projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
Add the PS3 specific utility bl-option, a helper sctipt
[openwrt.git] / target / linux / storm / patches / 007-mtd.patch
1 --- a/drivers/mtd/chips/Kconfig
2 +++ b/drivers/mtd/chips/Kconfig
3 @@ -220,6 +220,13 @@
4 This option enables basic support for ROM chips accessed through
5 a bus mapping driver.
6
7 +config MTD_SERIAL
8 + tristate "Support for Serial chips in bus mapping"
9 + depends on MTD
10 + help
11 + This option enables basic support for Serial chips accessed through
12 + a bus mapping driver.
13 +
14 config MTD_ABSENT
15 tristate "Support for absent chips in bus mapping"
16 help
17 --- a/drivers/mtd/chips/cfi_cmdset_0002.c
18 +++ b/drivers/mtd/chips/cfi_cmdset_0002.c
19 @@ -39,10 +39,15 @@
20 #include <linux/mtd/cfi.h>
21 #include <linux/mtd/xip.h>
22
23 +//****** Storlink SoC ******
24 #define AMD_BOOTLOC_BUG
25 -#define FORCE_WORD_WRITE 0
26 -
27 -#define MAX_WORD_RETRIES 3
28 +//#define FORCE_WORD_WRITE 0
29 +#define FORCE_WORD_WRITE 1
30 +#define FORCE_FAST_PROG 0
31 +
32 +//#define MAX_WORD_RETRIES 3
33 +#define MAX_WORD_RETRIES 3 // CONFIG_MTD_CFI_AMDSTD_RETRY
34 +//**************************
35
36 #define MANUFACTURER_AMD 0x0001
37 #define MANUFACTURER_ATMEL 0x001F
38 @@ -322,6 +327,13 @@
39 #endif
40
41 bootloc = extp->TopBottom;
42 +//****** Storlink SoC ******
43 + if(bootloc == 5)
44 + {
45 + bootloc = 3;
46 + extp->TopBottom = 3;
47 + }
48 +//**************************
49 if ((bootloc != 2) && (bootloc != 3)) {
50 printk(KERN_WARNING "%s: CFI does not contain boot "
51 "bank location. Assuming top.\n", map->name);
52 @@ -340,6 +352,9 @@
53 cfi->cfiq->EraseRegionInfo[j] = swap;
54 }
55 }
56 +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1
57 + cfi->device_type = CFI_DEVICETYPE_X8;
58 +#endif
59 /* Set the default CFI lock/unlock addresses */
60 cfi->addr_unlock1 = 0x555;
61 cfi->addr_unlock2 = 0x2aa;
62 @@ -461,6 +476,7 @@
63 map_word d, t;
64
65 d = map_read(map, addr);
66 + udelay(20); //Storlink SoC
67 t = map_read(map, addr);
68
69 return map_word_equal(map, d, t);
70 @@ -626,7 +642,9 @@
71 default:
72 printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
73 }
74 +//****** Storlink SoC ******
75 wake_up(&chip->wq);
76 +//**************************
77 }
78
79 #ifdef CONFIG_MTD_XIP
80 @@ -940,7 +958,9 @@
81 cfi_send_gen_cmd(0x90, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
82 cfi_send_gen_cmd(0x00, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
83
84 +//****** Storlink SoC ******
85 wake_up(&chip->wq);
86 +//**************************
87 spin_unlock(chip->mutex);
88
89 return 0;
90 @@ -1005,7 +1025,10 @@
91 */
92 unsigned long uWriteTimeout = ( HZ / 1000 ) + 1;
93 int ret = 0;
94 - map_word oldd;
95 +//****** Storlink SoC ******
96 +// map_word oldd;
97 + map_word oldd, tmp;
98 +//**************************
99 int retry_cnt = 0;
100
101 adr += chip->start;
102 @@ -1037,9 +1060,15 @@
103 ENABLE_VPP(map);
104 xip_disable(map, chip, adr);
105 retry:
106 +//****** Storlink SoC ******
107 +#if FORCE_FAST_PROG /* Unlock bypass */
108 + cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
109 +#else
110 cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
111 cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
112 cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
113 +#endif
114 +//**************************
115 map_write(map, datum, adr);
116 chip->state = FL_WRITING;
117
118 @@ -1072,7 +1101,13 @@
119 }
120
121 if (chip_ready(map, adr))
122 - break;
123 + {
124 + tmp = map_read(map, adr);
125 + if(map_word_equal(map, tmp, datum))
126 +// goto op_done;
127 + break;
128 +
129 + }
130
131 /* Latency issues. Drop the lock, wait a while and retry */
132 UDELAY(map, chip, adr, 1);
133 @@ -1084,8 +1119,17 @@
134 /* FIXME - should have reset delay before continuing */
135
136 if (++retry_cnt <= MAX_WORD_RETRIES)
137 + {
138 +//****** Storlink SoC ******
139 +#if FORCE_FAST_PROG
140 + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
141 + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
142 + cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
143 + //udelay(1);
144 +#endif
145 + udelay(1);
146 goto retry;
147 -
148 + }
149 ret = -EIO;
150 }
151 xip_enable(map, chip, adr);
152 @@ -1171,7 +1215,14 @@
153 return 0;
154 }
155 }
156 -
157 +//****** Storlink SoC ******
158 + map_write( map, CMD(0xF0), chipstart );
159 +#if FORCE_FAST_PROG
160 + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
161 + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
162 + cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
163 +#endif
164 +//**************************
165 /* We are now aligned, write as much as possible */
166 while(len >= map_bankwidth(map)) {
167 map_word datum;
168 @@ -1181,7 +1232,15 @@
169 ret = do_write_oneword(map, &cfi->chips[chipnum],
170 ofs, datum);
171 if (ret)
172 + {
173 +//****** Storlink SoC ******
174 +#if FORCE_FAST_PROG
175 + /* Get out of unlock bypass mode */
176 + cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
177 + cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
178 +#endif
179 return ret;
180 + }
181
182 ofs += map_bankwidth(map);
183 buf += map_bankwidth(map);
184 @@ -1189,19 +1248,38 @@
185 len -= map_bankwidth(map);
186
187 if (ofs >> cfi->chipshift) {
188 +//****** Storlink SoC ******
189 +#if FORCE_FAST_PROG
190 + /* Get out of unlock bypass mode */
191 + cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
192 + cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
193 +#endif
194 chipnum ++;
195 ofs = 0;
196 if (chipnum == cfi->numchips)
197 return 0;
198 chipstart = cfi->chips[chipnum].start;
199 +#if FORCE_FAST_PROG
200 + /* Go into unlock bypass mode for next set of chips */
201 + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
202 + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
203 + cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
204 +#endif
205 }
206 }
207
208 +#if FORCE_FAST_PROG
209 + /* Get out of unlock bypass mode */
210 + cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
211 + cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
212 +#endif
213 +
214 /* Write the trailing bytes if any */
215 if (len & (map_bankwidth(map)-1)) {
216 map_word tmp_buf;
217
218 retry1:
219 +
220 spin_lock(cfi->chips[chipnum].mutex);
221
222 if (cfi->chips[chipnum].state != FL_READY) {
223 @@ -1221,7 +1299,11 @@
224 #endif
225 goto retry1;
226 }
227 -
228 +#if FORCE_FAST_PROG
229 + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
230 + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chipstart, map, cfi, cfi->device_type, NULL);
231 + cfi_send_gen_cmd(0x20, cfi->addr_unlock1, chipstart, map, cfi, cfi->device_type, NULL);
232 +#endif
233 tmp_buf = map_read(map, ofs + chipstart);
234
235 spin_unlock(cfi->chips[chipnum].mutex);
236 @@ -1231,11 +1313,23 @@
237 ret = do_write_oneword(map, &cfi->chips[chipnum],
238 ofs, tmp_buf);
239 if (ret)
240 + {
241 +#if FORCE_FAST_PROG
242 + /* Get out of unlock bypass mode */
243 + cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
244 + cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
245 +#endif
246 return ret;
247 -
248 + }
249 +#if FORCE_FAST_PROG
250 + /* Get out of unlock bypass mode */
251 + cfi_send_gen_cmd(0x90, 0, chipstart, map, cfi, cfi->device_type, NULL);
252 + cfi_send_gen_cmd(0x00, 0, chipstart, map, cfi, cfi->device_type, NULL);
253 +#endif
254 (*retlen) += len;
255 }
256
257 + map_write( map, CMD(0xF0), chipstart );
258 return 0;
259 }
260
261 @@ -1275,6 +1369,7 @@
262 ENABLE_VPP(map);
263 xip_disable(map, chip, cmd_adr);
264
265 + map_write( map, CMD(0xF0), chip->start ); //Storlink
266 cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
267 cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL);
268 //cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL);
269 @@ -1535,6 +1630,9 @@
270 DECLARE_WAITQUEUE(wait, current);
271 int ret = 0;
272
273 +#ifdef CONFIG_SL2312_SHARE_PIN
274 + mtd_lock(); // sl2312 share pin lock
275 +#endif
276 adr += chip->start;
277
278 spin_lock(chip->mutex);
279 @@ -1613,6 +1711,9 @@
280 chip->state = FL_READY;
281 put_chip(map, chip, adr);
282 spin_unlock(chip->mutex);
283 +#ifdef CONFIG_SL2312_SHARE_PIN
284 + mtd_unlock(); // sl2312 share pin lock
285 +#endif
286 return ret;
287 }
288
289 --- /dev/null
290 +++ b/drivers/mtd/chips/map_serial.c
291 @@ -0,0 +1,188 @@
292 +/*
293 + * Common code to handle map devices which are simple ROM
294 + * (C) 2000 Red Hat. GPL'd.
295 + * $Id: map_serial.c,v 1.3 2006/06/05 02:34:54 middle Exp $
296 + */
297 +
298 +#include <linux/version.h>
299 +#include <linux/module.h>
300 +#include <linux/types.h>
301 +#include <linux/kernel.h>
302 +#include <asm/io.h>
303 +
304 +#include <asm/byteorder.h>
305 +#include <linux/errno.h>
306 +#include <linux/slab.h>
307 +
308 +#include <asm/hardware.h>
309 +#include <linux/mtd/map.h>
310 +#include <linux/mtd/mtd.h>
311 +#include <linux/init.h> //add
312 +#include <asm/arch/sl2312.h>
313 +#include <asm/arch/flash.h>
314 +
315 +static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr);
316 +static int mapserial_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
317 +static int mapserial_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
318 +static void mapserial_nop (struct mtd_info *);
319 +struct mtd_info *map_serial_probe(struct map_info *map);
320 +
321 +extern int m25p80_sector_erase(__u32 address, __u32 schip_en);
322 +
323 +static struct mtd_chip_driver mapserial_chipdrv = {
324 + probe: map_serial_probe,
325 + name: "map_serial",
326 + module: THIS_MODULE
327 +};
328 +
329 +struct mtd_info *map_serial_probe(struct map_info *map)
330 +{
331 + struct mtd_info *mtd;
332 +
333 + mtd = kmalloc(sizeof(*mtd), GFP_KERNEL);
334 + if (!mtd)
335 + return NULL;
336 +
337 + memset(mtd, 0, sizeof(*mtd));
338 +
339 + map->fldrv = &mapserial_chipdrv;
340 + mtd->priv = map;
341 + mtd->name = map->name;
342 + mtd->type = MTD_OTHER;
343 + mtd->erase = mapserial_erase;
344 + mtd->size = map->size;
345 + mtd->read = mapserial_read;
346 + mtd->write = mapserial_write;
347 + mtd->sync = mapserial_nop;
348 + mtd->flags = (MTD_WRITEABLE|MTD_ERASEABLE);
349 +// mtd->erasesize = 512; // page size;
350 +#ifdef CONFIG_MTD_SL2312_SERIAL_ST
351 + mtd->erasesize = M25P80_SECTOR_SIZE; // block size;
352 +#else
353 + mtd->erasesize = 0x1000; // block size;
354 +#endif
355 +
356 + __module_get(THIS_MODULE);
357 + //MOD_INC_USE_COUNT;
358 + return mtd;
359 +}
360 +
361 +#define FLASH_ACCESS_OFFSET 0x00000010
362 +#define FLASH_ADDRESS_OFFSET 0x00000014
363 +#define FLASH_WRITE_DATA_OFFSET 0x00000018
364 +#define FLASH_READ_DATA_OFFSET 0x00000018
365 +
366 +static __u32 readflash_ctrl_reg(__u32 ofs)
367 +{
368 + __u32 *base;
369 +
370 + base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
371 + return __raw_readl(base);
372 +}
373 +
374 +static void writeflash_ctrl_reg(__u32 data, __u32 ofs)
375 +{
376 + __u32 *base;
377 +
378 + base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
379 + __raw_writel(data, base);
380 +}
381 +
382 +static int mapserial_erase_block(struct map_info *map,unsigned int block)
383 +{
384 +
385 + __u32 address;
386 +#ifdef CONFIG_MTD_SL2312_SERIAL_ST
387 +
388 + if(!m25p80_sector_erase(block, 0))
389 + return (MTD_ERASE_DONE);
390 +#else
391 + __u32 opcode;
392 + __u32 count=0;
393 +// __u8 status;
394 +
395 + // printk("mapserial_erase_block : erase block %d \n",block);
396 +// opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd;
397 + opcode = 0x80000000 | 0x0200 | 0x50;
398 + address = (block << 13);
399 + writeflash_ctrl_reg(address,FLASH_ADDRESS_OFFSET);
400 + writeflash_ctrl_reg(opcode,FLASH_ACCESS_OFFSET);
401 + opcode=readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
402 + while(opcode&0x80000000)
403 + {
404 + opcode = readflash_ctrl_reg(FLASH_ACCESS_OFFSET);
405 + count++;
406 + if (count > 10000)
407 + {
408 + return (MTD_ERASE_FAILED);
409 + }
410 + }
411 + return (MTD_ERASE_DONE);
412 +#endif
413 +}
414 +
415 +static int mapserial_erase(struct mtd_info *mtd, struct erase_info *instr)
416 +{
417 + struct map_info *map = (struct map_info *)mtd->priv;
418 + unsigned int addr;
419 + int len;
420 + unsigned int block;
421 + unsigned int ret=0;
422 +
423 + addr = instr->addr;
424 + len = instr->len;
425 + while (len > 0)
426 + {
427 + block = addr / mtd->erasesize;
428 +#ifdef CONFIG_MTD_SL2312_SERIAL_ST
429 + ret = mapserial_erase_block(map,addr);
430 +#else
431 + ret = mapserial_erase_block(map,block);
432 +#endif
433 + addr = addr + mtd->erasesize;
434 + len = len - mtd->erasesize;
435 + }
436 + return (ret);
437 +}
438 +
439 +static int mapserial_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf)
440 +{
441 + struct map_info *map = (struct map_info *)mtd->priv;
442 +// printk("mapserial_read : \n");
443 + map->copy_from(map, buf, from, len);
444 + *retlen = len;
445 + return 0;
446 +}
447 +
448 +static void mapserial_nop(struct mtd_info *mtd)
449 +{
450 + /* Nothing to see here */
451 +}
452 +
453 +static int mapserial_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf)
454 +{
455 + struct map_info *map = (struct map_info *)mtd->priv;
456 +// printk("mapserial_write : buf %x to %x len %x \n",(int)buf, (int)to, (int)len);
457 + //map->copy_to(map, buf, to, len);
458 + map->copy_to(map, to, buf, len);
459 + *retlen = len;
460 + return 0;
461 +}
462 +
463 +int __init map_serial_init(void)
464 +{
465 + register_mtd_chip_driver(&mapserial_chipdrv);
466 + return 0;
467 +}
468 +
469 +static void __exit map_serial_exit(void)
470 +{
471 + unregister_mtd_chip_driver(&mapserial_chipdrv);
472 +}
473 +
474 +module_init(map_serial_init);
475 +module_exit(map_serial_exit);
476 +
477 +MODULE_LICENSE("GPL");
478 +MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
479 +MODULE_DESCRIPTION("MTD chip driver for ROM chips");
480 --- a/drivers/mtd/maps/Kconfig
481 +++ b/drivers/mtd/maps/Kconfig
482 @@ -614,5 +614,30 @@
483
484 This selection automatically selects the map_ram driver.
485
486 +#***************************************************************************************
487 +# Storlink parallel/Serial Flash configuration
488 +#***************************************************************************************
489 +config MTD_SL2312_CFI
490 + tristate "CFI Flash device mapped on SL2312"
491 + depends on MTD_CFI
492 + help
493 + Map driver for SL2312 demo board.
494 +
495 +config MTD_SL2312_SERIAL_ATMEL
496 + tristate "ATMEL Serial Flash device mapped on SL2312"
497 + depends on MTD_PARTITIONS && ARCH_SL2312
498 + help
499 + Map driver for SL2312 demo board.
500 +
501 +config MTD_SL2312_SERIAL_ST
502 + tristate "ST Serial Flash device mapped on SL2312"
503 + depends on MTD_PARTITIONS && ARCH_SL2312
504 + help
505 + Map driver for SL2312 demo board.
506 +
507 +config SL2312_SHARE_PIN
508 + tristate "Parallel Flash share pin on SL2312 ASIC"
509 + depends on SL3516_ASIC
510 +
511 endmenu
512
513 --- /dev/null
514 +++ b/drivers/mtd/maps/sl2312-flash-atmel.c
515 @@ -0,0 +1,554 @@
516 +/*
517 + * $Id: sl2312-flash-atmel.c,v 1.2 2006/06/05 02:35:57 middle Exp $
518 + *
519 + * Flash and EPROM on Hitachi Solution Engine and similar boards.
520 + *
521 + * (C) 2001 Red Hat, Inc.
