Remove packages when cleaning
[openwrt.git] / openwrt / scripts / flash.sh
1 #!/bin/bash
2
3 # flash script for linksys and asus routers
4 #
5 # Copyright (C) 2004 by Oleg I. Vdovikin <oleg@cs.msu.su>
6 # Copyright (C) 2005 by Waldemar Brodkorb <wbx@dass-it.de>
7 #
8 # This program is free software; you can redistribute it and/or modify
9 # it under the terms of the GNU General Public License as published by
10 # the Free Software Foundation; either version 2 of the License, or
11 # (at your option) any later version.
12 #
13 # This program is distributed in the hope that it will be useful,
14 # but WITHOUT ANY WARRANTY; without even the implied warranty of
15 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 # General Public License for more details.
17 #
18 # You should have received a copy of the GNU General Public License
19 # along with this program; if not, write to the Free Software
20 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
21 #
22
23 if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then
24 echo Usage: $0 firmware vendor
25 cat << EOF
26 IMPORTANT:
27 Notes for Linksys Routers:
28 be sure you have set boot_wait to yes. Power on your router
29 after executing this script.
30 Use openwrt-gs-code.bin or openwrt-g-code.bin as firmware.
31
32 Notes for Asus Routers:
33 be sure POWER led is flashing (If this is not a case
34 poweroff the device, push the reset button & power on
35 it again, then release button)
36 Use openwrt-linux.trx as firmware.
37
38 1) connect your pc to the LAN port
39 2) be sure your link is up and has an address in the
40 192.168.1.0/24 address range (and not the 192.168.1.1)
41 EOF
42 exit 0
43 fi
44 if [ "$2" == "asus" ]; then
45 echo Confirming IP address setting...
46 echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1
47 echo Flashing 192.168.1.1 using $1...
48 echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1
49 echo Please wait until leds stops flashing.
50 elif [ "$2" == "linksys" ]; then
51 echo Flashing 192.168.1.1 using $1...
52 echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1
53 echo Please wait until power led stops flashing. Then you can login via telnet 192.168.1.1
54 fi
This page took 0.045626 seconds and 5 git commands to generate.