2 * Custom OID/ioctl definitions for
3 * Broadcom 802.11abg Networking Device Driver
5 * Definitions subject to change without notice.
7 * Copyright 2004, Broadcom Corporation
10 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
11 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
12 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
13 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
22 #include <proto/ethernet.h>
23 #include <proto/802.11.h>
26 #define PACKED __attribute__((packed))
31 #define WL_NUMRATES 255 /* max # of rates in a rateset */
33 typedef struct wl_rateset
{
34 uint32 count
; /* # rates in this set */
35 uint8 rates
[WL_NUMRATES
]; /* rates in 500kbps units w/hi bit set if basic */
38 #define WL_CHANSPEC_CHAN_MASK 0x0fff
39 #define WL_CHANSPEC_BAND_MASK 0xf000
40 #define WL_CHANSPEC_BAND_SHIFT 12
41 #define WL_CHANSPEC_BAND_A 0x1000
42 #define WL_CHANSPEC_BAND_B 0x2000
45 * Per-bss information structure.
48 #define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */
49 #define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */
51 typedef struct wl_bss_info106
{
52 uint version
; /* version field */
53 struct ether_addr BSSID
;
56 uint8 Privacy
; /* 0=No WEP, 1=Use WEP */
57 int16 RSSI
; /* receive signal strength (in dBm) */
58 uint16 beacon_period
; /* units are Kusec */
59 uint16 atim_window
; /* units are Kusec */
60 uint8 channel
; /* Channel no. */
61 int8 infra
; /* 0=IBSS, 1=infrastructure, 2=unknown */
63 uint count
; /* # rates in this set */
64 uint8 rates
[12]; /* rates in 500kbps units w/hi bit set if basic */
65 } rateset
; /* supported rates */
66 uint8 dtim_period
; /* DTIM period */
67 int8 phy_noise
; /* noise right after tx (in dBm) */
68 uint16 capability
; /* Capability information */
69 struct dot11_bcn_prb
*prb
; /* probe response frame (ioctl na) */
70 uint16 prb_len
; /* probe response frame length (ioctl na) */
72 uint8 supported
; /* wpa supported */
73 uint8 multicast
; /* multicast cipher */
74 uint8 ucount
; /* count of unicast ciphers */
75 uint8 unicast
[4]; /* unicast ciphers */
76 uint8 acount
; /* count of auth modes */
77 uint8 auth
[4]; /* Authentication modes */
81 typedef struct wl_bss_info
{
82 uint32 version
; /* version field */
83 uint32 length
; /* byte length of data in this record, starting at version and including IEs */
84 struct ether_addr BSSID
;
85 uint16 beacon_period
; /* units are Kusec */
86 uint16 capability
; /* Capability information */
90 uint count
; /* # rates in this set */
91 uint8 rates
[16]; /* rates in 500kbps units w/hi bit set if basic */
92 } rateset
; /* supported rates */
93 uint8 channel
; /* Channel no. */
94 uint16 atim_window
; /* units are Kusec */
95 uint8 dtim_period
; /* DTIM period */
96 int16 RSSI
; /* receive signal strength (in dBm) */
97 int8 phy_noise
; /* noise (in dBm) */
98 uint32 ie_length
; /* byte length of Information Elements */
99 /* variable length Information Elements */
102 typedef struct wlc_ssid
{
107 typedef struct wl_scan_params
{
108 wlc_ssid_t ssid
; /* default is {0, ""} */
109 struct ether_addr bssid
;/* default is bcast */
110 int8 bss_type
; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
111 int8 scan_type
; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
112 int32 nprobes
; /* -1 use default, number of probes per channel */
113 int32 active_time
; /* -1 use default, dwell time per channel for active scanning */
114 int32 passive_time
; /* -1 use default, dwell time per channel for passive scanning */
115 int32 home_time
; /* -1 use default, dwell time for the home channel between channel scans */
116 int32 channel_num
; /* 0 use default (all available channels), count of channels in channel_list */
117 uint16 channel_list
[1]; /* list of chanspecs */
119 /* size of wl_scan_params not including variable length array */
120 #define WL_SCAN_PARAMS_FIXED_SIZE 64
