ath: open up a few safe 5ghz channels in the world regdomain to make the regulatory...
[openwrt.git] / package / ifxmips-dsl-api / src / ifxmips_mei_interface.h
1 /******************************************************************************
2
3 Copyright (c) 2009
4 Infineon Technologies AG
5 Am Campeon 1-12; 81726 Munich, Germany
6
7 For licensing information, see the file 'LICENSE' in the root folder of
8 this software module.
9
10 ******************************************************************************/
11
12 #ifndef IFXMIPS_MEI_H
13 #define IFXMIPS_MEI_H
14
15 #define CONFIG_DANUBE 1
16
17 #if !defined(CONFIG_DANUBE) && !defined(CONFIG_AMAZON_SE) && !defined(CONFIG_AR9) && !defined(CONFIG_VR9)
18 #error Platform undefined!!!
19 #endif
20
21 #ifdef IFX_MEI_BSP
22 /** This is the character datatype. */
23 typedef char DSL_char_t;
24 /** This is the unsigned 8-bit datatype. */
25 typedef unsigned char DSL_uint8_t;
26 /** This is the signed 8-bit datatype. */
27 typedef signed char DSL_int8_t;
28 /** This is the unsigned 16-bit datatype. */
29 typedef unsigned short DSL_uint16_t;
30 /** This is the signed 16-bit datatype. */
31 typedef signed short DSL_int16_t;
32 /** This is the unsigned 32-bit datatype. */
33 typedef unsigned long DSL_uint32_t;
34 /** This is the signed 32-bit datatype. */
35 typedef signed long DSL_int32_t;
36 /** This is the float datatype. */
37 typedef float DSL_float_t;
38 /** This is the void datatype. */
39 typedef void DSL_void_t;
40 /** integer type, width is depending on processor arch */
41 typedef int DSL_int_t;
42 /** unsigned integer type, width is depending on processor arch */
43 typedef unsigned int DSL_uint_t;
44 typedef struct file DSL_DRV_file_t;
45 typedef struct inode DSL_DRV_inode_t;
46
47 /**
48 * Defines all possible CMV groups
49 * */
50 typedef enum {
51 DSL_CMV_GROUP_CNTL = 1,
52 DSL_CMV_GROUP_STAT = 2,
53 DSL_CMV_GROUP_INFO = 3,
54 DSL_CMV_GROUP_TEST = 4,
55 DSL_CMV_GROUP_OPTN = 5,
56 DSL_CMV_GROUP_RATE = 6,
57 DSL_CMV_GROUP_PLAM = 7,
58 DSL_CMV_GROUP_CNFG = 8
59 } DSL_CmvGroup_t;
60 /**
61 * Defines all opcode types
62 * */
63 typedef enum {
64 H2D_CMV_READ = 0x00,
65 H2D_CMV_WRITE = 0x04,
66 H2D_CMV_INDICATE_REPLY = 0x10,
67 H2D_ERROR_OPCODE_UNKNOWN =0x20,
68 H2D_ERROR_CMV_UNKNOWN =0x30,
69
70 D2H_CMV_READ_REPLY =0x01,
71 D2H_CMV_WRITE_REPLY = 0x05,
72 D2H_CMV_INDICATE = 0x11,
73 D2H_ERROR_OPCODE_UNKNOWN = 0x21,
74 D2H_ERROR_CMV_UNKNOWN = 0x31,
75 D2H_ERROR_CMV_READ_NOT_AVAILABLE = 0x41,
76 D2H_ERROR_CMV_WRITE_ONLY = 0x51,
77 D2H_ERROR_CMV_READ_ONLY = 0x61,
78
79 H2D_DEBUG_READ_DM = 0x02,
80 H2D_DEBUG_READ_PM = 0x06,
81 H2D_DEBUG_WRITE_DM = 0x0a,
82 H2D_DEBUG_WRITE_PM = 0x0e,
83
84 D2H_DEBUG_READ_DM_REPLY = 0x03,
85 D2H_DEBUG_READ_FM_REPLY = 0x07,
86 D2H_DEBUG_WRITE_DM_REPLY = 0x0b,
87 D2H_DEBUG_WRITE_FM_REPLY = 0x0f,
88 D2H_ERROR_ADDR_UNKNOWN = 0x33,
89
