target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbpcmcia.h

   1 /*
   2  * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
   3  *
   4  * Copyright 2007, Broadcom Corporation
   5  * All Rights Reserved.
   6  *
   7  * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
   8  * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
   9  * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
  10  * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
  11  *
  12  */
  13
  14 #ifndef _SBPCMCIA_H
  15 #define _SBPCMCIA_H
  16
  17
  18 /* All the addresses that are offsets in attribute space are divided
  19  * by two to account for the fact that odd bytes are invalid in
  20  * attribute space and our read/write routines make the space appear
  21  * as if they didn't exist. Still we want to show the original numbers
  22  * as documented in the hnd_pcmcia core manual.
  23  */
  24
  25 /* PCMCIA Function Configuration Registers */
  26 #define PCMCIA_FCR              (0x700 / 2)
  27
  28 #define FCR0_OFF                0
  29 #define FCR1_OFF                (0x40 / 2)
  30 #define FCR2_OFF                (0x80 / 2)
  31 #define FCR3_OFF                (0xc0 / 2)
  32
  33 #define PCMCIA_FCR0             (0x700 / 2)
  34 #define PCMCIA_FCR1             (0x740 / 2)
  35 #define PCMCIA_FCR2             (0x780 / 2)
  36 #define PCMCIA_FCR3             (0x7c0 / 2)
  37
  38 /* Standard PCMCIA FCR registers */
  39
  40 #define PCMCIA_COR              0
  41
  42 #define COR_RST                 0x80
  43 #define COR_LEV                 0x40
  44 #define COR_IRQEN               0x04
  45 #define COR_BLREN               0x01
  46 #define COR_FUNEN               0x01
  47
  48
  49 #define PCICIA_FCSR             (2 / 2)
  50 #define PCICIA_PRR              (4 / 2)
  51 #define PCICIA_SCR              (6 / 2)
  52 #define PCICIA_ESR              (8 / 2)
  53
  54
  55 #define PCM_MEMOFF              0x0000
  56 #define F0_MEMOFF               0x1000
  57 #define F1_MEMOFF               0x2000
  58 #define F2_MEMOFF               0x3000
  59 #define F3_MEMOFF               0x4000
  60
  61 /* Memory base in the function fcr's */
  62 #define MEM_ADDR0               (0x728 / 2)
  63 #define MEM_ADDR1               (0x72a / 2)
  64 #define MEM_ADDR2               (0x72c / 2)
  65
  66 /* PCMCIA base plus Srom access in fcr0: */
  67 #define PCMCIA_ADDR0            (0x072e / 2)
  68 #define PCMCIA_ADDR1            (0x0730 / 2)
  69 #define PCMCIA_ADDR2            (0x0732 / 2)
  70
  71 #define MEM_SEG                 (0x0734 / 2)
  72 #define SROM_CS                 (0x0736 / 2)
  73 #define SROM_DATAL              (0x0738 / 2)
  74 #define SROM_DATAH              (0x073a / 2)
  75 #define SROM_ADDRL              (0x073c / 2)
  76 #define SROM_ADDRH              (0x073e / 2)
  77 #define SROM_INFO2              (0x0772 / 2)    /* Corerev >= 2 && <= 5 */
  78 #define SROM_INFO               (0x07be / 2)    /* Corerev >= 6 */
  79
  80 /*  Values for srom_cs: */
  81 #define SROM_IDLE               0
  82 #define SROM_WRITE              1
  83 #define SROM_READ               2
  84 #define SROM_WEN                4
  85 #define SROM_WDS                7
  86 #define SROM_DONE               8
  87
  88 /* Fields in srom_info: */
  89 #define SRI_SZ_MASK             0x03
  90 #define SRI_BLANK               0x04
  91 #define SRI_OTP                 0x80
  92
  93 /* CIS stuff */
  94
  95 /* The CIS stops where the FCRs start */
  96 #define CIS_SIZE                PCMCIA_FCR
  97
  98 /* CIS tuple length field max */
  99 #define CIS_TUPLE_LEN_MAX       0xff
 100
 101 /* Standard tuples we know about */
 102
 103 #define CISTPL_VERS_1           0x15            /* CIS ver, manf, dev & ver strings */
 104 #define CISTPL_MANFID           0x20            /* Manufacturer and device id */
 105 #define CISTPL_FUNCID           0x21            /* Function identification */
 106 #define CISTPL_FUNCE            0x22            /* Function extensions */
 107 #define CISTPL_CFTABLE          0x1b            /* Config table entry */
 108 #define CISTPL_END              0xff            /* End of the CIS tuple chain */
 109
 110 /* Function identifier provides context for the function extentions tuple */
 111
 112
 113 /* Function extensions for LANs */
 114
 115 #define LAN_TECH                1               /* Technology type */
 116 #define LAN_SPEED               2               /* Raw bit rate */
 117 #define LAN_MEDIA               3               /* Transmission media */
 118 #define LAN_NID                 4               /* Node identification (aka MAC addr) */
 119 #define LAN_CONN                5               /* Connector standard */
 120
 121
 122 /* CFTable */
 123 #define CFTABLE_REGWIN_2K       0x08            /* 2k reg windows size */
 124 #define CFTABLE_REGWIN_4K       0x10            /* 4k reg windows size */
 125 #define CFTABLE_REGWIN_8K       0x20            /* 8k reg windows size */
 126
 127 /* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
 128  * take one for HNBU, and use "extensions" (a la FUNCE) within it.