522 + *
523 + * GPL'd
524 + */
525 +
526 +#include <linux/module.h>
527 +#include <linux/types.h>
528 +#include <linux/kernel.h>
529 +
530 +#include <asm/io.h>
531 +#include <linux/mtd/mtd.h>
532 +#include <linux/mtd/map.h>
533 +#include <linux/mtd/partitions.h>
534 +#include <asm/hardware.h>
535 +
536 +#include <asm/arch/sl2312.h>
537 +#include <asm/arch/flash.h>
538 +#include <linux/init.h> //add
539 +
540 +
541 +#define g_page_addr AT45DB321_PAGE_SHIFT //321 : shift 10 ; 642 : shift 11
542 +#define g_chipen SERIAL_FLASH_CHIP0_EN //atmel
543 +
544 +extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
545 +
546 +void address_to_page(__u32 address, __u16 *page, __u16 *offset)
547 +{
548 + *page = address / SPAGE_SIZE;
549 + *offset = address % SPAGE_SIZE;
550 +}
551 +
552 +static __u32 read_flash_ctrl_reg(__u32 ofs)
553 +{
554 + __u32 *base;
555 +
556 + base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
557 + return __raw_readl(base);
558 +}
559 +
560 +static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
561 +{
562 + __u32 *base;
563 +
564 + base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
565 + __raw_writel(data, base);
566 +}
567 +
568 +void atmel_read_status(__u8 cmd, __u8 *data)
569 +{
570 + __u32 opcode;
571 + __u32 value;
572 +
573 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | cmd | g_chipen;
574 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
575 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
576 + while(opcode&0x80000000)
577 + {
578 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
579 + flash_delay();
580 + schedule();
581 + }
582 +
583 + value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
584 + *data = value & 0xff;
585 +}
586 +
587 +void main_memory_page_read(__u8 cmd, __u16 page, __u16 offset, __u8 *data)
588 +{
589 + __u32 opcode;
590 + __u32 address;
591 + __u32 value;
592 +
593 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_4X_DATA | cmd | g_chipen;
594 + address = (page << g_page_addr) + offset;
595 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
596 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
597 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
598 + while(opcode&0x80000000)
599 + {
600 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
601 + flash_delay();
602 + schedule();
603 + }
604 +
605 + value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
606 + *data = value & 0xff;
607 +}
608 +
609 +void buffer_to_main_memory(__u8 cmd, __u16 page)
610 +{
611 + __u32 opcode;
612 + __u32 address;
613 + __u8 status;
614 +
615 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
616 + address = (page << g_page_addr);
617 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
618 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
619 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
620 + while(opcode&0x80000000)
621 + {
622 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
623 + flash_delay();
624 + schedule();
625 + }
626 + atmel_read_status(READ_STATUS_SPI, &status);
627 + while(!(status&0x80))
628 + {
629 + atmel_read_status(READ_STATUS_SPI, &status);
630 + flash_delay();
631 + schedule();
632 + }
633 +
634 +}
635 +
636 +
637 +void atmel_flash_read_page(__u32 address, __u8 *buffer, __u32 len)
638 +{
639 + __u8 byte;
640 + __u16 page, offset;
641 + __u16 i;
642 +
643 + address_to_page(address, &page, &offset);
644 +
645 + for(i=0; i<len; i++,offset++)
646 + {
647 + main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
648 + buffer [i]= byte;
649 + }
650 +}
651 +
652 +void atmel_flash_program_page(__u32 address, __u8 *buffer, __u32 len)
653 +{
654 + __u8 pattern;
655 + __u16 page, offset;
656 + __u32 i;
657 +
658 + address_to_page(address, &page, &offset);
659 + // printk("atmel_flash_program_page: offset %x len %x page %x \n", offset, len, page);
660 +
661 + if(offset)
662 + main_memory_to_buffer(MAIN_MEMORY_TO_BUFFER1,page);
663 +
664 + for(i=0; i<len; i++,offset++)
665 + {
666 + pattern = buffer[i];
667 + atmel_buffer_write(BUFFER1_WRITE,offset,pattern);
668 + }
669 +
670 + // printk("atmel_flash_program_page: offset %x \n", offset);
671 + buffer_to_main_memory(BUFFER1_TO_MAIN_MEMORY, page);
672 + // printk("atmel_flash_program_page: buffer_to_main_memory %x page\n", page);
673 +
674 +}
675 +
676 +
677 +void main_memory_to_buffer(__u8 cmd, __u16 page)
678 +{
679 + __u32 opcode;
680 + __u32 address;
681 + __u8 status;
682 +
683 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
684 + address = (page << g_page_addr);
685 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
686 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
687 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
688 + while(opcode&0x80000000)
689 + {
690 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
691 + flash_delay();
692 + schedule();
693 + }
694 + atmel_read_status(READ_STATUS_SPI, &status);
695 + while(!(status&0x80))
696 + {
697 + atmel_read_status(READ_STATUS_SPI, &status);
698 + flash_delay();
699 + schedule();
700 + }
701 +
702 +}
703 +
704 +void main_memory_page_program(__u8 cmd, __u16 page, __u16 offset, __u8 data)
705 +{
706 + __u32 opcode;
707 + __u32 address;
708 + __u8 status;
709 +
710 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
711 + address = (page << g_page_addr) + offset;
712 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
713 + write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
714 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
715 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
716 + while(opcode&0x80000000)
717 + {
718 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
719 + flash_delay();
720 + schedule();
721 + }
722 + atmel_read_status(READ_STATUS_SPI, &status);
723 + while(!(status&0x80))
724 + {
725 + atmel_read_status(READ_STATUS_SPI, &status);
726 + flash_delay();
727 + schedule();
728 + }
729 +}
730 +
731 +void atmel_buffer_write(__u8 cmd, __u16 offset, __u8 data)
732 +{
733 + __u32 opcode;
734 + __u32 address;
735 +
736 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | cmd | g_chipen;
737 + address = offset;
738 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
739 + write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, data);
740 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
741 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
742 + while(opcode&0x80000000)
743 + {
744 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
745 + flash_delay();
746 + schedule();
747 + }
748 +
749 +}
750 +
751 +void atmel_erase_page(__u8 cmd, __u16 page)
752 +{
753 + __u32 opcode;
754 + __u32 address;
755 + __u8 status;
756 +
757 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
758 + address = (page << g_page_addr);
759 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
760 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
761 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
762 + while(opcode&0x80000000)
763 + {
764 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
765 + flash_delay();
766 + schedule();
767 + }
768 + atmel_read_status(READ_STATUS_SPI, &status);
769 + while(!(status&0x80))
770 + {
771 + atmel_read_status(READ_STATUS_SPI, &status);
772 + flash_delay();
773 + schedule();
774 + }
775 +
776 +}
777 +
778 +void atmel_erase_block(__u8 cmd, __u16 block)
779 +{
780 + __u32 opcode;
781 + __u32 address;
782 + __u8 status;
783 +
784 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | cmd | g_chipen;
785 + address = (block << 13);
786 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
787 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
788 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
789 + while(opcode&0x80000000)
790 + {
791 + opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
792 + flash_delay();
793 + schedule();
794 + }
795 + atmel_read_status(READ_STATUS_SPI, &status);
796 + while(!(status&0x80))
797 + {
798 + atmel_read_status(READ_STATUS_SPI, &status);
799 + flash_delay();
800 + schedule();
801 + }
802 +
803 +}
804 +
805 +void flash_delay(void)
806 +{
807 + int i;
808 +
809 + for(i=0; i<50; i++)
810 + i=i;
811 +}
812 +
813 +
814 +
815 +
816 +__u32 sl2312_read32(struct map_info *map, unsigned long ofs)
817 +{
818 +
819 +#if 0
820 + __u16 page, offset;
821 + __u32 pattern;
822 + __u8 byte, i;
823 +
824 + pattern = 0;
825 + address_to_page(ofs, &page, &offset);
826 + for(i=0; i<4; i++, offset++)
827 + {
828 + pattern = pattern << 8;
829 + main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
830 +//printk("sl2312_read32:: address = %08x data = %c \n",ofs,byte);
831 + pattern += byte;
832 + }
833 + return pattern;
834 +#else
835 + return read_flash_ctrl_reg(ofs);
836 +#endif
837 +
838 +}
839 +
840 +__u8 sl2312_read8(struct map_info *map, unsigned long ofs)
841 +{
842 + __u16 page, offset;
843 + __u8 byte;
844 +
845 + address_to_page(ofs, &page, &offset);
846 + main_memory_page_read(MAIN_MEMORY_PAGE_READ_SPI , page, offset, &byte);
847 + //printk("sl2312_read8:: address = %08x data = %c \n",ofs,byte);
848 + return byte;
849 +
850 +}
851 +
852 +void sl2312_write32(struct map_info *map, __u32 d, unsigned long ofs)
853 +{
854 +#if 0
855 + __u16 page, offset;
856 + __u8 byte, i;
857 +
858 + address_to_page(ofs, &page, &offset);
859 + for(i=0; i<4; i++, offset++)
860 + {
861 + byte = d & 0xff;
862 + main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, byte);
863 + d = d >> 8;
864 +//printk("sl2312_write32:: address = %08x data = %c \n",ofs,byte);
865 + }
866 +#else
867 + write_flash_ctrl_reg(ofs, d);
868 +#endif
869 +}
870 +
871 +void sl2312_write8(struct map_info *map, __u8 d, unsigned long ofs)
872 +{
873 + __u16 page, offset;
874 +
875 + address_to_page(ofs, &page, &offset);
876 + main_memory_page_program(MAIN_MEMORY_PROGRAM_BUFFER1, page, offset, d);
877 +//printk("sl2312_write8:: address = %08x data = %c \n",ofs,d);
878 +
879 +}
880 +
881 +void sl2312_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
882 +{
883 + __u32 size;
884 + __u8 *buffer;
885 + __u32 length;//i, j,
886 +
887 + //printk("sl2312_copy_from:: address = %08x datalen = %d \n",ofs,len);
888 +
889 + length = len;
890 + buffer = (__u8 *)buf;
891 + while(len)
892 + {
893 + size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
894 + if(size > len)
895 + size = len;
896 + atmel_flash_read_page(ofs, buffer, size);
897 + buffer+=size;
898 + ofs+=size;
899 + len -= size;
900 + }
901 +
902 +#if 0
903 + buffer = (__u8 *)buf;
904 + for(i=0; i<length; i+=16)
905 + {
906 + for(j=0; j<16; j++,buffer++)
907 + {
908 + if((i*16+j)<length)
909 + printk("%x ",(int)*buffer);
910 + }
911 + printk("\n");
912 + }
913 +
914 + printk("\n");
915 +#endif
916 +
917 +}
918 +
919 +
920 +void sl2312_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
921 +{
922 + __u32 size;
923 + __u8 *buffer;
924 +
925 + buffer = (__u8 *)buf;
926 + //printk("sl2312_copy_to:offset %x len %x \n", ofs, len);
927 +// printk("sl2312_copy_to:buf is %x \n", (int)buf);
928 +
929 + while(len)
930 + {
931 + size = SPAGE_SIZE - (ofs%SPAGE_SIZE);
932 + if(size > len)
933 + size = len;
934 + atmel_flash_program_page(ofs, buffer, size);
935 + buffer+=size;
936 + ofs+=size;
937 + len-=size;
938 + }
939 +
940 +
941 +}
942 +
943 +
944 +static struct mtd_info *serial_mtd;
945 +
946 +static struct mtd_partition *parsed_parts;
947 +
948 +static struct map_info sl2312_serial_map = {
949 +// name: "SL2312 serial flash",
950 +// size: 4194304, //0x400000,
951 +// //buswidth: 4,
952 +// bankwidth: 4,
953 +// phys: SL2312_FLASH_BASE,
954 +//#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
955 +// //read32: sl2312_read32,
956 +// //read8: sl2312_read8,
957 +// copy_from: sl2312_copy_from,
958 +// //write8: sl2312_write8,
959 +// //write32: sl2312_write32,
960 +// read: sl2312_read32,
961 +// write: sl2312_write32,
962 +// copy_to: sl2312_copy_to
963 +//#endif
964 + .name = "SL2312 serial flash",
965 + .size = 4194304, //0x400000,
966 + //buswidth: 4,
967 + .bankwidth = 4,
968 + .phys = SL2312_FLASH_BASE,
969 +#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
970 + //read32: sl2312_read32,
971 + //read8: sl2312_read8,
972 + .copy_from = sl2312_copy_from,
973 + //write8: sl2312_write8,
974 + //write32: sl2312_write32,
975 + .read = sl2312_read32,
976 + .write = sl2312_write32,
977 + .copy_to = sl2312_copy_to
978 +#endif
979 +};
980 +
981 +
982 +
983 +static struct mtd_partition sl2312_partitions[] = {
984 +
985 +
986 + ///* boot code */
987 + //{ name: "bootloader", offset: 0x00000000, size: 0x20000, },
988 + ///* kernel image */
989 + //{ name: "kerel image", offset: 0x000020000, size: 0x2E0000 },
990 + ///* All else is writable (e.g. JFFS) */
991 + //{ name: "user data", offset: 0x00300000, size: 0x00100000, },
992 + /* boot code */
993 + { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
994 + /* kernel image */
995 + { .name = "kerel image", .offset = 0x000020000, .size = 0xE0000 },
996 + /* All else is writable (e.g. JFFS) */
997 + { .name = "user data", .offset = 0x00100000, .size = 0x00300000, },
998 +
999 +
1000 +};
1001 +
1002 +
1003 +
1004 +static int __init init_sl2312_maps(void)
1005 +{
1006 + int nr_parts = 0;
1007 + struct mtd_partition *parts;
1008 +
1009 + serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
1010 + if (!serial_mtd)
1011 + return NULL;
1012 +
1013 + memset(serial_mtd, 0, sizeof(struct mtd_info));
1014 + //sl2312flash_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
1015 + //sl2312_serial_map.map_priv_1 = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)FLASH_VBASE;
1016 + sl2312_serial_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
1017 + if (!sl2312_serial_map.virt) {
1018 + printk(" failed to ioremap \n");
1019 + return -EIO;
1020 + }
1021 + serial_mtd = do_map_probe("map_serial", &sl2312_serial_map);
1022 + if (serial_mtd) {
1023 + //serial_mtd->module = THIS_MODULE;
1024 + serial_mtd->owner = THIS_MODULE;
1025 +
1026 + }
1027 +
1028 +#ifdef CONFIG_MTD_REDBOOT_PARTS
1029 + nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
1030 + if (nr_parts > 0)
1031 + printk(KERN_NOTICE "Found RedBoot partition table.\n");
1032 + else if (nr_parts < 0)
1033 + printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
1034 +#else
1035 + parsed_parts = sl2312_partitions;
1036 + parts = sl2312_partitions;
1037 + nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
1038 + nr_parts = sizeof(sl2312_partitions)/sizeof(*parsed_parts);
1039 +#endif /* CONFIG_MTD_REDBOOT_PARTS */
1040 +
1041 + if (nr_parts > 0)
1042 + add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
1043 + else
1044 + add_mtd_device(serial_mtd);
1045 +
1046 + return 0;
1047 +}
1048 +
1049 +static void __exit cleanup_sl2312_maps(void)
1050 +{
1051 + if (parsed_parts)
1052 + del_mtd_partitions(serial_mtd);
1053 + else
1054 + del_mtd_device(serial_mtd);
1055 +
1056 + map_destroy(serial_mtd);
1057 +
1058 +
1059 +}
1060 +
1061 +module_init(init_sl2312_maps);
1062 +module_exit(cleanup_sl2312_maps);
1063 +
1064 +
1065 +
1066 +MODULE_LICENSE("GPL");
1067 +MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
1068 +MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
1069 +
1070 --- /dev/null
1071 +++ b/drivers/mtd/maps/sl2312-flash-cfi.c
1072 @@ -0,0 +1,370 @@
1073 +/*======================================================================
1074 +
1075 + This program is free software; you can redistribute it and/or modify
1076 + it under the terms of the GNU General Public License as published by
1077 + the Free Software Foundation; either version 2 of the License, or
1078 + (at your option) any later version.
1079 +
1080 + This program is distributed in the hope that it will be useful,
1081 + but WITHOUT ANY WARRANTY; without even the implied warranty of
1082 + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
1083 + GNU General Public License for more details.
1084 +
1085 + You should have received a copy of the GNU General Public License
1086 + along with this program; if not, write to the Free Software
1087 + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
1088 +======================================================================*/
1089 +
1090 +#include <linux/module.h>
1091 +#include <linux/types.h>
1092 +#include <linux/kernel.h>
1093 +#include <linux/slab.h>
1094 +#include <linux/ioport.h>
1095 +#include <linux/init.h>
1096 +#include <linux/string.h>
1097 +
1098 +#include <linux/mtd/mtd.h>
1099 +#include <linux/mtd/map.h>
1100 +#include <linux/mtd/partitions.h>
1101 +
1102 +#include <asm/hardware.h>
1103 +#include <asm/io.h>
1104 +#include <asm/system.h>
1105 +#include <asm/arch/sl2312.h>
1106 +#include <linux/mtd/kvctl.h>
1107 +#include "sl2312_flashmap.h"
1108 +
1109 +
1110 +//extern int parse_afs_partitions(struct mtd_info *, struct mtd_partition **);
1111 +
1112 +/* the base address of FLASH control register */
1113 +#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
1114 +#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
1115 +
1116 +/* define read/write register utility */
1117 +#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
1118 +#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
1119 +
1120 +/* the offset of FLASH control register */
1121 +enum EMAC_REGISTER {
1122 + FLASH_ID = 0x0000,
1123 + FLASH_STATUS = 0x0008,
1124 + FLASH_TYPE = 0x000c,
1125 + FLASH_ACCESS = 0x0020,
1126 + FLASH_ADDRESS = 0x0024,
1127 + FLASH_DATA = 0x0028,
1128 + FLASH_TIMING = 0x002c,
1129 +};
1130 +
1131 +//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
1132 +//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
1133 +
1134 +//#define FLASH_PART_SIZE 8388608
1135 +
1136 +static unsigned int flash_indirect_access = 0;
1137 +
1138 +#ifdef CONFIG_SL2312_SHARE_PIN
1139 +static unsigned int chip_en = 0x00000000;
1140 +
1141 +void sl2312flash_enable_parallel_flash(void)
1142 +{
1143 + unsigned int reg_val;
1144 +
1145 + reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
1146 + reg_val = reg_val & 0xfffffffd;
1147 + writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
1148 + return;
1149 +}
1150 +
1151 +void sl2312flash_disable_parallel_flash(void)
1152 +{
1153 + unsigned int reg_val;
1154 +
1155 + reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
1156 + reg_val = reg_val | 0x00000002;
1157 + writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
1158 + return;
1159 +}
1160 +#endif
1161 +
1162 +
1163 +static struct map_info sl2312flash_map =
1164 +{
1165 + name: "SL2312 CFI Flash",
1166 + size: FLASH_SIZE,
1167 + bankwidth: 2,
1168 + //bankwidth: 1, //for 8 bits width
1169 + phys: SL2312_FLASH_BASE,
1170 +};
1171 +
1172 +static struct mtd_info *mtd;
1173 +#if 0
1174 +static struct mtd_partition sl2312_partitions[] = {
1175 + /* boot code */
1176 + {
1177 + name: "bootloader",
1178 + offset: 0x00000000,
1179 + size: 0x20000,
1180 +// mask_flags: MTD_WRITEABLE,
1181 + },
1182 + /* kernel image */
1183 + {
1184 + name: "kerel image",
1185 + offset: 0x00020000,
1186 + size: 0x2E0000
1187 + },
1188 + /* All else is writable (e.g. JFFS) */
1189 + {
1190 + name: "user data",
1191 + offset: 0x00300000,
1192 + size: 0x00100000,
1193 + }
1194 +};
1195 +#endif
1196 +
1197 +
1198 +
1199 +static int __init sl2312flash_init(void)
1200 +{
1201 + struct mtd_partition *parts;
1202 + int nr_parts = 0;
1203 + int ret;
1204 +#ifndef CONFIG_SL2312_SHARE_PIN
1205 + unsigned int reg_val;
1206 +#endif
1207 +
1208 + printk("SL2312 MTD Driver Init.......\n");
1209 +
1210 +#ifndef CONFIG_SL2312_SHARE_PIN
1211 + /* enable flash */
1212 + reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
1213 + reg_val = reg_val & 0xfffffffd;
1214 + writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
1215 +#else
1216 + sl2312flash_enable_parallel_flash(); /* enable Parallel FLASH */
1217 +#endif
1218 + FLASH_WRITE_REG(FLASH_ACCESS,0x00004000); /* parallel flash direct access mode */
1219 + ret = FLASH_READ_REG(FLASH_ACCESS);
1220 + if (ret == 0x00004000)
1221 + {
1222 + flash_indirect_access = 0; /* parallel flash direct access */
1223 + }
1224 + else
1225 + {
1226 + flash_indirect_access = 1; /* parallel flash indirect access */
1227 + }
1228 +
1229 + /*
1230 + * Also, the CFI layer automatically works out what size
1231 + * of chips we have, and does the necessary identification
1232 + * for us automatically.
1233 + */
1234 +#ifdef CONFIG_GEMINI_IPI
1235 + sl2312flash_map.virt = FLASH_VBASE;//(unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
1236 +#else
1237 + sl2312flash_map.virt = (unsigned int *)ioremap(SL2312_FLASH_BASE, FLASH_SIZE);
1238 +#endif
1239 + //printk("sl2312flash_map.virt = %08x\n",(unsigned int)sl2312flash_map.virt);
1240 +
1241 +// simple_map_init(&sl2312flash_map);
1242 +
1243 + mtd = do_map_probe("cfi_probe", &sl2312flash_map);
1244 + if (!mtd)
1245 + {
1246 +#ifdef CONFIG_SL2312_SHARE_PIN
1247 + sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
1248 +#endif
1249 + return -ENXIO;
1250 + }
1251 + mtd->owner = THIS_MODULE;
1252 +// mtd->erase = flash_erase;
1253 +// mtd->read = flash_read;
1254 +// mtd->write = flash_write;
1255 +
1256 + parts = sl2312_partitions;
1257 + nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
1258 + ret = add_mtd_partitions(mtd, parts, nr_parts);
1259 + /*If we got an error, free all resources.*/
1260 + if (ret < 0) {
1261 + del_mtd_partitions(mtd);
1262 + map_destroy(mtd);
1263 + }
1264 +#ifdef CONFIG_SL2312_SHARE_PIN
1265 + sl2312flash_disable_parallel_flash(); /* disable Parallel FLASH */
1266 +#endif
1267 + printk("SL2312 MTD Driver Init Success ......\n");
1268 + return ret;
1269 +}
1270 +
1271 +static void __exit sl2312flash_exit(void)
1272 +{
1273 + if (mtd) {
1274 + del_mtd_partitions(mtd);
1275 + map_destroy(mtd);
1276 + }
1277 +
1278 + if (sl2312flash_map.virt) {
1279 + iounmap((void *)sl2312flash_map.virt);
1280 + sl2312flash_map.virt = 0;
1281 + }
1282 +}
1283 +
1284 +char chrtohex(char c)
1285 +{
1286 + char val;
1287 + if ((c >= '0') && (c <= '9'))
1288 + {
1289 + val = c - '0';
1290 + return val;
1291 + }
1292 + else if ((c >= 'a') && (c <= 'f'))
1293 + {
1294 + val = 10 + (c - 'a');
1295 + return val;
1296 + }
1297 + else if ((c >= 'A') && (c <= 'F'))
1298 + {
1299 + val = 10 + (c - 'A');
1300 + return val;
1301 + }
1302 + printk("<1>Error number\n");
1303 + return 0;
1304 +}
1305 +
1306 +
1307 +int get_vlaninfo(vlaninfo* vlan)
1308 +{
1309 + vctl_mheader head;
1310 + vctl_entry entry;
1311 + struct mtd_info *mymtd=NULL;
1312 + int i, j, loc = 0;
1313 + char *payload=0, *tmp1, *tmp2, tmp3[9];
1314 + size_t retlen;
1315 +
1316 + #ifdef CONFIG_SL2312_SHARE_PIN
1317 + sl2312flash_enable_parallel_flash();
1318 + #endif
1319 + for(i=0;i<MAX_MTD_DEVICES;i++)
1320 + {
1321 + mymtd=get_mtd_device(NULL,i);
1322 + // printk("mymtd->name: %s\n", mymtd->name);
1323 + if(mymtd && !strcmp(mymtd->name,"VCTL"))
1324 + {
1325 + // printk("%s\n", mymtd->name);
1326 + break;
1327 + }
1328 + }
1329 + if( i >= MAX_MTD_DEVICES)
1330 + {
1331 + printk("Can't find version control\n");
1332 + #ifdef CONFIG_SL2312_SHARE_PIN
1333 + sl2312flash_disable_parallel_flash();
1334 + #endif
1335 + return 0;
1336 + }
1337 +
1338 + if (!mymtd | !mymtd->read)
1339 + {
1340 + printk("<1>Can't read Version Configuration\n");
1341 + #ifdef CONFIG_SL2312_SHARE_PIN
1342 + sl2312flash_disable_parallel_flash();
1343 + #endif
1344 + return 0;
1345 + }
1346 +
1347 + mymtd->read(mymtd, 0, VCTL_HEAD_SIZE, &retlen, (u_char*)&head);
1348 + // printk("entry header: %c%c%c%c\n", head.header[0], head.header[1], head.header[2], head.header[3]);
1349 + // printk("entry number: %x\n", head.entry_num);
1350 + if ( strncmp(head.header, "FLFM", 4) )
1351 + {
1352 + printk("VCTL is a erase block\n");
1353 + #ifdef CONFIG_SL2312_SHARE_PIN
1354 + sl2312flash_disable_parallel_flash();
1355 + #endif
1356 + return 0;
1357 + }
1358 + loc += retlen;
1359 + for (i = 0; i < head.entry_num; i++)
1360 + {
1361 + mymtd->read(mymtd, loc, VCTL_ENTRY_LEN, &retlen, (u_char*)&entry);
1362 + // printk("type: %x\n", entry.type);
1363 + // printk("size: %x\n", entry.size);
1364 + strncpy(tmp3, entry.header, 4);
1365 + if (entry.type == VCT_VLAN)
1366 + {
1367 + for (j = 0; j < 6 ; j++)
1368 + {
1369 + vlan[0].mac[j] = 0;
1370 + vlan[1].mac[j] = 0;
1371 + }
1372 + vlan[0].vlanid = 1;
1373 + vlan[1].vlanid = 2;
1374 + vlan[0].vlanmap = 0x7F;
1375 + vlan[1].vlanmap = 0x80;
1376 +
1377 + payload = (char *)kmalloc(entry.size - VCTL_ENTRY_LEN, GFP_KERNEL);
1378 + loc += VCTL_ENTRY_LEN;
1379 + mymtd->read(mymtd, loc, entry.size - VCTL_ENTRY_LEN, &retlen, payload);
1380 + // printk("%s\n", payload);
1381 + tmp1 = strstr(payload, "MAC1:");
1382 + tmp2 = strstr(payload, "MAC2:");
1383 + if(!tmp1||!tmp2){
1384 + kfree(payload);
1385 + #ifdef CONFIG_SL2312_SHARE_PIN
1386 + sl2312flash_disable_parallel_flash();
1387 + #endif
1388 + printk("Error VCTL format!!\n");
1389 + return 0;
1390 + }
1391 + tmp1 += 7;
1392 + tmp2 += 7;
1393 +
1394 +
1395 + for (j = 0; j < 6; j++)
1396 + {
1397 + vlan[0].mac[j] = chrtohex(tmp1[2*j])*16 + chrtohex(tmp1[(2*j)+1]);
1398 + vlan[1].mac[j] = chrtohex(tmp2[2*j])*16 + chrtohex(tmp2[(2*j)+1]);
1399 + }
1400 + tmp1 = strstr(payload, "ID1:");
1401 + tmp2 = strstr(payload, "ID2:");
1402 + tmp1 += 4;
1403 + tmp2 += 4;
1404 + vlan[0].vlanid = tmp1[0] - '0';
1405 + vlan[1].vlanid = tmp2[0] - '0';
1406 + tmp1 = strstr(payload, "MAP1:");
1407 + tmp2 = strstr(payload, "MAP2:");
1408 + tmp1 += 7;
1409 + tmp2 += 7;
1410 + vlan[0].vlanmap = chrtohex(tmp1[0]) * 16 + chrtohex(tmp1[1]);
1411 + vlan[1].vlanmap = chrtohex(tmp2[0]) * 16 + chrtohex(tmp2[1]);
1412 + // printk("Vlan1 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[0].vlanid, vlan[0].vlanmap, vlan[0].mac[0], vlan[0].mac[1], vlan[0].mac[2], vlan[0].mac[3], vlan[0].mac[4], vlan[0].mac[5]);
1413 + // printk("Vlan2 id:%x map:%02x mac:%x%x%x%x%x%x\n", vlan[1].vlanid, vlan[1].vlanmap, vlan[1].mac[0], vlan[1].mac[1], vlan[1].mac[2], vlan[1].mac[3], vlan[1].mac[4], vlan[1].mac[5]);
1414 + break;
1415 + }
1416 + loc += entry.size;
1417 + }
1418 + if ( entry.type == VCT_VLAN )
1419 + {
1420 + #ifdef CONFIG_SL2312_SHARE_PIN
1421 + sl2312flash_disable_parallel_flash();
1422 + #endif
1423 + kfree(payload);
1424 + return 1;
1425 + }
1426 + if (i >= head.entry_num)
1427 + printk("Can't find vlan information\n");
1428 + #ifdef CONFIG_SL2312_SHARE_PIN
1429 + sl2312flash_disable_parallel_flash();
1430 + #endif
1431 + return 0;
1432 +}
1433 +
1434 +EXPORT_SYMBOL(get_vlaninfo);
1435 +
1436 +
1437 +module_init(sl2312flash_init);
1438 +module_exit(sl2312flash_exit);
1439 +
1440 +MODULE_AUTHOR("Storlink Ltd");
1441 +MODULE_DESCRIPTION("CFI map driver");
1442 +MODULE_LICENSE("GPL");
1443 --- /dev/null
1444 +++ b/drivers/mtd/maps/sl2312-flash-m25p80.c
1445 @@ -0,0 +1,498 @@
1446 +/*
1447 + * $Id: sl2312-flash-m25p80.c,v 1.2 2006/06/02 08:46:02 middle Exp $
1448 + *
1449 + * Flash and EPROM on Hitachi Solution Engine and similar boards.
