add broadcom b44 driver support
[openwrt.git] / target / linux / adm5120 / files / drivers / serial / adm5120_uart.c
1 /*
2 * Serial driver for ADM5120 SoC
3 *
4 * Derived from drivers/serial/uart00.c
5 * Copyright 2001 Altera Corporation
6 *
7 * Some pieces are derived from the ADMtek 2.4 serial driver.
8 * Copyright (C) ADMtek Incorporated, 2003
9 * daniell@admtek.com.tw
10 * Which again was derived from drivers/char/serial.c
11 * Copyright (C) Linus Torvalds et al.
12 *
13 * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
14 */
15
16 #include <linux/autoconf.h>
17 #include <linux/init.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/ioport.h>
21 #include <linux/serial.h>
22 #include <linux/serial_core.h>
23 #include <linux/tty.h>
24 #include <linux/tty_flip.h>
25 #include <linux/console.h>
26
27 #include <asm/mach-adm5120/adm5120_defs.h>
28 #include <asm/mach-adm5120/adm5120_irq.h>
29
30 #define ADM5120_UART_REG(base, reg) \
31 (*(volatile u32 *)KSEG1ADDR((base)+(reg)))
32
33 #define ADM5120_UARTCLK_FREQ 62500000
34 #define ADM5120_UART_BAUDDIV(rate) ((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(rate)) - 1))
35
36 #define ADM5120_UART_BAUD115200 ADM5120_UART_BAUDDIV(115200)
37
38 #define ADM5120_UART_DATA 0x00
39 #define ADM5120_UART_RS 0x04
40 #define ADM5120_UART_LCR_H 0x08
41 #define ADM5120_UART_LCR_M 0x0c
42 #define ADM5120_UART_LCR_L 0x10
43 #define ADM5120_UART_CR 0x14
44 #define ADM5120_UART_FR 0x18
45 #define ADM5120_UART_IR 0x1c
46
47 #define ADM5120_UART_FE 0x01
48 #define ADM5120_UART_PE 0x02
49 #define ADM5120_UART_BE 0x04
50 #define ADM5120_UART_OE 0x08
51 #define ADM5120_UART_ERR 0x0f
52 #define ADM5120_UART_FIFO_EN 0x10
53 #define ADM5120_UART_EN 0x01
54 #define ADM5120_UART_TIE 0x20
55 #define ADM5120_UART_RIE 0x50
56 #define ADM5120_UART_IE 0x78
57 #define ADM5120_UART_CTS 0x01
58 #define ADM5120_UART_DSR 0x02
59 #define ADM5120_UART_DCD 0x04
60 #define ADM5120_UART_TXFF 0x20
61 #define ADM5120_UART_TXFE 0x80
62 #define ADM5120_UART_RXFE 0x10
63 #define ADM5120_UART_BRK 0x01
64 #define ADM5120_UART_PEN 0x02
65 #define ADM5120_UART_EPS 0x04
66 #define ADM5120_UART_STP2 0x08
67 #define ADM5120_UART_W5 0x00
68 #define ADM5120_UART_W6 0x20
69 #define ADM5120_UART_W7 0x40
70 #define ADM5120_UART_W8 0x60
71 #define ADM5120_UART_MIS 0x01
72 #define ADM5120_UART_RIS 0x02
73 #define ADM5120_UART_TIS 0x04
74 #define ADM5120_UART_RTIS 0x08
75
76 static void adm5120ser_stop_tx(struct uart_port *port)
77 {
78 ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE;
79 }
80
81 static void adm5120ser_irq_rx(struct uart_port *port)
82 {
83 struct tty_struct *tty = port->info->tty;
84 unsigned int status, ch, rds, flg, ignored = 0;
85
86 status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
87 while (!(status & ADM5120_UART_RXFE)) {
88 /*
89 * We need to read rds before reading the
90 * character from the fifo
91 */
92 rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS);
93 ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA);
94 port->icount.rx++;
95
96 if (tty->low_latency)
97 tty_flip_buffer_push(tty);
98
99 flg = TTY_NORMAL;
100
101 /*
102 * Note that the error handling code is
103 * out of the main execution path
104 */
105 if (rds & ADM5120_UART_ERR)
106 goto handle_error;
107 if (uart_handle_sysrq_char(port, ch))
108 goto ignore_char;
109
110 error_return:
