package/acx-mac80211/patches/002-acx_vlynq.diff

   1 diff -Nru 1/acx_struct.h 2/acx_struct.h
   2 --- 1/acx_struct.h      2007-10-03 23:42:39.000000000 +0800
   3 +++ 2/acx_struct.h      2007-10-06 01:15:32.000000000 +0800
   4 @@ -1425,7 +1425,13 @@
   5
   6         const u16       *io;            /* points to ACX100 or ACX111 PCI I/O register address set */
   7
   8 +#ifdef CONFIG_PCI
   9         struct pci_dev  *pdev;
  10 +#endif
  11 +#ifdef CONFIG_VLYNQ
  12 +       struct vlynq_device     *vdev;
  13 +#endif
  14 +       struct device *bus_dev;
  15
  16         unsigned long   membase;
  17         unsigned long   membase2;
  18 diff -Nru 1/pci.c 2/pci.c
  19 --- 1/pci.c     2007-10-03 23:42:39.000000000 +0800
  20 +++ 2/pci.c     2007-10-06 01:15:32.000000000 +0800
  21 @@ -33,11 +33,15 @@
  22  #include <linux/ethtool.h>
  23  #include <linux/dma-mapping.h>
  24  #include <linux/workqueue.h>
  25 +#ifdef CONFIG_VLYNQ
  26 +#include <linux/vlynq.h>
  27 +#endif
  28
  29  #include "acx.h"
  30
  31  /***********************************************************************
  32  */
  33 +#ifdef CONFIG_PCI
  34  #define PCI_TYPE               (PCI_USES_MEM | PCI_ADDR0 | PCI_NO_ACPI_WAKE)
  35  #define PCI_ACX100_REGION1             0x01
  36  #define PCI_ACX100_REGION1_SIZE                0x1000  /* Memory size - 4K bytes */
  37 @@ -74,7 +78,7 @@
  38  #define PCI_UNKNOWN    5
  39  #define PCI_POWER_ERROR        -1
  40  #endif
  41 -
  42 +#endif /* CONFIG_PCI */
  43  /***********************************************************************
  44  */
  45
  46 @@ -87,12 +91,6 @@
  47  static void acxpci_s_up(struct ieee80211_hw *hw);
  48  static void acxpci_s_down(struct ieee80211_hw *hw);
  49
  50 -void acxpci_put_devname(acx_device_t *adev, struct ethtool_drvinfo *info)
  51 -{
  52 -
  53 -        strncpy(info->bus_info,pci_name(adev->pdev), ETHTOOL_BUSINFO_LEN);
  54 -}
  55 -
  56  /***********************************************************************
  57  ** Register access
  58  **
  59 @@ -605,12 +603,12 @@
  60         snprintf(filename, sizeof(filename), "tiacx1%02dc%02X",
  61                  IS_ACX111(adev) * 11, adev->radio_type);
  62
  63 -       fw_image = acx_s_read_fw(&adev->pdev->dev, filename, &file_size);
  64 +       fw_image = acx_s_read_fw(adev->bus_dev, filename, &file_size);
  65         if (!fw_image) {
  66                 adev->need_radio_fw = 1;
  67                 filename[sizeof("tiacx1NN") - 1] = '\0';
  68                 fw_image =
  69 -                   acx_s_read_fw(&adev->pdev->dev, filename, &file_size);
  70 +                   acx_s_read_fw(adev->bus_dev, filename, &file_size);
  71                 if (!fw_image) {
  72                         FN_EXIT1(NOT_OK);
  73                         return NOT_OK;
  74 @@ -670,7 +668,7 @@
  75
  76         snprintf(filename, sizeof(filename), "tiacx1%02dr%02X",
  77                  IS_ACX111(adev) * 11, adev->radio_type);
  78 -       radio_image = acx_s_read_fw(&adev->pdev->dev, filename, &size);
  79 +       radio_image = acx_s_read_fw(adev->bus_dev, filename, &size);
  80         if (!radio_image) {
  81                 printk("acx: can't load radio module '%s'\n", filename);
