708 'W' (12 pixels wide) */
+ 0x00, 0x30, /* ## */
+ 0x03, 0xF0, /* ###### */
+ 0x1F, 0xC0, /* ####### */
+ 0x1E, 0x00, /* #### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0xF0, /* #### */
+ 0x00, 0xF0, /* #### */
+ 0x07, 0xC0, /* ##### */
+ 0x1E, 0x00, /* #### */
+ 0x1F, 0xC0, /* ####### */
+ 0x03, 0xF0, /* ###### */
+ 0x00, 0x30, /* ## */
+
+ /* @732 'X' (9 pixels wide) */
+ 0x10, 0x10, /* # # */
+ 0x18, 0x30, /* ## ## */
+ 0x0E, 0xE0, /* ### ### */
+ 0x07, 0xC0, /* ##### */
+ 0x01, 0x00, /* # */
+ 0x07, 0xC0, /* ##### */
+ 0x0E, 0xE0, /* ### ### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+
+ /* @750 'Y' (8 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x70, /* ### */
+ 0x00, 0xE0, /* ### */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x10, /* # */
+
+ /* @766 'Z' (8 pixels wide) */
+ 0x18, 0x10, /* ## # */
+ 0x1C, 0x10, /* ### # */
+ 0x16, 0x10, /* # ## # */
+ 0x13, 0x10, /* # ## # */
+ 0x11, 0x90, /* # ## # */
+ 0x10, 0xD0, /* # ## # */
+ 0x10, 0x70, /* # ### */
+ 0x10, 0x30, /* # ## */
+
+ /* @782 '[' (4 pixels wide) */
+ 0x3F, 0xF8, /* ########### */
+ 0x3F, 0xF8, /* ########### */
+ 0x20, 0x08, /* # # */
+ 0x20, 0x08, /* # # */
+
+ /* @790 '\' (4 pixels wide) */
+ 0x00, 0x30, /* ## */
+ 0x01, 0xE0, /* #### */
+ 0x1E, 0x00, /* #### */
+ 0x30, 0x00, /* ## */
+
+ /* @798 ']' (4 pixels wide) */
+ 0x20, 0x08, /* # # */
+ 0x20, 0x08, /* # # */
+ 0x3F, 0xF8, /* ########### */
+ 0x3F, 0xF8, /* ########### */
+
+ /* @806 '^' (6 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x40, /* # */
+
+ /* @818 '_' (6 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+
+ /* @830 '`' (3 pixels wide) */
+ 0x00, 0x08, /* # */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x10, /* # */
+
+ /* @836 'a' (7 pixels wide) */
+ 0x0C, 0x00, /* ## */
+ 0x1E, 0x80, /* #### # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x1A, 0x40, /* ## # # */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0x80, /* ###### */
+
+ /* @850 'b' (7 pixels wide) */
+ 0x1F, 0xF8, /* ########## */
+ 0x1F, 0xF8, /* ########## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xC0, /* ####### */
+ 0x0F, 0x80, /* ##### */
+
+ /* @864 'c' (6 pixels wide) */
+ 0x07, 0x00, /* ### */
+ 0x0F, 0x80, /* ##### */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x08, 0x80, /* # # */
+
+ /* @876 'd' (7 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x1F, 0xC0, /* ####### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xF8, /* ########## */
+ 0x1F, 0xF8, /* ########## */
+
+ /* @890 'e' (7 pixels wide) */
+ 0x07, 0x00, /* ### */
+ 0x0F, 0x80, /* ##### */
+ 0x1A, 0xC0, /* ## # ## */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x13, 0xC0, /* # #### */
+ 0x0B, 0x00, /* # ## */
+
+ /* @904 'f' (5 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF8, /* ########## */
+ 0x00, 0x48, /* # # */
+ 0x00, 0x48, /* # # */
+
+ /* @914 'g' (7 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x5F, 0xC0, /* # ####### */
+ 0x90, 0xC0, /* # # ## */
+ 0x90, 0x40, /* # # # */
+ 0x90, 0x40, /* # # # */
+ 0xFF, 0xC0, /* ########## */
+ 0x7F, 0xC0, /* ######### */
+
+ /* @928 'h' (7 pixels wide) */
+ 0x1F, 0xF8, /* ########## */
+ 0x1F, 0xF8, /* ########## */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0x80, /* ###### */
+
+ /* @942 'i' (2 pixels wide) */
+ 0x1F, 0xD8, /* ####### ## */
+ 0x1F, 0xD8, /* ####### ## */
+
+ /* @946 'j' (3 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0xFF, 0xD8, /* ########## ## */
+ 0x7F, 0xD8, /* ######### ## */
+
+ /* @952 'k' (7 pixels wide) */
+ 0x1F, 0xF8, /* ########## */
+ 0x1F, 0xF8, /* ########## */
+ 0x03, 0x00, /* ## */
+ 0x07, 0x80, /* #### */
+ 0x0C, 0xC0, /* ## ## */
+ 0x18, 0x40, /* ## # */
+ 0x10, 0x00, /* # */
+
+ /* @966 'l' (2 pixels wide) */
+ 0x1F, 0xF8, /* ########## */
+ 0x1F, 0xF8, /* ########## */
+
+ /* @970 'm' (10 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0x80, /* ###### */
+
+ /* @990 'n' (7 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0x80, /* ###### */
+
+ /* @1004 'o' (7 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x1F, 0xC0, /* ####### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xC0, /* ####### */
+ 0x0F, 0x80, /* ##### */
+
+ /* @1018 'p' (7 pixels wide) */
+ 0xFF, 0xC0, /* ########## */
+ 0xFF, 0xC0, /* ########## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xC0, /* ####### */
+ 0x0F, 0x80, /* ##### */
+
+ /* @1032 'q' (7 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x1F, 0xC0, /* ####### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0xFF, 0xC0, /* ########## */
+ 0xFF, 0xC0, /* ########## */
+
+ /* @1046 'r' (5 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+
+ /* @1056 's' (6 pixels wide) */
+ 0x09, 0x80, /* # ## */
+ 0x13, 0xC0, /* # #### */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x1E, 0x40, /* #### # */
+ 0x0C, 0x80, /* ## # */
+
+ /* @1068 't' (5 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+
+ /* @1078 'u' (7 pixels wide) */
+ 0x0F, 0xC0, /* ###### */
+ 0x1F, 0xC0, /* ####### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x18, 0x00, /* ## */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xC0, /* ####### */
+
+ /* @1092 'v' (7 pixels wide) */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0xC0, /* ##### */
+ 0x1F, 0x00, /* ##### */
+ 0x18, 0x00, /* ## */
+ 0x1F, 0x00, /* ##### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0xC0, /* ## */
+
+ /* @1106 'w' (10 pixels wide) */
+ 0x01, 0xC0, /* ### */
+ 0x0F, 0xC0, /* ###### */
+ 0x1C, 0x00, /* ### */
+ 0x1F, 0x00, /* ##### */
+ 0x03, 0xC0, /* #### */
+ 0x03, 0xC0, /* #### */
+ 0x1F, 0x00, /* ##### */
+ 0x1C, 0x00, /* ### */
+ 0x0F, 0xC0, /* ###### */
+ 0x01, 0xC0, /* ### */
+
+ /* @1126 'x' (7 pixels wide) */
+ 0x10, 0x40, /* # # */
+ 0x18, 0xC0, /* ## ## */
+ 0x0F, 0x80, /* ##### */
+ 0x07, 0x00, /* ### */
+ 0x0F, 0x80, /* ##### */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+
+ /* @1140 'y' (7 pixels wide) */
+ 0x00, 0xC0, /* ## */
+ 0x83, 0xC0, /* # #### */
+ 0xCF, 0x00, /* ## #### */
+ 0x7C, 0x00, /* ##### */
+ 0x3F, 0x00, /* ###### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0xC0, /* ## */
+
+ /* @1154 'z' (6 pixels wide) */
+ 0x18, 0x40, /* ## # */
+ 0x1C, 0x40, /* ### # */
+ 0x16, 0x40, /* # ## # */
+ 0x13, 0x40, /* # ## # */
+ 0x11, 0xC0, /* # ### */
+ 0x10, 0xC0, /* # ## */
+
+ /* @1166 '{' (6 pixels wide) */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x3E, 0xF8, /* ##### ##### */
+ 0x20, 0x08, /* # # */
+ 0x20, 0x08, /* # # */
+
+ /* @1178 '|' (1 pixels wide) */
+ 0xFF, 0xF0, /* ############ */
+
+ /* @1180 '}' (6 pixels wide) */
+ 0x20, 0x08, /* # # */
+ 0x20, 0x08, /* # # */
+ 0x3E, 0xF8, /* ##### ##### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+
+ /* @1192 '~' (8 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x01, 0x00, /* # */
+};
+
+/* Character descriptors for DejaVu Sans 9pt */
+/* { [Char width in bits], [Offset into dejaVuSansBold9ptCharBitmaps in bytes] } */
+const FONT_CHAR_INFO dejaVuSansBold9ptCharDescriptors[] =
+{
+ {5, 0}, /* */
+ {2, 10}, /* ! */
+ {3, 14}, /* " */
+ {8, 20}, /* # */
+ {7, 36}, /* $ */
+ {11, 50}, /* % */
+ {9, 72}, /* & */
+ {1, 90}, /* ' */
+ {4, 92}, /* ( */
+ {4, 100}, /* ) */
+ {5, 108}, /* * */
+ {7, 118}, /* + */
+ {3, 132}, /* , */
+ {4, 138}, /* - */
+ {2, 146}, /* . */
+ {4, 150}, /* / */
+ {7, 158}, /* 0 */
+ {6, 172}, /* 1 */
+ {7, 184}, /* 2 */
+ {7, 198}, /* 3 */
+ {7, 212}, /* 4 */
+ {7, 226}, /* 5 */
+ {7, 240}, /* 6 */
+ {7, 254}, /* 7 */
+ {7, 268}, /* 8 */
+ {7, 282}, /* 9 */
+ {2, 296}, /* : */
+ {3, 300}, /* ; */
+ {8, 306}, /* < */
+ {8, 322}, /* = */
+ {8, 338}, /* > */
+ {5, 354}, /* ? */
+ {10, 364}, /* @ */
+ {9, 384}, /* A */
+ {7, 402}, /* B */
+ {7, 416}, /* C */
+ {8, 430}, /* D */
+ {6, 446}, /* E */
+ {6, 458}, /* F */
+ {8, 470}, /* G */
+ {8, 486}, /* H */
+ {2, 502}, /* I */
+ {4, 506}, /* J */
+ {8, 514}, /* K */
+ {6, 530}, /* L */
+ {10, 542}, /* M */
+ {8, 562}, /* N */
+ {9, 578}, /* O */
+ {7, 596}, /* P */
+ {9, 610}, /* Q */
+ {8, 628}, /* R */
+ {7, 644}, /* S */
+ {8, 658}, /* T */
+ {8, 674}, /* U */
+ {9, 690}, /* V */
+ {12, 708}, /* W */
+ {9, 732}, /* X */
+ {8, 750}, /* Y */
+ {8, 766}, /* Z */
+ {4, 782}, /* [ */
+ {4, 790}, /* \ */
+ {4, 798}, /* ] */
+ {6, 806}, /* ^ */
+ {6, 818}, /* _ */
+ {3, 830}, /* ` */
+ {7, 836}, /* a */
+ {7, 850}, /* b */
+ {6, 864}, /* c */
+ {7, 876}, /* d */
+ {7, 890}, /* e */
+ {5, 904}, /* f */
+ {7, 914}, /* g */
+ {7, 928}, /* h */
+ {2, 942}, /* i */
+ {3, 946}, /* j */
+ {7, 952}, /* k */
+ {2, 966}, /* l */
+ {10, 970}, /* m */
+ {7, 990}, /* n */
+ {7, 1004}, /* o */
+ {7, 1018}, /* p */
+ {7, 1032}, /* q */
+ {5, 1046}, /* r */
+ {6, 1056}, /* s */
+ {5, 1068}, /* t */
+ {7, 1078}, /* u */
+ {7, 1092}, /* v */
+ {10, 1106}, /* w */
+ {7, 1126}, /* x */
+ {7, 1140}, /* y */
+ {6, 1154}, /* z */
+ {6, 1166}, /* { */
+ {1, 1178}, /* | */
+ {6, 1180}, /* } */
+ {8, 1192}, /* ~ */
+};
+
+/* Font information for DejaVu Sans 9pt */
+const FONT_INFO dejaVuSansBold9ptFontInfo =
+{
+ 2, /* Character height */
+ ' ', /* Start character */
+ dejaVuSansBold9ptCharDescriptors, /* Character decriptor array */
+ dejaVuSansBold9ptCharBitmaps, /* Character bitmap array */
+};
--- /dev/null
+#ifndef __DEJA_VU_SANS_BOLD_9__
+#define __DEJA_VU_SANS_BOLD_9__
+
+#include "bitmapfonts.h"
+
+extern const uint8_t dejaVuSansBold9ptCharBitmaps[];
+extern const FONT_CHAR_INFO dejaVuSansBold9ptCharDescriptors[];
+extern const FONT_INFO dejaVuSansBold9ptFontInfo;
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "dejavusanscondensed9.h"
+
+/*
+** Font data for DejaVu Sans Condensed 9pt
+*/
+
+/* Character bitmaps for DejaVu Sans Condensed 9pt */
+const uint8_t dejaVuSansCondensed9ptCharBitmaps[] =
+{
+ /* @0 ' ' (5 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @10 '!' (1 pixels wide) */
+ 0x13, 0xF0, /* # ###### */
+
+ /* @12 '"' (3 pixels wide) */
+ 0x00, 0xF0, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0xF0, /* #### */
+
+ /* @18 '#' (7 pixels wide) */
+ 0x04, 0x80, /* # # */
+ 0x1C, 0x80, /* ### # */
+ 0x07, 0xE0, /* ###### */
+ 0x14, 0x90, /* # # # # */
+ 0x0F, 0x80, /* ##### */
+ 0x04, 0xF0, /* # #### */
+ 0x04, 0x80, /* # # */
+
+ /* @32 '$' (5 pixels wide) */
+ 0x11, 0xC0, /* # ### */
+ 0x11, 0x20, /* # # # */
+ 0x7F, 0xF0, /* ########### */
+ 0x12, 0x20, /* # # # */
+ 0x0E, 0x40, /* ### # */
+
+ /* @42 '%' (9 pixels wide) */
+ 0x01, 0xF0, /* ##### */
+ 0x11, 0x10, /* # # # */
+ 0x08, 0xF0, /* # #### */
+ 0x06, 0x00, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x0E, 0x60, /* ### ## */
+ 0x11, 0x10, /* # # # */
+ 0x12, 0x00, /* # # */
+ 0x0C, 0x00, /* ## */
+
+ /* @60 '&' (7 pixels wide) */
+ 0x0F, 0x00, /* #### */
+ 0x10, 0xF0, /* # #### */
+ 0x11, 0x10, /* # # # */
+ 0x12, 0x10, /* # # # */
+ 0x1C, 0x00, /* ### */
+ 0x1E, 0x00, /* #### */
+ 0x11, 0x00, /* # # */
+
+ /* @74 ''' (1 pixels wide) */
+ 0x00, 0xF0, /* #### */
+
+ /* @76 '(' (2 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x60, 0x30, /* ## ## */
+
+ /* @80 ')' (2 pixels wide) */
+ 0x60, 0x10, /* ## # */
+ 0x1F, 0xE0, /* ######## */
+
+ /* @84 '*' (5 pixels wide) */
+ 0x00, 0x20, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0xF0, /* ###### */
+ 0x00, 0xC0, /* ## */
+ 0x01, 0x20, /* # # */
+
+ /* @94 '+' (7 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+
+ /* @108 ',' (1 pixels wide) */
+ 0x30, 0x00, /* ## */
+
+ /* @110 '-' (2 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+
+ /* @114 '.' (1 pixels wide) */
+ 0x10, 0x00, /* # */
+
+ /* @116 '/' (4 pixels wide) */
+ 0x30, 0x00, /* ## */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x10, /* # */
+
+ /* @124 '0' (5 pixels wide) */
+ 0x0F, 0xE0, /* ####### */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x30, /* # ## */
+ 0x0F, 0xE0, /* ####### */
+
+ /* @134 '1' (5 pixels wide) */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+
+ /* @144 '2' (5 pixels wide) */
+ 0x18, 0x30, /* ## ## */
+ 0x1C, 0x10, /* ### # */
+ 0x12, 0x10, /* # # # */
+ 0x11, 0xB0, /* # ## ## */
+ 0x10, 0xE0, /* # ### */
+
+ /* @154 '3' (5 pixels wide) */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0xB0, /* # ## ## */
+ 0x0E, 0xE0, /* ### ### */
+
+ /* @164 '4' (5 pixels wide) */
+ 0x07, 0x00, /* ### */
+ 0x04, 0xC0, /* # ## */
+ 0x04, 0x20, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x04, 0x00, /* # */
+
+ /* @174 '5' (5 pixels wide) */
+ 0x10, 0xF0, /* # #### */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x19, 0x10, /* ## # # */
+ 0x0F, 0x00, /* #### */
+
+ /* @184 '6' (5 pixels wide) */
+ 0x0F, 0xC0, /* ###### */
+ 0x11, 0x20, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x0F, 0x10, /* #### # */
+
+ /* @194 '7' (5 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x10, 0x10, /* # # */
+ 0x0E, 0x10, /* ### # */
+ 0x01, 0xD0, /* ### # */
+ 0x00, 0x30, /* ## */
+
+ /* @204 '8' (5 pixels wide) */
+ 0x1E, 0xE0, /* #### ### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0E, 0xE0, /* ### ### */
+
+ /* @214 '9' (5 pixels wide) */
+ 0x11, 0xE0, /* # #### */
+ 0x12, 0x10, /* # # # */
+ 0x12, 0x10, /* # # # */
+ 0x1B, 0x30, /* ## ## ## */
+ 0x0F, 0xE0, /* ####### */
+
+ /* @224 ':' (1 pixels wide) */
+ 0x10, 0x80, /* # # */
+
+ /* @226 ';' (1 pixels wide) */
+ 0x30, 0x80, /* ## # */
+
+ /* @228 '<' (7 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x03, 0x00, /* ## */
+ 0x05, 0x00, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x08, 0x80, /* # # */
+ 0x08, 0x40, /* # # */
+
+ /* @242 '=' (7 pixels wide) */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+
+ /* @256 '>' (7 pixels wide) */
+ 0x08, 0x40, /* # # */
+ 0x08, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x03, 0x00, /* ## */
+ 0x02, 0x00, /* # */
+
+ /* @270 '?' (4 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x17, 0x10, /* # ### # */
+ 0x01, 0x90, /* ## # */
+ 0x00, 0x60, /* ## */
+
+ /* @278 '@' (9 pixels wide) */
+ 0x1F, 0x80, /* ###### */
+ 0x20, 0x40, /* # # */
+ 0x47, 0x20, /* # ### # */
+ 0x48, 0xA0, /* # # # # */
+ 0x50, 0xA0, /* # # # # */
+ 0x49, 0x20, /* # # # # */
+ 0x4F, 0xA0, /* # ##### # */
+ 0x08, 0x40, /* # # */
+ 0x07, 0x80, /* #### */
+
+ /* @296 'A' (7 pixels wide) */
+ 0x10, 0x00, /* # */
+ 0x0E, 0x00, /* ### */
+ 0x05, 0xC0, /* # ### */
+ 0x04, 0x30, /* # ## */
+ 0x04, 0xE0, /* # ### */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+
+ /* @310 'B' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x1B, 0xE0, /* ## ##### */
+ 0x04, 0x00, /* # */
+
+ /* @322 'C' (6 pixels wide) */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x20, /* ## # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x20, /* # # */
+
+ /* @334 'D' (7 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x18, 0x20, /* ## # */
+ 0x0C, 0xE0, /* ## ### */
+ 0x03, 0x80, /* ### */
+
+ /* @348 'E' (5 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+
+ /* @358 'F' (5 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x00, 0x10, /* # */
+
+ /* @368 'G' (6 pixels wide) */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x20, /* ## # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x1F, 0x30, /* ##### ## */
+
+ /* @380 'H' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @392 'I' (1 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @394 'J' (3 pixels wide) */
+ 0x40, 0x00, /* # */
+ 0x40, 0x00, /* # */
+ 0x7F, 0xF0, /* ########### */
+
+ /* @400 'K' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x02, 0x80, /* # # */
+ 0x04, 0x60, /* # ## */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+
+ /* @412 'L' (5 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+
+ /* @422 'M' (7 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x70, /* ### */
+ 0x03, 0x80, /* ### */
+ 0x04, 0x00, /* # */
+ 0x03, 0x80, /* ### */
+ 0x00, 0x60, /* ## */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @436 'N' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x70, /* ### */
+ 0x01, 0xC0, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @448 'O' (7 pixels wide) */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x20, /* ## # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x0C, 0x60, /* ## ## */
+ 0x07, 0xC0, /* ##### */
+
+ /* @462 'P' (5 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x02, 0x10, /* # # */
+ 0x02, 0x10, /* # # */
+ 0x01, 0x30, /* # ## */
+ 0x01, 0xE0, /* #### */
+
+ /* @472 'Q' (7 pixels wide) */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x20, /* ## # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x30, 0x10, /* ## # */
+ 0x4C, 0x60, /* # ## ## */
+ 0x07, 0xC0, /* ##### */
+
+ /* @486 'R' (6 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x03, 0x30, /* ## ## */
+ 0x0E, 0xE0, /* ### ### */
+ 0x18, 0x00, /* ## */
+
+ /* @498 'S' (5 pixels wide) */
+ 0x10, 0xE0, /* # ### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x1E, 0x30, /* #### ## */
+
+ /* @508 'T' (7 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+
+ /* @522 'U' (6 pixels wide) */
+ 0x0F, 0xF0, /* ######## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x18, 0x00, /* ## */
+ 0x0F, 0xF0, /* ######## */
+
+ /* @534 'V' (7 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0xE0, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x0E, 0x00, /* ### */
+ 0x01, 0xC0, /* ### */
+ 0x00, 0x70, /* ### */
+
+ /* @548 'W' (10 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x01, 0xE0, /* #### */
+ 0x1E, 0x00, /* #### */
+ 0x1E, 0x00, /* #### */
+ 0x01, 0xE0, /* #### */
+ 0x00, 0x70, /* ### */
+ 0x07, 0x80, /* #### */
+ 0x18, 0x00, /* ## */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0xF0, /* #### */
+
+ /* @568 'X' (6 pixels wide) */
+ 0x18, 0x30, /* ## ## */
+ 0x06, 0x60, /* ## ## */
+ 0x03, 0x80, /* ### */
+ 0x06, 0xC0, /* ## ## */
+ 0x0C, 0x60, /* ## ## */
+ 0x10, 0x10, /* # # */
+
+ /* @580 'Y' (6 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x80, /* # */
+ 0x1F, 0x00, /* ##### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x30, /* ## */
+
+ /* @592 'Z' (7 pixels wide) */
+ 0x10, 0x00, /* # */
+ 0x18, 0x10, /* ## # */
+ 0x16, 0x10, /* # ## # */
+ 0x13, 0x10, /* # ## # */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x70, /* # ### */
+ 0x10, 0x30, /* # ## */
+
+ /* @606 '[' (2 pixels wide) */
+ 0x7F, 0xF0, /* ########### */
+ 0x40, 0x10, /* # # */
+
+ /* @610 '\' (3 pixels wide) */
+ 0x00, 0x30, /* ## */
+ 0x03, 0xC0, /* #### */
+ 0x3C, 0x00, /* #### */
+
+ /* @616 ']' (2 pixels wide) */
+ 0x40, 0x10, /* # # */
+ 0x7F, 0xF0, /* ########### */
+
+ /* @620 '^' (7 pixels wide) */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x80, /* # */
+
+ /* @634 '_' (6 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+
+ /* @646 '`' (2 pixels wide) */
+ 0x00, 0x08, /* # */
+ 0x00, 0x10, /* # */
+
+ /* @650 'a' (5 pixels wide) */
+ 0x1E, 0x80, /* #### # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x0A, 0x80, /* # # # */
+ 0x1F, 0x00, /* ##### */
+
+ /* @660 'b' (5 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x0F, 0x80, /* ##### */
+
+ /* @670 'c' (4 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x10, 0xC0, /* # ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+
+ /* @678 'd' (5 pixels wide) */
+ 0x1F, 0x80, /* ###### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @688 'e' (5 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0xC0, /* # # ## */
+ 0x13, 0x80, /* # ### */
+
+ /* @698 'f' (4 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x50, /* # # */
+ 0x00, 0x50, /* # # */
+
+ /* @706 'g' (5 pixels wide) */
+ 0x4F, 0x80, /* # ##### */
+ 0x90, 0x40, /* # # # */
+ 0x90, 0x40, /* # # # */
+ 0x48, 0x80, /* # # # */
+ 0x3F, 0xC0, /* ######## */
+
+ /* @716 'h' (5 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x1F, 0x80, /* ###### */
+
+ /* @726 'i' (1 pixels wide) */
+ 0x1F, 0xD0, /* ####### # */
+
+ /* @728 'j' (2 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x7F, 0xD0, /* ######### # */
+
+ /* @732 'k' (5 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+ 0x02, 0x00, /* # */
+ 0x05, 0x00, /* # # */
+ 0x18, 0x80, /* ## # */
+ 0x10, 0x40, /* # # */
+
+ /* @742 'l' (1 pixels wide) */
+ 0x1F, 0xF0, /* ######### */
+
+ /* @744 'm' (9 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x1F, 0x00, /* ##### */
+
+ /* @762 'n' (5 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x1F, 0x80, /* ###### */
+
+ /* @772 'o' (5 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x0F, 0x80, /* ##### */
+
+ /* @782 'p' (5 pixels wide) */
+ 0xFF, 0xC0, /* ########## */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x0F, 0x80, /* ##### */
+
+ /* @792 'q' (5 pixels wide) */
+ 0x1F, 0x80, /* ###### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x80, /* # # */
+ 0xFF, 0xC0, /* ########## */
+
+ /* @802 'r' (3 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+
+ /* @808 's' (4 pixels wide) */
+ 0x13, 0x80, /* # ### */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x1C, 0x80, /* ### # */
+
+ /* @816 't' (4 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+
+ /* @824 'u' (5 pixels wide) */
+ 0x1F, 0xC0, /* ####### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x1F, 0xC0, /* ####### */
+
+ /* @834 'v' (6 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x03, 0x80, /* ### */
+ 0x1C, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+
+ /* @846 'w' (8 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x07, 0x80, /* #### */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x01, 0xC0, /* ### */
+ 0x0E, 0x00, /* ### */
+ 0x1C, 0x00, /* ### */
+ 0x03, 0xC0, /* #### */
+
+ /* @862 'x' (5 pixels wide) */
+ 0x18, 0xC0, /* ## ## */
+ 0x05, 0x00, /* # # */
+ 0x07, 0x00, /* ### */
+ 0x09, 0x80, /* # ## */
+ 0x10, 0x40, /* # # */
+
+ /* @872 'y' (6 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x83, 0x80, /* # ### */
+ 0x6C, 0x00, /* ## ## */
+ 0x38, 0x00, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+
+ /* @884 'z' (5 pixels wide) */
+ 0x10, 0x00, /* # */
+ 0x18, 0x40, /* ## # */
+ 0x16, 0x40, /* # ## # */
+ 0x13, 0x40, /* # ## # */
+ 0x10, 0xC0, /* # ## */
+
+ /* @894 '{' (5 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x7D, 0xF0, /* ##### ##### */
+ 0x40, 0x10, /* # # */
+ 0x40, 0x10, /* # # */
+
+ /* @904 '|' (1 pixels wide) */
+ 0xFF, 0xF0, /* ############ */
+
+ /* @906 '}' (5 pixels wide) */
+ 0x40, 0x10, /* # # */
+ 0x40, 0x10, /* # # */
+ 0x3D, 0xF0, /* #### ##### */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+
+ /* @916 '~' (7 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+};
+
+/* Character descriptors for DejaVu Sans Condensed 9pt */
+/* { [Char width in bits], [Offset into dejaVuSansCondensed9ptCharBitmaps in bytes] } */
+const FONT_CHAR_INFO dejaVuSansCondensed9ptCharDescriptors[] =
+{
+ {5, 0}, /* */
+ {1, 10}, /* ! */
+ {3, 12}, /* " */
+ {7, 18}, /* # */
+ {5, 32}, /* $ */
+ {9, 42}, /* % */
+ {7, 60}, /* & */
+ {1, 74}, /* ' */
+ {2, 76}, /* ( */
+ {2, 80}, /* ) */
+ {5, 84}, /* * */
+ {7, 94}, /* + */
+ {1, 108}, /* , */
+ {2, 110}, /* - */
+ {1, 114}, /* . */
+ {4, 116}, /* / */
+ {5, 124}, /* 0 */
+ {5, 134}, /* 1 */
+ {5, 144}, /* 2 */
+ {5, 154}, /* 3 */
+ {5, 164}, /* 4 */
+ {5, 174}, /* 5 */
+ {5, 184}, /* 6 */
+ {5, 194}, /* 7 */
+ {5, 204}, /* 8 */
+ {5, 214}, /* 9 */
+ {1, 224}, /* : */
+ {1, 226}, /* ; */
+ {7, 228}, /* < */
+ {7, 242}, /* = */
+ {7, 256}, /* > */
+ {4, 270}, /* ? */
+ {9, 278}, /* @ */
+ {7, 296}, /* A */
+ {6, 310}, /* B */
+ {6, 322}, /* C */
+ {7, 334}, /* D */
+ {5, 348}, /* E */
+ {5, 358}, /* F */
+ {6, 368}, /* G */
+ {6, 380}, /* H */
+ {1, 392}, /* I */
+ {3, 394}, /* J */
+ {6, 400}, /* K */
+ {5, 412}, /* L */
+ {7, 422}, /* M */
+ {6, 436}, /* N */
+ {7, 448}, /* O */
+ {5, 462}, /* P */
+ {7, 472}, /* Q */
+ {6, 486}, /* R */
+ {5, 498}, /* S */
+ {7, 508}, /* T */
+ {6, 522}, /* U */
+ {7, 534}, /* V */
+ {10, 548}, /* W */
+ {6, 568}, /* X */
+ {6, 580}, /* Y */
+ {7, 592}, /* Z */
+ {2, 606}, /* [ */
+ {3, 610}, /* \ */
+ {2, 616}, /* ] */
+ {7, 620}, /* ^ */
+ {6, 634}, /* _ */
+ {2, 646}, /* ` */
+ {5, 650}, /* a */
+ {5, 660}, /* b */
+ {4, 670}, /* c */
+ {5, 678}, /* d */
+ {5, 688}, /* e */
+ {4, 698}, /* f */
+ {5, 706}, /* g */
+ {5, 716}, /* h */
+ {1, 726}, /* i */
+ {2, 728}, /* j */
+ {5, 732}, /* k */
+ {1, 742}, /* l */
+ {9, 744}, /* m */
+ {5, 762}, /* n */
+ {5, 772}, /* o */
+ {5, 782}, /* p */
+ {5, 792}, /* q */
+ {3, 802}, /* r */
+ {4, 808}, /* s */
+ {4, 816}, /* t */
+ {5, 824}, /* u */
+ {6, 834}, /* v */
+ {8, 846}, /* w */
+ {5, 862}, /* x */
+ {6, 872}, /* y */
+ {5, 884}, /* z */
+ {5, 894}, /* { */
+ {1, 904}, /* | */
+ {5, 906}, /* } */
+ {7, 916}, /* ~ */
+};
+
+/* Font information for DejaVu Sans Condensed 9pt */
+const FONT_INFO dejaVuSansCondensed9ptFontInfo =
+{
+ 2, /* Character height */
+ ' ', /* Start character */
+ dejaVuSansCondensed9ptCharDescriptors, /* Character decriptor array */
+ dejaVuSansCondensed9ptCharBitmaps, /* Character bitmap array */
+};
--- /dev/null
+#ifndef __DEJA_VU_SANS_CONDENSED_9__
+#define __DEJA_VU_SANS_CONDENSED_9__
+
+#include "bitmapfonts.h"
+
+extern const uint8_t dejaVuSansCondensed9ptCharBitmaps[];
+extern const FONT_CHAR_INFO dejaVuSansCondensed9ptCharDescriptors[];
+extern const FONT_INFO dejaVuSansCondensed9ptFontInfo;
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "dejavusansmono8.h"
+
+/*
+** Font data for DejaVu Sans Mono 8pt
+*/
+
+/* Character bitmaps for DejaVu Sans Mono 8pt */
+const uint8_t dejaVuSansMono8ptCharBitmaps[] =
+{
+ /* @0 ' ' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @16 '!' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x17, 0xE0, /* # ###### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @32 '"' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @48 '#' (8 pixels wide) */
+ 0x04, 0x00, /* # */
+ 0x1C, 0x80, /* ### # */
+ 0x07, 0xC0, /* ##### */
+ 0x14, 0xA0, /* # # # # */
+ 0x0F, 0x80, /* ##### */
+ 0x04, 0xE0, /* # ### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+
+ /* @64 '$' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x11, 0x80, /* # ## */
+ 0x12, 0x40, /* # # # */
+ 0x7F, 0xE0, /* ########## */
+ 0x12, 0x40, /* # # # */
+ 0x0C, 0x40, /* ## # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @80 '%' (8 pixels wide) */
+ 0x04, 0xE0, /* # ### */
+ 0x04, 0xA0, /* # # # */
+ 0x02, 0xE0, /* # ### */
+ 0x1D, 0x00, /* ### # */
+ 0x15, 0x00, /* # # # */
+ 0x1C, 0x80, /* ### # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @96 '&' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0E, 0x00, /* ### */
+ 0x11, 0xE0, /* # #### */
+ 0x13, 0x20, /* # ## # */
+ 0x16, 0x20, /* # ## # */
+ 0x18, 0x00, /* ## */
+ 0x16, 0x00, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @112 ''' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @128 '(' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x20, 0x10, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @144 ')' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x30, 0x30, /* ## ## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @160 '*' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x02, 0x40, /* # # */
+ 0x01, 0x80, /* ## */
+ 0x07, 0xE0, /* ###### */
+ 0x01, 0x80, /* ## */
+ 0x02, 0x40, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @176 '+' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x0F, 0x80, /* ##### */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @192 ',' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @208 '-' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @224 '.' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @240 '/' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @256 '0' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xC0, /* ###### */
+ 0x18, 0x60, /* ## ## */
+ 0x10, 0x20, /* # # */
+ 0x11, 0x20, /* # # # */
+ 0x18, 0x60, /* ## ## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @272 '1' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @288 '2' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x40, /* # # */
+ 0x18, 0x20, /* ## # */
+ 0x14, 0x20, /* # # # */
+ 0x16, 0x20, /* # ## # */
+ 0x13, 0x20, /* # ## # */
+ 0x11, 0xC0, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @304 '3' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x40, /* # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x13, 0x20, /* # ## # */
+ 0x0E, 0xC0, /* ### ## */
+ 0x00, 0x00, /* */
+
+ /* @320 '4' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x06, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x60, /* # ## */
+ 0x1F, 0xE0, /* ######## */
+ 0x04, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @336 '5' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x11, 0xE0, /* # #### */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x13, 0x20, /* # ## # */
+ 0x0E, 0x00, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @352 '6' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x12, 0x40, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x0E, 0x20, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @368 '7' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x20, /* # */
+ 0x10, 0x20, /* # # */
+ 0x0C, 0x20, /* ## # */
+ 0x03, 0x20, /* ## # */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+
+ /* @384 '8' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0E, 0xC0, /* ### ## */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x0E, 0xC0, /* ### ## */
+ 0x00, 0x00, /* */
+
+ /* @400 '9' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x11, 0xC0, /* # ### */
+ 0x12, 0x20, /* # # # */
+ 0x12, 0x20, /* # # # */
+ 0x12, 0x20, /* # # # */
+ 0x0A, 0x20, /* # # # */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @416 ':' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x19, 0x80, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @432 ';' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x19, 0x80, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @448 '<' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x09, 0x00, /* # # */
+ 0x08, 0x80, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @464 '=' (8 pixels wide) */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @480 '>' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x80, /* # # */
+ 0x09, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @496 '?' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x20, /* # */
+ 0x17, 0x20, /* # ### # */
+ 0x01, 0xA0, /* ## # */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @512 '@' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0x80, /* ###### */
+ 0x30, 0x40, /* ## # */
+ 0x46, 0x20, /* # ## # */
+ 0x49, 0x20, /* # # # # */
+ 0x49, 0x60, /* # # # ## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @528 'A' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x04, 0xE0, /* # ### */
+ 0x04, 0xE0, /* # ### */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @544 'B' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x0E, 0xC0, /* ### ## */
+ 0x00, 0x00, /* */
+
+ /* @560 'C' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x80, /* #### */
+ 0x08, 0x40, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x08, 0x40, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @576 'D' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x08, 0x40, /* # # */
+ 0x07, 0x80, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @592 'E' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x00, 0x00, /* */
+
+ /* @608 'F' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @624 'G' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x80, /* #### */
+ 0x08, 0x40, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x12, 0x20, /* # # # */
+ 0x0E, 0x40, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @640 'H' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @656 'I' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @672 'J' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @688 'K' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x01, 0x00, /* # */
+ 0x02, 0x80, /* # # */
+ 0x04, 0x40, /* # # */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @704 'L' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @720 'M' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @736 'N' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x40, /* # */
+ 0x01, 0x80, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x08, 0x00, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @752 'O' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xC0, /* ###### */
+ 0x18, 0x60, /* ## ## */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x18, 0x60, /* ## ## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @768 'P' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x01, 0xC0, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @784 'Q' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xC0, /* ###### */
+ 0x18, 0x60, /* ## ## */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x38, 0x60, /* ### ## */
+ 0x2F, 0xC0, /* # ###### */
+ 0x00, 0x00, /* */
+
+ /* @800 'R' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x06, 0x20, /* ## # */
+ 0x09, 0xC0, /* # ### */
+ 0x10, 0x00, /* # */
+
+ /* @816 'S' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x09, 0xC0, /* # ### */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x12, 0x20, /* # # # */
+ 0x0E, 0x40, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @832 'T' (8 pixels wide) */
+ 0x00, 0x20, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x20, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+
+ /* @848 'U' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xE0, /* ####### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @864 'V' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x60, /* ## */
+ 0x03, 0x80, /* ### */
+ 0x1C, 0x00, /* ### */
+ 0x1C, 0x00, /* ### */
+ 0x03, 0x80, /* ### */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @880 'W' (8 pixels wide) */
+ 0x01, 0xE0, /* #### */
+ 0x1E, 0x00, /* #### */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x1E, 0x00, /* #### */
+ 0x01, 0xE0, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @896 'X' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x0C, 0xC0, /* ## ## */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x0C, 0xC0, /* ## ## */
+ 0x10, 0x20, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @912 'Y' (8 pixels wide) */
+ 0x00, 0x20, /* # */
+ 0x00, 0x60, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x1F, 0x00, /* ##### */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+
+ /* @928 'Z' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x1C, 0x20, /* ### # */
+ 0x16, 0x20, /* # ## # */
+ 0x11, 0x20, /* # # # */
+ 0x10, 0xE0, /* # ### */
+ 0x10, 0x20, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @944 '[' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x3F, 0xF0, /* ########## */
+ 0x20, 0x10, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @960 '\' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x20, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x20, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @976 ']' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x10, /* # # */
+ 0x3F, 0xF0, /* ########## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @992 '^' (8 pixels wide) */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1008 '_' (8 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1024 '`' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1040 'a' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x80, /* ## # */
+ 0x12, 0x80, /* # # # */
+ 0x12, 0x80, /* # # # */
+ 0x12, 0x80, /* # # # */
+ 0x1F, 0x00, /* ##### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1056 'b' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1072 'c' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x19, 0x80, /* ## ## */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1088 'd' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1104 'e' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x12, 0x80, /* # # # */
+ 0x12, 0x80, /* # # # */
+ 0x12, 0x80, /* # # # */
+ 0x13, 0x00, /* # ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1120 'f' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x90, /* # # */
+ 0x00, 0x90, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1136 'g' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x50, 0x80, /* # # # */
+ 0x50, 0x80, /* # # # */
+ 0x50, 0x80, /* # # # */
+ 0x3F, 0x80, /* ####### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1152 'h' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x1F, 0x00, /* ##### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1168 'i' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x1F, 0x90, /* ###### # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1184 'j' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x40, 0x80, /* # # */
+ 0x40, 0x80, /* # # */
+ 0x3F, 0x90, /* ####### # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1200 'k' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x02, 0x00, /* # */
+ 0x05, 0x00, /* # # */
+ 0x08, 0x80, /* # # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1216 'l' (8 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1232 'm' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x80, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x80, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1248 'n' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0x80, /* ###### */
+ 0x01, 0x00, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x1F, 0x00, /* ##### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1264 'o' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1280 'p' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x7F, 0x80, /* ######## */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1296 'q' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x7F, 0x80, /* ######## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1312 'r' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1328 's' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x13, 0x00, /* # ## */
+ 0x12, 0x80, /* # # # */
+ 0x12, 0x80, /* # # # */
+ 0x14, 0x80, /* # # # */
+ 0x0C, 0x80, /* ## # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1344 't' (8 pixels wide) */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1360 'u' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1376 'v' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x80, /* ## */
+ 0x0E, 0x00, /* ### */
+ 0x10, 0x00, /* # */
+ 0x0E, 0x00, /* ### */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1392 'w' (8 pixels wide) */
+ 0x01, 0x80, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @1408 'x' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x80, /* # # */
+ 0x19, 0x80, /* ## ## */
+ 0x06, 0x00, /* ## */
+ 0x19, 0x80, /* ## ## */
+ 0x10, 0x80, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1424 'y' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x41, 0x80, /* # ## */
+ 0x6E, 0x00, /* ## ### */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1440 'z' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x80, /* # # */
+ 0x1C, 0x80, /* ### # */
+ 0x16, 0x80, /* # ## # */
+ 0x13, 0x80, /* # ### */
+ 0x10, 0x80, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1456 '{' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x3E, 0xF0, /* ##### #### */
+ 0x20, 0x10, /* # # */
+ 0x20, 0x10, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1472 '|' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x7F, 0xF0, /* ########### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1488 '}' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x20, 0x10, /* # # */
+ 0x20, 0x10, /* # # */
+ 0x3E, 0xF0, /* ##### #### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1504 '~' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x00, 0x00, /* */
+};
+
+/* Character descriptors for DejaVu Sans Mono 8pt */
+/* { [Char width in bits], [Offset into dejaVuSansMono8ptCharBitmaps in bytes] } */
+const FONT_CHAR_INFO dejaVuSansMono8ptCharDescriptors[] =
+{
+ {8, 0}, /* */
+ {8, 16}, /* ! */
+ {8, 32}, /* " */
+ {8, 48}, /* # */
+ {8, 64}, /* $ */
+ {8, 80}, /* % */
+ {8, 96}, /* & */
+ {8, 112}, /* ' */
+ {8, 128}, /* ( */
+ {8, 144}, /* ) */
+ {8, 160}, /* * */
+ {8, 176}, /* + */
+ {8, 192}, /* , */
+ {8, 208}, /* - */
+ {8, 224}, /* . */
+ {8, 240}, /* / */
+ {8, 256}, /* 0 */
+ {8, 272}, /* 1 */
+ {8, 288}, /* 2 */
+ {8, 304}, /* 3 */
+ {8, 320}, /* 4 */
+ {8, 336}, /* 5 */
+ {8, 352}, /* 6 */
+ {8, 368}, /* 7 */
+ {8, 384}, /* 8 */
+ {8, 400}, /* 9 */
+ {8, 416}, /* : */
+ {8, 432}, /* ; */
+ {8, 448}, /* < */
+ {8, 464}, /* = */
+ {8, 480}, /* > */
+ {8, 496}, /* ? */
+ {8, 512}, /* @ */
+ {8, 528}, /* A */
+ {8, 544}, /* B */
+ {8, 560}, /* C */
+ {8, 576}, /* D */
+ {8, 592}, /* E */
+ {8, 608}, /* F */
+ {8, 624}, /* G */
+ {8, 640}, /* H */
+ {8, 656}, /* I */
+ {8, 672}, /* J */
+ {8, 688}, /* K */
+ {8, 704}, /* L */
+ {8, 720}, /* M */
+ {8, 736}, /* N */
+ {8, 752}, /* O */
+ {8, 768}, /* P */
+ {8, 784}, /* Q */
+ {8, 800}, /* R */
+ {8, 816}, /* S */
+ {8, 832}, /* T */
+ {8, 848}, /* U */
+ {8, 864}, /* V */
+ {8, 880}, /* W */
+ {8, 896}, /* X */
+ {8, 912}, /* Y */
+ {8, 928}, /* Z */
+ {8, 944}, /* [ */
+ {8, 960}, /* \ */
+ {8, 976}, /* ] */
+ {8, 992}, /* ^ */
+ {8, 1008}, /* _ */
+ {8, 1024}, /* ` */
+ {8, 1040}, /* a */
+ {8, 1056}, /* b */
+ {8, 1072}, /* c */
+ {8, 1088}, /* d */
+ {8, 1104}, /* e */
+ {8, 1120}, /* f */
+ {8, 1136}, /* g */
+ {8, 1152}, /* h */
+ {8, 1168}, /* i */
+ {8, 1184}, /* j */
+ {8, 1200}, /* k */
+ {8, 1216}, /* l */
+ {8, 1232}, /* m */
+ {8, 1248}, /* n */
+ {8, 1264}, /* o */
+ {8, 1280}, /* p */
+ {8, 1296}, /* q */
+ {8, 1312}, /* r */
+ {8, 1328}, /* s */
+ {8, 1344}, /* t */
+ {8, 1360}, /* u */
+ {8, 1376}, /* v */
+ {8, 1392}, /* w */
+ {8, 1408}, /* x */
+ {8, 1424}, /* y */
+ {8, 1440}, /* z */
+ {8, 1456}, /* { */
+ {8, 1472}, /* | */
+ {8, 1488}, /* } */
+ {8, 1504}, /* ~ */
+};
+
+/* Font information for DejaVu Sans Mono 8pt */
+const FONT_INFO dejaVuSansMono8ptFontInfo =
+{
+ 2, /* Character height */
+ ' ', /* Start character */
+ dejaVuSansMono8ptCharDescriptors, /* Character decriptor array */
+ dejaVuSansMono8ptCharBitmaps, /* Character bitmap array */
+};
--- /dev/null
+#ifndef __DEJA_VU_SANS_MONO_8__
+#define __DEJA_VU_SANS_MONO_8__
+
+#include "bitmapfonts.h"
+
+extern const uint8_t dejaVuSansMono8ptCharBitmaps[];
+extern const FONT_CHAR_INFO dejaVuSansMono8ptCharDescriptors[];
+extern const FONT_INFO dejaVuSansMono8ptFontInfo;
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "dejavusansmonobold8.h"
+
+/*
+** Font data for DejaVu Sans Mono Bold 8pt
+*/
+
+/* Character bitmaps for DejaVu Sans Mono Bold 8pt */
+const uint8_t dejaVuSansMonoBold8ptCharBitmaps[] =
+{
+ /* @0 ' ' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @16 '!' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x1B, 0xE0, /* ## ##### */
+ 0x1B, 0xE0, /* ## ##### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @32 '"' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @48 '#' (8 pixels wide) */
+ 0x04, 0x00, /* # */
+ 0x1C, 0x80, /* ### # */
+ 0x07, 0xC0, /* ##### */
+ 0x1C, 0xE0, /* ### ### */
+ 0x0F, 0x80, /* ##### */
+ 0x04, 0xE0, /* # ### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+
+ /* @64 '$' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x09, 0x80, /* # ## */
+ 0x13, 0x40, /* # ## # */
+ 0x7F, 0xE0, /* ########## */
+ 0x13, 0x40, /* # ## # */
+ 0x0E, 0x00, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @80 '%' (8 pixels wide) */
+ 0x04, 0xE0, /* # ### */
+ 0x04, 0xA0, /* # # # */
+ 0x02, 0xE0, /* # ### */
+ 0x1D, 0x00, /* ### # */
+ 0x15, 0x00, /* # # # */
+ 0x1C, 0x80, /* ### # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @96 '&' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0E, 0x00, /* ### */
+ 0x1E, 0xE0, /* #### ### */
+ 0x13, 0xE0, /* # ##### */
+ 0x1E, 0x20, /* #### # */
+ 0x18, 0x00, /* ## */
+ 0x1E, 0x00, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @112 ''' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @128 '(' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x07, 0x80, /* #### */
+ 0x1F, 0xE0, /* ######## */
+ 0x30, 0x30, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @144 ')' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x30, 0x30, /* ## ## */
+ 0x1F, 0xE0, /* ######## */
+ 0x07, 0x80, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @160 '*' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x02, 0x40, /* # # */
+ 0x01, 0x80, /* ## */
+ 0x07, 0xE0, /* ###### */
+ 0x01, 0x80, /* ## */
+ 0x02, 0x40, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @176 '+' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x0F, 0x80, /* ##### */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @192 ',' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x40, 0x00, /* # */
+ 0x38, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @208 '-' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x06, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @224 '.' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x18, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @240 '/' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @256 '0' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xC0, /* ###### */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x20, /* # # */
+ 0x11, 0x20, /* # # # */
+ 0x1F, 0xE0, /* ######## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @272 '1' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @288 '2' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x18, 0x20, /* ## # */
+ 0x14, 0x20, /* # # # */
+ 0x13, 0x20, /* # ## # */
+ 0x11, 0xE0, /* # #### */
+ 0x10, 0xC0, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @304 '3' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x1E, 0xE0, /* #### ### */
+ 0x0E, 0xC0, /* ### ## */
+ 0x00, 0x00, /* */
+
+ /* @320 '4' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x06, 0x00, /* ## */
+ 0x05, 0x80, /* # ## */
+ 0x04, 0xC0, /* # ## */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x04, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @336 '5' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x11, 0xE0, /* # #### */
+ 0x11, 0xE0, /* # #### */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x1F, 0x20, /* ##### # */
+ 0x0E, 0x20, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @352 '6' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x1F, 0xE0, /* ######## */
+ 0x11, 0x60, /* # # ## */
+ 0x11, 0x20, /* # # # */
+ 0x1F, 0x20, /* ##### # */
+ 0x0E, 0x00, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @368 '7' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x20, /* # */
+ 0x10, 0x20, /* # # */
+ 0x1E, 0x20, /* #### # */
+ 0x0F, 0xA0, /* ##### # */
+ 0x03, 0xE0, /* ##### */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @384 '8' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0E, 0xC0, /* ### ## */
+ 0x1E, 0xE0, /* #### ### */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x1E, 0xE0, /* #### ### */
+ 0x0E, 0xC0, /* ### ## */
+ 0x00, 0x00, /* */
+
+ /* @400 '9' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0xC0, /* ### */
+ 0x13, 0xE0, /* # ##### */
+ 0x12, 0x20, /* # # # */
+ 0x1A, 0x20, /* ## # # */
+ 0x1F, 0xE0, /* ######## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @416 ':' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x19, 0x80, /* ## ## */
+ 0x19, 0x80, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @432 ';' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x40, 0x00, /* # */
+ 0x39, 0x80, /* ### ## */
+ 0x19, 0x80, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @448 '<' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x06, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x0F, 0x00, /* #### */
+ 0x09, 0x00, /* # # */
+ 0x09, 0x00, /* # # */
+ 0x19, 0x80, /* ## ## */
+ 0x00, 0x00, /* */
+
+ /* @464 '=' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @480 '>' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x19, 0x80, /* ## ## */
+ 0x09, 0x00, /* # # */
+ 0x09, 0x00, /* # # */
+ 0x0F, 0x00, /* #### */
+ 0x06, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @496 '?' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x40, /* # */
+ 0x1B, 0x20, /* ## ## # */
+ 0x1A, 0xE0, /* ## # ### */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @512 '@' (8 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x10, 0x40, /* # # */
+ 0x27, 0x20, /* # ### # */
+ 0x28, 0xA0, /* # # # # */
+ 0x28, 0xA0, /* # # # # */
+ 0x3F, 0xC0, /* ######## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @528 'A' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x00, /* ## */
+ 0x1F, 0x80, /* ###### */
+ 0x05, 0xE0, /* # #### */
+ 0x05, 0xE0, /* # #### */
+ 0x1F, 0x80, /* ###### */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @544 'B' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x1E, 0xE0, /* #### ### */
+ 0x0E, 0xC0, /* ### ## */
+ 0x00, 0x00, /* */
+
+ /* @560 'C' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x80, /* #### */
+ 0x0F, 0xC0, /* ###### */
+ 0x18, 0x60, /* ## ## */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x08, 0x40, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @576 'D' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x1F, 0xE0, /* ######## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @592 'E' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x11, 0x20, /* # # # */
+ 0x10, 0x20, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @608 'F' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+
+ /* @624 'G' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x80, /* #### */
+ 0x0F, 0xC0, /* ###### */
+ 0x18, 0x60, /* ## ## */
+ 0x12, 0x20, /* # # # */
+ 0x1E, 0x20, /* #### # */
+ 0x1E, 0x40, /* #### # */
+ 0x00, 0x00, /* */
+
+ /* @640 'H' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @656 'I' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @672 'J' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x1F, 0xE0, /* ######## */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @688 'K' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x03, 0x00, /* ## */
+ 0x07, 0xC0, /* ##### */
+ 0x1C, 0x60, /* ### ## */
+ 0x18, 0x20, /* ## # */
+ 0x00, 0x00, /* */
+
+ /* @704 'L' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @720 'M' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xC0, /* ####### */
+ 0x03, 0x80, /* ### */
+ 0x03, 0x80, /* ### */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @736 'N' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x01, 0xC0, /* ### */
+ 0x0E, 0x00, /* ### */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @752 'O' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xC0, /* ###### */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x1F, 0xE0, /* ######## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @768 'P' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x03, 0xE0, /* ##### */
+ 0x01, 0xC0, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @784 'Q' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xC0, /* ###### */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x20, /* # # */
+ 0x10, 0x20, /* # # */
+ 0x3F, 0xE0, /* ######### */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @800 'R' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x0D, 0xE0, /* ## #### */
+ 0x19, 0xC0, /* ## ### */
+ 0x10, 0x00, /* # */
+
+ /* @816 'S' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x09, 0xC0, /* # ### */
+ 0x11, 0xE0, /* # #### */
+ 0x13, 0x20, /* # ## # */
+ 0x13, 0x20, /* # ## # */
+ 0x1E, 0x20, /* #### # */
+ 0x0E, 0x40, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @832 'T' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x20, /* # */
+ 0x00, 0x20, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+
+ /* @848 'U' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xE0, /* ####### */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @864 'V' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x60, /* ## */
+ 0x07, 0xE0, /* ###### */
+ 0x1E, 0x00, /* #### */
+ 0x1E, 0x00, /* #### */
+ 0x07, 0xE0, /* ###### */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @880 'W' (8 pixels wide) */
+ 0x01, 0xE0, /* #### */
+ 0x1F, 0xE0, /* ######## */
+ 0x1E, 0x00, /* #### */
+ 0x01, 0x80, /* ## */
+ 0x1E, 0x00, /* #### */
+ 0x1F, 0xE0, /* ######## */
+ 0x01, 0xE0, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @896 'X' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x1C, 0xE0, /* ### ### */
+ 0x07, 0x80, /* #### */
+ 0x07, 0x80, /* #### */
+ 0x1C, 0xE0, /* ### ### */
+ 0x10, 0x20, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @912 'Y' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x20, /* # */
+ 0x01, 0xE0, /* #### */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x80, /* ###### */
+ 0x01, 0xE0, /* #### */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+
+ /* @928 'Z' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x20, /* ## # */
+ 0x1C, 0x20, /* ### # */
+ 0x17, 0x20, /* # ### # */
+ 0x11, 0xA0, /* # ## # */
+ 0x10, 0xE0, /* # ### */
+ 0x10, 0x60, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @944 '[' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x3F, 0xF0, /* ########## */
+ 0x3F, 0xF0, /* ########## */
+ 0x20, 0x10, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @960 '\' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x20, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x20, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @976 ']' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x10, /* # # */
+ 0x3F, 0xF0, /* ########## */
+ 0x3F, 0xF0, /* ########## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @992 '^' (8 pixels wide) */
+ 0x00, 0x80, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x60, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1008 '_' (8 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1024 '`' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1040 'a' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x00, /* ## */
+ 0x1E, 0x80, /* #### # */
+ 0x12, 0x80, /* # # # */
+ 0x12, 0x80, /* # # # */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x00, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @1056 'b' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x1F, 0x80, /* ###### */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @1072 'c' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x1F, 0x80, /* ###### */
+ 0x19, 0x80, /* ## ## */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1088 'd' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x1F, 0x80, /* ###### */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x00, /* */
+
+ /* @1104 'e' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x1F, 0x80, /* ###### */
+ 0x12, 0x80, /* # # # */
+ 0x12, 0x80, /* # # # */
+ 0x13, 0x80, /* # ### */
+ 0x13, 0x00, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @1120 'f' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x80, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x90, /* # # */
+ 0x00, 0x90, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1136 'g' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x5F, 0x80, /* # ###### */
+ 0x50, 0x80, /* # # # */
+ 0x50, 0x80, /* # # # */
+ 0x7F, 0x80, /* ######## */
+ 0x3F, 0x80, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1152 'h' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x00, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @1168 'i' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x1F, 0xB0, /* ###### ## */
+ 0x1F, 0xB0, /* ###### ## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1184 'j' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x40, 0x80, /* # # */
+ 0x40, 0x80, /* # # */
+ 0x7F, 0xB0, /* ######## ## */
+ 0x3F, 0xB0, /* ####### ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1200 'k' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x02, 0x00, /* # */
+ 0x0F, 0x80, /* ##### */
+ 0x18, 0x80, /* ## # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1216 'l' (8 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1232 'm' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x80, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x80, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @1248 'n' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x00, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @1264 'o' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x1F, 0x80, /* ###### */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x1F, 0x80, /* ###### */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @1280 'p' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x7F, 0x80, /* ######## */
+ 0x7F, 0x80, /* ######## */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x1F, 0x80, /* ###### */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @1296 'q' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x00, /* #### */
+ 0x1F, 0x80, /* ###### */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x7F, 0x80, /* ######## */
+ 0x7F, 0x80, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @1312 'r' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1328 's' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0B, 0x00, /* # ## */
+ 0x13, 0x80, /* # ### */
+ 0x16, 0x80, /* # ## # */
+ 0x16, 0x80, /* # ## # */
+ 0x1C, 0x80, /* ### # */
+ 0x0D, 0x00, /* ## # */
+ 0x00, 0x00, /* */
+
+ /* @1344 't' (8 pixels wide) */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xE0, /* ######## */
+ 0x10, 0x80, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1360 'u' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x1F, 0x80, /* ###### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @1376 'v' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x80, /* ## */
+ 0x0F, 0x80, /* ##### */
+ 0x1C, 0x00, /* ### */
+ 0x1C, 0x00, /* ### */
+ 0x0F, 0x80, /* ##### */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @1392 'w' (8 pixels wide) */
+ 0x01, 0x80, /* ## */
+ 0x1F, 0x80, /* ###### */
+ 0x1C, 0x00, /* ### */
+ 0x02, 0x00, /* # */
+ 0x1C, 0x00, /* ### */
+ 0x1F, 0x80, /* ###### */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @1408 'x' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x80, /* # # */
+ 0x19, 0x80, /* ## ## */
+ 0x0F, 0x00, /* #### */
+ 0x0F, 0x00, /* #### */
+ 0x19, 0x80, /* ## ## */
+ 0x10, 0x80, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1424 'y' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x40, 0x80, /* # # */
+ 0x47, 0x80, /* # #### */
+ 0x7C, 0x00, /* ##### */
+ 0x1E, 0x00, /* #### */
+ 0x07, 0x80, /* #### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1440 'z' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x80, /* ## # */
+ 0x1C, 0x80, /* ### # */
+ 0x14, 0x80, /* # # # */
+ 0x12, 0x80, /* # # # */
+ 0x13, 0x80, /* # ### */
+ 0x11, 0x80, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @1456 '{' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x3D, 0xF0, /* #### ##### */
+ 0x3D, 0xF0, /* #### ##### */
+ 0x20, 0x10, /* # # */
+ 0x20, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1472 '|' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x7F, 0xF0, /* ########### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1488 '}' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x20, 0x10, /* # # */
+ 0x20, 0x10, /* # # */
+ 0x3D, 0xF0, /* #### ##### */
+ 0x3D, 0xF0, /* #### ##### */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1504 '~' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x00, 0x00, /* */
+};
+
+/* Character descriptors for DejaVu Sans Mono 8pt */
+/* { [Char width in bits], [Offset into dejaVuSansMonoBold8ptCharBitmaps in bytes] } */
+const FONT_CHAR_INFO dejaVuSansMonoBold8ptCharDescriptors[] =
+{
+ {8, 0}, /* */
+ {8, 16}, /* ! */
+ {8, 32}, /* " */
+ {8, 48}, /* # */
+ {8, 64}, /* $ */
+ {8, 80}, /* % */
+ {8, 96}, /* & */
+ {8, 112}, /* ' */
+ {8, 128}, /* ( */
+ {8, 144}, /* ) */
+ {8, 160}, /* * */
+ {8, 176}, /* + */
+ {8, 192}, /* , */
+ {8, 208}, /* - */
+ {8, 224}, /* . */
+ {8, 240}, /* / */
+ {8, 256}, /* 0 */
+ {8, 272}, /* 1 */
+ {8, 288}, /* 2 */
+ {8, 304}, /* 3 */
+ {8, 320}, /* 4 */
+ {8, 336}, /* 5 */
+ {8, 352}, /* 6 */
+ {8, 368}, /* 7 */
+ {8, 384}, /* 8 */
+ {8, 400}, /* 9 */
+ {8, 416}, /* : */
+ {8, 432}, /* ; */
+ {8, 448}, /* < */
+ {8, 464}, /* = */
+ {8, 480}, /* > */
+ {8, 496}, /* ? */
+ {8, 512}, /* @ */
+ {8, 528}, /* A */
+ {8, 544}, /* B */
+ {8, 560}, /* C */
+ {8, 576}, /* D */
+ {8, 592}, /* E */
+ {8, 608}, /* F */
+ {8, 624}, /* G */
+ {8, 640}, /* H */
+ {8, 656}, /* I */
+ {8, 672}, /* J */
+ {8, 688}, /* K */
+ {8, 704}, /* L */
+ {8, 720}, /* M */
+ {8, 736}, /* N */
+ {8, 752}, /* O */
+ {8, 768}, /* P */
+ {8, 784}, /* Q */
+ {8, 800}, /* R */
+ {8, 816}, /* S */
+ {8, 832}, /* T */
+ {8, 848}, /* U */
+ {8, 864}, /* V */
+ {8, 880}, /* W */
+ {8, 896}, /* X */
+ {8, 912}, /* Y */
+ {8, 928}, /* Z */
+ {8, 944}, /* [ */
+ {8, 960}, /* \ */
+ {8, 976}, /* ] */
+ {8, 992}, /* ^ */
+ {8, 1008}, /* _ */
+ {8, 1024}, /* ` */
+ {8, 1040}, /* a */
+ {8, 1056}, /* b */
+ {8, 1072}, /* c */
+ {8, 1088}, /* d */
+ {8, 1104}, /* e */
+ {8, 1120}, /* f */
+ {8, 1136}, /* g */
+ {8, 1152}, /* h */
+ {8, 1168}, /* i */
+ {8, 1184}, /* j */
+ {8, 1200}, /* k */
+ {8, 1216}, /* l */
+ {8, 1232}, /* m */
+ {8, 1248}, /* n */
+ {8, 1264}, /* o */
+ {8, 1280}, /* p */
+ {8, 1296}, /* q */
+ {8, 1312}, /* r */
+ {8, 1328}, /* s */
+ {8, 1344}, /* t */
+ {8, 1360}, /* u */
+ {8, 1376}, /* v */
+ {8, 1392}, /* w */
+ {8, 1408}, /* x */
+ {8, 1424}, /* y */
+ {8, 1440}, /* z */
+ {8, 1456}, /* { */
+ {8, 1472}, /* | */
+ {8, 1488}, /* } */
+ {8, 1504}, /* ~ */
+};
+
+/* Font information for DejaVu Sans Mono 8pt */
+const FONT_INFO dejaVuSansMonoBold8ptFontInfo =
+{
+ 2, /* Character height */
+ ' ', /* Start character */
+ dejaVuSansMonoBold8ptCharDescriptors, /* Character decriptor array */
+ dejaVuSansMonoBold8ptCharBitmaps, /* Character bitmap array */
+};
--- /dev/null
+#ifndef __DEJA_VU_SANS_MONO_BOLD_8__
+#define __DEJA_VU_SANS_MONO_BOLD_8__
+
+#include "bitmapfonts.h"
+
+extern const uint8_t dejaVuSansMonoBold8ptCharBitmaps[];
+extern const FONT_CHAR_INFO dejaVuSansMonoBold8ptCharDescriptors[];
+extern const FONT_INFO dejaVuSansMonoBold8ptFontInfo;
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "veramono11.h"
+
+/*
+** Font data for Bitstream Vera Sans Mono 11pt
+*/
+
+/* Character bitmaps for Bitstream Vera Sans Mono 11pt */
+const uint8_t bitstreamVeraSansMono11ptCharBitmaps[] =
+{
+ /* @0 ' ' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @18 '!' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x0C, 0xFE, /* ## ####### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @36 '"' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @54 '#' (9 pixels wide) */
+ 0x01, 0x00, /* # */
+ 0x09, 0x10, /* # # # */
+ 0x07, 0xD0, /* ##### # */
+ 0x01, 0x7C, /* # ##### */
+ 0x0D, 0x16, /* ## # # ## */
+ 0x07, 0xD0, /* ##### # */
+ 0x01, 0x7C, /* # ##### */
+ 0x01, 0x16, /* # # ## */
+ 0x00, 0x10, /* # */
+
+ /* @72 '$' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x38, /* # ### */
+ 0x08, 0x4C, /* # # ## */
+ 0x08, 0x44, /* # # # */
+ 0x3F, 0xFF, /* ############## */
+ 0x08, 0x84, /* # # # */
+ 0x08, 0x84, /* # # # */
+ 0x07, 0x08, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @90 '%' (9 pixels wide) */
+ 0x00, 0x1C, /* ### */
+ 0x00, 0xA2, /* # # # */
+ 0x00, 0xA2, /* # # # */
+ 0x00, 0x62, /* ## # */
+ 0x07, 0x5C, /* ### # ### */
+ 0x08, 0xC0, /* # ## */
+ 0x08, 0xA0, /* # # # */
+ 0x08, 0xA0, /* # # # */
+ 0x07, 0x00, /* ### */
+
+ /* @108 '&' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x04, 0x7C, /* # ##### */
+ 0x08, 0x32, /* # ## # */
+ 0x08, 0x62, /* # ## # */
+ 0x09, 0x82, /* # ## # */
+ 0x07, 0x02, /* ### # */
+ 0x09, 0xC0, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @126 ''' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @144 '(' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x07, 0xF0, /* ####### */
+ 0x18, 0x0C, /* ## ## */
+ 0x20, 0x02, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @162 ')' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x02, /* # # */
+ 0x18, 0x0C, /* ## ## */
+ 0x07, 0xF0, /* ####### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @180 '*' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x24, /* # # */
+ 0x00, 0x28, /* # # */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x7E, /* ###### */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x28, /* # # */
+ 0x00, 0x24, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @198 '+' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x07, 0xF0, /* ####### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+
+ /* @216 ',' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x1C, 0x00, /* ### */
+ 0x0C, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @234 '-' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @252 '.' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x0C, 0x00, /* ## */
+ 0x0C, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @270 '/' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x00, /* # */
+ 0x0C, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x0C, /* ## */
+ 0x00, 0x02, /* # */
+ 0x00, 0x00, /* */
+
+ /* @288 '0' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xF8, /* ####### */
+ 0x04, 0x04, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x62, /* # ## # */
+ 0x08, 0x62, /* # ## # */
+ 0x04, 0x04, /* # # */
+ 0x03, 0xF8, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @306 '1' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x08, 0x04, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @324 '2' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x0C, /* # ## */
+ 0x0C, 0x06, /* ## ## */
+ 0x0A, 0x02, /* # # # */
+ 0x09, 0x02, /* # # # */
+ 0x08, 0x82, /* # # # */
+ 0x08, 0x44, /* # # # */
+ 0x08, 0x3C, /* # #### */
+ 0x00, 0x00, /* */
+
+ /* @342 '3' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x04, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x0C, 0xA4, /* ## # # # */
+ 0x07, 0xBC, /* #### #### */
+ 0x00, 0x00, /* */
+
+ /* @360 '4' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x80, /* ## */
+ 0x01, 0x60, /* # ## */
+ 0x01, 0x30, /* # ## */
+ 0x01, 0x0C, /* # ## */
+ 0x01, 0x06, /* # ## */
+ 0x0F, 0xFE, /* ########### */
+ 0x01, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @378 '5' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x7E, /* # ###### */
+ 0x08, 0x22, /* # # # */
+ 0x08, 0x22, /* # # # */
+ 0x08, 0x22, /* # # # */
+ 0x08, 0x22, /* # # # */
+ 0x04, 0x42, /* # # # */
+ 0x03, 0x80, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @396 '6' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xF0, /* ###### */
+ 0x04, 0x4C, /* # # ## */
+ 0x08, 0x26, /* # # ## */
+ 0x08, 0x22, /* # # # */
+ 0x08, 0x22, /* # # # */
+ 0x0C, 0x62, /* ## ## # */
+ 0x07, 0xC4, /* ##### # */
+ 0x00, 0x00, /* */
+
+ /* @414 '7' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x02, /* # */
+ 0x08, 0x02, /* # # */
+ 0x06, 0x02, /* ## # */
+ 0x01, 0x82, /* ## # */
+ 0x00, 0x62, /* ## # */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @432 '8' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xBC, /* #### #### */
+ 0x0C, 0xA6, /* ## # # ## */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x0C, 0xA6, /* ## # # ## */
+ 0x07, 0xBC, /* #### #### */
+ 0x00, 0x00, /* */
+
+ /* @450 '9' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x7C, /* # ##### */
+ 0x08, 0xC6, /* # ## ## */
+ 0x08, 0x82, /* # # # */
+ 0x08, 0x82, /* # # # */
+ 0x0C, 0x82, /* ## # # */
+ 0x06, 0x44, /* ## # # */
+ 0x01, 0xF8, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @468 ':' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x0C, 0x30, /* ## ## */
+ 0x0C, 0x30, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @486 ';' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x1C, 0x30, /* ### ## */
+ 0x0C, 0x30, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @504 '<' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x80, /* # */
+ 0x01, 0xC0, /* ### */
+ 0x01, 0x40, /* # # */
+ 0x01, 0x40, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x04, 0x10, /* # # */
+
+ /* @522 '=' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+ 0x01, 0x20, /* # # */
+
+ /* @540 '>' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x10, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x01, 0x40, /* # # */
+ 0x01, 0x40, /* # # */
+ 0x01, 0xC0, /* ### */
+ 0x00, 0x80, /* # */
+
+ /* @558 '?' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x04, /* # */
+ 0x00, 0x02, /* # */
+ 0x0D, 0xC2, /* ## ### # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x22, /* # # */
+ 0x00, 0x1C, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @576 '@' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xE0, /* ###### */
+ 0x18, 0x18, /* ## ## */
+ 0x10, 0x0C, /* # ## */
+ 0x23, 0xC4, /* # #### # */
+ 0x24, 0x24, /* # # # # */
+ 0x24, 0x2C, /* # # # ## */
+ 0x07, 0xF8, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @594 'A' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x00, /* ## */
+ 0x03, 0xC0, /* #### */
+ 0x01, 0x3C, /* # #### */
+ 0x01, 0x02, /* # # */
+ 0x01, 0x3C, /* # #### */
+ 0x03, 0xC0, /* #### */
+ 0x0C, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @612 'B' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x0C, 0xE6, /* ## ### ## */
+ 0x07, 0xBC, /* #### #### */
+ 0x00, 0x00, /* */
+
+ /* @630 'C' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0xF0, /* ##### */
+ 0x06, 0x0C, /* ## ## */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x04, 0x04, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @648 'D' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x0C, 0x06, /* ## ## */
+ 0x06, 0x0C, /* ## ## */
+ 0x01, 0xF0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @666 'E' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x00, 0x00, /* */
+
+ /* @684 'F' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @702 'G' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0xF0, /* ##### */
+ 0x06, 0x0C, /* ## ## */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x07, 0xC4, /* ##### # */
+ 0x00, 0x00, /* */
+
+ /* @720 'H' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @738 'I' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @756 'J' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x0C, 0x02, /* ## # */
+ 0x07, 0xFE, /* ########## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @774 'K' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x40, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0xD0, /* ## # */
+ 0x01, 0x08, /* # # */
+ 0x06, 0x04, /* ## # */
+ 0x08, 0x02, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @792 'L' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @810 'M' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x0E, /* ### */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x0E, /* ### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @828 'N' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x18, /* ## */
+ 0x00, 0xE0, /* ### */
+ 0x03, 0x00, /* ## */
+ 0x0C, 0x00, /* ## */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @846 'O' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xF8, /* ####### */
+ 0x04, 0x04, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x04, 0x04, /* # # */
+ 0x03, 0xF8, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @864 'P' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x82, /* # # */
+ 0x00, 0x82, /* # # */
+ 0x00, 0x82, /* # # */
+ 0x00, 0x82, /* # # */
+ 0x00, 0xC6, /* ## ## */
+ 0x00, 0x7C, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @882 'Q' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xF8, /* ####### */
+ 0x04, 0x04, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x18, 0x02, /* ## # */
+ 0x3C, 0x04, /* #### # */
+ 0x03, 0xF8, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @900 'R' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0xA6, /* # # ## */
+ 0x07, 0x3C, /* ### #### */
+ 0x08, 0x00, /* # */
+
+ /* @918 'S' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x3C, /* # #### */
+ 0x0C, 0x24, /* ## # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x0C, 0x86, /* ## # ## */
+ 0x07, 0x84, /* #### # */
+ 0x00, 0x00, /* */
+
+ /* @936 'T' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x00, 0x00, /* */
+
+ /* @954 'U' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xFE, /* ########## */
+ 0x0C, 0x00, /* ## */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x0C, 0x00, /* ## */
+ 0x07, 0xFE, /* ########## */
+ 0x00, 0x00, /* */
+
+ /* @972 'V' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x78, /* #### */
+ 0x07, 0x80, /* #### */
+ 0x08, 0x00, /* # */
+ 0x07, 0x80, /* #### */
+ 0x00, 0x78, /* #### */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @990 'W' (9 pixels wide) */
+ 0x00, 0x0E, /* ### */
+ 0x03, 0xF0, /* ###### */
+ 0x0C, 0x00, /* ## */
+ 0x03, 0xE0, /* ##### */
+ 0x00, 0x10, /* # */
+ 0x03, 0xE0, /* ##### */
+ 0x0C, 0x00, /* ## */
+ 0x03, 0xF0, /* ###### */
+ 0x00, 0x0E, /* ### */
+
+ /* @1008 'X' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x02, /* # # */
+ 0x06, 0x0C, /* ## ## */
+ 0x01, 0xB0, /* ## ## */
+ 0x00, 0x40, /* # */
+ 0x01, 0xB0, /* ## ## */
+ 0x06, 0x0C, /* ## ## */
+ 0x08, 0x02, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1026 'Y' (9 pixels wide) */
+ 0x00, 0x02, /* # */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x30, /* ## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x20, /* # */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x02, /* # */
+
+ /* @1044 'Z' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x02, /* ## # */
+ 0x0A, 0x02, /* # # # */
+ 0x09, 0x82, /* # ## # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x32, /* # ## # */
+ 0x08, 0x0A, /* # # # */
+ 0x08, 0x06, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @1062 '[' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x3F, 0xFE, /* ############# */
+ 0x20, 0x02, /* # # */
+ 0x20, 0x02, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1080 '\' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x02, /* # */
+ 0x00, 0x0C, /* ## */
+ 0x00, 0x30, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x0C, 0x00, /* ## */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1098 ']' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x02, /* # # */
+ 0x20, 0x02, /* # # */
+ 0x3F, 0xFE, /* ############# */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1116 '^' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x0C, /* ## */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x0C, /* ## */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x10, /* # */
+
+ /* @1134 '_' (9 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1152 '`' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x01, /* # */
+ 0x00, 0x03, /* ## */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x04, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1170 'a' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x00, /* ### */
+ 0x09, 0xA0, /* # ## # */
+ 0x08, 0x90, /* # # # */
+ 0x08, 0x90, /* # # # */
+ 0x08, 0x90, /* # # # */
+ 0x04, 0x90, /* # # # */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1188 'b' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x04, 0x20, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x04, 0x20, /* # # */
+ 0x03, 0xC0, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @1206 'c' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x04, 0x20, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x04, 0x20, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1224 'd' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x04, 0x20, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x04, 0x20, /* # # */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @1242 'e' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x05, 0x20, /* # # # */
+ 0x09, 0x10, /* # # # */
+ 0x09, 0x10, /* # # # */
+ 0x09, 0x10, /* # # # */
+ 0x09, 0x20, /* # # # */
+ 0x05, 0xC0, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @1260 'f' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xFC, /* ########## */
+ 0x00, 0x12, /* # # */
+ 0x00, 0x12, /* # # */
+ 0x00, 0x12, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1278 'g' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x24, 0x20, /* # # # */
+ 0x48, 0x10, /* # # # */
+ 0x48, 0x10, /* # # # */
+ 0x48, 0x10, /* # # # */
+ 0x64, 0x20, /* ## # # */
+ 0x3F, 0xF0, /* ########## */
+ 0x00, 0x00, /* */
+
+ /* @1296 'h' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x20, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x30, /* ## */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1314 'i' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x00, /* # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x0F, 0xF6, /* ######## ## */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1332 'j' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x40, 0x00, /* # */
+ 0x40, 0x10, /* # # */
+ 0x40, 0x10, /* # # */
+ 0x3F, 0xF6, /* ########## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1350 'k' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x80, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x01, 0x20, /* # # */
+ 0x02, 0x20, /* # # */
+ 0x04, 0x10, /* # # */
+ 0x08, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1368 'l' (9 pixels wide) */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x07, 0xFE, /* ########## */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1386 'm' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1404 'n' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x30, /* ## */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1422 'o' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x04, 0x20, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x04, 0x20, /* # # */
+ 0x03, 0xC0, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @1440 'p' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x7F, 0xF0, /* ########### */
+ 0x04, 0x20, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x04, 0x20, /* # # */
+ 0x03, 0xC0, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @1458 'q' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x04, 0x20, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x04, 0x20, /* # # */
+ 0x7F, 0xF0, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @1476 'r' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x20, /* # */
+
+ /* @1494 's' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0xE0, /* # ### */
+ 0x08, 0x90, /* # # # */
+ 0x08, 0x90, /* # # # */
+ 0x08, 0x90, /* # # # */
+ 0x09, 0x10, /* # # # */
+ 0x09, 0x10, /* # # # */
+ 0x07, 0x20, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @1512 't' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x07, 0xFC, /* ######### */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1530 'u' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xF0, /* ####### */
+ 0x0C, 0x00, /* ## */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @1548 'v' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0xE0, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x08, 0x00, /* # */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1566 'w' (9 pixels wide) */
+ 0x00, 0x30, /* ## */
+ 0x03, 0xC0, /* #### */
+ 0x0C, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x0C, 0x00, /* ## */
+ 0x03, 0xC0, /* #### */
+ 0x00, 0x30, /* ## */
+
+ /* @1584 'x' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x10, /* # # */
+ 0x0C, 0x30, /* ## ## */
+ 0x02, 0x40, /* # # */
+ 0x01, 0x80, /* ## */
+ 0x02, 0x40, /* # # */
+ 0x0C, 0x30, /* ## ## */
+ 0x08, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1602 'y' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x40, 0xE0, /* # ### */
+ 0x43, 0x00, /* # ## */
+ 0x3C, 0x00, /* #### */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1620 'z' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x10, /* ## # */
+ 0x0A, 0x10, /* # # # */
+ 0x09, 0x10, /* # # # */
+ 0x09, 0x10, /* # # # */
+ 0x08, 0x90, /* # # # */
+ 0x08, 0x50, /* # # # */
+ 0x08, 0x30, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @1638 '{' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x3F, 0x7C, /* ###### ##### */
+ 0x40, 0x02, /* # # */
+ 0x40, 0x02, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1656 '|' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0xFF, 0xFE, /* ############### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1674 '}' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x40, 0x02, /* # # */
+ 0x40, 0x02, /* # # */
+ 0x3F, 0x7C, /* ###### ##### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1692 '~' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+};
+
+/* Character descriptors for Bitstream Vera Sans Mono 11pt */
+/* { [Char width in bits], [Offset into bitstreamVeraSansMono11ptCharBitmaps in bytes] } */
+const FONT_CHAR_INFO bitstreamVeraSansMono11ptCharDescriptors[] =
+{
+ {9, 0}, /* */
+ {9, 18}, /* ! */
+ {9, 36}, /* " */
+ {9, 54}, /* # */
+ {9, 72}, /* $ */
+ {9, 90}, /* % */
+ {9, 108}, /* & */
+ {9, 126}, /* ' */
+ {9, 144}, /* ( */
+ {9, 162}, /* ) */
+ {9, 180}, /* * */
+ {9, 198}, /* + */
+ {9, 216}, /* , */
+ {9, 234}, /* - */
+ {9, 252}, /* . */
+ {9, 270}, /* / */
+ {9, 288}, /* 0 */
+ {9, 306}, /* 1 */
+ {9, 324}, /* 2 */
+ {9, 342}, /* 3 */
+ {9, 360}, /* 4 */
+ {9, 378}, /* 5 */
+ {9, 396}, /* 6 */
+ {9, 414}, /* 7 */
+ {9, 432}, /* 8 */
+ {9, 450}, /* 9 */
+ {9, 468}, /* : */
+ {9, 486}, /* ; */
+ {9, 504}, /* < */
+ {9, 522}, /* = */
+ {9, 540}, /* > */
+ {9, 558}, /* ? */
+ {9, 576}, /* @ */
+ {9, 594}, /* A */
+ {9, 612}, /* B */
+ {9, 630}, /* C */
+ {9, 648}, /* D */
+ {9, 666}, /* E */
+ {9, 684}, /* F */
+ {9, 702}, /* G */
+ {9, 720}, /* H */
+ {9, 738}, /* I */
+ {9, 756}, /* J */
+ {9, 774}, /* K */
+ {9, 792}, /* L */
+ {9, 810}, /* M */
+ {9, 828}, /* N */
+ {9, 846}, /* O */
+ {9, 864}, /* P */
+ {9, 882}, /* Q */
+ {9, 900}, /* R */
+ {9, 918}, /* S */
+ {9, 936}, /* T */
+ {9, 954}, /* U */
+ {9, 972}, /* V */
+ {9, 990}, /* W */
+ {9, 1008}, /* X */
+ {9, 1026}, /* Y */
+ {9, 1044}, /* Z */
+ {9, 1062}, /* [ */
+ {9, 1080}, /* \ */
+ {9, 1098}, /* ] */
+ {9, 1116}, /* ^ */
+ {9, 1134}, /* _ */
+ {9, 1152}, /* ` */
+ {9, 1170}, /* a */
+ {9, 1188}, /* b */
+ {9, 1206}, /* c */
+ {9, 1224}, /* d */
+ {9, 1242}, /* e */
+ {9, 1260}, /* f */
+ {9, 1278}, /* g */
+ {9, 1296}, /* h */
+ {9, 1314}, /* i */
+ {9, 1332}, /* j */
+ {9, 1350}, /* k */
+ {9, 1368}, /* l */
+ {9, 1386}, /* m */
+ {9, 1404}, /* n */
+ {9, 1422}, /* o */
+ {9, 1440}, /* p */
+ {9, 1458}, /* q */
+ {9, 1476}, /* r */
+ {9, 1494}, /* s */
+ {9, 1512}, /* t */
+ {9, 1530}, /* u */
+ {9, 1548}, /* v */
+ {9, 1566}, /* w */
+ {9, 1584}, /* x */
+ {9, 1602}, /* y */
+ {9, 1620}, /* z */
+ {9, 1638}, /* { */
+ {9, 1656}, /* | */
+ {9, 1674}, /* } */
+ {9, 1692}, /* ~ */
+};
+
+/* Font information for Bitstream Vera Sans Mono 11pt */
+const FONT_INFO bitstreamVeraSansMono11ptFontInfo =
+{
+ 2, /* Character height */
+ ' ', /* Start character */
+ bitstreamVeraSansMono11ptCharDescriptors, /* Character decriptor array */
+ bitstreamVeraSansMono11ptCharBitmaps, /* Character bitmap array */
+};
--- /dev/null
+#ifndef __VERA_MONO_11__
+#define __VERA_MONO_11__
+
+#include "bitmapfonts.h"
+
+/* Font data for Bitstream Vera Sans Mono 11pt */
+extern const uint8_t bitstreamVeraSansMono11ptCharBitmaps[];
+extern const FONT_CHAR_INFO bitstreamVeraSansMono11ptCharDescriptors[];
+extern const FONT_INFO bitstreamVeraSansMono11ptFontInfo;
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "veramono9.h"
+
+/*
+** Font data for Bitstream Vera Sans Mono 9pt
+*/
+
+/* Character bitmaps for Bitstream Vera Sans Mono 9pt */
+const uint8_t bitstreamVeraSansMono9ptCharBitmaps[] =
+{
+ /* @0 ' ' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @16 '!' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x1B, 0xF0, /* ## ###### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @32 '"' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @48 '#' (8 pixels wide) */
+ 0x04, 0x00, /* # */
+ 0x1C, 0x80, /* ### # */
+ 0x07, 0xC0, /* ##### */
+ 0x14, 0xA0, /* # # # # */
+ 0x0F, 0x80, /* ##### */
+ 0x04, 0xE0, /* # ### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+
+ /* @64 '$' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x09, 0xC0, /* # ### */
+ 0x11, 0x20, /* # # # */
+ 0x7F, 0xF0, /* ########### */
+ 0x12, 0x20, /* # # # */
+ 0x0E, 0x40, /* ### # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @80 '%' (8 pixels wide) */
+ 0x00, 0x60, /* ## */
+ 0x02, 0x90, /* # # # */
+ 0x02, 0x90, /* # # # */
+ 0x0D, 0x60, /* ## # ## */
+ 0x13, 0x00, /* # ## */
+ 0x12, 0x80, /* # # # */
+ 0x0C, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @96 '&' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0E, 0x00, /* ### */
+ 0x19, 0xE0, /* ## #### */
+ 0x11, 0x90, /* # ## # */
+ 0x16, 0x10, /* # ## # */
+ 0x0C, 0x10, /* ## # */
+ 0x16, 0x00, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @112 ''' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @128 '(' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x38, 0x38, /* ### ### */
+ 0x20, 0x08, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @144 ')' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x08, /* # # */
+ 0x38, 0x38, /* ### ### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @160 '*' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x20, /* # # */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0xF0, /* ###### */
+ 0x00, 0xC0, /* ## */
+ 0x01, 0x20, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @176 '+' (8 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @192 ',' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @208 '-' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @224 '.' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @240 '/' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x18, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @256 '0' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x18, 0x30, /* ## ## */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @272 '1' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @288 '2' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x20, /* # # */
+ 0x18, 0x10, /* ## # */
+ 0x14, 0x10, /* # # # */
+ 0x12, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x10, 0xE0, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @304 '3' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0E, 0xE0, /* ### ### */
+ 0x00, 0x00, /* */
+
+ /* @320 '4' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x06, 0x00, /* ## */
+ 0x05, 0x80, /* # ## */
+ 0x04, 0xC0, /* # ## */
+ 0x04, 0x30, /* # ## */
+ 0x1F, 0xF0, /* ######### */
+ 0x04, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @336 '5' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0xF0, /* # #### */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x19, 0x90, /* ## ## # */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @352 '6' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x19, 0x20, /* ## # # */
+ 0x10, 0x90, /* # # # */
+ 0x10, 0x90, /* # # # */
+ 0x19, 0x90, /* ## ## # */
+ 0x0F, 0x20, /* #### # */
+ 0x00, 0x00, /* */
+
+ /* @368 '7' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x10, 0x10, /* # # */
+ 0x0C, 0x10, /* ## # */
+ 0x03, 0x10, /* ## # */
+ 0x00, 0xF0, /* #### */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @384 '8' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0E, 0xE0, /* ### ### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0E, 0xE0, /* ### ### */
+ 0x00, 0x00, /* */
+
+ /* @400 '9' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x09, 0xE0, /* # #### */
+ 0x13, 0x30, /* # ## ## */
+ 0x12, 0x10, /* # # # */
+ 0x12, 0x10, /* # # # */
+ 0x09, 0x30, /* # # ## */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @416 ':' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x19, 0x80, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @432 ';' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x19, 0x80, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @448 '<' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x08, 0x40, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @464 '=' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @480 '>' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x40, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @496 '?' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x20, /* # */
+ 0x1B, 0x10, /* ## ## # */
+ 0x01, 0x90, /* ## # */
+ 0x00, 0x90, /* # # */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @512 '@' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0x80, /* ###### */
+ 0x30, 0x40, /* ## # */
+ 0x46, 0x20, /* # ## # */
+ 0x49, 0x20, /* # # # # */
+ 0x49, 0x60, /* # # # ## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @528 'A' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x80, /* #### */
+ 0x04, 0x70, /* # ### */
+ 0x04, 0x70, /* # ### */
+ 0x07, 0x80, /* #### */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @544 'B' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0E, 0xE0, /* ### ### */
+ 0x00, 0x00, /* */
+
+ /* @560 'C' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x08, 0x20, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @576 'D' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x08, 0x20, /* # # */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @592 'E' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x00, 0x00, /* */
+
+ /* @608 'F' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @624 'G' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x0F, 0x20, /* #### # */
+ 0x00, 0x00, /* */
+
+ /* @640 'H' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x00, /* */
+
+ /* @656 'I' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @672 'J' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @688 'K' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x80, /* ## */
+ 0x06, 0x40, /* ## # */
+ 0x0C, 0x20, /* ## # */
+ 0x10, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @704 'L' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @720 'M' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x60, /* ## */
+ 0x03, 0x80, /* ### */
+ 0x03, 0x80, /* ### */
+ 0x00, 0x60, /* ## */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x00, /* */
+
+ /* @736 'N' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x30, /* ## */
+ 0x01, 0xC0, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x00, /* */
+
+ /* @752 'O' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x18, 0x30, /* ## ## */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @768 'P' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @784 'Q' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x78, 0x30, /* #### ## */
+ 0x0F, 0xC0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @800 'R' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x03, 0x10, /* ## # */
+ 0x0C, 0xE0, /* ## ### */
+ 0x10, 0x00, /* # */
+
+ /* @816 'S' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0xE0, /* # ### */
+ 0x11, 0x90, /* # ## # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x0E, 0x20, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @832 'T' (8 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @848 'U' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xF0, /* ######## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @864 'V' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x30, /* ## */
+ 0x03, 0xC0, /* #### */
+ 0x1C, 0x00, /* ### */
+ 0x1C, 0x00, /* ### */
+ 0x03, 0xC0, /* #### */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @880 'W' (8 pixels wide) */
+ 0x03, 0xF0, /* ###### */
+ 0x1C, 0x00, /* ### */
+ 0x07, 0x80, /* #### */
+ 0x00, 0x60, /* ## */
+ 0x07, 0x80, /* #### */
+ 0x1C, 0x00, /* ### */
+ 0x03, 0xF0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @896 'X' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x10, /* # # */
+ 0x0C, 0x60, /* ## ## */
+ 0x03, 0x80, /* ### */
+ 0x03, 0x80, /* ### */
+ 0x0C, 0x60, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @912 'Y' (8 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0xC0, /* ## */
+ 0x1F, 0x00, /* ##### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x20, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @928 'Z' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x10, /* ## # */
+ 0x1C, 0x10, /* ### # */
+ 0x13, 0x10, /* # ## # */
+ 0x11, 0x90, /* # ## # */
+ 0x10, 0x70, /* # ### */
+ 0x10, 0x30, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @944 '[' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x3F, 0xF8, /* ########### */
+ 0x20, 0x08, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @960 '\' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x60, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+ 0x20, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @976 ']' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x08, /* # # */
+ 0x3F, 0xF8, /* ########### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @992 '^' (8 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x20, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1008 '_' (8 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1024 '`' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x08, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1040 'a' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x80, /* ## # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1056 'b' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF8, /* ########## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x0F, 0x80, /* ##### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1072 'c' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x80, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1088 'd' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xF8, /* ########## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1104 'e' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x12, 0xC0, /* # # ## */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x0B, 0x80, /* # ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1120 'f' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x48, /* # # */
+ 0x00, 0x48, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1136 'g' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x58, 0x40, /* # ## # */
+ 0x90, 0x40, /* # # # */
+ 0x90, 0x40, /* # # # */
+ 0x7F, 0xC0, /* ######### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1152 'h' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF8, /* ########## */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1168 'i' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xC8, /* ####### # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1184 'j' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x80, 0x40, /* # # */
+ 0x80, 0x40, /* # # */
+ 0x7F, 0xC8, /* ######### # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1200 'k' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF8, /* ########## */
+ 0x02, 0x00, /* # */
+ 0x05, 0x00, /* # # */
+ 0x08, 0x80, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1216 'l' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x08, /* # */
+ 0x00, 0x08, /* # */
+ 0x0F, 0xF8, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1232 'm' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1248 'n' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1264 'o' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x0F, 0x80, /* ##### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1280 'p' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0xFF, 0xC0, /* ########## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x0F, 0x80, /* ##### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1296 'q' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0xFF, 0xC0, /* ########## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1312 'r' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1328 's' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x09, 0x80, /* # ## */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x0C, 0x80, /* ## # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1344 't' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1360 'u' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xC0, /* ###### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1376 'v' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1392 'w' (8 pixels wide) */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0x00, /* ### */
+ 0x1C, 0x00, /* ### */
+ 0x03, 0x00, /* ## */
+ 0x1C, 0x00, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @1408 'x' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x40, /* # # */
+ 0x0D, 0x80, /* ## ## */
+ 0x02, 0x00, /* # */
+ 0x0D, 0x80, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1424 'y' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x80, 0xC0, /* # ## */
+ 0xCF, 0x00, /* ## #### */
+ 0x38, 0x00, /* ### */
+ 0x07, 0x00, /* ### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1440 'z' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x40, /* ## # */
+ 0x14, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x11, 0x40, /* # # # */
+ 0x10, 0xC0, /* # ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1456 '{' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x3E, 0xF8, /* ##### ##### */
+ 0x20, 0x08, /* # # */
+ 0x20, 0x08, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1472 '|' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x7F, 0xF8, /* ############ */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1488 '}' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x20, 0x08, /* # # */
+ 0x20, 0x08, /* # # */
