target/linux/ixp4xx-2.6/patches/300-wg302v2.patch

   1 diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
   2 --- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig 2007-04-02 16:09:06.000000000 +0200
   3 +++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig    2007-04-02 16:01:25.000000000 +0200
   4 @@ -41,6 +41,14 @@
   5           7001 Access Point. For more information on this platform,
   6           see http://openwrt.org
   7
   8 +config MACH_WG302V2
   9 +       bool "Netgear WG302 v2 / WAG302 v2"
  10 +       select PCI
  11 +       help
  12 +         Say 'Y' here if you want your kernel to support Netgear's
  13 +         WG302 v2 or WAG302 v2 Access Points. For more information
  14 +         on this platform, see http://openwrt.org
  15 +
  16  config ARCH_IXDP425
  17         bool "IXDP425"
  18         help
  19 diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
  20 --- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile        2007-04-02 16:09:06.000000000 +0200
  21 +++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile   2007-04-02 16:09:25.000000000 +0200
  22 @@ -12,6 +12,7 @@
  23  obj-pci-$(CONFIG_MACH_NSLU2)           += nslu2-pci.o
  24  obj-pci-$(CONFIG_MACH_NAS100D)         += nas100d-pci.o
  25  obj-pci-$(CONFIG_MACH_GATEWAY7001)     += gateway7001-pci.o
  26 +obj-pci-$(CONFIG_MACH_WG302V2)         += wg302v2-pci.o
  27
  28  obj-y  += common.o
  29
  30 @@ -22,5 +23,6 @@
  31  obj-$(CONFIG_MACH_NSLU2)       += nslu2-setup.o nslu2-power.o
  32  obj-$(CONFIG_MACH_NAS100D)     += nas100d-setup.o nas100d-power.o
  33  obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
  34 +obj-$(CONFIG_MACH_WG302V2)     += wg302v2-setup.o
  35
  36  obj-$(CONFIG_PCI)              += $(obj-pci-$(CONFIG_PCI)) common-pci.o
  37 diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c
  38 --- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-pci.c   1970-01-01 01:00:00.000000000 +0100
  39 +++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-pci.c      2007-04-02 16:00:12.000000000 +0200
  40 @@ -0,0 +1,68 @@
  41 +/*
  42 + * arch/arch/mach-ixp4xx/wg302v2-pci.c
  43 + *
  44 + * PCI setup routines for the Netgear WG302 v2 and WAG302 v2
  45 + *
  46 + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
  47 + *
  48 + * based on coyote-pci.c:
  49 + *     Copyright (C) 2002 Jungo Software Technologies.
  50 + *     Copyright (C) 2003 MontaVista Software, Inc.
  51 + *
  52 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
  53 + *
  54 + * This program is free software; you can redistribute it and/or modify
  55 + * it under the terms of the GNU General Public License version 2 as
  56 + * published by the Free Software Foundation.
  57 + *
  58 + */
  59 +
  60 +#include <linux/kernel.h>
  61 +#include <linux/pci.h>
  62 +#include <linux/init.h>
  63 +#include <linux/irq.h>
  64 +
  65 +#include <asm/mach-types.h>
  66 +#include <asm/hardware.h>
  67 +#include <asm/irq.h>
  68 +
  69 +#include <asm/mach/pci.h>
  70 +
  71 +extern void ixp4xx_pci_preinit(void);
  72 +extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
  73 +extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
  74 +
  75 +void __init wg302v2_pci_preinit(void)
  76 +{
  77 +       set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
  78 +       set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
  79 +
  80 +       ixp4xx_pci_preinit();
  81 +}
  82 +
  83 +static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
  84 +{
  85 +       if (slot == 1)
  86 +               return IRQ_IXP4XX_GPIO8;
  87 +       else if (slot == 2)
  88 +               return IRQ_IXP4XX_GPIO9;
  89 +       else return -1;
  90 +}
  91 +
  92 +struct hw_pci wg302v2_pci __initdata = {
  93 +       .nr_controllers = 1,
  94 +       .preinit =        wg302v2_pci_preinit,
  95 +       .swizzle =        pci_std_swizzle,
  96 +       .setup =          ixp4xx_setup,
  97 +       .scan =           ixp4xx_scan_bus,
  98 +       .map_irq =        wg302v2_map_irq,
  99 +};
 100 +
 101 +int __init wg302v2_pci_init(void)
 102 +{
 103 +       if (machine_is_wg302v2())
 104 +               pci_common_init(&wg302v2_pci);
 105 +       return 0;
 106 +}
 107 +
 108 +subsys_initcall(wg302v2_pci_init);
 109 diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c
 110 --- linux-2.6.19.2/arch/arm/mach-ixp4xx/wg302v2-setup.c 1970-01-01 01:00:00.000000000 +0100
 111 +++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/wg302v2-setup.c    2007-04-02 16:08:57.000000000 +0200
 112 @@ -0,0 +1,107 @@
 113 +/*
 114 + * arch/arm/mach-ixp4xx/wg302-setup.c
 115 + *
 116 + * Board setup for the Netgear WG302 v2 and WAG302 v2
 117 + *
 118 + * based on coyote-setup.c:
 119 + *     Copyright (C) 2003-2005 MontaVista Software, Inc.
