[kernel] modules/gpio-buttons: fix build error on older kernels
[openwrt.git] / target / linux / generic-2.6 / files / drivers / ssb / scan.c
1 /*
2 * Sonics Silicon Backplane
3 * Bus scanning
4 *
5 * Copyright (C) 2005-2007 Michael Buesch <mb@bu3sch.de>
6 * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de>
7 * Copyright (C) 2005 Stefano Brivio <st3@riseup.net>
8 * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org>
9 * Copyright (C) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
10 * Copyright (C) 2006 Broadcom Corporation.
11 *
12 * Licensed under the GNU/GPL. See COPYING for details.
13 */
14
15 #include <linux/ssb/ssb.h>
16 #include <linux/ssb/ssb_regs.h>
17 #include <linux/pci.h>
18 #include <linux/io.h>
19
20 #include <pcmcia/cs_types.h>
21 #include <pcmcia/cs.h>
22 #include <pcmcia/cistpl.h>
23 #include <pcmcia/ds.h>
24
25 #include "ssb_private.h"
26
27
28 const char *ssb_core_name(u16 coreid)
29 {
30 switch (coreid) {
31 case SSB_DEV_CHIPCOMMON:
32 return "ChipCommon";
33 case SSB_DEV_ILINE20:
34 return "ILine 20";
35 case SSB_DEV_SDRAM:
36 return "SDRAM";
37 case SSB_DEV_PCI:
38 return "PCI";
39 case SSB_DEV_MIPS:
40 return "MIPS";
41 case SSB_DEV_ETHERNET:
42 return "Fast Ethernet";
43 case SSB_DEV_V90:
44 return "V90";
45 case SSB_DEV_USB11_HOSTDEV:
46 return "USB 1.1 Hostdev";
47 case SSB_DEV_ADSL:
48 return "ADSL";
49 case SSB_DEV_ILINE100:
50 return "ILine 100";
51 case SSB_DEV_IPSEC:
52 return "IPSEC";
53 case SSB_DEV_PCMCIA:
54 return "PCMCIA";
55 case SSB_DEV_INTERNAL_MEM:
56 return "Internal Memory";
57 case SSB_DEV_MEMC_SDRAM:
58 return "MEMC SDRAM";
59 case SSB_DEV_EXTIF:
60 return "EXTIF";
61 case SSB_DEV_80211:
62 return "IEEE 802.11";
63 case SSB_DEV_MIPS_3302:
64 return "MIPS 3302";
65 case SSB_DEV_USB11_HOST:
66 return "USB 1.1 Host";
67 case SSB_DEV_USB11_DEV:
68 return "USB 1.1 Device";
69 case SSB_DEV_USB20_HOST:
70 return "USB 2.0 Host";
71 case SSB_DEV_USB20_DEV:
72 return "USB 2.0 Device";
73 case SSB_DEV_SDIO_HOST:
74 return "SDIO Host";
75 case SSB_DEV_ROBOSWITCH:
76 return "Roboswitch";
77 case SSB_DEV_PARA_ATA:
78 return "PATA";
79 case SSB_DEV_SATA_XORDMA:
80 return "SATA XOR-DMA";
81 case SSB_DEV_ETHERNET_GBIT:
82 return "GBit Ethernet";
83 case SSB_DEV_PCIE:
84 return "PCI-E";
85 case SSB_DEV_MIMO_PHY:
86 return "MIMO PHY";
87 case SSB_DEV_SRAM_CTRLR:
88 return "SRAM Controller";
89 case SSB_DEV_MINI_MACPHY:
90 return "Mini MACPHY";
91 case SSB_DEV_ARM_1176:
92 return "ARM 1176";
93 case SSB_DEV_ARM_7TDMI:
94 return "ARM 7TDMI";
95 }
96 return "UNKNOWN";
97 }
98
99 static u16 pcidev_to_chipid(struct pci_dev *pci_dev)
100 {
101 u16 chipid_fallback = 0;
102
103 switch (pci_dev->device) {
104 case 0x4301:
105 chipid_fallback = 0x4301;
106 break;
107 case 0x4305 ... 0x4307:
108 chipid_fallback = 0x4307;
109 break;
110 case 0x4403:
111 chipid_fallback = 0x4402;
112 break;
113 case 0x4610 ... 0x4615:
114 chipid_fallback = 0x4610;
115 break;
116 case 0x4710 ... 0x4715:
117 chipid_fallback = 0x4710;
118 break;
119 case 0x4320 ... 0x4325:
120 chipid_fallback = 0x4309;
121 break;
122 case PCI_DEVICE_ID_BCM4401:
123 case PCI_DEVICE_ID_BCM4401B0:
124 case PCI_DEVICE_ID_BCM4401B1:
125 chipid_fallback = 0x4401;
126 break;
127 default:
128 ssb_printk(KERN_ERR PFX
129 "PCI-ID not in fallback list\n");
130 }
131
132 return chipid_fallback;
133 }
134
135 static u8 chipid_to_nrcores(u16 chipid)
136 {
137 switch (chipid) {
138 case 0x5365:
139 return 7;
140 case 0x4306:
141 return 6;
142 case 0x4310:
143 return 8;
144 case 0x4307:
145 case 0x4301:
146 return 5;
147 case 0x4401:
148 case 0x4402:
149 return 3;
150 case 0x4710:
151 case 0x4610:
152 case 0x4704:
153 return 9;
154 default:
155 ssb_printk(KERN_ERR PFX
156 "CHIPID not in nrcores fallback list\n");
157 }
158
159 return 1;
160 }
161
162 static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx,
163 u16 offset)
164 {
165 switch (bus->bustype) {
166 case SSB_BUSTYPE_SSB:
167 offset += current_coreidx * SSB_CORE_SIZE;
168 break;
169 case SSB_BUSTYPE_PCI:
170 break;
171 case SSB_BUSTYPE_PCMCIA:
172 if (offset >= 0x800) {
173 ssb_pcmcia_switch_segment(bus, 1);
174 offset -= 0x800;
175 } else
176 ssb_pcmcia_switch_segment(bus, 0);
177 break;
178 }
179 return readl(bus->mmio + offset);
180 }
181
182 static int scan_switchcore(struct ssb_bus *bus, u8 coreidx)
183 {
184 switch (bus->bustype) {
185 case SSB_BUSTYPE_SSB:
186 break;
187 case SSB_BUSTYPE_PCI:
188 return ssb_pci_switch_coreidx(bus, coreidx);
189 case SSB_BUSTYPE_PCMCIA:
190 return ssb_pcmcia_switch_coreidx(bus, coreidx);
191 }
192 return 0;
193 }
194
195 void ssb_iounmap(struct ssb_bus *bus)
196 {
197 switch (bus->bustype) {
198 case SSB_BUSTYPE_SSB:
199 case SSB_BUSTYPE_PCMCIA:
200 iounmap(bus->mmio);
201 break;
202 case SSB_BUSTYPE_PCI:
203 #ifdef CONFIG_SSB_PCIHOST
204 pci_iounmap(bus->host_pci, bus->mmio);
205 #else
206 SSB_BUG_ON(1); /* Can't reach this code. */
207 #endif
208 break;
209 }
210 bus->mmio = NULL;
211 bus->mapped_device = NULL;
212 }
213
214 static void __iomem *ssb_ioremap(struct ssb_bus *bus,
215 unsigned long baseaddr)
216 {
217 void __iomem *mmio = NULL;
218
219 switch (bus->bustype) {
220 case SSB_BUSTYPE_SSB:
221 /* Only map the first core for now. */
222 /* fallthrough... */
223 case SSB_BUSTYPE_PCMCIA:
224 mmio = ioremap(baseaddr, SSB_CORE_SIZE);
225 break;
226 case SSB_BUSTYPE_PCI:
227 #ifdef CONFIG_SSB_PCIHOST
228 mmio = pci_iomap(bus->host_pci, 0, ~0UL);
229 #else
230 SSB_BUG_ON(1); /* Can't reach this code. */
231 #endif
232 break;
233 }
234
235 return mmio;
236 }
237
238 static int we_support_multiple_80211_cores(struct ssb_bus *bus)
239 {
240 /* More than one 802.11 core is only supported by special chips.