122 typedef struct wl_scan_results
{
126 wl_bss_info_t bss_info
[1];
128 /* size of wl_scan_results not including variable length array */
129 #define WL_SCAN_RESULTS_FIXED_SIZE 12
132 typedef struct wl_uint32_list
{
133 /* in - # of elements, out - # of entries */
135 /* variable length uint32 list */
139 #define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */
141 typedef struct wl_channels_in_country
{
144 char country_abbrev
[WLC_CNTRY_BUF_SZ
];
147 } wl_channels_in_country_t
;
149 typedef struct wl_country_list
{
154 char country_abbrev
[1];
157 #define WL_RM_TYPE_BASIC 1
158 #define WL_RM_TYPE_CCA 2
159 #define WL_RM_TYPE_RPI 3
161 #define WL_RM_FLAG_PARALLEL (1<<0)
163 #define WL_RM_FLAG_LATE (1<<1)
164 #define WL_RM_FLAG_INCAPABLE (1<<2)
165 #define WL_RM_FLAG_REFUSED (1<<3)
167 typedef struct wl_rm_req_elt
{
171 uint32 token
; /* token for this measurement */
172 uint32 tsf_h
; /* TSF high 32-bits of Measurement start time */
173 uint32 tsf_l
; /* TSF low 32-bits */
174 uint32 dur
; /* TUs */
177 typedef struct wl_rm_req
{
178 uint32 token
; /* overall measurement set token */
179 uint32 count
; /* number of measurement reqests */
180 wl_rm_req_elt_t req
[1]; /* variable length block of requests */
182 #define WL_RM_REQ_FIXED_LEN 8
184 typedef struct wl_rm_rep_elt
{
188 uint32 token
; /* token for this measurement */
189 uint32 tsf_h
; /* TSF high 32-bits of Measurement start time */
190 uint32 tsf_l
; /* TSF low 32-bits */
191 uint32 dur
; /* TUs */
192 uint32 len
; /* byte length of data block */
193 uint8 data
[1]; /* variable length data block */
195 #define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
197 #define WL_RPI_REP_BIN_NUM 8
198 typedef struct wl_rm_rpi_rep
{
199 uint8 rpi
[WL_RPI_REP_BIN_NUM
];
200 int8 rpi_max
[WL_RPI_REP_BIN_NUM
];
203 typedef struct wl_rm_rep
{
204 uint32 token
; /* overall measurement set token */
205 uint32 len
; /* length of measurement report block */
206 wl_rm_rep_elt_t rep
[1]; /* variable length block of reports */
208 #define WL_RM_REP_FIXED_LEN 8
211 #define WLC_MAX_KEY_SIZE 32 /* max size of any key */
212 #define WLC_MAX_IV_SIZE 16 /* max size of any IV */
213 #define WLC_EXT_IV_FLAG (1<<5) /* flag to indicate IV is > 4 bytes */
214 #define WLC_MAX_DEFAULT_KEYS 4 /* # of default WEP keys */
215 #define WLC_MAX_KEYS 54 /* Max # of WEP keys */
216 #define WLC_WEP1_KEY_SIZE 5 /* max size of any WEP key */
217 #define WLC_WEP1_KEY_HEX_SIZE 10 /* size of WEP key in hex. */
218 #define WLC_WEP128_KEY_SIZE 13 /* max size of any WEP key */
219 #define WLC_WEP128_KEY_HEX_SIZE 26 /* size of WEP key in hex. */
220 #define WLC_TKIP_MIC_SIZE 8 /* size of TKIP MIC */
221 #define WLC_TKIP_EOM_SIZE 7 /* max size of TKIP EOM */
222 #define WLC_TKIP_EOM_FLAG 0x5a /* TKIP EOM flag byte */
223 #define WLC_TKIP_KEY_SIZE 32 /* size of any TKIP key */
224 #define WLC_TKIP_MIC_AUTH_TX 16 /* offset to Authenticator MIC TX key */
225 #define WLC_TKIP_MIC_AUTH_RX 24 /* offset to Authenticator MIC RX key */
226 #define WLC_TKIP_MIC_SUP_RX 16 /* offset to Supplicant MIC RX key */
227 #define WLC_TKIP_MIC_SUP_TX 24 /* offset to Supplicant MIC TX key */
228 #define WLC_TKIP_P1_KEY_SIZE 10 /* size of TKHash Phase1 output, in bytes */
229 #define WLC_TKIP_P2_KEY_SIZE 16 /* size of TKHash Phase2 output */
230 #define WLC_AES_KEY_SIZE 16 /* size of AES key */
233 typedef enum sup_auth_status
{
234 WLC_SUP_DISCONNECTED
= 0,
237 WLC_SUP_AUTHENTICATING
,
238 WLC_SUP_AUTHENTICATED
,
243 /* Enumerate crypto algorithms */
244 #define CRYPTO_ALGO_OFF 0
245 #define CRYPTO_ALGO_WEP1 1
246 #define CRYPTO_ALGO_TKIP 2
247 #define CRYPTO_ALGO_WEP128 3
248 #define CRYPTO_ALGO_AES_CCM 4
249 #define CRYPTO_ALGO_AES_OCB_MSDU 5
250 #define CRYPTO_ALGO_AES_OCB_MPDU 6
251 #define CRYPTO_ALGO_NALG 7
253 #define WSEC_GEN_MIC_ERROR 0x0001
254 #define WSEC_GEN_REPLAY 0x0002
256 #define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
