target/linux/cns3xxx/patches-2.6.39/050-cns3xxx_i2c_controller.patch

   1 --- a/drivers/i2c/busses/Kconfig
   2 +++ b/drivers/i2c/busses/Kconfig
   3 @@ -325,6 +325,18 @@ config I2C_BLACKFIN_TWI_CLK_KHZ
   4         help
   5           The unit of the TWI clock is kHz.
   6
   7 +config I2C_CNS3XXX
   8 +       tristate "Cavium CNS3xxx I2C driver"
   9 +       depends on ARCH_CNS3XXX
  10 +       help
  11 +         Support for Cavium CNS3xxx I2C controller driver.
  12 +
  13 +         This driver can also be built as a module.  If so, the module
  14 +         will be called i2c-cns3xxx.
  15 +
  16 +         Please note that this driver might be needed to bring up other
  17 +         devices such as Cavium CNS3xxx Ethernet.
  18 +
  19  config I2C_CPM
  20         tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
  21         depends on (CPM1 || CPM2) && OF_I2C
  22 --- a/drivers/i2c/busses/Makefile
  23 +++ b/drivers/i2c/busses/Makefile
  24 @@ -80,6 +80,7 @@ obj-$(CONFIG_I2C_ELEKTOR)     += i2c-elektor
  25  obj-$(CONFIG_I2C_PCA_ISA)      += i2c-pca-isa.o
  26  obj-$(CONFIG_I2C_SIBYTE)       += i2c-sibyte.o
  27  obj-$(CONFIG_I2C_STUB)         += i2c-stub.o
  28 +obj-$(CONFIG_I2C_CNS3XXX)      += i2c-cns3xxx.o
  29  obj-$(CONFIG_SCx200_ACB)       += scx200_acb.o
  30  obj-$(CONFIG_SCx200_I2C)       += scx200_i2c.o
  31
  32 --- /dev/null
  33 +++ b/drivers/i2c/busses/i2c-cns3xxx.c
  34 @@ -0,0 +1,387 @@
  35 +/*
  36 + * Cavium CNS3xxx I2C Host Controller
  37 + *
  38 + * Copyright 2010 Cavium Network
  39 + * Copyright 2011 Gateworks Corporation
  40 + *               Chris Lang <clang@gateworks.com>
  41 + *
  42 + * This file is free software; you can redistribute it and/or modify
  43 + * it under the terms of the GNU General Public License, Version 2, as
  44 + * published by the Free Software Foundation.
  45 + */
  46 +
  47 +#include <linux/kernel.h>
  48 +#include <linux/module.h>
  49 +#include <linux/init.h>
  50 +#include <linux/platform_device.h>
  51 +#include <asm/io.h>
  52 +#include <linux/wait.h>
  53 +#include <linux/interrupt.h>
  54 +#include <linux/delay.h>
  55 +#include <linux/i2c.h>
  56 +#include <linux/slab.h>
  57 +#include <mach/pm.h>
  58 +#include <mach/cns3xxx.h>
  59 +
  60 +/*
  61 + * We need the memory map
  62 + */
  63 +
  64 +
  65 +#define MISC_MEM_MAP_VALUE(reg_offset) (*((uint32_t volatile *)(CNS3XXX_MISC_BASE_VIRT + reg_offset)))
  66 +#define MISC_IOCDB_CTRL                                MISC_MEM_MAP_VALUE(0x020)
  67 +
  68 +#define I2C_MEM_MAP_ADDR(x)         (CNS3XXX_SSP_BASE_VIRT + x)
  69 +#define I2C_MEM_MAP_VALUE(x)        (*((unsigned int volatile*)I2C_MEM_MAP_ADDR(x)))
  70 +
  71 +#define I2C_CONTROLLER_REG                    I2C_MEM_MAP_VALUE(0x20)
  72 +#define I2C_TIME_OUT_REG                      I2C_MEM_MAP_VALUE(0x24)
  73 +#define I2C_SLAVE_ADDRESS_REG                 I2C_MEM_MAP_VALUE(0x28)
  74 +#define I2C_WRITE_DATA_REG                    I2C_MEM_MAP_VALUE(0x2C)
  75 +#define I2C_READ_DATA_REG                     I2C_MEM_MAP_VALUE(0x30)
  76 +#define I2C_INTERRUPT_STATUS_REG              I2C_MEM_MAP_VALUE(0x34)
  77 +#define I2C_INTERRUPT_ENABLE_REG              I2C_MEM_MAP_VALUE(0x38)
