tools/firmware-utils/src/myloader.h

   1 /*
   2  *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
   3  *
   4  *  This program is free software; you can redistribute  it and/or modify it
   5  *  under  the terms of  the GNU General  Public License as published by the
   6  *  Free Software Foundation;  either version 2 of the  License, or (at your
   7  *  option) any later version.
   8  *
   9  */
  10
  11 #ifndef _MYLOADER_H_
  12 #define _MYLOADER_H_
  13
  14 /*
  15  * Firmware file format:
  16  *
  17  *      <header>
  18  *      [<block descriptor 0>]
  19  *      ...
  20  *      [<block descriptor n>]
  21  *      <null block descriptor>
  22  *      [<block data 0>]
  23  *      ...
  24  *      [<block data n>]
  25  *
  26  *
  27  */
  28
  29 /* Myloader specific magic numbers */
  30 #define MYLO_MAGIC_FIRMWARE     0x4C594D00
  31 #define MYLO_MAGIC_20021103     0x20021103
  32 #define MYLO_MAGIC_20021107     0x20021107
  33
  34 #define MYLO_MAGIC_SYS_PARAMS   MYLO_MAGIC_20021107
  35 #define MYLO_MAGIC_PARTITIONS   MYLO_MAGIC_20021103
  36 #define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103
  37
  38 /*
  39  * Addresses of the data structures provided by MyLoader
  40  */
  41 #define MYLO_MIPS_SYS_PARAMS    0x80000800      /* System Parameters */
  42 #define MYLO_MIPS_BOARD_PARAMS  0x80000A00      /* Board Parameters */
  43 #define MYLO_MIPS_PARTITIONS    0x80000C00      /* Partition Table */
  44 #define MYLO_MIPS_BOOT_PARAMS   0x80000E00      /* Boot Parameters */
  45
  46 /* Vendor ID's (seems to be same as the PCI vendor ID's) */
  47 #define VENID_COMPEX            0x11F6
  48
  49 /* Devices based on the ADM5120 */
  50 #define DEVID_COMPEX_NP27G      0x0078
  51 #define DEVID_COMPEX_NP28G      0x044C
  52 #define DEVID_COMPEX_NP28GHS    0x044E
  53 #define DEVID_COMPEX_WP54Gv1C   0x0514
  54 #define DEVID_COMPEX_WP54G      0x0515
  55 #define DEVID_COMPEX_WP54AG     0x0546
  56 #define DEVID_COMPEX_WPP54AG    0x0550
  57 #define DEVID_COMPEX_WPP54G     0x0555
  58
  59 /* Devices based on the Atheros AR2317 */
  60 #define DEVID_COMPEX_NP25G      0x05e6
  61 #define DEVID_COMPEX_WPE53G     0x05dc
  62
  63 /* Devices based on the Atheros AR71xx */
  64 #define DEVID_COMPEX_WP543      0x0640
  65 #define DEVID_COMPEX_WPE72      0x0672
  66
  67 /* Devices based on the IXP422 */
  68 #define DEVID_COMPEX_WP18       0x047E
  69 #define DEVID_COMPEX_NP18A      0x0489
  70
  71 /* Other devices */
  72 #define DEVID_COMPEX_NP26G8M    0x03E8
  73 #define DEVID_COMPEX_NP26G16M   0x03E9
  74
  75 struct mylo_fw_header {
  76         uint32_t        magic;  /* must be MYLO_MAGIC_FIRMWARE */
  77         uint32_t        crc;    /* CRC of the whole firmware */
  78         uint32_t        res0;   /* unknown/unused */
  79         uint32_t        res1;   /* unknown/unused */
  80         uint16_t        vid;    /* vendor ID */
  81         uint16_t        did;    /* device ID */
  82         uint16_t        svid;   /* sub vendor ID */
  83         uint16_t        sdid;   /* sub device ID */
  84         uint32_t        rev;    /* device revision */
  85         uint32_t        fwhi;   /* FIXME: firmware version high? */
  86         uint32_t        fwlo;   /* FIXME: firmware version low? */
  87         uint32_t        flags;  /* firmware flags */
  88 };
  89
  90 #define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */
  91 #define FW_FLAG_BOOT_SECTOR_WE  0x02 /* enable of write boot sectors (below 64K) */
  92
  93 struct mylo_fw_blockdesc {
  94         uint32_t        type;   /* block type */
  95         uint32_t        addr;   /* relative address to flash start */
