target/linux/ppc40x/patches-2.6.30/005-openrb.patch

   1 --- /dev/null
   2 +++ b/arch/powerpc/boot/cuboot-openrb.c
   3 @@ -0,0 +1,71 @@
   4 +/*
   5 + * Old U-boot compatibility for OpenRB boards
   6 + *
   7 + * Author: Gabor Juhos <juhosg@openwrt.org>
   8 + *         Imre Kaloz <kaloz@openwrt.org>
   9 + *
  10 + * This program is free software; you can redistribute it and/or modify it
  11 + * under the terms of the GNU General Public License version 2 as published
  12 + * by the Free Software Foundation.
  13 + */
  14 +
  15 +#include "ops.h"
  16 +#include "io.h"
  17 +#include "dcr.h"
  18 +#include "stdio.h"
  19 +#include "4xx.h"
  20 +#include "44x.h"
  21 +#include "cuboot.h"
  22 +
  23 +#define TARGET_4xx
  24 +#define TARGET_405EP
  25 +#include "ppcboot.h"
  26 +
  27 +static bd_t bd;
  28 +
  29 +static void fixup_cf_card(void)
  30 +{
  31 +#define DCRN_CPC0_PCI_BASE     0xf9
  32 +#define CF_CS0_BASE            0xff100000
  33 +#define CF_CS1_BASE            0xff200000
  34 +
  35 +       /* Turn on PerWE instead of PCIsomething */
  36 +       mtdcr(DCRN_CPC0_PCI_BASE,
  37 +             mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
  38 +
  39 +       /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
  40 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR);
  41 +       mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
  42 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP);
  43 +       mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
  44 +
  45 +       /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
  46 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR);
  47 +       mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
  48 +       mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP);
  49 +       mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
  50 +
  51 +#undef DCRN_CPC0_PCI_BASE
  52 +#undef CF_CS0_BASE
  53 +#undef CF_CS1_BASE
  54 +}
  55 +
  56 +static void openrb_fixups(void)
  57 +{
  58 +       ibm405ep_fixup_clocks(bd.bi_procfreq / 8);
  59 +       ibm4xx_sdram_fixup_memsize();
  60 +
  61 +       fixup_cf_card();
  62 +
  63 +       dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
  64 +}
  65 +
  66 +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
  67 +               unsigned long r6, unsigned long r7)
  68 +{
  69 +       CUBOOT_INIT();
  70 +       platform_ops.fixups = openrb_fixups;
  71 +       platform_ops.exit = ibm40x_dbcr_reset;
  72 +       fdt_init(_dtb_start);
  73 +       serial_console_init();
  74 +}
  75 --- /dev/null
  76 +++ b/arch/powerpc/boot/dts/openrb.dts
  77 @@ -0,0 +1,276 @@
  78 +/*
  79 + * Device Tree Source for OpenRB boards
  80 + *
  81 + * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
  82 + * Copyright 2009 Imre Kaloz <kaloz@openwrt.org>
  83 + *
  84 + * Based on walnut.dts
  85 + *
  86 + * This file is licensed under the terms of the GNU General Public
  87 + * License version 2.  This program is licensed "as is" without
  88 + * any warranty of any kind, whether express or implied.