  78 +#define I2C_TWI_OUT_DLY_REG                                                    I2C_MEM_MAP_VALUE(0x3C)
  79 +
  80 +#define I2C_BUS_ERROR_FLAG     (0x1)
  81 +#define I2C_ACTION_DONE_FLAG   (0x2)
  82 +
  83 +#define CNS3xxx_I2C_ENABLE()          (I2C_CONTROLLER_REG) |= ((unsigned int)0x1 << 31)
  84 +#define CNS3xxx_I2C_DISABLE()         (I2C_CONTROLLER_REG) &= ~((unsigned int)0x1 << 31)
  85 +#define CNS3xxx_I2C_ENABLE_INTR()     (I2C_INTERRUPT_ENABLE_REG) |= 0x03
  86 +#define CNS3xxx_I2C_DISABLE_INTR()    (I2C_INTERRUPT_ENABLE_REG) &= 0xfc
  87 +
  88 +#define TWI_TIMEOUT         (10*HZ)
  89 +#define I2C_100KHZ          100000
  90 +#define I2C_200KHZ          200000
  91 +#define I2C_300KHZ          300000
  92 +#define I2C_400KHZ          400000
  93 +
  94 +#define CNS3xxx_I2C_CLK     I2C_100KHZ
  95 +
  96 +#define STATE_DONE             1
  97 +#define STATE_ERROR            2
  98 +
  99 +struct cns3xxx_i2c {
 100 +       void __iomem *base;
 101 +       wait_queue_head_t wait;
 102 +       struct i2c_adapter adap;
 103 +       struct i2c_msg *msg;
 104 +       int state;              /* see STATE_ */
 105 +       int rd_wr_len;
 106 +       u8 *buf;
 107 +};
 108 +
 109 +static u32 cns3xxx_i2c_func(struct i2c_adapter *adap)
 110 +{
 111 +       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 112 +}
 113 +
 114 +static int
 115 +cns3xxx_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg)
 116 +{
 117 +       struct cns3xxx_i2c *i2c = i2c_get_adapdata(adap);
 118 +       int i, j;
 119 +       u8 buf[1] = { 0 };
 120 +
 121 +       if (msg->len == 0) {
 122 +               /*
 123 +                *      We are probably doing a probe for a device here,
 124 +                *      so set the length to one, and data to 0
 125 +                */
 126 +               msg->len = 1;
 127 +               i2c->buf = buf;
 128 +       } else {
 129 +               i2c->buf = msg->buf;
 130 +       }
 131 +
 132 +       if (msg->flags & I2C_M_TEN) {
 133 +               printk
 134 +                       ("%s:%d: Presently the driver does not handle extended addressing\n",
 135 +                               __FUNCTION__, __LINE__);
 136 +               return -EINVAL;
 137 +       }
 138 +       i2c->msg = msg;
 139 +
 140 +       for (i = 0; i < msg->len; i++) {
 141 +               if (msg->len - i >= 4)
 142 +                       i2c->rd_wr_len = 3;
 143 +               else
 144 +                       i2c->rd_wr_len = msg->len - i - 1;
 145 +
 146 +               // Set Data Width       and TWI_EN
 147 +               I2C_CONTROLLER_REG = 0x80000000 | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
 148 +
 149 +               // Clear Write Reg
 150 +               I2C_WRITE_DATA_REG = 0;
 151 +
 152 +               // Set the slave address
 153 +               I2C_SLAVE_ADDRESS_REG = (msg->addr << 1);
 154 +
 155 +               // Are we Writing
 156 +               if (!(msg->flags & I2C_M_RD)) {
 157 +                       I2C_CONTROLLER_REG |= (1 << 4);
 158 +                       if (i != 0) {
 159 +                               /*
 160 +                                * We need to set the address in the first byte.
