Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
[openwrt.git] / package / madwifi / patches / 384-hwdetect.patch
1 --- a/ath/if_ath.c
2 +++ b/ath/if_ath.c
3 @@ -62,6 +62,7 @@
4 #include <linux/if_arp.h>
5 #include <linux/rtnetlink.h>
6 #include <linux/time.h>
7 +#include <linux/pci.h>
8 #include <asm/uaccess.h>
9
10 #include "if_ethersubr.h" /* for ETHER_IS_MULTICAST */
11 @@ -401,6 +402,15 @@ static int outdoor = -1;
12 static int xchanmode = -1;
13 static int beacon_cal = 1;
14
15 +static const struct ath_hw_detect generic_hw_info = {
16 + .vendor_name = "Unknown",
17 + .card_name = "Generic",
18 + .vendor = PCI_ANY_ID,
19 + .id = PCI_ANY_ID,
20 + .subvendor = PCI_ANY_ID,
21 + .subid = PCI_ANY_ID
22 +};
23 +
24 static const char *hal_status_desc[] = {
25 "No error",
26 "No hardware present or device not yet supported",
27 @@ -542,6 +552,8 @@ ath_attach(u_int16_t devid, struct net_d
28 DPRINTF(sc, ATH_DEBUG_ANY, "%s: devid 0x%x\n", __func__, devid);
29 #endif
30
31 + sc->sc_hwinfo = &generic_hw_info;
32 +
33 /* Allocate space for dynamically determined maximum VAP count */
34 sc->sc_bslot =
35 kmalloc(ath_maxvaps * sizeof(struct ieee80211vap*), GFP_KERNEL);
36 @@ -1508,6 +1520,29 @@ ath_vap_create(struct ieee80211com *ic,
37 return vap;
38 }
39
40 +void
41 +ath_hw_detect(struct ath_softc *sc, const struct ath_hw_detect *cards, int n_cards, u32 vendor, u32 id, u32 subvendor, u32 subid)
42 +{
43 + int i;
44 +
45 + for (i = 0; i < n_cards; i++) {
46 + const struct ath_hw_detect *c = &cards[i];
47 +
48 + if ((c->vendor != PCI_ANY_ID) && c->vendor != vendor)
49 + continue;
50 + if ((c->id != PCI_ANY_ID) && c->id != id)
51 + continue;
52 + if ((c->subvendor != PCI_ANY_ID) && c->subvendor != subvendor)
53 + continue;
54 + if ((c->subid != PCI_ANY_ID) && c->subid != subid)
55 + continue;
56 +
57 + sc->sc_hwinfo = c;
58 + sc->sc_poweroffset = c->poweroffset;
59 + break;
60 + }
61 +}
62 +
63 static void
64 ath_vap_delete(struct ieee80211vap *vap)
65 {
66 @@ -10225,6 +10260,7 @@ static u_int32_t
67 ath_set_clamped_maxtxpower(struct ath_softc *sc,
68 u_int32_t new_clamped_maxtxpower)
69 {
70 + new_clamped_maxtxpower -= sc->sc_poweroffset;
71 (void)ath_hal_settxpowlimit(sc->sc_ah, new_clamped_maxtxpower);
72 return ath_get_clamped_maxtxpower(sc);
73 }
74 @@ -10238,6 +10274,7 @@ ath_get_clamped_maxtxpower(struct ath_so
75 {
76 u_int32_t clamped_maxtxpower;
77 (void)ath_hal_getmaxtxpow(sc->sc_ah, &clamped_maxtxpower);
78 + clamped_maxtxpower += sc->sc_poweroffset;
79 return clamped_maxtxpower;
80 }
81
82 @@ -10821,6 +10858,12 @@ ath_ioctl(struct net_device *dev, struct
83 * is to add module parameters.
84 */
85
86 +/* sysctls for hardware info */
87 +enum {
88 + ATH_CARD_VENDOR,
89 + ATH_CARD_NAME,
90 +};
91 +
92 /*
93 * Dynamic (i.e. per-device) sysctls. These are automatically
94 * mirrored in /proc/sys.