+ 0x3E, 0xF8, /* ##### ##### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1504 '~' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x00, 0x00, /* */
+};
+
+/* Character descriptors for Bitstream Vera Sans Mono 9pt */
+/* { [Char width in bits], [Offset into bitstreamVeraSansMono9ptCharBitmaps in bytes] } */
+const FONT_CHAR_INFO bitstreamVeraSansMono9ptCharDescriptors[] =
+{
+ {8, 0}, /* */
+ {8, 16}, /* ! */
+ {8, 32}, /* " */
+ {8, 48}, /* # */
+ {8, 64}, /* $ */
+ {8, 80}, /* % */
+ {8, 96}, /* & */
+ {8, 112}, /* ' */
+ {8, 128}, /* ( */
+ {8, 144}, /* ) */
+ {8, 160}, /* * */
+ {8, 176}, /* + */
+ {8, 192}, /* , */
+ {8, 208}, /* - */
+ {8, 224}, /* . */
+ {8, 240}, /* / */
+ {8, 256}, /* 0 */
+ {8, 272}, /* 1 */
+ {8, 288}, /* 2 */
+ {8, 304}, /* 3 */
+ {8, 320}, /* 4 */
+ {8, 336}, /* 5 */
+ {8, 352}, /* 6 */
+ {8, 368}, /* 7 */
+ {8, 384}, /* 8 */
+ {8, 400}, /* 9 */
+ {8, 416}, /* : */
+ {8, 432}, /* ; */
+ {8, 448}, /* < */
+ {8, 464}, /* = */
+ {8, 480}, /* > */
+ {8, 496}, /* ? */
+ {8, 512}, /* @ */
+ {8, 528}, /* A */
+ {8, 544}, /* B */
+ {8, 560}, /* C */
+ {8, 576}, /* D */
+ {8, 592}, /* E */
+ {8, 608}, /* F */
+ {8, 624}, /* G */
+ {8, 640}, /* H */
+ {8, 656}, /* I */
+ {8, 672}, /* J */
+ {8, 688}, /* K */
+ {8, 704}, /* L */
+ {8, 720}, /* M */
+ {8, 736}, /* N */
+ {8, 752}, /* O */
+ {8, 768}, /* P */
+ {8, 784}, /* Q */
+ {8, 800}, /* R */
+ {8, 816}, /* S */
+ {8, 832}, /* T */
+ {8, 848}, /* U */
+ {8, 864}, /* V */
+ {8, 880}, /* W */
+ {8, 896}, /* X */
+ {8, 912}, /* Y */
+ {8, 928}, /* Z */
+ {8, 944}, /* [ */
+ {8, 960}, /* \ */
+ {8, 976}, /* ] */
+ {8, 992}, /* ^ */
+ {8, 1008}, /* _ */
+ {8, 1024}, /* ` */
+ {8, 1040}, /* a */
+ {8, 1056}, /* b */
+ {8, 1072}, /* c */
+ {8, 1088}, /* d */
+ {8, 1104}, /* e */
+ {8, 1120}, /* f */
+ {8, 1136}, /* g */
+ {8, 1152}, /* h */
+ {8, 1168}, /* i */
+ {8, 1184}, /* j */
+ {8, 1200}, /* k */
+ {8, 1216}, /* l */
+ {8, 1232}, /* m */
+ {8, 1248}, /* n */
+ {8, 1264}, /* o */
+ {8, 1280}, /* p */
+ {8, 1296}, /* q */
+ {8, 1312}, /* r */
+ {8, 1328}, /* s */
+ {8, 1344}, /* t */
+ {8, 1360}, /* u */
+ {8, 1376}, /* v */
+ {8, 1392}, /* w */
+ {8, 1408}, /* x */
+ {8, 1424}, /* y */
+ {8, 1440}, /* z */
+ {8, 1456}, /* { */
+ {8, 1472}, /* | */
+ {8, 1488}, /* } */
+ {8, 1504}, /* ~ */
+};
+
+/* Font information for Bitstream Vera Sans Mono 9pt */
+const FONT_INFO bitstreamVeraSansMono9ptFontInfo =
+{
+ 2, /* Character height */
+ ' ', /* Start character */
+ bitstreamVeraSansMono9ptCharDescriptors, /* Character decriptor array */
+ bitstreamVeraSansMono9ptCharBitmaps, /* Character bitmap array */
+};
--- /dev/null
+#ifndef __VERA_MONO_9__
+#define __VERA_MONO_9__
+
+#include "bitmapfonts.h"
+
+/* Font data for Bitstream Vera Sans Mono 9pt */
+extern const uint8_t bitstreamVeraSansMono9ptCharBitmaps[];
+extern const FONT_CHAR_INFO bitstreamVeraSansMono9ptCharDescriptors[];
+extern const FONT_INFO bitstreamVeraSansMono9ptFontInfo;
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "veramonobold11.h"
+
+/*
+** Font data for Bitstream Vera Sans Mono Bold 11pt
+*/
+
+/* Character bitmaps for Bitstream Vera Sans Mono Bold 11pt */
+const uint8_t bitstreamVeraSansMonoBold11ptCharBitmaps[] =
+{
+ /* @0 ' ' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @18 '!' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x0D, 0xFE, /* ## ######## */
+ 0x0D, 0xFE, /* ## ######## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @36 '"' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @54 '#' (9 pixels wide) */
+ 0x01, 0x00, /* # */
+ 0x0F, 0x10, /* #### # */
+ 0x0F, 0xF0, /* ######## */
+ 0x01, 0xFE, /* ######## */
+ 0x0D, 0x1E, /* ## # #### */
+ 0x0F, 0xF0, /* ######## */
+ 0x01, 0xFC, /* ####### */
+ 0x01, 0x1E, /* # #### */
+ 0x00, 0x10, /* # */
+
+ /* @72 '$' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x38, /* # ### */
+ 0x0C, 0x7C, /* ## ##### */
+ 0x08, 0x64, /* # ## # */
+ 0x3F, 0xFF, /* ############## */
+ 0x08, 0xC4, /* # ## # */
+ 0x0F, 0xCC, /* ###### ## */
+ 0x07, 0x80, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @90 '%' (9 pixels wide) */
+ 0x00, 0x9C, /* # ### */
+ 0x00, 0xA2, /* # # # */
+ 0x00, 0xA2, /* # # # */
+ 0x00, 0x62, /* ## # */
+ 0x07, 0x5C, /* ### # ### */
+ 0x08, 0xC0, /* # ## */
+ 0x08, 0xC0, /* # ## */
+ 0x08, 0xA0, /* # # # */
+ 0x07, 0x20, /* ### # */
+
+ /* @108 '&' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x80, /* #### */
+ 0x0F, 0xEC, /* ####### ## */
+ 0x0C, 0x7E, /* ## ###### */
+ 0x0B, 0xE2, /* # ##### # */
+ 0x0F, 0x82, /* ##### # */
+ 0x0F, 0xC0, /* ###### */
+ 0x09, 0xC0, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @126 ''' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x1E, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @144 '(' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x07, 0xF0, /* ####### */
+ 0x1F, 0xFC, /* ########### */
+ 0x38, 0x0E, /* ### ### */
+ 0x20, 0x02, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @162 ')' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x02, /* # # */
+ 0x38, 0x0E, /* ### ### */
+ 0x1F, 0xFC, /* ########### */
+ 0x07, 0xF0, /* ####### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @180 '*' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x24, /* # # */
+ 0x00, 0x3C, /* #### */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x7E, /* ###### */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x3C, /* #### */
+ 0x00, 0x24, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @198 '+' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0xF8, /* ######## */
+ 0x07, 0xF8, /* ######## */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0xC0, /* ## */
+
+ /* @216 ',' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x3E, 0x00, /* ##### */
+ 0x1E, 0x00, /* #### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @234 '-' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x01, 0x80, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @252 '.' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x0E, 0x00, /* ### */
+ 0x0E, 0x00, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @270 '/' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x00, /* # */
+ 0x1C, 0x00, /* ### */
+ 0x0F, 0x00, /* #### */
+ 0x03, 0xC0, /* #### */
+ 0x00, 0xF0, /* #### */
+ 0x00, 0x3C, /* #### */
+ 0x00, 0x0E, /* ### */
+ 0x00, 0x02, /* # */
+
+ /* @288 '0' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xF8, /* ####### */
+ 0x07, 0xFC, /* ######### */
+ 0x0C, 0x06, /* ## ## */
+ 0x08, 0x62, /* # ## # */
+ 0x0C, 0x06, /* ## ## */
+ 0x07, 0xFC, /* ######### */
+ 0x03, 0xF8, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @306 '1' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x08, 0x04, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @324 '2' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x04, /* ## # */
+ 0x0E, 0x02, /* ### # */
+ 0x0F, 0x02, /* #### # */
+ 0x0B, 0x82, /* # ### # */
+ 0x09, 0xE2, /* # #### # */
+ 0x08, 0xFC, /* # ###### */
+ 0x08, 0x7C, /* # ##### */
+ 0x00, 0x00, /* */
+
+ /* @342 '3' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x04, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x22, /* # # # */
+ 0x08, 0x22, /* # # # */
+ 0x0C, 0x62, /* ## ## # */
+ 0x07, 0xDE, /* ##### #### */
+ 0x07, 0x9C, /* #### ### */
+ 0x00, 0x00, /* */
+
+ /* @360 '4' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0xC0, /* ### */
+ 0x01, 0x60, /* # ## */
+ 0x01, 0x38, /* # ### */
+ 0x01, 0x0C, /* # ## */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x01, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @378 '5' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x7E, /* # ###### */
+ 0x08, 0x3E, /* # ##### */
+ 0x08, 0x22, /* # # # */
+ 0x08, 0x22, /* # # # */
+ 0x0C, 0x62, /* ## ## # */
+ 0x07, 0xC2, /* ##### # */
+ 0x03, 0x80, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @396 '6' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xF8, /* ####### */
+ 0x07, 0xFC, /* ######### */
+ 0x08, 0x26, /* # # ## */
+ 0x08, 0x22, /* # # # */
+ 0x08, 0x22, /* # # # */
+ 0x0F, 0xE4, /* ####### # */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @414 '7' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x02, /* # */
+ 0x08, 0x02, /* # # */
+ 0x0F, 0x02, /* #### # */
+ 0x07, 0xC2, /* ##### # */
+ 0x01, 0xFA, /* ###### # */
+ 0x00, 0x3E, /* ##### */
+ 0x00, 0x0E, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @432 '8' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x9C, /* #### ### */
+ 0x0F, 0xDE, /* ###### #### */
+ 0x0C, 0x62, /* ## ## # */
+ 0x08, 0x22, /* # # # */
+ 0x0C, 0x62, /* ## ## # */
+ 0x0F, 0xDE, /* ###### #### */
+ 0x07, 0x9C, /* #### ### */
+ 0x00, 0x00, /* */
+
+ /* @450 '9' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x7C, /* ##### */
+ 0x04, 0xFE, /* # ####### */
+ 0x08, 0x82, /* # # # */
+ 0x08, 0x82, /* # # # */
+ 0x0C, 0x82, /* ## # # */
+ 0x07, 0xFC, /* ######### */
+ 0x03, 0xF8, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @468 ':' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x0E, 0x70, /* ### ### */
+ 0x0E, 0x70, /* ### ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @486 ';' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x3E, 0x70, /* ##### ### */
+ 0x1E, 0x70, /* #### ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @504 '<' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x01, 0xE0, /* #### */
+ 0x01, 0x20, /* # # */
+ 0x03, 0x30, /* ## ## */
+ 0x03, 0x30, /* ## ## */
+ 0x02, 0x10, /* # # */
+ 0x06, 0x18, /* ## ## */
+
+ /* @522 '=' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0x30, /* ## ## */
+ 0x03, 0x30, /* ## ## */
+ 0x03, 0x30, /* ## ## */
+ 0x03, 0x30, /* ## ## */
+ 0x03, 0x30, /* ## ## */
+ 0x03, 0x30, /* ## ## */
+ 0x03, 0x30, /* ## ## */
+ 0x03, 0x30, /* ## ## */
+
+ /* @540 '>' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x06, 0x18, /* ## ## */
+ 0x02, 0x10, /* # # */
+ 0x03, 0x30, /* ## ## */
+ 0x03, 0x30, /* ## ## */
+ 0x01, 0x20, /* # # */
+ 0x01, 0xE0, /* #### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0xC0, /* ## */
+
+ /* @558 '?' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x04, /* # */
+ 0x00, 0x02, /* # */
+ 0x0D, 0xE2, /* ## #### # */
+ 0x0D, 0xF2, /* ## ##### # */
+ 0x00, 0x3E, /* ##### */
+ 0x00, 0x1C, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @576 '@' (9 pixels wide) */
+ 0x0F, 0xE0, /* ####### */
+ 0x1F, 0xF0, /* ######### */
+ 0x30, 0x18, /* ## ## */
+ 0x67, 0xC4, /* ## ##### # */
+ 0x4F, 0xE4, /* # ####### # */
+ 0x48, 0x24, /* # # # # */
+ 0x6F, 0xFC, /* ## ########## */
+ 0x4F, 0xF8, /* # ######### */
+ 0x00, 0x00, /* */
+
+ /* @594 'A' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x00, /* ## */
+ 0x0F, 0xE0, /* ####### */
+ 0x07, 0xFE, /* ########## */
+ 0x01, 0x1E, /* # #### */
+ 0x07, 0xFE, /* ########## */
+ 0x0F, 0xE0, /* ####### */
+ 0x0C, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @612 'B' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x0F, 0xBE, /* ##### ##### */
+ 0x07, 0xBC, /* #### #### */
+ 0x00, 0x00, /* */
+
+ /* @630 'C' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0xF0, /* ##### */
+ 0x07, 0xFC, /* ######### */
+ 0x0C, 0x06, /* ## ## */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x04, 0x04, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @648 'D' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x0C, 0x06, /* ## ## */
+ 0x07, 0xFC, /* ######### */
+ 0x03, 0xF8, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @666 'E' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x42, /* # # # */
+ 0x08, 0x02, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @684 'F' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x42, /* # # */
+ 0x00, 0x02, /* # */
+ 0x00, 0x00, /* */
+
+ /* @702 'G' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xF0, /* ###### */
+ 0x07, 0xFC, /* ######### */
+ 0x0C, 0x06, /* ## ## */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x82, /* # # # */
+ 0x0F, 0x82, /* ##### # */
+ 0x0F, 0x84, /* ##### # */
+ 0x00, 0x00, /* */
+
+ /* @720 'H' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @738 'I' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @756 'J' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x08, 0x02, /* # # */
+ 0x0F, 0xFE, /* ########### */
+ 0x07, 0xFE, /* ########## */
+ 0x00, 0x00, /* */
+
+ /* @774 'K' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0xF8, /* ##### */
+ 0x03, 0xDC, /* #### ### */
+ 0x0F, 0x8E, /* ##### ### */
+ 0x0E, 0x06, /* ### ## */
+ 0x08, 0x00, /* # */
+
+ /* @792 'L' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @810 'M' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x7E, /* ###### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x7E, /* ###### */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @828 'N' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x3E, /* ##### */
+ 0x01, 0xF0, /* ##### */
+ 0x0F, 0x80, /* ##### */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @846 'O' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xF8, /* ####### */
+ 0x07, 0xFC, /* ######### */
+ 0x0C, 0x06, /* ## ## */
+ 0x08, 0x02, /* # # */
+ 0x0C, 0x06, /* ## ## */
+ 0x07, 0xFC, /* ######### */
+ 0x03, 0xF8, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @864 'P' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x82, /* # # */
+ 0x00, 0x82, /* # # */
+ 0x00, 0xC6, /* ## ## */
+ 0x00, 0xFE, /* ####### */
+ 0x00, 0x7C, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @882 'Q' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xF8, /* ####### */
+ 0x07, 0xFC, /* ######### */
+ 0x0C, 0x06, /* ## ## */
+ 0x08, 0x02, /* # # */
+ 0x1C, 0x06, /* ### ## */
+ 0x3F, 0xFC, /* ############ */
+ 0x03, 0xF8, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @900 'R' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x82, /* # # */
+ 0x00, 0x82, /* # # */
+ 0x03, 0x82, /* ### # */
+ 0x0F, 0x7E, /* #### ###### */
+ 0x0E, 0x7C, /* ### ##### */
+ 0x08, 0x00, /* # */
+
+ /* @918 'S' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0x3C, /* # #### */
+ 0x08, 0x7C, /* # ##### */
+ 0x08, 0x62, /* # ## # */
+ 0x08, 0xE2, /* # ### # */
+ 0x08, 0xC2, /* # ## # */
+ 0x0F, 0xC2, /* ###### # */
+ 0x07, 0x84, /* #### # */
+ 0x00, 0x00, /* */
+
+ /* @936 'T' (9 pixels wide) */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x00, 0x00, /* */
+
+ /* @954 'U' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xFE, /* ########## */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x0F, 0xFE, /* ########### */
+ 0x07, 0xFE, /* ########## */
+ 0x00, 0x00, /* */
+
+ /* @972 'V' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x06, /* ## */
+ 0x00, 0xFE, /* ####### */
+ 0x0F, 0xF8, /* ######### */
+ 0x0E, 0x00, /* ### */
+ 0x0F, 0xF8, /* ######### */
+ 0x00, 0xFE, /* ####### */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @990 'W' (9 pixels wide) */
+ 0x00, 0x3E, /* ##### */
+ 0x0F, 0xFE, /* ########### */
+ 0x0E, 0x00, /* ### */
+ 0x03, 0xE0, /* ##### */
+ 0x00, 0x70, /* ### */
+ 0x03, 0xE0, /* ##### */
+ 0x0E, 0x00, /* ### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x3E, /* ##### */
+
+ /* @1008 'X' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x02, /* # # */
+ 0x0E, 0x0E, /* ### ### */
+ 0x07, 0xBC, /* #### #### */
+ 0x01, 0xF0, /* ##### */
+ 0x07, 0xBC, /* #### #### */
+ 0x0E, 0x0E, /* ### ### */
+ 0x08, 0x02, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1026 'Y' (9 pixels wide) */
+ 0x00, 0x02, /* # */
+ 0x00, 0x0E, /* ### */
+ 0x00, 0x7E, /* ###### */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x7E, /* ###### */
+ 0x00, 0x0E, /* ### */
+ 0x00, 0x02, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1044 'Z' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0E, 0x02, /* ### # */
+ 0x0F, 0x02, /* #### # */
+ 0x0B, 0xC2, /* # #### # */
+ 0x08, 0xF2, /* # #### # */
+ 0x08, 0x7A, /* # #### # */
+ 0x08, 0x1E, /* # #### */
+ 0x08, 0x0E, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @1062 '[' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x3F, 0xFE, /* ############# */
+ 0x3F, 0xFE, /* ############# */
+ 0x20, 0x02, /* # # */
+ 0x20, 0x02, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1080 '\' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x02, /* # */
+ 0x00, 0x0E, /* ### */
+ 0x00, 0x78, /* #### */
+ 0x01, 0xE0, /* #### */
+ 0x07, 0x80, /* #### */
+ 0x1C, 0x00, /* ### */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1098 ']' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x02, /* # # */
+ 0x20, 0x02, /* # # */
+ 0x3F, 0xFE, /* ############# */
+ 0x3F, 0xFE, /* ############# */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1116 '^' (9 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x0C, /* ## */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x0C, /* ## */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1134 '_' (9 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+
+ /* @1152 '`' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x01, /* # */
+ 0x00, 0x03, /* ## */
+ 0x00, 0x06, /* ## */
+ 0x00, 0x04, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1170 'a' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x00, /* ### */
+ 0x0F, 0xA0, /* ##### # */
+ 0x08, 0x90, /* # # # */
+ 0x08, 0x90, /* # # # */
+ 0x0C, 0x90, /* ## # # */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1188 'b' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x0C, 0x30, /* ## ## */
+ 0x08, 0x10, /* # # */
+ 0x0C, 0x30, /* ## ## */
+ 0x0F, 0xF0, /* ######## */
+ 0x07, 0xE0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @1206 'c' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x07, 0xE0, /* ###### */
+ 0x0C, 0x30, /* ## ## */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x04, 0x20, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1224 'd' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xE0, /* ###### */
+ 0x0F, 0xF0, /* ######## */
+ 0x0C, 0x30, /* ## ## */
+ 0x08, 0x10, /* # # */
+ 0x0C, 0x30, /* ## ## */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @1242 'e' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x07, 0xE0, /* ###### */
+ 0x0C, 0x90, /* ## # # */
+ 0x08, 0x90, /* # # # */
+ 0x08, 0x90, /* # # # */
+ 0x08, 0xF0, /* # #### */
+ 0x04, 0xE0, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @1260 'f' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xFC, /* ########## */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x12, /* # # */
+ 0x00, 0x12, /* # # */
+ 0x00, 0x12, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1278 'g' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x2F, 0xF0, /* # ######## */
+ 0x4C, 0x30, /* # ## ## */
+ 0x48, 0x10, /* # # # */
+ 0x4C, 0x30, /* # ## ## */
+ 0x7F, 0xF0, /* ########### */
+ 0x3F, 0xF0, /* ########## */
+ 0x00, 0x00, /* */
+
+ /* @1296 'h' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1314 'i' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x00, /* # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x0F, 0xF7, /* ######## ### */
+ 0x0F, 0xF7, /* ######## ### */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+
+ /* @1332 'j' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x40, 0x00, /* # */
+ 0x40, 0x10, /* # # */
+ 0x40, 0x10, /* # # */
+ 0x7F, 0xF7, /* ########### ### */
+ 0x3F, 0xF7, /* ########## ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1350 'k' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xFE, /* ########### */
+ 0x0F, 0xFE, /* ########### */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0xE0, /* ##### */
+ 0x0F, 0x30, /* #### ## */
+ 0x0C, 0x10, /* ## # */
+ 0x08, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1368 'l' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x02, /* # */
+ 0x00, 0x02, /* # */
+ 0x07, 0xFE, /* ########## */
+ 0x0F, 0xFE, /* ########### */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1386 'm' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xF0, /* ######## */
+
+ /* @1404 'n' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xE0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1422 'o' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0xC0, /* #### */
+ 0x07, 0xE0, /* ###### */
+ 0x0C, 0x30, /* ## ## */
+ 0x08, 0x10, /* # # */
+ 0x0C, 0x30, /* ## ## */
+ 0x07, 0xE0, /* ###### */
+ 0x03, 0xC0, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @1440 'p' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x7F, 0xF0, /* ########### */
+ 0x7F, 0xF0, /* ########### */
+ 0x0C, 0x30, /* ## ## */
+ 0x08, 0x10, /* # # */
+ 0x0C, 0x30, /* ## ## */
+ 0x0F, 0xF0, /* ######## */
+ 0x07, 0xE0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @1458 'q' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xE0, /* ###### */
+ 0x0F, 0xF0, /* ######## */
+ 0x0C, 0x30, /* ## ## */
+ 0x08, 0x10, /* # # */
+ 0x0C, 0x30, /* ## ## */
+ 0x7F, 0xF0, /* ########### */
+ 0x7F, 0xF0, /* ########### */
+ 0x00, 0x00, /* */
+
+ /* @1476 'r' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1494 's' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x04, 0xE0, /* # ### */
+ 0x08, 0xF0, /* # #### */
+ 0x09, 0x90, /* # ## # */
+ 0x09, 0x90, /* # ## # */
+ 0x09, 0x90, /* # ## # */
+ 0x0F, 0x10, /* #### # */
+ 0x07, 0x20, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @1512 't' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x07, 0xFC, /* ######### */
+ 0x0F, 0xFC, /* ########## */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x08, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1530 'u' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xF0, /* ####### */
+ 0x0F, 0xF0, /* ######## */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x08, 0x00, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @1548 'v' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x30, /* ## */
+ 0x01, 0xF0, /* ##### */
+ 0x0F, 0xE0, /* ####### */
+ 0x0C, 0x00, /* ## */
+ 0x0F, 0xE0, /* ####### */
+ 0x01, 0xF0, /* ##### */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @1566 'w' (9 pixels wide) */
+ 0x00, 0x70, /* ### */
+ 0x0F, 0xF0, /* ######## */
+ 0x0F, 0x00, /* #### */
+ 0x03, 0x80, /* ### */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0x80, /* ### */
+ 0x0F, 0x00, /* #### */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x70, /* ### */
+
+ /* @1584 'x' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x10, /* # # */
+ 0x0C, 0x30, /* ## ## */
+ 0x0F, 0xF0, /* ######## */
+ 0x03, 0xC0, /* #### */
+ 0x0F, 0xF0, /* ######## */
+ 0x0E, 0x30, /* ### ## */
+ 0x08, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1602 'y' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x40, 0xF0, /* # #### */
+ 0x63, 0xE0, /* ## ##### */
+ 0x7F, 0x00, /* ####### */
+ 0x1F, 0xE0, /* ######## */
+ 0x01, 0xF0, /* ##### */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @1620 'z' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x10, /* ## # */
+ 0x0E, 0x10, /* ### # */
+ 0x0B, 0x10, /* # ## # */
+ 0x09, 0x90, /* # ## # */
+ 0x08, 0xD0, /* # ## # */
+ 0x08, 0x70, /* # ### */
+ 0x08, 0x30, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @1638 '{' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x3E, 0xFC, /* ##### ###### */
+ 0x7E, 0xFE, /* ###### ####### */
+ 0x40, 0x02, /* # # */
+ 0x40, 0x02, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1656 '|' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0xFF, 0xFE, /* ############### */
+ 0xFF, 0xFE, /* ############### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1674 '}' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x40, 0x02, /* # # */
+ 0x40, 0x02, /* # # */
+ 0x7E, 0xFE, /* ###### ####### */
+ 0x3E, 0xFC, /* ##### ###### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1692 '~' (9 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x80, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0xC0, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x00, 0xC0, /* ## */
+};
+
+/* Character descriptors for Bitstream Vera Sans Mono 11pt */
+/* { [Char width in bits], [Offset into bitstreamVeraSansMonoBold11ptCharBitmaps in bytes] } */
+const FONT_CHAR_INFO bitstreamVeraSansMonoBold11ptCharDescriptors[] =
+{
+ {9, 0}, /* */
+ {9, 18}, /* ! */
+ {9, 36}, /* " */
+ {9, 54}, /* # */
+ {9, 72}, /* $ */
+ {9, 90}, /* % */
+ {9, 108}, /* & */
+ {9, 126}, /* ' */
+ {9, 144}, /* ( */
+ {9, 162}, /* ) */
+ {9, 180}, /* * */
+ {9, 198}, /* + */
+ {9, 216}, /* , */
+ {9, 234}, /* - */
+ {9, 252}, /* . */
+ {9, 270}, /* / */
+ {9, 288}, /* 0 */
+ {9, 306}, /* 1 */
+ {9, 324}, /* 2 */
+ {9, 342}, /* 3 */
+ {9, 360}, /* 4 */
+ {9, 378}, /* 5 */
+ {9, 396}, /* 6 */
+ {9, 414}, /* 7 */
+ {9, 432}, /* 8 */
+ {9, 450}, /* 9 */
+ {9, 468}, /* : */
+ {9, 486}, /* ; */
+ {9, 504}, /* < */
+ {9, 522}, /* = */
+ {9, 540}, /* > */
+ {9, 558}, /* ? */
+ {9, 576}, /* @ */
+ {9, 594}, /* A */
+ {9, 612}, /* B */
+ {9, 630}, /* C */
+ {9, 648}, /* D */
+ {9, 666}, /* E */
+ {9, 684}, /* F */
+ {9, 702}, /* G */
+ {9, 720}, /* H */
+ {9, 738}, /* I */
+ {9, 756}, /* J */
+ {9, 774}, /* K */
+ {9, 792}, /* L */
+ {9, 810}, /* M */
+ {9, 828}, /* N */
+ {9, 846}, /* O */
+ {9, 864}, /* P */
+ {9, 882}, /* Q */
+ {9, 900}, /* R */
+ {9, 918}, /* S */
+ {9, 936}, /* T */
+ {9, 954}, /* U */
+ {9, 972}, /* V */
+ {9, 990}, /* W */
+ {9, 1008}, /* X */
+ {9, 1026}, /* Y */
+ {9, 1044}, /* Z */
+ {9, 1062}, /* [ */
+ {9, 1080}, /* \ */
+ {9, 1098}, /* ] */
+ {9, 1116}, /* ^ */
+ {9, 1134}, /* _ */
+ {9, 1152}, /* ` */
+ {9, 1170}, /* a */
+ {9, 1188}, /* b */
+ {9, 1206}, /* c */
+ {9, 1224}, /* d */
+ {9, 1242}, /* e */
+ {9, 1260}, /* f */
+ {9, 1278}, /* g */
+ {9, 1296}, /* h */
+ {9, 1314}, /* i */
+ {9, 1332}, /* j */
+ {9, 1350}, /* k */
+ {9, 1368}, /* l */
+ {9, 1386}, /* m */
+ {9, 1404}, /* n */
+ {9, 1422}, /* o */
+ {9, 1440}, /* p */
+ {9, 1458}, /* q */
+ {9, 1476}, /* r */
+ {9, 1494}, /* s */
+ {9, 1512}, /* t */
+ {9, 1530}, /* u */
+ {9, 1548}, /* v */
+ {9, 1566}, /* w */
+ {9, 1584}, /* x */
+ {9, 1602}, /* y */
+ {9, 1620}, /* z */
+ {9, 1638}, /* { */
+ {9, 1656}, /* | */
+ {9, 1674}, /* } */
+ {9, 1692}, /* ~ */
+};
+
+/* Font information for Bitstream Vera Sans Mono 11pt */
+const FONT_INFO bitstreamVeraSansMonoBold11ptFontInfo =
+{
+ 2, /* Character height */
+ ' ', /* Start character */
+ bitstreamVeraSansMonoBold11ptCharDescriptors, /* Character decriptor array */
+ bitstreamVeraSansMonoBold11ptCharBitmaps, /* Character bitmap array */
+};
--- /dev/null
+#ifndef __VERA_MONO_BOLD_11__
+#define __VERA_MONO_BOLD_11__
+
+#include "bitmapfonts.h"
+
+/* Font data for Bitstream Vera Sans Mono Bold 11pt */
+extern const uint8_t bitstreamVeraSansMonoBold11ptCharBitmaps[];
+extern const FONT_CHAR_INFO bitstreamVeraSansMonoBold11ptCharDescriptors[];
+extern const FONT_INFO bitstreamVeraSansMonoBold11ptFontInfo;
+
+#endif
\ No newline at end of file
--- /dev/null
+#include "veramonobold9.h"
+
+/*
+** Font data for Bitstream Vera Sans Mono Bold 9pt
+*/
+
+/* Character bitmaps for Bitstream Vera Sans Mono Bold 9pt */
+const uint8_t bitstreamVeraSansMonoBold9ptCharBitmaps[] =
+{
+ /* @0 ' ' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @16 '!' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x1B, 0xF0, /* ## ###### */
+ 0x1B, 0xF0, /* ## ###### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @32 '"' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @48 '#' (8 pixels wide) */
+ 0x04, 0x00, /* # */
+ 0x1C, 0x80, /* ### # */
+ 0x07, 0xC0, /* ##### */
+ 0x1C, 0xE0, /* ### ### */
+ 0x0F, 0x80, /* ##### */
+ 0x04, 0xE0, /* # ### */
+ 0x00, 0x80, /* # */
+ 0x00, 0x00, /* */
+
+ /* @64 '$' (8 pixels wide) */
+ 0x08, 0xC0, /* # ## */
+ 0x19, 0xE0, /* ## #### */
+ 0x11, 0x20, /* # # # */
+ 0x7F, 0xF0, /* ########### */
+ 0x11, 0x20, /* # # # */
+ 0x1F, 0x60, /* ##### ## */
+ 0x0E, 0x00, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @80 '%' (8 pixels wide) */
+ 0x02, 0x60, /* # ## */
+ 0x02, 0x90, /* # # # */
+ 0x02, 0x90, /* # # # */
+ 0x0D, 0x60, /* ## # ## */
+ 0x13, 0x00, /* # ## */
+ 0x12, 0x80, /* # # # */
+ 0x0C, 0x80, /* ## # */
+ 0x00, 0x00, /* */
+
+ /* @96 '&' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0E, 0x00, /* ### */
+ 0x1F, 0x70, /* ##### ### */
+ 0x11, 0xF0, /* # ##### */
+ 0x1F, 0x10, /* ##### # */
+ 0x1C, 0x00, /* ### */
+ 0x17, 0x00, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @112 ''' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @128 '(' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x1F, 0xF0, /* ######### */
+ 0x30, 0x18, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @144 ')' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x30, 0x18, /* ## ## */
+ 0x1F, 0xF0, /* ######### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @160 '*' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x20, /* # # */
+ 0x00, 0xC0, /* ## */
+ 0x03, 0xF0, /* ###### */
+ 0x00, 0xC0, /* ## */
+ 0x01, 0x20, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @176 '+' (8 pixels wide) */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @192 ',' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x40, 0x00, /* # */
+ 0x38, 0x00, /* ### */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @208 '-' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @224 '.' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x18, 0x00, /* ## */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @240 '/' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x20, 0x00, /* # */
+ 0x18, 0x00, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x01, 0x80, /* ## */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @256 '0' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @272 '1' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @288 '2' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x20, /* ## # */
+ 0x1C, 0x10, /* ### # */
+ 0x16, 0x10, /* # ## # */
+ 0x13, 0x10, /* # ## # */
+ 0x11, 0xF0, /* # ##### */
+ 0x10, 0xE0, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @304 '3' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x20, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x1E, 0xF0, /* #### #### */
+ 0x0E, 0xE0, /* ### ### */
+ 0x00, 0x00, /* */
+
+ /* @320 '4' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x00, /* ### */
+ 0x05, 0x80, /* # ## */
+ 0x04, 0x60, /* # ## */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x04, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @336 '5' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0xF0, /* # #### */
+ 0x10, 0xF0, /* # #### */
+ 0x10, 0x90, /* # # # */
+ 0x11, 0x90, /* # ## # */
+ 0x1F, 0x90, /* ###### # */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @352 '6' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xC0, /* ###### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0xB0, /* # # ## */
+ 0x10, 0x90, /* # # # */
+ 0x1F, 0x90, /* ###### # */
+ 0x0F, 0x00, /* #### */
+ 0x00, 0x00, /* */
+
+ /* @368 '7' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x10, 0x10, /* # # */
+ 0x1E, 0x10, /* #### # */
+ 0x0F, 0xD0, /* ###### # */
+ 0x01, 0xF0, /* ##### */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @384 '8' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0E, 0xE0, /* ### ### */
+ 0x1E, 0xF0, /* #### #### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x1E, 0xF0, /* #### #### */
+ 0x0E, 0xE0, /* ### ### */
+ 0x00, 0x00, /* */
+
+ /* @400 '9' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0xE0, /* #### */
+ 0x13, 0xF0, /* # ###### */
+ 0x12, 0x10, /* # # # */
+ 0x1A, 0x10, /* ## # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x07, 0xE0, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @416 ':' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x19, 0x80, /* ## ## */
+ 0x19, 0x80, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @432 ';' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x40, 0x00, /* # */
+ 0x39, 0x80, /* ### ## */
+ 0x19, 0x80, /* ## ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @448 '<' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x07, 0x80, /* #### */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x0C, 0xC0, /* ## ## */
+ 0x00, 0x00, /* */
+
+ /* @464 '=' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x05, 0x00, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @480 '>' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0xC0, /* ## ## */
+ 0x04, 0x80, /* # # */
+ 0x04, 0x80, /* # # */
+ 0x07, 0x80, /* #### */
+ 0x03, 0x00, /* ## */
+ 0x03, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @496 '?' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x20, /* # */
+ 0x1B, 0x10, /* ## ## # */
+ 0x1B, 0x90, /* ## ### # */
+ 0x00, 0xF0, /* #### */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @512 '@' (8 pixels wide) */
+ 0x0F, 0x80, /* ##### */
+ 0x30, 0xC0, /* ## ## */
+ 0x6F, 0x20, /* ## #### # */
+ 0x50, 0xA0, /* # # # # */
+ 0x50, 0xA0, /* # # # # */
+ 0x50, 0xA0, /* # # # # */
+ 0x7F, 0xC0, /* ######### */
+ 0x00, 0x00, /* */
+
+ /* @528 'A' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x00, /* ## */
+ 0x1F, 0x80, /* ###### */
+ 0x05, 0xF0, /* # ##### */
+ 0x05, 0xF0, /* # ##### */
+ 0x1F, 0x80, /* ###### */
+ 0x18, 0x00, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @544 'B' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x1E, 0xF0, /* #### #### */
+ 0x0E, 0xE0, /* ### ### */
+ 0x00, 0x00, /* */
+
+ /* @560 'C' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x08, 0x20, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @576 'D' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x18, 0x30, /* ## ## */
+ 0x0F, 0xE0, /* ####### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @592 'E' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x11, 0x10, /* # # # */
+ 0x10, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @608 'F' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @624 'G' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x0F, 0xE0, /* ####### */
+ 0x18, 0x30, /* ## ## */
+ 0x12, 0x10, /* # # # */
+ 0x1E, 0x10, /* #### # */
+ 0x1E, 0x20, /* #### # */
+ 0x00, 0x00, /* */
+
+ /* @640 'H' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x00, /* */
+
+ /* @656 'I' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @672 'J' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @688 'K' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x80, /* ## */
+ 0x03, 0xC0, /* #### */
+ 0x0E, 0x70, /* ### ### */
+ 0x18, 0x30, /* ## ## */
+ 0x10, 0x00, /* # */
+
+ /* @704 'L' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @720 'M' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xE0, /* ######## */
+ 0x01, 0xC0, /* ### */
+ 0x01, 0xC0, /* ### */
+ 0x1F, 0xE0, /* ######## */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x00, /* */
+
+ /* @736 'N' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0xE0, /* #### */
+ 0x0F, 0x00, /* #### */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x00, /* */
+
+ /* @752 'O' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x1F, 0xF0, /* ######### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @768 'P' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x01, 0x10, /* # # */
+ 0x01, 0xF0, /* ##### */
+ 0x00, 0xE0, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @784 'Q' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0xC0, /* ##### */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x10, /* # # */
+ 0x10, 0x10, /* # # */
+ 0x3F, 0xF0, /* ########## */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @800 'R' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0x10, /* # # */
+ 0x03, 0x10, /* ## # */
+ 0x0E, 0xF0, /* ### #### */
+ 0x1C, 0xE0, /* ### ### */
+ 0x10, 0x00, /* # */
+
+ /* @816 'S' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x08, 0xE0, /* # ### */
+ 0x11, 0xF0, /* # ##### */
+ 0x11, 0x90, /* # ## # */
+ 0x13, 0x10, /* # ## # */
+ 0x1F, 0x10, /* ##### # */
+ 0x0E, 0x20, /* ### # */
+ 0x00, 0x00, /* */
+
+ /* @832 'T' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF0, /* ######### */
+ 0x00, 0x10, /* # */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+
+ /* @848 'U' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xF0, /* ######## */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x0F, 0xF0, /* ######## */
+ 0x00, 0x00, /* */
+
+ /* @864 'V' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x30, /* ## */
+ 0x07, 0xF0, /* ####### */
+ 0x1F, 0x00, /* ##### */
+ 0x1F, 0x00, /* ##### */
+ 0x07, 0xF0, /* ####### */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @880 'W' (8 pixels wide) */
+ 0x00, 0xF0, /* #### */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0x00, /* ##### */
+ 0x00, 0xC0, /* ## */
+ 0x1F, 0x00, /* ##### */
+ 0x1F, 0xF0, /* ######### */
+ 0x01, 0xF0, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @896 'X' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x10, /* # # */
+ 0x1C, 0x70, /* ### ### */
+ 0x07, 0xC0, /* ##### */
+ 0x07, 0xC0, /* ##### */
+ 0x1C, 0x70, /* ### ### */
+ 0x10, 0x10, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @912 'Y' (8 pixels wide) */
+ 0x00, 0x10, /* # */
+ 0x00, 0x70, /* ### */
+ 0x01, 0xE0, /* #### */
+ 0x1F, 0x80, /* ###### */
+ 0x1F, 0x80, /* ###### */
+ 0x01, 0xE0, /* #### */
+ 0x00, 0x70, /* ### */
+ 0x00, 0x10, /* # */
+
+ /* @928 'Z' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x10, /* ## # */
+ 0x1E, 0x10, /* #### # */
+ 0x17, 0x10, /* # ### # */
+ 0x11, 0xD0, /* # ### # */
+ 0x10, 0xF0, /* # #### */
+ 0x10, 0x30, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @944 '[' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x3F, 0xF8, /* ########### */
+ 0x3F, 0xF8, /* ########### */
+ 0x20, 0x08, /* # # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @960 '\' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x10, /* # */
+ 0x00, 0x70, /* ### */
+ 0x01, 0x80, /* ## */
+ 0x06, 0x00, /* ## */
+ 0x38, 0x00, /* ### */
+ 0x20, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @976 ']' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x20, 0x08, /* # # */
+ 0x3F, 0xF8, /* ########### */
+ 0x3F, 0xF8, /* ########### */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @992 '^' (8 pixels wide) */
+ 0x00, 0x40, /* # */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x10, /* # */
+ 0x00, 0x30, /* ## */
+ 0x00, 0x60, /* ## */
+ 0x00, 0x40, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1008 '_' (8 pixels wide) */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x80, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1024 '`' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x08, /* # */
+ 0x00, 0x18, /* ## */
+ 0x00, 0x10, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1040 'a' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0C, 0x00, /* ## */
+ 0x1E, 0x80, /* #### # */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @1056 'b' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF8, /* ########## */
+ 0x1F, 0xF8, /* ########## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xC0, /* ####### */
+ 0x0F, 0x80, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @1072 'c' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x07, 0x00, /* ### */
+ 0x0F, 0x80, /* ##### */
+ 0x18, 0xC0, /* ## ## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x08, 0x80, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1088 'd' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x1F, 0xC0, /* ####### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xF8, /* ########## */
+ 0x1F, 0xF8, /* ########## */
+ 0x00, 0x00, /* */
+
+ /* @1104 'e' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x1F, 0xC0, /* ####### */
+ 0x12, 0x40, /* # # # */
+ 0x12, 0x40, /* # # # */
+ 0x13, 0xC0, /* # #### */
+ 0x0B, 0x80, /* # ### */
+ 0x00, 0x00, /* */
+
+ /* @1120 'f' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xF0, /* ######### */
+ 0x1F, 0xF8, /* ########## */
+ 0x00, 0x48, /* # # */
+ 0x00, 0x48, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1136 'g' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x9F, 0xC0, /* # ####### */
+ 0x90, 0x40, /* # # # */
+ 0x90, 0x40, /* # # # */
+ 0xFF, 0xC0, /* ########## */
+ 0x7F, 0xC0, /* ######### */
+ 0x00, 0x00, /* */
+
+ /* @1152 'h' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF8, /* ########## */
+ 0x1F, 0xF8, /* ########## */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @1168 'i' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xD8, /* ####### ## */
+ 0x1F, 0xD8, /* ####### ## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1184 'j' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x80, 0x40, /* # # */
+ 0x80, 0x40, /* # # */
+ 0xFF, 0xD8, /* ########## ## */
+ 0x7F, 0xD8, /* ######### ## */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1200 'k' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xF8, /* ########## */
+ 0x1F, 0xF8, /* ########## */
+ 0x03, 0x00, /* ## */
+ 0x0F, 0x80, /* ##### */
+ 0x1C, 0xC0, /* ### ## */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1216 'l' (8 pixels wide) */
+ 0x00, 0x08, /* # */
+ 0x00, 0x08, /* # */
+ 0x0F, 0xF8, /* ######### */
+ 0x1F, 0xF8, /* ########## */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1232 'm' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1248 'n' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0x80, /* ###### */
+ 0x00, 0x00, /* */
+
+ /* @1264 'o' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x1F, 0xC0, /* ####### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xC0, /* ####### */
+ 0x0F, 0x80, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @1280 'p' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0xFF, 0xC0, /* ########## */
+ 0xFF, 0xC0, /* ########## */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x1F, 0xC0, /* ####### */
+ 0x0F, 0x80, /* ##### */
+ 0x00, 0x00, /* */
+
+ /* @1296 'q' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0x80, /* ##### */
+ 0x1F, 0xC0, /* ####### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0xFF, 0xC0, /* ########## */
+ 0xFF, 0xC0, /* ########## */
+ 0x00, 0x00, /* */
+
+ /* @1312 'r' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1328 's' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x09, 0x80, /* # ## */
+ 0x13, 0xC0, /* # #### */
+ 0x13, 0x40, /* # ## # */
+ 0x12, 0x40, /* # # # */
+ 0x1E, 0x40, /* #### # */
+ 0x0C, 0x80, /* ## # */
+ 0x00, 0x00, /* */
+
+ /* @1344 't' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x40, /* # */
+ 0x00, 0x40, /* # */
+ 0x0F, 0xF0, /* ######## */
+ 0x1F, 0xF0, /* ######### */
+ 0x10, 0x40, /* # # */
+ 0x10, 0x40, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1360 'u' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x0F, 0xC0, /* ###### */
+ 0x1F, 0xC0, /* ####### */
+ 0x10, 0x00, /* # */
+ 0x10, 0x00, /* # */
+ 0x1F, 0xC0, /* ####### */
+ 0x1F, 0xC0, /* ####### */
+ 0x00, 0x00, /* */
+
+ /* @1376 'v' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0xC0, /* ## */
+ 0x07, 0xC0, /* ##### */
+ 0x1E, 0x00, /* #### */
+ 0x1E, 0x00, /* #### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @1392 'w' (8 pixels wide) */
+ 0x01, 0xC0, /* ### */
+ 0x1F, 0xC0, /* ####### */
+ 0x1E, 0x00, /* #### */
+ 0x01, 0x00, /* # */
+ 0x1E, 0x00, /* #### */
+ 0x1F, 0xC0, /* ####### */
+ 0x01, 0xC0, /* ### */
+ 0x00, 0x00, /* */
+
+ /* @1408 'x' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x10, 0x40, /* # # */
+ 0x1D, 0xC0, /* ### ### */
+ 0x0F, 0x80, /* ##### */
+ 0x0F, 0x80, /* ##### */
+ 0x1D, 0xC0, /* ### ### */
+ 0x10, 0x40, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1424 'y' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x80, 0xC0, /* # ## */
+ 0x87, 0xC0, /* # ##### */
+ 0xFE, 0x00, /* ####### */
+ 0x3E, 0x00, /* ##### */
+ 0x07, 0xC0, /* ##### */
+ 0x00, 0xC0, /* ## */
+ 0x00, 0x00, /* */
+
+ /* @1440 'z' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x18, 0x40, /* ## # */
+ 0x1C, 0x40, /* ### # */
+ 0x16, 0x40, /* # ## # */
+ 0x13, 0x40, /* # ## # */
+ 0x11, 0xC0, /* # ### */
+ 0x10, 0xC0, /* # ## */
+ 0x00, 0x00, /* */
+
+ /* @1456 '{' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x1E, 0xF8, /* #### ##### */
+ 0x3E, 0xF8, /* ##### ##### */
+ 0x20, 0x08, /* # # */
+ 0x20, 0x08, /* # # */
+ 0x00, 0x00, /* */
+
+ /* @1472 '|' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x7F, 0xF8, /* ############ */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+ 0x00, 0x00, /* */
+
+ /* @1488 '}' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x20, 0x08, /* # # */
+ 0x20, 0x08, /* # # */
+ 0x3E, 0xF8, /* ##### ##### */
+ 0x3E, 0xF8, /* ##### ##### */
+ 0x01, 0x00, /* # */
+ 0x01, 0x00, /* # */
+ 0x00, 0x00, /* */
+
+ /* @1504 '~' (8 pixels wide) */
+ 0x00, 0x00, /* */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x02, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x04, 0x00, /* # */
+ 0x00, 0x00, /* */
+};
+
+/* Character descriptors for Bitstream Vera Sans Mono 9pt */
+/* { [Char width in bits], [Offset into bitstreamVeraSansMonoBold9ptCharBitmaps in bytes] } */
+const FONT_CHAR_INFO bitstreamVeraSansMonoBold9ptCharDescriptors[] =
+{
+ {8, 0}, /* */
+ {8, 16}, /* ! */
+ {8, 32}, /* " */
+ {8, 48}, /* # */
+ {8, 64}, /* $ */
+ {8, 80}, /* % */
+ {8, 96}, /* & */
+ {8, 112}, /* ' */
+ {8, 128}, /* ( */
+ {8, 144}, /* ) */
+ {8, 160}, /* * */
+ {8, 176}, /* + */
+ {8, 192}, /* , */
+ {8, 208}, /* - */
+ {8, 224}, /* . */
+ {8, 240}, /* / */
+ {8, 256}, /* 0 */
+ {8, 272}, /* 1 */
+ {8, 288}, /* 2 */
+ {8, 304}, /* 3 */
+ {8, 320}, /* 4 */
+ {8, 336}, /* 5 */
+ {8, 352}, /* 6 */
+ {8, 368}, /* 7 */
+ {8, 384}, /* 8 */
+ {8, 400}, /* 9 */
+ {8, 416}, /* : */
+ {8, 432}, /* ; */
+ {8, 448}, /* < */
+ {8, 464}, /* = */
+ {8, 480}, /* > */
+ {8, 496}, /* ? */
+ {8, 512}, /* @ */
+ {8, 528}, /* A */
+ {8, 544}, /* B */
+ {8, 560}, /* C */
+ {8, 576}, /* D */
+ {8, 592}, /* E */
+ {8, 608}, /* F */
+ {8, 624}, /* G */
+ {8, 640}, /* H */
+ {8, 656}, /* I */
+ {8, 672}, /* J */
+ {8, 688}, /* K */
+ {8, 704}, /* L */
+ {8, 720}, /* M */
+ {8, 736}, /* N */
+ {8, 752}, /* O */
+ {8, 768}, /* P */
+ {8, 784}, /* Q */
+ {8, 800}, /* R */
+ {8, 816}, /* S */
+ {8, 832}, /* T */
+ {8, 848}, /* U */
+ {8, 864}, /* V */
+ {8, 880}, /* W */
+ {8, 896}, /* X */
+ {8, 912}, /* Y */
+ {8, 928}, /* Z */
+ {8, 944}, /* [ */
+ {8, 960}, /* \ */
+ {8, 976}, /* ] */
+ {8, 992}, /* ^ */
+ {8, 1008}, /* _ */
+ {8, 1024}, /* ` */
+ {8, 1040}, /* a */
+ {8, 1056}, /* b */
+ {8, 1072}, /* c */
+ {8, 1088}, /* d */
+ {8, 1104}, /* e */
+ {8, 1120}, /* f */
+ {8, 1136}, /* g */
+ {8, 1152}, /* h */
+ {8, 1168}, /* i */
+ {8, 1184}, /* j */
+ {8, 1200}, /* k */
+ {8, 1216}, /* l */
+ {8, 1232}, /* m */
+ {8, 1248}, /* n */
+ {8, 1264}, /* o */
+ {8, 1280}, /* p */
+ {8, 1296}, /* q */
+ {8, 1312}, /* r */
+ {8, 1328}, /* s */
+ {8, 1344}, /* t */
+ {8, 1360}, /* u */
+ {8, 1376}, /* v */
+ {8, 1392}, /* w */
+ {8, 1408}, /* x */
+ {8, 1424}, /* y */
+ {8, 1440}, /* z */
+ {8, 1456}, /* { */
+ {8, 1472}, /* | */
+ {8, 1488}, /* } */
+ {8, 1504}, /* ~ */
+};
+
+/* Font information for Bitstream Vera Sans Mono 9pt */
+const FONT_INFO bitstreamVeraSansMonoBold9ptFontInfo =
+{
+ 2, /* Character height */
+ ' ', /* Start character */
+ bitstreamVeraSansMonoBold9ptCharDescriptors, /* Character decriptor array */
+ bitstreamVeraSansMonoBold9ptCharBitmaps, /* Character bitmap array */
+};
--- /dev/null
+#ifndef __VERA_MONO_BOLD_9__
+#define __VERA_MONO_BOLD_9__
+
+#include "bitmapfonts.h"
+
+/* Font data for Bitstream Vera Sans Mono Bold 9pt */
+extern const uint8_t bitstreamVeraSansMonoBold9ptCharBitmaps[];
+extern const FONT_CHAR_INFO bitstreamVeraSansMonoBold9ptCharDescriptors[];
+extern const FONT_INFO bitstreamVeraSansMonoBold9ptFontInfo;
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ILI9325.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section DESCRIPTION
+
+ Driver for ILI9325 240x320 pixel TFT LCD displays.
+
+ This driver uses an 8-bit interface and a 16-bit RGB565 colour palette.
+ Should also work with SPFD5408B or OTM3225A-based LCDs, though
+ there are sometimes minor differences (for example vertical scrolling
+ via register 0x6A isn't supported on all controllers).
+
+ @section UPDATES
+
+ 26-11-2010: ili9325ReadData contributed by Adafruit Industries
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "ILI9325.h"
+#include "core/systick/systick.h"
+#include "drivers/lcd/tft/touchscreen.h"
+
+static lcdOrientation_t lcdOrientation = LCD_ORIENTATION_PORTRAIT;
+static lcdProperties_t ili9325Properties = { 240, 320, TRUE, TRUE, TRUE };
+
+/*************************************************/
+/* Private Methods */
+/*************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Causes a brief delay (10 ticks per unit)
+*/
+/**************************************************************************/
+void ili9325Delay(unsigned int t)
+{
+ unsigned char t1;
+ while(t--)
+ for ( t1=10; t1 > 0; t1-- )
+ {
+ __asm("nop");
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes the supplied 16-bit command using an 8-bit interface
+*/
+/**************************************************************************/
+void ili9325WriteCmd(uint16_t command)
+{
+ // Compiled with -Os on GCC 4.4 this works out to 25 cycles
+ // (versus 36 compiled with no optimisations). I'm not sure it
+ // can be improved further, so that means 25 cycles/350nS for
+ // continuous writes (cmd, data, data, data, ...) or ~150 cycles/
+ // ~2.1uS for a random pixel (Set X [cmd+data], Set Y [cmd+data],
+ // Set color [cmd+data]) (times assumes 72MHz clock).
+
+ CLR_CS_CD_SET_RD_WR; // Saves 18 commands compared to "CLR_CS; CLR_CD; SET_RD; SET_WR;"
+ ILI9325_GPIO2DATA_DATA = (command >> (8 - ILI9325_DATA_OFFSET));
+ CLR_WR;
+ SET_WR;
+ ILI9325_GPIO2DATA_DATA = command << ILI9325_DATA_OFFSET;
+ CLR_WR;
+ SET_WR_CS; // Saves 7 commands compared to "SET_WR; SET_CS;"
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes the supplied 16-bit data using an 8-bit interface
+*/
+/**************************************************************************/
+void ili9325WriteData(uint16_t data)
+{
+ CLR_CS_SET_CD_RD_WR; // Saves 18 commands compared to SET_CD; SET_RD; SET_WR; CLR_CS"
+ ILI9325_GPIO2DATA_DATA = (data >> (8 - ILI9325_DATA_OFFSET));
+ CLR_WR;
+ SET_WR;
+ ILI9325_GPIO2DATA_DATA = data << ILI9325_DATA_OFFSET;
+ CLR_WR;
+ SET_WR_CS; // Saves 7 commands compared to "SET_WR, SET_CS;"
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a 16-bit value from the 8-bit data bus
+*/
+/**************************************************************************/
+uint16_t ili9325ReadData(void)
+{
+ // ToDo: Optimise this method!
+
+ uint16_t high, low;
+ high = low = 0;
+ uint16_t d;
+
+ SET_CD_RD_WR; // Saves 14 commands compared to "SET_CD; SET_RD; SET_WR"
+ CLR_CS;
+
+ // set inputs
+ ILI9325_GPIO2DATA_SETINPUT;
+ CLR_RD;
+ ili9325Delay(100);
+ high = ILI9325_GPIO2DATA_DATA;
+ high >>= ILI9325_DATA_OFFSET;
+ high &= 0xFF;
+ SET_RD;
+
+ CLR_RD;
+ ili9325Delay(100);
+ low = ILI9325_GPIO2DATA_DATA;
+ low >>= ILI9325_DATA_OFFSET;
+ low &=0xFF;
+ SET_RD;
+
+ SET_CS;
+ ILI9325_GPIO2DATA_SETOUTPUT;
+
+ d = high;
+ d <<= 8;
+ d |= low;
+
+ return d;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a 16-bit value
+*/
+/**************************************************************************/
+uint16_t ili9325Read(uint16_t addr)
+{
+ ili9325WriteCmd(addr);
+ return ili9325ReadData();
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends a 16-bit command + 16-bit data
+*/
+/**************************************************************************/
+void ili9325Command(uint16_t command, uint16_t data)
+{
+ ili9325WriteCmd(command);
+ ili9325WriteData(data);
+}
+
+/**************************************************************************/
+/*!
+ @brief Returns the 16-bit (4-hexdigit) controller code
+*/
+/**************************************************************************/
+uint16_t ili9325Type(void)
+{
+ ili9325WriteCmd(ILI9325_COMMANDS_DRIVERCODEREAD);
+ return ili9325ReadData();
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the cursor to the specified X/Y position
+*/
+/**************************************************************************/
+void ili9325SetCursor(uint16_t x, uint16_t y)
+{
+ uint16_t al, ah;
+
+ if (lcdOrientation == LCD_ORIENTATION_LANDSCAPE)
+ {
+ al = y;
+ ah = x;
+ }
+ else
+ {
+ al = x;
+ ah = y;
+ }
+
+ ili9325Command(ILI9325_COMMANDS_HORIZONTALGRAMADDRESSSET, al);
+ ili9325Command(ILI9325_COMMANDS_VERTICALGRAMADDRESSSET, ah);
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends the initialisation sequence to the display controller
+*/
+/**************************************************************************/
+void ili9325InitDisplay(void)
+{
+ // Clear data line
+ GPIO_GPIO2DATA &= ~ILI9325_DATA_MASK;
+
+ SET_RD;
+ SET_WR;
+ SET_CS;
+ SET_CD;
+
+ // Reset display
+ CLR_RESET;
+ ili9325Delay(10000);
+ SET_RESET;
+ ili9325Delay(500);
+
+ ili9325Command(ILI9325_COMMANDS_DRIVEROUTPUTCONTROL1, 0x0100); // Driver Output Control Register (R01h)
+ ili9325Command(ILI9325_COMMANDS_LCDDRIVINGCONTROL, 0x0700); // LCD Driving Waveform Control (R02h)
+ ili9325Command(ILI9325_COMMANDS_ENTRYMODE, 0x1030); // Entry Mode (R03h)
+ ili9325Command(ILI9325_COMMANDS_DISPLAYCONTROL2, 0x0302);
+ ili9325Command(ILI9325_COMMANDS_DISPLAYCONTROL3, 0x0000);
+ ili9325Command(ILI9325_COMMANDS_DISPLAYCONTROL4, 0x0000); // Fmark On
+ ili9325Command(ILI9325_COMMANDS_POWERCONTROL1, 0x0000); // Power Control 1 (R10h)
+ ili9325Command(ILI9325_COMMANDS_POWERCONTROL2, 0x0007); // Power Control 2 (R11h)
+ ili9325Command(ILI9325_COMMANDS_POWERCONTROL3, 0x0000); // Power Control 3 (R12h)
+ ili9325Command(ILI9325_COMMANDS_POWERCONTROL4, 0x0000); // Power Control 4 (R13h)
+ ili9325Delay(1000);
+ ili9325Command(ILI9325_COMMANDS_POWERCONTROL1, 0x14B0); // Power Control 1 (R10h)
+ ili9325Delay(500);
+ ili9325Command(ILI9325_COMMANDS_POWERCONTROL2, 0x0007); // Power Control 2 (R11h)
+ ili9325Delay(500);
+ ili9325Command(ILI9325_COMMANDS_POWERCONTROL3, 0x008E); // Power Control 3 (R12h)
+ ili9325Command(ILI9325_COMMANDS_POWERCONTROL4, 0x0C00); // Power Control 4 (R13h)
+ ili9325Command(ILI9325_COMMANDS_POWERCONTROL7, 0x0015); // NVM read data 2 (R29h)
+ ili9325Delay(500);
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL1, 0x0000); // Gamma Control 1
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL2, 0x0107); // Gamma Control 2
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL3, 0x0000); // Gamma Control 3
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL4, 0x0203); // Gamma Control 4
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL5, 0x0402); // Gamma Control 5
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL6, 0x0000); // Gamma Control 6
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL7, 0x0207); // Gamma Control 7
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL8, 0x0000); // Gamma Control 8
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL9, 0x0203); // Gamma Control 9
+ ili9325Command(ILI9325_COMMANDS_GAMMACONTROL10, 0x0403); // Gamma Control 10
+ ili9325Command(ILI9325_COMMANDS_HORIZONTALADDRESSSTARTPOSITION, 0x0000); // Window Horizontal RAM Address Start (R50h)
+ ili9325Command(ILI9325_COMMANDS_HORIZONTALADDRESSENDPOSITION, ili9325Properties.width - 1); // Window Horizontal RAM Address End (R51h)
+ ili9325Command(ILI9325_COMMANDS_VERTICALADDRESSSTARTPOSITION, 0X0000); // Window Vertical RAM Address Start (R52h)
+ ili9325Command(ILI9325_COMMANDS_VERTICALADDRESSENDPOSITION, ili9325Properties.height - 1); // Window Vertical RAM Address End (R53h)
+ ili9325Command(ILI9325_COMMANDS_DRIVEROUTPUTCONTROL2, 0xa700); // Driver Output Control (R60h)
+ ili9325Command(ILI9325_COMMANDS_BASEIMAGEDISPLAYCONTROL, 0x0003); // Driver Output Control (R61h) - enable VLE
+ ili9325Command(ILI9325_COMMANDS_PANELINTERFACECONTROL1, 0X0010); // Panel Interface Control 1 (R90h)
+
+ // Display On
+ ili9325Command(ILI9325_COMMANDS_DISPLAYCONTROL1, 0x0133); // Display Control (R07h)
+ ili9325Delay(500);
+ ili9325WriteCmd(ILI9325_COMMANDS_WRITEDATATOGRAM);
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the cursor to the home position (0,0)
+*/
+/**************************************************************************/
+void ili9325Home(void)
+{
+ ili9325SetCursor(0, 0);
+ ili9325WriteCmd(ILI9325_COMMANDS_WRITEDATATOGRAM); // Write Data to GRAM (R22h)
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the window confines
+*/
+/**************************************************************************/
+void ili9325SetWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1)
+{
+ ili9325Command(ILI9325_COMMANDS_HORIZONTALADDRESSSTARTPOSITION, x0);
+ ili9325Command(ILI9325_COMMANDS_HORIZONTALADDRESSENDPOSITION, x1);
+ ili9325Command(ILI9325_COMMANDS_VERTICALADDRESSSTARTPOSITION, y0);
+ ili9325Command(ILI9325_COMMANDS_VERTICALADDRESSENDPOSITION, y1);
+ ili9325SetCursor(x0, y0);
+}
+
+/*************************************************/
+/* Public Methods */
+/*************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Configures any pins or HW and initialises the LCD controller
+*/
+/**************************************************************************/
+void lcdInit(void)
+{
+ // Set control line pins to output
+ gpioSetDir(ILI9325_CS_PORT, ILI9325_CS_PIN, 1);
+ gpioSetDir(ILI9325_CD_PORT, ILI9325_CD_PIN, 1);
+ gpioSetDir(ILI9325_WR_PORT, ILI9325_WR_PIN, 1);
+ gpioSetDir(ILI9325_RD_PORT, ILI9325_RD_PIN, 1);
+
+ // Set data port pins to output
+ ILI9325_GPIO2DATA_SETOUTPUT;
+
+ // Disable pullups
+ ILI9325_DISABLEPULLUPS();
+
+ // Set backlight pin to output and turn it on
+ gpioSetDir(ILI9325_BL_PORT, ILI9325_BL_PIN, 1); // set to output
+ lcdBacklight(TRUE);
+
+ // Set reset pin to output
+ gpioSetDir(ILI9325_RES_PORT, ILI9325_RES_PIN, 1); // Set to output
+ gpioSetValue(ILI9325_RES_PORT, ILI9325_RES_PIN, 0); // Low to reset
+ systickDelay(50);
+ gpioSetValue(ILI9325_RES_PORT, ILI9325_RES_PIN, 1); // High to exit
+
+ // Initialize the display
+ ili9325InitDisplay();
+
+ systickDelay(50);
+
+ // Set lcd to default orientation
+ lcdSetOrientation(lcdOrientation);
+
+ // Fill black
+ lcdFillRGB(COLOR_BLACK);
+
+ // Initialise the touch screen (and calibrate if necessary)
+ tsInit();
+}
+
+/**************************************************************************/
+/*!
+ @brief Enables or disables the LCD backlight
+*/
+/**************************************************************************/
+void lcdBacklight(bool state)
+{
+ // Set the backlight
+ gpioSetValue(ILI9325_BL_PORT, ILI9325_BL_PIN, state ? 0 : 1);
+}
+
+/**************************************************************************/
+/*!
+ @brief Renders a simple test pattern on the LCD
+*/
+/**************************************************************************/
+void lcdTest(void)
+{
+ uint32_t i,j;
+ ili9325Home();
+
+ for(i=0;i<320;i++)
+ {
+ for(j=0;j<240;j++)
+ {
+ if(i>279)ili9325WriteData(COLOR_WHITE);
+ else if(i>239)ili9325WriteData(COLOR_BLUE);
+ else if(i>199)ili9325WriteData(COLOR_GREEN);
+ else if(i>159)ili9325WriteData(COLOR_CYAN);
+ else if(i>119)ili9325WriteData(COLOR_RED);
+ else if(i>79)ili9325WriteData(COLOR_MAGENTA);
+ else if(i>39)ili9325WriteData(COLOR_YELLOW);
+ else ili9325WriteData(COLOR_BLACK);
+ }
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Fills the LCD with the specified 16-bit color
+*/
+/**************************************************************************/
+void lcdFillRGB(uint16_t data)
+{
+ unsigned int i;
+ ili9325Home();
+
+ uint32_t pixels = 320*240;
+ for ( i=0; i < pixels; i++ )
+ {
+ ili9325WriteData(data);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a single pixel at the specified X/Y location
+*/
+/**************************************************************************/
+void lcdDrawPixel(uint16_t x, uint16_t y, uint16_t color)
+{
+ ili9325SetCursor(x, y);
+ ili9325WriteCmd(ILI9325_COMMANDS_WRITEDATATOGRAM); // Write Data to GRAM (R22h)
+ ili9325WriteData(color);
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws an array of consecutive RGB565 pixels (much
+ faster than addressing each pixel individually)
+*/
+/**************************************************************************/
+void lcdDrawPixels(uint16_t x, uint16_t y, uint16_t *data, uint32_t len)
+{
+ uint32_t i = 0;
+ ili9325SetCursor(x, y);
+ ili9325WriteCmd(ILI9325_COMMANDS_WRITEDATATOGRAM);
+ do
+ {
+ ili9325WriteData(data[i]);
+ i++;
+ } while (i<len);
+}
+
+/**************************************************************************/
+/*!
+ @brief Optimised routine to draw a horizontal line faster than
+ setting individual pixels
+*/
+/**************************************************************************/
+void lcdDrawHLine(uint16_t x0, uint16_t x1, uint16_t y, uint16_t color)
+{
+ // Allows for slightly better performance than setting individual pixels
+ uint16_t x, pixels;
+
+ if (x1 < x0)
+ {
+ // Switch x1 and x0
+ x = x1;
+ x1 = x0;
+ x0 = x;
+ }
+
+ // Check limits
+ if (x1 >= lcdGetWidth())
+ {
+ x1 = lcdGetWidth() - 1;
+ }
+ if (x0 >= lcdGetWidth())
+ {
+ x0 = lcdGetWidth() - 1;
+ }
+
+ ili9325SetCursor(x0, y);
+ ili9325WriteCmd(ILI9325_COMMANDS_WRITEDATATOGRAM); // Write Data to GRAM (R22h)
+ for (pixels = 0; pixels < x1 - x0 + 1; pixels++)
+ {
+ ili9325WriteData(color);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Optimised routine to draw a vertical line faster than
+ setting individual pixels
+*/
+/**************************************************************************/
+void lcdDrawVLine(uint16_t x, uint16_t y0, uint16_t y1, uint16_t color)
+{
+ // Allows for slightly better performance than setting individual pixels
+ lcdOrientation_t orientation = lcdOrientation;
+
+ // Switch orientation
+ lcdSetOrientation(orientation == LCD_ORIENTATION_PORTRAIT ? LCD_ORIENTATION_LANDSCAPE : LCD_ORIENTATION_PORTRAIT);
+
+ // Draw horizontal line like usual
+ lcdDrawHLine(y0, y1, lcdGetHeight() - (x + 1), color);
+
+ // Switch orientation back
+ lcdSetOrientation(orientation);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the 16-bit color of the pixel at the specified location
+*/
+/**************************************************************************/
+uint16_t lcdGetPixel(uint16_t x, uint16_t y)
+{
+ uint16_t preFetch = 0;
+
+ ili9325SetCursor(x, y);
+ ili9325WriteCmd(ILI9325_COMMANDS_WRITEDATATOGRAM);
+ preFetch = ili9325ReadData();
+
+ // Eeek ... why does this need to be done twice for a proper value?!?
+ ili9325SetCursor(x, y);
+ ili9325WriteCmd(ILI9325_COMMANDS_WRITEDATATOGRAM);
+ return ili9325ReadData();
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the LCD orientation to horizontal and vertical
+*/
+/**************************************************************************/
+void lcdSetOrientation(lcdOrientation_t orientation)
+{
+ uint16_t entryMode = 0x1030;
+ uint16_t outputControl = 0x0100;
+
+ switch (orientation)
+ {
+ case LCD_ORIENTATION_PORTRAIT:
+ entryMode = 0x1030;
+ outputControl = 0x0100;
+ break;
+ case LCD_ORIENTATION_LANDSCAPE:
+ entryMode = 0x1028;
+ outputControl = 0x0000;
+ break;
+ }
+
+ ili9325Command(ILI9325_COMMANDS_ENTRYMODE, entryMode);
+ ili9325Command(ILI9325_COMMANDS_DRIVEROUTPUTCONTROL1, outputControl);
+ lcdOrientation = orientation;
+
+ ili9325SetCursor(0, 0);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the current screen orientation (horizontal or vertical)
+*/
+/**************************************************************************/
+lcdOrientation_t lcdGetOrientation(void)
+{
+ return lcdOrientation;
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the width in pixels of the LCD screen (varies depending
+ on the current screen orientation)
+*/
+/**************************************************************************/
+uint16_t lcdGetWidth(void)
+{
+ switch (lcdOrientation)
+ {
+ case LCD_ORIENTATION_PORTRAIT:
+ return ili9325Properties.width;
+ break;
+ case LCD_ORIENTATION_LANDSCAPE:
+ default:
+ return ili9325Properties.height;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the height in pixels of the LCD screen (varies depending
+ on the current screen orientation)
+*/
+/**************************************************************************/
+uint16_t lcdGetHeight(void)
+{
+ switch (lcdOrientation)
+ {
+ case LCD_ORIENTATION_PORTRAIT:
+ return ili9325Properties.height;
+ break;
+ case LCD_ORIENTATION_LANDSCAPE:
+ default:
+ return ili9325Properties.width;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Scrolls the contents of the LCD screen vertically the
+ specified number of pixels using a HW optimised routine
+*/
+/**************************************************************************/
+void lcdScroll(int16_t pixels, uint16_t fillColor)
+{
+ int16_t y = pixels;
+ while (y < 0)
+ y += 320;
+ while (y >= 320)
+ y -= 320;
+ ili9325WriteCmd(ILI9325_COMMANDS_VERTICALSCROLLCONTROL);
+ ili9325WriteData(y);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the controller's 16-bit (4 hexdigit) ID
+*/
+/**************************************************************************/
+uint16_t lcdGetControllerID(void)
+{
+ return ili9325Type();
+}
+
+/**************************************************************************/
+/*!
+ @brief Returns the LCDs 'lcdProperties_t' that describes the LCDs
+ generic capabilities and dimensions
+*/
+/**************************************************************************/
+lcdProperties_t lcdGetProperties(void)
+{
+ return ili9325Properties;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ILI9325.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __ILI9325_H__
+#define __ILI9325_H__
+
+#include "projectconfig.h"
+
+#include "drivers/lcd/tft/lcd.h"
+#include "core/gpio/gpio.h"
+
+// Control pins
+#define ILI9325_CS_PORT 1 // CS (LCD Pin 7)
+#define ILI9325_CS_PIN 8
+#define ILI9325_CD_PORT 1 // CS/RS (LCD Pin 8)
+#define ILI9325_CD_PIN 9
+#define ILI9325_WR_PORT 1 // WR (LCD Pin 9)
+#define ILI9325_WR_PIN 10
+#define ILI9325_RD_PORT 1 // RD (LCD Pin 10)
+#define ILI9325_RD_PIN 11
+
+// These combined pin definitions are for optimisation purposes.
+// If the pin values above are modified the bit equivalents
+// below will also need to be updated
+#define ILI9325_CS_CD_PINS 0x300 // 8 + 9
+#define ILI9325_RD_WR_PINS 0xC00 // 11 + 10
+#define ILI9325_WR_CS_PINS 0x500 // 10 + 8
+#define ILI9325_CD_RD_WR_PINS 0xE00 // 9 + 11 + 10
+#define ILI9325_CS_CD_RD_WR_PINS 0xF00 // 8 + 9 + 11 + 10
+
+// Backlight and Reset pins
+#define ILI9325_RES_PORT 3 // LCD Reset (LCD Pin 31)
+#define ILI9325_RES_PIN 3
+#define ILI9325_BL_PORT 2 // Backlight Enable (LCD Pin 16)
+#define ILI9325_BL_PIN 9
+
+// Data pins
+// Note: data pins must be consecutive and on the same port
+#define ILI9325_DATA_PORT 2 // 8-Pin Data Port
+#define ILI9325_DATA_PIN1 1
+#define ILI9325_DATA_PIN2 2
+#define ILI9325_DATA_PIN3 3
+#define ILI9325_DATA_PIN4 4
+#define ILI9325_DATA_PIN5 5
+#define ILI9325_DATA_PIN6 6
+#define ILI9325_DATA_PIN7 7
+#define ILI9325_DATA_PIN8 8
+#define ILI9325_DATA_MASK 0x000001FE
+#define ILI9325_DATA_OFFSET 1 // Offset = PIN1
+
+// Placed here to try to keep all pin specific values in header file
+#define ILI9325_DISABLEPULLUPS() do { gpioSetPullup(&IOCON_PIO2_1, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_2, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_3, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_4, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_5, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_6, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_7, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_8, gpioPullupMode_Inactive); } while (0)
+
+// These registers allow fast single operation clear+set of bits (see section 8.5.1 of LPC1343 UM)
+#define ILI9325_GPIO2DATA_DATA (*(pREG32 (GPIO_GPIO2_BASE + (ILI9325_DATA_MASK << 2))))
+#define ILI9325_GPIO1DATA_WR (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ILI9325_WR_PIN) << 2))))
+#define ILI9325_GPIO1DATA_CD (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ILI9325_CD_PIN) << 2))))
+#define ILI9325_GPIO1DATA_CS (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ILI9325_CS_PIN) << 2))))
+#define ILI9325_GPIO1DATA_RD (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ILI9325_RD_PIN) << 2))))
+#define ILI9325_GPIO3DATA_RES (*(pREG32 (GPIO_GPIO3_BASE + ((1 << ILI9325_RES_PIN) << 2))))
+#define ILI9325_GPIO1DATA_CS_CD (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9325_CS_CD_PINS) << 2))))
+#define ILI9325_GPIO1DATA_RD_WR (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9325_RD_WR_PINS) << 2))))
+#define ILI9325_GPIO1DATA_WR_CS (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9325_WR_CS_PINS) << 2))))
+#define ILI9325_GPIO1DATA_CD_RD_WR (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9325_CD_RD_WR_PINS) << 2))))
+#define ILI9325_GPIO1DATA_CS_CD_RD_WR (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9325_CS_CD_RD_WR_PINS) << 2))))
+
+// Macros to set data bus direction to input/output
+#define ILI9325_GPIO2DATA_SETINPUT GPIO_GPIO2DIR &= ~ILI9325_DATA_MASK
+#define ILI9325_GPIO2DATA_SETOUTPUT GPIO_GPIO2DIR |= ILI9325_DATA_MASK
+
+// Macros for control line state
+#define CLR_CD ILI9325_GPIO1DATA_CD = (0)
+#define SET_CD ILI9325_GPIO1DATA_CD = (1 << ILI9325_CD_PIN)
+#define CLR_CS ILI9325_GPIO1DATA_CS = (0)
+#define SET_CS ILI9325_GPIO1DATA_CS = (1 << ILI9325_CS_PIN)
+#define CLR_WR ILI9325_GPIO1DATA_WR = (0)
+#define SET_WR ILI9325_GPIO1DATA_WR = (1 << ILI9325_WR_PIN)
+#define CLR_RD ILI9325_GPIO1DATA_RD = (0)
+#define SET_RD ILI9325_GPIO1DATA_RD = (1 << ILI9325_RD_PIN)
+#define CLR_RESET ILI9325_GPIO3DATA_RES = (0)
+#define SET_RESET ILI9325_GPIO3DATA_RES = (1 << ILI9325_RES_PIN)
+
+// These 'combined' macros are defined to improve code performance by
+// reducing the number of instructions in heavily used functions
+#define CLR_CS_CD ILI9325_GPIO1DATA_CS_CD = (0);
+#define SET_RD_WR ILI9325_GPIO1DATA_RD_WR = (ILI9325_RD_WR_PINS);
+#define SET_WR_CS ILI9325_GPIO1DATA_WR_CS = (ILI9325_WR_CS_PINS);
+#define SET_CD_RD_WR ILI9325_GPIO1DATA_CD_RD_WR = (ILI9325_CD_RD_WR_PINS);
+#define CLR_CS_CD_SET_RD_WR ILI9325_GPIO1DATA_CS_CD_RD_WR = (ILI9325_RD_WR_PINS);
+#define CLR_CS_SET_CD_RD_WR ILI9325_GPIO1DATA_CS_CD_RD_WR = (ILI9325_CD_RD_WR_PINS);
+
+enum
+{
+ ILI9325_COMMANDS_DRIVERCODEREAD = 0x0000,
+ ILI9325_COMMANDS_DRIVEROUTPUTCONTROL1 = 0x0001,
+ ILI9325_COMMANDS_LCDDRIVINGCONTROL = 0x0002,
+ ILI9325_COMMANDS_ENTRYMODE = 0x0003,
+ ILI9325_COMMANDS_RESIZECONTROL = 0x0004,
+ ILI9325_COMMANDS_DISPLAYCONTROL1 = 0x0007,
+ ILI9325_COMMANDS_DISPLAYCONTROL2 = 0x0008,
+ ILI9325_COMMANDS_DISPLAYCONTROL3 = 0x0009,
+ ILI9325_COMMANDS_DISPLAYCONTROL4 = 0x000A,
+ ILI9325_COMMANDS_RGBDISPLAYINTERFACECONTROL1 = 0x000C,
+ ILI9325_COMMANDS_FRAMEMAKERPOSITION = 0x000D,
+ ILI9325_COMMANDS_RGBDISPLAYINTERFACECONTROL2 = 0x000F,
+ ILI9325_COMMANDS_POWERCONTROL1 = 0x0010,
+ ILI9325_COMMANDS_POWERCONTROL2 = 0x0011,
+ ILI9325_COMMANDS_POWERCONTROL3 = 0x0012,
+ ILI9325_COMMANDS_POWERCONTROL4 = 0x0013,
+ ILI9325_COMMANDS_HORIZONTALGRAMADDRESSSET = 0x0020,
+ ILI9325_COMMANDS_VERTICALGRAMADDRESSSET = 0x0021,
+ ILI9325_COMMANDS_WRITEDATATOGRAM = 0x0022,
+ ILI9325_COMMANDS_POWERCONTROL7 = 0x0029,
+ ILI9325_COMMANDS_FRAMERATEANDCOLORCONTROL = 0x002B,
+ ILI9325_COMMANDS_GAMMACONTROL1 = 0x0030,
+ ILI9325_COMMANDS_GAMMACONTROL2 = 0x0031,
+ ILI9325_COMMANDS_GAMMACONTROL3 = 0x0032,
+ ILI9325_COMMANDS_GAMMACONTROL4 = 0x0035,
+ ILI9325_COMMANDS_GAMMACONTROL5 = 0x0036,
+ ILI9325_COMMANDS_GAMMACONTROL6 = 0x0037,
+ ILI9325_COMMANDS_GAMMACONTROL7 = 0x0038,
+ ILI9325_COMMANDS_GAMMACONTROL8 = 0x0039,
+ ILI9325_COMMANDS_GAMMACONTROL9 = 0x003C,
+ ILI9325_COMMANDS_GAMMACONTROL10 = 0x003D,
+ ILI9325_COMMANDS_HORIZONTALADDRESSSTARTPOSITION = 0x0050,
+ ILI9325_COMMANDS_HORIZONTALADDRESSENDPOSITION = 0x0051,
+ ILI9325_COMMANDS_VERTICALADDRESSSTARTPOSITION = 0x0052,
+ ILI9325_COMMANDS_VERTICALADDRESSENDPOSITION = 0x0053,
+ ILI9325_COMMANDS_DRIVEROUTPUTCONTROL2 = 0x0060,
+ ILI9325_COMMANDS_BASEIMAGEDISPLAYCONTROL = 0x0061,
+ ILI9325_COMMANDS_VERTICALSCROLLCONTROL = 0x006A,
+ ILI9325_COMMANDS_PARTIALIMAGE1DISPLAYPOSITION = 0x0080,
+ ILI9325_COMMANDS_PARTIALIMAGE1AREASTARTLINE = 0x0081,
+ ILI9325_COMMANDS_PARTIALIMAGE1AREAENDLINE = 0x0082,
+ ILI9325_COMMANDS_PARTIALIMAGE2DISPLAYPOSITION = 0x0083,
+ ILI9325_COMMANDS_PARTIALIMAGE2AREASTARTLINE = 0x0084,
+ ILI9325_COMMANDS_PARTIALIMAGE2AREAENDLINE = 0x0085,
+ ILI9325_COMMANDS_PANELINTERFACECONTROL1 = 0x0090,
+ ILI9325_COMMANDS_PANELINTERFACECONTROL2 = 0x0092,
+ ILI9325_COMMANDS_PANELINTERFACECONTROL4 = 0x0095,
+ ILI9325_COMMANDS_OTPVCMPROGRAMMINGCONTROL = 0x00A1,
+ ILI9325_COMMANDS_OTPVCMSTATUSANDENABLE = 0x00A2,
+ ILI9325_COMMANDS_OTPPROGRAMMINGIDKEY = 0x00A5
+};
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ILI9328.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section DESCRIPTION
+
+ Driver for ILI9328 240x320 pixel TFT LCD displays.
+
+ This driver uses an 8-bit interface and a 16-bit RGB565 colour palette.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "ILI9328.h"
+#include "core/systick/systick.h"
+#include "drivers/lcd/tft/touchscreen.h"
+
+static volatile lcdOrientation_t lcdOrientation = LCD_ORIENTATION_PORTRAIT;
+static lcdProperties_t ili9328Properties = { 240, 320, TRUE, TRUE, TRUE };
+
+/*************************************************/
+/* Private Methods */
+/*************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Causes a brief delay (10 ticks per unit)
+*/
+/**************************************************************************/
+void ili9328Delay(unsigned int t)
+{
+ unsigned char t1;
+ while(t--)
+ for ( t1=10; t1 > 0; t1-- )
+ {
+ __asm("nop");
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes the supplied 16-bit command using an 8-bit interface
+*/
+/**************************************************************************/
+void ili9328WriteCmd(uint16_t command)
+{
+ // Compiled with -Os on GCC 4.4 this works out to 25 cycles
+ // (versus 36 compiled with no optimisations). I'm not sure it
+ // can be improved further, so that means 25 cycles/350nS for
+ // continuous writes (cmd, data, data, data, ...) or ~150 cycles/
+ // ~2.1uS for a random pixel (Set X [cmd+data], Set Y [cmd+data],
+ // Set color [cmd+data]) (times assumes 72MHz clock).
+
+ CLR_CS_CD_SET_RD_WR; // Saves 18 commands compared to "CLR_CS; CLR_CD; SET_RD; SET_WR;"
+ ILI9328_GPIO2DATA_DATA = (command >> (8 - ILI9328_DATA_OFFSET));
+ CLR_WR;
+ SET_WR;
+ ILI9328_GPIO2DATA_DATA = command << ILI9328_DATA_OFFSET;
+ CLR_WR;
+ SET_WR_CS; // Saves 7 commands compared to "SET_WR; SET_CS;"
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes the supplied 16-bit data using an 8-bit interface
+*/
+/**************************************************************************/
+void ili9328WriteData(uint16_t data)
+{
+ CLR_CS_SET_CD_RD_WR; // Saves 18 commands compared to SET_CD; SET_RD; SET_WR; CLR_CS"
+ ILI9328_GPIO2DATA_DATA = (data >> (8 - ILI9328_DATA_OFFSET));
+ CLR_WR;
+ SET_WR;
+ ILI9328_GPIO2DATA_DATA = data << ILI9328_DATA_OFFSET;
+ CLR_WR;
+ SET_WR_CS; // Saves 7 commands compared to "SET_WR, SET_CS;"
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a 16-bit value from the 8-bit data bus
+*/
+/**************************************************************************/
+uint16_t ili9328ReadData(void)
+{
+ // ToDo: Optimise this method!
+
+ uint16_t high, low;
+ high = low = 0;
+ uint16_t d;
+
+ SET_CD_RD_WR; // Saves 14 commands compared to "SET_CD; SET_RD; SET_WR"
+ CLR_CS;
+
+ // set inputs
+ ILI9328_GPIO2DATA_SETINPUT;
+ CLR_RD;
+ ili9328Delay(100);
+ high = ILI9328_GPIO2DATA_DATA;
+ high >>= ILI9328_DATA_OFFSET;
+ high &= 0xFF;
+ SET_RD;
+
+ CLR_RD;
+ ili9328Delay(100);
+ low = ILI9328_GPIO2DATA_DATA;
+ low >>= ILI9328_DATA_OFFSET;
+ low &=0xFF;
+ SET_RD;
+
+ SET_CS;
+ ILI9328_GPIO2DATA_SETOUTPUT;
+
+ d = high;
+ d <<= 8;
+ d |= low;
+
+ return d;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a 16-bit value
+*/
+/**************************************************************************/
+uint16_t ili9328Read(uint16_t addr)
+{
+ ili9328WriteCmd(addr);
+ return ili9328ReadData();
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends a 16-bit command + 16-bit data
+*/
+/**************************************************************************/
+void ili9328Command(uint16_t command, uint16_t data)
+{
+ ili9328WriteCmd(command);
+ ili9328WriteData(data);
+}
+
+/**************************************************************************/
+/*!
+ @brief Returns the 16-bit (4-hexdigit) controller code
+*/
+/**************************************************************************/
+uint16_t ili9328Type(void)
+{
+ ili9328WriteCmd(ILI9328_COMMANDS_DRIVERCODEREAD);
+ return ili9328ReadData();
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the cursor to the specified X/Y position
+*/
+/**************************************************************************/
+void ili9328SetCursor(uint16_t x, uint16_t y)
+{
+ uint16_t al, ah;
+
+ if (lcdOrientation == LCD_ORIENTATION_LANDSCAPE)
+ {
+ al = y;
+ ah = x;
+ }
+ else
+ {
+ al = x;
+ ah = y;
+ }
+
+ ili9328Command(ILI9328_COMMANDS_HORIZONTALGRAMADDRESSSET, al);
+ ili9328Command(ILI9328_COMMANDS_VERTICALGRAMADDRESSSET, ah);
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends the initialisation sequence to the display controller
+*/
+/**************************************************************************/
+void ili9328InitDisplay(void)
+{
+ // Clear data line
+ GPIO_GPIO2DATA &= ~ILI9328_DATA_MASK;
+
+ SET_RD;
+ SET_WR;
+ SET_CS;
+ SET_CD;
+
+ // Reset display
+ CLR_RESET;
+ ili9328Delay(100);
+ SET_RESET;
+ ili9328Delay(1000);
+
+ ili9328Command(ILI9328_COMMANDS_DRIVEROUTPUTCONTROL1, 0x0100); // Driver Output Control Register (R01h)
+ ili9328Command(ILI9328_COMMANDS_LCDDRIVINGCONTROL, 0x0700); // LCD Driving Waveform Control (R02h)
+ ili9328Command(ILI9328_COMMANDS_ENTRYMODE, 0x1030); // Entry Mode (R03h)
+ ili9328Command(ILI9328_COMMANDS_DISPLAYCONTROL2, 0x0302);
+ ili9328Command(ILI9328_COMMANDS_DISPLAYCONTROL3, 0x0000);
+ ili9328Command(ILI9328_COMMANDS_DISPLAYCONTROL4, 0x0000); // Fmark On
+ ili9328Command(ILI9328_COMMANDS_POWERCONTROL1, 0x0000); // Power Control 1 (R10h)
+ ili9328Command(ILI9328_COMMANDS_POWERCONTROL2, 0x0007); // Power Control 2 (R11h)
+ ili9328Command(ILI9328_COMMANDS_POWERCONTROL3, 0x0000); // Power Control 3 (R12h)
+ ili9328Command(ILI9328_COMMANDS_POWERCONTROL4, 0x0000); // Power Control 4 (R13h)
+ ili9328Delay(1000);
+ ili9328Command(ILI9328_COMMANDS_POWERCONTROL1, 0x14B0); // Power Control 1 (R10h)
+ ili9328Delay(500);
+ ili9328Command(ILI9328_COMMANDS_POWERCONTROL2, 0x0007); // Power Control 2 (R11h)
+ ili9328Delay(500);
+ ili9328Command(ILI9328_COMMANDS_POWERCONTROL3, 0x008E); // Power Control 3 (R12h)
+ ili9328Command(ILI9328_COMMANDS_POWERCONTROL4, 0x0C00); // Power Control 4 (R13h)
+ ili9328Command(ILI9328_COMMANDS_POWERCONTROL7, 0x0015); // NVM read data 2 (R29h)
+ ili9328Delay(500);
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL1, 0x0000); // Gamma Control 1
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL2, 0x0107); // Gamma Control 2
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL3, 0x0000); // Gamma Control 3
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL4, 0x0203); // Gamma Control 4
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL5, 0x0402); // Gamma Control 5
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL6, 0x0000); // Gamma Control 6
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL7, 0x0207); // Gamma Control 7
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL8, 0x0000); // Gamma Control 8
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL9, 0x0203); // Gamma Control 9
+ ili9328Command(ILI9328_COMMANDS_GAMMACONTROL10, 0x0403); // Gamma Control 10
+ ili9328Command(ILI9328_COMMANDS_HORIZONTALADDRESSSTARTPOSITION, 0x0000); // Window Horizontal RAM Address Start (R50h)
+ ili9328Command(ILI9328_COMMANDS_HORIZONTALADDRESSENDPOSITION, ili9328Properties.width - 1); // Window Horizontal RAM Address End (R51h)
+ ili9328Command(ILI9328_COMMANDS_VERTICALADDRESSSTARTPOSITION, 0X0000); // Window Vertical RAM Address Start (R52h)
+ ili9328Command(ILI9328_COMMANDS_VERTICALADDRESSENDPOSITION, ili9328Properties.height - 1); // Window Vertical RAM Address End (R53h)
+ ili9328Command(ILI9328_COMMANDS_DRIVEROUTPUTCONTROL2, 0xa700); // Driver Output Control (R60h)
+ ili9328Command(ILI9328_COMMANDS_BASEIMAGEDISPLAYCONTROL, 0x0003); // Driver Output Control (R61h) - enable VLE
+ ili9328Command(ILI9328_COMMANDS_PANELINTERFACECONTROL1, 0X0010); // Panel Interface Control 1 (R90h)
+
+ // Display On
+ ili9328Command(ILI9328_COMMANDS_DISPLAYCONTROL1, 0x0133); // Display Control (R07h)
+ ili9328Delay(500);
+ ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the cursor to the home position (0,0)
+*/
+/**************************************************************************/
+void ili9328Home(void)
+{
+ ili9328SetCursor(0, 0);
+ ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM); // Write Data to GRAM (R22h)
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the window confines
+*/
+/**************************************************************************/
+void ili9328SetWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1)
+{
+ ili9328Command(ILI9328_COMMANDS_HORIZONTALADDRESSSTARTPOSITION, x0);
+ ili9328Command(ILI9328_COMMANDS_HORIZONTALADDRESSENDPOSITION, x1);
+ ili9328Command(ILI9328_COMMANDS_VERTICALADDRESSSTARTPOSITION, y0);
+ ili9328Command(ILI9328_COMMANDS_VERTICALADDRESSENDPOSITION, y1);
+ ili9328SetCursor(x0, y0);
+}
+
+/*************************************************/
+/* Public Methods */
+/*************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Configures any pins or HW and initialises the LCD controller
+*/
+/**************************************************************************/
+void lcdInit(void)
+{
+ // Set control line pins to output
+ gpioSetDir(ILI9328_CS_PORT, ILI9328_CS_PIN, 1);
+ gpioSetDir(ILI9328_CD_PORT, ILI9328_CD_PIN, 1);
+ gpioSetDir(ILI9328_WR_PORT, ILI9328_WR_PIN, 1);
+ gpioSetDir(ILI9328_RD_PORT, ILI9328_RD_PIN, 1);
+
+ // Set data port pins to output
+ ILI9328_GPIO2DATA_SETOUTPUT;
+
+ // Disable pullups
+ ILI9328_DISABLEPULLUPS();
+
+ // Set backlight pin to output and turn it on
+ gpioSetDir(ILI9328_BL_PORT, ILI9328_BL_PIN, 1); // set to output
+ lcdBacklight(TRUE);
+
+ // Set reset pin to output
+ gpioSetDir(ILI9328_RES_PORT, ILI9328_RES_PIN, 1); // Set to output
+ gpioSetValue(ILI9328_RES_PORT, ILI9328_RES_PIN, 0); // Low to reset
+ systickDelay(50);
+ gpioSetValue(ILI9328_RES_PORT, ILI9328_RES_PIN, 1); // High to exit
+
+ // Initialize the display
+ ili9328InitDisplay();
+
+ systickDelay(50);
+
+ // Set lcd to default orientation
+ lcdSetOrientation(lcdOrientation);
+
+ // Fill black
+ lcdFillRGB(COLOR_BLACK);
+
+ // Initialise the touch screen (and calibrate if necessary)
+ tsInit();
+}
+
+/**************************************************************************/
+/*!
+ @brief Enables or disables the LCD backlight
+*/
+/**************************************************************************/
+void lcdBacklight(bool state)
+{
+ // Set the backlight
+ gpioSetValue(ILI9328_BL_PORT, ILI9328_BL_PIN, state ? 0 : 1);
+}
+
+/**************************************************************************/
+/*!
+ @brief Renders a simple test pattern on the LCD
+*/
+/**************************************************************************/
+void lcdTest(void)
+{
+ uint32_t i,j;
+ ili9328Home();
+
+ for(i=0;i<320;i++)
+ {
+ for(j=0;j<240;j++)
+ {
+ if(i>279)ili9328WriteData(COLOR_WHITE);
+ else if(i>239)ili9328WriteData(COLOR_BLUE);
+ else if(i>199)ili9328WriteData(COLOR_GREEN);
+ else if(i>159)ili9328WriteData(COLOR_CYAN);
+ else if(i>119)ili9328WriteData(COLOR_RED);
+ else if(i>79)ili9328WriteData(COLOR_MAGENTA);
+ else if(i>39)ili9328WriteData(COLOR_YELLOW);
+ else ili9328WriteData(COLOR_BLACK);
+ }
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Fills the LCD with the specified 16-bit color
+*/
+/**************************************************************************/
+void lcdFillRGB(uint16_t data)
+{
+ unsigned int i;
+ ili9328Home();
+
+ uint32_t pixels = 320*240;
+ for ( i=0; i < pixels; i++ )
+ {
+ ili9328WriteData(data);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a single pixel at the specified X/Y location
+*/
+/**************************************************************************/
+void lcdDrawPixel(uint16_t x, uint16_t y, uint16_t color)
+{
+ ili9328SetCursor(x, y);
+ ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM); // Write Data to GRAM (R22h)
+ ili9328WriteData(color);
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws an array of consecutive RGB565 pixels (much
+ faster than addressing each pixel individually)
+*/
+/**************************************************************************/
+void lcdDrawPixels(uint16_t x, uint16_t y, uint16_t *data, uint32_t len)
+{
+ uint32_t i = 0;
+ ili9328SetCursor(x, y);
+ ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);
+ do
+ {
+ ili9328WriteData(data[i]);
+ i++;
+ } while (i<len);
+}
+
+/**************************************************************************/
+/*!
+ @brief Optimised routine to draw a horizontal line faster than
+ setting individual pixels
+*/
+/**************************************************************************/
+void lcdDrawHLine(uint16_t x0, uint16_t x1, uint16_t y, uint16_t color)
+{
+ // Allows for slightly better performance than setting individual pixels
+ uint16_t x, pixels;
+
+ if (x1 < x0)
+ {
+ // Switch x1 and x0
+ x = x1;
+ x1 = x0;
+ x0 = x;
+ }
+
+ // Check limits
+ if (x1 >= lcdGetWidth())
+ {
+ x1 = lcdGetWidth() - 1;
+ }
+ if (x0 >= lcdGetWidth())
+ {
+ x0 = lcdGetWidth() - 1;
+ }
+
+ ili9328SetCursor(x0, y);
+ ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM); // Write Data to GRAM (R22h)
+ for (pixels = 0; pixels < x1 - x0 + 1; pixels++)
+ {
+ ili9328WriteData(color);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Optimised routine to draw a vertical line faster than
+ setting individual pixels
+*/
+/**************************************************************************/
+void lcdDrawVLine(uint16_t x, uint16_t y0, uint16_t y1, uint16_t color)
+{
+ lcdOrientation_t orientation = lcdOrientation;
+
+ // Switch orientation
+ lcdSetOrientation(orientation == LCD_ORIENTATION_PORTRAIT ? LCD_ORIENTATION_LANDSCAPE : LCD_ORIENTATION_PORTRAIT);
+
+ // Draw horizontal line like usual
+ lcdDrawHLine(y0, y1, lcdGetHeight() - (x + 1), color);
+
+ // Switch orientation back
+ lcdSetOrientation(orientation);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the 16-bit color of the pixel at the specified location
+*/
+/**************************************************************************/
+uint16_t lcdGetPixel(uint16_t x, uint16_t y)
+{
+ uint16_t preFetch = 0;
+
+ ili9328SetCursor(x, y);
+ ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);
+ preFetch = ili9328ReadData();
+
+ // Eeek ... why does this need to be done twice for a proper value?!?
+ ili9328SetCursor(x, y);
+ ili9328WriteCmd(ILI9328_COMMANDS_WRITEDATATOGRAM);
+ return ili9328ReadData();
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the LCD orientation to horizontal and vertical
+*/
+/**************************************************************************/
+void lcdSetOrientation(lcdOrientation_t orientation)
+{
+ uint16_t entryMode = 0x1030;
+ uint16_t outputControl = 0x0100;
+
+ switch (orientation)
+ {
+ case LCD_ORIENTATION_PORTRAIT:
+ entryMode = 0x1030;
+ outputControl = 0x0100;
+ break;
+ case LCD_ORIENTATION_LANDSCAPE:
+ entryMode = 0x1028;
+ outputControl = 0x0000;
+ break;
+ }
+
+ ili9328Command(ILI9328_COMMANDS_ENTRYMODE, entryMode);
+ ili9328Command(ILI9328_COMMANDS_DRIVEROUTPUTCONTROL1, outputControl);
+ lcdOrientation = orientation;
+
+ ili9328SetCursor(0, 0);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the current screen orientation (horizontal or vertical)
+*/
+/**************************************************************************/
+lcdOrientation_t lcdGetOrientation(void)
+{
+ return lcdOrientation;
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the width in pixels of the LCD screen (varies depending
+ on the current screen orientation)
+*/
+/**************************************************************************/
+uint16_t lcdGetWidth(void)
+{
+ switch (lcdOrientation)
+ {
+ case LCD_ORIENTATION_PORTRAIT:
+ return ili9328Properties.width;
+ break;
+ case LCD_ORIENTATION_LANDSCAPE:
+ default:
+ return ili9328Properties.height;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the height in pixels of the LCD screen (varies depending
+ on the current screen orientation)
+*/
+/**************************************************************************/
+uint16_t lcdGetHeight(void)
+{
+ switch (lcdOrientation)
+ {
+ case LCD_ORIENTATION_PORTRAIT:
+ return ili9328Properties.height;
+ break;
+ case LCD_ORIENTATION_LANDSCAPE:
+ default:
+ return ili9328Properties.width;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Scrolls the contents of the LCD screen vertically the
+ specified number of pixels using a HW optimised routine
+*/
+/**************************************************************************/
+void lcdScroll(int16_t pixels, uint16_t fillColor)
+{
+ int16_t y = pixels;
+ while (y < 0)
+ y += 320;
+ while (y >= 320)
+ y -= 320;
+ ili9328WriteCmd(ILI9328_COMMANDS_VERTICALSCROLLCONTROL);
+ ili9328WriteData(y);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the controller's 16-bit (4 hexdigit) ID
+*/
+/**************************************************************************/
+uint16_t lcdGetControllerID(void)
+{
+ return ili9328Type();
+}
+
+/**************************************************************************/
+/*!
+ @brief Returns the LCDs 'lcdProperties_t' that describes the LCDs
+ generic capabilities and dimensions
+*/
+/**************************************************************************/
+lcdProperties_t lcdGetProperties(void)
+{
+ return ili9328Properties;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ILI9328.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __ILI9328_H__
+#define __ILI9328_H__
+
+#include "projectconfig.h"
+
+#include "drivers/lcd/tft/lcd.h"
+#include "core/gpio/gpio.h"
+
+// Control pins
+#define ILI9328_CS_PORT 1 // CS (LCD Pin 7)
+#define ILI9328_CS_PIN 8
+#define ILI9328_CD_PORT 1 // CS/RS (LCD Pin 8)
+#define ILI9328_CD_PIN 9
+#define ILI9328_WR_PORT 1 // WR (LCD Pin 9)
+#define ILI9328_WR_PIN 10
+#define ILI9328_RD_PORT 1 // RD (LCD Pin 10)
+#define ILI9328_RD_PIN 11
+
+// These combined pin definitions are for optimisation purposes.
+// If the pin values above are modified the bit equivalents
+// below will also need to be updated
+#define ILI9328_CS_CD_PINS 0x300 // 8 + 9
+#define ILI9328_RD_WR_PINS 0xC00 // 11 + 10
+#define ILI9328_WR_CS_PINS 0x500 // 10 + 8
+#define ILI9328_CD_RD_WR_PINS 0xE00 // 9 + 11 + 10
+#define ILI9328_CS_CD_RD_WR_PINS 0xF00 // 8 + 9 + 11 + 10
+
+// Backlight and Reset pins
+#define ILI9328_RES_PORT 3 // LCD Reset (LCD Pin 31)
+#define ILI9328_RES_PIN 3
+#define ILI9328_BL_PORT 2 // Backlight Enable (LCD Pin 16)
+#define ILI9328_BL_PIN 9
+
+// Data pins
+// Note: data pins must be consecutive and on the same port
+#define ILI9328_DATA_PORT 2 // 8-Pin Data Port
+#define ILI9328_DATA_PIN1 1
+#define ILI9328_DATA_PIN2 2
+#define ILI9328_DATA_PIN3 3
+#define ILI9328_DATA_PIN4 4
+#define ILI9328_DATA_PIN5 5
+#define ILI9328_DATA_PIN6 6
+#define ILI9328_DATA_PIN7 7
+#define ILI9328_DATA_PIN8 8
+#define ILI9328_DATA_MASK 0x000001FE
+#define ILI9328_DATA_OFFSET 1 // Offset = PIN1
+
+// Placed here to try to keep all pin specific values in header file
+#define ILI9328_DISABLEPULLUPS() do { gpioSetPullup(&IOCON_PIO2_1, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_2, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_3, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_4, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_5, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_6, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_7, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_8, gpioPullupMode_Inactive); } while (0)
+
+// These registers allow fast single operation clear+set of bits (see section 8.5.1 of LPC1343 UM)
+#define ILI9328_GPIO2DATA_DATA (*(pREG32 (GPIO_GPIO2_BASE + (ILI9328_DATA_MASK << 2))))
+#define ILI9328_GPIO1DATA_WR (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ILI9328_WR_PIN) << 2))))
+#define ILI9328_GPIO1DATA_CD (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ILI9328_CD_PIN) << 2))))
+#define ILI9328_GPIO1DATA_CS (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ILI9328_CS_PIN) << 2))))
+#define ILI9328_GPIO1DATA_RD (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ILI9328_RD_PIN) << 2))))
+#define ILI9328_GPIO3DATA_RES (*(pREG32 (GPIO_GPIO3_BASE + ((1 << ILI9328_RES_PIN) << 2))))
+#define ILI9328_GPIO1DATA_CS_CD (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9328_CS_CD_PINS) << 2))))
+#define ILI9328_GPIO1DATA_RD_WR (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9328_RD_WR_PINS) << 2))))
+#define ILI9328_GPIO1DATA_WR_CS (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9328_WR_CS_PINS) << 2))))
+#define ILI9328_GPIO1DATA_CD_RD_WR (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9328_CD_RD_WR_PINS) << 2))))
+#define ILI9328_GPIO1DATA_CS_CD_RD_WR (*(pREG32 (GPIO_GPIO1_BASE + ((ILI9328_CS_CD_RD_WR_PINS) << 2))))
+
+// Macros to set data bus direction to input/output
+#define ILI9328_GPIO2DATA_SETINPUT GPIO_GPIO2DIR &= ~ILI9328_DATA_MASK
+#define ILI9328_GPIO2DATA_SETOUTPUT GPIO_GPIO2DIR |= ILI9328_DATA_MASK
+
+// Macros for control line state
+#define CLR_CD ILI9328_GPIO1DATA_CD = (0)
+#define SET_CD ILI9328_GPIO1DATA_CD = (1 << ILI9328_CD_PIN)
+#define CLR_CS ILI9328_GPIO1DATA_CS = (0)
+#define SET_CS ILI9328_GPIO1DATA_CS = (1 << ILI9328_CS_PIN)
+#define CLR_WR ILI9328_GPIO1DATA_WR = (0)
+#define SET_WR ILI9328_GPIO1DATA_WR = (1 << ILI9328_WR_PIN)
+#define CLR_RD ILI9328_GPIO1DATA_RD = (0)
+#define SET_RD ILI9328_GPIO1DATA_RD = (1 << ILI9328_RD_PIN)
+#define CLR_RESET ILI9328_GPIO3DATA_RES = (0)
+#define SET_RESET ILI9328_GPIO3DATA_RES = (1 << ILI9328_RES_PIN)
+
+// These 'combined' macros are defined to improve code performance by
+// reducing the number of instructions in heavily used functions
+#define CLR_CS_CD ILI9328_GPIO1DATA_CS_CD = (0);
+#define SET_RD_WR ILI9328_GPIO1DATA_RD_WR = (ILI9328_RD_WR_PINS);
+#define SET_WR_CS ILI9328_GPIO1DATA_WR_CS = (ILI9328_WR_CS_PINS);
+#define SET_CD_RD_WR ILI9328_GPIO1DATA_CD_RD_WR = (ILI9328_CD_RD_WR_PINS);
+#define CLR_CS_CD_SET_RD_WR ILI9328_GPIO1DATA_CS_CD_RD_WR = (ILI9328_RD_WR_PINS);
+#define CLR_CS_SET_CD_RD_WR ILI9328_GPIO1DATA_CS_CD_RD_WR = (ILI9328_CD_RD_WR_PINS);
+
+enum
+{
+ ILI9328_COMMANDS_DRIVERCODEREAD = 0x0000,
+ ILI9328_COMMANDS_DRIVEROUTPUTCONTROL1 = 0x0001,
+ ILI9328_COMMANDS_LCDDRIVINGCONTROL = 0x0002,
+ ILI9328_COMMANDS_ENTRYMODE = 0x0003,
+ ILI9328_COMMANDS_RESIZECONTROL = 0x0004,
+ ILI9328_COMMANDS_DISPLAYCONTROL1 = 0x0007,
+ ILI9328_COMMANDS_DISPLAYCONTROL2 = 0x0008,
+ ILI9328_COMMANDS_DISPLAYCONTROL3 = 0x0009,
+ ILI9328_COMMANDS_DISPLAYCONTROL4 = 0x000A,
+ ILI9328_COMMANDS_RGBDISPLAYINTERFACECONTROL1 = 0x000C,
+ ILI9328_COMMANDS_FRAMEMAKERPOSITION = 0x000D,
+ ILI9328_COMMANDS_RGBDISPLAYINTERFACECONTROL2 = 0x000F,
+ ILI9328_COMMANDS_POWERCONTROL1 = 0x0010,
+ ILI9328_COMMANDS_POWERCONTROL2 = 0x0011,
+ ILI9328_COMMANDS_POWERCONTROL3 = 0x0012,
+ ILI9328_COMMANDS_POWERCONTROL4 = 0x0013,
+ ILI9328_COMMANDS_HORIZONTALGRAMADDRESSSET = 0x0020,
+ ILI9328_COMMANDS_VERTICALGRAMADDRESSSET = 0x0021,
+ ILI9328_COMMANDS_WRITEDATATOGRAM = 0x0022,
+ ILI9328_COMMANDS_POWERCONTROL7 = 0x0029,
+ ILI9328_COMMANDS_FRAMERATEANDCOLORCONTROL = 0x002B,
+ ILI9328_COMMANDS_GAMMACONTROL1 = 0x0030,
+ ILI9328_COMMANDS_GAMMACONTROL2 = 0x0031,
+ ILI9328_COMMANDS_GAMMACONTROL3 = 0x0032,
+ ILI9328_COMMANDS_GAMMACONTROL4 = 0x0035,
+ ILI9328_COMMANDS_GAMMACONTROL5 = 0x0036,
+ ILI9328_COMMANDS_GAMMACONTROL6 = 0x0037,
+ ILI9328_COMMANDS_GAMMACONTROL7 = 0x0038,
+ ILI9328_COMMANDS_GAMMACONTROL8 = 0x0039,
+ ILI9328_COMMANDS_GAMMACONTROL9 = 0x003C,
+ ILI9328_COMMANDS_GAMMACONTROL10 = 0x003D,
+ ILI9328_COMMANDS_HORIZONTALADDRESSSTARTPOSITION = 0x0050,
+ ILI9328_COMMANDS_HORIZONTALADDRESSENDPOSITION = 0x0051,
+ ILI9328_COMMANDS_VERTICALADDRESSSTARTPOSITION = 0x0052,
+ ILI9328_COMMANDS_VERTICALADDRESSENDPOSITION = 0x0053,
+ ILI9328_COMMANDS_DRIVEROUTPUTCONTROL2 = 0x0060,
+ ILI9328_COMMANDS_BASEIMAGEDISPLAYCONTROL = 0x0061,
+ ILI9328_COMMANDS_VERTICALSCROLLCONTROL = 0x006A,
+ ILI9328_COMMANDS_PARTIALIMAGE1DISPLAYPOSITION = 0x0080,
+ ILI9328_COMMANDS_PARTIALIMAGE1AREASTARTLINE = 0x0081,
+ ILI9328_COMMANDS_PARTIALIMAGE1AREAENDLINE = 0x0082,
+ ILI9328_COMMANDS_PARTIALIMAGE2DISPLAYPOSITION = 0x0083,
+ ILI9328_COMMANDS_PARTIALIMAGE2AREASTARTLINE = 0x0084,
+ ILI9328_COMMANDS_PARTIALIMAGE2AREAENDLINE = 0x0085,
+ ILI9328_COMMANDS_PANELINTERFACECONTROL1 = 0x0090,
+ ILI9328_COMMANDS_PANELINTERFACECONTROL2 = 0x0092,
+ ILI9328_COMMANDS_PANELINTERFACECONTROL4 = 0x0095,
+ ILI9328_COMMANDS_OTPVCMPROGRAMMINGCONTROL = 0x00A1,
+ ILI9328_COMMANDS_OTPVCMSTATUSANDENABLE = 0x00A2,
+ ILI9328_COMMANDS_OTPPROGRAMMINGIDKEY = 0x00A5
+};
+
+#endif
--- /dev/null
+HW-Specific LCD Drivers
+=======================
+
+ILI9325 - 240x320 16-bit display (8-bit interface)
+ILI9328 - 240x320 16-bit display (8-bit interface)
+st7735 - 128x160 16-bit display (Bit-banged SPI interface)
+st7783 - 240x320 16-bit displays (8-bit interface)
+
+NOTE: Only the ILI9325 and ILI9328 drivers have been fully tested.