  89 + */
  90 +
  91 +/dts-v1/;
  92 +
  93 +/ {
  94 +       #address-cells = <1>;
  95 +       #size-cells = <1>;
  96 +       model = "openrb";
  97 +       compatible = "openrb";
  98 +       dcr-parent = <&{/cpus/cpu@0}>;
  99 +
 100 +       aliases {
 101 +               ethernet0 = &EMAC0;
 102 +               ethernet1 = &EMAC1;
 103 +               serial0 = &UART0;
 104 +               serial1 = &UART1;
 105 +       };
 106 +
 107 +       cpus {
 108 +               #address-cells = <1>;
 109 +               #size-cells = <0>;
 110 +
 111 +               cpu@0 {
 112 +                       device_type = "cpu";
 113 +                       model = "PowerPC,405EP";
 114 +                       reg = <0x00000000>;
 115 +                       clock-frequency = <0>; /* Filled in by zImage */
 116 +                       timebase-frequency = <0>; /* Filled in by zImage */
 117 +                       i-cache-line-size = <0x20>;
 118 +                       d-cache-line-size = <0x20>;
 119 +                       i-cache-size = <0x4000>;
 120 +                       d-cache-size = <0x4000>;
 121 +                       dcr-controller;
 122 +                       dcr-access-method = "native";
 123 +               };
 124 +       };
 125 +
 126 +       memory {
 127 +               device_type = "memory";
 128 +               reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 129 +       };
 130 +
 131 +       UIC0: interrupt-controller {
 132 +               compatible = "ibm,uic";
 133 +               interrupt-controller;
 134 +               cell-index = <0>;
 135 +               dcr-reg = <0x0c0 0x009>;
 136 +               #address-cells = <0>;
 137 +               #size-cells = <0>;
 138 +               #interrupt-cells = <2>;
 139 +       };
 140 +
 141 +       plb {
 142 +               compatible = "ibm,plb3";
 143 +               #address-cells = <1>;
 144 +               #size-cells = <1>;
 145 +               ranges;
 146 +               clock-frequency = <0>; /* Filled in by zImage */
 147 +
 148 +               SDRAM0: memory-controller {
 149 +                       compatible = "ibm,sdram-405ep";
 150 +                       dcr-reg = <0x010 0x002>;
 151 +               };
 152 +
 153 +               MAL: mcmal {
 154 +                       compatible = "ibm,mcmal-405ep", "ibm,mcmal";
 155 +                       dcr-reg = <0x180 0x062>;
 156 +                       num-tx-chans = <4>;
 157 +                       num-rx-chans = <2>;
 158 +                       interrupt-parent = <&UIC0>;
 159 +                       interrupts = <
 160 +                               0xb 0x4 /* TXEOB */
 161 +                               0xc 0x4 /* RXEOB */
 162 +                               0xa 0x4 /* SERR */
 163 +                               0xd 0x4 /* TXDE */
 164 +                               0xe 0x4 /* RXDE */>;
 165 +               };
 166 +
 167 +               POB0: opb {
 168 +                       compatible = "ibm,opb-405ep", "ibm,opb";
 169 +                       #address-cells = <1>;
 170 +                       #size-cells = <1>;
 171 +                       ranges = <0xef600000 0xef600000 0x00a00000>;
 172 +                       dcr-reg = <0x0a0 0x005>;
 173 +                       clock-frequency = <0>; /* Filled in by zImage */
 174 +
 175 +                       UART0: serial@ef600300 {
 176 +                               device_type = "serial";
 177 +                               compatible = "ns16550";
 178 +                               reg = <0xef600300 0x00000008>;
 179 +                               virtual-reg = <0xef600300>;
 180 +                               clock-frequency = <0>; /* Filled in by zImage */
 181 +                               current-speed = <115200>;
 182 +                               interrupt-parent = <&UIC0>;
 183 +                               interrupts = <0x0 0x4>;
 184 +                       };
 185 +
 186 +                       UART1: serial@ef600400 {
 187 +                               device_type = "serial";
 188 +                               compatible = "ns16550";
 189 +                               reg = <0xef600400 0x00000008>;
 190 +                               virtual-reg = <0xef600400>;
 191 +                               clock-frequency = <0>; /* Filled in by zImage */
 192 +                               current-speed = <115200>;
 193 +                               interrupt-parent = <&UIC0>;
 194 +                               interrupts = <0x1 0x4>;
 195 +                       };
 196 +
 197 +                       IIC: i2c@ef600500 {
 198 +                               compatible = "ibm,iic-405ep", "ibm,iic";
 199 +                               #address-cells = <1>;
 200 +                               #size-cells = <0>;
 201 +                               reg = <0xef600500 0x00000011>;
 202 +                               interrupt-parent = <&UIC0>;
 203 +                               interrupts = <0x2 0x4>;
 204 +
 205 +                               eeprom@50 {
 206 +                                       compatible = "at24,24c16";
 207 +                                       reg = <0x50>;