95 @@ -10900,6 +10943,38 @@ ath_sysctl_get_intmit(struct ath_softc *
96 }
97
98 static int
99 +ATH_SYSCTL_DECL(ath_sysctl_hwinfo, ctl, write, filp, buffer, lenp, ppos)
100 +{
101 + struct ath_softc *sc = ctl->extra1;
102 + struct ath_hal *ah = sc->sc_ah;
103 + int ret = 0;
104 +
105 + if (write)
106 + return -EINVAL;
107 +
108 + ATH_LOCK(sc);
109 + switch((long)ctl->extra2) {
110 + case ATH_CARD_VENDOR:
111 + ctl->data = (char *)sc->sc_hwinfo->vendor_name;
112 + break;
113 + case ATH_CARD_NAME:
114 + ctl->data = (char *)sc->sc_hwinfo->card_name;
115 + break;
116 + default:
117 + ret = -EINVAL;
118 + break;
119 + }
120 + if (ret == 0) {
121 + ctl->maxlen = strlen(ctl->data);
122 + ret = ATH_SYSCTL_PROC_DOSTRING(ctl, write, filp,
123 + buffer, lenp, ppos);
124 + }
125 + ATH_UNLOCK(sc);
126 +
127 + return ret;
128 +}
129 +
130 +static int
131 ATH_SYSCTL_DECL(ath_sysctl_halparam, ctl, write, filp, buffer, lenp, ppos)
132 {
133 struct ath_softc *sc = ctl->extra1;
134 @@ -11179,6 +11254,24 @@ static int maxint = 0x7fffffff; /* 32-b
135
136 static const ctl_table ath_sysctl_template[] = {
137 { .ctl_name = CTL_AUTO,
138 + .procname = "dev_vendor",
139 + .mode = 0644,
140 + .proc_handler = ath_sysctl_hwinfo,
141 + .strategy = &sysctl_string,
142 + .data = "N/A",
143 + .maxlen = 1,
144 + .extra2 = (void *)ATH_CARD_VENDOR,
145 + },
146 + { .ctl_name = CTL_AUTO,
147 + .procname = "dev_name",
148 + .mode = 0644,
149 + .proc_handler = ath_sysctl_hwinfo,
150 + .strategy = &sysctl_string,
151 + .data = "N/A",
152 + .maxlen = 1,
153 + .extra2 = (void *)ATH_CARD_NAME,
154 + },
155 + { .ctl_name = CTL_AUTO,
156 .procname = "slottime",
157 .mode = 0644,
158 .proc_handler = ath_sysctl_halparam,
159 --- a/ath/if_athvar.h
160 +++ b/ath/if_athvar.h
161 @@ -168,12 +168,16 @@ static inline struct net_device *_alloc_
162 void __user *buffer, size_t *lenp)
163 #define ATH_SYSCTL_PROC_DOINTVEC(ctl, write, filp, buffer, lenp, ppos) \
164 proc_dointvec(ctl, write, filp, buffer, lenp)
165 +#define ATH_SYSCTL_PROC_DOSTRING(ctl, write, filp, buffer, lenp, ppos) \
166 + proc_dostring(ctl, write, filp, buffer, lenp)
167 #else /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,8) */
168 #define ATH_SYSCTL_DECL(f, ctl, write, filp, buffer, lenp, ppos) \
169 f(ctl_table *ctl, int write, struct file *filp, \
170 void __user *buffer, size_t *lenp, loff_t *ppos)
171 #define ATH_SYSCTL_PROC_DOINTVEC(ctl, write, filp, buffer, lenp, ppos) \
172 proc_dointvec(ctl, write, filp, buffer, lenp, ppos)
173 +#define ATH_SYSCTL_PROC_DOSTRING(ctl, write, filp, buffer, lenp, ppos) \
174 + proc_dostring(ctl, write, filp, buffer, lenp, ppos)
175 #endif
176
177 #define ATH_TIMEOUT 1000
178 @@ -469,6 +473,7 @@ struct ath_hal;
179 struct ath_desc;
180 struct ath_ratectrl;
181 struct ath_tx99;
182 +struct ath_hw_detect;
183 struct proc_dir_entry;
184
185 /*
186 @@ -629,6 +634,7 @@ struct ath_softc {
187 struct ath_ratectrl *sc_rc; /* tx rate control support */
188 struct ath_tx99 *sc_tx99; /* tx99 support */
189 void (*sc_setdefantenna)(struct ath_softc *, u_int);