1450 + *
1451 + * (C) 2001 Red Hat, Inc.
1452 + *
1453 + * GPL'd
1454 + */
1455 +
1456 +#include <linux/module.h>
1457 +#include <linux/types.h>
1458 +#include <linux/kernel.h>
1459 +
1460 +#include <asm/io.h>
1461 +#include <linux/mtd/mtd.h>
1462 +#include <linux/mtd/map.h>
1463 +#include <linux/mtd/partitions.h>
1464 +#include <asm/hardware.h>
1465 +
1466 +#include <asm/arch/sl2312.h>
1467 +#include <asm/arch/flash.h>
1468 +#include <linux/init.h> //add
1469 +#define g_chipen SERIAL_FLASH_CHIP0_EN //ST
1470 +
1471 +//static int m25p80_page_program(__u32 address, __u8 data, __u32 schip_en);
1472 +static void m25p80_write_cmd(__u8 cmd, __u32 schip_en);
1473 +extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts);
1474 +
1475 +
1476 +static __u32 read_flash_ctrl_reg(__u32 ofs)
1477 +{
1478 + __u32 *base;
1479 +
1480 + base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
1481 + return __raw_readl(base);
1482 +}
1483 +
1484 +static void write_flash_ctrl_reg(__u32 ofs,__u32 data)
1485 +{
1486 + __u32 *base;
1487 +
1488 + base = (__u32 *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE + ofs));
1489 + __raw_writel(data, base);
1490 +}
1491 +
1492 +static void m25p80_read(__u32 address, __u8 *data, __u32 schip_en)
1493 +{
1494 + __u32 opcode,status;
1495 + __u32 value;
1496 +
1497 + //opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ;
1498 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_READ;
1499 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
1500 +
1501 + opcode|=g_chipen;
1502 +
1503 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1504 + status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1505 + while(status&0x80000000)
1506 + {
1507 + status=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1508 + flash_delay();
1509 + schedule();
1510 + }
1511 +
1512 + value=read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1513 + *data = value & 0xff;
1514 +}
1515 +
1516 +static int m25p80_page_program(__u32 address, __u8 *data, __u32 schip_en)
1517 +{
1518 + __u32 opcode;
1519 + __u32 status;
1520 + __u32 tmp;
1521 + int res = FLASH_ERR_OK;
1522 + //volatile FLASH_DATA_T* data_ptr = (volatile FLASH_DATA_T*) data;
1523 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
1524 +
1525 + opcode|=g_chipen;
1526 +
1527 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1528 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1529 + while(tmp&0x80000000)
1530 + {
1531 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1532 + flash_delay();
1533 + schedule();
1534 + }
1535 + //middle delay_ms(130);
1536 + status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1537 + if((status&0x02)==0x02)
1538 + {
1539 + //middle delay_ms(100);
1540 + m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
1541 + }
1542 +
1543 +
1544 + m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
1545 + ////middle delay_ms(10);
1546 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS_DATA | M25P80_PAGE_PROGRAM;
1547 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
1548 + write_flash_ctrl_reg(FLASH_WRITE_DATA_OFFSET, *data);
1549 +
1550 + //status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1551 + //while(status!=data)
1552 + //{
1553 + // status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1554 + // //middle delay_ms(10);
1555 + //}
1556 +
1557 + opcode|=g_chipen;
1558 +
1559 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1560 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1561 + while(tmp&0x80000000)
1562 + {
1563 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1564 + flash_delay();
1565 + schedule();
1566 + }
1567 + //opcode=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1568 +
1569 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
1570 +
1571 + opcode|=g_chipen;
1572 +
1573 +
1574 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1575 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1576 + while(tmp&0x80000000)
1577 + {
1578 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1579 + flash_delay();
1580 + schedule();
1581 + }
1582 + status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1583 + //while(status&0xfd)
1584 + while(status&0x01)
1585 + {
1586 + //if((status&0x9c)!=0)
1587 + // printf(" m25p80_page_program Protect Status = %x\n",status);
1588 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1589 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1590 + while(tmp&0x80000000)
1591 + {
1592 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1593 + flash_delay();
1594 + schedule();
1595 + }
1596 + status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1597 + flash_delay();
1598 + schedule();
1599 + //middle delay_ms(50);
1600 + }
1601 + //printf("status = %x, data = %x\n",status,data);
1602 + if((status&0x02)==0x02)
1603 + {
1604 + //middle delay_ms(100);
1605 + m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
1606 + }
1607 + //};//while (len > 0)
1608 + return res;
1609 +}
1610 +
1611 +void m25p80_copy_from(struct map_info *map, void *buf, unsigned long ofs, ssize_t len)
1612 +{
1613 +// __u32 size;
1614 + __u8 *buffer;
1615 + __u32 length;//i, j,
1616 +
1617 + length = len;
1618 + buffer = (__u8 *)buf;
1619 + while(len)
1620 + {
1621 + m25p80_read(ofs, buffer, g_chipen);
1622 + buffer++;
1623 + ofs++;
1624 + len --;
1625 + } ;
1626 +
1627 +}
1628 +
1629 +__u32 m25p80_read32(struct map_info *map, unsigned long ofs)
1630 +{
1631 +
1632 + return read_flash_ctrl_reg(ofs);
1633 +
1634 +
1635 +}
1636 +
1637 +void m25p80_write32(struct map_info *map, __u32 d, unsigned long ofs)
1638 +{
1639 +
1640 + write_flash_ctrl_reg(ofs, d);
1641 +
1642 +}
1643 +
1644 +void m25p80_copy_to(struct map_info *map, unsigned long ofs, void *buf, ssize_t len)
1645 +{
1646 + __u32 size, i, ret;
1647 +
1648 + while(len > 0)
1649 + {
1650 + if(len >= M25P80_PAGE_SIZE)
1651 + size = M25P80_PAGE_SIZE;
1652 + else
1653 + size = len;
1654 +
1655 + for(i=0;i<size;i++)
1656 + {
1657 + ret = m25p80_page_program( (ofs+i), (buf+i), g_chipen);
1658 + }
1659 + buf+=M25P80_PAGE_SIZE;
1660 + ofs+=M25P80_PAGE_SIZE;
1661 + len-=M25P80_PAGE_SIZE;
1662 +
1663 + };
1664 +
1665 +
1666 +}
1667 +
1668 +static struct mtd_info *serial_mtd;
1669 +
1670 +static struct mtd_partition *parsed_parts;
1671 +
1672 +static struct map_info m25p80_map = {
1673 +
1674 + .name = "SL2312 serial flash m25p80",
1675 + .size = 1048576, //0x100000,
1676 + //buswidth: 4,
1677 + .bankwidth = 4,
1678 + .phys = SL2312_FLASH_BASE,
1679 +#ifdef CONFIG_MTD_COMPLEX_MAPPINGS
1680 + .copy_from = m25p80_copy_from,
1681 + .read = m25p80_read32,
1682 + .write = m25p80_write32,
1683 + .copy_to = m25p80_copy_to
1684 +#endif
1685 +};
1686 +
1687 +
1688 +
1689 +static struct mtd_partition m25p80_partitions[] = {
1690 +
1691 + /* boot code */
1692 + { .name = "bootloader", .offset = 0x00000000, .size = 0x20000, },
1693 + /* kernel image */
1694 + { .name = "kerel image", .offset = 0x000020000, .size = 0xC0000 },
1695 + /* All else is writable (e.g. JFFS) */
1696 + { .name = "user data", .offset = 0x000E0000, .size = 0x00010000, },
1697 +
1698 +
1699 +};
1700 +
1701 +void flash_delay()
1702 +{
1703 + int i,j;
1704 + for(i=0;i<0x100;i++)
1705 + j=i*3+5;
1706 +}
1707 +
1708 +int m25p80_sector_erase(__u32 address, __u32 schip_en)
1709 +{
1710 + __u32 opcode;
1711 + __u32 status;
1712 + __u32 tmp;
1713 + int res = FLASH_ERR_OK;
1714 + //printf("\n-->m25p80_sector_erase");
1715 + if(address >= FLASH_START)
1716 + address-=FLASH_START;
1717 +
1718 + m25p80_write_cmd(M25P80_WRITE_ENABLE, schip_en);
1719 + //printf("\n m25p80_sector_erase : after we-en");
1720 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_SHIFT_ADDRESS | M25P80_SECTOR_ERASE;
1721 + write_flash_ctrl_reg(FLASH_ADDRESS_OFFSET, address);
1722 + #ifdef MIDWAY_DIAG
1723 + opcode|=schip_en;
1724 + #endif
1725 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1726 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1727 + while(tmp&0x80000000)
1728 + {
1729 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1730 + flash_delay();
1731 + schedule();
1732 + }
1733 +
1734 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
1735 + #ifdef MIDWAY_DIAG
1736 + opcode|=schip_en;
1737 + #endif
1738 +
1739 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1740 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1741 + while(tmp&0x80000000)
1742 + {
1743 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1744 + flash_delay();
1745 + schedule();
1746 + }
1747 + status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1748 + //while(status&0xfd)
1749 + while(status&0x01)
1750 + {
1751 + //if((status&0x9c)!=0)
1752 + // printf(" m25p80_sector_erase Protect Status = %x\n",status);
1753 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1754 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1755 + while(tmp&0x80000000)
1756 + {
1757 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1758 + flash_delay();
1759 + schedule();
1760 + }
1761 + status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1762 + flash_delay();
1763 + schedule();
1764 + //middle delay_ms(50);
1765 + }
1766 + if((status&0x02)==0x02)
1767 + {
1768 + //middle delay_ms(100);
1769 + m25p80_write_cmd(M25P80_WRITE_DISABLE, schip_en);
1770 + }
1771 + //printf("\n<--m25p80_sector_erase");
1772 + return res;
1773 +}
1774 +
1775 +static void m25p80_write_cmd(__u8 cmd, __u32 schip_en)
1776 +{
1777 + __u32 opcode,tmp;
1778 + __u32 status;
1779 +
1780 +
1781 +
1782 +
1783 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE | cmd;
1784 +
1785 + opcode|=g_chipen;
1786 +
1787 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1788 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1789 + while(tmp&0x80000000)
1790 + {
1791 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1792 + flash_delay();
1793 + schedule();
1794 + }
1795 + //////
1796 + opcode = 0x80000000 | FLASH_ACCESS_ACTION_OPCODE_DATA | M25P80_READ_STATUS;
1797 +
1798 + opcode|=g_chipen;
1799 +
1800 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1801 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1802 + while(tmp&0x80000000)
1803 + {
1804 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1805 + flash_delay();
1806 + schedule();
1807 + }
1808 + //middle delay_ms(130);
1809 + status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1810 + //printf("\ncmd =%x status = %x",cmd,status);
1811 + if(cmd==M25P80_WRITE_ENABLE)
1812 + {
1813 + //printf("\n**-->enable** status = %x",status);
1814 + //middle delay_ms(100);
1815 + while((status&0x03) != 2)
1816 + {
1817 + //if((status&0x9c)!=0)
1818 + // printf(" M25P80_WRITE_ENABLE Protect Status = %x\n",status);
1819 +
1820 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1821 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1822 + while(tmp&0x80000000)
1823 + {
1824 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1825 + //flash_delay();
1826 + }
1827 + status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1828 + //printf("\n**enable** status = %x",status);
1829 + flash_delay();
1830 + schedule();
1831 + //middle delay_ms(100);
1832 + }
1833 + }
1834 + else if(cmd==M25P80_WRITE_DISABLE)
1835 + {
1836 + //while((status&0x03) == 2)
1837 + // printf("\n**disable** status = %x",status);
1838 + //middle delay_ms(100);
1839 + while((status&0x03) != 0)
1840 + {
1841 + //m25p80_write_status((status&0xfd),schip_en);
1842 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1843 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1844 + while(tmp&0x80000000)
1845 + {
1846 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1847 + flash_delay();
1848 + schedule();
1849 + }
1850 + status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1851 + //printf("\n**disable** status = %x",status);
1852 + flash_delay();
1853 + schedule();
1854 + //middle delay_ms(50);
1855 + }
1856 + }
1857 + else
1858 + {
1859 + //while((status&0x01) !=0)
1860 + while((status&0x01) !=0)
1861 + {
1862 + write_flash_ctrl_reg(FLASH_ACCESS_OFFSET, opcode);
1863 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1864 + while(tmp&0x80000000)
1865 + {
1866 + tmp=read_flash_ctrl_reg(FLASH_ACCESS_OFFSET);
1867 + flash_delay();
1868 + schedule();
1869 + }
1870 + status = read_flash_ctrl_reg(FLASH_READ_DATA_OFFSET);
1871 + flash_delay();
1872 + schedule();
1873 + //middle delay_ms(50);
1874 + }
1875 + }
1876 + //////
1877 +
1878 + //printf("\n<-- status = %x",status);
1879 +}
1880 +
1881 +static int __init init_sl2312_m25p80(void)
1882 +{
1883 + int nr_parts = 0;
1884 + struct mtd_partition *parts;
1885 +
1886 + serial_mtd = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
1887 + if (!serial_mtd)
1888 + return NULL;
1889 +
1890 + memset(serial_mtd, 0, sizeof(struct mtd_info));
1891 + m25p80_map.virt = (unsigned long)ioremap(SL2312_FLASH_BASE, SFLASH_SIZE);//(unsigned long)ioremap(FLASH_START, SFLASH_SIZE);
1892 + if (!m25p80_map.virt) {
1893 + printk(" failed to ioremap \n");
1894 + return -EIO;
1895 + }
1896 + serial_mtd = do_map_probe("map_serial", &m25p80_map);
1897 + if (serial_mtd) {
1898 + serial_mtd->owner = THIS_MODULE;
1899 +
1900 + }
1901 +
1902 +#ifdef CONFIG_MTD_REDBOOT_PARTS
1903 + nr_parts = parse_redboot_partitions(serial_mtd, &parsed_parts);
1904 + if (nr_parts > 0)
1905 + printk(KERN_NOTICE "Found RedBoot partition table.\n");
1906 + else if (nr_parts < 0)
1907 + printk(KERN_NOTICE "Error looking for RedBoot partitions.\n");
1908 +#else
1909 + parsed_parts = m25p80_partitions;
1910 + parts = m25p80_partitions;
1911 + nr_parts = sizeof(m25p80_partitions)/sizeof(*parts);
1912 + nr_parts = sizeof(m25p80_partitions)/sizeof(*parsed_parts);
1913 +#endif /* CONFIG_MTD_REDBOOT_PARTS */
1914 +
1915 + if (nr_parts > 0)
1916 + add_mtd_partitions(serial_mtd, parsed_parts, nr_parts);
1917 + else
1918 + add_mtd_device(serial_mtd);
1919 +
1920 + return 0;
1921 +}
1922 +
1923 +static void __exit cleanup_sl2312_m25p80(void)
1924 +{
1925 + if (parsed_parts)
1926 + del_mtd_partitions(serial_mtd);
1927 + else
1928 + del_mtd_device(serial_mtd);
1929 +
1930 + map_destroy(serial_mtd);
1931 +
1932 +
1933 +}
1934 +
1935 +module_init(init_sl2312_m25p80);
1936 +module_exit(cleanup_sl2312_m25p80);
1937 +
1938 +
1939 +
1940 +MODULE_LICENSE("GPL");
1941 +MODULE_AUTHOR("Plus Chen <plus@storlink.com.tw>");
1942 +MODULE_DESCRIPTION("MTD map driver for Storlink Sword boards");
1943 +
1944 --- /dev/null
1945 +++ b/drivers/mtd/maps/sl2312_flashmap.h
1946 @@ -0,0 +1,21 @@
1947 +/*
1948 + * Please note that the name are used in mkflash script. Therefore
1949 + * don't change them. If you want to add different partitions, you
1950 + * will need to modify mkflash script as well so that the end image
1951 + * is what you include here!
1952 + *
1953 + * Also, the 7th item is always the size, so please don't add extra
1954 + * spaces in the name or other items.
1955 + *
1956 + * - Alan
1957 + */
1958 +
1959 +static struct mtd_partition sl2312_partitions[] = {
1960 + { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
1961 + { name: "kernel", offset: 0x00020000, size: 0x00100000, },
1962 + { name: "rootfs", offset: 0x00120000, size: 0x00500000, },
1963 + { name: "rootfs_data", offset: 0x00620000, size: 0x001A0000, },
1964 + { name: "VCTL", offset: 0x007C0000, size: 0x00010000, },
1965 + { name: "cfg", offset: 0x007D0000, size: 0x00020000, },
1966 + { name: "FIS directory", offset: 0x007F0000, size: 0x00010000, }
1967 +};
1968 --- /dev/null
1969 +++ b/drivers/mtd/maps/sl2312_flashmap.h.16MB
1970 @@ -0,0 +1,21 @@
1971 +/*
1972 + * Please note that the name are used in mkflash script. Therefore
1973 + * don't change them. If you want to add different partitions, you
1974 + * will need to modify mkflash script as well so that the end image
1975 + * is what you include here!
1976 + *
1977 + * Also, the 7th item is always the size, so please don't add extra
1978 + * spaces in the name or other items.
1979 + *
1980 + * - Alan
1981 + */
1982 +
1983 +static struct mtd_partition sl2312_partitions[] = {
1984 + { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
1985 + { name: "Kernel", offset: 0x00020000, size: 0x00300000, },
1986 + { name: "Ramdisk", offset: 0x00320000, size: 0x00600000, },
1987 + { name: "Application", offset: 0x00920000, size: 0x00600000, },
1988 + { name: "VCTL", offset: 0x00F20000, size: 0x00020000, },
1989 + { name: "CurConf", offset: 0x00F40000, size: 0x000A0000, },
1990 + { name: "FIS directory", offset: 0x00FE0000, size: 0x00020000, }
1991 +};
1992 --- /dev/null
1993 +++ b/drivers/mtd/maps/sl2312_flashmap.h.8MB
1994 @@ -0,0 +1,21 @@
1995 +/*
1996 + * Please note that the name are used in mkflash script. Therefore
1997 + * don't change them. If you want to add different partitions, you
1998 + * will need to modify mkflash script as well so that the end image
1999 + * is what you include here!
