target/linux/ramips/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2
   3 . /etc/functions.sh
   4 . /lib/ramips.sh
   5 . /lib/functions/uci-defaults.sh
   6
   7 if [ ! -x /usr/sbin/maccalc ]; then
   8         echo "$0: maccalc not found!"
   9         return
  10 fi
  11
  12 ramips_setup_interfaces()
  13 {
  14         local board="$1"
  15
  16         ucidef_set_interface_loopback
  17
  18         case $board in
  19         argus-atp52b | \
  20         b2c | \
  21         f5d8235-v2 | \
  22         nw718 | \
  23         w502u)
  24                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  25                 ;;
  26
  27         wl-351)
  28                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  29                 ucidef_add_switch "rtl8366rb" "1" "1"
  30                 ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
  31                 ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
  32                 ;;
  33
  34         wli-tx4-ag300n)
  35                 ucidef_set_interface_lan "eth0"
  36                 ;;
  37
  38         rt-n15)
  39                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  40                 ucidef_add_switch "rtl8366s" "1" "1"
  41                 ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
  42                 ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
  43                 ;;
  44
  45         *)
  46                 RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
  47                 if [ -n "${RT3X5X}" ]; then
  48                         ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  49                 else
  50                         ucidef_set_interfaces_lan_wan "eth0" "eth1"
  51                 fi
  52                 ;;
  53         esac
  54 }
  55
  56 ramips_setup_macs()
  57 {
  58         local board="$1"
  59         local lan_mac=""
  60         local wan_mac=""
  61
  62         case $board in
  63         f5d8235-v2)
  64                 lan_mac=$(ramips_get_mac_nvram "u-boot" 262148)
  65                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  66                 ;;
  67
  68         argus-atp52b | \
  69         b2c | \
  70         nw718 | \
  71         rt-n15 | \
  72         wl-351)
  73                 lan_mac=$(ramips_get_mac_binary factory 4)
  74                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  75                 ;;
  76
  77         dir-300-b1 |\
  78         dir-300-b2 |\
  79         dir-600-b1)
  80                 lan_mac=$(ramips_get_mac_binary devdata 16388)
  81                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  82                 ;;
  83
  84         esr-9753 | \
  85         nbg-419n)
  86                 lan_mac=$(ramips_get_mac_binary factory 4)
  87                 wan_mac=$(ramips_get_mac_binary factory 40)
  88                 ;;
  89
  90         w502u)
  91                 lan_mac=$(ramips_get_mac_binary factory 40)
  92                 wan_mac=$(ramips_get_mac_binary factory 46)
  93                 ;;
  94
  95         wli-tx4-ag300n)
  96                 lan_mac=$(ramips_get_mac_binary factory 4)
  97                 ;;
  98
  99         esac
 100
 101         [ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
 102         [ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
 103 }
 104
 105 [ -e /etc/config/network ] && exit 0
 106
 107 touch /etc/config/network
 108
 109 board=$(ramips_board_name)
 110
 111 ramips_setup_interfaces $board
 112 ramips_setup_macs $board
 113
 114 uci commit network
 115
 116 exit 0