  82                 goto fail;
  83 @@ -886,7 +884,9 @@
  84
  85         acx_lock(adev, flags);
  86
  87 +#ifdef CONFIG_PCI
  88         acxpci_l_reset_mac(adev);
  89 +#endif
  90
  91         ecpu_ctrl = read_reg16(adev, IO_ACX_ECPU_CTRL) & 1;
  92         if (!ecpu_ctrl) {
  93 @@ -1426,6 +1426,7 @@
  94  };
  95
  96
  97 +#ifdef CONFIG_PCI
  98  static int __devinit
  99  acxpci_e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 100  {
 101 @@ -1477,6 +1478,7 @@
 102         /* acx_sem_lock(adev); */
 103         adev->ieee = ieee;
 104         adev->pdev = pdev;
 105 +       adev->bus_dev = &pdev->dev;
 106         adev->dev_type = DEVTYPE_PCI;
 107
 108  /** Finished with private interface **/
 109 @@ -1916,7 +1918,7 @@
 110         return OK;
 111  }
 112  #endif /* CONFIG_PM */
 113 -
 114 +#endif /* CONFIG_PCI */
 115
 116  /***********************************************************************
 117  ** acxpci_s_up
 118 @@ -1998,7 +2000,7 @@
 119         /* then wait until interrupts have finished executing on other CPUs */
 120         acx_lock(adev, flags);
 121         disable_acx_irq(adev);
 122 -        synchronize_irq(adev->pdev->irq);
 123 +        synchronize_irq(adev->irq);
 124         acx_unlock(adev, flags);
 125
 126         /* we really don't want to have an asynchronous tasklet disturb us
 127 @@ -3449,8 +3451,7 @@
 128  {
 129         void *ptr;
 130
 131 -       ptr = dma_alloc_coherent(adev->pdev ? &adev->pdev->dev : NULL,
 132 -                                size, phy, GFP_KERNEL);
 133 +       ptr = dma_alloc_coherent(adev->bus_dev, size, phy, GFP_KERNEL);
 134
 135         if (ptr) {
 136                 log(L_DEBUG, "%s sz=%d adr=0x%p phy=0x%08llx\n",
 137 @@ -4016,10 +4017,370 @@
 138         return OK;
 139  }
 140
 141 +#ifdef CONFIG_VLYNQ
 142 +struct vlynq_reg_config {
 143 +       u32 offset;
 144 +       u32 value;
 145 +};
 146 +
 147 +struct vlynq_known {
 148 +       u32 chip_id;
 149 +       char name[32];
 150 +       struct vlynq_mapping rx_mapping[4];
 151 +       int irq;
 152 +       int irq_type;
 153 +       int num_regs;
 154 +       struct vlynq_reg_config regs[10];
 155 +};
 156 +
 157 +#define CHIP_TNETW1130 0x00000009
 158 +#define CHIP_TNETW1350 0x00000029
 159 +
 160 +static struct vlynq_known known_devices[] = {
 161 +       {
 162 +               .chip_id = CHIP_TNETW1130, .name = "TI TNETW1130",
 163 +               .rx_mapping = {
 164 +                       { .size = 0x22000, .offset = 0xf0000000 },
 165 +                       { .size = 0x40000, .offset = 0xc0000000 },
 166 +                       { .size = 0x0, .offset = 0x0 },
 167 +                       { .size = 0x0, .offset = 0x0 },
 168 +               },
 169 +               .irq = 0,
 170 +               .irq_type = IRQ_TYPE_EDGE_RISING,
 171 +               .num_regs = 5,
 172 +               .regs = {
 173 +                       {
 174 +                               .offset = 0x790,
 175 +                               .value = (0xd0000000 - PHYS_OFFSET)
 176 +                       },
 177 +                       {
 178 +                               .offset = 0x794,