2000 + *
2001 + * Also, the 7th item is always the size, so please don't add extra
2002 + * spaces in the name or other items.
2003 + *
2004 + * - Alan
2005 + */
2006 +
2007 +static struct mtd_partition sl2312_partitions[] = {
2008 + { name: "RedBoot", offset: 0x00000000, size: 0x00020000, },
2009 + { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
2010 + { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
2011 + { name: "Application", offset: 0x004A0000, size: 0x00300000, },
2012 + { name: "VCTL", offset: 0x007A0000, size: 0x00020000, },
2013 + { name: "CurConf", offset: 0x007C0000, size: 0x00020000, },
2014 + { name: "FIS directory", offset: 0x007E0000, size: 0x00020000, }
2015 +};
2016 --- a/drivers/mtd/mtdchar.c
2017 +++ b/drivers/mtd/mtdchar.c
2018 @@ -59,6 +59,77 @@
2019 enum mtd_file_modes mode;
2020 };
2021
2022 +/***********************************************************************
2023 +/* Storlink SoC -- flash
2024 +/***********************************************************************/
2025 +#ifdef CONFIG_SL2312_SHARE_PIN
2026 +unsigned int share_pin_flag=0; // bit0:FLASH, bit1:UART, bit2:EMAC, bit3-4:IDE
2027 +unsigned int check_sleep_flag=0; // bit0:FLASH, bit1:IDE
2028 +static spinlock_t sl2312_flash_lock = SPIN_LOCK_UNLOCKED;
2029 +EXPORT_SYMBOL(share_pin_flag);
2030 +int dbg=0;
2031 +DECLARE_WAIT_QUEUE_HEAD(wq);
2032 +extern struct wait_queue_head_t *flash_wait;
2033 +unsigned int flash_req=0;
2034 +void mtd_lock()
2035 +{
2036 + struct task_struct *tsk = current;
2037 + unsigned int value ;
2038 + unsigned long flags;
2039 + flash_req = 1;
2040 + DECLARE_WAITQUEUE(wait, tsk);
2041 + add_wait_queue(&wq, &wait);
2042 + for(;;)
2043 + {
2044 + set_task_state(tsk, TASK_INTERRUPTIBLE);
2045 + spin_lock_irqsave(&sl2312_flash_lock,flags);
2046 + if((share_pin_flag&0x1E)){//||(check_sleep_flag&0x00000002)) {
2047 + spin_unlock_irqrestore(&sl2312_flash_lock, flags);
2048 + check_sleep_flag |= 0x00000001;
2049 + if(dbg)
2050 + printk("mtd yield %x %x\n",share_pin_flag,check_sleep_flag);
2051 + wake_up_interruptible(&flash_wait);
2052 + schedule();
2053 + }
2054 + else {
2055 + check_sleep_flag &= ~0x01;
2056 + share_pin_flag |= 0x00000001 ; // set share pin flag
2057 + spin_unlock_irqrestore(&sl2312_flash_lock, flags);
2058 + value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
2059 + value = value & (~PFLASH_SHARE_BIT) ;
2060 + writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
2061 + if(dbg)
2062 + printk("mtd Go %x %x\n",share_pin_flag,check_sleep_flag);
2063 + tsk->state = TASK_RUNNING;
2064 + remove_wait_queue(&wq, &wait);
2065 + return ;
2066 + }
2067 + }
2068 +}
2069 +
2070 +void mtd_unlock()
2071 +{
2072 + unsigned int value ;
2073 + unsigned long flags;
2074 +
2075 + spin_lock_irqsave(&sl2312_flash_lock,flags); // Disable IRQ
2076 + value = readl(IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
2077 + value = value | PFLASH_SHARE_BIT ; // Disable Flash PADs
2078 + writel(value,IO_ADDRESS((SL2312_GLOBAL_BASE+GLOBAL_MISC_REG)));
2079 + share_pin_flag &= ~(0x00000001); // clear share pin flag
2080 + check_sleep_flag &= ~0x00000001;
2081 + spin_unlock_irqrestore(&sl2312_flash_lock, flags); // Restore IRQ
2082 + if (check_sleep_flag & 0x00000002)
2083 + {
2084 + check_sleep_flag &= ~(0x00000002);
2085 + wake_up_interruptible(&flash_wait);
2086 + }
2087 + DEBUG(MTD_DEBUG_LEVEL0, "Flash Unlock...\n");
2088 + flash_req = 0;
2089 +}
2090 +#endif
2091 +/***********************************************************************/
2092 +
2093 static loff_t mtd_lseek (struct file *file, loff_t offset, int orig)
2094 {
2095 struct mtd_file_info *mfi = file->private_data;
2096 @@ -162,13 +233,21 @@
2097 int len;
2098 char *kbuf;
2099
2100 +#ifdef CONFIG_SL2312_SHARE_PIN
2101 + mtd_lock(); // sl2312 share pin lock
2102 +#endif
2103 +
2104 DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n");
2105
2106 if (*ppos + count > mtd->size)
2107 count = mtd->size - *ppos;
2108
2109 - if (!count)
2110 + if (!count){
2111 +#ifdef CONFIG_SL2312_SHARE_PIN
2112 + mtd_unlock(); // sl2312 share pin lock
2113 +#endif
2114 return 0;
2115 + }
2116
2117 /* FIXME: Use kiovec in 2.5 to lock down the user's buffers
2118 and pass them directly to the MTD functions */
2119 @@ -178,8 +257,12 @@
2120 else
2121 kbuf=kmalloc(count, GFP_KERNEL);
2122
2123 - if (!kbuf)
2124 + if (!kbuf) {
2125 +#ifdef CONFIG_SL2312_SHARE_PIN
2126 + mtd_unlock(); // sl2312 share pin lock
2127 +#endif
2128 return -ENOMEM;
2129 + }
2130
2131 while (count) {
2132
2133 @@ -224,6 +307,9 @@
2134 *ppos += retlen;
2135 if (copy_to_user(buf, kbuf, retlen)) {
2136 kfree(kbuf);
2137 +#ifdef CONFIG_SL2312_SHARE_PIN
2138 + mtd_unlock(); // sl2312 share pin lock
2139 +#endif
2140 return -EFAULT;
2141 }
2142 else
2143 @@ -235,13 +321,19 @@
2144 count = 0;
2145 }
2146 else {
2147 - kfree(kbuf);
2148 + kfree(kbuf);
2149 +#ifdef CONFIG_SL2312_SHARE_PIN
2150 + mtd_unlock(); // sl2312 share pin lock
2151 +#endif
2152 return ret;
2153 }
2154
2155 }
2156
2157 kfree(kbuf);
2158 +#ifdef CONFIG_SL2312_SHARE_PIN
2159 + mtd_unlock(); // sl2312 share pin lock
2160 +#endif
2161 return total_retlen;
2162 } /* mtd_read */
2163
2164 @@ -255,24 +347,40 @@
2165 int ret=0;
2166 int len;
2167
2168 +#ifdef CONFIG_SL2312_SHARE_PIN
2169 + mtd_lock(); // sl2312 share pin lock
2170 +#endif
2171 +
2172 DEBUG(MTD_DEBUG_LEVEL0,"MTD_write\n");
2173
2174 - if (*ppos == mtd->size)
2175 + if (*ppos == mtd->size){
2176 +#ifdef CONFIG_SL2312_SHARE_PIN
2177 + mtd_unlock(); // sl2312 share pin lock
2178 +#endif
2179 return -ENOSPC;
2180 + }
2181
2182 if (*ppos + count > mtd->size)
2183 count = mtd->size - *ppos;
2184
2185 - if (!count)
2186 + if (!count){
2187 +#ifdef CONFIG_SL2312_SHARE_PIN
2188 + mtd_unlock(); // sl2312 share pin lock
2189 +#endif
2190 return 0;
2191 + }
2192
2193 if (count > MAX_KMALLOC_SIZE)
2194 kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL);
2195 else
2196 kbuf=kmalloc(count, GFP_KERNEL);
2197
2198 - if (!kbuf)
2199 + if (!kbuf) {
2200 +#ifdef CONFIG_SL2312_SHARE_PIN
2201 + mtd_unlock(); // sl2312 share pin lock
2202 +#endif
2203 return -ENOMEM;
2204 + }
2205
2206 while (count) {
2207
2208 @@ -283,6 +391,9 @@
2209
2210 if (copy_from_user(kbuf, buf, len)) {
2211 kfree(kbuf);
2212 +#ifdef CONFIG_SL2312_SHARE_PIN
2213 + mtd_unlock(); // sl2312 share pin lock
2214 +#endif
2215 return -EFAULT;
2216 }
2217
2218 @@ -323,11 +434,17 @@
2219 }
2220 else {
2221 kfree(kbuf);
2222 +#ifdef CONFIG_SL2312_SHARE_PIN
2223 + mtd_unlock(); // sl2312 share pin lock
2224 +#endif
2225 return ret;
2226 }
2227 }
2228
2229 kfree(kbuf);
2230 +#ifdef CONFIG_SL2312_SHARE_PIN
2231 + mtd_unlock(); // sl2312 share pin lock
2232 +#endif
2233 return total_retlen;
2234 } /* mtd_write */
2235
2236 @@ -381,36 +498,67 @@
2237 u_long size;
2238 struct mtd_info_user info;
2239
2240 +#ifdef CONFIG_SL2312_SHARE_PIN
2241 + mtd_lock(); // sl2312 share pin lock
2242 +#endif
2243 +
2244 DEBUG(MTD_DEBUG_LEVEL0, "MTD_ioctl\n");
2245
2246 size = (cmd & IOCSIZE_MASK) >> IOCSIZE_SHIFT;
2247 if (cmd & IOC_IN) {
2248 if (!access_ok(VERIFY_READ, argp, size))
2249 + {
2250 +#ifdef CONFIG_SL2312_SHARE_PIN
2251 + mtd_unlock(); // sl2312 share pin lock
2252 +#endif
2253 return -EFAULT;
2254 + }
2255 }
2256 if (cmd & IOC_OUT) {
2257 if (!access_ok(VERIFY_WRITE, argp, size))
2258 + {
2259 +#ifdef CONFIG_SL2312_SHARE_PIN
2260 + mtd_unlock(); // sl2312 share pin lock
2261 +#endif
2262 return -EFAULT;
2263 + }
2264 }
2265
2266 switch (cmd) {
2267 case MEMGETREGIONCOUNT:
2268 if (copy_to_user(argp, &(mtd->numeraseregions), sizeof(int)))
2269 + {
2270 +#ifdef CONFIG_SL2312_SHARE_PIN
2271 + mtd_unlock(); // sl2312 share pin lock
2272 +#endif
2273 return -EFAULT;
2274 + }
2275 break;
2276
2277 case MEMGETREGIONINFO:
2278 {
2279 struct region_info_user ur;
2280
2281 - if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
2282 + if (copy_from_user(&ur, argp, sizeof(struct region_info_user))) {
2283 +#ifdef CONFIG_SL2312_SHARE_PIN
2284 + mtd_unlock(); // sl2312 share pin lock
2285 +#endif
2286 return -EFAULT;
2287 + }
2288
2289 - if (ur.regionindex >= mtd->numeraseregions)
2290 + if (ur.regionindex >= mtd->numeraseregions) {
2291 +#ifdef CONFIG_SL2312_SHARE_PIN
2292 + mtd_unlock(); // sl2312 share pin lock
2293 +#endif
2294 return -EINVAL;
2295 + }
2296 if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
2297 - sizeof(struct mtd_erase_region_info)))
2298 + sizeof(struct mtd_erase_region_info))) {
2299 +#ifdef CONFIG_SL2312_SHARE_PIN
2300 + mtd_unlock(); // sl2312 share pin lock
2301 +#endif
2302 return -EFAULT;
2303 + }
2304 break;
2305 }
2306
2307 @@ -433,7 +581,12 @@
2308 struct erase_info *erase;
2309
2310 if(!(file->f_mode & 2))
2311 + {
2312 +#ifdef CONFIG_SL2312_SHARE_PIN
2313 + mtd_unlock(); // sl2312 share pin lock
2314 +#endif
2315 return -EPERM;
2316 + }
2317
2318 erase=kzalloc(sizeof(struct erase_info),GFP_KERNEL);
2319 if (!erase)
2320 @@ -447,6 +600,9 @@
2321 if (copy_from_user(&erase->addr, argp,
2322 sizeof(struct erase_info_user))) {
2323 kfree(erase);
2324 +#ifdef CONFIG_SL2312_SHARE_PIN
2325 + mtd_unlock(); // sl2312 share pin lock
2326 +#endif
2327 return -EFAULT;
2328 }
2329 erase->mtd = mtd;
2330 @@ -484,14 +640,26 @@
2331 struct mtd_oob_buf buf;
2332 struct mtd_oob_ops ops;
2333
2334 - if(!(file->f_mode & 2))
2335 + if(!(file->f_mode & 2)) {
2336 +#ifdef CONFIG_SL2312_SHARE_PIN
2337 + mtd_unlock(); // sl2312 share pin lock
2338 +#endif
2339 return -EPERM;
2340 + }
2341
2342 - if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
2343 + if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
2344 +#ifdef CONFIG_SL2312_SHARE_PIN
2345 + mtd_unlock(); // sl2312 share pin lock
2346 +#endif
2347 return -EFAULT;
2348 + }
2349
2350 - if (buf.length > 4096)
2351 + if (buf.length > 4096) {
2352 +#ifdef CONFIG_SL2312_SHARE_PIN
2353 + mtd_unlock(); // sl2312 share pin lock
2354 +#endif
2355 return -EINVAL;
2356 + }
2357
2358 if (!mtd->write_oob)
2359 ret = -EOPNOTSUPP;
2360 @@ -499,8 +667,12 @@
2361 ret = access_ok(VERIFY_READ, buf.ptr,
2362 buf.length) ? 0 : EFAULT;
2363
2364 - if (ret)
2365 + if (ret) {
2366 +#ifdef CONFIG_SL2312_SHARE_PIN
2367 + mtd_unlock(); // sl2312 share pin lock
2368 +#endif
2369 return ret;
2370 + }
2371
2372 ops.ooblen = buf.length;
2373 ops.ooboffs = buf.start & (mtd->oobsize - 1);
2374 @@ -536,19 +708,35 @@
2375 struct mtd_oob_buf buf;
2376 struct mtd_oob_ops ops;
2377
2378 - if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf)))
2379 + if (copy_from_user(&buf, argp, sizeof(struct mtd_oob_buf))) {
2380 +#ifdef CONFIG_SL2312_SHARE_PIN
2381 + mtd_unlock(); // sl2312 share pin lock
2382 +#endif
2383 return -EFAULT;
2384 + }
2385
2386 - if (buf.length > 4096)
2387 + if (buf.length > 4096) {
2388 +#ifdef CONFIG_SL2312_SHARE_PIN
2389 + mtd_unlock(); // sl2312 share pin lock
2390 +#endif
2391 return -EINVAL;
2392 + }
2393
2394 - if (!mtd->read_oob)
2395 + if (!mtd->read_oob) {
2396 +#ifdef CONFIG_SL2312_SHARE_PIN
2397 + mtd_unlock(); // sl2312 share pin lock
2398 +#endif
2399 ret = -EOPNOTSUPP;
2400 + }
2401 else
2402 ret = access_ok(VERIFY_WRITE, buf.ptr,
2403 buf.length) ? 0 : -EFAULT;
2404 - if (ret)
2405 + if (ret) {
2406 +#ifdef CONFIG_SL2312_SHARE_PIN
2407 + mtd_unlock(); // sl2312 share pin lock
2408 +#endif
2409 return ret;
2410 + }
2411
2412 ops.ooblen = buf.length;
2413 ops.ooboffs = buf.start & (mtd->oobsize - 1);
2414 @@ -580,7 +768,12 @@
2415 struct erase_info_user info;
2416
2417 if (copy_from_user(&info, argp, sizeof(info)))
2418 + {
2419 +#ifdef CONFIG_SL2312_SHARE_PIN
2420 + mtd_unlock(); // sl2312 share pin lock
2421 +#endif
2422 return -EFAULT;
2423 + }
2424
2425 if (!mtd->lock)
2426 ret = -EOPNOTSUPP;
2427 @@ -594,7 +787,12 @@
2428 struct erase_info_user info;
2429
2430 if (copy_from_user(&info, argp, sizeof(info)))
2431 + {
2432 +#ifdef CONFIG_SL2312_SHARE_PIN
2433 + mtd_unlock(); // sl2312 share pin lock
2434 +#endif
2435 return -EFAULT;
2436 + }
2437
2438 if (!mtd->unlock)
2439 ret = -EOPNOTSUPP;
2440 @@ -629,11 +827,21 @@
2441 loff_t offs;
2442
2443 if (copy_from_user(&offs, argp, sizeof(loff_t)))
2444 + {
2445 +#ifdef CONFIG_SL2312_SHARE_PIN
2446 + mtd_unlock(); // sl2312 share pin lock
2447 +#endif
2448 return -EFAULT;
2449 + }
2450 if (!mtd->block_isbad)
2451 ret = -EOPNOTSUPP;
2452 else
2453 + {
2454 +#ifdef CONFIG_SL2312_SHARE_PIN
2455 + mtd_unlock(); // sl2312 share pin lock
2456 +#endif
2457 return mtd->block_isbad(mtd, offs);
2458 + }
2459 break;
2460 }
2461
2462 @@ -642,11 +850,21 @@
2463 loff_t offs;
2464
2465 if (copy_from_user(&offs, argp, sizeof(loff_t)))
2466 + {
2467 +#ifdef CONFIG_SL2312_SHARE_PIN
2468 + mtd_unlock(); // sl2312 share pin lock
2469 +#endif
2470 return -EFAULT;
2471 + }
2472 if (!mtd->block_markbad)
2473 ret = -EOPNOTSUPP;
2474 else
2475 + {
2476 +#ifdef CONFIG_SL2312_SHARE_PIN
2477 + mtd_unlock(); // sl2312 share pin lock
2478 +#endif
2479 return mtd->block_markbad(mtd, offs);
2480 + }
2481 break;
2482 }
2483
2484 @@ -654,8 +872,12 @@
2485 case OTPSELECT:
2486 {
2487 int mode;
2488 - if (copy_from_user(&mode, argp, sizeof(int)))
2489 + if (copy_from_user(&mode, argp, sizeof(int))) {
2490 +#ifdef CONFIG_SL2312_SHARE_PIN
2491 + mtd_unlock(); // sl2312 share pin lock
2492 +#endif
2493 return -EFAULT;
2494 + }
2495
2496 mfi->mode = MTD_MODE_NORMAL;
2497
2498 @@ -670,7 +892,12 @@
2499 {
2500 struct otp_info *buf = kmalloc(4096, GFP_KERNEL);
2501 if (!buf)
2502 + {
2503 +#ifdef CONFIG_SL2312_SHARE_PIN
2504 + mtd_unlock(); // sl2312 share pin lock
2505 +#endif
2506 return -ENOMEM;
2507 + }
2508 ret = -EOPNOTSUPP;
2509 switch (mfi->mode) {
2510 case MTD_MODE_OTP_FACTORY:
2511 @@ -701,12 +928,24 @@
2512 {
2513 struct otp_info info;
2514
2515 - if (mfi->mode != MTD_MODE_OTP_USER)
2516 + if (mfi->mode != MTD_MODE_OTP_USER) {
2517 +#ifdef CONFIG_SL2312_SHARE_PIN
2518 + mtd_unlock(); // sl2312 share pin lock
2519 +#endif
2520 return -EINVAL;
2521 - if (copy_from_user(&info, argp, sizeof(info)))
2522 + }
2523 + if (copy_from_user(&info, argp, sizeof(info))) {
2524 +#ifdef CONFIG_SL2312_SHARE_PIN
2525 + mtd_unlock(); // sl2312 share pin lock
2526 +#endif
2527 return -EFAULT;
2528 - if (!mtd->lock_user_prot_reg)
2529 + }
2530 + if (!mtd->lock_user_prot_reg) {
2531 +#ifdef CONFIG_SL2312_SHARE_PIN
2532 + mtd_unlock(); // sl2312 share pin lock
2533 +#endif
2534 return -EOPNOTSUPP;
2535 + }
2536 ret = mtd->lock_user_prot_reg(mtd, info.start, info.length);
2537 break;
2538 }
2539 @@ -742,8 +981,12 @@
2540 break;
2541
2542 case MTD_MODE_RAW:
2543 - if (!mtd->read_oob || !mtd->write_oob)
2544 + if (!mtd->read_oob || !mtd->write_oob) {
2545 +#ifdef CONFIG_SL2312_SHARE_PIN
2546 + mtd_unlock(); // sl2312 share pin lock
2547 +#endif
2548 return -EOPNOTSUPP;
2549 + }
2550 mfi->mode = arg;
2551
2552 case MTD_MODE_NORMAL:
2553 @@ -766,6 +1009,10 @@
2554 ret = -ENOTTY;
2555 }
2556
2557 +#ifdef CONFIG_SL2312_SHARE_PIN
2558 + mtd_unlock(); // sl2312 share pin lock
2559 +#endif
2560 +
2561 return ret;
2562 } /* memory_ioctl */
2563
2564 --- a/drivers/mtd/nand/Kconfig
2565 +++ b/drivers/mtd/nand/Kconfig
2566 @@ -44,6 +44,13 @@
2567 This enables the driver for the autronix autcpu12 board to
2568 access the SmartMediaCard.
2569
2570 +config MTD_NAND_SL2312
2571 + tristate "NAND Flash device on Storlink board"
2572 + depends on ARM && MTD_NAND && ARCH_SL2312
2573 + help
2574 + This enables the driver for the Storlink board to
2575 + access the nand device.