+The others are incomplete or have only been partially tested. (The
+ST7783 driver, for example, has issues when the screen orientation
+is set to landscape.)
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file st7735.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section DESCRIPTION
+
+ Driver for st7735 128x160 pixel TFT LCD displays.
+
+ This driver uses a bit-banged SPI interface and a 16-bit RGB565
+ colour palette.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "st7735.h"
+#include "core/systick/systick.h"
+#include "core/gpio/gpio.h"
+
+static lcdOrientation_t lcdOrientation = LCD_ORIENTATION_PORTRAIT;
+static lcdProperties_t st7735Properties = { 128, 160, FALSE, FALSE, FALSE };
+
+/*************************************************/
+/* Private Methods */
+/*************************************************/
+
+/*************************************************/
+void st7735WriteCmd(uint8_t command)
+{
+ CLR_CS;
+ CLR_RS;
+ uint8_t i = 0;
+ for (i=0; i<8; i++)
+ {
+ if (command & 0x80)
+ {
+ SET_SDA;
+ }
+ else
+ {
+ CLR_SDA;
+ }
+ CLR_SCL;
+ command <<= 1;
+ SET_SCL;
+ }
+ SET_CS;
+}
+
+/*************************************************/
+void st7735WriteData(uint8_t data)
+{
+ CLR_CS;
+ SET_RS;
+ uint8_t i = 0;
+ for (i=0; i<8; i++)
+ {
+ if (data & 0x80)
+ {
+ SET_SDA;
+ }
+ else
+ {
+ CLR_SDA;
+ }
+ CLR_SCL;
+ data <<= 1;
+ SET_SCL;
+ }
+ SET_CS;
+}
+
+/*************************************************/
+void st7735SetAddrWindow(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1)
+{
+ st7735WriteCmd(ST7735_CASET); // column addr set
+ st7735WriteData(0x00);
+ st7735WriteData(x0+2); // XSTART
+ st7735WriteData(0x00);
+ st7735WriteData(x1+2); // XEND
+
+ st7735WriteCmd(ST7735_RASET); // row addr set
+ st7735WriteData(0x00);
+ st7735WriteData(y0+1); // YSTART
+ st7735WriteData(0x00);
+ st7735WriteData(y1+1); // YEND
+}
+
+/*************************************************/
+void st7735InitDisplay(void)
+{
+ st7735WriteCmd(ST7735_SWRESET); // software reset
+ systickDelay(50);
+ st7735WriteCmd(ST7735_SLPOUT); // out of sleep mode
+ systickDelay(500);
+
+ st7735WriteCmd(ST7735_COLMOD); // set color mode
+ st7735WriteData(0x05); // 16-bit color
+ systickDelay(10);
+
+ st7735WriteCmd(ST7735_FRMCTR1); // frame rate control
+ st7735WriteData(0x00); // fastest refresh
+ st7735WriteData(0x06); // 6 lines front porch
+ st7735WriteData(0x03); // 3 lines backporch
+ systickDelay(10);
+
+ st7735WriteCmd(ST7735_MADCTL); // memory access control (directions)
+ st7735WriteData(0xC8); // row address/col address, bottom to top refresh
+
+ st7735WriteCmd(ST7735_DISSET5); // display settings #5
+ st7735WriteData(0x15); // 1 clock cycle nonoverlap, 2 cycle gate rise, 3 cycle oscil. equalize
+ st7735WriteData(0x02); // fix on VTL
+
+ st7735WriteCmd(ST7735_INVCTR); // display inversion control
+ st7735WriteData(0x0); // line inversion
+
+ st7735WriteCmd(ST7735_PWCTR1); // power control
+ st7735WriteData(0x02); // GVDD = 4.7V
+ st7735WriteData(0x70); // 1.0uA
+ systickDelay(10);
+ st7735WriteCmd(ST7735_PWCTR2); // power control
+ st7735WriteData(0x05); // VGH = 14.7V, VGL = -7.35V
+ st7735WriteCmd(ST7735_PWCTR3); // power control
+ st7735WriteData(0x01); // Opamp current small
+ st7735WriteData(0x02); // Boost frequency
+
+
+ st7735WriteCmd(ST7735_VMCTR1); // power control
+ st7735WriteData(0x3C); // VCOMH = 4V
+ st7735WriteData(0x38); // VCOML = -1.1V
+ systickDelay(10);
+
+ st7735WriteCmd(ST7735_PWCTR6); // power control
+ st7735WriteData(0x11);
+ st7735WriteData(0x15);
+
+ st7735WriteCmd(ST7735_GMCTRP1);
+ st7735WriteData(0x09);
+ st7735WriteData(0x16);
+ st7735WriteData(0x09);
+ st7735WriteData(0x20);
+ st7735WriteData(0x21);
+ st7735WriteData(0x1B);
+ st7735WriteData(0x13);
+ st7735WriteData(0x19);
+ st7735WriteData(0x17);
+ st7735WriteData(0x15);
+ st7735WriteData(0x1E);
+ st7735WriteData(0x2B);
+ st7735WriteData(0x04);
+ st7735WriteData(0x05);
+ st7735WriteData(0x02);
+ st7735WriteData(0x0E);
+ st7735WriteCmd(ST7735_GMCTRN1);
+ st7735WriteData(0x0B);
+ st7735WriteData(0x14);
+ st7735WriteData(0x08);
+ st7735WriteData(0x1E);
+ st7735WriteData(0x22);
+ st7735WriteData(0x1D);
+ st7735WriteData(0x18);
+ st7735WriteData(0x1E);
+ st7735WriteData(0x1B);
+ st7735WriteData(0x1A);
+ st7735WriteData(0x24);
+ st7735WriteData(0x2B);
+ st7735WriteData(0x06);
+ st7735WriteData(0x06);
+ st7735WriteData(0x02);
+ st7735WriteData(0x0F);
+ systickDelay(10);
+
+ st7735WriteCmd(ST7735_CASET); // column addr set
+ st7735WriteData(0x00);
+ st7735WriteData(0x02); // XSTART = 2
+ st7735WriteData(0x00);
+ st7735WriteData(0x81); // XEND = 129
+
+ st7735WriteCmd(ST7735_RASET); // row addr set
+ st7735WriteData(0x00);
+ st7735WriteData(0x02); // XSTART = 1
+ st7735WriteData(0x00);
+ st7735WriteData(0x81); // XEND = 160
+
+ st7735WriteCmd(ST7735_NORON); // normal display on
+ systickDelay(10);
+
+ st7735WriteCmd(ST7735_DISPON);
+ systickDelay(500);
+}
+
+/*************************************************/
+/* Public Methods */
+/*************************************************/
+
+/*************************************************/
+void lcdInit(void)
+{
+ // Set control pins to output
+ gpioSetDir(ST7735_PORT, ST7735_RS_PIN, 1);
+ gpioSetDir(ST7735_PORT, ST7735_SDA_PIN, 1);
+ gpioSetDir(ST7735_PORT, ST7735_SCL_PIN, 1);
+ gpioSetDir(ST7735_PORT, ST7735_CS_PIN, 1);
+ gpioSetDir(ST7735_PORT, ST7735_RES_PIN, 1);
+ gpioSetDir(ST7735_PORT, ST7735_BL_PIN, 1);
+
+ // Set pins low by default (except reset)
+ CLR_RS;
+ CLR_SDA;
+ CLR_SCL;
+ CLR_CS;
+ CLR_BL;
+ SET_RES;
+
+ // Turn backlight on
+ lcdBacklight(TRUE);
+
+ // Reset display
+ SET_RES;
+ systickDelay(50);
+ CLR_RES;
+ systickDelay(50);
+ SET_RES;
+ systickDelay(50);
+
+ // Run LCD init sequence
+ st7735InitDisplay();
+
+ // Fill black
+ lcdFillRGB(COLOR_BLACK);
+}
+
+/*************************************************/
+void lcdBacklight(bool state)
+{
+ // Set the backlight
+ // Note: Depending on the type of transistor used
+ // to control the backlight, you made need to invert
+ // the values below
+ if (state)
+ // CLR_BL;
+ SET_BL;
+ else
+ // SET_BL;
+ CLR_BL;
+}
+
+/*************************************************/
+void lcdTest(void)
+{
+ uint8_t i = 0;
+ for (i = 0; i < 100; i++)
+ {
+ lcdDrawPixel(i, i, 0xFFFF);
+ }
+}
+
+/*************************************************/
+void lcdFillRGB(uint16_t color)
+{
+ uint8_t x, y;
+ st7735SetAddrWindow(0, 0, lcdGetWidth() - 1, lcdGetHeight() - 1);
+ st7735WriteCmd(ST7735_RAMWR); // write to RAM
+ for (x=0; x < lcdGetWidth(); x++)
+ {
+ for (y=0; y < lcdGetHeight(); y++)
+ {
+ st7735WriteData(color >> 8);
+ st7735WriteData(color);
+ }
+ }
+ st7735WriteCmd(ST7735_NOP);
+}
+
+/*************************************************/
+void lcdDrawPixel(uint16_t x, uint16_t y, uint16_t color)
+{
+ st7735SetAddrWindow(x,y,x+1,y+1);
+ st7735WriteCmd(ST7735_RAMWR); // write to RAM
+ st7735WriteData(color >> 8);
+ st7735WriteData(color);
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws an array of consecutive RGB565 pixels (much
+ faster than addressing each pixel individually)
+*/
+/**************************************************************************/
+void lcdDrawPixels(uint16_t x, uint16_t y, uint16_t *data, uint32_t len)
+{
+ // ToDo: Optimise this function ... currently only a placeholder
+ uint32_t i = 0;
+ do
+ {
+ lcdDrawPixel(x+i, y, data[i]);
+ i++;
+ } while (i<len);
+}
+
+/*************************************************/
+void lcdDrawHLine(uint16_t x0, uint16_t x1, uint16_t y, uint16_t color)
+{
+ // Allows for slightly better performance than setting individual pixels
+ uint16_t x, pixels;
+
+ if (x1 < x0)
+ {
+ // Switch x1 and x0
+ x = x1;
+ x1 = x0;
+ x0 = x;
+ }
+
+ // Check limits
+ if (x1 >= lcdGetWidth())
+ {
+ x1 = lcdGetWidth() - 1;
+ }
+ if (x0 >= lcdGetWidth())
+ {
+ x0 = lcdGetWidth() - 1;
+ }
+
+ st7735SetAddrWindow(x0, y, lcdGetWidth(), y + 1);
+ st7735WriteCmd(ST7735_RAMWR); // write to RAM
+ for (pixels = 0; pixels < x1 - x0 + 1; pixels++)
+ {
+ st7735WriteData(color >> 8);
+ st7735WriteData(color);
+ }
+ st7735WriteCmd(ST7735_NOP);
+}
+
+/*************************************************/
+void lcdDrawVLine(uint16_t x, uint16_t y0, uint16_t y1, uint16_t color)
+{
+ // Allows for slightly better performance than setting individual pixels
+ uint16_t y, pixels;
+
+ if (y1 < y0)
+ {
+ // Switch y1 and y0
+ y = y1;
+ y1 = y0;
+ y0 = y;
+ }
+
+ // Check limits
+ if (y1 >= lcdGetHeight())
+ {
+ y1 = lcdGetHeight() - 1;
+ }
+ if (y0 >= lcdGetHeight())
+ {
+ y0 = lcdGetHeight() - 1;
+ }
+
+ st7735SetAddrWindow(x, y0, x, lcdGetHeight());
+ st7735WriteCmd(ST7735_RAMWR); // write to RAM
+ for (pixels = 0; pixels < y1 - y0 + 1; pixels++)
+ {
+ st7735WriteData(color >> 8);
+ st7735WriteData(color);
+ }
+ st7735WriteCmd(ST7735_NOP);
+}
+
+/*************************************************/
+uint16_t lcdGetPixel(uint16_t x, uint16_t y)
+{
+ // ToDo
+ return 0;
+}
+
+/*************************************************/
+void lcdSetOrientation(lcdOrientation_t orientation)
+{
+ // ToDo
+}
+
+/*************************************************/
+lcdOrientation_t lcdGetOrientation(void)
+{
+ return lcdOrientation;
+}
+
+/*************************************************/
+uint16_t lcdGetWidth(void)
+{
+ return st7735Properties.width;
+}
+
+/*************************************************/
+uint16_t lcdGetHeight(void)
+{
+ return st7735Properties.height;
+}
+
+/*************************************************/
+void lcdScroll(int16_t pixels, uint16_t fillColor)
+{
+ // ToDo
+}
+
+/*************************************************/
+uint16_t lcdGetControllerID(void)
+{
+ // ToDo
+ return 0;
+}
+
+/*************************************************/
+lcdProperties_t lcdGetProperties(void)
+{
+ return st7735Properties;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ST7735.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __ST7735_H__
+#define __ST7735_H__
+
+#include "projectconfig.h"
+#include "drivers/lcd/tft/lcd.h"
+
+/**************************************************************************
+ ST7735 CONNECTOR
+ -----------------------------------------------------------------------
+ Pin Function Notes
+ === ============== ===============================
+ 1 NC
+ 2 GND
+ 3 LED K/-
+ 4 LED A/+ 3.0V
+ 5 GND
+ 6 RESET
+ 7 RS
+ 8 SDA Serial Data
+ 9 SCL Serial Clock
+ 10 VCC 2.8-3.4V
+ 11 VCC 2.8-3.4V
+ 12 CS
+ 13 GND
+ 14 NC
+
+ **************************************************************************/
+
+// Control pins
+#define ST7735_GPIODATAREG (*(pREG32 (0x50023FFC))) // GPIO2DATA
+#define ST7735_PORT (2)
+#define ST7735_RS_PIN (1)
+#define ST7735_SDA_PIN (2)
+#define ST7735_SCL_PIN (3)
+#define ST7735_CS_PIN (4)
+#define ST7735_RES_PIN (5)
+#define ST7735_BL_PIN (6)
+
+// Macros for control line state
+#define CLR_RS do { ST7735_GPIODATAREG &= ~(1<<ST7735_RS_PIN); } while(0)
+#define SET_RS do { ST7735_GPIODATAREG &= ~(1<<ST7735_RS_PIN); ST7735_GPIODATAREG |= (1<<ST7735_RS_PIN); } while(0)
+#define CLR_SDA do { ST7735_GPIODATAREG &= ~(1<<ST7735_SDA_PIN); } while(0)
+#define SET_SDA do { ST7735_GPIODATAREG &= ~(1<<ST7735_SDA_PIN); ST7735_GPIODATAREG |= (1<<ST7735_SDA_PIN); } while(0)
+#define CLR_SCL do { ST7735_GPIODATAREG &= ~(1<<ST7735_SCL_PIN); } while(0)
+#define SET_SCL do { ST7735_GPIODATAREG &= ~(1<<ST7735_SCL_PIN); ST7735_GPIODATAREG |= (1<<ST7735_SCL_PIN); } while(0)
+#define CLR_CS do { ST7735_GPIODATAREG &= ~(1<<ST7735_CS_PIN); } while(0)
+#define SET_CS do { ST7735_GPIODATAREG &= ~(1<<ST7735_CS_PIN); ST7735_GPIODATAREG |= (1<<ST7735_CS_PIN); } while(0)
+#define CLR_RES do { ST7735_GPIODATAREG &= ~(1<<ST7735_RES_PIN); } while(0)
+#define SET_RES do { ST7735_GPIODATAREG &= ~(1<<ST7735_RES_PIN); ST7735_GPIODATAREG |= (1<<ST7735_RES_PIN); } while(0)
+#define CLR_BL do { ST7735_GPIODATAREG &= ~(1<<ST7735_BL_PIN); } while(0)
+#define SET_BL do { ST7735_GPIODATAREG &= ~(1<<ST7735_BL_PIN); ST7735_GPIODATAREG |= (1<<ST7735_BL_PIN); } while(0)
+
+#define ST7735_NOP (0x0)
+#define ST7735_SWRESET (0x01)
+#define ST7735_SLPIN (0x10)
+#define ST7735_SLPOUT (0x11)
+#define ST7735_PTLON (0x12)
+#define ST7735_NORON (0x13)
+#define ST7735_INVOFF (0x20)
+#define ST7735_INVON (0x21)
+#define ST7735_DISPON (0x29)
+#define ST7735_CASET (0x2A)
+#define ST7735_RASET (0x2B)
+#define ST7735_RAMWR (0x2C)
+#define ST7735_COLMOD (0x3A)
+#define ST7735_MADCTL (0x36)
+#define ST7735_FRMCTR1 (0xB1)
+#define ST7735_INVCTR (0xB4)
+#define ST7735_DISSET5 (0xB6)
+#define ST7735_PWCTR1 (0xC0)
+#define ST7735_PWCTR2 (0xC1)
+#define ST7735_PWCTR3 (0xC2)
+#define ST7735_VMCTR1 (0xC5)
+#define ST7735_PWCTR6 (0xFC)
+#define ST7735_GMCTRP1 (0xE0)
+#define ST7735_GMCTRN1 (0xE1)
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file st7783.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section DESCRIPTION
+
+ Driver for st7783 240x320 pixel TFT LCD displays.
+
+ This driver uses an 8-bit interface and a 16-bit RGB565 colour palette.
+
+ @section UPDATES
+
+ 26-11-2010: st7783ReadData contributed by Adafruit Industries
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "st7783.h"
+#include "core/systick/systick.h"
+#include "drivers/lcd/tft/touchscreen.h"
+
+static lcdOrientation_t lcdOrientation = LCD_ORIENTATION_PORTRAIT;
+static lcdProperties_t st7783Properties = { 240, 320, TRUE, TRUE, FALSE };
+
+/*************************************************/
+/* Private Methods */
+/*************************************************/
+
+/*************************************************/
+void st7783Delay(unsigned int t)
+{
+ unsigned char t1;
+ while(t--)
+ for ( t1=10; t1 > 0; t1-- )
+ {
+ __asm("nop");
+ }
+}
+
+/*************************************************/
+void st7783WriteCmd(uint16_t command)
+{
+ // Compiled with -Os on GCC 4.4 this works out to 25 cycles
+ // (versus 36 compiled with no optimisations). I'm not sure it
+ // can be improved further, so that means 25 cycles/350nS for
+ // continuous writes (cmd, data, data, data, ...) or ~150 cycles/
+ // ~2.1uS for a random pixel (Set X [cmd+data], Set Y [cmd+data],
+ // Set color [cmd+data]) (times assumes 72MHz clock).
+
+ CLR_CS_CD_SET_RD_WR; // Saves 18 commands compared to "CLR_CS; CLR_CD; SET_RD; SET_WR;"
+ ST7783_GPIO2DATA_DATA = (command >> (8 - ST7783_DATA_OFFSET));
+ CLR_WR;
+ SET_WR;
+ ST7783_GPIO2DATA_DATA = command << ST7783_DATA_OFFSET;
+ CLR_WR;
+ SET_WR_CS; // Saves 7 commands compared to "SET_WR; SET_CS;"
+}
+
+/*************************************************/
+void st7783WriteData(uint16_t data)
+{
+ CLR_CS_SET_CD_RD_WR; // Saves 18 commands compared to SET_CD; SET_RD; SET_WR; CLR_CS"
+ ST7783_GPIO2DATA_DATA = (data >> (8 - ST7783_DATA_OFFSET));
+ CLR_WR;
+ SET_WR;
+ ST7783_GPIO2DATA_DATA = data << ST7783_DATA_OFFSET;
+ CLR_WR;
+ SET_WR_CS; // Saves 7 commands compared to "SET_WR, SET_CS;"
+}
+
+/*************************************************/
+uint16_t st7783ReadData(void)
+{
+ // ToDo: Optimise this method!
+
+ uint16_t high, low;
+ high = low = 0;
+ uint16_t d;
+
+ SET_CD_RD_WR; // Saves 14 commands compared to "SET_CD; SET_RD; SET_WR"
+ CLR_CS;
+
+ // set inputs
+ ST7783_GPIO2DATA_SETINPUT;
+ CLR_RD;
+ st7783Delay(100);
+ high = ST7783_GPIO2DATA_DATA;
+ high >>= ST7783_DATA_OFFSET;
+ high &= 0xFF;
+ SET_RD;
+
+ CLR_RD;
+ st7783Delay(100);
+ low = ST7783_GPIO2DATA_DATA;
+ low >>= ST7783_DATA_OFFSET;
+ low &=0xFF;
+ SET_RD;
+
+ SET_CS;
+ ST7783_GPIO2DATA_SETOUTPUT;
+
+ d = high;
+ d <<= 8;
+ d |= low;
+
+ return d;
+}
+
+/*************************************************/
+uint16_t st7783Read(uint16_t addr)
+{
+ st7783WriteCmd(addr);
+ return st7783ReadData();
+}
+
+/*************************************************/
+void st7783Command(uint16_t command, uint16_t data)
+{
+ st7783WriteCmd(command);
+ st7783WriteData(data);
+}
+
+/*************************************************/
+/* Returns the 4-hexdigit controller code */
+/*************************************************/
+uint16_t st7783Type(void)
+{
+ st7783WriteCmd(0x0);
+ return st7783ReadData();
+}
+
+/*************************************************/
+void st7783SetCursor(uint16_t x, uint16_t y)
+{
+ uint16_t he, ve, al, ah;
+
+ switch (lcdOrientation)
+ {
+ case LCD_ORIENTATION_LANDSCAPE:
+ he = st7783Properties.width-1-y;
+ ve = st7783Properties.height-1-x;
+ al = y;
+ ah = x;
+ break;
+ case LCD_ORIENTATION_PORTRAIT:
+ default:
+ he = st7783Properties.width-1;
+ ve = st7783Properties.height-1;
+ al = x;
+ ah = y;
+ break;
+ }
+ st7783Command(0x0051, he);
+ st7783Command(0x0053, ve);
+ st7783Command(0x0020, al);
+ st7783Command(0x0021, ah);
+}
+
+/*************************************************/
+void st7783InitDisplay(void)
+{
+ // Clear data line
+ GPIO_GPIO2DATA &= ~ST7783_DATA_MASK;
+
+ SET_RD;
+ SET_WR;
+ SET_CS;
+ SET_CD;
+
+ // Reset display
+ CLR_RESET;
+ st7783Delay(10000);
+ SET_RESET;
+ st7783Delay(500);
+
+ st7783Command(0x00FF, 0x0001);
+ st7783Command(0x00F3, 0x0008);
+ st7783WriteCmd(0x00F3);
+
+ st7783Command(0x0001, 0x0100); // Driver Output Control Register (R01h)
+ st7783Command(0x0002, 0x0700); // LCD Driving Waveform Control (R02h)
+ st7783Command(0x0003, 0x1030); // Entry Mode (R03h)
+ st7783Command(0x0008, 0x0302);
+ st7783Command(0x0009, 0x0000);
+ st7783Command(0x0010, 0x0000); // Power Control 1 (R10h)
+ st7783Command(0x0011, 0x0007); // Power Control 2 (R11h)
+ st7783Command(0x0012, 0x0000); // Power Control 3 (R12h)
+ st7783Command(0x0013, 0x0000); // Power Control 4 (R13h)
+ st7783Delay(1000);
+ st7783Command(0x0010, 0x14B0); // Power Control 1 (R10h)
+ st7783Delay(500);
+ st7783Command(0x0011, 0x0007); // Power Control 2 (R11h)
+ st7783Delay(500);
+ st7783Command(0x0012, 0x008E); // Power Control 3 (R12h)
+ st7783Command(0x0013, 0x0C00); // Power Control 4 (R13h)
+ st7783Command(0x0029, 0x0015); // NVM read data 2 (R29h)
+ st7783Delay(500);
+ st7783Command(0x0030, 0x0000); // Gamma Control 1
+ st7783Command(0x0031, 0x0107); // Gamma Control 2
+ st7783Command(0x0032, 0x0000); // Gamma Control 3
+ st7783Command(0x0035, 0x0203); // Gamma Control 6
+ st7783Command(0x0036, 0x0402); // Gamma Control 7
+ st7783Command(0x0037, 0x0000); // Gamma Control 8
+ st7783Command(0x0038, 0x0207); // Gamma Control 9
+ st7783Command(0x0039, 0x0000); // Gamma Control 10
+ st7783Command(0x003C, 0x0203); // Gamma Control 13
+ st7783Command(0x003D, 0x0403); // Gamma Control 14
+ st7783Command(0x0050, 0x0000); // Window Horizontal RAM Address Start (R50h)
+ st7783Command(0x0051, st7783Properties.width - 1); // Window Horizontal RAM Address End (R51h)
+ st7783Command(0x0052, 0X0000); // Window Vertical RAM Address Start (R52h)
+ st7783Command(0x0053, st7783Properties.height - 1); // Window Vertical RAM Address End (R53h)
+ st7783Command(0x0060, 0xa700); // Driver Output Control (R60h)
+ st7783Command(0x0061, 0x0001); // Driver Output Control (R61h)
+ st7783Command(0x0090, 0X0029); // Panel Interface Control 1 (R90h)
+
+ // Display On
+ st7783Command(0x0007, 0x0133); // Display Control (R07h)
+ st7783Delay(500);
+ st7783WriteCmd(0x0022);
+}
+
+/*************************************************/
+void st7783Home(void)
+{
+ st7783SetCursor(0, 0);
+ st7783WriteCmd(0x0022); // Write Data to GRAM (R22h)
+}
+
+/*************************************************/
+void st7783SetWindow(uint16_t x, uint16_t y, uint16_t height, uint16_t width)
+{
+ // Window horizontal RAM address start
+ if (x >= height) st7783Command(0x50, (x - height + 1));
+ else st7783Command(0x50, 0);
+ // Window horizontal GRAM address end
+ st7783Command(0x51, x);
+ // Window vertical GRAM address start
+ if (y >= width) st7783Command(0x52, (y - width + 1));
+ else st7783Command(0x52, 0);
+ // Window vertical GRAM address end
+ st7783Command(0x53, y);
+
+ st7783SetCursor(x, y);
+}
+
+/*************************************************/
+/* Public Methods */
+/*************************************************/
+
+/*************************************************/
+void lcdInit(void)
+{
+ // Set control line pins to output
+ gpioSetDir(ST7783_CS_PORT, ST7783_CS_PIN, 1);
+ gpioSetDir(ST7783_CD_PORT, ST7783_CD_PIN, 1);
+ gpioSetDir(ST7783_WR_PORT, ST7783_WR_PIN, 1);
+ gpioSetDir(ST7783_RD_PORT, ST7783_RD_PIN, 1);
+
+ // Set data port pins to output
+ ST7783_GPIO2DATA_SETOUTPUT;
+
+ // Disable pullups
+ ST7783_DISABLEPULLUPS();
+
+ // Set backlight pin to output and turn it on
+ gpioSetDir(ST7783_BL_PORT, ST7783_BL_PIN, 1); // set to output
+ lcdBacklight(TRUE);
+
+ // Set reset pin to output
+ gpioSetDir(ST7783_RES_PORT, ST7783_RES_PIN, 1); // Set to output
+ gpioSetValue(ST7783_RES_PORT, ST7783_RES_PIN, 0); // Low to reset
+ systickDelay(50);
+ gpioSetValue(ST7783_RES_PORT, ST7783_RES_PIN, 1); // High to exit
+
+ // Initialize the display
+ st7783InitDisplay();
+
+ // Set lcd to default orientation
+ lcdSetOrientation(lcdOrientation);
+
+ // Fill black
+ lcdFillRGB(COLOR_BLACK);
+
+ // Initialise the touch screen (and calibrate if necessary)
+ tsInit();
+}
+
+/*************************************************/
+void lcdBacklight(bool state)
+{
+ // Set the backlight
+ gpioSetValue(ST7783_BL_PORT, ST7783_BL_PIN, state ? 0 : 1);
+}
+
+/*************************************************/
+void lcdTest(void)
+{
+ uint32_t i,j;
+ st7783Home();
+
+ for(i=0;i<320;i++)
+ {
+ for(j=0;j<240;j++)
+ {
+ if(i>279)st7783WriteData(COLOR_WHITE);
+ else if(i>239)st7783WriteData(COLOR_BLUE);
+ else if(i>199)st7783WriteData(COLOR_GREEN);
+ else if(i>159)st7783WriteData(COLOR_CYAN);
+ else if(i>119)st7783WriteData(COLOR_RED);
+ else if(i>79)st7783WriteData(COLOR_MAGENTA);
+ else if(i>39)st7783WriteData(COLOR_YELLOW);
+ else st7783WriteData(COLOR_BLACK);
+ }
+ }
+}
+
+/*************************************************/
+void lcdFillRGB(uint16_t data)
+{
+ unsigned int i;
+ st7783Home();
+
+ uint32_t pixels = 320*240;
+ for ( i=0; i < pixels; i++ )
+ {
+ st7783WriteData(data);
+ }
+}
+
+/*************************************************/
+void lcdDrawPixel(uint16_t x, uint16_t y, uint16_t color)
+{
+ st7783SetCursor(x, y);
+ st7783WriteCmd(0x0022); // Write Data to GRAM (R22h)
+ st7783WriteData(color);
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws an array of consecutive RGB565 pixels (much
+ faster than addressing each pixel individually)
+*/
+/**************************************************************************/
+void lcdDrawPixels(uint16_t x, uint16_t y, uint16_t *data, uint32_t len)
+{
+ uint32_t i = 0;
+ st7783SetCursor(x, y);
+ st7783WriteCmd(0x0022); // Write Data to GRAM (R22h)
+ do
+ {
+ st7783WriteData(data[i]);
+ i++;
+ } while (i<len);
+}
+
+/*************************************************/
+void lcdDrawHLine(uint16_t x0, uint16_t x1, uint16_t y, uint16_t color)
+{
+ // Allows for slightly better performance than setting individual pixels
+ uint16_t x, pixels;
+
+ if (x1 < x0)
+ {
+ // Switch x1 and x0
+ x = x1;
+ x1 = x0;
+ x0 = x;
+ }
+ st7783SetCursor(x0, y);
+ st7783WriteCmd(0x0022); // Write Data to GRAM (R22h)
+ for (pixels = 0; pixels < x1 - x0 + 1; pixels++)
+ {
+ st7783WriteData(color);
+ }
+}
+
+/*************************************************/
+void lcdDrawVLine(uint16_t x, uint16_t y0, uint16_t y1, uint16_t color)
+{
+ // Allows for slightly better performance than setting individual pixels
+ lcdOrientation_t orientation = lcdOrientation;
+
+ // Switch orientation
+ lcdSetOrientation(orientation == LCD_ORIENTATION_PORTRAIT ? LCD_ORIENTATION_LANDSCAPE : LCD_ORIENTATION_PORTRAIT);
+
+ // Draw horizontal line like usual
+ lcdDrawHLine(y0, y1, lcdGetHeight() - x, color);
+
+ // Switch orientation back
+ lcdSetOrientation(orientation);
+}
+
+/*************************************************/
+uint16_t lcdGetPixel(uint16_t x, uint16_t y)
+{
+ uint16_t preFetch = 0;
+
+ st7783SetCursor(x, y);
+ st7783WriteCmd(0x0022);
+ preFetch = st7783ReadData();
+
+ // Eeek ... why does this need to be done twice for a proper value?!?
+ st7783SetCursor(x, y);
+ st7783WriteCmd(0x0022);
+ return st7783ReadData();
+}
+
+/*************************************************/
+void lcdSetOrientation(lcdOrientation_t orientation)
+{
+ uint16_t entryMode = 0x1030;
+
+ switch (orientation)
+ {
+ case LCD_ORIENTATION_PORTRAIT:
+ entryMode = 0x1030;
+ break;
+ case LCD_ORIENTATION_LANDSCAPE:
+ entryMode = 0x1028;
+ break;
+ }
+ st7783WriteCmd(0x0003);
+ st7783WriteData(entryMode);
+ lcdOrientation = orientation;
+ st7783SetCursor(0, 0);
+}
+
+/*************************************************/
+lcdOrientation_t lcdGetOrientation(void)
+{
+ return lcdOrientation;
+}
+
+/*************************************************/
+uint16_t lcdGetWidth(void)
+{
+ switch (lcdOrientation)
+ {
+ case LCD_ORIENTATION_PORTRAIT:
+ return st7783Properties.width;
+ break;
+ case LCD_ORIENTATION_LANDSCAPE:
+ default:
+ return st7783Properties.height;
+ }
+}
+
+/*************************************************/
+uint16_t lcdGetHeight(void)
+{
+ switch (lcdOrientation)
+ {
+ case LCD_ORIENTATION_PORTRAIT:
+ return st7783Properties.height;
+ break;
+ case LCD_ORIENTATION_LANDSCAPE:
+ default:
+ return st7783Properties.width;
+ }
+}
+
+/*************************************************/
+void lcdScroll(int16_t pixels, uint16_t fillColor)
+{
+ // Not implemented in ST7783
+}
+
+/*************************************************/
+uint16_t lcdGetControllerID(void)
+{
+ return st7783Type();
+}
+
+/*************************************************/
+lcdProperties_t lcdGetProperties(void)
+{
+ return st7783Properties;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file ST7783.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __ST7783_H__
+#define __ST7783_H__
+
+#include "projectconfig.h"
+
+#include "drivers/lcd/tft/lcd.h"
+#include "core/gpio/gpio.h"
+
+// Control pins
+#define ST7783_CS_PORT 1 // CS (LCD Pin 7)
+#define ST7783_CS_PIN 8
+#define ST7783_CD_PORT 1 // CS/RS (LCD Pin 8)
+#define ST7783_CD_PIN 9
+#define ST7783_WR_PORT 1 // WR (LCD Pin 9)
+#define ST7783_WR_PIN 10
+#define ST7783_RD_PORT 1 // RD (LCD Pin 10)
+#define ST7783_RD_PIN 11
+
+// These combined pin definitions are for optimisation purposes.
+// If the pin values above are modified the bit equivalents
+// below will also need to be updated
+#define ST7783_CS_CD_PINS 0x300 // 8 + 9
+#define ST7783_RD_WR_PINS 0xC00 // 11 + 10
+#define ST7783_WR_CS_PINS 0x500 // 10 + 8
+#define ST7783_CD_RD_WR_PINS 0xE00 // 9 + 11 + 10
+#define ST7783_CS_CD_RD_WR_PINS 0xF00 // 8 + 9 + 11 + 10
+
+// Backlight and Reset pins
+#define ST7783_RES_PORT 3 // LCD Reset (LCD Pin 31)
+#define ST7783_RES_PIN 3
+#define ST7783_BL_PORT 2 // Backlight Enable (LCD Pin 16)
+#define ST7783_BL_PIN 9
+
+// Data pins
+// Note: data pins must be consecutive and on the same port
+#define ST7783_DATA_PORT 2 // 8-Pin Data Port
+#define ST7783_DATA_PIN1 1
+#define ST7783_DATA_PIN2 2
+#define ST7783_DATA_PIN3 3
+#define ST7783_DATA_PIN4 4
+#define ST7783_DATA_PIN5 5
+#define ST7783_DATA_PIN6 6
+#define ST7783_DATA_PIN7 7
+#define ST7783_DATA_PIN8 8
+#define ST7783_DATA_MASK 0x000001FE
+#define ST7783_DATA_OFFSET 1 // Offset = PIN1
+
+// Placed here to try to keep all pin specific values in header file
+#define ST7783_DISABLEPULLUPS() do { gpioSetPullup(&IOCON_PIO2_1, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_2, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_3, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_4, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_5, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_6, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_7, gpioPullupMode_Inactive); \
+ gpioSetPullup(&IOCON_PIO2_8, gpioPullupMode_Inactive); } while (0)
+
+// These registers allow fast single operation clear+set of bits (see section 8.5.1 of LPC1343 UM)
+#define ST7783_GPIO2DATA_DATA (*(pREG32 (GPIO_GPIO2_BASE + (ST7783_DATA_MASK << 2))))
+#define ST7783_GPIO1DATA_WR (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ST7783_WR_PIN) << 2))))
+#define ST7783_GPIO1DATA_CD (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ST7783_CD_PIN) << 2))))
+#define ST7783_GPIO1DATA_CS (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ST7783_CS_PIN) << 2))))
+#define ST7783_GPIO1DATA_RD (*(pREG32 (GPIO_GPIO1_BASE + ((1 << ST7783_RD_PIN) << 2))))
+#define ST7783_GPIO3DATA_RES (*(pREG32 (GPIO_GPIO3_BASE + ((1 << ST7783_RES_PIN) << 2))))
+#define ST7783_GPIO1DATA_CS_CD (*(pREG32 (GPIO_GPIO1_BASE + ((ST7783_CS_CD_PINS) << 2))))
+#define ST7783_GPIO1DATA_RD_WR (*(pREG32 (GPIO_GPIO1_BASE + ((ST7783_RD_WR_PINS) << 2))))
+#define ST7783_GPIO1DATA_WR_CS (*(pREG32 (GPIO_GPIO1_BASE + ((ST7783_WR_CS_PINS) << 2))))
+#define ST7783_GPIO1DATA_CD_RD_WR (*(pREG32 (GPIO_GPIO1_BASE + ((ST7783_CD_RD_WR_PINS) << 2))))
+#define ST7783_GPIO1DATA_CS_CD_RD_WR (*(pREG32 (GPIO_GPIO1_BASE + ((ST7783_CS_CD_RD_WR_PINS) << 2))))
+
+// Macros to set data bus direction to input/output
+#define ST7783_GPIO2DATA_SETINPUT GPIO_GPIO2DIR &= ~ST7783_DATA_MASK
+#define ST7783_GPIO2DATA_SETOUTPUT GPIO_GPIO2DIR |= ST7783_DATA_MASK
+
+// Macros for control line state
+#define CLR_CD ST7783_GPIO1DATA_CD = (0)
+#define SET_CD ST7783_GPIO1DATA_CD = (1 << ST7783_CD_PIN)
+#define CLR_CS ST7783_GPIO1DATA_CS = (0)
+#define SET_CS ST7783_GPIO1DATA_CS = (1 << ST7783_CS_PIN)
+#define CLR_WR ST7783_GPIO1DATA_WR = (0)
+#define SET_WR ST7783_GPIO1DATA_WR = (1 << ST7783_WR_PIN)
+#define CLR_RD ST7783_GPIO1DATA_RD = (0)
+#define SET_RD ST7783_GPIO1DATA_RD = (1 << ST7783_RD_PIN)
+#define CLR_RESET ST7783_GPIO3DATA_RES = (0)
+#define SET_RESET ST7783_GPIO3DATA_RES = (1 << ST7783_RES_PIN)
+
+// These 'combined' macros are defined to improve code performance by
+// reducing the number of instructions in heavily used functions
+#define CLR_CS_CD ST7783_GPIO1DATA_CS_CD = (0);
+#define SET_RD_WR ST7783_GPIO1DATA_RD_WR = (ST7783_RD_WR_PINS);
+#define SET_WR_CS ST7783_GPIO1DATA_WR_CS = (ST7783_WR_CS_PINS);
+#define SET_CD_RD_WR ST7783_GPIO1DATA_CD_RD_WR = (ST7783_CD_RD_WR_PINS);
+#define CLR_CS_CD_SET_RD_WR ST7783_GPIO1DATA_CS_CD_RD_WR = (ST7783_RD_WR_PINS);
+#define CLR_CS_SET_CD_RD_WR ST7783_GPIO1DATA_CS_CD_RD_WR = (ST7783_CD_RD_WR_PINS);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file
+ @author
+
+ @section DESCRIPTION
+
+ TODO
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "core/systick/systick.h"
+#include "drivers/lcd/tft/touchscreen.h"
+
+// Screen width, height, has touchscreen, support orientation changes, support hw scrolling
+static lcdProperties_t templateProperties = { 240, 320, false, false, false };
+
+/*************************************************/
+/* Private Methods */
+/*************************************************/
+
+// Todo: Functions to init the LCD, send commands, etc.
+
+/*************************************************/
+/* Public Methods */
+/*************************************************/
+
+// The following functions add need to be written to match the generic
+// lcd interface defined by lcd.h
+
+/**************************************************************************/
+/*!
+ @brief Configures any pins or HW and initialises the LCD controller
+*/
+/**************************************************************************/
+void lcdInit(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Enables or disables the LCD backlight
+*/
+/**************************************************************************/
+void lcdBacklight(bool state)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Renders a simple test pattern on the LCD
+*/
+/**************************************************************************/
+void lcdTest(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Fills the LCD with the specified 16-bit color
+*/
+/**************************************************************************/
+void lcdFillRGB(uint16_t data)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws a single pixel at the specified X/Y location
+*/
+/**************************************************************************/
+void lcdDrawPixel(uint16_t x, uint16_t y, uint16_t color)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Draws an array of consecutive RGB565 pixels (much
+ faster than addressing each pixel individually)
+*/
+/**************************************************************************/
+void lcdDrawPixels(uint16_t x, uint16_t y, uint16_t *data, uint32_t len)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Optimised routine to draw a horizontal line faster than
+ setting individual pixels
+*/
+/**************************************************************************/
+void lcdDrawHLine(uint16_t x0, uint16_t x1, uint16_t y, uint16_t color)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Optimised routine to draw a vertical line faster than
+ setting individual pixels
+*/
+/**************************************************************************/
+void lcdDrawVLine(uint16_t x, uint16_t y0, uint16_t y1, uint16_t color)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the 16-bit color of the pixel at the specified location
+*/
+/**************************************************************************/
+uint16_t lcdGetPixel(uint16_t x, uint16_t y)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the LCD orientation to horizontal and vertical
+*/
+/**************************************************************************/
+void lcdSetOrientation(lcdOrientation_t orientation)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the current screen orientation (horizontal or vertical)
+*/
+/**************************************************************************/
+lcdOrientation_t lcdGetOrientation(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the width in pixels of the LCD screen (varies depending
+ on the current screen orientation)
+*/
+/**************************************************************************/
+uint16_t lcdGetWidth(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the height in pixels of the LCD screen (varies depending
+ on the current screen orientation)
+*/
+/**************************************************************************/
+uint16_t lcdGetHeight(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Scrolls the contents of the LCD screen vertically the
+ specified number of pixels using a HW optimised routine
+*/
+/**************************************************************************/
+void lcdScroll(int16_t pixels, uint16_t fillColor)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the controller's 16-bit (4 hexdigit) ID
+*/
+/**************************************************************************/
+uint16_t lcdGetControllerID(void)
+{
+}
+
+/**************************************************************************/
+/*!
+ @brief Returns the LCDs 'lcdProperties_t' that describes the LCDs
+ generic capabilities and dimensions
+*/
+/**************************************************************************/
+lcdProperties_t lcdGetProperties(void)
+{
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file lcd.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __LCD_H__
+#define __LCD_H__
+
+#include "projectconfig.h"
+#include "colors.h"
+
+// Any LCD needs to implement these common methods, which allow the low-level
+// initialisation and pixel-setting details to be abstracted away from the
+// higher level drawing and graphics code.
+
+typedef enum
+{
+ LCD_ORIENTATION_PORTRAIT = 0,
+ LCD_ORIENTATION_LANDSCAPE = 1
+} lcdOrientation_t;
+
+// This struct is used to indicate the capabilities of different LCDs
+typedef struct
+{
+ uint16_t width; // LCD width in pixels (default orientation)
+ uint16_t height; // LCD height in pixels (default orientation)
+ bool touchscreen; // Whether the LCD has a touch screen
+ bool orientation; // Whether the LCD orientation can be modified
+ bool hwscrolling; // Whether the LCD support HW scrolling
+} lcdProperties_t;
+
+extern void lcdInit(void);
+extern void lcdTest(void);
+extern uint16_t lcdGetPixel(uint16_t x, uint16_t y);
+extern void lcdFillRGB(uint16_t data);
+extern void lcdDrawPixel(uint16_t x, uint16_t y, uint16_t color);
+extern void lcdDrawPixels(uint16_t x, uint16_t y, uint16_t *data, uint32_t len);
+extern void lcdDrawHLine(uint16_t x0, uint16_t x1, uint16_t y, uint16_t color);
+extern void lcdDrawVLine(uint16_t x, uint16_t y0, uint16_t y1, uint16_t color);
+extern void lcdBacklight(bool state);
+extern void lcdScroll(int16_t pixels, uint16_t fillColor);
+extern uint16_t lcdGetWidth(void);
+extern uint16_t lcdGetHeight(void);
+extern void lcdSetOrientation(lcdOrientation_t orientation);
+extern uint16_t lcdGetControllerID(void);
+extern lcdOrientation_t lcdGetOrientation(void);
+extern lcdProperties_t lcdGetProperties(void);
+
+#endif
--- /dev/null
+TFT LCDs
+========
+
+The top level of this folder contains generic drawing routines for 16-bit TFT
+LCD displays. The core drawing functions are defined in drawing.c, and the
+specific HW implementation of these routines (setting the individual pixels,
+initialising the display, etc.) takes place in a seperate HW drivers that
+implements the methods defined in lcd.h. To change the LCD used, you simply
+need to change which HW-specific file is compiled and linked during the build
+process, without having to change anything else in your application code.
+
+For example:
+
+- main.c - drawing.c - hw\ili9325.c
+---------------- ---------------- ----------------
+ APPLICATION --> GENERIC DRAWING --> SPECIFIC HW
+ CODE --> CODE --> DRIVER
+---------------- ---------------- ----------------
+
+
+drawing.c Generic drawing routines such as drawing pixels, lines,
+ rectangles, as well as basic text-rendering.
+
+lcd.h This file contains the prototypes of HW-specific functions
+ that must be implemented in the LCD driver, since
+ drawing.c will redirect all requests to these lower level
+ functions.
+
+touchscreen.c Contains a very simple example of how to use ADC to read
+ the current position on a touchscreen. No signal debouncing
+ takes places, and this code will need to be improved for us
+ in a real-world situation.
+
+hw\* HW-specific drivers based on lcd.h
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file touchscreen.c
+ @author K. Townsend (microBuilder.eu)
+
+ Parts copyright (c) 2001, Carlos E. Vidales. All rights reserved.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "touchscreen.h"
+
+#include "core/adc/adc.h"
+#include "core/gpio/gpio.h"
+#include "core/systick/systick.h"
+#include "drivers/eeprom/eeprom.h"
+#include "drivers/lcd/tft/lcd.h"
+#include "drivers/lcd/tft/drawing.h"
+#include "drivers/lcd/tft/fonts/dejavusans9.h"
+
+#define TS_LINE1 "Touch the center of"
+#define TS_LINE2 "the red circle using"
+#define TS_LINE3 "a pen or stylus"
+
+static bool _tsInitialised = FALSE;
+static uint8_t _tsThreshhold = CFG_TFTLCD_TS_DEFAULTTHRESHOLD;
+tsPoint_t _tsLCDPoints[3];
+tsPoint_t _tsTSPoints[3];
+tsMatrix_t _tsMatrix;
+
+/**************************************************************************/
+/* */
+/* ----------------------- Private Methods ------------------------------ */
+/* */
+/**************************************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Reads the current Z/pressure level using the ADC
+*/
+/**************************************************************************/
+void tsReadZ(uint32_t* z1, uint32_t* z2)
+{
+ if (!_tsInitialised) tsInit();
+
+ // XP = ADC
+ // XM = GPIO Output Low
+ // YP = GPIO Output High
+ // YM = GPIO Input
+
+ TS_XM_FUNC_GPIO;
+ TS_YP_FUNC_GPIO;
+ TS_YM_FUNC_GPIO;
+
+ gpioSetDir (TS_XM_PORT, TS_XM_PIN, 1);
+ gpioSetDir (TS_YP_PORT, TS_YP_PIN, 1);
+ gpioSetDir (TS_YM_PORT, TS_YM_PIN, 0);
+
+ gpioSetValue(TS_XM_PORT, TS_XM_PIN, 0); // GND
+ gpioSetValue(TS_YP_PORT, TS_YP_PIN, 1); // 3.3V
+
+ TS_XP_FUNC_ADC;
+ *z1 = adcRead(TS_XP_ADC_CHANNEL);
+
+ // XP = GPIO Input
+ // XM = GPIO Output Low
+ // YP = GPIO Output High
+ // YM = ADC
+
+ TS_XP_FUNC_GPIO;
+ gpioSetDir (TS_YM_PORT, TS_YM_PIN, 0);
+
+ TS_YM_FUNC_ADC;
+ *z2 = adcRead(TS_YM_ADC_CHANNEL);
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the current X position using the ADC
+*/
+/**************************************************************************/
+uint32_t tsReadX(void)
+{
+ if (!_tsInitialised) tsInit();
+
+ // XP = GPIO Output High
+ // XM = GPIO Output Low
+ // YP = ADC
+ // YM = GPIO Input
+
+ TS_XP_FUNC_GPIO;
+ TS_XM_FUNC_GPIO;
+ TS_YM_FUNC_GPIO;
+
+ gpioSetDir (TS_XP_PORT, TS_XP_PIN, 1);
+ gpioSetDir (TS_XM_PORT, TS_XM_PIN, 1);
+ gpioSetDir (TS_YM_PORT, TS_YM_PIN, 0);
+
+ gpioSetValue(TS_XP_PORT, TS_XP_PIN, 1); // 3.3V
+ gpioSetValue(TS_XM_PORT, TS_XM_PIN, 0); // GND
+
+ TS_YP_FUNC_ADC;
+
+ // Return the ADC results
+ return adcRead(TS_YP_ADC_CHANNEL);
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the current Y position using the ADC
+*/
+/**************************************************************************/
+uint32_t tsReadY(void)
+{
+ if (!_tsInitialised) tsInit();
+
+ // YP = GPIO Output High
+ // YM = GPIO Output Low
+ // XP = GPIO Input
+ // XM = ADC
+
+ TS_YP_FUNC_GPIO;
+ TS_YM_FUNC_GPIO;
+ TS_XP_FUNC_GPIO;
+
+ gpioSetDir (TS_YP_PORT, TS_YP_PIN, 1);
+ gpioSetDir (TS_YM_PORT, TS_YM_PIN, 1);
+ gpioSetDir (TS_XP_PORT, TS_XP_PIN, 0);
+
+ gpioSetValue(TS_YP_PORT, TS_YP_PIN, 1); // 3.3V
+ gpioSetValue(TS_YM_PORT, TS_YM_PIN, 0); // GND
+
+ TS_XM_FUNC_ADC;
+
+ // Return the ADC results
+ return adcRead(TS_XM_ADC_CHANNEL);
+}
+
+/**************************************************************************/
+/*!
+ @brief Centers a line of text horizontally
+*/
+/**************************************************************************/
+void tsCalibCenterText(char* text, uint16_t y, uint16_t color)
+{
+ drawString((lcdGetWidth() - drawGetStringWidth(&dejaVuSans9ptFontInfo, text)) / 2, y, color, &dejaVuSans9ptFontInfo, text);
+}
+
+/**************************************************************************/
+/*!
+ @brief Renders the calibration screen with an appropriately
+ placed test point and waits for a touch event
+*/
+/**************************************************************************/
+tsTouchData_t tsRenderCalibrationScreen(uint16_t x, uint16_t y, uint16_t radius)
+{
+ drawFill(COLOR_WHITE);
+ tsCalibCenterText(TS_LINE1, 50, COLOR_GRAY_50);
+ tsCalibCenterText(TS_LINE2, 65, COLOR_GRAY_50);
+ tsCalibCenterText(TS_LINE3, 80, COLOR_GRAY_50);
+ drawCircle(x, y, radius, COLOR_RED);
+ drawCircle(x, y, radius + 2, COLOR_GRAY_128);
+
+ // Wait for a valid touch events
+ tsTouchData_t data;
+ tsTouchError_t error;
+ bool valid = false;
+ while (!valid)
+ {
+ error = tsRead(&data);
+ if (!error && data.valid)
+ {
+ valid = true;
+ }
+ }
+
+ return data;
+}
+
+/**************************************************************************/
+/*!
+ @brief Calculates the difference between the touch screen and the
+ actual screen co-ordinates, taking into account misalignment
+ and any physical offset of the touch screen.
+
+ @note This is based on the public domain touch screen calibration code
+ written by Carlos E. Vidales (copyright (c) 2001).
+
+ For more inforormation, see the following app notes:
+
+ - AN2173 - Touch Screen Control and Calibration
+ Svyatoslav Paliy, Cypress Microsystems
+ - Calibration in touch-screen systems
+ Wendy Fang and Tony Chang,
+ Analog Applications Journal, 3Q 2007 (Texas Instruments)
+*/
+/**************************************************************************/
+int setCalibrationMatrix( tsPoint_t * displayPtr, tsPoint_t * screenPtr, tsMatrix_t * matrixPtr)
+{
+ int retValue = 0;
+
+ matrixPtr->Divider = ((screenPtr[0].x - screenPtr[2].x) * (screenPtr[1].y - screenPtr[2].y)) -
+ ((screenPtr[1].x - screenPtr[2].x) * (screenPtr[0].y - screenPtr[2].y)) ;
+
+ if( matrixPtr->Divider == 0 )
+ {
+ retValue = -1 ;
+ }
+ else
+ {
+ matrixPtr->An = ((displayPtr[0].x - displayPtr[2].x) * (screenPtr[1].y - screenPtr[2].y)) -
+ ((displayPtr[1].x - displayPtr[2].x) * (screenPtr[0].y - screenPtr[2].y)) ;
+
+ matrixPtr->Bn = ((screenPtr[0].x - screenPtr[2].x) * (displayPtr[1].x - displayPtr[2].x)) -
+ ((displayPtr[0].x - displayPtr[2].x) * (screenPtr[1].x - screenPtr[2].x)) ;
+
+ matrixPtr->Cn = (screenPtr[2].x * displayPtr[1].x - screenPtr[1].x * displayPtr[2].x) * screenPtr[0].y +
+ (screenPtr[0].x * displayPtr[2].x - screenPtr[2].x * displayPtr[0].x) * screenPtr[1].y +
+ (screenPtr[1].x * displayPtr[0].x - screenPtr[0].x * displayPtr[1].x) * screenPtr[2].y ;
+
+ matrixPtr->Dn = ((displayPtr[0].y - displayPtr[2].y) * (screenPtr[1].y - screenPtr[2].y)) -
+ ((displayPtr[1].y - displayPtr[2].y) * (screenPtr[0].y - screenPtr[2].y)) ;
+
+ matrixPtr->En = ((screenPtr[0].x - screenPtr[2].x) * (displayPtr[1].y - displayPtr[2].y)) -
+ ((displayPtr[0].y - displayPtr[2].y) * (screenPtr[1].x - screenPtr[2].x)) ;
+
+ matrixPtr->Fn = (screenPtr[2].x * displayPtr[1].y - screenPtr[1].x * displayPtr[2].y) * screenPtr[0].y +
+ (screenPtr[0].x * displayPtr[2].y - screenPtr[2].x * displayPtr[0].y) * screenPtr[1].y +
+ (screenPtr[1].x * displayPtr[0].y - screenPtr[0].x * displayPtr[1].y) * screenPtr[2].y ;
+
+ // Persist data to EEPROM
+ eepromWriteS32(CFG_EEPROM_TOUCHSCREEN_CAL_AN, matrixPtr->An);
+ eepromWriteS32(CFG_EEPROM_TOUCHSCREEN_CAL_BN, matrixPtr->Bn);
+ eepromWriteS32(CFG_EEPROM_TOUCHSCREEN_CAL_CN, matrixPtr->Cn);
+ eepromWriteS32(CFG_EEPROM_TOUCHSCREEN_CAL_DN, matrixPtr->Dn);
+ eepromWriteS32(CFG_EEPROM_TOUCHSCREEN_CAL_EN, matrixPtr->En);
+ eepromWriteS32(CFG_EEPROM_TOUCHSCREEN_CAL_FN, matrixPtr->Fn);
+ eepromWriteS32(CFG_EEPROM_TOUCHSCREEN_CAL_FN, matrixPtr->Fn);
+ eepromWriteS32(CFG_EEPROM_TOUCHSCREEN_CAL_DIVIDER, matrixPtr->Divider);
+ eepromWriteU8(CFG_EEPROM_TOUCHSCREEN_CALIBRATED, 1);
+ }
+
+ return( retValue ) ;
+}
+
+/**************************************************************************/
+/*!
+ @brief Converts the supplied touch screen location (screenPtr) to
+ a pixel location on the display (displayPtr) using the
+ supplied matrix. The screen orientation is also taken into
+ account when converting the touch screen co-ordinate to
+ a pixel location on the LCD.
+
+ @note This is based on the public domain touch screen calibration code
+ written by Carlos E. Vidales (copyright (c) 2001).
+*/
+/**************************************************************************/
+int getDisplayPoint( tsPoint_t * displayPtr, tsPoint_t * screenPtr, tsMatrix_t * matrixPtr )
+{
+ int retValue = 0 ;
+
+ if( matrixPtr->Divider != 0 )
+ {
+ displayPtr->x = ( (matrixPtr->An * screenPtr->x) +
+ (matrixPtr->Bn * screenPtr->y) +
+ matrixPtr->Cn
+ ) / matrixPtr->Divider ;
+
+ displayPtr->y = ( (matrixPtr->Dn * screenPtr->x) +
+ (matrixPtr->En * screenPtr->y) +
+ matrixPtr->Fn
+ ) / matrixPtr->Divider ;
+ }
+ else
+ {
+ retValue = -1 ;
+ }
+
+ // Adjust value if the screen is in landscape mode
+ lcdOrientation_t orientation;
+ orientation = lcdGetOrientation();
+ if (orientation == LCD_ORIENTATION_LANDSCAPE)
+ {
+ uint32_t oldx, oldy;
+ oldx = displayPtr->x;
+ oldy = displayPtr->y;
+ displayPtr->x = oldy;
+ displayPtr->y = lcdGetHeight() - oldx;
+ }
+
+ return( retValue ) ;
+}
+
+/**************************************************************************/
+/* */
+/* ----------------------- Public Methods ------------------------------- */
+/* */
+/**************************************************************************/
+
+/**************************************************************************/
+/*!
+ @brief Initialises the appropriate GPIO pins and ADC for the
+ touchscreen
+*/
+/**************************************************************************/
+void tsInit(void)
+{
+ // Make sure that ADC is initialised
+ adcInit();
+
+ // Set initialisation flag
+ _tsInitialised = TRUE;
+ _tsThreshhold = tsGetThreshhold();
+
+ // Load values from EEPROM if touch screen has already been calibrated
+ if (eepromReadU8(CFG_EEPROM_TOUCHSCREEN_CALIBRATED) == 1)
+ {
+ // Load calibration data
+ _tsMatrix.An = eepromReadS32(CFG_EEPROM_TOUCHSCREEN_CAL_AN);
+ _tsMatrix.Bn = eepromReadS32(CFG_EEPROM_TOUCHSCREEN_CAL_BN);
+ _tsMatrix.Cn = eepromReadS32(CFG_EEPROM_TOUCHSCREEN_CAL_CN);
+ _tsMatrix.Dn = eepromReadS32(CFG_EEPROM_TOUCHSCREEN_CAL_DN);
+ _tsMatrix.En = eepromReadS32(CFG_EEPROM_TOUCHSCREEN_CAL_EN);
+ _tsMatrix.Fn = eepromReadS32(CFG_EEPROM_TOUCHSCREEN_CAL_FN);
+ _tsMatrix.Divider = eepromReadS32(CFG_EEPROM_TOUCHSCREEN_CAL_DIVIDER);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the current X, Y and Z co-ordinates of the touch screen
+*/
+/**************************************************************************/
+tsTouchError_t tsRead(tsTouchData_t* data)
+{
+ uint32_t x1, x2, y1, y2, z1, z2;
+
+ // Assign pressure levels regardless of touch state
+ tsReadZ(&z1, &z2);
+ data->z1 = z1;
+ data->z2 = z2;
+ data->xraw = 0;
+ data->yraw = 0;
+ data->xlcd = 0;
+ data->ylcd = 0;
+
+ // Abort if the screen is not being touched (0 levels reported)
+ if (z1 < _tsThreshhold)
+ {
+ data->valid = false;
+ return TS_ERROR_NONE;
+ }
+
+ // Get two X/Y readings and compare results
+ x1 = tsReadX();
+ x2 = tsReadX();
+ y1 = tsReadY();
+ y2 = tsReadY();
+
+ // Throw an error if both readings aren't identical
+ if (x1 != x2 || y1 != y2)
+ {
+ data->valid = false;
+ data->xraw = x1;
+ data->yraw = y1;
+ return TS_ERROR_XYMISMATCH;
+ }
+
+ // X/Y seems to be valid and reading has been confirmed twice
+ data->xraw = x1;
+ data->yraw = y1;
+
+ // Convert x/y values to pixel location with matrix multiply
+ tsPoint_t location, touch;
+ touch.x = x1;
+ touch.y = y1;
+ getDisplayPoint( &location, &touch, &_tsMatrix) ;
+ data->xlcd = location.x;
+ data->ylcd = location.y;
+ data->valid = true;
+
+ return TS_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Starts the screen calibration process. Each corner will be
+ tested, meaning that each boundary (top, left, right and
+ bottom) will be tested twice and the readings averaged.
+*/
+/**************************************************************************/
+void tsCalibrate(void)
+{
+ tsTouchData_t data;
+
+ /* --------------- Welcome Screen --------------- */
+ data = tsRenderCalibrationScreen(lcdGetWidth() / 2, lcdGetHeight() / 2, 5);
+ systickDelay(250);
+
+ /* ----------------- First Dot ------------------ */
+ // 10% over and 10% down
+ data = tsRenderCalibrationScreen(lcdGetWidth() / 10, lcdGetHeight() / 10, 5);
+ _tsLCDPoints[0].x = lcdGetWidth() / 10;
+ _tsLCDPoints[0].y = lcdGetHeight() / 10;
+ _tsTSPoints[0].x = data.xraw;
+ _tsTSPoints[0].y = data.yraw;
+ printf("Point 1 - LCD X:%04d Y:%04d TS X:%04d Y:%04d \r\n",
+ (int)_tsLCDPoints[0].x, (int)_tsLCDPoints[0].y, (int)_tsTSPoints[0].x, (int)_tsTSPoints[0].y);
+ systickDelay(250);
+
+ /* ---------------- Second Dot ------------------ */
+ // 50% over and 90% down
+ data = tsRenderCalibrationScreen(lcdGetWidth() / 2, lcdGetHeight() - lcdGetHeight() / 10, 5);
+ _tsLCDPoints[1].x = lcdGetWidth() / 2;
+ _tsLCDPoints[1].y = lcdGetHeight() - lcdGetHeight() / 10;
+ _tsTSPoints[1].x = data.xraw;
+ _tsTSPoints[1].y = data.yraw;
+ printf("Point 2 - LCD X:%04d Y:%04d TS X:%04d Y:%04d \r\n",
+ (int)_tsLCDPoints[1].x, (int)_tsLCDPoints[1].y, (int)_tsTSPoints[1].x, (int)_tsTSPoints[1].y);
+ systickDelay(250);
+
+ /* ---------------- Third Dot ------------------- */
+ // 90% over and 50% down
+ data = tsRenderCalibrationScreen(lcdGetWidth() - lcdGetWidth() / 10, lcdGetHeight() / 2, 5);
+ _tsLCDPoints[2].x = lcdGetWidth() - lcdGetWidth() / 10;
+ _tsLCDPoints[2].y = lcdGetHeight() / 2;
+ _tsTSPoints[2].x = data.xraw;
+ _tsTSPoints[2].y = data.yraw;
+ printf("Point 3 - LCD X:%04d Y:%04d TS X:%04d Y:%04d \r\n",
+ (int)_tsLCDPoints[2].x, (int)_tsLCDPoints[2].y, (int)_tsTSPoints[2].x, (int)_tsTSPoints[2].y);
+ systickDelay(250);
+
+ // Do matrix calculations for calibration and store to EEPROM
+ setCalibrationMatrix(&_tsLCDPoints[0], &_tsTSPoints[0], &_tsMatrix);
+}
+
+/**************************************************************************/
+/*!
+ @brief Causes a blocking delay until a valid touch event occurs
+
+ @note Thanks to 'rossum' and limor for this nifty little tidbit on
+ debouncing the signals via pressure sensitivity (using Z)
+
+ @section Example
+
+ @code
+ #include "drivers/lcd/tft/touchscreen.h"
+ ...
+ tsTouchData_t data;
+ tsTouchError_t error;
+
+ while (1)
+ {
+ // Cause a blocking delay until a touch event occurs or 5s passes
+ error = tsWaitForEvent(&data, 5000);
+
+ if (error)
+ {
+ switch(error)
+ {
+ case TS_ERROR_TIMEOUT:
+ printf("Timeout occurred %s", CFG_PRINTF_NEWLINE);
+ break;
+ default:
+ break;
+ }
+ }
+ else
+ {
+ // A valid touch event occurred ... display data
+ printf("Touch Event: X = %04u, Y = %04u %s",
+ data.xlcd,
+ data.ylcd,
+ CFG_PRINTF_NEWLINE);
+ }
+ }
+
+ @endcode
+*/
+/**************************************************************************/
+tsTouchError_t tsWaitForEvent(tsTouchData_t* data, uint32_t timeoutMS)
+{
+ if (!_tsInitialised) tsInit();
+
+ tsRead(data);
+
+ // Return the results right away if reading is valid
+ if (data->valid)
+ {
+ return TS_ERROR_NONE;
+ }
+
+ // Handle timeout if delay > 0 milliseconds
+ if (timeoutMS)
+ {
+ uint32_t startTick = systickGetTicks();
+ // Systick rollover may occur while waiting for timeout
+ if (startTick > 0xFFFFFFFF - timeoutMS)
+ {
+ while (data->valid == false)
+ {
+ // Throw alert if timeout delay has been passed
+ if ((systickGetTicks() < startTick) && (systickGetTicks() >= (timeoutMS - (0xFFFFFFFF - startTick))))
+ {
+ return TS_ERROR_TIMEOUT;
+ }
+ tsRead(data);
+ }
+ }
+ // No systick rollover will occur ... calculate timeout the simple way
+ else
+ {
+ // Wait in infinite loop
+ while (data->valid == false)
+ {
+ // Throw timeout if delay has been passed
+ if ((systickGetTicks() - startTick) > timeoutMS)
+ {
+ return TS_ERROR_TIMEOUT;
+ }
+ tsRead(data);
+ }
+ }
+ }
+ // No timeout requested ... wait forever
+ else
+ {
+ while (data->valid == false)
+ {
+ tsRead(data);
+ }
+ }
+
+ // Indicate correct reading
+ return TS_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Updates the touch screen threshhold level and saves it
+ to EEPROM
+*/
+/**************************************************************************/
+int tsSetThreshhold(uint8_t value)
+{
+ if ((value < 0) || (value > 254))
+ {
+ return -1;
+ }
+
+ // Update threshhold value
+ _tsThreshhold = value;
+
+ // Persist to EEPROM
+ eepromWriteU8(CFG_EEPROM_TOUCHSCREEN_THRESHHOLD, value);
+
+ return 0;
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the current touch screen threshhold level from EEPROM
+ (if present) or returns the default value from projectconfig.h
+*/
+/**************************************************************************/
+uint8_t tsGetThreshhold(void)
+{
+ // Check if custom threshold has been set in eeprom
+ uint8_t thold = eepromReadU8(CFG_EEPROM_TOUCHSCREEN_THRESHHOLD);
+ if (thold != 0xFF)
+ {
+ // Use value from EEPROM
+ _tsThreshhold = thold;
+ }
+ else
+ {
+ // Use the default value from projectconfig.h
+ _tsThreshhold = CFG_TFTLCD_TS_DEFAULTTHRESHOLD;
+ }
+
+ return _tsThreshhold;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file touchscreen.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __TOUCHSCREEN_H__
+#define __TOUCHSCREEN_H__
+
+#include "projectconfig.h"
+
+#define TS_XP_PORT (1)
+#define TS_XP_PIN (0)
+#define TS_XP_FUNC_GPIO do {IOCON_JTAG_TMS_PIO1_0 &= ~(IOCON_JTAG_TMS_PIO1_0_FUNC_MASK | IOCON_JTAG_TMS_PIO1_0_ADMODE_MASK); IOCON_JTAG_TMS_PIO1_0 |= IOCON_JTAG_TMS_PIO1_0_FUNC_GPIO;} while (0)
+#define TS_XP_FUNC_ADC do {IOCON_JTAG_TMS_PIO1_0 &= ~(IOCON_JTAG_TMS_PIO1_0_FUNC_MASK | IOCON_JTAG_TMS_PIO1_0_ADMODE_MASK); IOCON_JTAG_TMS_PIO1_0 |= IOCON_JTAG_TMS_PIO1_0_FUNC_AD1;} while (0)
+
+#define TS_XM_PORT (1)
+#define TS_XM_PIN (1)
+#define TS_XM_FUNC_GPIO do {IOCON_JTAG_TDO_PIO1_1 &= ~(IOCON_JTAG_TDO_PIO1_1_FUNC_MASK | IOCON_JTAG_TDO_PIO1_1_ADMODE_MASK); IOCON_JTAG_TDO_PIO1_1 |= IOCON_JTAG_TDO_PIO1_1_FUNC_GPIO;} while (0)
+#define TS_XM_FUNC_ADC do {IOCON_JTAG_TDO_PIO1_1 &= ~(IOCON_JTAG_TDO_PIO1_1_FUNC_MASK | IOCON_JTAG_TDO_PIO1_1_ADMODE_MASK); IOCON_JTAG_TDO_PIO1_1 |= IOCON_JTAG_TDO_PIO1_1_FUNC_AD2;} while (0)
+
+#define TS_YP_PORT (0)
+#define TS_YP_PIN (11)
+#define TS_YP_FUNC_GPIO do {IOCON_JTAG_TDI_PIO0_11 &= ~(IOCON_JTAG_TDI_PIO0_11_FUNC_MASK | IOCON_JTAG_TDI_PIO0_11_ADMODE_MASK); IOCON_JTAG_TDI_PIO0_11 |= IOCON_JTAG_TDI_PIO0_11_FUNC_GPIO;} while (0)
+#define TS_YP_FUNC_ADC do {IOCON_JTAG_TDI_PIO0_11 &= ~(IOCON_JTAG_TDI_PIO0_11_FUNC_MASK | IOCON_JTAG_TDI_PIO0_11_ADMODE_MASK); IOCON_JTAG_TDI_PIO0_11 |= IOCON_JTAG_TDI_PIO0_11_FUNC_AD0;} while (0)
+
+#define TS_YM_PORT (1)
+#define TS_YM_PIN (2)
+#define TS_YM_FUNC_GPIO do {IOCON_JTAG_nTRST_PIO1_2 &= ~(IOCON_JTAG_nTRST_PIO1_2_FUNC_MASK | IOCON_JTAG_nTRST_PIO1_2_ADMODE_MASK); IOCON_JTAG_nTRST_PIO1_2 |= IOCON_JTAG_nTRST_PIO1_2_FUNC_GPIO;} while (0)
+#define TS_YM_FUNC_ADC do {IOCON_JTAG_nTRST_PIO1_2 &= ~(IOCON_JTAG_nTRST_PIO1_2_FUNC_MASK | IOCON_JTAG_nTRST_PIO1_2_ADMODE_MASK); IOCON_JTAG_nTRST_PIO1_2 |= IOCON_JTAG_nTRST_PIO1_2_FUNC_AD3;} while (0)
+
+#define TS_YP_ADC_CHANNEL (0) // ADC0.0
+#define TS_XP_ADC_CHANNEL (1) // ADC0.1
+#define TS_XM_ADC_CHANNEL (2) // ADC0.2
+#define TS_YM_ADC_CHANNEL (3) // ADC0.3
+
+typedef struct Point
+{
+ int32_t x;
+ int32_t y;
+} tsPoint_t;
+
+typedef struct Matrix
+{
+ int32_t An,
+ Bn,
+ Cn,
+ Dn,
+ En,
+ Fn,
+ Divider ;
+} tsMatrix_t;
+
+typedef struct
+{
+ uint32_t xraw; // Touch screen x
+ uint32_t yraw; // Touch screen Y
+ uint16_t xlcd; // LCD co-ordinate X
+ uint16_t ylcd; // LCD co-ordinate Y
+ uint32_t z1;
+ uint32_t z2;
+ bool valid; // Whether this is a valid reading or not
+} tsTouchData_t;
+
+typedef enum
+{
+ TS_ERROR_NONE = 0,
+ TS_ERROR_TIMEOUT = -1, // Timeout occured before a valid reading
+ TS_ERROR_XYMISMATCH = -2 // Unable to get a stable X/Y value
+} tsTouchError_t;
+
+// Method Prototypes
+void tsInit ( void );
+tsTouchError_t tsRead(tsTouchData_t* data);
+void tsCalibrate ( void );
+tsTouchError_t tsWaitForEvent(tsTouchData_t* data, uint32_t timeoutMS);
+int tsSetThreshhold(uint8_t value);
+uint8_t tsGetThreshhold(void);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file stepper.c
+ @author Based on original code by Tom Igoe
+ Modified by K. Townsend (microBuilder.eu)
+
+ @brief Simple bi-polar stepper motor controller, based on the
+ Arduino stepper library by Tom Igoe. Includes simple
+ position handling methods to keep track of the motor's
+ relative position and the spindle's current rotation.
+
+ @section Example
+
+ @code
+
+ #include "sysinit.h"
+ #include "core/systick/systick.h"
+ #include "drivers/motor/stepper/stepper.h"
+
+ ...
+
+ systemInit(); // Configure cpu and mandatory peripherals
+
+ stepperInit(200); // Initialise driver for 200-step motor
+ stepperSetSpeed(60); // Set speed to 60 rpm (1 revolution per second)
+
+ while (1)
+ {
+ stepperStep(400); // Move forward 400 steps
+ stepperStep(-200); // Move backward 200 steps
+ systickDelay(1000); // Wait one second
+
+ // Move 'home' after 10 loops (current position = 2000)
+ if (stepperGetPosition() == 2000)
+ {
+ stepperMoveHome(); // Move back to the starting position
+ systickDelay(1000); // Wait one second
+ }
+ }
+
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdlib.h>
+
+#include "stepper.h"
+#include "core/gpio/gpio.h"
+#include "core/timer32/timer32.h"
+
+static int64_t stepperPosition = 0; // The current position (in steps) relative to 'Home'
+static uint32_t stepperStepNumber = 0; // The current position (in steps) relative to 0°
+static uint32_t stepperStepsPerRotation = 0; // Number of steps in a full 360° rotation
+static uint32_t stepperStepDelay = 0; // Delay in CPU ticks between individual steps
+
+/**************************************************************************/
+/*!
+ Private - Cause the motor to step forward or backward one step
+*/
+/**************************************************************************/
+void stepMotor(uint32_t thisStep)
+{
+ switch (thisStep)
+ {
+ case 0: // 1010
+ gpioSetValue(STEPPER_IN1_PORT, STEPPER_IN1_PIN, 1);
+ gpioSetValue(STEPPER_IN2_PORT, STEPPER_IN2_PIN, 0);
+ gpioSetValue(STEPPER_IN3_PORT, STEPPER_IN3_PIN, 1);
+ gpioSetValue(STEPPER_IN4_PORT, STEPPER_IN4_PIN, 0);
+ break;
+ case 1: // 0110
+ gpioSetValue(STEPPER_IN1_PORT, STEPPER_IN1_PIN, 0);
+ gpioSetValue(STEPPER_IN2_PORT, STEPPER_IN2_PIN, 1);
+ gpioSetValue(STEPPER_IN3_PORT, STEPPER_IN3_PIN, 1);
+ gpioSetValue(STEPPER_IN4_PORT, STEPPER_IN4_PIN, 0);
+ break;
+ case 2: // 0101
+ gpioSetValue(STEPPER_IN1_PORT, STEPPER_IN1_PIN, 0);
+ gpioSetValue(STEPPER_IN2_PORT, STEPPER_IN2_PIN, 1);
+ gpioSetValue(STEPPER_IN3_PORT, STEPPER_IN3_PIN, 0);
+ gpioSetValue(STEPPER_IN4_PORT, STEPPER_IN4_PIN, 1);
+ break;
+ case 3: // 1001
+ gpioSetValue(STEPPER_IN1_PORT, STEPPER_IN1_PIN, 1);
+ gpioSetValue(STEPPER_IN2_PORT, STEPPER_IN2_PIN, 0);
+ gpioSetValue(STEPPER_IN3_PORT, STEPPER_IN3_PIN, 0);
+ gpioSetValue(STEPPER_IN4_PORT, STEPPER_IN4_PIN, 1);
+ break;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the GPIO pins and delay timer and sets any
+ default values.
+
+ @param[in] steps
+ The number of steps per rotation (typically 200 or 400)
+*/
+/**************************************************************************/
+void stepperInit(uint32_t steps)
+{
+ // Setup motor control pins
+ gpioSetDir(STEPPER_IN1_PORT, STEPPER_IN1_PIN, 1);
+ gpioSetDir(STEPPER_IN2_PORT, STEPPER_IN2_PIN, 1);
+ gpioSetDir(STEPPER_IN3_PORT, STEPPER_IN3_PIN, 1);
+ gpioSetDir(STEPPER_IN4_PORT, STEPPER_IN4_PIN, 1);
+
+ gpioSetValue(STEPPER_IN1_PORT, STEPPER_IN1_PIN, 0);
+ gpioSetValue(STEPPER_IN2_PORT, STEPPER_IN2_PIN, 0);
+ gpioSetValue(STEPPER_IN3_PORT, STEPPER_IN3_PIN, 0);
+ gpioSetValue(STEPPER_IN4_PORT, STEPPER_IN4_PIN, 0);
+
+ // Set the number of steps per rotation
+ stepperStepsPerRotation = steps;
+
+ // Set the default speed (2 rotations per second)
+ stepperSetSpeed(120);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the current position (in steps) relative to 'Home'.
+
+ @return The difference (in steps) of the motor's current position
+ from the original 'Home' position. Value can be negative or
+ positive depending on the direction of previous movements.
+*/
+/**************************************************************************/
+int64_t stepperGetPosition()
+{
+ return stepperPosition;
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the motor's current rotation (in steps) relative to
+ the spindle's 'Zero' position.
+
+ @return The current step (0 .. steps per rotation) on the motor's
+ spindle relative to 0°. Value is always positive.
+*/
+/**************************************************************************/
+uint32_t stepperGetRotation()
+{
+ return stepperStepNumber;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the motor's current position to 'Home', meaning that
+ any future movement will be relative to the current
+ position.
+*/
+/**************************************************************************/
+void stepperSetHome()
+{
+ stepperPosition = 0;
+}
+
+/**************************************************************************/
+/*!
+ @brief Moves the motor back to the original 'Home' position.
+*/
+/**************************************************************************/
+void stepperMoveHome()
+{
+ stepperStep(stepperPosition * -1);
+}
+
+/**************************************************************************/
+/*!
+ @brief Saves the spindle's current angle/position as 0°. Each
+ step the spindle takes will now be relative to the spindle's
+ current position.
+*/
+/**************************************************************************/
+void stepperSetZero()
+{
+ stepperStepNumber = 0;
+}
+
+/**************************************************************************/
+/*!
+ @brief Moves the motor to its original rotation value. For example,
+ if a 200-step motor is currently rotated to step 137, it
+ will move the motor forward 63 steps to end at step 0 or 0°.
+*/
+/**************************************************************************/
+void stepperMoveZero()
+{
+ if (!stepperStepNumber)
+ {
+ stepperStep(stepperStepsPerRotation - stepperStepNumber);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the motor speed in rpm, meaning the number of times the
+ motor will fully rotate in a one minute period.
+
+ @param[in] rpm
+ Motor speed in revolutions per minute (RPM)
+
+ @warning Not all motors will function at all speeds, and some trial
+ and error may be required to find an appropriate speed for
+ the motor.
+*/
+/**************************************************************************/
+void stepperSetSpeed(uint32_t rpm)
+{
+ uint32_t ticksOneRPM = ((CFG_CPU_CCLK/SCB_SYSAHBCLKDIV) / stepperStepsPerRotation) * 60;
+
+ // Set stepper RPM
+ stepperStepDelay = ticksOneRPM / rpm;
+
+ // Initialise 32-bit timer 0 with the appropriate delay
+ timer32Init(0, stepperStepDelay);
+ timer32Enable(0);
+}
+
+/**************************************************************************/
+/*!
+ @brief Moves the motor forward or backward the specified number
+ of steps. A positive number moves the motor forward,
+ while a negative number moves the motor backwards.
+
+ @param[in] steps
+ The number of steps to move foreward (positive) or
+ backward (negative)
+*/
+/**************************************************************************/
+void stepperStep(int32_t steps)
+{
+ uint32_t stepsLeft = abs(steps); // Force number to be positive
+
+ while (stepsLeft > 0)
+ {
+ // Wait 1 tick between individual steps
+ timer32Delay(0, 1);
+
+ // Increment or decrement step counters (depending on direction)
+ if (steps > 0)
+ {
+ stepperPosition++; // Increment global position counter
+ stepperStepNumber++; // Increment single rotation counter
+ if (stepperStepNumber == stepperStepsPerRotation)
+ {
+ stepperStepNumber = 0;
+ }
+ }
+ else
+ {
+ stepperPosition--; // Decrement global position counter
+ if (stepperStepNumber == 0)
+ {
+ stepperStepNumber = stepperStepsPerRotation;
+ }
+ stepperStepNumber--; // Decrement single rotation counter
+ }
+
+ // Decrement number of remaining steps
+ stepsLeft--;
+
+ // Step the motor one step
+ stepMotor(stepperStepNumber % 4);
+ }
+}
+
+
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file stepper.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _STEPPER_H_
+#define _STEPPER_H_
+
+#include "projectconfig.h"
+
+#define STEPPER_IN1_PORT (3)
+#define STEPPER_IN1_PIN (0)
+#define STEPPER_IN2_PORT (3)
+#define STEPPER_IN2_PIN (1)
+#define STEPPER_IN3_PORT (3)
+#define STEPPER_IN3_PIN (2)
+#define STEPPER_IN4_PORT (3)
+#define STEPPER_IN4_PIN (3)
+
+void stepperInit( uint32_t steps );
+void stepperSetSpeed( uint32_t rpm );
+int64_t stepperGetPosition();
+uint32_t stepperGetRotation();
+void stepperMoveHome();
+void stepperSetHome();
+void stepperMoveZero();
+void stepperSetZero();
+void stepperStep( int32_t steps );
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file rsa.c
+ @author Kyle Loudon
+ modified: microBuilder.eu
+ @date 4 January, 2010
+ @version 1.0
+
+ Basic RSA-encryption using 64-bit math (32-bit keys).
+
+ Based on the examples from "Mastering Algorithms with C" by
+ Kyle Loudon (O'Reilly, 1999).
+
+ For details on how to generate a valid RSA key pair, see:
+ http://www.microbuilder.eu/Tutorials/SoftwareDevelopment/RSAEncryption.aspx
+
+ @warning Most versions of libc used for embedded systems do not
+ include support for 64-bit integers with printf, etc. (to
+ keep the compiled code size and memory usage as small as
+ possible). Unless you have explicitly added long long
+ support for printf, you should not try to display 64-bit
+ values with it (%lld, etc.). Using 32-bit values (changing
+ the definition of huge_t to uint32_t) will avoid this issue
+ entirely, though at the expense of weaker encryption.
+*/
+/**************************************************************************/
+
+#include "rsa.h"
+
+huge_t modexp(huge_t a, huge_t b, huge_t n)
+{
+ huge_t y;
+ y = 1;
+
+ /* Compute pow(a, b) % n using the binary square and multiply method. */
+ while (b != 0)
+ {
+ /* For each 1 in b, accumulate y. */
+ if (b & 1)
+ {
+ y = (y * a) % n;
+ }
+
+ /* Square a for each bit in b. */
+ a = (a * a) % n;
+
+ /* Prepare for the next bit in b. */
+ b = b >> 1;
+ }
+
+ return y;
+}
+
+void rsaTest()
+{
+ huge_t rsaOrig, rsaDecrypted, rsaEncrypted;
+ rsaPubKey_t publicKey;
+ rsaPriKey_t privateKey;
+ int i;
+
+ printf("Encrypting with RSA %s", CFG_PRINTF_NEWLINE);
+
+ #if CFG_RSA_BITS == 64
+ // Values based on 64-bit math (huge_t = uint64_t)
+ // which will result in more secure encryption, but also
+ // increases the size of the encrypted text
+ publicKey.e = 21;
+ publicKey.n = 16484947;
+ privateKey.d = 15689981;
+ privateKey.n = 16484947;
+ #endif
+
+ #if CFG_RSA_BITS == 32
+ // Alternative values with 32-bit math (huge_t = uint32_t)
+ // or when smaller encrypted text is desired
+ publicKey.e = 17;
+ publicKey.n = 209;
+ privateKey.d = 53;
+ privateKey.n = 209;
+ #endif
+
+ #if CFG_RSA_BITS == 64
+ printf("Starting RSA encryption/decryption test %s", CFG_PRINTF_NEWLINE);
+ #endif
+ #if CFG_RSA_BITS == 32
+ printf("d=%u, e=%u, n=%u %s", (unsigned int)privateKey.d, (unsigned int)publicKey.e, (unsigned int)publicKey.n, CFG_PRINTF_NEWLINE);
+ #endif
+
+ for (i = 0; i < 128; i++)
+ {
+ rsaOrig = i;
+ rsaEncrypt(rsaOrig, &rsaEncrypted, publicKey);
+ rsaDecrypt(rsaEncrypted, &rsaDecrypted, privateKey);
+
+ if (rsaOrig == rsaDecrypted)
+ {
+ #if CFG_RSA_BITS == 64
+ printf("Encrypted and decrypted %d %s", i, CFG_PRINTF_NEWLINE);
+ #endif
+ #if CFG_RSA_BITS == 32
+ printf("In=%5u, Encrypted=%5u, Out=%5u (OK) %s", (unsigned int)rsaOrig, (unsigned int)rsaEncrypted, (unsigned int)rsaDecrypted, CFG_PRINTF_NEWLINE);
+ #endif
+ }
+ else
+ {
+ #if CFG_RSA_BITS == 64
+ printf("Failed to decrypt %d %s", i, CFG_PRINTF_NEWLINE);
+ #endif
+ #if CFG_RSA_BITS == 32
+ printf("In=%5u, Encrypted=%5u, Out=%5u (ERROR) %s", (unsigned int)rsaOrig, (unsigned int)rsaEncrypted, (unsigned int)rsaDecrypted, CFG_PRINTF_NEWLINE);
+ #endif
+ }
+ }
+}
+
+void rsaEncrypt(huge_t plaintext, huge_t *ciphertext, rsaPubKey_t pubkey)
+{
+ *ciphertext = modexp(plaintext, pubkey.e, pubkey.n);
+
+ return;
+}
+
+void rsaDecrypt(huge_t ciphertext, huge_t *plaintext, rsaPriKey_t prikey)
+{
+ *plaintext = modexp(ciphertext, prikey.d, prikey.n);
+
+ return;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file rsa.h
+ @author Kyle Loudon
+ modified: microBuilder.eu
+ @date 4 January, 2010
+ @version 1.0
+
+ Basic RSA-encryption using 64-bit math (32-bit keys).
+
+ Based on the examples from "Mastering Algorithms with C" by
+ Kyle Loudon (O'Reilly, 1999).
+*/
+/**************************************************************************/
+
+#ifndef _RSA_H_
+#define _RSA_H_
+
+#include "projectconfig.h"
+
+/* In a secure implementation, huge_t should be at least 400 decimal digits, *
+ * instead of the 20 provided by a 64-bit value. This means that key values *
+ * can be no longer than 10 digits in length in the current implementation. */
+#if CFG_RSA_BITS == 64
+ typedef uint64_t huge_t;
+#endif
+#if CFG_RSA_BITS == 32
+ typedef uint32_t huge_t;
+#endif
+
+/* Structure for RSA public keys. */
+typedef struct rsaPubKey_s
+{
+ huge_t e;
+ huge_t n;
+}
+rsaPubKey_t;
+
+/* Define a structure for RSA private keys. */
+typedef struct rsaPriKey_s
+{
+ huge_t d;
+ huge_t n;
+}
+rsaPriKey_t;
+
+void rsaTest();
+void rsaEncrypt(huge_t plaintext, huge_t *ciphertext, rsaPubKey_t pubkey);
+void rsaDecrypt(huge_t ciphertext, huge_t *plaintext, rsaPriKey_t prikey);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file analogjoystick.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section DESCRIPTION
+
+ Driver for a simple four-way analog joystick.
+
+ @section Example
+
+ @code
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "analogjoystick.h"
+#include "core/adc/adc.h"
+#include "core/gpio/gpio.h"
+
+static bool _joystickInitialised = false;
+
+/**************************************************************************/
+/*!
+ @brief Initialises the analog joystick, setting the appropriate
+ pins to analog and digital input.
+*/
+/**************************************************************************/
+void joystickInit(void)
+{
+ // Make sure SEL is set to GPIO and input
+ JOYSTICK_SEL_FUNC_GPIO;
+ gpioSetDir (JOYSTICK_SEL_PORT, JOYSTICK_SEL_PIN, 0);
+
+ // Make sure that ADC is initialised
+ adcInit();
+
+ // Set HORIZ/VERT pins to ADC
+ JOYSTICK_VERT_FUNC_ADC;
+ JOYSTICK_HORIZ_FUNC_ADC;
+
+ _joystickInitialised = true;
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the raw ADC values for the horizontal and vertical
+ axis, as well as the current state of the select button.
+
+ @param[out] horizontal
+ pointer to the uint32_t variable that will hold the
+ results of the horizontal analog conversion
+ @param[out] vertical
+ pointer to the uint32_t variable that will hold the
+ results of the vertical analog conversion
+ @param[out] select
+ pointer to the bool variable that will hold the
+ current state of the digital select button
+*/
+/**************************************************************************/
+void joystickGetValues(uint32_t *horizontal, uint32_t *vertical, bool *select)
+{
+ if (!_joystickInitialised) joystickInit();
+
+ // Get current ADC values
+ *horizontal = adcRead(JOYSTICK_HORIZ_ADCPORT);
+ *vertical = adcRead(JOYSTICK_VERT_ADCPORT);
+ *select = gpioGetValue(JOYSTICK_SEL_PORT, JOYSTICK_SEL_PIN);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the rough direction that the joystick is currently
+ positioned at
+
+ @param[out] direction
+ The joystick_direction_t (enum) that will be used to
+ identify the joysticks approximate current direction.
+*/
+/**************************************************************************/
+void joystickGetDirection(joystick_direction_t *direction)
+{
+ if (!_joystickInitialised) joystickInit();
+
+ uint32_t hor, ver;
+ bool sel;
+
+ // Get current joystick position
+ joystickGetValues(&hor, &ver, &sel);
+
+ // ToDo: Process values
+ direction = JOYSTICK_DIR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Get the approximate rotation of the joystick from 0-359° in
+ a clock-wise direction.
+
+ @param[out] rotation
+ Pointer to the uint32_t variable that will hold the
+ rotation value.
+*/
+/**************************************************************************/
+void joystickGetRotation(uint32_t *rotation)
+{
+ if (!_joystickInitialised) joystickInit();
+
+ // ToDo
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file analogjoystick.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _ANALOGJOYSTICK_H_
+#define _ANALOGJOYSTICK_H_
+
+#include "projectconfig.h"
+
+#define JOYSTICK_VERT_ADCPORT (2) // ADC2
+#define JOYSTICK_HORIZ_ADCPORT (3) // ADC3
+#define JOYSTICK_SEL_PORT (0) // Use UART CTS for SEL input (P0.7)
+#define JOYSTICK_SEL_PIN (7)
+
+#define JOYSTICK_SEL_FUNC_GPIO do {IOCON_PIO0_7 &= ~IOCON_PIO0_7_FUNC_MASK; IOCON_PIO0_7 |= IOCON_PIO0_7_FUNC_GPIO;} while (0)
+#define JOYSTICK_VERT_FUNC_ADC do {IOCON_JTAG_TMS_PIO1_0 &= ~IOCON_JTAG_TMS_PIO1_0_FUNC_MASK; IOCON_JTAG_TMS_PIO1_0 |= IOCON_JTAG_TMS_PIO1_0_FUNC_AD1;} while (0)
+#define JOYSTICK_HORIZ_FUNC_ADC do {IOCON_JTAG_nTRST_PIO1_2 &= ~IOCON_JTAG_nTRST_PIO1_2_FUNC_MASK; IOCON_JTAG_nTRST_PIO1_2 |= IOCON_JTAG_nTRST_PIO1_2_FUNC_AD3;} while (0)
+
+typedef enum
+{
+ JOYSTICK_DIR_NONE = 0,
+ JOYSTICK_DIR_NORTH = 1,
+ JOYSTICK_DIR_NORTHEAST = 2,
+ JOYSTICK_DIR_EAST = 3,
+ JOYSTICK_DIR_SOUTHEAST = 4,
+ JOYSTICK_DIR_SOUTH = 5,
+ JOYSTICK_DIR_SOUTHWEST = 6,
+ JOYSTICK_DIR_WEST = 7,
+ JOYSTICK_DIR_NORTHWEST = 8
+} joystick_direction_t;
+
+void joystickInit(void);
+void joystickGetValues(uint32_t *horizontal, uint32_t *vertical, bool *select);
+void joystickGetDirection(joystick_direction_t *direction);
+void joystickGetRotation(uint32_t *rotation);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file lm75b.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ Driver for NXP's LM75B I2C temperature sensor. This temperature
+ sensor has an accuracy of 0.125°C, and returns a temperature value
+ in degrees celsius where each unit is equal to 0.125°C. For example,
+ if the temperature reading is 198, it means that the temperature in
+ degree celsius is: 198 / 8 = 24.75°C.
+
+ @section Example
+
+ @code
+ #include "core/cpu/cpu.h"
+ #include "drivers/sensors/lm75b/lm75b.h"
+
+ int main(void)
+ {
+ cpuInit();
+
+ int32_t temp = 0;
+
+ // Initialise the LM75B
+ lm75bInit();
+
+ while (1)
+ {
+ // Get the current temperature (in 0.125°C units)
+ lm75bGetTemperature(&temp);
+
+ // Multiply value by 125 for fixed-point math (0.125°C per unit)
+ temp *= 125;
+
+ // Use modulus operator to display decimal value
+ printf("Current Temperature: %d.%d C\n", temp / 1000, temp % 1000);
+
+ // Alternatively, you could also use floating point math, though
+ // this will result in larger compiled code if you add in floating
+ // point support for printf, etc.
+ //
+ // float tempFloat = 0.0F;
+ // lm75bGetTemperature(&temp);
+ // tempFloat = (float)temp / 8.0F;
+ }
+ }
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include "lm75b.h"
+
+extern volatile uint8_t I2CMasterBuffer[I2C_BUFSIZE];
+extern volatile uint8_t I2CSlaveBuffer[I2C_BUFSIZE];
+extern volatile uint32_t I2CReadLength, I2CWriteLength;
+
+uint32_t i;
+
+static bool _lm75bInitialised = false;
+
+/**************************************************************************/
+/*!
+ @brief Writes an 8 bit values over I2C
+*/
+/**************************************************************************/
+lm75bError_e lm75bWrite8 (uint8_t reg, uint32_t value)
+{
+ // Clear write buffers
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 3;
+ I2CReadLength = 0;
+ I2CMasterBuffer[0] = LM75B_ADDRESS; // I2C device address
+ I2CMasterBuffer[1] = reg; // Command register
+ I2CMasterBuffer[2] = (value & 0xFF); // Value to write
+ i2cEngine();
+ return LM75B_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a 16 bit values over I2C
+*/
+/**************************************************************************/
+lm75bError_e lm75bRead16(uint8_t reg, int32_t *value)
+{
+ // Clear write buffers
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 2;
+ I2CReadLength = 2;
+ I2CMasterBuffer[0] = LM75B_ADDRESS; // I2C device address
+ I2CMasterBuffer[1] = reg; // Command register
+ // Append address w/read bit
+ I2CMasterBuffer[2] = LM75B_ADDRESS | LM75B_READBIT;
+ i2cEngine();
+
+ // Shift values to create properly formed integer
+ *value = ((I2CSlaveBuffer[0] << 8) | I2CSlaveBuffer[1]) >> 5;
+
+ // Sign extend negative numbers
+ if (I2CSlaveBuffer[0] & 0x80)
+ {
+ // Negative number
+ *value |= 0xFFFFFC00;
+ }
+ return LM75B_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the I2C block
+*/
+/**************************************************************************/
+lm75bError_e lm75bInit(void)
+{
+ // Initialise I2C
+ if (i2cInit(I2CMASTER) == false)
+ {
+ return LM75B_ERROR_I2CINIT; /* Fatal error */
+ }
+
+ _lm75bInitialised = true;
+
+ return LM75B_ERROR_OK;
+
+ // Set device to shutdown mode by default (saves power)
+ return lm75bConfigWrite (LM75B_CONFIG_SHUTDOWN_SHUTDOWN);
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the current temperature from the LM75B
+
+ @note This method will assign a signed 32-bit value (int32) to 'temp',
+ where each unit represents +/- 0.125°C. To convert the numeric
+ value to degrees celsius, you must divide the value of 'temp'
+ by 8. This conversion is not done automatically, since you may
+ or may not want to use floating point math for the calculations.
+*/
+/**************************************************************************/
+lm75bError_e lm75bGetTemperature (int32_t *temp)
+{
+ if (!_lm75bInitialised) lm75bInit();
+
+ // Turn device on
+ lm75bConfigWrite (LM75B_CONFIG_SHUTDOWN_POWERON);
+
+ // Read temperature
+ lm75bError_e error = LM75B_ERROR_OK;
+ error = lm75bRead16 (LM75B_REGISTER_TEMPERATURE, temp);
+
+ // Shut device back down
+ lm75bConfigWrite (LM75B_CONFIG_SHUTDOWN_SHUTDOWN);
+
+ return error;
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes the supplied 8-bit value to the LM75B config register
+*/
+/**************************************************************************/
+lm75bError_e lm75bConfigWrite (uint8_t configValue)
+{
+ if (!_lm75bInitialised) lm75bInit();
+
+ return lm75bWrite8 (LM75B_REGISTER_CONFIGURATION, configValue);
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file lm75b.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _LM75B_H_
+#define _LM75B_H_
+
+#include "projectconfig.h"
+#include "core/i2c/i2c.h"
+
+#define LM75B_ADDRESS (0x90) // 100 1000 shifted left 1 bit = 0x90
+#define LM75B_READBIT (0x01)
+
+#define LM75B_REGISTER_TEMPERATURE (0x00)
+#define LM75B_REGISTER_CONFIGURATION (0x01)
+
+#define LM75B_CONFIG_SHUTDOWN_MASK (0x01)
+#define LM75B_CONFIG_SHUTDOWN_POWERON (0x00)
+#define LM75B_CONFIG_SHUTDOWN_SHUTDOWN (0x01)
+
+typedef enum
+{
+ LM75B_ERROR_OK = 0, // Everything executed normally
+ LM75B_ERROR_I2CINIT, // Unable to initialise I2C
+ LM75B_ERROR_I2CBUSY, // I2C already in use
+ LM75B_ERROR_LAST
+}
+lm75bError_e;
+
+lm75bError_e lm75bInit(void);
+lm75bError_e lm75bGetTemperature (int32_t *temp);
+lm75bError_e lm75bConfigWrite (uint8_t configValue);
+
+#endif
+
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pn532.c
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "pn532.h"
+#include "pn532_drvr.h"
+#include "core/systick/systick.h"
+#include "core/uart/uart.h"
+
+static pn532_pcb_t pcb;
+
+/**************************************************************************/
+/*!
+ @brief Prints a hexadecimal value in plain characters
+
+ @param pbtData Pointer to the byte data
+ @param szBytes Data length in bytes
+*/
+/**************************************************************************/
+void pn532PrintHex(const byte_t * pbtData, const size_t szBytes)
+{
+ size_t szPos;
+ for (szPos=0; szPos < szBytes; szPos++)
+ {
+ PN532_DEBUG("%02x ", pbtData[szPos]);
+ }
+ PN532_DEBUG(CFG_PRINTF_NEWLINE);
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets a reference to the PN532 peripheral control block,
+ which can be used to determine that state of the PN532
+ IC, buffers, etc.
