2 * Copyright (C) 2004 Manuel Novoa III <mjn3@codepoet.org>
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
12 * General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 * This is a hacked replacement for the 'trx' utility used to create
22 * wrt54g .trx firmware files. It isn't pretty, but it does the job
25 * As an extension, you can specify a larger maximum length for the
26 * .trx file using '-m'. It will be rounded up to be a multiple of 4K.
27 * NOTE: This space will be malloc()'d.
31 * Sigh... Make it endian-neutral.
33 * TODO: Support '-b' option to specify offsets for each file.
35 * February 19, 2005 - mbm
37 * Add -a (align offset) and -b (absolute offset)
39 * March 24, 2010 - markus
41 * extend trx header struct for new version
42 * assume v1 for as default
43 * Add option -2 to allow v2 header
54 #if __BYTE_ORDER == __BIG_ENDIAN
55 #define STORE32_LE(X) bswap_32(X)
56 #define LOAD32_LE(X) bswap_32(X)
57 #elif __BYTE_ORDER == __LITTLE_ENDIAN
58 #define STORE32_LE(X) (X)
59 #define LOAD32_LE(X) (X)
61 #error unkown endianness!
64 uint32_t crc32buf(char *buf
, size_t len
);
66 /**********************************************************************/
69 #define TRX_MAGIC 0x30524448 /* "HDR0" */
70 #define TRX_MAX_LEN 0x720000
71 #define TRX_NO_HEADER 1 /* Do not write TRX header */
74 uint32_t magic
; /* "HDR0" */
75 uint32_t len
; /* Length of file including header */
76 uint32_t crc32
; /* 32-bit CRC from flag_version to end of file */
77 uint32_t flag_version
; /* 0:15 flags, 16:31 version */
78 uint32_t offsets
[4]; /* Offsets of partitions from start of header */
81 /**********************************************************************/
83 void usage(void) __attribute__ (( __noreturn__
));
87 fprintf(stderr
, "Usage:\n");
88 fprintf(stderr
, " trx [-2] [-o outfile] [-m maxlen] [-a align] [-b absolute offset] [-x relative offset]\n");
89 fprintf(stderr
, " [-f file] [-f file [-f file [-f file (v2 only)]]]\n");
93 int main(int argc
, char **argv
)
100 int c
, i
, append
= 0;
103 uint32_t cur_len
, fsmark
=0;
104 unsigned long maxlen
= TRX_MAX_LEN
;
105 struct trx_header
*p
;
106 char trx_version
= 1;
107 unsigned char binheader
[32];
109 fprintf(stderr
, "mjn3's trx replacement - v0.81.1\n");
111 if (!(buf
= malloc(maxlen
))) {
112 fprintf(stderr
, "malloc failed\n");
116 p
= (struct trx_header
*) buf
;
118 p
->magic
= STORE32_LE(TRX_MAGIC
);
119 cur_len
= sizeof(struct trx_header
) - 4; /* assume v1 header */
124 while ((c
= getopt(argc
, argv
, "-:2o:m:a:x:b:f:A:F:")) != -1) {
127 /* take care that nothing was written to buf so far */
128 if (cur_len
!= sizeof(struct trx_header
) - 4) {
129 fprintf(stderr
, "-2 has to be used before any other argument!\n");
144 p
->offsets
[i
++] = STORE32_LE(cur_len
);
146 if (!(in
= fopen(optarg
, "r"))) {
147 fprintf(stderr
, "can not open \"%s\" for reading\n", optarg
);
150 n
= fread(buf
+ cur_len
, 1, maxlen
- cur_len
, in
);
152 fprintf(stderr
, "fread failure or file \"%s\" too large\n",optarg
);
160 memset(buf
+ cur_len
+ n
, 0, ROUND
- (n
& (ROUND
-1)));
161 n
+= ROUND
- (n
& (ROUND
-1));
169 if (ofn
&& !(out
= fopen(ofn
, "w"))) {
170 fprintf(stderr
, "can not open \"%s\" for writing\n", ofn
);
177 maxlen
= strtoul(optarg
, &e
, 0);
178 if (errno
|| (e
== optarg
) || *e
) {
179 fprintf(stderr
, "illegal numeric string\n");
184 if (maxlen
& (ROUND
-1)) {
185 maxlen
+= (ROUND
- (maxlen
& (ROUND
-1)));
187 if (maxlen
< ROUND
) {
188 fprintf(stderr
, "maxlen too small (or wrapped)\n");
191 if (maxlen
> TRX_MAX_LEN
) {
192 fprintf(stderr
, "WARNING: maxlen exceeds default maximum! Beware of overwriting nvram!\n");
194 if (!(buf
= realloc(buf
,maxlen
))) {
195 fprintf(stderr
, "realloc failed");
198 p
= (struct trx_header
*) buf
;
202 n
= strtoul(optarg
, &e
, 0);
203 if (errno
|| (e
== optarg
) || *e
) {
204 fprintf(stderr
, "illegal numeric string\n");
207 if (cur_len
& (n
-1)) {
208 n
= n
- (cur_len
& (n
-1));
209 memset(buf
+ cur_len
, 0, n
);
215 n
= strtoul(optarg
, &e
, 0);
216 if (errno
