target/linux/mpc83xx/patches-2.6.35/025-rb600-dts-qe-boot-fixups.patch

   1 --- a/arch/powerpc/boot/dts/rb600.dts
   2 +++ b/arch/powerpc/boot/dts/rb600.dts
   3 @@ -20,9 +20,11 @@
   4         aliases {
   5                 ethernet0 = &enet0;
   6                 ethernet1 = &enet1;
   7 +               pci0 = &pci0;
   8         };
   9
  10         chosen {
  11 +               bootargs = "console=ttyS0,115200 board=mpc8323 rootfstype=squashfs,yaffs2,jffs2 root=/dev/mtdblock1 boot=1";
  12                 linux,stdout-path = "/soc8343@e0000000/serial@4500";
  13         };
  14
  15 @@ -150,6 +152,45 @@
  16                         device_type = "gpio";
  17                 };
  18
  19 +               dma@82a8 {
  20 +                        #address-cells = <1>;
  21 +                        #size-cells = <1>;
  22 +                        compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
  23 +                        reg = <0x82a8 4>;
  24 +                        ranges = <0 0x8100 0x1a8>;
  25 +                        interrupt-parent = <&ipic>;
  26 +                        interrupts = <71 8>;
  27 +                        cell-index = <0>;
  28 +                        dma-channel@0 {
  29 +                                compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
  30 +                                reg = <0 0x80>;
  31 +                                cell-index = <0>;
  32 +                                interrupt-parent = <&ipic>;
  33 +                                interrupts = <71 8>;
  34 +                        };
  35 +                        dma-channel@80 {
  36 +                                compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
  37 +                                reg = <0x80 0x80>;
  38 +                                cell-index = <1>;
  39 +                                interrupt-parent = <&ipic>;
  40 +                                interrupts = <71 8>;
  41 +                        };
  42 +                        dma-channel@100 {
  43 +                                compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
  44 +                                reg = <0x100 0x80>;
  45 +                                cell-index = <2>;
  46 +                                interrupt-parent = <&ipic>;
  47 +                                interrupts = <71 8>;
  48 +                        };
  49 +                        dma-channel@180 {
  50 +                                compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
  51 +                                reg = <0x180 0x28>;
  52 +                                cell-index = <3>;
  53 +                                interrupt-parent = <&ipic>;
  54 +                                interrupts = <71 8>;
  55 +                        };
  56 +                };
  57 +
  58                 enet0: ethernet@25000 {
  59                         #address-cells = <1>;
  60                         #size-cells = <1>;
  61 --- a/arch/powerpc/boot/rb600.c
  62 +++ b/arch/powerpc/boot/rb600.c
  63 @@ -45,14 +45,6 @@ static void rb600_fixups(void)
  64         clock = fdt_getprop(fw_dtb, node, "clock-frequency", &size);
  65         dt_fixup_cpu_clocks(*clock, *timebase, 0);
  66
  67 -       /* Fixup chosen
  68 -        * The bootloader reads the kernelparm segment and adds the content to
  69 -        * bootargs. This is needed to specify root and other boot flags.
  70 -        */
  71 -       chosen = finddevice("/chosen");
  72 -       node = fdt_path_offset(fw_dtb, "/chosen");
  73 -       bootargs = fdt_getprop(fw_dtb, node, "bootargs", &size);
  74 -       setprop_str(chosen, "bootargs", bootargs);
  75  }
  76
  77  void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
  78 --- a/arch/powerpc/platforms/83xx/rbppc.c
  79 +++ b/arch/powerpc/platforms/83xx/rbppc.c
  80 @@ -56,6 +56,8 @@ static void *gtm;
  81  static int beeper_irq;
  82  static unsigned beeper_gpio_pin[2];
  83
  84 +int rb333model = 0;
  85 +
  86  irqreturn_t rbppc_timer_irq(int irq, void *ptr)
  87  {
  88         static int toggle = 0;
  89 @@ -120,6 +122,8 @@ static void __init rbppc_setup_arch(void
  90         }
  91  #endif
  92
  93 +if (rb333model) {
  94 +
  95  #ifdef CONFIG_QUICC_ENGINE
  96          qe_reset();
  97
  98 @@ -132,6 +136,8 @@ static void __init rbppc_setup_arch(void
  99          }
 100  #endif
 101
 102 +}  /* RB333 */
 103 +
 104  }
 105
 106  void __init rbppc_init_IRQ(void)
 107 @@ -145,6 +151,8 @@ void __init rbppc_init_IRQ(void)
 108                 of_node_put(np);
 109         }
 110
 111 +if (rb333model) {
 112 +
 113  #ifdef CONFIG_QUICC_ENGINE
 114          np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
 115          if (!np) {
 116 @@ -156,6 +164,8 @@ void __init rbppc_init_IRQ(void)
 117          of_node_put(np);
 118  #endif                          /* CONFIG_QUICC_ENGINE */
 119
 120 +}  /* RB333 */
 121 +
 122  }
 123
 124  static int __init rbppc_probe(void)
 125 @@ -167,8 +177,10 @@ static int __init rbppc_probe(void)
 126         if (!model)
 127                 return 0;
 128
 129 -       if (strcmp(model, "RB333") == 0)
 130 +       if (strcmp(model, "RB333") == 0) {
 131 +               rb333model = 1;
 132                 return 1;
 133 +       }
 134
 135         if (strcmp(model, "RB600") == 0)
 136                 return 1;