190 + const struct ath_hw_detect *sc_hwinfo;
191
192 unsigned int sc_invalid:1; /* being detached */
193 unsigned int sc_mrretry:1; /* multi-rate retry support */
194 @@ -683,6 +689,7 @@ struct ath_softc {
195 const HAL_RATE_TABLE *sc_quarter_rates; /* quarter rate table */
196 HAL_OPMODE sc_opmode; /* current hal operating mode */
197 enum ieee80211_phymode sc_curmode; /* current phy mode */
198 + u_int sc_poweroffset; /* hardware power offset */
199 u_int16_t sc_curtxpow; /* current tx power limit */
200 u_int16_t sc_curaid; /* current association id */
201 HAL_CHANNEL sc_curchan; /* current h/w channel */
202 @@ -929,4 +936,16 @@ int ar_device(int devid);
203
204 void ath_radar_detected(struct ath_softc *sc, const char* message);
205
206 +struct ath_hw_detect {
207 + const char *vendor_name;
208 + const char *card_name;
209 + u32 vendor;
210 + u32 id;
211 + u32 subvendor;
212 + u32 subid;
213 + u32 poweroffset;
214 +};
215 +
216 +extern void ath_hw_detect(struct ath_softc *sc, const struct ath_hw_detect *cards, int n_cards, u32 vendor, u32 id, u32 subvendor, u32 subid);
217 +
218 #endif /* _DEV_ATH_ATHVAR_H */
219 --- a/ath/if_ath_ahb.c
220 +++ b/ath/if_ath_ahb.c
221 @@ -20,6 +20,7 @@
222 #include <linux/netdevice.h>
223 #include <linux/cache.h>
224 #include <linux/platform_device.h>
225 +#include <linux/pci.h>
226
227 #include <asm/io.h>
228 #include <asm/uaccess.h>
229 @@ -181,12 +182,32 @@ exit_ath_wmac(u_int16_t wlanNum, struct
230 return 0;
231 }
232
233 +static const char ubnt[] = "Ubiquiti Networks";
234 +/* { vendorname, cardname, vendorid, cardid, subsys vendorid, subsys id, poweroffset } */
235 +static const struct ath_hw_detect cards[] = {
236 + { ubnt, "PowerStation2 (18V)", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xb102 },
237 + { ubnt, "PowerStation2 (16D)", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xb202 },
238 + { ubnt, "PowerStation2 (EXT)", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xb302 },
239 + { ubnt, "PowerStation5 (22V)", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xb105 },
240 + { ubnt, "PowerStation5 (EXT)", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xb305 },
241 + { ubnt, "WispStation5", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xa105 },
242 + { ubnt, "LiteStation2", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xa002 },
243 + { ubnt, "LiteStation5", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xa005 },
244 + { ubnt, "NanoStation2", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xc002 },
245 + { ubnt, "NanoStation5", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xc005 },
246 + { ubnt, "NanoStation Loco2", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xc102 },
247 + { ubnt, "NanoStation Loco5", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xc105 },
248 + { ubnt, "Bullet2", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xc202 },
249 + { ubnt, "Bullet5", PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0xc205 },
250 +};
251 +
252 static int