90 D2H_AUTONOMOUS_MODEM_READY_MSG = 0xf1
91 } DSL_CmvOpcode_t;
92
93 /* mutex macros */
94 #define MEI_MUTEX_INIT(id,flag) \
95 sema_init(&id,flag)
96 #define MEI_MUTEX_LOCK(id) \
97 down_interruptible(&id)
98 #define MEI_MUTEX_UNLOCK(id) \
99 up(&id)
100 #define MEI_WAIT(ms) \
101 {\
102 set_current_state(TASK_INTERRUPTIBLE);\
103 schedule_timeout(ms);\
104 }
105 #define MEI_INIT_WAKELIST(name,queue) \
106 init_waitqueue_head(&queue)
107
108 /* wait for an event, timeout is measured in ms */
109 #define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\
110 interruptible_sleep_on_timeout(&ev,timeout * HZ / 1000)
111 #define MEI_WAKEUP_EVENT(ev)\
112 wake_up_interruptible(&ev)
113 #endif /* IFX_MEI_BSP */
114
115 /*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/
116 #define ME_DX_DATA (0x0000)
117 #define ME_VERSION (0x0004)
118 #define ME_ARC_GP_STAT (0x0008)
119 #define ME_DX_STAT (0x000C)
120 #define ME_DX_AD (0x0010)
121 #define ME_DX_MWS (0x0014)
122 #define ME_ME2ARC_INT (0x0018)
123 #define ME_ARC2ME_STAT (0x001C)
124 #define ME_ARC2ME_MASK (0x0020)
125 #define ME_DBG_WR_AD (0x0024)
126 #define ME_DBG_RD_AD (0x0028)
127 #define ME_DBG_DATA (0x002C)
128 #define ME_DBG_DECODE (0x0030)
129 #define ME_CONFIG (0x0034)
130 #define ME_RST_CTRL (0x0038)
131 #define ME_DBG_MASTER (0x003C)
132 #define ME_CLK_CTRL (0x0040)
133 #define ME_BIST_CTRL (0x0044)
134 #define ME_BIST_STAT (0x0048)
135 #define ME_XDATA_BASE_SH (0x004c)
136 #define ME_XDATA_BASE (0x0050)
137 #define ME_XMEM_BAR_BASE (0x0054)
138 #define ME_XMEM_BAR0 (0x0054)
139 #define ME_XMEM_BAR1 (0x0058)
140 #define ME_XMEM_BAR2 (0x005C)
141 #define ME_XMEM_BAR3 (0x0060)
142 #define ME_XMEM_BAR4 (0x0064)
143 #define ME_XMEM_BAR5 (0x0068)
144 #define ME_XMEM_BAR6 (0x006C)
145 #define ME_XMEM_BAR7 (0x0070)
146 #define ME_XMEM_BAR8 (0x0074)
147 #define ME_XMEM_BAR9 (0x0078)
148 #define ME_XMEM_BAR10 (0x007C)
149 #define ME_XMEM_BAR11 (0x0080)
150 #define ME_XMEM_BAR12 (0x0084)
151 #define ME_XMEM_BAR13 (0x0088)
152 #define ME_XMEM_BAR14 (0x008C)
153 #define ME_XMEM_BAR15 (0x0090)
154 #define ME_XMEM_BAR16 (0x0094)
155
156 #define WHILE_DELAY 20000
157 /*
158 ** Define where in ME Processor's memory map the Stratify chip lives
159 */
160
161 #define MAXSWAPSIZE (8 * 1024) //8k *(32bits)
162
163 // Mailboxes
164 #define MSG_LENGTH 16 // x16 bits
165 #define YES_REPLY 1
166 #define NO_REPLY 0
167
168 #define CMV_TIMEOUT 1000 //jiffies
169
170 // Block size per BAR
171 #define SDRAM_SEGMENT_SIZE (64*1024)
172 // Number of Bar registers
173 #define MAX_BAR_REGISTERS (17)
174
175 #define XDATA_REGISTER (15)
176
177 // ARC register addresss
178 #define ARC_STATUS 0x0
179 #define ARC_LP_START 0x2
180 #define ARC_LP_END 0x3
181 #define ARC_DEBUG 0x5
182 #define ARC_INT_MASK 0x10A
183
184 #define IRAM0_BASE (0x00000)
185 #define IRAM1_BASE (0x04000)