  96         uint32_t        dlen;   /* size of block data in bytes */
  97         uint32_t        blen;   /* total size of block in bytes */
  98 };
  99
 100 #define FW_DESC_TYPE_UNUSED     0
 101 #define FW_DESC_TYPE_USED       1
 102
 103 struct mylo_partition {
 104         uint16_t        flags;  /* partition flags */
 105         uint16_t        type;   /* type of the partition */
 106         uint32_t        addr;   /* relative address of the partition from the
 107                                    flash start */
 108         uint32_t        size;   /* size of the partition in bytes */
 109         uint32_t        param;  /* if this is the active partition, the
 110                                    MyLoader load code to this address */
 111 };
 112
 113 #define PARTITION_FLAG_ACTIVE   0x8000 /* this is the active partition,
 114                                         * MyLoader loads firmware from here */
 115 #define PARTITION_FLAG_ISRAM    0x2000 /* FIXME: this is a RAM partition? */
 116 #define PARTIIION_FLAG_RAMLOAD  0x1000 /* FIXME: load this partition into the RAM? */
 117 #define PARTITION_FLAG_PRELOAD  0x0800 /* the partition data preloaded to RAM
 118                                         * before decompression */
 119 #define PARTITION_FLAG_LZMA     0x0100 /* the partition data compressed with LZMA */
 120 #define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
 121
 122 #define PARTITION_TYPE_FREE     0
 123 #define PARTITION_TYPE_USED     1
 124
 125 #define MYLO_MAX_PARTITIONS     8       /* maximum number of partitions in the
 126                                            partition table */
 127
 128 struct mylo_partition_table {
 129         uint32_t        magic;  /* must be MYLO_MAGIC_PARTITIONS */
 130         uint32_t        res0;   /* unknown/unused */
 131         uint32_t        res1;   /* unknown/unused */
 132         uint32_t        res2;   /* unknown/unused */
 133         struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
 134 };
 135
 136 struct mylo_partition_header {
 137         uint32_t        len;    /* length of the partition data */
 138         uint32_t        crc;    /* CRC value of the partition data */
 139 };
 140
 141 struct mylo_system_params {
 142         uint32_t        magic;  /* must be MYLO_MAGIC_SYS_PARAMS */
 143         uint32_t        res0;
 144         uint32_t        res1;
 145         uint32_t        mylo_ver;
 146         uint16_t        vid;    /* Vendor ID */
 147         uint16_t        did;    /* Device ID */
 148         uint16_t        svid;   /* Sub Vendor ID */
 149         uint16_t        sdid;   /* Sub Device ID */
 150         uint32_t        rev;    /* device revision */
 151         uint32_t        fwhi;
 152         uint32_t        fwlo;
 153         uint32_t        tftp_addr;
 154         uint32_t        prog_start;
 155         uint32_t        flash_size;     /* Size of boot FLASH in bytes */
 156         uint32_t        dram_size;      /* Size of onboard RAM in bytes */
 157 };
 158
 159
 160 struct mylo_eth_addr {
 161         uint8_t mac[6];
 162         uint8_t csum[2];
 163 };
 164
 165 #define MYLO_ETHADDR_COUNT      8       /* maximum number of ethernet address
 166                                            in the board parameters */
 167
 168 struct mylo_board_params {
 169         uint32_t        magic;  /* must be MYLO_MAGIC_BOARD_PARAMS */
 170         uint32_t        res0;
 171         uint32_t        res1;
 172         uint32_t        res2;
 173         struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
 174 };
 175
 176 #endif /* _MYLOADER_H_*/