 161 +                                * The base address is going to be in buf[0] and then
 162 +                                * it needs to be incremented by i - 1.
 163 +                                */
 164 +                               i2c->buf--;
 165 +                               *i2c->buf = buf[0] + i - 1;
 166 +
 167 +                               if (i2c->rd_wr_len < 3) {
 168 +                                       i += i2c->rd_wr_len;
 169 +                                       i2c->rd_wr_len++;
 170 +                                       I2C_CONTROLLER_REG = 0x80000000 | (1 << 4) | (i2c->rd_wr_len << 2) | (i2c->rd_wr_len);
 171 +                               } else {
 172 +                                       i += i2c->rd_wr_len - 1;
 173 +                               }
 174 +                       } else {
 175 +                               i += i2c->rd_wr_len;
 176 +                               buf[0] = *i2c->buf;
 177 +                       }
 178 +                       for (j = 0; j <= i2c->rd_wr_len; j++) {
 179 +                               I2C_WRITE_DATA_REG |= ((*i2c->buf++) << (8 * j));
 180 +                       }
 181 +               } else {
 182 +                       i += i2c->rd_wr_len;
 183 +               }
 184 +
 185 +               // Start the Transfer
 186 +               i2c->state = 0;         // Clear out the State
 187 +               I2C_CONTROLLER_REG |= (1 << 6);
 188 +
 189 +               if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
 190 +                               (i2c->state == STATE_DONE), TWI_TIMEOUT)) {
 191 +                       if (i2c->state == STATE_ERROR) {
 192 +                               return -EIO;
 193 +                       }
 194 +               } else {
 195 +                       return -ETIMEDOUT;
 196 +               }
 197 +       }
 198 +       return 0;
 199 +}
 200 +
 201 +static int
 202 +cns3xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 203 +{
 204 +       int i;
 205 +       int ret;
 206 +       for (i = 0; i < num; i++)
 207 +       {
 208 +               ret = cns3xxx_i2c_xfer_msg(adap, &msgs[i]);
 209 +               if (ret < 0) {
 210 +                       return ret;
 211 +               }
 212 +       }
 213 +       return num;
 214 +}
 215 +
 216 +
 217 +static struct i2c_algorithm cns3xxx_i2c_algo = {
 218 +       .master_xfer = cns3xxx_i2c_xfer,
 219 +       .functionality = cns3xxx_i2c_func,
 220 +};
 221 +
 222 +static struct i2c_adapter cns3xxx_i2c_adapter = {
 223 +       .owner = THIS_MODULE,
 224 +       .algo = &cns3xxx_i2c_algo,
 225 +       .algo_data = NULL,
 226 +       .nr = 0,
 227 +       .name = "CNS3xxx I2C 0",
 228 +       .retries = 5,
 229 +};
 230 +
 231 +static void cns3xxx_i2c_adapter_init(struct cns3xxx_i2c *i2c)
 232 +{
 233 +        cns3xxx_pwr_clk_en(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
 234 +        cns3xxx_pwr_power_up(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
 235 +        cns3xxx_pwr_soft_rst(1 << PM_CLK_GATE_REG_OFFSET_SPI_PCM_I2C);
 236 +
 237 +       /* Disable the I2C */
 238 +       I2C_CONTROLLER_REG = 0; /* Disabled the I2C */
 239 +
 240 +       //enable SCL and SDA which share pin with GPIOB_PIN_EN(0x18)
 241 +       //GPIOB[12]: SCL
 242 +       //GPIOB[13]: SDA
 243 +       (*(u32*)(CNS3XXX_MISC_BASE_VIRT+0x18)) |= ((1<<12)|(1<<13));
 244 +
 245 +       MISC_IOCDB_CTRL &= ~0x300;
 246 +       MISC_IOCDB_CTRL |= 0x300; //21mA...