257 #define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
258 #define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
259 #define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
262 typedef struct wlc_tkip_info
{
263 uint16 phase1
[WLC_TKIP_P1_KEY_SIZE
/sizeof(uint16
)]; /* tkhash phase1 result */
264 uint8 phase2
[WLC_TKIP_P2_KEY_SIZE
]; /* tkhash phase2 result */
269 typedef struct _wsec_iv
{
270 uint32 hi
; /* upper 32 bits of IV */
271 uint16 lo
; /* lower 16 bits of IV */
274 typedef struct wsec_key
{
275 uint32 index
; /* key index */
276 uint32 len
; /* key length */
277 uint8 data
[WLC_MAX_KEY_SIZE
]; /* key data */
278 tkip_info_t tkip_tx
; /* tkip transmit state */
279 tkip_info_t tkip_rx
; /* tkip receive state */
280 uint32 algo
; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
281 uint32 flags
; /* misc flags */
282 uint32 algo_hw
; /* cache for hw register*/
283 uint32 aes_mode
; /* cache for hw register*/
284 int iv_len
; /* IV length */
285 int iv_initialized
; /* has IV been initialized already? */
286 int icv_len
; /* ICV length */
287 wsec_iv_t rxiv
; /* Rx IV */
288 wsec_iv_t txiv
; /* Tx IV */
289 struct ether_addr ea
; /* per station */
294 typedef struct wl_wsec_key
{
295 uint32 index
; /* key index */
296 uint32 len
; /* key length */
297 uint8 data
[DOT11_MAX_KEY_SIZE
]; /* key data */
299 uint32 algo
; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
300 uint32 flags
; /* misc flags */
303 int iv_initialized
; /* has IV been initialized already? */
307 uint32 hi
; /* upper 32 bits of IV */
308 uint16 lo
; /* lower 16 bits of IV */
311 struct ether_addr ea
; /* per station */
314 /* For use with wlc_wep_key.flags */
315 #define WSEC_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
316 #define WSEC_TKIP_ERROR (1 << 2) /* Provoke deliberate error */
318 #define WSEC_MIN_PSK_LEN 8
319 #define WSEC_MAX_PSK_LEN 64
321 /* Flag for key material needing passhash'ing */
322 #define WSEC_PASSPHRASE (1<<0)
324 /* recepticle for WLC_SET_WSEC_PMK parameter */
326 ushort key_len
; /* octets in key material */
327 ushort flags
; /* key handling qualification */
328 uint8 key
[WSEC_MAX_PSK_LEN
]; /* PMK material */
331 /* wireless security bitvec */
332 #define WEP_ENABLED 1
333 #define TKIP_ENABLED 2
334 #define AES_ENABLED 4
335 #define WSEC_SWFLAG 8
337 #define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG)
338 #define WSEC_HW(wsec) (!WSEC_SW(wsec))
339 #define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED)
340 #define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED)
341 #define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED)
342 #define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
345 /* wireless authentication bit vector */
346 #define WPA_ENABLED 1
347 #define PSK_ENABLED 2
349 #define WAUTH_WPA_ENABLED(wauth) ((wauth) & WPA_ENABLED)
350 #define WAUTH_PSK_ENABLED(wauth) ((wauth) & PSK_ENABLED)
351 #define WAUTH_ENABLED(wauth) ((wauth) & (WPA_ENABLED | PSK_ENABLED))
353 /* group/mcast cipher */
354 #define WPA_MCAST_CIPHER(wsec) (((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \
355 ((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \
359 typedef struct wl_led_info
{
360 uint32 index
; /* led index */
366 * definitions for driver messages passed from WL to NAS.
368 /* Use this to recognize wpa and 802.1x driver messages. */
369 static const uint8 wl_wpa_snap_template
[] =
370 { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
372 #define WL_WPA_MSG_IFNAME_MAX 16
374 /* WPA driver message */
375 typedef struct wl_wpa_header
{
376 struct ether_header eth
;
377 struct dot11_llc_snap_header snap
;
380 /* version 2 additions */
381 char ifname
[WL_WPA_MSG_IFNAME_MAX
];
382 /* version specific data */
384 } wl_wpa_header_t PACKED
;
387 * definitions for 802.2 messages passed from WL to NAS.
