openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig

   1 #!/bin/sh
   2 [ -e /etc/config/network ] && exit 0
   3
   4 mkdir -p /etc/config
   5
   6 (
   7         if grep 'mtd0: 00060000' /proc/mtd 2>&- >&-; then
   8                 # WGT634u
   9                 echo boardtype=wgt634u
  10         else
  11                 strings /dev/mtdblock/3
  12         fi
  13 ) | awk '
  14 function p(name) {
  15         if (c[name] != "") print name "=\"" c[name] "\""
  16 }
  17
  18 BEGIN {
  19         FS="="
  20         c["lan_ifname"]="br0"
  21         c["lan_ifnames"]="vlan0 eth1"
  22         c["wan_proto"]="none"
  23         c["wan_ifname"]="vlan1"
  24         c["vlan0ports"]="1 2 3 4 5*"
  25         c["vlan1ports"]="0 5"
  26 }
  27
  28 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
  29         nvram[$1] = $2
  30 }
  31
  32 END {
  33         # v1 hardware
  34         if (nvram["boardtype"] == "bcm94710dev") {
  35                 # Linksys WRT54G v1.x
  36                 if (nvram["boardnum"] == "42") {
  37                         c["vlan0ports"]=""
  38                         c["vlan1ports"]=""
  39                         c["lan_ifnames"]="vlan2 eth2"
  40                 }
  41
  42                 # Asus WL-500g
  43                 if (nvram["boardnum"] == "asusX") {
  44                         c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
  45                         # wan_ifname=eth1
  46                 }
  47         }
  48         if (nvram["boardtype"] == "wgt634u") {
  49                 c["vlan0ports"] = "0 1 2 3 5*"
  50                 c["vlan1ports"] = "4 5"
  51         }
  52         if (nvram["boardtype"] == "0x0467") {
  53                 c["vlan0ports"] = "0 1 2 3 5*"
  54                 c["vlan1ports"] = "4 5"
  55         }
  56
  57         # WAP54G
  58         if ((nvram["boardnum"] == "2") || \
  59                 (nvram["boardnum"] == "1024")) {
  60                 c["lan_ifnames"]="eth0 eth1"
  61                 c["wan_ifname"]=""
  62         }
  63
  64         print "#### VLAN configuration "
  65         print "vlan0hwname=et0"
  66         print "vlan1hwname=et0"
  67         p("vlan0ports")
  68         p("vlan1ports")
  69         print ""
  70         print ""
  71
  72         print "#### LAN configuration"
  73         print "lan_proto=\"static\""
  74         p("lan_ifname")
  75         p("lan_ifnames")
  76         print "lan_ipaddr=\"192.168.1.1\""
  77         print "# lan_dns=\"192.168.1.1\""
  78         print "# lan_gateway=\"192.168.1.1\""
  79
  80         print ""
  81         print ""
  82
  83         print "#### WAN configuration"
  84         print "# wan_proto: WAN protocol, available protocols:"
  85         print "#   none: disable"
  86         print "#   dhcp: DHCP"
  87         print "#   static: Static IP"
  88         print "#   pppoe: PPP over Ethernet"
  89         print "#   pptp: Point-to-Point tunneling Protocol"
  90         print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
  91         print ""
  92         print "wan_proto=dhcp"
  93         p("wan_ifname")
  94         print "wan_device=\"" c["wan_ifname"] "\""
  95         print "# wan_ipaddr=\"192.168.0.2\""
  96         print "# wan_netmask=\"255.255.255.0\""
  97         print "# wan_gateway=\"192.168.0.1\""
  98         print "# wan_dns=\"192.168.0.1\""
  99         print ""
 100         print "## PPP over Ethernet and PPTP"
 101         print "# wan_ifname=\"ppp0\""
 102         print "# pptp_server_ip=\"192.168.0.1\""
 103 }
 104 ' > /etc/config/network