ar71xx: don't use vlan 0 for devices with rtl8366s switch
[openwrt.git] / package / ep80579-drivers / patches / 100-iegbe_netdev_ops.patch
1 --- a/Embedded/src/GbE/iegbe_main.c
2 +++ b/Embedded/src/GbE/iegbe_main.c
3 @@ -724,6 +724,26 @@ static void iegbe_dump_eeprom(struct ieg
4 kfree(data);
5 }
6
7 +static const struct net_device_ops iegbe_netdev_ops = {
8 + .ndo_open = iegbe_open,
9 + .ndo_stop = iegbe_close,
10 + .ndo_start_xmit = iegbe_xmit_frame,
11 + .ndo_get_stats = iegbe_get_stats,
12 + .ndo_set_rx_mode = iegbe_set_rx_mode,
13 + .ndo_set_mac_address = iegbe_set_mac,
14 + .ndo_tx_timeout = iegbe_tx_timeout,
15 + .ndo_change_mtu = iegbe_change_mtu,
16 + .ndo_do_ioctl = iegbe_ioctl,
17 + .ndo_validate_addr = eth_validate_addr,
18 +
19 + .ndo_vlan_rx_register = iegbe_vlan_rx_register,
20 + .ndo_vlan_rx_add_vid = iegbe_vlan_rx_add_vid,
21 + .ndo_vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid,
22 +#ifdef CONFIG_NET_POLL_CONTROLLER
23 + .ndo_poll_controller = iegbe_netpoll,
24 +#endif
25 +};
26 +
27 /**
28 * iegbe_probe - Device Initialization Routine
29 * @pdev: PCI device information struct
30 @@ -800,24 +820,11 @@ static int __devinit iegbe_probe(struct
31 if (!hw->hw_addr)
32 goto err_ioremap;
33
34 - netdev->open = &iegbe_open;
35 - netdev->stop = &iegbe_close;
36 - netdev->hard_start_xmit = &iegbe_xmit_frame;
37 - netdev->get_stats = &iegbe_get_stats;
38 - netdev->set_rx_mode = &iegbe_set_rx_mode;
39 - netdev->set_mac_address = &iegbe_set_mac;
40 - netdev->change_mtu = &iegbe_change_mtu;
41 - netdev->do_ioctl = &iegbe_ioctl;
42 + netdev->netdev_ops = &iegbe_netdev_ops;
43 set_ethtool_ops(netdev);
44 - netdev->tx_timeout = &iegbe_tx_timeout;
45 netdev->watchdog_timeo = 5 * HZ;
46 netif_napi_add(netdev, &adapter->napi, iegbe_clean, 64);
47 - netdev->vlan_rx_register = iegbe_vlan_rx_register;
48 - netdev->vlan_rx_add_vid = iegbe_vlan_rx_add_vid;
49 - netdev->vlan_rx_kill_vid = iegbe_vlan_rx_kill_vid;
50 -#ifdef CONFIG_NET_POLL_CONTROLLER
51 - netdev->poll_controller = iegbe_netpoll;
52 -#endif
53 +
54 strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
55
56
This page took 0.054269 seconds and 5 git commands to generate.