389 /* This seems not to be defined outside the kernel on linux. */
391 #define ETH_P_802_2 4
394 #define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
396 /* WPA driver message ethertype - private between wlc and nas */
397 #define WL_WPA_ETHER_TYPE 0x9999
399 /* WPA driver message current version */
400 #define WL_WPA_MSG_VERSION 2
402 /* Type field values for the 802.2 driver messages for WPA. */
403 #define WLC_ASSOC_MSG 1
404 #define WLC_DISASSOC_MSG 2
405 #define WLC_PTK_MIC_MSG 3
406 #define WLC_GTK_MIC_MSG 4
408 /* Use this to recognize 802.2 driver messages. */
409 static const uint8 wpa_snap_template
[] =
410 { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
413 /* 802.1x driver message */
414 typedef struct wl_eapol_header
{
415 struct ether_header eth
;
416 struct dot11_llc_snap_header snap
;
419 char ifname
[WL_WPA_MSG_IFNAME_MAX
];
420 /* version specific data */
421 /* uint8 802_1x_msg[1]; */
422 } wl_eapol_header_t PACKED
;
424 #define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
426 /* 802.1x driver message ethertype - private between wlc and nas */
427 #define WL_EAPOL_ETHER_TYPE 0x999A
429 /* 802.1x driver message current version */
430 #define WL_EAPOL_MSG_VERSION 1
432 /* srom read/write struct passed through ioctl */
434 uint byteoff
; /* byte offset */
435 uint nbytes
; /* number of bytes */
439 /* R_REG and W_REG struct passed through ioctl */
441 uint32 byteoff
; /* byte offset of the field in d11regs_t */
442 uint32 val
; /* read/write value of the field */
443 uint32 size
; /* sizeof the field */
446 /* Structure used by GET/SET_ATTEN ioctls */
448 uint16 auto_ctrl
; /* 1: Automatic control, 0: overriden */
449 uint16 bb
; /* Baseband attenuation */
450 uint16 radio
; /* Radio attenuation */
451 uint16 txctl1
; /* Radio TX_CTL1 value */
454 /* Used to get specific STA parameters */
457 struct ether_addr ea
;
460 /* Event data type */
462 uint msg
; /* Message (see below) */
463 struct ether_addr
*addr
; /* Station address (if applicable) */
464 uint status
; /* Status code (see below) */
465 uint reason
; /* Reason code (if applicable) */
466 uint auth_type
; /* WLC_E_AUTH */
467 bool link
; /* WLC_E_LINK */
468 bool group
; /* WLC_E_MIC_ERROR */
469 bool flush_txq
; /* WLC_E_MIC_ERROR */
473 uint16 ver
; /* version of this struct */
474 uint16 cap
; /* sta's advertized capabilities */
475 uint32 flags
; /* flags defined below */
476 uint32 idle
; /* time since data pkt rx'd from sta */
477 struct ether_addr ea
; /* Station address */
478 wl_rateset_t rateset
; /* rateset in use */
481 #define WL_STA_INFO_LEN 300
485 #define WL_STA_BRCM 0x01
486 #define WL_STA_WME 0x02
487 #define WL_STA_ABCAP 0x04
488 #define WL_STA_AUTHE 0x08
489 #define WL_STA_ASSOC 0x10
490 #define WL_STA_AUTHO 0x20
493 #define WLC_E_SET_SSID 1
495 #define WLC_E_START 3
497 #define WLC_E_AUTH_IND 5
498 #define WLC_E_DEAUTH 6
499 #define WLC_E_DEAUTH_IND 7
500 #define WLC_E_ASSOC 8
501 #define WLC_E_ASSOC_IND 9
502 #define WLC_E_REASSOC 10
503 #define WLC_E_REASSOC_IND 11
504 #define WLC_E_DISASSOC 12
505 #define WLC_E_DISASSOC_IND 13
506 #define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */
507 #define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */
508 #define WLC_E_GOT_BEACONS 16
509 #define WLC_E_LINK 17 /* Link indication */
510 #define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */
511 #define WLC_E_NDIS_LINK 19 /* NDIS style link indication */
512 #define WLC_E_ROAM 20
513 #define WLC_E_LAST 21
515 /* Event status codes */
516 #define WLC_E_STATUS_SUCCESS 0
517 #define WLC_E_STATUS_FAIL 1
518 #define WLC_E_STATUS_TIMEOUT 2
519 #define WLC_E_STATUS_NO_NETWORKS 3
520 #define WLC_E_STATUS_ABORT 4
522 typedef struct wlc_event_cb
{
523 uint msg
; /* Event message or 0 for all */
524 void (*fn
)(void *, wlc_event_t
*); /* Callback function */
525 void *context
; /* Passed to callback function */
526 struct wlc_event_cb
*next
; /* Next in the chain */
530 * Country locale determines which channels are available to us.
532 typedef enum _wlc_locale
{
533 WLC_WW
= 0, /* Worldwide */
534 WLC_THA
, /* Thailand */
535 WLC_ISR
, /* Israel */
536 WLC_JDN
, /* Jordan */
540 WLC_EUR
, /* Europe */
541 WLC_USL
, /* US Low Band only */
542 WLC_JPH
, /* Japan High Band only */
543 WLC_ALL
, /* All the channels in this band */
544 WLC_11D
, /* Represents locale recieved by 11d beacons */
546 WLC_UNDEFINED_LOCALE
= 0xf
549 /* channel encoding */
550 typedef struct channel_info
{
556 /* For ioctls that take a list of MAC addresses */
558 uint count
; /* number of MAC addresses */
559 struct ether_addr ea
[1]; /* variable length array of MAC addresses */
562 /* get pkt count struct passed through ioctl */
563 typedef struct get_pktcnt
{
570 /* Linux network driver ioctl encoding */
571 typedef struct wl_ioctl
{
572 uint cmd
; /* common ioctl definition */
573 void *buf
; /* pointer to user buffer */
574 uint len
; /* length of user buffer */
575 bool set
; /* get or set request (optional) */
576 uint used
; /* bytes read or written (optional) */
577 uint needed
; /* bytes needed (optional) */
581 * Structure for passing hardware and software
582 * revision info up from the driver.