186 #if defined(CONFIG_DANUBE)
187 #define BRAM_BASE (0x0A000)
188 #elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9)
189 #define BRAM_BASE (0x08000)
190 #endif
191 #define XRAM_BASE (0x18000)
192 #define YRAM_BASE (0x1A000)
193 #define EXT_MEM_BASE (0x80000)
194 #define ARC_GPIO_CTRL (0xC030)
195 #define ARC_GPIO_DATA (0xC034)
196
197 #define IRAM0_SIZE (16*1024)
198 #define IRAM1_SIZE (16*1024)
199 #define BRAM_SIZE (12*1024)
200 #define XRAM_SIZE (8*1024)
201 #define YRAM_SIZE (8*1024)
202 #define EXT_MEM_SIZE (1536*1024)
203
204 #define ADSL_BASE (0x20000)
205 #define CRI_BASE (ADSL_BASE + 0x11F00)
206 #define CRI_CCR0 (CRI_BASE + 0x00)
207 #define CRI_RST (CRI_BASE + 0x04*4)
208 #define ADSL_DILV_BASE (ADSL_BASE+0x20000)
209
210 //
211 #define IRAM0_ADDR_BIT_MASK 0xFFF
212 #define IRAM1_ADDR_BIT_MASK 0xFFF
213 #define BRAM_ADDR_BIT_MASK 0xFFF
214 #define RX_DILV_ADDR_BIT_MASK 0x1FFF
215
216 /*** Bit definitions ***/
217 #define ARC_AUX_HALT (1 << 25)
218 #define ARC_DEBUG_HALT (1 << 1)
219 #define FALSE 0
220 #define TRUE 1
221 #define BIT0 (1<<0)
222 #define BIT1 (1<<1)
223 #define BIT2 (1<<2)
224 #define BIT3 (1<<3)
225 #define BIT4 (1<<4)
226 #define BIT5 (1<<5)
227 #define BIT6 (1<<6)
228 #define BIT7 (1<<7)
229 #define BIT8 (1<<8)
230 #define BIT9 (1<<9)
231 #define BIT10 (1<<10)
232 #define BIT11 (1<<11)
233 #define BIT12 (1<<12)
234 #define BIT13 (1<<13)
235 #define BIT14 (1<<14)
236 #define BIT15 (1<<15)
237 #define BIT16 (1<<16)
238 #define BIT17 (1<<17)
239 #define BIT18 (1<<18)
240 #define BIT19 (1<<19)
241 #define BIT20 (1<<20)
242 #define BIT21 (1<<21)
243 #define BIT22 (1<<22)
244 #define BIT23 (1<<23)
245 #define BIT24 (1<<24)
246 #define BIT25 (1<<25)
247 #define BIT26 (1<<26)
248 #define BIT27 (1<<27)
249 #define BIT28 (1<<28)
250 #define BIT29 (1<<29)
251 #define BIT30 (1<<30)
252 #define BIT31 (1<<31)
253
254 // CRI_CCR0 Register definitions
255 #define CLK_2M_MODE_ENABLE BIT6
256 #define ACL_CLK_MODE_ENABLE BIT4
257 #define FDF_CLK_MODE_ENABLE BIT2
258 #define STM_CLK_MODE_ENABLE BIT0
259
260 // CRI_RST Register definitions
261 #define FDF_SRST BIT3
262 #define MTE_SRST BIT2
263 #define FCI_SRST BIT1
264 #define AAI_SRST BIT0
265
266 // MEI_TO_ARC_INTERRUPT Register definitions
267 #define MEI_TO_ARC_INT1 BIT3
268 #define MEI_TO_ARC_INT0 BIT2
269 #define MEI_TO_ARC_CS_DONE BIT1 //need to check
270 #define MEI_TO_ARC_MSGAV BIT0
271
272 // ARC_TO_MEI_INTERRUPT Register definitions
273 #define ARC_TO_MEI_INT1 BIT8
274 #define ARC_TO_MEI_INT0 BIT7
275 #define ARC_TO_MEI_CS_REQ BIT6
276 #define ARC_TO_MEI_DBG_DONE BIT5
277 #define ARC_TO_MEI_MSGACK BIT4
278 #define ARC_TO_MEI_NO_ACCESS BIT3
279 #define ARC_TO_MEI_CHECK_AAITX BIT2
280 #define ARC_TO_MEI_CHECK_AAIRX BIT1
281 #define ARC_TO_MEI_MSGAV BIT0
282
283 // ARC_TO_MEI_INTERRUPT_MASK Register definitions
284 #define GP_INT1_EN BIT8