241 * There are chips with two 802.11 cores, but with dangling
242 * pins on the second core. Be careful and reject them here.
243 */
244
245 #ifdef CONFIG_SSB_PCIHOST
246 if (bus->bustype == SSB_BUSTYPE_PCI) {
247 if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM &&
248 bus->host_pci->device == 0x4324)
249 return 1;
250 }
251 #endif /* CONFIG_SSB_PCIHOST */
252 return 0;
253 }
254
255 int ssb_bus_scan(struct ssb_bus *bus,
256 unsigned long baseaddr)
257 {
258 int err = -ENOMEM;
259 void __iomem *mmio;
260 u32 idhi, cc, rev, tmp;
261 int dev_i, i;
262 struct ssb_device *dev;
263 int nr_80211_cores = 0;
264
265 mmio = ssb_ioremap(bus, baseaddr);
266 if (!mmio)
267 goto out;
268 bus->mmio = mmio;
269
270 err = scan_switchcore(bus, 0); /* Switch to first core */
271 if (err)
272 goto err_unmap;
273
274 idhi = scan_read32(bus, 0, SSB_IDHIGH);
275 cc = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT;
276 rev = (idhi & SSB_IDHIGH_RCLO);
277 rev |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT;
278
279 bus->nr_devices = 0;
280 if (cc == SSB_DEV_CHIPCOMMON) {
281 tmp = scan_read32(bus, 0, SSB_CHIPCO_CHIPID);
282
283 bus->chip_id = (tmp & SSB_CHIPCO_IDMASK);
284 bus->chip_rev = (tmp & SSB_CHIPCO_REVMASK) >>
285 SSB_CHIPCO_REVSHIFT;
286 bus->chip_package = (tmp & SSB_CHIPCO_PACKMASK) >>
287 SSB_CHIPCO_PACKSHIFT;
288 if (rev >= 4) {
289 bus->nr_devices = (tmp & SSB_CHIPCO_NRCORESMASK) >>
290 SSB_CHIPCO_NRCORESSHIFT;
291 }
292 tmp = scan_read32(bus, 0, SSB_CHIPCO_CAP);
293 bus->chipco.capabilities = tmp;
294 } else {
295 if (bus->bustype == SSB_BUSTYPE_PCI) {
296 bus->chip_id = pcidev_to_chipid(bus->host_pci);
297 pci_read_config_word(bus->host_pci, PCI_REVISION_ID,
298 &bus->chip_rev);
299 bus->chip_package = 0;
300 } else {
301 bus->chip_id = 0x4710;
302 bus->chip_rev = 0;
303 bus->chip_package = 0;
304 }
305 }
306 if (!bus->nr_devices)
307 bus->nr_devices = chipid_to_nrcores(bus->chip_id);
308 if (bus->nr_devices > ARRAY_SIZE(bus->devices)) {
309 ssb_printk(KERN_ERR PFX
310 "More than %d ssb cores found (%d)\n",
311 SSB_MAX_NR_CORES, bus->nr_devices);
312 goto err_unmap;
313 }
314 if (bus->bustype == SSB_BUSTYPE_SSB) {
315 /* Now that we know the number of cores,
316 * remap the whole IO space for all cores.