+*/
+/**************************************************************************/
+pn532_pcb_t * pn532GetPCB()
+{
+ return &pcb;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the appropriate serial bus (UART, etc.),and
+ sets up any buffers or peripherals required by the PN532.
+*/
+/**************************************************************************/
+void pn532Init(void)
+{
+ // Clear protocol control blocks
+ memset(&pcb, 0, sizeof(pn532_pcb_t));
+
+ // Initialise the underlying HW
+ pn532HWInit();
+
+ // Set the PCB flags to an appropriate state
+ pcb.initialised = TRUE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Configures the PN532 for a specific modulation and
+ baud rate
+*/
+/**************************************************************************/
+pn532_error_t pn532Configure(pn532_modulation_t mod)
+{
+ // ToDo
+
+ return PN532_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the response buffer from the PN532
+
+ @param abtCommand
+ The byte array containg the command and any
+ optional paramaters
+ @param szLen
+ The number of bytes in abtCommand
+*/
+/**************************************************************************/
+pn532_error_t pn532Read(byte_t * abtResponse, size_t * pszLen)
+{
+ if (!pcb.initialised) pn532Init();
+
+ // Try to wake the device up if it's in sleep mode
+ if (pcb.state == PN532_STATE_SLEEP)
+ {
+ pn532_error_t wakeupError = pn532Wakeup();
+ if (wakeupError)
+ {
+ return wakeupError;
+ }
+ }
+
+ // Read the response if the device is in an appropriate state
+ if (pcb.state == PN532_STATE_READY)
+ {
+ return pn532ReadResponse(abtResponse, pszLen);
+ }
+ else
+ {
+ PN532_DEBUG("Init Failed%s", CFG_PRINTF_NEWLINE);
+ return PN532_ERROR_UNABLETOINIT;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends a byte array of command and parameter data to the
+ PN532, starting with the command byte. The frame's
+ preamble, checksums, postamble and frame identifier (0xD4)
+ will all be automatically added.
+
+ @param abtCommand
+ The byte array containg the command and any
+ optional paramaters
+ @param szLen
+ The number of bytes in abtCommand
+*/
+/**************************************************************************/
+pn532_error_t pn532Write(byte_t * abtCommand, size_t szLen)
+{
+ if (!pcb.initialised) pn532Init();
+
+ // Try to wake the device up if it's in sleep mode
+ if (pcb.state == PN532_STATE_SLEEP)
+ {
+ pn532_error_t wakeupError = pn532Wakeup();
+ if (wakeupError)
+ {
+ return wakeupError;
+ }
+ }
+
+ // Send the command if the device is in an appropriate state
+ if (pcb.state == PN532_STATE_READY)
+ {
+ return pn532SendCommand(abtCommand, szLen);
+ }
+ else
+ {
+ PN532_DEBUG("Init Failed%s", CFG_PRINTF_NEWLINE);
+ return PN532_ERROR_UNABLETOINIT;
+ }
+}
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pn532.h
+*/
+/**************************************************************************/
+
+#ifndef __PN532_H__
+#define __PN532_H__
+
+#include "projectconfig.h"
+
+#define PN532_DEBUG(fmt, args...) printf(fmt, ##args)
+
+typedef enum pn532_state_e
+{
+ PN532_STATE_SLEEP,
+ PN532_STATE_READY,
+ PN532_STATE_BUSY
+}
+pn532_state_t;
+
+/* Error messages generate by the stack (not to be confused with app level errors from the PN532) */
+typedef enum pn532_error_e
+{
+ PN532_ERROR_NONE = 0x00,
+ PN532_ERROR_UNABLETOINIT = 0x01, // Unable to initialise or wakeup the device
+ PN532_ERROR_APPLEVELERROR = 0x02, // Application level error detected
+ PN532_ERROR_BUSY = 0x03, // Busy executing a previous command
+ PN532_ERROR_NOACK = 0x04, // No ack message received
+ PN532_ERROR_INVALIDACK = 0x05, // Ack != 00 00 FF 00 FF 00
+ PN532_ERROR_PREAMBLEMISMATCH = 0x06, // Frame preamble + start code mismatch
+ PN532_ERROR_EXTENDEDFRAME = 0x07, // Extended frames currently unsupported
+ PN532_ERROR_LENCHECKSUMMISMATCH = 0x08,
+ PN532_ERROR_RESPONSEBUFFEREMPTY = 0x09, // No response data received
+ PN532_ERROR_SPIREADYSTATUSTIMEOUT = 0x0A // Timeout waiting for 'ready' status (SPI only)
+
+} pn532_error_t;
+
+typedef enum pn532_modulation_e
+{
+ PN532_MODULATION_ISO14443A_106KBPS = 0x00,
+ PN532_MODULATION_FELICA_212KBPS = 0x01,
+ PN532_MODULATION_FELICA_424KBPS = 0x02,
+ PN532_MODULATION_ISO14443B_106KBPS = 0x03,
+ PN532_MODULATION_JEWEL_106KBPS = 0x04
+} pn532_modulation_t;
+
+/* PN532 Protocol control block */
+typedef struct
+{
+ BOOL initialised;
+ pn532_state_t state;
+ pn532_modulation_t modulation;
+ uint32_t lastCommand;
+ uint32_t appError;
+} pn532_pcb_t;
+
+void pn532Init();
+pn532_pcb_t * pn532GetPCB();
+pn532_error_t pn532SetModulation(pn532_modulation_t mod);
+pn532_error_t pn532Write(byte_t *abtCommand, size_t szLen);
+pn532_error_t pn532Read(byte_t *abtResponse, size_t * pszLen);
+void pn532PrintHex(const byte_t * pbtData, const size_t szBytes);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pn532_drvr.h
+*/
+/**************************************************************************/
+
+#ifndef __PN532_DRV_H__
+#define __PN532_DRV_H__
+
+#include "projectconfig.h"
+#include "pn532.h"
+
+#define PN532_UART
+// #define PN532_SPI
+
+#define PN532_DEBUG(fmt, args...) printf(fmt, ##args)
+
+#define PN532_RSTPD_PORT (2)
+#define PN532_RSTPD_PIN (2)
+#define PN532_SPI_CSPORT (0)
+#define PN532_SPI_CSPIN (2)
+
+#define PN532_NORMAL_FRAME__DATA_MAX_LEN (254)
+#define PN532_NORMAL_FRAME__OVERHEAD (8)
+#define PN532_EXTENDED_FRAME__DATA_MAX_LEN (264)
+#define PN532_EXTENDED_FRAME__OVERHEAD (11)
+#define PN532_BUFFER_LEN (PN532_EXTENDED_FRAME__DATA_MAX_LEN + PN532_EXTENDED_FRAME__OVERHEAD)
+#define PN532_UART_BAUDRATE (115200)
+
+enum
+{
+ PN532_COMMAND_DIAGNOSE = 0x00,
+ PN532_COMMAND_GETFIRMWAREVERSION = 0x02,
+ PN532_COMMAND_GETGENERALSTATUS = 0x04,
+ PN532_COMMAND_READREGISTER = 0x06,
+ PN532_COMMAND_WRITEREGISTER = 0x08,
+ PN532_COMMAND_READGPIO = 0x0C,
+ PN532_COMMAND_WRITEGPIO = 0x0E,
+ PN532_COMMAND_SETSERIALBAUDRATE = 0x10,
+ PN532_COMMAND_SETPARAMETERS = 0x12,
+ PN532_COMMAND_SAMCONFIGURATION = 0x14,
+ PN532_COMMAND_POWERDOWN = 0x16,
+ PN532_COMMAND_RFCONFIGURATION = 0x32,
+ PN532_COMMAND_RFREGULATIONTEST = 0x58,
+ PN532_COMMAND_INJUMPFORDEP = 0x56,
+ PN532_COMMAND_INJUMPFORPSL = 0x46,
+ PN532_COMMAND_INLISTPASSIVETARGET = 0x4A,
+ PN532_COMMAND_INATR = 0x50,
+ PN532_COMMAND_INPSL = 0x4E,
+ PN532_COMMAND_INDATAEXCHANGE = 0x40,
+ PN532_COMMAND_INCOMMUNICATETHRU = 0x42,
+ PN532_COMMAND_INDESELECT = 0x44,
+ PN532_COMMAND_INRELEASE = 0x52,
+ PN532_COMMAND_INSELECT = 0x54,
+ PN532_COMMAND_INAUTOPOLL = 0x60,
+ PN532_COMMAND_TGINITASTARGET = 0x8C,
+ PN532_COMMAND_TGSETGENERALBYTES = 0x92,
+ PN532_COMMAND_TGGETDATA = 0x86,
+ PN532_COMMAND_TGSETDATA = 0x8E,
+ PN532_COMMAND_TGSETMETADATA = 0x94,
+ PN532_COMMAND_TGGETINITIATORCOMMAND = 0x88,
+ PN532_COMMAND_TGRESPONSETOINITIATOR = 0x90,
+ PN532_COMMAND_TGGETTARGETSTATUS = 0x8A
+};
+
+/* Application level errors generated by the PN532 chip */
+enum
+{
+ PN532_APPERROR_NONE = 0x00,
+ PN532_APPERROR_TIMEOUT = 0x01,
+ PN532_APPERROR_CRCERROR = 0x02,
+ PN532_APPERROR_PARITYERROR = 0x04,
+ PN532_APPERROR_FRAMINGERROR = 0x05,
+ PN532_APPERROR_BITCOLLISION = 0x06,
+ PN532_APPERROR_INSUFFICIENTBUFFER = 0x07,
+ PN532_APPERROR_RFBUFFEROVERFLOW = 0x09,
+ PN532_APPERROR_RFFIELDTIMEOUT = 0x0A,
+ PN532_APPERROR_RFPROTOCOLERROR = 0x0B,
+ PN532_APPERROR_TEMPERROR = 0x0D,
+ PN532_APPERROR_INTERNBUFFEROVERFLOW = 0x0E,
+ PN532_APPERROR_INVALIDPARAMETER = 0x10,
+ PN532_APPERROR_DEP_UNSUPPORTEDCMD = 0x12,
+ PN532_APPERROR_DEP_INVALIDOFORMAT = 0x13,
+ PN532_APPERROR_AUTHENTERR = 0x14,
+ PN532_APPERROR_UIDCCHECKERROR = 0x23,
+ PN532_APPERROR_DEP_INVALIDDEVSTATE = 0x25,
+ PN532_APPERROR_OPERATIONNOTALLOWED = 0x26,
+ PN532_APPERROR_CMDNOTACCEPTABLE = 0x27,
+ PN532_APPERROR_TARGETRELEASED = 0x29,
+ PN532_APPERROR_IDMISMATCH = 0x2A,
+ PN532_APPERROR_CARDDISAPPEARED = 0x2B,
+ PN532_APPERROR_NFCID3MISMATCH = 0x2C,
+ PN532_APPERROR_OVERCURRENTEVENT = 0x2D,
+ PN532_APPERROR_NADMISSINGINDEP = 0x2E
+};
+
+void pn532HWInit(void);
+pn532_error_t pn532BuildFrame(byte_t * pbtFrame, size_t * pszFrame, const byte_t * pbtData, const size_t szData);
+pn532_error_t pn532SendCommand(const byte_t * pbtData, const size_t szData);
+pn532_error_t pn532ReadResponse(byte_t * pbtResponse, size_t * pszRxLen);
+pn532_error_t pn532Wakeup(void);
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pn532_drvr_spi.c
+*/
+/**************************************************************************/
+#include "pn532_drvr.h"
+
+#ifdef PN532_SPI
+
+#include <string.h>
+#include "core/systick/systick.h"
+#include "core/gpio/gpio.h"
+#include "core/ssp/ssp.h"
+
+#define PN532_SELECT gpioSetValue(PN532_SPI_CSPORT, PN532_SPI_CSPIN, 0);
+#define PN532_DESELECT gpioSetValue(PN532_SPI_CSPORT, PN532_SPI_CSPIN, 1);
+
+#define PN532_SPI_STATREAD 0x02
+#define PN532_SPI_DATAWRITE 0x01
+#define PN532_SPI_DATAREAD 0x03
+#define PN532_SPI_READY 0x01
+
+// The number of attempts to make while waiting for the status ready bit
+// Each attempt is 1ms
+#define PN532_SPI_TIMEOUT 100
+
+/**************************************************************************/
+/*!
+ @brief Writes a single byte via SPI
+*/
+/**************************************************************************/
+uint8_t pn532SPIWrite(unsigned char data)
+{
+ // Note: bits have to be reversed since SPI is LSB on the PN532
+ // Thankfully the M3 has a quick HW reverse command (RBIT)
+ while ((SSP_SSP0SR & SSP_SSP0SR_TNF_NOTFULL) == 0);
+ SSP_SSP0DR = ((unsigned char)(RBIT(data)>>24)); // Write
+ while ((SSP_SSP0SR & SSP_SSP0SR_RNE_NOTEMPTY) == 0);
+ data = ((unsigned char)(RBIT(SSP_SSP0DR)>>24)); // Read
+ return data;
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes a byte array via SPI
+*/
+/**************************************************************************/
+void pn532SPIWriteArray(byte_t * pbtData, size_t len)
+{
+ while (len != 0)
+ {
+ pn532SPIWrite(*pbtData);
+ pbtData++;
+ len--;
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a single byte via SPI
+*/
+/**************************************************************************/
+uint8_t pn532SPIRead(void)
+{
+ return pn532SPIWrite(0x00);
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a byte array via SPI
+*/
+/**************************************************************************/
+void pn532SPIReadArray(uint8_t* buff, size_t len)
+{
+ size_t i;
+ for (i=0; i<len; i++)
+ {
+ buff[i] = pn532SPIRead();
+ }
+}
+
+
+/**************************************************************************/
+/*!
+ @brief Sends a status request (SPI only)
+*/
+/**************************************************************************/
+uint8_t pn532GetStatus()
+{
+ unsigned char res;
+
+ // Send SPI status request
+ PN532_SELECT;
+ pn532SPIWrite(PN532_SPI_STATREAD);
+ res = pn532SPIRead();
+ PN532_DESELECT;
+
+ return res;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises SPI and configures the PN532
+*/
+/**************************************************************************/
+void pn532HWInit(void)
+{
+ PN532_DEBUG("Initialising SPI %s", CFG_PRINTF_NEWLINE);
+ sspInit(0, sspClockPolarity_Low, sspClockPhase_RisingEdge);
+
+ // Configure CS pin
+ gpioSetDir(PN532_SPI_CSPORT, PN532_SPI_CSPIN, gpioDirection_Output);
+ PN532_DESELECT;
+
+ // Reset PN532 and wait for it to finish booting
+ gpioSetDir(PN532_RSTPD_PORT, PN532_RSTPD_PIN, gpioDirection_Output);
+ PN532_DEBUG("Resetting the PN532...\r\n");
+ gpioSetValue(PN532_RSTPD_PORT, PN532_RSTPD_PIN, 0);
+ systickDelay(400);
+ gpioSetValue(PN532_RSTPD_PORT, PN532_RSTPD_PIN, 1);
+ systickDelay(100);
+}
+
+/**************************************************************************/
+/*!
+ @brief Builds a standard PN532 frame using the supplied data
+
+ @param pbtFrame Pointer to the field that will hold the frame data
+ @param pszFrame Pointer to the field that will hold the frame length
+ @param pbtData Pointer to the data to insert in a frame
+ @param swData Length of the data to insert in bytes
+
+ @note Possible error messages are:
+
+ - PN532_ERROR_EXTENDEDFRAME
+*/
+/**************************************************************************/
+pn532_error_t pn532BuildFrame(byte_t * pbtFrame, size_t * pszFrame, const byte_t * pbtData, const size_t szData)
+{
+ if (szData > PN532_NORMAL_FRAME__DATA_MAX_LEN)
+ {
+ // Extended frames currently unsupported
+ return PN532_ERROR_EXTENDEDFRAME;
+ }
+
+ // LEN - Packet length = data length (len) + checksum (1) + end of stream marker (1)
+ pbtFrame[3] = szData + 1;
+ // LCS - Packet length checksum
+ pbtFrame[4] = 256 - (szData + 1);
+ // TFI
+ pbtFrame[5] = 0xD4;
+ // DATA - Copy the PN53X command into the packet buffer
+ memcpy (pbtFrame + 6, pbtData, szData);
+
+ // DCS - Calculate data payload checksum
+ byte_t btDCS = (256 - 0xD4);
+ size_t szPos;
+ for (szPos = 0; szPos < szData; szPos++)
+ {
+ btDCS -= pbtData[szPos];
+ }
+ pbtFrame[6 + szData] = btDCS;
+
+ // 0x00 - End of stream marker
+ pbtFrame[szData + 7] = 0x00;
+
+ (*pszFrame) = szData + PN532_NORMAL_FRAME__OVERHEAD;
+
+ return PN532_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends the specified command to the PN532, automatically
+ creating an appropriate frame for it
+
+ @param pdbData Pointer to the byte data to send
+ @param szData Length in bytes of the data to send
+
+ @note Possible error messages are:
+
+ - PN532_ERROR_BUSY
+ - PN532_ERROR_NOACK
+ - PN532_ERROR_INVALIDACK
+ - PN532_ERROR_SPIREADYSTATUSTIMEOUT
+*/
+/**************************************************************************/
+pn532_error_t pn532SendCommand(const byte_t * pbtData, const size_t szData)
+{
+ pn532_pcb_t *pn532 = pn532GetPCB();
+
+ // Check busy flag
+ if (pn532->state == PN532_STATE_BUSY)
+ {
+ return PN532_ERROR_BUSY;
+ }
+ pn532->state = PN532_STATE_BUSY;
+
+ // Every packet must start with "00 00 ff"
+ byte_t abtFrame[PN532_BUFFER_LEN] = { 0x00, 0x00, 0xff };
+ size_t szFrame = 0;
+
+ // Build the frame
+ pn532BuildFrame (abtFrame, &szFrame, pbtData, szData);
+
+ // Register the last command that was sent
+ pn532->lastCommand = pbtData[0];
+
+ // Output the frame data for debugging if requested
+ PN532_DEBUG("Sending (%02d): ", szFrame);
+ pn532PrintHex(abtFrame, szFrame);
+
+ PN532_SELECT;
+ systickDelay(5);
+
+ // Send data to the PN532
+ pn532SPIWrite(PN532_SPI_DATAWRITE);
+ pn532SPIWriteArray(abtFrame, szFrame);
+
+ // Wait for READY status
+ size_t t = 0;
+ while (pn532GetStatus() != PN532_SPI_READY)
+ {
+ if(t++>PN532_SPI_TIMEOUT)
+ {
+ PN532_DEBUG("Timeout waiting for READY status%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_SPIREADYSTATUSTIMEOUT;
+ }
+ systickDelay(1);
+ }
+
+ // Read ACK
+ PN532_SELECT;
+ pn532SPIWrite(PN532_SPI_DATAREAD);
+ const byte_t abtAck[6] = { 0x00, 0x00, 0xff, 0x00, 0xff, 0x00 };
+ byte_t abtRxBuf[6];
+ pn532SPIReadArray(abtRxBuf, 6);
+ PN532_DESELECT;
+
+ // Make sure the received ACK matches the prototype
+ if (0 != (memcmp (abtRxBuf, abtAck, 6)))
+ {
+ PN532_DEBUG ("Invalid ACK: ");
+ pn532PrintHex(abtRxBuf, 6);
+ PN532_DEBUG("%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_INVALIDACK;
+ }
+
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a response from the PN532
+
+ @note Possible error message are:
+
+ - PN532_ERROR_BUSY
+ - PN532_ERROR_RESPONSEBUFFEREMPTY
+ - PN532_ERROR_PREAMBLEMISMATCH
+ - PN532_ERROR_APPLEVELERROR
+ - PN532_ERROR_EXTENDEDFRAME
+ - PN532_ERROR_LENCHECKSUMMISMATCH
+ - PN532_ERROR_SPIREADYSTATUSTIMEOUT
+*/
+/**************************************************************************/
+pn532_error_t pn532ReadResponse(byte_t * pbtResponse, size_t * pszRxLen)
+{
+ size_t t, i;
+ pn532_pcb_t *pn532 = pn532GetPCB();
+
+ // Check if we're busy
+ if (pn532->state == PN532_STATE_BUSY)
+ {
+ return PN532_ERROR_BUSY;
+ }
+ pn532->state = PN532_STATE_BUSY;
+ pn532->appError = PN532_APPERROR_NONE;
+
+ // Wait for the response ready signal
+ t = 0;
+ while (pn532GetStatus() != PN532_SPI_READY)
+ {
+ if(t++>PN532_SPI_TIMEOUT)
+ {
+ PN532_DEBUG("Timeout waiting for READY status%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_SPIREADYSTATUSTIMEOUT;
+ }
+ systickDelay(1);
+ }
+
+ PN532_SELECT;
+ systickDelay(1);
+
+ pn532SPIWrite(PN532_SPI_DATAREAD);
+
+ // Check preamble
+ pbtResponse[0] = pn532SPIRead();
+ pbtResponse[1] = pn532SPIRead();
+ pbtResponse[2] = pn532SPIRead();
+ const byte_t pn53x_preamble[3] = { 0x00, 0x00, 0xff };
+ if (0 != (memcmp (pbtResponse, pn53x_preamble, 3)))
+ {
+ PN532_DEBUG("Frame preamble + start code mismatch%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_PREAMBLEMISMATCH;
+ }
+
+ // Check the frame type
+ pbtResponse[3] = pn532SPIRead();
+ pbtResponse[4] = pn532SPIRead();
+ pbtResponse[5] = pn532SPIRead();
+ if ((0x01 == pbtResponse[3]) && (0xff == pbtResponse[4]))
+ {
+ // Error frame
+ PN532_DEBUG("Application level error (%02d)%s", pbtResponse[5], CFG_PRINTF_NEWLINE);
+ // Set application error message ID
+ pn532->appError = pbtResponse[5];
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_APPLEVELERROR;
+ }
+ else if ((0xff == pbtResponse[3]) && (0xff == pbtResponse[4]))
+ {
+ // Extended frame
+ PN532_DEBUG("Extended frames currently unsupported%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_EXTENDEDFRAME;
+ }
+ else
+ {
+ // Check checksum, unless this is a response to the wakeup command
+ if (pn532->lastCommand = PN532_COMMAND_SAMCONFIGURATION)
+ {
+ *pszRxLen = 6;
+ }
+ else
+ {
+ // Normal frame
+ if (256 != (pbtResponse[3] + pbtResponse[4]))
+ {
+ // TODO: Retry
+ PN532_DEBUG("Length checksum mismatch%s", CFG_PRINTF_NEWLINE);
+ pn532PrintHex(pbtResponse, 6);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_LENCHECKSUMMISMATCH;
+ }
+ // Read payload
+ size_t szPayloadLen = pbtResponse[3] - 2;
+ for (i=0; i<szPayloadLen; i++)
+ {
+ pbtResponse[i+6] = pn532SPIRead();
+ }
+ // Get checksum and postamble
+ pbtResponse[i+7] = pn532SPIRead();
+ pbtResponse[i+8] = pn532SPIRead();
+ pbtResponse[i+9] = pn532SPIRead();
+ // Set frame length
+ *pszRxLen = i + 10;
+ }
+ }
+
+ // Display the raw response data for debugging if requested
+ PN532_DEBUG("Received (%02d): ", *pszRxLen);
+ pn532PrintHex(pbtResponse, *pszRxLen);
+
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends the wakeup sequence to the PN532.
+*/
+/**************************************************************************/
+pn532_error_t pn532Wakeup(void)
+{
+ size_t szLen;
+ byte_t abtWakeUp[] = { 0x01,0x55,0x55,0x00,0x00,0x00,0x00,0x00,0xff,0x03,0xfd,0xd4,0x14,0x01,0x17,0x00,0x00,0xff,0x03,0xfd,0xd4,0x14,0x01,0x17,0x00 };
+ // byte_t abtWakeUp[] = { 0x01,0x00,0x00,0xff,0x03,0xfd,0xd4,PN532_COMMAND_SAMCONFIGURATION,0x01,0x17,0x00 };
+
+ pn532_pcb_t *pn532 = pn532GetPCB();
+
+ PN532_DEBUG("Sending Wakeup Sequence%s", CFG_PRINTF_NEWLINE);
+
+ PN532_SELECT;
+ systickDelay(2);
+
+ // Transmit wakeup sequence
+ pn532SPIWriteArray(abtWakeUp, sizeof(abtWakeUp));
+ systickDelay(100);
+
+ // Register the last command that was sent
+ pn532->lastCommand = PN532_COMMAND_SAMCONFIGURATION;
+
+ byte_t response[32];
+ pn532ReadResponse(response, &szLen);
+ PN532_DESELECT;
+
+ // Todo: Check for error ... currently throws a checksum error
+ // that isn't really an error
+
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_NONE;
+}
+
+#endif // #ifdef PN532_SPI
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pn532_drvr_uart.c
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "pn532.h"
+#include "pn532_drvr.h"
+
+#ifdef PN532_UART
+
+#include "core/systick/systick.h"
+#include "core/gpio/gpio.h"
+#include "core/uart/uart.h"
+
+/**************************************************************************/
+/*!
+ @brief Initialises UART and configures the PN532
+*/
+/**************************************************************************/
+void pn532HWInit(void)
+{
+ PN532_DEBUG("Initialising UART (%d)%s", PN532_UART_BAUDRATE, CFG_PRINTF_NEWLINE);
+ uartInit(PN532_UART_BAUDRATE);
+
+ // Set reset pin as output and reset device
+ gpioSetDir(PN532_RSTPD_PORT, PN532_RSTPD_PIN, gpioDirection_Output);
+ PN532_DEBUG("Resetting the PN532...\r\n");
+ gpioSetValue(PN532_RSTPD_PORT, PN532_RSTPD_PIN, 0);
+ systickDelay(400);
+ gpioSetValue(PN532_RSTPD_PORT, PN532_RSTPD_PIN, 1);
+
+ // Wait for the PN532 to finish booting
+ systickDelay(100);
+}
+
+/**************************************************************************/
+/*!
+ @brief Builds a standard PN532 frame using the supplied data
+
+ @param pbtFrame Pointer to the field that will hold the frame data
+ @param pszFrame Pointer to the field that will hold the frame length
+ @param pbtData Pointer to the data to insert in a frame
+ @param swData Length of the data to insert in bytes
+
+ @note Possible error messages are:
+
+ - PN532_ERROR_EXTENDEDFRAME
+*/
+/**************************************************************************/
+pn532_error_t pn532BuildFrame(byte_t * pbtFrame, size_t * pszFrame, const byte_t * pbtData, const size_t szData)
+{
+ if (szData > PN532_NORMAL_FRAME__DATA_MAX_LEN)
+ {
+ // Extended frames currently unsupported
+ return PN532_ERROR_EXTENDEDFRAME;
+ }
+
+ // LEN - Packet length = data length (len) + checksum (1) + end of stream marker (1)
+ pbtFrame[3] = szData + 1;
+ // LCS - Packet length checksum
+ pbtFrame[4] = 256 - (szData + 1);
+ // TFI
+ pbtFrame[5] = 0xD4;
+ // DATA - Copy the PN53X command into the packet buffer
+ memcpy (pbtFrame + 6, pbtData, szData);
+
+ // DCS - Calculate data payload checksum
+ byte_t btDCS = (256 - 0xD4);
+ size_t szPos;
+ for (szPos = 0; szPos < szData; szPos++)
+ {
+ btDCS -= pbtData[szPos];
+ }
+ pbtFrame[6 + szData] = btDCS;
+
+ // 0x00 - End of stream marker
+ pbtFrame[szData + 7] = 0x00;
+
+ (*pszFrame) = szData + PN532_NORMAL_FRAME__OVERHEAD;
+
+ return PN532_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends the specified command to the PN532, automatically
+ creating an appropriate frame for it
+
+ @param pdbData Pointer to the byte data to send
+ @param szData Length in bytes of the data to send
+
+ @note Possible error messages are:
+
+ - PN532_ERROR_BUSY
+ - PN532_ERROR_NOACK
+ - PN532_ERROR_INVALIDACK
+*/
+/**************************************************************************/
+pn532_error_t pn532SendCommand(const byte_t * pbtData, const size_t szData)
+{
+ pn532_pcb_t *pn532 = pn532GetPCB();
+
+ // Check if we're busy
+ if (pn532->state == PN532_STATE_BUSY)
+ {
+ return PN532_ERROR_BUSY;
+ }
+
+ // Flag the stack as busy
+ pn532->state = PN532_STATE_BUSY;
+
+ // Every packet must start with "00 00 ff"
+ byte_t abtFrame[PN532_BUFFER_LEN] = { 0x00, 0x00, 0xff };
+ size_t szFrame = 0;
+
+ // Build the frame
+ pn532BuildFrame (abtFrame, &szFrame, pbtData, szData);
+
+ // Keep track of the last command that was sent
+ pn532->lastCommand = pbtData[0];
+
+ // Output the frame data for debugging if requested
+ PN532_DEBUG("Sending (%02d): ", szFrame);
+ pn532PrintHex(abtFrame, szFrame);
+
+ // Send data to the PN532
+ uartSend (abtFrame, szFrame);
+
+ // Wait for ACK
+ byte_t abtRxBuf[6];
+ uart_pcb_t *uart = uartGetPCB();
+ systickDelay(10); // FIXME: How long should we wait for ACK?
+ if (uart->rxfifo.len < 6)
+ {
+ // Unable to read ACK
+ PN532_DEBUG ("Unable to read ACK%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_NOACK;
+ }
+
+ // Read ACK ... this will also remove it from the buffer
+ const byte_t abtAck[6] = { 0x00, 0x00, 0xff, 0x00, 0xff, 0x00 };
+ abtRxBuf[0] = uartRxBufferRead();
+ abtRxBuf[1] = uartRxBufferRead();
+ abtRxBuf[2] = uartRxBufferRead();
+ abtRxBuf[3] = uartRxBufferRead();
+ abtRxBuf[4] = uartRxBufferRead();
+ abtRxBuf[5] = uartRxBufferRead();
+
+ // Make sure the received ACK matches the prototype
+ if (0 != (memcmp (abtRxBuf, abtAck, 6)))
+ {
+ PN532_DEBUG ("Invalid ACK: ");
+ pn532PrintHex(abtRxBuf, 6);
+ PN532_DEBUG("%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_INVALIDACK;
+ }
+
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a response from the PN532
+
+ @note Possible error message are:
+
+ - PN532_ERROR_BUSY
+ - PN532_ERROR_RESPONSEBUFFEREMPTY
+ - PN532_ERROR_PREAMBLEMISMATCH
+ - PN532_ERROR_APPLEVELERROR
+ - PN532_ERROR_EXTENDEDFRAME
+ - PN532_ERROR_LENCHECKSUMMISMATCH
+*/
+/**************************************************************************/
+pn532_error_t pn532ReadResponse(byte_t * pbtResponse, size_t * pszRxLen)
+{
+ pn532_pcb_t *pn532 = pn532GetPCB();
+
+ // Check if we're busy
+ if (pn532->state == PN532_STATE_BUSY)
+ {
+ return PN532_ERROR_BUSY;
+ }
+
+ // Flag the stack as busy
+ pn532->state = PN532_STATE_BUSY;
+
+ // Reset the app error flag
+ pn532->appError = PN532_APPERROR_NONE;
+
+ // Read response from uart
+ if (!uartRxBufferReadArray(pbtResponse, pszRxLen))
+ {
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_RESPONSEBUFFEREMPTY;
+ }
+
+ // Display the raw response data for debugging if requested
+ PN532_DEBUG("Received (%02d): ", *pszRxLen);
+ pn532PrintHex(pbtResponse, *pszRxLen);
+
+ // Check preamble
+ const byte_t pn53x_preamble[3] = { 0x00, 0x00, 0xff };
+ if (0 != (memcmp (pbtResponse, pn53x_preamble, 3)))
+ {
+ PN532_DEBUG("Frame preamble + start code mismatch%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_PREAMBLEMISMATCH;
+ }
+
+ // Check the frame type
+ if ((0x01 == pbtResponse[3]) && (0xff == pbtResponse[4]))
+ {
+ // Error frame
+ PN532_DEBUG("Application level error (%02d)%s", pbtResponse[5], CFG_PRINTF_NEWLINE);
+ // Set application error message ID
+ pn532->appError = pbtResponse[5];
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_APPLEVELERROR;
+ }
+ else if ((0xff == pbtResponse[3]) && (0xff == pbtResponse[4]))
+ {
+ // Extended frame
+ PN532_DEBUG("Extended frames currently unsupported%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_EXTENDEDFRAME;
+ }
+ else
+ {
+ // Normal frame
+ if (256 != (pbtResponse[3] + pbtResponse[4]))
+ {
+ // TODO: Retry
+ PN532_DEBUG("Length checksum mismatch%s", CFG_PRINTF_NEWLINE);
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_LENCHECKSUMMISMATCH;
+ }
+ // size_t szPayloadLen = abtRx[3] - 2;
+ }
+
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_NONE;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends the wakeup sequence to the PN532.
+*/
+/**************************************************************************/
+pn532_error_t pn532Wakeup(void)
+{
+ size_t szLen;
+ byte_t abtWakeUp[] = { 0x55,0x55,0x00,0x00,0x00,0x00,0x00,0xff,0x03,0xfd,0xd4,0x14,0x01,0x17,0x00,0x00,0xff,0x03,0xfd,0xd4,0x14,0x01,0x17,0x00 };
+
+ pn532_pcb_t *pn532 = pn532GetPCB();
+
+ PN532_DEBUG("Sending Wakeup Sequence%s", CFG_PRINTF_NEWLINE);
+ uartSend(abtWakeUp,sizeof(abtWakeUp));
+ systickDelay(100);
+
+ byte_t response[32];
+ pn532ReadResponse(response, &szLen);
+
+ // Todo: Check for error ... currently throws a checksum error
+ // that isn't really an error
+
+ pn532->state = PN532_STATE_READY;
+ return PN532_ERROR_NONE;
+}
+
+#endif // #ifdef PN532_UART
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pn532_mifare.c
+*/
+/**************************************************************************/
+#include <string.h>
+
+#include "pn532.h"
+#include "pn532_mifare.h"
+
+bool pn532MifareCmd(const pn532_mifare_cmd_t mc, const uint8_t ui8Block, pn532_mifare_param_t * pmp)
+{
+ byte_t abtRx[265];
+ size_t szRx = sizeof(abtRx);
+ size_t szParamLen;
+ byte_t abtCmd[265];
+ bool bEasyFraming;
+
+ abtCmd[0] = mc; // The MIFARE Classic command
+ abtCmd[1] = ui8Block; // The block address (1K=0x00..0x39, 4K=0x00..0xff)
+
+ switch (mc) {
+ // Read and store command have no parameter
+ case PN532_MIFARE_CMD_READ:
+ case PN532_MIFARE_CMD_STORE:
+ szParamLen = 0;
+ break;
+
+ // Authenticate command
+ case PN532_MIFARE_CMD_AUTH_A:
+ case PN532_MIFARE_CMD_AUTH_B:
+ szParamLen = sizeof (pn532_mifare_param_auth_t);
+ break;
+
+ // Data command
+ case PN532_MIFARE_CMD_WRITE:
+ szParamLen = sizeof (pn532_mifare_param_data_t);
+ break;
+
+ // Value command
+ case PN532_MIFARE_CMD_DECREMENT:
+ case PN532_MIFARE_CMD_INCREMENT:
+ case PN532_MIFARE_CMD_TRANSFER:
+ szParamLen = sizeof (pn532_mifare_param_value_t);
+ break;
+
+ // Please fix your code, you never should reach this statement
+ default:
+ return false;
+ break;
+ }
+
+ // When available, copy the parameter bytes
+ if (szParamLen)
+ memcpy (abtCmd + 2, (byte_t *) pmp, szParamLen);
+
+// bEasyFraming = pnd->bEasyFraming;
+// if (!nfc_configure (pnd, NDO_EASY_FRAMING, true)) {
+// nfc_perror (pnd, "nfc_configure");
+// return false;
+// }
+//
+// // Fire the mifare command
+// if (!nfc_initiator_transceive_bytes (pnd, abtCmd, 2 + szParamLen, abtRx, &szRx)) {
+// if (pnd->iLastError == EINVRXFRAM) {
+// // "Invalid received frame" AKA EINVRXFRAM, usual means we are
+// // authenticated on a sector but the requested MIFARE cmd (read, write)
+// // is not permitted by current acces bytes;
+// // So there is nothing to do here.
+// } else {
+// nfc_perror (pnd, "nfc_initiator_transceive_bytes");
+// }
+// nfc_configure (pnd, NDO_EASY_FRAMING, bEasyFraming);
+// return false;
+// }
+// if (!nfc_configure (pnd, NDO_EASY_FRAMING, bEasyFraming)) {
+// nfc_perror (pnd, "nfc_configure");
+// return false;
+// }
+//
+// // When we have executed a read command, copy the received bytes into the param
+// if (mc == MC_READ) {
+// if (szRx == 16) {
+// memcpy (pmp->mpd.abtData, abtRx, 16);
+// } else {
+// return false;
+// }
+// }
+
+ // Command succesfully executed
+ return true;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file pn532_mifare.h
+*/
+/**************************************************************************/
+
+#ifndef __PN532_MIFARE_H__
+#define __PN532_MIFARE_H__
+
+#include "projectconfig.h"
+
+typedef enum pn532_mifare_cmd_e
+{
+ PN532_MIFARE_CMD_AUTH_A = 0x60,
+ PN532_MIFARE_CMD_AUTH_B = 0x61,
+ PN532_MIFARE_CMD_READ = 0x30,
+ PN532_MIFARE_CMD_WRITE = 0xA0,
+ PN532_MIFARE_CMD_TRANSFER = 0xB0,
+ PN532_MIFARE_CMD_DECREMENT = 0xC0,
+ PN532_MIFARE_CMD_INCREMENT = 0xC1,
+ PN532_MIFARE_CMD_STORE = 0xC2
+}
+pn532_mifare_cmd_t;
+
+typedef struct
+{
+ byte_t abtKey[6];
+ byte_t abtUid[4];
+}
+pn532_mifare_param_auth_t;
+
+typedef struct
+{
+ byte_t abtData[16];
+}
+pn532_mifare_param_data_t;
+
+typedef struct
+{
+ byte_t abtValue[4];
+}
+pn532_mifare_param_value_t;
+
+typedef union
+{
+ pn532_mifare_param_auth_t mpa;
+ pn532_mifare_param_data_t mpd;
+ pn532_mifare_param_value_t mpv;
+}
+pn532_mifare_param_t;
+
+// MIFARE Classic
+typedef struct
+{
+ byte_t abtUID[4];
+ byte_t btBCC;
+ byte_t btUnknown;
+ byte_t abtATQA[2];
+ byte_t abtUnknown[8];
+}
+pn532_mifare_classic_block_manufacturer_t;
+
+typedef struct
+{
+ byte_t abtData[16];
+}
+pn532_mifare_classic_block_data_t;
+
+typedef struct
+{
+ byte_t abtKeyA[6];
+ byte_t abtAccessBits[4];
+ byte_t abtKeyB[6];
+}
+pn532_mifare_classic_block_trailer_t;
+
+typedef union
+{
+ pn532_mifare_classic_block_manufacturer_t mbm;
+ pn532_mifare_classic_block_data_t mbd;
+ pn532_mifare_classic_block_trailer_t mbt;
+}
+pn532_mifare_classic_block_t;
+
+typedef struct
+{
+ pn532_mifare_classic_block_t amb[256];
+}
+pn532_mifare_classic_tag_t;
+
+// MIFARE Ultralight
+typedef struct
+{
+ byte_t sn0[3];
+ byte_t btBCC0;
+ byte_t sn1[4];
+ byte_t btBCC1;
+ byte_t internal;
+ byte_t lock[2];
+ byte_t otp[4];
+}
+pn532_mifareul_block_manufacturer_t;
+
+typedef struct
+{
+ byte_t abtData[16];
+}
+pn532_mifareul_block_data_t;
+
+typedef union
+{
+ pn532_mifareul_block_manufacturer_t mbm;
+ pn532_mifareul_block_data_t mbd;
+}
+pn532_mifareul_block_t;
+
+typedef struct
+{
+ pn532_mifareul_block_t amb[4];
+}
+pn532_mifareul_tag_t;
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file tcs3414.c
+ @author K. Townsend (microBuilder.eu)
+ Morten Hjerde (tcs3414CalculateCCT)
+
+ @brief Drivers for the TAOS TCS3414 I2C RGB sensor
+
+ @section DESCRIPTION
+
+ The TAOS TCS3414 is a digital color/light sensor that can be used
+ to derive the color chromaticity and illuminance of ambient light
+ with 16-bit resolution. The device has an array of filtered
+ photo-diodes with 4 red, 4 green, 4 blue and 4 unfiltered
+ captors. The sensor has digital gain and prescalar support so that
+ the sensitivty of the device can be dynamically adjusted with a
+ 1,000,000:1 dynamic range.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "tcs3414.h"
+#include "core/systick/systick.h"
+
+extern volatile uint8_t I2CMasterBuffer[I2C_BUFSIZE];
+extern volatile uint8_t I2CSlaveBuffer[I2C_BUFSIZE];
+extern volatile uint32_t I2CReadLength, I2CWriteLength;
+
+uint32_t i;
+
+static bool _tcs3414Initialised = false;
+
+/**************************************************************************/
+/*!
+ @brief Sends a single command byte over I2C
+*/
+/**************************************************************************/
+tcs3414Error_e tcs3414WriteCmd (uint8_t cmd)
+{
+ // Clear write buffers
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 2;
+ I2CReadLength = 0;
+ I2CMasterBuffer[0] = TCS3414_ADDRESS; // I2C device address
+ I2CMasterBuffer[1] = cmd; // Command register
+ i2cEngine();
+ return TCS3414_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes an 8 bit values over I2C
+*/
+/**************************************************************************/
+tcs3414Error_e tcs3414Write8 (uint8_t reg, uint32_t value)
+{
+ // Clear write buffers
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 3;
+ I2CReadLength = 0;
+ I2CMasterBuffer[0] = TCS3414_ADDRESS; // I2C device address
+ I2CMasterBuffer[1] = reg; // Command register
+ I2CMasterBuffer[2] = (value & 0xFF); // Value to write
+ i2cEngine();
+ return TCS3414_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a 16 bit values over I2C
+*/
+/**************************************************************************/
+tcs3414Error_e tcs3414Read16(uint8_t reg, uint16_t *value)
+{
+ // Clear write buffers
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 2;
+ I2CReadLength = 2;
+ I2CMasterBuffer[0] = TCS3414_ADDRESS; // I2C device address
+ I2CMasterBuffer[1] = reg; // Command register
+ // Append address w/read bit
+ I2CMasterBuffer[2] = TCS3414_ADDRESS | TCS3414_READBIT;
+ i2cEngine();
+
+ // Shift values to create properly formed integer (low byte first)
+ *value = (I2CSlaveBuffer[0] | (I2CSlaveBuffer[1] << 8));
+
+ return TCS3414_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the I2C block
+*/
+/**************************************************************************/
+tcs3414Error_e tcs3414Init(void)
+{
+ // Initialise I2C
+ if (i2cInit(I2CMASTER) == false)
+ {
+ return TCS3414_ERROR_I2CINIT; /* Fatal error */
+ }
+
+ _tcs3414Initialised = true;
+
+ // Note: by default, the device is in power down mode on bootup
+
+ return TCS3414_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the gain and prescalar to control sensitivty
+*/
+/**************************************************************************/
+tcs3414Error_e tcs3414SetSensitivity(tcs3414Gain_t gain, tcs3414Prescalar_t prescalar)
+{
+ if (!_tcs3414Initialised) tcs3414Init();
+
+ tcs3414Error_e error = TCS3414_ERROR_OK;
+
+ // Enable the device by setting the control bit to 0x03 (power + ADC on)
+ error = tcs3414Write8(TCS3414_COMMAND_BIT | TCS3414_REGISTER_CONTROL, TCS3414_CONTROL_POWERON);
+ if (error) return error;
+
+ // Set the gani and prescalar values using the GAIN register
+ error = tcs3414Write8(TCS3414_COMMAND_BIT | TCS3414_REGISTER_GAIN, gain | prescalar);
+ if (error) return error;
+
+ // Turn the device off to save power
+ error = tcs3414Write8(TCS3414_COMMAND_BIT | TCS3414_REGISTER_CONTROL, TCS3414_CONTROL_POWEROFF);
+ if (error) return error;
+
+ return error;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the RGB and clear luminosity from the TCS3414
+*/
+/**************************************************************************/
+tcs3414Error_e tcs3414GetRGBL(uint16_t *red, uint16_t *green, uint16_t *blue, uint16_t *clear)
+{
+ if (!_tcs3414Initialised) tcs3414Init();
+
+ tcs3414Error_e error = TCS3414_ERROR_OK;
+
+ // Enable the device by setting the control bit to 0x03 (power + ADC on)
+ error = tcs3414Write8(TCS3414_COMMAND_BIT | TCS3414_REGISTER_CONTROL, TCS3414_CONTROL_POWERON);
+ if (error) return error;
+
+ // Wait >12ms for ADC to complete
+ systickDelay(13);
+
+ // Reads two byte red value
+ error = tcs3414Read16(TCS3414_COMMAND_BIT | TCS3414_WORD_BIT | TCS3414_REGISTER_REDLOW, red);
+ if (error) return error;
+
+ // Reads two byte green value
+ error = tcs3414Read16(TCS3414_COMMAND_BIT | TCS3414_WORD_BIT | TCS3414_REGISTER_GREENLOW, green);
+ if (error) return error;
+
+ // Reads two byte blue value
+ error = tcs3414Read16(TCS3414_COMMAND_BIT | TCS3414_WORD_BIT | TCS3414_REGISTER_BLUELOW, blue);
+ if (error) return error;
+
+ // Reads two byte clear value
+ error = tcs3414Read16(TCS3414_COMMAND_BIT | TCS3414_WORD_BIT | TCS3414_REGISTER_CLEARLOW, clear);
+ if (error) return error;
+
+ // Turn the device off to save power
+ error = tcs3414Write8(TCS3414_COMMAND_BIT | TCS3414_REGISTER_CONTROL, TCS3414_CONTROL_POWEROFF);
+ if (error) return error;
+
+ return error;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the RGB values from the TCS3414 color sensor and
+ calculates CCT (Correlated Color Temperature)
+
+ @return The Correlated Color Temperature in Kelvin
+*/
+/**************************************************************************/
+uint32_t tcs3414CalculateCCT (uint16_t red, uint16_t green, uint16_t blue)
+{
+ volatile float R;
+ volatile float G;
+ volatile float B;
+ volatile float X;
+ volatile float Y;
+ volatile float Z;
+ volatile float x;
+ volatile float y;
+ volatile float n;
+ volatile float CCT;
+
+ // Convert RGB values to a 0-100 scale
+ R = (((float) red) / 65536) * 100;
+ G = (((float) green) / 65536) * 100;
+ B = (((float) blue)/ 65536) * 100;
+
+ //do matrix transformation
+ X = (-0.14282 * R) + (1.54924 * G) + (-0.95641 * B);
+ Y = (-0.32466 * R) + (1.57837 * G) + (-0.73191 * B);
+ Z = (-0.68202 * R) + (0.77073 * G) + (0.56332 * B);
+
+ //calc chromaticity coordinates
+ x = (X)/(X + Y + Z);
+ y = (Y)/(X + Y + Z);
+
+ //use McCamy\92s formula to get CCT:
+ n = (x - 0.3320) / (0.1858 - y);
+ CCT = (449 * n * n * n); // we don't have pow
+ CCT += (3525 * n * n);
+ CCT += (6823.3 * n);
+ CCT += 5520.33;
+
+ return ((uint32_t) CCT);
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file tcs3414.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _TCS3414_H_
+#define _TCS3414_H_
+
+#include "projectconfig.h"
+#include "core/i2c/i2c.h"
+
+#define TCS3414_ADDRESS (0x72) // 0111001 shifted left 1 bit = 0x72 (ADDR = GND or floating)
+#define TCS3414_READBIT (0x01)
+
+#define TCS3414_COMMAND_BIT (0x80) // Must be 1
+#define TCS3414_WORD_BIT (0x20) // 1 = read/write word (rather than byte)
+
+#define TCS3414_REGISTER_CONTROL (0x00)
+#define TCS3414_REGISTER_TIMING (0x01)
+#define TCS3414_REGISTER_INTERRUPT (0x02)
+#define TCS3414_REGISTER_INTSOURCE (0x03)
+#define TCS3414_REGISTER_PARTNO_REVID (0x04)
+#define TCS3414_REGISTER_GAIN (0x07)
+#define TCS3414_REGISTER_LOWTHRESHOLD_LOWBYTE (0x08)
+#define TCS3414_REGISTER_LOWTHRESHOLD_HIGHBYTE (0x09)
+#define TCS3414_REGISTER_HIGHTHRESHOLD_LOWBYTE (0x0A)
+#define TCS3414_REGISTER_HIGHTHRESHOLD_HIGHBYTE (0x0B)
+#define TCS3414_REGISTER_GREENLOW (0x10)
+#define TCS3414_REGISTER_GREENHIGH (0x11)
+#define TCS3414_REGISTER_REDLOW (0x12)
+#define TCS3414_REGISTER_REDHIGH (0x13)
+#define TCS3414_REGISTER_BLUELOW (0x14)
+#define TCS3414_REGISTER_BLUEHIGH (0x15)
+#define TCS3414_REGISTER_CLEARLOW (0x16)
+#define TCS3414_REGISTER_CLEARHIGH (0x17)
+
+#define TCS3414_CONTROL_POWERON (0x03)
+#define TCS3414_CONTROL_POWEROFF (0x00)
+
+#define TCS3414_GAIN_GAINMASK (0x30)
+#define TCS3414_GAIN_PRESCALARMASK (0x07)
+
+/**************************************************************************/
+/*!
+ The Gain setting (bit [5:4] in the GAIN register) multiplies the output
+ by the specified amount, allowing you to adjust it's sensitivity and
+ dynamic range.
+*/
+/**************************************************************************/
+typedef enum
+{
+ tcs3414Gain_1 = 0x00,
+ tcs3414Gain_4 = 0x10,
+ tcs3414Gain_16 = 0x20,
+ tcs3414Gain_64 = 0x30
+}
+tcs3414Gain_t;
+
+/**************************************************************************/
+/*!
+ The Prescalar (bits [2:0] in the GAIN register) divides down the
+ output by the specified amount, allowing you to adjust it's
+ sensitivity and dynamic range.
+*/
+/**************************************************************************/
+typedef enum
+{
+ tcs3414Prescalar_1 = 0x00,
+ tcs3414Prescalar_2 = 0x01,
+ tcs3414Prescalar_4 = 0x02,
+ tcs3414Prescalar_8 = 0x03,
+ tcs3414Prescalar_16 = 0x04,
+ tcs3414Prescalar_32 = 0x05,
+ tcs3414Prescalar_64 = 0x06
+}
+tcs3414Prescalar_t;
+
+/**************************************************************************/
+/*!
+ Possible I2C error messages
+*/
+/**************************************************************************/
+typedef enum
+{
+ TCS3414_ERROR_OK = 0, // Everything executed normally
+ TCS3414_ERROR_I2CINIT, // Unable to initialise I2C
+ TCS3414_ERROR_I2CBUSY, // I2C already in use
+ TCS3414_ERROR_LAST
+}
+tcs3414Error_e;
+
+tcs3414Error_e tcs3414Init(void);
+tcs3414Error_e tcs3414SetSensitivity(tcs3414Gain_t gain, tcs3414Prescalar_t prescalar);
+tcs3414Error_e tcs3414GetRGBL (uint16_t *red, uint16_t *green, uint16_t *blue, uint16_t *clear);
+uint32_t tcs3414CalculateCCT (uint16_t red, uint16_t green, uint16_t blue);
+
+#endif
+
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file tsl2561.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Drivers for the TAOS TSL2561 I2C digital luminosity sensor
+
+ @section DESCRIPTION
+
+ The TSL2561 is a 16-bit digital luminosity sensor the approximates
+ the human eye's response to light. It contains one broadband
+ photodiode that measures visible plus infrared light (channel 0)
+ and one infrared photodiode (channel 1).
+
+ @section EXAMPLE
+
+ @code
+ #include "drivers/sensors/tsl2561/tsl2561.h"
+ ...
+ uint16_t broadband, ir;
+ uint32_t lux;
+
+ // Initialise luminosity sensor
+ tsl2561Init();
+
+ // Optional ... default setting is 400ms with no gain
+ // Set timing to 101ms with no gain
+ tsl2561SetTiming(TSL2561_INTEGRATIONTIME_101MS, TSL2561_GAIN_0X);
+
+ // Check luminosity level and calculate lux
+ tsl2561GetLuminosity(&broadband, &ir);
+ lux = tsl2561CalculateLux(broadband, ir);
+ printf("Broadband: %u, IR: %u, Lux: %d %s", broadband, ir, lux, CFG_PRINTF_NEWLINE);
+
+ @endcode
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "tsl2561.h"
+#include "core/systick/systick.h"
+
+extern volatile uint8_t I2CMasterBuffer[I2C_BUFSIZE];
+extern volatile uint8_t I2CSlaveBuffer[I2C_BUFSIZE];
+extern volatile uint32_t I2CReadLength, I2CWriteLength;
+
+uint32_t i;
+
+static bool _tsl2561Initialised = false;
+static tsl2561IntegrationTime_t _tsl2561IntegrationTime = TSL2561_INTEGRATIONTIME_402MS;
+static tsl2561Gain_t _tsl2561Gain = TSL2561_GAIN_0X;
+
+/**************************************************************************/
+/*!
+ @brief Sends a single command byte over I2C
+*/
+/**************************************************************************/
+tsl2561Error_t tsl2561WriteCmd (uint8_t cmd)
+{
+ // Clear write buffers
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 2;
+ I2CReadLength = 0;
+ I2CMasterBuffer[0] = TSL2561_ADDRESS; // I2C device address
+ I2CMasterBuffer[1] = cmd; // Command register
+ i2cEngine();
+ return TSL2561_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Writes an 8 bit values over I2C
+*/
+/**************************************************************************/
+tsl2561Error_t tsl2561Write8 (uint8_t reg, uint32_t value)
+{
+ // Clear write buffers
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 3;
+ I2CReadLength = 0;
+ I2CMasterBuffer[0] = TSL2561_ADDRESS; // I2C device address
+ I2CMasterBuffer[1] = reg; // Command register
+ I2CMasterBuffer[2] = (value & 0xFF); // Value to write
+ i2cEngine();
+ return TSL2561_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads a 16 bit values over I2C
+*/
+/**************************************************************************/
+tsl2561Error_t tsl2561Read16(uint8_t reg, uint16_t *value)
+{
+ // Clear write buffers
+ for ( i = 0; i < I2C_BUFSIZE; i++ )
+ {
+ I2CMasterBuffer[i] = 0x00;
+ }
+
+ I2CWriteLength = 2;
+ I2CReadLength = 2;
+ I2CMasterBuffer[0] = TSL2561_ADDRESS; // I2C device address
+ I2CMasterBuffer[1] = reg; // Command register
+ // Append address w/read bit
+ I2CMasterBuffer[2] = TSL2561_ADDRESS | TSL2561_READBIT;
+ i2cEngine();
+
+ // Shift values to create properly formed integer (low byte first)
+ *value = (I2CSlaveBuffer[0] | (I2CSlaveBuffer[1] << 8));
+
+ return TSL2561_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Enables the device
+*/
+/**************************************************************************/
+tsl2561Error_t tsl2561Enable(void)
+{
+ if (!_tsl2561Initialised) tsl2561Init();
+
+ // Enable the device by setting the control bit to 0x03
+ return tsl2561Write8(TSL2561_COMMAND_BIT | TSL2561_REGISTER_CONTROL, TSL2561_CONTROL_POWERON);
+}
+
+/**************************************************************************/
+/*!
+ @brief Disables the device (putting it in lower power sleep mode)
+*/
+/**************************************************************************/
+tsl2561Error_t tsl2561Disable(void)
+{
+ if (!_tsl2561Initialised) tsl2561Init();
+
+ // Turn the device off to save power
+ return tsl2561Write8(TSL2561_COMMAND_BIT | TSL2561_REGISTER_CONTROL, TSL2561_CONTROL_POWEROFF);
+}
+
+/**************************************************************************/
+/*!
+ @brief Initialises the I2C block
+*/
+/**************************************************************************/
+tsl2561Error_t tsl2561Init(void)
+{
+ // Initialise I2C
+ if (i2cInit(I2CMASTER) == false)
+ {
+ return TSL2561_ERROR_I2CINIT; /* Fatal error */
+ }
+
+ _tsl2561Initialised = true;
+
+ // Set default integration time and gain
+ tsl2561SetTiming(_tsl2561IntegrationTime, _tsl2561Gain);
+
+ // Note: by default, the device is in power down mode on bootup
+
+ return TSL2561_ERROR_OK;
+}
+
+/**************************************************************************/
+/*!
+ @brief Sets the integration time and gain (controls sensitivity)
+*/
+/**************************************************************************/
+tsl2561Error_t tsl2561SetTiming(tsl2561IntegrationTime_t integration, tsl2561Gain_t gain)
+{
+ if (!_tsl2561Initialised) tsl2561Init();
+
+ tsl2561Error_t error = TSL2561_ERROR_OK;
+
+ // Enable the device by setting the control bit to 0x03
+ error = tsl2561Enable();
+ if (error) return error;
+
+ // Turn the device off to save power
+ error = tsl2561Write8(TSL2561_COMMAND_BIT | TSL2561_REGISTER_TIMING, integration | gain);
+ if (error) return error;
+
+ // Update value placeholders
+ _tsl2561IntegrationTime = integration;
+ _tsl2561Gain = gain;
+
+ // Turn the device off to save power
+ error = tsl2561Disable();
+ if (error) return error;
+
+ return error;
+}
+
+/**************************************************************************/
+/*!
+ @brief Reads the luminosity on both channels from the TSL2561
+*/
+/**************************************************************************/
+tsl2561Error_t tsl2561GetLuminosity (uint16_t *broadband, uint16_t *ir)
+{
+ if (!_tsl2561Initialised) tsl2561Init();
+
+ tsl2561Error_t error = TSL2561_ERROR_OK;
+
+ // Enable the device by setting the control bit to 0x03
+ error = tsl2561Enable();
+ if (error) return error;
+
+ // Wait x ms for ADC to complete
+ switch (_tsl2561IntegrationTime)
+ {
+ case TSL2561_INTEGRATIONTIME_13MS:
+ systickDelay(14);
+ break;
+ case TSL2561_INTEGRATIONTIME_101MS:
+ systickDelay(102);
+ break;
+ default:
+ systickDelay(400);
+ break;
+ }
+
+ // Reads two byte value from channel 0 (visible + infrared)
+ error = tsl2561Read16(TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN0_LOW, broadband);
+ if (error) return error;
+
+ // Reads two byte value from channel 1 (infrared)
+ error = tsl2561Read16(TSL2561_COMMAND_BIT | TSL2561_WORD_BIT | TSL2561_REGISTER_CHAN1_LOW, ir);
+ if (error) return error;
+
+ // Turn the device off to save power
+ error = tsl2561Disable();
+ if (error) return error;
+
+ return error;
+}
+
+/**************************************************************************/
+/*!
+ @brief Calculates LUX from the supplied ch0 (broadband) and ch1
+ (IR) readings
+*/
+/**************************************************************************/
+uint32_t tsl2561CalculateLux(uint16_t ch0, uint16_t ch1)
+{
+ unsigned long chScale;
+ unsigned long channel1;
+ unsigned long channel0;
+
+ switch (_tsl2561IntegrationTime)
+ {
+ case TSL2561_INTEGRATIONTIME_13MS:
+ chScale = TSL2561_LUX_CHSCALE_TINT0;
+ break;
+ case TSL2561_INTEGRATIONTIME_101MS:
+ chScale = TSL2561_LUX_CHSCALE_TINT1;
+ break;
+ default: // No scaling ... integration time = 402ms
+ chScale = (1 << TSL2561_LUX_CHSCALE);
+ break;
+ }
+
+ // Scale for gain (1x or 16x)
+ if (!_tsl2561Gain) chScale = chScale << 4;
+
+ // scale the channel values
+ channel0 = (ch0 * chScale) >> TSL2561_LUX_CHSCALE;
+ channel1 = (ch1 * chScale) >> TSL2561_LUX_CHSCALE;
+
+ // find the ratio of the channel values (Channel1/Channel0)
+ unsigned long ratio1 = 0;
+ if (channel0 != 0) ratio1 = (channel1 << (TSL2561_LUX_RATIOSCALE+1)) / channel0;
+
+ // round the ratio value
+ unsigned long ratio = (ratio1 + 1) >> 1;
+
+ unsigned int b, m;
+
+#ifdef TSL2561_PACKAGE_CS
+ if ((ratio >= 0) && (ratio <= TSL2561_LUX_K1C))
+ {b=TSL2561_LUX_B1C; m=TSL2561_LUX_M1C;}
+ else if (ratio <= TSL2561_LUX_K2C)
+ {b=TSL2561_LUX_B2C; m=TSL2561_LUX_M2C;}
+ else if (ratio <= TSL2561_LUX_K3C)
+ {b=TSL2561_LUX_B3C; m=TSL2561_LUX_M3C;}
+ else if (ratio <= TSL2561_LUX_K4C)
+ {b=TSL2561_LUX_B4C; m=TSL2561_LUX_M4C;}
+ else if (ratio <= TSL2561_LUX_K5C)
+ {b=TSL2561_LUX_B5C; m=TSL2561_LUX_M5C;}
+ else if (ratio <= TSL2561_LUX_K6C)
+ {b=TSL2561_LUX_B6C; m=TSL2561_LUX_M6C;}
+ else if (ratio <= TSL2561_LUX_K7C)
+ {b=TSL2561_LUX_B7C; m=TSL2561_LUX_M7C;}
+ else if (ratio > TSL2561_LUX_K8C)
+ {b=TSL2561_LUX_B8C; m=TSL2561_LUX_M8C;}
+#else
+ if ((ratio >= 0) && (ratio <= TSL2561_LUX_K1T))
+ {b=TSL2561_LUX_B1T; m=TSL2561_LUX_M1T;}
+ else if (ratio <= TSL2561_LUX_K2T)
+ {b=TSL2561_LUX_B2T; m=TSL2561_LUX_M2T;}
+ else if (ratio <= TSL2561_LUX_K3T)
+ {b=TSL2561_LUX_B3T; m=TSL2561_LUX_M3T;}
+ else if (ratio <= TSL2561_LUX_K4T)
+ {b=TSL2561_LUX_B4T; m=TSL2561_LUX_M4T;}
+ else if (ratio <= TSL2561_LUX_K5T)
+ {b=TSL2561_LUX_B5T; m=TSL2561_LUX_M5T;}
+ else if (ratio <= TSL2561_LUX_K6T)
+ {b=TSL2561_LUX_B6T; m=TSL2561_LUX_M6T;}
+ else if (ratio <= TSL2561_LUX_K7T)
+ {b=TSL2561_LUX_B7T; m=TSL2561_LUX_M7T;}
+ else if (ratio > TSL2561_LUX_K8T)
+ {b=TSL2561_LUX_B8T; m=TSL2561_LUX_M8T;}
+#endif
+
+ unsigned long temp;
+ temp = ((channel0 * b) - (channel1 * m));
+
+ // do not allow negative lux value
+ if (temp < 0) temp = 0;
+
+ // round lsb (2^(LUX_SCALE-1))
+ temp += (1 << (TSL2561_LUX_LUXSCALE-1));
+
+ // strip off fractional portion
+ uint32_t lux = temp >> TSL2561_LUX_LUXSCALE;
+
+ // Signal I2C had no errors
+ return lux;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file tsl2561.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _TSL2561_H_
+#define _TSL2561_H_
+
+#include "projectconfig.h"
+#include "core/i2c/i2c.h"
+
+#define TSL2561_PACKAGE_CS // Lux calculations differ slightly for CS package
+// #define TSL2561_PACKAGE_T_FN_CL
+
+#define TSL2561_ADDRESS (0x72) // 0111001 shifted left 1 bit = 0x72 (ADDR = GND or floating)
+#define TSL2561_READBIT (0x01)
+
+#define TSL2561_COMMAND_BIT (0x80) // Must be 1
+#define TSL2561_CLEAR_BIT (0x40) // Clears any pending interrupt (write 1 to clear)
+#define TSL2561_WORD_BIT (0x20) // 1 = read/write word (rather than byte)
+#define TSL2561_BLOCK_BIT (0x10) // 1 = using block read/write
+
+#define TSL2561_CONTROL_POWERON (0x03)
+#define TSL2561_CONTROL_POWEROFF (0x00)
+
+#define TSL2561_LUX_LUXSCALE (14) // Scale by 2^14
+#define TSL2561_LUX_RATIOSCALE (9) // Scale ratio by 2^9
+#define TSL2561_LUX_CHSCALE (10) // Scale channel values by 2^10
+#define TSL2561_LUX_CHSCALE_TINT0 (0x7517) // 322/11 * 2^TSL2561_LUX_CHSCALE
+#define TSL2561_LUX_CHSCALE_TINT1 (0x0FE7) // 322/81 * 2^TSL2561_LUX_CHSCALE
+
+// T, FN and CL package values
+#define TSL2561_LUX_K1T (0x0040) // 0.125 * 2^RATIO_SCALE
+#define TSL2561_LUX_B1T (0x01f2) // 0.0304 * 2^LUX_SCALE
+#define TSL2561_LUX_M1T (0x01be) // 0.0272 * 2^LUX_SCALE
+#define TSL2561_LUX_K2T (0x0080) // 0.250 * 2^RATIO_SCALE
+#define TSL2561_LUX_B2T (0x0214) // 0.0325 * 2^LUX_SCALE
+#define TSL2561_LUX_M2T (0x02d1) // 0.0440 * 2^LUX_SCALE
+#define TSL2561_LUX_K3T (0x00c0) // 0.375 * 2^RATIO_SCALE
+#define TSL2561_LUX_B3T (0x023f) // 0.0351 * 2^LUX_SCALE
+#define TSL2561_LUX_M3T (0x037b) // 0.0544 * 2^LUX_SCALE
+#define TSL2561_LUX_K4T (0x0100) // 0.50 * 2^RATIO_SCALE
+#define TSL2561_LUX_B4T (0x0270) // 0.0381 * 2^LUX_SCALE
+#define TSL2561_LUX_M4T (0x03fe) // 0.0624 * 2^LUX_SCALE
+#define TSL2561_LUX_K5T (0x0138) // 0.61 * 2^RATIO_SCALE
+#define TSL2561_LUX_B5T (0x016f) // 0.0224 * 2^LUX_SCALE
+#define TSL2561_LUX_M5T (0x01fc) // 0.0310 * 2^LUX_SCALE
+#define TSL2561_LUX_K6T (0x019a) // 0.80 * 2^RATIO_SCALE
+#define TSL2561_LUX_B6T (0x00d2) // 0.0128 * 2^LUX_SCALE
+#define TSL2561_LUX_M6T (0x00fb) // 0.0153 * 2^LUX_SCALE
+#define TSL2561_LUX_K7T (0x029a) // 1.3 * 2^RATIO_SCALE
+#define TSL2561_LUX_B7T (0x0018) // 0.00146 * 2^LUX_SCALE
+#define TSL2561_LUX_M7T (0x0012) // 0.00112 * 2^LUX_SCALE
+#define TSL2561_LUX_K8T (0x029a) // 1.3 * 2^RATIO_SCALE
+#define TSL2561_LUX_B8T (0x0000) // 0.000 * 2^LUX_SCALE
+#define TSL2561_LUX_M8T (0x0000) // 0.000 * 2^LUX_SCALE
+
+// CS package values
+#define TSL2561_LUX_K1C (0x0043) // 0.130 * 2^RATIO_SCALE
+#define TSL2561_LUX_B1C (0x0204) // 0.0315 * 2^LUX_SCALE
+#define TSL2561_LUX_M1C (0x01ad) // 0.0262 * 2^LUX_SCALE
+#define TSL2561_LUX_K2C (0x0085) // 0.260 * 2^RATIO_SCALE
+#define TSL2561_LUX_B2C (0x0228) // 0.0337 * 2^LUX_SCALE
+#define TSL2561_LUX_M2C (0x02c1) // 0.0430 * 2^LUX_SCALE
+#define TSL2561_LUX_K3C (0x00c8) // 0.390 * 2^RATIO_SCALE
+#define TSL2561_LUX_B3C (0x0253) // 0.0363 * 2^LUX_SCALE
+#define TSL2561_LUX_M3C (0x0363) // 0.0529 * 2^LUX_SCALE
+#define TSL2561_LUX_K4C (0x010a) // 0.520 * 2^RATIO_SCALE
+#define TSL2561_LUX_B4C (0x0282) // 0.0392 * 2^LUX_SCALE
+#define TSL2561_LUX_M4C (0x03df) // 0.0605 * 2^LUX_SCALE
+#define TSL2561_LUX_K5C (0x014d) // 0.65 * 2^RATIO_SCALE
+#define TSL2561_LUX_B5C (0x0177) // 0.0229 * 2^LUX_SCALE
+#define TSL2561_LUX_M5C (0x01dd) // 0.0291 * 2^LUX_SCALE
+#define TSL2561_LUX_K6C (0x019a) // 0.80 * 2^RATIO_SCALE
+#define TSL2561_LUX_B6C (0x0101) // 0.0157 * 2^LUX_SCALE
+#define TSL2561_LUX_M6C (0x0127) // 0.0180 * 2^LUX_SCALE
+#define TSL2561_LUX_K7C (0x029a) // 1.3 * 2^RATIO_SCALE
+#define TSL2561_LUX_B7C (0x0037) // 0.00338 * 2^LUX_SCALE
+#define TSL2561_LUX_M7C (0x002b) // 0.00260 * 2^LUX_SCALE
+#define TSL2561_LUX_K8C (0x029a) // 1.3 * 2^RATIO_SCALE
+#define TSL2561_LUX_B8C (0x0000) // 0.000 * 2^LUX_SCALE
+#define TSL2561_LUX_M8C (0x0000) // 0.000 * 2^LUX_SCALE
+
+enum
+{
+ TSL2561_REGISTER_CONTROL = 0x00,
+ TSL2561_REGISTER_TIMING = 0x01,
+ TSL2561_REGISTER_THRESHHOLDL_LOW = 0x02,
+ TSL2561_REGISTER_THRESHHOLDL_HIGH = 0x03,
+ TSL2561_REGISTER_THRESHHOLDH_LOW = 0x04,
+ TSL2561_REGISTER_THRESHHOLDH_HIGH = 0x05,
+ TSL2561_REGISTER_INTERRUPT = 0x06,
+ TSL2561_REGISTER_CRC = 0x08,
+ TSL2561_REGISTER_ID = 0x0A,
+ TSL2561_REGISTER_CHAN0_LOW = 0x0C,
+ TSL2561_REGISTER_CHAN0_HIGH = 0x0D,
+ TSL2561_REGISTER_CHAN1_LOW = 0x0E,
+ TSL2561_REGISTER_CHAN1_HIGH = 0x0F
+};
+
+typedef enum
+{
+ TSL2561_INTEGRATIONTIME_13MS = 0x00, // 13.7ms
+ TSL2561_INTEGRATIONTIME_101MS = 0x01, // 101ms
+ TSL2561_INTEGRATIONTIME_402MS = 0x02 // 402ms
+}
+tsl2561IntegrationTime_t;
+
+typedef enum
+{
+ TSL2561_GAIN_0X = 0x00, // No gain
+ TSL2561_GAIN_16X = 0x10, // 16x gain
+}
+tsl2561Gain_t;
+
+typedef enum
+{
+ TSL2561_ERROR_OK = 0, // Everything executed normally
+ TSL2561_ERROR_I2CINIT, // Unable to initialise I2C
+ TSL2561_ERROR_I2CBUSY, // I2C already in use
+ TSL2561_ERROR_LAST
+}
+tsl2561Error_t;
+
+tsl2561Error_t tsl2561Init(void);
+tsl2561Error_t tsl2561SetTiming(tsl2561IntegrationTime_t integration, tsl2561Gain_t gain);
+tsl2561Error_t tsl2561GetLuminosity (uint16_t *broadband, uint16_t *ir);
+uint32_t tsl2561CalculateLux(uint16_t ch0, uint16_t ch1);
+
+#endif
+
+
--- /dev/null
+;
+; Keil - An ARM Company Comunication Device Class driver installation file
+; (C)2007 Copyright
+;
+
+[Version]
+Signature="$Windows NT$"
+Class=Ports
+ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
+Provider=%Keil%
+;LayoutFile=layout.inf
+DriverVer=01/06/07
+
+[Manufacturer]
+%Keil%=DeviceList
+
+[DestinationDirs]
+DefaultDestDir=12
+
+[SourceDisksFiles]
+
+[SourceDisksNames]
+
+[DeviceList]
+%DESCRIPTION%=LPC134xUSB, USB\VID_239A&PID_1002
+
+;------------------------------------------------------------------------------
+; Windows 2000/XP Sections
+;------------------------------------------------------------------------------
+
+[LPC134xUSB.nt]
+include=mdmcpq.inf
+CopyFiles=DriverCopyFiles
+AddReg=LPC134xUSB.nt.AddReg
+
+[DriverCopyFiles]
+usbser.sys,,,0x20
+
+[LPC134xUSB.nt.AddReg]
+HKR,,DevLoader,,*ntkern
+HKR,,NTMPDriver,,usbser.sys
+HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
+
+[LPC134xUSB.nt.Services]
+include=mdmcpq.inf
+AddService=usbser, 0x00000002, DriverService
+
+
+[LPC134xUSB.nt.HW]
+include=mdmcpq.inf
+
+[DriverService]
+DisplayName=%DESCRIPTION%
+ServiceType=1
+StartType=3
+ErrorControl=1
+ServiceBinary=%12%\usbser.sys
+
+;------------------------------------------------------------------------------
+; String Definitions
+;------------------------------------------------------------------------------
+
+[Strings]
+NXP="NXP - Founded by Philips"
+DESCRIPTION="LPC134x USB VCom Port"
--- /dev/null
+/**************************************************************************/
+/*!
+ @file lpc134x.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section DESCRIPTION
+
+ LPC1343 header file, based on V0.10 of the LPC1343 User Manual.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _LPC134X_H_
+#define _LPC134X_H_
+
+#include "sysdefs.h"
+#include "projectconfig.h"
+
+/*##############################################################################
+## System Control Block
+##############################################################################*/
+
+#define SCB_BASE_ADDRESS (*(pREG32 (0x40048000))) // System control block base address
+
+#define SCB_MEMREMAP (*(pREG32 (0x40048000))) // System memory remap
+#define SCB_PRESETCTRL (*(pREG32 (0x40048004))) // Peripheral reset control
+#define SCB_PLLCTRL (*(pREG32 (0x40048008))) // System PLL control
+#define SCB_PLLSTAT (*(pREG32 (0x4004800C))) // System PLL status
+#define SCB_USBPLLCTRL (*(pREG32 (0x40048010))) // USB PLL control
+#define SCB_USBPLLSTAT (*(pREG32 (0x40048014))) // USB PLL status
+#define SCB_SYSOSCCTRL (*(pREG32 (0x40048020))) // System oscillator control
+#define SCB_WDTOSCCTRL (*(pREG32 (0x40048024))) // Watchdog oscillator control
+#define SCB_IRCCTRL (*(pREG32 (0x40048028))) // IRC control
+#define SCB_RESETSTAT (*(pREG32 (0x40048030))) // System reset status register
+#define SCB_PLLCLKSEL (*(pREG32 (0x40048040))) // System PLL clock source select
+#define SCB_PLLCLKUEN (*(pREG32 (0x40048044))) // System PLL clock source update enable
+#define SCB_USBPLLCLKSEL (*(pREG32 (0x40048048))) // USB PLL clock source select
+#define SCB_USBPLLCLKUEN (*(pREG32 (0x4004804C))) // USB PLL clock source update enable
+#define SCB_MAINCLKSEL (*(pREG32 (0x40048070))) // Main clock source select
+#define SCB_MAINCLKUEN (*(pREG32 (0x40048074))) // Main clock source update enable
+#define SCB_SYSAHBCLKDIV (*(pREG32 (0x40048078))) // System AHB clock divider
+#define SCB_SYSAHBCLKCTRL (*(pREG32 (0x40048080))) // System AHB clock control
+#define SCB_SSP0CLKDIV (*(pREG32 (0x40048094))) // SSP0 clock divider
+#define SCB_UARTCLKDIV (*(pREG32 (0x40048098))) // UART clock divider
+#define SCB_SYSTICKCLKDIV (*(pREG32 (0x400480B0))) // System tick clock divider
+#define SCB_USBCLKSEL (*(pREG32 (0x400480C0))) // USB clock source select
+#define SCB_USBCLKUEN (*(pREG32 (0x400480C4))) // USB clock source update enable
+#define SCB_USBCLKDIV (*(pREG32 (0x400480C8))) // USB clock divider
+#define SCB_WDTCLKSEL (*(pREG32 (0x400480D0))) // Watchdog clock source select
+#define SCB_WDTCLKUEN (*(pREG32 (0x400480D4))) // Watchdog clock source update enable
+#define SCB_WDTCLKDIV (*(pREG32 (0x400480D8))) // Watchdog clock divider
+#define SCB_CLKOUTCLKSEL (*(pREG32 (0x400480E0))) // CLKOUT clock source select
+#define SCB_CLKOUTCLKUEN (*(pREG32 (0x400480E4))) // CLKOUT clock source update enable
+#define SCB_CLKOUTCLKDIV (*(pREG32 (0x400480E8))) // CLKOUT clock divider
+#define SCB_PIOPORCAP0 (*(pREG32 (0x40048100))) // POR captured PIO status 0
+#define SCB_PIOPORCAP1 (*(pREG32 (0x40048104))) // POR captured PIO status 1
+#define SCB_BODCTRL (*(pREG32 (0x40048150))) // Brown-out detector control
+#define SCB_SYSTICKCCAL (*(pREG32 (0x40048158))) // System tick counter calibration
+#define SCB_STARTAPRP0 (*(pREG32 (0x40048200))) // Start logic edge control register 0; bottom 32 interrupts
+#define SCB_STARTERP0 (*(pREG32 (0x40048204))) // Start logic signal enable register 0; bottom 32 interrupts
+#define SCB_STARTRSRP0CLR (*(pREG32 (0x40048208))) // Start logic reset register 0; bottom 32 interrupts
+#define SCB_STARTSRP0 (*(pREG32 (0x4004820C))) // Start logic status register 0; bottom 32 interrupts
+#define SCB_STARTAPRP1 (*(pREG32 (0x40048210))) // Start logic edge control register 1; top 8 interrupts
+#define SCB_STARTERP1 (*(pREG32 (0x40048214))) // Start logic signal enable register 1; top 8 interrupts
+#define SCB_STARTRSRP1CLR (*(pREG32 (0x40048218))) // Start logic reset register 1; top 8 interrupts
+#define SCB_STARTSRP1 (*(pREG32 (0x4004821C))) // Start logic status register 1; top 8 interrupts
+#define SCB_PDSLEEPCFG (*(pREG32 (0x40048230))) // Power-down states in Deep-sleep mode
+#define SCB_PDAWAKECFG (*(pREG32 (0x40048234))) // Power-down states after wake-up from Deep-sleep mode
+#define SCB_PDRUNCFG (*(pREG32 (0x40048238))) // Power-down configuration register
+#define SCB_DEVICEID (*(pREG32 (0x400483F4))) // Device ID
+#define SCB_MMFAR (*(pREG32 (0xE000ED34))) // Memory Manage Address Register (MMAR)
+#define SCB_BFAR (*(pREG32 (0xE000ED38))) // Bus Fault Manage Address Register (BFAR)
+#define SCB_DEMCR (*(pREG32 (0xE000EDFC)))
+
+/* CPU ID Base Register */
+#define SCB_CPUID (*(pREG32 (0xE000ED00)))
+#define SCB_CPUID_REVISION_MASK ((unsigned int) 0x0000000F) // Revision Code
+#define SCB_CPUID_PARTNO_MASK ((unsigned int) 0x0000FFF0) // Part Number
+#define SCB_CPUID_CONSTANT_MASK ((unsigned int) 0x000F0000) // Constant
+#define SCB_CPUID_VARIANT_MASK ((unsigned int) 0x00F00000) // Variant
+#define SCB_CPUID_IMPLEMENTER_MASK ((unsigned int) 0xFF000000) // Implementer
+
+/* System Control Register */
+
+#define SCB_SCR (*(pREG32 (0xE000ED10)))
+#define SCB_SCR_SLEEPONEXIT_MASK ((unsigned int) 0x00000002) // Enable sleep on exit
+#define SCB_SCR_SLEEPONEXIT ((unsigned int) 0x00000002)
+#define SCB_SCR_SLEEPDEEP_MASK ((unsigned int) 0x00000004)
+#define SCB_SCR_SLEEPDEEP ((unsigned int) 0x00000004) // Enable deep sleep
+#define SCB_SCR_SEVONPEND_MASK ((unsigned int) 0x00000010) // Wake up from WFE is new int is pended regardless of priority
+#define SCB_SCR_SEVONPEND ((unsigned int) 0x00000010)
+
+/* Application Interrupt and Reset Control Register */
+
+#define SCB_AIRCR (*(pREG32 (0xE000ED0C)))
+#define SCB_AIRCR_VECTKEY_VALUE ((unsigned int) 0x05FA0000) // Vect key needs to be set to 05FA for reset to work
+#define SCB_AIRCR_VECTKEY_MASK ((unsigned int) 0xFFFF0000)
+#define SCB_AIRCR_ENDIANESS ((unsigned int) 0x00008000) // Read Endianness (1=Big, 0=Little)
+#define SCB_AIRCR_ENDIANESS_MASK ((unsigned int) 0x00008000)
+#define SCB_AIRCR_PRIGROUP ((unsigned int) 0x00000700)
+#define SCB_AIRCR_PRIGROUP_MASK ((unsigned int) 0x00000700)
+#define SCB_AIRCR_SYSRESETREQ ((unsigned int) 0x00000004) // Request system reset
+#define SCB_AIRCR_SYSRESETREQ_MASK ((unsigned int) 0x00000004)
+#define SCB_AIRCR_VECTCLRACTIVE ((unsigned int) 0x00000002) // Used to prevent accidental reset
+#define SCB_AIRCR_VECTCLRACTIVE_MASK ((unsigned int) 0x00000002)
+#define SCB_AIRCR_VECTRESET ((unsigned int) 0x00000001)
+#define SCB_AIRCR_VECTRESET_MASK ((unsigned int) 0x00000001)
+
+/* Memory Management Fault Status Register */
+
+#define SCB_MMFSR (*(pREG32 (0xE000ED28)))
+#define SCB_MMFSR_IACCVIOL_MASK ((unsigned int) 0x00000001) // Instruction access violation
+#define SCB_MMFSR_IACCVIOL ((unsigned int) 0x00000001)
+#define SCB_MMFSR_DACCVIOL_MASK ((unsigned int) 0x00000002) // Data access violation
+#define SCB_MMFSR_DACCVIOL ((unsigned int) 0x00000002)
+#define SCB_MMFSR_MUNSTKERR_MASK ((unsigned int) 0x00000008) // Unstacking error
+#define SCB_MMFSR_MUNSTKERR ((unsigned int) 0x00000008)
+#define SCB_MMFSR_MSTKERR_MASK ((unsigned int) 0x00000010) // Stacking error
+#define SCB_MMFSR_MSTKERR ((unsigned int) 0x00000010)
+#define SCB_MMFSR_MMARVALID_MASK ((unsigned int) 0x00000080) // Indicates MMAR is valid
+#define SCB_MMFSR_MMARVALID ((unsigned int) 0x00000080)
+
+/* Bus Fault Status Register */
+
+#define SCB_BFSR (*(pREG32 (0xE000ED29)))
+#define SCB_BFSR_IBUSERR_MASK ((unsigned int) 0x00000001) // Instruction access violation
+#define SCB_BFSR_IBUSERR ((unsigned int) 0x00000001)
+#define SCB_BFSR_PRECISERR_MASK ((unsigned int) 0x00000002) // Precise data access violation
+#define SCB_BFSR_PRECISERR ((unsigned int) 0x00000002)
+#define SCB_BFSR_IMPRECISERR_MASK ((unsigned int) 0x00000004) // Imprecise data access violation
+#define SCB_BFSR_IMPRECISERR ((unsigned int) 0x00000004)
+#define SCB_BFSR_UNSTKERR_MASK ((unsigned int) 0x00000008) // Unstacking error
+#define SCB_BFSR_UNSTKERR ((unsigned int) 0x00000008)
+#define SCB_BFSR_STKERR_MASK ((unsigned int) 0x00000010) // Stacking error
+#define SCB_BFSR_STKERR ((unsigned int) 0x00000010)
+#define SCB_BFSR_BFARVALID_MASK ((unsigned int) 0x00000080) // Indicates BFAR is valid
+#define SCB_BFSR_BFARVALID ((unsigned int) 0x00000080)
+
+/* Usage Fault Status Register */
+
+#define SCB_UFSR (*(pREG32 (0xE000ED2A)))
+#define SCB_UFSR_UNDEFINSTR_MASK ((unsigned int) 0x00000001) // Attempt to execute an undefined instruction
+#define SCB_UFSR_UNDEFINSTR ((unsigned int) 0x00000001)
+#define SCB_UFSR_INVSTATE_MASK ((unsigned int) 0x00000002) // Attempt to switch to invalid state (i.e. ARM)
+#define SCB_UFSR_INVSTATE ((unsigned int) 0x00000002)
+#define SCB_UFSR_INVPC_MASK ((unsigned int) 0x00000004) // Attempt to do exception with bad value in EXC_RETURN number
+#define SCB_UFSR_INVPC ((unsigned int) 0x00000004)
+#define SCB_UFSR_NOCP_MASK ((unsigned int) 0x00000008) // Attempt to execute a coprocessor instruction
+#define SCB_UFSR_NOCP ((unsigned int) 0x00000008)
+#define SCB_UFSR_UNALIGNED_MASK ((unsigned int) 0x00000100) // Unaligned access
+#define SCB_UFSR_UNALIGNED ((unsigned int) 0x00000100)
+#define SCB_UFSR_DIVBYZERO_MASK ((unsigned int) 0x00000200) // Divide by zero
+#define SCB_UFSR_DIVBYZERO ((unsigned int) 0x00000200)
+
+/* Hard Fault Status Register */
+
+#define SCB_HFSR (*(pREG32 (0xE000ED2C)))
+#define SCB_HFSR_VECTTBL_MASK ((unsigned int) 0x00000002) // Hard fault caused by failed vector fetch
+#define SCB_HFSR_VECTTBL ((unsigned int) 0x00000002)
+#define SCB_HFSR_FORCED_MASK ((unsigned int) 0x40000000) // Hard fault taken because of bus/mem man/usage fault
+#define SCB_HFSR_FORCED ((unsigned int) 0x40000000)
+#define SCB_HFSR_DEBUGEVT_MASK ((unsigned int) 0x80000000) // Hard fault triggered by debug event
+#define SCB_HFSR_DEBUGEVT ((unsigned int) 0x80000000)
+
+/* Debug Fault Status Register */
+
+#define SCB_DFSR (*(pREG32 (0xE000ED30)))
+#define SCB_DFSR_HALTED_MASK ((unsigned int) 0x00000001) // Halt requested in NVIC
+#define SCB_DFSR_HALTED ((unsigned int) 0x00000001)
+#define SCB_DFSR_BKPT_MASK ((unsigned int) 0x00000002) // BKPT instruction executed
+#define SCB_DFSR_BKPT ((unsigned int) 0x00000002)
+#define SCB_DFSR_DWTTRAP_MASK ((unsigned int) 0x00000004) // DWT match occurred
+#define SCB_DFSR_DWTTRAP ((unsigned int) 0x00000004)
+#define SCB_DFSR_VCATCH_MASK ((unsigned int) 0x00000008) // Vector fetch occurred
+#define SCB_DFSR_VCATCH ((unsigned int) 0x00000008)
+#define SCB_DFSR_EXTERNAL_MASK ((unsigned int) 0x00000010) // EDBGRQ signal asserted
+#define SCB_DFSR_EXTERNAL ((unsigned int) 0x00000010)
+
+/* SCB_MEMREMAP (System memory remap register)
+ The system memory remap register selects whether the ARM interrupt vectors are read
+ from the boot ROM, the flash, or the SRAM. */
+
+#define SCB_MEMREMAP_MODE_BOOTLOADER ((unsigned int) 0x00000000) // Interrupt vectors are remapped to Boot ROM
+#define SCB_MEMREMAP_MODE_RAM ((unsigned int) 0x00000001) // Interrupt vectors are remapped to Static ROM
+#define SCB_MEMREMAP_MODE_FLASH ((unsigned int) 0x00000002) // Interrupt vectors are not remapped and reside in Flash
+#define SCB_MEMREMAP_MASK ((unsigned int) 0x00000003)
+
+/* PRESETCTRL (Peripheral reset control register) */
+
+#define SCB_PRESETCTRL_SSP0_RESETENABLED ((unsigned int) 0x00000000)
+#define SCB_PRESETCTRL_SSP0_RESETDISABLED ((unsigned int) 0x00000001)
+#define SCB_PRESETCTRL_SSP0_MASK ((unsigned int) 0x00000001)
+#define SCB_PRESETCTRL_I2C_RESETENABLED ((unsigned int) 0x00000000)
+#define SCB_PRESETCTRL_I2C_RESETDISABLED ((unsigned int) 0x00000002)
+#define SCB_PRESETCTRL_I2C_MASK ((unsigned int) 0x00000002)
+
+/* SYSPLLCTRL (System PLL control register)
+ This register connects and enables the system PLL and configures the PLL multiplier and
+ divider values. The PLL accepts an input frequency from 10 MHz to 25 MHz from various
+ clock sources. The input frequency is multiplied up to a high frequency, then divided down
+ to provide the actual clock used by the CPU, peripherals, and optionally the USB
+ subsystem. Note that the USB subsystem has its own dedicated PLL. The PLL can
+ produce a clock up to the maximum allowed for the CPU, which is 72 MHz. */
+
+#define SCB_PLLCTRL_MULT_1 ((unsigned int) 0x00000000)
+#define SCB_PLLCTRL_MULT_2 ((unsigned int) 0x00000001)
+#define SCB_PLLCTRL_MULT_3 ((unsigned int) 0x00000002)
+#define SCB_PLLCTRL_MULT_4 ((unsigned int) 0x00000003)
+#define SCB_PLLCTRL_MULT_5 ((unsigned int) 0x00000004)
+#define SCB_PLLCTRL_MULT_6 ((unsigned int) 0x00000005)
+#define SCB_PLLCTRL_MULT_7 ((unsigned int) 0x00000006)
+#define SCB_PLLCTRL_MULT_8 ((unsigned int) 0x00000007)
+#define SCB_PLLCTRL_MULT_9 ((unsigned int) 0x00000008)
+#define SCB_PLLCTRL_MULT_10 ((unsigned int) 0x00000009)
+#define SCB_PLLCTRL_MULT_11 ((unsigned int) 0x0000000A)
+#define SCB_PLLCTRL_MULT_12 ((unsigned int) 0x0000000B)
+#define SCB_PLLCTRL_MULT_13 ((unsigned int) 0x0000000C)
+#define SCB_PLLCTRL_MULT_14 ((unsigned int) 0x0000000D)
+#define SCB_PLLCTRL_MULT_15 ((unsigned int) 0x0000000E)
+#define SCB_PLLCTRL_MULT_16 ((unsigned int) 0x0000000F)
+#define SCB_PLLCTRL_MULT_17 ((unsigned int) 0x00000010)
+#define SCB_PLLCTRL_MULT_18 ((unsigned int) 0x00000011)
+#define SCB_PLLCTRL_MULT_19 ((unsigned int) 0x00000012)
+#define SCB_PLLCTRL_MULT_20 ((unsigned int) 0x00000013)
+#define SCB_PLLCTRL_MULT_21 ((unsigned int) 0x00000014)
+#define SCB_PLLCTRL_MULT_22 ((unsigned int) 0x00000015)
+#define SCB_PLLCTRL_MULT_23 ((unsigned int) 0x00000016)
+#define SCB_PLLCTRL_MULT_24 ((unsigned int) 0x00000017)
+#define SCB_PLLCTRL_MULT_25 ((unsigned int) 0x00000018)
+#define SCB_PLLCTRL_MULT_26 ((unsigned int) 0x00000019)
+#define SCB_PLLCTRL_MULT_27 ((unsigned int) 0x0000001A)
+#define SCB_PLLCTRL_MULT_28 ((unsigned int) 0x0000001B)
+#define SCB_PLLCTRL_MULT_29 ((unsigned int) 0x0000001C)
+#define SCB_PLLCTRL_MULT_30 ((unsigned int) 0x0000001D)
+#define SCB_PLLCTRL_MULT_31 ((unsigned int) 0x0000001E)
+#define SCB_PLLCTRL_MULT_32 ((unsigned int) 0x0000001F)
+#define SCB_PLLCTRL_MULT_MASK ((unsigned int) 0x0000001F)
+#define SCB_PLLCTRL_DIV_2 ((unsigned int) 0x00000000)
+#define SCB_PLLCTRL_DIV_4 ((unsigned int) 0x00000020)
+#define SCB_PLLCTRL_DIV_8 ((unsigned int) 0x00000040)
+#define SCB_PLLCTRL_DIV_16 ((unsigned int) 0x00000060)
+#define SCB_PLLCTRL_DIV_BIT (5)
+#define SCB_PLLCTRL_DIV_MASK ((unsigned int) 0x00000060)
+#define SCB_PLLCTRL_DIRECT_MASK ((unsigned int) 0x00000080) // Direct CCO clock output control
+#define SCB_PLLCTRL_BYPASS_MASK ((unsigned int) 0x00000100) // Input clock bypass control
+#define SCB_PLLCTRL_MASK ((unsigned int) 0x000001FF)
+
+/* SYSPLLSTAT (System PLL status register)
+ This register is a Read-only register and supplies the PLL lock status */
+
+#define SCB_PLLSTAT_LOCK ((unsigned int) 0x00000001) // 0 = PLL not locked, 1 = PLL locked
+#define SCB_PLLSTAT_LOCK_MASK ((unsigned int) 0x00000001)
+
+/* USBPLLCTRL (USB PLL control register)
+ The USB PLL is identical to the system PLL and is used to provide a dedicated clock to
+ the USB block if available. The USB PLL should be always connected to the system
+ oscillator to produce a stable USB clock. */
+
+#define SCB_USBPLLCTRL_MULT_1 ((unsigned int) 0x00000000)
+#define SCB_USBPLLCTRL_MULT_2 ((unsigned int) 0x00000001)
+#define SCB_USBPLLCTRL_MULT_3 ((unsigned int) 0x00000002)
+#define SCB_USBPLLCTRL_MULT_4 ((unsigned int) 0x00000003)
+#define SCB_USBPLLCTRL_MULT_5 ((unsigned int) 0x00000004)
+#define SCB_USBPLLCTRL_MULT_6 ((unsigned int) 0x00000005)
+#define SCB_USBPLLCTRL_MULT_7 ((unsigned int) 0x00000006)
+#define SCB_USBPLLCTRL_MULT_8 ((unsigned int) 0x00000007)
+#define SCB_USBPLLCTRL_MULT_9 ((unsigned int) 0x00000008)
+#define SCB_USBPLLCTRL_MULT_10 ((unsigned int) 0x00000009)
+#define SCB_USBPLLCTRL_MULT_11 ((unsigned int) 0x0000000A)
+#define SCB_USBPLLCTRL_MULT_12 ((unsigned int) 0x0000000B)
+#define SCB_USBPLLCTRL_MULT_13 ((unsigned int) 0x0000000C)
+#define SCB_USBPLLCTRL_MULT_14 ((unsigned int) 0x0000000D)
+#define SCB_USBPLLCTRL_MULT_15 ((unsigned int) 0x0000000E)
+#define SCB_USBPLLCTRL_MULT_16 ((unsigned int) 0x0000000F)
+#define SCB_USBPLLCTRL_MULT_17 ((unsigned int) 0x00000010)
+#define SCB_USBPLLCTRL_MULT_18 ((unsigned int) 0x00000011)
+#define SCB_USBPLLCTRL_MULT_19 ((unsigned int) 0x00000012)
+#define SCB_USBPLLCTRL_MULT_20 ((unsigned int) 0x00000013)
+#define SCB_USBPLLCTRL_MULT_21 ((unsigned int) 0x00000014)
+#define SCB_USBPLLCTRL_MULT_22 ((unsigned int) 0x00000015)
+#define SCB_USBPLLCTRL_MULT_23 ((unsigned int) 0x00000016)
+#define SCB_USBPLLCTRL_MULT_24 ((unsigned int) 0x00000017)
+#define SCB_USBPLLCTRL_MULT_25 ((unsigned int) 0x00000018)
+#define SCB_USBPLLCTRL_MULT_26 ((unsigned int) 0x00000019)
+#define SCB_USBPLLCTRL_MULT_27 ((unsigned int) 0x0000001A)
+#define SCB_USBPLLCTRL_MULT_28 ((unsigned int) 0x0000001B)
+#define SCB_USBPLLCTRL_MULT_29 ((unsigned int) 0x0000001C)
+#define SCB_USBPLLCTRL_MULT_30 ((unsigned int) 0x0000001D)
+#define SCB_USBPLLCTRL_MULT_31 ((unsigned int) 0x0000001E)
+#define SCB_USBPLLCTRL_MULT_32 ((unsigned int) 0x0000001F)
+#define SCB_USBPLLCTRL_MULT_MASK ((unsigned int) 0x0000001F)
+#define SCB_USBPLLCTRL_DIV_2 ((unsigned int) 0x00000000)
+#define SCB_USBPLLCTRL_DIV_4 ((unsigned int) 0x00000020)
+#define SCB_USBPLLCTRL_DIV_8 ((unsigned int) 0x00000040)
+#define SCB_USBPLLCTRL_DIV_16 ((unsigned int) 0x00000060)
+#define SCB_USBPLLCTRL_DIV_BIT (5)
+#define SCB_USBPLLCTRL_DIV_MASK ((unsigned int) 0x00000060)
+#define SCB_USBPLLCTRL_DIRECT_MASK ((unsigned int) 0x00000080) // Direct CCO clock output control
+#define SCB_USBPLLCTRL_BYPASS_MASK ((unsigned int) 0x00000100) // Input clock bypass control
+#define SCB_USBPLLCTRL_MASK ((unsigned int) 0x000001FF)
+
+/* USBPLLSTAT (System PLL status register)
+ This register is a Read-only register and supplies the PLL lock status. */
+
+#define SCB_USBPLLSTAT_LOCK ((unsigned int) 0x00000001) // 0 = PLL not locked, 1 = PLL locked
+#define SCB_USBPLLSTAT_LOCK_MASK ((unsigned int) 0x00000001)
+
+/* SYSOSCCTRL (System oscillator control register)
+ This register configures the frequency range for the system oscillator. */
+
+#define SCB_SYSOSCCTRL_BYPASS_DISABLED ((unsigned int) 0x00000000) // Oscillator is not bypassed.