285 #define GP_INT0_EN BIT7
286 #define CS_REQ_EN BIT6
287 #define DBG_DONE_EN BIT5
288 #define MSGACK_EN BIT4
289 #define NO_ACC_EN BIT3
290 #define AAITX_EN BIT2
291 #define AAIRX_EN BIT1
292 #define MSGAV_EN BIT0
293
294 #define MEI_SOFT_RESET BIT0
295
296 #define HOST_MSTR BIT0
297
298 #define JTAG_MASTER_MODE 0x0
299 #define MEI_MASTER_MODE HOST_MSTR
300
301 // MEI_DEBUG_DECODE Register definitions
302 #define MEI_DEBUG_DEC_MASK (0x3)
303 #define MEI_DEBUG_DEC_AUX_MASK (0x0)
304 #define ME_DBG_DECODE_DMP1_MASK (0x1)
305 #define MEI_DEBUG_DEC_DMP2_MASK (0x2)
306 #define MEI_DEBUG_DEC_CORE_MASK (0x3)
307
308 #define AUX_STATUS (0x0)
309 #define AUX_ARC_GPIO_CTRL (0x10C)
310 #define AUX_ARC_GPIO_DATA (0x10D)
311 // ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
312 // page swap requests.
313 #if defined(CONFIG_DANUBE)
314 #define OMBOX_BASE 0xDF80
315 #define ARC_TO_MEI_MAILBOX 0xDFA0
316 #define IMBOX_BASE 0xDFC0
317 #define MEI_TO_ARC_MAILBOX 0xDFD0
318 #elif defined(CONFIG_AMAZON_SE) || defined(CONFIG_AR9) || defined(CONFIG_VR9)
319 #define OMBOX_BASE 0xAF80
320 #define ARC_TO_MEI_MAILBOX 0xAFA0
321 #define IMBOX_BASE 0xAFC0
322 #define MEI_TO_ARC_MAILBOX 0xAFD0
323 #endif
324
325 #define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C)
326 #define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C)
327 #define OMBOX1 (OMBOX_BASE+0x4)
328
329 // Codeswap request messages are indicated by setting BIT31
330 #define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000)
331
332 // Clear Eoc messages received are indicated by setting BIT17
333 #define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000)
334 #define OMB_REBOOT_INTERRUPT_CODE (1 << 18)
335
336 /*
337 ** Swap page header
338 */
339 // Page must be loaded at boot time if size field has BIT31 set
340 #define BOOT_FLAG (BIT31)
341 #define BOOT_FLAG_MASK ~BOOT_FLAG
342
343 #define FREE_RELOAD 1
344 #define FREE_SHOWTIME 2
345 #define FREE_ALL 3
346
347 // marcos
348 #define IFX_MEI_WRITE_REGISTER_L(data,addr) *((volatile u32*)(addr)) = (u32)(data)
349 #define IFX_MEI_READ_REGISTER_L(addr) (*((volatile u32*)(addr)))
350 #define SET_BIT(reg, mask) reg |= (mask)
351 #define CLEAR_BIT(reg, mask) reg &= (~mask)
352 #define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
353 //#define SET_BITS(reg, mask) SET_BIT(reg, mask)
354 #define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
355
356 #define ALIGN_SIZE ( 1L<<10 ) //1K size align
357 #define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
358
359 // swap marco
360 #define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
361 #define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
362
363
364 #ifdef CONFIG_PROC_FS
365 typedef struct reg_entry
366 {
367 int *flag;
368 char name[30]; /* big enough to hold names */
369 char description[100]; /* big enough to hold description */