2576 +
2577 config MTD_NAND_EDB7312
2578 tristate "Support for Cirrus Logic EBD7312 evaluation board"
2579 depends on ARCH_EDB7312
2580 --- /dev/null
2581 +++ b/drivers/mtd/nand/sl2312-flash-nand.c
2582 @@ -0,0 +1,2287 @@
2583 +/*
2584 + * drivers/mtd/sl2312.c
2585 + *
2586 + * $Id: sl2312-flash-nand.c,v 1.5 2006/06/15 07:02:29 middle Exp $
2587 + *
2588 + * Copyright (C) 2001 Toshiba Corporation
2589 + *
2590 + * 2003 (c) MontaVista Software, Inc. This file is licensed under
2591 + * the terms of the GNU General Public License version 2. This program
2592 + * is licensed "as is" without any warranty of any kind, whether express
2593 + * or implied.
2594 + *
2595 + */
2596 +
2597 +#include <linux/slab.h>
2598 +#include <linux/init.h>
2599 +#include <linux/module.h>
2600 +#include <linux/mtd/mtd.h>
2601 +#include <linux/mtd/nand.h>
2602 +#include <linux/mtd/nand_ecc.h>
2603 +#include <linux/mtd/partitions.h>
2604 +#include <linux/delay.h>
2605 +#include <asm/io.h>
2606 +#include <asm/hardware.h>
2607 +#include <asm/arch/sl2312.h>
2608 +#include "sl2312-flash-nand.h"
2609 +
2610 +
2611 +#include <linux/errno.h>
2612 +#include <linux/sched.h>
2613 +#include <linux/types.h>
2614 +#include <linux/mtd/compatmac.h>
2615 +#include <linux/interrupt.h>
2616 +#include <linux/bitops.h>
2617 +
2618 +
2619 +/*
2620 + * NAND low-level MTD interface functions
2621 + */
2622 +static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
2623 +static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
2624 +static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
2625 +
2626 +static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
2627 +static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
2628 +static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
2629 +static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
2630 +static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
2631 + size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
2632 +static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
2633 +static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
2634 + unsigned long count, loff_t to, size_t * retlen);
2635 +static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
2636 + unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
2637 +static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
2638 +static void sl2312_nand_sync (struct mtd_info *mtd);
2639 +static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel);
2640 +static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt);
2641 +static int sl2312_nand_erase_block(struct mtd_info *mtd, int page);
2642 +
2643 +/*
2644 + * MTD structure for sl2312 NDFMC
2645 + */
2646 +static struct mtd_info *sl2312_mtd = NULL;
2647 +static int nand_page=0,nand_col=0;
2648 +
2649 +/* Define default oob placement schemes for large and small page devices */
2650 +static struct nand_oobinfo nand_oob_8 = {
2651 + .useecc = MTD_NANDECC_AUTOPLACE,
2652 + .eccbytes = 3,
2653 + .eccpos = {0, 1, 2},
2654 + .oobfree = { {3, 2}, {6, 2} }
2655 +};
2656 +
2657 +static struct nand_oobinfo nand_oob_16 = {
2658 + .useecc = MTD_NANDECC_AUTOPLACE,
2659 + .eccbytes = 6,
2660 + .eccpos = {0, 1, 2, 3, 6, 7},
2661 + .oobfree = { {8, 8} }
2662 +};
2663 +
2664 +static struct nand_oobinfo nand_oob_64 = {
2665 + .useecc = MTD_NANDECC_AUTOPLACE,
2666 + .eccbytes = 24,
2667 + .eccpos = {
2668 + 40, 41, 42, 43, 44, 45, 46, 47,
2669 + 48, 49, 50, 51, 52, 53, 54, 55,
2670 + 56, 57, 58, 59, 60, 61, 62, 63},
2671 + .oobfree = { {2, 38} }
2672 +};
2673 +
2674 +
2675 +/*
2676 + * Define partitions for flash device
2677 + */
2678 +/* the base address of FLASH control register */
2679 +#define FLASH_CONTROL_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_CTRL_BASE))
2680 +#define SL2312_GLOBAL_BASE_ADDR (IO_ADDRESS(SL2312_GLOBAL_BASE))
2681 +//#define SL2312_FLASH_BASE_ADDR (IO_ADDRESS(SL2312_FLASH_BASE))
2682 +#define SL2312_FLASH_BASE_ADDR FLASH_VADDR(SL2312_FLASH_BASE)
2683 +static unsigned int CHIP_EN;
2684 +/* define read/write register utility */
2685 +//#define FLASH_READ_REG(offset) (__raw_readl(offset+FLASH_CONTROL_BASE_ADDR))
2686 +//#define FLASH_WRITE_REG(offset,val) (__raw_writel(val,offset+FLASH_CONTROL_BASE_ADDR))
2687 +//#define FLASH_READ_DATA(offset) (__raw_readb(offset+SL2312_FLASH_BASE_ADDR))
2688 +//#define FLASH_WRITE_DATA(offset,val) (__raw_writeb(val,offset+SL2312_FLASH_BASE_ADDR))
2689 +
2690 +unsigned int FLASH_READ_REG(unsigned int addr)
2691 +{
2692 + unsigned int *base;
2693 + unsigned int data;
2694 +
2695 + base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
2696 + data = *base;
2697 + return (data);
2698 +}
2699 +
2700 +void FLASH_WRITE_REG(unsigned int addr,unsigned int data)
2701 +{
2702 + unsigned int *base;
2703 +
2704 + base = (unsigned int *)(FLASH_CONTROL_BASE_ADDR + addr);
2705 + *base = data;
2706 + return;
2707 +}
2708 +
2709 +unsigned int FLASH_READ_DATA(unsigned int addr)
2710 +{
2711 + unsigned char *base;
2712 + unsigned int data;
2713 +
2714 + base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
2715 + data = *base;
2716 + return (data);
2717 +}
2718 +
2719 +void FLASH_WRITE_DATA(unsigned int addr,unsigned int data)
2720 +{
2721 + unsigned char *base;
2722 +
2723 + base = (unsigned char *)(SL2312_FLASH_BASE_ADDR + addr);
2724 + *base = data;
2725 + return;
2726 +}
2727 +
2728 +/* the offset of FLASH control register */
2729 +enum NFLASH_REGISTER {
2730 + NFLASH_ID = 0x0000,
2731 + NFLASH_STATUS = 0x0008,
2732 + NFLASH_TYPE = 0x000c,
2733 + NFLASH_ACCESS = 0x0030,
2734 + NFLASH_COUNT = 0x0034,
2735 + NFLASH_CMD_ADDR = 0x0038,
2736 + NFLASH_ADDRESS = 0x003C,
2737 + NFLASH_DATA = 0x0040,
2738 + NFLASH_TIMING = 0x004C,
2739 + NFLASH_ECC_STATUS = 0x0050,
2740 + NFLASH_ECC_CONTROL = 0x0054,
2741 + NFLASH_ECC_OOB = 0x005c,
2742 + NFLASH_ECC_CODE_GEN0 = 0x0060,
2743 + NFLASH_ECC_CODE_GEN1 = 0x0064,
2744 + NFLASH_ECC_CODE_GEN2 = 0x0068,
2745 + NFLASH_ECC_CODE_GEN3 = 0x006C,
2746 + NFLASH_FIFO_CONTROL = 0x0070,
2747 + NFLASH_FIFO_STATUS = 0x0074,
2748 + NFLASH_FIFO_ADDRESS = 0x0078,
2749 + NFLASH_FIFO_DATA = 0x007c,
2750 +};
2751 +
2752 +
2753 +
2754 +//#define FLASH_BASE FLASH_CONTROL_BASE_ADDR
2755 +//#define FLASH_SIZE 0x00800000 //INTEGRATOR_FLASH_SIZE
2756 +
2757 +//#define FLASH_PART_SIZE 8388608
2758 +
2759 +//static unsigned int flash_indirect_access = 0;
2760 +
2761 +
2762 +#ifdef CONFIG_SL2312_SHARE_PIN
2763 +void sl2312flash_enable_nand_flash(void)
2764 +{
2765 + unsigned int reg_val;
2766 +
2767 + reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
2768 + reg_val = reg_val & 0xfffffffb;
2769 + writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
2770 + return;
2771 +}
2772 +
2773 +void sl2312flash_disable_nand_flash(void)
2774 +{
2775 + unsigned int reg_val;
2776 +
2777 + reg_val = readl(SL2312_GLOBAL_BASE_ADDR + 0x30);
2778 + reg_val = reg_val | 0x00000004;
2779 + writel(reg_val,SL2312_GLOBAL_BASE_ADDR + 0x30);
2780 + return;
2781 +}
2782 +#endif
2783 +
2784 +extern struct nand_oobinfo jffs2_oobinfo;
2785 +/*
2786 + * Define partitions for flash devices
2787 + */
2788 +
2789 +static struct mtd_partition sl2312_partitions[] = {
2790 + { name: "RedBoot", offset: 0x00000000, size: 0x0020000, },
2791 + { name: "Kernel", offset: 0x00020000, size: 0x00200000, },
2792 + { name: "Ramdisk", offset: 0x00220000, size: 0x00280000, },
2793 + { name: "Application", offset: 0x004A0000, size: 0x00320000, },
2794 + { name: "VCTL", offset: 0x007C0000, size: 0x20000, },
2795 + { name: "CurConf", offset: 0x007E0000, size: 0x20000, },
2796 + { name: "FIS directory", offset: 0x007e0000, size: 0x00020000, }
2797 +
2798 +};
2799 +
2800 +
2801 +/*
2802 + * hardware specific access to control-lines
2803 +*/
2804 +static void sl2312_hwcontrol(struct mtd_info *mtd, int cmd)
2805 +{
2806 +
2807 + return ;
2808 +}
2809 +
2810 +static int sl2312_nand_scan_bbt(struct mtd_info *mtd)
2811 +{
2812 + return 0;
2813 +}
2814 +
2815 +/**
2816 + * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
2817 + * @mtd: MTD device structure
2818 + * @ofs: offset relative to mtd start
2819 + */
2820 +static int sl2312_nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
2821 +{
2822 + /* Check for invalid offset */
2823 + if (ofs > mtd->size)
2824 + return -EINVAL;
2825 +
2826 + return sl2312_nand_block_checkbad (mtd, ofs, 1, 0);
2827 +}
2828 +
2829 +/**
2830 + * nand_block_checkbad - [GENERIC] Check if a block is marked bad
2831 + * @mtd: MTD device structure
2832 + * @ofs: offset from device start
2833 + * @getchip: 0, if the chip is already selected
2834 + * @allowbbt: 1, if its allowed to access the bbt area
2835 + *
2836 + * Check, if the block is bad. Either by reading the bad block table or
2837 + * calling of the scan function.
2838 + */
2839 +
2840 +static int sl2312_nand_erase_block(struct mtd_info *mtd, int page)
2841 +{
2842 + int opcode;
2843 + /* Send commands to erase a page */
2844 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
2845 +
2846 + if(mtd->oobblock > 528)
2847 + FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
2848 + else
2849 + FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
2850 +
2851 + FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
2852 + FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
2853 +
2854 +
2855 +
2856 + /* read maker code */
2857 + opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
2858 + FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
2859 +
2860 + while(opcode&0x80000000) //polling flash access 31b
2861 + {
2862 + opcode=FLASH_READ_REG(NFLASH_ACCESS);
2863 + //sl2312_flash_delay();
2864 + schedule();
2865 + //cond_resched();
2866 + }
2867 +}
2868 +
2869 +void sl2312_flash_delay(void)
2870 +{
2871 + int i;
2872 +
2873 + for(i=0; i<50; i++)
2874 + i=i;
2875 +}
2876 +
2877 +static int sl2312_nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
2878 +{
2879 + struct nand_chip *this = mtd->priv;
2880 +
2881 + if (!this->bbt)
2882 + return this->block_bad(mtd, ofs, getchip);
2883 +
2884 + /* Return info from the table */
2885 + return nand_isbad_bbt (mtd, ofs, allowbbt);
2886 +}
2887 +
2888 +/**
2889 + * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
2890 + * @mtd: MTD device structure
2891 + * @ofs: offset relative to mtd start
2892 + */
2893 +static int sl2312_nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
2894 +{
2895 + struct nand_chip *this = mtd->priv;
2896 + int ret;
2897 +
2898 + if ((ret = sl2312_nand_block_isbad(mtd, ofs))) {
2899 + /* If it was bad already, return success and do nothing. */
2900 + if (ret > 0)
2901 + return 0;
2902 + return ret;
2903 + }
2904 +
2905 + return this->block_markbad(mtd, ofs);
2906 +}
2907 +
2908 +/*
2909 + * Get chip for selected access
2910 + */
2911 +static inline void sl2312_nand_get_chip (struct nand_chip *this, struct mtd_info *mtd, int new_state, int *erase_state)
2912 +{
2913 +
2914 + DECLARE_WAITQUEUE (wait, current);
2915 +
2916 + /*
2917 + * Grab the lock and see if the device is available
2918 + * For erasing, we keep the spinlock until the
2919 + * erase command is written.
2920 + */
2921 +retry:
2922 + spin_lock_bh (&this->chip_lock);
2923 +
2924 + if (this->state == FL_READY) {
2925 + this->state = new_state;
2926 + if (new_state != FL_ERASING)
2927 + spin_unlock_bh (&this->chip_lock);
2928 + return;
2929 + }
2930 +
2931 + if (this->state == FL_ERASING) {
2932 + if (new_state != FL_ERASING) {
2933 + this->state = new_state;
2934 + spin_unlock_bh (&this->chip_lock);
2935 + this->select_chip(mtd, 0); /* select in any case */
2936 + this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
2937 + return;
2938 + }
2939 + }
2940 +
2941 + set_current_state (TASK_UNINTERRUPTIBLE);
2942 + add_wait_queue (&this->wq, &wait);
2943 + spin_unlock_bh (&this->chip_lock);
2944 + schedule ();
2945 + remove_wait_queue (&this->wq, &wait);
2946 + goto retry;
2947 +}
2948 +
2949 +/*
2950 +* read device ready pin
2951 +*/
2952 +static int sl2312_device_ready(struct mtd_info *mtd)
2953 +{
2954 + int ready;
2955 +
2956 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
2957 + FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000070); //set only command no address and two data
2958 +
2959 + FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
2960 +
2961 +
2962 + ready = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
2963 + FLASH_WRITE_REG(NFLASH_ACCESS, ready);
2964 +
2965 + while(ready&0x80000000) //polling flash access 31b
2966 + {
2967 + ready=FLASH_READ_REG(NFLASH_ACCESS);
2968 + //sl2312_flash_delay();
2969 + schedule();
2970 + }
2971 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
2972 + ready=FLASH_READ_REG(NFLASH_DATA)&0xff;
2973 + return ready;
2974 +}
2975 +void sl2312_enable_hwecc(struct mtd_info *mtd, int mode)
2976 +{
2977 + /* reset first */
2978 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
2979 +
2980 +}
2981 +
2982 +
2983 +void sl2312_device_setup(void)
2984 +{
2985 +
2986 +}
2987 +static u_char sl2312_nand_read_byte(struct mtd_info *mtd)
2988 +{
2989 +
2990 + unsigned int data=0, page=0, col=0, tmp, i;
2991 +
2992 + printk ("**************************sl2312_nand_read_byte !! \n");
2993 + //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
2994 + //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
2995 + page = nand_page;
2996 + col = nand_col;
2997 + for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
2998 + {
2999 + if(i==col)
3000 + data = FLASH_READ_DATA(page*mtd->oobblock +i);
3001 + else
3002 + tmp = FLASH_READ_DATA(page*mtd->oobblock +i);
3003 + }
3004 + return data&0xff;
3005 +}
3006 +
3007 +static void sl2312_nand_write_byte(struct mtd_info *mtd, u_char byte)
3008 +{
3009 + //struct nand_chip *this = mtd->priv;
3010 + unsigned int page=0, col=0, i;
3011 + u_char *databuf,oobbuf[mtd->oobsize];
3012 + size_t retlen;
3013 + retlen=0;
3014 + printk ("********************sl2312_nand_write_byte !! \n");
3015 + page = nand_page;
3016 + col = nand_col;
3017 + databuf = kmalloc (mtd->oobsize+mtd->oobblock,GFP_KERNEL);
3018 +
3019 + if (!databuf) {
3020 + printk ("sl2312_nand_write_byte : Unable to allocate SL2312 NAND MTD device structure.\n");
3021 +
3022 + }
3023 +
3024 + for(i=0;i<(mtd->oobblock+mtd->oobsize);i++)
3025 + databuf[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
3026 +
3027 + databuf[col] = byte;
3028 + sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
3029 +
3030 +}
3031 +
3032 +static void sl2312_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
3033 +{
3034 + int i, page=0,col=0;
3035 + struct nand_chip *this = mtd->priv;
3036 + u_char *databuf, *oobbuf;
3037 + size_t retlen;
3038 + retlen=0;
3039 +
3040 +
3041 + printk ("***********************sl2312_nand_write_buf !! \n");
3042 + databuf = &(this->data_buf[0]);
3043 + oobbuf = &(this->data_buf[mtd->oobblock]);
3044 + for (i = 0; i < mtd->oobsize; i++)
3045 + oobbuf[i] = 0xff;
3046 +
3047 + if(len < mtd->oobblock)
3048 + {
3049 + //addr = FLASH_READ_REG(NFLASH_ADDRESS);
3050 + //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
3051 + //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
3052 + page = nand_page;
3053 + col = nand_col;
3054 +
3055 + sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, databuf, oobbuf, NULL);
3056 +
3057 + for(i=col;i<len;i++)
3058 + databuf[col+i] = buf[i];
3059 +
3060 + sl2312_nand_write_ecc (mtd, page, mtd->oobblock, &retlen, databuf, oobbuf, NULL);
3061 +
3062 + }
3063 +
3064 +}
3065 +
3066 +static void sl2312_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
3067 +{
3068 + int i, page=0,col=0,addr=0,tmp=0;
3069 + //struct nand_chip *this = mtd->priv;
3070 + printk ("********************sl2312_nand_read_buf !! \n");
3071 + if(len < mtd->oobblock)
3072 + {
3073 + //addr = FLASH_READ_REG(NFLASH_ADDRESS);
3074 + //page = FLASH_READ_REG(NFLASH_ADDRESS)&0xffffff00;
3075 + //col = FLASH_READ_REG(NFLASH_ADDRESS)&0x000000ff;
3076 + page = nand_page;
3077 + col = nand_col;
3078 + for (i=col; i<((mtd->oobblock+mtd->oobsize)-col); i++)
3079 + {
3080 + if(i<len)
3081 + buf[i] = FLASH_READ_DATA(addr+i);
3082 + else
3083 + tmp = FLASH_READ_DATA(addr+i);
3084 + }
3085 + }
3086 +}
3087 +
3088 +static int sl2312_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
3089 +{
3090 + int i;
3091 + //struct nand_chip *this = mtd->priv;
3092 + u_char *datatmp, *oobtmp;
3093 + size_t retlen;
3094 + retlen=0;
3095 +
3096 + datatmp = kmalloc (mtd->oobblock,GFP_KERNEL);
3097 + oobtmp = kmalloc (mtd->oobsize,GFP_KERNEL);
3098 +
3099 + if ((!datatmp)||(!oobtmp)) {
3100 + printk ("sl2312_nand_verify_buf : Unable to allocate SL2312 NAND MTD device structure.\n");
3101 +
3102 + }
3103 + //page = nand_page;
3104 + for(i=0;i<mtd->oobblock;i++)
3105 + datatmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock +i);
3106 + /* read oobdata */
3107 + for (i = 0; i < mtd->oobsize; i++)
3108 + oobtmp[i] = FLASH_READ_DATA(nand_page*mtd->oobblock + mtd->oobblock + i);
3109 +
3110 + if(len==mtd->oobblock)
3111 + {
3112 + for (i=0; i<len; i++)
3113 + {
3114 + if (buf[i] != datatmp[i])
3115 + {
3116 + kfree(datatmp);
3117 + kfree(oobtmp);
3118 + printk("Data verify error -> page: %x, byte: %x \n",nand_page,i);
3119 + return i;
3120 + }
3121 + }
3122 + }
3123 + else if(len == mtd->oobsize)
3124 + {
3125 + for (i=0; i<len; i++)
3126 + {
3127 + if (buf[i] != oobtmp[i])
3128 + {
3129 + kfree(datatmp);
3130 + kfree(oobtmp);
3131 + printk("OOB verify error -> page: %x, byte: %x \n",nand_page,i);
3132 + return i;
3133 + }
3134 + }
3135 + }
3136 + else
3137 + {
3138 + printk (KERN_WARNING "sl2312_nand_verify_buf : verify length not match 0x%08x\n", len);
3139 + kfree(datatmp);
3140 + kfree(oobtmp);
3141 + return -1;
3142 + }
3143 +
3144 + kfree(datatmp);
3145 + kfree(oobtmp);
3146 + return 0;
3147 +}
3148 +
3149 +/*
3150 + * Send command to NAND device
3151 + */
3152 +static void sl2312_nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
3153 +{
3154 + register struct nand_chip *this = mtd->priv;
3155 + int opcode;
3156 +
3157 +
3158 + /*
3159 + * program and erase have their own busy handlers
3160 + * status and sequential in needs no delay
3161 + */
3162 + switch (command) {
3163 +
3164 + case NAND_CMD_PAGEPROG:
3165 + case NAND_CMD_ERASE1:
3166 + case NAND_CMD_ERASE2:
3167 + case NAND_CMD_SEQIN:
3168 + case NAND_CMD_STATUS:
3169 + case NAND_CMD_READ0:
3170 +
3171 + /*
3172 + * Write out the command to the device.
