target/linux/omap24xx/patches-2.6.38/510-cbus-retu-defines.patch

   1 --- a/drivers/cbus/retu.h
   2 +++ b/drivers/cbus/retu.h
   3 @@ -40,6 +40,8 @@
   4  #define RETU_REG_CTRL_CLR      0x0f    /* Regulator clear register */
   5  #define RETU_REG_CTRL_SET      0x10    /* Regulator set register */
   6  #define RETU_REG_STATUS                0x16    /* Status register */
   7 +#define  RETU_REG_STATUS_BATAVAIL      0x0100 /* Battery available */
   8 +#define  RETU_REG_STATUS_CHGPLUG       0x1000 /* Charger is plugged in */
   9  #define RETU_REG_WATCHDOG      0x17    /* Watchdog register */
  10  #define RETU_REG_AUDTXR                0x18    /* Audio Codec Tx register */
  11  #define RETU_REG_MAX           0x1f
  12 @@ -57,6 +59,23 @@
  13
  14  #define        MAX_RETU_IRQ_HANDLERS   16
  15
  16 +/* ADC channels */
  17 +#define RETU_ADC_GND           0x00 /* Ground */
  18 +#define RETU_ADC_BSI           0x01 /* Battery Size Indicator */
  19 +#define RETU_ADC_BATTEMP       0x02 /* Battery temperature */
  20 +#define RETU_ADC_CHGVOLT       0x03 /* Charger voltage */
  21 +#define RETU_ADC_HEADSET       0x04 /* Headset detection */
  22 +#define RETU_ADC_HOOKDET       0x05 /* Hook detection */
  23 +#define RETU_ADC_RFGP          0x06 /* RF GP */
  24 +#define RETU_ADC_WBTX          0x07 /* Wideband Tx detection */
  25 +#define RETU_ADC_BATTVOLT      0x08 /* Battery voltage measurement */
  26 +#define RETU_ADC_GND2          0x09 /* Ground */
  27 +#define RETU_ADC_LIGHTSENS     0x0A /* Light sensor */
  28 +#define RETU_ADC_LIGHTTEMP     0x0B /* Light sensor temperature */
  29 +#define RETU_ADC_BKUPVOLT      0x0C /* Backup battery voltage */
  30 +#define RETU_ADC_TEMP          0x0D /* RETU temperature */
  31 +
  32 +
  33  int retu_read_reg(struct device *child, unsigned reg);
  34  void retu_write_reg(struct device *child, unsigned reg, u16 val);
  35  void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,