584 typedef struct wlc_rev_info
{
585 uint vendorid
; /* PCI vendor id */
586 uint deviceid
; /* device id of chip */
587 uint radiorev
; /* radio revision */
588 uint chiprev
; /* chip revision */
589 uint corerev
; /* core revision */
590 uint boardid
; /* board identifier (usu. PCI sub-device id) */
591 uint boardvendor
; /* board vendor (usu. PCI sub-vendor id) */
592 uint boardrev
; /* board revision */
593 uint driverrev
; /* driver version */
594 uint ucoderev
; /* microcode version */
595 uint bus
; /* bus type */
596 uint chipnum
; /* chip number */
599 /* check this magic number */
600 #define WLC_IOCTL_MAGIC 0x14e46c77
602 /* bump this number if you change the ioctl interface */
603 #define WLC_IOCTL_VERSION 1
605 /* maximum length buffer required */
606 #define WLC_IOCTL_MAXLEN 8192
608 /* common ioctl definitions */
609 #define WLC_GET_MAGIC 0
610 #define WLC_GET_VERSION 1
613 #define WLC_GET_LOOP 4
614 #define WLC_SET_LOOP 5
616 #define WLC_GET_MSGLEVEL 7
617 #define WLC_SET_MSGLEVEL 8
618 #define WLC_GET_PROMISC 9
619 #define WLC_SET_PROMISC 10
620 #define WLC_OBSOLETE 11
621 #define WLC_GET_RATE 12
622 #define WLC_SET_RATE 13
623 #define WLC_GET_INSTANCE 14
624 #define WLC_GET_FRAG 15
625 #define WLC_SET_FRAG 16
626 #define WLC_GET_RTS 17
627 #define WLC_SET_RTS 18
628 #define WLC_GET_INFRA 19
629 #define WLC_SET_INFRA 20
630 #define WLC_GET_AUTH 21
631 #define WLC_SET_AUTH 22
632 #define WLC_GET_BSSID 23
633 #define WLC_SET_BSSID 24
634 #define WLC_GET_SSID 25
635 #define WLC_SET_SSID 26
636 #define WLC_RESTART 27
637 #define WLC_DUMP_SCB 28
638 #define WLC_GET_CHANNEL 29
639 #define WLC_SET_CHANNEL 30
640 #define WLC_GET_SRL 31
641 #define WLC_SET_SRL 32
642 #define WLC_GET_LRL 33
643 #define WLC_SET_LRL 34
644 #define WLC_GET_PLCPHDR 35
645 #define WLC_SET_PLCPHDR 36
646 #define WLC_GET_RADIO 37
647 #define WLC_SET_RADIO 38
648 #define WLC_GET_PHYTYPE 39
649 #define WLC_DUMP_RATE 40
650 #define WLC_SET_RATE_PARAMS 41
651 #define WLC_GET_WEP 42
652 #define WLC_SET_WEP 43
653 #define WLC_GET_KEY 44
654 #define WLC_SET_KEY 45
655 #define WLC_GET_REGULATORY 46
656 #define WLC_SET_REGULATORY 47
657 #define WLC_GET_PASSIVE 48 /* added by nbd */
658 #define WLC_SET_PASSIVE 49 /* added by nbd */
660 #define WLC_SCAN_RESULTS 51
661 #define WLC_DISASSOC 52
662 #define WLC_REASSOC 53
663 #define WLC_GET_ROAM_TRIGGER 54
664 #define WLC_SET_ROAM_TRIGGER 55
665 #define WLC_GET_ROAM_DELTA 56
666 #define WLC_SET_ROAM_DELTA 57
667 #define WLC_GET_ROAM_SCAN_PERIOD 58
668 #define WLC_SET_ROAM_SCAN_PERIOD 59
670 #define WLC_GET_TXANT 61
671 #define WLC_SET_TXANT 62
672 #define WLC_GET_ANTDIV 63
673 #define WLC_SET_ANTDIV 64
674 #define WLC_GET_TXPWR 65
675 #define WLC_SET_TXPWR 66
676 #define WLC_GET_CLOSED 67
677 #define WLC_SET_CLOSED 68
678 #define WLC_GET_MACLIST 69
679 #define WLC_SET_MACLIST 70
680 #define WLC_GET_RATESET 71
681 #define WLC_SET_RATESET 72
682 #define WLC_GET_LOCALE 73
683 #define WLC_SET_LOCALE 74
684 #define WLC_GET_BCNPRD 75
685 #define WLC_SET_BCNPRD 76
686 #define WLC_GET_DTIMPRD 77
687 #define WLC_SET_DTIMPRD 78
688 #define WLC_GET_SROM 79
689 #define WLC_SET_SROM 80
690 #define WLC_GET_WEP_RESTRICT 81
691 #define WLC_SET_WEP_RESTRICT 82
692 #define WLC_GET_COUNTRY 83
693 #define WLC_SET_COUNTRY 84
694 #define WLC_GET_PM 85
695 #define WLC_SET_PM 86
696 #define WLC_GET_WAKE 87
697 #define WLC_SET_WAKE 88
698 #define WLC_GET_D11CNTS 89
699 #define WLC_GET_FORCELINK 90 /* ndis only */
700 #define WLC_SET_FORCELINK 91 /* ndis only */
701 #define WLC_FREQ_ACCURACY 92
702 #define WLC_CARRIER_SUPPRESS 93
703 #define WLC_GET_PHYREG 94
704 #define WLC_SET_PHYREG 95
705 #define WLC_GET_RADIOREG 96
706 #define WLC_SET_RADIOREG 97
707 #define WLC_GET_REVINFO 98
708 #define WLC_GET_UCANTDIV 99
709 #define WLC_SET_UCANTDIV 100
710 #define WLC_R_REG 101
711 #define WLC_W_REG 102