3173 + */
3174 + if (column != -1 || page_addr != -1) {
3175 +
3176 + /* Serially input address */
3177 + if (column != -1)
3178 + //FLASH_WRITE_REG(NFLASH_ADDRESS,column);
3179 + nand_col=column;
3180 +
3181 + opcode = FLASH_READ_REG(NFLASH_ADDRESS);
3182 +
3183 + if (page_addr != -1)
3184 + //FLASH_WRITE_REG(NFLASH_ADDRESS,opcode|(page_addr<<8));
3185 + nand_page = page_addr;
3186 +
3187 + }
3188 + return;
3189 +
3190 + case NAND_CMD_RESET:
3191 + if (this->dev_ready)
3192 + break;
3193 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
3194 + FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff70); //set only command and no other data
3195 + FLASH_WRITE_REG(NFLASH_CMD_ADDR, NAND_CMD_RESET); //write reset command
3196 +
3197 + opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
3198 + FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
3199 +
3200 + while(opcode&0x80000000) //polling flash access 31b
3201 + {
3202 + opcode=FLASH_READ_REG(NFLASH_ACCESS);
3203 + //sl2312_flash_delay();
3204 + schedule();
3205 + }
3206 + while ( !(sl2312_device_ready(mtd) & 0x40));
3207 + {
3208 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
3209 + //sl2312_flash_delay();
3210 + schedule();
3211 + return;
3212 + }
3213 + /* This applies to read commands */
3214 + default:
3215 + /*
3216 + * If we don't have access to the busy pin, we apply the given
3217 + * command delay
3218 + */
3219 + if (!this->dev_ready) {
3220 + udelay (this->chip_delay);
3221 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
3222 + return;
3223 + }
3224 + }
3225 +
3226 + /* wait until command is processed */
3227 + while (!this->dev_ready(mtd));
3228 +
3229 +}
3230 +/*Add function*/
3231 +static void nand_read_id(int chip_no, unsigned char *id)
3232 +{
3233 + unsigned int opcode, i;
3234 +
3235 + if(chip_no==0)
3236 + CHIP_EN = NFLASH_CHIP0_EN;
3237 + else
3238 + CHIP_EN = NFLASH_CHIP1_EN;
3239 +
3240 + opcode = FLASH_READ_REG(NFLASH_TYPE);
3241 +
3242 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
3243 + if((opcode&0x00000300)<=0x00000100)
3244 + FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000100); //set only command & address and two data
3245 + else
3246 + FLASH_WRITE_REG(NFLASH_COUNT, 0x7f000300); //set only command & address and 4 data
3247 +
3248 + FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000090); //write read id command
3249 + FLASH_WRITE_REG(NFLASH_ADDRESS, 0x00000000); //write address 0x00
3250 +
3251 + /* read maker code */
3252 + opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
3253 + FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
3254 + opcode=FLASH_READ_REG(NFLASH_ACCESS);
3255 + while(opcode&0x80000000) //polling flash access 31b
3256 + {
3257 + opcode=FLASH_READ_REG(NFLASH_ACCESS);
3258 + //sl2312_flash_delay();
3259 + schedule();
3260 + }
3261 +
3262 + opcode = FLASH_READ_REG(NFLASH_DATA);
3263 + if(DWIDTH==NFLASH_WiDTH16)
3264 + {
3265 + id[0] = opcode&0xff;
3266 + id[1] = (opcode&0xff00)>>8;
3267 + }
3268 + else
3269 + {
3270 + id[0] = opcode&0xff;
3271 + opcode = 0x80002000|DWIDTH|CHIP_EN;//|chip0_en; //set start bit & 8bits read command
3272 + FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
3273 + opcode=FLASH_READ_REG(NFLASH_ACCESS);
3274 + while(opcode&0x80000000) //polling flash access 31b
3275 + {
3276 + opcode=FLASH_READ_REG(NFLASH_ACCESS);
3277 + //sl2312_flash_delay();
3278 + schedule();
3279 + }
3280 + opcode = FLASH_READ_REG(NFLASH_DATA);
3281 + id[1] = (opcode&0xff00)>>8;
3282 +
3283 + opcode=FLASH_READ_REG(NFLASH_TYPE);
3284 + if((opcode&0x300)>0x100)
3285 + {
3286 + for(i=0;i<2;i++)
3287 + {
3288 + //data cycle 3 & 4 ->not use
3289 + opcode = 0x80002000|DWIDTH|CHIP_EN;//set start bit & 8bits read command
3290 + FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
3291 + opcode=FLASH_READ_REG(NFLASH_ACCESS);
3292 + while(opcode&0x80000000) //polling flash access 31b
3293 + {
3294 + opcode=FLASH_READ_REG(NFLASH_ACCESS);
3295 + //sl2312_flash_delay();
3296 + schedule();
3297 + }
3298 +
3299 + opcode=FLASH_READ_REG(NFLASH_DATA);
3300 + id[2+i] = (opcode&(0xff0000<<i*8))>>(8*(2+i));
3301 + }
3302 + }
3303 + }
3304 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
3305 +}
3306 +
3307 +/*
3308 + * NAND erase a block
3309 + */
3310 +static int sl2312_nand_erase (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
3311 +{
3312 + int page, len, status, pages_per_block, ret, chipnr;
3313 + struct nand_chip *this = mtd->priv;
3314 +
3315 + DEBUG (MTD_DEBUG_LEVEL3,
3316 + "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
3317 +
3318 + /* Start address must align on block boundary */
3319 + if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
3320 + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
3321 + return -EINVAL;
3322 + }
3323 +
3324 + /* Length must align on block boundary */
3325 + if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
3326 + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
3327 + return -EINVAL;
3328 + }
3329 +
3330 + /* Do not allow erase past end of device */
3331 + if ((instr->len + instr->addr) > mtd->size) {
3332 + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
3333 + return -EINVAL;
3334 + }
3335 +
3336 + instr->fail_addr = 0xffffffff;
3337 +
3338 + /* Grab the lock and see if the device is available */
3339 + sl2312_nand_get_chip (this, mtd, FL_ERASING, NULL);
3340 +
3341 + /* Shift to get first page */
3342 + page = (int) (instr->addr >> this->page_shift);
3343 + chipnr = (int) (instr->addr >> this->chip_shift);
3344 +
3345 + /* Calculate pages in each block */
3346 + pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
3347 +
3348 + /* Select the NAND device */
3349 + //this->select_chip(mtd, chipnr);
3350 + this->select_chip(mtd, 0);
3351 +
3352 + /* Check the WP bit */
3353 + /* Check, if it is write protected */
3354 + status = sl2312_device_ready(mtd);
3355 + if (!(status & 0x80)) {
3356 + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
3357 + instr->state = MTD_ERASE_FAILED;
3358 + goto erase_exit;
3359 + }
3360 +
3361 + /* Loop through the pages */
3362 + len = instr->len;
3363 +
3364 + instr->state = MTD_ERASING;
3365 +
3366 + while (len) {
3367 + /* Check if we have a bad block, we do not erase bad blocks ! */
3368 + if (this->block_bad(mtd, ((loff_t) page) << this->page_shift, 0)) {
3369 + printk (KERN_WARNING "nand_erase: attempt to erase a bad block at page 0x%08x\n", page);
3370 + //instr->state = MTD_ERASE_FAILED;
3371 + //goto erase_exit;
3372 + }
3373 +
3374 + /* Invalidate the page cache, if we erase the block which contains
3375 + the current cached page */
3376 + if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
3377 + this->pagebuf = -1;
3378 + /////////
3379 +
3380 + ///* Send commands to erase a page */
3381 + //FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
3382 + //
3383 + //if(mtd->oobblock > 528)
3384 + // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff21); // 3 address & 2 command
3385 + //else
3386 + // FLASH_WRITE_REG(NFLASH_COUNT, 0x7f0fff11); // 2 address & 2 command
3387 + //
3388 + //FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x0000d060); // write read id command
3389 + //FLASH_WRITE_REG(NFLASH_ADDRESS, page); //write address 0x00
3390 + //
3391 + //
3392 + //
3393 + ///* read maker code */
3394 + //opcode = 0x80003000|DWIDTH|CHIP_EN; //set start bit & 8bits write command
3395 + //FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
3396 + //
3397 + //while(opcode&0x80000000) //polling flash access 31b
3398 + //{
3399 + // opcode=FLASH_READ_REG(NFLASH_ACCESS);
3400 + // //sl2312_flash_delay();
3401 + // schedule();
3402 + // //cond_resched();
3403 + //}
3404 + sl2312_nand_erase_block(mtd, page);
3405 + //////////////
3406 + status = this->waitfunc (mtd, this, FL_ERASING);
3407 + /* See if block erase succeeded */
3408 + if (status & 0x01) {
3409 + DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
3410 + instr->state = MTD_ERASE_FAILED;
3411 + instr->fail_addr = (page << this->page_shift);
3412 + goto erase_exit;
3413 + }
3414 +
3415 + /* Increment page address and decrement length */
3416 + len -= (1 << this->phys_erase_shift);
3417 + page += pages_per_block;
3418 +
3419 + /* Check, if we cross a chip boundary */
3420 + if (len && !(page & this->pagemask)) {
3421 + chipnr++;
3422 + this->select_chip(mtd, 0);
3423 + this->select_chip(mtd, 0);
3424 + }
3425 + //sl2312_flash_delay();
3426 + schedule();
3427 + //cond_resched();
3428 + }
3429 + instr->state = MTD_ERASE_DONE;
3430 +
3431 +erase_exit:
3432 + /* De-select the NAND device */
3433 + this->select_chip(mtd, 0);
3434 + spin_unlock_bh (&this->chip_lock);
3435 +
3436 + ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;;
3437 + /* Do call back function */
3438 + if (!ret && instr->callback)
3439 + instr->callback (instr);
3440 +
3441 + /* The device is ready */
3442 + spin_lock_bh (&this->chip_lock);
3443 + this->state = FL_READY;
3444 + spin_unlock_bh (&this->chip_lock);
3445 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
3446 + /* Return more or less happy */
3447 + return ret;
3448 +}
3449 +
3450 +static void sl2312_nand_select_chip(struct mtd_info *mtd, int chip)
3451 +{
3452 + //struct nand_chip *this = mtd->priv;
3453 +
3454 + switch(chip) {
3455 + case -1:
3456 + CHIP_EN = NFLASH_CHIP0_EN;
3457 + break;
3458 + case 0:
3459 + CHIP_EN = NFLASH_CHIP0_EN;
3460 + break;
3461 + case 1:
3462 + CHIP_EN = NFLASH_CHIP1_EN;
3463 + break;
3464 + default:
3465 + CHIP_EN = NFLASH_CHIP0_EN;
3466 + break;
3467 + }
3468 +}
3469 +
3470 +/**
3471 + * nand_default_block_markbad - [DEFAULT] mark a block bad
3472 + * @mtd: MTD device structure
3473 + * @ofs: offset from device start
3474 + *
3475 + * This is the default implementation, which can be overridden by
3476 + * a hardware specific driver.
3477 +*/
3478 +static int sl2312_nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
3479 +{
3480 + struct nand_chip *this = mtd->priv;
3481 + u_char buf[2] = {0, 0};
3482 + size_t retlen;
3483 + int block;
3484 +
3485 + /* Get block number */
3486 + block = ((int) ofs) >> this->bbt_erase_shift;
3487 + this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
3488 +
3489 + /* Do we have a flash based bad block table ? */
3490 + if (this->options & NAND_USE_FLASH_BBT)
3491 + return nand_update_bbt (mtd, ofs);
3492 +
3493 + /* We write two bytes, so we dont have to mess with 16 bit access */
3494 + ofs += mtd->oobsize + (this->badblockpos & ~0x01);
3495 + return sl2312_nand_write_oob (mtd, ofs , 2, &retlen, buf);
3496 +}
3497 +
3498 +/* Appropriate chip should already be selected */
3499 +static int sl2312_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)//(struct mtd_info *mtd, unsigned long page, )
3500 +{
3501 + u_char *buf, *oobbuf;
3502 + size_t retlen;
3503 + unsigned long page, chipnr;
3504 + struct nand_chip *this = mtd->priv;
3505 +
3506 + if (getchip) {
3507 + page = (int)(ofs >> this->page_shift);
3508 + chipnr = (int)(ofs >> this->chip_shift);
3509 +
3510 + /* Grab the lock and see if the device is available */
3511 + sl2312_nand_get_chip (this, mtd, FL_READING, NULL);
3512 + /* Select the NAND device */
3513 + this->select_chip(mtd, chipnr);
3514 + } else
3515 + page = (int) ofs;
3516 +
3517 + buf = kmalloc (mtd->oobblock,GFP_KERNEL);
3518 + oobbuf = kmalloc (mtd->oobsize,GFP_KERNEL);
3519 +
3520 + if ((!buf)||(!oobbuf)) {
3521 + printk ("sl2312_nand_block_bad : Unable to allocate SL2312 NAND MTD device structure.\n");
3522 +
3523 + }
3524 +
3525 + sl2312_nand_read_ecc (mtd, page, mtd->oobblock , &retlen, buf, oobbuf, NULL);
3526 +
3527 +
3528 + if(((mtd->oobblock < 528)&&(oobbuf[5] != 0xff))||((mtd->oobblock > 528)&&(oobbuf[0] != 0xff)))
3529 + {
3530 + kfree(buf);
3531 + kfree(oobbuf);
3532 + return 1;
3533 + }
3534 +
3535 + kfree(buf);
3536 + kfree(oobbuf);
3537 + return 0;
3538 +}
3539 +
3540 +/*
3541 +* Use NAND read ECC
3542 +*/
3543 +static int sl2312_nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
3544 +{
3545 + return sl2312_nand_read_ecc (mtd, from, len, retlen, buf, NULL, NULL);
3546 +}
3547 +
3548 +/*
3549 + * NAND read with ECC
3550 + */
3551 +static int sl2312_nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
3552 + size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
3553 +{
3554 + int j, col, page, opcode, i;
3555 + int end=0;//, ecc=0;//, end_page=0;
3556 + int erase_state = 0;
3557 + int read = 0, oob = 0, ecc_failed = 0;//, ecc_status = 0
3558 + struct nand_chip *this = mtd->priv;
3559 + u_char *data_poi, *oob_data = oob_buf;
3560 + //u_char ecc_calc[6];
3561 + //u_char ecc_code[6];
3562 + int eccmode;
3563 + int *oob_config;
3564 +
3565 +
3566 +
3567 + // use chip default if zero
3568 + if (oobsel == NULL)
3569 + oobsel = &mtd->oobinfo;
3570 +
3571 + eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
3572 + oob_config = oobsel->eccpos;
3573 +
3574 + DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
3575 +
3576 + /* Do not allow reads past end of device */
3577 + if ((from + len) > mtd->size) {
3578 + DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
3579 + *retlen = 0;
3580 + return -EINVAL;
3581 + }
3582 +
3583 + /* Grab the lock and see if the device is available */
3584 + sl2312_nand_get_chip (this, mtd ,FL_READING, &erase_state);
3585 +
3586 + /* Select the NAND device */
3587 + this->select_chip(mtd, 0);
3588 +
3589 + /* First we calculate the starting page */
3590 + page = from >> this->page_shift;
3591 +
3592 + //end_page = mtd->oobblock + mtd->oobsize;
3593 + end = mtd->oobblock;
3594 + //ecc = mtd->eccsize;
3595 + /* Get raw starting column */
3596 + col = (from & (mtd->oobblock - 1));
3597 +
3598 +
3599 + /* Send the read command */
3600 + //this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
3601 +
3602 + /* Loop until all data read */
3603 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
3604 + while (read < len) {
3605 +
3606 + //udelay(1200);
3607 + /* If we have consequent page reads, apply delay or wait for ready/busy pin */
3608 + if (read) {
3609 + if (!this->dev_ready)
3610 + udelay (this->chip_delay);
3611 + else
3612 + while (!this->dev_ready(mtd));
3613 + }
3614 +
3615 + /*
3616 + * If the read is not page aligned, we have to read into data buffer
3617 + * due to ecc, else we read into return buffer direct
3618 + */
3619 + if (!col && (len - read) >= end)
3620 + data_poi = &buf[read];
3621 + else
3622 + data_poi = this->data_buf;
3623 +
3624 + /* get oob area, if we have no oob buffer from fs-driver */
3625 + if (!oob_buf) {
3626 + oob_data = &this->data_buf[end];
3627 + oob = 0;
3628 + }
3629 +
3630 + j = 0;
3631 + switch (eccmode) {
3632 + case NAND_ECC_NONE: { /* No ECC, Read in a page */
3633 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
3634 + break;
3635 + }
3636 +
3637 + case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
3638 + break;
3639 +
3640 + case NAND_ECC_HW3_256: /* Hardware ECC 3 byte /256 byte data: Read in first 256 byte, get ecc, */
3641 + break;
3642 +
3643 + case NAND_ECC_HW3_512:
3644 + case NAND_ECC_HW6_512: /* Hardware ECC 3/6 byte / 512 byte data : Read in a page */
3645 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
3646 + break;
3647 +
3648 + default:
3649 + printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
3650 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0);
3651 + //BUG();
3652 + }//end switch
3653 +
3654 + for(i=0;i<end;i++)
3655 + {
3656 + //udelay(7);
3657 + data_poi[i] = FLASH_READ_DATA(page*mtd->oobblock +i);
3658 + }
3659 + /* read oobdata */
3660 + for (i = 0; i < mtd->oobsize; i++)
3661 + {
3662 + //udelay(7);
3663 + oob_data[oob + i] = FLASH_READ_DATA(page*mtd->oobblock +end+i);
3664 + }
3665 +
3666 + /* Skip ECC, if not active */
3667 + if (eccmode == NAND_ECC_NONE)
3668 + goto readdata;
3669 +
3670 + // compare ecc and correct data
3671 +
3672 + opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
3673 + while(!(opcode&0x80000000)) //polling flash access 31b
3674 + {
3675 + opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
3676 + //sl2312_flash_delay();
3677 + schedule();
3678 + }
3679 + for(j=0;j<(end/512);j++)
3680 + {//for 2k page
3681 +
3682 + opcode = 0x00000000|oob_data[mtd->oobsize-3-4*j]<<16|oob_data[mtd->oobsize-2-4*j]<<8|oob_data[mtd->oobsize-1-4*j];
3683 +
3684 + //opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(j*4));
3685 +
3686 + FLASH_WRITE_REG(NFLASH_ECC_OOB, opcode);
3687 + opcode = 0x00000000|(j<<8); //select ECC code generation 0
3688 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, opcode); //???