|| (e
== optarg
) || *e
) {
217 fprintf(stderr
, "illegal numeric string\n");
221 fprintf(stderr
, "WARNING: current length exceeds -b %d offset\n",(int) n
);
223 memset(buf
+ cur_len
, 0, n
- cur_len
);
229 n2
= strtol(optarg
, &e
, 0);
230 if (errno
|| (e
== optarg
) || *e
) {
231 fprintf(stderr
, "illegal numeric string\n");
236 fprintf(stderr
, "WARNING: current length smaller then -x %d offset\n",(int) n2
);
241 memset(buf
+ cur_len
, 0, n2
);
250 p
->flag_version
= STORE32_LE((trx_version
<< 16));
253 fprintf(stderr
, "we require atleast one filename\n");
259 n
= cur_len
& (ROUND
-1);
261 memset(buf
+ cur_len
, 0, ROUND
- n
);
262 cur_len
+= ROUND
- n
;
265 /* for TRXv2 set bin-header Flags to 0xFF for CRC calculation like CFE does */
266 if (trx_version
== 2) {
267 if(cur_len
- LOAD32_LE(p
->offsets
[3]) < sizeof(binheader
)) {
268 fprintf(stderr
, "TRXv2 binheader too small!\n");
271 memcpy(binheader
, buf
+ LOAD32_LE(p
->offsets
[3]), sizeof(binheader
)); /* save header */
272 memset(buf
+ LOAD32_LE(p
->offsets
[3]) + 22, 0xFF, 8); /* set stable and try1-3 to 0xFF */
275 p
->crc32
= crc32buf((char *) &p
->flag_version
,
276 (fsmark
)?fsmark
:cur_len
- offsetof(struct trx_header
, flag_version
));
277 p
->crc32
= STORE32_LE(p
->crc32
);
279 p
->len
= STORE32_LE((fsmark
) ? fsmark
: cur_len
);
280 p
->len
= STORE32_LE(p
->len
);
282 /* restore TRXv2 bin-header */
283 if (trx_version
== 2) {
284 memcpy(buf
+ LOAD32_LE(p
->offsets
[3]), binheader
, sizeof(binheader
));
287 if (!fwrite(buf
, cur_len
, 1, out
) || fflush(out
)) {
288 fprintf(stderr
, "fwrite failed\n");
297 /**********************************************************************/
298 /* The following was grabbed and tweaked from the old snippets collection
299 * of public domain C code. */
301 /**********************************************************************\
302 |* Demonstration program to compute the 32-bit CRC used as the frame *|
303 |* check sequence in ADCCP (ANSI X3.66, also known as FIPS PUB 71 *|
304 |* and FED-STD-1003, the U.S. versions of CCITT's X.25 link-level *|
305 |* protocol). The 32-bit FCS was added via the Federal Register, *|
306 |* 1 June 1982, p.23798. I presume but don't know for certain that *|
307 |* this polynomial is or will be included in CCITT V.41, which *|
308 |* defines the 16-bit CRC (often called CRC-CCITT) polynomial. FIPS *|
309 |* PUB 78 says that the 32-bit FCS reduces otherwise undetected *|
310 |* errors by a factor of 10^-5 over 16-bit FCS. *|
311 \**********************************************************************/
313 /* Copyright (C) 1986 Gary S. Brown. You may use this program, or
314 code or tables extracted from it, as desired without restriction.*/
316 /* First, the polynomial itself and its table of feedback terms. The */
318 /* X^32+X^26+X^23+X^22+X^16+X^12+X^11+X^10+X^8+X^7+X^5+X^4+X^2+X^1+X^0 */
319 /* Note that we take it "backwards" and put the highest-order term in */
320 /* the lowest-order bit. The X^32 term is "implied"; the LSB is the */
321 /* X^31 term, etc. The X^0 term (usually shown as "+1") results in */
322 /* the MSB being 1. */
324 /* Note that the usual hardware shift register implementation, which */
325 /* is what we're using (we're merely optimizing it by doing eight-bit */
326 /* chunks at a time) shifts bits into the lowest-order term. In our */
327 /* implementation, that means shifting towards the right. Why do we */
328 /* do it this way? Because the calculated CRC must be transmitted in */
329 /* order from highest-order term to lowest-order term. UARTs transmit */
330 /* characters in order from LSB to MSB. By storing the CRC this way, */
331 /* we hand it to the UART in the order low-byte to high-byte; the UART */
332 /* sends each low-bit to hight-bit; and the result is transmission bit */
333 /* by bit from highest- to lowest-order term without requiring any bit */
334 /* shuffling on our part. Reception works similarly. */
336 /* The feedback terms table consists of 256, 32-bit entries. Notes: */