712 #define WLC_DIAG_LOOPBACK 103
713 #define WLC_RESET_D11CNTS 104
714 #define WLC_GET_MACMODE 105
715 #define WLC_SET_MACMODE 106
716 #define WLC_GET_MONITOR 107 /* added by nbd */
717 #define WLC_SET_MONITOR 108 /* added by nbd */
718 #define WLC_GET_GMODE 109
719 #define WLC_SET_GMODE 110
720 #define WLC_GET_LEGACY_ERP 111
721 #define WLC_SET_LEGACY_ERP 112
722 #define WLC_GET_RX_ANT 113
723 #define WLC_GET_CURR_RATESET 114 /* current rateset */
724 #define WLC_GET_SCANSUPPRESS 115
725 #define WLC_SET_SCANSUPPRESS 116
726 #define WLC_GET_AP 117
727 #define WLC_SET_AP 118
728 #define WLC_GET_EAP_RESTRICT 119
729 #define WLC_SET_EAP_RESTRICT 120
730 #define WLC_SCB_AUTHORIZE 121
731 #define WLC_SCB_DEAUTHORIZE 122
732 #define WLC_GET_WDSLIST 123
733 #define WLC_SET_WDSLIST 124
734 #define WLC_GET_ATIM 125
735 #define WLC_SET_ATIM 126
736 #define WLC_GET_RSSI 127
737 #define WLC_GET_PHYANTDIV 128
738 #define WLC_SET_PHYANTDIV 129
739 #define WLC_AP_RX_ONLY 130
740 #define WLC_GET_TX_PATH_PWR 131
741 #define WLC_SET_TX_PATH_PWR 132
742 #define WLC_GET_WSEC 133
743 #define WLC_SET_WSEC 134
744 #define WLC_GET_PHY_NOISE 135
745 #define WLC_GET_BSS_INFO 136
746 #define WLC_GET_PKTCNTS 137
747 #define WLC_GET_LAZYWDS 138
748 #define WLC_SET_LAZYWDS 139
749 #define WLC_GET_BANDLIST 140
750 #define WLC_GET_BAND 141
751 #define WLC_SET_BAND 142
752 #define WLC_SCB_DEAUTHENTICATE 143
753 #define WLC_GET_SHORTSLOT 144
754 #define WLC_GET_SHORTSLOT_OVERRIDE 145
755 #define WLC_SET_SHORTSLOT_OVERRIDE 146
756 #define WLC_GET_SHORTSLOT_RESTRICT 147
757 #define WLC_SET_SHORTSLOT_RESTRICT 148
758 #define WLC_GET_GMODE_PROTECTION 149
759 #define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
760 #define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
761 #define WLC_UPGRADE 152
762 #define WLC_GET_MRATE 153
763 #define WLC_SET_MRATE 154
764 #define WLC_GET_IGNORE_BCNS 155
765 #define WLC_SET_IGNORE_BCNS 156
766 #define WLC_GET_SCB_TIMEOUT 157
767 #define WLC_SET_SCB_TIMEOUT 158
768 #define WLC_GET_ASSOCLIST 159
769 #define WLC_GET_CLK 160
770 #define WLC_SET_CLK 161
771 #define WLC_GET_UP 162
773 #define WLC_GET_WPA_AUTH 164
774 #define WLC_SET_WPA_AUTH 165
775 #define WLC_GET_UCFLAGS 166
776 #define WLC_SET_UCFLAGS 167
777 #define WLC_GET_PWRIDX 168
778 #define WLC_SET_PWRIDX 169
779 #define WLC_GET_TSSI 170
780 #define WLC_GET_SUP_RATESET_OVERRIDE 171
781 #define WLC_SET_SUP_RATESET_OVERRIDE 172
782 #define WLC_SET_FAST_TIMER 173
783 #define WLC_GET_FAST_TIMER 174
784 #define WLC_SET_SLOW_TIMER 175
785 #define WLC_GET_SLOW_TIMER 176
786 #define WLC_DUMP_PHYREGS 177
787 #define WLC_GET_GMODE_PROTECTION_CONTROL 178
788 #define WLC_SET_GMODE_PROTECTION_CONTROL 179
789 #define WLC_GET_PHYLIST 180
790 #define WLC_ENCRYPT_STRENGTH 181 /* ndis only */
791 #define WLC_DECRYPT_STATUS 182 /* ndis only */
792 #define WLC_GET_KEY_SEQ 183
793 #define WLC_GET_SCAN_CHANNEL_TIME 184
794 #define WLC_SET_SCAN_CHANNEL_TIME 185
795 #define WLC_GET_SCAN_UNASSOC_TIME 186
796 #define WLC_SET_SCAN_UNASSOC_TIME 187
797 #define WLC_GET_SCAN_HOME_TIME 188
798 #define WLC_SET_SCAN_HOME_TIME 189
799 #define WLC_GET_SCAN_PASSES 190
800 #define WLC_SET_SCAN_PASSES 191
801 #define WLC_GET_PRB_RESP_TIMEOUT 192
802 #define WLC_SET_PRB_RESP_TIMEOUT 193
803 #define WLC_GET_ATTEN 194
804 #define WLC_SET_ATTEN 195
805 #define WLC_GET_SHMEM 196 /* diag */
806 #define WLC_SET_SHMEM 197 /* diag */
807 #define WLC_GET_GMODE_PROTECTION_CTS 198
808 #define WLC_SET_GMODE_PROTECTION_CTS 199
809 #define WLC_SET_TKIP_MIC_FLAG 200
810 #define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
811 #define WLC_TKIP_COUNTERMEASURES 202
812 #define WLC_GET_PIOMODE 203
813 #define WLC_SET_PIOMODE 204
814 #define WLC_SET_LED 209
815 #define WLC_GET_LED 210
816 #define WLC_GET_INTERFERENCE_MODE 211
817 #define WLC_SET_INTERFERENCE_MODE 212