3689 +
3690 + opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
3691 + if((opcode&0x00000003)==0x03)
3692 + {
3693 + printk (KERN_WARNING "\nPageRead Uncorrectable error !!\n");
3694 + ecc_failed++;
3695 + }
3696 + else if((opcode&0x00000003)==0x01)
3697 + {
3698 + printk (KERN_WARNING "\nPageRead One bit data error !!");
3699 + // correct data
3700 + if((data_poi[(opcode&0xff80)>>7]>>((opcode&0x38)>>3))%1)
3701 + data_poi[(opcode&0xff80)>>7] &= ~(1<<((opcode&0x38)>>3));
3702 + else
3703 + data_poi[(opcode&0xff80)>>7] |= (1<<((opcode&0x38)>>3));
3704 +
3705 + }
3706 + else if((opcode&0x00000003)==0x02)
3707 + {
3708 + printk (KERN_WARNING "\nPageRead One bit ECC error !!\n");
3709 + }
3710 + else if((opcode&0x00000003)==0x00)
3711 + {
3712 +
3713 + }
3714 +
3715 + }//for 2k page
3716 +readdata:
3717 + if (col || (len - read) < end) {
3718 + for (j = col; j < end && read < len; j++)
3719 + buf[read++] = data_poi[j];
3720 + } else
3721 + read += mtd->oobblock;
3722 + /* For subsequent reads align to page boundary. */
3723 + col = 0;
3724 + /* Increment page address */
3725 + page++;
3726 + schedule();
3727 + }
3728 + /* De-select the NAND device */
3729 + //this->select_chip(mtd, -1);
3730 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
3731 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_INDIRECT);
3732 + /* Wake up anyone waiting on the device */
3733 + spin_lock_bh (&this->chip_lock);
3734 + this->state = FL_READY;
3735 + wake_up (&this->wq);
3736 + spin_unlock_bh (&this->chip_lock);
3737 +
3738 + /*
3739 + * Return success, if no ECC failures, else -EIO
3740 + * fs driver will take care of that, because
3741 + * retlen == desired len and result == -EIO
3742 + */
3743 + *retlen = read;
3744 + return ecc_failed ? -EIO : 0;
3745 +}
3746 +
3747 +/*
3748 + * Wait for command done. This applies to erase and program only
3749 + * Erase can take up to 400ms and program up to 20ms according to
3750 + * general NAND and SmartMedia specs
3751 + *
3752 +*/
3753 +static int sl2312_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this, int state)
3754 +{
3755 + unsigned long timeo = jiffies;
3756 + int status, opcode;
3757 +
3758 + if (state == FL_ERASING)
3759 + timeo += (HZ * 400) / 1000;
3760 + else
3761 + timeo += (HZ * 20) / 1000;
3762 +
3763 + spin_lock_bh (&this->chip_lock);
3764 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000); //set 31b = 0
3765 + FLASH_WRITE_REG(NFLASH_COUNT, 0x007f000070); //set only command no address and two data
3766 +
3767 + FLASH_WRITE_REG(NFLASH_CMD_ADDR, 0x00000070); //write read status command
3768 +
3769 +
3770 + opcode = 0x80002000|DWIDTH|CHIP_EN; //set start bit & 8bits read command
3771 + FLASH_WRITE_REG(NFLASH_ACCESS, opcode);
3772 +
3773 + while(opcode&0x80000000) //polling flash access 31b
3774 + {
3775 + opcode=FLASH_READ_REG(NFLASH_ACCESS);
3776 + //sl2312_flash_delay();
3777 + schedule();
3778 + }
3779 +
3780 + while (time_before(jiffies, timeo)) {
3781 + /* Check, if we were interrupted */
3782 + if (this->state != state) {
3783 + spin_unlock_bh (&this->chip_lock);
3784 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
3785 + return 0;
3786 + }
3787 + if (this->dev_ready) {
3788 + if (this->dev_ready(mtd))
3789 + break;
3790 + }
3791 + if (FLASH_READ_REG(NFLASH_DATA) & 0x40)
3792 + break;
3793 +
3794 + spin_unlock_bh (&this->chip_lock);
3795 + yield ();
3796 + spin_lock_bh (&this->chip_lock);
3797 + }
3798 + status = FLASH_READ_REG(NFLASH_DATA)&0xff;
3799 + spin_unlock_bh (&this->chip_lock);
3800 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
3801 + return status;
3802 +}
3803 +
3804 +static int sl2312_nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
3805 +{
3806 + int i, col, page, j=0;
3807 + //int erase_state = 0;
3808 + struct nand_chip *this = mtd->priv;
3809 + u_char *databuf, *oobbuf;
3810 +
3811 + databuf = &this->data_buf[0];
3812 + oobbuf = &this->data_buf[mtd->oobblock];
3813 + for (i = 0; i < mtd->oobsize; i++)
3814 + oobbuf[i] = 0xff;
3815 +
3816 + DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
3817 +
3818 + /* Shift to get page */
3819 + page = ((int) from) >> this->page_shift;
3820 +
3821 + /* Mask to get column */
3822 + col = from & (mtd->oobsize-1); //0x0f;
3823 +
3824 + /* Initialize return length value */
3825 + *retlen = 0;
3826 + sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
3827 + for(i=col,j=0;i<mtd->oobsize||i<(col+len);i++,j++)
3828 + buf[j] = oobbuf[i];
3829 +
3830 + *retlen = j ;
3831 + return 0;
3832 +}
3833 +
3834 +#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
3835 +/*
3836 +* Use NAND write ECC
3837 +*/
3838 +static int sl2312_nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
3839 +{
3840 + return (sl2312_nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
3841 +}
3842 +
3843 +/*
3844 + * NAND write with ECC
3845 + */
3846 +static int sl2312_nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
3847 + size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
3848 +{
3849 + int page, ret = 0, oob = 0, written = 0;
3850 + struct nand_chip *this = mtd->priv;
3851 +
3852 + DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
3853 +
3854 +
3855 + /* Do not allow write past end of device */
3856 + if ((to + len) > mtd->size) {
3857 + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
3858 + return -EINVAL;
3859 + }
3860 +
3861 + /* reject writes, which are not page aligned */
3862 + if (NOTALIGNED (to) || NOTALIGNED(len)) {
3863 + printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
3864 + return -EINVAL;
3865 + }
3866 +
3867 + // if oobsel is NULL, use chip defaults
3868 + if (oobsel == NULL)
3869 + oobsel = &mtd->oobinfo;
3870 +
3871 + /* Shift to get page */
3872 + page = ((int) to) >> this->page_shift;
3873 +
3874 + /* Grab the lock and see if the device is available */
3875 + sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
3876 +
3877 + /* Select the NAND device */
3878 + this->select_chip(mtd, 0);
3879 +
3880 + /* Check the WP bit */
3881 + if (!(sl2312_device_ready(mtd) & 0x80)) {
3882 + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Device is write protected!!!\n");
3883 + ret = -EIO;
3884 + goto out;
3885 + }
3886 +
3887 + /* Loop until all data is written */
3888 + while (written < len) {
3889 + //udelay(100);
3890 + int cnt = mtd->oobblock;
3891 + this->data_poi = (u_char*) &buf[written];
3892 + /* We use the same function for write and writev */
3893 + if (eccbuf) {
3894 + ret = sl2312_nand_write_page (mtd, this, page, &eccbuf[oob], oobsel);
3895 + oob += mtd->oobsize;
3896 + } else
3897 + ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
3898 +
3899 + if (ret)
3900 + goto out;
3901 +
3902 + /* Update written bytes count */
3903 + written += cnt;
3904 + /* Increment page address */
3905 + page++;
3906 + }
3907 +
3908 +out:
3909 + /* De-select the NAND device */
3910 + //this->select_chip(mtd, -1);
3911 +
3912 + /* Wake up anyone waiting on the device */
3913 + spin_lock_bh (&this->chip_lock);
3914 + this->state = FL_READY;
3915 + wake_up (&this->wq);
3916 + spin_unlock_bh (&this->chip_lock);
3917 +
3918 + *retlen = written;
3919 + return ret;
3920 +}
3921 +
3922 +/*
3923 + * Nand_page_program function is used for write and writev !
3924 + * This function will always program a full page of data
3925 + * If you call it with a non page aligned buffer, you're lost :)
3926 + */
3927 +static int sl2312_nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, struct nand_oobinfo *oobsel)
3928 +{
3929 + int i, j, status, opcode;
3930 + u_char ecc_code[16], *oob_data;
3931 + int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
3932 + //int *oob_config = oobsel->eccpos;
3933 +
3934 + /* pad oob area, if we have no oob buffer from fs-driver */
3935 + if (!oob_buf) {
3936 + oob_data = &this->data_buf[mtd->oobblock];
3937 + for (i = 0; i < mtd->oobsize; i++)
3938 + oob_data[i] = 0xff;
3939 + } else
3940 + oob_data = oob_buf;
3941 +
3942 + /* Send command to begin auto page programming */
3943 +
3944 + memset(oob_data,0xff,mtd->oobsize);
3945 + /* Write out complete page of data, take care of eccmode */
3946 + switch (eccmode) {
3947 + /* No ecc and software ecc 3/256, write all */
3948 + case NAND_ECC_NONE:
3949 + printk (KERN_WARNING "Writing data without ECC to NAND-FLASH is not recommended\n");
3950 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
3951 + break;
3952 + case NAND_ECC_SOFT:
3953 + break;
3954 +
3955 + /* Hardware ecc 3 byte / 256 data, write first half, get ecc, then second, if 512 byte pagesize */
3956 + case NAND_ECC_HW3_256:
3957 + break;
3958 +
3959 + /* Hardware ecc 3 byte / 512 byte data, write full page */
3960 + case NAND_ECC_HW3_512:
3961 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x80000001); //set 31b = 0
3962 +
3963 + /* Hardware ecc 6 byte / 512 byte data, write full page */
3964 + case NAND_ECC_HW6_512:
3965 + break;
3966 +
3967 + default:
3968 + printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
3969 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
3970 + //BUG();
3971 + }
3972 +
3973 + FLASH_WRITE_REG(NFLASH_ACCESS, NFLASH_DIRECT);
3974 +
3975 + for(i=0;i<mtd->oobblock;i++)
3976 + {
3977 + //udelay(5);
3978 + FLASH_WRITE_DATA((page*mtd->oobblock)+i,this->data_poi[i]);
3979 + }
3980 + ///////////////
3981 + if(eccmode!=NAND_ECC_NONE)
3982 + {
3983 + opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
3984 + while(!(opcode&0x80000000)) //polling flash access 31b
3985 + {
3986 + opcode=FLASH_READ_REG(NFLASH_ECC_STATUS);
3987 + //sl2312_flash_delay();
3988 + schedule();
3989 + }
3990 +
3991 +
3992 + for(i=0;i<(mtd->oobblock/512);i++)
3993 + {
3994 + opcode=FLASH_READ_REG(NFLASH_ECC_CODE_GEN0+(i*4));
3995 +
3996 + for(j=3;j>0;j--)
3997 + oob_data[(mtd->oobsize-j-(i*4))] = (opcode<<((4-j)*8)) >>24;
3998 +
3999 + for(j=0;j<4;j++)
4000 + {
4001 + ecc_code[15-i*4] = opcode;
4002 + ecc_code[15-i*4-1] = opcode>>8;
4003 + ecc_code[15-i*4-2] = opcode>>16;
4004 + }
4005 + }
4006 +
4007 + //disable ecc
4008 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x00000000);
4009 +
4010 + /* Write out OOB data */
4011 + for(i=0;i<mtd->oobsize;i++)
4012 + {
4013 + //udelay(5);
4014 + FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,oob_data[i]);
4015 + }
4016 + }
4017 + else
4018 + {
4019 + for(i=0;i<mtd->oobsize;i++)
4020 + {
4021 + //udelay(5);
4022 + FLASH_WRITE_DATA((page*mtd->oobblock)+mtd->oobblock+i,0xff);
4023 + }
4024 + }
4025 +
4026 +
4027 + /* call wait ready function */
4028 + status = this->waitfunc (mtd, this, FL_WRITING);
4029 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
4030 + /* See if device thinks it succeeded */
4031 + if (status & 0x01) {
4032 + DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
4033 + FLASH_WRITE_REG(NFLASH_ECC_CONTROL, 0x0); //set 31b = 0
4034 + return -EIO;
4035 + }
4036 +
4037 +#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
4038 + /*
4039 + * The NAND device assumes that it is always writing to
4040 + * a cleanly erased page. Hence, it performs its internal
4041 + * write verification only on bits that transitioned from
4042 + * 1 to 0. The device does NOT verify the whole page on a
4043 + * byte by byte basis. It is possible that the page was
4044 + * not completely erased or the page is becoming unusable
4045 + * due to wear. The read with ECC would catch the error
4046 + * later when the ECC page check fails, but we would rather
4047 + * catch it early in the page write stage. Better to write
4048 + * no data than invalid data.
4049 + */
4050 +
4051 + /* Send command to read back the page */
4052 + this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
4053 + /* Loop through and verify the data */
4054 + if (this->verify_buf(mtd, this->data_poi, mtd->oobblock)) {
4055 + DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
4056 + return -EIO;
4057 + }
4058 +
4059 + /* check, if we have a fs-supplied oob-buffer */
4060 + if (oob_buf) {
4061 + if (this->verify_buf(mtd, oob_data, mtd->oobsize)) {
4062 + DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
4063 + return -EIO;
4064 + }
4065 + } else {
4066 + if (eccmode != NAND_ECC_NONE) {
4067 + int ecc_bytes = 0;
4068 +
4069 + switch (this->eccmode) {
4070 + case NAND_ECC_SOFT:
4071 + case NAND_ECC_HW3_256: ecc_bytes = (mtd->oobblock == 512) ? 6 : 3; break;
4072 + case NAND_ECC_HW3_512: ecc_bytes = 3; break;
4073 + case NAND_ECC_HW6_512: ecc_bytes = 6; break;
4074 + }
4075 +
4076 +
4077 +
4078 + for(i=0;i < (mtd->oobblock+mtd->oobsize);i++)
4079 + {
4080 + if(i>=mtd->oobblock)
4081 + oob_data[i-mtd->oobblock] = FLASH_READ_DATA((page*mtd->oobblock) +i);
4082 + else
4083 + oob_data[0] = FLASH_READ_DATA((page*mtd->oobblock) +i);
4084 + }
4085 +
4086 + if(this->eccmode == NAND_ECC_HW3_512)
4087 + {
4088 + for(i=0;i<(mtd->oobblock/512);i++)
4089 + {
4090 + for(j=0;j<3;j++)
4091 + {
4092 + if (oob_data[mtd->oobsize-1-j-4*i] != ecc_code[15-j-4*i]) {
4093 + DEBUG (MTD_DEBUG_LEVEL0,
4094 + "%s: Failed ECC write "
4095 + "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
4096 + return -EIO;
4097 + }
4098 + }
4099 + }
4100 + }
4101 + }//eccmode != NAND_ECC_NONE
4102 + }
4103 + /*
4104 + * Terminate the read command. This is faster than sending a reset command or
4105 + * applying a 20us delay before issuing the next programm sequence.
4106 + * This is not a problem for all chips, but I have found a bunch of them.
4107 + */
4108 + //this->select_chip(mtd, -1);
4109 + //this->select_chip(mtd, 0);
4110 +#endif
4111 +
4112 + return 0;
4113 +}
4114 +
4115 +/*
4116 + * NAND write with iovec
4117 + */
4118 +static int sl2312_nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
4119 + loff_t to, size_t * retlen)
4120 +{
4121 + return (sl2312_nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, 0));
4122 +}
4123 +
4124 +static int sl2312_nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
4125 + loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
4126 +{
4127 + int i, page, len, total_len, ret = 0, written = 0;
4128 + struct nand_chip *this = mtd->priv;
4129 +
4130 + /* Calculate total length of data */
4131 + total_len = 0;
4132 + for (i = 0; i < count; i++)
4133 + total_len += (int) vecs[i].iov_len;
4134 +
4135 + DEBUG (MTD_DEBUG_LEVEL3,
4136 + "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
4137 +
4138 + /* Do not allow write past end of page */
4139 + if ((to + total_len) > mtd->size) {
4140 + DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
4141 + return -EINVAL;
4142 + }
4143 +
4144 + /* reject writes, which are not page aligned */
4145 + if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
4146 + printk (KERN_NOTICE "nand_write_ecc: Attempt to write not page aligned data\n");
4147 + return -EINVAL;
4148 + }
4149 +
4150 + // if oobsel is NULL, use chip defaults
4151 + if (oobsel == NULL)
4152 + oobsel = &mtd->oobinfo;
4153 +
4154 + /* Shift to get page */
4155 + page = ((int) to) >> this->page_shift;
4156 +
4157 + /* Grab the lock and see if the device is available */
4158 + sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
4159 +
4160 + /* Select the NAND device */
4161 + this->select_chip(mtd, 0);
4162 +
4163 + /* Check the WP bit */
4164 + if (!(sl2312_device_ready(mtd) & 0x80)) {
4165 + DEBUG (MTD_DEBUG_LEVEL0, "sl2312_nand_writev_ecc: Device is write protected!!!\n");
4166 + ret = -EIO;
4167 + goto out;
4168 + }
4169 +
4170 + /* Loop until all iovecs' data has been written */
4171 + len = 0;
4172 + while (count) {
4173 + /*
4174 + * Check, if the tuple gives us not enough data for a
4175 + * full page write. Then we can use the iov direct,
4176 + * else we have to copy into data_buf.
4177 + */
4178 + if ((vecs->iov_len - len) >= mtd->oobblock) {
4179 + this->data_poi = (u_char *) vecs->iov_base;
4180 + this->data_poi += len;
4181 + len += mtd->oobblock;
4182 + /* Check, if we have to switch to the next tuple */
4183 + if (len >= (int) vecs->iov_len) {
4184 + vecs++;
4185 + len = 0;
4186 + count--;
4187 + }
4188 + } else {
4189 + /*
4190 + * Read data out of each tuple until we have a full page
4191 + * to write or we've read all the tuples.
4192 + */
4193 + int cnt = 0;
4194 + while ((cnt < mtd->oobblock) && count) {
4195 + if (vecs->iov_base != NULL && vecs->iov_len) {
4196 + this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
4197 + }
4198 + /* Check, if we have to switch to the next tuple */
4199 + if (len >= (int) vecs->iov_len) {
4200 + vecs++;
4201 + len = 0;
4202 + count--;
4203 + }
4204 + }
4205 + this->data_poi = this->data_buf;
4206 + }
4207 +
4208 + /* We use the same function for write and writev !) */
4209 + ret = sl2312_nand_write_page (mtd, this, page, NULL, oobsel);
4210 + if (ret)
4211 + goto out;
4212 +
4213 + /* Update written bytes count */
4214 + written += mtd->oobblock;;
4215 +
4216 + /* Increment page address */
4217 + page++;
4218 + }
4219 +
4220 +out:
4221 + /* De-select the NAND device */
4222 + //this->select_chip(mtd, -1);
4223 +
4224 + /* Wake up anyone waiting on the device */
4225 + spin_lock_bh (&this->chip_lock);
4226 + this->state = FL_READY;
4227 + wake_up (&this->wq);
4228 + spin_unlock_bh (&this->chip_lock);
4229 +
4230 + *retlen = written;
4231 + return ret;
4232 +}
4233 +
4234 +/*
4235 +static u_char ffchars[] = {
4236 + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
4237 + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
4238 +};
4239 +*/
4240 +/*
4241 + * NAND write out-of-band
4242 + */
4243 +static int sl2312_nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
4244 +{
4245 + int column, page, status, ret = 0, j=0;
4246 + struct nand_chip *this = mtd->priv;
4247 + u_char *databuf, *oobbuf;
4248 +
4249 +
4250 + databuf = &this->data_buf[0];
4251 + oobbuf = &this->data_buf[mtd->oobblock];
4252 + for (j = 0; j < mtd->oobsize; j++)
4253 + oobbuf[j] = 0xff;
4254 +//#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
4255 +// int i;
4256 +//#endif
4257 +
4258 + DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
4259 +
4260 + /* Shift to get page */
4261 + page = ((int) to) >> this->page_shift;
4262 +
4263 + /* Mask to get column */
4264 + column = to & 0x1f;
4265 +
4266 + /* Initialize return length value */
4267 + *retlen = 0;
4268 +
4269 + /* Do not allow write past end of page */
4270 + if ((column + len) > mtd->oobsize) {
4271 + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
4272 + return -EINVAL;
4273 + }
4274 +
4275 + /* Grab the lock and see if the device is available */
4276 + sl2312_nand_get_chip (this, mtd, FL_WRITING, NULL);
4277 +
4278 + /* Select the NAND device */
4279 + this->select_chip(mtd, 0);
4280 +
4281 + /* Reset the chip. Some chips (like the Toshiba TC5832DC found
4282 + in one of my DiskOnChip 2000 test units) will clear the whole
4283 + data page too if we don't do this. I have no clue why, but
4284 + I seem to have 'fixed' it in the doc2000 driver in
4285 + August 1999. dwmw2. */
4286 + this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
4287 +
4288 + /* Check the WP bit */
4289 + if (!(sl2312_device_ready(mtd) & 0x80)) {
4290 + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Device is write protected!!!\n");
4291 + ret = -EIO;
4292 + goto out;
4293 + }
4294 + /* Write out desired data */
4295 + this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page);
4296 +
4297 + sl2312_nand_read_ecc (mtd, page, mtd->oobblock , retlen, databuf, oobbuf, NULL);
4298 +
4299 + for(j=column;j<(column+len);j++)
4300 + oobbuf[j] = buf[j-column];
4301 + sl2312_nand_write_ecc (mtd, page, mtd->oobblock, retlen, databuf, oobbuf, NULL);
4302 +
4303 + status = this->waitfunc (mtd, this, FL_WRITING);
4304 +
4305 + /* See if device thinks it succeeded */
4306 + if (status & 0x01) {
4307 + DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
4308 + ret = -EIO;
4309 + goto out;
4310 + }
4311 + /* Return happy */
4312 + *retlen = len;
4313 +
4314 +
4315 +out:
4316 + /* De-select the NAND device */
4317 + //this->select_chip(mtd, -1);
4318 +
4319 + /* Wake up anyone waiting on the device */
4320 + spin_lock_bh (&this->chip_lock);
4321 + this->state = FL_READY;
4322 + wake_up (&this->wq);
4323 + spin_unlock_bh (&this->chip_lock);
4324 +
4325 + return ret;
4326 +}
4327 +
4328 +/*
4329 + * NAND sync
4330 + */
4331 +static void sl2312_nand_sync (struct mtd_info *mtd)
4332 +{
4333 + struct nand_chip *this = mtd->priv;
4334 + DECLARE_WAITQUEUE (wait, current);
4335 +
4336 + DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
4337 +
4338 +retry:
4339 + /* Grab the spinlock */
4340 + spin_lock_bh (&this->chip_lock);
4341 +
4342 + /* See what's going on */
4343 + switch (this->state) {
4344 + case FL_READY:
4345 + case FL_SYNCING:
4346 + this->state = FL_SYNCING;
4347 + spin_unlock_bh (&this->chip_lock);
4348 + break;
4349 +
4350 + default:
4351 + /* Not an idle state */
4352 + add_wait_queue (&this->wq, &wait);
4353 + spin_unlock_bh (&this->chip_lock);
4354 + schedule ();
4355 +
4356 + remove_wait_queue (&this->wq, &wait);
4357 + goto retry;
4358 + }
4359 +
4360 + /* Lock the device */
4361 + spin_lock_bh (&this->chip_lock);
4362 +
4363 + /* Set the device to be ready again */
4364 + if (this->state == FL_SYNCING) {
4365 + this->state = FL_READY;
4366 + wake_up (&this->wq);
4367 + }
4368 +
4369 + /* Unlock the device */
4370 + spin_unlock_bh (&this->chip_lock);
4371 +}
4372 +
4373 +
4374 +/*
4375 + * Scan for the NAND device
4376 + */
4377 +int sl2312_nand_scan (struct mtd_info *mtd, int maxchips)
4378 +{
4379 + int i, j, nand_maf_id, nand_dev_id, busw;
4380 + struct nand_chip *this = mtd->priv;
4381 + unsigned char id[4];
4382 +
4383 + /* Get buswidth to select the correct functions*/
4384 + busw = this->options & NAND_BUSWIDTH_16;
4385 +
4386 + /* check for proper chip_delay setup, set 20us if not */
4387 + if (!this->chip_delay)
4388 + this->chip_delay = 20;
4389 +
4390 + /* check, if a user supplied command function given */
4391 + if (this->cmdfunc == NULL)
4392 + this->cmdfunc = sl2312_nand_command;
4393 +
4394 + /* check, if a user supplied wait function given */
4395 + if (this->waitfunc == NULL)
4396 + this->waitfunc = sl2312_nand_waitfunc;
4397 +
4398 + if (!this->select_chip)
4399 + this->select_chip = sl2312_nand_select_chip;
4400 + if (!this->write_byte)
4401 + this->write_byte = sl2312_nand_write_byte; //busw ? nand_write_byte16 : nand_write_byte;
4402 + if (!this->read_byte)
4403 + this->read_byte = sl2312_nand_read_byte; //busw ? nand_read_byte16 : nand_read_byte;
4404 +// if (!this->write_word)
4405 +// this->write_word = nand_write_word;
4406 +// if (!this->read_word)
4407 +// this->read_word = nand_read_word;
4408 +// if (!this->block_bad)
4409 + this->block_bad = sl2312_nand_block_bad; //nand_block_bad;
4410 + if (!this->block_markbad)
4411 + this->block_markbad = sl2312_nand_default_block_markbad;
4412 + if (!this->write_buf)
4413 + this->write_buf = sl2312_nand_write_buf; //busw ? nand_write_buf16 : nand_write_buf;
4414 + if (!this->read_buf)
4415 + this->read_buf = sl2312_nand_read_buf; //busw ? nand_read_buf16 : nand_read_buf;
4416 + if (!this->verify_buf)
4417 + this->verify_buf = sl2312_nand_verify_buf; //busw ? nand_verify_buf16 : nand_verify_buf;
4418 + if (!this->scan_bbt)
4419 + this->scan_bbt = sl2312_nand_scan_bbt;
4420 +
4421 + /* Select the device */
4422 + this->select_chip(mtd, 0);
4423 +
4424 + /* Read manufacturer and device IDs */
4425 + nand_read_id(0,id);
4426 +
4427 + nand_maf_id = id[0];
4428 + nand_dev_id = id[1];
4429 +
4430 + /* Print and store flash device information */
4431 + for (i = 0; nand_flash_ids[i].name != NULL; i++) {
4432 +
4433 + if (nand_dev_id != nand_flash_ids[i].id)
4434 + continue;
4435 +
4436 + if (!mtd->name) mtd->name = nand_flash_ids[i].name;
4437 + this->chipsize = nand_flash_ids[i].chipsize << 20;
4438 +
4439 + /* New devices have all the information in additional id bytes */
4440 + if (!nand_flash_ids[i].pagesize) {
4441 + int extid;
4442 +
4443 + /* The 4th id byte is the important one */
4444 + extid = id[3];
4445 + /* Calc pagesize */
4446 + mtd->oobblock = 1024 << (extid & 0x3);
4447 + extid >>= 2;
4448 + /* Calc oobsize */
4449 + mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512);
4450 + extid >>= 2;
4451 + /* Calc blocksize. Blocksize is multiples of 64KiB */
4452 + mtd->erasesize = (64 * 1024) << (extid & 0x03);
4453 + extid >>= 2;
4454 + /* Get buswidth information */
4455 + busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
4456 +
4457 + } else {
4458 + /* Old devices have this data hardcoded in the
4459 + * device id table */
4460 + mtd->erasesize = nand_flash_ids[i].erasesize;
4461 + mtd->oobblock = nand_flash_ids[i].pagesize;
4462 + mtd->oobsize = mtd->oobblock / 32;
4463 + busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
4464 + }
4465 +
4466 + /* Check, if buswidth is correct. Hardware drivers should set
4467 + * this correct ! */
4468 + if (busw != (this->options & NAND_BUSWIDTH_16)) {
4469 + printk (KERN_INFO "NAND device: Manufacturer ID:"
4470 + " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
4471 + nand_manuf_ids[i].name , mtd->name);
4472 + printk (KERN_WARNING
4473 + "NAND bus width %d instead %d bit\n",
4474 + (this->options & NAND_BUSWIDTH_16) ? 16 : 8,
4475 + busw ? 16 : 8);
4476 + this->select_chip(mtd, -1);
4477 + return 1;
4478 + }
4479 +
4480 + /* Calculate the address shift from the page size */
4481 + this->page_shift = ffs(mtd->oobblock) - 1;
4482 + this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
4483 + this->chip_shift = ffs(this->chipsize) - 1;
4484 +
4485 + /* Set the bad block position */
4486 + this->badblockpos = mtd->oobblock > 512 ?
