target/linux/ramips/base-files/etc/uci-defaults/network

   1 #!/bin/sh
   2
   3 . /etc/functions.sh
   4 . /lib/ramips.sh
   5 . /lib/functions/uci-defaults.sh
   6
   7 if [ ! -x /usr/sbin/maccalc ]; then
   8         echo "$0: maccalc not found!"
   9         return
  10 fi
  11
  12 ramips_setup_interfaces()
  13 {
  14         local board="$1"
  15
  16         ucidef_set_interface_loopback
  17
  18         case $board in
  19         argus-atp52b | \
  20         b2c | \
  21         nw718 | \
  22         w502u)
  23                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  24                 ;;
  25
  26         f5d8235-v1 | \
  27         rt-n15)
  28                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  29                 ucidef_add_switch "rtl8366s" "1" "1"
  30                 ucidef_add_switch_vlan "rtl8366s" "1" "1 2 3 4 5t"
  31                 ucidef_add_switch_vlan "rtl8366s" "2" "0 5t"
  32                 ;;
  33
  34         f5d8235-v2 | \
  35         wl-351)
  36                 ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  37                 ucidef_add_switch "rtl8366rb" "1" "1"
  38                 ucidef_add_switch_vlan "rtl8366rb" "1" "0 1 2 3 5t"
  39                 ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
  40                 ;;
  41
  42         wcr-150gn)
  43                 ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
  44                 ;;
  45
  46         wli-tx4-ag300n)
  47                 ucidef_set_interface_lan "eth0"
  48                 ;;
  49
  50         *)
  51                 RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
  52                 if [ -n "${RT3X5X}" ]; then
  53                         ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
  54                 else
  55                         ucidef_set_interfaces_lan_wan "eth0" "eth1"
  56                 fi
  57                 ;;
  58         esac
  59 }
  60
  61 ramips_setup_macs()
  62 {
  63         local board="$1"
  64         local lan_mac=""
  65         local wan_mac=""
  66
  67         case $board in
  68         argus-atp52b | \
  69         b2c | \
  70         f5d8235-v1 | \
  71         nw718 | \
  72         rt-n15 | \
  73         wl-351)
  74                 lan_mac=$(ramips_get_mac_binary factory 4)
  75                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  76                 ;;
  77
  78         dir-300-b1 |\
  79         dir-300-b2 |\
  80         dir-600-b1)
  81                 lan_mac=$(ramips_get_mac_binary devdata 16388)
  82                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  83                 ;;
  84
  85         esr-9753 | \
  86         nbg-419n)
  87                 lan_mac=$(ramips_get_mac_binary factory 4)
  88                 wan_mac=$(ramips_get_mac_binary factory 40)
  89                 ;;
  90
  91         f5d8235-v2)
  92                 lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
  93                 wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
  94                 ;;
  95
  96         w502u)
  97                 lan_mac=$(ramips_get_mac_binary factory 40)
  98                 wan_mac=$(ramips_get_mac_binary factory 46)
  99                 ;;
 100
 101         wcr-150gn)
 102                 lan_mac=$(ramips_get_mac_binary factory 4)
 103                 wan_mac=$(ramips_get_mac_binary factory 40)
 104                 ;;
 105
 106         wli-tx4-ag300n)
 107                 lan_mac=$(ramips_get_mac_binary factory 4)
 108                 ;;
 109
 110         esac
 111
 112         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
 113         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
 114 }
 115
 116 [ -e /etc/config/network ] && exit 0
 117
 118 touch /etc/config/network
 119
 120 board=$(ramips_board_name)
 121
 122 ramips_setup_interfaces $board
 123 ramips_setup_macs $board
 124
 125 uci commit network
 126
 127 exit 0