package/mac80211/patches/001-disable_drivers.patch

   1 diff -urN compat-wireless-2008-08-06/config.mk compat-wireless-2008-08-06.new/config.mk
   2 --- compat-wireless-2008-08-06/config.mk        2008-07-18 06:11:03.000000000 +0200
   3 +++ compat-wireless-2008-08-06.new/config.mk    2008-08-20 17:30:13.000000000 +0200
   4 @@ -72,70 +72,6 @@
   5  CONFIG_ATH5K=m
   6  CONFIG_ATH5K_DEBUG=n
   7
   8 -# Required for older kernels which still use this flag.
   9 -CONFIG_IWLWIFI=m
  10 -
  11 -CONFIG_IWLCORE=m
  12 -CONFIG_IWL3945=m
  13 -CONFIG_IWL4965=m
  14 -CONFIG_IWL4965_HT=y
  15 -CONFIG_B43=m
  16 -# B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI
  17 -# Example, bcm4318:
  18 -# http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module
  19 -CONFIG_B43_PCMCIA=y
  20 -CONFIG_B43_DMA=y
  21 -CONFIG_B43_PIO=y
  22 -# B43_PIO selects SSB_BLOCKIO
  23 -CONFIG_SSB_BLOCKIO=y
  24 -CONFIG_B43_DMA_AND_PIO_MODE=y
  25 -CONFIG_B43_PCI_AUTOSELECT=y
  26 -CONFIG_B43_PCICORE_AUTOSELECT=y
  27 -#CONFIG_B43_RFKILL=n
  28 -CONFIG_B43_LEDS=y
  29 -# CONFIG_B43_DEBUG is not set
  30 -
  31 -CONFIG_B43LEGACY=m
  32 -CONFIG_B43LEGACY_PCI_AUTOSELECT=y
  33 -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
  34 -CONFIG_B43LEGACY_DMA=y
  35 -CONFIG_B43LEGACY_PIO=y
  36 -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
  37 -
  38 -# The Intel ipws
  39 -CONFIG_IPW2100=m
  40 -CONFIG_IPW2100_MONITOR=y
  41 -CONFIG_IPW2200=m
  42 -CONFIG_IPW2200_MONITOR=y
  43 -CONFIG_IPW2200_RADIOTAP=y
  44 -CONFIG_IPW2200_PROMISCUOUS=y
  45 -# The above enables use a second interface prefixed 'rtap'.
  46 -#           Example usage:
  47 -#
  48 -# % modprobe ipw2200 rtap_iface=1
  49 -# % ifconfig rtap0 up
  50 -# % tethereal -i rtap0
  51 -#
  52 -# If you do not specify 'rtap_iface=1' as a module parameter then
  53 -# the rtap interface will not be created and you will need to turn
  54 -# it on via sysfs:
  55 -#
  56 -# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
  57 -CONFIG_IPW2200_QOS=y
  58 -
  59 -NEED_IEEE80211=y
  60 -
  61 -CONFIG_P54_PCI=m
  62 -
  63 -CONFIG_SSB_PCIHOST_POSSIBLE=y
  64 -CONFIG_SSB_PCIHOST=y
  65 -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
  66 -CONFIG_SSB_DRIVER_PCICORE=y
  67 -CONFIG_SSB_B43_PCI_BRIDGE=y
  68 -
  69 -CONFIG_RTL8180=m
  70 -CONFIG_ADM8211=m
  71 -
  72  CONFIG_RT2X00_LIB_PCI=m
  73  CONFIG_RT2400PCI=m
  74  CONFIG_RT2500PCI=m
  75 @@ -159,32 +95,6 @@
  76  ifneq ($(CONFIG_USB),)
  77  CONFIG_ZD1211RW=m
  78
  79 -# support for USB Wireless devices using Atmel at76c503,
  80 -# at76c505 or at76c505a chips.
  81 -CONFIG_USB_ATMEL=m
  82 -
  83 -# Stuff here things which depend on kernel versions for USB
  84 -ifeq ($(shell test -e $(KLIB_BUILD)/Makefile && echo yes),yes)
  85 -KERNEL_SUBLEVEL = $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
  86 -ifeq ($(shell test $(KERNEL_SUBLEVEL) -gt 21 && echo yes),yes)
  87 -
  88 -# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
  89 -
  90 -# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC
  91 -# All of these devices are based on Broadcom 4320 chip which
  92 -# is only wireless RNDIS chip known to date.
  93 -# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
  94 -# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
  95 -CONFIG_USB_NET_RNDIS_HOST=m
  96 -CONFIG_USB_NET_RNDIS_WLAN=m
  97 -CONFIG_USB_NET_CDCETHER=m
  98 -
  99 -endif
 100 -endif
 101 -
 102 -CONFIG_P54_USB=m
 103 -CONFIG_RTL8187=m
 104 -
 105  # RT2500USB does not require firmware
 106  CONFIG_RT2500USB=m
 107  CONFIG_RT2X00_LIB_USB=m
 108 @@ -209,39 +119,6 @@
 109  CONFIG_RT2X00_LIB_FIRMWARE=y
 110  endif
 111
 112 -# p54
 113 -CONFIG_P54_COMMON=m
 114 -
 115 -# Sonics Silicon Backplane
 116 -CONFIG_SSB_POSSIBLE=y
 117 -CONFIG_SSB=m
 118 -CONFIG_SSB_SPROM=y
 119 -
 120 -ifneq ($(CONFIG_PCMCIA),)
 121 -CONFIG_SSB_PCMCIAHOST=y
 122 -endif
 123 -
 124 -# These two are for mips
 125 -CONFIG_SSB_DRIVER_MIPS=n
 126 -CONFIG_SSB_PCICORE_HOSTMODE=n
 127 -# CONFIG_SSB_DEBUG is not set
 128 -# CONFIG_SSB_DRIVER_EXTIF=y
 129 -
 130 -ifneq ($(CONFIG_USB),)
 131 -CONFIG_LIBERTAS_USB=m
 132 -NEED_LIBERTAS=y
 133 -endif
 134 -ifneq ($(CONFIG_PCMCIA),)
 135 -CONFIG_LIBERTAS_CS=m
 136 -NEED_LIBERTAS=y
 137 -endif
 138 -ifeq ($(NEED_LIBERTAS),y)
 139 -CONFIG_LIBERTAS=m
 140 -# Libertas uses the old stack but not fully, it will soon
 141 -# be cleaned.
 142 -NEED_IEEE80211=y
 143 -endif
 144 -
 145  ifeq ($(NEED_IEEE80211),y)
 146  # Old ieee80211 "stack"
 147  # Note: old softmac is scheduled for removal so we