 179 +                               .value = (0xd0000000 - PHYS_OFFSET)
 180 +                       },
 181 +                       { .offset = 0x740, .value = 0 },
 182 +                       { .offset = 0x744, .value = 0x00010000 },
 183 +                       { .offset = 0x764, .value = 0x00010000 },
 184 +               },
 185 +       },
 186 +       {
 187 +               .chip_id = CHIP_TNETW1350, .name = "TI TNETW1350",
 188 +               .rx_mapping = {
 189 +                       { .size = 0x100000, .offset = 0x00300000 },
 190 +                       { .size = 0x80000, .offset = 0x00000000 },
 191 +                       { .size = 0x0, .offset = 0x0 },
 192 +                       { .size = 0x0, .offset = 0x0 },
 193 +               },
 194 +               .irq = 0,
 195 +               .irq_type = IRQ_TYPE_EDGE_RISING,
 196 +               .num_regs = 5,
 197 +               .regs = {
 198 +                       {
 199 +                               .offset = 0x790,
 200 +                               .value = (0x60000000 - PHYS_OFFSET)
 201 +                       },
 202 +                       {
 203 +                               .offset = 0x794,
 204 +                               .value = (0x60000000 - PHYS_OFFSET)
 205 +                       },
 206 +                       { .offset = 0x740, .value = 0 },
 207 +                       { .offset = 0x744, .value = 0x00010000 },
 208 +                       { .offset = 0x764, .value = 0x00010000 },
 209 +               },
 210 +       },
 211 +};
 212 +
 213 +static struct vlynq_device_id acx_vlynq_id[] = {
 214 +       { CHIP_TNETW1130, vlynq_div_auto, 0 },
 215 +       { CHIP_TNETW1350, vlynq_div_auto, 1 },
 216 +       { 0, 0, 0 },
 217 +};
 218 +
 219 +static __devinit int vlynq_probe(struct vlynq_device *vdev,
 220 +                                struct vlynq_device_id *id)
 221 +{
 222 +       int result = -EIO, i;
 223 +       u32 addr;
 224 +       struct ieee80211_hw *ieee;
 225 +       acx_device_t *adev = NULL;
 226 +       acx111_ie_configoption_t co;
 227 +       struct vlynq_mapping mapping[4] = { { 0, }, };
 228 +       struct vlynq_known *match = NULL;
 229 +
 230 +       FN_ENTER;
 231 +       result = vlynq_enable_device(vdev);
 232 +       if (result)
 233 +               return result;
 234 +
 235 +       match = &known_devices[id->driver_data];
 236 +
 237 +       if (!match) {
 238 +               result = -ENODEV;
 239 +               goto fail;
 240 +       }
 241 +
 242 +       mapping[0].offset = ARCH_PFN_OFFSET << PAGE_SHIFT;
 243 +       mapping[0].size = 0x02000000;
 244 +       vlynq_set_local_mapping(vdev, vdev->mem_start, mapping);
 245 +       vlynq_set_remote_mapping(vdev, 0, match->rx_mapping);
 246 +
 247 +       set_irq_type(vlynq_virq_to_irq(vdev, match->irq), match->irq_type);
 248 +
 249 +       addr = (u32)ioremap(vdev->mem_start, 0x1000);
 250 +       if (!addr) {
 251 +               printk(KERN_ERR "%s: failed to remap io memory\n",
 252 +                      vdev->dev.bus_id);
 253 +               result = -ENXIO;
 254 +               goto fail;
 255 +       }
 256 +
 257 +       for (i = 0; i < match->num_regs; i++)
 258 +               iowrite32(match->regs[i].value,