 208 +                               };
 209 +                       };
 210 +
 211 +                       GPIO0: gpio-controller@ef600700 {
 212 +                               compatible = "ibm,ppc4xx-gpio";
 213 +                               reg = <0xef600700 0x00000020>;
 214 +                               #gpio-cells = <2>;
 215 +                               gpio-controller;
 216 +                       };
 217 +
 218 +                       EMAC0: ethernet@ef600800 {
 219 +                               linux,network-index = <0x0>;
 220 +                               device_type = "network";
 221 +                               compatible = "ibm,emac-405ep", "ibm,emac";
 222 +                               interrupt-parent = <&UIC0>;
 223 +                               interrupts = <
 224 +                                       0xf 0x4 /* Ethernet */
 225 +                                       0x9 0x4 /* Ethernet Wake Up */>;
 226 +                               local-mac-address = [000000000000]; /* Filled in by zImage */
 227 +                               reg = <0xef600800 0x00000070>;
 228 +                               mal-device = <&MAL>;
 229 +                               mal-tx-channel = <0>;
 230 +                               mal-rx-channel = <0>;
 231 +                               cell-index = <0>;
 232 +                               max-frame-size = <0x5dc>;
 233 +                               rx-fifo-size = <0x1000>;
 234 +                               tx-fifo-size = <0x800>;
 235 +                               phy-mode = "mii";
 236 +                               phy-map = <0x00000000>;
 237 +                       };
 238 +
 239 +                       EMAC1: ethernet@ef600900 {
 240 +                               linux,network-index = <0x1>;
 241 +                               device_type = "network";
 242 +                               compatible = "ibm,emac-405ep", "ibm,emac";
 243 +                               interrupt-parent = <&UIC0>;
 244 +                               interrupts = <
 245 +                                       0x11 0x4 /* Ethernet */
 246 +                                       0x09 0x4 /* Ethernet Wake Up */>;
 247 +                               local-mac-address = [000000000000]; /* Filled in by zImage */
 248 +                               reg = <0xef600900 0x00000070>;
 249 +                               mal-device = <&MAL>;
 250 +                               mal-tx-channel = <2>;
 251 +                               mal-rx-channel = <1>;
 252 +                               cell-index = <1>;
 253 +                               max-frame-size = <0x5dc>;
 254 +                               rx-fifo-size = <0x1000>;
 255 +                               tx-fifo-size = <0x800>;
 256 +                               mdio-device = <&EMAC0>;
 257 +                               phy-mode = "mii";
 258 +                               phy-map = <0x00000001>;
 259 +                       };
 260 +
 261 +                       leds {
 262 +                               compatible = "gpio-leds";
 263 +                               user {
 264 +                                       label = "openrb:green:user";
 265 +                                       gpios = <&GPIO0 2 1>;
 266 +                               };
 267 +                       };
 268 +               };
 269 +
 270 +               EBC0: ebc {
 271 +                       compatible = "ibm,ebc-405ep", "ibm,ebc";
 272 +                       dcr-reg = <0x012 0x002>;
 273 +                       #address-cells = <2>;
 274 +                       #size-cells = <1>;
 275 +                       /* The ranges property is supplied by the bootwrapper
 276 +                        * and is based on the firmware's configuration of the
 277 +                        * EBC bridge
 278 +                        */
 279 +                       clock-frequency = <0>; /* Filled in by zImage */
 280 +
 281 +                       cf_card@ff100000 {
 282 +                               compatible = "magicbox-cf", "pata-magicbox-cf";
 283 +                               reg = <0x00000000 0xff100000 0x00001000
 284 +                                      0x00000000 0xff200000 0x00001000>;
 285 +                               interrupt-parent = <&UIC0>;
 286 +                               interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >;
 287 +                       };
 288 +
 289 +                       nor_flash@ff800000 {
 290 +                               compatible = "cfi-flash";
 291 +                               bank-width = <2>;
 292 +                               reg = <0x00000000 0xff800000 0x00800000>;
 293 +                               #address-cells = <1>;
 294 +                               #size-cells = <1>;
 295 +                               partition@0 {
 296 +                                       label = "linux";
 297 +                                       reg = <0x0 0x120000>;
 298 +                               };
 299 +                               partition@120000 {
 300 +                                       label = "rootfs";