111 tty_insert_flip_char(tty, ch, flg);
112
113 ignore_char:
114 status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
115 }
116 out:
117 tty_flip_buffer_push(tty);
118 return;
119
120 handle_error:
121 ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff;
122 if (rds & ADM5120_UART_BE) {
123 port->icount.brk++;
124 if (uart_handle_break(port))
125 goto ignore_char;
126 } else if (rds & ADM5120_UART_PE)
127 port->icount.parity++;
128 else if (rds & ADM5120_UART_FE)
129 port->icount.frame++;
130 if (rds & ADM5120_UART_OE)
131 port->icount.overrun++;
132
133 if (rds & port->ignore_status_mask) {
134 if (++ignored > 100)
135 goto out;
136 goto ignore_char;
137 }
138 rds &= port->read_status_mask;
139
140 if (rds & ADM5120_UART_BE)
141 flg = TTY_BREAK;
142 else if (rds & ADM5120_UART_PE)
143 flg = TTY_PARITY;
144 else if (rds & ADM5120_UART_FE)
145 flg = TTY_FRAME;
146
147 if (rds & ADM5120_UART_OE) {
148 /*
149 * CHECK: does overrun affect the current character?
150 * ASSUMPTION: it does not.
151 */
152 tty_insert_flip_char(tty, ch, flg);
153 ch = 0;
154 flg = TTY_OVERRUN;
155 }
156 #ifdef CONFIG_MAGIC_SYSRQ
157 port->sysrq = 0;
158 #endif
159 goto error_return;
160 }
161
162 static void adm5120ser_irq_tx(struct uart_port *port)
163 {
164 struct circ_buf *xmit = &port->info->xmit;
165 int count;
166
167 if (port->x_char) {
168 ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
169 port->x_char;
170 port->icount.tx++;
171 port->x_char = 0;
172 return;
173 }
174 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
175 adm5120ser_stop_tx(port);
176 return;
177 }
178
179 count = port->fifosize >> 1;
180 do {
181 ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) =
182 xmit->buf[xmit->tail];
183 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
184 port->icount.tx++;
185 if (uart_circ_empty(xmit))
186 break;
187 } while (--count > 0);
188
189 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
190 uart_write_wakeup(port);
191
192 if (uart_circ_empty(xmit))
193 adm5120ser_stop_tx(port);
194 }
195
196 static void adm5120ser_irq_modem(struct uart_port *port)
197 {
198 unsigned int status;
199
200 status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
201
202 if (status & ADM5120_UART_DCD)
203 uart_handle_dcd_change(port, status & ADM5120_UART_DCD);
204
205 if (status & ADM5120_UART_DSR)
206 port->icount.dsr++;
207
208 if (status & ADM5120_UART_CTS)
209 uart_handle_cts_change(port, status & ADM5120_UART_CTS);
210
211 wake_up_interruptible(&port->info->delta_msr_wait);
212 }
213
214 static irqreturn_t adm5120ser_irq(int irq, void *dev_id)
215 {
216 struct uart_port *port = dev_id;
217 unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR);
218
219 if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS))
220 adm5120ser_irq_rx(port);
221 if (ir & ADM5120_UART_TIS)
222 adm5120ser_irq_tx(port);
223 if (ir & ADM5120_UART_MIS) {
224 adm5120ser_irq_modem(port);
225 ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff;
226 }
227
228 return IRQ_HANDLED;
229 }
230
231 static unsigned int adm5120ser_tx_empty(struct uart_port *port)
232 {
233 unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
234 return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0;
235 }
236
237 static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl)
238 {
239 }
240
241 static unsigned int adm5120ser_get_mctrl(struct uart_port *port)