 259 +                         (u32 *)(addr + match->regs[i].offset));
 260 +
 261 +       iounmap((void *)addr);
 262 +
 263 +       ieee = ieee80211_alloc_hw(sizeof(struct acx_device), &acxpci_hw_ops);
 264 +       if (!ieee) {
 265 +               printk("acx: could not allocate ieee80211 structure %s\n",
 266 +                      vdev->dev.bus_id);
 267 +               goto fail_alloc_netdev;
 268 +       }
 269 +       ieee->flags &=   (~IEEE80211_HW_RX_INCLUDES_FCS &
 270 +                         ~IEEE80211_HW_MONITOR_DURING_OPER) |
 271 +                        IEEE80211_HW_WEP_INCLUDE_IV;
 272 +       ieee->queues = 1;
 273 +
 274 +       adev = ieee2adev(ieee);
 275 +
 276 +       memset(adev, 0, sizeof(*adev));
 277 +       /** Set up our private interface **/
 278 +       spin_lock_init(&adev->lock);    /* initial state: unlocked */
 279 +       /* We do not start with downed sem: we want PARANOID_LOCKING to work */
 280 +       mutex_init(&adev->mutex);
 281 +       /* since nobody can see new netdev yet, we can as well
 282 +        ** just _presume_ that we're under sem (instead of actually taking it): */
 283 +       /* acx_sem_lock(adev); */
 284 +       adev->ieee = ieee;
 285 +       adev->vdev = vdev;
 286 +       adev->bus_dev = &vdev->dev;
 287 +       adev->dev_type = DEVTYPE_PCI;
 288 +
 289 +/** Finished with private interface **/
 290 +
 291 +       vlynq_set_drvdata(vdev, ieee);
 292 +       if (!request_mem_region(vdev->mem_start, vdev->mem_end - vdev->mem_start, "acx")) {
 293 +               printk("acx: cannot reserve VLYNQ memory region\n");
 294 +               goto fail_request_mem_region;
 295 +       }
 296 +       adev->iobase = ioremap(vdev->mem_start, vdev->mem_end - vdev->mem_start);
 297 +       if (!adev->iobase) {
 298 +               printk("acx: ioremap() FAILED\n");
 299 +               goto fail_ioremap;
 300 +       }
 301 +       adev->iobase2 = adev->iobase + match->rx_mapping[0].size;
 302 +       adev->chip_type = CHIPTYPE_ACX111;
 303 +       adev->chip_name = match->name;
 304 +       adev->io = IO_ACX111;
 305 +       adev->irq = vlynq_virq_to_irq(vdev, match->irq);
 306 +
 307 +       printk("acx: found %s-based wireless network card at %s, irq:%d, "
 308 +              "phymem:0x%x, mem:0x%p\n",
 309 +              match->name, vdev->dev.bus_id, adev->irq,
 310 +              vdev->mem_start, adev->iobase);
 311 +       log(L_ANY, "initial debug setting is 0x%04X\n", acx_debug);
 312 +
 313 +       if (0 == adev->irq) {
 314 +               printk("acx: can't use IRQ 0\n");
 315 +               goto fail_irq;
 316 +       }
 317 +       SET_IEEE80211_DEV(ieee, &vdev->dev);
 318 +
 319 +
 320 +       /* to find crashes due to weird driver access
 321 +        * to unconfigured interface (ifup) */
 322 +       adev->mgmt_timer.function = (void (*)(unsigned long))0x0000dead;
 323 +
 324 +
 325 +       /* ok, pci setup is finished, now start initializing the card */
 326 +
 327 +       /* NB: read_reg() reads may return bogus data before reset_dev(),
 328 +        * since the firmware which directly controls large parts of the I/O
 329 +        * registers isn't initialized yet.
