openwrt/docs/hardware/linksys/wrt54g_v11/dmesg-2_4_29.txt

   1 CPU revision is: 00024000
   2 Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
   3 Primary data cache 4kB, 2-way, linesize 16 bytes.
   4 Linux version 2.4.29 (nthill@mr-grey) (gcc version 3.3.5) #1 Tue Mar 1 19:49:53 CET 2005
   5 Determined physical RAM map:
   6  memory: 01000000 @ 00000000 (usable)
   7 On node 0 totalpages: 4096
   8 zone(0): 4096 pages.
   9 zone(1): 0 pages.
  10 zone(2): 0 pages.
  11 Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs init=/etc/preinit noinitrd console=ttyS0,115200
  12 CPU: BCM4710 rev 0 at 125 MHz
  13 Using 62.400 MHz high precision timer.
  14 !unable to setup serial console!
  15 Calibrating delay loop... 82.94 BogoMIPS
  16 Memory: 14044k/16384k available (1485k kernel code, 2340k reserved, 100k data, 100k init, 0k highmem)
  17 Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
  18 Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
  19 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
  20 Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
  21 Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
  22 Checking for 'wait' instruction...  unavailable.
  23 POSIX conformance testing by UNIFIX
  24 PCI: Fixing up bus 0
  25 PCI: Fixing up bridge
  26 PCI: Setting latency timer of device 01:00.0 to 64
  27 PCI: Fixing up bus 1
  28 Linux NET4.0 for Linux 2.4
  29 Based upon Swansea University Computer Society NET3.039
  30 Initializing RT netlink socket
  31 Starting kswapd
  32 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
  33 devfs: boot_options: 0x1
  34 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
  35 Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
  36 pty: 256 Unix98 ptys configured
  37 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
  38 Software Watchdog Timer: 0.05, timer margin: 60 sec
  39 loop: loaded (max 8 devices)
  40 PPP generic driver version 2.4.2
  41  Amd/Fujitsu Extended Query Table v1.1 at 0x0040
  42 Physically mapped flash: Swapping erase regions for broken CFI table.
  43 number of CFI chips: 1
  44 cfi_cmdset_0002: Disabling fast programming due to code brokenness.
  45 Flash device: 0x400000 at 0x1fc00000
  46 Creating 5 MTD partitions on "Physically mapped flash":
  47 0x00000000-0x00040000 : "pmon"
  48 0x00040000-0x003f0000 : "linux"
  49 0x000edd94-0x001fd000 : "rootfs"
  50 mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
  51 0x003f0000-0x00400000 : "nvram"
  52 0x00200000-0x003f0000 : "OpenWrt"
  53 sflash: chipcommon not found
  54 Initializing Cryptographic API
  55 NET4: Linux TCP/IP 1.0 for NET4.0
  56 IP Protocols: ICMP, UDP, TCP, IGMP
  57 IP: routing cache hash table of 512 buckets, 4Kbytes
  58 TCP: Hash tables configured (established 1024 bind 2048)
  59 ip_conntrack version 2.1 (128 buckets, 1024 max) - 288 bytes per conntrack
  60 ip_tables: (C) 2000-2002 Netfilter core team
  61 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  62 NET4: Ethernet Bridge 008 for NET4.0
  63 Bridge firewalling registered
  64 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  65 All bugs added by David S. Miller <davem@redhat.com>
  66 VFS: Mounted root (squashfs filesystem) readonly.
  67 Mounted devfs on /dev
  68 Freeing unused kernel memory: 100k freed
  69 Warning: unable to open an initial console.
  70 Algorithmics/MIPS FPU Emulator v1.5
  71 diag boardtype: 0000041a
  72 using v1 hardware
  73 jffs2.bbc: SIZE compression mode activated.
  74 PCI: Setting latency timer of device 00:02.0 to 64
  75 5325E   phy=FFFFFFFF
  76 eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
  77 PCI: Setting latency timer of device 00:08.0 to 64
  78 5325E   phy=FFFFFFFF
  79 eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
  80 PCI: Setting latency timer of device 01:08.0 to 64
  81 PCI: Enabling device 01:08.0 (0004 -> 0006)
  82 eth2: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
  83 device eth0 entered promiscuous mode
  84 vlan2: add 01:00:5e:00:00:01 mcast address to master interface
  85 device eth1 entered promiscuous mode
  86 device eth2 entered promiscuous mode
  87 br0: port 3(eth2) entering learning state
  88 br0: port 2(eth1) entering learning state
  89 br0: port 1(vlan2) entering learning state
  90 br0: port 3(eth2) entering forwarding state
  91 br0: topology change detected, propagating
  92 br0: port 2(eth1) entering forwarding state
  93 br0: topology change detected, propagating
  94 br0: port 1(vlan2) entering forwarding state
  95 br0: topology change detected, propagating
  96 vlan1: add 01:00:5e:00:00:01 mcast address to master interface