package/uboot-ifxmips/files/cpu/mips/danube/au1x00_eth.c

   1 /* Only eth0 supported for now
   2  *
   3  * (C) Copyright 2003
   4  * Thomas.Lange@corelatus.se
   5  *
   6  * See file CREDITS for list of people who contributed to this
   7  * project.
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24 #include <config.h>
  25
  26 #ifdef CONFIG_AU1X00
  27
  28 #if defined(CFG_DISCOVER_PHY)
  29 #error "PHY not supported yet"
  30 /* We just assume that we are running 100FD for now */
  31 /* We all use switches, right? ;-) */
  32 #endif
  33
  34 /* I assume ethernet behaves like au1000 */
  35
  36 #ifdef CONFIG_AU1000
  37 /* Base address differ between cpu:s */
  38 #define ETH0_BASE AU1000_ETH0_BASE
  39 #define MAC0_ENABLE AU1000_MAC0_ENABLE
  40 #else
  41 #ifdef CONFIG_AU1100
  42 #define ETH0_BASE AU1100_ETH0_BASE
  43 #define MAC0_ENABLE AU1100_MAC0_ENABLE
  44 #else
  45 #ifdef CONFIG_AU1500
  46 #define ETH0_BASE AU1500_ETH0_BASE
  47 #define MAC0_ENABLE AU1500_MAC0_ENABLE
  48 #else
  49 #ifdef CONFIG_AU1550
  50 #define ETH0_BASE AU1550_ETH0_BASE
  51 #define MAC0_ENABLE AU1550_MAC0_ENABLE
  52 #else
  53 #error "No valid cpu set"
  54 #endif
  55 #endif
  56 #endif
  57 #endif
  58
  59 #include <common.h>
  60 #include <malloc.h>
  61 #include <net.h>
  62 #include <command.h>
  63 #include <asm/io.h>
  64 #include <asm/au1x00.h>
  65
  66 #if (CONFIG_COMMANDS & CFG_CMD_MII)
  67 #include <miiphy.h>
  68 #endif
  69
  70 /* Ethernet Transmit and Receive Buffers */
  71 #define DBUF_LENGTH  1520
  72 #define PKT_MAXBUF_SIZE         1518
  73
  74 static char txbuf[DBUF_LENGTH];
  75
  76 static int next_tx;
  77 static int next_rx;
  78
  79 /* 4 rx and 4 tx fifos */
  80 #define NO_OF_FIFOS 4
  81
  82 typedef struct{
  83         u32 status;
  84         u32 addr;
  85         u32 len; /* Only used for tx */
  86         u32 not_used;
  87 } mac_fifo_t;
  88
  89 mac_fifo_t mac_fifo[NO_OF_FIFOS];
  90
  91 #define MAX_WAIT 1000
  92
  93 static int au1x00_send(struct eth_device* dev, volatile void *packet, int length){
  94         volatile mac_fifo_t *fifo_tx =
  95                 (volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
  96         int i;
  97         int res;
  98
  99         /* tx fifo should always be idle */
 100         fifo_tx[next_tx].len = length;
 101         fifo_tx[next_tx].addr = (virt_to_phys(packet))|TX_DMA_ENABLE;
 102         au_sync();
 103
 104         udelay(1);
 105         i=0;
 106         while(!(fifo_tx[next_tx].addr&TX_T_DONE)){
 107                 if(i>MAX_WAIT){
 108                         printf("TX timeout\n");
 109                         break;
 110                 }
 111                 udelay(1);
 112                 i++;
 113         }
 114
 115         /* Clear done bit */
 116         fifo_tx[next_tx].addr = 0;
 117         fifo_tx[next_tx].len = 0;
 118         au_sync();
 119
 120         res = fifo_tx[next_tx].status;
 121
 122         next_tx++;
 123         if(next_tx>=NO_OF_FIFOS){
 124                 next_tx=0;
 125         }
 126         return(res);
 127 }
 128
 129 static int au1x00_recv(struct eth_device* dev){
 130         volatile mac_fifo_t *fifo_rx =
 131                 (volatile mac_fifo_t*)(MAC0_RX_DMA_ADDR+MAC_RX_BUFF0_STATUS);
 132
 133         int length;
 134         u32 status;
 135
 136         for(;;){
 137                 if(!(fifo_rx[next_rx].addr&RX_T_DONE)){
 138                         /* Nothing has been received */
 139                         return(-1);
 140                 }
 141
 142                 status = fifo_rx[next_rx].status;
 143
 144                 length = status&0x3FFF;
 145
 146                 if(status&RX_ERROR){
 147                         printf("Rx error 0x%x\n", status);
 148                 }
 149                 else{
 150                         /* Pass the packet up to the protocol layers. */
 151                         NetReceive(NetRxPackets[next_rx], length - 4);
 152                 }
 153
 154                 fifo_rx[next_rx].addr = (virt_to_phys(NetRxPackets[next_rx]))|RX_DMA_ENABLE;
 155
 156                 next_rx++;
 157                 if(next_rx>=NO_OF_FIFOS){
 158                         next_rx=0;
 159                 }
 160         } /* for */
 161
 162         return(0); /* Does anyone use this? */
 163 }
 164
 165 static int au1x00_init(struct eth_device* dev, bd_t * bd){
 166
 167         volatile u32 *macen = (volatile u32*)MAC0_ENABLE;
 168         volatile u32 *mac_ctrl = (volatile u32*)(ETH0_BASE+MAC_CONTROL);
 169         volatile u32 *mac_addr_high = (volatile u32*)(ETH0_BASE+MAC_ADDRESS_HIGH);
 170         volatile u32 *mac_addr_low = (volatile u32*)(ETH0_BASE+MAC_ADDRESS_LOW);
 171         volatile u32 *mac_mcast_high = (volatile u32*)(ETH0_BASE+MAC_MCAST_HIGH);
 172         volatile u32 *mac_mcast_low = (volatile u32*)(ETH0_BASE+MAC_MCAST_LOW);
 173         volatile mac_fifo_t *fifo_tx =