818 #define WLC_GET_CHANNEL_QA 213
819 #define WLC_START_CHANNEL_QA 214
820 #define WLC_GET_CHANNEL_SEL 215
821 #define WLC_START_CHANNEL_SEL 216
822 #define WLC_GET_VALID_CHANNELS 217
823 #define WLC_GET_FAKEFRAG 218
824 #define WLC_SET_FAKEFRAG 219
825 #define WLC_GET_PWROUT_PERCENTAGE 220
826 #define WLC_SET_PWROUT_PERCENTAGE 221
827 #define WLC_SET_BAD_FRAME_PREEMPT 222
828 #define WLC_GET_BAD_FRAME_PREEMPT 223
829 #define WLC_SET_LEAP_LIST 224
830 #define WLC_GET_LEAP_LIST 225
831 #define WLC_GET_CWMIN 226
832 #define WLC_SET_CWMIN 227
833 #define WLC_GET_CWMAX 228
834 #define WLC_SET_CWMAX 229
835 #define WLC_GET_WET 230
836 #define WLC_SET_WET 231
837 #define WLC_GET_KEY_PRIMARY 235
838 #define WLC_SET_KEY_PRIMARY 236
839 #define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */
840 #define WLC_SET_CS_SCAN_TIMER 248
841 #define WLC_GET_CS_SCAN_TIMER 249
842 #define WLC_CURRENT_PWR 256
843 #define WLC_GET_CHANNELS_IN_COUNTRY 260
844 #define WLC_GET_COUNTRY_LIST 261
845 #define WLC_GET_VAR 262 /* get value of named variable */
846 #define WLC_SET_VAR 263 /* set named variable to value */
847 #define WLC_NVRAM_GET 264
848 #define WLC_NVRAM_SET 265
849 #define WLC_SET_WSEC_PMK 268
850 #define WLC_GET_AUTH_MODE 269
851 #define WLC_SET_AUTH_MODE 270
852 #define WLC_LAST 273 /* do not change - use get_var/set_var */
855 * Minor kludge alert:
856 * Duplicate a few definitions that irelay requires from epiioctl.h here
857 * so caller doesn't have to include this file and epiioctl.h .
858 * If this grows any more, it would be time to move these irelay-specific
859 * definitions out of the epiioctl.h and into a separate driver common file.
861 #ifndef EPICTRL_COOKIE
862 #define EPICTRL_COOKIE 0xABADCEDE
865 /* vx wlc ioctl's offset */
866 #define CMN_IOCTL_OFF 0x180
871 * 0xFF - implementation specific OID
872 * 0xE4 - first byte of Broadcom PCI vendor ID
873 * 0x14 - second byte of Broadcom PCI vendor ID
874 * 0xXX - the custom OID number
877 /* begin 0x1f values beyond the start of the ET driver range. */
878 #define WL_OID_BASE 0xFFE41420
881 #define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
882 #define OID_WL_GET_FORCELINK (WL_OID_BASE + WLC_GET_FORCELINK)
883 #define OID_WL_SET_FORCELINK (WL_OID_BASE + WLC_SET_FORCELINK)
884 #define OID_WL_ENCRYPT_STRENGTH (WL_OID_BASE + WLC_ENCRYPT_STRENGTH)
885 #define OID_WL_DECRYPT_STATUS (WL_OID_BASE + WLC_DECRYPT_STATUS)
887 #define WL_DECRYPT_STATUS_SUCCESS 1
888 #define WL_DECRYPT_STATUS_FAILURE 2
889 #define WL_DECRYPT_STATUS_UNKNOWN 3
891 /* allows user-mode app to poll the status of USB image upgrade */
892 #define WLC_UPGRADE_SUCCESS 0
893 #define WLC_UPGRADE_PENDING 1
895 /* Bit masks for radio disabled status - returned by WL_GET_RADIO */
896 #define WL_RADIO_SW_DISABLE (1<<0)
897 #define WL_RADIO_HW_DISABLE (1<<1)
899 /* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
900 #define WL_TXPWR_OVERRIDE (1<<31)
904 #define WL_SB_BUS 0 /* Silicon Backplane */
905 #define WL_PCI_BUS 1 /* PCI target */
906 #define WL_PCMCIA_BUS 2 /* PCMCIA target */
909 #define WLC_BAND_AUTO 0 /* auto-select */
910 #define WLC_BAND_A 1 /* "a" band (5 Ghz) */
911 #define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */
914 #define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
915 #define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
916 #define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
919 /* 54g modes (basic bits may still be overridden) */
920 #define GMODE_LEGACY_B 0 /* Rateset: 1b, 2b, 5.5, 11 */
923 #define GMODE_AUTO 1 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
924 /* Extended Rateset: 6, 9, 12, 48 */
926 /* Shortslot: Auto */
927 #define GMODE_ONLY 2 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54 */
928 /* Extended Rateset: 6b, 9, 12b, 48 */
929 /* Preamble: Short required */