 247 +
 248 +       /* Check the Reg Dump when testing */
 249 +       I2C_TIME_OUT_REG =
 250 +           ((((((cns3xxx_cpu_clock()*(1000000/8)) / (2 * CNS3xxx_I2C_CLK)) -
 251 +               1) & 0x3FF) << 8) | (1 << 7) | 0x7F);
 252 +       I2C_TWI_OUT_DLY_REG |= 0x3;
 253 +
 254 +       /* Enable The Interrupt */
 255 +       CNS3xxx_I2C_ENABLE_INTR();
 256 +
 257 +       /* Clear Interrupt Status (0x2 | 0x1) */
 258 +       I2C_INTERRUPT_STATUS_REG |= (I2C_ACTION_DONE_FLAG | I2C_BUS_ERROR_FLAG);
 259 +
 260 +       /* Enable the I2C Controller */
 261 +       CNS3xxx_I2C_ENABLE();
 262 +}
 263 +
 264 +static irqreturn_t cns3xxx_i2c_isr(int irq, void *dev_id)
 265 +{
 266 +       struct cns3xxx_i2c *i2c = dev_id;
 267 +       int i;
 268 +       uint32_t stat = I2C_INTERRUPT_STATUS_REG;
 269 +
 270 +       /* Clear Interrupt */
 271 +       I2C_INTERRUPT_STATUS_REG |= 0x1;
 272 +
 273 +       if (stat & I2C_BUS_ERROR_FLAG) {
 274 +               i2c->state = STATE_ERROR;
 275 +       } else {
 276 +               if (i2c->msg->flags & I2C_M_RD) {
 277 +                       for (i = 0; i <= i2c->rd_wr_len; i++)
 278 +                       {
 279 +                               *i2c->buf++ = ((I2C_READ_DATA_REG >> (8 * i)) & 0xff);
 280 +                       }
 281 +               }
 282 +               i2c->state = STATE_DONE;
 283 +       }
 284 +       wake_up(&i2c->wait);
 285 +       return IRQ_HANDLED;
 286 +}
 287 +
 288 +static int __devinit cns3xxx_i2c_probe(struct platform_device *pdev)
 289 +{
 290 +       struct cns3xxx_i2c *i2c;
 291 +       struct resource *res, *res2;
 292 +       int ret;
 293 +
 294 +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 295 +       if (!res) {
 296 +               printk("%s: IORESOURCE_MEM not defined \n", __FUNCTION__);
 297 +               return -ENODEV;
 298 +       }
 299 +
 300 +       res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 301 +       if (!res2) {
 302 +               printk("%s: IORESOURCE_IRQ not defined \n", __FUNCTION__);
 303 +               return -ENODEV;
 304 +       }
 305 +
 306 +       i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
 307 +       if (!i2c)
 308 +               return -ENOMEM;
 309 +
 310 +       if (!request_mem_region(res->start, res->end - res->start + 1,
 311 +                               pdev->name)) {
 312 +               dev_err(&pdev->dev, "Memory region busy\n");
 313 +               ret = -EBUSY;
 314 +               goto request_mem_failed;
 315 +       }
 316 +
 317 +       i2c->base = ioremap(res->start, res->end - res->start + 1);
 318 +       if (!i2c->base) {
 319 +               dev_err(&pdev->dev, "Unable to map registers\n");
 320 +               ret = -EIO;
 321 +               goto map_failed;
 322 +       }
 323 +
 324 +       cns3xxx_i2c_adapter_init(i2c);
 325 +
 326 +       init_waitqueue_head(&i2c->wait);
 327 +       ret = request_irq(res2->start, cns3xxx_i2c_isr, 0, pdev->name, i2c);