370 unsigned short low_ino;
371 } reg_entry_t;
372 #endif
373 // Swap page header describes size in 32-bit words, load location, and image offset
374 // for program and/or data segments
375 typedef struct _arc_swp_page_hdr {
376 u32 p_offset; //Offset bytes of progseg from beginning of image
377 u32 p_dest; //Destination addr of progseg on processor
378 u32 p_size; //Size in 32-bitwords of program segment
379 u32 d_offset; //Offset bytes of dataseg from beginning of image
380 u32 d_dest; //Destination addr of dataseg on processor
381 u32 d_size; //Size in 32-bitwords of data segment
382 } ARC_SWP_PAGE_HDR;
383
384 /*
385 ** Swap image header
386 */
387 #define GET_PROG 0 // Flag used for program mem segment
388 #define GET_DATA 1 // Flag used for data mem segment
389
390 // Image header contains size of image, checksum for image, and count of
391 // page headers. Following that are 'count' page headers followed by
392 // the code and/or data segments to be loaded
393 typedef struct _arc_img_hdr {
394 u32 size; // Size of binary image in bytes
395 u32 checksum; // Checksum for image
396 u32 count; // Count of swp pages in image
397 ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy
398 } ARC_IMG_HDR;
399
400 typedef struct smmu_mem_info {
401 int type;
402 int boot;
403 unsigned long nCopy;
404 unsigned long size;
405 unsigned char *address;
406 unsigned char *org_address;
407 } smmu_mem_info_t;
408
409 #ifdef __KERNEL__
410 typedef struct ifx_mei_device_private {
411 int modem_ready;
412 int arcmsgav;
413 int cmv_reply;
414 int cmv_waiting;
415 // Mei to ARC CMV count, reply count, ARC Indicator count
416 int modem_ready_cnt;
417 int cmv_count;
418 int reply_count;
419 unsigned long image_size;
420 int nBar;
421 u16 Recent_indicator[MSG_LENGTH];
422
423 u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
424
425 smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
426 ARC_IMG_HDR *img_hdr;
427 // to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
428 wait_queue_head_t wait_queue_arcmsgav;
429 wait_queue_head_t wait_queue_modemready;
430 struct semaphore mei_cmv_sema;
431 } ifx_mei_device_private_t;
432 #endif
433 typedef struct winhost_message {
434 union {
435 u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
436 u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
437 } msg;
438 } DSL_DEV_WinHost_Message_t;
439 /********************************************************************************************************
440 * DSL CPE API Driver Stack Interface Definitions
441 * *****************************************************************************************************/
442 /** IOCTL codes for bsp driver */
443 #define DSL_IOC_MEI_BSP_MAGIC 's'
444
445 #define DSL_FIO_BSP_DSL_START _IO (DSL_IOC_MEI_BSP_MAGIC, 0)
446 #define DSL_FIO_BSP_RUN _IO (DSL_IOC_MEI_BSP_MAGIC, 1)
