make ixp4xx require gpiolib
[openwrt.git] / target / linux / pxa / patches-2.6.21 / 024-bugfix-serial-register-status.patch
1 Index: linux-2.6.21.7/drivers/serial/pxa.c
2 ===================================================================
3 --- linux-2.6.21.7.orig/drivers/serial/pxa.c
4 +++ linux-2.6.21.7/drivers/serial/pxa.c
5 @@ -57,6 +57,8 @@ struct uart_pxa_port {
6 unsigned int lsr_break_flag;
7 unsigned int cken;
8 char *name;
9 + unsigned int msr;
10 + unsigned int lsr;
11 };
12
13 static inline unsigned int serial_in(struct uart_pxa_port *up, int offset)
14 @@ -159,6 +161,7 @@ static inline void receive_chars(struct
15
16 ignore_char:
17 *status = serial_in(up, UART_LSR);
18 + up->lsr = *status;
19 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
20 tty_flip_buffer_push(tty);
21 }
22 @@ -211,7 +214,7 @@ static inline void check_modem_status(st
23 int status;
24
25 status = serial_in(up, UART_MSR);
26 -
27 + up->msr = status;
28 if ((status & UART_MSR_ANY_DELTA) == 0)
29 return;
30
31 @@ -242,6 +245,7 @@ static inline irqreturn_t serial_pxa_irq
32 //printk(KERN_WARNING "serial_pxa_irq: odd -- interrupt triggered, but no interrupt in IIR: %08x\n",iir);
33 }
34 lsr = serial_in(up, UART_LSR);
35 + up->lsr = lsr;
36 if (lsr & UART_LSR_DR)
37 receive_chars(up, &lsr);
38 check_modem_status(up);
39 @@ -258,7 +262,7 @@ static unsigned int serial_pxa_tx_empty(
40 unsigned int ret;
41
42 spin_lock_irqsave(&up->port.lock, flags);
43 - ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
44 + ret = up->lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
45 spin_unlock_irqrestore(&up->port.lock, flags);
46
47 return ret;
48 @@ -270,7 +274,7 @@ static unsigned int serial_pxa_get_mctrl
49 unsigned char status;
50 unsigned int ret;
51
52 - status = serial_in(up, UART_MSR);
53 + status = up->msr;
54
55 ret = 0;
56 if (status & UART_MSR_DCD)
57 @@ -400,10 +404,10 @@ static int serial_pxa_startup(struct uar
58 /*
59 * And clear the interrupt registers again for luck.
60 */
61 - (void) serial_in(up, UART_LSR);
62 + up->lsr = serial_in(up, UART_LSR);
63 (void) serial_in(up, UART_RX);
64 (void) serial_in(up, UART_IIR);
65 - (void) serial_in(up, UART_MSR);
66 + up->msr = serial_in(up, UART_MSR);
67
68 return 0;
69 }
This page took 0.041308 seconds and 5 git commands to generate.