242 {
243 unsigned int result = 0;
244 unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR);
245
246 if (fr & ADM5120_UART_CTS)
247 result |= TIOCM_CTS;
248 if (fr & ADM5120_UART_DSR)
249 result |= TIOCM_DSR;
250 if (fr & ADM5120_UART_DCD)
251 result |= TIOCM_CAR;
252 return result;
253 }
254
255 static void adm5120ser_start_tx(struct uart_port *port)
256 {
257 ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE;
258 }
259
260 static void adm5120ser_stop_rx(struct uart_port *port)
261 {
262 ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE;
263 }
264
265 static void adm5120ser_enable_ms(struct uart_port *port)
266 {
267 }
268
269 static void adm5120ser_break_ctl(struct uart_port *port, int break_state)
270 {
271 unsigned long flags;
272 unsigned long lcrh;
273
274 spin_lock_irqsave(&port->lock, flags);
275 lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H);
276 if (break_state == -1)
277 lcrh |= ADM5120_UART_BRK;
278 else
279 lcrh &= ~ADM5120_UART_BRK;
280 ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
281 spin_unlock_irqrestore(&port->lock, flags);
282 }
283
284 static int adm5120ser_startup(struct uart_port *port)
285 {
286 int ret;
287
288 ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port);
289 if (ret) {
290 printk(KERN_ERR "Couldn't get irq %d\n", port->irq);
291 return ret;
292 }
293 ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |=
294 ADM5120_UART_FIFO_EN;
295 ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |=
296 ADM5120_UART_EN | ADM5120_UART_IE;
297 return 0;
298 }
299
300 static void adm5120ser_shutdown(struct uart_port *port)
301 {
302 ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE;
303 free_irq(port->irq, port);
304 }
305
306 static void adm5120ser_set_termios(struct uart_port *port,
307 struct ktermios *termios, struct ktermios *old)
308 {
309 unsigned int baud, quot, lcrh;
310 unsigned long flags;
311
312 termios->c_cflag |= CREAD;
313
314 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
315 quot = uart_get_divisor(port, baud);
316
317 lcrh = ADM5120_UART_FIFO_EN;
318 switch (termios->c_cflag & CSIZE) {
319 case CS5:
320 lcrh |= ADM5120_UART_W5;
321 break;
322 case CS6:
323 lcrh |= ADM5120_UART_W6;
324 break;
325 case CS7:
326 lcrh |= ADM5120_UART_W7;
327 break;
328 default:
329 lcrh |= ADM5120_UART_W8;
330 break;
331 }
332 if (termios->c_cflag & CSTOPB)
333 lcrh |= ADM5120_UART_STP2;
334 if (termios->c_cflag & PARENB) {
335 lcrh |= ADM5120_UART_PEN;
336 if (!(termios->c_cflag & PARODD))
337 lcrh |= ADM5120_UART_EPS;
338 }
339
340 spin_lock_irqsave(port->lock, flags);
341
342 ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh;
343
344 /*
345 * Update the per-port timeout.
346 */
347 uart_update_timeout(port, termios->c_cflag, baud);
348
349 port->read_status_mask = ADM5120_UART_OE;
350 if (termios->c_iflag & INPCK)
351 port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
352 if (termios->c_iflag & (BRKINT | PARMRK))
353 port->read_status_mask |= ADM5120_UART_BE;
354
355 /*
356 * Characters to ignore
357 */
358 port->ignore_status_mask = 0;
359 if (termios->c_iflag & IGNPAR)
360 port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE;
361 if (termios->c_iflag & IGNBRK) {
362 port->ignore_status_mask |= ADM5120_UART_BE;
363 /*
364 * If we're ignoring parity and break indicators,
365 * ignore overruns to (for real raw support).