253 init_ath_wmac(u_int16_t devid, u_int16_t wlanNum, struct ar531x_config *config)
254 {
255 const char *athname;
256 struct net_device *dev;
257 struct ath_ahb_softc *sc;
258 + u16 *radio_data;
259
260 if (((wlanNum != 0) && (wlanNum != 1)) ||
261 (sclist[wlanNum] != NULL))
262 @@ -248,6 +269,16 @@ init_ath_wmac(u_int16_t devid, u_int16_t
263 sc->aps_sc.sc_softled = 1; /* SoftLED over GPIO */
264 sc->aps_sc.sc_ledpin = config->board->sysLedGpio;
265 sc->aps_sc.sc_invalid = 0;
266 + radio_data = (u16 *) config->radio;
267 + if (radio_data) {
268 + u16 vendor, id, subvendor, subid;
269 + vendor = radio_data[1];
270 + id = radio_data[0];
271 + subvendor = radio_data[8];
272 + subid = radio_data[7];
273 + ath_hw_detect(&sc->aps_sc, cards, ARRAY_SIZE(cards), vendor, id, subvendor, subid);
274 + }
275 +
276 return 0;
277
278 bad4:
279 --- a/ath/if_ath_pci.c
280 +++ b/ath/if_ath_pci.c
281 @@ -123,6 +123,33 @@ static u16 ath_devidmap[][2] = {
282 { 0xff1a, 0x001a }
283 };
284
285 +static const char ubnt[] = "Ubiquiti Networks";
286 +/* { vendorname, cardname, vendorid, cardid, subsys vendorid, subsys id, poweroffset } */
287 +static const struct ath_hw_detect cards[] = {
288 + { ubnt, "XR2", 0x168c, 0x001b, 0x0777, 0x3002, 10 },
289 + { ubnt, "XR2", 0x168c, 0x001b, 0x7777, 0x3002, 10 },
290 + { ubnt, "XR2.3", 0x168c, 0x001b, 0x0777, 0x3b02, 10 },
291 + { ubnt, "XR2.6", 0x168c, 0x001b, 0x0777, 0x3c02, 10 },
292 + { ubnt, "XR3-2.8", 0x168c, 0x001b, 0x0777, 0x3b03, 10 },
293 + { ubnt, "XR3-3.6", 0x168c, 0x001b, 0x0777, 0x3c03, 10 },
294 + { ubnt, "XR3", 0x168c, 0x001b, 0x0777, 0x3003, 10 },
295 + { ubnt, "XR4", 0x168c, 0x001b, 0x0777, 0x3004, 10 },
296 + { ubnt, "XR5", 0x168c, 0x001b, 0x0777, 0x3005, 10 },
297 + { ubnt, "XR5", 0x168c, 0x001b, 0x7777, 0x3005, 10 },
298 + { ubnt, "XR7", 0x168c, 0x001b, 0x0777, 0x3007, 10 },
299 + { ubnt, "XR9", 0x168c, 0x001b, 0x0777, 0x3009, 10 },
300 + { ubnt, "SRC", 0x168c, 0x0013, 0x168c, 0x1042, 1 },
301 + { ubnt, "SR2", 0x168c, 0x0013, 0x0777, 0x2041, 10 },
302 + { ubnt, "SR4", 0x168c, 0x0013, 0x0777, 0x2004, 6 },
303 + { ubnt, "SR4", 0x168c, 0x0013, 0x7777, 0x2004, 6 },
304 + { ubnt, "SR4C", 0x168c, 0x0013, 0x0777, 0x1004, 6 },
305 + { ubnt, "SR4C", 0x168c, 0x0013, 0x7777, 0x1004, 6 },
306 + { ubnt, "SR5", 0x168c, 0x0013, 0x168c, 0x2042, 7 },
307 + { ubnt, "SR9", 0x168c, 0x0013, 0x7777, 0x2009, 12 },
308 + { ubnt, "SR71A", 0x168c, 0x0027, 0x168c, 0x2082, 10 },
309 + { ubnt, "SR71", 0x168c, 0x0027, 0x0777, 0x4082, 10 },
310 +};
311 +
312 static int
313 ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
314 {
315 @@ -257,6 +284,10 @@ ath_pci_probe(struct pci_dev *pdev, cons
316 printk(KERN_INFO "%s: %s: %s: mem=0x%lx, irq=%d\n",
317 dev_info, dev->name, athname ? athname : "Atheros ???", phymem, dev->irq);
318
319 + ath_hw_detect(&sc->aps_sc, cards, ARRAY_SIZE(cards),
320 + pdev->vendor, pdev->device,
321 + pdev->subsystem_vendor, pdev->subsystem_device);
322 +
323 /* ready to process interrupts */
324 sc->aps_sc.sc_invalid = 0;
325
This page took 0.06051 seconds and 5 git commands to generate.