 330 +        * acx100 seems to be more affected than acx111 */
 331 +       if (OK != acxpci_s_reset_dev(adev))
 332 +               goto fail_reset;
 333 +
 334 +       if (OK != acx_s_init_mac(adev))
 335 +               goto fail_init_mac;
 336 +
 337 +       acx_s_interrogate(adev, &co, ACX111_IE_CONFIG_OPTIONS);
 338 +/* TODO: merge them into one function, they are called just once and are the same for pci & usb */
 339 +       if (OK != acxpci_read_eeprom_byte(adev, 0x05, &adev->eeprom_version))
 340 +               goto fail_read_eeprom_version;
 341 +
 342 +       acx_s_parse_configoption(adev, &co);
 343 +       acx_s_set_defaults(adev);
 344 +       acx_s_get_firmware_version(adev);       /* needs to be after acx_s_init_mac() */
 345 +       acx_display_hardware_details(adev);
 346 +
 347 +       /* Register the card, AFTER everything else has been set up,
 348 +        * since otherwise an ioctl could step on our feet due to
 349 +        * firmware operations happening in parallel or uninitialized data */
 350 +
 351 +
 352 +       acx_proc_register_entries(ieee);
 353 +
 354 +       /* Now we have our device, so make sure the kernel doesn't try
 355 +        * to send packets even though we're not associated to a network yet */
 356 +
 357 +       /* after register_netdev() userspace may start working with dev
 358 +        * (in particular, on other CPUs), we only need to up the sem */
 359 +       /* acx_sem_unlock(adev); */
 360 +
 361 +       printk("acx " ACX_RELEASE ": net device %s, driver compiled "
 362 +              "against wireless extensions %d and Linux %s\n",
 363 +              wiphy_name(adev->ieee->wiphy), WIRELESS_EXT, UTS_RELEASE);
 364 +
 365 +       MAC_COPY(adev->ieee->wiphy->perm_addr, adev->dev_addr);
 366 +
 367 +       log(L_IRQ | L_INIT, "using IRQ %d\n", adev->irq);
 368 +
 369 +/** done with board specific setup **/
 370 +
 371 +       acx_init_task_scheduler(adev);
 372 +       result = ieee80211_register_hw(adev->ieee);
 373 +       if (OK != result) {
 374 +               printk("acx: ieee80211_register_hw() FAILED: %d\n", result);
 375 +               goto fail_register_netdev;
 376 +       }
 377 +#if CMD_DISCOVERY
 378 +       great_inquisitor(adev);
 379 +#endif
 380 +
 381 +       result = OK;
 382 +       goto done;
 383 +
 384 +       /* error paths: undo everything in reverse order... */
 385 +
 386 +
 387 +       acxpci_s_delete_dma_regions(adev);
 388 +
 389 +      fail_init_mac:
 390 +      fail_read_eeprom_version:
 391 +      fail_reset:
 392 +
 393 +      fail_alloc_netdev:
 394 +      fail_irq:
 395 +
 396 +       iounmap(adev->iobase);
 397 +      fail_ioremap:
 398 +
 399 +       release_mem_region(vdev->mem_start, vdev->mem_end - vdev->mem_start);
 400 +      fail_request_mem_region:
 401 +      fail_register_netdev:
 402 +       ieee80211_free_hw(ieee);
 403 +      fail:
 404 +       vlynq_disable_device(vdev);
 405 +      done:
 406 +       FN_EXIT1(result);
 407 +       return result;
 408 +}
 409 +
 410 +static void vlynq_remove(struct vlynq_device *vdev)
 411 +{
 412 +       struct ieee80211_hw *hw = vlynq_get_drvdata(vdev);
 413 +       acx_device_t *adev = ieee2adev(hw);
 414 +       unsigned long flags;
 415 +       FN_ENTER;
 416 +
 417 +       if (!hw) {
 418 +               log(L_DEBUG, "%s: card is unused. Skipping any release code\n",
 419 +                   __func__);
 420 +               goto end;
 421 +       }
 422 +
 423 +
 424 +       acx_lock(adev, flags);
 425 +       acx_unlock(adev, flags);
 426 +       adev->initialized = 0;
 427 +
 428 +       /* If device wasn't hot unplugged... */
 429 +       if (adev_present(adev)) {
 430 +
 431 +               acx_sem_lock(adev);
 432 +
 433 +               /* disable both Tx and Rx to shut radio down properly */
 434 +               if (adev->initialized) {
 435 +                       acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_TX, NULL, 0);
 436 +                       acx_s_issue_cmd(adev, ACX1xx_CMD_DISABLE_RX, NULL, 0);
 437 +               }
 438 +               acx_lock(adev, flags);
 439 +               /* disable power LED to save power :-) */
 440 +               log(L_INIT, "switching off power LED to save power\n");
 441 +               acxpci_l_power_led(adev, 0);
 442 +               /* stop our eCPU */
 443 +               acx_unlock(adev, flags);
 444 +
 445 +               acx_sem_unlock(adev);
 446 +       }
 447 +
 448 +       /* unregister the device to not let the kernel
 449 +        * (e.g. ioctls) access a half-deconfigured device
 450 +        * NB: this will cause acxpci_e_close() to be called,
 451 +        * thus we shouldn't call it under sem!