317 */
318 err = -ENOMEM;
319 iounmap(mmio);
320 mmio = ioremap(baseaddr, SSB_CORE_SIZE * bus->nr_devices);
321 if (!mmio)
322 goto out;
323 bus->mmio = mmio;
324 }
325
326 /* Fetch basic information about each core/device */
327 for (i = 0, dev_i = 0; i < bus->nr_devices; i++) {
328 err = scan_switchcore(bus, i);
329 if (err)
330 goto err_unmap;
331 dev = &(bus->devices[dev_i]);
332
333 idhi = scan_read32(bus, i, SSB_IDHIGH);
334 dev->id.coreid = (idhi & SSB_IDHIGH_CC) >> SSB_IDHIGH_CC_SHIFT;
335 dev->id.revision = (idhi & SSB_IDHIGH_RCLO);
336 dev->id.revision |= (idhi & SSB_IDHIGH_RCHI) >> SSB_IDHIGH_RCHI_SHIFT;
337 dev->id.vendor = (idhi & SSB_IDHIGH_VC) >> SSB_IDHIGH_VC_SHIFT;
338 dev->core_index = i;
339 dev->bus = bus;
340 dev->ops = bus->ops;
341
342 ssb_dprintk(KERN_INFO PFX
343 "Core %d found: %s "
344 "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n",
345 i, ssb_core_name(dev->id.coreid),
346 dev->id.coreid, dev->id.revision, dev->id.vendor);
347
348 switch (dev->id.coreid) {
349 case SSB_DEV_80211:
350 nr_80211_cores++;
351 if (nr_80211_cores > 1) {
352 if (!we_support_multiple_80211_cores(bus)) {
353 ssb_dprintk(KERN_INFO PFX "Ignoring additional "
354 "802.11 core\n");
355 continue;
356 }
357 }
358 break;
359 case SSB_DEV_EXTIF:
360 #ifdef CONFIG_SSB_DRIVER_EXTIF
361 if (bus->extif.dev) {
362 ssb_printk(KERN_WARNING PFX
363 "WARNING: Multiple EXTIFs found\n");
364 break;
365 }
366 bus->extif.dev = dev;
367 #endif /* CONFIG_SSB_DRIVER_EXTIF */
368 break;
369 case SSB_DEV_CHIPCOMMON:
370 if (bus->chipco.dev) {
371 ssb_printk(KERN_WARNING PFX
372 "WARNING: Multiple ChipCommon found\n");
373 break;
374 }
375 bus->chipco.dev = dev;
376 break;
377 case SSB_DEV_MIPS:
378 case SSB_DEV_MIPS_3302:
379 #ifdef CONFIG_SSB_DRIVER_MIPS
380 if (bus->mipscore.dev) {
381 ssb_printk(KERN_WARNING PFX
382 "WARNING: Multiple MIPS cores found\n");
383 break;
384 }
385 bus->mipscore.dev = dev;
386 #endif /* CONFIG_SSB_DRIVER_MIPS */
387 break;
388 case SSB_DEV_PCI:
389 case SSB_DEV_PCIE:
390 #ifdef CONFIG_SSB_DRIVER_PCICORE
391 if (bus->bustype == SSB_BUSTYPE_PCI) {
392 /* Ignore PCI cores on PCI-E cards.
393 * Ignore PCI-E cores on PCI cards. */
394 if (dev->id.coreid == SSB_DEV_PCI) {
395 if (bus->host_pci->is_pcie)
396 continue;
397 } else {
398 if (!bus->host_pci->is_pcie)
399 continue;
400 }
401 }
402 if (bus->pcicore.dev) {
403 ssb_printk(KERN_WARNING PFX
404 "WARNING: Multiple PCI(E) cores found\n");
405 break;
406 }
407 bus->pcicore.dev = dev;
408 #endif /* CONFIG_SSB_DRIVER_PCICORE */
409 break;
410 default:
411 break;
412 }
413
414 dev_i++;
415 }
416 bus->nr_devices = dev_i;
417
418 err = 0;
419 out:
420 return err;
421 err_unmap:
422 ssb_iounmap(bus);
423 goto out;
424 }
This page took 0.08809 seconds and 5 git commands to generate.