+#define SCB_SYSOSCCTRL_BYPASS_ENABLED ((unsigned int) 0x00000001) // Bypass enabled
+#define SCB_SYSOSCCTRL_BYPASS_MASK ((unsigned int) 0x00000001)
+#define SCB_SYSOSCCTRL_FREQRANGE_1TO20MHZ ((unsigned int) 0x00000000) // 1-20 MHz frequency range
+#define SCB_SYSOSCCTRL_FREQRANGE_15TO25MHZ ((unsigned int) 0x00000002) // 15-25 MHz frequency range
+#define SCB_SYSOSCCTRL_FREQRANGE_MASK ((unsigned int) 0x00000002)
+
+/* WDTOSCTRL (Watchdog oscillator control register)
+ This register configures the watchdog oscillator. The oscillator consists of an analog and a
+ digital part. The analog part contains the oscillator function and generates an analog clock
+ (Fclkana). With the digital part, the analog output clock (Fclkana) can be divided to the
+ required output clock frequency wdt_osc_clk. The analog output frequency (Fclkana) can
+ be adjusted with the FREQSEL bits between 500 kHz and 3.7 MHz. With the digital part
+ Fclkana will be divided (divider ratios = 2, 4,...,64) to wdt_osc_clk using the DIVSEL bits.*/
+
+#define SCB_WDTOSCCTRL_DIVSEL_DIV2 ((unsigned int) 0x00000000) // Reset value
+#define SCB_WDTOSCCTRL_DIVSEL_DIV4 ((unsigned int) 0x00000001)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV6 ((unsigned int) 0x00000002)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV8 ((unsigned int) 0x00000003)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV10 ((unsigned int) 0x00000004)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV12 ((unsigned int) 0x00000005)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV14 ((unsigned int) 0x00000006)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV16 ((unsigned int) 0x00000007)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV18 ((unsigned int) 0x00000008)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV20 ((unsigned int) 0x00000009)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV22 ((unsigned int) 0x0000000A)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV24 ((unsigned int) 0x0000000B)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV26 ((unsigned int) 0x0000000C)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV28 ((unsigned int) 0x0000000D)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV30 ((unsigned int) 0x0000000E)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV32 ((unsigned int) 0x0000000F)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV34 ((unsigned int) 0x00000010)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV36 ((unsigned int) 0x00000011)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV38 ((unsigned int) 0x00000012)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV40 ((unsigned int) 0x00000013)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV42 ((unsigned int) 0x00000014)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV44 ((unsigned int) 0x00000015)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV46 ((unsigned int) 0x00000016)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV48 ((unsigned int) 0x00000017)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV50 ((unsigned int) 0x00000018)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV52 ((unsigned int) 0x00000019)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV54 ((unsigned int) 0x0000001A)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV56 ((unsigned int) 0x0000001B)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV58 ((unsigned int) 0x0000001C)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV60 ((unsigned int) 0x0000001D)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV62 ((unsigned int) 0x0000001E)
+#define SCB_WDTOSCCTRL_DIVSEL_DIV64 ((unsigned int) 0x0000001F)
+#define SCB_WDTOSCCTRL_DIVSEL_MASK ((unsigned int) 0x0000001F)
+#define SCB_WDTOSCCTRL_FREQSEL_0_5MHZ ((unsigned int) 0x00000020)
+#define SCB_WDTOSCCTRL_FREQSEL_0_8MHZ ((unsigned int) 0x00000040)
+#define SCB_WDTOSCCTRL_FREQSEL_1_1MHZ ((unsigned int) 0x00000060)
+#define SCB_WDTOSCCTRL_FREQSEL_1_4MHZ ((unsigned int) 0x00000080)
+#define SCB_WDTOSCCTRL_FREQSEL_1_6MHZ ((unsigned int) 0x000000A0) // Reset value
+#define SCB_WDTOSCCTRL_FREQSEL_1_8MHZ ((unsigned int) 0x000000C0)
+#define SCB_WDTOSCCTRL_FREQSEL_2_0MHZ ((unsigned int) 0x000000E0)
+#define SCB_WDTOSCCTRL_FREQSEL_2_2MHZ ((unsigned int) 0x00000100)
+#define SCB_WDTOSCCTRL_FREQSEL_2_4MHZ ((unsigned int) 0x00000120)
+#define SCB_WDTOSCCTRL_FREQSEL_2_6MHZ ((unsigned int) 0x00000140)
+#define SCB_WDTOSCCTRL_FREQSEL_2_7MHZ ((unsigned int) 0x00000160)
+#define SCB_WDTOSCCTRL_FREQSEL_2_9MHZ ((unsigned int) 0x00000180)
+#define SCB_WDTOSCCTRL_FREQSEL_3_1MHZ ((unsigned int) 0x000001A0)
+#define SCB_WDTOSCCTRL_FREQSEL_3_2MHZ ((unsigned int) 0x000001C0)
+#define SCB_WDTOSCCTRL_FREQSEL_3_4MHZ ((unsigned int) 0x000001E0)
+#define SCB_WDTOSCCTRL_FREQSEL_MASK ((unsigned int) 0x000001E0)
+
+/* IRCCTRL (Internal resonant crystal control register)
+ This register is used to trim the on-chip 12 MHz oscillator. The trim value is factory-preset
+ and written by the boot code on start-up. */
+
+#define SCB_IRCCTRL_MASK ((unsigned int) 0x000000FF)
+
+/* SYSRSTSTAT (System reset status register)
+ The SYSRSTSTAT register shows the source of the latest reset event. The bits are
+ cleared by writing a one to any of the bits. The POR event clears all other bits in this
+ register, but if another reset signal (e.g., EXTRST) remains asserted after the POR signal
+ is negated, then its bit is set to detected. */
+
+#define SCB_RESETSTAT_POR_MASK ((unsigned int) 0x00000001) // POR reset status
+#define SCB_RESETSTAT_EXTRST_MASK ((unsigned int) 0x00000002) // Status of the external reset pin
+#define SCB_RESETSTAT_WDT_MASK ((unsigned int) 0x00000004) // Status of the watchdog reset
+#define SCB_RESETSTAT_BOD_MASK ((unsigned int) 0x00000008) // Status of the brown-out detect reset
+#define SCB_RESETSTAT_SYSRST_MASK ((unsigned int) 0x00000010) // Status of the software system reset
+#define SCB_RESETSTAT_MASK ((unsigned int) 0x00000010)
+
+/* SYSPLLCLKSEL (System PLL clock source select register)
+ This register selects the clock source for the system PLL. The SYSPLLCLKUEN register
+ must be toggled from LOW to HIGH for the update to take effect.
+ Remark: The system oscillator must be selected if the system PLL is used to generate a
+ 48 MHz clock to the USB block.
+*/
+
+#define SCB_CLKSEL_SOURCE_INTERNALOSC ((unsigned int) 0x00000000)
+#define SCB_CLKSEL_SOURCE_MAINOSC ((unsigned int) 0x00000001)
+#define SCB_CLKSEL_SOURCE_RTCOSC ((unsigned int) 0x00000002)
+#define SCB_CLKSEL_SOURCE_MASK ((unsigned int) 0x00000002)
+
+/* SYSPLLUEN (System PLL clock source update enable register)
+ This register updates the clock source of the system PLL with the new input clock after the
+ SYSPLLCLKSEL register has been written to. In order for the update to take effect, first
+ write a zero to the SYSPLLUEN register and then write a one to SYSPLLUEN. */
+
+#define SCB_PLLCLKUEN_DISABLE ((unsigned int) 0x00000000)
+#define SCB_PLLCLKUEN_UPDATE ((unsigned int) 0x00000001)
+#define SCB_PLLCLKUEN_MASK ((unsigned int) 0x00000001)
+
+/* USBPLLCLKSEL (USB PLL clock source select register)
+ his register selects the clock source for the dedicated USB PLL. The SYSPLLCLKUEN
+ register must be toggled from LOW to HIGH for the update to take effect.
+ Remark: Always select the system oscillator to produce a stable 48 MHz clock for
+ the USB block. */
+
+#define SCB_USBPLLCLKSEL_SOURCE_INTERNALOSC ((unsigned int) 0x00000000) // Do NOT use (even though this is the default value)
+#define SCB_USBPLLCLKSEL_SOURCE_MAINOSC ((unsigned int) 0x00000001) // Main oscillator should always be used for USB clock
+#define SCB_USBPLLCLKSEL_SOURCE_MASK ((unsigned int) 0x00000002)
+
+/* USBPLLUEN (USB PLL clock source update enable register)
+ This register updates the clock source of the USB PLL with the new input clock after the
+ USBPLLCLKSEL register has been written to. In order for the update to take effect at the
+ USB PLL input, first write a zero to the USBPLLUEN register and then write a one to
+ USBPLLUEN. */
+
+#define SCB_USBPLLCLKUEN_DISABLE ((unsigned int) 0x00000000)
+#define SCB_USBPLLCLKUEN_UPDATE ((unsigned int) 0x00000001)
+#define SCB_USBPLLCLKUEN_MASK ((unsigned int) 0x00000001)
+
+/* MAINCLKSEL (Main clock source select register)
+ This register selects the main system clock which can be either the output from the
+ system PLL or the IRC, system, or Watchdog oscillators directly. The main system clock
+ clocks the core, the peripherals, and optionally the USB block.
+ The MAINCLKUEN register must be toggled from LOW to HIGH for the update to take effect.*/
+
+#define SCB_MAINCLKSEL_SOURCE_INTERNALOSC ((unsigned int) 0x00000000) // Use IRC oscillator for main clock source
+#define SCB_MAINCLKSEL_SOURCE_INPUTCLOCK ((unsigned int) 0x00000001) // Use Input clock to system PLL for main clock source
+#define SCB_MAINCLKSEL_SOURCE_WDTOSC ((unsigned int) 0x00000002) // Use watchdog oscillator for main clock source
+#define SCB_MAINCLKSEL_SOURCE_SYSPLLCLKOUT ((unsigned int) 0x00000003) // Use system PLL clock out for main clock source
+#define SCB_MAINCLKSEL_MASK ((unsigned int) 0x00000003)
+
+/* MAINCLKUEN (Main clock source update enable register)
+ This register updates the clock source of the main clock with the new input clock after the
+ MAINCLKSEL register has been written to. In order for the update to take effect, first write
+ a zero to the MAINUEN register and then write a one to MAINCLKUEN. */
+
+#define SCB_MAINCLKUEN_DISABLE ((unsigned int) 0x00000000)
+#define SCB_MAINCLKUEN_UPDATE ((unsigned int) 0x00000001)
+#define SCB_MAINCLKUEN_MASK ((unsigned int) 0x00000001)
+
+/* SYSAHBCLKDIV (System AHB clock divider register)
+ This register divides the main clock to provide the system clock to the core, memories,
+ and the peripherals. The system clock can be shut down completely by setting the DIV
+ bits to 0x0. */
+
+#define SCB_SYSAHBCLKDIV_DISABLE ((unsigned int) 0x00000000) // 0 will shut the system clock down completely
+#define SCB_SYSAHBCLKDIV_DIV1 ((unsigned int) 0x00000001) // 1, 2 or 4 are the most common values
+#define SCB_SYSAHBCLKDIV_DIV2 ((unsigned int) 0x00000002)
+#define SCB_SYSAHBCLKDIV_DIV4 ((unsigned int) 0x00000004)
+#define SCB_SYSAHBCLKDIV_MASK ((unsigned int) 0x000000FF) // AHB clock divider can be from 0 to 255
+
+/* AHBCLKCTRL (System AHB clock control register)
+ The AHBCLKCTRL register enables the clocks to individual system and peripheral blocks.
+ The system clock (sys_ahb_clk[0], bit 0 in the AHBCLKCTRL register) provides the clock
+ for the AHB to APB bridge, the AHB matrix, the ARM Cortex-M3, the Syscon block, and
+ the PMU. This clock cannot be disabled. */
+
+#define SCB_SYSAHBCLKCTRL_SYS ((unsigned int) 0x00000001) // Enables clock for AHB and APB bridges, FCLK, HCLK, SysCon and PMU
+#define SCB_SYSAHBCLKCTRL_SYS_MASK ((unsigned int) 0x00000001)
+#define SCB_SYSAHBCLKCTRL_ROM ((unsigned int) 0x00000002) // Enables clock for ROM
+#define SCB_SYSAHBCLKCTRL_ROM_MASK ((unsigned int) 0x00000002)
+#define SCB_SYSAHBCLKCTRL_RAM ((unsigned int) 0x00000004) // Enables clock for SRAM
+#define SCB_SYSAHBCLKCTRL_RAM_MASK ((unsigned int) 0x00000004)
+#define SCB_SYSAHBCLKCTRL_FLASH1 ((unsigned int) 0x00000008) // Enables clock for flash1
+#define SCB_SYSAHBCLKCTRL_FLASH1_MASK ((unsigned int) 0x00000008)
+#define SCB_SYSAHBCLKCTRL_FLASH2 ((unsigned int) 0x00000010) // Enables clock for flash2
+#define SCB_SYSAHBCLKCTRL_FLASH2_MASK ((unsigned int) 0x00000010)
+#define SCB_SYSAHBCLKCTRL_I2C ((unsigned int) 0x00000020) // Enables clock for I2C
+#define SCB_SYSAHBCLKCTRL_I2C_MASK ((unsigned int) 0x00000020)
+#define SCB_SYSAHBCLKCTRL_GPIO ((unsigned int) 0x00000040) // Enables clock for GPIO
+#define SCB_SYSAHBCLKCTRL_GPIO_MASK ((unsigned int) 0x00000040)
+#define SCB_SYSAHBCLKCTRL_CT16B0 ((unsigned int) 0x00000080) // Enables clock for 16-bit counter/timer 0
+#define SCB_SYSAHBCLKCTRL_CT16B0_MASK ((unsigned int) 0x00000080)
+#define SCB_SYSAHBCLKCTRL_CT16B1 ((unsigned int) 0x00000100) // Enables clock for 16-bit counter/timer 1
+#define SCB_SYSAHBCLKCTRL_CT16B1_MASK ((unsigned int) 0x00000100)
+#define SCB_SYSAHBCLKCTRL_CT32B0 ((unsigned int) 0x00000200) // Enables clock for 32-bit counter/timer 0
+#define SCB_SYSAHBCLKCTRL_CT32B0_MASK ((unsigned int) 0x00000200)
+#define SCB_SYSAHBCLKCTRL_CT32B1 ((unsigned int) 0x00000400) // Enables clock for 32-bit counter/timer 1
+#define SCB_SYSAHBCLKCTRL_CT32B1_MASK ((unsigned int) 0x00000400)
+#define SCB_SYSAHBCLKCTRL_SSP0 ((unsigned int) 0x00000800) // Enables clock for SSP0
+#define SCB_SYSAHBCLKCTRL_SSP0_MASK ((unsigned int) 0x00000800)
+#define SCB_SYSAHBCLKCTRL_UART ((unsigned int) 0x00001000) // Enables clock for UART. UART pins must be configured
+#define SCB_SYSAHBCLKCTRL_UART_MASK ((unsigned int) 0x00001000) // in the IOCON block before the UART clock can be enabled.
+#define SCB_SYSAHBCLKCTRL_ADC ((unsigned int) 0x00002000) // Enables clock for ADC
+#define SCB_SYSAHBCLKCTRL_ADC_MASK ((unsigned int) 0x00002000)
+#define SCB_SYSAHBCLKCTRL_USB_REG ((unsigned int) 0x00004000) // Enables clock for USB_REG
+#define SCB_SYSAHBCLKCTRL_USB_REG_MASK ((unsigned int) 0x00004000)
+#define SCB_SYSAHBCLKCTRL_WDT ((unsigned int) 0x00008000) // Enables clock for watchdog timer
+#define SCB_SYSAHBCLKCTRL_WDT_MASK ((unsigned int) 0x00008000)
+#define SCB_SYSAHBCLKCTRL_IOCON ((unsigned int) 0x00010000) // Enables clock for IO configuration block
+#define SCB_SYSAHBCLKCTRL_IOCON_MASK ((unsigned int) 0x00010000)
+#define SCB_SYSAHBCLKCTRL_ALL_MASK ((unsigned int) 0x0001FFFF)
+
+/* SSP0CLKDIV (SSP0 clock divider register)
+ This register configures the SSP0 peripheral clock SSP_PCLK. The SSP_PCLK can be
+ shut down by setting the DIV bits to 0x0. It can be set from 1..255. */
+
+#define SCB_SSP0CLKDIV_DISABLE ((unsigned int) 0x00000000)
+#define SCB_SSP0CLKDIV_DIV1 ((unsigned int) 0x00000001) // Divide SSP0 clock by 1 (can be set from 1..255)
+#define SCB_SSP0CLKDIV_DIV2 ((unsigned int) 0x00000002)
+#define SCB_SSP0CLKDIV_DIV3 ((unsigned int) 0x00000003)
+#define SCB_SSP0CLKDIV_DIV4 ((unsigned int) 0x00000004)
+#define SCB_SSP0CLKDIV_DIV6 ((unsigned int) 0x00000006)
+#define SCB_SSP0CLKDIV_DIV10 ((unsigned int) 0x0000000A)
+#define SCB_SSP0CLKDIV_DIV12 ((unsigned int) 0x0000000C)
+#define SCB_SSP0CLKDIV_DIV20 ((unsigned int) 0x00000014)
+#define SCB_SSP0CLKDIV_DIV40 ((unsigned int) 0x00000028)
+#define SCB_SSP0CLKDIV_MASK ((unsigned int) 0x000000FF)
+
+/* UARTCLKDIV (UART clock divider register)
+ This register configures the UART peripheral. The UART_PCLK can be shut down by
+ setting the DIV bits to 0x0.
+ Remark: Note that the UART pins must be configured in the IOCON block before the
+ UART clock can be enabled. */
+
+#define SCB_UARTCLKDIV_DISABLE ((unsigned int) 0x00000000)
+#define SCB_UARTCLKDIV_DIV1 ((unsigned int) 0x00000001) // Divide UART clock by 1 (can be set from 1..255)
+#define SCB_UARTCLKDIV_DIV2 ((unsigned int) 0x00000002)
+#define SCB_UARTCLKDIV_DIV4 ((unsigned int) 0x00000004)
+#define SCB_UARTCLKDIV_MASK ((unsigned int) 0x000000FF)
+
+/* SYSTICKCLKDIV (SYSTICK clock divider register)
+ This register configures the SYSTICK peripheral clock. The SYSTICK timer clock can be
+ shut down by setting the DIV bits to 0x0. */
+
+#define SCB_SYSTICKCLKDIV_DISABLE ((unsigned int) 0x00000000)
+#define SCB_SYSTICKCLKDIV_DIV1 ((unsigned int) 0x00000001) // Divide SYSTICK clock by 1 (can be set from 1..255)
+#define SCB_SYSTICKCLKDIV_DIV2 ((unsigned int) 0x00000002) // Divide SYSTICK clock by 2
+#define SCB_SYSTICKCLKDIV_DIV4 ((unsigned int) 0x00000004) // Divide SYSTICK clock by 4
+#define SCB_SYSTICKCLKDIV_DIV8 ((unsigned int) 0x00000008) // Divide SYSTICK clock by 8
+#define SCB_SYSTICKCLKDIV_MASK ((unsigned int) 0x000000FF)
+
+/* USBCLKSEL (USB clock source select register)
+ This register selects the clock source for the USB usb_clk. The clock source can be either
+ the USB PLL output or the main clock, and the clock can be further divided by the
+ USBCLKDIV register to obtain a 48 MHz clock. The USBCLKUEN register must be toggled from
+ LOW to HIGH for the update to take effect. */
+
+#define SCB_USBCLKSEL_SOURCE_USBPLLOUT ((unsigned int) 0x00000000) // USB PLL output
+#define SCB_USBCLKSEL_SOURCE_INPUTCLOCK ((unsigned int) 0x00000001) // Use the main clock
+#define SCB_USBCLKSEL_MASK ((unsigned int) 0x00000003)
+
+/* USBCLKUEN (USB clock source update enable register)
+ This register updates the clock source of the USB with the new input clock after the
+ USBCLKSEL register has been written to. In order for the update to take effect, first write
+ a zero to the USBCLKUEN register and then write a one to USBCLKUEN. */
+
+#define SCB_USBCLKUEN_DISABLE ((unsigned int) 0x00000000)
+#define SCB_USBCLKUEN_UPDATE ((unsigned int) 0x00000001)
+#define SCB_USBCLKUEN_MASK ((unsigned int) 0x00000001)
+
+/* USBCLKDIV (USB clock divider register)
+ This register allows the USB clock usb_clk to be divided to 48 MHz. The usb_clk can be
+ shut down by setting the DIV bits to 0x0. */
+
+#define SCB_USBCLKDIV_DISABLE ((unsigned int) 0x00000000)
+#define SCB_USBCLKDIV_DIV1 ((unsigned int) 0x00000001) // Divide USB clock by 1 (can be set from 1..255)
+#define SCB_USBCLKDIV_MASK ((unsigned int) 0x000000FF)
+
+/* WDTCLKSEL (WDT clock source select register)
+ This register selects the clock source for the watchdog timer. The WDTCLKUEN register
+ must be toggled from LOW to HIGH for the update to take effect. */
+
+#define SCB_WDTCLKSEL_SOURCE_INTERNALOSC ((unsigned int) 0x00000000) // Use the internal oscillator
+#define SCB_WDTCLKSEL_SOURCE_INPUTCLOCK ((unsigned int) 0x00000001) // Use the main clock
+#define SCB_WDTCLKSEL_SOURCE_WATCHDOGOSC ((unsigned int) 0x00000002) // Use the watchdog oscillator
+#define SCB_WDTCLKSEL_MASK ((unsigned int) 0x00000003)
+
+/* WDTCLKUEN (WDT clock source update enable register)
+ This register updates the clock source of the watchdog timer with the new input clock after
+ the WDTCLKSEL register has been written to. In order for the update to take effect at the
+ input of the watchdog timer, first write a zero to the WDTCLKUEN register and then write
+ a one to WDTCLKUEN. */
+
+#define SCB_WDTCLKUEN_DISABLE ((unsigned int) 0x00000000)
+#define SCB_WDTCLKUEN_UPDATE ((unsigned int) 0x00000001)
+#define SCB_WDTCLKUEN_MASK ((unsigned int) 0x00000001)
+
+/* WDTCLKDIV (WDT clock divider register)
+ This register determines the divider values for the watchdog clock wdt_clk. */
+
+#define SCB_WDTCLKDIV_DISABLE ((unsigned int) 0x00000000)
+#define SCB_WDTCLKDIV_DIV1 ((unsigned int) 0x00000001) // Divide clock by 1 (can be set from 1..255)
+#define SCB_WDTCLKDIV_MASK ((unsigned int) 0x000000FF)
+
+/* CLKOUTCLKSEL (CLKOUT clock source select register)
+ This register configures the clkout_clk signal to be output on the CLKOUT pin. All three
+ oscillators and the main clock can be selected for the clkout_clk clock.
+ The CLKOUTCLKUEN register must be toggled from LOW to HIGH for the update to take effect. */
+
+#define SCB_CLKOUTCLKSEL_SOURCE_USBPLLOUT ((unsigned int) 0x00000000) // USB PLL output
+#define SCB_CLKOUTCLKSEL_SOURCE_INPUTCLOCK ((unsigned int) 0x00000001) // Use the main clock
+#define SCB_CLKOUTCLKSEL_MASK ((unsigned int) 0x00000003)
+
+/* CLKOUTUEN (CLKOUT clock source update enable register)
+ This register updates the clock source of the CLKOUT pin with the new clock after the
+ CLKOUTCLKSEL register has been written to. In order for the update to take effect at the
+ input of the CLKOUT pin, first write a zero to the CLKCLKUEN register and then write a
+ one to CLKCLKUEN. */
+
+#define SCB_CLKOUTCLKUEN_DISABLE ((unsigned int) 0x00000000)
+#define SCB_CLKOUTCLKUEN_UPDATE ((unsigned int) 0x00000001)
+#define SCB_CLKOUTCLKUEN_MASK ((unsigned int) 0x00000001)
+
+/* CLKOUTCLKDIV (CLKOUT clock divider register)
+ This register determines the divider value for the clkout_clk signal on the CLKOUT pin. */
+
+#define SCB_CLKOUTCLKDIV_DISABLE ((unsigned int) 0x00000000)
+#define SCB_CLKOUTCLKDIV_DIV1 ((unsigned int) 0x00000001) // Divide clock by 1 (can be set from 1..255)
+#define SCB_CLKOUTCLKDIV_MASK ((unsigned int) 0x000000FF)
+
+
+/* PIOPORCAP0 (POR captured PIO status register 0)
+ The PIOPORCAP0 register captures the state (HIGH or LOW) of the PIO pins of ports 0,1,
+ and 2 (pins PIO2_0 to PIO2_7) at power-on-reset. Each bit represents the reset state of
+ one GPIO pin. This register is a read-only status register. */
+
+#define SCB_PIOPORCAP0_PIO0_0 ((unsigned int) 0x00000001)
+#define SCB_PIOPORCAP0_PIO0_0_MASK ((unsigned int) 0x00000001)
+#define SCB_PIOPORCAP0_PIO0_1 ((unsigned int) 0x00000002)
+#define SCB_PIOPORCAP0_PIO0_1_MASK ((unsigned int) 0x00000002)
+#define SCB_PIOPORCAP0_PIO0_2 ((unsigned int) 0x00000004)
+#define SCB_PIOPORCAP0_PIO0_2_MASK ((unsigned int) 0x00000004)
+#define SCB_PIOPORCAP0_PIO0_3 ((unsigned int) 0x00000008)
+#define SCB_PIOPORCAP0_PIO0_3_MASK ((unsigned int) 0x00000008)
+#define SCB_PIOPORCAP0_PIO0_4 ((unsigned int) 0x00000010)
+#define SCB_PIOPORCAP0_PIO0_4_MASK ((unsigned int) 0x00000010)
+#define SCB_PIOPORCAP0_PIO0_5 ((unsigned int) 0x00000020)
+#define SCB_PIOPORCAP0_PIO0_5_MASK ((unsigned int) 0x00000020)
+#define SCB_PIOPORCAP0_PIO0_6 ((unsigned int) 0x00000040)
+#define SCB_PIOPORCAP0_PIO0_6_MASK ((unsigned int) 0x00000040)
+#define SCB_PIOPORCAP0_PIO0_7 ((unsigned int) 0x00000080)
+#define SCB_PIOPORCAP0_PIO0_7_MASK ((unsigned int) 0x00000080)
+#define SCB_PIOPORCAP0_PIO0_8 ((unsigned int) 0x00000100)
+#define SCB_PIOPORCAP0_PIO0_8_MASK ((unsigned int) 0x00000100)
+#define SCB_PIOPORCAP0_PIO0_9 ((unsigned int) 0x00000200)
+#define SCB_PIOPORCAP0_PIO0_9_MASK ((unsigned int) 0x00000200)
+#define SCB_PIOPORCAP0_PIO0_10 ((unsigned int) 0x00000400)
+#define SCB_PIOPORCAP0_PIO0_10_MASK ((unsigned int) 0x00000400)
+#define SCB_PIOPORCAP0_PIO0_11 ((unsigned int) 0x00000800)
+#define SCB_PIOPORCAP0_PIO0_11_MASK ((unsigned int) 0x00000800)
+#define SCB_PIOPORCAP0_PIO1_0 ((unsigned int) 0x00001000)
+#define SCB_PIOPORCAP0_PIO1_0_MASK ((unsigned int) 0x00001000)
+#define SCB_PIOPORCAP0_PIO1_1 ((unsigned int) 0x00002000)
+#define SCB_PIOPORCAP0_PIO1_1_MASK ((unsigned int) 0x00002000)
+#define SCB_PIOPORCAP0_PIO1_2 ((unsigned int) 0x00004000)
+#define SCB_PIOPORCAP0_PIO1_2_MASK ((unsigned int) 0x00004000)
+#define SCB_PIOPORCAP0_PIO1_3 ((unsigned int) 0x00008000)
+#define SCB_PIOPORCAP0_PIO1_3_MASK ((unsigned int) 0x00008000)
+#define SCB_PIOPORCAP0_PIO1_4 ((unsigned int) 0x00010000)
+#define SCB_PIOPORCAP0_PIO1_4_MASK ((unsigned int) 0x00010000)
+#define SCB_PIOPORCAP0_PIO1_5 ((unsigned int) 0x00020000)
+#define SCB_PIOPORCAP0_PIO1_5_MASK ((unsigned int) 0x00020000)
+#define SCB_PIOPORCAP0_PIO1_6 ((unsigned int) 0x00040000)
+#define SCB_PIOPORCAP0_PIO1_6_MASK ((unsigned int) 0x00040000)
+#define SCB_PIOPORCAP0_PIO1_7 ((unsigned int) 0x00080000)
+#define SCB_PIOPORCAP0_PIO1_7_MASK ((unsigned int) 0x00080000)
+#define SCB_PIOPORCAP0_PIO1_8 ((unsigned int) 0x00100000)
+#define SCB_PIOPORCAP0_PIO1_8_MASK ((unsigned int) 0x00100000)
+#define SCB_PIOPORCAP0_PIO1_9 ((unsigned int) 0x00200000)
+#define SCB_PIOPORCAP0_PIO1_9_MASK ((unsigned int) 0x00200000)
+#define SCB_PIOPORCAP0_PIO1_10 ((unsigned int) 0x00400000)
+#define SCB_PIOPORCAP0_PIO1_10_MASK ((unsigned int) 0x00400000)
+#define SCB_PIOPORCAP0_PIO1_11 ((unsigned int) 0x00800000)
+#define SCB_PIOPORCAP0_PIO1_11_MASK ((unsigned int) 0x00800000)
+#define SCB_PIOPORCAP0_PIO2_0 ((unsigned int) 0x01000000)
+#define SCB_PIOPORCAP0_PIO2_0_MASK ((unsigned int) 0x01000000)
+#define SCB_PIOPORCAP0_PIO2_1 ((unsigned int) 0x02000000)
+#define SCB_PIOPORCAP0_PIO2_1_MASK ((unsigned int) 0x02000000)
+#define SCB_PIOPORCAP0_PIO2_2 ((unsigned int) 0x04000000)
+#define SCB_PIOPORCAP0_PIO2_2_MASK ((unsigned int) 0x04000000)
+#define SCB_PIOPORCAP0_PIO2_3 ((unsigned int) 0x08000000)
+#define SCB_PIOPORCAP0_PIO2_3_MASK ((unsigned int) 0x08000000)
+#define SCB_PIOPORCAP0_PIO2_4 ((unsigned int) 0x10000000)
+#define SCB_PIOPORCAP0_PIO2_4_MASK ((unsigned int) 0x10000000)
+#define SCB_PIOPORCAP0_PIO2_5 ((unsigned int) 0x20000000)
+#define SCB_PIOPORCAP0_PIO2_5_MASK ((unsigned int) 0x20000000)
+#define SCB_PIOPORCAP0_PIO2_6 ((unsigned int) 0x40000000)
+#define SCB_PIOPORCAP0_PIO2_6_MASK ((unsigned int) 0x40000000)
+#define SCB_PIOPORCAP0_PIO2_7 ((unsigned int) 0x80000000)
+#define SCB_PIOPORCAP0_PIO2_7_MASK ((unsigned int) 0x80000000)
+
+/* PIOPORCAP1 (POR captured PIO status register 1)
+ The PIOPORCAP1 register captures the state (HIGH or LOW) of the PIO pins of port 2
+ (PIO2_8 to PIO2_11) and port 3 at power-on-reset. Each bit represents the reset state of
+ one PIO pin. This register is a read-only status register. */
+
+#define SCB_PIOPORCAP1_PIO2_8 ((unsigned int) 0x00000001)
+#define SCB_PIOPORCAP1_PIO2_8_MASK ((unsigned int) 0x00000001)
+#define SCB_PIOPORCAP1_PIO2_9 ((unsigned int) 0x00000002)
+#define SCB_PIOPORCAP1_PIO2_9_MASK ((unsigned int) 0x00000002)
+#define SCB_PIOPORCAP1_PIO2_10 ((unsigned int) 0x00000004)
+#define SCB_PIOPORCAP1_PIO2_10_MASK ((unsigned int) 0x00000004)
+#define SCB_PIOPORCAP1_PIO2_11 ((unsigned int) 0x00000008)
+#define SCB_PIOPORCAP1_PIO2_11_MASK ((unsigned int) 0x00000008)
+#define SCB_PIOPORCAP1_PIO3_0 ((unsigned int) 0x00000010)
+#define SCB_PIOPORCAP1_PIO3_0_MASK ((unsigned int) 0x00000010)
+#define SCB_PIOPORCAP1_PIO3_1 ((unsigned int) 0x00000020)
+#define SCB_PIOPORCAP1_PIO3_1_MASK ((unsigned int) 0x00000020)
+#define SCB_PIOPORCAP1_PIO3_2 ((unsigned int) 0x00000040)
+#define SCB_PIOPORCAP1_PIO3_2_MASK ((unsigned int) 0x00000040)
+#define SCB_PIOPORCAP1_PIO3_3 ((unsigned int) 0x00000080)
+#define SCB_PIOPORCAP1_PIO3_3_MASK ((unsigned int) 0x00000080)
+#define SCB_PIOPORCAP1_PIO3_4 ((unsigned int) 0x00000100)
+#define SCB_PIOPORCAP1_PIO3_4_MASK ((unsigned int) 0x00000100)
+#define SCB_PIOPORCAP1_PIO3_5 ((unsigned int) 0x00000200)
+#define SCB_PIOPORCAP1_PIO3_5_MASK ((unsigned int) 0x00000200)
+
+/* BODCTRL (Brown-out detection control register)
+ The BOD control register selects four separate threshold values for sending a BOD
+ interrupt to the NVIC. Only one level is allowed for forced reset. */
+
+#define SCB_BODCTRL_RSTLEVEL_MASK ((unsigned int) 0x00000003)
+#define SCB_BODCTRL_INTLEVEL_1_69V_1_84V ((unsigned int) 0x00000000)
+#define SCB_BODCTRL_INTLEVEL_2_29V_2_44V ((unsigned int) 0x00000004)
+#define SCB_BODCTRL_INTLEVEL_2_59V_2_74V ((unsigned int) 0x00000008)
+#define SCB_BODCTRL_INTLEVEL_2_87V_2_98V ((unsigned int) 0x0000000C)
+#define SCB_BODCTRL_INTLEVEL_MASK ((unsigned int) 0x0000000C)
+#define SCB_BODCTRL_RSTENABLE_DISABLE ((unsigned int) 0x00000000)
+#define SCB_BODCTRL_RSTENABLE_ENABLE ((unsigned int) 0x00000010)
+#define SCB_BODCTRL_RSTENABLE_MASK ((unsigned int) 0x00000010)
+
+/* SYSTCKCAL (System tick counter calibration register) */
+
+#define SCB_SYSTICKCCAL_MASK ((unsigned int) 0x03FFFFFF) // Undefined as of v0.07 of the LPC1343 User Manual
+
+/* STARTAPRP0 (Start logic edge control register 0)
+ The STARTAPRP0 register controls the start logic inputs of ports 0 (PIO0_0 to PIO0_11)
+ and 1 (PIO1_0 to PIO1_11) and the lower 8 inputs of port 2 (PIO2_0 to PIO2_7). This
+ register selects a falling or rising edge on the corresponding PIO input to produce a falling
+ or rising clock edge, respectively, for the start logic (see Section 3\969.3).
+ Every bit in the STARTAPRP0 register controls one port input and is connected to one
+ wake-up interrupt in the NVIC. Bit 0 in the STARTAPRP0 register corresponds to interrupt
+ 0, bit 1 to interrupt 1, etc.. The bottom 32 interrupts are contained this register,
+ the top 8 interrupts are contained in the STARTAPRP1 register for total of 40 wake-up
+ interrupts.
+ Remark: Each interrupt connected to a start logic input must be enabled in the NVIC if the
+ corresponding PIO pin is used to wake up the chip from Deep-sleep mode. */
+
+#define SCB_STARTAPRP0_APRPIO0_0 ((unsigned int) 0x00000001)
+#define SCB_STARTAPRP0_APRPIO0_0_MASK ((unsigned int) 0x00000001)
+#define SCB_STARTAPRP0_APRPIO0_1 ((unsigned int) 0x00000002)
+#define SCB_STARTAPRP0_APRPIO0_1_MASK ((unsigned int) 0x00000002)
+#define SCB_STARTAPRP0_APRPIO0_2 ((unsigned int) 0x00000004)
+#define SCB_STARTAPRP0_APRPIO0_2_MASK ((unsigned int) 0x00000004)
+#define SCB_STARTAPRP0_APRPIO0_3 ((unsigned int) 0x00000008)
+#define SCB_STARTAPRP0_APRPIO0_3_MASK ((unsigned int) 0x00000008)
+#define SCB_STARTAPRP0_APRPIO0_4 ((unsigned int) 0x00000010)
+#define SCB_STARTAPRP0_APRPIO0_4_MASK ((unsigned int) 0x00000010)
+#define SCB_STARTAPRP0_APRPIO0_5 ((unsigned int) 0x00000020)
+#define SCB_STARTAPRP0_APRPIO0_5_MASK ((unsigned int) 0x00000020)
+#define SCB_STARTAPRP0_APRPIO0_6 ((unsigned int) 0x00000040)
+#define SCB_STARTAPRP0_APRPIO0_6_MASK ((unsigned int) 0x00000040)
+#define SCB_STARTAPRP0_APRPIO0_7 ((unsigned int) 0x00000080)
+#define SCB_STARTAPRP0_APRPIO0_7_MASK ((unsigned int) 0x00000080)
+#define SCB_STARTAPRP0_APRPIO0_8 ((unsigned int) 0x00000100)
+#define SCB_STARTAPRP0_APRPIO0_8_MASK ((unsigned int) 0x00000100)
+#define SCB_STARTAPRP0_APRPIO0_9 ((unsigned int) 0x00000200)
+#define SCB_STARTAPRP0_APRPIO0_9_MASK ((unsigned int) 0x00000200)
+#define SCB_STARTAPRP0_APRPIO0_10 ((unsigned int) 0x00000400)
+#define SCB_STARTAPRP0_APRPIO0_10_MASK ((unsigned int) 0x00000400)
+#define SCB_STARTAPRP0_APRPIO0_11 ((unsigned int) 0x00000800)
+#define SCB_STARTAPRP0_APRPIO0_11_MASK ((unsigned int) 0x00000800)
+#define SCB_STARTAPRP0_APRPIO1_0 ((unsigned int) 0x00001000)
+#define SCB_STARTAPRP0_APRPIO1_0_MASK ((unsigned int) 0x00001000)
+#define SCB_STARTAPRP0_APRPIO1_1 ((unsigned int) 0x00002000)
+#define SCB_STARTAPRP0_APRPIO1_1_MASK ((unsigned int) 0x00002000)
+#define SCB_STARTAPRP0_APRPIO1_2 ((unsigned int) 0x00004000)
+#define SCB_STARTAPRP0_APRPIO1_2_MASK ((unsigned int) 0x00004000)
+#define SCB_STARTAPRP0_APRPIO1_3 ((unsigned int) 0x00008000)
+#define SCB_STARTAPRP0_APRPIO1_3_MASK ((unsigned int) 0x00008000)
+#define SCB_STARTAPRP0_APRPIO1_4 ((unsigned int) 0x00010000)
+#define SCB_STARTAPRP0_APRPIO1_4_MASK ((unsigned int) 0x00010000)
+#define SCB_STARTAPRP0_APRPIO1_5 ((unsigned int) 0x00020000)
+#define SCB_STARTAPRP0_APRPIO1_5_MASK ((unsigned int) 0x00020000)
+#define SCB_STARTAPRP0_APRPIO1_6 ((unsigned int) 0x00040000)
+#define SCB_STARTAPRP0_APRPIO1_6_MASK ((unsigned int) 0x00040000)
+#define SCB_STARTAPRP0_APRPIO1_7 ((unsigned int) 0x00080000)
+#define SCB_STARTAPRP0_APRPIO1_7_MASK ((unsigned int) 0x00080000)
+#define SCB_STARTAPRP0_APRPIO1_8 ((unsigned int) 0x00100000)
+#define SCB_STARTAPRP0_APRPIO1_8_MASK ((unsigned int) 0x00100000)
+#define SCB_STARTAPRP0_APRPIO1_9 ((unsigned int) 0x00200000)
+#define SCB_STARTAPRP0_APRPIO1_9_MASK ((unsigned int) 0x00200000)
+#define SCB_STARTAPRP0_APRPIO1_10 ((unsigned int) 0x00400000)
+#define SCB_STARTAPRP0_APRPIO1_10_MASK ((unsigned int) 0x00400000)
+#define SCB_STARTAPRP0_APRPIO1_11 ((unsigned int) 0x00800000)
+#define SCB_STARTAPRP0_APRPIO1_11_MASK ((unsigned int) 0x00800000)
+#define SCB_STARTAPRP0_APRPIO2_0 ((unsigned int) 0x01000000)
+#define SCB_STARTAPRP0_APRPIO2_0_MASK ((unsigned int) 0x01000000)
+#define SCB_STARTAPRP0_APRPIO2_1 ((unsigned int) 0x02000000)
+#define SCB_STARTAPRP0_APRPIO2_1_MASK ((unsigned int) 0x02000000)
+#define SCB_STARTAPRP0_APRPIO2_2 ((unsigned int) 0x04000000)
+#define SCB_STARTAPRP0_APRPIO2_2_MASK ((unsigned int) 0x04000000)
+#define SCB_STARTAPRP0_APRPIO2_3 ((unsigned int) 0x08000000)
+#define SCB_STARTAPRP0_APRPIO2_3_MASK ((unsigned int) 0x08000000)
+#define SCB_STARTAPRP0_APRPIO2_4 ((unsigned int) 0x10000000)
+#define SCB_STARTAPRP0_APRPIO2_4_MASK ((unsigned int) 0x10000000)
+#define SCB_STARTAPRP0_APRPIO2_5 ((unsigned int) 0x20000000)
+#define SCB_STARTAPRP0_APRPIO2_5_MASK ((unsigned int) 0x20000000)
+#define SCB_STARTAPRP0_APRPIO2_6 ((unsigned int) 0x40000000)
+#define SCB_STARTAPRP0_APRPIO2_6_MASK ((unsigned int) 0x40000000)
+#define SCB_STARTAPRP0_APRPIO2_7 ((unsigned int) 0x80000000)
+#define SCB_STARTAPRP0_APRPIO2_7_MASK ((unsigned int) 0x80000000)
+#define SCB_STARTAPRP0_MASK ((unsigned int) 0xFFFFFFFF)
+
+/* STARTERP0 (Start logic signal enable register 0)
+ This STARTERP0 register enables or disables the start signal bits in the start logic. */
+
+#define SCB_STARTERP0_ERPIO0_0 ((unsigned int) 0x00000001)
+#define SCB_STARTERP0_ERPIO0_0_MASK ((unsigned int) 0x00000001)
+#define SCB_STARTERP0_ERPIO0_1 ((unsigned int) 0x00000002)
+#define SCB_STARTERP0_ERPIO0_1_MASK ((unsigned int) 0x00000002)
+#define SCB_STARTERP0_ERPIO0_2 ((unsigned int) 0x00000004)
+#define SCB_STARTERP0_ERPIO0_2_MASK ((unsigned int) 0x00000004)
+#define SCB_STARTERP0_ERPIO0_3 ((unsigned int) 0x00000008)
+#define SCB_STARTERP0_ERPIO0_3_MASK ((unsigned int) 0x00000008)
+#define SCB_STARTERP0_ERPIO0_4 ((unsigned int) 0x00000010)
+#define SCB_STARTERP0_ERPIO0_4_MASK ((unsigned int) 0x00000010)
+#define SCB_STARTERP0_ERPIO0_5 ((unsigned int) 0x00000020)
+#define SCB_STARTERP0_ERPIO0_5_MASK ((unsigned int) 0x00000020)
+#define SCB_STARTERP0_ERPIO0_6 ((unsigned int) 0x00000040)
+#define SCB_STARTERP0_ERPIO0_6_MASK ((unsigned int) 0x00000040)
+#define SCB_STARTERP0_ERPIO0_7 ((unsigned int) 0x00000080)
+#define SCB_STARTERP0_ERPIO0_7_MASK ((unsigned int) 0x00000080)
+#define SCB_STARTERP0_ERPIO0_8 ((unsigned int) 0x00000100)
+#define SCB_STARTERP0_ERPIO0_8_MASK ((unsigned int) 0x00000100)
+#define SCB_STARTERP0_ERPIO0_9 ((unsigned int) 0x00000200)
+#define SCB_STARTERP0_ERPIO0_9_MASK ((unsigned int) 0x00000200)
+#define SCB_STARTERP0_ERPIO0_10 ((unsigned int) 0x00000400)
+#define SCB_STARTERP0_ERPIO0_10_MASK ((unsigned int) 0x00000400)
+#define SCB_STARTERP0_ERPIO0_11 ((unsigned int) 0x00000800)
+#define SCB_STARTERP0_ERPIO0_11_MASK ((unsigned int) 0x00000800)
+#define SCB_STARTERP0_ERPIO1_0 ((unsigned int) 0x00001000)
+#define SCB_STARTERP0_ERPIO1_0_MASK ((unsigned int) 0x00001000)
+#define SCB_STARTERP0_ERPIO1_1 ((unsigned int) 0x00002000)
+#define SCB_STARTERP0_ERPIO1_1_MASK ((unsigned int) 0x00002000)
+#define SCB_STARTERP0_ERPIO1_2 ((unsigned int) 0x00004000)
+#define SCB_STARTERP0_ERPIO1_2_MASK ((unsigned int) 0x00004000)
+#define SCB_STARTERP0_ERPIO1_3 ((unsigned int) 0x00008000)
+#define SCB_STARTERP0_ERPIO1_3_MASK ((unsigned int) 0x00008000)
+#define SCB_STARTERP0_ERPIO1_4 ((unsigned int) 0x00010000)
+#define SCB_STARTERP0_ERPIO1_4_MASK ((unsigned int) 0x00010000)
+#define SCB_STARTERP0_ERPIO1_5 ((unsigned int) 0x00020000)
+#define SCB_STARTERP0_ERPIO1_5_MASK ((unsigned int) 0x00020000)
+#define SCB_STARTERP0_ERPIO1_6 ((unsigned int) 0x00040000)
+#define SCB_STARTERP0_ERPIO1_6_MASK ((unsigned int) 0x00040000)
+#define SCB_STARTERP0_ERPIO1_7 ((unsigned int) 0x00080000)
+#define SCB_STARTERP0_ERPIO1_7_MASK ((unsigned int) 0x00080000)
+#define SCB_STARTERP0_ERPIO1_8 ((unsigned int) 0x00100000)
+#define SCB_STARTERP0_ERPIO1_8_MASK ((unsigned int) 0x00100000)
+#define SCB_STARTERP0_ERPIO1_9 ((unsigned int) 0x00200000)
+#define SCB_STARTERP0_ERPIO1_9_MASK ((unsigned int) 0x00200000)
+#define SCB_STARTERP0_ERPIO1_10 ((unsigned int) 0x00400000)
+#define SCB_STARTERP0_ERPIO1_10_MASK ((unsigned int) 0x00400000)
+#define SCB_STARTERP0_ERPIO1_11 ((unsigned int) 0x00800000)
+#define SCB_STARTERP0_ERPIO1_11_MASK ((unsigned int) 0x00800000)
+#define SCB_STARTERP0_ERPIO2_0 ((unsigned int) 0x01000000)
+#define SCB_STARTERP0_ERPIO2_0_MASK ((unsigned int) 0x01000000)
+#define SCB_STARTERP0_ERPIO2_1 ((unsigned int) 0x02000000)
+#define SCB_STARTERP0_ERPIO2_1_MASK ((unsigned int) 0x02000000)
+#define SCB_STARTERP0_ERPIO2_2 ((unsigned int) 0x04000000)
+#define SCB_STARTERP0_ERPIO2_2_MASK ((unsigned int) 0x04000000)
+#define SCB_STARTERP0_ERPIO2_3 ((unsigned int) 0x08000000)
+#define SCB_STARTERP0_ERPIO2_3_MASK ((unsigned int) 0x08000000)
+#define SCB_STARTERP0_ERPIO2_4 ((unsigned int) 0x10000000)
+#define SCB_STARTERP0_ERPIO2_4_MASK ((unsigned int) 0x10000000)
+#define SCB_STARTERP0_ERPIO2_5 ((unsigned int) 0x20000000)
+#define SCB_STARTERP0_ERPIO2_5_MASK ((unsigned int) 0x20000000)
+#define SCB_STARTERP0_ERPIO2_6 ((unsigned int) 0x40000000)
+#define SCB_STARTERP0_ERPIO2_6_MASK ((unsigned int) 0x40000000)
+#define SCB_STARTERP0_ERPIO2_7 ((unsigned int) 0x80000000)
+#define SCB_STARTERP0_ERPIO2_7_MASK ((unsigned int) 0x80000000)
+#define SCB_STARTERP0_MASK ((unsigned int) 0xFFFFFFFF)
+
+/* STARTRSRP0CLR (Start logic reset register 0)
+ Writing a one to a bit in the STARTRSRP0CLR register resets the start logic state. The
+ start-up logic uses the input signals to generate a clock edge for registering a start
+ signal. This clock edge (falling or rising) sets the interrupt for waking up from
+ Deep-sleep mode. Therefore, the start-up logic states must be cleared before being used. */
+
+#define SCB_STARTRSRP0CLR_RSRPIO0_0 ((unsigned int) 0x00000001)
+#define SCB_STARTRSRP0CLR_RSRPIO0_0_MASK ((unsigned int) 0x00000001)
+#define SCB_STARTRSRP0CLR_RSRPIO0_1 ((unsigned int) 0x00000002)
+#define SCB_STARTRSRP0CLR_RSRPIO0_1_MASK ((unsigned int) 0x00000002)
+#define SCB_STARTRSRP0CLR_RSRPIO0_2 ((unsigned int) 0x00000004)
+#define SCB_STARTRSRP0CLR_RSRPIO0_2_MASK ((unsigned int) 0x00000004)
+#define SCB_STARTRSRP0CLR_RSRPIO0_3 ((unsigned int) 0x00000008)
+#define SCB_STARTRSRP0CLR_RSRPIO0_3_MASK ((unsigned int) 0x00000008)
+#define SCB_STARTRSRP0CLR_RSRPIO0_4 ((unsigned int) 0x00000010)
+#define SCB_STARTRSRP0CLR_RSRPIO0_4_MASK ((unsigned int) 0x00000010)
+#define SCB_STARTRSRP0CLR_RSRPIO0_5 ((unsigned int) 0x00000020)
+#define SCB_STARTRSRP0CLR_RSRPIO0_5_MASK ((unsigned int) 0x00000020)
+#define SCB_STARTRSRP0CLR_RSRPIO0_6 ((unsigned int) 0x00000040)
+#define SCB_STARTRSRP0CLR_RSRPIO0_6_MASK ((unsigned int) 0x00000040)
+#define SCB_STARTRSRP0CLR_RSRPIO0_7 ((unsigned int) 0x00000080)
+#define SCB_STARTRSRP0CLR_RSRPIO0_7_MASK ((unsigned int) 0x00000080)
+#define SCB_STARTRSRP0CLR_RSRPIO0_8 ((unsigned int) 0x00000100)
+#define SCB_STARTRSRP0CLR_RSRPIO0_8_MASK ((unsigned int) 0x00000100)
+#define SCB_STARTRSRP0CLR_RSRPIO0_9 ((unsigned int) 0x00000200)
+#define SCB_STARTRSRP0CLR_RSRPIO0_9_MASK ((unsigned int) 0x00000200)
+#define SCB_STARTRSRP0CLR_RSRPIO0_10 ((unsigned int) 0x00000400)
+#define SCB_STARTRSRP0CLR_RSRPIO0_10_MASK ((unsigned int) 0x00000400)
+#define SCB_STARTRSRP0CLR_RSRPIO0_11 ((unsigned int) 0x00000800)
+#define SCB_STARTRSRP0CLR_RSRPIO0_11_MASK ((unsigned int) 0x00000800)
+#define SCB_STARTRSRP0CLR_RSRPIO1_0 ((unsigned int) 0x00001000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_0_MASK ((unsigned int) 0x00001000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_1 ((unsigned int) 0x00002000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_1_MASK ((unsigned int) 0x00002000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_2 ((unsigned int) 0x00004000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_2_MASK ((unsigned int) 0x00004000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_3 ((unsigned int) 0x00008000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_3_MASK ((unsigned int) 0x00008000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_4 ((unsigned int) 0x00010000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_4_MASK ((unsigned int) 0x00010000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_5 ((unsigned int) 0x00020000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_5_MASK ((unsigned int) 0x00020000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_6 ((unsigned int) 0x00040000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_6_MASK ((unsigned int) 0x00040000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_7 ((unsigned int) 0x00080000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_7_MASK ((unsigned int) 0x00080000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_8 ((unsigned int) 0x00100000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_8_MASK ((unsigned int) 0x00100000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_9 ((unsigned int) 0x00200000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_9_MASK ((unsigned int) 0x00200000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_10 ((unsigned int) 0x00400000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_10_MASK ((unsigned int) 0x00400000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_11 ((unsigned int) 0x00800000)
+#define SCB_STARTRSRP0CLR_RSRPIO1_11_MASK ((unsigned int) 0x00800000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_0 ((unsigned int) 0x01000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_0_MASK ((unsigned int) 0x01000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_1 ((unsigned int) 0x02000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_1_MASK ((unsigned int) 0x02000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_2 ((unsigned int) 0x04000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_2_MASK ((unsigned int) 0x04000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_3 ((unsigned int) 0x08000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_3_MASK ((unsigned int) 0x08000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_4 ((unsigned int) 0x10000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_4_MASK ((unsigned int) 0x10000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_5 ((unsigned int) 0x20000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_5_MASK ((unsigned int) 0x20000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_6 ((unsigned int) 0x40000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_6_MASK ((unsigned int) 0x40000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_7 ((unsigned int) 0x80000000)
+#define SCB_STARTRSRP0CLR_RSRPIO2_7_MASK ((unsigned int) 0x80000000)
+#define SCB_STARTRSRP0CLR_MASK ((unsigned int) 0xFFFFFFFF)
+
+/* (Start logic status register 0)
+ This register reflects the status of the enabled start signal bits. Each bit
+ (if enabled) reflects the state of the start logic, i.e. whether or not a
+ wake-up signal has been received for a given pin. */
+
+#define SCB_STARTSRP0_SRPIO0_0 ((unsigned int) 0x00000001)
+#define SCB_STARTSRP0_SRPIO0_0_MASK ((unsigned int) 0x00000001)
+#define SCB_STARTSRP0_SRPIO0_1 ((unsigned int) 0x00000002)
+#define SCB_STARTSRP0_SRPIO0_1_MASK ((unsigned int) 0x00000002)
+#define SCB_STARTSRP0_SRPIO0_2 ((unsigned int) 0x00000004)
+#define SCB_STARTSRP0_SRPIO0_2_MASK ((unsigned int) 0x00000004)
+#define SCB_STARTSRP0_SRPIO0_3 ((unsigned int) 0x00000008)
+#define SCB_STARTSRP0_SRPIO0_3_MASK ((unsigned int) 0x00000008)
+#define SCB_STARTSRP0_SRPIO0_4 ((unsigned int) 0x00000010)
+#define SCB_STARTSRP0_SRPIO0_4_MASK ((unsigned int) 0x00000010)
+#define SCB_STARTSRP0_SRPIO0_5 ((unsigned int) 0x00000020)
+#define SCB_STARTSRP0_SRPIO0_5_MASK ((unsigned int) 0x00000020)
+#define SCB_STARTSRP0_SRPIO0_6 ((unsigned int) 0x00000040)
+#define SCB_STARTSRP0_SRPIO0_6_MASK ((unsigned int) 0x00000040)
+#define SCB_STARTSRP0_SRPIO0_7 ((unsigned int) 0x00000080)
+#define SCB_STARTSRP0_SRPIO0_7_MASK ((unsigned int) 0x00000080)
+#define SCB_STARTSRP0_SRPIO0_8 ((unsigned int) 0x00000100)
+#define SCB_STARTSRP0_SRPIO0_8_MASK ((unsigned int) 0x00000100)
+#define SCB_STARTSRP0_SRPIO0_9 ((unsigned int) 0x00000200)
+#define SCB_STARTSRP0_SRPIO0_9_MASK ((unsigned int) 0x00000200)
+#define SCB_STARTSRP0_SRPIO0_10 ((unsigned int) 0x00000400)
+#define SCB_STARTSRP0_SRPIO0_10_MASK ((unsigned int) 0x00000400)
+#define SCB_STARTSRP0_SRPIO0_11 ((unsigned int) 0x00000800)
+#define SCB_STARTSRP0_SRPIO0_11_MASK ((unsigned int) 0x00000800)
+#define SCB_STARTSRP0_SRPIO1_0 ((unsigned int) 0x00001000)
+#define SCB_STARTSRP0_SRPIO1_0_MASK ((unsigned int) 0x00001000)
+#define SCB_STARTSRP0_SRPIO1_1 ((unsigned int) 0x00002000)
+#define SCB_STARTSRP0_SRPIO1_1_MASK ((unsigned int) 0x00002000)
+#define SCB_STARTSRP0_SRPIO1_2 ((unsigned int) 0x00004000)
+#define SCB_STARTSRP0_SRPIO1_2_MASK ((unsigned int) 0x00004000)
+#define SCB_STARTSRP0_SRPIO1_3 ((unsigned int) 0x00008000)
+#define SCB_STARTSRP0_SRPIO1_3_MASK ((unsigned int) 0x00008000)
+#define SCB_STARTSRP0_SRPIO1_4 ((unsigned int) 0x00010000)
+#define SCB_STARTSRP0_SRPIO1_4_MASK ((unsigned int) 0x00010000)
+#define SCB_STARTSRP0_SRPIO1_5 ((unsigned int) 0x00020000)
+#define SCB_STARTSRP0_SRPIO1_5_MASK ((unsigned int) 0x00020000)
+#define SCB_STARTSRP0_SRPIO1_6 ((unsigned int) 0x00040000)
+#define SCB_STARTSRP0_SRPIO1_6_MASK ((unsigned int) 0x00040000)
+#define SCB_STARTSRP0_SRPIO1_7 ((unsigned int) 0x00080000)
+#define SCB_STARTSRP0_SRPIO1_7_MASK ((unsigned int) 0x00080000)
+#define SCB_STARTSRP0_SRPIO1_8 ((unsigned int) 0x00100000)
+#define SCB_STARTSRP0_SRPIO1_8_MASK ((unsigned int) 0x00100000)
+#define SCB_STARTSRP0_SRPIO1_9 ((unsigned int) 0x00200000)
+#define SCB_STARTSRP0_SRPIO1_9_MASK ((unsigned int) 0x00200000)
+#define SCB_STARTSRP0_SRPIO1_10 ((unsigned int) 0x00400000)
+#define SCB_STARTSRP0_SRPIO1_10_MASK ((unsigned int) 0x00400000)
+#define SCB_STARTSRP0_SRPIO1_11 ((unsigned int) 0x00800000)
+#define SCB_STARTSRP0_SRPIO1_11_MASK ((unsigned int) 0x00800000)
+#define SCB_STARTSRP0_SRPIO2_0 ((unsigned int) 0x01000000)
+#define SCB_STARTSRP0_SRPIO2_0_MASK ((unsigned int) 0x01000000)
+#define SCB_STARTSRP0_SRPIO2_1 ((unsigned int) 0x02000000)
+#define SCB_STARTSRP0_SRPIO2_1_MASK ((unsigned int) 0x02000000)
+#define SCB_STARTSRP0_SRPIO2_2 ((unsigned int) 0x04000000)
+#define SCB_STARTSRP0_SRPIO2_2_MASK ((unsigned int) 0x04000000)
+#define SCB_STARTSRP0_SRPIO2_3 ((unsigned int) 0x08000000)
+#define SCB_STARTSRP0_SRPIO2_3_MASK ((unsigned int) 0x08000000)
+#define SCB_STARTSRP0_SRPIO2_4 ((unsigned int) 0x10000000)
+#define SCB_STARTSRP0_SRPIO2_4_MASK ((unsigned int) 0x10000000)
+#define SCB_STARTSRP0_SRPIO2_5 ((unsigned int) 0x20000000)
+#define SCB_STARTSRP0_SRPIO2_5_MASK ((unsigned int) 0x20000000)
+#define SCB_STARTSRP0_SRPIO2_6 ((unsigned int) 0x40000000)
+#define SCB_STARTSRP0_SRPIO2_6_MASK ((unsigned int) 0x40000000)
+#define SCB_STARTSRP0_SRPIO2_7 ((unsigned int) 0x80000000)
+#define SCB_STARTSRP0_SRPIO2_7_MASK ((unsigned int) 0x80000000)
+#define SCB_STARTSRP0_MASK ((unsigned int) 0xFFFFFFFF)
+
+
+/* STARTAPRP1 (Start logic edge control register 1)
+ The STARTAPRP1 register controls the start logic inputs of ports 2 (PIO2_8 to PIO2_11)
+ and 3 (PIO3_0 to PIO3_3). This register selects a falling or rising edge on the
+ corresponding PIO input to produce a falling or rising clock edge, respectively, for the
+ start-up logic.
+ Every bit in the STARTAPRP1 register controls one port input and is connected to one
+ wake-up interrupt in the NVIC. Bit 0 in the STARTAPRP1 register corresponds to interrupt
+ 32, bit 1 to interrupt 33, up to bit 7 corresponding to interrupt 39.
+ Remark: Each interrupt connected to a start logic input must be enabled in the NVIC if the
+ corresponding PIO pin is used to wake up the chip from Deep-sleep mode.*/
+
+#define SCB_STARTAPRP1_APRPIO2_8 ((unsigned int) 0x00000001)
+#define SCB_STARTAPRP1_APRPIO2_8_MASK ((unsigned int) 0x00000001)
+#define SCB_STARTAPRP1_APRPIO2_8 ((unsigned int) 0x00000001)
+#define SCB_STARTAPRP1_APRPIO2_9_MASK ((unsigned int) 0x00000002)
+#define SCB_STARTAPRP1_APRPIO2_10 ((unsigned int) 0x00000004)
+#define SCB_STARTAPRP1_APRPIO2_10_MASK ((unsigned int) 0x00000004)
+#define SCB_STARTAPRP1_APRPIO2_11 ((unsigned int) 0x00000008)
+#define SCB_STARTAPRP1_APRPIO2_11_MASK ((unsigned int) 0x00000008)
+#define SCB_STARTAPRP1_APRPIO3_0 ((unsigned int) 0x00000010)
+#define SCB_STARTAPRP1_APRPIO3_0_MASK ((unsigned int) 0x00000010)
+#define SCB_STARTAPRP1_APRPIO3_1 ((unsigned int) 0x00000020)
+#define SCB_STARTAPRP1_APRPIO3_1_MASK ((unsigned int) 0x00000020)
+#define SCB_STARTAPRP1_APRPIO3_2 ((unsigned int) 0x00000040)
+#define SCB_STARTAPRP1_APRPIO3_2_MASK ((unsigned int) 0x00000040)
+#define SCB_STARTAPRP1_APRPIO3_3 ((unsigned int) 0x00000080)
+#define SCB_STARTAPRP1_APRPIO3_3_MASK ((unsigned int) 0x00000080)
+#define SCB_STARTAPRP1_MASK ((unsigned int) 0x000000FF)
+
+/* STARTERP1 (Start logic signal enable register 1)
+ This STARTERP1 register enables or disables the start signal bits in the start logic. */
+
+#define SCB_STARTERP1_ERPIO2_8 ((unsigned int) 0x00000001)
+#define SCB_STARTERP1_ERPIO2_8_MASK ((unsigned int) 0x00000001)
+#define SCB_STARTERP1_ERPIO2_8 ((unsigned int) 0x00000001)
+#define SCB_STARTERP1_ERPIO2_9_MASK ((unsigned int) 0x00000002)
+#define SCB_STARTERP1_ERPIO2_10 ((unsigned int) 0x00000004)
+#define SCB_STARTERP1_ERPIO2_10_MASK ((unsigned int) 0x00000004)
+#define SCB_STARTERP1_ERPIO2_11 ((unsigned int) 0x00000008)
+#define SCB_STARTERP1_ERPIO2_11_MASK ((unsigned int) 0x00000008)
+#define SCB_STARTERP1_ERPIO3_0 ((unsigned int) 0x00000010)
+#define SCB_STARTERP1_ERPIO3_0_MASK ((unsigned int) 0x00000010)
+#define SCB_STARTERP1_ERPIO3_1 ((unsigned int) 0x00000020)
+#define SCB_STARTERP1_ERPIO3_1_MASK ((unsigned int) 0x00000020)
+#define SCB_STARTERP1_ERPIO3_2 ((unsigned int) 0x00000040)
+#define SCB_STARTERP1_ERPIO3_2_MASK ((unsigned int) 0x00000040)
+#define SCB_STARTERP1_ERPIO3_3 ((unsigned int) 0x00000080)
+#define SCB_STARTERP1_ERPIO3_3_MASK ((unsigned int) 0x00000080)
+#define SCB_STARTERP1_MASK ((unsigned int) 0x000000FF)
+
+/* (Start logic reset register 1)
+ Writing a one to a bit in the STARTRSRP1CLR register resets the start logic state. The
+ start-up logic uses the input signals to generate a clock edge for registering a start
+ signal. This clock edge (falling or rising) sets the interrupt for waking up from
+ Deep-sleep mode. Therefore, the start-up logic states must be cleared before being used. */
+
+#define SCB_STARTRSRP1CLR_RSRPIO2_8 ((unsigned int) 0x00000001)
+#define SCB_STARTRSRP1CLR_RSRPIO2_8_MASK ((unsigned int) 0x00000001)
+#define SCB_STARTRSRP1CLR_RSRPIO2_8 ((unsigned int) 0x00000001)
+#define SCB_STARTRSRP1CLR_RSRPIO2_9_MASK ((unsigned int) 0x00000002)
+#define SCB_STARTRSRP1CLR_RSRPIO2_10 ((unsigned int) 0x00000004)
+#define SCB_STARTRSRP1CLR_RSRPIO2_10_MASK ((unsigned int) 0x00000004)
+#define SCB_STARTRSRP1CLR_RSRPIO2_11 ((unsigned int) 0x00000008)
+#define SCB_STARTRSRP1CLR_RSRPIO2_11_MASK ((unsigned int) 0x00000008)
+#define SCB_STARTRSRP1CLR_RSRPIO3_0 ((unsigned int) 0x00000010)
+#define SCB_STARTRSRP1CLR_RSRPIO3_0_MASK ((unsigned int) 0x00000010)
+#define SCB_STARTRSRP1CLR_RSRPIO3_1 ((unsigned int) 0x00000020)
+#define SCB_STARTRSRP1CLR_RSRPIO3_1_MASK ((unsigned int) 0x00000020)
+#define SCB_STARTRSRP1CLR_RSRPIO3_2 ((unsigned int) 0x00000040)
+#define SCB_STARTRSRP1CLR_RSRPIO3_2_MASK ((unsigned int) 0x00000040)
+#define SCB_STARTRSRP1CLR_RSRPIO3_3 ((unsigned int) 0x00000080)
+#define SCB_STARTRSRP1CLR_RSRPIO3_3_MASK ((unsigned int) 0x00000080)
+#define SCB_STARTRSRP1CLR_MASK ((unsigned int) 0x000000FF)
+
+/* STARTSRP1 (Start logic status register 1)
+ This register reflects the status of the enabled start signals. */
+
+#define SCB_STARTSRP1_SRPIO2_8 ((unsigned int) 0x00000001)
+#define SCB_STARTSRP1_SRPIO2_8_MASK ((unsigned int) 0x00000001)
+#define SCB_STARTSRP1_SRPIO2_8 ((unsigned int) 0x00000001)
+#define SCB_STARTSRP1_SRPIO2_9_MASK ((unsigned int) 0x00000002)
+#define SCB_STARTSRP1_SRPIO2_10 ((unsigned int) 0x00000004)
+#define SCB_STARTSRP1_SRPIO2_10_MASK ((unsigned int) 0x00000004)
+#define SCB_STARTSRP1_SRPIO2_11 ((unsigned int) 0x00000008)
+#define SCB_STARTSRP1_SRPIO2_11_MASK ((unsigned int) 0x00000008)
+#define SCB_STARTSRP1_SRPIO3_0 ((unsigned int) 0x00000010)
+#define SCB_STARTSRP1_SRPIO3_0_MASK ((unsigned int) 0x00000010)
+#define SCB_STARTSRP1_SRPIO3_1 ((unsigned int) 0x00000020)
+#define SCB_STARTSRP1_SRPIO3_1_MASK ((unsigned int) 0x00000020)
+#define SCB_STARTSRP1_SRPIO3_2 ((unsigned int) 0x00000040)
+#define SCB_STARTSRP1_SRPIO3_2_MASK ((unsigned int) 0x00000040)
+#define SCB_STARTSRP1_SRPIO3_3 ((unsigned int) 0x00000080)
+#define SCB_STARTSRP1_SRPIO3_3_MASK ((unsigned int) 0x00000080)
+#define SCB_STARTSRP1_MASK ((unsigned int) 0x000000FF)
+
+/* PDSLEEPCFG (Deep-sleep mode configuration register)
+ The bits in this register can be programmed to indicate the state the chip must enter when
+ the Deep-sleep mode is asserted by the ARM. The value of the PDSLEEPCFG register
+ will be automatically loaded into the PDRUNCFG register when the Sleep mode is
+ entered. */
+
+#define SCB_PDSLEEPCFG_IRCOUT_PD ((unsigned int) 0x00000001)
+#define SCB_PDSLEEPCFG_IRCOUT_PD_MASK ((unsigned int) 0x00000001)
+#define SCB_PDSLEEPCFG_IRC_PD ((unsigned int) 0x00000002)
+#define SCB_PDSLEEPCFG_IRC_PD_MASK ((unsigned int) 0x00000002)
+#define SCB_PDSLEEPCFG_FLASH_PD ((unsigned int) 0x00000004)
+#define SCB_PDSLEEPCFG_FLASH_PD_MASK ((unsigned int) 0x00000004)
+#define SCB_PDSLEEPCFG_BOD_PD ((unsigned int) 0x00000008)
+#define SCB_PDSLEEPCFG_BOD_PD_MASK ((unsigned int) 0x00000008)
+#define SCB_PDSLEEPCFG_ADC_PD ((unsigned int) 0x00000010)
+#define SCB_PDSLEEPCFG_ADC_PD_MASK ((unsigned int) 0x00000010)
+#define SCB_PDSLEEPCFG_SYSOSC_PD ((unsigned int) 0x00000020)
+#define SCB_PDSLEEPCFG_SYSOSC_PD_MASK ((unsigned int) 0x00000020)
+#define SCB_PDSLEEPCFG_WDTOSC_PD ((unsigned int) 0x00000040)
+#define SCB_PDSLEEPCFG_WDTOSC_PD_MASK ((unsigned int) 0x00000040)
+#define SCB_PDSLEEPCFG_SYSPLL_PD ((unsigned int) 0x00000080)
+#define SCB_PDSLEEPCFG_SYSPLL_PD_MASK ((unsigned int) 0x00000080)
+#define SCB_PDSLEEPCFG_USBPLL_PD ((unsigned int) 0x00000100)
+#define SCB_PDSLEEPCFG_USBPLL_PD_MASK ((unsigned int) 0x00000100)
+#define SCB_PDSLEEPCFG_USBPAD_PD ((unsigned int) 0x00000400)
+#define SCB_PDSLEEPCFG_USBPAD_PD_MASK ((unsigned int) 0x00000400)
+
+/* PDAWAKECFG (Wake-up configuration register)
+ The bits in this register can be programmed to indicate the state the chip must enter when
+ it is waking up from Deep-sleep mode. */
+
+#define SCB_PDAWAKECFG_IRCOUT_PD ((unsigned int) 0x00000001)
+#define SCB_PDAWAKECFG_IRCOUT_PD_MASK ((unsigned int) 0x00000001)
+#define SCB_PDAWAKECFG_IRC_PD ((unsigned int) 0x00000002)
+#define SCB_PDAWAKECFG_IRC_PD_MASK ((unsigned int) 0x00000002)
+#define SCB_PDAWAKECFG_FLASH_PD ((unsigned int) 0x00000004)
+#define SCB_PDAWAKECFG_FLASH_PD_MASK ((unsigned int) 0x00000004)
+#define SCB_PDAWAKECFG_BOD_PD ((unsigned int) 0x00000008)
+#define SCB_PDAWAKECFG_BOD_PD_MASK ((unsigned int) 0x00000008)
+#define SCB_PDAWAKECFG_ADC_PD ((unsigned int) 0x00000010)
+#define SCB_PDAWAKECFG_ADC_PD_MASK ((unsigned int) 0x00000010)
+#define SCB_PDAWAKECFG_SYSOSC_PD ((unsigned int) 0x00000020)
+#define SCB_PDAWAKECFG_SYSOSC_PD_MASK ((unsigned int) 0x00000020)
+#define SCB_PDAWAKECFG_WDTOSC_PD ((unsigned int) 0x00000040)
+#define SCB_PDAWAKECFG_WDTOSC_PD_MASK ((unsigned int) 0x00000040)
+#define SCB_PDAWAKECFG_SYSPLL_PD ((unsigned int) 0x00000080)
+#define SCB_PDAWAKECFG_SYSPLL_PD_MASK ((unsigned int) 0x00000080)
+#define SCB_PDAWAKECFG_USBPLL_PD ((unsigned int) 0x00000100)
+#define SCB_PDAWAKECFG_USBPLL_PD_MASK ((unsigned int) 0x00000100)
+#define SCB_PDAWAKECFG_USBPAD_PD ((unsigned int) 0x00000400)
+#define SCB_PDAWAKECFG_USBPAD_PD_MASK ((unsigned int) 0x00000400)
+
+/* PDRUNCFG (Power-down configuration register)
+ The bits in the PDRUNCFG register control the power to the various analog blocks. This
+ register can be written to at any time while the chip is running, and a write will take effect
+ immediately with the exception of the power-down signal to the IRC. Setting a 1 powers-down
+ a peripheral and 0 enables it. */
+
+#define SCB_PDRUNCFG_IRCOUT ((unsigned int) 0x00000001) // IRC oscillator output power-down
+#define SCB_PDRUNCFG_IRCOUT_MASK ((unsigned int) 0x00000001)
+#define SCB_PDRUNCFG_IRC ((unsigned int) 0x00000002) // IRC oscillator power-down
+#define SCB_PDRUNCFG_IRC_MASK ((unsigned int) 0x00000002)
+#define SCB_PDRUNCFG_FLASH ((unsigned int) 0x00000004) // Flash power-down
+#define SCB_PDRUNCFG_FLASH_MASK ((unsigned int) 0x00000004)
+#define SCB_PDRUNCFG_BOD ((unsigned int) 0x00000008) // Brown-out detector power-down
+#define SCB_PDRUNCFG_BOD_MASK ((unsigned int) 0x00000008)
+#define SCB_PDRUNCFG_ADC ((unsigned int) 0x00000010) // ADC power-down
+#define SCB_PDRUNCFG_ADC_MASK ((unsigned int) 0x00000010)
+#define SCB_PDRUNCFG_SYSOSC ((unsigned int) 0x00000020) // System oscillator power-down
+#define SCB_PDRUNCFG_SYSOSC_MASK ((unsigned int) 0x00000020)
+#define SCB_PDRUNCFG_WDTOSC ((unsigned int) 0x00000040) // Watchdog oscillator power-down
+#define SCB_PDRUNCFG_WDTOSC_MASK ((unsigned int) 0x00000040)
+#define SCB_PDRUNCFG_SYSPLL ((unsigned int) 0x00000080) // System PLL power-down
+#define SCB_PDRUNCFG_SYSPLL_MASK ((unsigned int) 0x00000080)
+#define SCB_PDRUNCFG_USBPLL ((unsigned int) 0x00000100) // USB PLL power-down
+#define SCB_PDRUNCFG_USBPLL_MASK ((unsigned int) 0x00000100)
+#define SCB_PDRUNCFG_USBPAD ((unsigned int) 0x00000400) // USB PHY power-down
+#define SCB_PDRUNCFG_USBPAD_MASK ((unsigned int) 0x00000400)
+
+/* DEVICE_ID (Device ID Register)
+ This device ID register is a read-only register and contains the device ID for each
+ LPC13xx part. This register is also read by the ISP/IAP commands. */
+
+#define SCB_DEVICEID_LPC1311FHN33 ((unsigned int) 0x2C42502B)
+#define SCB_DEVICEID_LPC1313FHN33 ((unsigned int) 0x2C40102B)
+#define SCB_DEVICEID_LPC1313FBD48 ((unsigned int) 0x2C40102B)
+#define SCB_DEVICEID_LPC1342FHN33 ((unsigned int) 0x3D01402B)
+#define SCB_DEVICEID_LPC1343FHN33 ((unsigned int) 0x3D00002B)
+#define SCB_DEVICEID_LPC1343FBD48 ((unsigned int) 0x3D00002B)
+
+/*##############################################################################
+## Data Watchpoint and Trace Unit (DWT)
+##############################################################################*/
+// For more information, see Cortex-M3 Technical Reference Manual 8.3
+// This block is optional and not all comparators or functionality may
+// be present on all chips, though basic DWT functionality is present
+// on the LPC1343 since CYCNT works
+
+#define DWT_CTRL (*(pREG32 (0xE0001000))) // Control register
+#define DWT_CYCCNT (*(pREG32 (0xE0001004))) // Cycle counter (useful for rough performance testing)
+#define DWT_CPICNT (*(pREG32 (0xE0001008))) // CPI Count Register
+#define DWT_EXCCNT (*(pREG32 (0xE000100C))) // Exception overhead count register
+#define DWT_SLEEPCNT (*(pREG32 (0xE0001010))) // Sleep count register
+#define DWT_LSUCNT (*(pREG32 (0xE0001014))) // LSU count register
+#define DWT_FOLDCNT (*(pREG32 (0xE0001018))) // Folder-instruction count register
+#define DWT_PCSR (*(pREG32 (0xE000101C))) // Program counter sample register
+#define DWT_COMP0 (*(pREG32 (0xE0001020))) // Comparator register 0
+#define DWT_MASK0 (*(pREG32 (0xE0001024))) // Mask register 0
+#define DWT_FUNCTION0 (*(pREG32 (0xE0001028))) // Function register 0
+#define DWT_COMP1 (*(pREG32 (0xE0001030))) // Comparator register 1
+#define DWT_MASK1 (*(pREG32 (0xE0001034))) // Mask register 1
+#define DWT_FUNCTION1 (*(pREG32 (0xE0001038))) // Function register 1
+#define DWT_COMP2 (*(pREG32 (0xE0001040))) // Comparator register 2
+#define DWT_MASK2 (*(pREG32 (0xE0001044))) // Mask register 2
+#define DWT_FUNCTION2 (*(pREG32 (0xE0001048))) // Function register 2
+#define DWT_COMP3 (*(pREG32 (0xE0001050))) // Comparator register 3
+#define DWT_MASK3 (*(pREG32 (0xE0001054))) // Mask register 3
+#define DWT_FUNCTION3 (*(pREG32 (0xE0001058))) // Function register 3
+
+/*##############################################################################
+## Power Management Unit (PMU)
+##############################################################################*/
+
+#define PMU_BASE_ADDRESS (0x40038000)
+
+#define PMU_PMUCTRL (*(pREG32 (0x40038000))) // Power control register
+#define PMU_GPREG0 (*(pREG32 (0x40038004))) // General purpose register 0
+#define PMU_GPREG1 (*(pREG32 (0x40038008))) // General purpose register 1
+#define PMU_GPREG2 (*(pREG32 (0x4003800C))) // General purpose register 2
+#define PMU_GPREG3 (*(pREG32 (0x40038010))) // General purpose register 3
+#define PMU_GPREG4 (*(pREG32 (0x40038014))) // General purpose register 4
+
+#define PMU_PMUCTRL_DPDEN_MASK ((unsigned int) 0x00000002) // Deep power-down enable
+#define PMU_PMUCTRL_DPDEN_DEEPPOWERDOWN ((unsigned int) 0x00000002) // WFI will enter deep power-down mode
+#define PMU_PMUCTRL_DPDEN_SLEEP ((unsigned int) 0x00000000) // WFI will enter sleep mode
+#define PMU_PMUCTRL_DPDFLAG_MASK ((unsigned int) 0x00000800) // Deep power-down flag
+#define PMU_PMUCTRL_DPDFLAG ((unsigned int) 0x00000800)
+
+/* GPREG0..3 (General purpose registers 0 to 3)
+ The general purpose registers retain data through the Deep power-down mode when
+ power is still applied to the VDD(3V3) pin but the chip has entered Deep power-down mode.
+ Only a \93cold\94 boot when all power has been completely removed from the chip will reset
+ the general purpose registers. */
+
+#define PMU_GPREG0_GPDATA_MASK ((unsigned int) 0xFFFFFFFF)
+#define PMU_GPREG1_GPDATA_MASK ((unsigned int) 0xFFFFFFFF)
+#define PMU_GPREG2_GPDATA_MASK ((unsigned int) 0xFFFFFFFF)
+#define PMU_GPREG3_GPDATA_MASK ((unsigned int) 0xFFFFFFFF)
+
+/* GPREG4 (General purpose register 4)
+ The general purpose register 4 retains data through the Deep power-down mode when
+ power is still applied to the VDD(3V3) pin but the chip has entered Deep power-down mode.
+ Only a \93cold\94 boot, when all power has been completely removed from the chip, will reset
+ the general purpose registers.
