[tools] firmware-utils: add a file {en,de}cryption tool, based on the PC1 encryption...
[openwrt.git] / package / nvram / src / crc.c
1 #include "nvram.h"
2
3 /*******************************************************************************
4 * crc8
5 *
6 * Computes a crc8 over the input data using the polynomial:
7 *
8 * x^8 + x^7 +x^6 + x^4 + x^2 + 1
9 *
10 * The caller provides the initial value (either CRC8_INIT_VALUE
11 * or the previous returned value) to allow for processing of
12 * discontiguous blocks of data. When generating the CRC the
13 * caller is responsible for complementing the final return value
14 * and inserting it into the byte stream. When checking, a final
15 * return value of CRC8_GOOD_VALUE indicates a valid CRC.
16 *
17 * Reference: Dallas Semiconductor Application Note 27
18 * Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms",
19 * ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
20 * ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
21 *
22 * ****************************************************************************
23 */
24
25 static const uint8_t crc8_table[256] = {
26 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
27 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
28 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
29 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
30 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
31 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
32 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
33 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
34 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
35 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
36 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
37 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
38 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
39 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
40 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
41 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
42 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
43 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
44 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
45 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
46 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
47 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
48 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
49 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
50 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
51 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
52 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
53 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
54 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
55 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
56 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
57 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
58 };
59
60 uint8_t hndcrc8 (
61 uint8_t * pdata, /* pointer to array of data to process */
62 uint32_t nbytes, /* number of input data bytes to process */
63 uint8_t crc /* either CRC8_INIT_VALUE or previous return value */
64 ) {
65 while (nbytes-- > 0)
66 crc = crc8_table[(crc ^ *pdata++) & 0xff];
67
68 return crc;
69 }
This page took 0.044907 seconds and 5 git commands to generate.