lzma loader patch from oleg, great thanks good work, saves another 300 kb flashmemory
[openwrt.git] / package / linux / kernel-source / include / sbsdram.h
1 /*
2 * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
3 *
4 * Copyright 2004, Broadcom Corporation
5 * All Rights Reserved.
6 *
7 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
8 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
9 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
10 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
11 * $Id$
12 */
13
14 #ifndef _SBSDRAM_H
15 #define _SBSDRAM_H
16
17 #ifndef _LANGUAGE_ASSEMBLY
18
19 /* Sonics side: SDRAM core registers */
20 typedef volatile struct sbsdramregs {
21 uint32 initcontrol; /* Generates external SDRAM initialization sequence */
22 uint32 config; /* Initializes external SDRAM mode register */
23 uint32 refresh; /* Controls external SDRAM refresh rate */
24 uint32 pad1;
25 uint32 pad2;
26 } sbsdramregs_t;
27
28 #endif
29
30 /* SDRAM initialization control (initcontrol) register bits */
31 #define SDRAM_CBR 0x0001 /* Writing 1 generates refresh cycle and toggles bit */
32 #define SDRAM_PRE 0x0002 /* Writing 1 generates precharge cycle and toggles bit */
33 #define SDRAM_MRS 0x0004 /* Writing 1 generates mode register select cycle and toggles bit */
34 #define SDRAM_EN 0x0008 /* When set, enables access to SDRAM */
35 #define SDRAM_16Mb 0x0000 /* Use 16 Megabit SDRAM */
36 #define SDRAM_64Mb 0x0010 /* Use 64 Megabit SDRAM */
37 #define SDRAM_128Mb 0x0020 /* Use 128 Megabit SDRAM */
38 #define SDRAM_RSVMb 0x0030 /* Use special SDRAM */
39 #define SDRAM_RST 0x0080 /* Writing 1 causes soft reset of controller */
40 #define SDRAM_SELFREF 0x0100 /* Writing 1 enables self refresh mode */
41 #define SDRAM_PWRDOWN 0x0200 /* Writing 1 causes controller to power down */
42 #define SDRAM_32BIT 0x0400 /* When set, indicates 32 bit SDRAM interface */
43 #define SDRAM_9BITCOL 0x0800 /* When set, indicates 9 bit column */
44
45 /* SDRAM configuration (config) register bits */
46 #define SDRAM_BURSTFULL 0x0000 /* Use full page bursts */
47 #define SDRAM_BURST8 0x0001 /* Use burst of 8 */
48 #define SDRAM_BURST4 0x0002 /* Use burst of 4 */
49 #define SDRAM_BURST2 0x0003 /* Use burst of 2 */
50 #define SDRAM_CAS3 0x0000 /* Use CAS latency of 3 */
51 #define SDRAM_CAS2 0x0004 /* Use CAS latency of 2 */
52
53 /* SDRAM refresh control (refresh) register bits */
54 #define SDRAM_REF(p) (((p)&0xff) | SDRAM_REF_EN) /* Refresh period */
55 #define SDRAM_REF_EN 0x8000 /* Writing 1 enables periodic refresh */
56
57 /* SDRAM Core default Init values (OCP ID 0x803) */
58 #define SDRAM_INIT MEM4MX16X2
59 #define SDRAM_CONFIG SDRAM_BURSTFULL
60 #define SDRAM_REFRESH SDRAM_REF(0x40)
61
62 #define MEM1MX16 0x009 /* 2 MB */
63 #define MEM1MX16X2 0x409 /* 4 MB */
64 #define MEM2MX8X2 0x809 /* 4 MB */
65 #define MEM2MX8X4 0xc09 /* 8 MB */
66 #define MEM2MX32 0x439 /* 8 MB */
67 #define MEM4MX16 0x019 /* 8 MB */
68 #define MEM4MX16X2 0x419 /* 16 MB */
69 #define MEM8MX8X2 0x819 /* 16 MB */
70 #define MEM8MX16 0x829 /* 16 MB */
71 #define MEM4MX32 0x429 /* 16 MB */
72 #define MEM8MX8X4 0xc19 /* 32 MB */
73 #define MEM8MX16X2 0xc29 /* 32 MB */
74
75 #endif /* _SBSDRAM_H */
This page took 0.048582 seconds and 5 git commands to generate.