447 #define DSL_FIO_BSP_FREE_RESOURCE _IO (DSL_IOC_MEI_BSP_MAGIC, 2)
448 #define DSL_FIO_BSP_RESET _IO (DSL_IOC_MEI_BSP_MAGIC, 3)
449 #define DSL_FIO_BSP_REBOOT _IO (DSL_IOC_MEI_BSP_MAGIC, 4)
450 #define DSL_FIO_BSP_HALT _IO (DSL_IOC_MEI_BSP_MAGIC, 5)
451 #define DSL_FIO_BSP_BOOTDOWNLOAD _IO (DSL_IOC_MEI_BSP_MAGIC, 6)
452 #define DSL_FIO_BSP_JTAG_ENABLE _IO (DSL_IOC_MEI_BSP_MAGIC, 7)
453 #define DSL_FIO_FREE_RESOURCE _IO (DSL_IOC_MEI_BSP_MAGIC, 8)
454 #define DSL_FIO_ARC_MUX_TEST _IO (DSL_IOC_MEI_BSP_MAGIC, 9)
455 #define DSL_FIO_BSP_REMOTE _IOW (DSL_IOC_MEI_BSP_MAGIC, 10, u32)
456 #define DSL_FIO_BSP_GET_BASE_ADDRESS _IOR (DSL_IOC_MEI_BSP_MAGIC, 11, u32)
457 #define DSL_FIO_BSP_IS_MODEM_READY _IOR (DSL_IOC_MEI_BSP_MAGIC, 12, u32)
458 #define DSL_FIO_BSP_GET_VERSION _IOR (DSL_IOC_MEI_BSP_MAGIC, 13, DSL_DEV_Version_t)
459 #define DSL_FIO_BSP_CMV_WINHOST _IOWR(DSL_IOC_MEI_BSP_MAGIC, 14, DSL_DEV_WinHost_Message_t)
460 #define DSL_FIO_BSP_CMV_READ _IOWR(DSL_IOC_MEI_BSP_MAGIC, 15, DSL_DEV_MeiReg_t)
461 #define DSL_FIO_BSP_CMV_WRITE _IOW (DSL_IOC_MEI_BSP_MAGIC, 16, DSL_DEV_MeiReg_t)
462 #define DSL_FIO_BSP_DEBUG_READ _IOWR(DSL_IOC_MEI_BSP_MAGIC, 17, DSL_DEV_MeiDebug_t)
463 #define DSL_FIO_BSP_DEBUG_WRITE _IOWR(DSL_IOC_MEI_BSP_MAGIC, 18, DSL_DEV_MeiDebug_t)
464 #define DSL_FIO_BSP_GET_CHIP_INFO _IOR (DSL_IOC_MEI_BSP_MAGIC, 19, DSL_DEV_HwVersion_t)
465
466 #define DSL_DEV_MEIDEBUG_BUFFER_SIZES 512
467
468 typedef struct DSL_DEV_MeiDebug
469 {
470 DSL_uint32_t iAddress;
471 DSL_uint32_t iCount;
472 DSL_uint32_t buffer[DSL_DEV_MEIDEBUG_BUFFER_SIZES];
473 } DSL_DEV_MeiDebug_t; /* meidebug */
474
475 /**
476 * Structure is used for debug access only.
477 * Refer to configure option INCLUDE_ADSL_WINHOST_DEBUG */
478 typedef struct struct_meireg
479 {
480 /*
481 * Specifies that address for debug access */
482 unsigned long iAddress;
483 /*
484 * Specifies the pointer to the data that has to be written or returns a
485 * pointer to the data that has been read out*/
486 unsigned long iData;
487 } DSL_DEV_MeiReg_t; /* meireg */
488
489 typedef struct DSL_DEV_Device
490 {
491 DSL_int_t nInUse; /* modem state, update by bsp driver, */
492 DSL_void_t *pPriv;
493 DSL_uint32_t base_address; /* mei base address */
494 DSL_int_t nIrq[2]; /* irq number */
495 #define IFX_DFEIR 0
496 #define IFX_DYING_GASP 1
497 DSL_DEV_MeiDebug_t lop_debugwr; /* dying gasp */
498 #if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0))
499 struct module *owner;
500 #endif
501 } DSL_DEV_Device_t; /* ifx_adsl_device_t */
502
503 #define DSL_DEV_PRIVATE(dev) ((ifx_mei_device_private_t*)(dev->pPriv))
504
505 typedef struct DSL_DEV_Version /* ifx_adsl_bsp_version */
506 {
507 unsigned long major;
508 unsigned long minor;
509 unsigned long revision;
510 } DSL_DEV_Version_t; /* ifx_adsl_bsp_version_t */
511
512 typedef struct DSL_DEV_ChipInfo