366 */
367 if (termios->c_iflag & IGNPAR)
368 port->ignore_status_mask |= ADM5120_UART_OE;
369 }
370
371 quot = ADM5120_UART_BAUD115200;
372 ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff;
373 ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8;
374
375 spin_unlock_irqrestore(&port->lock, flags);
376 }
377
378 static const char *adm5120ser_type(struct uart_port *port)
379 {
380 return port->type == PORT_ADM5120 ? "ADM5120" : NULL;
381 }
382
383 static void adm5120ser_config_port(struct uart_port *port, int flags)
384 {
385 if (flags & UART_CONFIG_TYPE)
386 port->type = PORT_ADM5120;
387 }
388
389 static void adm5120ser_release_port(struct uart_port *port)
390 {
391 release_mem_region(port->iobase, ADM5120_UART_SIZE);
392 }
393
394 static int adm5120ser_request_port(struct uart_port *port)
395 {
396 return request_mem_region(port->iobase, ADM5120_UART_SIZE,
397 "adm5120-uart") != NULL ? 0 : -EBUSY;
398 }
399
400 static struct uart_ops adm5120ser_ops = {
401 .tx_empty = adm5120ser_tx_empty,
402 .set_mctrl = adm5120ser_set_mctrl,
403 .get_mctrl = adm5120ser_get_mctrl,
404 .stop_tx = adm5120ser_stop_tx,
405 .start_tx = adm5120ser_start_tx,
406 .stop_rx = adm5120ser_stop_rx,
407 .enable_ms = adm5120ser_enable_ms,
408 .break_ctl = adm5120ser_break_ctl,
409 .startup = adm5120ser_startup,
410 .shutdown = adm5120ser_shutdown,
411 .set_termios = adm5120ser_set_termios,
412 .type = adm5120ser_type,
413 .config_port = adm5120ser_config_port,
414 .release_port = adm5120ser_release_port,
415 .request_port = adm5120ser_request_port,
416 };
417
418 static void adm5120console_put(const char c)
419 {
420 while ((ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_FR) &
421 ADM5120_UART_TXFF) != 0);
422 ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_DATA) = c;
423 }
424
425 static void adm5120console_write(struct console *con, const char *s,
426 unsigned int count)
427 {
428 while (count--) {
429 if (*s == '\n')
430 adm5120console_put('\r');
431 adm5120console_put(*s);
432 s++;
433 }
434 }
435
436 static int adm5120console_setup(struct console *con, char *options)
437 {
438 /* Set to 115200 baud, 8N1 and enable FIFO */
439 ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_L) =
440 ADM5120_UART_BAUD115200 & 0xff;
441 ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_M) =
442 ADM5120_UART_BAUD115200 >> 8;
443 ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_H) =
444 ADM5120_UART_W8 | ADM5120_UART_FIFO_EN;
445 /* Enable port */
446 ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_CR) =
447 ADM5120_UART_EN;
448
449 return 0;
450 }
451
452 static struct uart_driver adm5120ser_reg;
453
454 static struct console adm5120_serconsole = {
455 .name = "ttyS",
456 .write = adm5120console_write,
457 .device = uart_console_device,
458 .setup = adm5120console_setup,
459 .flags = CON_PRINTBUFFER,
460 .cflag = B115200 | CS8 | CREAD,
461 .index = 0,
462 .data = &adm5120ser_reg,
463 };
464
465 static int __init adm5120console_init(void)
466 {
467 register_console(&adm5120_serconsole);
468 return 0;
469 }
470
471 console_initcall(adm5120console_init);
472
473
474 static struct uart_port adm5120ser_ports[] = {
475 {
476 .iobase = ADM5120_UART0_BASE,
477 .irq = ADM5120_IRQ_UART0,
478 .uartclk = ADM5120_UARTCLK_FREQ,
479 .fifosize = 16,
480 .ops = &adm5120ser_ops,
481 .line = 0,
482 .flags = ASYNC_BOOT_AUTOCONF,
483 },
484 #if (CONFIG_ADM5120_NR_UARTS > 1)
485 {
486 .iobase = ADM5120_UART1_BASE,
487 .irq = ADM5120_IRQ_UART1,
488 .uartclk = ADM5120_UARTCLK_FREQ,
489 .fifosize = 16,
490 .ops = &adm5120ser_ops,
491 .line = 1,
492 .flags = ASYNC_BOOT_AUTOCONF,
493 },
494 #endif
495 };
496
497 static struct uart_driver adm5120ser_reg = {
498 .owner = THIS_MODULE,
499 .driver_name = "ttyS",
500 .dev_name = "ttyS",
501 .major = TTY_MAJOR,
502 .minor = 64,
503 .nr = CONFIG_ADM5120_NR_UARTS,
504 .cons = &adm5120_serconsole,
505 };
506
507 static int __init adm5120ser_init(void)
508 {
509 int ret, i;
510
511 ret = uart_register_driver(&adm5120ser_reg);
512 if (!ret) {
513 for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++)
514 uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]);
515 }
516
517 return ret;
518 }
519
520 __initcall(adm5120ser_init);
This page took 0.07259 seconds and 5 git commands to generate.