 120 + *
 121 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 122 + *
 123 + */
 124 +
 125 +#include <linux/kernel.h>
 126 +#include <linux/init.h>
 127 +#include <linux/device.h>
 128 +#include <linux/serial.h>
 129 +#include <linux/tty.h>
 130 +#include <linux/serial_8250.h>
 131 +#include <linux/slab.h>
 132 +
 133 +#include <asm/types.h>
 134 +#include <asm/setup.h>
 135 +#include <asm/memory.h>
 136 +#include <asm/hardware.h>
 137 +#include <asm/irq.h>
 138 +#include <asm/mach-types.h>
 139 +#include <asm/mach/arch.h>
 140 +#include <asm/mach/flash.h>
 141 +
 142 +static struct flash_platform_data wg302v2_flash_data = {
 143 +       .map_name       = "cfi_probe",
 144 +       .width          = 2,
 145 +};
 146 +
 147 +static struct resource wg302v2_flash_resource = {
 148 +       .flags          = IORESOURCE_MEM,
 149 +};
 150 +
 151 +static struct platform_device wg302v2_flash = {
 152 +       .name           = "IXP4XX-Flash",
 153 +       .id             = 0,
 154 +       .dev            = {
 155 +               .platform_data = &wg302v2_flash_data,
 156 +       },
 157 +       .num_resources  = 1,
 158 +       .resource       = &wg302v2_flash_resource,
 159 +};
 160 +
 161 +static struct resource wg302v2_uart_resource = {
 162 +       .start  = IXP4XX_UART2_BASE_PHYS,
 163 +       .end    = IXP4XX_UART2_BASE_PHYS + 0x0fff,
 164 +       .flags  = IORESOURCE_MEM,
 165 +};
 166 +
 167 +static struct plat_serial8250_port wg302v2_uart_data[] = {
 168 +       {
 169 +               .mapbase        = IXP4XX_UART2_BASE_PHYS,
 170 +               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 171 +               .irq            = IRQ_IXP4XX_UART2,
 172 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 173 +               .iotype         = UPIO_MEM,
 174 +               .regshift       = 2,
 175 +               .uartclk        = IXP4XX_UART_XTAL,
 176 +       },
 177 +       { },
 178 +};
 179 +
 180 +static struct platform_device wg302v2_uart = {
 181 +       .name           = "serial8250",
 182 +       .id             = PLAT8250_DEV_PLATFORM,
 183 +       .dev                    = {
 184 +               .platform_data  = wg302v2_uart_data,
 185 +       },
 186 +       .num_resources  = 1,
 187 +       .resource       = &wg302v2_uart_resource,
 188 +};
 189 +
 190 +static struct platform_device *wg302v2_devices[] __initdata = {
 191 +       &wg302v2_flash,
 192 +       &wg302v2_uart,
 193 +};
 194 +
 195 +static void __init wg302v2_init(void)
 196 +{
 197 +       ixp4xx_sys_init();
 198 +
 199 +       wg302v2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 200 +       wg302v2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 201 +
 202 +       *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 203 +       *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 204 +
 205 +       platform_add_devices(wg302v2_devices, ARRAY_SIZE(wg302v2_devices));
 206 +}
 207 +
 208 +#ifdef CONFIG_MACH_WG302V2
 209 +MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
 210 +       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 211 +       .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
 212 +       .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 213 +       .map_io         = ixp4xx_map_io,
 214 +       .init_irq       = ixp4xx_init_irq,
 215 +       .timer          = &ixp4xx_timer,
 216 +       .boot_params    = 0x0100,
 217 +       .init_machine   = wg302v2_init,
 218 +MACHINE_END
 219 +#endif
 220 diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
 221 --- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h     2007-04-02 16:09:06.000000000 +0200
 222 +++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h        2007-04-02 16:02:04.000000000 +0200
 223 @@ -40,7 +40,7 @@
 224         /*
 225          * Some boards are using UART2 as console
 226          */
 227 -       if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
 228 +       if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2())
 229                 uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 230         else
 231                 uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;