513 {
514 unsigned long major;
515 unsigned long minor;
516 } DSL_DEV_HwVersion_t;
517
518 typedef struct
519 {
520 DSL_uint8_t dummy;
521 } DSL_DEV_DeviceConfig_t;
522
523 /** error code definitions */
524 typedef enum DSL_DEV_MeiError
525 {
526 DSL_DEV_MEI_ERR_SUCCESS = 0,
527 DSL_DEV_MEI_ERR_FAILURE = -1,
528 DSL_DEV_MEI_ERR_MAILBOX_FULL = -2,
529 DSL_DEV_MEI_ERR_MAILBOX_EMPTY = -3,
530 DSL_DEV_MEI_ERR_MAILBOX_TIMEOUT = -4
531 } DSL_DEV_MeiError_t; /* MEI_ERROR */
532
533 typedef enum {
534 DSL_BSP_MEMORY_READ=0,
535 DSL_BSP_MEMORY_WRITE,
536 } DSL_BSP_MemoryAccessType_t; /* ifx_adsl_memory_access_type_t */
537
538 typedef enum
539 {
540 DSL_LED_LINK_ID=0,
541 DSL_LED_DATA_ID
542 } DSL_DEV_LedId_t; /* ifx_adsl_led_id_t */
543
544 typedef enum
545 {
546 DSL_LED_LINK_TYPE=0,
547 DSL_LED_DATA_TYPE
548 } DSL_DEV_LedType_t; /* ifx_adsl_led_type_t */
549
550 typedef enum
551 {
552 DSL_LED_HD_CPU=0,
553 DSL_LED_HD_FW
554 } DSL_DEV_LedHandler_t; /* ifx_adsl_led_handler_t */
555
556 typedef enum {
557 DSL_LED_ON=0,
558 DSL_LED_OFF,
559 DSL_LED_FLASH,
560 } DSL_DEV_LedMode_t; /* ifx_adsl_led_mode_t */
561
562 typedef enum {
563 DSL_CPU_HALT=0,
564 DSL_CPU_RUN,
565 DSL_CPU_RESET,
566 } DSL_DEV_CpuMode_t; /* ifx_adsl_cpu_mode_t */
567
568 #if 0
569 typedef enum {
570 DSL_BSP_EVENT_DYING_GASP = 0,
571 DSL_BSP_EVENT_CEOC_IRQ,
572 } DSL_BSP_Event_id_t; /* ifx_adsl_event_id_t */
573
574 typedef union DSL_BSP_CB_Param
575 {
576 DSL_uint32_t nIrqMessage;
577 } DSL_BSP_CB_Param_t; /* ifx_adsl_cbparam_t */
578
579 typedef struct DSL_BSP_CB_Event
580 {
581 DSL_BSP_Event_id_t nID;
582 DSL_DEV_Device_t *pDev;
583 DSL_BSP_CB_Param_t *pParam;
584 } DSL_BSP_CB_Event_t; /* ifx_adsl_cb_event_t */
585 #endif
586
587 /* external functions (from the BSP Driver) */
588 extern DSL_DEV_Device_t* DSL_BSP_DriverHandleGet(int, int);
589 extern DSL_int_t DSL_BSP_DriverHandleDelete(DSL_DEV_Device_t *);
590 extern DSL_DEV_MeiError_t DSL_BSP_FWDownload(DSL_DEV_Device_t *, const DSL_char_t *, DSL_uint32_t, DSL_int32_t *, DSL_int32_t *);
591 extern int DSL_BSP_KernelIoctls(DSL_DEV_Device_t *, unsigned int, unsigned long);
592 extern DSL_DEV_MeiError_t DSL_BSP_SendCMV(DSL_DEV_Device_t *, DSL_uint16_t *, DSL_int_t, DSL_uint16_t *);
593 extern DSL_DEV_MeiError_t DSL_BSP_AdslLedInit(DSL_DEV_Device_t *, DSL_DEV_LedId_t, DSL_DEV_LedType_t, DSL_DEV_LedHandler_t);
594 extern DSL_DEV_MeiError_t DSL_BSP_Showtime(DSL_DEV_Device_t *, DSL_uint32_t, DSL_uint32_t);
595 extern int DSL_BSP_ATMLedCBRegister( int (*ifx_adsl_ledcallback)(void));
596 extern DSL_DEV_MeiError_t DSL_BSP_MemoryDebugAccess(DSL_DEV_Device_t *, DSL_BSP_MemoryAccessType_t, DSL_uint32_t, DSL_uint32_t *, DSL_uint32_t);
597 extern volatile DSL_DEV_Device_t *adsl_dev;
598
599 /**
600 * Dummy structure by now to show mechanism of extended data that will be
601 * provided within event callback itself.