+
+ Remark: If the external voltage applied on pin VDD(3V3) drops below <tbd> V, the
+ hysteresis of the WAKEUP input pin has to be disabled in order for the chip to wake up
+ from Deep power-down mode. */
+
+#define PMU_GPREG4_GPDATA_MASK ((unsigned int) 0xFFFFF800)
+#define PMU_GPREG4_WAKEUPHYS_MASK ((unsigned int) 0x00000400)
+#define PMU_GPREG4_WAKEUPHYS_HYSTERESISENABLED ((unsigned int) 0x00000400)
+#define PMU_GPREG4_WAKEUPHYS_HYSTERESISDISABLED ((unsigned int) 0x00000000)
+#define PMU_GPREG4_GPDATA_MASK ((unsigned int) 0xFFFFF800)
+
+/*##############################################################################
+## I/O Control (IOCON)
+##############################################################################*/
+
+#define IOCON_BASE_ADDRESS (0x40044000)
+
+/* Values that should be common to all pins, though they are also defined
+ on the individual pin level in case they change with a pin on any future
+ device */
+
+#define IOCON_COMMON_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_COMMON_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_COMMON_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_COMMON_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_COMMON_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_COMMON_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_COMMON_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_COMMON_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_COMMON_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_6 (*(pREG32 (0x40044000)))
+#define IOCON_PIO2_6_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_6_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_6_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_6_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_6_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_6_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_6_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_6_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_6_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_6_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_0 (*(pREG32 (0x40044008)))
+#define IOCON_PIO2_0_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_0_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_0_FUNC_DTR ((unsigned int) 0x00000001)
+#define IOCON_PIO2_0_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_0_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_0_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_0_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_0_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_0_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_0_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_0_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_nRESET_PIO0_0 (*(pREG32 (0x4004400C)))
+#define IOCON_nRESET_PIO0_0_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_nRESET_PIO0_0_FUNC_RESET ((unsigned int) 0x00000000)
+#define IOCON_nRESET_PIO0_0_FUNC_GPIO ((unsigned int) 0x00000001)
+#define IOCON_nRESET_PIO0_0_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_nRESET_PIO0_0_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_nRESET_PIO0_0_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_nRESET_PIO0_0_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_nRESET_PIO0_0_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_nRESET_PIO0_0_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_nRESET_PIO0_0_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_nRESET_PIO0_0_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO0_1 (*(pREG32 (0x40044010)))
+#define IOCON_PIO0_1_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO0_1_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO0_1_FUNC_CLKOUT ((unsigned int) 0x00000001)
+#define IOCON_PIO0_1_FUNC_CT32B0_MAT2 ((unsigned int) 0x00000002)
+#define IOCON_PIO0_1_FUNC_USB_FTOGGLE ((unsigned int) 0x00000003)
+#define IOCON_PIO0_1_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO0_1_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_1_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO0_1_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO0_1_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO0_1_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO0_1_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_1_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO1_8 (*(pREG32 (0x40044014)))
+#define IOCON_PIO1_8_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO1_8_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO1_8_FUNC_CT16B1_CAP0 ((unsigned int) 0x00000001)
+#define IOCON_PIO1_8_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO1_8_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_8_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO1_8_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO1_8_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO1_8_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO1_8_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_8_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO0_2 (*(pREG32 (0x4004401C)))
+#define IOCON_PIO0_2_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO0_2_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO0_2_FUNC_SSEL ((unsigned int) 0x00000001)
+#define IOCON_PIO0_2_FUNC_CT16B0_CAP0 ((unsigned int) 0x00000002)
+#define IOCON_PIO0_2_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO0_2_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_2_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO0_2_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO0_2_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO0_2_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO0_2_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_2_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_7 (*(pREG32 (0x40044020)))
+#define IOCON_PIO2_7_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_7_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_7_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_7_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_7_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_7_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_7_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_7_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_7_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_7_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_8 (*(pREG32 (0x40044024)))
+#define IOCON_PIO2_8_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_8_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_8_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_8_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_8_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_8_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_8_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_8_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_8_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_8_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_1 (*(pREG32 (0x40044028)))
+#define IOCON_PIO2_1_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_1_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_1_FUNC_DSR ((unsigned int) 0x00000001)
+#define IOCON_PIO2_1_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_1_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_1_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_1_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_1_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_1_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_1_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_1_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO0_3 (*(pREG32 (0x4004402C)))
+#define IOCON_PIO0_3_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO0_3_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO0_3_FUNC_USB_VBUS ((unsigned int) 0x00000001)
+#define IOCON_PIO0_3_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO0_3_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_3_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO0_3_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO0_3_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO0_3_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO0_3_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_3_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO0_4 (*(pREG32 (0x40044030)))
+#define IOCON_PIO0_4_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO0_4_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO0_4_FUNC_I2CSCL ((unsigned int) 0x00000001)
+#define IOCON_PIO0_4_I2CMODE_MASK ((unsigned int) 0x00000300)
+#define IOCON_PIO0_4_I2CMODE_STANDARDI2C ((unsigned int) 0x00000000)
+#define IOCON_PIO0_4_I2CMODE_STANDARDIO ((unsigned int) 0x00000100)
+#define IOCON_PIO0_4_I2CMODE_FASTPLUSI2C ((unsigned int) 0x00000200)
+
+#define IOCON_PIO0_5 (*(pREG32 (0x40044034)))
+#define IOCON_PIO0_5_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO0_5_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO0_5_FUNC_I2CSDA ((unsigned int) 0x00000001)
+#define IOCON_PIO0_5_I2CMODE_MASK ((unsigned int) 0x00000300)
+#define IOCON_PIO0_5_I2CMODE_STANDARDI2C ((unsigned int) 0x00000000)
+#define IOCON_PIO0_5_I2CMODE_STANDARDIO ((unsigned int) 0x00000100)
+#define IOCON_PIO0_5_I2CMODE_FASTPLUSI2C ((unsigned int) 0x00000200)
+
+#define IOCON_PIO1_9 (*(pREG32 (0x40044038)))
+#define IOCON_PIO1_9_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO1_9_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO1_9_FUNC_CT16B1_MAT0 ((unsigned int) 0x00000001)
+#define IOCON_PIO1_9_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO1_9_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_9_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO1_9_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO1_9_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO1_9_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO1_9_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_9_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO3_4 (*(pREG32 (0x4004403C)))
+#define IOCON_PIO3_4_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO3_4_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO3_4_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO3_4_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_4_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO3_4_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO3_4_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO3_4_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO3_4_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_4_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_4 (*(pREG32 (0x40044040)))
+#define IOCON_PIO2_4_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_4_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_4_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_4_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_4_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_4_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_4_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_4_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_4_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_4_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_5 (*(pREG32 (0x40044044)))
+#define IOCON_PIO2_5_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_5_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_5_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_5_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_5_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_5_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_5_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_5_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_5_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_5_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO3_5 (*(pREG32 (0x40044048)))
+#define IOCON_PIO3_5_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO3_5_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO3_5_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO3_5_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_5_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO3_5_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO3_5_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO3_5_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO3_5_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_5_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO0_6 (*(pREG32 (0x4004404C)))
+#define IOCON_PIO0_6_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO0_6_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO0_6_FUNC_USB_CONNECT ((unsigned int) 0x00000001)
+#define IOCON_PIO0_6_FUNC_SCK ((unsigned int) 0x00000002)
+#define IOCON_PIO0_6_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO0_6_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_6_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO0_6_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO0_6_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO0_6_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO0_6_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_6_HYS_ENABLE ((unsigned int) 0x00000020)
+
+
+#define IOCON_PIO0_7 (*(pREG32 (0x40044050)))
+#define IOCON_PIO0_7_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO0_7_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO0_7_FUNC_CTS ((unsigned int) 0x00000001)
+#define IOCON_PIO0_7_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO0_7_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_7_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO0_7_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO0_7_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO0_7_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO0_7_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_7_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_9 (*(pREG32 (0x40044054)))
+#define IOCON_PIO2_9_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_9_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_9_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_9_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_9_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_9_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_9_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_9_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_9_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_9_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_10 (*(pREG32 (0x40044058)))
+#define IOCON_PIO2_10_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_10_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_10_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_10_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_10_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_10_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_10_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_10_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_10_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_10_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_2 (*(pREG32 (0x4004405C)))
+#define IOCON_PIO2_2_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_2_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_2_FUNC_DCD ((unsigned int) 0x00000001)
+#define IOCON_PIO2_2_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_2_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_2_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_2_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_2_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_2_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_2_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_2_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO0_8 (*(pREG32 (0x40044060)))
+#define IOCON_PIO0_8_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO0_8_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO0_8_FUNC_MISO0 ((unsigned int) 0x00000001)
+#define IOCON_PIO0_8_FUNC_CT16B0_MAT0 ((unsigned int) 0x00000002)
+#define IOCON_PIO0_8_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO0_8_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_8_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO0_8_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO0_8_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO0_8_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO0_8_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_8_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO0_9 (*(pREG32 (0x40044064)))
+#define IOCON_PIO0_9_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO0_9_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO0_9_FUNC_MOSI0 ((unsigned int) 0x00000001)
+#define IOCON_PIO0_9_FUNC_CT16B0_MAT1 ((unsigned int) 0x00000002)
+#define IOCON_PIO0_9_FUNC_SWO ((unsigned int) 0x00000003)
+#define IOCON_PIO0_9_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO0_9_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_9_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO0_9_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO0_9_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO0_9_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO0_9_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO0_9_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_JTAG_TCK_PIO0_10 (*(pREG32 (0x40044068)))
+#define IOCON_JTAG_TCK_PIO0_10_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_JTAG_TCK_PIO0_10_FUNC_SWCLK ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TCK_PIO0_10_FUNC_GPIO ((unsigned int) 0x00000001)
+#define IOCON_JTAG_TCK_PIO0_10_FUNC_SCK ((unsigned int) 0x00000002)
+#define IOCON_JTAG_TCK_PIO0_10_FUNC_CT16B0_MAT2 ((unsigned int) 0x00000003)
+#define IOCON_JTAG_TCK_PIO0_10_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_JTAG_TCK_PIO0_10_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TCK_PIO0_10_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_JTAG_TCK_PIO0_10_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_JTAG_TCK_PIO0_10_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_JTAG_TCK_PIO0_10_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_JTAG_TCK_PIO0_10_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TCK_PIO0_10_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO1_10 (*(pREG32 (0x4004406C)))
+#define IOCON_PIO1_10_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO1_10_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO1_10_FUNC_AD6 ((unsigned int) 0x00000001)
+#define IOCON_PIO1_10_FUNC_CT16B1_MAT1 ((unsigned int) 0x00000002)
+#define IOCON_PIO1_10_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO1_10_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_10_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO1_10_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO1_10_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO1_10_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO1_10_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_10_HYS_ENABLE ((unsigned int) 0x00000020)
+#define IOCON_PIO1_10_ADMODE_MASK ((unsigned int) 0x00000080)
+#define IOCON_PIO1_10_ADMODE_ANALOG ((unsigned int) 0x00000000)
+#define IOCON_PIO1_10_ADMODE_DIGITAL ((unsigned int) 0x00000080)
+
+#define IOCON_PIO2_11 (*(pREG32 (0x40044070)))
+#define IOCON_PIO2_11_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO2_11_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO2_11_FUNC_SCK0 ((unsigned int) 0x00000001)
+#define IOCON_PIO2_11_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO2_11_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_11_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO2_11_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO2_11_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO2_11_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO2_11_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO2_11_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_JTAG_TDI_PIO0_11 (*(pREG32 (0x40044074)))
+#define IOCON_JTAG_TDI_PIO0_11_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_JTAG_TDI_PIO0_11_FUNC_TDI ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TDI_PIO0_11_FUNC_GPIO ((unsigned int) 0x00000001)
+#define IOCON_JTAG_TDI_PIO0_11_FUNC_AD0 ((unsigned int) 0x00000002)
+#define IOCON_JTAG_TDI_PIO0_11_FUNC_CT32B0_MAT3 ((unsigned int) 0x00000003)
+#define IOCON_JTAG_TDI_PIO0_11_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_JTAG_TDI_PIO0_11_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TDI_PIO0_11_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_JTAG_TDI_PIO0_11_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_JTAG_TDI_PIO0_11_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_JTAG_TDI_PIO0_11_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_JTAG_TDI_PIO0_11_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TDI_PIO0_11_HYS_ENABLE ((unsigned int) 0x00000020)
+#define IOCON_JTAG_TDI_PIO0_11_ADMODE_MASK ((unsigned int) 0x00000080)
+#define IOCON_JTAG_TDI_PIO0_11_ADMODE_ANALOG ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TDI_PIO0_11_ADMODE_DIGITAL ((unsigned int) 0x00000080)
+
+#define IOCON_JTAG_TMS_PIO1_0 (*(pREG32 (0x40044078)))
+#define IOCON_JTAG_TMS_PIO1_0_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_JTAG_TMS_PIO1_0_FUNC_TMS ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TMS_PIO1_0_FUNC_GPIO ((unsigned int) 0x00000001)
+#define IOCON_JTAG_TMS_PIO1_0_FUNC_AD1 ((unsigned int) 0x00000002)
+#define IOCON_JTAG_TMS_PIO1_0_FUNC_CT32B1_CAP0 ((unsigned int) 0x00000003)
+#define IOCON_JTAG_TMS_PIO1_0_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_JTAG_TMS_PIO1_0_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TMS_PIO1_0_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_JTAG_TMS_PIO1_0_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_JTAG_TMS_PIO1_0_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_JTAG_TMS_PIO1_0_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_JTAG_TMS_PIO1_0_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TMS_PIO1_0_HYS_ENABLE ((unsigned int) 0x00000020)
+#define IOCON_JTAG_TMS_PIO1_0_ADMODE_MASK ((unsigned int) 0x00000080)
+#define IOCON_JTAG_TMS_PIO1_0_ADMODE_ANALOG ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TMS_PIO1_0_ADMODE_DIGITAL ((unsigned int) 0x00000080)
+
+#define IOCON_JTAG_TDO_PIO1_1 (*(pREG32 (0x4004407C)))
+#define IOCON_JTAG_TDO_PIO1_1_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_JTAG_TDO_PIO1_1_FUNC_TDO ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TDO_PIO1_1_FUNC_GPIO ((unsigned int) 0x00000001)
+#define IOCON_JTAG_TDO_PIO1_1_FUNC_AD2 ((unsigned int) 0x00000002)
+#define IOCON_JTAG_TDO_PIO1_1_FUNC_CT32B1_MAT0 ((unsigned int) 0x00000003)
+#define IOCON_JTAG_TDO_PIO1_1_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_JTAG_TDO_PIO1_1_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TDO_PIO1_1_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_JTAG_TDO_PIO1_1_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_JTAG_TDO_PIO1_1_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_JTAG_TDO_PIO1_1_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_JTAG_TDO_PIO1_1_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TDO_PIO1_1_HYS_ENABLE ((unsigned int) 0x00000020)
+#define IOCON_JTAG_TDO_PIO1_1_ADMODE_MASK ((unsigned int) 0x00000080)
+#define IOCON_JTAG_TDO_PIO1_1_ADMODE_ANALOG ((unsigned int) 0x00000000)
+#define IOCON_JTAG_TDO_PIO1_1_ADMODE_DIGITAL ((unsigned int) 0x00000080)
+
+#define IOCON_JTAG_nTRST_PIO1_2 (*(pREG32 (0x40044080)))
+#define IOCON_JTAG_nTRST_PIO1_2_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_JTAG_nTRST_PIO1_2_FUNC_TRST ((unsigned int) 0x00000000)
+#define IOCON_JTAG_nTRST_PIO1_2_FUNC_GPIO ((unsigned int) 0x00000001)
+#define IOCON_JTAG_nTRST_PIO1_2_FUNC_AD3 ((unsigned int) 0x00000002)
+#define IOCON_JTAG_nTRST_PIO1_2_FUNC_CT32B1_MAT1 ((unsigned int) 0x00000003)
+#define IOCON_JTAG_nTRST_PIO1_2_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_JTAG_nTRST_PIO1_2_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_nTRST_PIO1_2_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_JTAG_nTRST_PIO1_2_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_JTAG_nTRST_PIO1_2_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_JTAG_nTRST_PIO1_2_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_JTAG_nTRST_PIO1_2_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_JTAG_nTRST_PIO1_2_HYS_ENABLE ((unsigned int) 0x00000020)
+#define IOCON_JTAG_nTRST_PIO1_2_ADMODE_MASK ((unsigned int) 0x00000080)
+#define IOCON_JTAG_nTRST_PIO1_2_ADMODE_ANALOG ((unsigned int) 0x00000000)
+#define IOCON_JTAG_nTRST_PIO1_2_ADMODE_DIGITAL ((unsigned int) 0x00000080)
+
+#define IOCON_PIO3_0 (*(pREG32 (0x40044084)))
+#define IOCON_PIO3_0_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO3_0_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO3_0_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO3_0_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_0_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO3_0_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO3_0_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO3_0_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO3_0_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_0_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO3_1 (*(pREG32 (0x40044088)))
+#define IOCON_PIO3_1_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO3_1_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO3_1_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO3_1_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_1_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO3_1_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO3_1_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO3_1_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO3_1_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_1_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO2_3 (*(pREG32 (0x4004408C)))
+#define IOCON_PIO2_3_FUNC_MASK 0x7
+#define IOCON_PIO2_3_MODE_MASK 0x18
+#define IOCON_PIO2_3_HYS_MASK 0x20
+#define IOCON_PIO2_3_HYS 0x20
+
+#define IOCON_SWDIO_PIO1_3 (*(pREG32 (0x40044090)))
+#define IOCON_SWDIO_PIO1_3_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_SWDIO_PIO1_3_FUNC_SWDIO ((unsigned int) 0x00000000)
+#define IOCON_SWDIO_PIO1_3_FUNC_GPIO ((unsigned int) 0x00000001)
+#define IOCON_SWDIO_PIO1_3_FUNC_AD4 ((unsigned int) 0x00000002)
+#define IOCON_SWDIO_PIO1_3_FUNC_CT32B1_MAT2 ((unsigned int) 0x00000004)
+#define IOCON_SWDIO_PIO1_3_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_SWDIO_PIO1_3_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_SWDIO_PIO1_3_HYS_ENABLE ((unsigned int) 0x00000020)
+#define IOCON_SWDIO_PIO1_3_ADMODE_MASK ((unsigned int) 0x00000080)
+#define IOCON_SWDIO_PIO1_3_ADMODE_ANALOG ((unsigned int) 0x00000000)
+#define IOCON_SWDIO_PIO1_3_ADMODE_DIGITAL ((unsigned int) 0x00000080)
+
+#define IOCON_PIO1_4 (*(pREG32 (0x40044094)))
+#define IOCON_PIO1_4_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO1_4_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO1_4_FUNC_AD5 ((unsigned int) 0x00000001)
+#define IOCON_PIO1_4_FUNC_CT32B1_MAT3 ((unsigned int) 0x00000002)
+#define IOCON_PIO1_4_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO1_4_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_4_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO1_4_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO1_4_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO1_4_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO1_4_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_4_HYS_ENABLE ((unsigned int) 0x00000020)
+#define IOCON_PIO1_4_ADMODE_MASK ((unsigned int) 0x00000080)
+#define IOCON_PIO1_4_ADMODE_ANALOG ((unsigned int) 0x00000000)
+#define IOCON_PIO1_4_ADMODE_DIGITAL ((unsigned int) 0x00000080)
+
+#define IOCON_PIO1_11 (*(pREG32 (0x40044098)))
+#define IOCON_PIO1_11_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO1_11_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO1_11_FUNC_AD7 ((unsigned int) 0x00000001)
+#define IOCON_PIO1_11_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO1_11_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_11_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO1_11_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO1_11_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO1_11_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO1_11_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_11_HYS_ENABLE ((unsigned int) 0x00000020)
+#define IOCON_PIO1_11_ADMODE_MASK ((unsigned int) 0x00000080)
+#define IOCON_PIO1_11_ADMODE_ANALOG ((unsigned int) 0x00000000)
+#define IOCON_PIO1_11_ADMODE_DIGITAL ((unsigned int) 0x00000080)
+
+#define IOCON_PIO3_2 (*(pREG32 (0x4004409C)))
+#define IOCON_PIO3_2_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO3_2_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO3_2_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO3_2_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_2_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO3_2_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO3_2_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO3_2_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO3_2_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_2_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO1_5 (*(pREG32 (0x400440A0)))
+#define IOCON_PIO1_5_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO1_5_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO1_5_FUNC_RTS ((unsigned int) 0x00000001)
+#define IOCON_PIO1_5_FUNC_CT32B0_CAP0 ((unsigned int) 0x00000002)
+#define IOCON_PIO1_5_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO1_5_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_5_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO1_5_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO1_5_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO1_5_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO1_5_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_5_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO1_6 (*(pREG32 (0x400440A4)))
+#define IOCON_PIO1_6_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO1_6_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO1_6_FUNC_UART_RXD ((unsigned int) 0x00000001)
+#define IOCON_PIO1_6_FUNC_CT32B0_MAT0 ((unsigned int) 0x00000002)
+#define IOCON_PIO1_6_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO1_6_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_6_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO1_6_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO1_6_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO1_6_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO1_6_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_6_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO1_7 (*(pREG32 (0x400440A8)))
+#define IOCON_PIO1_7_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO1_7_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO1_7_FUNC_UART_TXD ((unsigned int) 0x00000001)
+#define IOCON_PIO1_7_FUNC_CT32B0_MAT1 ((unsigned int) 0x00000002)
+#define IOCON_PIO1_7_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO1_7_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_7_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO1_7_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO1_7_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO1_7_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO1_7_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO1_7_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_PIO3_3 (*(pREG32 (0x400440AC)))
+#define IOCON_PIO3_3_FUNC_MASK ((unsigned int) 0x00000007)
+#define IOCON_PIO3_3_FUNC_GPIO ((unsigned int) 0x00000000)
+#define IOCON_PIO3_3_MODE_MASK ((unsigned int) 0x00000018)
+#define IOCON_PIO3_3_MODE_INACTIVE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_3_MODE_PULLDOWN ((unsigned int) 0x00000008)
+#define IOCON_PIO3_3_MODE_PULLUP ((unsigned int) 0x00000010)
+#define IOCON_PIO3_3_MODE_REPEATER ((unsigned int) 0x00000018)
+#define IOCON_PIO3_3_HYS_MASK ((unsigned int) 0x00000020)
+#define IOCON_PIO3_3_HYS_DISABLE ((unsigned int) 0x00000000)
+#define IOCON_PIO3_3_HYS_ENABLE ((unsigned int) 0x00000020)
+
+#define IOCON_SCKLOC (*(pREG32 (0x400440B0)))
+#define IOCON_SCKLOC_SCKPIN_MASK ((unsigned int) 0x00000003)
+#define IOCON_SCKLOC_SCKPIN_PIO0_10 ((unsigned int) 0x00000000) // Set SCK function to pin 0.10
+#define IOCON_SCKLOC_SCKPIN_PIO2_11 ((unsigned int) 0x00000001) // Set SCK function to pin 2.11
+#define IOCON_SCKLOC_SCKPIN_PIO0_6 ((unsigned int) 0x00000003) // Set SCK function to pin 0.6
+
+/*##############################################################################
+## Nested Vectored Interrupt Controller
+##############################################################################*/
+
+#define NVIC_BASE_ADDRESS (0xE000E100)
+
+typedef struct
+{
+ volatile uint32_t ISER[8]; /*!< Offset: 0x000 Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ volatile uint32_t ICER[8]; /*!< Offset: 0x080 Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ volatile uint32_t ISPR[8]; /*!< Offset: 0x100 Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ volatile uint32_t ICPR[8]; /*!< Offset: 0x180 Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ volatile uint32_t IABR[8]; /*!< Offset: 0x200 Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ volatile uint8_t IP[240]; /*!< Offset: 0x300 Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ volatile uint32_t STIR; /*!< Offset: 0xE00 Software Trigger Interrupt Register */
+} NVIC_Type;
+
+#define NVIC ((NVIC_Type *) NVIC_BASE_ADDRESS)
+
+static inline void __enable_irq() { __asm volatile ("cpsie i"); }
+static inline void __disable_irq() { __asm volatile ("cpsid i"); }
+
+typedef enum IRQn
+{
+/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** LPC13xx Specific Interrupt Numbers *******************************************************/
+ WAKEUP0_IRQn = 0, /*!< All I/O pins can be used as wakeup source. */
+ WAKEUP1_IRQn = 1, /*!< There are 40 pins in total for LPC17xx */
+ WAKEUP2_IRQn = 2,
+ WAKEUP3_IRQn = 3,
+ WAKEUP4_IRQn = 4,
+ WAKEUP5_IRQn = 5,
+ WAKEUP6_IRQn = 6,
+ WAKEUP7_IRQn = 7,
+ WAKEUP8_IRQn = 8,
+ WAKEUP9_IRQn = 9,
+ WAKEUP10_IRQn = 10,
+ WAKEUP11_IRQn = 11,
+ WAKEUP12_IRQn = 12,
+ WAKEUP13_IRQn = 13,
+ WAKEUP14_IRQn = 14,
+ WAKEUP15_IRQn = 15,
+ WAKEUP16_IRQn = 16,
+ WAKEUP17_IRQn = 17,
+ WAKEUP18_IRQn = 18,
+ WAKEUP19_IRQn = 19,
+ WAKEUP20_IRQn = 20,
+ WAKEUP21_IRQn = 21,
+ WAKEUP22_IRQn = 22,
+ WAKEUP23_IRQn = 23,
+ WAKEUP24_IRQn = 24,
+ WAKEUP25_IRQn = 25,
+ WAKEUP26_IRQn = 26,
+ WAKEUP27_IRQn = 27,
+ WAKEUP28_IRQn = 28,
+ WAKEUP29_IRQn = 29,
+ WAKEUP30_IRQn = 30,
+ WAKEUP31_IRQn = 31,
+ WAKEUP32_IRQn = 32,
+ WAKEUP33_IRQn = 33,
+ WAKEUP34_IRQn = 34,
+ WAKEUP35_IRQn = 35,
+ WAKEUP36_IRQn = 36,
+ WAKEUP37_IRQn = 37,
+ WAKEUP38_IRQn = 38,
+ WAKEUP39_IRQn = 39,
+ I2C_IRQn = 40, /*!< I2C Interrupt */
+ TIMER_16_0_IRQn = 41, /*!< 16-bit Timer0 Interrupt */
+ TIMER_16_1_IRQn = 42, /*!< 16-bit Timer1 Interrupt */
+ TIMER_32_0_IRQn = 43, /*!< 32-bit Timer0 Interrupt */
+ TIMER_32_1_IRQn = 44, /*!< 32-bit Timer1 Interrupt */
+ SSP_IRQn = 45, /*!< SSP Interrupt */
+ UART_IRQn = 46, /*!< UART Interrupt */
+ USB_IRQn = 47, /*!< USB Regular Interrupt */
+ USB_FIQn = 48, /*!< USB Fast Interrupt */
+ ADC_IRQn = 49, /*!< A/D Converter Interrupt */
+ WDT_IRQn = 50, /*!< Watchdog timer Interrupt */
+ BOD_IRQn = 51, /*!< Brown Out Detect(BOD) Interrupt */
+ EINT3_IRQn = 53, /*!< External Interrupt 3 Interrupt */
+ EINT2_IRQn = 54, /*!< External Interrupt 2 Interrupt */
+ EINT1_IRQn = 55, /*!< External Interrupt 1 Interrupt */
+ EINT0_IRQn = 56, /*!< External Interrupt 0 Interrupt */
+} IRQn_t;
+
+static inline void NVIC_EnableIRQ(IRQn_t IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+static inline void NVIC_DisableIRQ(IRQn_t IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+/*##############################################################################
+## GPIO - General Purpose I/O
+##############################################################################*/
+
+#define GPIO_GPIO0_BASE (0x50000000)
+#define GPIO_GPIO1_BASE (0x50010000)
+#define GPIO_GPIO2_BASE (0x50020000)
+#define GPIO_GPIO3_BASE (0x50030000)
+
+#define GPIO_GPIO0DATA (*(pREG32 (0x50003FFC))) // Port data register
+#define GPIO_GPIO0DIR (*(pREG32 (0x50008000))) // Data direction register
+#define GPIO_GPIO0IS (*(pREG32 (0x50008004))) // Interrupt sense register
+#define GPIO_GPIO0IBE (*(pREG32 (0x50008008))) // Interrupt both edges register
+#define GPIO_GPIO0IEV (*(pREG32 (0x5000800C))) // Interrupt event register
+#define GPIO_GPIO0IE (*(pREG32 (0x50008010))) // Interrupt mask register
+#define GPIO_GPIO0RIS (*(pREG32 (0x50008014))) // Raw interrupt status register
+#define GPIO_GPIO0MIS (*(pREG32 (0x50008018))) // Masked interrupt status register
+#define GPIO_GPIO0IC (*(pREG32 (0x5000801C))) // Interrupt clear register
+
+#define GPIO_GPIO1DATA (*(pREG32 (0x50013FFC))) // Port data register
+#define GPIO_GPIO1DIR (*(pREG32 (0x50018000))) // Data direction register
+#define GPIO_GPIO1IS (*(pREG32 (0x50018004))) // Interrupt sense register
+#define GPIO_GPIO1IBE (*(pREG32 (0x50018008))) // Interrupt both edges register
+#define GPIO_GPIO1IEV (*(pREG32 (0x5001800C))) // Interrupt event register
+#define GPIO_GPIO1IE (*(pREG32 (0x50018010))) // Interrupt mask register
+#define GPIO_GPIO1RIS (*(pREG32 (0x50018014))) // Raw interrupt status register
+#define GPIO_GPIO1MIS (*(pREG32 (0x50018018))) // Masked interrupt status register
+#define GPIO_GPIO1IC (*(pREG32 (0x5001801C))) // Interrupt clear register
+
+#define GPIO_GPIO2DATA (*(pREG32 (0x50023FFC))) // Port data register
+#define GPIO_GPIO2DIR (*(pREG32 (0x50028000))) // Data direction register
+#define GPIO_GPIO2IS (*(pREG32 (0x50028004))) // Interrupt sense register
+#define GPIO_GPIO2IBE (*(pREG32 (0x50028008))) // Interrupt both edges register
+#define GPIO_GPIO2IEV (*(pREG32 (0x5002800C))) // Interrupt event register
+#define GPIO_GPIO2IE (*(pREG32 (0x50028010))) // Interrupt mask register
+#define GPIO_GPIO2RIS (*(pREG32 (0x50028014))) // Raw interrupt status register
+#define GPIO_GPIO2MIS (*(pREG32 (0x50028018))) // Masked interrupt status register
+#define GPIO_GPIO2IC (*(pREG32 (0x5002801C))) // Interrupt clear register
+
+#define GPIO_GPIO3DATA (*(pREG32 (0x50033FFC))) // Port data register
+#define GPIO_GPIO3DIR (*(pREG32 (0x50038000))) // Data direction register
+#define GPIO_GPIO3IS (*(pREG32 (0x50038004))) // Interrupt sense register
+#define GPIO_GPIO3IBE (*(pREG32 (0x50038008))) // Interrupt both edges register
+#define GPIO_GPIO3IEV (*(pREG32 (0x5003800C))) // Interrupt event register
+#define GPIO_GPIO3IE (*(pREG32 (0x50038010))) // Interrupt mask register
+#define GPIO_GPIO3RIS (*(pREG32 (0x50038014))) // Raw interrupt status register
+#define GPIO_GPIO3MIS (*(pREG32 (0x50038018))) // Masked interrupt status register
+#define GPIO_GPIO3IC (*(pREG32 (0x5003801C))) // Interrupt clear register
+
+#define GPIO_IO_P0 ((unsigned int) 0x00000001)
+#define GPIO_IO_P1 ((unsigned int) 0x00000002)
+#define GPIO_IO_P2 ((unsigned int) 0x00000004)
+#define GPIO_IO_P3 ((unsigned int) 0x00000008)
+#define GPIO_IO_P4 ((unsigned int) 0x00000010)
+#define GPIO_IO_P5 ((unsigned int) 0x00000020)
+#define GPIO_IO_P6 ((unsigned int) 0x00000040)
+#define GPIO_IO_P7 ((unsigned int) 0x00000080)
+#define GPIO_IO_P8 ((unsigned int) 0x00000100)
+#define GPIO_IO_P9 ((unsigned int) 0x00000200)
+#define GPIO_IO_P10 ((unsigned int) 0x00000400)
+#define GPIO_IO_P11 ((unsigned int) 0x00000800)
+#define GPIO_IO_ALL ((unsigned int) 0x00000FFF)
+
+/*##############################################################################
+## USB
+##############################################################################*/
+
+/* USB registers are defined in USB code */
+#define USB_BASE_ADDRESS (0x40020000)
+
+/* USB Device Interrupt Status Register */
+#define USB_DEVINTST (*(pREG32 (0x40020000)))
+#define USB_DEVINTST_FRAME_MASK ((unsigned int) 0x00000001)
+#define USB_DEVINTST_FRAME ((unsigned int) 0x00000001) // Frame interrupt
+#define USB_DEVINTST_EP0_MASK ((unsigned int) 0x00000002)
+#define USB_DEVINTST_EP0 ((unsigned int) 0x00000002) // USB core interrupt for EP0
+#define USB_DEVINTST_EP1_MASK ((unsigned int) 0x00000004)
+#define USB_DEVINTST_EP1 ((unsigned int) 0x00000004) // USB core interrupt for EP1
+#define USB_DEVINTST_EP2_MASK ((unsigned int) 0x00000008)
+#define USB_DEVINTST_EP2 ((unsigned int) 0x00000008) // USB core interrupt for EP2
+#define USB_DEVINTST_EP3_MASK ((unsigned int) 0x00000010)
+#define USB_DEVINTST_EP3 ((unsigned int) 0x00000010) // USB core interrupt for EP3
+#define USB_DEVINTST_EP4_MASK ((unsigned int) 0x00000020)
+#define USB_DEVINTST_EP4 ((unsigned int) 0x00000020) // USB core interrupt for EP4
+#define USB_DEVINTST_EP5_MASK ((unsigned int) 0x00000040)
+#define USB_DEVINTST_EP5 ((unsigned int) 0x00000040) // USB core interrupt for EP5
+#define USB_DEVINTST_EP6_MASK ((unsigned int) 0x00000080)
+#define USB_DEVINTST_EP6 ((unsigned int) 0x00000080) // USB core interrupt for EP6
+#define USB_DEVINTST_EP7_MASK ((unsigned int) 0x00000100)
+#define USB_DEVINTST_EP7 ((unsigned int) 0x00000100) // USB core interrupt for EP7
+#define USB_DEVINTST_DEV_START_MASK ((unsigned int) 0x00000200)
+#define USB_DEVINTST_DEV_START ((unsigned int) 0x00000200)
+#define USB_DEVINTST_CC_EMPTY_MASK ((unsigned int) 0x00000400)
+#define USB_DEVINTST_CC_EMPTY ((unsigned int) 0x00000400)
+#define USB_DEVINTST_CD_FULL_MASK ((unsigned int) 0x00000800)
+#define USB_DEVINTST_CD_FULL ((unsigned int) 0x00000800)
+#define USB_DEVINTST_RxENDPKT_MASK ((unsigned int) 0x00001000)
+#define USB_DEVINTST_RxENDPKT ((unsigned int) 0x00001000)
+#define USB_DEVINTST_TxENDPKT_MASK ((unsigned int) 0x00002000)
+#define USB_DEVINTST_TxENDPKT ((unsigned int) 0x00002000)
+
+/* USB Device Interrupt Enable Register */
+#define USB_DEVINTEN (*(pREG32 (0x40020004)))
+#define USB_DEVINTEN_FRAME_MASK ((unsigned int) 0x00000001)
+#define USB_DEVINTEN_FRAME ((unsigned int) 0x00000001)
+#define USB_DEVINTEN_EP0_MASK ((unsigned int) 0x00000002)
+#define USB_DEVINTEN_EP0 ((unsigned int) 0x00000002)
+#define USB_DEVINTEN_EP1_MASK ((unsigned int) 0x00000004)
+#define USB_DEVINTEN_EP1 ((unsigned int) 0x00000004)
+#define USB_DEVINTEN_EP2_MASK ((unsigned int) 0x00000008)
+#define USB_DEVINTEN_EP2 ((unsigned int) 0x00000008)
+#define USB_DEVINTEN_EP3_MASK ((unsigned int) 0x00000010)
+#define USB_DEVINTEN_EP3 ((unsigned int) 0x00000010)
+#define USB_DEVINTEN_EP4_MASK ((unsigned int) 0x00000020)
+#define USB_DEVINTEN_EP4 ((unsigned int) 0x00000020)
+#define USB_DEVINTEN_EP5_MASK ((unsigned int) 0x00000040)
+#define USB_DEVINTEN_EP5 ((unsigned int) 0x00000040)
+#define USB_DEVINTEN_EP6_MASK ((unsigned int) 0x00000080)
+#define USB_DEVINTEN_EP6 ((unsigned int) 0x00000080)
+#define USB_DEVINTEN_EP7_MASK ((unsigned int) 0x00000100)
+#define USB_DEVINTEN_EP7 ((unsigned int) 0x00000100)
+#define USB_DEVINTEN_DEV_START_MASK ((unsigned int) 0x00000200)
+#define USB_DEVINTEN_DEV_START ((unsigned int) 0x00000200)
+#define USB_DEVINTEN_CC_EMPTY_MASK ((unsigned int) 0x00000400)
+#define USB_DEVINTEN_CC_EMPTY ((unsigned int) 0x00000400)
+#define USB_DEVINTEN_CD_FULL_MASK ((unsigned int) 0x00000800)
+#define USB_DEVINTEN_CD_FULL ((unsigned int) 0x00000800)
+#define USB_DEVINTEN_RxENDPKT_MASK ((unsigned int) 0x00001000)
+#define USB_DEVINTEN_RxENDPKT ((unsigned int) 0x00001000)
+#define USB_DEVINTEN_TxENDPKT_MASK ((unsigned int) 0x00002000)
+#define USB_DEVINTEN_TxENDPKT ((unsigned int) 0x00002000)
+
+/* USB Device Interrupt Clear Register */
+#define USB_DEVINTCLR (*(pREG32 (0x40020008)))
+#define USB_DEVINTCLR_FRAME_MASK ((unsigned int) 0x00000001)
+#define USB_DEVINTCLR_FRAME ((unsigned int) 0x00000001)
+#define USB_DEVINTCLR_EP0_MASK ((unsigned int) 0x00000002)
+#define USB_DEVINTCLR_EP0 ((unsigned int) 0x00000002)
+#define USB_DEVINTCLR_EP1_MASK ((unsigned int) 0x00000004)
+#define USB_DEVINTCLR_EP1 ((unsigned int) 0x00000004)
+#define USB_DEVINTCLR_EP2_MASK ((unsigned int) 0x00000008)
+#define USB_DEVINTCLR_EP2 ((unsigned int) 0x00000008)
+#define USB_DEVINTCLR_EP3_MASK ((unsigned int) 0x00000010)
+#define USB_DEVINTCLR_EP3 ((unsigned int) 0x00000010)
+#define USB_DEVINTCLR_EP4_MASK ((unsigned int) 0x00000020)
+#define USB_DEVINTCLR_EP4 ((unsigned int) 0x00000020)
+#define USB_DEVINTCLR_EP5_MASK ((unsigned int) 0x00000040)
+#define USB_DEVINTCLR_EP5 ((unsigned int) 0x00000040)
+#define USB_DEVINTCLR_EP6_MASK ((unsigned int) 0x00000080)
+#define USB_DEVINTCLR_EP6 ((unsigned int) 0x00000080)
+#define USB_DEVINTCLR_EP7_MASK ((unsigned int) 0x00000100)
+#define USB_DEVINTCLR_EP7 ((unsigned int) 0x00000100)
+#define USB_DEVINTCLR_DEV_START_MASK ((unsigned int) 0x00000200)
+#define USB_DEVINTCLR_DEV_START ((unsigned int) 0x00000200)
+#define USB_DEVINTCLR_CC_EMPTY_MASK ((unsigned int) 0x00000400)
+#define USB_DEVINTCLR_CC_EMPTY ((unsigned int) 0x00000400)
+#define USB_DEVINTCLR_CD_FULL_MASK ((unsigned int) 0x00000800)
+#define USB_DEVINTCLR_CD_FULL ((unsigned int) 0x00000800)
+#define USB_DEVINTCLR_RxENDPKT_MASK ((unsigned int) 0x00001000)
+#define USB_DEVINTCLR_RxENDPKT ((unsigned int) 0x00001000)
+#define USB_DEVINTCLR_TxENDPKT_MASK ((unsigned int) 0x00002000)
+#define USB_DEVINTCLR_TxENDPKT ((unsigned int) 0x00002000)
+
+/* USB Device Interrupt Set Register */
+#define USB_DEVINTSET (*(pREG32 (0x4002000C)))
+#define USB_DEVINTSET_FRAME_MASK ((unsigned int) 0x00000001)
+#define USB_DEVINTSET_FRAME ((unsigned int) 0x00000001)
+#define USB_DEVINTSET_EP0_MASK ((unsigned int) 0x00000002)
+#define USB_DEVINTSET_EP0 ((unsigned int) 0x00000002)
+#define USB_DEVINTSET_EP1_MASK ((unsigned int) 0x00000004)
+#define USB_DEVINTSET_EP1 ((unsigned int) 0x00000004)
+#define USB_DEVINTSET_EP2_MASK ((unsigned int) 0x00000008)
+#define USB_DEVINTSET_EP2 ((unsigned int) 0x00000008)
+#define USB_DEVINTSET_EP3_MASK ((unsigned int) 0x00000010)
+#define USB_DEVINTSET_EP3 ((unsigned int) 0x00000010)
+#define USB_DEVINTSET_EP4_MASK ((unsigned int) 0x00000020)
+#define USB_DEVINTSET_EP4 ((unsigned int) 0x00000020)
+#define USB_DEVINTSET_EP5_MASK ((unsigned int) 0x00000040)
+#define USB_DEVINTSET_EP5 ((unsigned int) 0x00000040)
+#define USB_DEVINTSET_EP6_MASK ((unsigned int) 0x00000080)
+#define USB_DEVINTSET_EP6 ((unsigned int) 0x00000080)
+#define USB_DEVINTSET_EP7_MASK ((unsigned int) 0x00000100)
+#define USB_DEVINTSET_EP7 ((unsigned int) 0x00000100)
+#define USB_DEVINTSET_DEV_START_MASK ((unsigned int) 0x00000200)
+#define USB_DEVINTSET_DEV_START ((unsigned int) 0x00000200)
+#define USB_DEVINTSET_CC_EMPTY_MASK ((unsigned int) 0x00000400)
+#define USB_DEVINTSET_CC_EMPTY ((unsigned int) 0x00000400)
+#define USB_DEVINTSET_CD_FULL_MASK ((unsigned int) 0x00000800)
+#define USB_DEVINTSET_CD_FULL ((unsigned int) 0x00000800)
+#define USB_DEVINTSET_RxENDPKT_MASK ((unsigned int) 0x00001000)
+#define USB_DEVINTSET_RxENDPKT ((unsigned int) 0x00001000)
+#define USB_DEVINTSET_TxENDPKT_MASK ((unsigned int) 0x00002000)
+#define USB_DEVINTSET_TxENDPKT ((unsigned int) 0x00002000)
+
+/* USB Command Code Register */
+#define USB_CMDCODE (*(pREG32 (0x40020010)))
+#define USB_CMDCODE_CMD_PHASE_WRITE ((unsigned int) 0x00000100)
+#define USB_CMDCODE_CMD_PHASE_READ ((unsigned int) 0x00000200)
+#define USB_CMDCODE_CMD_PHASE_COMMAND ((unsigned int) 0x00000500)
+#define USB_CMDCODE_CMD_PHASE_MASK ((unsigned int) 0x0000FF00)
+#define USB_CMDCODE_CMD_CODE_MASK ((unsigned int) 0x00FF0000)
+#define USB_CMDCODE_CMD_WDATA_MASK ((unsigned int) 0x00FF0000)
+
+/* USB Command Data Register */
+#define USB_CMDDATA (*(pREG32 (0x40020014)))
+#define USB_CMDDATA_CMD_RDATA_MASK ((unsigned int) 0x000000FF)
+
+/* USB Receive Data Register */
+#define USB_RXDATA (*(pREG32 (0x40020018)))
+
+/* USB Transmit Data Register */
+#define USB_TXDATA (*(pREG32 (0x4002001C)))
+
+/* USB Receive Packet Length Register */
+#define USB_RXPLEN (*(pREG32 (0x40020020)))
+#define USB_RXPLEN_PKT_LNGTH_MASK ((unsigned int) 0x000003FF)
+#define USB_RXPLEN_DV_MASK ((unsigned int) 0x00000400)
+#define USB_RXPLEN_DV ((unsigned int) 0x00000400)
+
+/* USB Transmit Packet Length Register */
+#define USB_TXPLEN (*(pREG32 (0x40020024)))
+#define USB_TXPLEN_PKT_LNGTH_MASK 0x3FF
+
+/* USB Control Register */
+#define USB_CTRL (*(pREG32 (0x40020028)))
+#define USB_CTRL_RD_EN_MASK ((unsigned int) 0x00000001)
+#define USB_CTRL_RD_EN ((unsigned int) 0x00000001)
+#define USB_CTRL_WR_EN_MASK ((unsigned int) 0x00000002)
+#define USB_CTRL_WR_EN ((unsigned int) 0x00000002)
+#define USB_CTRL_LOG_ENDPOINT_MASK ((unsigned int) 0x0000003C)
+
+/* USB Device FIQ Select Register */
+#define USB_DEVFIQSEL (*(pREG32 (0x4002002C)))
+#define USB_DEVFIQSEL_FRAME_MASK ((unsigned int) 0x00000001)
+#define USB_DEVFIQSEL_FRAME ((unsigned int) 0x00000001)
+#define USB_DEVFIQSEL_BULKOUT_MASK ((unsigned int) 0x00000002)
+#define USB_DEVFIQSEL_BULKOUT ((unsigned int) 0x00000002)
+#define USB_DEVFIQSEL_BULKIN_MASK ((unsigned int) 0x00000004)
+#define USB_DEVFIQSEL_BULKIN ((unsigned int) 0x00000004)
+
+/*##############################################################################
+## UART
+##############################################################################*/
+
+#define UART_BASE_ADDRESS (0x40008000)
+
+#define UART_U0RBR (*(pREG32 (0x40008000))) // Receive buffer
+#define UART_U0THR (*(pREG32 (0x40008000))) // Transmitter holding register
+#define UART_U0DLL (*(pREG32 (0x40008000))) // Divisor latch LSB
+#define UART_U0DLM (*(pREG32 (0x40008004))) // Divisor latch MSB
+#define UART_U0IER (*(pREG32 (0x40008004))) // Interrupt enable
+#define UART_U0IIR (*(pREG32 (0x40008008))) // Interrupt identification
+#define UART_U0FCR (*(pREG32 (0x40008008))) // FIFO control
+#define UART_U0MCR (*(pREG32 (0x40008010))) // Modem control
+#define UART_U0LCR (*(pREG32 (0x4000800C))) // Line control
+#define UART_U0LSR (*(pREG32 (0x40008014))) // Line status
+#define UART_U0MSR (*(pREG32 (0x40008018))) // Modem status
+#define UART_U0SCR (*(pREG32 (0x4000801C))) // Scratch pad
+#define UART_U0ACR (*(pREG32 (0x40008020))) // Auto-baud control
+#define UART_U0FDR (*(pREG32 (0x40008028))) // Fractional divider
+#define UART_U0TER (*(pREG32 (0x40008030))) // Transmit enable
+#define UART_U0RS485CTRL (*(pREG32 (0x4000804C))) // RS485 control register
+#define UART_U0RS485ADRMATCH (*(pREG32 (0x40008050))) // RS485 address match
+#define UART_U0RS485DLY (*(pREG32 (0x40008054))) // RS485 Delay value
+#define UART_U0FIFOLVL (*(pREG32 (0x40008058))) // UART FIFO level
+
+#define UART_U0RBR_MASK ((unsigned int) 0x000000FF)
+
+#define UART_U0IER_RBR_Interrupt_MASK ((unsigned int) 0x00000001) // Enables the received data available interrupt
+#define UART_U0IER_RBR_Interrupt_Enabled ((unsigned int) 0x00000001)
+#define UART_U0IER_RBR_Interrupt_Disabled ((unsigned int) 0x00000000)
+#define UART_U0IER_THRE_Interrupt_MASK ((unsigned int) 0x00000002) // Enables the THRE interrupt
+#define UART_U0IER_THRE_Interrupt_Enabled ((unsigned int) 0x00000002)
+#define UART_U0IER_THRE_Interrupt_Disabled ((unsigned int) 0x00000000)
+#define UART_U0IER_RLS_Interrupt_MASK ((unsigned int) 0x00000004) // Enables the Rx line status interrupt
+#define UART_U0IER_RLS_Interrupt_Enabled ((unsigned int) 0x00000004)
+#define UART_U0IER_RLS_Interrupt_Disabled ((unsigned int) 0x00000000)
+#define UART_U0IER_ABEOIntEn_MASK ((unsigned int) 0x00000100) // End of auto-baud interrupt
+#define UART_U0IER_ABEOIntEn_Enabled ((unsigned int) 0x00000100)
+#define UART_U0IER_ABEOIntEn_Disabled ((unsigned int) 0x00000000)
+#define UART_U0IER_ABTOIntEn_MASK ((unsigned int) 0x00000200) // Auto-baud timeout interrupt
+#define UART_U0IER_ABTOIntEn_Enabled ((unsigned int) 0x00000200)
+#define UART_U0IER_ABTOIntEn_Disabled ((unsigned int) 0x00000000)
+
+#define UART_U0IIR_IntStatus_MASK ((unsigned int) 0x00000001) // Interrupt status
+#define UART_U0IIR_IntStatus_InterruptPending ((unsigned int) 0x00000001)
+#define UART_U0IIR_IntStatus_NoInterruptPending ((unsigned int) 0x00000000)
+#define UART_U0IIR_IntId_MASK ((unsigned int) 0x0000000E) // Interrupt identification
+#define UART_U0IIR_IntId_RLS ((unsigned int) 0x00000006) // Receive line status
+#define UART_U0IIR_IntId_RDA ((unsigned int) 0x00000004) // Receive data available
+#define UART_U0IIR_IntId_CTI ((unsigned int) 0x0000000C) // Character time-out indicator
+#define UART_U0IIR_IntId_THRE ((unsigned int) 0x00000002) // THRE interrupt
+#define UART_U0IIR_IntId_MODEM ((unsigned int) 0x00000000) // Modem interrupt
+#define UART_U0IIR_FIFO_Enable_MASK ((unsigned int) 0x000000C0)
+#define UART_U0IIR_ABEOInt_MASK ((unsigned int) 0x00000100) // End of auto-baud interrupt
+#define UART_U0IIR_ABEOInt ((unsigned int) 0x00000100)
+#define UART_U0IIR_ABTOInt_MASK ((unsigned int) 0x00000200) // Auto-baud time-out interrupt
+#define UART_U0IIR_ABTOInt ((unsigned int) 0x00000200)
+
+#define UART_U0FCR_FIFO_Enable_MASK ((unsigned int) 0x00000001) // UART FIFOs enabled/disabled
+#define UART_U0FCR_FIFO_Enabled ((unsigned int) 0x00000001)
+#define UART_U0FCR_FIFO_Disabled ((unsigned int) 0x00000000)
+#define UART_U0FCR_Rx_FIFO_Reset_MASK ((unsigned int) 0x00000002)
+#define UART_U0FCR_Rx_FIFO_Reset ((unsigned int) 0x00000002) // Clear Rx FIFO
+#define UART_U0FCR_Tx_FIFO_Reset_MASK ((unsigned int) 0x00000004)
+#define UART_U0FCR_Tx_FIFO_Reset ((unsigned int) 0x00000004) // Clear Tx FIFO
+#define UART_U0FCR_Rx_Trigger_Level_Select_MASK ((unsigned int) 0x000000C0) // Chars written before before interrupt
+#define UART_U0FCR_Rx_Trigger_Level_Select_1Char ((unsigned int) 0x00000000)
+#define UART_U0FCR_Rx_Trigger_Level_Select_4Char ((unsigned int) 0x00000040)
+#define UART_U0FCR_Rx_Trigger_Level_Select_8Char ((unsigned int) 0x00000080)
+#define UART_U0FCR_Rx_Trigger_Level_Select_12Char ((unsigned int) 0x000000C0)
+
+#define UART_U0MCR_DTR_Control_MASK ((unsigned int) 0x00000001) // Source for modem output pin DTR
+#define UART_U0MCR_DTR_Control ((unsigned int) 0x00000001)
+#define UART_U0MCR_RTS_Control_MASK ((unsigned int) 0x00000002) // Source for modem output pin RTS
+#define UART_U0MCR_RTS_Control ((unsigned int) 0x00000002)
+#define UART_U0MCR_Loopback_Mode_Select_MASK ((unsigned int) 0x00000010) // Diagnostic loopback mode
+#define UART_U0MCR_Loopback_Mode_Select_Enabled ((unsigned int) 0x00000010)
+#define UART_U0MCR_Loopback_Mode_Select_Disabled ((unsigned int) 0x00000000)
+#define UART_U0MCR_RTSen_MASK ((unsigned int) 0x00000040) // Disable auto-rts flow control
+#define UART_U0MCR_RTSen_Enabled ((unsigned int) 0x00000040)
+#define UART_U0MCR_RTSen_Disabled ((unsigned int) 0x00000000)
+#define UART_U0MCR_CTSen_MASK ((unsigned int) 0x00000080) // Disable auto-cts flow control
+#define UART_U0MCR_CTSen_Enabled ((unsigned int) 0x00000080)
+#define UART_U0MCR_CTSen_Disabled ((unsigned int) 0x00000000)
+
+#define UART_U0LCR_Word_Length_Select_MASK ((unsigned int) 0x00000003) // Word Length Selector
+#define UART_U0LCR_Word_Length_Select_5Chars ((unsigned int) 0x00000000)
+#define UART_U0LCR_Word_Length_Select_6Chars ((unsigned int) 0x00000001)
+#define UART_U0LCR_Word_Length_Select_7Chars ((unsigned int) 0x00000002)
+#define UART_U0LCR_Word_Length_Select_8Chars ((unsigned int) 0x00000003)
+#define UART_U0LCR_Stop_Bit_Select_MASK ((unsigned int) 0x00000004) // Stop bit select
+#define UART_U0LCR_Stop_Bit_Select_1Bits ((unsigned int) 0x00000000)
+#define UART_U0LCR_Stop_Bit_Select_2Bits ((unsigned int) 0x00000004)
+#define UART_U0LCR_Parity_Enable_MASK ((unsigned int) 0x00000008) // Parity enable
+#define UART_U0LCR_Parity_Enabled ((unsigned int) 0x00000008)
+#define UART_U0LCR_Parity_Disabled ((unsigned int) 0x00000000)
+#define UART_U0LCR_Parity_Select_MASK ((unsigned int) 0x00000030) // Parity select
+#define UART_U0LCR_Parity_Select_OddParity ((unsigned int) 0x00000000)
+#define UART_U0LCR_Parity_Select_EvenParity ((unsigned int) 0x00000010)
+#define UART_U0LCR_Parity_Select_Forced1 ((unsigned int) 0x00000020)
+#define UART_U0LCR_Parity_Select_Forced0 ((unsigned int) 0x00000030)
+#define UART_U0LCR_Break_Control_MASK ((unsigned int) 0x00000040) // Break transmission control
+#define UART_U0LCR_Break_Control_Enabled ((unsigned int) 0x00000040)
+#define UART_U0LCR_Break_Control_Disabled ((unsigned int) 0x00000000)
+#define UART_U0LCR_Divisor_Latch_Access_MASK ((unsigned int) 0x00000080) // Divisor latch access
+#define UART_U0LCR_Divisor_Latch_Access_Enabled ((unsigned int) 0x00000080)
+#define UART_U0LCR_Divisor_Latch_Access_Disabled ((unsigned int) 0x00000000)
+
+#define UART_U0LSR_RDR_MASK ((unsigned int) 0x00000001) // Receiver data ready
+#define UART_U0LSR_RDR_EMPTY ((unsigned int) 0x00000000) // U0RBR is empty
+#define UART_U0LSR_RDR_DATA ((unsigned int) 0x00000001) // U0RBR contains valid data
+#define UART_U0LSR_OE_MASK ((unsigned int) 0x00000002) // Overrun error
+#define UART_U0LSR_OE ((unsigned int) 0x00000002)
+#define UART_U0LSR_PE_MASK ((unsigned int) 0x00000004) // Parity error
+#define UART_U0LSR_PE ((unsigned int) 0x00000004)
+#define UART_U0LSR_FE_MASK ((unsigned int) 0x00000008) // Framing error
+#define UART_U0LSR_FE ((unsigned int) 0x00000008)
+#define UART_U0LSR_BI_MASK ((unsigned int) 0x00000010) // Break interrupt
+#define UART_U0LSR_BI ((unsigned int) 0x00000010)
+#define UART_U0LSR_THRE_MASK ((unsigned int) 0x00000020) // Transmitter holding register empty
+#define UART_U0LSR_THRE ((unsigned int) 0x00000020)
+#define UART_U0LSR_TEMT_MASK ((unsigned int) 0x00000040) // Transmitter empty
+#define UART_U0LSR_TEMT ((unsigned int) 0x00000040)
+#define UART_U0LSR_RXFE_MASK ((unsigned int) 0x00000080) // Error in Rx FIFO
+#define UART_U0LSR_RXFE ((unsigned int) 0x00000080)
+
+#define UART_U0MSR_Delta_CTS_MASK ((unsigned int) 0x00000001) // State change of input CTS
+#define UART_U0MSR_Delta_CTS ((unsigned int) 0x00000001)
+#define UART_U0MSR_Delta_DSR_MASK ((unsigned int) 0x00000002) // State change of input DSR
+#define UART_U0MSR_Delta_DSR ((unsigned int) 0x00000002)
+#define UART_U0MSR_Trailing_Edge_RI_MASK ((unsigned int) 0x00000004) // Low to high transition of input RI
+#define UART_U0MSR_Trailing_Edge_RI ((unsigned int) 0x00000004)
+#define UART_U0MSR_Delta_DCD_MASK ((unsigned int) 0x00000008) // State change of input DCD
+#define UART_U0MSR_Delta_DCD ((unsigned int) 0x00000008)
+#define UART_U0MSR_CTS_MASK ((unsigned int) 0x00000010) // Clear to send state
+#define UART_U0MSR_CTS ((unsigned int) 0x00000010)
+#define UART_U0MSR_DSR_MASK ((unsigned int) 0x00000020) // Data set ready state
+#define UART_U0MSR_DSR ((unsigned int) 0x00000020)
+#define UART_U0MSR_RI_MASK ((unsigned int) 0x00000040) // Ring indicator state
+#define UART_U0MSR_RI ((unsigned int) 0x00000040)
+#define UART_U0MSR_DCD_MASK ((unsigned int) 0x00000080) // Data carrier detect state
+#define UART_U0MSR_DCD ((unsigned int) 0x00000080)
+
+#define UART_U0ACR_Start_MASK ((unsigned int) 0x00000001) // Auto-baud start/stop
+#define UART_U0ACR_Start ((unsigned int) 0x00000001)
+#define UART_U0ACR_Stop ((unsigned int) 0x00000000)
+#define UART_U0ACR_Mode_MASK ((unsigned int) 0x00000002) // Auto-baud mode select
+#define UART_U0ACR_Mode_Mode1 ((unsigned int) 0x00000000)
+#define UART_U0ACR_Mode_Mode2 ((unsigned int) 0x00000002)
+#define UART_U0ACR_AutoRestart_MASK ((unsigned int) 0x00000004)
+#define UART_U0ACR_AutoRestart_NoRestart ((unsigned int) 0x00000000)
+#define UART_U0ACR_AutoRestart_Restart ((unsigned int) 0x00000004) // Restart in case of time-out
+#define UART_U0ACR_ABEOIntClr_MASK ((unsigned int) 0x00000100) // End of auto-baud interrupt clear bit
+#define UART_U0ACR_ABEOIntClr ((unsigned int) 0x00000100)
+#define UART_U0ACR_ABTOIntClr_MASK ((unsigned int) 0x00000200) // Auto-baud timeout interrupt clear bit
+#define UART_U0ACR_ABTOIntClr ((unsigned int) 0x00000200)
+
+#define UART_U0FDR_DIVADDVAL_MASK ((unsigned int) 0x0000000F) // Fractional divider: prescaler register
+#define UART_U0FDR_MULVAL_MASK ((unsigned int) 0x000000F0) // Fractional divider: prescaler multiplier
+
+#define UART_U0TER_TXEN_MASK ((unsigned int) 0x00000080) // UART transmit enable
+#define UART_U0TER_TXEN_Enabled ((unsigned int) 0x00000080)
+#define UART_U0TER_TXEN_Disabled ((unsigned int) 0x00000000)
+
+#define UART_U0RS485CTRL_NMMEN_MASK ((unsigned int) 0x00000001) // Normal multi-drop mode
+#define UART_U0RS485CTRL_NMMEN ((unsigned int) 0x00000001)
+#define UART_U0RS485CTRL_RXDIS_MASK ((unsigned int) 0x00000002) // Receiver
+#define UART_U0RS485CTRL_RXDIS ((unsigned int) 0x00000002)
+#define UART_U0RS485CTRL_AADEN_MASK ((unsigned int) 0x00000004) // Auto-address detect
+#define UART_U0RS485CTRL_AADEN ((unsigned int) 0x00000004)
+#define UART_U0RS485CTRL_SEL_MASK ((unsigned int) 0x00000008)
+#define UART_U0RS485CTRL_SEL_RTS ((unsigned int) 0x00000000) // Use RTS for direction control
+#define UART_U0RS485CTRL_SEL_DTS ((unsigned int) 0x00000008) // Use DTS for direction control
+#define UART_U0RS485CTRL_DCTRL_MASK ((unsigned int) 0x00000010) // Enable/Disable auto-direction control
+#define UART_U0RS485CTRL_DCTRL_Disabled ((unsigned int) 0x00000000)
+#define UART_U0RS485CTRL_DCTRL_Enabled ((unsigned int) 0x00000010)
+#define UART_U0RS485CTRL_OINV_MASK ((unsigned int) 0x00000020) // Reverse polarity of direction control signal on RTS/DTR pin
+#define UART_U0RS485CTRL_OINV_Normal ((unsigned int) 0x00000000)
+#define UART_U0RS485CTRL_OINV_Inverted ((unsigned int) 0x00000020)
+
+#define UART_U0FIFOLVL_RXFIFOLVL_MASK ((unsigned int) 0x0000000F)
+#define UART_U0FIFOLVL_RXFIFOLVL_Empty ((unsigned int) 0x00000000)
+#define UART_U0FIFOLVL_RXFIFOLVL_Full ((unsigned int) 0x0000000F)
+#define UART_U0FIFOLVL_TXFIFOLVL_MASK ((unsigned int) 0x00000F00)
+#define UART_U0FIFOLVL_TXFIFOLVL_Empty ((unsigned int) 0x00000000)
+#define UART_U0FIFOLVL_TXFIFOLVL_Full ((unsigned int) 0x00000F00)
+
+/*##############################################################################
+## SSP - Synchronous Serial Port
+##############################################################################*/
+
+#define SSP_SSP0_BASE_ADDRESS (0x40040000)
+
+#define SSP_SSP0CR0 (*(pREG32 (0x40040000))) // Control register 0
+#define SSP_SSP0CR1 (*(pREG32 (0x40040004))) // Control register 1
+#define SSP_SSP0DR (*(pREG32 (0x40040008))) // Data register
+#define SSP_SSP0SR (*(pREG32 (0x4004000C))) // Status register
+#define SSP_SSP0CPSR (*(pREG32 (0x40040010))) // Clock prescale register
+#define SSP_SSP0IMSC (*(pREG32 (0x40040014))) // Interrupt mask set/clear register
+#define SSP_SSP0RIS (*(pREG32 (0x40040018))) // Raw interrupt status register
+#define SSP_SSP0MIS (*(pREG32 (0x4004001C))) // Masked interrupt status register
+#define SSP_SSP0ICR (*(pREG32 (0x40040020))) // SSPICR interrupt clear register
+
+/* SSP0CR0 (SSP0 Control Register 0)
+ This register controls the basic operation of the SSP controller. */
+
+#define SSP_SSP0CR0_DSS_MASK ((unsigned int) 0x0000000F) // Data size select
+#define SSP_SSP0CR0_DSS_4BIT ((unsigned int) 0x00000003)
+#define SSP_SSP0CR0_DSS_5BIT ((unsigned int) 0x00000004)
+#define SSP_SSP0CR0_DSS_6BIT ((unsigned int) 0x00000005)
+#define SSP_SSP0CR0_DSS_7BIT ((unsigned int) 0x00000006)
+#define SSP_SSP0CR0_DSS_8BIT ((unsigned int) 0x00000007)
+#define SSP_SSP0CR0_DSS_9BIT ((unsigned int) 0x00000008)
+#define SSP_SSP0CR0_DSS_10BIT ((unsigned int) 0x00000009)
+#define SSP_SSP0CR0_DSS_11BIT ((unsigned int) 0x0000000A)
+#define SSP_SSP0CR0_DSS_12BIT ((unsigned int) 0x0000000B)
+#define SSP_SSP0CR0_DSS_13BIT ((unsigned int) 0x0000000C)
+#define SSP_SSP0CR0_DSS_14BIT ((unsigned int) 0x0000000D)
+#define SSP_SSP0CR0_DSS_15BIT ((unsigned int) 0x0000000E)
+#define SSP_SSP0CR0_DSS_16BIT ((unsigned int) 0x0000000F)
+#define SSP_SSP0CR0_FRF_MASK ((unsigned int) 0x00000030) // Frame format
+#define SSP_SSP0CR0_FRF_SPI ((unsigned int) 0x00000000)
+#define SSP_SSP0CR0_FRF_TI ((unsigned int) 0x00000010)
+#define SSP_SSP0CR0_FRF_MWIRE ((unsigned int) 0x00000020)
+#define SSP_SSP0CR0_CPOL_MASK ((unsigned int) 0x00000040) // Clock out polarity
+#define SSP_SSP0CR0_CPOL_LOW ((unsigned int) 0x00000000)
+#define SSP_SSP0CR0_CPOL_HIGH ((unsigned int) 0x00000040)
+#define SSP_SSP0CR0_CPHA_MASK ((unsigned int) 0x00000080) // Clock out phase
+#define SSP_SSP0CR0_CPHA_FIRST ((unsigned int) 0x00000000)
+#define SSP_SSP0CR0_CPHA_SECOND ((unsigned int) 0x00000080)
+
+/* Serial Clock Rate. The number of prescaler-output clocks per
+ bit on the bus, minus one. Given that CPSDVSR is the
+ prescale divider, and the APB clock PCLK clocks the
+ prescaler, the bit frequency is PCLK / (CPSDVSR \97 [SCR+1]). */
+
+#define SSP_SSP0CR0_SCR_MASK ((unsigned int) 0x0000FF00) // Serial clock rate
+#define SSP_SSP0CR0_SCR_1 ((unsigned int) 0x00000100)
+#define SSP_SSP0CR0_SCR_2 ((unsigned int) 0x00000200)
+#define SSP_SSP0CR0_SCR_3 ((unsigned int) 0x00000300)
+#define SSP_SSP0CR0_SCR_4 ((unsigned int) 0x00000400)
+#define SSP_SSP0CR0_SCR_5 ((unsigned int) 0x00000500)
+#define SSP_SSP0CR0_SCR_6 ((unsigned int) 0x00000600)
+#define SSP_SSP0CR0_SCR_7 ((unsigned int) 0x00000700)
+#define SSP_SSP0CR0_SCR_8 ((unsigned int) 0x00000800)
+#define SSP_SSP0CR0_SCR_9 ((unsigned int) 0x00000900)
+#define SSP_SSP0CR0_SCR_10 ((unsigned int) 0x00000A00)
+#define SSP_SSP0CR0_SCR_11 ((unsigned int) 0x00000B00)
+#define SSP_SSP0CR0_SCR_12 ((unsigned int) 0x00000C00)
+#define SSP_SSP0CR0_SCR_13 ((unsigned int) 0x00000D00)
+#define SSP_SSP0CR0_SCR_14 ((unsigned int) 0x00000E00)
+#define SSP_SSP0CR0_SCR_15 ((unsigned int) 0x00000F00)
+#define SSP_SSP0CR0_SCR_16 ((unsigned int) 0x00001000)
+
+/* SSP0CR1 (SSP0 Control Register 1)
+ This register controls certain aspects of the operation of the SSP controller. */
+
+#define SSP_SSP0CR1_LBM_MASK ((unsigned int) 0x00000001) // Loop back mode
+#define SSP_SSP0CR1_LBM_NORMAL ((unsigned int) 0x00000000)
+#define SSP_SSP0CR1_LBM_INVERTED ((unsigned int) 0x00000001) // MISO/MOSI are reversed
+#define SSP_SSP0CR1_SSE_MASK ((unsigned int) 0x00000002) // SSP enable
+#define SSP_SSP0CR1_SSE_DISABLED ((unsigned int) 0x00000000)
+#define SSP_SSP0CR1_SSE_ENABLED ((unsigned int) 0x00000002)
+#define SSP_SSP0CR1_MS_MASK ((unsigned int) 0x00000004) // Master/Slave Mode
+#define SSP_SSP0CR1_MS_MASTER ((unsigned int) 0x00000000)
+#define SSP_SSP0CR1_MS_SLAVE ((unsigned int) 0x00000004)
+#define SSP_SSP0CR1_SOD_MASK ((unsigned int) 0x00000008) // Slave output disable
+
+/* SSP0DR (SSP0 Data Register)
+ Software can write data to be transmitted to this register, and read data that has been
+ received. */
+
+#define SSP_SSP0DR_MASK ((unsigned int) 0x0000FFFF) // Data
+
+/* SSP0SR (SSP0 Status Register)
+ This read-only register reflects the current status of the SSP controller. */
+
+#define SSP_SSP0SR_TFE_MASK ((unsigned int) 0x00000001) // Transmit FIFO empty
+#define SSP_SSP0SR_TFE_EMPTY ((unsigned int) 0x00000001)
+#define SSP_SSP0SR_TFE_NOTEMPTY ((unsigned int) 0x00000000)
+#define SSP_SSP0SR_TNF_MASK ((unsigned int) 0x00000002) // Transmit FIFO not full
+#define SSP_SSP0SR_TNF_NOTFULL ((unsigned int) 0x00000002)
+#define SSP_SSP0SR_TNF_FULL ((unsigned int) 0x00000000)
+#define SSP_SSP0SR_RNE_MASK ((unsigned int) 0x00000004) // Receive FIFO not empty
+#define SSP_SSP0SR_RNE_NOTEMPTY ((unsigned int) 0x00000004)
+#define SSP_SSP0SR_RNE_EMPTY ((unsigned int) 0x00000000)
+#define SSP_SSP0SR_RFF_MASK ((unsigned int) 0x00000008) // Receive FIFO full
+#define SSP_SSP0SR_RFF_FULL ((unsigned int) 0x00000008)
+#define SSP_SSP0SR_RFF_NOTFULL ((unsigned int) 0x00000000)
+#define SSP_SSP0SR_BSY_MASK ((unsigned int) 0x00000010) // Busy Flag
+#define SSP_SSP0SR_BSY_IDLE ((unsigned int) 0x00000000)
+#define SSP_SSP0SR_BSY_BUSY ((unsigned int) 0x00000010)
+
+/* SSP0CPSR (SSP0 Clock Prescale Register)
+ This register controls the factor by which the Prescaler divides the SSP peripheral clock
+ SSP_PCLK to yield the prescaler clock that is, in turn, divided by the SCR factor in
+ SSP0CR0, to determine the bit clock. */
+
+#define SSP_SSP0CPSR_CPSDVSR_MASK ((unsigned int) 0x000000FF)
+#define SSP_SSP0CPSR_CPSDVSR_DIV2 ((unsigned int) 0x00000002)
+#define SSP_SSP0CPSR_CPSDVSR_DIV4 ((unsigned int) 0x00000004)
+#define SSP_SSP0CPSR_CPSDVSR_DIV10 ((unsigned int) 0x0000000A)
+#define SSP_SSP0CPSR_CPSDVSR_DIV12 ((unsigned int) 0x0000000C)
+#define SSP_SSP0CPSR_CPSDVSR_DIV16 ((unsigned int) 0x00000010)
+#define SSP_SSP0CPSR_CPSDVSR_DIV20 ((unsigned int) 0x00000014)
+
+/* SSP0IMSC (SSP0 Interrupt Mask Set/Clear Register)
+ This register controls whether each of the four possible interrupt conditions in the SSP
+ controller are enabled. Note that ARM uses the word \93masked\94 in the opposite sense from
+ classic computer terminology, in which \93masked\94 meant \93disabled\94. ARM uses the word
+ \93masked\94 to mean \93enabled\94. To avoid confusion we will not use the word \93masked\94. */
+
+#define SSP_SSP0IMSC_RORIM_MASK ((unsigned int) 0x00000001) // Receive overrun interrupt
+#define SSP_SSP0IMSC_RORIM_ENBL ((unsigned int) 0x00000001)
+#define SSP_SSP0IMSC_RORIM_DSBL ((unsigned int) 0x00000000)
+#define SSP_SSP0IMSC_RTIM_MASK ((unsigned int) 0x00000002) // Receive timeout interrupt
+#define SSP_SSP0IMSC_RTIM_ENBL ((unsigned int) 0x00000002)
+#define SSP_SSP0IMSC_RTIM_DSBL ((unsigned int) 0x00000000)
+#define SSP_SSP0IMSC_RXIM_MASK ((unsigned int) 0x00000004) // Rx FIFO >= 1/2 full interrupt
+#define SSP_SSP0IMSC_RXIM_ENBL ((unsigned int) 0x00000004)
+#define SSP_SSP0IMSC_RXIM_DSBL ((unsigned int) 0x00000000)
+#define SSP_SSP0IMSC_TXIM_MASK ((unsigned int) 0x00000008) // Tx FIFO >= 1/2 empty interrupt
+#define SSP_SSP0IMSC_TXIM_ENBL ((unsigned int) 0x00000008)
+#define SSP_SSP0IMSC_TXIM_DSBL ((unsigned int) 0x00000000)
+
+/* SSP0RIS (SSP0 Raw Interrupt Status Register)
+ This read-only register contains a 1 for each interrupt condition that is asserted,
+ regardless of whether or not the interrupt is enabled in the SSP0IMSC. */
+
+#define SSP_SSP0RIS_RORRIS_MASK ((unsigned int) 0x00000001) // Frame received while Rx FIFO full
+#define SSP_SSP0RIS_RORRIS_RCVD ((unsigned int) 0x00000001)
+#define SSP_SSP0RIS_RTRIS_MASK ((unsigned int) 0x00000002) // Rx FIFO not empty no read within timeout
+#define SSP_SSP0RIS_RTRIS_NOTEMPTY ((unsigned int) 0x00000002)
+#define SSP_SSP0RIS_RXRIS_MASK ((unsigned int) 0x00000004) // Rx FIFO >= half full
+#define SSP_SSP0RIS_RXRIS_HALFFULL ((unsigned int) 0x00000004)
+#define SSP_SSP0RIS_TXRIS_MASK ((unsigned int) 0x00000008) // Tx FIF0 >= half-empty
+#define SSP_SSP0RIS_TXRIS_HALFEMPTY ((unsigned int) 0x00000008)
+
+/* SSP0MIS (SSP0 Masked Interrupt Status Register)
+ This read-only register contains a 1 for each interrupt condition that is asserted and
+ enabled in the SSP0IMSC. When an SSP interrupt occurs, the interrupt service routine
+ should read this register to determine the cause(s) of the interrupt. */
+
+#define SSP_SSP0MIS_RORMIS_MASK ((unsigned int) 0x00000001) // Frame received while Rx FIFO full
+#define SSP_SSP0MIS_RORMIS_FRMRCVD ((unsigned int) 0x00000001)
+#define SSP_SSP0MIS_RTMIS_MASK ((unsigned int) 0x00000002) // Rx FIFO not empty no read withing timeout
+#define SSP_SSP0MIS_RTMIS_NOTEMPTY ((unsigned int) 0x00000002)
+#define SSP_SSP0MIS_RXMIS_MASK ((unsigned int) 0x00000004) // Rx FIFO >= half full
+#define SSP_SSP0MIS_RXMIS_HALFFULL ((unsigned int) 0x00000004)
+#define SSP_SSP0MIS_TXMIS_MASK ((unsigned int) 0x00000008) // Tx FIFO >= half-empty
+#define SSP_SSP0MIS_TXMIS_HALFEMPTY ((unsigned int) 0x00000008)
+
+/* SSP0ICR (SSP0 Interrupt Clear Register)
+ Software can write one or more one(s) to this write-only register, to clear the
+ corresponding interrupt condition(s) in the SSP controller. Note that the other two interrupt
+ conditions can be cleared by writing or reading the appropriate FIFO, or disabled by
+ clearing the corresponding bit in SSP0IMSC. */
+
+#define SSP_SSP0ICR_RORIC_MASK ((unsigned int) 0x00000001) // Clears RORIC interrupt flag
+#define SSP_SSP0ICR_RORIC_CLEAR ((unsigned int) 0x00000001)
+#define SSP_SSP0ICR_RTIC_MASK ((unsigned int) 0x00000002) // Clear Rx FIFO not empty/no read flag
+#define SSP_SSP0ICR_RTIC_CLEAR ((unsigned int) 0x00000002)
+
+/*##############################################################################
+## I2C
+##############################################################################*/
+
+#define I2C_BASE_ADDRESS (0x40000000)
+
+#define I2C_I2CCONSET (*(pREG32 (0x40000000))) // I2C control set register
+#define I2C_I2CSTAT (*(pREG32 (0x40000004))) // I2C status register
+#define I2C_I2CDAT (*(pREG32 (0x40000008))) // I2C data register
+#define I2C_I2CADR0 (*(pREG32 (0x4000000C))) // I2C slave address register
+#define I2C_I2CSCLH (*(pREG32 (0x40000010))) // I2C SCL HIGH/LOW duty cycle register
+#define I2C_I2CSCLL (*(pREG32 (0x40000014)))
+#define I2C_I2CCONCLR (*(pREG32 (0x40000018))) // I2C control clear register
+#define I2C_I2CMMCTRL (*(pREG32 (0x4000001C))) // I2C monitor control register
+#define I2C_I2CADR1 (*(pREG32 (0x40000020))) // I2C slave address register 1
+#define I2C_I2CADR2 (*(pREG32 (0x40000024))) // I2C slave address register 2
+#define I2C_I2CADR3 (*(pREG32 (0x40000028))) // I2C slave address register 3
+#define I2C_I2CDATA_BUFFER (*(pREG32 (0x4000002C))) // I2C data buffer register
+#define I2C_I2CMASK0 (*(pREG32 (0x40000030))) // I2C mask register 0
+#define I2C_I2CMASK1 (*(pREG32 (0x40000034))) // I2C mask register 1
+#define I2C_I2CMASK2 (*(pREG32 (0x40000038))) // I2C mask register 2
+#define I2C_I2CMASK3 (*(pREG32 (0x4000003C))) // I2C mask register 3
+
+/* I2CCONSET (I2C Control Set register)
+ The I2CONSET registers control setting of bits in the I2CON register that controls
+ operation of the I2C interface. Writing a one to a bit of this register causes the
+ corresponding bit in the I2C control register to be set. Writing a zero has no effect. */
+
+#define I2C_I2CCONSET_AA_MASK ((unsigned int) 0x00000004)
+#define I2C_I2CCONSET_AA ((unsigned int) 0x00000004) // Asset acknowlegde flag
+#define I2C_I2CCONSET_SI_MASK ((unsigned int) 0x00000008)
+#define I2C_I2CCONSET_SI ((unsigned int) 0x00000008) // I2C interrupt flag
+#define I2C_I2CCONSET_STO_MASK ((unsigned int) 0x00000010)
+#define I2C_I2CCONSET_STO ((unsigned int) 0x00000010) // Stop flag
+#define I2C_I2CCONSET_STA_MASK ((unsigned int) 0x00000020)
+#define I2C_I2CCONSET_STA ((unsigned int) 0x00000020) // Start flag
+#define I2C_I2CCONSET_I2EN_MASK ((unsigned int) 0x00000040)
+#define I2C_I2CCONSET_I2EN ((unsigned int) 0x00000040) // I2C interface enable
+
+/* I2CSTAT (I2C Status register)
+ Each I2C Status register reflects the condition of the corresponding I2C interface. The I2C
+ Status register is Read-Only. */
+
+#define I2C_I2CSTAT_Status_MASK ((unsigned int) 0x000000F8) // Status information
+
+/* I2CADR0 (I2C Slave Address register)
+ These registers are readable and writable and are only used when an I2C interface is set
+ to slave mode. */
+
+#define I2C_I2CADR0_GC_MASK ((unsigned int) 0x00000001)
+#define I2C_I2CADR0_GC ((unsigned int) 0x00000001) // General call enable bit
+#define I2C_I2CADR0_Address_MASK ((unsigned int) 0x000000FE) // I2C device address for slave mode
+
+/* I2CCONCLR (I2C Control Clear register)
+ The I2CONCLR registers control clearing of bits in the I2CON register that controls
+ operation of the I2C interface. Writing a one to a bit of this register causes the
+ corresponding bit in the I2C control register to be cleared. Writing a zero has no effect. */
+
+#define I2C_I2CCONCLR_AAC_MASK ((unsigned int) 0x00000004) // Assert acknowledge clear bit
+#define I2C_I2CCONCLR_AAC ((unsigned int) 0x00000004)
+#define I2C_I2CCONCLR_SIC_MASK ((unsigned int) 0x00000008) // I2C interrupt clear bit
+#define I2C_I2CCONCLR_SIC ((unsigned int) 0x00000008)
+#define I2C_I2CCONCLR_STAC_MASK ((unsigned int) 0x00000020) // Start flag clear bit
+#define I2C_I2CCONCLR_STAC ((unsigned int) 0x00000020)
+#define I2C_I2CCONCLR_I2ENC_MASK ((unsigned int) 0x00000040) // I2C interface disable bit
+#define I2C_I2CCONCLR_I2ENC ((unsigned int) 0x00000040)
+
+/* I2CMMCTRL (I2C Monitor mode control register)
+ This register controls the Monitor mode which allows the I2C module to monitor traffic on
+ the I2C bus without actually participating in traffic or interfering with the I2C bus. */
+
+#define I2C_I2CMMCTRL_MM_ENA_MASK ((unsigned int) 0x00000001) // Monitor mode enable
+#define I2C_I2CMMCTRL_MM_ENA_ENABLED ((unsigned int) 0x00000001)
+#define I2C_I2CMMCTRL_MM_ENA_DISABLED ((unsigned int) 0x00000000)
+#define I2C_I2CMMCTRL_ENA_SCL_MASK ((unsigned int) 0x00000002) // SCL output enable
+#define I2C_I2CMMCTRL_ENA_SCL_HOLDLOW ((unsigned int) 0x00000002)
+#define I2C_I2CMMCTRL_ENA_SCL_FORCEHIGH ((unsigned int) 0x00000000)
+#define I2C_I2CMMCTRL_MATCH_ALL_MASK ((unsigned int) 0x00000008) // Select interrupt register match
+#define I2C_I2CMMCTRL_MATCH_ALL_NORMAL ((unsigned int) 0x00000000)
+#define I2C_I2CMMCTRL_MATCH_ALL_ANYADDRESS ((unsigned int) 0x00000008)
+
+/* I2CADR1..3 (I2C Slave Address registers)
+ These registers are readable and writable and are only used when an I2C interface is set
+ to slave mode. In master mode, this register has no effect. The LSB of I2ADR is the
+ General Call bit. When this bit is set, the General Call address (0x00) is recognized. */
+
+#define I2C_I2CADR1_GC_MASK ((unsigned int) 0x00000001) // General call enable bit
+#define I2C_I2CADR1_GC ((unsigned int) 0x00000001)
+#define I2C_I2CADR1_Address_MASK ((unsigned int) 0x000000FE)
+
+#define I2C_I2CADR2_GC_MASK ((unsigned int) 0x00000001) // General call enable bit
+#define I2C_I2CADR2_GC ((unsigned int) 0x00000001)
+#define I2C_I2CADR2_Address_MASK ((unsigned int) 0x000000FE)
+
+#define I2C_I2CADR3_GC_MASK ((unsigned int) 0x00000001) // General call enable bit
+#define I2C_I2CADR3_GC ((unsigned int) 0x00000001)
+#define I2C_I2CADR3_Address_MASK ((unsigned int) 0x000000FE)
+
+/* I2CMASK0..3 (I2C Mask registers) */
+
+#define I2C_I2CMASK0_MASK_MASK ((unsigned int) 0x000000FE)
+
+#define I2C_I2CMASK1_MASK_MASK ((unsigned int) 0x000000FE)
+
+#define I2C_I2CMASK2_MASK_MASK ((unsigned int) 0x000000FE)
+
+#define I2C_I2CMASK3_MASK_MASK ((unsigned int) 0x000000FE)
+
+/*##############################################################################
+## 16-Bit Timers (CT16B0/1)
+##############################################################################*/
+
+#define TMR_CT16B0_BASE_ADDRESS (0x4000C000)
+
+#define TMR_TMR16B0IR (*(pREG32 (0x4000C000))) // Interrupt register
+#define TMR_TMR16B0TCR (*(pREG32 (0x4000C004))) // Timer control register
+#define TMR_TMR16B0TC (*(pREG32 (0x4000C008))) // Timer counter
+#define TMR_TMR16B0PR (*(pREG32 (0x4000C00C))) // Prescale register
+#define TMR_TMR16B0PC (*(pREG32 (0x4000C010))) // Prescale counter register
+#define TMR_TMR16B0MCR (*(pREG32 (0x4000C014))) // Match control register
+#define TMR_TMR16B0MR0 (*(pREG32 (0x4000C018))) // Match register 0
+#define TMR_TMR16B0MR1 (*(pREG32 (0x4000C01C))) // Match register 1
+#define TMR_TMR16B0MR2 (*(pREG32 (0x4000C020))) // Match register 2
+#define TMR_TMR16B0MR3 (*(pREG32 (0x4000C024))) // Match register 3
+#define TMR_TMR16B0CCR (*(pREG32 (0x4000C028))) // Capture control register
+#define TMR_TMR16B0CR0 (*(pREG32 (0x4000C02C))) // Capture register
+#define TMR_TMR16B0EMR (*(pREG32 (0x4000C03C))) // External match register
+#define TMR_TMR16B0CTCR (*(pREG32 (0x4000C070))) // Count control register
+#define TMR_TMR16B0PWMC (*(pREG32 (0x4000C074))) // PWM control register
+
+#define TMR_TMR16B0IR_MR0_MASK ((unsigned int) 0x00000001) // Interrupt flag for match channel 0
+#define TMR_TMR16B0IR_MR0 ((unsigned int) 0x00000001)
+#define TMR_TMR16B0IR_MR1_MASK ((unsigned int) 0x00000002) // Interrupt flag for match channel 1
+#define TMR_TMR16B0IR_MR1 ((unsigned int) 0x00000002)
+#define TMR_TMR16B0IR_MR2_MASK ((unsigned int) 0x00000004) // Interrupt flag for match channel 2
+#define TMR_TMR16B0IR_MR2 ((unsigned int) 0x00000004)
+#define TMR_TMR16B0IR_MR3_MASK ((unsigned int) 0x00000008) // Interrupt flag for match channel 3
+#define TMR_TMR16B0IR_MR3 ((unsigned int) 0x00000008)
+#define TMR_TMR16B0IR_CR0_MASK ((unsigned int) 0x00000010) // Interrupt flag for capture channel 0 event
+#define TMR_TMR16B0IR_CR0 ((unsigned int) 0x00000010)
+#define TMR_TMR16B0IR_MASK_ALL ((unsigned int) 0x0000001F)
+
+#define TMR_TMR16B0TCR_COUNTERENABLE_MASK ((unsigned int) 0x00000001) // Counter enable
+#define TMR_TMR16B0TCR_COUNTERENABLE_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR16B0TCR_COUNTERENABLE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0TCR_COUNTERRESET_MASK ((unsigned int) 0x00000002)
+#define TMR_TMR16B0TCR_COUNTERRESET_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR16B0TCR_COUNTERRESET_DISABLED ((unsigned int) 0x00000002)
+
+#define TMR_TMR16B0MCR_MR0_INT_MASK ((unsigned int) 0x00000001) // Interrupt on MRO
+#define TMR_TMR16B0MCR_MR0_INT_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR16B0MCR_MR0_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR0_RESET_MASK ((unsigned int) 0x00000002) // Reset on MR0
+#define TMR_TMR16B0MCR_MR0_RESET_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR16B0MCR_MR0_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR0_STOP_MASK ((unsigned int) 0x00000004) // Stop on MR0
+#define TMR_TMR16B0MCR_MR0_STOP_ENABLED ((unsigned int) 0x00000004)
+#define TMR_TMR16B0MCR_MR0_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR1_INT_MASK ((unsigned int) 0x00000008) // Interrupt on MR1
+#define TMR_TMR16B0MCR_MR1_INT_ENABLED ((unsigned int) 0x00000008)
+#define TMR_TMR16B0MCR_MR1_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR1_RESET_MASK ((unsigned int) 0x00000010) // Reset on MR1
+#define TMR_TMR16B0MCR_MR1_RESET_ENABLED ((unsigned int) 0x00000010)
+#define TMR_TMR16B0MCR_MR1_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR1_STOP_MASK ((unsigned int) 0x00000020) // Stop on MR1
+#define TMR_TMR16B0MCR_MR1_STOP_ENABLED ((unsigned int) 0x00000020)
+#define TMR_TMR16B0MCR_MR1_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR2_INT_MASK ((unsigned int) 0x00000040) // Interrupt on MR2
+#define TMR_TMR16B0MCR_MR2_INT_ENABLED ((unsigned int) 0x00000040)
+#define TMR_TMR16B0MCR_MR2_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR2_RESET_MASK ((unsigned int) 0x00000080) // Reset on MR2
+#define TMR_TMR16B0MCR_MR2_RESET_ENABLED ((unsigned int) 0x00000080)
+#define TMR_TMR16B0MCR_MR2_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR2_STOP_MASK ((unsigned int) 0x00000100) // Stop on MR2
+#define TMR_TMR16B0MCR_MR2_STOP_ENABLED ((unsigned int) 0x00000100)
+#define TMR_TMR16B0MCR_MR2_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR3_INT_MASK ((unsigned int) 0x00000200) // Interrupt on MR3
+#define TMR_TMR16B0MCR_MR3_INT_ENABLED ((unsigned int) 0x00000200)
+#define TMR_TMR16B0MCR_MR3_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR3_RESET_MASK ((unsigned int) 0x00000400) // Reset on MR3
+#define TMR_TMR16B0MCR_MR3_RESET_ENABLED ((unsigned int) 0x00000400)
+#define TMR_TMR16B0MCR_MR3_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0MCR_MR3_STOP_MASK ((unsigned int) 0x00000800) // Stop on MR3
+#define TMR_TMR16B0MCR_MR3_STOP_ENABLED ((unsigned int) 0x00000800)
+#define TMR_TMR16B0MCR_MR3_STOP_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_TMR16B0CCR_CAP0RE_MASK ((unsigned int) 0x00000001) // Capture on rising edge
+#define TMR_TMR16B0CCR_CAP0RE_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR16B0CCR_CAP0RE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0CCR_CAP0FE_MASK ((unsigned int) 0x00000002) // Capture on falling edge
+#define TMR_TMR16B0CCR_CAP0FE_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR16B0CCR_CAP0FE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0CCR_CAP0I_MASK ((unsigned int) 0x00000004) // Interrupt on CAP0 event
+#define TMR_TMR16B0CCR_CAP0I_ENABLED ((unsigned int) 0x00000004)
+#define TMR_TMR16B0CCR_CAP0I_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_TMR16B0EMR_EM0_MASK ((unsigned int) 0x00000001) // External match 0
+#define TMR_TMR16B0EMR_EM0 ((unsigned int) 0x00000001)
+#define TMR_TMR16B0EMR_EMC0_MASK ((unsigned int) 0x00000030)
+#define TMR_TMR16B0EMR_EMC0_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR16B0EMR_EMC0_LOW ((unsigned int) 0x00000010)
+#define TMR_TMR16B0EMR_EMC0_HIGH ((unsigned int) 0x00000020)
+#define TMR_TMR16B0EMR_EMC0_TOGGLE ((unsigned int) 0x00000030)
+#define TMR_TMR16B0EMR_EM1_MASK ((unsigned int) 0x00000002) // External match 1
+#define TMR_TMR16B0EMR_EM1 ((unsigned int) 0x00000002)
+#define TMR_TMR16B0EMR_EMC1_MASK ((unsigned int) 0x000000C0)
+#define TMR_TMR16B0EMR_EMC1_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR16B0EMR_EMC1_LOW ((unsigned int) 0x00000040)
+#define TMR_TMR16B0EMR_EMC1_HIGH ((unsigned int) 0x00000080)
+#define TMR_TMR16B0EMR_EMC1_TOGGLE ((unsigned int) 0x000000C0)
+#define TMR_TMR16B0EMR_EM2_MASK ((unsigned int) 0x00000004) // External match 2
+#define TMR_TMR16B0EMR_EM2 ((unsigned int) 0x00000004)
+#define TMR_TMR16B0EMR_EMC2_MASK ((unsigned int) 0x00000300)
+#define TMR_TMR16B0EMR_EMC2_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR16B0EMR_EMC2_LOW ((unsigned int) 0x00000100)
+#define TMR_TMR16B0EMR_EMC2_HIGH ((unsigned int) 0x00000200)
+#define TMR_TMR16B0EMR_EMC2_TOGGLE ((unsigned int) 0x00000300)
+#define TMR_TMR16B0EMR_EM3_MASK ((unsigned int) 0x00000008) // External match 3
+#define TMR_TMR16B0EMR_EM3 ((unsigned int) 0x00000008)
+#define TMR_TMR16B0EMR_EMC3_MASK ((unsigned int) 0x00000C00)
+#define TMR_TMR16B0EMR_EMC3_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR16B0EMR_EMC3_LOW ((unsigned int) 0x00000400)
+#define TMR_TMR16B0EMR_EMC3_HIGH ((unsigned int) 0x00000800)
+#define TMR_TMR16B0EMR_EMC3_TOGGLE ((unsigned int) 0x00000C00)
+
+#define TMR_TMR16B0CTCR_CTMODE_MASK ((unsigned int) 0x00000003) // Counter/Timer mode
+#define TMR_TMR16B0CTCR_CTMODE_TIMER ((unsigned int) 0x00000000) // Timer Mode: Every rising PCLK edge
+#define TMR_TMR16B0CTCR_CTMODE_COUNTERRISING ((unsigned int) 0x00000001) // Counter: TC increments on rising edge of input
+#define TMR_TMR16B0CTCR_CTMODE_COUNTERFALLING ((unsigned int) 0x00000002) // Counter: TC increments on falling edge of input
+#define TMR_TMR16B0CTCR_CTMODE_COUNTERBOTH ((unsigned int) 0x00000003) // Counter: TC increments on both edges of input
+#define TMR_TMR16B0CTCR_CINPUTSELECT_MASK ((unsigned int) 0x0000000C)
+#define TMR_TMR16B0CTCR_CINPUTSELECT ((unsigned int) 0x00000000) // CINPUTSELECT must be set to 00
+
+#define TMR_TMR16B0PWMC_PWM0_MASK ((unsigned int) 0x00000001)
+#define TMR_TMR16B0PWMC_PWM0_ENABLED ((unsigned int) 0x00000001) // PWM mode is enabled for CT16Bn_MAT0
+#define TMR_TMR16B0PWMC_PWM0_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0PWMC_PWM1_MASK ((unsigned int) 0x00000002)
+#define TMR_TMR16B0PWMC_PWM1_ENABLED ((unsigned int) 0x00000002) // PWM mode is enabled for CT16Bn_MAT1
+#define TMR_TMR16B0PWMC_PWM1_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0PWMC_PWM2_MASK ((unsigned int) 0x00000004)
+#define TMR_TMR16B0PWMC_PWM2_ENABLED ((unsigned int) 0x00000004) // PWM mode is enabled for CT16Bn_MAT2
+#define TMR_TMR16B0PWMC_PWM2_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B0PWMC_PWM3_MASK ((unsigned int) 0x00000008)
+#define TMR_TMR16B0PWMC_PWM3_ENABLED ((unsigned int) 0x00000008)
+#define TMR_TMR16B0PWMC_PWM3_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_CT16B1_BASE_ADDRESS (0x40010000)
+
+#define TMR_TMR16B1IR (*(pREG32 (0x40010000))) // Interrupt register
+#define TMR_TMR16B1TCR (*(pREG32 (0x40010004))) // Timer control register
+#define TMR_TMR16B1TC (*(pREG32 (0x40010008))) // Timer counter
+#define TMR_TMR16B1PR (*(pREG32 (0x4001000C))) // Prescale register
+#define TMR_TMR16B1PC (*(pREG32 (0x40010010))) // Prescale counter register
+#define TMR_TMR16B1MCR (*(pREG32 (0x40010014))) // Match control register
+#define TMR_TMR16B1MR0 (*(pREG32 (0x40010018))) // Match register 0
+#define TMR_TMR16B1MR1 (*(pREG32 (0x4001001C))) // Match register 1
+#define TMR_TMR16B1MR2 (*(pREG32 (0x40010020))) // Match register 2
+#define TMR_TMR16B1MR3 (*(pREG32 (0x40010024))) // Match register 3
+#define TMR_TMR16B1CCR (*(pREG32 (0x40010028))) // Capture control register
+#define TMR_TMR16B1CR0 (*(pREG32 (0x4001002C))) // Capture register
+#define TMR_TMR16B1EMR (*(pREG32 (0x4001003C))) // External match register
+#define TMR_TMR16B1CTCR (*(pREG32 (0x40010070))) // Count control register
+#define TMR_TMR16B1PWMC (*(pREG32 (0x40010074))) // PWM control register
+
+#define TMR_TMR16B1IR_MR0_MASK ((unsigned int) 0x00000001) // Interrupt flag for match channel 0
+#define TMR_TMR16B1IR_MR0 ((unsigned int) 0x00000001)
+#define TMR_TMR16B1IR_MR1_MASK ((unsigned int) 0x00000002) // Interrupt flag for match channel 1
+#define TMR_TMR16B1IR_MR1 ((unsigned int) 0x00000002)
+#define TMR_TMR16B1IR_MR2_MASK ((unsigned int) 0x00000004) // Interrupt flag for match channel 2
+#define TMR_TMR16B1IR_MR2 ((unsigned int) 0x00000004)
+#define TMR_TMR16B1IR_MR3_MASK ((unsigned int) 0x00000008) // Interrupt flag for match channel 3
+#define TMR_TMR16B1IR_MR3 ((unsigned int) 0x00000008)
+#define TMR_TMR16B1IR_CR0_MASK ((unsigned int) 0x00000010) // Interrupt flag for capture channel 0 event
+#define TMR_TMR16B1IR_CR0 ((unsigned int) 0x00000010)
+#define TMR_TMR16B1IR_MASK_ALL ((unsigned int) 0x0000001F)
+
+#define TMR_TMR16B1TCR_COUNTERENABLE_MASK ((unsigned int) 0x00000001) // Counter enable
+#define TMR_TMR16B1TCR_COUNTERENABLE_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR16B1TCR_COUNTERENABLE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1TCR_COUNTERRESET_MASK ((unsigned int) 0x00000002)
+#define TMR_TMR16B1TCR_COUNTERRESET_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR16B1TCR_COUNTERRESET_DISABLED ((unsigned int) 0x00000002)
+
+#define TMR_TMR16B1MCR_MR0_INT_MASK ((unsigned int) 0x00000001) // Interrupt on MRO
+#define TMR_TMR16B1MCR_MR0_INT_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR16B1MCR_MR0_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR0_RESET_MASK ((unsigned int) 0x00000002) // Reset on MR0
+#define TMR_TMR16B1MCR_MR0_RESET_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR16B1MCR_MR0_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR0_STOP_MASK ((unsigned int) 0x00000004) // Stop on MR0
+#define TMR_TMR16B1MCR_MR0_STOP_ENABLED ((unsigned int) 0x00000004)
+#define TMR_TMR16B1MCR_MR0_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR1_INT_MASK ((unsigned int) 0x00000008) // Interrupt on MR1
+#define TMR_TMR16B1MCR_MR1_INT_ENABLED ((unsigned int) 0x00000008)
+#define TMR_TMR16B1MCR_MR1_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR1_RESET_MASK ((unsigned int) 0x00000010) // Reset on MR1
+#define TMR_TMR16B1MCR_MR1_RESET_ENABLED ((unsigned int) 0x00000010)
+#define TMR_TMR16B1MCR_MR1_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR1_STOP_MASK ((unsigned int) 0x00000020) // Stop on MR1
+#define TMR_TMR16B1MCR_MR1_STOP_ENABLED ((unsigned int) 0x00000020)
+#define TMR_TMR16B1MCR_MR1_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR2_INT_MASK ((unsigned int) 0x00000040) // Interrupt on MR2
+#define TMR_TMR16B1MCR_MR2_INT_ENABLED ((unsigned int) 0x00000040)
+#define TMR_TMR16B1MCR_MR2_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR2_RESET_MASK ((unsigned int) 0x00000080) // Reset on MR2
+#define TMR_TMR16B1MCR_MR2_RESET_ENABLED ((unsigned int) 0x00000080)
+#define TMR_TMR16B1MCR_MR2_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR2_STOP_MASK ((unsigned int) 0x00000100) // Stop on MR2
+#define TMR_TMR16B1MCR_MR2_STOP_ENABLED ((unsigned int) 0x00000100)
+#define TMR_TMR16B1MCR_MR2_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR3_INT_MASK ((unsigned int) 0x00000200) // Interrupt on MR3
+#define TMR_TMR16B1MCR_MR3_INT_ENABLED ((unsigned int) 0x00000200)
+#define TMR_TMR16B1MCR_MR3_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR3_RESET_MASK ((unsigned int) 0x00000400) // Reset on MR3
+#define TMR_TMR16B1MCR_MR3_RESET_ENABLED ((unsigned int) 0x00000400)
+#define TMR_TMR16B1MCR_MR3_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1MCR_MR3_STOP_MASK ((unsigned int) 0x00000800) // Stop on MR3
+#define TMR_TMR16B1MCR_MR3_STOP_ENABLED ((unsigned int) 0x00000800)
+#define TMR_TMR16B1MCR_MR3_STOP_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_TMR16B1CCR_CAP0RE_MASK ((unsigned int) 0x00000001) // Capture on rising edge
+#define TMR_TMR16B1CCR_CAP0RE_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR16B1CCR_CAP0RE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1CCR_CAP0FE_MASK ((unsigned int) 0x00000002) // Capture on falling edge
+#define TMR_TMR16B1CCR_CAP0FE_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR16B1CCR_CAP0FE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1CCR_CAP0I_MASK ((unsigned int) 0x00000004) // Interrupt on CAP0 event
+#define TMR_TMR16B1CCR_CAP0I_ENABLED ((unsigned int) 0x00000004)
+#define TMR_TMR16B1CCR_CAP0I_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_TMR16B1EMR_EM0_MASK ((unsigned int) 0x00000001) // External match 0
+#define TMR_TMR16B1EMR_EM0 ((unsigned int) 0x00000001)
+#define TMR_TMR16B1EMR_EMC0_MASK ((unsigned int) 0x00000030)
+#define TMR_TMR16B1EMR_EMC0_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR16B1EMR_EMC0_LOW ((unsigned int) 0x00000010)
+#define TMR_TMR16B1EMR_EMC0_HIGH ((unsigned int) 0x00000020)
+#define TMR_TMR16B1EMR_EMC0_TOGGLE ((unsigned int) 0x00000030)
+#define TMR_TMR16B1EMR_EM1_MASK ((unsigned int) 0x00000002) // External match 1
+#define TMR_TMR16B1EMR_EM1 ((unsigned int) 0x00000002)
+#define TMR_TMR16B1EMR_EMC1_MASK ((unsigned int) 0x000000C0)
+#define TMR_TMR16B1EMR_EMC1_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR16B1EMR_EMC1_LOW ((unsigned int) 0x00000040)
+#define TMR_TMR16B1EMR_EMC1_HIGH ((unsigned int) 0x00000080)
+#define TMR_TMR16B1EMR_EMC1_TOGGLE ((unsigned int) 0x000000C0)
+#define TMR_TMR16B1EMR_EM2_MASK ((unsigned int) 0x00000004) // External match 2
+#define TMR_TMR16B1EMR_EM2 ((unsigned int) 0x00000004)
+#define TMR_TMR16B1EMR_EMC2_MASK ((unsigned int) 0x00000300)
+#define TMR_TMR16B1EMR_EMC2_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR16B1EMR_EMC2_LOW ((unsigned int) 0x00000100)
+#define TMR_TMR16B1EMR_EMC2_HIGH ((unsigned int) 0x00000200)
+#define TMR_TMR16B1EMR_EMC2_TOGGLE ((unsigned int) 0x00000300)
+#define TMR_TMR16B1EMR_EM3_MASK ((unsigned int) 0x00000008) // External match 3
+#define TMR_TMR16B1EMR_EM3 ((unsigned int) 0x00000008)
+#define TMR_TMR16B1EMR_EMC3_MASK ((unsigned int) 0x00000C00)
+#define TMR_TMR16B1EMR_EMC3_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR16B1EMR_EMC3_LOW ((unsigned int) 0x00000400)
+#define TMR_TMR16B1EMR_EMC3_HIGH ((unsigned int) 0x00000800)
+#define TMR_TMR16B1EMR_EMC3_TOGGLE ((unsigned int) 0x00000C00)
+
+#define TMR_TMR16B1CTCR_CTMODE_MASK ((unsigned int) 0x00000003) // Counter/Timer mode
+#define TMR_TMR16B1CTCR_CTMODE_TIMER ((unsigned int) 0x00000000) // Timer Mode: Every rising PCLK edge
+#define TMR_TMR16B1CTCR_CTMODE_COUNTERRISING ((unsigned int) 0x00000001) // Counter: TC increments on rising edge of input
+#define TMR_TMR16B1CTCR_CTMODE_COUNTERFALLING ((unsigned int) 0x00000002) // Counter: TC increments on falling edge of input
+#define TMR_TMR16B1CTCR_CTMODE_COUNTERBOTH ((unsigned int) 0x00000003) // Counter: TC increments on both edges of input
+#define TMR_TMR16B1CTCR_CINPUTSELECT_MASK ((unsigned int) 0x0000000C)
+#define TMR_TMR16B1CTCR_CINPUTSELECT ((unsigned int) 0x00000000) // CINPUTSELECT must be set to 00
+
+#define TMR_TMR16B1PWMC_PWM0_MASK ((unsigned int) 0x00000001)
+#define TMR_TMR16B1PWMC_PWM0_ENABLED ((unsigned int) 0x00000001) // PWM mode is enabled for CT16Bn_MAT0
+#define TMR_TMR16B1PWMC_PWM0_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1PWMC_PWM1_MASK ((unsigned int) 0x00000002)
+#define TMR_TMR16B1PWMC_PWM1_ENABLED ((unsigned int) 0x00000002) // PWM mode is enabled for CT16Bn_MAT1
+#define TMR_TMR16B1PWMC_PWM1_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1PWMC_PWM2_MASK ((unsigned int) 0x00000004)
+#define TMR_TMR16B1PWMC_PWM2_ENABLED ((unsigned int) 0x00000004) // PWM mode is enabled for CT16Bn_MAT2
+#define TMR_TMR16B1PWMC_PWM2_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR16B1PWMC_PWM3_MASK ((unsigned int) 0x00000008)
+#define TMR_TMR16B1PWMC_PWM3_ENABLED ((unsigned int) 0x00000008)
+#define TMR_TMR16B1PWMC_PWM3_DISABLED ((unsigned int) 0x00000000)
+
+/*##############################################################################
+## 32-Bit Timers (CT32B0/1)
+##############################################################################*/
+
+#define TMR_CT32B0_BASE_ADDRESS (0x40014000)
+
+#define TMR_TMR32B0IR (*(pREG32 (0x40014000))) // Interrupt register
+#define TMR_TMR32B0TCR (*(pREG32 (0x40014004))) // Timer control register
+#define TMR_TMR32B0TC (*(pREG32 (0x40014008))) // Timer counter
+#define TMR_TMR32B0PR (*(pREG32 (0x4001400C))) // Prescale register
+#define TMR_TMR32B0PC (*(pREG32 (0x40014010))) // Prescale counter register
+#define TMR_TMR32B0MCR (*(pREG32 (0x40014014))) // Match control register
+#define TMR_TMR32B0MR0 (*(pREG32 (0x40014018))) // Match register 0
+#define TMR_TMR32B0MR1 (*(pREG32 (0x4001401C))) // Match register 1
+#define TMR_TMR32B0MR2 (*(pREG32 (0x40014020))) // Match register 2
+#define TMR_TMR32B0MR3 (*(pREG32 (0x40014024))) // Match register 3
+#define TMR_TMR32B0CCR (*(pREG32 (0x40014028))) // Capture control register
+#define TMR_TMR32B0CR0 (*(pREG32 (0x4001402C))) // Capture register
+#define TMR_TMR32B0EMR (*(pREG32 (0x4001403C))) // External match register
+#define TMR_TMR32B0CTCR (*(pREG32 (0x40014070))) // Count control register
+#define TMR_TMR32B0PWMC (*(pREG32 (0x40014074))) // PWM control register
+
+#define TMR_TMR32B0IR_MR0_MASK ((unsigned int) 0x00000001) // Interrupt flag for match channel 0
+#define TMR_TMR32B0IR_MR0 ((unsigned int) 0x00000001)
+#define TMR_TMR32B0IR_MR1_MASK ((unsigned int) 0x00000002) // Interrupt flag for match channel 1
+#define TMR_TMR32B0IR_MR1 ((unsigned int) 0x00000002)
+#define TMR_TMR32B0IR_MR2_MASK ((unsigned int) 0x00000004) // Interrupt flag for match channel 2
+#define TMR_TMR32B0IR_MR2 ((unsigned int) 0x00000004)
+#define TMR_TMR32B0IR_MR3_MASK ((unsigned int) 0x00000008) // Interrupt flag for match channel 3
+#define TMR_TMR32B0IR_MR3 ((unsigned int) 0x00000008)
+#define TMR_TMR32B0IR_CR0_MASK ((unsigned int) 0x00000010) // Interrupt flag for capture channel 0 event
+#define TMR_TMR32B0IR_CR0 ((unsigned int) 0x00000010)
+#define TMR_TMR32B0IR_MASK_ALL ((unsigned int) 0x0000001F)
+
+#define TMR_TMR32B0TCR_COUNTERENABLE_MASK ((unsigned int) 0x00000001) // Counter enable
+#define TMR_TMR32B0TCR_COUNTERENABLE_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR32B0TCR_COUNTERENABLE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0TCR_COUNTERRESET_MASK ((unsigned int) 0x00000002)
+#define TMR_TMR32B0TCR_COUNTERRESET_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR32B0TCR_COUNTERRESET_DISABLED ((unsigned int) 0x00000002)
+
+#define TMR_TMR32B0MCR_MR0_INT_MASK ((unsigned int) 0x00000001) // Interrupt on MRO
+#define TMR_TMR32B0MCR_MR0_INT_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR32B0MCR_MR0_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR0_RESET_MASK ((unsigned int) 0x00000002) // Reset on MR0
+#define TMR_TMR32B0MCR_MR0_RESET_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR32B0MCR_MR0_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR0_STOP_MASK ((unsigned int) 0x00000004) // Stop on MR0
+#define TMR_TMR32B0MCR_MR0_STOP_ENABLED ((unsigned int) 0x00000004)
+#define TMR_TMR32B0MCR_MR0_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR1_INT_MASK ((unsigned int) 0x00000008) // Interrupt on MR1
+#define TMR_TMR32B0MCR_MR1_INT_ENABLED ((unsigned int) 0x00000008)
+#define TMR_TMR32B0MCR_MR1_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR1_RESET_MASK ((unsigned int) 0x00000010) // Reset on MR1
+#define TMR_TMR32B0MCR_MR1_RESET_ENABLED ((unsigned int) 0x00000010)
+#define TMR_TMR32B0MCR_MR1_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR1_STOP_MASK ((unsigned int) 0x00000020) // Stop on MR1
+#define TMR_TMR32B0MCR_MR1_STOP_ENABLED ((unsigned int) 0x00000020)
+#define TMR_TMR32B0MCR_MR1_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR2_INT_MASK ((unsigned int) 0x00000040) // Interrupt on MR2
+#define TMR_TMR32B0MCR_MR2_INT_ENABLED ((unsigned int) 0x00000040)
+#define TMR_TMR32B0MCR_MR2_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR2_RESET_MASK ((unsigned int) 0x00000080) // Reset on MR2
+#define TMR_TMR32B0MCR_MR2_RESET_ENABLED ((unsigned int) 0x00000080)
+#define TMR_TMR32B0MCR_MR2_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR2_STOP_MASK ((unsigned int) 0x00000100) // Stop on MR2
+#define TMR_TMR32B0MCR_MR2_STOP_ENABLED ((unsigned int) 0x00000100)
+#define TMR_TMR32B0MCR_MR2_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR3_INT_MASK ((unsigned int) 0x00000200) // Interrupt on MR3
+#define TMR_TMR32B0MCR_MR3_INT_ENABLED ((unsigned int) 0x00000200)
+#define TMR_TMR32B0MCR_MR3_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR3_RESET_MASK ((unsigned int) 0x00000400) // Reset on MR3
+#define TMR_TMR32B0MCR_MR3_RESET_ENABLED ((unsigned int) 0x00000400)
+#define TMR_TMR32B0MCR_MR3_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0MCR_MR3_STOP_MASK ((unsigned int) 0x00000800) // Stop on MR3
+#define TMR_TMR32B0MCR_MR3_STOP_ENABLED ((unsigned int) 0x00000800)
+#define TMR_TMR32B0MCR_MR3_STOP_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_TMR32B0CCR_CAP0RE_MASK ((unsigned int) 0x00000001) // Capture on rising edge
+#define TMR_TMR32B0CCR_CAP0RE_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR32B0CCR_CAP0RE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0CCR_CAP0FE_MASK ((unsigned int) 0x00000002) // Capture on falling edge
+#define TMR_TMR32B0CCR_CAP0FE_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR32B0CCR_CAP0FE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0CCR_CAP0I_MASK ((unsigned int) 0x00000004) // Interrupt on CAP0 event
+#define TMR_TMR32B0CCR_CAP0I_ENABLED ((unsigned int) 0x00000004)
+#define TMR_TMR32B0CCR_CAP0I_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_TMR32B0EMR_EM0_MASK ((unsigned int) 0x00000001) // External match 0
+#define TMR_TMR32B0EMR_EM0 ((unsigned int) 0x00000001)
+#define TMR_TMR32B0EMR_EMC0_MASK ((unsigned int) 0x00000030)
+#define TMR_TMR32B0EMR_EMC0_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR32B0EMR_EMC0_LOW ((unsigned int) 0x00000010)
+#define TMR_TMR32B0EMR_EMC0_HIGH ((unsigned int) 0x00000020)
+#define TMR_TMR32B0EMR_EMC0_TOGGLE ((unsigned int) 0x00000030)
+#define TMR_TMR32B0EMR_EM1_MASK ((unsigned int) 0x00000002) // External match 1
+#define TMR_TMR32B0EMR_EM1 ((unsigned int) 0x00000002)
+#define TMR_TMR32B0EMR_EMC1_MASK ((unsigned int) 0x000000C0)
+#define TMR_TMR32B0EMR_EMC1_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR32B0EMR_EMC1_LOW ((unsigned int) 0x00000040)
+#define TMR_TMR32B0EMR_EMC1_HIGH ((unsigned int) 0x00000080)
+#define TMR_TMR32B0EMR_EMC1_TOGGLE ((unsigned int) 0x000000C0)
+#define TMR_TMR32B0EMR_EM2_MASK ((unsigned int) 0x00000004) // External match 2
+#define TMR_TMR32B0EMR_EM2 ((unsigned int) 0x00000004)
+#define TMR_TMR32B0EMR_EMC2_MASK ((unsigned int) 0x00000300)
+#define TMR_TMR32B0EMR_EMC2_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR32B0EMR_EMC2_LOW ((unsigned int) 0x00000100)
+#define TMR_TMR32B0EMR_EMC2_HIGH ((unsigned int) 0x00000200)
+#define TMR_TMR32B0EMR_EMC2_TOGGLE ((unsigned int) 0x00000300)
+#define TMR_TMR32B0EMR_EM3_MASK ((unsigned int) 0x00000008) // External match 3
+#define TMR_TMR32B0EMR_EM3 ((unsigned int) 0x00000008)
+#define TMR_TMR32B0EMR_EMC3_MASK ((unsigned int) 0x00000C00)
+#define TMR_TMR32B0EMR_EMC3_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR32B0EMR_EMC3_LOW ((unsigned int) 0x00000400)
+#define TMR_TMR32B0EMR_EMC3_HIGH ((unsigned int) 0x00000800)
+#define TMR_TMR32B0EMR_EMC3_TOGGLE ((unsigned int) 0x00000C00)
+
+#define TMR_TMR32B0CTCR_CTMODE_MASK ((unsigned int) 0x00000003) // Counter/Timer mode
+#define TMR_TMR32B0CTCR_CTMODE_TIMER ((unsigned int) 0x00000000) // Timer Mode: Every rising PCLK edge
+#define TMR_TMR32B0CTCR_CTMODE_COUNTERRISING ((unsigned int) 0x00000001) // Counter: TC increments on rising edge of input
+#define TMR_TMR32B0CTCR_CTMODE_COUNTERFALLING ((unsigned int) 0x00000002) // Counter: TC increments on falling edge of input
+#define TMR_TMR32B0CTCR_CTMODE_COUNTERBOTH ((unsigned int) 0x00000003) // Counter: TC increments on both edges of input
+#define TMR_TMR32B0CTCR_CINPUTSELECT_MASK ((unsigned int) 0x0000000C)
+#define TMR_TMR32B0CTCR_CINPUTSELECT ((unsigned int) 0x00000000) // CINPUTSELECT must be set to 00
+
+#define TMR_TMR32B0PWMC_PWM0_MASK ((unsigned int) 0x00000001)
+#define TMR_TMR32B0PWMC_PWM0_ENABLED ((unsigned int) 0x00000001) // PWM mode is enabled for CT32Bn_MAT0
+#define TMR_TMR32B0PWMC_PWM0_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0PWMC_PWM1_MASK ((unsigned int) 0x00000002)
+#define TMR_TMR32B0PWMC_PWM1_ENABLED ((unsigned int) 0x00000002) // PWM mode is enabled for CT32Bn_MAT1
+#define TMR_TMR32B0PWMC_PWM1_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0PWMC_PWM2_MASK ((unsigned int) 0x00000004)
+#define TMR_TMR32B0PWMC_PWM2_ENABLED ((unsigned int) 0x00000004) // PWM mode is enabled for CT32Bn_MAT2
+#define TMR_TMR32B0PWMC_PWM2_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B0PWMC_PWM3_MASK ((unsigned int) 0x00000008)
+#define TMR_TMR32B0PWMC_PWM3_ENABLED ((unsigned int) 0x00000008) // PWM mode is enabled for CT32Bn_MAT3
+#define TMR_TMR32B0PWMC_PWM3_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_CT32B1_BASE_ADDRESS (0x40018000)
+
+#define TMR_TMR32B1IR (*(pREG32 (0x40018000))) // Interrupt register
+#define TMR_TMR32B1TCR (*(pREG32 (0x40018004))) // Timer control register
+#define TMR_TMR32B1TC (*(pREG32 (0x40018008))) // Timer counter
+#define TMR_TMR32B1PR (*(pREG32 (0x4001800C))) // Prescale register
+#define TMR_TMR32B1PC (*(pREG32 (0x40018010))) // Prescale counter register
+#define TMR_TMR32B1MCR (*(pREG32 (0x40018014))) // Match control register
+#define TMR_TMR32B1MR0 (*(pREG32 (0x40018018))) // Match register 0
+#define TMR_TMR32B1MR1 (*(pREG32 (0x4001801C))) // Match register 1
+#define TMR_TMR32B1MR2 (*(pREG32 (0x40018020))) // Match register 2
+#define TMR_TMR32B1MR3 (*(pREG32 (0x40018024))) // Match register 3
+#define TMR_TMR32B1CCR (*(pREG32 (0x40018028))) // Capture control register
+#define TMR_TMR32B1CR0 (*(pREG32 (0x4001802C))) // Capture register
+#define TMR_TMR32B1EMR (*(pREG32 (0x4001803C))) // External match register
+#define TMR_TMR32B1CTCR (*(pREG32 (0x40018070))) // Count control register
+#define TMR_TMR32B1PWMC (*(pREG32 (0x40018074))) // PWM control register
+
+#define TMR_TMR32B1IR_MR0_MASK ((unsigned int) 0x00000001) // Interrupt flag for match channel 0
+#define TMR_TMR32B1IR_MR0 ((unsigned int) 0x00000001)
+#define TMR_TMR32B1IR_MR1_MASK ((unsigned int) 0x00000002) // Interrupt flag for match channel 1
+#define TMR_TMR32B1IR_MR1 ((unsigned int) 0x00000002)
+#define TMR_TMR32B1IR_MR2_MASK ((unsigned int) 0x00000004) // Interrupt flag for match channel 2
+#define TMR_TMR32B1IR_MR2 ((unsigned int) 0x00000004)
+#define TMR_TMR32B1IR_MR3_MASK ((unsigned int) 0x00000008) // Interrupt flag for match channel 3
+#define TMR_TMR32B1IR_MR3 ((unsigned int) 0x00000008)
+#define TMR_TMR32B1IR_CR0_MASK ((unsigned int) 0x00000010) // Interrupt flag for capture channel 0 event
+#define TMR_TMR32B1IR_CR0 ((unsigned int) 0x00000010)
+#define TMR_TMR32B1IR_MASK_ALL ((unsigned int) 0x0000001F)
+
+#define TMR_TMR32B1TCR_COUNTERENABLE_MASK ((unsigned int) 0x00000001) // Counter enable
+#define TMR_TMR32B1TCR_COUNTERENABLE_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR32B1TCR_COUNTERENABLE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1TCR_COUNTERRESET_MASK ((unsigned int) 0x00000002)
+#define TMR_TMR32B1TCR_COUNTERRESET_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR32B1TCR_COUNTERRESET_DISABLED ((unsigned int) 0x00000002)
+
+#define TMR_TMR32B1MCR_MR0_INT_MASK ((unsigned int) 0x00000001) // Interrupt on MRO
+#define TMR_TMR32B1MCR_MR0_INT_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR32B1MCR_MR0_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR0_RESET_MASK ((unsigned int) 0x00000002) // Reset on MR0
+#define TMR_TMR32B1MCR_MR0_RESET_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR32B1MCR_MR0_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR0_STOP_MASK ((unsigned int) 0x00000004) // Stop on MR0
+#define TMR_TMR32B1MCR_MR0_STOP_ENABLED ((unsigned int) 0x00000004)
+#define TMR_TMR32B1MCR_MR0_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR1_INT_MASK ((unsigned int) 0x00000008) // Interrupt on MR1
+#define TMR_TMR32B1MCR_MR1_INT_ENABLED ((unsigned int) 0x00000008)
+#define TMR_TMR32B1MCR_MR1_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR1_RESET_MASK ((unsigned int) 0x00000010) // Reset on MR1
+#define TMR_TMR32B1MCR_MR1_RESET_ENABLED ((unsigned int) 0x00000010)
+#define TMR_TMR32B1MCR_MR1_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR1_STOP_MASK ((unsigned int) 0x00000020) // Stop on MR1
+#define TMR_TMR32B1MCR_MR1_STOP_ENABLED ((unsigned int) 0x00000020)
+#define TMR_TMR32B1MCR_MR1_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR2_INT_MASK ((unsigned int) 0x00000040) // Interrupt on MR2
+#define TMR_TMR32B1MCR_MR2_INT_ENABLED ((unsigned int) 0x00000040)
+#define TMR_TMR32B1MCR_MR2_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR2_RESET_MASK ((unsigned int) 0x00000080) // Reset on MR2
+#define TMR_TMR32B1MCR_MR2_RESET_ENABLED ((unsigned int) 0x00000080)
+#define TMR_TMR32B1MCR_MR2_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR2_STOP_MASK ((unsigned int) 0x00000100) // Stop on MR2
+#define TMR_TMR32B1MCR_MR2_STOP_ENABLED ((unsigned int) 0x00000100)
+#define TMR_TMR32B1MCR_MR2_STOP_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR3_INT_MASK ((unsigned int) 0x00000200) // Interrupt on MR3
+#define TMR_TMR32B1MCR_MR3_INT_ENABLED ((unsigned int) 0x00000200)
+#define TMR_TMR32B1MCR_MR3_INT_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR3_RESET_MASK ((unsigned int) 0x00000400) // Reset on MR3
+#define TMR_TMR32B1MCR_MR3_RESET_ENABLED ((unsigned int) 0x00000400)
+#define TMR_TMR32B1MCR_MR3_RESET_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1MCR_MR3_STOP_MASK ((unsigned int) 0x00000800) // Stop on MR3
+#define TMR_TMR32B1MCR_MR3_STOP_ENABLED ((unsigned int) 0x00000800)
+#define TMR_TMR32B1MCR_MR3_STOP_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_TMR32B1CCR_CAP0RE_MASK ((unsigned int) 0x00000001) // Capture on rising edge
+#define TMR_TMR32B1CCR_CAP0RE_ENABLED ((unsigned int) 0x00000001)
+#define TMR_TMR32B1CCR_CAP0RE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1CCR_CAP0FE_MASK ((unsigned int) 0x00000002) // Capture on falling edge
+#define TMR_TMR32B1CCR_CAP0FE_ENABLED ((unsigned int) 0x00000002)
+#define TMR_TMR32B1CCR_CAP0FE_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1CCR_CAP0I_MASK ((unsigned int) 0x00000004) // Interrupt on CAP0 event
+#define TMR_TMR32B1CCR_CAP0I_ENABLED ((unsigned int) 0x00000004)
+#define TMR_TMR32B1CCR_CAP0I_DISABLED ((unsigned int) 0x00000000)
+
+#define TMR_TMR32B1EMR_EM0_MASK ((unsigned int) 0x00000001) // External match 0
+#define TMR_TMR32B1EMR_EM0 ((unsigned int) 0x00000001)
+#define TMR_TMR32B1EMR_EMC0_MASK ((unsigned int) 0x00000030)
+#define TMR_TMR32B1EMR_EMC0_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR32B1EMR_EMC0_LOW ((unsigned int) 0x00000010)
+#define TMR_TMR32B1EMR_EMC0_HIGH ((unsigned int) 0x00000020)
+#define TMR_TMR32B1EMR_EMC0_TOGGLE ((unsigned int) 0x00000030)
+#define TMR_TMR32B1EMR_EM1_MASK ((unsigned int) 0x00000002) // External match 1
+#define TMR_TMR32B1EMR_EM1 ((unsigned int) 0x00000002)
+#define TMR_TMR32B1EMR_EMC1_MASK ((unsigned int) 0x000000C0)
+#define TMR_TMR32B1EMR_EMC1_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR32B1EMR_EMC1_LOW ((unsigned int) 0x00000040)
+#define TMR_TMR32B1EMR_EMC1_HIGH ((unsigned int) 0x00000080)
+#define TMR_TMR32B1EMR_EMC1_TOGGLE ((unsigned int) 0x000000C0)
+#define TMR_TMR32B1EMR_EM2_MASK ((unsigned int) 0x00000004) // External match 2
+#define TMR_TMR32B1EMR_EM2 ((unsigned int) 0x00000004)
+#define TMR_TMR32B1EMR_EMC2_MASK ((unsigned int) 0x00000300)
+#define TMR_TMR32B1EMR_EMC2_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR32B1EMR_EMC2_LOW ((unsigned int) 0x00000100)
+#define TMR_TMR32B1EMR_EMC2_HIGH ((unsigned int) 0x00000200)
+#define TMR_TMR32B1EMR_EMC2_TOGGLE ((unsigned int) 0x00000300)
+#define TMR_TMR32B1EMR_EM3_MASK ((unsigned int) 0x00000008) // External match 3
+#define TMR_TMR32B1EMR_EM3 ((unsigned int) 0x00000008)
+#define TMR_TMR32B1EMR_EMC3_MASK ((unsigned int) 0x00000C00)
+#define TMR_TMR32B1EMR_EMC3_DONOTHING ((unsigned int) 0x00000000)
+#define TMR_TMR32B1EMR_EMC3_LOW ((unsigned int) 0x00000400)
+#define TMR_TMR32B1EMR_EMC3_HIGH ((unsigned int) 0x00000800)
+#define TMR_TMR32B1EMR_EMC3_TOGGLE ((unsigned int) 0x00000C00)
+
+#define TMR_TMR32B1CTCR_CTMODE_MASK ((unsigned int) 0x00000003) // Counter/Timer mode
+#define TMR_TMR32B1CTCR_CTMODE_TIMER ((unsigned int) 0x00000000) // Timer Mode: Every rising PCLK edge
+#define TMR_TMR32B1CTCR_CTMODE_COUNTERRISING ((unsigned int) 0x00000001) // Counter: TC increments on rising edge of input
+#define TMR_TMR32B1CTCR_CTMODE_COUNTERFALLING ((unsigned int) 0x00000002) // Counter: TC increments on falling edge of input
+#define TMR_TMR32B1CTCR_CTMODE_COUNTERBOTH ((unsigned int) 0x00000003) // Counter: TC increments on both edges of input
+#define TMR_TMR32B1CTCR_CINPUTSELECT_MASK ((unsigned int) 0x0000000C)
+#define TMR_TMR32B1CTCR_CINPUTSELECT ((unsigned int) 0x00000000) // CINPUTSELECT must be set to 00
+
+#define TMR_TMR32B1PWMC_PWM0_MASK ((unsigned int) 0x00000001)
+#define TMR_TMR32B1PWMC_PWM0_ENABLED ((unsigned int) 0x00000001) // PWM mode is enabled for CT32Bn_MAT0
+#define TMR_TMR32B1PWMC_PWM0_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1PWMC_PWM1_MASK ((unsigned int) 0x00000002)
+#define TMR_TMR32B1PWMC_PWM1_ENABLED ((unsigned int) 0x00000002) // PWM mode is enabled for CT32Bn_MAT1
+#define TMR_TMR32B1PWMC_PWM1_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1PWMC_PWM2_MASK ((unsigned int) 0x00000004)
+#define TMR_TMR32B1PWMC_PWM2_ENABLED ((unsigned int) 0x00000004) // PWM mode is enabled for CT32Bn_MAT2
+#define TMR_TMR32B1PWMC_PWM2_DISABLED ((unsigned int) 0x00000000)
+#define TMR_TMR32B1PWMC_PWM3_MASK ((unsigned int) 0x00000008)
+#define TMR_TMR32B1PWMC_PWM3_ENABLED ((unsigned int) 0x00000008) // PWM mode is enabled for CT32Bn_MAT3
+#define TMR_TMR32B1PWMC_PWM3_DISABLED ((unsigned int) 0x00000000)
+
+/*##############################################################################
+## System Tick Timer
+##############################################################################*/
+
+#define SYSTICK_BASE_ADDRESS (0xE000E000)
+
+#define SYSTICK_STCTRL (*(pREG32 (0xE000E010))) // System tick control
+#define SYSTICK_STRELOAD (*(pREG32 (0xE000E014))) // System timer reload
+#define SYSTICK_STCURR (*(pREG32 (0xE000E018))) // System timer current
+#define SYSTICK_STCALIB (*(pREG32 (0xE000E01C))) // System timer calibration
+
+/* STCTRL (System Timer Control and status register)
+ The STCTRL register contains control information for the System Tick Timer, and provides
+ a status flag. */
+
+#define SYSTICK_STCTRL_ENABLE (0x00000001) // System tick counter enable
+#define SYSTICK_STCTRL_TICKINT (0x00000002) // System tick interrupt enable
+#define SYSTICK_STCTRL_CLKSOURCE (0x00000004) // NOTE: This isn't documented but is based on NXP examples
+#define SYSTICK_STCTRL_COUNTFLAG (0x00010000) // System tick counter flag
+
+/* STRELOAD (System Timer Reload value register)
+ The STRELOAD register is set to the value that will be loaded into the System Tick Timer
+ whenever it counts down to zero. This register is loaded by software as part of timer
+ initialization. The STCALIB register may be read and used as the value for STRELOAD if
+ the CPU or external clock is running at the frequency intended for use with the STCALIB
+ value. */
+
+#define SYSTICK_STRELOAD_MASK (0x00FFFFFF)
+
+/* STCURR (System Timer Current value register)
+ The STCURR register returns the current count from the System Tick counter when it is
+ read by software. */
+
+#define SYSTICK_STCURR_MASK (0x00FFFFFF)
+
+/* STCALIB (System Timer Calibration value register) */
+
+#define SYSTICK_STCALIB_TENMS_MASK (0x00FFFFFF)
+#define SYSTICK_STCALIB_SKEW_MASK (0x40000000)
+#define SYSTICK_STCALIB_NOREF_MASK (0x80000000)
+
+/*##############################################################################
+## ADC
+##############################################################################*/
+
+#define ADC_AD0_BASE_ADDRESS (0x4001C000)
+
+#define ADC_AD0CR (*(pREG32 (0x4001C000))) // ADC Control Register
+#define ADC_AD0GDR ((unsigned int) 0x4001C004) // ADC Global Data Register
+#define ADC_AD0INTEN ((unsigned int) 0x4001C00C) // ADC Interrupt Enable Register
+#define ADC_AD0DR0 ((unsigned int) 0x4001C010) // ADC Data Register 0
+#define ADC_AD0DR1 ((unsigned int) 0x4001C014) // ADC Data Register 1
+#define ADC_AD0DR2 ((unsigned int) 0x4001C018) // ADC Data Register 2
+#define ADC_AD0DR3 ((unsigned int) 0x4001C01C) // ADC Data Register 3
+#define ADC_AD0DR4 ((unsigned int) 0x4001C020) // ADC Data Register 4
+#define ADC_AD0DR5 ((unsigned int) 0x4001C024) // ADC Data Register 5
+#define ADC_AD0DR6 ((unsigned int) 0x4001C028) // ADC Data Register 6
+#define ADC_AD0DR7 ((unsigned int) 0x4001C02C) // ADC Data Register 7
+#define ADC_AD0STAT ((unsigned int) 0x4001C030) // ADC Status Register
+
+#define ADC_AD0CR_SEL_MASK (0x000000FF)
+#define ADC_AD0CR_SEL_AD0 (0x00000001)
+#define ADC_AD0CR_SEL_AD1 (0x00000002)
+#define ADC_AD0CR_SEL_AD2 (0x00000004)
+#define ADC_AD0CR_SEL_AD3 (0x00000008)
+#define ADC_AD0CR_SEL_AD4 (0x00000010)
+#define ADC_AD0CR_SEL_AD5 (0x00000020)
+#define ADC_AD0CR_SEL_AD6 (0x00000040)
+#define ADC_AD0CR_SEL_AD7 (0x00000080)
+#define ADC_AD0CR_CLKDIV_MASK (0x0000FF00)
+#define ADC_AD0CR_BURST_MASK (0x00010000)
+#define ADC_AD0CR_BURST_SWMODE (0x00000000)
+#define ADC_AD0CR_BURST_HWSCANMODE (0x00010000)
+#define ADC_AD0CR_CLKS_MASK (0x000E0000)
+#define ADC_AD0CR_CLKS_10BITS (0x00000000)
+#define ADC_AD0CR_CLKS_9BITS (0x00020000)
+#define ADC_AD0CR_CLKS_8BITS (0x00040000)
+#define ADC_AD0CR_CLKS_7BITS (0x00060000)
+#define ADC_AD0CR_CLKS_6BITS (0x00080000)
+#define ADC_AD0CR_CLKS_5BITS (0x000A0000)
+#define ADC_AD0CR_CLKS_4BITS (0x000C0000)
+#define ADC_AD0CR_CLKS_3BITS (0x000E0000)
+#define ADC_AD0CR_START_MASK (0x07000000)
+#define ADC_AD0CR_START_NOSTART (0x00000000)
+#define ADC_AD0CR_START_STARTNOW (0x01000000)
+#define ADC_AD0CR_EDGE_MASK (0x08000000)
+#define ADC_AD0CR_EDGE_FALLING (0x08000000)
+#define ADC_AD0CR_EDGE_RISING (0x00000000)
+
+/* AD9GDR (A/D Global Data Register)
+ The A/D Global Data Register contains the result of the most recent A/D conversion. This
+ includes the data, DONE, and Overrun flags, and the number of the A/D channel to which
+ the data relates. */
+
+#define ADC_AD0GDR_RESULT_MASK (0x0000FFC0)
+#define ADC_AD0GDR_CHN_MASK (0x07000000) // Channel from which the results were converted
+#define ADC_AD0GDR_OVERUN_MASK (0x40000000)
+#define ADC_AD0GDR_OVERUN (0x40000000)
+#define ADC_AD0GDR_DONE_MASK (0x80000000)
+#define ADC_AD0GDR_DONE (0x80000000)
+
+/* AD0STAT (A/D Status Register)
+ The A/D Status register allows checking the status of all A/D channels simultaneously.