930 /* Shortslot: Auto */
931 #define GMODE_B_DEFERRED 3 /* Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54 */
932 /* Extended Rateset: 6, 9, 12, 48 */
935 #define GMODE_PERFORMANCE 4 /* Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54 */
936 /* Preamble: Short required */
937 /* Shortslot: On and required */
938 #define GMODE_LRS 5 /* Rateset: 1b, 2b, 5.5b, 11b */
939 /* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54 */
941 /* Shortslot: Auto */
945 /* values for PLCPHdr_override */
946 #define WLC_PLCP_AUTO -1
947 #define WLC_PLCP_SHORT 0
948 #define WLC_PLCP_LONG 1
950 /* values for g_protection_override */
951 #define WLC_G_PROTECTION_AUTO -1
952 #define WLC_G_PROTECTION_OFF 0
953 #define WLC_G_PROTECTION_ON 1
955 /* values for g_protection_control */
956 #define WLC_G_PROTECTION_CTL_OFF 0
957 #define WLC_G_PROTECTION_CTL_LOCAL 1
958 #define WLC_G_PROTECTION_CTL_OVERLAP 2
965 /* interference mitigation options */
966 #define INTERFERE_NONE 0 /* off */
967 #define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */
968 #define WLAN_MANUAL 2 /* ACI: no auto detection */
969 #define WLAN_AUTO 3 /* ACI: auto - detact */
972 #define WL_ERROR_VAL 0x0001
973 #define WL_TRACE_VAL 0x0002
974 #define WL_PRHDRS_VAL 0x0004
975 #define WL_PRPKT_VAL 0x0008
976 #define WL_INFORM_VAL 0x0010
977 #define WL_TMP_VAL 0x0020
978 #define WL_OID_VAL 0x0040
979 #define WL_RATE_VAL 0x0080
980 #define WL_ASSOC_VAL 0x0100
981 #define WL_PRUSR_VAL 0x0200
982 #define WL_PS_VAL 0x0400
983 #define WL_TXPWR_VAL 0x0800
984 #define WL_GMODE_VAL 0x1000
985 #define WL_DUAL_VAL 0x2000
986 #define WL_WSEC_VAL 0x4000
987 #define WL_WSEC_DUMP_VAL 0x8000
988 #define WL_LOG_VAL 0x10000
989 #define WL_NRSSI_VAL 0x20000
990 #define WL_LOFT_VAL 0x40000
991 #define WL_REGULATORY_VAL 0x80000
992 #define WL_ACI_VAL 0x100000
995 /* 802.11h enforcement levels */
996 #define SPECT_MNGMT_OFF 0 /* 11h disabled */
997 #define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */
998 /* when 11h is enabled */
999 #define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */
1003 /* max # of leds supported by GPIO (gpio pin# == led index#) */
1004 #define WL_LED_NUMGPIO 16 /* gpio 0-15 */
1006 /* led per-pin behaviors */
1007 #define WL_LED_OFF 0 /* always off */
1008 #define WL_LED_ON 1 /* always on */
1009 #define WL_LED_ACTIVITY 2 /* activity */
1010 #define WL_LED_RADIO 3 /* radio enabled */
1011 #define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */
1012 #define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */
1013 #define WL_LED_BGMODE 6 /* on if gmode, off if bmode */
1014 #define WL_LED_WI1 7
1015 #define WL_LED_WI2 8
1016 #define WL_LED_WI3 9
1017 #define WL_LED_ASSOC 10 /* associated state indicator */
1018 #define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */
1019 #define WL_LED_NUMBEHAVIOR 12
1021 /* led behavior numeric value format */
1022 #define WL_LED_BEH_MASK 0x7f /* behavior mask */
1023 #define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */
1026 /* maximum channels */
1027 #define WL_NUMCHANNELS 64 /* max # of channels in the band */
1030 #define WL_RATE_OFDM(r) (((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \
1031 ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \
1032 ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \
1033 ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108)
1035 /* WDS link local endpoint WPA role */
1036 #define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
1037 #define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
1038 #define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
1040 /* afterburner_override */
1041 #define ABO_AUTO -1 /* auto - no override */
1042 #define ABO_OFF 0 /* force afterburner off */
1043 #define ABO_ON 1 /* force afterburner on */
1047 #endif /* _wlioctl_h_ */