target/linux/linux-2.4/patches/brcm/004-diag_led.patch

   1 diff -urN linux-2.4.30.dev/drivers/net/Makefile linux-2.4.30.dev2/drivers/net/Makefile
   2 --- linux-2.4.30.dev/drivers/net/Makefile       2005-08-22 01:41:45.930653216 +0200
   3 +++ linux-2.4.30.dev2/drivers/net/Makefile      2005-08-22 01:58:04.162939304 +0200
   4 @@ -41,6 +41,8 @@
   5    obj-$(CONFIG_ISDN) += slhc.o
   6  endif
   7
   8 +subdir-m += diag
   9 +
  10  subdir-$(CONFIG_HND) += hnd
  11  subdir-$(CONFIG_ET) += et
  12  subdir-$(CONFIG_WL) += wl
  13 diff -urN linux-2.4.30.dev/drivers/net/diag/Makefile linux-2.4.30.dev2/drivers/net/diag/Makefile
  14 --- linux-2.4.30.dev/drivers/net/diag/Makefile  1970-01-01 01:00:00.000000000 +0100
  15 +++ linux-2.4.30.dev2/drivers/net/diag/Makefile 2005-08-22 00:12:23.655170000 +0200
  16 @@ -0,0 +1,13 @@
  17 +#$Id: 005-diag_led.patch,v 1.1.2.1 2005/08/22 01:56:06 nbd Exp $
  18 +
  19 +EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER
  20 +
  21 +O_TARGET       := diag.o
  22 +
  23 +MAC_OBJS       := diag_led.o
  24 +
  25 +export-objs    :=
  26 +obj-y          := $(MAC_OBJS)
  27 +obj-m          := $(O_TARGET)
  28 +
  29 +include $(TOPDIR)/Rules.make
  30 diff -urN linux-2.4.30.dev/drivers/net/diag/diag_led.c linux-2.4.30.dev2/drivers/net/diag/diag_led.c
  31 --- linux-2.4.30.dev/drivers/net/diag/diag_led.c        1970-01-01 01:00:00.000000000 +0100
  32 +++ linux-2.4.30.dev2/drivers/net/diag/diag_led.c       2005-08-22 03:37:58.112053448 +0200
  33 @@ -0,0 +1,245 @@
  34 +/*
  35 + * diag_led.c - replacement diag module
  36 + *
  37 + * Copyright (C) 2004 Mike Baker,
  38 + *                    Imre Kaloz <kaloz@dune.hu>
  39 + *
  40 + * This program is free software; you can redistribute it and/or
  41 + * modify it under the terms of the GNU General Public License
  42 + * as published by the Free Software Foundation; either version 2
  43 + * of the License, or (at your option) any later version.
  44 + *
  45 + * This program is distributed in the hope that it will be useful,
  46 + * but WITHOUT ANY WARRANTY; without even the implied warranty of
  47 + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  48 + * GNU General Public License for more details.
  49 + *
  50 + * You should have received a copy of the GNU General Public License
  51 + * along with this program; if not, write to the Free Software
  52 + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  53 + *
  54 + * $Id: 005-diag_led.patch,v 1.1.2.1 2005/08/22 01:56:06 nbd Exp $
  55 + */
  56 +
  57 +/*
  58 + * ChangeLog:
  59 + * 2004/03/28 initial release
  60 + * 2004/08/26 asus & buffalo support added
  61 + * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
  62 + * 2005/04/13 added licensing informations
  63 + * 2005/04/18 base reset polarity off initial readings
  64 + */
  65 +
  66 +#include <linux/module.h>
  67 +#include <linux/init.h>
  68 +#include <linux/kernel.h>
  69 +#include <linux/sysctl.h>
  70 +#include <asm/io.h>
  71 +#include <typedefs.h>
  72 +#include <bcmdevs.h>
  73 +#include <sbutils.h>
  74 +
  75 +extern char * nvram_get(const char *name);
  76 +static void *sbh;
  77 +
  78 +// v2.x - - - - -
  79 +#define DIAG_GPIO (1<<1)
  80 +#define DMZ_GPIO  (1<<7)
  81 +
  82 +static void set_gpio(uint32 mask, uint32 value) {
  83 +       sb_gpiocontrol(sbh,mask,0);
  84 +       sb_gpioouten(sbh,mask,mask);
  85 +       sb_gpioout(sbh,mask,value);
  86 +}
  87 +
  88 +static void v2_set_diag(u8 state) {
  89 +       set_gpio(DIAG_GPIO,state);
  90 +}
  91 +static void v2_set_dmz(u8 state) {
  92 +       set_gpio(DMZ_GPIO,state);
  93 +}
  94 +
  95 +// v1.x - - - - -
  96 +#define LED_DIAG   0x13
  97 +#define LED_DMZ    0x12
  98 +
  99 +static void v1_set_diag(u8 state) {
 100 +       if (!state) {
 101 +               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
 102 +       } else {
 103 +               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
 104 +       }
 105 +}
 106 +static void v1_set_dmz(u8 state) {
 107 +       if (!state) {
 108 +               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
 109 +       } else {
 110 +               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
 111 +       }
 112 +}
 113 +
 114 +// - - - - -
 115 +static void ignore(u8 ignored) {};
 116 +
 117 +// - - - - -
 118 +#define BIT_DMZ         0x01
 119 +#define BIT_DIAG        0x04
 120 +
 121 +void (*set_diag)(u8 state);
 122 +void (*set_dmz)(u8 state);
 123 +
 124 +static unsigned int diag = 0;
 125 +
 126 +static void diag_change()
 127 +{
 128 +       set_diag(0xFF); // off
 129 +       set_dmz(0xFF); // off
 130 +
 131 +       if(diag & BIT_DIAG)
 132 +               set_diag(0x00); // on
 133 +       if(diag & BIT_DMZ)
 134 +               set_dmz(0x00); // on
 135 +}
 136 +
 137 +static int proc_diag(ctl_table *table, int write, struct file *filp,