+ The DONE and OVERRUN flags appearing in the ADDRn register for each A/D channel
+ are mirrored in ADSTAT. The interrupt flag (the logical OR of all DONE flags) is also found
+ in ADSTAT. */
+
+#define ADC_AD0STAT_DONE0_MASK (0x00000001)
+#define ADC_AD0STAT_DONE0 (0x00000001)
+#define ADC_AD0STAT_DONE1_MASK (0x00000002)
+#define ADC_AD0STAT_DONE1 (0x00000002)
+#define ADC_AD0STAT_DONE2_MASK (0x00000004)
+#define ADC_AD0STAT_DONE2 (0x00000004)
+#define ADC_AD0STAT_DONE3_MASK (0x00000008)
+#define ADC_AD0STAT_DONE3 (0x00000008)
+#define ADC_AD0STAT_DONE4_MASK (0x00000010)
+#define ADC_AD0STAT_DONE4 (0x00000010)
+#define ADC_AD0STAT_DONE5_MASK (0x00000020)
+#define ADC_AD0STAT_DONE5 (0x00000020)
+#define ADC_AD0STAT_DONE6_MASK (0x00000040)
+#define ADC_AD0STAT_DONE6 (0x00000040)
+#define ADC_AD0STAT_DONE7_MASK (0x00000080)
+#define ADC_AD0STAT_DONE7 (0x00000080)
+#define ADC_AD0STAT_OVERRUN0_MASK (0x00000100)
+#define ADC_AD0STAT_OVERRUN0 (0x00000100)
+#define ADC_AD0STAT_OVERRUN1_MASK (0x00000200)
+#define ADC_AD0STAT_OVERRUN1 (0x00000200)
+#define ADC_AD0STAT_OVERRUN2_MASK (0x00000400)
+#define ADC_AD0STAT_OVERRUN2 (0x00000400)
+#define ADC_AD0STAT_OVERRUN3_MASK (0x00000800)
+#define ADC_AD0STAT_OVERRUN3 (0x00000800)
+#define ADC_AD0STAT_OVERRUN4_MASK (0x00001000)
+#define ADC_AD0STAT_OVERRUN4 (0x00001000)
+#define ADC_AD0STAT_OVERRUN5_MASK (0x00002000)
+#define ADC_AD0STAT_OVERRUN5 (0x00002000)
+#define ADC_AD0STAT_OVERRUN6_MASK (0x00004000)
+#define ADC_AD0STAT_OVERRUN6 (0x00004000)
+#define ADC_AD0STAT_OVERRUN7_MASK (0x00008000)
+#define ADC_AD0STAT_OVERRUN7 (0x00008000)
+#define ADC_AD0STAT_ADINT_MASK (0x00010000)
+#define ADC_AD0STAT_ADINT (0x00010000)
+
+/* ADINTEN0 (A/D Interrupt Enable Register)
+ This register allows control over which A/D channels generate an interrupt when a
+ conversion is complete. For example, it may be desirable to use some A/D channels to
+ monitor sensors by continuously performing conversions on them. The most recent
+ results are read by the application program whenever they are needed. In this case, an
+ interrupt is not desirable at the end of each conversion for some A/D channels. */
+
+#define ADC_AD0INTEN_ADINTEN0_MASK (0x00000001)
+#define ADC_AD0INTEN_ADINTEN0 (0x00000001)
+#define ADC_AD0INTEN_ADINTEN1_MASK (0x00000002)
+#define ADC_AD0INTEN_ADINTEN1 (0x00000002)
+#define ADC_AD0INTEN_ADINTEN2_MASK (0x00000004)
+#define ADC_AD0INTEN_ADINTEN2 (0x00000004)
+#define ADC_AD0INTEN_ADINTEN3_MASK (0x00000008)
+#define ADC_AD0INTEN_ADINTEN3 (0x00000008)
+#define ADC_AD0INTEN_ADINTEN4_MASK (0x00000010)
+#define ADC_AD0INTEN_ADINTEN4 (0x00000010)
+#define ADC_AD0INTEN_ADINTEN5_MASK (0x00000020)
+#define ADC_AD0INTEN_ADINTEN5 (0x00000020)
+#define ADC_AD0INTEN_ADINTEN6_MASK (0x00000040)
+#define ADC_AD0INTEN_ADINTEN6 (0x00000040)
+#define ADC_AD0INTEN_ADINTEN7_MASK (0x00000080)
+#define ADC_AD0INTEN_ADINTEN7 (0x00000080)
+#define ADC_AD0INTEN_ADGINTEN_MASK (0x00000100)
+#define ADC_AD0INTEN_ADGINTEN_ENABLE (0x00000100)
+#define ADC_AD0INTEN_ADGINTEN_DISABLE (0x00000000)
+
+/* AD0DR0..7 (A/D Data Registers)
+ The A/D Data Register hold the result when an A/D conversion is complete, and also
+ include the flags that indicate when a conversion has been completed and when a
+ conversion overrun has occurred. */
+
+#define ADC_DR_V_MASK (0x0000FFC0)
+#define ADC_DR_OVERRUN_MASK (0x40000000)
+#define ADC_DR_OVERRUN (0x40000000)
+#define ADC_DR_DONE_MASK (0x80000000)
+#define ADC_DR_DONE (0x80000000)
+
+/*##############################################################################
+## WDT - Watchdog Timer
+##############################################################################*/
+
+#define WDT_BASE_ADDRESS (0x40004000)
+
+#define WDT_WDMOD (*(pREG32 (0x40004000))) // Watchdog mode register
+#define WDT_WDTC (*(pREG32 (0x40004004))) // Watchdog timer constant register
+#define WDT_WDFEED (*(pREG32 (0x40004008))) // Watchdog feed sequence register
+#define WDT_WDTV (*(pREG32 (0x4000400C))) // Watchdog timer value register
+
+/* WDMOD (Watchdog Mode register)
+ The WDMOD register controls the operation of the Watchdog through the combination of
+ WDEN and RESET bits. Note that a watchdog feed must be performed before any
+ changes to the WDMOD register take effect. */
+
+#define WDT_WDMOD_WDEN_DISABLED (0x00000000) // Watchdog enable bit
+#define WDT_WDMOD_WDEN_ENABLED (0x00000001)
+#define WDT_WDMOD_WDEN_MASK (0x00000001)
+#define WDT_WDMOD_WDRESET_DISABLED (0x00000000) // Watchdog reset enable bit
+#define WDT_WDMOD_WDRESET_ENABLED (0x00000002)
+#define WDT_WDMOD_WDRESET_MASK (0x00000002)
+#define WDT_WDMOD_WDTOF (0x00000004) // Watchdog time-out interrupt flag
+#define WDT_WDMOD_WDTOF_MASK (0x00000004) // Set when the watchdog times out
+#define WDT_WDMOD_WDINT (0x00000008) // Watchdog timer interrupt flag
+#define WDT_WDMOD_WDINT_MASK (0x00000008)
+
+/* WDFEED (Watchdog Feed register)
+ Writing 0xAA followed by 0x55 to this register will reload the Watchdog timer with the
+ WDTC value. This operation will also start the Watchdog if it is enabled via the WDMOD
+ register. Setting the WDEN bit in the WDMOD register is not sufficient to enable the
+ Watchdog. A valid feed sequence must be completed after setting WDEN before the
+ Watchdog is capable of generating a reset. Until then, the Watchdog will ignore feed
+ errors. After writing 0xAA to WDFEED, access to any Watchdog register other than writing
+ 0x55 to WDFEED causes an immediate reset/interrupt when the Watchdog is enabled.
+ The reset will be generated during the second PCLK following an incorrect access to a
+ Watchdog register during a feed sequence.
+ Interrupts should be disabled during the feed sequence. An abort condition will occur if an
+ interrupt happens during the feed sequence. */
+
+#define WDT_WDFEED_FEED1 (0x000000AA)
+#define WDT_WDFEED_FEED2 (0x00000055)
+
+/*##############################################################################
+## Misc. Inline Functions
+##############################################################################*/
+
+/**************************************************************************/
+/*!
+ @brief Reverses the bit order of a 32-bit value
+
+ Allows single-cycle reversing of 32-bit values (ASM RBIT)
+
+ @param[in] value
+ The 32-bit value to reverse
+ @returns The reversed value
+*/
+/**************************************************************************/
+static inline uint32_t RBIT(uint32_t value) { uint32_t result=0; __asm volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); return(result); }
+
+/**************************************************************************/
+/*!
+ @brief Causes a system reset and enters the USB Bootloader
+
+ Resets the system using the AIRCR register, and waits in a loop until
+ reset occurs. The resistor/divider on the LPC1343 Reference Design
+ Base Board [1] causes the AIRCR reset to enter the bootloader rather
+ than executing the existing firmware. If you wish to reset and execute
+ the existing firmware, you need to use the watchdog timer to reset
+ (see "wdt/wdt.c").
+
+ [1] http://www.microbuilder.eu/Projects/LPC1343ReferenceDesign.aspx
+*/
+/**************************************************************************/
+static inline void __resetBootloader() { __disable_irq(); SCB_AIRCR = SCB_AIRCR_VECTKEY_VALUE | SCB_AIRCR_SYSRESETREQ; while(1); }
+
+#endif
\ No newline at end of file
--- /dev/null
+/*
+ * Software License Agreement (BSD License)
+ *
+ * Copyright (c) 2010, Roel Verdult
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+// The GCC compiler defines the current architecture derived from the -mcpu argument.
+// When target cpu is the cortex-m0, it automatically defines __ARM_ARCH_6M__
+#ifndef __ARM_ARCH_6M__
+ #error "The target ARM cpu must be Cortex-M0 compatible (-mcpu=cortex-m0)"
+#endif
+
+// Declare a weak alias macro as described in the GCC manual[1][2]
+#define WEAK_ALIAS(f) __attribute__ ((weak, alias (#f)));
+#define SECTION(s) __attribute__ ((section(s)))
+
+/******************************************************************************
+ * Forward undefined IRQ handlers to an infinite loop function. The Handlers
+ * are weakly aliased which means that (re)definitions will overide these.
+ *****************************************************************************/
+
+void irq_undefined() {
+ // Do nothing when occured interrupt is not defined, just keep looping
+ while(1);
+}
+
+void CAN_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void SSP1_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void I2C_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void TIMER16_0_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void TIMER16_1_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void TIMER32_0_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void TIMER32_1_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void SSP0_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void UART_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void USB_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void USB_FIQHandler(void) WEAK_ALIAS(irq_undefined);
+void ADC_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void WDT_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void BOD_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void FMC_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void PIOINT3_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void PIOINT2_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void PIOINT1_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void PIOINT0_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void WAKEUP_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+
+/*****************************************************************************
+ * Forward undefined fault handlers to an infinite loop function. The Handlers
+ * are weakly aliased which means that (re)definitions will overide these.
+ ****************************************************************************/
+
+void fault_undefined() {
+ // Do nothing when occured interrupt is not defined, just keep looping
+ while(1);
+}
+
+void NMI_Handler(void) WEAK_ALIAS(fault_undefined);
+void HardFault_Handler(void) WEAK_ALIAS(fault_undefined);
+void MemManage_Handler(void) WEAK_ALIAS(fault_undefined);
+void BusFault_Handler(void) WEAK_ALIAS(fault_undefined);
+void UsageFault_Handler(void) WEAK_ALIAS(fault_undefined);
+void SVCall_Handler(void) WEAK_ALIAS(fault_undefined);
+void DebugMon_Handler(void) WEAK_ALIAS(fault_undefined);
+void PendSV_Handler(void) WEAK_ALIAS(fault_undefined);
+void SysTick_Handler(void) WEAK_ALIAS(fault_undefined);
+
+/******************************************************************************
+ * Forward undefined IRQ handlers to an infinite loop function. The Handlers
+ * are weakly aliased which means that (re)definitions will overide these.
+ *****************************************************************************/
+
+// Prototype the entry values, which are handled by the linker script
+extern void* stack_entry;
+extern void boot_entry(void);
+
+// Defined irq vectors using simple c code following the description in a white
+// paper from ARM[3] and code example from Simonsson Fun Technologies[4].
+// These vectors are placed at the memory location defined in the linker script
+const void *vectors[] SECTION(".irq_vectors") =
+{
+ // Stack and program reset entry point
+ &stack_entry, // The initial stack pointer
+ boot_entry, // The reset handler
+
+ // Various fault handlers
+ NMI_Handler, // The NMI handler
+ HardFault_Handler, // The hard fault handler
+ MemManage_Handler, // MemManage_Handler
+ BusFault_Handler, // BusFault_Handler
+ UsageFault_Handler, // UsageFault_Handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ SVCall_Handler, // SVCall handler
+ DebugMon_Handler, // DebugMon_Handler
+ 0, // Reserved
+ PendSV_Handler, // The PendSV handler
+ SysTick_Handler, // The SysTick handler
+
+ // Wakeup I/O pins handlers
+ WAKEUP_IRQHandler, // PIO0_0 Wakeup
+ WAKEUP_IRQHandler, // PIO0_1 Wakeup
+ WAKEUP_IRQHandler, // PIO0_2 Wakeup
+ WAKEUP_IRQHandler, // PIO0_3 Wakeup
+ WAKEUP_IRQHandler, // PIO0_4 Wakeup
+ WAKEUP_IRQHandler, // PIO0_5 Wakeup
+ WAKEUP_IRQHandler, // PIO0_6 Wakeup
+ WAKEUP_IRQHandler, // PIO0_7 Wakeup
+ WAKEUP_IRQHandler, // PIO0_8 Wakeup
+ WAKEUP_IRQHandler, // PIO0_9 Wakeup
+ WAKEUP_IRQHandler, // PIO0_10 Wakeup
+ WAKEUP_IRQHandler, // PIO0_11 Wakeup
+ WAKEUP_IRQHandler, // PIO1_0 Wakeup
+
+ // Specific peripheral irq handlers
+ CAN_IRQHandler, // CAN
+ SSP1_IRQHandler, // SSP1
+ I2C_IRQHandler, // I2C0
+ TIMER16_0_IRQHandler, // CT16B0 (16-bit Timer 0)
+ TIMER16_1_IRQHandler, // CT16B1 (16-bit Timer 1)
+ TIMER32_0_IRQHandler, // CT32B0 (32-bit Timer 0)
+ TIMER32_1_IRQHandler, // CT32B1 (32-bit Timer 1)
+ SSP0_IRQHandler, // SSP0
+ UART_IRQHandler, // UART0
+ USB_IRQHandler, // USB IRQ
+ USB_FIQHandler, // USB FIQ
+ ADC_IRQHandler, // ADC (A/D Converter)
+ WDT_IRQHandler, // WDT (Watchdog Timer)
+ BOD_IRQHandler, // BOD (Brownout Detect)
+ FMC_IRQHandler, // Flash (IP2111 Flash Memory Controller)
+ PIOINT3_IRQHandler, // PIO INT3
+ PIOINT2_IRQHandler, // PIO INT2
+ PIOINT1_IRQHandler, // PIO INT1
+ PIOINT0_IRQHandler, // PIO INT0
+};
+
+/******************************************************************************
+ * References
+ * [1] http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html
+ * [2] http://gcc.gnu.org/onlinedocs/gcc/Variable-Attributes.html
+ * [3] http://www.arm.com/files/pdf/Cortex-M3_programming_for_ARM7_developers.pdf
+ * [4] http://fun-tech.se/stm32/OlimexBlinky/mini.php
+ *****************************************************************************/
+
--- /dev/null
+/*
+ * Software License Agreement (BSD License)
+ *
+ * Copyright (c) 2010, Roel Verdult
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+// The GCC compiler defines the current architecture derived from the -mcpu argument.
+// When target cpu is the cortex-m3, it automatically defines __ARM_ARCH_7M__
+#ifndef __ARM_ARCH_7M__
+ #error "The target ARM cpu must be Cortex-M3 compatible (-mcpu=cortex-m3)"
+#endif
+
+// Declare a weak alias macro as described in the GCC manual[1][2]
+#define WEAK_ALIAS(f) __attribute__ ((weak, alias (#f)));
+#define SECTION(s) __attribute__ ((section(s)))
+
+/******************************************************************************
+ * Forward undefined IRQ handlers to an infinite loop function. The Handlers
+ * are weakly aliased which means that (re)definitions will overide these.
+ *****************************************************************************/
+
+void irq_undefined() {
+ // Do nothing when occured interrupt is not defined, just keep looping
+ while(1);
+}
+
+void I2C_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void TIMER16_0_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void TIMER16_1_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void TIMER32_0_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void TIMER32_1_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void SSP_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void UART_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void USB_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void USB_FIQHandler(void) WEAK_ALIAS(irq_undefined);
+void ADC_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void WDT_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void BOD_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void FMC_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void PIOINT3_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void PIOINT2_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void PIOINT1_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void PIOINT0_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+void WAKEUP_IRQHandler(void) WEAK_ALIAS(irq_undefined);
+
+/*****************************************************************************
+ * Forward undefined fault handlers to an infinite loop function. The Handlers
+ * are weakly aliased which means that (re)definitions will overide these.
+ ****************************************************************************/
+
+void fault_undefined() {
+ // Do nothing when occured interrupt is not defined, just keep looping
+ while(1);
+}
+
+void NMI_Handler(void) WEAK_ALIAS(fault_undefined);
+void HardFault_Handler(void) WEAK_ALIAS(fault_undefined);
+void MemManage_Handler(void) WEAK_ALIAS(fault_undefined);
+void BusFault_Handler(void) WEAK_ALIAS(fault_undefined);
+void UsageFault_Handler(void) WEAK_ALIAS(fault_undefined);
+void SVCall_Handler(void) WEAK_ALIAS(fault_undefined);
+void DebugMon_Handler(void) WEAK_ALIAS(fault_undefined);
+void PendSV_Handler(void) WEAK_ALIAS(fault_undefined);
+void SysTick_Handler(void) WEAK_ALIAS(fault_undefined);
+
+/******************************************************************************
+ * Forward undefined IRQ handlers to an infinite loop function. The Handlers
+ * are weakly aliased which means that (re)definitions will overide these.
+ *****************************************************************************/
+
+// Prototype the entry values, which are handled by the linker script
+extern void* stack_entry;
+extern void boot_entry(void);
+
+// Defined irq vectors using simple c code following the description in a white
+// paper from ARM[3] and code example from Simonsson Fun Technologies[4].
+// These vectors are placed at the memory location defined in the linker script
+const void *vectors[] SECTION(".irq_vectors") =
+{
+ // Stack and program reset entry point
+ &stack_entry, // The initial stack pointer
+ boot_entry, // The reset handler
+
+ // Various fault handlers
+ NMI_Handler, // The NMI handler
+ HardFault_Handler, // The hard fault handler
+ MemManage_Handler, // The MPU fault handler
+ BusFault_Handler, // The bus fault handler
+ UsageFault_Handler, // The usage fault handler
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ 0, // Reserved
+ SVCall_Handler, // SVCall handler
+ DebugMon_Handler, // Debug monitor handler
+ 0, // Reserved
+ PendSV_Handler, // The PendSV handler
+ SysTick_Handler, // The SysTick handler
+
+ // Wakeup I/O pins handlers
+ WAKEUP_IRQHandler, // PIO0_0 Wakeup
+ WAKEUP_IRQHandler, // PIO0_1 Wakeup
+ WAKEUP_IRQHandler, // PIO0_2 Wakeup
+ WAKEUP_IRQHandler, // PIO0_3 Wakeup
+ WAKEUP_IRQHandler, // PIO0_4 Wakeup
+ WAKEUP_IRQHandler, // PIO0_5 Wakeup
+ WAKEUP_IRQHandler, // PIO0_6 Wakeup
+ WAKEUP_IRQHandler, // PIO0_7 Wakeup
+ WAKEUP_IRQHandler, // PIO0_8 Wakeup
+ WAKEUP_IRQHandler, // PIO0_9 Wakeup
+ WAKEUP_IRQHandler, // PIO0_10 Wakeup
+ WAKEUP_IRQHandler, // PIO0_11 Wakeup
+ WAKEUP_IRQHandler, // PIO1_0 Wakeup
+ WAKEUP_IRQHandler, // PIO1_1 Wakeup
+ WAKEUP_IRQHandler, // PIO1_2 Wakeup
+ WAKEUP_IRQHandler, // PIO1_3 Wakeup
+ WAKEUP_IRQHandler, // PIO1_4 Wakeup
+ WAKEUP_IRQHandler, // PIO1_5 Wakeup
+ WAKEUP_IRQHandler, // PIO1_6 Wakeup
+ WAKEUP_IRQHandler, // PIO1_7 Wakeup
+ WAKEUP_IRQHandler, // PIO1_8 Wakeup
+ WAKEUP_IRQHandler, // PIO1_9 Wakeup
+ WAKEUP_IRQHandler, // PIO1_10 Wakeup
+ WAKEUP_IRQHandler, // PIO1_11 Wakeup
+ WAKEUP_IRQHandler, // PIO2_0 Wakeup
+ WAKEUP_IRQHandler, // PIO2_1 Wakeup
+ WAKEUP_IRQHandler, // PIO2_2 Wakeup
+ WAKEUP_IRQHandler, // PIO2_3 Wakeup
+ WAKEUP_IRQHandler, // PIO2_4 Wakeup
+ WAKEUP_IRQHandler, // PIO2_5 Wakeup
+ WAKEUP_IRQHandler, // PIO2_6 Wakeup
+ WAKEUP_IRQHandler, // PIO2_7 Wakeup
+ WAKEUP_IRQHandler, // PIO2_8 Wakeup
+ WAKEUP_IRQHandler, // PIO2_9 Wakeup
+ WAKEUP_IRQHandler, // PIO2_10 Wakeup
+ WAKEUP_IRQHandler, // PIO2_11 Wakeup
+ WAKEUP_IRQHandler, // PIO3_0 Wakeup
+ WAKEUP_IRQHandler, // PIO3_1 Wakeup
+ WAKEUP_IRQHandler, // PIO3_2 Wakeup
+ WAKEUP_IRQHandler, // PIO3_3 Wakeup
+
+ // Specific peripheral irq handlers
+ I2C_IRQHandler, // I2C0
+ TIMER16_0_IRQHandler, // CT16B0 (16-bit Timer 0)
+ TIMER16_1_IRQHandler, // CT16B1 (16-bit Timer 1)
+ TIMER32_0_IRQHandler, // CT32B0 (32-bit Timer 0)
+ TIMER32_1_IRQHandler, // CT32B1 (32-bit Timer 1)
+ SSP_IRQHandler, // SSP0
+ UART_IRQHandler, // UART0
+ USB_IRQHandler, // USB IRQ
+ USB_FIQHandler, // USB FIQ
+ ADC_IRQHandler, // ADC (A/D Converter)
+ WDT_IRQHandler, // WDT (Watchdog Timer)
+ BOD_IRQHandler, // BOD (Brownout Detect)
+ FMC_IRQHandler, // Flash (IP2111 Flash Memory Controller)
+ PIOINT3_IRQHandler, // PIO INT3
+ PIOINT2_IRQHandler, // PIO INT2
+ PIOINT1_IRQHandler, // PIO INT1
+ PIOINT0_IRQHandler, // PIO INT0
+};
+
+/******************************************************************************
+ * References
+ * [1] http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html
+ * [2] http://gcc.gnu.org/onlinedocs/gcc/Variable-Attributes.html
+ * [3] http://www.arm.com/files/pdf/Cortex-M3_programming_for_ARM7_developers.pdf
+ * [4] http://fun-tech.se/stm32/OlimexBlinky/mini.php
+ *****************************************************************************/
+
--- /dev/null
+/*
+ * Software License Agreement (BSD License)
+ *
+ * Copyright (c) 2010, Roel Verdult
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+// These are defined and created by the linker, locating them in memory
+extern unsigned char _etext;
+extern unsigned char _data;
+extern unsigned char _edata;
+extern unsigned char _bss;
+extern unsigned char _ebss;
+
+// Prototype the required startup functions
+extern void main(void);
+
+// The entry point of the application, prepare segments,
+// initialize the cpu and execute main()
+void boot_entry(void)
+{
+ register unsigned char *src, *dst;
+
+ // Get physical data address and copy it to sram
+ src = &_etext;
+ dst = &_data;
+ while(dst < &_edata) {
+ *dst++ = *src++;
+ }
+
+ // Clear the bss segment
+ dst = &_bss;
+ while(dst < &_ebss) {
+ *dst++ = 0;
+ }
+
+ // Execute the code at the program entry point
+ main();
+
+ // Do nothing when returned from main, just keep looping
+ while(1);
+}
--- /dev/null
+/*
+ * Software License Agreement (BSD License)
+ *
+ * Copyright (c) 2010, Roel Verdult
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+sram_top = ORIGIN(sram) + LENGTH(sram);
+ENTRY(boot_entry)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.irq_vectors))
+ *(.text*)
+ *(.rodata*)
+ } > flash
+
+ /*
+ * More information about Special Section Indexes is available in the
+ * free "ELF for the ARM Architecture" document from ARM Limited
+ * http://infocenter.arm.com/help/topic/com.arm.doc.ihi0044d/IHI0044D_aaelf.pdf
+ *
+ */
+ .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } > flash
+ __exidx_start = .;
+ .ARM.exidx : { *(.ARM.exidx* .gnu.linkonce.armexidx.*) } > flash
+ __exidx_end = .;
+
+ _etext = .;
+
+ .data : AT (__exidx_end)
+ {
+ _data = .;
+ *(vtable)
+ *(.data*)
+ _edata = .;
+ } > sram
+
+ /* zero initialized data */
+ .bss :
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ _ebss = .;
+ } > sram
+
+ end = .;
+
+ /* For GDB compatibility we decrease the top with 16 bytes */
+ stack_entry = sram_top - 16;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "drivers/sensors/pn532/pn532.h"
+#include "drivers/sensors/pn532/pn532_drvr.h"
+
+/**************************************************************************/
+/*!
+ Main program entry point. After reset, normal code execution will
+ begin here.
+
+ Note: CFG_INTERFACE is normally enabled by default. If you wish to
+ enable the blinking LED code in main, you will need to open
+ projectconfig.h, comment out "#define CFG_INTERFACE" and
+ rebuild the project.
+*/
+/**************************************************************************/
+int main (void)
+{
+ #ifdef CFG_INTERFACE
+ //#error "CFG_INTERFACE must be disabled in projectconfig.h for this demo"
+ #endif
+ #if !defined CFG_PRINTF_USBCDC
+ #error "CFG_PRINTF_USBCDC must be enabled in projectconfig.h for this demo"
+ #endif
+
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ // Wait 5 second for someone to open the USB connection for printf
+ systickDelay(5000);
+
+ // Initialise the PN532
+ pn532Init();
+
+ byte_t response[256];
+ size_t responseLen;
+ pn532_error_t error;
+
+ // Setup command to initialise a single ISO14443A target at 106kbps
+ byte_t abtCommand[] = { PN532_COMMAND_INLISTPASSIVETARGET, 0x01, PN532_MODULATION_ISO14443A_106KBPS };
+
+ while (1)
+ {
+ printf("%s", CFG_PRINTF_NEWLINE);
+ printf("Wait for an ISO14443A card (Mifare Classic, etc.)%s", CFG_PRINTF_NEWLINE);
+
+ // Send the command
+ error = pn532Write(abtCommand, sizeof(abtCommand));
+
+ // Wait until we get a response or an unexpected error message
+ do
+ {
+ error = pn532Read(response, &responseLen);
+ systickDelay(25);
+ }
+ #ifdef PN532_UART
+ while (error == PN532_ERROR_RESPONSEBUFFEREMPTY);
+ #endif
+ #ifdef PN532_SPI
+ while ((error == PN532_ERROR_RESPONSEBUFFEREMPTY) || (error = PN532_ERROR_SPIREADYSTATUSTIMEOUT));
+ #endif
+
+ // Print the card details if possible
+ if (!error)
+ {
+ /* Response for ISO14443A 106KBPS (Mifare Classic, etc.)
+ See UM0701-02 section 7.3.5 for more information
+
+ byte Description
+ ------------- ------------------------------------------
+ b7 Tags Found
+ b8 Tag Number (only one used in this example)
+ b9..10 SENS_RES
+ b11 SEL_RES
+ b12 NFCID Length
+ b13..NFCIDLen NFCID
+
+ SENS_RES SEL_RES Manufacturer/Card Type NFCID Len
+ -------- ------- ----------------------- ---------
+ 00 04 08 NXP Mifare Classic 1K 4 bytes */
+
+ printf("%s", CFG_PRINTF_NEWLINE);
+ printf("%-12s: %d %s", "Tags Found", response[7], CFG_PRINTF_NEWLINE);
+ printf("%-12s: %02X %02X %s", "SENS_RES", response[9], response[10], CFG_PRINTF_NEWLINE);
+ printf("%-12s: %02X %s", "SEL_RES", response[11], CFG_PRINTF_NEWLINE);
+ printf("%-12s: ", "NFCID");
+ size_t pos;
+ for (pos=0; pos < response[12]; pos++)
+ {
+ printf("%02x ", response[13 + pos]);
+ }
+ printf(CFG_PRINTF_NEWLINE);
+ }
+ else
+ {
+ // Oops .... something bad happened. Check 'error'
+ printf("Ooops! Error %02X %s", error, CFG_PRINTF_NEWLINE);
+ }
+
+ // Wait at least one second before trying again
+ systickDelay(1000);
+ }
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_tbl.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef __CMD_TBL_H__
+#define __CMD_TBL_H__
+
+#define CMD_COUNT (sizeof(cmd_tbl)/sizeof(cmd_t))
+
+#include <stdio.h>
+
+#ifdef CFG_INTERFACE_UART
+#include "core/uart/uart.h"
+#endif
+
+// Function prototypes for the command table
+void cmd_help(uint8_t argc, char **argv); // handled by core/cmd/cmd.c
+void cmd_sysinfo(uint8_t argc, char **argv);
+
+#ifdef CFG_TFTLCD
+void cmd_button(uint8_t argc, char **argv);
+void cmd_circle(uint8_t argc, char **argv);
+void cmd_clear(uint8_t argc, char **argv);
+void cmd_line(uint8_t argc, char **argv);
+void cmd_rectangle(uint8_t argc, char **argv);
+void cmd_pixel(uint8_t argc, char **argv);
+void cmd_progress(uint8_t argc, char **argv);
+void cmd_getpixel(uint8_t argc, char **argv);
+void cmd_gettext(uint8_t argc, char **argv);
+void cmd_calibrate(uint8_t argc, char **argv);
+void cmd_orientation(uint8_t argc, char **argv);
+void cmd_text(uint8_t argc, char **argv);
+void cmd_textw(uint8_t argc, char **argv);
+void cmd_tsthreshhold(uint8_t argc, char **argv);
+void cmd_tswait(uint8_t argc, char **argv);
+#ifdef CFG_SDCARD
+void cmd_bmp(uint8_t argc, char **argv);
+#endif
+#endif
+
+#ifdef CFG_CHIBI
+void cmd_chibi_addr(uint8_t argc, char **argv);
+void cmd_chibi_tx(uint8_t argc, char **argv);
+#endif
+
+#ifdef CFG_I2CEEPROM
+void cmd_i2ceeprom_read(uint8_t argc, char **argv);
+void cmd_i2ceeprom_write(uint8_t argc, char **argv);
+void cmd_uart(uint8_t argc, char **argv);
+#endif
+
+#ifdef CFG_LM75B
+void cmd_lm75b_gettemp(uint8_t argc, char **argv);
+#endif
+
+#ifdef CFG_SDCARD
+void cmd_sd_dir(uint8_t argc, char **argv);
+#endif
+
+#define CMD_NOPARAMS "This command has no parameters"
+
+/**************************************************************************/
+/*!
+ Command list for the command-line interpreter and the name of the
+ corresponding method that handles the command.
+
+ Note that a trailing ',' is required on the last entry, which will
+ cause a NULL entry to be appended to the end of the table.
+*/
+/**************************************************************************/
+cmd_t cmd_tbl[] =
+{
+ // command name, min args, max args, hidden, function name, command description, syntax
+ { "?", 0, 0, 0, cmd_help , "Help" , CMD_NOPARAMS },
+ { "V", 0, 0, 0, cmd_sysinfo , "System Info" , CMD_NOPARAMS },
+
+ #ifdef CFG_I2CEEPROM
+ { "e", 1, 1, 0, cmd_i2ceeprom_read , "EEPROM Read" , "'e <addr>'" },
+ { "w", 2, 2, 0, cmd_i2ceeprom_write , "EEPROM Write" , "'w <addr> <val>'" },
+ { "U", 0, 1, 0, cmd_uart , "UART baud rate" , "'U [<val>]'" },
+ #endif
+
+ #ifdef CFG_TFTLCD
+ { "b", 7, 99, 0, cmd_button , "Button" , "'b <x> <y> <w> <h> <brdrclr> <fillclr> <fontclr> [<txt>]'" },
+ #ifdef CFG_SDCARD
+ { "B", 3, 3, 0, cmd_bmp , "Bitmap (SD Card)" , "'B <x> <y> <file>'" },
+ #endif
+ { "c", 4, 6, 0, cmd_circle , "Circle" , "'c <x> <y> <radius> <color> [<filled[0|1]> <bcolor>]'" },
+ { "C", 0, 0, 0, cmd_calibrate , "Calibrate Touch Screen" , CMD_NOPARAMS },
+ { "F", 0, 1, 0, cmd_clear , "Fill" , "'F [<color>]'" },
+ { "l", 5, 7, 0, cmd_line , "Line" , "'l <x1> <y1> <x2> <y2> <color> [<empty> <solid>]'" },
+ { "o", 0, 1, 0, cmd_orientation , "LCD Orientation" , "'o [<0|1>]'" },
+ { "p", 3, 3, 0, cmd_pixel , "Draw Pixel" , "'p <x> <y> <color>'" },
+ { "P", 9, 9, 0, cmd_progress , "Progress Bar" , "'P <x> <y> <w> <h> <%> <bclr> <bfillclr> <pbrdclr> <pfillclr>'" },
+ { "r", 5, 7, 0, cmd_rectangle , "Rectangle" , "'r <x1> <y1> <x2> <y2> <color> [<filled[0|1]> <bcolor>]'" },
+ { "R", 2, 2, 0, cmd_getpixel , "Read Pixel" , "'R <x> <y>'" },
+ { "s", 2, 99, 0, cmd_textw , "Text Width" , "'s <font#> <msg>'" },
+ { "t", 5, 99, 0, cmd_text , "Text" , "'t <x> <y> <color> <font#> <msg>'" },
+ { "T", 0, 0, 0, cmd_gettext , "Text Dialogue" , CMD_NOPARAMS },
+ { "W", 0, 1, 0, cmd_tswait , "Wait for Touch" , "'W [<ms>]'" },
+ { "x", 0, 1, 0, cmd_tsthreshhold , "Touch Threshold" , "'x [<0..254>]'" },
+ #endif
+
+ #ifdef CFG_CHIBI
+ { "A", 0, 1, 0, cmd_chibi_addr , "Get/Set Node Address" , "'A [<0x0..0xFFFE>]'" },
+ { "S", 2, 99, 0, cmd_chibi_tx , "Send Message" , "'S <destaddr> <msg>'" },
+ #endif
+
+ #ifdef CFG_LM75B
+ { "m", 0, 0, 0, cmd_lm75b_gettemp , "Temp (C)" , CMD_NOPARAMS },
+ #endif
+
+ #ifdef CFG_SDCARD
+ { "d", 0, 1, 0, cmd_sd_dir , "Dir (SD Card)" , "'d [<path>]'" },
+ #endif
+};
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file commands.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Common helper-functions for all commands in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include <stdio.h>
+#include <string.h> // memset
+#include <ctype.h> // isdigit, isspace, etc.
+
+#include "core/cmd/cmd.h"
+#include "commands.h"
+
+/**************************************************************************/
+/*!
+ @brief Attempts to convert the supplied decimal or hexadecimal
+ string to the matching 32-bit value. All hexadecimal values
+ must be preceded by either '0x' or '0X' to be properly parsed.
+
+ @param[in] s
+ Input string
+ @param[out] result
+ Signed 32-bit integer to hold the conversion results
+
+ @section Example
+
+ @code
+ char *hex = "0xABCD";
+ char *dec = "1234";
+
+ // Convert supplied values to integers
+ int32_t hexValue, decValue;
+ getNumber (hex, &hexValue);
+ getNumber (dec, &decValue);
+
+ @endcode
+*/
+/**************************************************************************/
+int getNumber (char *s, int32_t *result)
+{
+ int32_t value;
+ uint32_t mustBeHex = FALSE;
+ uint32_t sgn = 1;
+ const unsigned char hexToDec [] = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 255, 255, 255, 255, 255, 255, 255, 10, 11, 12, 13, 14, 15};
+
+ if (!s)
+ return 0;
+
+ // Check if this is a hexadecimal value
+ if ((strlen (s) > 2) && (!strncmp (s, "0x", 2) || !strncmp (s, "0X", 2)))
+ {
+ mustBeHex = TRUE;
+ s += 2;
+ }
+
+ // Check for negative sign
+ if (!mustBeHex && *s && (*s == '-'))
+ {
+ sgn = -1;
+ s++;
+ }
+
+ // Try to convert value
+ for (value = 0; *s; s++)
+ {
+ if (mustBeHex && isxdigit ((uint8_t)*s))
+ value = (value << 4) | hexToDec [toupper((uint8_t)*s) - '0'];
+ else if (isdigit ((uint8_t)*s))
+ value = (value * 10) + ((uint8_t)*s - '0');
+ else
+ {
+ printf ("Malformed number. Must be decimal number, or hex value preceeded by '0x'%s", CFG_PRINTF_NEWLINE);
+ return 0;
+ }
+ }
+
+ // Set number to negative value if required
+ if (!mustBeHex)
+ value *= sgn;
+
+ *result = value;
+
+ return 1;
+}
+
+
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file commands.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#ifndef __COMMANDS_H__
+#define __COMMANDS_H__
+
+#include "projectconfig.h"
+
+// Method Prototypes
+int getNumber (char *s, int32_t *result);
+
+#endif
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_chibi_addr.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_chibi_addr in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_CHIBI
+ #include "drivers/chibi/chb.h"
+ #include "drivers/chibi/chb_drvr.h"
+
+/**************************************************************************/
+/*!
+ Gets or sets the 16-bit sensor node address. This value can be
+ anything between 1-65534 (0x0001-0xFFFE), and in decimal or
+ hexadecimal notation. All hexadecimal values must be preceded by
+ '0x' or '0X' to be properly interpreted (ex. 0x009F).
+*/
+/**************************************************************************/
+void cmd_chibi_addr(uint8_t argc, char **argv)
+{
+ if (argc > 0)
+ {
+ // Try to convert supplied value to an integer
+ int32_t addr;
+ getNumber (argv[0], &addr);
+
+ // Check for invalid values (getNumber may complain about this as well)
+ if (addr <= 0 || addr > 0xFFFF)
+ {
+ printf("Invalid Address: 1-65534 or 0x0001-0xFFFE required.%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+ if (addr == 0xFFFF)
+ {
+ printf("Invalid Address: 0xFFFF reserved for broadcast.%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Write address to EEPROM and update peripheral control block
+ chb_set_short_addr((uint16_t)addr);
+ chb_pcb_t *pcb = chb_get_pcb();
+ printf("Address set to: 0x%04X%s", pcb->src_addr, CFG_PRINTF_NEWLINE);
+ }
+ else
+ {
+ // Display the current address
+ chb_pcb_t *pcb = chb_get_pcb();
+ printf("0x%04X%s", pcb->src_addr, CFG_PRINTF_NEWLINE);
+ }
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_chibi_tx.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_chibi_tx in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_CHIBI
+ #include "drivers/chibi/chb.h"
+ #include "drivers/chibi/chb_drvr.h"
+
+/**************************************************************************/
+/*!
+ Sends text or data via Chibi
+
+*/
+/**************************************************************************/
+void cmd_chibi_tx(uint8_t argc, char **argv)
+{
+ uint8_t i, len, *data_ptr, data[50];
+ uint16_t addr;
+
+ // Try to convert supplied address to an integer
+ int32_t addr32;
+ getNumber (argv[0], &addr32);
+
+ // Check for invalid values (getNumber may complain about this as well)
+ if (addr32 <= 0 || addr32 > 0xFFFF)
+ {
+ printf("Invalid Address: 1-65534 or 0x0001-0xFFFE required.%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Address seems to be OK
+ addr = (uint16_t)addr32;
+
+ // Get message contents
+ data_ptr = data;
+ for (i=0; i<argc-1; i++)
+ {
+ len = strlen(argv[i+1]);
+ strcpy((char *)data_ptr, (char *)argv[i+1]);
+ data_ptr += len;
+ *data_ptr++ = ' ';
+ }
+ *data_ptr++ = '\0';
+
+ // Send message
+ chb_write(addr, data, data_ptr - data);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_i2ceeprom_read.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_i2ceeprom_read in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_I2CEEPROM
+ #include "drivers/eeprom/eeprom.h"
+
+/**************************************************************************/
+/*!
+ Reads a single byte at the supplied EEPROM address
+*/
+/**************************************************************************/
+void cmd_i2ceeprom_read(uint8_t argc, char **argv)
+{
+ uint16_t addr;
+ uint8_t value;
+
+ // Try to convert supplied address to an integer
+ int32_t addr32;
+ getNumber (argv[0], &addr32);
+
+ // Check for invalid values (getNumber may complain about this as well)
+ if (addr32 < 0 || eepromCheckAddress(addr32))
+ {
+ printf("Address out of range %s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Address seems to be OK
+ addr = (uint16_t)addr32;
+ value = eepromReadU8(addr);
+
+ printf("0x%02X%s", value, CFG_PRINTF_NEWLINE);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_i2ceeprom_write.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_i2ceeprom_write in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_I2CEEPROM
+ #include "drivers/eeprom/eeprom.h"
+
+/**************************************************************************/
+/*!
+ Writes a single byte at the supplied EEPROM address
+*/
+/**************************************************************************/
+void cmd_i2ceeprom_write(uint8_t argc, char **argv)
+{
+ uint16_t addr;
+ uint8_t val;
+
+ // Try to convert supplied address to an integer
+ int32_t addr32;
+ getNumber (argv[0], &addr32);
+
+ // Check for invalid values (getNumber may complain about this as well)
+ if (addr32 < 0 || eepromCheckAddress(addr32))
+ {
+ printf("Address out of range %s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Address seems to be OK
+ addr = (uint16_t)addr32;
+
+ // Make sure this isn't in the reserved system config space
+ if (addr <= CFG_EEPROM_RESERVED)
+ {
+ printf("ERROR: Reserved address (0x%04X-0x%04X)%s", 0, CFG_EEPROM_RESERVED, CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Try to convert supplied data to an integer
+ int32_t val32;
+ getNumber (argv[1], &val32);
+
+ // Check for invalid values (getNumber may complain about this as well)
+ if (val32 < 0 || val32 > 0xFF)
+ {
+ printf("Invalid Data: 0-255 or 0x00-0xFF required.%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Data seems to be OK
+ val = (uint8_t)val32;
+
+ // Write data at supplied address
+ eepromWriteU8(addr, val);
+
+ // Write successful
+ printf("0x%02X written at 0x%04X%s", val, addr, CFG_PRINTF_NEWLINE);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_lm75b_gettemp.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_lm75b_gettemp in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_LM75B
+ #include "drivers/sensors/lm75b/lm75b.h"
+
+/**************************************************************************/
+/*!
+ Gets the current temperature in degrees celsius from the LM75B
+*/
+/**************************************************************************/
+void cmd_lm75b_gettemp(uint8_t argc, char **argv)
+{
+ int32_t temp = 0;
+
+ // Get the current temperature (in 0.125°C units)
+ lm75bGetTemperature(&temp);
+
+ // Multiply value by 125 for fixed-point math (0.125°C per unit)
+ temp *= 125;
+
+ // Use modulus operator to display decimal value
+ printf("%d.%d C%s", temp / 1000, temp % 1000, CFG_PRINTF_NEWLINE);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_sd_dir.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_sd_dir in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_SDCARD
+ #include "core/timer32/timer32.h"
+ #include "core/ssp/ssp.h"
+ #include "drivers/fatfs/diskio.h"
+ #include "drivers/fatfs/ff.h"
+
+ static FILINFO Finfo;
+ static FATFS Fatfs[1];
+
+/**************************************************************************/
+/*!
+ sd 'dir' command handler
+
+ This demonstrates how to initialise the SD card, read the contents
+ of a directory (including checking if an entry is a folder or a file),
+ and checking the amount of freespace on available on the disk.
+*/
+/**************************************************************************/
+void cmd_sd_dir(uint8_t argc, char **argv)
+{
+ char* path;
+
+ // Display root folder by default
+ path = argc > 0 ? argv[0] : "/";
+
+ // Initialise SD Card
+ DSTATUS stat;
+ stat = disk_initialize(0);
+ if (stat & STA_NOINIT)
+ {
+ printf("SD init failed%s", CFG_PRINTF_NEWLINE);
+ }
+ if (stat & STA_NODISK)
+ {
+ printf("No SD card%s", CFG_PRINTF_NEWLINE);
+ }
+ if (stat == 0)
+ {
+ BYTE res;
+ DIR dir;
+
+ // Try to mount drive
+ res = f_mount(0, &Fatfs[0]);
+ if (res != FR_OK)
+ {
+ printf("Failed to mount partition%s" , CFG_PRINTF_NEWLINE);
+ }
+ if (res == FR_OK)
+ {
+ res = f_opendir(&dir, path);
+ if (res)
+ {
+ printf("Failed to open '%s' %s", path, CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Display directory name
+ printf("%s Contents of %s %s%s", CFG_PRINTF_NEWLINE, path, CFG_PRINTF_NEWLINE, CFG_PRINTF_NEWLINE);
+ printf(" %-25s %12s %s", "Filename", "Size", CFG_PRINTF_NEWLINE);
+ printf(" %-25s %12s %s", "--------", "----", CFG_PRINTF_NEWLINE);
+
+ // Read directory contents
+ int folderBytes = 0;
+ for(;;)
+ {
+ res = f_readdir(&dir, &Finfo);
+ if ((res != FR_OK) || !Finfo.fname[0]) break;
+ #if _USE_LFN == 0
+ if (Finfo.fattrib & AM_DIR)
+ printf(" <DIR> %-25s %s", (char *)&Finfo.fname[0], CFG_PRINTF_NEWLINE);
+ else
+ printf(" %-25s %12d Bytes %s", (char *)&Finfo.fname[0], (int)(Finfo.fsize), CFG_PRINTF_NEWLINE);
+ folderBytes += Finfo.fsize;
+ #else
+ // ToDo
+ #endif
+ }
+
+ // Display folder size
+ printf("%s", CFG_PRINTF_NEWLINE);
+ printf(" %-25s %12d KB %s", "Folder Size: ", (int)(folderBytes / 1024), CFG_PRINTF_NEWLINE);
+
+ // Get free disk space (only available if FATFS was compiled with _FS_MINIMIZE set to 0)
+ #if _FS_MINIMIZE == 0 && _FS_READONLY == 0
+ FATFS *fs = &Fatfs[0];
+ DWORD clust;
+
+ // Get free clusters
+ res = f_getfree("0:", &clust, &fs);
+
+ // Display total and free space
+ printf(" %-25s %12d KB %s", "Disk Size: ", (int)((DWORD)(fs->max_clust - 2) * fs->csize / 2), CFG_PRINTF_NEWLINE);
+ printf(" %-25s %12d KB %s", "Space Available: ", (int)(clust * fs->csize / 2), CFG_PRINTF_NEWLINE);
+ #endif
+ }
+ }
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_sysinfo.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_sysinfo in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "core/systick/systick.h"
+#include "core/iap/iap.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_CHIBI
+ #include "drivers/chibi/chb.h"
+ #include "drivers/chibi/chb_drvr.h"
+#endif
+
+#ifdef CFG_PRINTF_UART
+ #include "core/uart/uart.h"
+#endif
+
+#ifdef CFG_LM75B
+ #include "drivers/sensors/lm75b/lm75b.h"
+#endif
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+#endif
+
+#ifdef CFG_SDCARD
+ #include "core/gpio/gpio.h"
+#endif
+
+/**************************************************************************/
+/*!
+ 'sysinfo' command handler
+*/
+/**************************************************************************/
+void cmd_sysinfo(uint8_t argc, char **argv)
+{
+ IAP_return_t iap_return;
+
+ printf("%-25s : %d.%d MHz %s", "System Clock", CFG_CPU_CCLK / 1000000, CFG_CPU_CCLK % 1000000, CFG_PRINTF_NEWLINE);
+ printf("%-25s : v%d.%d.%d %s", "Firmware", CFG_FIRMWARE_VERSION_MAJOR, CFG_FIRMWARE_VERSION_MINOR, CFG_FIRMWARE_VERSION_REVISION, CFG_PRINTF_NEWLINE);
+
+ // 128-bit MCU Serial Number
+ iap_return = iapReadSerialNumber();
+ if(iap_return.ReturnCode == 0)
+ {
+ printf("%-25s : %08X %08X %08X %08X %s", "Serial Number", iap_return.Result[0],iap_return.Result[1],iap_return.Result[2],iap_return.Result[3], CFG_PRINTF_NEWLINE);
+ }
+
+ // CLI and buffer Settings
+ #ifdef CFG_INTERFACE
+ printf("%-25s : %d bytes %s", "Max CLI Command", CFG_INTERFACE_MAXMSGSIZE, CFG_PRINTF_NEWLINE);
+ #endif
+
+ #ifdef CFG_PRINTF_UART
+ uart_pcb_t *pcb = uartGetPCB();
+ printf("%-25s : %d %s", "UART Baud Rate", pcb->baudrate, CFG_PRINTF_NEWLINE);
+ #endif
+
+ // TFT LCD Settings (if CFG_TFTLCD enabled)
+ #ifdef CFG_TFTLCD
+ printf("%-25s : %d %s", "LCD Width", (int)lcdGetWidth(), CFG_PRINTF_NEWLINE);
+ printf("%-25s : %d %s", "LCD Height", (int)lcdGetHeight(), CFG_PRINTF_NEWLINE);
+ #endif
+
+ // Wireless Settings (if CFG_CHIBI enabled)
+ #ifdef CFG_CHIBI
+ chb_pcb_t *pcb = chb_get_pcb();
+ printf("%-25s : %s %s", "Wireless", "AT86RF212", CFG_PRINTF_NEWLINE);
+ printf("%-25s : 0x%04X %s", "802.15.4 PAN ID", CFG_CHIBI_PANID, CFG_PRINTF_NEWLINE);
+ printf("%-25s : 0x%04X %s", "802.15.4 Node Address", pcb->src_addr, CFG_PRINTF_NEWLINE);
+ printf("%-25s : %d %s", "802.15.4 Channel", CFG_CHIBI_CHANNEL, CFG_PRINTF_NEWLINE);
+ #endif
+
+ // System Uptime (based on systick timer)
+ printf("%-25s : %u s %s", "System Uptime", (unsigned int)systickGetSecondsActive(), CFG_PRINTF_NEWLINE);
+
+ // System Temperature (if LM75B Present)
+ #ifdef CFG_LM75B
+ int32_t temp = 0;
+ lm75bGetTemperature(&temp);
+ temp *= 125;
+ printf("%-25s : %d.%d C %s", "Temperature", temp / 1000, temp % 1000, CFG_PRINTF_NEWLINE);
+ #endif
+
+ #ifdef CFG_SDCARD
+ printf("%-25s : %s %s", "SD Card Present", gpioGetValue(CFG_SDCARD_CDPORT, CFG_SDCARD_CDPIN) ? "True" : "False", CFG_PRINTF_NEWLINE);
+ #endif
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_uart.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_uart in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_I2CEEPROM
+ #include "drivers/eeprom/eeprom.h"
+ #include "core/uart/uart.h"
+
+/**************************************************************************/
+/*!
+ Gets or sets the UART speed from EEPROM.
+*/
+/**************************************************************************/
+void cmd_uart(uint8_t argc, char **argv)
+{
+ if (argc > 0)
+ {
+ // Try to convert supplied value to an integer
+ int32_t speed;
+ getNumber (argv[0], &speed);
+
+ // Check for invalid values (getNumber may complain about this as well)
+ if (speed < 9600 || speed > 115200)
+ {
+ printf("Invalid baud rate: 9600-115200 required.%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Write baud rate to EEPROM and reinitialise UART if using it
+ printf("Setting UART to: %d%s", (int)speed, CFG_PRINTF_NEWLINE);
+ eepromWriteU32(CFG_EEPROM_UART_SPEED, speed);
+ #ifdef CFG_PRINTF_UART
+ uartInit(speed);
+ #endif
+ }
+ else
+ {
+ // Display the current baud rate
+ #ifdef CFG_PRINTF_UART
+ uart_pcb_t *pcb = uartGetPCB();
+ printf("%d%s", pcb->baudrate, CFG_PRINTF_NEWLINE);
+ #else
+ printf("UART not initialised (using USBCDC)%s", CFG_PRINTF_NEWLINE);
+ #endif
+ }
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_bmp.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_bmp in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#if defined CFG_TFTLCD && defined CFG_SDCARD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+
+/**************************************************************************/
+/*!
+ Displays a bitmap image on the LCD.
+*/
+/**************************************************************************/
+void cmd_bmp(uint8_t argc, char **argv)
+{
+ int32_t x, y;
+ char* filename;
+
+ // Convert supplied parameters
+ getNumber (argv[0], &x);
+ getNumber (argv[1], &y);
+ filename = argv[2];
+
+ // Render image
+ bmp_error_t error;
+ error = drawBitmapImage(x, y, filename);
+
+ switch (error)
+ {
+ case BMP_ERROR_SDINITFAIL:
+ printf("SD Init Failed%s", CFG_PRINTF_NEWLINE);
+ break;
+ case BMP_ERROR_FILENOTFOUND:
+ printf("File Not Found: '%s'%s", filename, CFG_PRINTF_NEWLINE);
+ break;
+ case BMP_ERROR_UNABLETOCREATEFILE:
+ printf("Unable to create file: '%s'%s", filename, CFG_PRINTF_NEWLINE);
+ break;
+ case BMP_ERROR_NOTABITMAP:
+ printf("Not a Bitmap: '%s'%s", filename, CFG_PRINTF_NEWLINE);
+ break;
+ case BMP_ERROR_INVALIDBITDEPTH:
+ printf("Not a 24-Bit Image%s", CFG_PRINTF_NEWLINE);
+ break;
+ case BMP_ERROR_INVALIDDIMENSIONS:
+ printf("Image Exceeds %d x %d Pixels%s", lcdGetWidth(), lcdGetHeight(), CFG_PRINTF_NEWLINE);
+ break;
+ case BMP_ERROR_COMPRESSEDDATA:
+ printf("Compressed Images Unsupported%s", CFG_PRINTF_NEWLINE);
+ break;
+ case BMP_ERROR_PREMATUREEOF:
+ printf("Premature EOF%s", CFG_PRINTF_NEWLINE);
+ break;
+ case BMP_ERROR_NONE:
+ break;
+ }
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_buton.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_button in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+ #include "drivers/lcd/tft/touchscreen.h"
+ #include "drivers/lcd/tft/fonts/dejavusans9.h"
+
+/**************************************************************************/
+/*!
+ Displays a button on the LCD with or without text.
+
+ Ex.: "btn 10 10 220 35 1 This is a test" will display a 220x35 pixel
+ button in the 'pressed' state (arg 5 = 1) starting at pixel 10, 10 with
+ 'This is a test' rendered on the button.
+*/
+/**************************************************************************/
+void cmd_button(uint8_t argc, char **argv)
+{
+ int32_t x, y, w, h, border, fill, font;
+
+ // ToDo: Validate data!
+
+ // Convert supplied parameters
+ getNumber (argv[0], &x);
+ getNumber (argv[1], &y);
+ getNumber (argv[2], &w);
+ getNumber (argv[3], &h);
+ getNumber (argv[4], &border);
+ getNumber (argv[5], &fill);
+ getNumber (argv[6], &font);
+
+ if (argc == 7)
+ {
+ // Render the button with no text
+ drawButton(x, y, w, h, &dejaVuSans9ptFontInfo, 7, (uint16_t)border, (uint16_t)fill, (uint16_t)font, NULL);
+ }
+ else
+ {
+ // Get text contents
+ uint8_t i, len, *data_ptr, data[50];
+ data_ptr = data;
+ for (i = 0; i < argc - 7; i++)
+ {
+ len = strlen(argv[i + 7]);
+ strcpy((char *)data_ptr, (char *)argv[i + 7]);
+ data_ptr += len;
+ *data_ptr++ = ' ';
+ }
+ *data_ptr++ = '\0';
+
+ // Render the button with text
+ drawButton(x, y, w, h, &dejaVuSans9ptFontInfo, 7, (uint16_t)border, (uint16_t)fill, (uint16_t)font, (char *)&data);
+ }
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_calibrate.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_calibrate in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#if defined CFG_TFTLCD
+ #include "drivers/lcd/tft/touchscreen.h"
+
+/**************************************************************************/
+/*!
+ Starts the touch-screen calibration process.
+*/
+/**************************************************************************/
+void cmd_calibrate(uint8_t argc, char **argv)
+{
+ printf("Starting touch-screen calibration%s", CFG_PRINTF_NEWLINE);
+
+ // Run through the calibration process
+ tsCalibrate();
+
+ printf("Calibration complete%s", CFG_PRINTF_NEWLINE);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_circle.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_circle in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+
+/**************************************************************************/
+/*!
+ Displays a circle on the LCD.
+*/
+/**************************************************************************/
+void cmd_circle(uint8_t argc, char **argv)
+{
+ int32_t x, y, r, c, filled, border;
+ filled = 0;
+
+ // Convert supplied parameters
+ getNumber (argv[0], &x);
+ getNumber (argv[1], &y);
+ getNumber (argv[2], &r);
+ getNumber (argv[3], &c);
+ if (argc >= 5)
+ {
+ getNumber (argv[4], &filled);
+ }
+ if (argc == 6)
+ {
+ getNumber (argv[5], &border);
+ if (border < 0 || border > 0xFFFF)
+ {
+ printf("Invalid Border Color%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+ }
+
+ // ToDo: Validate data!
+ if (c < 0 || c > 0xFFFF)
+ {
+ printf("Invalid Color%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+ if (r < 1)
+ {
+ printf("Invalid Radius%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ if (filled)
+ drawCircleFilled(x, y, r, (uint16_t)c);
+ else
+ drawCircle(x, y, r, (uint16_t)c);
+
+ // Draw border if requested
+ if (argc == 6)
+ {
+ drawCircle(x, y, r, (uint16_t)border);
+ }
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_clear.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_clear in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+
+/**************************************************************************/
+/*!
+ Fills the LCD with the supplied RGB565 color
+*/
+/**************************************************************************/
+void cmd_clear(uint8_t argc, char **argv)
+{
+ int32_t col = 0;
+ if (argc > 0)
+ {
+ // Try to convert supplied value to an integer
+ getNumber (argv[0], &col);
+
+ // Check for invalid values (getNumber may complain about this as well)
+ if (col < 0 || col > 0xFFFF)
+ {
+ printf("Invalid Color%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+ }
+
+ // Fill the screen
+ drawFill((uint16_t)col);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_gettext.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_gettext in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#if defined CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+ #include "drivers/lcd/tft/touchscreen.h"
+ #include "drivers/lcd/tft/dialogues/alphanumeric.h"
+
+/**************************************************************************/
+/*!
+ Displays an alpha-numeric input dialogue on the TFT LCD screen.
+*/
+/**************************************************************************/
+void cmd_gettext(uint8_t argc, char **argv)
+{
+ // Print results from an alpha-numeric dialogue
+ char* results = alphaShowDialogue();
+ drawFill(COLOR_BLACK);
+ printf("%s%s", results, CFG_PRINTF_NEWLINE);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_line.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_line in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+
+/**************************************************************************/
+/*!
+ Displays a line on the LCD.
+*/
+/**************************************************************************/
+void cmd_line(uint8_t argc, char **argv)
+{
+ int32_t x1, y1, x2, y2, c, empty, solid;
+
+ // Convert supplied parameters
+ getNumber (argv[0], &x1);
+ getNumber (argv[1], &y1);
+ getNumber (argv[2], &x2);
+ getNumber (argv[3], &y2);
+ getNumber (argv[4], &c);
+ if (argc > 5)
+ {
+ getNumber (argv[5], &empty);
+ getNumber (argv[6], &solid);
+ }
+ else
+ {
+ empty = 0;
+ solid = 1;
+ }
+
+ // ToDo: Validate data!
+ if (c < 0 || c > 0xFFFF)
+ {
+ printf("Invalid Color%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ drawLineDotted(x1, y1, x2, y2, empty, solid, (uint16_t)c);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_orientation.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_orientation in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+
+/**************************************************************************/
+/*!
+ Changes the LCD orientation
+*/
+/**************************************************************************/
+void cmd_orientation(uint8_t argc, char **argv)
+{
+ int32_t value;
+
+ if (argc == 0)
+ {
+ printf("%d%s", lcdGetOrientation(), CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Convert supplied parameters
+ getNumber (argv[0], &value);
+
+ switch (value)
+ {
+ case 0:
+ lcdSetOrientation(LCD_ORIENTATION_PORTRAIT);
+ break;
+ case 1:
+ lcdSetOrientation(LCD_ORIENTATION_LANDSCAPE);
+ break;
+ default:
+ printf("Invalid value: Enter 0 or 1%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ return;
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_pixel.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_pixel in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+
+/**************************************************************************/
+/*!
+ Displays a single pixel on the LCD.
+*/
+/**************************************************************************/
+void cmd_pixel(uint8_t argc, char **argv)
+{
+ int32_t x, y, c;
+
+ // Convert supplied parameters
+ getNumber (argv[0], &x);
+ getNumber (argv[1], &y);
+ getNumber (argv[2], &c);
+
+ // ToDo: Validate data!
+ if (c < 0 || c > 0xFFFF)
+ {
+ printf("Invalid Color%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ drawPixel(x, y, (uint16_t)c);
+}
+
+/**************************************************************************/
+/*!
+ Gets a single pixel from the LCD.
+*/
+/**************************************************************************/
+void cmd_getpixel(uint8_t argc, char **argv)
+{
+ int32_t x, y;
+
+ // Convert supplied parameters
+ getNumber (argv[0], &x);
+ getNumber (argv[1], &y);
+
+ uint16_t value = lcdGetPixel(x, y);
+
+ // Output the results
+ printf("%d%s", value, CFG_PRINTF_NEWLINE);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_progress.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_progress in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+
+/**************************************************************************/
+/*!
+ Displays a progress bar on the LCD.
+*/
+/**************************************************************************/
+void cmd_progress(uint8_t argc, char **argv)
+{
+ int32_t x, y, w, h, percent, border, borderfill, progressborder, progressfill;
+
+ // Convert supplied parameters
+ getNumber (argv[0], &x);
+ getNumber (argv[1], &y);
+ getNumber (argv[2], &w);
+ getNumber (argv[3], &h);
+ getNumber (argv[4], &percent);
+ getNumber (argv[5], &border);
+ getNumber (argv[6], &borderfill);
+ getNumber (argv[7], &progressborder);
+ getNumber (argv[8], &progressfill);
+
+ // ToDo: Validate data!
+ if (border < 0 || border > 0xFFFF || borderfill < 0 || borderfill > 0xFFFF || progressborder < 0 || progressborder > 0xFFFF || progressfill < 0 || progressfill > 0xFFFF)
+ {
+ printf("Invalid Color%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+ if (percent < 0 || percent > 100)
+ {
+ printf("Invalid Percentage%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Draw the progress bar (always use rounded corners for simplicity sake)
+ drawProgressBar(x, y, w, h, DRAW_ROUNDEDCORNERS_ALL, DRAW_ROUNDEDCORNERS_ALL, border, borderfill, progressborder, progressfill, percent);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_rectangle.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_rectangle in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+
+/**************************************************************************/
+/*!
+ Displays a rectangle on the LCD.
+*/
+/**************************************************************************/
+void cmd_rectangle(uint8_t argc, char **argv)
+{
+ int32_t x1, y1, x2, y2, c, filled, border;
+ filled = 0;
+
+ // Convert supplied parameters
+ getNumber (argv[0], &x1);
+ getNumber (argv[1], &y1);
+ getNumber (argv[2], &x2);
+ getNumber (argv[3], &y2);
+ getNumber (argv[4], &c);
+ if (argc >= 6)
+ {
+ getNumber (argv[5], &filled);
+ }
+ if (argc == 7)
+ {
+ getNumber (argv[6], &border);
+ if (border < 0 || border > 0xFFFF)
+ {
+ printf("Invalid Border Color%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+ }
+
+ // ToDo: Validate data!
+ if (c < 0 || c > 0xFFFF)
+ {
+ printf("Invalid Color%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ if (filled)
+ drawRectangleFilled(x1, y1, x2, y2, (uint16_t)c);
+ else
+ drawRectangle(x1, y1, x2, y2, (uint16_t)c);
+
+ if (argc == 7)
+ {
+ drawRectangle(x1, y1, x2, y2, (uint16_t)border);
+ }
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_text.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_text in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+ #include "drivers/lcd/tft/fonts/dejavusans9.h"
+
+/**************************************************************************/
+/*!
+ Displays the supplied text on the LCD.
+*/
+/**************************************************************************/
+void cmd_text(uint8_t argc, char **argv)
+{
+ int32_t x, y, color;
+ int32_t font;
+ uint8_t i, len;
+ char *data_ptr, data[80];
+
+ // Convert supplied parameters
+ getNumber (argv[0], &x);
+ getNumber (argv[1], &y);
+ getNumber (argv[2], &color);
+ getNumber (argv[3], &font);
+
+ // Get message contents
+ data_ptr = data;
+ for (i=0; i<argc-4; i++)
+ {
+ len = strlen(argv[i+4]);
+ strcpy((char *)data_ptr, (char *)argv[i+4]);
+ data_ptr += len;
+ *data_ptr++ = ' ';
+ }
+ *data_ptr++ = '\0';
+
+ // Only Vera Mono 9 is used by default
+ drawString((uint16_t)x, (uint16_t)y, (uint16_t)color, &dejaVuSans9ptFontInfo, (char *)&data);
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_textw.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_textw in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/drawing.h"
+ #include "drivers/lcd/tft/fonts/dejavusans9.h"
+
+/**************************************************************************/
+/*!
+ Returns the width of the supplied text in pixels.
+*/
+/**************************************************************************/
+void cmd_textw(uint8_t argc, char **argv)
+{
+ int32_t font;
+ uint8_t i, len;
+ char *data_ptr, data[80];
+
+ // Convert supplied parameters
+ getNumber (argv[0], &font);
+
+ // Get message contents
+ data_ptr = data;
+ for (i=0; i<argc-1; i++)
+ {
+ len = strlen(argv[i+1]);
+ strcpy((char *)data_ptr, (char *)argv[i+1]);
+ data_ptr += len;
+ *data_ptr++ = ' ';
+ }
+ *data_ptr++ = '\0';
+
+ // User Vera Mono 9 by default for now
+ printf("%d %s", drawGetStringWidth(&dejaVuSans9ptFontInfo, data), CFG_PRINTF_NEWLINE);
+
+ return;
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_tsthreshhold.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_tsthreshhold in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/eeprom/eeprom.h"
+ #include "drivers/lcd/tft/touchscreen.h"
+
+/**************************************************************************/
+/*!
+ Gets or sets the touch screen 'touch event' threshhold
+*/
+/**************************************************************************/
+void cmd_tsthreshhold(uint8_t argc, char **argv)
+{
+ int32_t input;
+ uint8_t value;
+
+ if (argc == 0)
+ {
+ // Display default threshold (from projectconfig.h)
+ value = tsGetThreshhold();
+ printf("%u%s", value, CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Convert supplied parameters
+ getNumber (argv[0], &input);
+ if ((input < 0) || (input > 254))
+ {
+ printf("Invalid value: Enter 0..254%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Store value in EEPROM and update the TS
+ tsSetThreshhold((uint8_t)input);
+ value = tsGetThreshhold();
+ printf("Set to %u%s", (uint8_t)value, CFG_PRINTF_NEWLINE);
+ return;
+}
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file cmd_tswait.c
+ @author K. Townsend (microBuilder.eu)
+
+ @brief Code to execute for cmd_tswait in the 'core/cmd'
+ command-line interpretter.
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "core/cmd/cmd.h"
+#include "project/commands.h" // Generic helper functions
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/touchscreen.h"
+
+/**************************************************************************/
+/*!
+ Waits for a touch screen event and returns the co-ordinates
+*/
+/**************************************************************************/
+void cmd_tswait(uint8_t argc, char **argv)
+{
+ tsTouchData_t data;
+ int32_t delay;
+ int32_t error = 0;
+
+ if (argc == 1)
+ {
+ getNumber (argv[0], &delay);
+ }
+ else
+ {
+ delay = 0;
+ }
+
+ // Validate delay
+ if (delay < 0)
+ {
+ printf("Invalid timeout%s", CFG_PRINTF_NEWLINE);
+ return;
+ }
+
+ // Blocking delay until a valid touch event occurs
+ error = tsWaitForEvent(&data, delay > 0 ? (uint32_t)delay : 0);
+
+ if (error == TS_ERROR_NONE)
+ {
+ // A valid touch event occurred ... parse data
+ printf("%d, %d%s",(int)data.xlcd, (int)data.ylcd, CFG_PRINTF_NEWLINE);
+ }
+ else
+ {
+ // Display error code
+ printf("%d %s", (int)error, CFG_PRINTF_NEWLINE);
+ }
+
+ return;
+}
+
+#endif
--- /dev/null
+Project Folder
+==============================================================================
+All project-specific files should be stored in the /project folder to try to
+keep the generic HW-level code and drivers seperate from the business logic
+of your individual project. This makes it easier to reuse your code in other
+projects, and also update the drivers and HW-level code if newer version of
+these common-files become available.
+
+FOLDERS
+==============================================================================
+commands/ Code to implements specific commands for the
+ command-line interface. Requires CFG_INTERFACE
+ to be enabled in projectconfig.h. Generally,
+ each command will be stored in a seperate file
+ (ex.: "command/cmd_hello.c"), though this isn't
+ a strict requirement and you may wish to store
+ multiple related commands in one .c file, such
+ as 'cmds_graphics.c' etc.
+
+documentation/ Project-specific documentation is stored here
+
+FILES
+==============================================================================
+cmd_tbl.h Contains the master command list for the
+ command-line interface if CFG_INTERFACE is
+ enabled in projectconfig.h. All commands
+ must be present in this list to be properly
+ handled by the CLI.
+
+commands.c Common helper functions for the command-line
+ interface.
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file projectconfig.h
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _PROJECTCONFIG_H_
+#define _PROJECTCONFIG_H_
+
+#include "lpc134x.h"
+#include "sysdefs.h"
+
+/*=========================================================================
+ BOARD SELECTION
+
+ Because several boards use this code library with sometimes slightly
+ different pin configuration, you will need to specify which board you
+ are using by enabling one of the following definitions. The code base
+ will then try to configure itself accordingly for that board.
+ -----------------------------------------------------------------------*/
+ // #define CFG_BRD_LPC1343_REFDESIGN
+ #define CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ // #define CFG_BRD_LPC1343_802154USBSTICK
+/*=========================================================================*/
+
+
+/**************************************************************************
+ PIN USAGE
+ -----------------------------------------------------------------------
+ This table tries to give an indication of which GPIO pins and
+ peripherals are used by the available drivers and SW examples. Only
+ dedicated GPIO pins available on the LPC1343 Reference Board are shown
+ below. Any unused peripheral blocks like I2C, SSP, ADC, etc., can
+ also be used as GPIO if they are available.
+
+ PORT 1 PORT 2 PORT 3
+ ========= ================= =======
+ 8 9 10 11 1 2 3 4 5 6 7 8 9 0 1 2 3
+
+ SDCARD . . . . . . . . . . . . . X . . .
+ PWM . X . . . . . . . . . . . . . . .
+ STEPPER . . . . . . . . . . . . . X X X X
+ CHIBI X X X . . . . . . . . . . . . . .
+ ILI9325/8 X X X X X X X X X X X X X . . . X
+ ST7565 X X X X X X X X X X X X X . . . X
+ ST7735 . . . . X X X X X X . . . . . . .
+ SSD1306 . . . . X X X . X X . . . . . . .
+ MCP121 . . . . . . . . . . . . . . X . .
+
+ TIMERS SSP ADC UART
+ ====================== === ======= ====
+ 16B0 16B1 32B0 32B1 0 0 1 2 3 0
+
+ SDCARD . . . . X . . . . .
+ PWM . X . . . . . . . .
+ PMU [1] . . X . . . . . . .
+ USB . . . X . . . . . .
+ STEPPER . . X . . . . . . .
+ CHIBI x . . . X . . . . .
+ ILI9325/8 . . . . . X X X X .
+ ST7565 . . . . . X X X X .
+ ST7535 . . . . . . . . . .
+ SSD1306 . . . . . . . . . .
+ INTERFACE . . . . . . . . . X[2]
+
+ [1] PMU uses 32-bit Timer 0 for SW wakeup from deep-sleep. This timer
+ can safely be used by other peripherals, but may need to be
+ reconfigured when you wakeup from deep-sleep.
+ [2] INTERFACE can be configured to use either USBCDC or UART
+
+ **************************************************************************/
+
+
+/*=========================================================================
+ FIRMWARE VERSION SETTINGS
+ -----------------------------------------------------------------------*/
+ #define CFG_FIRMWARE_VERSION_MAJOR (0)
+ #define CFG_FIRMWARE_VERSION_MINOR (9)
+ #define CFG_FIRMWARE_VERSION_REVISION (2)
+/*=========================================================================*/
+
+
+/*=========================================================================
+ CORE CPU SETTINGS
+ -----------------------------------------------------------------------
+
+ CFG_CPU_CCLK Value is for reference only. 'core/cpu/cpu.c' must
+ be modified to change the clock speed, but the value
+ should be indicated here since CFG_CPU_CCLK is used by
+ other peripherals to determine timing.
+
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ #define CFG_CPU_CCLK (72000000) // 1 tick = 13.88nS
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ #define CFG_CPU_CCLK (72000000) // 1 tick = 13.88nS
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ #define CFG_CPU_CCLK (72000000) // 1 tick = 13.88nS
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ SYSTICK TIMER
+ -----------------------------------------------------------------------
+
+ CFG_SYSTICK_DELAY_IN_MS The number of milliseconds between each tick
+ of the systick timer.
+
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ #define CFG_SYSTICK_DELAY_IN_MS (1)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ #define CFG_SYSTICK_DELAY_IN_MS (1)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ #define CFG_SYSTICK_DELAY_IN_MS (1)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ UART
+ -----------------------------------------------------------------------
+
+ CFG_UART_BAUDRATE The default UART speed. This value is used
+ when initialising UART, and should be a
+ standard value like 57600, 9600, etc.
+ NOTE: This value may be overridden if
+ another value is stored in EEPROM!
+ CFG_UART_BUFSIZE The length in bytes of the UART RX FIFO. This
+ will determine the maximum number of received
+ characters to store in memory.
+
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ #define CFG_UART_BAUDRATE (115200)
+ #define CFG_UART_BUFSIZE (512)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ #define CFG_UART_BAUDRATE (115200)
+ #define CFG_UART_BUFSIZE (512)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ #define CFG_UART_BAUDRATE (115200)
+ #define CFG_UART_BUFSIZE (512)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ SSP
+ -----------------------------------------------------------------------
+
+ CFG_SSP0_SCKPIN_2_11 Indicates which pin should be used for SCK0
+ CFG_SSP0_SCKPIN_0_6
+
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ #define CFG_SSP0_SCKPIN_2_11
+ // #define CFG_SSP0_SCKPIN_0_6
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ #define CFG_SSP0_SCKPIN_2_11
+ // #define CFG_SSP0_SCKPIN_0_6
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_SSP0_SCKPIN_2_11
+ #define CFG_SSP0_SCKPIN_0_6
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ ON-BOARD LED
+ -----------------------------------------------------------------------
+
+ CFG_LED_PORT The port for the on board LED
+ CFG_LED_PIN The pin for the on board LED
+ CFG_LED_ON The pin state to turn the LED on (0 = low, 1 = high)
+ CFG_LED_OFF The pin state to turn the LED off (0 = low, 1 = high)
+
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ #define CFG_LED_PORT (2)
+ #define CFG_LED_PIN (10)
+ #define CFG_LED_ON (0)
+ #define CFG_LED_OFF (1)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ #define CFG_LED_PORT (2)
+ #define CFG_LED_PIN (10)
+ #define CFG_LED_ON (0)
+ #define CFG_LED_OFF (1)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ #define CFG_LED_PORT (3)
+ #define CFG_LED_PIN (2)
+ #define CFG_LED_ON (0)
+ #define CFG_LED_OFF (1)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ MICRO-SD CARD
+ -----------------------------------------------------------------------
+
+ CFG_SDCARD If this field is defined SD Card and FAT32
+ file system support will be included
+ CFG_SDCARD_READONLY If this is set to 1, all commands to
+ write to the SD card will be removed
+ saving some flash space.
+ CFG_SDCARD_CDPORT The card detect port number
+ CFG_SDCARD_CDPIN The card detect pin number
+
+ NOTE: All config settings for FAT32 are defined
+ in ffconf.h
+
+ BENCHMARK: With SPI set to 6.0MHz, FATFS can read
+ ~300KB/s (w/512 byte read buffer)
+
+ PIN LAYOUT: The pin layout that is used by this driver
+ can be seen in the following schematic:
+ /tools/schematics/Breakout_TFTLCD_ILI9325_v1.3
+
+ DEPENDENCIES: SDCARD requires the use of SSP0.
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_SDCARD
+ #define CFG_SDCARD_READONLY (1) // Must be 0 or 1
+ #define CFG_SDCARD_CDPORT (3)
+ #define CFG_SDCARD_CDPIN (0)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ #define CFG_SDCARD
+ #define CFG_SDCARD_READONLY (1) // Must be 0 or 1
+ #define CFG_SDCARD_CDPORT (3)
+ #define CFG_SDCARD_CDPIN (0)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_SDCARD
+ #define CFG_SDCARD_READONLY (1) // Must be 0 or 1
+ #define CFG_SDCARD_CDPORT (3)
+ #define CFG_SDCARD_CDPIN (0)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ USB
+ -----------------------------------------------------------------------
+
+ CFG_USBHID If this field is defined USB HID support will
+ be included. Currently uses ROM-based USB HID
+ CFG_USBCDC If this field is defined USB CDC support will
+ be included, with the USB Serial Port speed
+ set to 115200 BPS by default
+ CFG_USBCDC_BAUDRATE The default TX/RX speed. This value is used
+ when initialising USBCDC, and should be a
+ standard value like 57600, 9600, etc.
+ CFG_USBCDC_INITTIMEOUT The maximum delay in milliseconds to wait for
+ USB to connect. Must be a multiple of 10!
+ CFG_USBCDC_BUFFERSIZE Size of the buffer (in bytes) that stores
+ printf data until it can be sent out in
+ 64 byte frames. The buffer is required since
+ only one frame per ms can be sent using USB
+ CDC (see 'puts' in systeminit.c).
+
+ -----------------------------------------------------------------------*/
+ #define CFG_USB_VID (0x239A)
+ #define CFG_USB_PID (0x1002)
+
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_USBHID
+ #define CFG_USBCDC
+ #define CFG_USBCDC_BAUDRATE (115200)
+ #define CFG_USBCDC_INITTIMEOUT (5000)
+ #define CFG_USBCDC_BUFFERSIZE (256)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ // #define CFG_USBHID
+ #define CFG_USBCDC
+ #define CFG_USBCDC_BAUDRATE (115200)
+ #define CFG_USBCDC_INITTIMEOUT (5000)
+ #define CFG_USBCDC_BUFFERSIZE (256)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_USBHID
+ #define CFG_USBCDC
+ #define CFG_USBCDC_BAUDRATE (115200)
+ #define CFG_USBCDC_INITTIMEOUT (5000)
+ #define CFG_USBCDC_BUFFERSIZE (256)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ PRINTF REDIRECTION
+ -----------------------------------------------------------------------
+
+ CFG_PRINTF_UART Will cause all printf statements to be
+ redirected to UART
+ CFG_PRINTF_USBCDC Will cause all printf statements to be
+ redirect to USB Serial
+ CFG_PRINTF_NEWLINE This should be either "\r\n" for Windows or
+ "\n" for *nix
+
+ Note: If no printf redirection definitions are present, all printf
+ output will be ignored, though this will also save ~350 bytes flash.
+
+ NOTE: PRINTF Support = ~350 bytes Flash (-Os)
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_PRINTF_UART
+ #define CFG_PRINTF_USBCDC
+ #define CFG_PRINTF_NEWLINE "\r\n"
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ // #define CFG_PRINTF_UART
+ #define CFG_PRINTF_USBCDC
+ #define CFG_PRINTF_NEWLINE "\r\n"
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_PRINTF_UART
+ #define CFG_PRINTF_USBCDC
+ #define CFG_PRINTF_NEWLINE "\r\n"
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ COMMAND LINE INTERFACE
+ -----------------------------------------------------------------------
+
+ CFG_INTERFACE If this field is defined the UART or USBCDC
+ based command-line interface will be included
+ CFG_INTERFACE_MAXMSGSIZE The maximum number of bytes to accept for an
+ incoming command
+ CFG_INTERFACE_PROMPT The command prompt to display at the start
+ of every new data entry line
+ CFG_INTERFACE_SILENTMODE If this is set to 1 only text generated in
+ response to commands will be send to the
+ output buffer. The command prompt will not
+ be displayed and incoming text will not be
+ echoed back to the output buffer (allowing
+ you to see the text you have input). This
+ is normally only desirable in a situation
+ where another MCU is communicating with
+ the LPC1343.
+ CFG_INTERFACE_ENABLEIRQ If this is set to 1 the IRQ pin will be
+ set high when a command starts executing
+ and will go low when the command has
+ finished executing or the LCD is not busy.
+ This allows another device to know when a
+ new command can safely be sent.
+ CFG_INTERFACE_IRQPORT The gpio port for the IRQ/busy pin
+ CFG_INTERFACE_IRQPIN The gpio pin number for the IRQ/busy pin
+
+ NOTE: The command-line interface will use either
+ USB-CDC or UART depending on whether
+ CFG_PRINTF_UART or CFG_PRINTF_USBCDC are
+ selected.
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ #define CFG_INTERFACE
+ #define CFG_INTERFACE_MAXMSGSIZE (256)
+ #define CFG_INTERFACE_PROMPT "LPC1343 >> "
+ #define CFG_INTERFACE_SILENTMODE (0)
+ #define CFG_INTERFACE_ENABLEIRQ (0)
+ #define CFG_INTERFACE_IRQPORT (2)
+ #define CFG_INTERFACE_IRQPIN (0)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ #define CFG_INTERFACE
+ #define CFG_INTERFACE_MAXMSGSIZE (256)
+ #define CFG_INTERFACE_PROMPT "LCD >> "
+ #define CFG_INTERFACE_SILENTMODE (0)
+ #define CFG_INTERFACE_ENABLEIRQ (1)
+ #define CFG_INTERFACE_IRQPORT (2)
+ #define CFG_INTERFACE_IRQPIN (0)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_INTERFACE
+ #define CFG_INTERFACE_MAXMSGSIZE (256)
+ #define CFG_INTERFACE_PROMPT "CMD >> "
+ #define CFG_INTERFACE_SILENTMODE (0)
+ #define CFG_INTERFACE_ENABLEIRQ (0)
+ #define CFG_INTERFACE_IRQPORT (2)
+ #define CFG_INTERFACE_IRQPIN (0)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ PWM SETTINGS
+ -----------------------------------------------------------------------
+
+ CFG_PWM If this is defined, a basic PWM driver
+ will be included using 16-bit Timer 1 and
+ Pin 1.9 (MAT0) for the PWM output. In
+ order to allow for a fixed number of
+ pulses to be generated, some PWM-specific
+ code is required in the 16-Bit Timer 1
+ ISR. See "core/timer16/timer16.c" for
+ more information.
+ CFG_PWM_DEFAULT_PULSEWIDTH The default pulse width in ticks
+ CFG_PWM_DEFAULT_DUTYCYCLE The default duty cycle in percent
+
+ DEPENDENCIES: PWM output requires the use of 16-bit
+ timer 1 and pin 1.9 (CT16B1_MAT0).
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_PWM
+ #define CFG_PWM_DEFAULT_PULSEWIDTH (CFG_CPU_CCLK / 1000)
+ #define CFG_PWM_DEFAULT_DUTYCYCLE (50)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ // #define CFG_PWM
+ #define CFG_PWM_DEFAULT_PULSEWIDTH (CFG_CPU_CCLK / 1000)
+ #define CFG_PWM_DEFAULT_DUTYCYCLE (50)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_PWM
+ #define CFG_PWM_DEFAULT_PULSEWIDTH (CFG_CPU_CCLK / 1000)
+ #define CFG_PWM_DEFAULT_DUTYCYCLE (50)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ STEPPER MOTOR SETTINGS
+ -----------------------------------------------------------------------
+
+ CFG_STEPPER If this is defined, a simple bi-polar
+ stepper motor will be included for common
+ H-bridge chips like the L293D or SN754410N
+
+ DEPENDENCIES: STEPPER requires the use of pins 3.0-3 and
+ 32-bit Timer 0.
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_STEPPER
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ // #define CFG_STEPPER
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_STEPPER
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ EEPROM
+ -----------------------------------------------------------------------
+
+ CFG_I2CEEPROM If defined, drivers for the onboard EEPROM
+ will be included during build
+ CFG_I2CEEPROM_SIZE The number of bytes available on the EEPROM
+
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ #define CFG_I2CEEPROM
+ #define CFG_I2CEEPROM_SIZE (3072)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ #define CFG_I2CEEPROM
+ #define CFG_I2CEEPROM_SIZE (3072)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ #define CFG_I2CEEPROM
+ #define CFG_I2CEEPROM_SIZE (3072)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ EEPROM MEMORY MAP
+ -----------------------------------------------------------------------
+ EEPROM is used to persist certain user modifiable values to make
+ sure that these changes remain in effect after a reset or hard
+ power-down. The addresses in EEPROM for these various system
+ settings/values are defined below. The first 256 bytes of EEPROM
+ are reserved for this (0x0000..0x00FF).
+
+ CFG_EEPROM_RESERVED The last byte of reserved EEPROM memory
+
+ EEPROM Address (0x0000..0x00FF)
+ ===============================
+ 0 1 2 3 4 5 6 7 8 9 A B C D E F
+ 000x x x x x x x x x . x x . . . . . Chibi
+ 001x . . . . . . . . . . . . . . . .
+ 002x x x x x . . . . . . . . . . . . UART
+ 003x x x x x x x x x x x x x x x x x Touch Screen Calibration
+ 004x x x x x x x x x x x x x x x . . Touch Screen Calibration
+ 005x . . . . . . . . . . . . . . . .
+ 006x . . . . . . . . . . . . . . . .
+ 007x . . . . . . . . . . . . . . . .
+ 008x . . . . . . . . . . . . . . . .
+ 009x . . . . . . . . . . . . . . . .
+ 00Ax . . . . . . . . . . . . . . . .
+ 00Bx . . . . . . . . . . . . . . . .
+ 00Cx . . . . . . . . . . . . . . . .
+ 00Dx . . . . . . . . . . . . . . . .
+ 00Ex . . . . . . . . . . . . . . . .
+ 00Fx . . . . . . . . . . . . . . . .
+
+ -----------------------------------------------------------------------*/
+ #define CFG_EEPROM_RESERVED (0x00FF) // Protect first 256 bytes of memory
+ #define CFG_EEPROM_CHIBI_IEEEADDR (uint16_t)(0x0000) // 8
+ #define CFG_EEPROM_CHIBI_SHORTADDR (uint16_t)(0x0009) // 2
+ #define CFG_EEPROM_TOUCHSCREEN_CALIBRATED (uint16_t)(0x0030) // 1
+ #define CFG_EEPROM_TOUCHSCREEN_CAL_AN (uint16_t)(0x0031) // 4
+ #define CFG_EEPROM_TOUCHSCREEN_CAL_BN (uint16_t)(0x0035) // 4
+ #define CFG_EEPROM_TOUCHSCREEN_CAL_CN (uint16_t)(0x0039) // 4
+ #define CFG_EEPROM_TOUCHSCREEN_CAL_DN (uint16_t)(0x003D) // 4
+ #define CFG_EEPROM_TOUCHSCREEN_CAL_EN (uint16_t)(0x0041) // 4
+ #define CFG_EEPROM_TOUCHSCREEN_CAL_FN (uint16_t)(0x0045) // 4
+ #define CFG_EEPROM_TOUCHSCREEN_CAL_DIVIDER (uint16_t)(0x0049) // 4
+ #define CFG_EEPROM_TOUCHSCREEN_THRESHHOLD (uint16_t)(0x004D) // 1
+ #define CFG_EEPROM_UART_SPEED (uint16_t)(0x0020) // 4
+/*=========================================================================*/
+
+
+/*=========================================================================
+ LM75B TEMPERATURE SENSOR
+ -----------------------------------------------------------------------
+
+ CFG_LM75B If defined, drivers for an optional LM75B
+ temperature sensor will be included during
+ build (requires external HW)
+
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_LM75B
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ // #define CFG_LM75B
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_LM75B
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ CHIBI WIRELESS STACK
+ -----------------------------------------------------------------------
+
+ CFG_CHIBI If defined, the CHIBI wireless stack will be
+ included during build. Requires external HW.
+ CFG_CHIBI_MODE The mode to use when receiving and transmitting
+ wireless data. See chb_drvr.h for possible values
+ CFG_CHIBI_POWER The power level to use when transmitting. See
+ chb_drvr.h for possible values
+ CFG_CHIBI_CHANNEL 802.15.4 Channel (0 = 868MHz, 1-10 = 915MHz)
+ CFG_CHIBI_PANID 16-bit PAN Identifier (ex.0x1234)
+ CFG_CHIBI_PROMISCUOUS Set to 1 to enabled promiscuous mode or
+ 0 to disable it. If promiscuous mode is
+ enabled be sure to set CFG_CHIBI_BUFFERSIZE
+ to an appropriately large value (ex. 1024)
+ CFG_CHIBI_BUFFERSIZE The size of the message buffer in bytes
+
+ DEPENDENCIES: Chibi requires the use of SSP0, 16-bit timer
+ 0 and pins 3.1, 3.2, 3.3. It also requires
+ the presence of CFG_I2CEEPROM.
+
+ NOTE: These settings are not relevant to all boards!