 129  */
 130
 131 #define CISTPL_BRCM_HNBU        0x80
 132
 133 /* Subtypes of BRCM_HNBU: */
 134
 135 #define HNBU_SROMREV            0x00            /* A byte with sromrev, 1 if not present */
 136 #define HNBU_CHIPID             0x01            /* Two 16bit values: PCI vendor & device id */
 137 #define HNBU_BOARDREV           0x02            /* One byte board revision */
 138 #define HNBU_PAPARMS            0x03            /* PA parameters: 8 (sromrev == 1)
 139                                                  * or 9 (sromrev > 1) bytes
 140                                                  */
 141 #define HNBU_OEM                0x04            /* Eight bytes OEM data (sromrev == 1) */
 142 #define HNBU_CC                 0x05            /* Default country code (sromrev == 1) */
 143 #define HNBU_AA                 0x06            /* Antennas available */
 144 #define HNBU_AG                 0x07            /* Antenna gain */
 145 #define HNBU_BOARDFLAGS         0x08            /* board flags (2 or 4 bytes) */
 146 #define HNBU_LEDS               0x09            /* LED set */
 147 #define HNBU_CCODE              0x0a            /* Country code (2 bytes ascii + 1 byte cctl)
 148                                                  * in rev 2
 149                                                  */
 150 #define HNBU_CCKPO              0x0b            /* 2 byte cck power offsets in rev 3 */
 151 #define HNBU_OFDMPO             0x0c            /* 4 byte 11g ofdm power offsets in rev 3 */
 152 #define HNBU_GPIOTIMER          0x0d            /* 2 bytes with on/off values in rev 3 */
 153 #define HNBU_PAPARMS5G          0x0e            /* 5G PA params */
 154 #define HNBU_ANT5G              0x0f            /* 4328 5G antennas available/gain */
 155 #define HNBU_RDLID              0x10            /* 2 byte USB remote downloader (RDL) product Id */
 156 #define HNBU_RSSISMBXA2G        0x11            /* 4328 2G RSSI mid pt sel & board switch arch,
 157                                                  * 2 bytes, rev 3.
 158                                                  */
 159 #define HNBU_RSSISMBXA5G        0x12            /* 4328 5G RSSI mid pt sel & board switch arch,
 160                                                  * 2 bytes, rev 3.
 161                                                  */
 162 #define HNBU_XTALFREQ           0x13            /* 4 byte Crystal frequency in kilohertz */
 163 #define HNBU_TRI2G              0x14            /* 4328 2G TR isolation, 1 byte */
 164 #define HNBU_TRI5G              0x15            /* 4328 5G TR isolation, 3 bytes */
 165 #define HNBU_RXPO2G             0x16            /* 4328 2G RX power offset, 1 byte */
 166 #define HNBU_RXPO5G             0x17            /* 4328 5G RX power offset, 1 byte */
 167 #define HNBU_BOARDNUM   0x18            /* board serial number, independent of mac addr */
 168 #define HNBU_MACADDR    0x19            /* mac addr override for the standard CIS LAN_NID */
 169 #define HNBU_RDLSN              0x1a            /* 2 bytes; serial # advertised in USB descriptor */
 170 #define HNBU_BOARDTYPE          0x1b            /* 2 bytes; boardtype */
 171 #define HNBU_RDLRNDIS           0x20            /* 1 byte; 1 = RDL advertises RNDIS config */
 172 #define HNBU_RDLRWU             0x30            /* 1 byte; 1 = RDL advertises Remote Wake-up */
 173 #define HNBU_SROM3SWRGN         0x80    /* 78 bytes; srom rev 3 s/w region without crc8
 174                                          * plus extra info appended.
 175                                          */
 176
 177 /* sbtmstatelow */
 178 #define SBTML_INT_ACK           0x40000         /* ack the sb interrupt */
 179 #define SBTML_INT_EN            0x20000         /* enable sb interrupt */
 180
 181 /* sbtmstatehigh */
 182 #define SBTMH_INT_STATUS        0x40000         /* sb interrupt status */
 183
 184 #endif  /* _SBPCMCIA_H */