 328 +       if (ret) {
 329 +               dev_err(&pdev->dev, "Cannot claim IRQ\n");
 330 +               goto request_irq_failed;
 331 +       }
 332 +
 333 +       platform_set_drvdata(pdev, i2c);
 334 +       i2c->adap = cns3xxx_i2c_adapter;
 335 +       i2c_set_adapdata(&i2c->adap, i2c);
 336 +       i2c->adap.dev.parent = &pdev->dev;
 337 +
 338 +       /* add i2c adapter to i2c tree */
 339 +       ret = i2c_add_numbered_adapter(&i2c->adap);
 340 +       if (ret) {
 341 +               dev_err(&pdev->dev, "Failed to add adapter\n");
 342 +               goto add_adapter_failed;
 343 +       }
 344 +
 345 +       return 0;
 346 +
 347 +      add_adapter_failed:
 348 +       free_irq(res2->start, i2c);
 349 +      request_irq_failed:
 350 +       iounmap(i2c->base);
 351 +      map_failed:
 352 +       release_mem_region(res->start, res->end - res->start + 1);
 353 +      request_mem_failed:
 354 +       kfree(i2c);
 355 +
 356 +       return ret;
 357 +}
 358 +
 359 +static int __devexit cns3xxx_i2c_remove(struct platform_device *pdev)
 360 +{
 361 +       struct cns3xxx_i2c *i2c = platform_get_drvdata(pdev);
 362 +       struct resource *res;
 363 +
 364 +       /* disable i2c logic */
 365 +       CNS3xxx_I2C_DISABLE_INTR();
 366 +       CNS3xxx_I2C_DISABLE();
 367 +       /* remove adapter & data */
 368 +       i2c_del_adapter(&i2c->adap);
 369 +       platform_set_drvdata(pdev, NULL);
 370 +
 371 +       res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 372 +       if (res)
 373 +               free_irq(res->start, i2c);
 374 +
 375 +       iounmap(i2c->base);
 376 +
 377 +       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 378 +       if (res)
 379 +               release_mem_region(res->start, res->end - res->start + 1);
 380 +
 381 +       kfree(i2c);
 382 +
 383 +       return 0;
 384 +}
 385 +
 386 +#ifdef CONFIG_PM
 387 +#warning "CONFIG_PM defined: suspend and resume not implemented"
 388 +#define cns3xxx_i2c_suspend    NULL
 389 +#define cns3xxx_i2c_resume     NULL
 390 +#else
 391 +#define cns3xxx_i2c_suspend    NULL
 392 +#define cns3xxx_i2c_resume     NULL
 393 +#endif
 394 +
 395 +static struct platform_driver cns3xxx_i2c_driver = {
 396 +       .probe = cns3xxx_i2c_probe,
 397 +       .remove = cns3xxx_i2c_remove,
 398 +       .suspend = cns3xxx_i2c_suspend,
 399 +       .resume = cns3xxx_i2c_resume,
 400 +       .driver = {
 401 +               .owner = THIS_MODULE,
 402 +               .name = "cns3xxx-i2c",
 403 +       },
 404 +};
 405 +
 406 +static int __init cns3xxx_i2c_init(void)
 407 +{
 408 +       return platform_driver_register(&cns3xxx_i2c_driver);
 409 +}
 410 +
 411 +static void __exit cns3xxx_i2c_exit(void)
 412 +{
 413 +       platform_driver_unregister(&cns3xxx_i2c_driver);
 414 +}
 415 +
 416 +module_init(cns3xxx_i2c_init);
 417 +module_exit(cns3xxx_i2c_exit);
 418 +
 419 +MODULE_AUTHOR("Cavium Networks");
 420 +MODULE_DESCRIPTION("Cavium CNS3XXX I2C Controller");
 421 +MODULE_LICENSE("GPL");