 138 +               void *buffer, size_t *lenp)
 139 +{
 140 +       int r;
 141 +       r = proc_dointvec(table, write, filp, buffer, lenp);
 142 +       if (write && !r) {
 143 +               diag_change();
 144 +       }
 145 +       return r;
 146 +}
 147 +
 148 +// - - - - -
 149 +static unsigned char reset_gpio = 0;
 150 +static unsigned char reset_polarity = 0;
 151 +static unsigned int reset = 0;
 152 +
 153 +static int proc_reset(ctl_table *table, int write, struct file *filp,
 154 +               void *buffer, size_t *lenp)
 155 +{
 156 +
 157 +       if (reset_gpio) {
 158 +               sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
 159 +               sb_gpioouten(sbh,reset_gpio,0);
 160 +               reset=!(sb_gpioin(sbh)&reset_gpio);
 161 +
 162 +               if (reset_polarity) reset=!reset;
 163 +       } else {
 164 +               reset=0;
 165 +       }
 166 +
 167 +       return proc_dointvec(table, write, filp, buffer, lenp);
 168 +}
 169 +
 170 +// - - - - -
 171 +static struct ctl_table_header *diag_sysctl_header;
 172 +
 173 +static ctl_table sys_diag[] = {
 174 +         {
 175 +          ctl_name: 2000,
 176 +          procname: "diag",
 177 +          data: &diag,
 178 +          maxlen: sizeof(diag),
 179 +          mode: 0644,
 180 +          proc_handler: proc_diag
 181 +        },
 182 +        {
 183 +          ctl_name: 2001,
 184 +          procname: "reset",
 185 +          data: &reset,
 186 +          maxlen: sizeof(reset),
 187 +          mode: 0444,
 188 +          proc_handler: proc_reset
 189 +        },
 190 +         { 0 }
 191 +};
 192 +
 193 +static int __init diag_init()
 194 +{
 195 +       char *buf;
 196 +       u32 board_type;
 197 +       sbh = sb_kattach();
 198 +       sb_gpiosetcore(sbh);
 199 +
 200 +       board_type = sb_boardtype(sbh);
 201 +       printk(KERN_INFO "diag boardtype: %08x\n",board_type);
 202 +
 203 +       set_diag=ignore;
 204 +       set_dmz=ignore;
 205 +
 206 +       buf=nvram_get("boardrev");
 207 +       if (((board_type & 0xf00) == 0x400) && strcmp(buf,"0x10")) {
 208 +               buf=nvram_get("boardtype")?:"";
 209 +               if (!strcmp(buf,"bcm94710dev")) {
 210 +                       buf=nvram_get("boardnum")?:"";
 211 +                       if (!strcmp(buf,"42")) {
 212 +                               // wrt54g v1.x
 213 +                               set_diag=v1_set_diag;
 214 +                               set_dmz=v1_set_dmz;
 215 +                               reset_gpio=(1<<6);
 216 +                       }
 217 +                       if (!strcmp(buf,"asusX")) {
 218 +                               //asus wl-500g
 219 +                               reset_gpio=(1<<6);
 220 +                       }
 221 +               }
 222 +               if (!strcmp(buf,"bcm94710ap")) {
 223 +                       buf=nvram_get("boardnum")?:"";
 224 +                       if (!strcmp(buf,"42")) {
 225 +                               // buffalo
 226 +                               set_dmz=v2_set_dmz;
 227 +                               reset_gpio=(1<<4);
 228 +                       }
 229 +                       if (!strcmp(buf,"44")) {
 230 +                               //dell truemobile
 231 +                               set_dmz=v2_set_dmz;
 232 +                               reset_gpio=(1<<0);
 233 +                       }
 234 +               }
 235 +       } else {
 236 +               buf=nvram_get("boardnum")?:"";
 237 +               if (!strcmp(buf,"42")) {
 238 +                       //linksys
 239 +                       set_diag=v2_set_diag;
 240 +                       set_dmz=v2_set_dmz;
 241 +                       reset_gpio=(1<<6);
 242 +               }
 243 +               if (!strcmp(buf,"44")) {
 244 +                       //motorola
 245 +                       reset_gpio=(1<<5);
 246 +               }
 247 +               if (!strcmp(buf,"00")) {
 248 +                       //buffalo
 249 +                       reset_gpio=(1<<7);
 250 +               }
 251 +               if (!strcmp(buf,"45")) {
 252 +                       //wl-500g deluxe
 253 +                       reset_gpio=(1<<6);
 254 +               }
 255 +       }
 256 +
 257 +
 258 +       sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
 259 +       sb_gpioouten(sbh,reset_gpio,0);
 260 +       reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
 261 +
 262 +       diag_sysctl_header = register_sysctl_table(sys_diag, 0);
 263 +       diag_change();
 264 +
 265 +       return 0;
 266 +}
 267 +
 268 +static void __exit diag_exit()
 269 +{
 270 +       unregister_sysctl_table(diag_sysctl_header);
 271 +}
 272 +
 273 +EXPORT_NO_SYMBOLS;
 274 +MODULE_AUTHOR("openwrt.org");
 275 +MODULE_LICENSE("GPL");
 276 +
 277 +module_init(diag_init);
 278 +module_exit(diag_exit);