 452 +        * Well, netdev did, but ieee80211 stack does not, so we
 453 +        * have to do so manually...
 454 +        */
 455 +       acxpci_e_close(hw);
 456 +       log(L_INIT, "removing device %s\n", wiphy_name(adev->ieee->wiphy));
 457 +       ieee80211_unregister_hw(adev->ieee);
 458 +
 459 +       /* unregister_netdev ensures that no references to us left.
 460 +        * For paranoid reasons we continue to follow the rules */
 461 +       acx_sem_lock(adev);
 462 +
 463 +       if (adev->dev_state_mask & ACX_STATE_IFACE_UP) {
 464 +               acxpci_s_down(hw);
 465 +               CLEAR_BIT(adev->dev_state_mask, ACX_STATE_IFACE_UP);
 466 +       }
 467 +
 468 +       acx_proc_unregister_entries(adev->ieee);
 469 +
 470 +       /* finally, clean up PCI bus state */
 471 +       acxpci_s_delete_dma_regions(adev);
 472 +       if (adev->iobase)
 473 +               iounmap(adev->iobase);
 474 +       if (adev->iobase2)
 475 +               iounmap(adev->iobase2);
 476 +       release_mem_region(vdev->mem_start, vdev->mem_end - vdev->mem_start);
 477 +
 478 +       /* remove dev registration */
 479 +
 480 +       acx_sem_unlock(adev);
 481 +       vlynq_disable_device(vdev);
 482 +
 483 +       /* Free netdev (quite late,
 484 +        * since otherwise we might get caught off-guard
 485 +        * by a netdev timeout handler execution
 486 +        * expecting to see a working dev...) */
 487 +       ieee80211_free_hw(adev->ieee);
 488 +
 489 +      end:
 490 +       FN_EXIT0;
 491 +}
 492 +
 493 +static struct vlynq_driver vlynq_acx = {
 494 +       .name = "acx_vlynq",
 495 +       .id_table = acx_vlynq_id,
 496 +       .probe = vlynq_probe,
 497 +       .remove = __devexit_p(vlynq_remove),
 498 +};
 499 +#endif
 500
 501  /***********************************************************************
 502  ** Data for init_module/cleanup_module
 503  */
 504 +#ifdef CONFIG_PCI
 505  static const struct pci_device_id acxpci_id_tbl[] __devinitdata = {
 506         {
 507          .vendor = PCI_VENDOR_ID_TI,
 508 @@ -4071,7 +4432,7 @@
 509         .resume = acxpci_e_resume
 510  #endif /* CONFIG_PM */
 511  };
 512 -
 513 +#endif /* CONFIG_PCI */
 514
 515  /***********************************************************************
 516  ** acxpci_e_init_module
 517 @@ -4080,7 +4441,7 @@
 518  */
 519  int __init acxpci_e_init_module(void)
 520  {
 521 -       int res;
 522 +       int res = 0;
 523
 524         FN_ENTER;
 525
 526 @@ -4100,10 +4461,15 @@
 527  #endif
 528         log(L_INIT,
 529             "acx: " ENDIANNESS_STRING
 530 -           "acx: PCI module " ACX_RELEASE " initialized, "
 531 +           "acx: PCI/VLYNQ module " ACX_RELEASE " initialized, "
 532             "waiting for cards to probe...\n");
 533
 534 +#ifdef CONFIG_PCI
 535         res = pci_register_driver(&acxpci_drv_id);
 536 +#endif
 537 +#ifdef CONFIG_VLYNQ
 538 +       res = vlynq_register_driver(&vlynq_acx);
 539 +#endif
 540         FN_EXIT1(res);
 541         return res;
 542  }
 543 @@ -4119,7 +4485,12 @@
 544  {
 545         FN_ENTER;
 546
 547 +#ifdef CONFIG_VLYNQ
 548 +       vlynq_unregister_driver(&vlynq_acx);
 549 +#endif
 550 +#ifdef CONFIG_PCI
 551         pci_unregister_driver(&acxpci_drv_id);
 552 +#endif
 553
 554         FN_EXIT0;
 555  }