602 * */
603 typedef struct
604 {
605 /**
606 * Dummy value */
607 DSL_uint32_t nDummy1;
608 } DSL_BSP_CB_Event1DataDummy_t;
609
610 /**
611 * Dummy structure by now to show mechanism of extended data that will be
612 * provided within event callback itself.
613 * */
614 typedef struct
615 {
616 /**
617 * Dummy value */
618 DSL_uint32_t nDummy2;
619 } DSL_BSP_CB_Event2DataDummy_t;
620
621 /**
622 * encapsulate all data structures that are necessary for status event
623 * callbacks.
624 * */
625 typedef union
626 {
627 DSL_BSP_CB_Event1DataDummy_t dataEvent1;
628 DSL_BSP_CB_Event2DataDummy_t dataEvent2;
629 } DSL_BSP_CB_DATA_Union_t;
630
631
632 typedef enum
633 {
634 /**
635 * Informs the upper layer driver (DSL CPE API) about a reboot request from the
636 * firmware.
637 * \note This event does NOT include any additional data.
638 * More detailed information upon reboot reason has to be requested from
639 * upper layer software via CMV (INFO 109) if necessary. */
640 DSL_BSP_CB_FIRST = 0,
641 DSL_BSP_CB_DYING_GASP,
642 DSL_BSP_CB_CEOC_IRQ,
643 DSL_BSP_CB_FIRMWARE_REBOOT,
644 /**
645 * Delimiter only */
646 DSL_BSP_CB_LAST
647 } DSL_BSP_CB_Type_t;
648
649 /**
650 * Specifies the common event type that has to be used for registering and
651 * signalling of interrupts/autonomous status events from MEI BSP Driver.
652 *
653 * \param pDev
654 * Context pointer from MEI BSP Driver.
655 *
656 * \param IFX_ADSL_BSP_CallbackType_t
657 * Specifies the event callback type (reason of callback). Regrading to the
658 * setting of this value the data which is included in the following union
659 * might have different meanings.
660 * Please refer to the description of the union to get information about the
661 * meaning of the included data.
662 *
663 * \param pData
664 * Data according to \ref DSL_BSP_CB_DATA_Union_t.
665 * If this pointer is NULL there is no additional data available.
666 *
667 * \return depending on event
668 */
669 typedef int (*DSL_BSP_EventCallback_t)
670 (
671 DSL_DEV_Device_t *pDev,
672 DSL_BSP_CB_Type_t nCallbackType,
673 DSL_BSP_CB_DATA_Union_t *pData
674 );
675
676 typedef struct {
677 DSL_BSP_EventCallback_t function;
678 DSL_BSP_CB_Type_t event;
679 DSL_BSP_CB_DATA_Union_t *pData;
680 } DSL_BSP_EventCallBack_t;
681
682 extern int DSL_BSP_EventCBRegister(DSL_BSP_EventCallBack_t *);
683 extern int DSL_BSP_EventCBUnregister(DSL_BSP_EventCallBack_t *);
684
685 /** Modem states */
686 #define DSL_DEV_STAT_InitState 0x0000
687 #define DSL_DEV_STAT_ReadyState 0x0001
688 #define DSL_DEV_STAT_FailState 0x0002
689 #define DSL_DEV_STAT_IdleState 0x0003
690 #define DSL_DEV_STAT_QuietState 0x0004
691 #define DSL_DEV_STAT_GhsState 0x0005
692 #define DSL_DEV_STAT_FullInitState 0x0006
693 #define DSL_DEV_STAT_ShowTimeState 0x0007
694 #define DSL_DEV_STAT_FastRetrainState 0x0008
695 #define DSL_DEV_STAT_LoopDiagMode 0x0009
696 #define DSL_DEV_STAT_ShortInit 0x000A /* Bis short initialization */
697
698 #define DSL_DEV_STAT_CODESWAP_COMPLETE 0x0002
699
700 #endif //IFXMIPS_MEI_H
This page took 0.069364 seconds and 5 git commands to generate.