4487 + NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
4488 +
4489 + /* Get chip options, preserve non chip based options */
4490 + this->options &= ~NAND_CHIPOPTIONS_MSK;
4491 + this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
4492 + /* Set this as a default. Board drivers can override it, if neccecary */
4493 + this->options |= NAND_NO_AUTOINCR;
4494 + /* Check if this is a not a samsung device. Do not clear the options
4495 + * for chips which are not having an extended id.
4496 + */
4497 + if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
4498 + this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
4499 +
4500 + /* Check for AND chips with 4 page planes */
4501 + // if (this->options & NAND_4PAGE_ARRAY)
4502 + // this->erase_cmd = multi_erase_cmd;
4503 + // else
4504 + // this->erase_cmd = single_erase_cmd;
4505 +
4506 + /* Do not replace user supplied command function ! */
4507 + // if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
4508 + // this->cmdfunc = nand_command_lp;
4509 +
4510 + /* Try to identify manufacturer */
4511 + for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
4512 + if (nand_manuf_ids[j].id == nand_maf_id)
4513 + break;
4514 + }
4515 + printk (KERN_INFO "NAND device: Manufacturer ID:"
4516 + " 0x%02x, Chip ID: 0x%02x (%s %s)\n", nand_maf_id, nand_dev_id,
4517 + nand_manuf_ids[j].name , nand_flash_ids[i].name);
4518 + break;
4519 + }
4520 + /////////////////////////////
4521 +
4522 + for (i=1; i < maxchips; i++) {
4523 + this->select_chip(mtd, i);
4524 +
4525 + /* Send the command for reading device ID */
4526 + nand_read_id(1,id);
4527 +
4528 + /* Read manufacturer and device IDs */
4529 + if (nand_maf_id != id[0] ||
4530 + nand_dev_id != id[1])
4531 + break;
4532 + }
4533 + if (i > 1)
4534 + printk(KERN_INFO "%d NAND chips detected\n", i);
4535 +
4536 + /* Allocate buffers, if neccecary */
4537 + if (!this->oob_buf) {
4538 + size_t len;
4539 + len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
4540 + this->oob_buf = kmalloc (len, GFP_KERNEL);
4541 + if (!this->oob_buf) {
4542 + printk (KERN_ERR "nand_scan(): Cannot allocate oob_buf\n");
4543 + return -ENOMEM;
4544 + }
4545 + this->options |= NAND_OOBBUF_ALLOC;
4546 + }
4547 +
4548 + if (!this->data_buf) {
4549 + size_t len;
4550 + len = mtd->oobblock + mtd->oobsize;
4551 + this->data_buf = kmalloc (len, GFP_KERNEL);
4552 + if (!this->data_buf) {
4553 + if (this->options & NAND_OOBBUF_ALLOC)
4554 + kfree (this->oob_buf);
4555 + printk (KERN_ERR "nand_scan(): Cannot allocate data_buf\n");
4556 + return -ENOMEM;
4557 + }
4558 + this->options |= NAND_DATABUF_ALLOC;
4559 + }
4560 +
4561 + /* Store the number of chips and calc total size for mtd */
4562 + this->numchips = i;
4563 + mtd->size = i * this->chipsize;
4564 + /* Convert chipsize to number of pages per chip -1. */
4565 + this->pagemask = (this->chipsize >> this->page_shift) - 1;
4566 + /* Preset the internal oob buffer */
4567 + memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
4568 +
4569 + /* If no default placement scheme is given, select an
4570 + * appropriate one */
4571 + if (!this->autooob) {
4572 + /* Select the appropriate default oob placement scheme for
4573 + * placement agnostic filesystems */
4574 + switch (mtd->oobsize) {
4575 + case 8:
4576 + this->autooob = &nand_oob_8;
4577 + break;
4578 + case 16:
4579 + this->autooob = &nand_oob_16;
4580 + break;
4581 + case 64:
4582 + this->autooob = &nand_oob_64;
4583 + break;
4584 + default:
4585 + printk (KERN_WARNING "No oob scheme defined for oobsize %d\n",
4586 + mtd->oobsize);
4587 + BUG();
4588 + }
4589 + }
4590 +
4591 + /* The number of bytes available for the filesystem to place fs dependend
4592 + * oob data */
4593 + if (this->options & NAND_BUSWIDTH_16) {
4594 + mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 2);
4595 + if (this->autooob->eccbytes & 0x01)
4596 + mtd->oobavail--;
4597 + } else
4598 + mtd->oobavail = mtd->oobsize - (this->autooob->eccbytes + 1);
4599 +
4600 +
4601 + /*
4602 + * check ECC mode, default to software
4603 + * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
4604 + * fallback to software ECC
4605 + */
4606 + this->eccsize = 256; /* set default eccsize */
4607 + this->eccbytes = 3;
4608 +
4609 + switch (this->eccmode) {
4610 + case NAND_ECC_HW12_2048:
4611 + if (mtd->oobblock < 2048) {
4612 + printk(KERN_WARNING "2048 byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
4613 + mtd->oobblock);
4614 + this->eccmode = NAND_ECC_SOFT;
4615 + this->calculate_ecc = nand_calculate_ecc;
4616 + this->correct_data = nand_correct_data;
4617 + } else
4618 + this->eccsize = 2048;
4619 + break;
4620 +
4621 + case NAND_ECC_HW3_512:
4622 + case NAND_ECC_HW6_512:
4623 + case NAND_ECC_HW8_512:
4624 + if (mtd->oobblock == 256) {
4625 + printk (KERN_WARNING "512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC \n");
4626 + this->eccmode = NAND_ECC_SOFT;
4627 + this->calculate_ecc = nand_calculate_ecc;
4628 + this->correct_data = nand_correct_data;
4629 + } else
4630 + this->eccsize = 512; /* set eccsize to 512 */
4631 + break;
4632 +
4633 + case NAND_ECC_HW3_256:
4634 + break;
4635 +
4636 + case NAND_ECC_NONE:
4637 + printk (KERN_WARNING "NAND_ECC_NONE selected by board driver. This is not recommended !!\n");
4638 + this->eccmode = NAND_ECC_NONE;
4639 + break;
4640 +
4641 + case NAND_ECC_SOFT:
4642 + this->calculate_ecc = nand_calculate_ecc;
4643 + this->correct_data = nand_correct_data;
4644 + break;
4645 +
4646 + default:
4647 + printk (KERN_WARNING "Invalid NAND_ECC_MODE %d\n", this->eccmode);
4648 + BUG();
4649 + }
4650 +
4651 + /* Check hardware ecc function availability and adjust number of ecc bytes per
4652 + * calculation step
4653 + */
4654 + switch (this->eccmode) {
4655 + case NAND_ECC_HW12_2048:
4656 + this->eccbytes += 4;
4657 + case NAND_ECC_HW8_512:
4658 + this->eccbytes += 2;
4659 + case NAND_ECC_HW6_512:
4660 + this->eccbytes += 3;
4661 +// case NAND_ECC_HW3_512:
4662 + case NAND_ECC_HW3_256:
4663 + if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
4664 + break;
4665 + printk (KERN_WARNING "No ECC functions supplied, Hardware ECC not possible\n");
4666 + BUG();
4667 + }
4668 +
4669 + mtd->eccsize = this->eccsize;
4670 +
4671 + /* Set the number of read / write steps for one page to ensure ECC generation */
4672 + switch (this->eccmode) {
4673 + case NAND_ECC_HW12_2048:
4674 + this->eccsteps = mtd->oobblock / 2048;
4675 + break;
4676 + case NAND_ECC_HW3_512:
4677 + case NAND_ECC_HW6_512:
4678 + case NAND_ECC_HW8_512:
4679 + this->eccsteps = mtd->oobblock / 512;
4680 + break;
4681 + case NAND_ECC_HW3_256:
4682 + case NAND_ECC_SOFT:
4683 + this->eccsteps = mtd->oobblock / 256;
4684 + break;
4685 +
4686 + case NAND_ECC_NONE:
4687 + this->eccsteps = 1;
4688 + break;
4689 + }
4690 +
4691 + /* Initialize state, waitqueue and spinlock */
4692 + this->state = FL_READY;
4693 + init_waitqueue_head (&this->wq);
4694 + spin_lock_init (&this->chip_lock);
4695 +
4696 + /* De-select the device */
4697 + this->select_chip(mtd, 0);
4698 +
4699 + /* Print warning message for no device */
4700 + if (!mtd->size) {
4701 + printk (KERN_WARNING "No NAND device found!!!\n");
4702 + return 1;
4703 + }
4704 +
4705 + /* Fill in remaining MTD driver data */
4706 + mtd->type = MTD_NANDFLASH;
4707 + mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
4708 + mtd->ecctype = MTD_ECC_SW;
4709 + mtd->erase = sl2312_nand_erase;
4710 + mtd->point = NULL;
4711 + mtd->unpoint = NULL;
4712 + mtd->read = sl2312_nand_read;
4713 + mtd->write = sl2312_nand_write;
4714 + mtd->read_ecc = sl2312_nand_read_ecc;
4715 + mtd->write_ecc = sl2312_nand_write_ecc;
4716 + mtd->read_oob = sl2312_nand_read_oob;
4717 + mtd->write_oob = sl2312_nand_write_oob;
4718 + mtd->readv = NULL;
4719 + mtd->writev = sl2312_nand_writev;
4720 + mtd->writev_ecc = sl2312_nand_writev_ecc;
4721 + mtd->sync = sl2312_nand_sync;
4722 + mtd->lock = NULL;
4723 + mtd->unlock = NULL;
4724 + mtd->suspend = NULL;
4725 + mtd->resume = NULL;
4726 + mtd->block_isbad = sl2312_nand_block_isbad;
4727 + mtd->block_markbad = sl2312_nand_block_markbad;
4728 +
4729 + /* and make the autooob the default one */
4730 + memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
4731 +
4732 + mtd->owner = THIS_MODULE;
4733 +
4734 + /* Build bad block table */
4735 + return this->scan_bbt (mtd);
4736 +}
4737 +
4738 +/*End Add function*/
4739 +
4740 +/*
4741 + * Main initialization routine
4742 + */
4743 +extern int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
4744 +
4745 +int __init sl2312_mtd_init (void)
4746 +{
4747 + struct nand_chip *this;
4748 + int err = 0;
4749 + struct mtd_partition *parts;
4750 + int nr_parts = 0;
4751 + int ret, data, *base;
4752 +
4753 + printk("NAND MTD Driver Start Init ......\n");
4754 +
4755 + base = (unsigned int *)(IO_ADDRESS(SL2312_GLOBAL_BASE) + 0x30);
4756 + data = *base;
4757 + data&=0xffffffeb;
4758 + data|=0x3; //disable p & s flash
4759 + *base = data;
4760 +
4761 + /* Allocate memory for MTD device structure and private data */
4762 + sl2312_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
4763 + if (!sl2312_mtd) {
4764 + printk ("Unable to allocate SL2312 NAND MTD device structure.\n");
4765 + err = -ENOMEM;
4766 + goto out;
4767 + }
4768 +
4769 + // sl2312_device_setup();
4770 +
4771 + /* io is indirect via a register so don't need to ioremap address */
4772 +
4773 + /* Get pointer to private data */
4774 + this = (struct nand_chip *) (&sl2312_mtd[1]);
4775 +
4776 + /* Initialize structures */
4777 + memset((char *) sl2312_mtd, 0, sizeof(struct mtd_info));
4778 + memset((char *) this, 0, sizeof(struct nand_chip));
4779 +
4780 + /* Link the private data with the MTD structure */
4781 + sl2312_mtd->priv = this;
4782 + sl2312_mtd->name = "sl2312-nand";
4783 +
4784 + /* Set address of NAND IO lines */
4785 + this->IO_ADDR_R = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
4786 + this->IO_ADDR_W = (void __iomem *)IO_ADDRESS((SL2312_FLASH_CTRL_BASE+NFLASH_DATA)); //(unsigned long)&(sl2312_ndfmcptr->dtr);
4787 + this->read_byte = sl2312_nand_read_byte;
4788 + this->write_byte = sl2312_nand_write_byte;
4789 + this->write_buf = sl2312_nand_write_buf;
4790 + this->read_buf = sl2312_nand_read_buf;
4791 + this->verify_buf = sl2312_nand_verify_buf;
4792 + this->select_chip = sl2312_nand_select_chip;
4793 + this->block_bad = sl2312_nand_block_bad;
4794 + this->hwcontrol = sl2312_hwcontrol;
4795 + this->dev_ready = sl2312_device_ready;
4796 + this->cmdfunc = sl2312_nand_command;
4797 + this->waitfunc = sl2312_nand_waitfunc;
4798 + //this->calculate_ecc = sl2312_readecc;
4799 + this->enable_hwecc = sl2312_enable_hwecc;
4800 + this->eccmode = NAND_ECC_HW3_512;
4801 + /*this->eccsize = 512; */
4802 + /* 20 us command delay time */
4803 + this->chip_delay = 20;
4804 +
4805 + this->correct_data = nand_correct_data;
4806 +// this->scan_bbt = sl2312_nand_scan_bbt;
4807 +
4808 + /* Allocate memory for internal data buffer */
4809 + this->data_buf = kmalloc (sizeof(u_char) * (sl2312_mtd->oobblock + sl2312_mtd->oobsize), GFP_KERNEL);
4810 + if (!this->data_buf) {
4811 + printk ("Unable to allocate NAND data buffer.\n");
4812 + err = -ENOMEM;
4813 + goto out_ior;
4814 + }
4815 +
4816 + /* Scan to find existance of the device */
4817 + if (sl2312_nand_scan(sl2312_mtd, 1)) {
4818 + err = -ENXIO;
4819 + goto out_ior;
4820 + }
4821 +
4822 + /* Register the partitions */
4823 + parts = sl2312_partitions;
4824 + nr_parts = sizeof(sl2312_partitions)/sizeof(*parts);
4825 +
4826 + ret = add_mtd_partitions(sl2312_mtd, sl2312_partitions, nr_parts);
4827 + /*If we got an error, free all resources.*/
4828 + if (ret < 0) {
4829 + del_mtd_partitions(sl2312_mtd);
4830 + map_destroy(sl2312_mtd);
4831 + }
4832 + goto out;
4833 +
4834 +//out_buf:
4835 +// kfree (this->data_buf);
4836 +out_ior:
4837 +out:
4838 + printk("NAND MTD Driver Init Success ......\n");
4839 + return err;
4840 +}
4841 +
4842 +module_init(sl2312_mtd_init);
4843 +
4844 +/*
4845 + * Clean up routine
4846 + */
4847 +#ifdef MODULE
4848 +static void __exit sl2312_cleanup (void)
4849 +{
4850 + struct nand_chip *this = (struct nand_chip *) &sl2312_mtd[1];
4851 +
4852 + /* Unregister partitions */
4853 + del_mtd_partitions(sl2312_mtd);
4854 +
4855 + /* Unregister the device */
4856 + del_mtd_device (sl2312_mtd);
4857 +
4858 + /* Free internal data buffers */
4859 + kfree (this->data_buf);
4860 +
4861 + /* Free the MTD device structure */
4862 + kfree (sl2312_mtd);
4863 +}
4864 +module_exit(sl2312_cleanup);
4865 +#endif
4866 +
4867 +MODULE_LICENSE("GPL");
4868 +MODULE_AUTHOR("Alice Hennessy <ahennessy@mvista.com>");
4869 +MODULE_DESCRIPTION("Glue layer for SmartMediaCard on Toshiba RBsl2312");
4870 --- /dev/null
4871 +++ b/drivers/mtd/nand/sl2312-flash-nand.h
4872 @@ -0,0 +1,24 @@
4873 +#ifndef SL2312_FLASH_NAND_H
4874 +#define SL2312_FLASH_NAND_H
4875 +
4876 +#include <linux/wait.h>
4877 +#include <linux/spinlock.h>
4878 +
4879 +/*Add function*/
4880 +static void nand_read_id(int chip_no,unsigned char *id);
4881 +
4882 +
4883 +
4884 +#define NFLASH_WiDTH8 0x00000000
4885 +#define NFLASH_WiDTH16 0x00000400
4886 +#define NFLASH_WiDTH32 0x00000800
4887 +#define NFLASH_CHIP0_EN 0x00000000 // 16th bit = 0
4888 +#define NFLASH_CHIP1_EN 0x00010000 // 16th bit = 1
4889 +#define NFLASH_DIRECT 0x00004000
4890 +#define NFLASH_INDIRECT 0x00000000
4891 +
4892 +
4893 +#define DWIDTH NFLASH_WiDTH8
4894 +
4895 +
4896 +#endif /* SL2312_FLASH_NAND_H */
4897 --- /dev/null
4898 +++ b/include/linux/mtd/kvctl.h
4899 @@ -0,0 +1,40 @@
4900 +#ifndef KVCTL_H
4901 +#define KVCTL_H
4902 +
4903 +#define VCTL_HEAD_SIZE 8
4904 +#define VCTL_ENTRY_LEN 20
4905 +
4906 +typedef struct
4907 +{
4908 + char header[4];
4909 + unsigned int entry_num;
4910 +} vctl_mheader;
4911 +
4912 +typedef struct
4913 +{
4914 + char header[4];
4915 + unsigned int size;
4916 + unsigned int type;
4917 + char majorver[4];
4918 + char minorver[4];
4919 + unsigned char *payload;
4920 +} vctl_entry;
4921 +
4922 +typedef struct
4923 +{
4924 + unsigned char mac[6];
4925 + unsigned char vlanid;
4926 + unsigned char vlanmap;
4927 +} vlaninfo;
4928 +
4929 +#define VCT_VENDORSPEC 0
4930 +#define VCT_BOOTLOADER 1
4931 +#define VCT_KERNEL 2
4932 +#define VCT_VERCTL 3
4933 +#define VCT_CURRCONF 4
4934 +#define VCT_DEFAULTCONF 5
4935 +#define VCT_ROOTFS 6
4936 +#define VCT_APP 7
4937 +#define VCT_VLAN 8
4938 +
4939 +#endif
4940 --- a/drivers/mtd/maps/Makefile
4941 +++ b/drivers/mtd/maps/Makefile
4942 @@ -71,3 +71,7 @@
4943 obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
4944 obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
4945 obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
4946 +###### for Storlink Soc #######
4947 +obj-$(CONFIG_MTD_SL2312_CFI) += sl2312-flash-cfi.o
4948 +obj-$(CONFIG_MTD_SL2312_SERIAL_ATMEL) += sl2312-flash-atmel.o
4949 +obj-$(CONFIG_MTD_SL2312_SERIAL_ST) += sl2312-flash-m25p80.o
Personal OpenWRT clone
This page took 0.252449 seconds and 5 git commands to generate.