338 /* 1. The table can be generated at runtime if desired; code to do so */
339 /* is shown later. It might not be obvious, but the feedback */
340 /* terms simply represent the results of eight shift/xor opera- */
341 /* tions for all combinations of data and CRC register values. */
343 /* 2. The CRC accumulation logic is the same for all CRC polynomials, */
344 /* be they sixteen or thirty-two bits wide. You simply choose the */
345 /* appropriate table. Alternatively, because the table can be */
346 /* generated at runtime, you can start by generating the table for */
347 /* the polynomial in question and use exactly the same "updcrc", */
348 /* if your application needn't simultaneously handle two CRC */
349 /* polynomials. (Note, however, that XMODEM is strange.) */
351 /* 3. For 16-bit CRCs, the table entries need be only 16 bits wide; */
352 /* of course, 32-bit entries work OK if the high 16 bits are zero. */
354 /* 4. The values must be right-shifted by eight bits by the "updcrc" */
355 /* logic; the shift must be unsigned (bring in zeroes). On some */
356 /* hardware you could probably optimize the shift in assembler by */
357 /* using byte-swap instructions. */
359 static const uint32_t crc_32_tab
[] = { /* CRC polynomial 0xedb88320 */
360 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
361 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
362 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
363 0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
364 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
365 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
366 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
367 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
368 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
369 0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
370 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
371 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
372 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
373 0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
374 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
375 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
376 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
377 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
378 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
379 0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
380 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
381 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
382 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
383 0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
384 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
385 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
386 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
387 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
388 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
389 0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
390 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
391 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
392 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
393 0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
394 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
395 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
396 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
397 0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
398 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
399 0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
400 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
401 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
402 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
405 #define UPDC32(octet,crc) (crc_32_tab[((crc) ^ (octet)) & 0xff] ^ ((crc) >> 8))
407 uint32_t crc32buf(char *buf
, size_t len
)
413 for ( ; len
; --len
, ++buf
)
415 crc
= UPDC32(*buf
, crc
);
This page took 0.070327 seconds and 5 git commands to generate.