 301 +                                       reg = <0x120000 0x6a0000>;
 302 +                               };
 303 +                               partition@7c0000 {
 304 +                                       label = "u-boot";
 305 +                                       reg = <0x7c0000 0x30000>;
 306 +                                       read-only;
 307 +                               };
 308 +                       };
 309 +               };
 310 +
 311 +               PCI0: pci@ec000000 {
 312 +                       device_type = "pci";
 313 +                       #interrupt-cells = <1>;
 314 +                       #size-cells = <2>;
 315 +                       #address-cells = <3>;
 316 +                       compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
 317 +                       primary;
 318 +                       reg = <0xeec00000 0x00000008    /* Config space access */
 319 +                              0xeed80000 0x00000004    /* IACK */
 320 +                              0xeed80000 0x00000004    /* Special cycle */
 321 +                              0xef480000 0x00000040>;  /* Internal registers */
 322 +
 323 +                       /* Outbound ranges, one memory and one IO,
 324 +                        * later cannot be changed. Chip supports a second
 325 +                        * IO range but we don't use it for now
 326 +                        */
 327 +                       ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
 328 +                                 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 329 +
 330 +                       /* Inbound 2GB range starting at 0 */
 331 +                       dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 332 +
 333 +                       interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 334 +                       interrupt-map = <
 335 +                               /* IDSEL 1 */
 336 +                               0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 337 +
 338 +                               /* IDSEL 2 */
 339 +                               0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
 340 +
 341 +                               /* IDSEL 3 */
 342 +                               0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
 343 +
 344 +                               /* IDSEL 4 */
 345 +                               0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
 346 +                       >;
 347 +               };
 348 +       };
 349 +
 350 +       chosen {
 351 +               linux,stdout-path = "/plb/opb/serial@ef600300";
 352 +       };
 353 +};
 354 --- a/arch/powerpc/boot/Makefile
 355 +++ b/arch/powerpc/boot/Makefile
 356 @@ -43,6 +43,7 @@ $(obj)/cuboot-taishan.o: BOOTCFLAGS += -
 357  $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
 358  $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
 359  $(obj)/cuboot-magicbox.o: BOOTCFLAGS += -mcpu=405
 360 +$(obj)/cuboot-openrb.o: BOOTCFLAGS += -mcpu=405
 361  $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
 362  $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
 363
 364 @@ -76,7 +77,8 @@ src-plat := of.c cuboot-52xx.c cuboot-82
 365                 cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 366                 cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 367                 virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
 368 -               cuboot-acadia.c cuboot-amigaone.c cuboot-magicbox.c
 369 +               cuboot-acadia.c cuboot-amigaone.c cuboot-magicbox.c \
 370 +               cuboot-openrb.c
 371  src-boot := $(src-wlib) $(src-plat) empty.c
 372
 373  src-boot := $(addprefix $(obj)/, $(src-boot))
 374 @@ -194,6 +196,7 @@ image-$(CONFIG_EP405)                       += dtbImage.ep40
 375  image-$(CONFIG_WALNUT)                 += treeImage.walnut
 376  image-$(CONFIG_ACADIA)                 += cuImage.acadia
 377  image-$(CONFIG_MAGICBOX)               += cuImage.magicbox
 378 +image-$(CONFIG_OPENRB)                 += cuImage.openrb
 379
 380  # Board ports in arch/powerpc/platform/44x/Kconfig
 381  image-$(CONFIG_EBONY)                  += treeImage.ebony cuImage.ebony
 382 --- a/arch/powerpc/platforms/40x/Kconfig
 383 +++ b/arch/powerpc/platforms/40x/Kconfig
 384 @@ -60,6 +60,16 @@ config MAGICBOX
 385         help
 386           This option enables support for the Magicbox boards.
 387
 388 +config OPENRB
 389 +       bool "OpenRB"
 390 +       depends on 40x
 391 +       default n
 392 +       select PPC40x_SIMPLE
 393 +       select 405EP
 394 +       select PCI
 395 +       help
 396 +         This option enables support for the OpenRB boards.
 397 +
 398  config MAKALU
 399         bool "Makalu"
 400         depends on 40x
 401 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c
 402 +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
 403 @@ -55,7 +55,8 @@ static char *board[] __initdata = {
 404         "amcc,haleakala",
 405         "amcc,kilauea",
 406         "amcc,makalu",
 407 -       "magicbox"
 408 +       "magicbox",
 409 +       "openrb"
 410  };
 411
 412  static int __init ppc40x_probe(void)