 174                 (volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
 175         volatile mac_fifo_t *fifo_rx =
 176                 (volatile mac_fifo_t*)(MAC0_RX_DMA_ADDR+MAC_RX_BUFF0_STATUS);
 177         int i;
 178
 179         next_tx = TX_GET_DMA_BUFFER(fifo_tx[0].addr);
 180         next_rx = RX_GET_DMA_BUFFER(fifo_rx[0].addr);
 181
 182         /* We have to enable clocks before releasing reset */
 183         *macen = MAC_EN_CLOCK_ENABLE;
 184         udelay(10);
 185
 186         /* Enable MAC0 */
 187         /* We have to release reset before accessing registers */
 188         *macen = MAC_EN_CLOCK_ENABLE|MAC_EN_RESET0|
 189                 MAC_EN_RESET1|MAC_EN_RESET2;
 190         udelay(10);
 191
 192         for(i=0;i<NO_OF_FIFOS;i++){
 193                 fifo_tx[i].len = 0;
 194                 fifo_tx[i].addr = virt_to_phys(&txbuf[0]);
 195                 fifo_rx[i].addr = (virt_to_phys(NetRxPackets[i]))|RX_DMA_ENABLE;
 196         }
 197
 198         /* Put mac addr in little endian */
 199 #define ea eth_get_dev()->enetaddr
 200         *mac_addr_high  =       (ea[5] <<  8) | (ea[4]      ) ;
 201         *mac_addr_low   =       (ea[3] << 24) | (ea[2] << 16) |
 202                 (ea[1] <<  8) | (ea[0]      ) ;
 203 #undef ea
 204         *mac_mcast_low = 0;
 205         *mac_mcast_high = 0;
 206
 207         /* Make sure the MAC buffer is in the correct endian mode */
 208 #ifdef __LITTLE_ENDIAN
 209         *mac_ctrl = MAC_FULL_DUPLEX;
 210         udelay(1);
 211         *mac_ctrl = MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
 212 #else
 213         *mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX;
 214         udelay(1);
 215         *mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
 216 #endif
 217
 218         return(1);
 219 }
 220
 221 static void au1x00_halt(struct eth_device* dev){
 222 }
 223
 224 int au1x00_enet_initialize(bd_t *bis){
 225         struct eth_device* dev;
 226
 227         if ((dev = (struct eth_device*)malloc(sizeof *dev)) == NULL) {
 228                 puts ("malloc failed\n");
 229                 return 0;
 230         }
 231
 232         memset(dev, 0, sizeof *dev);
 233
 234         sprintf(dev->name, "Au1X00 ethernet");
 235         dev->iobase = 0;
 236         dev->priv   = 0;
 237         dev->init   = au1x00_init;
 238         dev->halt   = au1x00_halt;
 239         dev->send   = au1x00_send;
 240         dev->recv   = au1x00_recv;
 241
 242         eth_register(dev);
 243
 244 #if (CONFIG_COMMANDS & CFG_CMD_MII)
 245         miiphy_register(dev->name,
 246                 au1x00_miiphy_read, au1x00_miiphy_write);
 247 #endif
 248
 249         return 1;
 250 }
 251
 252 #if (CONFIG_COMMANDS & CFG_CMD_MII)
 253 int  au1x00_miiphy_read(char *devname, unsigned char addr,
 254                 unsigned char reg, unsigned short * value)
 255 {
 256         volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
 257         volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
 258         u32 mii_control;
 259         unsigned int timedout = 20;
 260
 261         while (*mii_control_reg & MAC_MII_BUSY) {
 262                 udelay(1000);
 263                 if (--timedout == 0) {
 264                         printf("au1x00_eth: miiphy_read busy timeout!!\n");
 265                         return -1;
 266                 }
 267         }
 268
 269         mii_control = MAC_SET_MII_SELECT_REG(reg) |
 270                 MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
 271
 272         *mii_control_reg = mii_control;
 273
 274         timedout = 20;
 275         while (*mii_control_reg & MAC_MII_BUSY) {
 276                 udelay(1000);
 277                 if (--timedout == 0) {
 278                         printf("au1x00_eth: miiphy_read busy timeout!!\n");
 279                         return -1;
 280                 }
 281         }
 282         *value = *mii_data_reg;
 283         return 0;
 284 }
 285
 286 int  au1x00_miiphy_write(char *devname, unsigned char addr,
 287                 unsigned char reg, unsigned short value)
 288 {
 289         volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
 290         volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
 291         u32 mii_control;
 292         unsigned int timedout = 20;
 293
 294         while (*mii_control_reg & MAC_MII_BUSY) {
 295                 udelay(1000);
 296                 if (--timedout == 0) {
 297                         printf("au1x00_eth: miiphy_write busy timeout!!\n");
 298                         return;
 299                 }
 300         }
 301
 302         mii_control = MAC_SET_MII_SELECT_REG(reg) |
 303                 MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
 304
 305         *mii_data_reg = value;
 306         *mii_control_reg = mii_control;
 307         return 0;
 308 }
 309 #endif  /* CONFIG_COMMANDS & CFG_CMD_MII */
 310
 311 #endif /* CONFIG_AU1X00 */