[kernel] make 64-bits MIPS kernel compile again on arch/mips/kernel/module.c
[openwrt.git] / target / linux / ifxmips / files / arch / mips / pci / pci-ifxmips.c
1 #include <linux/types.h>
2 #include <linux/pci.h>
3 #include <linux/kernel.h>
4 #include <linux/init.h>
5 #include <linux/delay.h>
6 #include <linux/mm.h>
7 #include <asm/ifxmips/ifxmips.h>
8 #include <asm/ifxmips/ifxmips_irq.h>
9 #include <asm/ifxmips/ifxmips_cgu.h>
10 #include <asm/addrspace.h>
11 #include <linux/vmalloc.h>
12
13 #define IFXMIPS_PCI_MEM_BASE 0x18000000
14 #define IFXMIPS_PCI_MEM_SIZE 0x02000000
15 #define IFXMIPS_PCI_IO_BASE 0x1AE00000
16 #define IFXMIPS_PCI_IO_SIZE 0x00200000
17
18 extern int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
19 extern int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
20
21 struct pci_ops ifxmips_pci_ops =
22 {
23 .read = ifxmips_pci_read_config_dword,
24 .write = ifxmips_pci_write_config_dword
25 };
26
27 static struct resource pci_io_resource =
28 {
29 .name = "io pci IO space",
30 .start = IFXMIPS_PCI_IO_BASE,
31 .end = IFXMIPS_PCI_IO_BASE + IFXMIPS_PCI_IO_SIZE - 1,
32 .flags = IORESOURCE_IO
33 };
34
35 static struct resource pci_mem_resource =
36 {
37 .name = "ext pci memory space",
38 .start = IFXMIPS_PCI_MEM_BASE,
39 .end = IFXMIPS_PCI_MEM_BASE + IFXMIPS_PCI_MEM_SIZE - 1,
40 .flags = IORESOURCE_MEM
41 };
42
43 static struct pci_controller ifxmips_pci_controller =
44 {
45 .pci_ops = &ifxmips_pci_ops,
46 .mem_resource = &pci_mem_resource,
47 .mem_offset = 0x00000000UL,
48 .io_resource = &pci_io_resource,
49 .io_offset = 0x00000000UL,
50 };
51
52 u32 ifxmips_pci_mapped_cfg;
53 int ifxmips_pci_external_clock = 0;
54
55 static int __init
56 ifxmips_pci_set_external_clk(char *str)
57 {
58 printk("cgu: setting up external pci clock\n");
59 ifxmips_pci_external_clock = 1;
60 return 1;
61 }
62 __setup("pci_external_clk", ifxmips_pci_set_external_clk);
63
64 int
65 pcibios_plat_dev_init(struct pci_dev *dev)
66 {
67 u8 pin;
68
69 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
70 switch(pin)
71 {
72 case 0:
73 break;
74 case 1:
75 //falling edge level triggered:0x4, low level:0xc, rising edge:0x2
76 ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_CON) | 0xc, IFXMIPS_EBU_PCC_CON);
77 ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_IEN) | 0x10, IFXMIPS_EBU_PCC_IEN);
78 break;
79 case 2:
80 case 3:
81 case 4:
82 printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
83 default:
84 printk ("WARNING: invalid interrupt pin %d\n", pin);
85 return 1;
86 }
87 return 0;
88 }
89
90 static void __init
91 ifxmips_pci_startup(void)
92 {
93 u32 temp_buffer;
94
95 cgu_setup_pci_clk(ifxmips_pci_external_clock);
96
97 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
98 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OD) | (1 << 5), IFXMIPS_GPIO_P1_OD);
99 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | (1 << 5), IFXMIPS_GPIO_P1_DIR);
100 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL1);
101 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL0);
102 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) & ~0x2000, IFXMIPS_GPIO_P1_DIR);
103 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | 0x4000, IFXMIPS_GPIO_P1_DIR);
104 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~0x6000, IFXMIPS_GPIO_P1_ALTSEL1);
105 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) | 0x6000, IFXMIPS_GPIO_P1_ALTSEL0);
106 /* enable auto-switching between PCI and EBU */
107 ifxmips_w32(0xa, PCI_CR_CLK_CTRL);
108 /* busy, i.e. configuration is not done, PCI access has to be retried */
109 ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
110 wmb ();
111 /* BUS Master/IO/MEM access */
112 ifxmips_w32(ifxmips_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
113
114 /* enable external 2 PCI masters */
115 temp_buffer = ifxmips_r32(PCI_CR_PC_ARB);
116 temp_buffer &= (~(0xf << 16));
117 /* enable internal arbiter */
118 temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
119 /* enable internal PCI master reqest */
120 temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
121
122 /* enable EBU reqest */
123 temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
124
125 /* enable all external masters request */
126 temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
127 ifxmips_w32(temp_buffer, PCI_CR_PC_ARB);
128 wmb ();
129
130 ifxmips_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
131 ifxmips_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
132 ifxmips_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
133 ifxmips_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
134 ifxmips_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
135 ifxmips_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
136 ifxmips_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
137 ifxmips_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
138 ifxmips_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
139 ifxmips_w32(0x0e000008, PCI_CR_BAR11MASK);
140 ifxmips_w32(0, PCI_CR_PCI_ADDR_MAP11);
141 ifxmips_w32(0, PCI_CS_BASE_ADDR1);
142 #ifdef CONFIG_SWAP_IO_SPACE
143 /* both TX and RX endian swap are enabled */
144 ifxmips_w32(ifxmips_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
145 wmb ();
146 #endif
147 /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
148 ifxmips_w32(ifxmips_r32(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
149 ifxmips_w32(ifxmips_r32(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
150 /*use 8 dw burst length */
151 ifxmips_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
152 ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
153 wmb();
154 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) & ~(1 << 5), IFXMIPS_GPIO_P1_OUT);
155 wmb();
156 mdelay(1);
157 ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
158 }
159
160 int __init
161 pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
162 switch(slot)
163 {
164 case 13:
165 /* IDSEL = AD29 --> USB Host Controller */
166 return (INT_NUM_IM1_IRL0 + 17);
167 case 14:
168 /* IDSEL = AD30 --> mini PCI connector */
169 return (INT_NUM_IM0_IRL0 + 22);
170 default:
171 printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
172 return 0;
173 }
174 }
175
176 int __init
177 pcibios_init(void)
178 {
179 extern int pci_probe_only;
180
181 pci_probe_only = 0;
182 printk("PCI: Probing PCI hardware on host bus 0.\n");
183 ifxmips_pci_startup ();
184 // IFXMIPS_PCI_REG32(PCI_CR_CLK_CTRL_REG) &= (~8);
185 ifxmips_pci_mapped_cfg = (u32)ioremap_nocache(0x17000000, 0x800 * 16);
186 printk("IFXMips PCI mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_mapped_cfg);
187 ifxmips_pci_controller.io_map_base = (unsigned long)ioremap(IFXMIPS_PCI_IO_BASE, IFXMIPS_PCI_IO_SIZE - 1);
188 printk("IFXMips PCI I/O mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_controller.io_map_base);
189 register_pci_controller(&ifxmips_pci_controller);
190 return 0;
191 }
192
193 arch_initcall(pcibios_init);
This page took 0.056988 seconds and 5 git commands to generate.