openwrt/scripts/flash.sh

   1 #!/bin/bash
   2
   3 # flash script for linksys and asus routers
   4 #
   5 # Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su>
   6 # Copyright (C) 2005 by Waldemar Brodkorb <wbx@dass-it.de>
   7 #
   8 # This program is free software; you can redistribute it and/or modify
   9 # it under the terms of the GNU General Public License as published by
  10 # the Free Software Foundation; either version 2 of the License, or
  11 # (at your option) any later version.
  12 #
  13 # This program is distributed in the hope that it will be useful,
  14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
  16 # General Public License for more details.
  17 #
  18 # You should have received a copy of the GNU General Public License
  19 # along with this program; if not, write to the Free Software
  20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  21 #
  22
  23 if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then
  24     echo Usage: $0 firmware vendor
  25 cat << EOF
  26 IMPORTANT:
  27 Notes for Linksys Routers:
  28    be sure you have set boot_wait to yes. Power on your router
  29    after executing this script.
  30    Use openwrt-gs-code.bin or openwrt-g-code.bin as firmware.
  31
  32 Notes for Asus Routers:
  33    be sure POWER led is flashing (If this is not a case
  34    poweroff the device, push the reset button & power on
  35    it again, then release button)
  36    Use openwrt-linux.trx as firmware.
  37
  38 1) connect your pc to the LAN port
  39 2) be sure your link is up and has an address in the
  40    192.168.1.0/24 address range (and not the 192.168.1.1)
  41 EOF
  42     exit 0
  43 fi
  44 if [ "$2" == "asus" ]; then
  45 echo Confirming IP address setting...
  46 echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1
  47 echo Flashing 192.168.1.1 using $1...
  48 echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1
  49 echo Please wait until leds stops flashing.
  50 elif [ "$2" == "linksys" ]; then
  51 echo Flashing 192.168.1.1 using $1...
  52 echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1
  53 echo Please wait until power led stops flashing. Then you can login via telnet 192.168.1.1
  54 fi