+ 'tools/schematics/AT86RF212LPC1114_v1.6.pdf'
+ show how 'CHIBI' is meant to be connected
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_CHIBI
+ #define CFG_CHIBI_MODE (0) // OQPSK_868MHZ
+ #define CFG_CHIBI_POWER (0xE9) // CHB_PWR_EU2_3DBM
+ #define CFG_CHIBI_CHANNEL (0) // 868-868.6 MHz
+ #define CFG_CHIBI_PANID (0x1234)
+ #define CFG_CHIBI_PROMISCUOUS (0)
+ #define CFG_CHIBI_BUFFERSIZE (128)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ // #define CFG_CHIBI
+ #define CFG_CHIBI_MODE (0) // OQPSK_868MHZ
+ #define CFG_CHIBI_POWER (0xE9) // CHB_PWR_EU2_3DBM
+ #define CFG_CHIBI_CHANNEL (0) // 868-868.6 MHz
+ #define CFG_CHIBI_PANID (0x1234)
+ #define CFG_CHIBI_PROMISCUOUS (0)
+ #define CFG_CHIBI_BUFFERSIZE (128)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ #define CFG_CHIBI
+ #define CFG_CHIBI_MODE (0) // OQPSK_868MHZ
+ #define CFG_CHIBI_POWER (0xE9) // CHB_PWR_EU2_3DBM
+ #define CFG_CHIBI_CHANNEL (0) // 868-868.6 MHz
+ #define CFG_CHIBI_PANID (0x1234)
+ #define CFG_CHIBI_PROMISCUOUS (0)
+ #define CFG_CHIBI_BUFFERSIZE (1024)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ TFT LCD
+ -----------------------------------------------------------------------
+
+ CFG_TFTLCD If defined, this will cause drivers for
+ a pre-determined LCD screen to be included
+ during build. Only one LCD driver can be
+ included during the build process (for ex.
+ 'drivers/lcd/hw/ILI9325.c')
+ CFG_TFTLCD_INCLUDESMALLFONTS If set to 1, smallfont support will be
+ included for 3x6, 5x8, 7x8 and 8x8 fonts.
+ This should only be enabled if these small
+ fonts are required since there is already
+ support for larger fonts generated with
+ Dot Factory
+ http://www.pavius.net/downloads/tools/53-the-dot-factory
+ CFG_TFTLCD_TS_DEFAULTTHRESHOLD Default minimum threshold to trigger a
+ touch event with the touch screen (and exit
+ from 'tsWaitForEvent' in touchscreen.c).
+ Should be an 8-bit value somewhere between
+ 8 and 75 in normal circumstances. This is
+ the default value and may be overriden by
+ a value stored in EEPROM.
+ CFG_TFTLCD_TS_KEYPADDELAY The delay in milliseconds between key
+ presses in dialogue boxes
+
+ PIN LAYOUT: The pin layout that is used by this driver
+ can be seen in the following schematic:
+ /tools/schematics/Breakout_TFTLCD_ILI9325_v1.3
+
+ DEPENDENCIES: TFTLCD requires the use of pins 1.8, 1.9,
+ 1.10, 1.11, 3.3 and 2.1-9.
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_TFTLCD
+ #define CFG_TFTLCD_INCLUDESMALLFONTS (0)
+ #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
+ #define CFG_TFTLCD_TS_KEYPADDELAY (100)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ #define CFG_TFTLCD
+ #define CFG_TFTLCD_INCLUDESMALLFONTS (0)
+ #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
+ #define CFG_TFTLCD_TS_KEYPADDELAY (100)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_TFTLCD
+ #define CFG_TFTLCD_INCLUDESMALLFONTS (0)
+ #define CFG_TFTLCD_TS_DEFAULTTHRESHOLD (50)
+ #define CFG_TFTLCD_TS_KEYPADDELAY (100)
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ 128x64 Graphic LCDs
+ -----------------------------------------------------------------------
+
+ CFG_ST7565 If defined, this will cause drivers for
+ the 128x64 pixel ST7565 LCD to be included
+ CFG_SSD1306 If defined, this will cause drivers for
+ the 128x64 pixel SSD1306 OLED display to be
+ included
+
+ Note: LPC1114 @ 36MHz and the ST7565 with the
+ backlight enabled consumes ~35mA
+
+ DEPENDENCIES: ST7565 requires the use of pins 2.1-6.
+ DEPENDENCIES: SSD1306 requires the use of pins 2.1-6.
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_ST7565
+ // #define CFG_SSD1306
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ // #define CFG_ST7565
+ // #define CFG_SSD1306
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_ST7565
+ // #define CFG_SSD1306
+ #endif
+/*=========================================================================*/
+
+
+/*=========================================================================
+ RSA Encryption
+ -----------------------------------------------------------------------
+
+ CFG_RSA If defined, support for basic RSA
+ encryption will be included.
+ CFG_RSA_BITS Indicates the number of bits used for
+ RSA encryption keys. To keep code size
+ reasonable, RSA encryption is currently
+ limited to using 64-bit or 32-bit numbers,
+ with 64-bit providing higher security, and
+ 32-bit providing smaller encrypted text
+ size.
+
+ NOTE: Please note that Printf can not be
+ used to display 64-bit values (%lld)!
+ -----------------------------------------------------------------------*/
+ #ifdef CFG_BRD_LPC1343_REFDESIGN
+ // #define CFG_RSA
+ #define CFG_RSA_BITS (32)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_TFTLCDSTANDALONE
+ // #define CFG_RSA
+ #define CFG_RSA_BITS (32)
+ #endif
+
+ #ifdef CFG_BRD_LPC1343_802154USBSTICK
+ // #define CFG_RSA
+ #define CFG_RSA_BITS (32)
+ #endif
+/*=========================================================================*/
+
+
+
+
+/*=========================================================================
+ CONFIG FILE VALIDATION
+ -------------------------------------------------------------------------
+ Basic error checking to make sure that incompatible defines are not
+ enabled at the same time, etc.
+
+ =========================================================================*/
+
+#if !defined CFG_BRD_LPC1343_REFDESIGN && !defined CFG_BRD_LPC1343_TFTLCDSTANDALONE && !defined CFG_BRD_LPC1343_802154USBSTICK
+ #error "You must defined a target board (CFG_BRD_LPC1343_REFDESIGN or CFG_BRD_LPC1343_TFTLCDSTANDALONE or CFG_BRD_LPC1343_802154USBSTICK)"
+#endif
+#if (defined CFG_BRD_LPC1343_REFDESIGN && defined CFG_BRD_LPC1343_TFTLCDSTANDALONE) || (defined CFG_BRD_LPC1343_TFTLCDSTANDALONE && defined CFG_BRD_LPC1343_802154USBSTICK) || (defined CFG_BRD_LPC1343_REFDESIGN && defined CFG_BRD_LPC1343_802154USBSTICK)
+ #error "Only one target board can be defined at a time"
+#endif
+
+#if defined CFG_PRINTF_USBCDC && defined CFG_PRINTF_UART
+ #error "CFG_PRINTF_UART or CFG_PRINTF_USBCDC cannot both be defined at once"
+#endif
+
+#if defined CFG_PRINTF_USBCDC && !defined CFG_USBCDC
+ #error "CFG_PRINTF_CDC requires CFG_USBCDC to be defined as well"
+#endif
+
+#if defined CFG_USBCDC && defined CFG_USBHID
+ #error "Only one USB class can be defined at a time (CFG_USBCDC or CFG_USBHID)"
+#endif
+
+#if defined CFG_SSP0_SCKPIN_2_11 && defined CFG_SSP0_SCKPIN_0_6
+ #error "Only one SCK pin can be defined at a time for SSP0"
+#endif
+
+#if !defined CFG_SSP0_SCKPIN_2_11 && !defined CFG_SSP0_SCKPIN_0_6
+ #error "An SCK pin must be selected for SSP0 (CFG_SSP0_SCKPIN_2_11 or CFG_SSP0_SCKPIN_0_6)"
+#endif
+
+#ifdef CFG_INTERFACE
+ #if !defined CFG_PRINTF_UART && !defined CFG_PRINTF_USBCDC
+ #error "CFG_PRINTF_UART or CFG_PRINTF_USBCDC must be defined for for CFG_INTERFACE Input/Output"
+ #endif
+ #if defined CFG_PRINTF_USBCDC && CFG_INTERFACE_SILENTMODE == 1
+ #error "CFG_INTERFACE_SILENTMODE typically isn't enabled with CFG_PRINTF_USBCDC"
+ #endif
+#endif
+
+#ifdef CFG_CHIBI
+ #if !defined CFG_I2CEEPROM
+ #error "CFG_CHIBI requires CFG_I2CEEPROM to store and retrieve addresses"
+ #endif
+ #ifdef CFG_SDCARD
+ #error "CFG_CHIBI and CFG_SDCARD can not be defined at the same time. Only one SPI block is available on the LPC1343."
+ #endif
+ #ifdef CFG_TFTLCD
+ #error "CFG_CHIBI and CFG_TFTLCD can not be defined at the same time since they both use pins 1.8, 1.9 and 1.10."
+ #endif
+ #ifdef CFG_PWM
+ #error "CFG_CHIBI and CFG_PWM can not be defined at the same time since they both use pin 1.9."
+ #endif
+ #if CFG_CHIBI_PROMISCUOUS != 0 && CFG_CHIBI_PROMISCUOUS != 1
+ #error "CFG_CHIBI_PROMISCUOUS must be equal to either 1 or 0"
+ #endif
+#endif
+
+#ifdef CFG_TFTLCD
+ #ifdef CFG_ST7565
+ #error "CFG_TFTLCD and CFG_ST7565 can not be defined at the same time."
+ #endif
+ #ifdef CFG_SSD1306
+ #error "CFG_TFTLCD and CFG_SSD1306 can not be defined at the same time."
+ #endif
+ #ifdef CFG_PWM
+ #error "CFG_TFTLCD and CFG_PWM can not be defined at the same time since they both use pin 1.9."
+ #endif
+ #if !defined CFG_I2CEEPROM
+ #error "CFG_TFTLCD requires CFG_I2CEEPROM to store and retrieve configuration settings"
+ #endif
+#endif
+
+#ifdef CFG_SDCARD
+ #ifdef CFG_STEPPER
+ #error "CFG_SDCARD and CFG_STEPPER can not be defined at the same time since they both use pin 3.0."
+ #endif
+#endif
+
+#ifdef CFG_ST7565
+ #ifdef CFG_SSD1306
+ #error "CFG_ST7565 and CFG_SSD1306 can not be defined at the same time"
+ #endif
+#endif
+
+#ifdef CFG_RSA
+ #if CFG_RSA_BITS != 64 && CFG_RSA_BITS != 32
+ #error "CFG_RSA_BITS must be equal to either 32 or 64."
+ #endif
+#endif
+
+#endif
--- /dev/null
+/**************************************************************************/
+/*!
+ @file sysdefs.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef _SYSDEFS_H_
+#define _SYSDEFS_H_
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdbool.h>
+
+// Stay compatible with ugly "windows" style
+#define BOOL bool
+#define TRUE true
+#define FALSE false
+
+typedef volatile uint8_t REG8;
+typedef volatile uint16_t REG16;
+typedef volatile uint32_t REG32;
+typedef unsigned char byte_t;
+
+#define pREG8 (REG8 *)
+#define pREG16 (REG16 *)
+#define pREG32 (REG32 *)
+
+#ifndef NULL
+#define NULL ((void *) 0)
+#endif
+
+#endif
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file sysinit.c
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "sysinit.h"
+
+#include "core/cpu/cpu.h"
+#include "core/pmu/pmu.h"
+#include "core/adc/adc.h"
+
+#ifdef CFG_PRINTF_UART
+ #include "core/uart/uart.h"
+#endif
+
+#ifdef CFG_INTERFACE
+ #include "core/cmd/cmd.h"
+#endif
+
+#ifdef CFG_CHIBI
+ #include "drivers/chibi/chb.h"
+#endif
+
+#ifdef CFG_USBHID
+ #include "core/usbhid-rom/usbhid.h"
+#endif
+
+#ifdef CFG_USBCDC
+ volatile unsigned int lastTick;
+ #include "core/usbcdc/usb.h"
+ #include "core/usbcdc/usbcore.h"
+ #include "core/usbcdc/usbhw.h"
+ #include "core/usbcdc/cdcuser.h"
+ #include "core/usbcdc/cdc_buf.h"
+#endif
+
+#ifdef CFG_ST7565
+ #include "drivers/lcd/bitmap/st7565/st7565.h"
+ #include "drivers/lcd/smallfonts.h"
+#endif
+
+#ifdef CFG_SSD1306
+ #include "drivers/lcd/bitmap/ssd1306/ssd1306.h"
+ #include "drivers/lcd/smallfonts.h"
+#endif
+
+#ifdef CFG_TFTLCD
+ #include "drivers/lcd/tft/lcd.h"
+ #include "drivers/lcd/tft/touchscreen.h"
+ #include "drivers/lcd/tft/drawing.h"
+#endif
+
+#ifdef CFG_I2CEEPROM
+ #include "drivers/eeprom/mcp24aa/mcp24aa.h"
+ #include "drivers/eeprom/eeprom.h"
+#endif
+
+#ifdef CFG_PWM
+ #include "core/pwm/pwm.h"
+#endif
+
+#ifdef CFG_SDCARD
+ #include "core/ssp/ssp.h"
+ #include "drivers/fatfs/diskio.h"
+ #include "drivers/fatfs/ff.h"
+
+ DWORD get_fattime ()
+ {
+ // ToDo!
+ return 0;
+ }
+#endif
+
+/**************************************************************************/
+/*!
+ Configures the core system clock and sets up any mandatory
+ peripherals like the systick timer, UART for printf, etc.
+
+ This function should set the HW to the default state you wish to be
+ in coming out of reset/startup, such as disabling or enabling LEDs,
+ setting specific pin states, etc.
+*/
+/**************************************************************************/
+void systemInit()
+{
+ cpuInit(); // Configure the CPU
+ systickInit(CFG_SYSTICK_DELAY_IN_MS); // Start systick timer
+ gpioInit(); // Enable GPIO
+ pmuInit(); // Configure power management
+ adcInit(); // Config adc pins to save power
+
+ // Set LED pin as output and turn LED off
+ gpioSetDir(CFG_LED_PORT, CFG_LED_PIN, 1);
+ gpioSetValue(CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
+
+ // Initialise EEPROM
+ #ifdef CFG_I2CEEPROM
+ mcp24aaInit();
+ #endif
+
+ // Initialise UART with the default baud rate
+ #ifdef CFG_PRINTF_UART
+ uint32_t uart = eepromReadU32(CFG_EEPROM_UART_SPEED);
+ if ((uart == 0xFFFFFFFF) || (uart > 115200))
+ {
+ uartInit(CFG_UART_BAUDRATE); // Use default baud rate
+ }
+ else
+ {
+ uartInit(uart); // Use baud rate from EEPROM
+ }
+ #endif
+
+ // Initialise PWM (requires 16-bit Timer 1 and P1.9)
+ #ifdef CFG_PWM
+ pwmInit();
+ #endif
+
+ // Initialise USB HID
+ #ifdef CFG_USBHID
+ usbHIDInit();
+ #endif
+
+ // Initialise USB CDC
+ #ifdef CFG_USBCDC
+ lastTick = systickGetTicks(); // Used to control output/printf timing
+ CDC_Init(); // Initialise VCOM
+ USB_Init(); // USB Initialization
+ USB_Connect(TRUE); // USB Connect
+ // Wait until USB is configured or timeout occurs
+ uint32_t usbTimeout = 0;
+ while ( usbTimeout < CFG_USBCDC_INITTIMEOUT / 10 )
+ {
+ if (USB_Configuration) break;
+ systickDelay(10); // Wait 10ms
+ usbTimeout++;
+ }
+ #endif
+
+ // Printf can now be used with UART or USBCDC
+
+ // Initialise the ST7565 128x64 pixel display
+ #ifdef CFG_ST7565
+ st7565Init();
+ st7565ClearScreen(); // Clear the screen
+ st7565Backlight(1); // Enable the backlight
+ #endif
+
+ // Initialise the SSD1306 OLED display
+ #ifdef CFG_SSD1306
+ ssd1306Init(SSD1306_SWITCHCAPVCC);
+ ssd1306ClearScreen(); // Clear the screen
+ #endif
+
+ // Initialise TFT LCD Display
+ #ifdef CFG_TFTLCD
+ lcdInit();
+ #endif
+
+ // Initialise Chibi
+ // Warning: CFG_CHIBI must be disabled if no antenna is connected,
+ // otherwise the SW will halt during initialisation
+ #ifdef CFG_CHIBI
+ // Write addresses to EEPROM for the first time if necessary
+ // uint16_t addr_short = 0x0025;
+ // uint64_t addr_ieee = 0x0000000000000025;
+ // mcp24aaWriteBuffer(CFG_EEPROM_CHIBI_SHORTADDR, (uint8_t *)&addr_short, 2);
+ // mcp24aaWriteBuffer(CFG_EEPROM_CHIBI_IEEEADDR, (uint8_t *)&addr_ieee, 8);
+ chb_init();
+ // chb_pcb_t *pcb = chb_get_pcb();
+ // printf("%-40s : 0x%04X%s", "Chibi Initialised", pcb->src_addr, CFG_PRINTF_NEWLINE);
+ #endif
+
+ // Start the command line interface
+ #ifdef CFG_INTERFACE
+ cmdInit();
+ #endif
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends a single byte to a pre-determined peripheral (UART, etc.).
+
+ @param[in] byte
+ Byte value to send
+*/
+/**************************************************************************/
+void __putchar(const char c)
+{
+ #ifdef CFG_PRINTF_UART
+ // Send output to UART
+ uartSendByte(c);
+ #endif
+}
+
+/**************************************************************************/
+/*!
+ @brief Sends a string to a pre-determined end point (UART, etc.).
+
+ @param[in] str
+ Text to send
+
+ @note This function is only called when using the GCC-compiler
+ in Codelite or running the Makefile manually. This function
+ will not be called when using the C library in Crossworks for
+ ARM.
+*/
+/**************************************************************************/
+int puts(const char * str)
+{
+ // There must be at least 1ms between USB frames (of up to 64 bytes)
+ // This buffers all data and writes it out from the buffer one frame
+ // and one millisecond at a time
+ #ifdef CFG_PRINTF_USBCDC
+ if (USB_Configuration)
+ {
+ while(*str)
+ cdcBufferWrite(*str++);
+ // Check if we can flush the buffer now or if we need to wait
+ unsigned int currentTick = systickGetTicks();
+ if (currentTick != lastTick)
+ {
+ uint8_t frame[64];
+ uint32_t bytesRead = 0;
+ while (cdcBufferDataPending())
+ {
+ // Read up to 64 bytes as long as possible
+ bytesRead = cdcBufferReadLen(frame, 64);
+ USB_WriteEP (CDC_DEP_IN, frame, bytesRead);
+ systickDelay(1);
+ }
+ lastTick = currentTick;
+ }
+ }
+ #else
+ // Handle output character by character in __putchar
+ while(*str) __putchar(*str++);
+ #endif
+
+ return 0;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file sysinit.h
+ @author K. Townsend (microBuilder.eu)
+ @date 22 March 2010
+ @version 0.10
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+
+#ifndef __SYSINIT_H__
+#define __SYSINIT_H__
+
+#include "projectconfig.h"
+
+#include "core/gpio/gpio.h"
+#include "core/systick/systick.h"
+
+// Function prototypes
+void systemInit();
+
+#endif
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<ArrayOfOutputConfiguration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
+ <OutputConfiguration>
+ <commentVariableName>true</commentVariableName>
+ <commentCharVisualizer>true</commentCharVisualizer>
+ <commentCharDescriptor>true</commentCharDescriptor>
+ <commentStyle>C</commentStyle>
+ <bmpVisualizerChar>#</bmpVisualizerChar>
+ <rotation>RotateNinety</rotation>
+ <flipHorizontal>false</flipHorizontal>
+ <flipVertical>false</flipVertical>
+ <paddingRemovalHorizontal>Fixed</paddingRemovalHorizontal>
+ <paddingRemovalVertical>Tighest</paddingRemovalVertical>
+ <lineWrap>AtColumn</lineWrap>
+ <byteOrder>MsbFirst</byteOrder>
+ <byteFormat>Hex</byteFormat>
+ <byteLeadingString>0x</byteLeadingString>
+ <generateLookupArray>true</generateLookupArray>
+ <descCharWidth>DisplayInBits</descCharWidth>
+ <descCharHeight>DontDisplay</descCharHeight>
+ <descFontHeight>DisplayInBytes</descFontHeight>
+ <generateSpaceCharacterBitmap>true</generateSpaceCharacterBitmap>
+ <spaceGenerationPixels>5</spaceGenerationPixels>
+ <displayName>VariableWidth</displayName>
+ </OutputConfiguration>
+ <OutputConfiguration>
+ <commentVariableName>true</commentVariableName>
+ <commentCharVisualizer>true</commentCharVisualizer>
+ <commentCharDescriptor>true</commentCharDescriptor>
+ <commentStyle>C</commentStyle>
+ <bmpVisualizerChar>#</bmpVisualizerChar>
+ <rotation>RotateNinety</rotation>
+ <flipHorizontal>false</flipHorizontal>
+ <flipVertical>false</flipVertical>
+ <paddingRemovalHorizontal>Fixed</paddingRemovalHorizontal>
+ <paddingRemovalVertical>Fixed</paddingRemovalVertical>
+ <lineWrap>AtColumn</lineWrap>
+ <byteOrder>MsbFirst</byteOrder>
+ <byteFormat>Hex</byteFormat>
+ <byteLeadingString>0x</byteLeadingString>
+ <generateLookupArray>true</generateLookupArray>
+ <descCharWidth>DisplayInBits</descCharWidth>
+ <descCharHeight>DontDisplay</descCharHeight>
+ <descFontHeight>DisplayInBytes</descFontHeight>
+ <generateSpaceCharacterBitmap>true</generateSpaceCharacterBitmap>
+ <spaceGenerationPixels>8</spaceGenerationPixels>
+ <displayName>FixedWidth</displayName>
+ </OutputConfiguration>
+</ArrayOfOutputConfiguration>
\ No newline at end of file
--- /dev/null
+The Dot Factory is a GPL license program that can be used to
+convert TTF fonts for .c files. The latest Windows binary
+and source files can be found at:
+
+http://www.pavius.net/downloads/tools/53-the-dot-factory
+
+The source and binary files are included here purely for
+convenience sake.
+
+The following fonts are used in the LPC1343
+Code Base:
+
+DejaVu - http://dejavu-fonts.org/wiki/Main_Page
+Bitsream Vera - http://www.gnome.org/fonts/
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+#include "core/systick/systick.h"
+
+/**************************************************************************/
+/*!
+ Cause the LED to blink once per second using a blocking delay
+*/
+/**************************************************************************/
+int main(void)
+{
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ while (1)
+ {
+ // Wait one second
+ systickDelay(1000);
+ // Toggle the LED
+ if (gpioGetValue(CFG_LED_PORT, CFG_LED_PIN) == CFG_LED_OFF)
+ {
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_ON);
+ }
+ else
+ {
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
+ }
+ }
+
+ return 0;
+}
--- /dev/null
+Causes the LED to blink once per second
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+#include "core/systick/systick.h"
+
+#ifdef CFG_INTERFACE
+ #include "core/cmd/cmd.h"
+#endif
+
+/**************************************************************************/
+/*!
+ Causes the LED to flash every second using a non-blocking delay,
+ and constantly checks if any incoming characters have arrived in
+ the UART buffer for the CLI
+
+ projectconfig.h settings:
+ --------------------------------------------------
+ CFG_INTERFACE -> Enabled
+ CFG_PRINTF_USBCDC -> Enabled if USB is used for the CLI
+ CFG_PRINTF_UART -> Enabled if UART is used for the CLI
+*/
+/**************************************************************************/
+int main(void)
+{
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ uint32_t currentSecond, lastSecond;
+ currentSecond = lastSecond = 0;
+
+ // Toggle LED once per second and constantly check CLI input
+ while (1)
+ {
+ // Get the number of seconds the CPU has been active
+ // If the value has changed we've advanced at least 1 second
+ currentSecond = systickGetSecondsActive();
+ if (currentSecond != lastSecond)
+ {
+ lastSecond = currentSecond;
+ // Toggle the LED
+ if (gpioGetValue(CFG_LED_PORT, CFG_LED_PIN) == CFG_LED_OFF)
+ {
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_ON);
+ }
+ else
+ {
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
+ }
+ }
+
+ // Poll for CLI input if CFG_INTERFACE is enabled in projectconfig.h
+ #ifdef CFG_INTERFACE
+ cmdPoll();
+ #endif
+ }
+
+ return 0;
+}
--- /dev/null
+Causes the LED to blink once per second using a non-blocking delay, as well
+as constantly checking the UART or USB CDC buffer for incoming data to be
+passed to the CLI. You can connect to the CLI using UART or USB, send and
+receive commands, and the LED should continue blinking (as long as a command
+is not using the MCU).
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2011, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+#include "core/systick/systick.h"
+
+#ifdef CFG_INTERFACE
+ #include "core/cmd/cmd.h"
+#endif
+
+#ifdef CFG_PWM
+ #include "core/pwm/pwm.h"
+#endif
+
+/**************************************************************************/
+/*!
+ Main program entry point. After reset, normal code execution will
+ begin here.
+*/
+/**************************************************************************/
+int main(void)
+{
+ #ifndef CFG_PWM
+ #ERROR "CFG_PWM must be enabled in projectconfig.h for this example."
+ #endif
+
+ // Configure cpu and mandatory peripherals
+ // PWM is initialised in systemInit and defaults to using P1.9
+ systemInit();
+
+ // Set duty cycle to 50% for square wave output
+ pwmSetDutyCycle(50);
+
+ // Frequency can be set anywhere from 2khz and 10khz (4khz is loudest)
+ // Note: Since this is a 16-bit timer, make sure the delay is not
+ // greater than 0xFFFF (65535), though anything 2khz and higher
+ // is within an acceptable range
+ // The piezo buzzer used for this example is the PS1240, available at
+ // http://www.adafruit.com/index.php?main_page=product_info&cPath=35&products_id=160
+ pwmSetFrequencyInTicks(CFG_CPU_CCLK / 2000);
+
+ uint32_t currentSecond, lastSecond;
+ currentSecond = lastSecond = 0;
+
+ while (1)
+ {
+ // Beep the piezo buzzer very briefly once per second, toggling the LED at the same time
+ currentSecond = systickGetSecondsActive();
+ // Make sure that at least one second has passed
+ if (currentSecond != lastSecond)
+ {
+ // Update the second tracker
+ lastSecond = currentSecond;
+ // Set the LED state and buzzer loudness depending on the current LED state
+ if (gpioGetValue(CFG_LED_PORT, CFG_LED_PIN) == CFG_LED_OFF)
+ {
+ pwmSetFrequencyInTicks(CFG_CPU_CCLK / 4000); // 4khz (louder)
+ pwmStartFixed(200); // 2x as long as @ 2khz since it's 2x faster
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_ON); // Turn the LED on
+ }
+ else
+ {
+ pwmSetFrequencyInTicks(CFG_CPU_CCLK / 2000); // 2khz (softer)
+ pwmStartFixed(100);
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF); // Turn the LED off
+ }
+ }
+ }
+
+ return 0;
+}
--- /dev/null
+This example uses a 16-bit timer for PWM, and makes a common
+piezo buzzer beep briefly once per second at an alternating
+frequency.
+
+The piezo-buzzer used in this example is the PS1240, available
+from Adafruit Industries at:
+
+http://www.adafruit.com/index.php?main_page=product_info&cPath=35&products_id=160
+
+The buzzer should have one pin (either is fine) connected to P1.9
+on the LPC1343, and the other pin connected to GND. CFG_PWM must also
+be enabled in projectconfig.h.
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+#include "drivers/chibi/chb.h"
+#include "drivers/chibi/chb_drvr.h"
+
+static chb_rx_data_t rx_data;
+
+/**************************************************************************/
+/*!
+ Converts the ED (Energy Detection) value to dBm using the following
+ formula: dBm = RSSI_BASE_VAL + 1.03 * ED
+
+ For more information see section 6.5 of the AT86RF212 datasheet
+*/
+/**************************************************************************/
+int edToDBM(uint32_t ed)
+{
+ #if CFG_CHIBI_MODE == 0 || CFG_CHIBI_MODE == 1 || CFG_CHIBI_MODE == 2
+ // Calculate for OQPSK (RSSI Base Value = -100)
+ int dbm = (103 * ed - 10000);
+ #else
+ // Calculate for BPSK (RSSI Base Value = -98)
+ int dbm = (103 * ed - 9800);
+ #endif
+
+ return dbm / 100;
+}
+
+/**************************************************************************/
+/*!
+ Constantly checks for incoming messages, and displays them using
+ printf when they arrive. This program will display messages sent
+ to the global broadcast address (0xFFFF) or messages addressed to
+ this node using it's unique 16-bit ID.
+
+ projectconfig.h settings:
+ --------------------------------------------------
+ CFG_CHIBI -> Enabled
+ CFG_CHIBI_PROMISCUOUS -> 0
+ CFG_CHIBI_BUFFERSIZE -> 128
+*/
+/**************************************************************************/
+int main(void)
+{
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ // Make sure that projectconfig.h is properly configured for this example
+ #if !defined CFG_CHIBI
+ #error "CFG_CHIBI must be enabled in projectconfig.h for this example"
+ #endif
+ #if CFG_CHIBI_PROMISCUOUS != 0
+ #error "CFG_CHIBI_PROMISCUOUS must be set to 0 in projectconfig.h for this example"
+ #endif
+
+ // Get a reference to the Chibi peripheral control block
+ chb_pcb_t *pcb = chb_get_pcb();
+
+ while(1)
+ {
+ // Check for incoming messages
+ while (pcb->data_rcv)
+ {
+ // Enable LED to indicate message reception
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_ON);
+ // get the length of the data
+ rx_data.len = chb_read(&rx_data);
+ // make sure the length is nonzero
+ if (rx_data.len)
+ {
+ int dbm = edToDBM(pcb->ed);
+ printf("Message received from node %02X: %s, len=%d, dBm=%d.%s", rx_data.src_addr, rx_data.data, rx_data.len, dbm, CFG_PRINTF_NEWLINE);
+ }
+ // Disable LED
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
+ }
+ }
+
+ return 0;
+}
--- /dev/null
+Looks for any incoming messages using the global broadcast address
+(0xFFFF) of this node's addresses and displays the message content
+using printf (redirect to UART by default).
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+
+#if defined CFG_CHIBI
+ #include <string.h>
+ #include <stdlib.h>
+ #include "drivers/chibi/chb.h"
+ #include "drivers/chibi/chb_drvr.h"
+ #include "core/uart/uart.h"
+ static chb_rx_data_t rx_data;
+#endif
+
+#ifdef CFG_PRINTF_USBCDC
+ volatile unsigned int lastTick;
+ #include "core/usbcdc/usb.h"
+ #include "core/usbcdc/usbcore.h"
+ #include "core/usbcdc/usbhw.h"
+ #include "core/usbcdc/cdcuser.h"
+ #include "core/usbcdc/cdc_buf.h"
+#endif
+
+/**************************************************************************/
+/*!
+ Use Chibi as a wireless sniffer and write all captured frames
+ to UART or USB CDC for wsbridge to handle (see "tools/wsbridge")
+
+ projectconfig.h settings:
+ --------------------------------------------------
+ CFG_CHIBI -> Enabled
+ CFG_CHIBI_PROMISCUOUS -> 1
+ CFG_CHIBI_BUFFERSIZE -> 1024
+*/
+/**************************************************************************/
+int main(void)
+{
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ // Check if projectconfig.h is properly configured for this example
+ #if !defined CFG_CHIBI
+ #error "CFG_CHIBI must be enabled in projectconfig.h for this example"
+ #endif
+ #if CFG_CHIBI_PROMISCUOUS == 0
+ #error "CFG_CHIBI_PROMISCUOUS must set to 1 in projectconfig.h for this example"
+ #endif
+ #if defined CFG_INTERFACE
+ #error "CFG_INTERFACE must be disabled in projectconfig.h for this example"
+ #endif
+
+ #if defined CFG_CHIBI && CFG_CHIBI_PROMISCUOUS != 0
+ // Get a reference to the Chibi peripheral control block
+ chb_pcb_t *pcb = chb_get_pcb();
+
+ // Wait for incoming frames and transmit the raw data over uart
+ while(1)
+ {
+ // Check for incoming messages
+ while (pcb->data_rcv)
+ {
+ // get the length of the data
+ rx_data.len = chb_read(&rx_data);
+ // make sure the length is nonzero
+ if (rx_data.len)
+ {
+ // Enable LED to indicate message reception
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_ON);
+
+
+ // Send raw data the to PC for processing using wsbridge
+ uint8_t i;
+ for (i=0; i<rx_data.len; i++)
+ {
+ #ifdef CFG_PRINTF_UART
+ uartSendByte(rx_data.data[i]);
+ #endif
+ #ifdef CFG_PRINTF_USBCDC
+ // ToDo: This really needs to be refactored!
+ if (USB_Configuration)
+ {
+ cdcBufferWrite(rx_data.data[i]);
+ // Check if we can flush the buffer now or if we need to wait
+ unsigned int currentTick = systickGetTicks();
+ if (currentTick != lastTick)
+ {
+ uint8_t frame[64];
+ uint32_t bytesRead = 0;
+ while (cdcBufferDataPending())
+ {
+ // Read 64 byte chunks until end of data
+ bytesRead = cdcBufferReadLen(frame, 64);
+ // debug_printf("%d,", bytesRead);
+ USB_WriteEP (CDC_DEP_IN, frame, bytesRead);
+ systickDelay(1);
+ }
+ lastTick = currentTick;
+ }
+ }
+ #endif
+ }
+
+ // Disable LED
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
+ }
+ }
+ }
+ #endif
+
+ return 0;
+}
--- /dev/null
+Uses 'PROMISCUOUS' mode in Chibi, which listens to ANY message available within
+hearing range, and retransmits the raw frame data over UART in libpcap format.
+Using the open source 'wsbridge' application (tools/wsbridge), the data can
+be piped into wireshark on any Windows or Linux PC. This useful functionality
+is perfect for debugging wireless sensor networks since you can capture, log and
+analyse all traffic and frame data moving around the wireless sensor network.
+
+For more information on wsbridge see:
+http://freaklabs.org/index.php/Tutorials/Software/Feeding-the-Shark-Turning-the-Freakduino-into-a-Realtime-Wireless-Protocol-Analyzer-with-Wireshark.html
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+
+#if defined CFG_CHIBI
+ #include <string.h>
+ #include <stdlib.h>
+ #include "drivers/chibi/chb.h"
+ #include "drivers/chibi/chb_drvr.h"
+#endif
+
+/**************************************************************************/
+/*!
+ Broadcast a basic message every 250 milliseconds
+
+ projectconfig.h settings:
+ --------------------------------------------------
+ CFG_CHIBI -> Enabled
+ CFG_CHIBI_PROMISCUOUS -> 0
+ CFG_CHIBI_BUFFERSIZE -> 128
+*/
+/**************************************************************************/
+int main(void)
+{
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ // Make sure that projectconfig.h is properly configured for this example
+ #if !defined CFG_CHIBI
+ #error "CFG_CHIBI must be enabled in projectconfig.h for this example"
+ #endif
+ #if CFG_CHIBI_PROMISCUOUS != 0
+ #error "CFG_CHIBI_PROMISCUOUS must be set to 0 in projectconfig.h for this example"
+ #endif
+
+ #ifdef CFG_CHIBI
+ uint32_t counter = 0;
+ chb_pcb_t *pcb = chb_get_pcb();
+
+ while(1)
+ {
+ // Enable LED
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_ON);
+ // Create and send the message
+ char text[10];
+ counter++;
+ itoa(counter, text, 10);
+ chb_write(0xFFFF, text, strlen(text) + 1);
+ // Disable LED
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
+ systickDelay(250);
+ }
+ #endif
+
+ return 0;
+}
--- /dev/null
+Broadcasts a basic messages every 250 milliseconds that will be
+received by every node within hearing distance.
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2011, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+#include "core/systick/systick.h"
+
+#ifdef CFG_INTERFACE
+ #include "core/cmd/cmd.h"
+#endif
+
+/**************************************************************************/
+/*!
+ Approximates a 1 millisecond delay using "nop". This is less
+ accurate than a dedicated timer, but is useful in certain situations.
+
+ The number of ticks to delay depends on the optimisation level set
+ when compiling (-O). Depending on the compiler settings, one of the
+ two defined values for 'delay' should be used.
+*/
+/**************************************************************************/
+void delayms(uint32_t ms)
+{
+ uint32_t delay = ms * ((CFG_CPU_CCLK / 100) / 45); // Release Mode (-Os)
+ // uint32_t delay = ms * ((CFG_CPU_CCLK / 100) / 120); // Debug Mode (No optimisations)
+
+ while (delay > 0)
+ {
+ __asm volatile ("nop");
+ delay--;
+ }
+}
+
+/**************************************************************************/
+/*!
+ Main program entry point. After reset, normal code execution will
+ begin here.
+*/
+/**************************************************************************/
+int main(void)
+{
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ uint32_t currentSecond, lastSecond;
+ currentSecond = lastSecond = 0;
+
+ while (1)
+ {
+ // Toggle LED once per second ... rollover = 136 years :)
+ currentSecond = systickGetSecondsActive();
+ if (currentSecond != lastSecond)
+ {
+ lastSecond = currentSecond;
+ if (gpioGetValue(CFG_LED_PORT, CFG_LED_PIN) == CFG_LED_OFF)
+ {
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_ON);
+ }
+ else
+ {
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
+ }
+ }
+
+ // Poll for CLI input if CFG_INTERFACE is enabled in projectconfig.h
+ #ifdef CFG_INTERFACE
+ cmdPoll();
+ #endif
+ }
+
+ return 0;
+}
--- /dev/null
+This is the default main.c file used in the code base and will cause
+the test LED to blinks once per second and process any incoming data
+for the CLI if CFG_INTERFACE is enabled in projectconfig.h
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2011, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+#include "core/adc/adc.h"
+#include "core/systick/systick.h"
+
+#include "drivers/lcd/tft/lcd.h"
+#include "drivers/lcd/tft/bmp.h"
+#include "drivers/lcd/tft/drawing.h"
+#include "drivers/lcd/tft/touchscreen.h"
+#include "drivers/lcd/tft/fonts/dejavusans9.h"
+#include "drivers/lcd/tft/fonts/dejavusansbold9.h"
+#include "drivers/lcd/tft/fonts/dejavusansmono8.h"
+
+#include "drivers/lcd/icons16.h"
+
+// Color scheme
+#define FONT_REGULAR &dejaVuSans9ptFontInfo
+#define FONT_BOLD &dejaVuSansBold9ptFontInfo
+#define COL_BACKGROUND COLOR_GRAY_80
+#define COL_TEXT COLOR_WHITE
+
+#define COL_BUTTON COLOR_GRAY_50
+#define COL_BUTTONBORDER COLOR_GRAY_50
+#define COL_BUTTONTEXT COLOR_WHITE
+#define COL_BUTTONACTIVE COLOR_THEME_DEFAULT_BASE
+#define COL_BUTTONACTIVEBORDER COLOR_THEME_DEFAULT_DARKER
+#define COL_BUTTONACTIVETEXT COLOR_BLACK
+
+#define COL_MENU COLOR_GRAY_30
+#define COL_MENULIGHTER COLOR_GRAY_50
+#define COL_MENUTEXT COLOR_WHITE
+#define COL_MENUACTIVE COLOR_THEME_DEFAULT_DARKER
+#define COL_MENUACTIVELIGHTER COLOR_THEME_DEFAULT_BASE
+#define COL_MENUACTIVETEXT COLOR_BLACK
+
+/**************************************************************************/
+/*!
+ Draws a single entry in the menu (adjusting the display depending
+ on whether the item is currently active or not)
+*/
+/**************************************************************************/
+void renderMenuItem(uint16_t x, uint16_t y, uint16_t width, uint16_t height, uint16_t headerWidth, bool active, char* headerText, char* bodyText)
+{
+ drawRectangleRounded(x, y, x+headerWidth, y+height, active ? COL_MENUACTIVE : COL_MENU, 10, DRAW_ROUNDEDCORNERS_NONE);
+ drawRectangleRounded(x+headerWidth, y, x+width, y+height, active ? COL_MENUACTIVELIGHTER : COL_MENULIGHTER, 10, DRAW_ROUNDEDCORNERS_NONE);
+ drawString(x+10, y+height/2, active ? COL_MENUACTIVETEXT : COL_MENUTEXT, FONT_BOLD, headerText);
+ drawString(x+headerWidth+25, y+height/2, active ? COL_MENUACTIVETEXT: COL_MENUTEXT, FONT_REGULAR, bodyText);
+
+ if (active)
+ {
+ drawArrow(x+headerWidth+5, y+height/2, 7, DRAW_DIRECTION_LEFT, COL_MENUACTIVETEXT);
+ drawArrow(x+width-5, y+height/2, 7, DRAW_DIRECTION_RIGHT, COL_MENUACTIVETEXT);
+ }
+}
+
+/**************************************************************************/
+/*!
+ Renders the 16x16 icons found in "/drivers/lcd/icons16.h"
+*/
+/**************************************************************************/
+void renderIcons(void)
+{
+ // Cross/Failed
+ drawRectangleRounded(10, 190, 30, 210, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(12, 192, COLOR_RED, icons16_failed);
+ drawRectangleRounded(10, 220, 30, 240, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(12, 222, COLOR_RED, icons16_failed);
+ drawIcon16(12, 222, COLOR_WHITE, icons16_failed_interior);
+ drawRectangleRounded(10, 250, 30, 270, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(12, 252, COLOR_WHITE, icons16_failed_interior);
+
+ // Alert
+ drawRectangleRounded(40, 190, 60, 210, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(42, 192, COLOR_YELLOW, icons16_alert);
+ drawRectangleRounded(40, 220, 60, 240, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(42, 222, COLOR_YELLOW, icons16_alert);
+ drawIcon16(42, 222, COLOR_WHITE, icons16_alert_interior);
+ drawRectangleRounded(40, 250, 60, 270, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(42, 252, COLOR_WHITE, icons16_alert_interior);
+
+ // Checkmark/Passed
+ drawRectangleRounded(70, 190, 90, 210, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(72, 192, COLOR_GREEN, icons16_passed);
+ drawRectangleRounded(70, 220, 90, 240, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(72, 222, COLOR_GREEN, icons16_passed);
+ drawIcon16(72, 222, COLOR_WHITE, icons16_passed_interior);
+ drawRectangleRounded(70, 250, 90, 270, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(72, 252, COLOR_WHITE, icons16_passed_interior);
+
+ // Info
+ drawRectangleRounded(100, 190, 120, 210, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(102, 192, COLOR_BLUE, icons16_info);
+ drawRectangleRounded(100, 220, 120, 240, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(102, 222, COLOR_BLUE, icons16_info);
+ drawIcon16(102, 222, COLOR_WHITE, icons16_info_interior);
+ drawRectangleRounded(100, 250, 120, 270, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(102, 252, COLOR_WHITE, icons16_info_interior);
+
+ // Tools/Config
+ drawRectangleRounded(130, 190, 150, 210, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(132, 192, COLOR_GREEN, icons16_tools);
+
+ // Pointer
+ drawRectangleRounded(160, 190, 180, 210, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(162, 192, COLOR_MAGENTA, icons16_pointer);
+ drawRectangleRounded(160, 220, 180, 240, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(162, 222, COLOR_MAGENTA, icons16_pointer);
+ drawIcon16(162, 222, COLOR_WHITE, icons16_pointer_dot);
+ drawRectangleRounded(160, 250, 180, 270, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(162, 252, COLOR_WHITE, icons16_pointer_dot);
+
+ // Tag
+ drawRectangleRounded(190, 190, 210, 210, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(192, 192, COLOR_CYAN, icons16_tag);
+ drawRectangleRounded(190, 220, 210, 240, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(192, 222, COLOR_CYAN, icons16_tag);
+ drawIcon16(192, 222, COLOR_WHITE, icons16_tag_dot);
+ drawRectangleRounded(190, 250, 210, 270, COL_BUTTON, 5, DRAW_ROUNDEDCORNERS_ALL);
+ drawIcon16(192, 252, COLOR_WHITE, icons16_tag_dot);
+}
+
+/**************************************************************************/
+/*!
+ Main program entry point. After reset, normal code execution will
+ begin here.
+*/
+/**************************************************************************/
+int main(void)
+{
+ #if !defined CFG_TFTLCD
+ #error "CFG_TFTLCD must be enabled in projectconfig.h for this test"
+ #endif
+
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ // Background
+ drawFill(COL_BACKGROUND);
+
+ // Top/bottom action bars
+ drawRectangleFilled(0, 0, 239, 19, COL_MENU);
+ drawRectangleFilled(0, 280, 239, 319, COL_MENU);
+
+ // Menu
+ drawRectangleRounded(6, 30, 232, 160, COL_MENU, 10, DRAW_ROUNDEDCORNERS_ALL);
+ drawString(20, 45, COL_MENUTEXT, FONT_BOLD, "SYSTEM SETTINGS");
+ renderMenuItem(8, 65, 222, 23, 90, false, "LANGUAGE", "English");
+ renderMenuItem(8, 90, 222, 23, 90, false, "TIMEZONE", "GMT+1");
+ renderMenuItem(8, 115, 222, 23, 90, true, "SLEEP", "5 Minutes");
+
+ // Progress bar
+ drawProgressBar (70, 165, 160, 15, DRAW_ROUNDEDCORNERS_ALL, DRAW_ROUNDEDCORNERS_ALL, COL_MENU, COL_MENULIGHTER, COL_MENUACTIVE, COL_MENUACTIVELIGHTER, 72 );
+
+ // Render some icons
+ renderIcons();
+
+ // Action bar buttons
+ drawButton(5, 285, 75, 29, FONT_BOLD, 7, COL_BUTTONBORDER, COL_BUTTON, COL_BUTTONTEXT, "CANCEL");
+ drawButton(160, 285, 75, 29, FONT_BOLD, 7, COL_BUTTONBORDER, COL_BUTTON, COL_BUTTONTEXT, "SAVE");
+
+ tsTouchData_t touch;
+ tsTouchError_t error;
+
+ // Draw pixels whenever a touch screen event is detected
+ while (1)
+ {
+ // Wait for a valid touch event
+ error = tsWaitForEvent(&touch, 0);
+ if (!error)
+ {
+ drawPixel(touch.xlcd, touch.ylcd, COLOR_WHITE);
+ }
+ }
+
+ return 0;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2011, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+#include "core/systick/systick.h"
+
+#include "drivers/lcd/tft/lcd.h"
+#include "drivers/lcd/tft/drawing.h"
+#include "drivers/lcd/tft/touchscreen.h"
+#include "drivers/lcd/tft/dialogues/alphanumeric.h"
+
+#include "drivers/lcd/tft/fonts/dejavusans9.h"
+#include "drivers/lcd/tft/fonts/dejavusansbold9.h"
+#include "drivers/lcd/tft/fonts/dejavusansmono8.h"
+
+/**************************************************************************/
+/*!
+ Main program entry point. After reset, normal code execution will
+ begin here.
+*/
+/**************************************************************************/
+int main(void)
+{
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ #if !defined CFG_TFTLCD
+ #error "CFG_TFTLCD must be enabled in projectconfig.h for this test"
+ #endif
+ #if defined CFG_INTERFACE
+ #error "CFG_INTERFACE must be disabled in projectconfig.h for this test (to save space)"
+ #endif
+
+ // Clear the screen
+ // ---------------------------------------------------------------------
+ drawFill(COLOR_WHITE);
+
+ // Render some text using DejaVu Sans 9 and Sans Mono 8
+ // ---------------------------------------------------------------------
+ drawString(5, 10, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, "DejaVu Sans 9 Bold");
+ drawString(5, 30, COLOR_BLACK, &dejaVuSans9ptFontInfo, "DejaVu Sans 9");
+ drawString(5, 50, COLOR_BLACK, &dejaVuSansMono8ptFontInfo, "DejaVu Sans Mono 8");
+
+ // Change the LCD orientation to render text horizontally
+ // ---------------------------------------------------------------------
+ lcdProperties_t lcdProperties = lcdGetProperties();
+ // Check if the screen orientation can be changed
+ if (lcdProperties.orientation)
+ {
+ // Change the orientation
+ lcdSetOrientation(lcdGetOrientation() == LCD_ORIENTATION_PORTRAIT ?
+ LCD_ORIENTATION_LANDSCAPE : LCD_ORIENTATION_PORTRAIT);
+ // Render some text in the new orientation
+ drawString(5, 10, COLOR_BLACK, &dejaVuSans9ptFontInfo, "DejaVu Sans 9 (Rotated)");
+ // Change the orientation back
+ lcdSetOrientation(lcdGetOrientation() == LCD_ORIENTATION_PORTRAIT ?
+ LCD_ORIENTATION_LANDSCAPE : LCD_ORIENTATION_PORTRAIT);
+ }
+
+ // Draw some primitive shapes
+ // ---------------------------------------------------------------------
+ drawLine(5, 65, 200, 65, COLOR_RED);
+ drawLine(5, 67, 200, 67, COLOR_GREEN);
+ drawLine(5, 69, 200, 69, COLOR_BLUE);
+ drawCircleFilled(30, 105, 25, COLOR_BLACK);
+ drawCircleFilled(30, 105, 23, drawRGB24toRGB565(0x33, 0x00, 0x00));
+ drawCircleFilled(30, 105, 19, drawRGB24toRGB565(0x66, 0x00, 0x00));
+ drawCircleFilled(30, 105, 15, drawRGB24toRGB565(0x99, 0x00, 0x00));
+ drawCircleFilled(30, 105, 11, drawRGB24toRGB565(0xCC, 0x00, 0x00));
+ drawCircleFilled(30, 105, 7, drawRGB24toRGB565(0xFF, 0x00, 0x00));
+ drawRectangleFilled( 80, 80, 180, 125, COLOR_DARKERGRAY);
+ drawRectangleFilled( 85, 85, 175, 120, COLOR_DARKGRAY);
+ drawRectangleFilled( 90, 90, 170, 115, COLOR_MEDIUMGRAY);
+ drawRectangleFilled( 95, 95, 165, 110, COLOR_LIGHTGRAY);
+ drawRectangleFilled(100, 100, 160, 105, COLOR_PALEGRAY);
+
+ // Draw some compound shapes
+ // ---------------------------------------------------------------------
+ drawProgressBar(70, 140, 75, 12, COLOR_BLACK, COLOR_MEDIUMGRAY, 78);
+ drawString(5, 144, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, "Progress");
+ drawString(155, 144, COLOR_BLACK, &dejaVuSans9ptFontInfo, "78%");
+ drawRectangleFilled(0, 175, 239, 210, COLOR_DARKERGRAY);
+ drawButton(20, 180, 200, 25, &dejaVuSans9ptFontInfo, 7, "Click For Text Entry", false);
+
+ // Wait for a valid touch event
+ // ---------------------------------------------------------------------
+ tsTouchData_t data;
+ tsTouchError_t error = -1;
+ bool success = false;
+ while(!success)
+ {
+ // Wait forever for a valid touch event to occur (ignoring faulty readings)
+ while (error)
+ {
+ // Only exit this loop when '0' is returned
+ error = tsWaitForEvent(&data, 0);
+ // printf("Error: %d X: %u Y: %u \r\n", error, data.x, data.y);
+ }
+
+ // Reset error to an error state in case we got a valid reading, but it's not
+ // within the expected range
+ error = -1;
+
+ // Check if the captured touch event is within the specified X/Y range
+ if (data.x > 20 && data.x < 220 && data.y > 180 && data.y < 205)
+ {
+ // Wait a few milliseconds then display the text input dialogue
+ systickDelay(100);
+ char* results = alphaShowDialogue();
+ // At this point, results contains the text from the dialogue ...
+ // clear the screen and show the results
+ drawFill(COLOR_WHITE);
+ drawString(10, 10, COLOR_BLACK, &dejaVuSans9ptFontInfo, "You Entered:");
+ drawString(10, 30, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, results);
+ drawString(10, 155, COLOR_BLACK, &dejaVuSans9ptFontInfo, "Thanks ... starting blinky!");
+ // Setting success to true allow the code to move in to blinky
+ success = true;
+ }
+ }
+
+ uint32_t currentSecond, lastSecond;
+ currentSecond = lastSecond = 0;
+
+ while (1)
+ {
+ // Toggle LED once per second ... rollover = 136 years :)
+ currentSecond = systickGetSecondsActive();
+ if (currentSecond != lastSecond)
+ {
+ lastSecond = currentSecond;
+ if (gpioGetValue(CFG_LED_PORT, CFG_LED_PIN) == CFG_LED_OFF)
+ {
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_ON);
+ }
+ else
+ {
+ gpioSetValue (CFG_LED_PORT, CFG_LED_PIN, CFG_LED_OFF);
+ }
+ }
+ }
+
+ return 0;
+}
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2011, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+#include "core/adc/adc.h"
+#include "core/systick/systick.h"
+
+#include "drivers/lcd/tft/lcd.h"
+#include "drivers/lcd/tft/drawing.h"
+#include "drivers/lcd/tft/touchscreen.h"
+#include "drivers/lcd/tft/fonts/dejavusans9.h"
+#include "drivers/lcd/tft/fonts/dejavusansbold9.h"
+
+static uint8_t adcBuffer[10] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+static uint8_t digBuffer[10] = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
+
+bool adcEnabled = true;
+bool digEnabled = false;
+
+/**************************************************************************/
+/*!
+ Renders the frame around the data grid
+*/
+/**************************************************************************/
+void renderLCDFrame(void)
+{
+ // Clear the screen
+ drawFill(COLOR_DARKGRAY);
+
+ // Render V references
+ drawString(245, 27, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, "3.5V");
+ drawString(244, 26, COLOR_WHITE, &dejaVuSansBold9ptFontInfo, "3.5V");
+ drawString(245, 195, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, "0.0V");
+ drawString(244, 194, COLOR_WHITE, &dejaVuSansBold9ptFontInfo, "0.0V");
+
+ // Div settings
+ drawString( 10, 10, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, "~100ms/Div");
+ drawString( 9, 9, COLOR_WHITE, &dejaVuSansBold9ptFontInfo, "~100ms/Div");
+ drawString( 95, 10, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, "500mV/Div");
+ drawString( 94, 9, COLOR_WHITE, &dejaVuSansBold9ptFontInfo, "500mV/Div");
+
+ // Clear the ADC output level just in case
+ drawRectangleFilled(175, 5, 250, 18, COLOR_DARKGRAY);
+
+ // Render the channel text
+ drawString( 25, 220, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, "P1.4 (Analog)");
+ drawString( 24, 219, adcEnabled ? COLOR_YELLOW : COLOR_MEDIUMGRAY, &dejaVuSansBold9ptFontInfo, "P1.4 (Analog)");
+ drawString(135, 220, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, "P2.0 (Digital)");
+ drawString(134, 219, digEnabled ? COLOR_GREEN : COLOR_MEDIUMGRAY, &dejaVuSansBold9ptFontInfo, "P2.0 (Digital)");
+
+ // ADC Warning
+ drawString(245, 80, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, "Warning:");
+ drawString(244, 79, COLOR_WHITE, &dejaVuSansBold9ptFontInfo, "Warning:");
+ drawString(244, 95, COLOR_WHITE, &dejaVuSans9ptFontInfo, "ADC input");
+ drawString(244, 110, COLOR_WHITE, &dejaVuSans9ptFontInfo, "is not 5.0V");
+ drawString(244, 125, COLOR_WHITE, &dejaVuSans9ptFontInfo, "tolerant!");
+}
+
+/**************************************************************************/
+/*!
+ Converts the supplied 8-bit value to an approximate pixel height in
+ the data grid
+*/
+/**************************************************************************/
+uint16_t adcValToPixel(uint8_t value)
+{
+ // Since the chart is 175 pixels high and 3.3V is at
+ // approximately 165 pixels height, we need to
+ // divide the 8 bit ADC readings by 1.545 (255/165)
+ // using fixed point math, and then substract
+ // the number from the bottom of the frame
+ uint16_t pixel = 0;
+ pixel = 200 - (value * 1000 / 1545);
+ return pixel;
+}
+
+/**************************************************************************/
+/*!
+ Redraws the grid and renders the data points on the LCD
+*/
+/**************************************************************************/
+void renderLCDGrid(void)
+{
+ if ((!adcEnabled) && (!digEnabled))
+ {
+ return;
+ }
+
+ // Redraw the grid
+ drawRectangle(9, 24, 236, 201, COLOR_LIGHTGRAY);
+ drawRectangleFilled(10, 25, 235, 200, COLOR_BLACK);
+
+ // Horizontal lines
+ drawLine(10, 50, 235, 50, COLOR_DARKERGRAY);
+ drawLine(10, 75, 235, 75, COLOR_DARKERGRAY);
+ drawLine(10, 100, 235, 100, COLOR_DARKERGRAY);
+ drawLine(10, 125, 235, 125, COLOR_DARKERGRAY);
+ drawLine(10, 150, 235, 150, COLOR_DARKERGRAY);
+ drawLine(10, 175, 235, 175, COLOR_DARKERGRAY);
+
+ // Vertical lines
+ drawLine( 35, 25, 35, 200, COLOR_DARKERGRAY);
+ drawLine( 60, 25, 60, 200, COLOR_DARKERGRAY);
+ drawLine( 85, 25, 85, 200, COLOR_DARKERGRAY);
+ drawLine(110, 25, 110, 200, COLOR_DARKERGRAY);
+ drawLine(135, 25, 135, 200, COLOR_DARKERGRAY);
+ drawLine(160, 25, 160, 200, COLOR_DARKERGRAY);
+ drawLine(185, 25, 185, 200, COLOR_DARKERGRAY);
+ drawLine(210, 25, 210, 200, COLOR_DARKERGRAY);
+
+ // Render the individual data points
+ uint32_t counter;
+ for (counter = 0; counter < 9; counter++)
+ {
+ // Draw historical data
+ uint32_t arrayPosition = 9 - counter;
+
+ // Draw analog data points (Yellow)
+ if (adcEnabled)
+ {
+ drawLine(10 + counter * 25, adcValToPixel(adcBuffer[arrayPosition]), 10 + (counter + 1) * 25, adcValToPixel(adcBuffer[arrayPosition - 1]), COLOR_YELLOW);
+ }
+
+ // Draw digital data points (Green)
+ if (digEnabled)
+ {
+ drawLine(10 + counter * 25, adcValToPixel(digBuffer[arrayPosition]), 10 + (counter + 1) * 25, adcValToPixel(digBuffer[arrayPosition - 1]), COLOR_GREEN);
+ }
+ }
+
+ // Render ADC value in text if present
+ if (adcEnabled)
+ {
+ char text[10];
+ // Assuming 3.3V supply and 8-bit ADC values, 1 unit = 12.89mV (3300/256)
+ sprintf(text, "%u.%u V", ((adcBuffer[0] * 1289) / 100) / 1000, ((adcBuffer[0] * 1294) / 100) % 1000);
+ // Clear the previous text
+ drawRectangleFilled(175, 5, 250, 18, COLOR_DARKGRAY);
+ // Render the latest value in mV
+ drawString(180, 10, COLOR_BLACK, &dejaVuSansBold9ptFontInfo, text);
+ drawString(179, 9, COLOR_YELLOW, &dejaVuSansBold9ptFontInfo, text);
+ }
+}
+
+/**************************************************************************/
+/*!
+ Shifts the buffer contents right one byte, and inserts the latest
+ value at the beginning.
+*/
+/**************************************************************************/
+void addToBuffer(uint8_t *buffer, uint8_t value)
+{
+ uint32_t counter;
+ for (counter = 9; counter > 0; counter--)
+ {
+ buffer[counter] = buffer[counter - 1];
+ }
+
+ // Append the latest value
+ buffer[0] = value;
+}
+
+/**************************************************************************/
+/*!
+ Main program entry point. After reset, normal code execution will
+ begin here.
+*/
+/**************************************************************************/
+int main(void)
+{
+ #if !defined CFG_TFTLCD
+ #error "CFG_TFTLCD must be enabled in projectconfig.h for this test"
+ #endif
+ #if defined CFG_INTERFACE
+ #error "CFG_INTERFACE must be disabled in projectconfig.h for this test (to save space)"
+ #endif
+
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ /* Set P2.0 to GPIO input (just in case) */
+ gpioSetDir(2, 0, 0);
+
+ /* Set P1.4/AD5 to analog input (only AD0..3 are configured by adcInit) */
+ IOCON_PIO1_4 &= ~(IOCON_PIO1_4_ADMODE_MASK |
+ IOCON_PIO1_4_FUNC_MASK |
+ IOCON_PIO1_4_MODE_MASK);
+ IOCON_PIO1_4 |= (IOCON_PIO1_4_FUNC_AD5 &
+ IOCON_PIO1_4_ADMODE_ANALOG);
+
+ // Rotate the screen and render the area around the data grid
+ lcdSetOrientation(LCD_ORIENTATION_LANDSCAPE);
+ renderLCDFrame();
+
+ tsTouchData_t touch;
+
+ // Start reading
+ while (1)
+ {
+ // Wait up to 5ms for a touch event
+ tsTouchError_t error = tsWaitForEvent(&touch, 5);
+ if (!error)
+ {
+ if (touch.x > 25 && touch.x < 100 && touch.y > 210)
+ {
+ // Analog switch selected
+ adcEnabled = adcEnabled ? false : true;
+ }
+ if (touch.x > 125 && touch.x < 200 && touch.y > 210)
+ {
+ // Digital switch selected
+ digEnabled = digEnabled ? false : true;
+ }
+ // Refresh the frame
+ renderLCDFrame();
+ }
+
+ // Read pins
+ if (adcEnabled)
+ addToBuffer(adcBuffer, adcRead(5) / 4); // 10-bit value converted to 8-bits
+ if (digEnabled)
+ addToBuffer(digBuffer, gpioGetValue(2, 0) ? 0xFF : 0x00);
+
+ // Update the LCD is required
+ renderLCDGrid();
+
+ // Note, this will actually mean the timing is ~100mS + the amount of
+ // time it took to get the readings and update the LCD
+ // A timer interrupt could be used to get much more accurate results,
+ // filling the buffer inside the IRQ and rendering the screen updates
+ // every x milliseconds
+ systickDelay(100);
+ }
+
+ return 0;
+}
--- /dev/null
+OVERVIEW
+============================================================
+This examples simulates a very crude oscilloscope, and
+reads the values on an analog input pin (P1.4/Wakeup, which
+can be configured as AD5) as well as a digital pin (P2.0).
+The digital pin will simply be displayed as 'High' (3.3V)
+or 'Low' (0V/GND).
+
+The last 10 readings are rendered in a data grid on the LCD,
+with new readings added approximately every 100ms.
+
+This sample demonstrates the following features
+============================================================
+
+- Rotating the LCD orientation
+- Rendering text with different colors and fonts
+- Using the touch screen to enable or disable a feature
+
+WARNING
+============================================================
+Please note that the ADC pins on the LPC1343 are NOT 5.0V
+tolerant. Supply more than 3.3V to an ADC pin will
+permanently damage the MCU. Digital I/O pins are 5.0V
+tolerant and can safely test 5.0V logic.
+
+Pin Usage
+============================================================
+This examples is based on the LPC1343 TFT LCD Stand-Alone
+board, which has a very limited number of pins broken out.
+P1.4 can be configure as GPIO, but also as WAKEUP and AD5.
+
+This pin is also available on the LPC1343 Reference Design
+Base Base and is marked as WAKEUP on the PCB, but it has
+a 10K pullup on it to allow the pin to function as a WAKEUP
+source.
+
+For details on the differences between these boards, see
+the schematics available in the ~/tools/schematics folder.
\ No newline at end of file
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2011, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/gpio/gpio.h"
+#include "core/adc/adc.h"
+#include "core/systick/systick.h"
+
+#include "drivers/lcd/tft/lcd.h"
+#include "drivers/lcd/tft/drawing.h"
+#include "drivers/lcd/tft/touchscreen.h"
+#include "drivers/lcd/tft/fonts/dejavusans9.h"
+#include "drivers/lcd/tft/fonts/dejavusansbold9.h"
+
+/**************************************************************************/
+/*!
+ Main program entry point. After reset, normal code execution will
+ begin here.
+*/
+/**************************************************************************/
+int main(void)
+{
+ #if !defined CFG_TFTLCD
+ #error "CFG_TFTLCD must be enabled in projectconfig.h for this test"
+ #endif
+
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ tsTouchData_t touch;
+ tsTouchError_t error;
+
+ // Start reading
+ while (1)
+ {
+ // Wait for a valid touch event
+ error = tsWaitForEvent(&touch, 0);
+ if (!error)
+ {
+ drawCircleFilled(touch.xlcd, touch.ylcd, 2, COLOR_WHITE);
+ }
+ }
+
+ return 0;
+}
--- /dev/null
+OVERVIEW
+============================================================
+This example continually samples the touch screen and
+whenever a valid reading occurs draws a pixel at the
+corresponding X/Y position.
+
+This sample demonstrates the following features
+============================================================
+
+- Waiting for a valid TS reading (ignoring X/Y mismatches)
+- Getting the X/Y position from TS events
--- /dev/null
+This folder contains various examples showing how to use the LPC1343 to
+accomplish certain tasks or how to use it with external devices, such as
+communicating with the PC using USB HID, etc.
+
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2010, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdio.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "drivers/sensors/pn532/pn532.h"
+#include "drivers/sensors/pn532/pn532_drvr.h"
+
+/**************************************************************************/
+/*!
+ Main program entry point. After reset, normal code execution will
+ begin here.
+
+ Note: CFG_INTERFACE is normally enabled by default. If you wish to
+ enable the blinking LED code in main, you will need to open
+ projectconfig.h, comment out "#define CFG_INTERFACE" and
+ rebuild the project.
+*/
+/**************************************************************************/
+int main (void)
+{
+ #ifdef CFG_INTERFACE
+ #error "CFG_INTERFACE must be disabled in projectconfig.h for this demo"
+ #endif
+ #if !defined CFG_PRINTF_USBCDC
+ #error "CFG_PRINTF_USBCDC must be enabled in projectconfig.h for this demo"
+ #endif
+
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ // Wait 5 second for someone to open the USB connection for printf
+ systickDelay(5000);
+
+ // Initialise the PN532
+ pn532Init();
+
+ byte_t response[256];
+ size_t responseLen;
+ pn532_error_t error;
+
+ // Setup command to initialise a single ISO14443A target at 106kbps
+ byte_t abtCommand[] = { PN532_COMMAND_INLISTPASSIVETARGET, 0x01, PN532_MODULATION_ISO14443A_106KBPS };
+
+ while (1)
+ {
+ printf("%s", CFG_PRINTF_NEWLINE);
+ printf("Wait for an ISO14443A card (Mifare Classic, etc.)%s", CFG_PRINTF_NEWLINE);
+
+ // Send the command
+ error = pn532Write(abtCommand, sizeof(abtCommand));
+
+ // Wait until we get a response or an unexpected error message
+ do
+ {
+ error = pn532Read(response, &responseLen);
+ systickDelay(25);
+ }
+ #ifdef PN532_UART
+ while (error == PN532_ERROR_RESPONSEBUFFEREMPTY);
+ #endif
+ #ifdef PN532_SPI
+ while ((error == PN532_ERROR_RESPONSEBUFFEREMPTY) || (error = PN532_ERROR_SPIREADYSTATUSTIMEOUT));
+ #endif
+
+ // Print the card details if possible
+ if (!error)
+ {
+ /* Response for ISO14443A 106KBPS (Mifare Classic, etc.)
+ See UM0701-02 section 7.3.5 for more information
+
+ byte Description
+ ------------- ------------------------------------------
+ b7 Tags Found
+ b8 Tag Number (only one used in this example)
+ b9..10 SENS_RES
+ b11 SEL_RES
+ b12 NFCID Length
+ b13..NFCIDLen NFCID
+
+ SENS_RES SEL_RES Manufacturer/Card Type NFCID Len
+ -------- ------- ----------------------- ---------
+ 00 04 08 NXP Mifare Classic 1K 4 bytes */
+
+ printf("%s", CFG_PRINTF_NEWLINE);
+ printf("%-12s: %d %s", "Tags Found", response[7], CFG_PRINTF_NEWLINE);
+ printf("%-12s: %02X %02X %s", "SENS_RES", response[9], response[10], CFG_PRINTF_NEWLINE);
+ printf("%-12s: %02X %s", "SEL_RES", response[11], CFG_PRINTF_NEWLINE);
+ printf("%-12s: ", "NFCID");
+ size_t pos;
+ for (pos=0; pos < response[12]; pos++)
+ {
+ printf("%02x ", response[13 + pos]);
+ }
+ printf(CFG_PRINTF_NEWLINE);
+ }
+ else
+ {
+ // Oops .... something bad happened. Check 'error'
+ printf("Ooops! Error %02X %s", error, CFG_PRINTF_NEWLINE);
+ }
+
+ // Wait at least one second before trying again
+ systickDelay(1000);
+ }
+}
--- /dev/null
+OVERVIEW
+============================================================
+This example will wait for an ISO14443A card to enter
+the RF field, and then try to determine the specific card
+model (SENS_RES and SEL_RES) as well as the card's NFCID.
+
+All information will be sent to USBCDC by default, with the
+PN532 breakout board connected via UART.
+
+HOW TO USE THIS EXAMPLE
+============================================================
+1.) Connect the PN532 NFC Breakout Board to UART on the
+ LPC1343 as follows:
+
+ PN532 LPC1343
+ ----- -------
+ GND GND
+ TXD RXD
+ RXD TXD
+ 3.3V 3.3V
+
+2.) Configure your terminal software to open the USB COM
+ port at 115K.
+
+3.) When the application starts, there is a 5 second delay
+ (to allow you time to connect via USB CDC), after which
+ point the device will wait for a single ISO14443A card
+ (Mifare Classic, etc.) and try to read it's ID. Once a
+ card is found, the reader will start looking again for a
+ card after a 1 second delay.
--- /dev/null
+/**************************************************************************/
+/*!
+ @file main.c
+ @author K. Townsend (microBuilder.eu)
+
+ @section LICENSE
+
+ Software License Agreement (BSD License)
+
+ Copyright (c) 2011, microBuilder SARL
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the copyright holders nor the
+ names of its contributors may be used to endorse or promote products
+ derived from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
+ DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+/**************************************************************************/
+#include <stdlib.h>
+
+#include "projectconfig.h"
+#include "sysinit.h"
+
+#include "core/systick/systick.h"
+#include "drivers/sensors/tsl2561/tsl2561.h"
+
+/**************************************************************************/
+/*!
+ Main program entry point. After reset, normal code execution will
+ begin here.
+*/
+/**************************************************************************/
+int main(void)
+{
+ // Configure cpu and mandatory peripherals
+ systemInit();
+
+ uint16_t lumMixed, lumInfrared;
+
+ while (1)
+ {
+ // Read mixed and infrared luminosity from tsl2561
+ tsl2561GetLuminosity(&lumMixed, &lumInfrared);
+
+ // Display the readings
+ printf("Luminosity: \r\n Broadband (Visible + IR) - %d \r\n Infrared - %d \r\n", lumMixed, lumInfrared);
+
+ // Wait 1 second between reading
+ systickDelay(1000);
+ }
+
+ return 0;
+}
--- /dev/null
+Reads the mixed (visible + UV) and UV only luminosity levels
+using the TSL2561 digital light sensor.
\ No newline at end of file
--- /dev/null
+CC = gcc
+LD = gcc
+LDFLAGS = -Wall -O4 -std=c99
+EXES = lpcrc
+
+all: $(EXES)
+
+% : %.c
+ $(LD) $(LDFLAGS) -o $@ $<
+
+clean:
+ rm -f $(EXES)
--- /dev/null
+/*
+ * Software License Agreement (BSD License)
+ *
+ * Copyright (c) 2010, Roel Verdult
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holders nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+
+#define BLOCK_COUNT 7
+#define BLOCK_LENGTH 4
+#define BLOCK_TOTAL (BLOCK_COUNT*BLOCK_LENGTH)
+
+typedef unsigned char byte_t;
+
+int main(int argc, char *argv[])
+{
+ FILE* pf;
+ byte_t buf[BLOCK_TOTAL];
+ uint32_t crc = 0;
+ uint32_t block;
+
+ // Check for required arguments
+ if (argc < 2)
+ {
+ printf("syntax: lpcrc <firmware.bin>\n");
+ return 1;
+ }
+
+ // Try to open the supplied firmware
+ if ((pf = fopen(argv[1],"rb+")) == NULL)
+ {
+ printf("error: could not open file [%s] with write access\n",argv[1]);
+ return 1;
+ }
+
+ // Read out the data blocks used for crc calculation
+ if (fread(buf,1,BLOCK_TOTAL,pf) != BLOCK_TOTAL)
+ {
+ printf("error: could not read required bytes\n");
+ fclose(pf);
+ return 1;
+ }
+
+ // Compute the crc value
+ for (block=0; block<BLOCK_COUNT; block++)
+ {
+ crc += *((uint32_t*)(buf+(block*BLOCK_LENGTH)));
+ }
+ crc = (~crc) + 1;
+
+ // Reposition the file stream indicator to switch between read and write
+ if (fseek(pf,0,SEEK_CUR) != 0)
+ {
+ printf("error: could not switch from read to write mode\n");
+ fclose(pf);
+ return 1;
+ }
+
+ // Write the crc back to the file
+ if (fwrite((byte_t*)&crc,1,BLOCK_LENGTH,pf) != BLOCK_LENGTH)
+ {
+ printf("error: could not write crc back to file\n");
+ fclose(pf);
+ return 1;
+ }
+
+ printf("succesfully updated crc to: %08x\n",crc);
+ fclose(pf);
+
+ return 0;
+}
+
--- /dev/null
+This folder contains a number of tools that may be useful when developing with
+the LPC1343 Reference Board:
+
+
+===============================================================================
+ /dotfactory
+ -----------------------------------------------------------------------------
+ An open-source (GPL) Windows-based program to convert TTF fonts to .c
+ source files. This application is included here for convenience sake and
+ can be used to convert TTF fonts for use with the TFT LCD display with
+ minor modifications to the generated source files. See the existing fonts
+ in 'drivers/lcd/tft/fonts' for an example.
+===============================================================================
+
+
+===============================================================================
+ /examples
+ -----------------------------------------------------------------------------
+ Example software showing how to use the LPC1343 to accomplish certain tasks
+ or how to use it with external devices, such as communicating with the PC
+ using USB HID, etc.
+===============================================================================
+
+
+===============================================================================
+ /lpcrc
+ -----------------------------------------------------------------------------
+ This utility fixes the CRC of any .bin files generated with GCC from the
+ command line. You must use this utility to patch any compiled firmware that
+ will be deployed via the USB bootloader.
+
+ The GCC src is included in the root folder and should build on any platform
+ where a native GCC toolchain is available. A pre=compiled windows binary is
+ included in /bin for convenience sake, as well as in the root folder of the
+ LPC1343 Code Base.
+
+ If you are using the provided CodeLite project files, lpcrc will
+ automatically be executed after every build. You only need to run lpcrc if
+ you are building directly from the command=line.
+===============================================================================
+
+
+===============================================================================
+ /schematics
+ -----------------------------------------------------------------------------
+ Schematics showing the pin connections that are assumed to be used by the
+ LPC1343 Code Base.
+===============================================================================
+
+
+===============================================================================
+ /testfirmware
+ -----------------------------------------------------------------------------
+ Various pre-compiled binaires files that can be used to test the
+ functionality of the LPC1343. This firmware assumes that the board follows
+ the layout show in 'tools/schematics'
+===============================================================================
+
+
--- /dev/null
+
+CC = gcc
+CFLAGS = -c
+SOURCES = main.c
+OBJECTS = $(SOURCES:.c=.o)
+EXE = wsbridge
+
+all: $(SOURCES) $(EXE)
+
+$(EXE): $(OBJECTS)
+ $(CC) $(OBJECTS) -o $@
+
+%.o:%.c
+ $(CC) $(CFLAGS) $< -o $@
+
+clean:
+ rm *.o
--- /dev/null
+/*******************************************************************
+ Copyright (C) 2009 FreakLabs
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. Neither the name of the the copyright holder nor the names of its contributors
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND
+ ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ SUCH DAMAGE.
+
+ Originally written by Christopher Wang aka Akiba.
+ Please post support questions to the FreakLabs forum.
+
+*******************************************************************/
+/*!
+ FreakLabs Freakduino/Wireshark Bridge
+
+ This program allows data from the Freakduino to be piped into wireshark.
+ When the sniffer firmware is loaded into the Freakduino, then the Freakduino
+ will be in promiscuous mode and will just dump any frames it sees. This
+ program takes the frame dump and sends it into Wireshark for analysis. The
+ global header is already set up to inform wireshark that the link layer for
+ all frames will be in IEEE 802.15.4 format. After that, it is up to the user
+ to choose any higher layer protocols to decode above 802.15.4 via the
+ wireshark "enable protocols" menu.
+*/
+/**************************************************************************/
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <time.h>
+#include <stdint.h>
+#include <signal.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <termios.h>
+
+#define PORTBUFSIZE 32
+#define BUFSIZE 1024
+#define PACKET_FCS 2
+#define DEBUG 1
+#define PIPENAME "/tmp/wireshark"
+#define BAUDRATE B115200
+
+enum FSM
+{
+ START_CAPTURE,
+ PACKET_CAPTURE
+};
+
+static int FD_pipe = -1;
+static int FD_com = -1;
+static uint8_t port_buf[PORTBUFSIZE];
+static uint8_t circ_buf[BUFSIZE];
+static uint16_t rd_idx = 0;
+static uint16_t wr_idx = 0;
+static uint8_t len;
+static uint8_t state = START_CAPTURE;
+static uint8_t file_write = 0;
+
+/**************************************************************************/
+/*!
+ Open the serial port that we'll be communicating with the Freakduino (sniffer)
+ through.
+*/
+/**************************************************************************/
+static int serial_open(char *portname)
+{
+ int FD_com; // file descriptor for the serial port
+ struct termios term;
+
+ FD_com = open(portname, O_RDONLY | O_NOCTTY | O_NDELAY);
+
+ if(FD_com == -1) // if open is unsucessful
+ {
+ printf("serial_open: Unable to open %s.\n", portname);
+ }
+ else
+ {
+ // set speed of port
+ cfsetspeed(&term, BAUDRATE);
+
+ // set to 8-bits, no parity, 1 stop bit
+ term.c_cflag &= ~PARENB;
+ term.c_cflag &= ~CSTOPB;
+ term.c_cflag &= ~CSIZE;
+ term.c_cflag |= CS8;
+
+ term.c_cflag |= (CLOCAL | CREAD);
+ tcsetattr(FD_com, TCSANOW, &term);
+ }
+ return(FD_com);
+}
+
+/**************************************************************************/
+/*!
+ Create the named pipe that we will be communicating with wireshark through.
+*/
+/**************************************************************************/
+static void named_pipe_create(char *name)
+{
+ int rv = 0;
+ rv = mkfifo(name, 0666);
+ if ((rv == -1) && (errno != EEXIST))
+ {
+ perror("Error creating named pipe");
+ exit(1);
+ }
+
+ FD_pipe = open(name, O_WRONLY);
+
+ if (FD_pipe == -1)
+ {
+ perror("Error connecting to named pipe");
+ exit(1);
+ }
+}
+
+/**************************************************************************/
+/*!
+ Write data to the pipe
+*/
+/**************************************************************************/
+size_t data_write(const void *ptr, size_t size)
+{
+ ssize_t bytes = 0;
+ if (FD_pipe != -1)
+ {
+ bytes = write(FD_pipe, ptr, size);
+ }
+}
+
+/**************************************************************************/
+/*!
+ Write the global header to wireshark. This is only done once at the
+ beginning of the capture.
+*/
+/**************************************************************************/
+static void write_global_hdr()
+{
+ uint32_t magic_number = 0xa1b2c3d4; /* magic number */
+ uint16_t version_major = 2; /* major version number */
+ uint16_t version_minor = 4; /* minor version number */
+ int32_t thiszone = 0; /* GMT to local correction */
+ uint32_t sigfigs = 0; /* accuracy of timestamps */
+ uint32_t snaplen = 65535; /* max length of captured packets, in octets */
+ uint32_t network = 195; /* data link type (DLT) - IEEE 802.15.4 */
+
+ data_write(&magic_number, sizeof(magic_number));
+ data_write(&version_major, sizeof(version_major));
+ data_write(&version_minor, sizeof(version_minor));
+ data_write(&thiszone, sizeof(thiszone));
+ data_write(&sigfigs, sizeof(sigfigs));
+ data_write(&snaplen, sizeof(snaplen));
+ data_write(&network, sizeof(network));
+}
+
+/**************************************************************************/
+/*!
+ Write the frame header into wireshark. This is required for the libpcap
+ format and informs wireshark that a new frame is coming.
+*/
+/**************************************************************************/
+static void write_frame_hdr(uint8_t len)
+{
+ uint32_t ts_sec; /* timestamp seconds */
+ uint32_t ts_usec; /* timestamp microseconds */
+ uint32_t incl_len; /* number of octets of packet saved in file */
+ uint32_t orig_len; /* actual length of packet */
+ struct timeval tv;
+
+ gettimeofday(&tv, NULL);
+ ts_sec = tv.tv_sec;
+ ts_usec = tv.tv_usec;
+ incl_len = len;
+ orig_len = len + PACKET_FCS;
+
+ data_write(&ts_sec, sizeof(ts_sec));
+ data_write(&ts_usec, sizeof(ts_usec));
+ data_write(&incl_len, sizeof(incl_len));
+ data_write(&orig_len, sizeof(orig_len));
+}
+
+/**************************************************************************/
+/*!
+ Write one frame into wireshark (via the pipe).
+*/
+/**************************************************************************/
+static void write_frame(uint8_t frame_len)
+{
+ uint8_t i;
+
+ // actual frame length for wireshark should not include FCS
+ frame_len -= PACKET_FCS;
+
+ // write header to inform WS that new frame has arrived
+ write_frame_hdr(frame_len);
+
+ // bump rd_idx. we don't want to write the length byte
+ rd_idx = (rd_idx + 1) % BUFSIZE;
+
+ // write frame into wireshark
+ for (i=0; i<frame_len; i++)
+ {
+ data_write(&circ_buf[rd_idx], 1);
+ rd_idx = (rd_idx + 1) % BUFSIZE;
+ }
+
+ // bump rd_idx. we're not using the trailing FCS value
+ rd_idx = (rd_idx + 1) % BUFSIZE;
+}
+
+/**************************************************************************/
+/*!
+ Calculate total number of bytes in buffer.
+*/
+/**************************************************************************/
+static uint16_t calc_bytes_in_buf()
+{
+ if (rd_idx > wr_idx)
+ {
+ // read index is greater than write. we must have wrapped around
+ return (BUFSIZE - (rd_idx - wr_idx));
+ }
+ else
+ {
+ return (wr_idx - rd_idx);
+ }
+}
+
+/**************************************************************************/
+/*!
+ Deal with any received signals. This includes ctrl-C to stop the program.
+*/
+/**************************************************************************/
+static void sig_int(int signo)
+{
+ (void) signo;
+ if (FD_pipe != -1)
+ {
+ printf("\nClosing pipe.\n");
+ close(FD_pipe);
+ }
+
+ if (FD_com != -1)
+ {
+ printf("\nClosing serial port.\n");
+ close(FD_com);
+ }
+
+ printf("\nSignal captured and devices shut down.\n");
+
+ exit(0);
+}
+
+/**************************************************************************/
+/*!
+ Init the signals we'll be checking for.
+*/
+/**************************************************************************/
+static void signal_init(void)
+{
+ signal(SIGINT, sig_int);
+ signal(SIGHUP, sig_int);
+ signal(SIGTERM, sig_int);
+}
+
+/**************************************************************************/
+/*!
+ Here's the meat of the code.
+*/
+/**************************************************************************/
+int main(int argc, char *argv[])
+{
+ int nbytes;
+ uint8_t i;
+
+ // capture any signals that will terminate program
+ signal_init();
+
+ // make sure the COM port is specified
+ if (argc == 2)
+ {
+ // open the COM port
+ if ((FD_com = serial_open(argv[1])) == -1)
+ {
+ printf("Serial port not opened.\n");
+ return 0;
+ }
+ else
+ {
+ printf("Serial port connected. Waiting for wireshark connection.\n");
+ printf("Open wireshark and connect to local interface: %s\n", PIPENAME);
+ }
+ }
+ else
+ {
+ printf("Usage: wsbridge <portname>.\n");
+ return 0;
+ }
+
+
+ // create and open pipe for wireshark
+ named_pipe_create(PIPENAME);
+
+ // wait for wireshark to connect to pipe. Once wireshark
+ // connects, then the global header will be written to it.
+ if (FD_pipe != -1)
+ {
+ write_global_hdr();
+ printf("Client connected to pipe.\n");
+ }
+
+ for (;;)
+ {
+ uint16_t bytes_in_buf;
+ uint8_t frame_len, byte_ctr;
+
+ // wait for data to come in on the serial port
+ if ((nbytes = read(FD_com, port_buf, PORTBUFSIZE)) > 0)
+ {
+ // write data to circular buffer. loop through all received bytes
+ for (i=0; i<nbytes; i++)
+ {
+ switch (state)
+ {
+ case START_CAPTURE:
+ // new frame starting
+ len = port_buf[i];
+ byte_ctr = 0;
+
+ printf("Len = %02X.\n", len);
+
+ circ_buf[wr_idx] = len;
+ wr_idx = (wr_idx + 1) % BUFSIZE;
+ state = PACKET_CAPTURE;
+ break;
+
+
+ case PACKET_CAPTURE:
+ // continue capturing bytes until end of frame
+
+ // write data to circular buffer and increment index
+ circ_buf[wr_idx] = port_buf[i];
+
+ printf("%02X ", circ_buf[wr_idx]);
+
+ wr_idx = (wr_idx + 1) % BUFSIZE;
+
+ // track number of received bytes. when received bytes
+ // equals frame length, then restart state machine and
+ // write bytes to wireshark
+ byte_ctr++;
+ if (byte_ctr == (len - 1))
+ {
+ state = START_CAPTURE;
+ file_write = 1;
+ printf("\n");
+ }
+ break;
+ }
+ fflush(stdout);
+ }
+
+ // at least one frame has been written. loop through circular buffer
+ // and write out all completed frames
+ while (file_write)
+ {
+ // capture frame length and check buffer to see if one or more frames
+ // are available.
+ frame_len = circ_buf[rd_idx];
+ bytes_in_buf = calc_bytes_in_buf();
+
+ if (bytes_in_buf > frame_len)
+ {
+ // if more than one frame is available, then write one frame to
+ // wireshark and then see if any more are available.
+ write_frame(frame_len);
+ }
+ else if (bytes_in_buf == frame_len)
+ {
+ // only one frame is available. write to wireshark and then quit
+ // the loop
+ write_frame(frame_len);
+ file_write = 0;
+ }
+ else
+ {
+ // less than one frame is available. quit the loop and collect more
+ // bytes. we normally should not get here.
+ file_write = 0;
+ }
+ }
+ }
+ }
+}
+
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 10.00
+# Visual Studio 2008
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "wsbridge", "wsbridge\wsbridge.csproj", "{9CAFA529-8FF4-42D4-B6A6-54992B3BB40F}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Any CPU = Debug|Any CPU
+ Release|Any CPU = Release|Any CPU
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {9CAFA529-8FF4-42D4-B6A6-54992B3BB40F}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+ {9CAFA529-8FF4-42D4-B6A6-54992B3BB40F}.Debug|Any CPU.Build.0 = Debug|Any CPU
+ {9CAFA529-8FF4-42D4-B6A6-54992B3BB40F}.Release|Any CPU.ActiveCfg = Release|Any CPU
+ {9CAFA529-8FF4-42D4-B6A6-54992B3BB40F}.Release|Any CPU.Build.0 = Release|Any CPU
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+using System;
+using System.IO;
+using System.IO.Ports;
+using System.IO.Pipes;
+
+namespace wsbridge
+{
+ class Program
+ {
+ static NamedPipeServerStream wspipe;
+ static BinaryWriter ws;
+ static SerialPort p;
+ const uint BUFSIZE = 1024;
+ static byte[] b = new byte[BUFSIZE];
+ static uint wr_idx = 0;
+ static uint rd_idx = 0;
+ static byte len;
+ static FSM state;
+ static bool file_write = false;
+ static long start_time_in_ticks;
+ static byte byte_ctr;
+ static String port;
+
+ enum FSM
+ {
+ START_CAPTURE,
+ PACKET_CAPTURE
+ }
+
+ const int PACKET_FCS = 2;
+ const int PACKET_LEN = 1;
+ const bool DEBUG_PRINT = true;
+
+ static void Main(string[] args)
+ {
+ // Commane line options
+ if (args.Length == 0)
+ {
+ // generate list of active serial ports
+ string[] names = SerialPort.GetPortNames();
+ Console.WriteLine("Serial ports:");
+ foreach (string name in names) Console.WriteLine(name);
+ Console.Write("Choose one:");
+ port = Console.ReadLine();
+ }
+ else if (args.Length == 1)
+ {
+ port = args[0];
+ }
+ else
+ {
+ Console.WriteLine("Usage: wsbridge <portname>");
+ Console.WriteLine("or leave portname blank for a list of ports.");
+ Environment.Exit(0);
+ }
+
+ // Open serial port
+ try
+ {
+ p = new SerialPort(port, 115200, Parity.None, 8, StopBits.One);
+ p.Open();
+ }
+ catch (Exception e)
+ {
+ // ooops, serial port can't be opened. throw exception, print message, and exit
+ Console.WriteLine("Error opening serial port. Msg = " + e.Message);
+ Environment.Exit(0);
+ }
+ Console.WriteLine("Serial port opened successfully.");
+
+ // create pipe
+ try
+ {
+ wspipe = new NamedPipeServerStream("wireshark", PipeDirection.Out);
+ }
+ catch (Exception e)
+ {
+ Console.WriteLine("Error opening pipe. Msg = " + e.Message);
+ p.Close();
+ Environment.Exit(0);
+ }
+
+ // wait for wireshark to connect to pipe
+ Console.WriteLine("Waiting for connection to wireshark.");
+ Console.WriteLine("Open wireshark and connect to interface: Local:\\\\.\\pipe\\wireshark");
+ wspipe.WaitForConnection();
+ Console.WriteLine("Client connected.");
+
+ // connect binary writer to pipe to write binary data into it
+ ws = new BinaryWriter(wspipe);
+
+ // add serial data capture
+ p.DataReceived += new SerialDataReceivedEventHandler(serialPort_DataReceived);
+ state = FSM.START_CAPTURE;
+
+ // keep track of time started. this will be used for timestamps
+ start_time_in_ticks = DateTime.Now.Ticks;
+
+ // generate header to identify the packet capture
+ write_global_hdr();
+
+ // run forever
+ while (true)
+ {
+ }
+ }
+
+ // serial port handler. this gets executed whenever data is available on the serial port
+ static void serialPort_DataReceived(object sender, System.IO.Ports.SerialDataReceivedEventArgs e)
+ {
+ uint frame_len, bytes_in_buf;
+
+ // loop until serial port buffer is empty
+ while (p.BytesToRead != 0)
+ {
+ switch (state)
+ {
+ case FSM.START_CAPTURE:
+ // starting a new frame. the first byte will indicate the length
+ len = (byte)p.ReadByte();
+ b[wr_idx] = len;
+ byte_ctr = 0;
+
+ if (DEBUG_PRINT)
+ {
+ Console.WriteLine();
+ Console.Write(String.Format("{0,2:X}", b[wr_idx]) + ' ');
+ }
+
+ // increment the buffer index and wrap back to 0 if it reaches the max size
+ // (standard circular buffer behavior)
+ wr_idx = (wr_idx + 1) % BUFSIZE;
+ state = FSM.PACKET_CAPTURE;
+ break;
+
+ case FSM.PACKET_CAPTURE:
+ // capture bytes until the total length of the frame
+ b[wr_idx] = (byte)p.ReadByte();
+
+ if (DEBUG_PRINT)
+ {
+ Console.Write(String.Format("{0,2:X}", b[wr_idx]) + ' ');
+ }
+
+ wr_idx = (wr_idx + 1) % BUFSIZE;
+ byte_ctr++;
+
+ // we've captured all bytes in frame. tell the next section we're ready to write
+ // the frame into wireshark
+ if (byte_ctr == (len - 1))
+ {
+ state = FSM.START_CAPTURE;
+ file_write = true;
+ }
+ break;
+ }
+ }
+
+ // at least one frame has been captured. write it into wireshark
+ while (file_write == true)
+ {
+ frame_len = b[rd_idx];
+ bytes_in_buf = calc_bytes_in_buf();
+
+ // compare the frame lengto the number of bytes in the buffer. if the bytes in buffer are
+ // greater than the frame length, then we have more than one frame. loop through until
+ // all complete frames have been written to wireshark
+ if (bytes_in_buf > frame_len)
+ {
+ // more than one frame in buffer. don't indicate we're finished yet in case we have
+ // other frames we can send out.
+ write_frame(frame_len);
+ }
+ else if (bytes_in_buf == frame_len)
+ {
+ // only one frame in buffer. indicate we're finished after we write this frame out.
+ write_frame(frame_len);
+ file_write = false;
+ }
+ else
+ {
+ // what?! no frames in buffer? we shouldn't reach here.
+ file_write = false;
+ }
+ }
+ }
+
+ // return the number of bytes in the buffer
+ static uint calc_bytes_in_buf()
+ {
+ if (rd_idx > wr_idx)
+ {
+ // since we're using a circular buffer, its possible for the write index to be less
+ // than the read index if a wraparound occurred. handle this case here.
+ return (BUFSIZE - (rd_idx - wr_idx));
+ }
+ else
+ {
+ // normal way to calculate bytes in the buffer
+ return (wr_idx - rd_idx);
+ }
+ }
+
+ // this is the global header that starts any packet capture file. this will tell wireshark what
+ // kind of protocol it is (indicated by the DLT) as well as other information like endianness, etc.
+ static void write_global_hdr()
+ {
+ uint magic_num = 0xa1b2c3d4; // used for endianness
+ short version_major = 2; // version
+ short version_minor = 4; // version
+ int thiszone = 0; // zone (unused)
+ uint sigfigs = 0; // significant figures (unused)
+ uint snaplen = 65535; // snapshot length (max value)
+ uint network = 195; // Data Link Type (DLT): indicates link layer protocol
+
+ try
+ {
+ // write to wireshark pipe
+ ws.Write(magic_num);
+ ws.Write(version_major);
+ ws.Write(version_minor);
+ ws.Write(thiszone);
+ ws.Write(sigfigs);
+ ws.Write(snaplen);
+ ws.Write(network);
+ }
+ catch
+ {
+ Console.WriteLine("Pipe has been closed.");
+ close();
+ }
+ }
+
+ // this writes a frame header into wireshark in libpcap format. the format is simple and just
+ // requires a timestamp and length
+ static void write_frm_hdr(long sec, long usec, uint incl_len, uint orig_len)
+ {
+ try
+ {
+ // write to wireshark
+ ws.Write((uint)sec);
+ ws.Write((uint)usec);
+ ws.Write(incl_len);
+ ws.Write(orig_len);
+ }
+ catch
+ {
+ Console.WriteLine("Pipe has been closed.");
+ close();
+ }
+ }
+
+ // this writes a frame into wireshark. it calculates the timestamp and length and uses that
+ // for the frame header. it then writes captured bytes into wireshark
+ static void write_frame(uint frame_len)
+ {
+ uint incl_len, orig_len;
+ long sec, usec;
+
+ // generating timestamp. its kind of cheesy but there isn't a unix timestamp mechanism in win.
+ // just counting ticks from when program was started. each tick is 100 nsec.
+ long diff_in_ticks = DateTime.Now.Ticks - start_time_in_ticks; // get difference in ticks
+ sec = diff_in_ticks / TimeSpan.TicksPerSecond; // get seconds
+ diff_in_ticks -= (sec * TimeSpan.TicksPerSecond); // subtract off seconds from total
+ usec = diff_in_ticks / 10; // get usec
+
+ // calculate frame length. we won't be feeding frame checksum (FCS) into wireshark.
+ incl_len = (uint)frame_len - PACKET_FCS;
+ orig_len = frame_len;
+
+ // increment over the length byte. we won't feed that into wireshark either. it doesn't seem to like it.
+ rd_idx = (rd_idx + 1) % BUFSIZE;
+
+ // write frame header first
+ write_frm_hdr(sec, usec, incl_len, orig_len);
+
+ // loop through entire length and write data into wireshark
+ for (int i = 0; i < incl_len; i++)
+ {
+ try
+ {
+ ws.Write(b[rd_idx]);
+ }
+ catch
+ {
+ Console.WriteLine("Pipe has been closed.");
+ close();
+ }
+ rd_idx = (rd_idx + 1) % BUFSIZE;
+ }
+ rd_idx = (rd_idx + 1) % BUFSIZE;
+ }
+
+ // Received some type of termination. Close everything and wrap up.
+ static void close()
+ {
+ p.Close();
+ wspipe.Close();
+ ws.Close();
+ Console.WriteLine("Press <Enter> key to quit.");
+ Console.ReadLine();
+ Environment.Exit(0);
+ }
+ }
+}
--- /dev/null
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// General Information about an assembly is controlled through the following
+// set of attributes. Change these attribute values to modify the information
+// associated with an assembly.
+[assembly: AssemblyTitle("pcap")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("pcap")]
+[assembly: AssemblyCopyright("Copyright © 2010")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// Setting ComVisible to false makes the types in this assembly not visible
+// to COM components. If you need to access a type in this assembly from
+// COM, set the ComVisible attribute to true on that type.
+[assembly: ComVisible(false)]
+
+// The following GUID is for the ID of the typelib if this project is exposed to COM
+[assembly: Guid("75eb0967-9c50-430e-a562-d0f7bee8f2cc")]
+
+// Version information for an assembly consists of the following four values:
+//
+// Major Version
+// Minor Version
+// Build Number
+// Revision
+//
+// You can specify all the values or you can default the Build and Revision Numbers
+// by using the '*' as shown below:
+// [assembly: AssemblyVersion("1.0.*")]
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="3.5" DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+ <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+ <ProductVersion>9.0.21022</ProductVersion>
+ <SchemaVersion>2.0</SchemaVersion>
+ <ProjectGuid>{9CAFA529-8FF4-42D4-B6A6-54992B3BB40F}</ProjectGuid>
+ <OutputType>Exe</OutputType>
+ <AppDesignerFolder>Properties</AppDesignerFolder>
+ <RootNamespace>wsbridge</RootNamespace>
+ <AssemblyName>wsbridge</AssemblyName>
+ <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
+ <FileAlignment>512</FileAlignment>
+ <PublishUrl>publish\</PublishUrl>
+ <Install>true</Install>
+ <InstallFrom>Disk</InstallFrom>
+ <UpdateEnabled>false</UpdateEnabled>
+ <UpdateMode>Foreground</UpdateMode>
+ <UpdateInterval>7</UpdateInterval>
+ <UpdateIntervalUnits>Days</UpdateIntervalUnits>
+ <UpdatePeriodically>false</UpdatePeriodically>
+ <UpdateRequired>false</UpdateRequired>
+ <MapFileExtensions>true</MapFileExtensions>
+ <ApplicationRevision>0</ApplicationRevision>
+ <ApplicationVersion>1.0.0.%2a</ApplicationVersion>
+ <IsWebBootstrapper>false</IsWebBootstrapper>
+ <UseApplicationTrust>false</UseApplicationTrust>
+ <BootstrapperEnabled>true</BootstrapperEnabled>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+ <DebugSymbols>true</DebugSymbols>
+ <DebugType>full</DebugType>
+ <Optimize>false</Optimize>
+ <OutputPath>bin\Debug\</OutputPath>
+ <DefineConstants>DEBUG;TRACE</DefineConstants>
+ <ErrorReport>prompt</ErrorReport>
+ <WarningLevel>4</WarningLevel>
+ </PropertyGroup>
+ <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+ <DebugType>pdbonly</DebugType>
+ <Optimize>true</Optimize>
+ <OutputPath>bin\Release\</OutputPath>
+ <DefineConstants>TRACE</DefineConstants>
+ <ErrorReport>prompt</ErrorReport>
+ <WarningLevel>4</WarningLevel>
+ </PropertyGroup>
+ <ItemGroup>
+ <Reference Include="System" />
+ <Reference Include="System.Core">
+ <RequiredTargetFramework>3.5</RequiredTargetFramework>
+ </Reference>
+ <Reference Include="System.Xml.Linq">
+ <RequiredTargetFramework>3.5</RequiredTargetFramework>
+ </Reference>
+ <Reference Include="System.Data.DataSetExtensions">
+ <RequiredTargetFramework>3.5</RequiredTargetFramework>
+ </Reference>
+ <Reference Include="System.Data" />
+ <Reference Include="System.Xml" />
+ </ItemGroup>
+ <ItemGroup>
+ <Compile Include="Program.cs" />
+ <Compile Include="Properties\AssemblyInfo.cs" />
+ </ItemGroup>
+ <ItemGroup>
+ <BootstrapperPackage Include="Microsoft.Net.Framework.2.0">
+ <Visible>False</Visible>
+ <ProductName>.NET Framework 2.0 %28x86%29</ProductName>
+ <Install>false</Install>
+ </BootstrapperPackage>
+ <BootstrapperPackage Include="Microsoft.Net.Framework.3.0">
+ <Visible>False</Visible>
+ <ProductName>.NET Framework 3.0 %28x86%29</ProductName>
+ <Install>false</Install>
+ </BootstrapperPackage>
+ <BootstrapperPackage Include="Microsoft.Net.Framework.3.5">
+ <Visible>False</Visible>
+ <ProductName>.NET Framework 3.5</ProductName>
+ <Install>true</Install>
+ </BootstrapperPackage>
+ <BootstrapperPackage Include="Microsoft.Windows.Installer.3.1">
+ <Visible>False</Visible>
+ <ProductName>Windows Installer 3.1</ProductName>
+ <Install>true</Install>
+ </BootstrapperPackage>
+ </ItemGroup>
+ <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+ <!-- To modify your build process, add your task inside one of the targets below and uncomment it.
+ Other similar extension points exist, see Microsoft.Common.targets.
+ <Target Name="BeforeBuild">
+ </Target>
+ <Target Name="AfterBuild">
+ </Target>
+ -->
+</Project>
\ No newline at end of file
--- /dev/null
+<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <PropertyGroup>
+ <PublishUrlHistory>publish\</PublishUrlHistory>
+ <InstallUrlHistory>
+ </InstallUrlHistory>
+ <SupportUrlHistory>
+ </SupportUrlHistory>
+ <UpdateUrlHistory>
+ </UpdateUrlHistory>
+ <BootstrapperUrlHistory>
+ </BootstrapperUrlHistory>
+ <FallbackCulture>en-US</FallbackCulture>
+ <VerifyUploadedFiles>false</VerifyUploadedFiles>
+ </PropertyGroup>
+</Project>
\ No newline at end of file
projects / hackover2013-badge-firmware.git / commitdiff
